Initial update to OpenSim 0.8.2.1 source code.

1 files changed, 608 insertions, 0 deletions

diff --git a/OpenSim/Region/OptionalModules/Materials/MaterialsModule.cs b/OpenSim/Region/OptionalModules/Materials/MaterialsModule.cs
new file mode 100644
index 0000000..e95889d
--- /dev/null
+++ b/OpenSim/Region/OptionalModules/Materials/MaterialsModule.cs
@@ -0,0 +1,608 @@
+/*
+ * Copyright (c) Contributors, http://opensimulator.org/
+ * See CONTRIBUTORS.TXT for a full list of copyright holders.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of the OpenSimulator Project nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE DEVELOPERS ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE CONTRIBUTORS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+using System;
+using System.Collections.Generic;
+using System.IO;
+using System.Reflection;
+using System.Security.Cryptography; // for computing md5 hash
+using log4net;
+using Mono.Addins;
+using Nini.Config;
+
+using OpenMetaverse;
+using OpenMetaverse.StructuredData;
+
+using OpenSim.Framework;
+using OpenSim.Framework.Servers;
+using OpenSim.Framework.Servers.HttpServer;
+using OpenSim.Region.Framework.Interfaces;
+using OpenSim.Region.Framework.Scenes;
+using OpenSimAssetType = OpenSim.Framework.SLUtil.OpenSimAssetType;
+
+using Ionic.Zlib;
+
+// You will need to uncomment these lines if you are adding a region module to some other assembly which does not already
+// specify its assembly.  Otherwise, the region modules in the assembly will not be picked up when OpenSimulator scans
+// the available DLLs
+//[assembly: Addin("MaterialsModule", "1.0")]
+//[assembly: AddinDependency("OpenSim", "0.8.1")]
+
+namespace OpenSim.Region.OptionalModules.Materials
+{
+    [Extension(Path = "/OpenSim/RegionModules", NodeName = "RegionModule", Id = "MaterialsModule")]
+    public class MaterialsModule : INonSharedRegionModule
+    {
+        private static readonly ILog m_log = LogManager.GetLogger(MethodBase.GetCurrentMethod().DeclaringType);
+
+        public string Name { get { return "MaterialsModule"; } }        
+        
+        public Type ReplaceableInterface { get { return null; } }
+
+        private Scene m_scene = null;
+        private bool m_enabled = false;
+        private int m_maxMaterialsPerTransaction = 50;
+
+        public Dictionary<UUID, OSDMap> m_regionMaterials = new Dictionary<UUID, OSDMap>();
+
+        public void Initialise(IConfigSource source)
+        {
+            m_enabled = true; // default is enabled
+
+            IConfig config = source.Configs["Materials"];
+            if (config != null)
+            {
+                m_enabled = config.GetBoolean("enable_materials", m_enabled);
+                m_maxMaterialsPerTransaction = config.GetInt("MaxMaterialsPerTransaction", m_maxMaterialsPerTransaction);
+            }
+
+            if (m_enabled)
+                m_log.DebugFormat("[Materials]: Initialized");
+        }
+        
+        public void Close()
+        {
+            if (!m_enabled)
+                return;
+        }
+        
+        public void AddRegion(Scene scene)
+        {
+            if (!m_enabled)
+                return;
+
+            m_scene = scene;
+            m_scene.EventManager.OnRegisterCaps += OnRegisterCaps;
+            m_scene.EventManager.OnObjectAddedToScene += EventManager_OnObjectAddedToScene;
+        }
+
+        private void EventManager_OnObjectAddedToScene(SceneObjectGroup obj)
+        {
+            foreach (var part in obj.Parts)
+                if (part != null)
+                    GetStoredMaterialsInPart(part);
+        }
+
+        private void OnRegisterCaps(OpenMetaverse.UUID agentID, OpenSim.Framework.Capabilities.Caps caps)
+        {
+            string capsBase = "/CAPS/" + caps.CapsObjectPath;
+
+            IRequestHandler renderMaterialsPostHandler 
+                = new RestStreamHandler("POST", capsBase + "/",
+                    (request, path, param, httpRequest, httpResponse)
+                        => RenderMaterialsPostCap(request, agentID),
+                    "RenderMaterials", null);
+            caps.RegisterHandler("RenderMaterials", renderMaterialsPostHandler);
+
+            // OpenSimulator CAPs infrastructure seems to be somewhat hostile towards any CAP that requires both GET
+            // and POST handlers, (at least at the time this was originally written), so we first set up a POST
+            // handler normally and then add a GET handler via MainServer
+
+            IRequestHandler renderMaterialsGetHandler 
+                = new RestStreamHandler("GET", capsBase + "/",
+                    (request, path, param, httpRequest, httpResponse)
+                        => RenderMaterialsGetCap(request),
+                    "RenderMaterials", null);
+            MainServer.Instance.AddStreamHandler(renderMaterialsGetHandler);
+
+            // materials viewer seems to use either POST or PUT, so assign POST handler for PUT as well
+            IRequestHandler renderMaterialsPutHandler 
+                = new RestStreamHandler("PUT", capsBase + "/",
+                    (request, path, param, httpRequest, httpResponse)
+                        => RenderMaterialsPostCap(request, agentID),
+                    "RenderMaterials", null);
+            MainServer.Instance.AddStreamHandler(renderMaterialsPutHandler);
+        }
+        
+        public void RemoveRegion(Scene scene)
+        {
+            if (!m_enabled)
+                return;
+
+            m_scene.EventManager.OnRegisterCaps -= OnRegisterCaps;
+            m_scene.EventManager.OnObjectAddedToScene -= EventManager_OnObjectAddedToScene;
+        }        
+        
+        public void RegionLoaded(Scene scene)
+        {
+            if (!m_enabled) return;
+
+            ISimulatorFeaturesModule featuresModule = scene.RequestModuleInterface<ISimulatorFeaturesModule>();
+            if (featuresModule != null)
+                featuresModule.OnSimulatorFeaturesRequest += OnSimulatorFeaturesRequest;
+        }
+
+        private void OnSimulatorFeaturesRequest(UUID agentID, ref OSDMap features)
+        {
+            features["MaxMaterialsPerTransaction"] = m_maxMaterialsPerTransaction;
+        }
+
+        /// <summary>
+        /// Finds any legacy materials stored in DynAttrs that may exist for this part and add them to 'm_regionMaterials'.
+        /// </summary>
+        /// <param name="part"></param>
+        private void GetLegacyStoredMaterialsInPart(SceneObjectPart part)
+        {
+            if (part.DynAttrs == null)
+                return;
+
+            OSD OSMaterials = null;
+            OSDArray matsArr = null;
+
+            lock (part.DynAttrs)
+            {
+                if (part.DynAttrs.ContainsStore("OpenSim", "Materials"))
+                {
+                    OSDMap materialsStore = part.DynAttrs.GetStore("OpenSim", "Materials");
+
+                    if (materialsStore == null)
+                        return;
+
+                    materialsStore.TryGetValue("Materials", out OSMaterials);
+                }
+
+                if (OSMaterials != null && OSMaterials is OSDArray)
+                    matsArr = OSMaterials as OSDArray;
+                else
+                    return;
+            }
+
+            if (matsArr == null)
+                return;
+
+            foreach (OSD elemOsd in matsArr)
+            {
+                if (elemOsd != null && elemOsd is OSDMap)
+                {
+                    OSDMap matMap = elemOsd as OSDMap;
+                    if (matMap.ContainsKey("ID") && matMap.ContainsKey("Material"))
+                    {
+                        try
+                        {
+                            lock (m_regionMaterials)
+                                m_regionMaterials[matMap["ID"].AsUUID()] = (OSDMap)matMap["Material"];
+                        }
+                        catch (Exception e)
+                        {
+                            m_log.Warn("[Materials]: exception decoding persisted legacy material: " + e.ToString());
+                        }
+                    }
+                }
+            }
+        }
+
+        /// <summary>
+        /// Find the materials used in the SOP, and add them to 'm_regionMaterials'.
+        /// </summary>
+        private void GetStoredMaterialsInPart(SceneObjectPart part)
+        { 
+            if (part.Shape == null)
+                return;
+
+            var te = new Primitive.TextureEntry(part.Shape.TextureEntry, 0, part.Shape.TextureEntry.Length);
+            if (te == null)
+                return;
+
+            GetLegacyStoredMaterialsInPart(part);
+
+            if (te.DefaultTexture != null)
+                GetStoredMaterialInFace(part, te.DefaultTexture);
+            else
+                m_log.WarnFormat(
+                    "[Materials]: Default texture for part {0} (part of object {1}) in {2} unexpectedly null.  Ignoring.", 
+                    part.Name, part.ParentGroup.Name, m_scene.Name);
+
+            foreach (Primitive.TextureEntryFace face in te.FaceTextures)
+            {
+                if (face != null)
+                    GetStoredMaterialInFace(part, face);
+            }
+        }
+
+        /// <summary>
+        /// Find the materials used in one Face, and add them to 'm_regionMaterials'.
+        /// </summary>
+        private void GetStoredMaterialInFace(SceneObjectPart part, Primitive.TextureEntryFace face)
+        {
+            UUID id = face.MaterialID;
+            if (id == UUID.Zero)
+                return;
+
+            lock (m_regionMaterials)
+            {
+                if (m_regionMaterials.ContainsKey(id))
+                    return;
+                
+                byte[] data = m_scene.AssetService.GetData(id.ToString());
+                if (data == null)
+                {
+                    m_log.WarnFormat("[Materials]: Prim \"{0}\" ({1}) contains unknown material ID {2}", part.Name, part.UUID, id);
+                    return;
+                }
+
+                OSDMap mat;
+                try
+                {
+                    mat = (OSDMap)OSDParser.DeserializeLLSDXml(data);
+                }
+                catch (Exception e)
+                {
+                    m_log.WarnFormat("[Materials]: cannot decode material asset {0}: {1}", id, e.Message);
+                    return;
+                }
+
+                m_regionMaterials[id] = mat;
+            }
+        }
+
+        public string RenderMaterialsPostCap(string request, UUID agentID)
+        {
+            OSDMap req = (OSDMap)OSDParser.DeserializeLLSDXml(request);
+            OSDMap resp = new OSDMap();
+
+            OSDMap materialsFromViewer = null;
+
+            OSDArray respArr = new OSDArray();
+
+            if (req.ContainsKey("Zipped"))
+            {
+                OSD osd = null;
+
+                byte[] inBytes = req["Zipped"].AsBinary();
+
+                try 
+                {
+                    osd = ZDecompressBytesToOsd(inBytes);
+
+                    if (osd != null)
+                    {
+                        if (osd is OSDArray) // assume array of MaterialIDs designating requested material entries
+                        {
+                            foreach (OSD elem in (OSDArray)osd)
+                            {
+                                try
+                                {
+                                    UUID id = new UUID(elem.AsBinary(), 0);
+
+                                    lock (m_regionMaterials)
+                                    {
+                                        if (m_regionMaterials.ContainsKey(id))
+                                        {
+                                            OSDMap matMap = new OSDMap();
+                                            matMap["ID"] = OSD.FromBinary(id.GetBytes());
+                                            matMap["Material"] = m_regionMaterials[id];
+                                            respArr.Add(matMap);
+                                        }
+                                        else
+                                        {
+                                            m_log.Warn("[Materials]: request for unknown material ID: " + id.ToString());
+
+                                            // Theoretically we could try to load the material from the assets service,
+                                            // but that shouldn't be necessary because the viewer should only request
+                                            // materials that exist in a prim on the region, and all of these materials
+                                            // are already stored in m_regionMaterials.
+                                        }
+                                    }
+                                }
+                                catch (Exception e)
+                                {
+                                    m_log.Error("Error getting materials in response to viewer request", e);
+                                    continue;
+                                }
+                            }
+                        }
+                        else if (osd is OSDMap) // request to assign a material
+                        {
+                            materialsFromViewer = osd as OSDMap;
+
+                            if (materialsFromViewer.ContainsKey("FullMaterialsPerFace"))
+                            {
+                                OSD matsOsd = materialsFromViewer["FullMaterialsPerFace"];
+                                if (matsOsd is OSDArray)
+                                {
+                                    OSDArray matsArr = matsOsd as OSDArray;
+
+                                    try
+                                    {
+                                        foreach (OSDMap matsMap in matsArr)
+                                        {
+                                            uint primLocalID = 0;
+                                            try {
+                                                primLocalID = matsMap["ID"].AsUInteger();
+                                            }
+                                            catch (Exception e) {
+                                                m_log.Warn("[Materials]: cannot decode \"ID\" from matsMap: " + e.Message);
+                                                continue;
+                                            }
+
+                                            OSDMap mat = null;
+                                            try
+                                            {
+                                                mat = matsMap["Material"] as OSDMap;
+                                            }
+                                            catch (Exception e)
+                                            {
+                                                m_log.Warn("[Materials]: cannot decode \"Material\" from matsMap: " + e.Message);
+                                                continue;
+                                            }
+
+                                            SceneObjectPart sop = m_scene.GetSceneObjectPart(primLocalID);
+                                            if (sop == null)
+                                            {
+                                                m_log.WarnFormat("[Materials]: SOP not found for localId: {0}", primLocalID.ToString());
+                                                continue;
+                                            }
+
+                                            if (!m_scene.Permissions.CanEditObject(sop.UUID, agentID))
+                                            {
+                                                m_log.WarnFormat("User {0} can't edit object {1} {2}", agentID, sop.Name, sop.UUID);
+                                                continue;
+                                            }
+
+                                            Primitive.TextureEntry te = new Primitive.TextureEntry(sop.Shape.TextureEntry, 0, sop.Shape.TextureEntry.Length);
+                                            if (te == null)
+                                            {
+                                                m_log.WarnFormat("[Materials]: Error in TextureEntry for SOP {0} {1}", sop.Name, sop.UUID);
+                                                continue;
+                                            }
+
+
+                                            UUID id;
+                                            if (mat == null)
+                                            {
+                                                // This happens then the user removes a material from a prim
+                                                id = UUID.Zero;
+                                            }
+                                            else
+                                            {
+                                                id = StoreMaterialAsAsset(agentID, mat, sop);
+                                            }
+
+
+                                            int face = -1;
+
+                                            if (matsMap.ContainsKey("Face"))
+                                            {
+                                                face = matsMap["Face"].AsInteger();
+                                                Primitive.TextureEntryFace faceEntry = te.CreateFace((uint)face);
+                                                faceEntry.MaterialID = id;
+                                            }
+                                            else
+                                            {
+                                                if (te.DefaultTexture == null)
+                                                    m_log.WarnFormat("[Materials]: TextureEntry.DefaultTexture is null in {0} {1}", sop.Name, sop.UUID);
+                                                else
+                                                    te.DefaultTexture.MaterialID = id;
+                                            }
+
+                                            //m_log.DebugFormat("[Materials]: in \"{0}\" {1}, setting material ID for face {2} to {3}", sop.Name, sop.UUID, face, id);
+
+                                            // We can't use sop.UpdateTextureEntry(te) because it filters, so do it manually
+                                            sop.Shape.TextureEntry = te.GetBytes();
+
+                                            if (sop.ParentGroup != null)
+                                            {
+                                                sop.TriggerScriptChangedEvent(Changed.TEXTURE);
+                                                sop.UpdateFlag = UpdateRequired.FULL;
+                                                sop.ParentGroup.HasGroupChanged = true;
+                                                sop.ScheduleFullUpdate();
+                                            }
+                                        }
+                                    }
+                                    catch (Exception e)
+                                    {
+                                        m_log.Warn("[Materials]: exception processing received material ", e);
+                                    }
+                                }
+                            }
+                        }
+                    }
+
+                }
+                catch (Exception e)
+                {
+                    m_log.Warn("[Materials]: exception decoding zipped CAP payload ", e);
+                    //return "";
+                }
+            }
+
+            
+            resp["Zipped"] = ZCompressOSD(respArr, false);
+            string response = OSDParser.SerializeLLSDXmlString(resp);
+
+            //m_log.Debug("[Materials]: cap request: " + request);
+            //m_log.Debug("[Materials]: cap request (zipped portion): " + ZippedOsdBytesToString(req["Zipped"].AsBinary()));
+            //m_log.Debug("[Materials]: cap response: " + response);
+            return response;
+        }
+
+        private UUID StoreMaterialAsAsset(UUID agentID, OSDMap mat, SceneObjectPart sop)
+        {
+            UUID id;
+            // Material UUID = hash of the material's data.
+            // This makes materials deduplicate across the entire grid (but isn't otherwise required).
+            byte[] data = System.Text.Encoding.ASCII.GetBytes(OSDParser.SerializeLLSDXmlString(mat));
+            using (var md5 = MD5.Create())
+                id = new UUID(md5.ComputeHash(data), 0);
+
+            lock (m_regionMaterials)
+            {
+                if (!m_regionMaterials.ContainsKey(id))
+                {
+                    m_regionMaterials[id] = mat;
+
+                    // This asset might exist already, but it's ok to try to store it again
+                    string name = "Material " + ChooseMaterialName(mat, sop);
+                    name = name.Substring(0, Math.Min(64, name.Length)).Trim();
+                    AssetBase asset = new AssetBase(id, name, (sbyte)OpenSimAssetType.Material, agentID.ToString());
+                    asset.Data = data;
+                    m_scene.AssetService.Store(asset);
+                }
+            }
+            return id;
+        }
+
+        /// <summary>
+        /// Use heuristics to choose a good name for the material.
+        /// </summary>
+        private string ChooseMaterialName(OSDMap mat, SceneObjectPart sop)
+        {
+            UUID normMap = mat["NormMap"].AsUUID();
+            if (normMap != UUID.Zero)
+            {
+                AssetBase asset = m_scene.AssetService.GetCached(normMap.ToString());
+                if ((asset != null) && (asset.Name.Length > 0) && !asset.Name.Equals("From IAR"))
+                    return asset.Name;
+            }
+
+            UUID specMap = mat["SpecMap"].AsUUID();
+            if (specMap != UUID.Zero)
+            {
+                AssetBase asset = m_scene.AssetService.GetCached(specMap.ToString());
+                if ((asset != null) && (asset.Name.Length > 0) && !asset.Name.Equals("From IAR"))
+                    return asset.Name;
+            }
+
+            if (sop.Name != "Primitive")
+                return sop.Name;
+            
+            if ((sop.ParentGroup != null) && (sop.ParentGroup.Name != "Primitive"))
+                return sop.ParentGroup.Name;
+
+            return "";
+        }
+
+
+        public string RenderMaterialsGetCap(string request)
+        {
+            OSDMap resp = new OSDMap();
+            int matsCount = 0;
+            OSDArray allOsd = new OSDArray();
+
+            lock (m_regionMaterials)
+            {
+                foreach (KeyValuePair<UUID, OSDMap> kvp in m_regionMaterials)
+                {
+                    OSDMap matMap = new OSDMap();
+
+                    matMap["ID"] = OSD.FromBinary(kvp.Key.GetBytes());
+                    matMap["Material"] = kvp.Value;
+                    allOsd.Add(matMap);
+                    matsCount++;
+                }
+            }
+
+            resp["Zipped"] = ZCompressOSD(allOsd, false);
+
+            return OSDParser.SerializeLLSDXmlString(resp);
+        }
+
+        private static string ZippedOsdBytesToString(byte[] bytes)
+        {
+            try
+            {
+                return OSDParser.SerializeJsonString(ZDecompressBytesToOsd(bytes));
+            }
+            catch (Exception e)
+            {
+                return "ZippedOsdBytesToString caught an exception: " + e.ToString();
+            }
+        }
+
+        /// <summary>
+        /// computes a UUID by hashing a OSD object
+        /// </summary>
+        /// <param name="osd"></param>
+        /// <returns></returns>
+        private static UUID HashOsd(OSD osd)
+        {
+            byte[] data = OSDParser.SerializeLLSDBinary(osd, false);
+            using (var md5 = MD5.Create())
+                return new UUID(md5.ComputeHash(data), 0);
+        }
+
+        public static OSD ZCompressOSD(OSD inOsd, bool useHeader)
+        {
+            OSD osd = null;
+
+            byte[] data = OSDParser.SerializeLLSDBinary(inOsd, useHeader);
+
+            using (MemoryStream msSinkCompressed = new MemoryStream())
+            {
+                using (Ionic.Zlib.ZlibStream zOut = new Ionic.Zlib.ZlibStream(msSinkCompressed, 
+                    Ionic.Zlib.CompressionMode.Compress, CompressionLevel.BestCompression, true))
+                {
+                    zOut.Write(data, 0, data.Length);
+                }
+
+                msSinkCompressed.Seek(0L, SeekOrigin.Begin);
+                osd = OSD.FromBinary(msSinkCompressed.ToArray());
+            }
+
+            return osd;
+        }
+
+
+        public static OSD ZDecompressBytesToOsd(byte[] input)
+        {
+            OSD osd = null;
+
+            using (MemoryStream msSinkUnCompressed = new MemoryStream())
+            {
+                using (Ionic.Zlib.ZlibStream zOut = new Ionic.Zlib.ZlibStream(msSinkUnCompressed, CompressionMode.Decompress, true))
+                {
+                    zOut.Write(input, 0, input.Length);
+                }
+
+                msSinkUnCompressed.Seek(0L, SeekOrigin.Begin);
+                osd = OSDParser.DeserializeLLSDBinary(msSinkUnCompressed.ToArray());
+            }
+
+            return osd;
+        }
+    }
+}