aboutsummaryrefslogtreecommitdiffstatshomepage
path: root/doc/doxygen.conf
diff options
context:
space:
mode:
authorSignpostMarv2012-10-29 11:01:34 +0000
committerJustin Clark-Casey (justincc)2013-01-04 21:48:19 +0000
commitbbe5018b95d70c4b1d5be122ef60a746ea24546c (patch)
treea8d51aac121ae9be9f44f6abab95e189ad40fefd /doc/doxygen.conf
parentFixed: the AvatarEnteringNewParcel event wasn't triggered in some cases (diff)
downloadopensim-SC-bbe5018b95d70c4b1d5be122ef60a746ea24546c.zip
opensim-SC-bbe5018b95d70c4b1d5be122ef60a746ea24546c.tar.gz
opensim-SC-bbe5018b95d70c4b1d5be122ef60a746ea24546c.tar.bz2
opensim-SC-bbe5018b95d70c4b1d5be122ef60a746ea24546c.tar.xz
ran doxygen -s -u to upgrade the doxygen config file
Diffstat (limited to '')
-rw-r--r--doc/doxygen.conf1270
1 files changed, 102 insertions, 1168 deletions
diff --git a/doc/doxygen.conf b/doc/doxygen.conf
index 3712dfa..88926a0 100644
--- a/doc/doxygen.conf
+++ b/doc/doxygen.conf
@@ -1,1356 +1,290 @@
1# Doxyfile 1.5.5 1# Doxyfile 1.8.2
2
3# This file describes the settings to be used by the documentation system
4# doxygen (www.doxygen.org) for a project
5#
6# All text after a hash (#) is considered a comment and will be ignored
7# The format is:
8# TAG = value [value, ...]
9# For lists items can also be appended using:
10# TAG += value [value, ...]
11# Values that contain spaces should be placed between quotes (" ")
12 2
13#--------------------------------------------------------------------------- 3#---------------------------------------------------------------------------
14# Project related configuration options 4# Project related configuration options
15#--------------------------------------------------------------------------- 5#---------------------------------------------------------------------------
16
17# This tag specifies the encoding used for all characters in the config file
18# that follow. The default is UTF-8 which is also the encoding used for all
19# text before the first occurrence of this tag. Doxygen uses libiconv (or the
20# iconv built into libc) for the transcoding. See
21# http://www.gnu.org/software/libiconv for the list of possible encodings.
22
23DOXYFILE_ENCODING = UTF-8 6DOXYFILE_ENCODING = UTF-8
24
25# The PROJECT_NAME tag is a single word (or a sequence of words surrounded
26# by quotes) that should identify the project.
27
28PROJECT_NAME = OpenSim 7PROJECT_NAME = OpenSim
29
30# The PROJECT_NUMBER tag can be used to enter a project or revision number.
31# This could be handy for archiving the generated documentation or
32# if some version control system is used.
33
34PROJECT_NUMBER = SVN 8PROJECT_NUMBER = SVN
35 9PROJECT_BRIEF =
36# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) 10PROJECT_LOGO =
37# base path where the generated documentation will be put.
38# If a relative path is entered, it will be relative to the location
39# where doxygen was started. If left blank the current directory will be used.
40
41OUTPUT_DIRECTORY = 11OUTPUT_DIRECTORY =
42
43# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
44# 4096 sub-directories (in 2 levels) under the output directory of each output
45# format and will distribute the generated files over these directories.
46# Enabling this option can be useful when feeding doxygen a huge amount of
47# source files, where putting all generated files in the same directory would
48# otherwise cause performance problems for the file system.
49
50CREATE_SUBDIRS = NO 12CREATE_SUBDIRS = NO
51
52# The OUTPUT_LANGUAGE tag is used to specify the language in which all
53# documentation generated by doxygen is written. Doxygen will use this
54# information to generate all constant output in the proper language.
55# The default language is English, other supported languages are:
56# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
57# Croatian, Czech, Danish, Dutch, Farsi, Finnish, French, German, Greek,
58# Hungarian, Italian, Japanese, Japanese-en (Japanese with English messages),
59# Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, Polish,
60# Portuguese, Romanian, Russian, Serbian, Slovak, Slovene, Spanish, Swedish,
61# and Ukrainian.
62
63OUTPUT_LANGUAGE = English 13OUTPUT_LANGUAGE = English
64
65# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
66# include brief member descriptions after the members that are listed in
67# the file and class documentation (similar to JavaDoc).
68# Set to NO to disable this.
69
70BRIEF_MEMBER_DESC = YES 14BRIEF_MEMBER_DESC = YES
71
72# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
73# the brief description of a member or function before the detailed description.
74# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
75# brief descriptions will be completely suppressed.
76
77REPEAT_BRIEF = YES 15REPEAT_BRIEF = YES
78 16ABBREVIATE_BRIEF =
79# This tag implements a quasi-intelligent brief description abbreviator
80# that is used to form the text in various listings. Each string
81# in this list, if found as the leading text of the brief description, will be
82# stripped from the text and the result after processing the whole list, is
83# used as the annotated text. Otherwise, the brief description is used as-is.
84# If left blank, the following values are used ("$name" is automatically
85# replaced with the name of the entity): "The $name class" "The $name widget"
86# "The $name file" "is" "provides" "specifies" "contains"
87# "represents" "a" "an" "the"
88
89ABBREVIATE_BRIEF =
90
91# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
92# Doxygen will generate a detailed section even if there is only a brief
93# description.
94
95ALWAYS_DETAILED_SEC = NO 17ALWAYS_DETAILED_SEC = NO
96
97# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
98# inherited members of a class in the documentation of that class as if those
99# members were ordinary class members. Constructors, destructors and assignment
100# operators of the base classes will not be shown.
101
102INLINE_INHERITED_MEMB = NO 18INLINE_INHERITED_MEMB = NO
103
104# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
105# path before files name in the file list and in the header files. If set
106# to NO the shortest path that makes the file name unique will be used.
107
108FULL_PATH_NAMES = YES 19FULL_PATH_NAMES = YES
109 20STRIP_FROM_PATH =
110# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag 21STRIP_FROM_INC_PATH =
111# can be used to strip a user-defined part of the path. Stripping is
112# only done if one of the specified strings matches the left-hand part of
113# the path. The tag can be used to show relative paths in the file list.
114# If left blank the directory from which doxygen is run is used as the
115# path to strip.
116
117STRIP_FROM_PATH =
118
119# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
120# the path mentioned in the documentation of a class, which tells
121# the reader which header file to include in order to use a class.
122# If left blank only the name of the header file containing the class
123# definition is used. Otherwise one should specify the include paths that
124# are normally passed to the compiler using the -I flag.
125
126STRIP_FROM_INC_PATH =
127
128# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
129# (but less readable) file names. This can be useful is your file systems
130# doesn't support long names like on DOS, Mac, or CD-ROM.
131
132SHORT_NAMES = NO 22SHORT_NAMES = NO
133
134# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
135# will interpret the first line (until the first dot) of a JavaDoc-style
136# comment as the brief description. If set to NO, the JavaDoc
137# comments will behave just like regular Qt-style comments
138# (thus requiring an explicit @brief command for a brief description.)
139
140JAVADOC_AUTOBRIEF = NO 23JAVADOC_AUTOBRIEF = NO
141
142# If the QT_AUTOBRIEF tag is set to YES then Doxygen will
143# interpret the first line (until the first dot) of a Qt-style
144# comment as the brief description. If set to NO, the comments
145# will behave just like regular Qt-style comments (thus requiring
146# an explicit \brief command for a brief description.)
147
148QT_AUTOBRIEF = NO 24QT_AUTOBRIEF = NO
149
150# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
151# treat a multi-line C++ special comment block (i.e. a block of //! or ///
152# comments) as a brief description. This used to be the default behaviour.
153# The new default is to treat a multi-line C++ comment block as a detailed
154# description. Set this tag to YES if you prefer the old behaviour instead.
155
156MULTILINE_CPP_IS_BRIEF = NO 25MULTILINE_CPP_IS_BRIEF = NO
157
158# If the DETAILS_AT_TOP tag is set to YES then Doxygen
159# will output the detailed description near the top, like JavaDoc.
160# If set to NO, the detailed description appears after the member
161# documentation.
162
163DETAILS_AT_TOP = NO
164
165# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
166# member inherits the documentation from any documented member that it
167# re-implements.
168
169INHERIT_DOCS = YES 26INHERIT_DOCS = YES
170
171# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
172# a new page for each member. If set to NO, the documentation of a member will
173# be part of the file/class/namespace that contains it.
174
175SEPARATE_MEMBER_PAGES = NO 27SEPARATE_MEMBER_PAGES = NO
176
177# The TAB_SIZE tag can be used to set the number of spaces in a tab.
178# Doxygen uses this value to replace tabs by spaces in code fragments.
179
180TAB_SIZE = 8 28TAB_SIZE = 8
181 29ALIASES =
182# This tag can be used to specify a number of aliases that acts 30TCL_SUBST =
183# as commands in the documentation. An alias has the form "name=value".
184# For example adding "sideeffect=\par Side Effects:\n" will allow you to
185# put the command \sideeffect (or @sideeffect) in the documentation, which
186# will result in a user-defined paragraph with heading "Side Effects:".
187# You can put \n's in the value part of an alias to insert newlines.
188
189ALIASES =
190
191# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
192# sources only. Doxygen will then generate output that is more tailored for C.
193# For instance, some of the names that are used will be different. The list
194# of all members will be omitted, etc.
195
196OPTIMIZE_OUTPUT_FOR_C = NO 31OPTIMIZE_OUTPUT_FOR_C = NO
197
198# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
199# sources only. Doxygen will then generate output that is more tailored for
200# Java. For instance, namespaces will be presented as packages, qualified
201# scopes will look different, etc.
202
203OPTIMIZE_OUTPUT_JAVA = NO 32OPTIMIZE_OUTPUT_JAVA = NO
204
205# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
206# sources only. Doxygen will then generate output that is more tailored for
207# Fortran.
208
209OPTIMIZE_FOR_FORTRAN = NO 33OPTIMIZE_FOR_FORTRAN = NO
210
211# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
212# sources. Doxygen will then generate output that is tailored for
213# VHDL.
214
215OPTIMIZE_OUTPUT_VHDL = NO 34OPTIMIZE_OUTPUT_VHDL = NO
216 35EXTENSION_MAPPING =
217# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want 36MARKDOWN_SUPPORT = YES
218# to include (a tag file for) the STL sources as input, then you should 37AUTOLINK_SUPPORT = YES
219# set this tag to YES in order to let doxygen match functions declarations and
220# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
221# func(std::string) {}). This also make the inheritance and collaboration
222# diagrams that involve STL classes more complete and accurate.
223
224BUILTIN_STL_SUPPORT = NO 38BUILTIN_STL_SUPPORT = NO
225
226# If you use Microsoft's C++/CLI language, you should set this option to YES to
227# enable parsing support.
228
229CPP_CLI_SUPPORT = NO 39CPP_CLI_SUPPORT = NO
230
231# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
232# Doxygen will parse them like normal C++ but will assume all classes use public
233# instead of private inheritance when no explicit protection keyword is present.
234
235SIP_SUPPORT = NO 40SIP_SUPPORT = NO
236 41IDL_PROPERTY_SUPPORT = YES
237# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
238# tag is set to YES, then doxygen will reuse the documentation of the first
239# member in the group (if any) for the other members of the group. By default
240# all members of a group must be documented explicitly.
241
242DISTRIBUTE_GROUP_DOC = NO 42DISTRIBUTE_GROUP_DOC = NO
243
244# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
245# the same type (for instance a group of public functions) to be put as a
246# subgroup of that type (e.g. under the Public Functions section). Set it to
247# NO to prevent subgrouping. Alternatively, this can be done per class using
248# the \nosubgrouping command.
249
250SUBGROUPING = YES 43SUBGROUPING = YES
251 44INLINE_GROUPED_CLASSES = NO
252# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum 45INLINE_SIMPLE_STRUCTS = NO
253# is documented as struct, union, or enum with the name of the typedef. So
254# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
255# with name TypeT. When disabled the typedef will appear as a member of a file,
256# namespace, or class. And the struct will be named TypeS. This can typically
257# be useful for C code in case the coding convention dictates that all compound
258# types are typedef'ed and only the typedef is referenced, never the tag name.
259
260TYPEDEF_HIDES_STRUCT = NO 46TYPEDEF_HIDES_STRUCT = NO
261 47SYMBOL_CACHE_SIZE = 0
48LOOKUP_CACHE_SIZE = 0
262#--------------------------------------------------------------------------- 49#---------------------------------------------------------------------------
263# Build related configuration options 50# Build related configuration options
264#--------------------------------------------------------------------------- 51#---------------------------------------------------------------------------
265
266# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
267# documentation are documented, even if no documentation was available.
268# Private class members and static file members will be hidden unless
269# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
270
271EXTRACT_ALL = YES 52EXTRACT_ALL = YES
272
273# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
274# will be included in the documentation.
275
276EXTRACT_PRIVATE = NO 53EXTRACT_PRIVATE = NO
277 54EXTRACT_PACKAGE = NO
278# If the EXTRACT_STATIC tag is set to YES all static members of a file
279# will be included in the documentation.
280
281EXTRACT_STATIC = NO 55EXTRACT_STATIC = NO
282
283# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
284# defined locally in source files will be included in the documentation.
285# If set to NO only classes defined in header files are included.
286
287EXTRACT_LOCAL_CLASSES = YES 56EXTRACT_LOCAL_CLASSES = YES
288
289# This flag is only useful for Objective-C code. When set to YES local
290# methods, which are defined in the implementation section but not in
291# the interface are included in the documentation.
292# If set to NO (the default) only methods in the interface are included.
293
294EXTRACT_LOCAL_METHODS = NO 57EXTRACT_LOCAL_METHODS = NO
295
296# If this flag is set to YES, the members of anonymous namespaces will be
297# extracted and appear in the documentation as a namespace called
298# 'anonymous_namespace{file}', where file will be replaced with the base
299# name of the file that contains the anonymous namespace. By default
300# anonymous namespace are hidden.
301
302EXTRACT_ANON_NSPACES = NO 58EXTRACT_ANON_NSPACES = NO
303
304# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
305# undocumented members of documented classes, files or namespaces.
306# If set to NO (the default) these members will be included in the
307# various overviews, but no documentation section is generated.
308# This option has no effect if EXTRACT_ALL is enabled.
309
310HIDE_UNDOC_MEMBERS = NO 59HIDE_UNDOC_MEMBERS = NO
311
312# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
313# undocumented classes that are normally visible in the class hierarchy.
314# If set to NO (the default) these classes will be included in the various
315# overviews. This option has no effect if EXTRACT_ALL is enabled.
316
317HIDE_UNDOC_CLASSES = NO 60HIDE_UNDOC_CLASSES = NO
318
319# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
320# friend (class|struct|union) declarations.
321# If set to NO (the default) these declarations will be included in the
322# documentation.
323
324HIDE_FRIEND_COMPOUNDS = NO 61HIDE_FRIEND_COMPOUNDS = NO
325
326# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
327# documentation blocks found inside the body of a function.
328# If set to NO (the default) these blocks will be appended to the
329# function's detailed documentation block.
330
331HIDE_IN_BODY_DOCS = NO 62HIDE_IN_BODY_DOCS = NO
332
333# The INTERNAL_DOCS tag determines if documentation
334# that is typed after a \internal command is included. If the tag is set
335# to NO (the default) then the documentation will be excluded.
336# Set it to YES to include the internal documentation.
337
338INTERNAL_DOCS = NO 63INTERNAL_DOCS = NO
339
340# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
341# file names in lower-case letters. If set to YES upper-case letters are also
342# allowed. This is useful if you have classes or files whose names only differ
343# in case and if your file system supports case sensitive file names. Windows
344# and Mac users are advised to set this option to NO.
345
346CASE_SENSE_NAMES = YES 64CASE_SENSE_NAMES = YES
347
348# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
349# will show members with their full class and namespace scopes in the
350# documentation. If set to YES the scope will be hidden.
351
352HIDE_SCOPE_NAMES = NO 65HIDE_SCOPE_NAMES = NO
353
354# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
355# will put a list of the files that are included by a file in the documentation
356# of that file.
357
358SHOW_INCLUDE_FILES = YES 66SHOW_INCLUDE_FILES = YES
359 67FORCE_LOCAL_INCLUDES = NO
360# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
361# is inserted in the documentation for inline members.
362
363INLINE_INFO = YES 68INLINE_INFO = YES
364
365# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
366# will sort the (detailed) documentation of file and class members
367# alphabetically by member name. If set to NO the members will appear in
368# declaration order.
369
370SORT_MEMBER_DOCS = YES 69SORT_MEMBER_DOCS = YES
371
372# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
373# brief documentation of file, namespace and class members alphabetically
374# by member name. If set to NO (the default) the members will appear in
375# declaration order.
376
377SORT_BRIEF_DOCS = NO 70SORT_BRIEF_DOCS = NO
378 71SORT_MEMBERS_CTORS_1ST = NO
379# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
380# hierarchy of group names into alphabetical order. If set to NO (the default)
381# the group names will appear in their defined order.
382
383SORT_GROUP_NAMES = NO 72SORT_GROUP_NAMES = NO
384
385# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
386# sorted by fully-qualified names, including namespaces. If set to
387# NO (the default), the class list will be sorted only by class name,
388# not including the namespace part.
389# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
390# Note: This option applies only to the class list, not to the
391# alphabetical list.
392
393SORT_BY_SCOPE_NAME = NO 73SORT_BY_SCOPE_NAME = NO
394 74STRICT_PROTO_MATCHING = NO
395# The GENERATE_TODOLIST tag can be used to enable (YES) or
396# disable (NO) the todo list. This list is created by putting \todo
397# commands in the documentation.
398
399GENERATE_TODOLIST = YES 75GENERATE_TODOLIST = YES
400
401# The GENERATE_TESTLIST tag can be used to enable (YES) or
402# disable (NO) the test list. This list is created by putting \test
403# commands in the documentation.
404
405GENERATE_TESTLIST = YES 76GENERATE_TESTLIST = YES
406
407# The GENERATE_BUGLIST tag can be used to enable (YES) or
408# disable (NO) the bug list. This list is created by putting \bug
409# commands in the documentation.
410
411GENERATE_BUGLIST = YES 77GENERATE_BUGLIST = YES
412
413# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
414# disable (NO) the deprecated list. This list is created by putting
415# \deprecated commands in the documentation.
416
417GENERATE_DEPRECATEDLIST= YES 78GENERATE_DEPRECATEDLIST= YES
418 79ENABLED_SECTIONS =
419# The ENABLED_SECTIONS tag can be used to enable conditional
420# documentation sections, marked by \if sectionname ... \endif.
421
422ENABLED_SECTIONS =
423
424# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
425# the initial value of a variable or define consists of for it to appear in
426# the documentation. If the initializer consists of more lines than specified
427# here it will be hidden. Use a value of 0 to hide initializers completely.
428# The appearance of the initializer of individual variables and defines in the
429# documentation can be controlled using \showinitializer or \hideinitializer
430# command in the documentation regardless of this setting.
431
432MAX_INITIALIZER_LINES = 30 80MAX_INITIALIZER_LINES = 30
433
434# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
435# at the bottom of the documentation of classes and structs. If set to YES the
436# list will mention the files that were used to generate the documentation.
437
438SHOW_USED_FILES = YES 81SHOW_USED_FILES = YES
439 82SHOW_FILES = YES
440# If the sources in your project are distributed over multiple directories 83SHOW_NAMESPACES = YES
441# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy 84FILE_VERSION_FILTER =
442# in the documentation. The default is NO. 85LAYOUT_FILE =
443 86CITE_BIB_FILES =
444SHOW_DIRECTORIES = NO
445
446# The FILE_VERSION_FILTER tag can be used to specify a program or script that
447# doxygen should invoke to get the current version for each file (typically from
448# the version control system). Doxygen will invoke the program by executing (via
449# popen()) the command <command> <input-file>, where <command> is the value of
450# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
451# provided by doxygen. Whatever the program writes to standard output
452# is used as the file version. See the manual for examples.
453
454FILE_VERSION_FILTER =
455
456#--------------------------------------------------------------------------- 87#---------------------------------------------------------------------------
457# configuration options related to warning and progress messages 88# configuration options related to warning and progress messages
458#--------------------------------------------------------------------------- 89#---------------------------------------------------------------------------
459
460# The QUIET tag can be used to turn on/off the messages that are generated
461# by doxygen. Possible values are YES and NO. If left blank NO is used.
462
463QUIET = NO 90QUIET = NO
464
465# The WARNINGS tag can be used to turn on/off the warning messages that are
466# generated by doxygen. Possible values are YES and NO. If left blank
467# NO is used.
468
469WARNINGS = YES 91WARNINGS = YES
470
471# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
472# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
473# automatically be disabled.
474
475WARN_IF_UNDOCUMENTED = YES 92WARN_IF_UNDOCUMENTED = YES
476
477# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
478# potential errors in the documentation, such as not documenting some
479# parameters in a documented function, or documenting parameters that
480# don't exist or using markup commands wrongly.
481
482WARN_IF_DOC_ERROR = YES 93WARN_IF_DOC_ERROR = YES
483
484# This WARN_NO_PARAMDOC option can be abled to get warnings for
485# functions that are documented, but have no documentation for their parameters
486# or return value. If set to NO (the default) doxygen will only warn about
487# wrong or incomplete parameter documentation, but not about the absence of
488# documentation.
489
490WARN_NO_PARAMDOC = NO 94WARN_NO_PARAMDOC = NO
491
492# The WARN_FORMAT tag determines the format of the warning messages that
493# doxygen can produce. The string should contain the $file, $line, and $text
494# tags, which will be replaced by the file and line number from which the
495# warning originated and the warning text. Optionally the format may contain
496# $version, which will be replaced by the version of the file (if it could
497# be obtained via FILE_VERSION_FILTER)
498
499WARN_FORMAT = "$file:$line: $text" 95WARN_FORMAT = "$file:$line: $text"
500 96WARN_LOGFILE =
501# The WARN_LOGFILE tag can be used to specify a file to which warning
502# and error messages should be written. If left blank the output is written
503# to stderr.
504
505WARN_LOGFILE =
506
507#--------------------------------------------------------------------------- 97#---------------------------------------------------------------------------
508# configuration options related to the input files 98# configuration options related to the input files
509#--------------------------------------------------------------------------- 99#---------------------------------------------------------------------------
510
511# The INPUT tag can be used to specify the files and/or directories that contain
512# documented source files. You may enter file names like "myfile.cpp" or
513# directories like "/usr/src/myproject". Separate the files or directories
514# with spaces.
515
516INPUT = ../OpenSim 100INPUT = ../OpenSim
517
518# This tag can be used to specify the character encoding of the source files
519# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
520# also the default input encoding. Doxygen uses libiconv (or the iconv built
521# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
522# the list of possible encodings.
523
524INPUT_ENCODING = UTF-8 101INPUT_ENCODING = UTF-8
525 102FILE_PATTERNS =
526# If the value of the INPUT tag contains directories, you can use the
527# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
528# and *.h) to filter out the source-files in the directories. If left
529# blank the following patterns are tested:
530# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx
531# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90
532
533FILE_PATTERNS =
534
535# The RECURSIVE tag can be used to turn specify whether or not subdirectories
536# should be searched for input files as well. Possible values are YES and NO.
537# If left blank NO is used.
538
539RECURSIVE = YES 103RECURSIVE = YES
540
541# The EXCLUDE tag can be used to specify files and/or directories that should
542# excluded from the INPUT source files. This way you can easily exclude a
543# subdirectory from a directory tree whose root is specified with the INPUT tag.
544
545EXCLUDE = 104EXCLUDE =
546
547# The EXCLUDE_SYMLINKS tag can be used select whether or not files or
548# directories that are symbolic links (a Unix filesystem feature) are excluded
549# from the input.
550
551EXCLUDE_SYMLINKS = NO 105EXCLUDE_SYMLINKS = NO
552 106EXCLUDE_PATTERNS =
553# If the value of the INPUT tag contains directories, you can use the 107EXCLUDE_SYMBOLS =
554# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude 108EXAMPLE_PATH =
555# certain files from those directories. Note that the wildcards are matched 109EXAMPLE_PATTERNS =
556# against the file with absolute path, so to exclude all test directories
557# for example use the pattern */test/*
558
559EXCLUDE_PATTERNS =
560
561# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
562# (namespaces, classes, functions, etc.) that should be excluded from the
563# output. The symbol name can be a fully qualified name, a word, or if the
564# wildcard * is used, a substring. Examples: ANamespace, AClass,
565# AClass::ANamespace, ANamespace::*Test
566
567EXCLUDE_SYMBOLS =
568
569# The EXAMPLE_PATH tag can be used to specify one or more files or
570# directories that contain example code fragments that are included (see
571# the \include command).
572
573EXAMPLE_PATH =
574
575# If the value of the EXAMPLE_PATH tag contains directories, you can use the
576# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
577# and *.h) to filter out the source-files in the directories. If left
578# blank all files are included.
579
580EXAMPLE_PATTERNS =
581
582# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
583# searched for input files to be used with the \include or \dontinclude
584# commands irrespective of the value of the RECURSIVE tag.
585# Possible values are YES and NO. If left blank NO is used.
586
587EXAMPLE_RECURSIVE = NO 110EXAMPLE_RECURSIVE = NO
588 111IMAGE_PATH =
589# The IMAGE_PATH tag can be used to specify one or more files or 112INPUT_FILTER =
590# directories that contain image that are included in the documentation (see 113FILTER_PATTERNS =
591# the \image command).
592
593IMAGE_PATH =
594
595# The INPUT_FILTER tag can be used to specify a program that doxygen should
596# invoke to filter for each input file. Doxygen will invoke the filter program
597# by executing (via popen()) the command <filter> <input-file>, where <filter>
598# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
599# input file. Doxygen will then use the output that the filter program writes
600# to standard output. If FILTER_PATTERNS is specified, this tag will be
601# ignored.
602
603INPUT_FILTER =
604
605# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
606# basis. Doxygen will compare the file name with each pattern and apply the
607# filter if there is a match. The filters are a list of the form:
608# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
609# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER
610# is applied to all files.
611
612FILTER_PATTERNS =
613
614# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
615# INPUT_FILTER) will be used to filter the input files when producing source
616# files to browse (i.e. when SOURCE_BROWSER is set to YES).
617
618FILTER_SOURCE_FILES = NO 114FILTER_SOURCE_FILES = NO
619 115FILTER_SOURCE_PATTERNS =
620#--------------------------------------------------------------------------- 116#---------------------------------------------------------------------------
621# configuration options related to source browsing 117# configuration options related to source browsing
622#--------------------------------------------------------------------------- 118#---------------------------------------------------------------------------
623
624# If the SOURCE_BROWSER tag is set to YES then a list of source files will
625# be generated. Documented entities will be cross-referenced with these sources.
626# Note: To get rid of all source code in the generated output, make sure also
627# VERBATIM_HEADERS is set to NO.
628
629SOURCE_BROWSER = NO 119SOURCE_BROWSER = NO
630
631# Setting the INLINE_SOURCES tag to YES will include the body
632# of functions and classes directly in the documentation.
633
634INLINE_SOURCES = NO 120INLINE_SOURCES = NO
635
636# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
637# doxygen to hide any special comment blocks from generated source code
638# fragments. Normal C and C++ comments will always remain visible.
639
640STRIP_CODE_COMMENTS = YES 121STRIP_CODE_COMMENTS = YES
641
642# If the REFERENCED_BY_RELATION tag is set to YES (the default)
643# then for each documented function all documented
644# functions referencing it will be listed.
645
646REFERENCED_BY_RELATION = NO 122REFERENCED_BY_RELATION = NO
647
648# If the REFERENCES_RELATION tag is set to YES (the default)
649# then for each documented function all documented entities
650# called/used by that function will be listed.
651
652REFERENCES_RELATION = NO 123REFERENCES_RELATION = NO
653
654# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
655# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
656# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
657# link to the source code. Otherwise they will link to the documentstion.
658
659REFERENCES_LINK_SOURCE = YES 124REFERENCES_LINK_SOURCE = YES
660
661# If the USE_HTAGS tag is set to YES then the references to source code
662# will point to the HTML generated by the htags(1) tool instead of doxygen
663# built-in source browser. The htags tool is part of GNU's global source
664# tagging system (see http://www.gnu.org/software/global/global.html). You
665# will need version 4.8.6 or higher.
666
667USE_HTAGS = NO 125USE_HTAGS = NO
668
669# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
670# will generate a verbatim copy of the header file for each class for
671# which an include is specified. Set to NO to disable this.
672
673VERBATIM_HEADERS = YES 126VERBATIM_HEADERS = YES
674
675#--------------------------------------------------------------------------- 127#---------------------------------------------------------------------------
676# configuration options related to the alphabetical class index 128# configuration options related to the alphabetical class index
677#--------------------------------------------------------------------------- 129#---------------------------------------------------------------------------
678
679# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
680# of all compounds will be generated. Enable this if the project
681# contains a lot of classes, structs, unions or interfaces.
682
683ALPHABETICAL_INDEX = NO 130ALPHABETICAL_INDEX = NO
684
685# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
686# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
687# in which this list will be split (can be a number in the range [1..20])
688
689COLS_IN_ALPHA_INDEX = 5 131COLS_IN_ALPHA_INDEX = 5
690 132IGNORE_PREFIX =
691# In case all classes in a project start with a common prefix, all
692# classes will be put under the same header in the alphabetical index.
693# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
694# should be ignored while generating the index headers.
695
696IGNORE_PREFIX =
697
698#--------------------------------------------------------------------------- 133#---------------------------------------------------------------------------
699# configuration options related to the HTML output 134# configuration options related to the HTML output
700#--------------------------------------------------------------------------- 135#---------------------------------------------------------------------------
701
702# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
703# generate HTML output.
704
705GENERATE_HTML = YES 136GENERATE_HTML = YES
706
707# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
708# If a relative path is entered the value of OUTPUT_DIRECTORY will be
709# put in front of it. If left blank `html' will be used as the default path.
710
711HTML_OUTPUT = html 137HTML_OUTPUT = html
712
713# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
714# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
715# doxygen will generate files with .html extension.
716
717HTML_FILE_EXTENSION = .html 138HTML_FILE_EXTENSION = .html
718 139HTML_HEADER =
719# The HTML_HEADER tag can be used to specify a personal HTML header for 140HTML_FOOTER =
720# each generated HTML page. If it is left blank doxygen will generate a 141HTML_STYLESHEET =
721# standard header. 142HTML_EXTRA_STYLESHEET =
722 143HTML_EXTRA_FILES =
723HTML_HEADER = 144HTML_COLORSTYLE_HUE = 220
724 145HTML_COLORSTYLE_SAT = 100
725# The HTML_FOOTER tag can be used to specify a personal HTML footer for 146HTML_COLORSTYLE_GAMMA = 80
726# each generated HTML page. If it is left blank doxygen will generate a 147HTML_TIMESTAMP = YES
727# standard footer. 148HTML_DYNAMIC_SECTIONS = NO
728 149HTML_INDEX_NUM_ENTRIES = 100
729HTML_FOOTER =
730
731# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
732# style sheet that is used by each HTML page. It can be used to
733# fine-tune the look of the HTML output. If the tag is left blank doxygen
734# will generate a default style sheet. Note that doxygen will try to copy
735# the style sheet file to the HTML output directory, so don't put your own
736# stylesheet in the HTML output directory as well, or it will be erased!
737
738HTML_STYLESHEET =
739
740# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
741# files or namespaces will be aligned in HTML using tables. If set to
742# NO a bullet list will be used.
743
744HTML_ALIGN_MEMBERS = YES
745
746# If the GENERATE_HTMLHELP tag is set to YES, additional index files
747# will be generated that can be used as input for tools like the
748# Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
749# of the generated HTML documentation.
750
751GENERATE_HTMLHELP = NO
752
753# If the GENERATE_DOCSET tag is set to YES, additional index files
754# will be generated that can be used as input for Apple's Xcode 3
755# integrated development environment, introduced with OSX 10.5 (Leopard).
756# To create a documentation set, doxygen will generate a Makefile in the
757# HTML output directory. Running make will produce the docset in that
758# directory and running "make install" will install the docset in
759# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
760# it at startup.
761
762GENERATE_DOCSET = NO 150GENERATE_DOCSET = NO
763
764# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
765# feed. A documentation feed provides an umbrella under which multiple
766# documentation sets from a single provider (such as a company or product suite)
767# can be grouped.
768
769DOCSET_FEEDNAME = "Doxygen generated docs" 151DOCSET_FEEDNAME = "Doxygen generated docs"
770
771# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
772# should uniquely identify the documentation set bundle. This should be a
773# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
774# will append .docset to the name.
775
776DOCSET_BUNDLE_ID = org.doxygen.Project 152DOCSET_BUNDLE_ID = org.doxygen.Project
777 153DOCSET_PUBLISHER_ID = org.doxygen.Publisher
778# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML 154DOCSET_PUBLISHER_NAME = Publisher
779# documentation will contain sections that can be hidden and shown after the 155GENERATE_HTMLHELP = NO
780# page has loaded. For this to work a browser that supports 156CHM_FILE =
781# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox 157HHC_LOCATION =
782# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
783
784HTML_DYNAMIC_SECTIONS = NO
785
786# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
787# be used to specify the file name of the resulting .chm file. You
788# can add a path in front of the file if the result should not be
789# written to the html output directory.
790
791CHM_FILE =
792
793# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
794# be used to specify the location (absolute path including file name) of
795# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
796# the HTML help compiler on the generated index.hhp.
797
798HHC_LOCATION =
799
800# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
801# controls if a separate .chi index file is generated (YES) or that
802# it should be included in the master .chm file (NO).
803
804GENERATE_CHI = NO 158GENERATE_CHI = NO
805 159CHM_INDEX_ENCODING =
806# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
807# controls whether a binary table of contents is generated (YES) or a
808# normal table of contents (NO) in the .chm file.
809
810BINARY_TOC = NO 160BINARY_TOC = NO
811
812# The TOC_EXPAND flag can be set to YES to add extra items for group members
813# to the contents of the HTML help documentation and to the tree view.
814
815TOC_EXPAND = NO 161TOC_EXPAND = NO
816 162GENERATE_QHP = NO
817# The DISABLE_INDEX tag can be used to turn on/off the condensed index at 163QCH_FILE =
818# top of each HTML page. The value NO (the default) enables the index and 164QHP_NAMESPACE = org.doxygen.Project
819# the value YES disables it. 165QHP_VIRTUAL_FOLDER = doc
820 166QHP_CUST_FILTER_NAME =
167QHP_CUST_FILTER_ATTRS =
168QHP_SECT_FILTER_ATTRS =
169QHG_LOCATION =
170GENERATE_ECLIPSEHELP = NO
171ECLIPSE_DOC_ID = org.doxygen.Project
821DISABLE_INDEX = NO 172DISABLE_INDEX = NO
822
823# This tag can be used to set the number of enum values (range [1..20])
824# that doxygen will group on one line in the generated HTML documentation.
825
826ENUM_VALUES_PER_LINE = 4
827
828# If the GENERATE_TREEVIEW tag is set to YES, a side panel will be
829# generated containing a tree-like index structure (just like the one that
830# is generated for HTML Help). For this to work a browser that supports
831# JavaScript, DHTML, CSS and frames is required (for instance Mozilla 1.0+,
832# Netscape 6.0+, Internet explorer 5.0+, or Konqueror). Windows users are
833# probably better off using the HTML help feature.
834
835GENERATE_TREEVIEW = NO 173GENERATE_TREEVIEW = NO
836 174ENUM_VALUES_PER_LINE = 4
837# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
838# used to set the initial width (in pixels) of the frame in which the tree
839# is shown.
840
841TREEVIEW_WIDTH = 250 175TREEVIEW_WIDTH = 250
842 176EXT_LINKS_IN_WINDOW = NO
177FORMULA_FONTSIZE = 10
178FORMULA_TRANSPARENT = YES
179USE_MATHJAX = NO
180MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest
181MATHJAX_EXTENSIONS =
182SEARCHENGINE = YES
183SERVER_BASED_SEARCH = NO
843#--------------------------------------------------------------------------- 184#---------------------------------------------------------------------------
844# configuration options related to the LaTeX output 185# configuration options related to the LaTeX output
845#--------------------------------------------------------------------------- 186#---------------------------------------------------------------------------
846
847# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
848# generate Latex output.
849
850GENERATE_LATEX = NO 187GENERATE_LATEX = NO
851
852# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
853# If a relative path is entered the value of OUTPUT_DIRECTORY will be
854# put in front of it. If left blank `latex' will be used as the default path.
855
856LATEX_OUTPUT = latex 188LATEX_OUTPUT = latex
857
858# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
859# invoked. If left blank `latex' will be used as the default command name.
860
861LATEX_CMD_NAME = latex 189LATEX_CMD_NAME = latex
862
863# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
864# generate index for LaTeX. If left blank `makeindex' will be used as the
865# default command name.
866
867MAKEINDEX_CMD_NAME = makeindex 190MAKEINDEX_CMD_NAME = makeindex
868
869# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
870# LaTeX documents. This may be useful for small projects and may help to
871# save some trees in general.
872
873COMPACT_LATEX = NO 191COMPACT_LATEX = NO
874
875# The PAPER_TYPE tag can be used to set the paper type that is used
876# by the printer. Possible values are: a4, a4wide, letter, legal and
877# executive. If left blank a4wide will be used.
878
879PAPER_TYPE = a4wide 192PAPER_TYPE = a4wide
880 193EXTRA_PACKAGES =
881# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX 194LATEX_HEADER =
882# packages that should be included in the LaTeX output. 195LATEX_FOOTER =
883
884EXTRA_PACKAGES =
885
886# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
887# the generated latex document. The header should contain everything until
888# the first chapter. If it is left blank doxygen will generate a
889# standard header. Notice: only use this tag if you know what you are doing!
890
891LATEX_HEADER =
892
893# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
894# is prepared for conversion to pdf (using ps2pdf). The pdf file will
895# contain links (just like the HTML output) instead of page references
896# This makes the output suitable for online browsing using a pdf viewer.
897
898PDF_HYPERLINKS = YES 196PDF_HYPERLINKS = YES
899
900# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
901# plain latex in the generated Makefile. Set this option to YES to get a
902# higher quality PDF documentation.
903
904USE_PDFLATEX = YES 197USE_PDFLATEX = YES
905
906# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
907# command to the generated LaTeX files. This will instruct LaTeX to keep
908# running if errors occur, instead of asking the user for help.
909# This option is also used when generating formulas in HTML.
910
911LATEX_BATCHMODE = NO 198LATEX_BATCHMODE = NO
912
913# If LATEX_HIDE_INDICES is set to YES then doxygen will not
914# include the index chapters (such as File Index, Compound Index, etc.)
915# in the output.
916
917LATEX_HIDE_INDICES = NO 199LATEX_HIDE_INDICES = NO
918 200LATEX_SOURCE_CODE = NO
201LATEX_BIB_STYLE = plain
919#--------------------------------------------------------------------------- 202#---------------------------------------------------------------------------
920# configuration options related to the RTF output 203# configuration options related to the RTF output
921#--------------------------------------------------------------------------- 204#---------------------------------------------------------------------------
922
923# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
924# The RTF output is optimized for Word 97 and may not look very pretty with
925# other RTF readers or editors.
926
927GENERATE_RTF = NO 205GENERATE_RTF = NO
928
929# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
930# If a relative path is entered the value of OUTPUT_DIRECTORY will be
931# put in front of it. If left blank `rtf' will be used as the default path.
932
933RTF_OUTPUT = rtf 206RTF_OUTPUT = rtf
934
935# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
936# RTF documents. This may be useful for small projects and may help to
937# save some trees in general.
938
939COMPACT_RTF = NO 207COMPACT_RTF = NO
940
941# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
942# will contain hyperlink fields. The RTF file will
943# contain links (just like the HTML output) instead of page references.
944# This makes the output suitable for online browsing using WORD or other
945# programs which support those fields.
946# Note: wordpad (write) and others do not support links.
947
948RTF_HYPERLINKS = NO 208RTF_HYPERLINKS = NO
949 209RTF_STYLESHEET_FILE =
950# Load stylesheet definitions from file. Syntax is similar to doxygen's 210RTF_EXTENSIONS_FILE =
951# config file, i.e. a series of assignments. You only have to provide
952# replacements, missing definitions are set to their default value.
953
954RTF_STYLESHEET_FILE =
955
956# Set optional variables used in the generation of an rtf document.
957# Syntax is similar to doxygen's config file.
958
959RTF_EXTENSIONS_FILE =
960
961#--------------------------------------------------------------------------- 211#---------------------------------------------------------------------------
962# configuration options related to the man page output 212# configuration options related to the man page output
963#--------------------------------------------------------------------------- 213#---------------------------------------------------------------------------
964
965# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
966# generate man pages
967
968GENERATE_MAN = NO 214GENERATE_MAN = NO
969
970# The MAN_OUTPUT tag is used to specify where the man pages will be put.
971# If a relative path is entered the value of OUTPUT_DIRECTORY will be
972# put in front of it. If left blank `man' will be used as the default path.
973
974MAN_OUTPUT = man 215MAN_OUTPUT = man
975
976# The MAN_EXTENSION tag determines the extension that is added to
977# the generated man pages (default is the subroutine's section .3)
978
979MAN_EXTENSION = .3 216MAN_EXTENSION = .3
980
981# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
982# then it will generate one additional man file for each entity
983# documented in the real man page(s). These additional files
984# only source the real man page, but without them the man command
985# would be unable to find the correct page. The default is NO.
986
987MAN_LINKS = NO 217MAN_LINKS = NO
988
989#--------------------------------------------------------------------------- 218#---------------------------------------------------------------------------
990# configuration options related to the XML output 219# configuration options related to the XML output
991#--------------------------------------------------------------------------- 220#---------------------------------------------------------------------------
992
993# If the GENERATE_XML tag is set to YES Doxygen will
994# generate an XML file that captures the structure of
995# the code including all documentation.
996
997GENERATE_XML = NO 221GENERATE_XML = NO
998
999# The XML_OUTPUT tag is used to specify where the XML pages will be put.
1000# If a relative path is entered the value of OUTPUT_DIRECTORY will be
1001# put in front of it. If left blank `xml' will be used as the default path.
1002
1003XML_OUTPUT = xml 222XML_OUTPUT = xml
1004 223XML_SCHEMA =
1005# The XML_SCHEMA tag can be used to specify an XML schema, 224XML_DTD =
1006# which can be used by a validating XML parser to check the
1007# syntax of the XML files.
1008
1009XML_SCHEMA =
1010
1011# The XML_DTD tag can be used to specify an XML DTD,
1012# which can be used by a validating XML parser to check the
1013# syntax of the XML files.
1014
1015XML_DTD =
1016
1017# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
1018# dump the program listings (including syntax highlighting
1019# and cross-referencing information) to the XML output. Note that
1020# enabling this will significantly increase the size of the XML output.
1021
1022XML_PROGRAMLISTING = YES 225XML_PROGRAMLISTING = YES
1023
1024#--------------------------------------------------------------------------- 226#---------------------------------------------------------------------------
1025# configuration options for the AutoGen Definitions output 227# configuration options for the AutoGen Definitions output
1026#--------------------------------------------------------------------------- 228#---------------------------------------------------------------------------
1027
1028# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
1029# generate an AutoGen Definitions (see autogen.sf.net) file
1030# that captures the structure of the code including all
1031# documentation. Note that this feature is still experimental
1032# and incomplete at the moment.
1033
1034GENERATE_AUTOGEN_DEF = NO 229GENERATE_AUTOGEN_DEF = NO
1035
1036#--------------------------------------------------------------------------- 230#---------------------------------------------------------------------------
1037# configuration options related to the Perl module output 231# configuration options related to the Perl module output
1038#--------------------------------------------------------------------------- 232#---------------------------------------------------------------------------
1039
1040# If the GENERATE_PERLMOD tag is set to YES Doxygen will
1041# generate a Perl module file that captures the structure of
1042# the code including all documentation. Note that this
1043# feature is still experimental and incomplete at the
1044# moment.
1045
1046GENERATE_PERLMOD = NO 233GENERATE_PERLMOD = NO
1047
1048# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
1049# the necessary Makefile rules, Perl scripts and LaTeX code to be able
1050# to generate PDF and DVI output from the Perl module output.
1051
1052PERLMOD_LATEX = NO 234PERLMOD_LATEX = NO
1053
1054# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
1055# nicely formatted so it can be parsed by a human reader. This is useful
1056# if you want to understand what is going on. On the other hand, if this
1057# tag is set to NO the size of the Perl module output will be much smaller
1058# and Perl will parse it just the same.
1059
1060PERLMOD_PRETTY = YES 235PERLMOD_PRETTY = YES
1061 236PERLMOD_MAKEVAR_PREFIX =
1062# The names of the make variables in the generated doxyrules.make file
1063# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
1064# This is useful so different doxyrules.make files included by the same
1065# Makefile don't overwrite each other's variables.
1066
1067PERLMOD_MAKEVAR_PREFIX =
1068
1069#--------------------------------------------------------------------------- 237#---------------------------------------------------------------------------
1070# Configuration options related to the preprocessor 238# Configuration options related to the preprocessor
1071#--------------------------------------------------------------------------- 239#---------------------------------------------------------------------------
1072
1073# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
1074# evaluate all C-preprocessor directives found in the sources and include
1075# files.
1076
1077ENABLE_PREPROCESSING = YES 240ENABLE_PREPROCESSING = YES
1078
1079# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
1080# names in the source code. If set to NO (the default) only conditional
1081# compilation will be performed. Macro expansion can be done in a controlled
1082# way by setting EXPAND_ONLY_PREDEF to YES.
1083
1084MACRO_EXPANSION = NO 241MACRO_EXPANSION = NO
1085
1086# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
1087# then the macro expansion is limited to the macros specified with the
1088# PREDEFINED and EXPAND_AS_DEFINED tags.
1089
1090EXPAND_ONLY_PREDEF = NO 242EXPAND_ONLY_PREDEF = NO
1091
1092# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
1093# in the INCLUDE_PATH (see below) will be search if a #include is found.
1094
1095SEARCH_INCLUDES = YES 243SEARCH_INCLUDES = YES
1096 244INCLUDE_PATH =
1097# The INCLUDE_PATH tag can be used to specify one or more directories that 245INCLUDE_FILE_PATTERNS =
1098# contain include files that are not input files but should be processed by 246PREDEFINED =
1099# the preprocessor. 247EXPAND_AS_DEFINED =
1100
1101INCLUDE_PATH =
1102
1103# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
1104# patterns (like *.h and *.hpp) to filter out the header-files in the
1105# directories. If left blank, the patterns specified with FILE_PATTERNS will
1106# be used.
1107
1108INCLUDE_FILE_PATTERNS =
1109
1110# The PREDEFINED tag can be used to specify one or more macro names that
1111# are defined before the preprocessor is started (similar to the -D option of
1112# gcc). The argument of the tag is a list of macros of the form: name
1113# or name=definition (no spaces). If the definition and the = are
1114# omitted =1 is assumed. To prevent a macro definition from being
1115# undefined via #undef or recursively expanded use the := operator
1116# instead of the = operator.
1117
1118PREDEFINED =
1119
1120# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
1121# this tag can be used to specify a list of macro names that should be expanded.
1122# The macro definition that is found in the sources will be used.
1123# Use the PREDEFINED tag if you want to use a different macro definition.
1124
1125EXPAND_AS_DEFINED =
1126
1127# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
1128# doxygen's preprocessor will remove all function-like macros that are alone
1129# on a line, have an all uppercase name, and do not end with a semicolon. Such
1130# function macros are typically used for boiler-plate code, and will confuse
1131# the parser if not removed.
1132
1133SKIP_FUNCTION_MACROS = YES 248SKIP_FUNCTION_MACROS = YES
1134
1135#--------------------------------------------------------------------------- 249#---------------------------------------------------------------------------
1136# Configuration::additions related to external references 250# Configuration::additions related to external references
1137#--------------------------------------------------------------------------- 251#---------------------------------------------------------------------------
1138 252TAGFILES =
1139# The TAGFILES option can be used to specify one or more tagfiles. 253GENERATE_TAGFILE =
1140# Optionally an initial location of the external documentation
1141# can be added for each tagfile. The format of a tag file without
1142# this location is as follows:
1143# TAGFILES = file1 file2 ...
1144# Adding location for the tag files is done as follows:
1145# TAGFILES = file1=loc1 "file2 = loc2" ...
1146# where "loc1" and "loc2" can be relative or absolute paths or
1147# URLs. If a location is present for each tag, the installdox tool
1148# does not have to be run to correct the links.
1149# Note that each tag file must have a unique name
1150# (where the name does NOT include the path)
1151# If a tag file is not located in the directory in which doxygen
1152# is run, you must also specify the path to the tagfile here.
1153
1154TAGFILES =
1155
1156# When a file name is specified after GENERATE_TAGFILE, doxygen will create
1157# a tag file that is based on the input files it reads.
1158
1159GENERATE_TAGFILE =
1160
1161# If the ALLEXTERNALS tag is set to YES all external classes will be listed
1162# in the class index. If set to NO only the inherited external classes
1163# will be listed.
1164
1165ALLEXTERNALS = NO 254ALLEXTERNALS = NO
1166
1167# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
1168# in the modules index. If set to NO, only the current project's groups will
1169# be listed.
1170
1171EXTERNAL_GROUPS = YES 255EXTERNAL_GROUPS = YES
1172
1173# The PERL_PATH should be the absolute path and name of the perl script
1174# interpreter (i.e. the result of `which perl').
1175
1176PERL_PATH = /usr/bin/perl 256PERL_PATH = /usr/bin/perl
1177
1178#--------------------------------------------------------------------------- 257#---------------------------------------------------------------------------
1179# Configuration options related to the dot tool 258# Configuration options related to the dot tool
1180#--------------------------------------------------------------------------- 259#---------------------------------------------------------------------------
1181
1182# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
1183# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
1184# or super classes. Setting the tag to NO turns the diagrams off. Note that
1185# this option is superseded by the HAVE_DOT option below. This is only a
1186# fallback. It is recommended to install and use dot, since it yields more
1187# powerful graphs.
1188
1189CLASS_DIAGRAMS = YES 260CLASS_DIAGRAMS = YES
1190 261MSCGEN_PATH =
1191# You can define message sequence charts within doxygen comments using the \msc
1192# command. Doxygen will then run the mscgen tool (see
1193# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
1194# documentation. The MSCGEN_PATH tag allows you to specify the directory where
1195# the mscgen tool resides. If left empty the tool is assumed to be found in the
1196# default search path.
1197
1198MSCGEN_PATH =
1199
1200# If set to YES, the inheritance and collaboration graphs will hide
1201# inheritance and usage relations if the target is undocumented
1202# or is not a class.
1203
1204HIDE_UNDOC_RELATIONS = YES 262HIDE_UNDOC_RELATIONS = YES
1205
1206# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
1207# available from the path. This tool is part of Graphviz, a graph visualization
1208# toolkit from AT&T and Lucent Bell Labs. The other options in this section
1209# have no effect if this option is set to NO (the default)
1210
1211HAVE_DOT = NO 263HAVE_DOT = NO
1212 264DOT_NUM_THREADS = 0
1213# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen 265DOT_FONTNAME = Helvetica
1214# will generate a graph for each documented class showing the direct and 266DOT_FONTSIZE = 10
1215# indirect inheritance relations. Setting this tag to YES will force the 267DOT_FONTPATH =
1216# the CLASS_DIAGRAMS tag to NO.
1217
1218CLASS_GRAPH = YES 268CLASS_GRAPH = YES
1219
1220# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
1221# will generate a graph for each documented class showing the direct and
1222# indirect implementation dependencies (inheritance, containment, and
1223# class references variables) of the class with other documented classes.
1224
1225COLLABORATION_GRAPH = YES 269COLLABORATION_GRAPH = YES
1226
1227# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
1228# will generate a graph for groups, showing the direct groups dependencies
1229
1230GROUP_GRAPHS = YES 270GROUP_GRAPHS = YES
1231
1232# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
1233# collaboration diagrams in a style similar to the OMG's Unified Modeling
1234# Language.
1235
1236UML_LOOK = NO 271UML_LOOK = NO
1237 272UML_LIMIT_NUM_FIELDS = 10
1238# If set to YES, the inheritance and collaboration graphs will show the
1239# relations between templates and their instances.
1240
1241TEMPLATE_RELATIONS = NO 273TEMPLATE_RELATIONS = NO
1242
1243# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
1244# tags are set to YES then doxygen will generate a graph for each documented
1245# file showing the direct and indirect include dependencies of the file with
1246# other documented files.
1247
1248INCLUDE_GRAPH = YES 274INCLUDE_GRAPH = YES
1249
1250# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
1251# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
1252# documented header file showing the documented files that directly or
1253# indirectly include this file.
1254
1255INCLUDED_BY_GRAPH = YES 275INCLUDED_BY_GRAPH = YES
1256
1257# If the CALL_GRAPH and HAVE_DOT options are set to YES then
1258# doxygen will generate a call dependency graph for every global function
1259# or class method. Note that enabling this option will significantly increase
1260# the time of a run. So in most cases it will be better to enable call graphs
1261# for selected functions only using the \callgraph command.
1262
1263CALL_GRAPH = NO 276CALL_GRAPH = NO
1264
1265# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
1266# doxygen will generate a caller dependency graph for every global function
1267# or class method. Note that enabling this option will significantly increase
1268# the time of a run. So in most cases it will be better to enable caller
1269# graphs for selected functions only using the \callergraph command.
1270
1271CALLER_GRAPH = NO 277CALLER_GRAPH = NO
1272
1273# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
1274# will graphical hierarchy of all classes instead of a textual one.
1275
1276GRAPHICAL_HIERARCHY = YES 278GRAPHICAL_HIERARCHY = YES
1277
1278# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
1279# then doxygen will show the dependencies a directory has on other directories
1280# in a graphical way. The dependency relations are determined by the #include
1281# relations between the files in the directories.
1282
1283DIRECTORY_GRAPH = YES 279DIRECTORY_GRAPH = YES
1284
1285# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
1286# generated by dot. Possible values are png, jpg, or gif
1287# If left blank png will be used.
1288
1289DOT_IMAGE_FORMAT = png 280DOT_IMAGE_FORMAT = png
1290 281INTERACTIVE_SVG = NO
1291# The tag DOT_PATH can be used to specify the path where the dot tool can be 282DOT_PATH =
1292# found. If left blank, it is assumed the dot tool can be found in the path. 283DOTFILE_DIRS =
1293 284MSCFILE_DIRS =
1294DOT_PATH =
1295
1296# The DOTFILE_DIRS tag can be used to specify one or more directories that
1297# contain dot files that are included in the documentation (see the
1298# \dotfile command).
1299
1300DOTFILE_DIRS =
1301
1302# The MAX_DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
1303# nodes that will be shown in the graph. If the number of nodes in a graph
1304# becomes larger than this value, doxygen will truncate the graph, which is
1305# visualized by representing a node as a red box. Note that doxygen if the
1306# number of direct children of the root node in a graph is already larger than
1307# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
1308# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
1309
1310DOT_GRAPH_MAX_NODES = 50 285DOT_GRAPH_MAX_NODES = 50
1311
1312# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
1313# graphs generated by dot. A depth value of 3 means that only nodes reachable
1314# from the root by following a path via at most 3 edges will be shown. Nodes
1315# that lay further from the root node will be omitted. Note that setting this
1316# option to 1 or 2 may greatly reduce the computation time needed for large
1317# code bases. Also note that the size of a graph can be further restricted by
1318# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
1319
1320MAX_DOT_GRAPH_DEPTH = 0 286MAX_DOT_GRAPH_DEPTH = 0
1321
1322# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
1323# background. This is enabled by default, which results in a transparent
1324# background. Warning: Depending on the platform used, enabling this option
1325# may lead to badly anti-aliased labels on the edges of a graph (i.e. they
1326# become hard to read).
1327
1328DOT_TRANSPARENT = YES 287DOT_TRANSPARENT = YES
1329
1330# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
1331# files in one run (i.e. multiple -o and -T options on the command line). This
1332# makes dot run faster, but since only newer versions of dot (>1.8.10)
1333# support this, this feature is disabled by default.
1334
1335DOT_MULTI_TARGETS = NO 288DOT_MULTI_TARGETS = NO
1336
1337# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
1338# generate a legend page explaining the meaning of the various boxes and
1339# arrows in the dot generated graphs.
1340
1341GENERATE_LEGEND = YES 289GENERATE_LEGEND = YES
1342
1343# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
1344# remove the intermediate dot files that are used to generate
1345# the various graphs.
1346
1347DOT_CLEANUP = YES 290DOT_CLEANUP = YES
1348
1349#---------------------------------------------------------------------------
1350# Configuration::additions related to the search engine
1351#---------------------------------------------------------------------------
1352
1353# The SEARCHENGINE tag specifies whether or not a search engine should be
1354# used. If set to NO the values of all tags below this one will be ignored.
1355
1356SEARCHENGINE = YES