Merge branch 'master' of ssh://opensimulator.org/var/git/opensim

5 files changed, 92 insertions, 46 deletions

diff --git a/bin/OpenSim.ini.example b/bin/OpenSim.ini.example
index c05c3de..fbaa590 100644
--- a/bin/OpenSim.ini.example
+++ b/bin/OpenSim.ini.example
@@ -621,10 +621,11 @@
 
     ;; You need to load a local service for a standalone, and a remote service
     ;; for a grid region. Use one of the lines below, as appropriate
+    ;; If you're using Freeswitch on a standalone then you will also need to configure the [FreeswitchService] section
     ; LocalServiceModule = OpenSim.Services.FreeswitchService.dll:FreeswitchService
     ; LocalServiceModule = OpenSim.Services.Connectors.dll:RemoteFreeswitchConnector
 
-    ;; If using a remote module, specify the server URL
+    ;; If using a remote connector, specify the server URL
     ; FreeswitchServiceURL = http://my.grid.server:8003/fsapi
 
 
@@ -632,20 +633,37 @@
     ;; !!!!!!!!!!!!!!!!!!!!!!!!!!!
     ;; !!!!!!STANDALONE ONLY!!!!!!
     ;; !!!!!!!!!!!!!!!!!!!!!!!!!!!
-    ;; IP of your FS server
-    ;ServerAddress = 85.25.142.92
+    ;; The IP address of your FreeSWITCH server.  The common case is for this to be the same as the server running the OpenSim standalone
+    ;; This has to be set for the FreeSWITCH service to work
+    ;ServerAddress = 127.0.0.1
 
-    ;; All other options are - well - optional
-    ; Realm = "127.0.0.1"
-    ; SIPProxy = "127.0.0.1:5060"
-    ; EchoServer = "127.0.0.1"
-    ; EchoPort = 50505
-    ; AttemptSTUN = "false"
+    ;; The following configuration parameters are optional
+
+    ;; By default, this is the same as the ServerAddress
+    ; Realm = 127.0.0.1
+
+    ;; By default, this is the same as the ServerAddress on port 5060
+    ; SIPProxy = 127.0.0.1:5060
+
+    ;; Default is 5000ms
     ; DefaultTimeout = 5000
-    ; Context = "default"
-    ; UserName = "freeswitch"
-    ; Password = "password"
 
+    ;; The dial plan context.  Default is "default"
+    ; Context = default
+
+    ;; Currently unused
+    ; UserName = freeswitch
+
+    ;; Currently unused
+    ; Password = password
+
+    ;; The following parameters are for STUN = Simple Traversal of UDP through NATs
+    ;; See http://wiki.freeswitch.org/wiki/NAT_Traversal
+    ;; stun.freeswitch.org is not guaranteed to be running so use it in
+    ;; production at your own risk    
+    ; EchoServer = 127.0.0.1
+    ; EchoPort = 50505
+    ; AttemptSTUN = false
 
 [Groups]
     ;# {Enabled} {} {Enable groups?} {true false} false
diff --git a/bin/OpenSimDefaults.ini b/bin/OpenSimDefaults.ini
index b134b7e..2521c6c 100644
--- a/bin/OpenSimDefaults.ini
+++ b/bin/OpenSimDefaults.ini
@@ -453,7 +453,7 @@
 [Mesh]
     ; enable / disable Collada mesh support
     ; default is true
-    ; ColladaMesh = true
+    ColladaMesh = true
 
     ; if you use Meshmerizer and want collisions for meshies, setting this to true
     ; will cause OpenSim to attempt to decode meshies assets, extract the physics
diff --git a/bin/Robust.HG.ini.example b/bin/Robust.HG.ini.example
index f12a143..e2e9624 100644
--- a/bin/Robust.HG.ini.example
+++ b/bin/Robust.HG.ini.example
@@ -85,19 +85,37 @@ ServiceConnectors = "8003/OpenSim.Server.Handlers.dll:AssetServiceConnector,8003
 ; * This is the configuration for the freeswitch server in grid mode
 [FreeswitchService]
     LocalServiceModule = "OpenSim.Services.FreeswitchService.dll:FreeswitchService"
-    ;; IP of your FS server
+
+    ;; The IP address of your FreeSWITCH server.
     ; ServerAddress = 127.0.0.1
 
-    ;; All other options are - well - optional
-    ; Realm = "127.0.0.1"
-    ; SIPProxy = "127.0.0.1:5060"
-    ; EchoServer = "127.0.0.1"
-    ; EchoPort = 50505
-    ; AttemptSTUN = "false"
+    ;; The following configuration parameters are optional
+
+    ;; By default, this is the same as the ServerAddress
+    ; Realm = 127.0.0.1
+
+    ;; By default, this is the same as the ServerAddress on port 5060
+    ; SIPProxy = 127.0.0.1:5060
+
+    ;; Default is 5000ms
     ; DefaultTimeout = 5000
-    ; Context = "default"
-    ; UserName = "freeswitch"
-    ; Password = "password"
+
+    ;; The dial plan context.  Default is "default"
+    ; Context = default
+
+    ;; Currently unused
+    ; UserName = freeswitch
+
+    ;; Currently unused
+    ; Password = password
+
+    ;; The following parameters are for STUN = Simple Traversal of UDP through NATs
+    ;; See http://wiki.freeswitch.org/wiki/NAT_Traversal
+    ;; stun.freeswitch.org is not guaranteed to be running so use it in
+    ;; production at your own risk    
+    ; EchoServer = 127.0.0.1
+    ; EchoPort = 50505
+    ; AttemptSTUN = false
 
 ; * This is the new style authentication service. Currently, only MySQL
 ; * is implemented. 
diff --git a/bin/Robust.ini.example b/bin/Robust.ini.example
index 7c13076..4d16236 100644
--- a/bin/Robust.ini.example
+++ b/bin/Robust.ini.example
@@ -69,19 +69,37 @@ ServiceConnectors = "8003/OpenSim.Server.Handlers.dll:AssetServiceConnector,8003
 ; * This is the configuration for the freeswitch server in grid mode
 [FreeswitchService]
     LocalServiceModule = "OpenSim.Services.FreeswitchService.dll:FreeswitchService"
-    ;; IP of your FS server
+
+    ;; The IP address of your FreeSWITCH server.
     ; ServerAddress = 127.0.0.1
 
-    ;; All other options are - well - optional
-    ; Realm = "127.0.0.1"
-    ; SIPProxy = "127.0.0.1:5060"
-    ; EchoServer = "127.0.0.1"
-    ; EchoPort = 50505
-    ; AttemptSTUN = "false"
+    ;; The following configuration parameters are optional
+
+    ;; By default, this is the same as the ServerAddress
+    ; Realm = 127.0.0.1
+
+    ;; By default, this is the same as the ServerAddress on port 5060
+    ; SIPProxy = 127.0.0.1:5060
+
+    ;; Default is 5000ms
     ; DefaultTimeout = 5000
-    ; Context = "default"
-    ; UserName = "freeswitch"
-    ; Password = "password"
+
+    ;; The dial plan context.  Default is "default"
+    ; Context = default
+
+    ;; Currently unused
+    ; UserName = freeswitch
+
+    ;; Currently unused
+    ; Password = password
+
+    ;; The following parameters are for STUN = Simple Traversal of UDP through NATs
+    ;; See http://wiki.freeswitch.org/wiki/NAT_Traversal
+    ;; stun.freeswitch.org is not guaranteed to be running so use it in
+    ;; production at your own risk    
+    ; EchoServer = 127.0.0.1
+    ; EchoPort = 50505
+    ; AttemptSTUN = false
 
 ; * This is the new style authentication service. Currently, only MySQL
 ; * is implemented. 
diff --git a/bin/config-include/StandaloneCommon.ini.example b/bin/config-include/StandaloneCommon.ini.example
index d6f15bb..dcebd63 100644
--- a/bin/config-include/StandaloneCommon.ini.example
+++ b/bin/config-include/StandaloneCommon.ini.example
@@ -28,10 +28,10 @@
 
 [HGInventoryAccessModule]
     ProfileServerURI = "http://127.0.0.1:9000/profiles"
-        ;; If you want to protect your assets from being copied by foreign visitors
-        ;; uncomment the next line. You may want to do this on sims that have licensed content.
-        ; OutboundPermission = False
 
+    ;; If you want to protect your assets from being copied by foreign visitors
+    ;; uncomment the next line. You may want to do this on sims that have licensed content.
+    ; OutboundPermission = False
 
 [Modules]
     ;; Choose 0 or 1 cache modules, and the corresponding config file, if it exists.
@@ -45,16 +45,9 @@
     AssetCaching = "CenomeMemoryAssetCache"
     Include-CenomeCache = "config-include/CenomeCache.ini"
 
-    ;; Enable this to use Freeswitch on a standalone
-    ;FreeswitchServiceInConnector = True
-
     ;; Authorization is not on by default, as it depends on external php
     ;AuthorizationServices = "LocalAuthorizationServicesConnector"
 
-[FreeswitchService]
-    ;; Configuration for the freeswitch service goes here
-    LocalServiceModule = "OpenSim.Services.FreeswitchService.dll:FreeswitchService"
-
 [GridService]
     ;; For in-memory region storage (default)
     StorageProvider = "OpenSim.Data.Null.dll:NullRegionData"
@@ -74,9 +67,8 @@
     Region_Welcome_Area = "DefaultRegion, FallbackRegion"
 
     ; === HG ONLY ===
-        ;; change this to the address of your simulator
-        Gatekeeper="http://127.0.0.1:9000"
-
+    ;; change this to the address of your simulator
+    Gatekeeper="http://127.0.0.1:9000"
 
 [LibraryModule]
     ; Set this if you want to change the name of the OpenSim Library