1 files changed, 0 insertions, 347 deletions

diff --git a/OpenSim/Region/Physics/BulletSNPlugin/BSMotors.cs b/OpenSim/Region/Physics/BulletSNPlugin/BSMotors.cs
deleted file mode 100644
index 7abc9b2..0000000
--- a/OpenSim/Region/Physics/BulletSNPlugin/BSMotors.cs
+++ /dev/null
@@ -1,347 +0,0 @@
-/*
- * Copyright (c) Contributors, http://opensimulator.org/
- * See CONTRIBUTORS.TXT for a full list of copyright holders.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of the OpenSimulator Project nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE DEVELOPERS ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE CONTRIBUTORS BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- */
-using System;
-using System.Collections.Generic;
-using System.Text;
-using OpenMetaverse;
-using OpenSim.Framework;
-
-namespace OpenSim.Region.Physics.BulletSNPlugin
-{
-public abstract class BSMotor
-{
-    // Timescales and other things can be turned off by setting them to 'infinite'.
-    public const float Infinite = 12345.6f;
-    public readonly static Vector3 InfiniteVector = new Vector3(BSMotor.Infinite, BSMotor.Infinite, BSMotor.Infinite);
-
-    public BSMotor(string useName)
-    {
-        UseName = useName;
-        PhysicsScene = null;
-        Enabled = true;
-    }
-    public virtual bool Enabled { get; set; }
-    public virtual void Reset() { }
-    public virtual void Zero() { }
-    public virtual void GenerateTestOutput(float timeStep) { }
-
-    // A name passed at motor creation for easily identifyable debugging messages.
-    public string UseName { get; private set; }
-
-    // Used only for outputting debug information. Might not be set so check for null.
-    public BSScene PhysicsScene { get; set; }
-    protected void MDetailLog(string msg, params Object[] parms)
-    {
-        if (PhysicsScene != null)
-        {
-            if (PhysicsScene.VehicleLoggingEnabled)
-            {
-                PhysicsScene.DetailLog(msg, parms);
-            }
-        }
-    }
-}
-
-// Motor which moves CurrentValue to TargetValue over TimeScale seconds.
-// The TargetValue decays in TargetValueDecayTimeScale and
-//     the CurrentValue will be held back by FrictionTimeScale.
-// This motor will "zero itself" over time in that the targetValue will
-//    decay to zero and the currentValue will follow it to that zero.
-//    The overall effect is for the returned correction value to go from large
-//    values (the total difference between current and target minus friction)
-//    to small and eventually zero values.
-// TimeScale and TargetDelayTimeScale may be 'infinite' which means no decay.
-
-// For instance, if something is moving at speed X and the desired speed is Y,
-//    CurrentValue is X and TargetValue is Y. As the motor is stepped, new
-//    values of CurrentValue are returned that approach the TargetValue.
-// The feature of decaying TargetValue is so vehicles will eventually
-//    come to a stop rather than run forever. This can be disabled by
-//    setting TargetValueDecayTimescale to 'infinite'.
-// The change from CurrentValue to TargetValue is linear over TimeScale seconds.
-public class BSVMotor : BSMotor
-{
-    // public Vector3 FrameOfReference { get; set; }
-    // public Vector3 Offset { get; set; }
-
-    public virtual float TimeScale { get; set; }
-    public virtual float TargetValueDecayTimeScale { get; set; }
-    public virtual Vector3 FrictionTimescale { get; set; }
-    public virtual float Efficiency { get; set; }
-
-    public virtual float ErrorZeroThreshold { get; set; }
-
-    public virtual Vector3 TargetValue { get; protected set; }
-    public virtual Vector3 CurrentValue { get; protected set; }
-    public virtual Vector3 LastError { get; protected set; }
-
-    public virtual bool ErrorIsZero
-    { get {
-        return (LastError == Vector3.Zero || LastError.LengthSquared() <= ErrorZeroThreshold);
-        }
-    }
-
-    public BSVMotor(string useName)
-        : base(useName)
-    {
-        TimeScale = TargetValueDecayTimeScale = BSMotor.Infinite;
-        Efficiency = 1f;
-        FrictionTimescale = BSMotor.InfiniteVector;
-        CurrentValue = TargetValue = Vector3.Zero;
-        ErrorZeroThreshold = 0.001f;
-    }
-    public BSVMotor(string useName, float timeScale, float decayTimeScale, Vector3 frictionTimeScale, float efficiency) 
-        : this(useName)
-    {
-        TimeScale = timeScale;
-        TargetValueDecayTimeScale = decayTimeScale;
-        FrictionTimescale = frictionTimeScale;
-        Efficiency = efficiency;
-        CurrentValue = TargetValue = Vector3.Zero;
-    }
-    public void SetCurrent(Vector3 current)
-    {
-        CurrentValue = current;
-    }
-    public void SetTarget(Vector3 target)
-    {
-        TargetValue = target;
-    }
-    public override void Zero()
-    {
-        base.Zero();
-        CurrentValue = TargetValue = Vector3.Zero;
-    }
-
-    // Compute the next step and return the new current value
-    public virtual Vector3 Step(float timeStep)
-    {
-        if (!Enabled) return TargetValue;
-
-        Vector3 origTarget = TargetValue;       // DEBUG
-        Vector3 origCurrVal = CurrentValue;     // DEBUG
-
-        Vector3 correction = Vector3.Zero;
-        Vector3 error = TargetValue - CurrentValue;
-        if (!error.ApproxEquals(Vector3.Zero, ErrorZeroThreshold))
-        {
-            correction = Step(timeStep, error);
-
-            CurrentValue += correction;
-
-            // The desired value reduces to zero which also reduces the difference with current.
-            // If the decay time is infinite, don't decay at all.
-            float decayFactor = 0f;
-            if (TargetValueDecayTimeScale != BSMotor.Infinite)
-            {
-                decayFactor = (1.0f / TargetValueDecayTimeScale) * timeStep;
-                TargetValue *= (1f - decayFactor);
-            }
-
-            // The amount we can correct the error is reduced by the friction
-            Vector3 frictionFactor = Vector3.Zero;
-            if (FrictionTimescale != BSMotor.InfiniteVector)
-            {
-                // frictionFactor = (Vector3.One / FrictionTimescale) * timeStep;
-                // Individual friction components can be 'infinite' so compute each separately.
-                frictionFactor.X = (FrictionTimescale.X == BSMotor.Infinite) ? 0f : (1f / FrictionTimescale.X);
-                frictionFactor.Y = (FrictionTimescale.Y == BSMotor.Infinite) ? 0f : (1f / FrictionTimescale.Y);
-                frictionFactor.Z = (FrictionTimescale.Z == BSMotor.Infinite) ? 0f : (1f / FrictionTimescale.Z);
-                frictionFactor *= timeStep;
-                CurrentValue *= (Vector3.One - frictionFactor);
-            }
-
-            MDetailLog("{0},  BSVMotor.Step,nonZero,{1},origCurr={2},origTarget={3},timeStep={4},err={5},corr={6}",
-                                BSScene.DetailLogZero, UseName, origCurrVal, origTarget,
-                                timeStep, error, correction);
-            MDetailLog("{0},  BSVMotor.Step,nonZero,{1},tgtDecayTS={2},decayFact={3},frictTS={4},frictFact={5},tgt={6},curr={7}",
-                                BSScene.DetailLogZero, UseName,
-                                TargetValueDecayTimeScale, decayFactor, FrictionTimescale, frictionFactor,
-                                TargetValue, CurrentValue);
-        }
-        else
-        {
-            // Difference between what we have and target is small. Motor is done.
-            CurrentValue = TargetValue;
-            MDetailLog("{0},  BSVMotor.Step,zero,{1},origTgt={2},origCurr={3},ret={4}",
-                        BSScene.DetailLogZero, UseName, origCurrVal, origTarget, CurrentValue);
-        }
-
-        return CurrentValue;
-    }
-    public virtual Vector3 Step(float timeStep, Vector3 error)
-    {
-        if (!Enabled) return Vector3.Zero;
-
-        LastError = error;
-        Vector3 returnCorrection = Vector3.Zero;
-        if (!error.ApproxEquals(Vector3.Zero, ErrorZeroThreshold))
-        {
-            // correction =  error / secondsItShouldTakeToCorrect
-            Vector3 correctionAmount;
-            if (TimeScale == 0f || TimeScale == BSMotor.Infinite)
-                correctionAmount = error * timeStep;
-            else
-                correctionAmount = error / TimeScale * timeStep;
-
-            returnCorrection = correctionAmount;
-            MDetailLog("{0},  BSVMotor.Step,nonZero,{1},timeStep={2},timeScale={3},err={4},corr={5}",
-                                    BSScene.DetailLogZero, UseName, timeStep, TimeScale, error, correctionAmount);
-        }
-        return returnCorrection;
-    }
-
-    // The user sets all the parameters and calls this which outputs values until error is zero.
-    public override void GenerateTestOutput(float timeStep)
-    {
-        // maximum number of outputs to generate.
-        int maxOutput = 50;
-        MDetailLog("{0},BSVMotor.Test,{1},===================================== BEGIN Test Output", BSScene.DetailLogZero, UseName);
-        MDetailLog("{0},BSVMotor.Test,{1},timeScale={2},targDlyTS={3},frictTS={4},eff={5},curr={6},tgt={7}",
-                                BSScene.DetailLogZero, UseName,
-                                TimeScale, TargetValueDecayTimeScale, FrictionTimescale, Efficiency, 
-                                CurrentValue, TargetValue);
-
-        LastError = BSMotor.InfiniteVector;
-        while (maxOutput-- > 0 && !LastError.ApproxEquals(Vector3.Zero, ErrorZeroThreshold))
-        {
-            Vector3 lastStep = Step(timeStep);
-            MDetailLog("{0},BSVMotor.Test,{1},cur={2},tgt={3},lastError={4},lastStep={5}",
-                            BSScene.DetailLogZero, UseName, CurrentValue, TargetValue, LastError, lastStep);
-        }
-        MDetailLog("{0},BSVMotor.Test,{1},===================================== END Test Output", BSScene.DetailLogZero, UseName);
-        
-
-    }
-
-    public override string ToString()
-    {
-        return String.Format("<{0},curr={1},targ={2},decayTS={3},frictTS={4}>",
-            UseName, CurrentValue, TargetValue, TargetValueDecayTimeScale, FrictionTimescale);
-    }
-}
-
-public class BSFMotor : BSMotor
-{
-    public float TimeScale { get; set; }
-    public float DecayTimeScale { get; set; }
-    public float Friction { get; set; }
-    public float Efficiency { get; set; }
-
-    public float Target { get; private set; }
-    public float CurrentValue { get; private set; }
-
-    public BSFMotor(string useName, float timeScale, float decayTimescale, float friction, float efficiency)
-        : base(useName)
-    {
-    }
-    public void SetCurrent(float target)
-    {
-    }
-    public void SetTarget(float target)
-    {
-    }
-    public virtual float Step(float timeStep)
-    {
-        return 0f;
-    }
-}
-
-// Proportional, Integral, Derivitive Motor
-// Good description at http://www.answers.com/topic/pid-controller . Includes processes for choosing p, i and d factors.
-public class BSPIDVMotor : BSVMotor
-{
-    // Larger makes more overshoot, smaller means converge quicker. Range of 0.1 to 10.
-    public Vector3 proportionFactor { get; set; }
-    public Vector3 integralFactor { get; set; }
-    public Vector3 derivFactor { get; set; }
-
-    // Arbritrary factor range.
-    // EfficiencyHigh means move quickly to the correct number. EfficiencyLow means might over correct.
-    public float EfficiencyHigh = 0.4f;
-    public float EfficiencyLow = 4.0f;
-
-    // Running integration of the error
-    Vector3 RunningIntegration { get; set; }
-
-    public BSPIDVMotor(string useName)
-        : base(useName)
-    {
-        proportionFactor = new Vector3(1.00f, 1.00f, 1.00f);
-        integralFactor = new Vector3(1.00f, 1.00f, 1.00f);
-        derivFactor = new Vector3(1.00f, 1.00f, 1.00f);
-        RunningIntegration = Vector3.Zero;
-        LastError = Vector3.Zero;
-    }
-
-    public override void Zero()
-    {
-        base.Zero();
-    }
-
-    public override float Efficiency
-    {
-        get { return base.Efficiency; }
-        set
-        {
-            base.Efficiency = Util.Clamp(value, 0f, 1f);
-            // Compute factors based on efficiency.
-            // If efficiency is high (1f), use a factor value that moves the error value to zero with little overshoot.
-            // If efficiency is low (0f), use a factor value that overcorrects.
-            // TODO: might want to vary contribution of different factor depending on efficiency.
-            float factor = ((1f - this.Efficiency) * EfficiencyHigh + EfficiencyLow) / 3f;
-            // float factor = (1f - this.Efficiency) * EfficiencyHigh + EfficiencyLow;
-            proportionFactor = new Vector3(factor, factor, factor);
-            integralFactor = new Vector3(factor, factor, factor);
-            derivFactor = new Vector3(factor, factor, factor);
-        }
-    }
-
-    // Ignore Current and Target Values and just advance the PID computation on this error.
-    public override Vector3 Step(float timeStep, Vector3 error)
-    {
-        if (!Enabled) return Vector3.Zero;
-
-        // Add up the error so we can integrate over the accumulated errors
-        RunningIntegration += error * timeStep;
-
-        // A simple derivitive is the rate of change from the last error.
-        Vector3 derivFactor = (error - LastError) * timeStep;
-        LastError = error;
-
-        // Correction = -(proportionOfPresentError +      accumulationOfPastError    +     rateOfChangeOfError)
-        Vector3 ret   = -(
-                          error * proportionFactor
-                        + RunningIntegration * integralFactor 
-                        + derivFactor * derivFactor
-                        );
-
-        return ret;
-    }
-}
-}