/** 
 * @file llvolume.cpp
 *
 * Copyright (c) 2002-2007, Linden Research, Inc.
 * 
 * Second Life Viewer Source Code
 * The source code in this file ("Source Code") is provided by Linden Lab
 * to you under the terms of the GNU General Public License, version 2.0
 * ("GPL"), unless you have obtained a separate licensing agreement
 * ("Other License"), formally executed by you and Linden Lab.  Terms of
 * the GPL can be found in doc/GPL-license.txt in this distribution, or
 * online at http://secondlife.com/developers/opensource/gplv2
 * 
 * There are special exceptions to the terms and conditions of the GPL as
 * it is applied to this Source Code. View the full text of the exception
 * in the file doc/FLOSS-exception.txt in this software distribution, or
 * online at http://secondlife.com/developers/opensource/flossexception
 * 
 * By copying, modifying or distributing this software, you acknowledge
 * that you have read and understood your obligations described above,
 * and agree to abide by those obligations.
 * 
 * ALL LINDEN LAB SOURCE CODE IS PROVIDED "AS IS." LINDEN LAB MAKES NO
 * WARRANTIES, EXPRESS, IMPLIED OR OTHERWISE, REGARDING ITS ACCURACY,
 * COMPLETENESS OR PERFORMANCE.
 */

#include "linden_common.h"
#include "llmath.h"

#include <set>

#include "llerror.h"

#include "llvolumemgr.h"
#include "v2math.h"
#include "v3math.h"
#include "v4math.h"
#include "m4math.h"
#include "m3math.h"
#include "lldarray.h"
#include "llvolume.h"
#include "llstl.h"

#define DEBUG_SILHOUETTE_BINORMALS 0
#define DEBUG_SILHOUETTE_NORMALS 0 // TomY: Use this to display normals using the silhouette
#define DEBUG_SILHOUETTE_EDGE_MAP 0 // DaveP: Use this to display edge map using the silhouette

const F32 CUT_MIN = 0.f;
const F32 CUT_MAX = 1.f;
const F32 MIN_CUT_DELTA = 0.02f;

const F32 HOLLOW_MIN = 0.f;
const F32 HOLLOW_MAX = 0.95f;
const F32 HOLLOW_MAX_SQUARE	= 0.7f;

const F32 TWIST_MIN = -1.f;
const F32 TWIST_MAX =  1.f;

const F32 RATIO_MIN = 0.f;
const F32 RATIO_MAX = 2.f; // Tom Y: Inverted sense here: 0 = top taper, 2 = bottom taper

const F32 HOLE_X_MIN= 0.05f;
const F32 HOLE_X_MAX= 1.0f;

const F32 HOLE_Y_MIN= 0.05f;
const F32 HOLE_Y_MAX= 0.5f;

const F32 SHEAR_MIN = -0.5f;
const F32 SHEAR_MAX =  0.5f;

const F32 REV_MIN = 1.f;
const F32 REV_MAX = 4.f;

const F32 TAPER_MIN = -1.f;
const F32 TAPER_MAX =  1.f;

const F32 SKEW_MIN	= -0.95f;
const F32 SKEW_MAX	=  0.95f;

BOOL check_same_clock_dir( const LLVector3& pt1, const LLVector3& pt2, const LLVector3& pt3, const LLVector3& norm)
{    
	LLVector3 test = (pt2-pt1)%(pt3-pt2);

	//answer
	if(test * norm < 0) 
	{
		return FALSE;
	}
	else 
	{
		return TRUE;
	}
} 

// intersect test between triangle pt1,pt2,pt3 and line from linept to linept+vect
//returns TRUE if intersecting and moves linept to the point of intersection
BOOL LLTriangleLineSegmentIntersect( const LLVector3& pt1, const LLVector3& pt2, const LLVector3& pt3, LLVector3& linept, const LLVector3& vect)
{
	LLVector3 V1 = pt2-pt1;
	LLVector3 V2 = pt3-pt2;
	
	LLVector3 norm = V1 % V2;
	
	F32 dotprod = norm * vect;

	if(dotprod < 0)
	{
		//Find point of intersect to triangle plane.
		//find t to intersect point
		F32 t = -(norm * (linept-pt1))/dotprod;

		// if ds is neg line started past triangle so can't hit triangle.
		if (t > 0) 
		{
			return FALSE;
		}
	
		LLVector3 pt_int = linept + (vect*t);
		
		if(check_same_clock_dir(pt1, pt2, pt_int, norm))
		{
			if(check_same_clock_dir(pt2, pt3, pt_int, norm))
			{
				if(check_same_clock_dir(pt3, pt1, pt_int, norm))
				{
					// answer in pt_int is insde triangle
					linept.setVec(pt_int);
					return TRUE;
				}
			}
		}
	}
	
	return FALSE;
} 


//-------------------------------------------------------------------
// statics
//-------------------------------------------------------------------


//----------------------------------------------------

LLProfile::Face* LLProfile::addCap(S16 faceID)
{
	Face *face   = vector_append(mFaces, 1);
	
	face->mIndex = 0;
	face->mCount = mTotal;
	face->mScaleU= 1.0f;
	face->mCap   = TRUE;
	face->mFaceID = faceID;
	return face;
}

LLProfile::Face* LLProfile::addFace(S32 i, S32 count, F32 scaleU, S16 faceID, BOOL flat)
{
	Face *face   = vector_append(mFaces, 1);
	
	face->mIndex = i;
	face->mCount = count;
	face->mScaleU= scaleU;

	face->mFlat = flat;
	face->mCap   = FALSE;
	face->mFaceID = faceID;
	return face;
}

// What is the bevel parameter used for? - DJS 04/05/02
// Bevel parameter is currently unused but presumedly would support
// filleted and chamfered corners
void LLProfile::genNGon(S32 sides, F32 offset, F32 bevel, F32 ang_scale, S32 split)
{
	// Generate an n-sided "circular" path.
	// 0 is (1,0), and we go counter-clockwise along a circular path from there.
	const F32 tableScale[] = { 1, 1, 1, 0.5f, 0.707107f, 0.53f, 0.525f, 0.5f };
	F32 scale = 0.5f;
	F32 t, t_step, t_first, t_fraction, ang, ang_step;
	LLVector3 pt1,pt2;

	mMaxX = 0.f;
	mMinX = 0.f;

	F32 begin  = mParams.getBegin();
	F32 end    = mParams.getEnd();

	t_step = 1.0f / sides;
	ang_step = 2.0f*F_PI*t_step*ang_scale;

	// Scale to have size "match" scale.  Compensates to get object to generally fill bounding box.

	S32 total_sides = llround(sides / ang_scale);	// Total number of sides all around

	if (total_sides < 8)
	{
		scale = tableScale[total_sides];
	}

	t_first = floor(begin * sides) / (F32)sides;

	// pt1 is the first point on the fractional face.
	// Starting t and ang values for the first face
	t = t_first;
	ang = 2.0f*F_PI*(t*ang_scale + offset);
	pt1.setVec(cos(ang)*scale,sin(ang)*scale, t);

	// Increment to the next point.
	// pt2 is the end point on the fractional face
	t += t_step;
	ang += ang_step;
	pt2.setVec(cos(ang)*scale,sin(ang)*scale,t);

	t_fraction = (begin - t_first)*sides;

	// Only use if it's not almost exactly on an edge.
	if (t_fraction < 0.9999f)
	{
		LLVector3 new_pt = lerp(pt1, pt2, t_fraction);
		F32 pt_x = new_pt.mV[VX];
		if (pt_x < mMinX)
		{
			mMinX = pt_x;
		}
		else if (pt_x > mMaxX)
		{
			mMaxX = pt_x;
		}
		mProfile.push_back(new_pt);
	}

	// There's lots of potential here for floating point error to generate unneeded extra points - DJS 04/05/02
	while (t < end)
	{
		// Iterate through all the integer steps of t.
		pt1.setVec(cos(ang)*scale,sin(ang)*scale,t);

		F32 pt_x = pt1.mV[VX];
		if (pt_x < mMinX)
		{
			mMinX = pt_x;
		}
		else if (pt_x > mMaxX)
		{
			mMaxX = pt_x;
		}

		if (mProfile.size() > 0) {
			LLVector3 p = mProfile[mProfile.size()-1];
			for (S32 i = 0; i < split && mProfile.size() > 0; i++) {
				mProfile.push_back(p+(pt1-p) * 1.0f/(float)(split+1) * (float)(i+1));
			}
		}
		mProfile.push_back(pt1);

		t += t_step;
		ang += ang_step;
	}

	t_fraction = (end - (t - t_step))*sides;

	// pt1 is the first point on the fractional face
	// pt2 is the end point on the fractional face
	pt2.setVec(cos(ang)*scale,sin(ang)*scale,t);

	// Find the fraction that we need to add to the end point.
	t_fraction = (end - (t - t_step))*sides;
	if (t_fraction > 0.0001f)
	{
		LLVector3 new_pt = lerp(pt1, pt2, t_fraction);
		F32 pt_x = new_pt.mV[VX];
		if (pt_x < mMinX)
		{
			mMinX = pt_x;
		}
		else if (pt_x > mMaxX)
		{
			mMaxX = pt_x;
		}
		
		if (mProfile.size() > 0) {
			LLVector3 p = mProfile[mProfile.size()-1];
			for (S32 i = 0; i < split && mProfile.size() > 0; i++) {
				mProfile.push_back(p+(new_pt-p) * 1.0f/(float)(split+1) * (float)(i+1));
			}
		}
		mProfile.push_back(new_pt);
	}

	// If we're sliced, the profile is open.
	if ((end - begin)*ang_scale < 0.99f)
	{
		if ((end - begin)*ang_scale > 0.5f)
		{
			mConcave = TRUE;
		}
		else
		{
			mConcave = FALSE;
		}
		mOpen = TRUE;
		if (!isHollow())
		{
			// put center point if not hollow.
			mProfile.push_back(LLVector3(0,0,0));
		}
	}
	else
	{
		// The profile isn't open.
		mOpen = FALSE;
		mConcave = FALSE;
	}

	mTotal = mProfile.size();
}

void LLProfile::genNormals()
{
	S32 count = mProfile.size();

	S32 outer_count;
	if (mTotalOut)
	{
		outer_count = mTotalOut;
	}
	else
	{
		outer_count = mTotal / 2;
	}

	mEdgeNormals.resize(count * 2);
	mEdgeCenters.resize(count * 2);
	mNormals.resize(count);

	LLVector2 pt0,pt1;

	BOOL hollow;
	hollow = isHollow();

	S32 i0, i1, i2, i3, i4;

	// Parametrically generate normal
	for (i2 = 0; i2 < count; i2++)
	{
		mNormals[i2].mV[0] = mProfile[i2].mV[0];
		mNormals[i2].mV[1] = mProfile[i2].mV[1];
		if (hollow && (i2 >= outer_count))
		{
			mNormals[i2] *= -1.f;
		}
		if (mNormals[i2].magVec() < 0.001)
		{
			// Special case for point at center, get adjacent points.
			i1 = (i2 - 1) >= 0 ? i2 - 1 : count - 1;
			i0 = (i1 - 1) >= 0 ? i1 - 1 : count - 1;
			i3 = (i2 + 1) < count ? i2 + 1 : 0;
			i4 = (i3 + 1) < count ? i3 + 1 : 0;

			pt0.setVec(mProfile[i1].mV[VX] + mProfile[i1].mV[VX] - mProfile[i0].mV[VX], 
				mProfile[i1].mV[VY] + mProfile[i1].mV[VY] - mProfile[i0].mV[VY]);
			pt1.setVec(mProfile[i3].mV[VX] + mProfile[i3].mV[VX] - mProfile[i4].mV[VX], 
				mProfile[i3].mV[VY] + mProfile[i3].mV[VY] - mProfile[i4].mV[VY]);

			mNormals[i2] = pt0 + pt1;
			mNormals[i2] *= 0.5f;
		}
		mNormals[i2].normVec();
	}

	S32 num_normal_sets = isConcave() ? 2 : 1;
	for (S32 normal_set = 0; normal_set < num_normal_sets; normal_set++)
	{
		S32 point_num;
		for (point_num = 0; point_num < mTotal; point_num++)
		{
			LLVector3 point_1 = mProfile[point_num];
			point_1.mV[VZ] = 0.f;

			LLVector3 point_2;
			
			if (isConcave() && normal_set == 0 && point_num == (mTotal - 1) / 2)
			{
				point_2 = mProfile[mTotal - 1];
			}
			else if (isConcave() && normal_set == 1 && point_num == mTotal - 1)
			{
				point_2 = mProfile[(mTotal - 1) / 2];
			}
			else
			{
				LLVector3 delta_pos;
				S32 neighbor_point = (point_num + 1) % mTotal;
				while(delta_pos.magVecSquared() < 0.01f * 0.01f)
				{
					point_2 = mProfile[neighbor_point];
					delta_pos = point_2 - point_1;
					neighbor_point = (neighbor_point + 1) % mTotal;
					if (neighbor_point == point_num)
					{
						break;
					}
				}
			}

			point_2.mV[VZ] = 0.f;
			LLVector3 face_normal = (point_2 - point_1) % LLVector3::z_axis;
			face_normal.normVec();
			mEdgeNormals[normal_set * count + point_num] = face_normal;
			mEdgeCenters[normal_set * count + point_num] = lerp(point_1, point_2, 0.5f);
		}
	}
}


// Hollow is percent of the original bounding box, not of this particular
// profile's geometry.  Thus, a swept triangle needs lower hollow values than
// a swept square.
LLProfile::Face* LLProfile::addHole(BOOL flat, F32 sides, F32 offset, F32 box_hollow, F32 ang_scale, S32 split)
{
	// Note that addHole will NOT work for non-"circular" profiles, if we ever decide to use them.

	// Total add has number of vertices on outside.
	mTotalOut = mTotal;

	// Why is the "bevel" parameter -1? DJS 04/05/02
	genNGon(llfloor(sides),offset,-1, ang_scale, split);

	Face *face = addFace(mTotalOut, mTotal-mTotalOut,0,LL_FACE_INNER_SIDE, flat);

	LLVector3 pt[128];

	for (S32 i=mTotalOut;i<mTotal;i++)
	{
		pt[i] = mProfile[i] * box_hollow;
	}

	S32 j=mTotal-1;
	for (S32 i=mTotalOut;i<mTotal;i++)
	{
		mProfile[i] = pt[j--];
	}

	for (S32 i=0;i<(S32)mFaces.size();i++) 
	{
		if (mFaces[i].mCap)
		{
			mFaces[i].mCount *= 2;
		}
	}

	return face;
}


F32 next_power_of_two(F32 value)
{
	S32 power = (S32)llceil((F32)log((double)value)/(F32)log(2.0));
	return pow(2.0f, power);
}



BOOL LLProfile::generate(BOOL path_open,F32 detail, S32 split, BOOL is_sculpted)
{
	if ((!mDirty) && (!is_sculpted))
	{
		return FALSE;
	}
	mDirty = FALSE;

	if (detail < MIN_LOD)
	{
		llinfos << "Generating profile with LOD < MIN_LOD.  CLAMPING" << llendl;
		detail = MIN_LOD;
	}

	mProfile.clear();
	mFaces.clear();

	// Generate the face data
	S32 i;
	F32 begin = mParams.getBegin();
	F32 end = mParams.getEnd();
	F32 hollow = mParams.getHollow();

	// Quick validation to eliminate some server crashes.
	if (begin > end - 0.01f)
	{
		llwarns << "LLProfile::generate() assertion failed (begin >= end)" << llendl;
		return FALSE;
	}

	S32 face_num = 0;

	switch (mParams.getCurveType() & LL_PCODE_PROFILE_MASK)
	{
	case LL_PCODE_PROFILE_SQUARE:
		{
			genNGon(4,-0.375, 0, 1, split);
			if (path_open)
			{
				addCap (LL_FACE_PATH_BEGIN);
			}

			for (i = llfloor(begin * 4.f); i < llfloor(end * 4.f + .999f); i++)
			{
				addFace((face_num++) * (split +1), split+2, 1, LL_FACE_OUTER_SIDE_0 << i, TRUE);
			}

			for (i = 0; i <(S32) mProfile.size(); i++)
			{
				// Scale by 4 to generate proper tex coords.
				mProfile[i].mV[2] *= 4.f;
			}

			if (hollow)
			{
				switch (mParams.getCurveType() & LL_PCODE_HOLE_MASK)
				{
				case LL_PCODE_HOLE_TRIANGLE:
					// This offset is not correct, but we can't change it now... DK 11/17/04
					addHole(TRUE, 3, -0.375f, hollow, 1.f, split);
					break;
				case LL_PCODE_HOLE_CIRCLE:
					// TODO: Compute actual detail levels for cubes
					addHole(FALSE, MIN_DETAIL_FACES * detail, -0.375f, hollow, 1.f);
					break;
				case LL_PCODE_HOLE_SAME:
				case LL_PCODE_HOLE_SQUARE:
				default:
					addHole(TRUE, 4, -0.375f, hollow, 1.f, split);
					break;
				}
			}
			
			if (path_open) {
				mFaces[0].mCount = mTotal;
			}
		}
		break;
	case  LL_PCODE_PROFILE_ISOTRI:
	case  LL_PCODE_PROFILE_RIGHTTRI:
	case  LL_PCODE_PROFILE_EQUALTRI:
		{
			genNGon(3,0, 0, 1, split);
			for (i = 0; i <(S32) mProfile.size(); i++)
			{
				// Scale by 3 to generate proper tex coords.
				mProfile[i].mV[2] *= 3.f;
			}

			if (path_open)
			{
				addCap(LL_FACE_PATH_BEGIN);
			}

			for (i = llfloor(begin * 3.f); i < llfloor(end * 3.f + .999f); i++)
			{
				addFace((face_num++) * (split +1), split+2, 1, LL_FACE_OUTER_SIDE_0 << i, TRUE);
			}
			if (hollow)
			{
				// Swept triangles need smaller hollowness values,
				// because the triangle doesn't fill the bounding box.
				F32 triangle_hollow = hollow / 2.f;

				switch (mParams.getCurveType() & LL_PCODE_HOLE_MASK)
				{
				case LL_PCODE_HOLE_CIRCLE:
					// TODO: Actually generate level of detail for triangles
					addHole(FALSE, MIN_DETAIL_FACES * detail, 0, triangle_hollow, 1.f);
					break;
				case LL_PCODE_HOLE_SQUARE:
					addHole(TRUE, 4, 0, triangle_hollow, 1.f, split);
					break;
				case LL_PCODE_HOLE_SAME:
				case LL_PCODE_HOLE_TRIANGLE:
				default:
					addHole(TRUE, 3, 0, triangle_hollow, 1.f, split);
					break;
				}
			}
		}
		break;
	case LL_PCODE_PROFILE_CIRCLE:
		{
			// If this has a square hollow, we should adjust the
			// number of faces a bit so that the geometry lines up.
			U8 hole_type=0;
			F32 circle_detail = MIN_DETAIL_FACES * detail;
			if (hollow)
			{
				hole_type = mParams.getCurveType() & LL_PCODE_HOLE_MASK;
				if (hole_type == LL_PCODE_HOLE_SQUARE)
				{
					// Snap to the next multiple of four sides,
					// so that corners line up.
					circle_detail = llceil(circle_detail / 4.0f) * 4.0f;
				}
			}

			S32 sides = (S32)circle_detail;

			if (is_sculpted)
				sides = (S32)next_power_of_two((F32)sides);
			
			genNGon(sides);
			
			if (path_open)
			{
				addCap (LL_FACE_PATH_BEGIN);
			}

			if (mOpen && !hollow)
			{
				addFace(0,mTotal-1,0,LL_FACE_OUTER_SIDE_0, FALSE);
			}
			else
			{
				addFace(0,mTotal,0,LL_FACE_OUTER_SIDE_0, FALSE);
			}

			if (hollow)
			{
				switch (hole_type)
				{
				case LL_PCODE_HOLE_SQUARE:
					addHole(TRUE, 4, 0, hollow, 1.f, split);
					break;
				case LL_PCODE_HOLE_TRIANGLE:
					addHole(TRUE, 3, 0, hollow, 1.f, split);
					break;
				case LL_PCODE_HOLE_CIRCLE:
				case LL_PCODE_HOLE_SAME:
				default:
					addHole(FALSE, circle_detail, 0, hollow, 1.f);
					break;
				}
			}
		}
		break;
	case LL_PCODE_PROFILE_CIRCLE_HALF:
		{
			// If this has a square hollow, we should adjust the
			// number of faces a bit so that the geometry lines up.
			U8 hole_type=0;
			// Number of faces is cut in half because it's only a half-circle.
			F32 circle_detail = MIN_DETAIL_FACES * detail * 0.5f;
			if (hollow)
			{
				hole_type = mParams.getCurveType() & LL_PCODE_HOLE_MASK;
				if (hole_type == LL_PCODE_HOLE_SQUARE)
				{
					// Snap to the next multiple of four sides (div 2),
					// so that corners line up.
					circle_detail = llceil(circle_detail / 2.0f) * 2.0f;
				}
			}
			genNGon(llfloor(circle_detail), 0.5f, 0.f, 0.5f);
			if (path_open)
			{
				addCap(LL_FACE_PATH_BEGIN);
			}
			if (mOpen && !mParams.getHollow())
			{
				addFace(0,mTotal-1,0,LL_FACE_OUTER_SIDE_0, FALSE);
			}
			else
			{
				addFace(0,mTotal,0,LL_FACE_OUTER_SIDE_0, FALSE);
			}

			if (hollow)
			{
				switch (hole_type)
				{
				case LL_PCODE_HOLE_SQUARE:
					addHole(TRUE, 2, 0.5f, hollow, 0.5f, split);
					break;
				case LL_PCODE_HOLE_TRIANGLE:
					addHole(TRUE, 3,  0.5f, hollow, 0.5f, split);
					break;
				case LL_PCODE_HOLE_CIRCLE:
				case LL_PCODE_HOLE_SAME:
				default:
					addHole(FALSE, circle_detail,  0.5f, hollow, 0.5f);
					break;
				}
			}

			// Special case for openness of sphere
			if ((mParams.getEnd() - mParams.getBegin()) < 1.f)
			{
				mOpen = TRUE;
			}
			else if (!hollow)
			{
				mOpen = FALSE;
				mProfile.push_back(mProfile[0]);
				mTotal++;
			}
		}
		break;
	default:
	    llerrs << "Unknown profile: getCurveType()=" << mParams.getCurveType() << llendl;
		break;
	};

	if (path_open)
	{
		addCap(LL_FACE_PATH_END); // bottom
	}
	
	if ( mOpen) // interior edge caps
	{
		addFace(mTotal-1, 2,0.5,LL_FACE_PROFILE_BEGIN, TRUE); 

		if (hollow)
		{
			addFace(mTotalOut-1, 2,0.5,LL_FACE_PROFILE_END, TRUE);
		}
		else
		{
			addFace(mTotal-2, 2,0.5,LL_FACE_PROFILE_END, TRUE);
		}
	}
	
	//genNormals();

	return TRUE;
}



BOOL LLProfileParams::importFile(FILE *fp)
{
	const S32 BUFSIZE = 16384;
	char buffer[BUFSIZE];	/* Flawfinder: ignore */
	// *NOTE: changing the size or type of these buffers will require
	// changing the sscanf below.
	char keyword[256];	/* Flawfinder: ignore */
	char valuestr[256];	/* Flawfinder: ignore */
	keyword[0] = 0;
	valuestr[0] = 0;
	F32 tempF32;
	U32 tempU32;

	while (!feof(fp))
	{
		fgets(buffer, BUFSIZE, fp);
		sscanf(	/* Flawfinder: ignore */
			buffer,
			" %255s %255s",
			keyword, valuestr);
		if (!strcmp("{", keyword))
		{
			continue;
		}
		if (!strcmp("}",keyword))
		{
			break;
		}
		else if (!strcmp("curve", keyword))
		{
			sscanf(valuestr,"%d",&tempU32);
			setCurveType((U8) tempU32);
		}
		else if (!strcmp("begin",keyword))
		{
			sscanf(valuestr,"%g",&tempF32);
			setBegin(tempF32);
		}
		else if (!strcmp("end",keyword))
		{
			sscanf(valuestr,"%g",&tempF32);
			setEnd(tempF32);
		}
		else if (!strcmp("hollow",keyword))
		{
			sscanf(valuestr,"%g",&tempF32);
			setHollow(tempF32);
		}
		else
		{
			llwarns << "unknown keyword " << keyword << " in profile import" << llendl;
		}
	}

	return TRUE;
}


BOOL LLProfileParams::exportFile(FILE *fp) const
{
	fprintf(fp,"\t\tprofile 0\n");
	fprintf(fp,"\t\t{\n");
	fprintf(fp,"\t\t\tcurve\t%d\n", getCurveType());
	fprintf(fp,"\t\t\tbegin\t%g\n", getBegin());
	fprintf(fp,"\t\t\tend\t%g\n", getEnd());
	fprintf(fp,"\t\t\thollow\t%g\n", getHollow());
	fprintf(fp, "\t\t}\n");
	return TRUE;
}


BOOL LLProfileParams::importLegacyStream(std::istream& input_stream)
{
	const S32 BUFSIZE = 16384;
	char buffer[BUFSIZE];	/* Flawfinder: ignore */
	// *NOTE: changing the size or type of these buffers will require
	// changing the sscanf below.
	char keyword[256];	/* Flawfinder: ignore */
	char valuestr[256];	/* Flawfinder: ignore */
	keyword[0] = 0;
	valuestr[0] = 0;
	F32 tempF32;
	U32 tempU32;

	while (input_stream.good())
	{
		input_stream.getline(buffer, BUFSIZE);
		sscanf(	/* Flawfinder: ignore */
			buffer,
			" %255s %255s",
			keyword,
			valuestr);
		if (!strcmp("{", keyword))
		{
			continue;
		}
		if (!strcmp("}",keyword))
		{
			break;
		}
		else if (!strcmp("curve", keyword))
		{
			sscanf(valuestr,"%d",&tempU32);
			setCurveType((U8) tempU32);
		}
		else if (!strcmp("begin",keyword))
		{
			sscanf(valuestr,"%g",&tempF32);
			setBegin(tempF32);
		}
		else if (!strcmp("end",keyword))
		{
			sscanf(valuestr,"%g",&tempF32);
			setEnd(tempF32);
		}
		else if (!strcmp("hollow",keyword))
		{
			sscanf(valuestr,"%g",&tempF32);
			setHollow(tempF32);
		}
		else
		{
 		llwarns << "unknown keyword " << keyword << " in profile import" << llendl;
		}
	}

	return TRUE;
}


BOOL LLProfileParams::exportLegacyStream(std::ostream& output_stream) const
{
	output_stream <<"\t\tprofile 0\n";
	output_stream <<"\t\t{\n";
	output_stream <<"\t\t\tcurve\t" << (S32) getCurveType() << "\n";
	output_stream <<"\t\t\tbegin\t" << getBegin() << "\n";
	output_stream <<"\t\t\tend\t" << getEnd() << "\n";
	output_stream <<"\t\t\thollow\t" << getHollow() << "\n";
	output_stream << "\t\t}\n";
	return TRUE;
}

LLSD LLProfileParams::asLLSD() const
{
	LLSD sd;

	sd["curve"] = getCurveType();
	sd["begin"] = getBegin();
	sd["end"] = getEnd();
	sd["hollow"] = getHollow();
	return sd;
}

bool LLProfileParams::fromLLSD(LLSD& sd)
{
	setCurveType(sd["curve"].asInteger());
	setBegin((F32)sd["begin"].asReal());
	setEnd((F32)sd["end"].asReal());
	setHollow((F32)sd["hollow"].asReal());
	return true;
}

void LLProfileParams::copyParams(const LLProfileParams &params)
{
	setCurveType(params.getCurveType());
	setBegin(params.getBegin());
	setEnd(params.getEnd());
	setHollow(params.getHollow());
}


LLPath::~LLPath()
{
}

void LLPath::genNGon(S32 sides, F32 startOff, F32 end_scale, F32 twist_scale)
{
	// Generates a circular path, starting at (1, 0, 0), counterclockwise along the xz plane.
	const F32 tableScale[] = { 1, 1, 1, 0.5f, 0.707107f, 0.53f, 0.525f, 0.5f };

	F32 revolutions = mParams.getRevolutions();
	F32 skew		= mParams.getSkew();
	F32 skew_mag	= fabs(skew);
	F32 hole_x		= mParams.getScaleX() * (1.0f - skew_mag);
	F32 hole_y		= mParams.getScaleY();

	// Calculate taper begin/end for x,y (Negative means taper the beginning)
	F32 taper_x_begin	= 1.0f;
	F32 taper_x_end		= 1.0f - mParams.getTaperX();
	F32	taper_y_begin	= 1.0f;
	F32	taper_y_end		= 1.0f - mParams.getTaperY();

	if ( taper_x_end > 1.0f )
	{
		// Flip tapering.
		taper_x_begin	= 2.0f - taper_x_end;
		taper_x_end		= 1.0f;
	}
	if ( taper_y_end > 1.0f )
	{
		// Flip tapering.
		taper_y_begin	= 2.0f - taper_y_end;
		taper_y_end		= 1.0f;
	}

	// For spheres, the radius is usually zero.
	F32 radius_start = 0.5f;
	if (sides < 8)
	{
		radius_start = tableScale[sides];
	}

	// Scale the radius to take the hole size into account.
	radius_start *= 1.0f - hole_y;
	
	// Now check the radius offset to calculate the start,end radius.  (Negative means
	// decrease the start radius instead).
	F32 radius_end    = radius_start;
	F32 radius_offset = mParams.getRadiusOffset();
	if (radius_offset < 0.f)
	{
		radius_start *= 1.f + radius_offset;
	}
	else
	{
		radius_end   *= 1.f - radius_offset;
	}	

	// Is the path NOT a closed loop?
	mOpen = ( (mParams.getEnd()*end_scale - mParams.getBegin() < 1.0f) ||
		      (skew_mag > 0.001f) ||
			  (fabs(taper_x_end - taper_x_begin) > 0.001f) ||
			  (fabs(taper_y_end - taper_y_begin) > 0.001f) ||
			  (fabs(radius_end - radius_start) > 0.001f) );

	F32 ang, c, s;
	LLQuaternion twist, qang;
	PathPt *pt;
	LLVector3 path_axis (1.f, 0.f, 0.f);
	//LLVector3 twist_axis(0.f, 0.f, 1.f);
	F32 twist_begin = mParams.getTwistBegin() * twist_scale;
	F32 twist_end	= mParams.getTwist() * twist_scale;

	// We run through this once before the main loop, to make sure
	// the path begins at the correct cut.
	F32 step= 1.0f / sides;
	F32 t	= mParams.getBegin();
	pt		= vector_append(mPath, 1);
	ang		= 2.0f*F_PI*revolutions * t;
	s		= sin(ang)*lerp(radius_start, radius_end, t);	
	c		= cos(ang)*lerp(radius_start, radius_end, t);


	pt->mPos.setVec(0 + lerp(0,mParams.getShear().mV[0],s)
					  + lerp(-skew ,skew, t) * 0.5f,
					c + lerp(0,mParams.getShear().mV[1],s), 
					s);
	pt->mScale.mV[VX] = hole_x * lerp(taper_x_begin, taper_x_end, t);
	pt->mScale.mV[VY] = hole_y * lerp(taper_y_begin, taper_y_end, t);
	pt->mTexT  = t;
	
	// Twist rotates the path along the x,y plane (I think) - DJS 04/05/02
	twist.setQuat  (lerp(twist_begin,twist_end,t) * 2.f * F_PI - F_PI,0,0,1);
	// Rotate the point around the circle's center.
	qang.setQuat   (ang,path_axis);
	pt->mRot   = twist * qang;

	t+=step;

	// Snap to a quantized parameter, so that cut does not
	// affect most sample points.
	t = ((S32)(t * sides)) / (F32)sides;

	// Run through the non-cut dependent points.
	while (t < mParams.getEnd())
	{
		pt		= vector_append(mPath, 1);

		ang = 2.0f*F_PI*revolutions * t;
		c   = cos(ang)*lerp(radius_start, radius_end, t);
		s   = sin(ang)*lerp(radius_start, radius_end, t);

		pt->mPos.setVec(0 + lerp(0,mParams.getShear().mV[0],s)
					      + lerp(-skew ,skew, t) * 0.5f,
						c + lerp(0,mParams.getShear().mV[1],s), 
						s);

		pt->mScale.mV[VX] = hole_x * lerp(taper_x_begin, taper_x_end, t);
		pt->mScale.mV[VY] = hole_y * lerp(taper_y_begin, taper_y_end, t);
		pt->mTexT  = t;

		// Twist rotates the path along the x,y plane (I think) - DJS 04/05/02
		twist.setQuat  (lerp(twist_begin,twist_end,t) * 2.f * F_PI - F_PI,0,0,1);
		// Rotate the point around the circle's center.
		qang.setQuat   (ang,path_axis);
		pt->mRot	= twist * qang;

		t+=step;
	}

	// Make one final pass for the end cut.
	t = mParams.getEnd();
	pt		= vector_append(mPath, 1);
	ang = 2.0f*F_PI*revolutions * t;
	c   = cos(ang)*lerp(radius_start, radius_end, t);
	s   = sin(ang)*lerp(radius_start, radius_end, t);

	pt->mPos.setVec(0 + lerp(0,mParams.getShear().mV[0],s)
					  + lerp(-skew ,skew, t) * 0.5f,
					c + lerp(0,mParams.getShear().mV[1],s), 
					s);
	pt->mScale.mV[VX] = hole_x * lerp(taper_x_begin, taper_x_end, t);
	pt->mScale.mV[VY] = hole_y * lerp(taper_y_begin, taper_y_end, t);
	pt->mTexT  = t;
	
	// Twist rotates the path along the x,y plane (I think) - DJS 04/05/02
	twist.setQuat  (lerp(twist_begin,twist_end,t) * 2.f * F_PI - F_PI,0,0,1);
	// Rotate the point around the circle's center.
	qang.setQuat   (ang,path_axis);
	pt->mRot   = twist * qang;

	mTotal = mPath.size();
}

const LLVector2 LLPathParams::getBeginScale() const
{
	LLVector2 begin_scale(1.f, 1.f);
	if (getScaleX() > 1)
	{
		begin_scale.mV[0] = 2-getScaleX();
	}
	if (getScaleY() > 1)
	{
		begin_scale.mV[1] = 2-getScaleY();
	}
	return begin_scale;
}

const LLVector2 LLPathParams::getEndScale() const
{
	LLVector2 end_scale(1.f, 1.f);
	if (getScaleX() < 1)
	{
		end_scale.mV[0] = getScaleX();
	}
	if (getScaleY() < 1)
	{
		end_scale.mV[1] = getScaleY();
	}
	return end_scale;
}

BOOL LLPath::generate(F32 detail, S32 split, BOOL is_sculpted)
{
	if ((!mDirty) && (!is_sculpted))
	{
		return FALSE;
	}

	if (detail < MIN_LOD)
	{
		llinfos << "Generating path with LOD < MIN!  Clamping to 1" << llendl;
		detail = MIN_LOD;
	}

	mDirty = FALSE;
	S32 np = 2; // hardcode for line

	mPath.clear();
	mOpen = TRUE;

	// Is this 0xf0 mask really necessary?  DK 03/02/05
	switch (mParams.getCurveType() & 0xf0)
	{
	default:
	case LL_PCODE_PATH_LINE:
		{
			// Take the begin/end twist into account for detail.
			np    = llfloor(fabs(mParams.getTwistBegin() - mParams.getTwist()) * 3.5f * (detail-0.5f)) + 2;
			if (np < split+2)
			{
				np = split+2;
			}

			mStep = 1.0f / (np-1);
			
			mPath.resize(np);

			LLVector2 start_scale = mParams.getBeginScale();
			LLVector2 end_scale = mParams.getEndScale();

			for (S32 i=0;i<np;i++)
			{
				F32 t = lerp(mParams.getBegin(),mParams.getEnd(),(F32)i * mStep);
				mPath[i].mPos.setVec(lerp(0,mParams.getShear().mV[0],t),
									 lerp(0,mParams.getShear().mV[1],t),
									 t - 0.5f);
				mPath[i].mRot.setQuat(lerp(F_PI * mParams.getTwistBegin(),F_PI * mParams.getTwist(),t),0,0,1);
				mPath[i].mScale.mV[0] = lerp(start_scale.mV[0],end_scale.mV[0],t);
				mPath[i].mScale.mV[1] = lerp(start_scale.mV[1],end_scale.mV[1],t);
				mPath[i].mTexT        = t;
			}
		}
		break;

	case LL_PCODE_PATH_CIRCLE:
		{
			// Increase the detail as the revolutions and twist increase.
			F32 twist_mag = fabs(mParams.getTwistBegin() - mParams.getTwist());

			S32 sides = (S32)llfloor(llfloor((MIN_DETAIL_FACES * detail + twist_mag * 3.5f * (detail-0.5f))) * mParams.getRevolutions());

			if (is_sculpted)
				sides = (S32)next_power_of_two((F32)sides);
			
			genNGon(sides);
		}
		break;

	case LL_PCODE_PATH_CIRCLE2:
		{
			if (mParams.getEnd() - mParams.getBegin() >= 0.99f &&
				mParams.getScaleX() >= .99f)
			{
				mOpen = FALSE;
			}

			//genNGon(llfloor(MIN_DETAIL_FACES * detail), 4.f, 0.f);
			genNGon(llfloor(MIN_DETAIL_FACES * detail));

			F32 t     = 0.f;
			F32 tStep = 1.0f / mPath.size();

			F32 toggle = 0.5f;
			for (S32 i=0;i<(S32)mPath.size();i++)
			{
				mPath[i].mPos.mV[0] = toggle;
				if (toggle == 0.5f)
					toggle = -0.5f;
				else
					toggle = 0.5f;
				t += tStep;
			}
		}

		break;

	case LL_PCODE_PATH_TEST:

		np     = 5;
		mStep = 1.0f / (np-1);
		
		mPath.resize(np);

		for (S32 i=0;i<np;i++)
		{
			F32 t = (F32)i * mStep;
			mPath[i].mPos.setVec(0,
								lerp(0,   -sin(F_PI*mParams.getTwist()*t)*0.5f,t),
								lerp(-0.5, cos(F_PI*mParams.getTwist()*t)*0.5f,t));
			mPath[i].mScale.mV[0] = lerp(1,mParams.getScale().mV[0],t);
			mPath[i].mScale.mV[1] = lerp(1,mParams.getScale().mV[1],t);
			mPath[i].mTexT  = t;
			mPath[i].mRot.setQuat(F_PI * mParams.getTwist() * t,1,0,0);
		}

		break;
	};

	if (mParams.getTwist() != mParams.getTwistBegin()) mOpen = TRUE;

	//if ((int(fabsf(mParams.getTwist() - mParams.getTwistBegin())*100))%100 != 0) {
	//	mOpen = TRUE;
	//}
	
	return TRUE;
}

BOOL LLDynamicPath::generate(F32 detail, S32 split, BOOL is_sculpted)
{
	mOpen = TRUE; // Draw end caps
	if (getPathLength() == 0)
	{
		// Path hasn't been generated yet.
		// Some algorithms later assume at least TWO path points.
		resizePath(2);
		for (U32 i = 0; i < 2; i++)
		{
			mPath[i].mPos.setVec(0, 0, 0);
			mPath[i].mRot.setQuat(0, 0, 0);
			mPath[i].mScale.setVec(1, 1);
			mPath[i].mTexT = 0;
		}
	}

	return TRUE;
}


BOOL LLPathParams::importFile(FILE *fp)
{
	const S32 BUFSIZE = 16384;
	char buffer[BUFSIZE];	/* Flawfinder: ignore */
	// *NOTE: changing the size or type of these buffers will require
	// changing the sscanf below.
	char keyword[256];	/* Flawfinder: ignore */
	char valuestr[256];	/* Flawfinder: ignore */
	keyword[0] = 0;
	valuestr[0] = 0;

	F32 tempF32;
	F32 x, y;
	U32 tempU32;

	while (!feof(fp))
	{
		fgets(buffer, BUFSIZE, fp);
		sscanf(	/* Flawfinder: ignore */
			buffer,
			" %255s %255s",
			keyword, valuestr);
		if (!strcmp("{", keyword))
		{
			continue;
		}
		if (!strcmp("}",keyword))
		{
			break;
		}
		else if (!strcmp("curve", keyword))
		{
			sscanf(valuestr,"%d",&tempU32);
			setCurveType((U8) tempU32);
		}
		else if (!strcmp("begin",keyword))
		{
			sscanf(valuestr,"%g",&tempF32);
			setBegin(tempF32);
		}
		else if (!strcmp("end",keyword))
		{
			sscanf(valuestr,"%g",&tempF32);
			setEnd(tempF32);
		}
		else if (!strcmp("scale",keyword))
		{
			// Legacy for one dimensional scale per path
			sscanf(valuestr,"%g",&tempF32);
			setScale(tempF32, tempF32);
		}
		else if (!strcmp("scale_x", keyword))
		{
			sscanf(valuestr, "%g", &x);
			setScaleX(x);
		}
		else if (!strcmp("scale_y", keyword))
		{
			sscanf(valuestr, "%g", &y);
			setScaleY(y);
		}
		else if (!strcmp("shear_x", keyword))
		{
			sscanf(valuestr, "%g", &x);
			setShearX(x);
		}
		else if (!strcmp("shear_y", keyword))
		{
			sscanf(valuestr, "%g", &y);
			setShearY(y);
		}
		else if (!strcmp("twist",keyword))
		{
			sscanf(valuestr,"%g",&tempF32);
			setTwist(tempF32);
		}
		else if (!strcmp("twist_begin", keyword))
		{
			sscanf(valuestr, "%g", &y);
			setTwistBegin(y);
		}
		else if (!strcmp("radius_offset", keyword))
		{
			sscanf(valuestr, "%g", &y);
			setRadiusOffset(y);
		}
		else if (!strcmp("taper_x", keyword))
		{
			sscanf(valuestr, "%g", &y);
			setTaperX(y);
		}
		else if (!strcmp("taper_y", keyword))
		{
			sscanf(valuestr, "%g", &y);
			setTaperY(y);
		}
		else if (!strcmp("revolutions", keyword))
		{
			sscanf(valuestr, "%g", &y);
			setRevolutions(y);
		}
		else if (!strcmp("skew", keyword))
		{
			sscanf(valuestr, "%g", &y);
			setSkew(y);
		}
		else
		{
			llwarns << "unknown keyword " << " in path import" << llendl;
		}
	}
	return TRUE;
}


BOOL LLPathParams::exportFile(FILE *fp) const
{
	fprintf(fp, "\t\tpath 0\n");
	fprintf(fp, "\t\t{\n");
	fprintf(fp, "\t\t\tcurve\t%d\n", getCurveType());
	fprintf(fp, "\t\t\tbegin\t%g\n", getBegin());
	fprintf(fp, "\t\t\tend\t%g\n", getEnd());
	fprintf(fp, "\t\t\tscale_x\t%g\n", getScaleX() );
	fprintf(fp, "\t\t\tscale_y\t%g\n", getScaleY() );
	fprintf(fp, "\t\t\tshear_x\t%g\n", getShearX() );
	fprintf(fp, "\t\t\tshear_y\t%g\n", getShearY() );
	fprintf(fp,"\t\t\ttwist\t%g\n", getTwist());
	
	fprintf(fp,"\t\t\ttwist_begin\t%g\n", getTwistBegin());
	fprintf(fp,"\t\t\tradius_offset\t%g\n", getRadiusOffset());
	fprintf(fp,"\t\t\ttaper_x\t%g\n", getTaperX());
	fprintf(fp,"\t\t\ttaper_y\t%g\n", getTaperY());
	fprintf(fp,"\t\t\trevolutions\t%g\n", getRevolutions());
	fprintf(fp,"\t\t\tskew\t%g\n", getSkew());

	fprintf(fp, "\t\t}\n");
	return TRUE;
}


BOOL LLPathParams::importLegacyStream(std::istream& input_stream)
{
	const S32 BUFSIZE = 16384;
	char buffer[BUFSIZE];	/* Flawfinder: ignore */
	// *NOTE: changing the size or type of these buffers will require
	// changing the sscanf below.
	char keyword[256];	/* Flawfinder: ignore */
	char valuestr[256];	/* Flawfinder: ignore */
	keyword[0] = 0;
	valuestr[0] = 0;

	F32 tempF32;
	F32 x, y;
	U32 tempU32;

	while (input_stream.good())
	{
		input_stream.getline(buffer, BUFSIZE);
		sscanf(	/* Flawfinder: ignore */
			buffer,
			" %255s %255s",
			keyword, valuestr);
		if (!strcmp("{", keyword))
		{
			continue;
		}
		if (!strcmp("}",keyword))
		{
			break;
		}
		else if (!strcmp("curve", keyword))
		{
			sscanf(valuestr,"%d",&tempU32);
			setCurveType((U8) tempU32);
		}
		else if (!strcmp("begin",keyword))
		{
			sscanf(valuestr,"%g",&tempF32);
			setBegin(tempF32);
		}
		else if (!strcmp("end",keyword))
		{
			sscanf(valuestr,"%g",&tempF32);
			setEnd(tempF32);
		}
		else if (!strcmp("scale",keyword))
		{
			// Legacy for one dimensional scale per path
			sscanf(valuestr,"%g",&tempF32);
			setScale(tempF32, tempF32);
		}
		else if (!strcmp("scale_x", keyword))
		{
			sscanf(valuestr, "%g", &x);
			setScaleX(x);
		}
		else if (!strcmp("scale_y", keyword))
		{
			sscanf(valuestr, "%g", &y);
			setScaleY(y);
		}
		else if (!strcmp("shear_x", keyword))
		{
			sscanf(valuestr, "%g", &x);
			setShearX(x);
		}
		else if (!strcmp("shear_y", keyword))
		{
			sscanf(valuestr, "%g", &y);
			setShearY(y);
		}
		else if (!strcmp("twist",keyword))
		{
			sscanf(valuestr,"%g",&tempF32);
			setTwist(tempF32);
		}
		else if (!strcmp("twist_begin", keyword))
		{
			sscanf(valuestr, "%g", &y);
			setTwistBegin(y);
		}
		else if (!strcmp("radius_offset", keyword))
		{
			sscanf(valuestr, "%g", &y);
			setRadiusOffset(y);
		}
		else if (!strcmp("taper_x", keyword))
		{
			sscanf(valuestr, "%g", &y);
			setTaperX(y);
		}
		else if (!strcmp("taper_y", keyword))
		{
			sscanf(valuestr, "%g", &y);
			setTaperY(y);
		}
		else if (!strcmp("revolutions", keyword))
		{
			sscanf(valuestr, "%g", &y);
			setRevolutions(y);
		}
		else if (!strcmp("skew", keyword))
		{
			sscanf(valuestr, "%g", &y);
			setSkew(y);
		}
		else
		{
			llwarns << "unknown keyword " << " in path import" << llendl;
		}
	}
	return TRUE;
}


BOOL LLPathParams::exportLegacyStream(std::ostream& output_stream) const
{
	output_stream << "\t\tpath 0\n";
	output_stream << "\t\t{\n";
	output_stream << "\t\t\tcurve\t" << (S32) getCurveType() << "\n";
	output_stream << "\t\t\tbegin\t" << getBegin() << "\n";
	output_stream << "\t\t\tend\t" << getEnd() << "\n";
	output_stream << "\t\t\tscale_x\t" << getScaleX()  << "\n";
	output_stream << "\t\t\tscale_y\t" << getScaleY()  << "\n";
	output_stream << "\t\t\tshear_x\t" << getShearX()  << "\n";
	output_stream << "\t\t\tshear_y\t" << getShearY()  << "\n";
	output_stream <<"\t\t\ttwist\t" << getTwist() << "\n";
	
	output_stream <<"\t\t\ttwist_begin\t" << getTwistBegin() << "\n";
	output_stream <<"\t\t\tradius_offset\t" << getRadiusOffset() << "\n";
	output_stream <<"\t\t\ttaper_x\t" << getTaperX() << "\n";
	output_stream <<"\t\t\ttaper_y\t" << getTaperY() << "\n";
	output_stream <<"\t\t\trevolutions\t" << getRevolutions() << "\n";
	output_stream <<"\t\t\tskew\t" << getSkew() << "\n";

	output_stream << "\t\t}\n";
	return TRUE;
}

LLSD LLPathParams::asLLSD() const
{
	LLSD sd = LLSD();
	sd["curve"] = getCurveType();
	sd["begin"] = getBegin();
	sd["end"] = getEnd();
	sd["scale_x"] = getScaleX();
	sd["scale_y"] = getScaleY();
	sd["shear_x"] = getShearX();
	sd["shear_y"] = getShearY();
	sd["twist"] = getTwist();
	sd["twist_begin"] = getTwistBegin();
	sd["radius_offset"] = getRadiusOffset();
	sd["taper_x"] = getTaperX();
	sd["taper_y"] = getTaperY();
	sd["revolutions"] = getRevolutions();
	sd["skew"] = getSkew();

	return sd;
}

bool LLPathParams::fromLLSD(LLSD& sd)
{
	setCurveType(sd["curve"].asInteger());
	setBegin((F32)sd["begin"].asReal());
	setEnd((F32)sd["end"].asReal());
	setScaleX((F32)sd["scale_x"].asReal());
	setScaleY((F32)sd["scale_y"].asReal());
	setShearX((F32)sd["shear_x"].asReal());
	setShearY((F32)sd["shear_y"].asReal());
	setTwist((F32)sd["twist"].asReal());
	setTwistBegin((F32)sd["twist_begin"].asReal());
	setRadiusOffset((F32)sd["radius_offset"].asReal());
	setTaperX((F32)sd["taper_x"].asReal());
	setTaperY((F32)sd["taper_y"].asReal());
	setRevolutions((F32)sd["revolutions"].asReal());
	setSkew((F32)sd["skew"].asReal());
	return true;
}

void LLPathParams::copyParams(const LLPathParams &params)
{
	setCurveType(params.getCurveType());
	setBegin(params.getBegin());
	setEnd(params.getEnd());
	setScale(params.getScaleX(), params.getScaleY() );
	setShear(params.getShearX(), params.getShearY() );
	setTwist(params.getTwist());
	setTwistBegin(params.getTwistBegin());
	setRadiusOffset(params.getRadiusOffset());
	setTaper( params.getTaperX(), params.getTaperY() );
	setRevolutions(params.getRevolutions());
	setSkew(params.getSkew());
}

LLProfile::~LLProfile()
{
	
}


S32 LLVolume::sNumMeshPoints = 0;

LLVolume::LLVolume(const LLVolumeParams &params, const F32 detail, const BOOL generate_single_face, const BOOL is_unique) : mParams(params)
{
	mUnique = is_unique;
	mFaceMask = 0x0;
	mDetail = detail;
	mSculptLevel = -2;
	
	// set defaults
	if (mParams.getPathParams().getCurveType() == LL_PCODE_PATH_FLEXIBLE)
	{
		mPathp = new LLDynamicPath(mParams.getPathParams());
	}
	else
	{
		mPathp    = new LLPath(mParams.getPathParams());
	}
	mProfilep = new LLProfile(mParams.getProfileParams());

	mNumVolumeFaces = 0;
	mVolumeFaces = NULL;
	mGenerateSingleFace = generate_single_face;

	generate();
	if (mParams.getSculptID().isNull())
	{
		createVolumeFaces();
	}
}

void LLVolume::regen()
{
	generate();
	createVolumeFaces();
}

LLVolume::~LLVolume()
{
	sNumMeshPoints -= mMesh.size();
	delete mPathp;
	delete mProfilep;
	delete[] mVolumeFaces;

	mPathp = NULL;
	mProfilep = NULL;
	mVolumeFaces = NULL;
}

BOOL LLVolume::generate()
{
	//Added 10.03.05 Dave Parks
	// Split is a parameter to LLProfile::generate that tesselates edges on the profile 
	// to prevent lighting and texture interpolation errors on triangles that are 
	// stretched due to twisting or scaling on the path.  
	S32 split = (S32) ((mDetail)*0.66f);
	
	if (mPathp->mParams.getCurveType() == LL_PCODE_PATH_LINE &&
		(mPathp->mParams.getScale().mV[0] != 1.0f ||
		 mPathp->mParams.getScale().mV[1] != 1.0f) &&
		(mProfilep->mParams.getCurveType() == LL_PCODE_PROFILE_SQUARE ||
		 mProfilep->mParams.getCurveType() == LL_PCODE_PROFILE_ISOTRI ||
		 mProfilep->mParams.getCurveType() == LL_PCODE_PROFILE_EQUALTRI ||
		 mProfilep->mParams.getCurveType() == LL_PCODE_PROFILE_RIGHTTRI))
	{
		split = 0;
	}
		 
	mLODScaleBias.setVec(0.5f, 0.5f, 0.5f);
	
	F32 profile_detail = mDetail;
	F32 path_detail = mDetail;
	
	U8 path_type = mPathp->mParams.getCurveType();
	U8 profile_type = mProfilep->mParams.getCurveType();
	
	if (path_type == LL_PCODE_PATH_LINE && profile_type == LL_PCODE_PROFILE_CIRCLE)
	{ //cylinders don't care about Z-Axis
		mLODScaleBias.setVec(0.6f, 0.6f, 0.0f);
	}
	else if (path_type == LL_PCODE_PATH_CIRCLE) 
	{	
		mLODScaleBias.setVec(0.6f, 0.6f, 0.6f);
	}
	
	BOOL regenPath = mPathp->generate(path_detail, split);
	BOOL regenProf = mProfilep->generate(mPathp->isOpen(),profile_detail, split);

	if (regenPath || regenProf ) 
	{
		sNumMeshPoints -= mMesh.size();
		mMesh.resize(mProfilep->mProfile.size() * mPathp->mPath.size());
		sNumMeshPoints += mMesh.size();

		S32 s = 0, t=0;
		S32 sizeS = mPathp->mPath.size();
		S32 sizeT = mProfilep->mProfile.size();
		S32 line  = 0;

		//generate vertex positions

		// Run along the path.
		while (s < sizeS)
		{
			LLVector2  scale = mPathp->mPath[s].mScale;
			LLQuaternion rot = mPathp->mPath[s].mRot;

			t = 0;
			// Run along the profile.
			while (t < sizeT)
			{
				S32 i = t + line;
				Point& pt = mMesh[i];
				
				pt.mPos.mV[0] = mProfilep->mProfile[t].mV[0] * scale.mV[0];
				pt.mPos.mV[1] = mProfilep->mProfile[t].mV[1] * scale.mV[1];
				pt.mPos.mV[2] = 0.0f;
				pt.mPos       = pt.mPos * rot;
				pt.mPos      += mPathp->mPath[s].mPos;
				t++;
			}
			line += sizeT;
			s++;
		}

		for (S32 i = 0; i < (S32)mProfilep->mFaces.size(); i++)
		{
			mFaceMask |= mProfilep->mFaces[i].mFaceID;
		}
		return TRUE;
	}
	return FALSE;
}


void LLVolume::createVolumeFaces()
{
	S32 i;

	if (mVolumeFaces != NULL)
	{
		delete[] mVolumeFaces;
		mVolumeFaces = NULL;
	}

	if (mGenerateSingleFace)
	{
		mNumVolumeFaces = 0;
	}
	else
	{
		S32 num_faces = getNumFaces();
		mNumVolumeFaces = num_faces;
		mVolumeFaces = new LLVolumeFace[num_faces];
		// Initialize volume faces with parameter data
		for (i = 0; i < num_faces; i++)
		{
			LLVolumeFace &vf = mVolumeFaces[i];
			LLProfile::Face &face = mProfilep->mFaces[i];
			vf.mVolumep = this;
			vf.mBeginS = face.mIndex;
			vf.mNumS = face.mCount;
			vf.mBeginT = 0;
			vf.mNumT= getPath().mPath.size();
			vf.mID = i;

			// Set the type mask bits correctly
			if (mProfilep->isHollow())
			{
				vf.mTypeMask |= LLVolumeFace::HOLLOW_MASK;
			}
			if (mProfilep->isOpen())
			{
				vf.mTypeMask |= LLVolumeFace::OPEN_MASK;
			}
			if (face.mCap)
			{
				vf.mTypeMask |= LLVolumeFace::CAP_MASK;
				if (face.mFaceID == LL_FACE_PATH_BEGIN)
				{
					vf.mTypeMask |= LLVolumeFace::TOP_MASK;
				}
				else
				{
					llassert(face.mFaceID == LL_FACE_PATH_END);
					vf.mTypeMask |= LLVolumeFace::BOTTOM_MASK;
				}
			}
			else if (face.mFaceID & (LL_FACE_PROFILE_BEGIN | LL_FACE_PROFILE_END))
			{
				vf.mTypeMask |= LLVolumeFace::FLAT_MASK | LLVolumeFace::END_MASK;
			}
			else
			{
				vf.mTypeMask |= LLVolumeFace::SIDE_MASK;
				if (face.mFlat)
				{
					vf.mTypeMask |= LLVolumeFace::FLAT_MASK;
				}
				if (face.mFaceID & LL_FACE_INNER_SIDE)
				{
					vf.mTypeMask |= LLVolumeFace::INNER_MASK;
					if (face.mFlat && vf.mNumS > 2)
					{ //flat inner faces have to copy vert normals
						vf.mNumS = vf.mNumS*2;
					}
				}
				else
				{
					vf.mTypeMask |= LLVolumeFace::OUTER_MASK;
				}
			}
		}

		for (i = 0; i < mNumVolumeFaces; i++)
		{
			mVolumeFaces[i].create();
		}
	}
}


// sculpt replaces generate() for sculpted surfaces
void LLVolume::sculpt(U16 sculpt_width, U16 sculpt_height, S8 sculpt_components, const U8* sculpt_data, S32 sculpt_level)
{
	BOOL data_is_empty = FALSE;

	if (sculpt_width == 0 || sculpt_height == 0 || sculpt_data == NULL)
	{
		sculpt_level = -1;
		data_is_empty = TRUE;
	}

	mPathp->generate(mDetail, 0, TRUE);
	mProfilep->generate(mPathp->isOpen(), mDetail, 0, TRUE);

	
	S32 sizeS = mPathp->mPath.size();
	S32 sizeT = mProfilep->mProfile.size();

	sNumMeshPoints -= mMesh.size();
	mMesh.resize(sizeS * sizeT);
	sNumMeshPoints += mMesh.size();

	S32 vertex_change = 0;
	// first test to see if image has enough variation to create geometry
	if (!data_is_empty)
	{
		S32 last_index = 0;
		for (S32 s = 0; s < sizeS; s++)
			for (S32 t = 0; t < sizeT; t++)
			{
				U32 x = (U32) ((F32)s/(sizeS-1) * (F32) sculpt_width);
				U32 y = (U32) ((F32)t/(sizeT-1) * (F32) sculpt_height);

				if (y == sculpt_height)  // stitch bottom
				{
					y = sculpt_height - 1;
					x = sculpt_width / 2;
				}

				if (x == sculpt_width)   // stitch sides
					x = 0;

				if (y == 0)  // stitch top
					x = sculpt_width / 2;

				U32 index = (x + y * sculpt_width) * sculpt_components;

				if (fabs((F32)(sculpt_data[index] - sculpt_data[last_index])) +
					fabs((F32)(sculpt_data[index+1] - sculpt_data[last_index+1])) +
					fabs((F32)(sculpt_data[index+2] - sculpt_data[last_index+2])) > 256 * 0.02)
					vertex_change++;

				last_index = index;
			}
		if ((F32)vertex_change / sizeS / sizeT < 0.05) // less than 5%
			data_is_empty = TRUE;
	}

	//generate vertex positions
	if (data_is_empty) // if empty, make a sphere
	{
		S32 line = 0;

		for (S32 s = 0; s < sizeS; s++)
		{
			for (S32 t = 0; t < sizeT; t++)
			{
				S32 i = t + line;
				Point& pt = mMesh[i];

			
				F32 u = (F32)s/(sizeS-1);
				F32 v = (F32)t/(sizeT-1);

				const F32 RADIUS = (F32) 0.3;
					
				pt.mPos.mV[0] = (F32)(sin(F_PI * v) * cos(2.0 * F_PI * u) * RADIUS);
				pt.mPos.mV[1] = (F32)(sin(F_PI * v) * sin(2.0 * F_PI * u) * RADIUS);
				pt.mPos.mV[2] = (F32)(cos(F_PI * v) * RADIUS);

			}
			line += sizeT;
		}
	}
	else
	{
		S32 line = 0;
		for (S32 s = 0; s < sizeS; s++)
		{
			// Run along the profile.
			for (S32 t = 0; t < sizeT; t++)
			{
				S32 i = t + line;
				Point& pt = mMesh[i];

				U32 x = (U32) ((F32)t/(sizeT-1) * (F32) sculpt_width);
				U32 y = (U32) ((F32)s/(sizeS-1) * (F32) sculpt_height);

				if (y == sculpt_height)  // stitch bottom row
				{
					y = sculpt_height - 1;
					x = sculpt_width / 2;
				}

				if (x == sculpt_width)   // stitch sides
					x = 0;

				if (y == 0)  // stitch top row
					x = sculpt_width / 2;
			
				U32 index = (x + y * sculpt_width) * sculpt_components;
				pt.mPos.mV[0] = sculpt_data[index  ] / 256.f - 0.5f;
				pt.mPos.mV[1] = sculpt_data[index+1] / 256.f - 0.5f;
				pt.mPos.mV[2] = sculpt_data[index+2] / 256.f - 0.5f;
			}
			line += sizeT;
		}
	}

	for (S32 i = 0; i < (S32)mProfilep->mFaces.size(); i++)
	{
		mFaceMask |= mProfilep->mFaces[i].mFaceID;
	}

	mSculptLevel = sculpt_level;
	createVolumeFaces();
}




BOOL LLVolume::isCap(S32 face)
{
	return mProfilep->mFaces[face].mCap; 
}

BOOL LLVolume::isFlat(S32 face)
{
	return mProfilep->mFaces[face].mFlat;
}


bool LLVolumeParams::operator==(const LLVolumeParams &params) const
{
	return ( (getPathParams() == params.getPathParams()) &&
			 (getProfileParams() == params.getProfileParams()) &&
			 (mSculptID == params.mSculptID) &&
			 (mSculptType == params.mSculptType) );
}

bool LLVolumeParams::operator!=(const LLVolumeParams &params) const
{
	return ( (getPathParams() != params.getPathParams()) ||
			 (getProfileParams() != params.getProfileParams()) ||
			 (mSculptID != params.mSculptID) ||
			 (mSculptType != params.mSculptType) );
}

bool LLVolumeParams::operator<(const LLVolumeParams &params) const
{
	if( getPathParams() != params.getPathParams() )
	{
		return getPathParams() < params.getPathParams();
	}
	
	if (getProfileParams() != params.getProfileParams())
	{
		return getProfileParams() < params.getProfileParams();
	}
	
	if (mSculptID != params.mSculptID)
	{
		return mSculptID < params.mSculptID;
	}


	return mSculptType < params.mSculptType;


}

void LLVolumeParams::copyParams(const LLVolumeParams &params)
{
	mProfileParams.copyParams(params.mProfileParams);
	mPathParams.copyParams(params.mPathParams);
	mSculptID = params.getSculptID();
	mSculptType = params.getSculptType();
}

// Less restricitve approx 0 for volumes
const F32 APPROXIMATELY_ZERO = 0.001f;
bool approx_zero( F32 f, F32 tolerance = APPROXIMATELY_ZERO)
{
	return (f >= -tolerance) && (f <= tolerance);
}

// return true if in range (or nearly so)
static bool limit_range(F32& v, F32 min, F32 max, F32 tolerance = APPROXIMATELY_ZERO)
{
	F32 min_delta = v - min;
	if (min_delta < 0.f)
	{
		v = min;
		if (!approx_zero(min_delta, tolerance))
			return false;
	}
	F32 max_delta = max - v;
	if (max_delta < 0.f)
	{
		v = max;
		if (!approx_zero(max_delta, tolerance))
			return false;
	}
	return true;
}

bool LLVolumeParams::setBeginAndEndS(const F32 b, const F32 e)
{
	bool valid = true;

	// First, clamp to valid ranges.
	F32 begin = b;
	valid &= limit_range(begin, 0.f, 1.f - MIN_CUT_DELTA);

	F32 end = e;
	if (end >= .0149f && end < MIN_CUT_DELTA) end = MIN_CUT_DELTA; // eliminate warning for common rounding error
	valid &= limit_range(end, MIN_CUT_DELTA, 1.f);

	valid &= limit_range(begin, 0.f, end - MIN_CUT_DELTA, .01f);

	// Now set them.
	mProfileParams.setBegin(begin);
	mProfileParams.setEnd(end);

	return valid;
}

bool LLVolumeParams::setBeginAndEndT(const F32 b, const F32 e)
{
	bool valid = true;

	// First, clamp to valid ranges.
	F32 begin = b;
	valid &= limit_range(begin, 0.f, 1.f - MIN_CUT_DELTA);

	F32 end = e;
	valid &= limit_range(end, MIN_CUT_DELTA, 1.f);

	valid &= limit_range(begin, 0.f, end - MIN_CUT_DELTA, .01f);

	// Now set them.
	mPathParams.setBegin(begin);
	mPathParams.setEnd(end);

	return valid;
}			

bool LLVolumeParams::setHollow(const F32 h)
{
	// Validate the hollow based on path and profile.
	U8 profile 	= mProfileParams.getCurveType() & LL_PCODE_PROFILE_MASK;
	U8 hole_type 	= mProfileParams.getCurveType() & LL_PCODE_HOLE_MASK;
	
	F32 max_hollow = HOLLOW_MAX;

	// Only square holes have trouble.
	if (LL_PCODE_HOLE_SQUARE == hole_type)
	{
		switch(profile)
		{
		case LL_PCODE_PROFILE_CIRCLE:
		case LL_PCODE_PROFILE_CIRCLE_HALF:
		case LL_PCODE_PROFILE_EQUALTRI:
			max_hollow = HOLLOW_MAX_SQUARE;
		}
	}

	F32 hollow = h;
	bool valid = limit_range(hollow, HOLLOW_MIN, max_hollow);
	mProfileParams.setHollow(hollow); 

	return valid;
}	

bool LLVolumeParams::setTwistBegin(const F32 b)
{
	F32 twist_begin = b;
	bool valid = limit_range(twist_begin, TWIST_MIN, TWIST_MAX);
	mPathParams.setTwistBegin(twist_begin);
	return valid;
}

bool LLVolumeParams::setTwistEnd(const F32 e)
{	
	F32 twist_end = e;
	bool valid = limit_range(twist_end, TWIST_MIN, TWIST_MAX);
	mPathParams.setTwistEnd(twist_end);
	return valid;
}

bool LLVolumeParams::setRatio(const F32 x, const F32 y)
{
	F32 min_x = RATIO_MIN;
	F32 max_x = RATIO_MAX;
	F32 min_y = RATIO_MIN;
	F32 max_y = RATIO_MAX;
	// If this is a circular path (and not a sphere) then 'ratio' is actually hole size.
	U8 path_type 	= mPathParams.getCurveType();
	U8 profile_type = mProfileParams.getCurveType() & LL_PCODE_PROFILE_MASK;
	if ( LL_PCODE_PATH_CIRCLE == path_type &&
		 LL_PCODE_PROFILE_CIRCLE_HALF != profile_type)
	{
		// Holes are more restricted...
		min_x = HOLE_X_MIN;
		max_x = HOLE_X_MAX;
		min_y = HOLE_Y_MIN;
		max_y = HOLE_Y_MAX;
	}

	F32 ratio_x = x;
	bool valid = limit_range(ratio_x, min_x, max_x);
	F32 ratio_y = y;
	valid &= limit_range(ratio_y, min_y, max_y);

	mPathParams.setScale(ratio_x, ratio_y);

	return valid;
}

bool LLVolumeParams::setShear(const F32 x, const F32 y)
{
	F32 shear_x = x;
	bool valid = limit_range(shear_x, SHEAR_MIN, SHEAR_MAX);
	F32 shear_y = y;
	valid &= limit_range(shear_y, SHEAR_MIN, SHEAR_MAX);
	mPathParams.setShear(shear_x, shear_y);
	return valid;
}

bool LLVolumeParams::setTaperX(const F32 v)
{
	F32 taper = v;
	bool valid = limit_range(taper, TAPER_MIN, TAPER_MAX);
	mPathParams.setTaperX(taper);
	return valid;
}

bool LLVolumeParams::setTaperY(const F32 v)
{
	F32 taper = v;
	bool valid = limit_range(taper, TAPER_MIN, TAPER_MAX);
	mPathParams.setTaperY(taper);
	return valid;
}

bool LLVolumeParams::setRevolutions(const F32 r)
{
	F32 revolutions = r;
	bool valid = limit_range(revolutions, REV_MIN, REV_MAX);
	mPathParams.setRevolutions(revolutions);
	return valid;
}

bool LLVolumeParams::setRadiusOffset(const F32 offset)
{
	bool valid = true;

	// If this is a sphere, just set it to 0 and get out.
	U8 path_type 	= mPathParams.getCurveType();
	U8 profile_type = mProfileParams.getCurveType() & LL_PCODE_PROFILE_MASK;
	if ( LL_PCODE_PROFILE_CIRCLE_HALF == profile_type ||
		LL_PCODE_PATH_CIRCLE != path_type )
	{
		mPathParams.setRadiusOffset(0.f);
		return true;
	}

	// Limit radius offset, based on taper and hole size y.
	F32 radius_offset	= offset;
	F32 taper_y    		= getTaperY();
	F32 radius_mag		= fabs(radius_offset);
	F32 hole_y_mag 		= fabs(getRatioY());
	F32 taper_y_mag		= fabs(taper_y);
	// Check to see if the taper effects us.
	if ( (radius_offset > 0.f && taper_y < 0.f) ||
			(radius_offset < 0.f && taper_y > 0.f) )
	{
		// The taper does not help increase the radius offset range.
		taper_y_mag = 0.f;
	}
	F32 max_radius_mag = 1.f - hole_y_mag * (1.f - taper_y_mag) / (1.f - hole_y_mag);

	// Enforce the maximum magnitude.
	F32 delta = max_radius_mag - radius_mag;
	if (delta < 0.f)
	{
		// Check radius offset sign.
		if (radius_offset < 0.f)
		{
			radius_offset = -max_radius_mag;
		}
		else
		{
			radius_offset = max_radius_mag;
		}
		valid = approx_zero(delta, .1f);
	}

	mPathParams.setRadiusOffset(radius_offset);
	return valid;
}

bool LLVolumeParams::setSkew(const F32 skew_value)
{
	bool valid = true;

	// Check the skew value against the revolutions.
	F32 skew		= llclamp(skew_value, SKEW_MIN, SKEW_MAX);
	F32 skew_mag	= fabs(skew);
	F32 revolutions = getRevolutions();
	F32 scale_x		= getRatioX();
	F32 min_skew_mag = 1.0f - 1.0f / (revolutions * scale_x + 1.0f);
	// Discontinuity; A revolution of 1 allows skews below 0.5.
	if ( fabs(revolutions - 1.0f) < 0.001)
		min_skew_mag = 0.0f;

	// Clip skew.
	F32 delta = skew_mag - min_skew_mag;
	if (delta < 0.f)
	{
		// Check skew sign.
		if (skew < 0.0f)
		{
			skew = -min_skew_mag;
		}
		else 
		{
			skew = min_skew_mag;
		}
		valid = approx_zero(delta, .01f);
	}

	mPathParams.setSkew(skew);
	return valid;
}

bool LLVolumeParams::setSculptID(const LLUUID sculpt_id, U8 sculpt_type)
{
	mSculptID = sculpt_id;
	mSculptType = sculpt_type;
	return true;
}

bool LLVolumeParams::setType(U8 profile, U8 path)
{
	bool result = true;
	// First, check profile and path for validity.
	U8 profile_type	= profile & LL_PCODE_PROFILE_MASK;
	U8 hole_type 	= (profile & LL_PCODE_HOLE_MASK) >> 4;
	U8 path_type	= path >> 4;

	if (profile_type > LL_PCODE_PROFILE_MAX)
	{
		// Bad profile.  Make it square.
		profile = LL_PCODE_PROFILE_SQUARE;
		result = false;
		llwarns << "LLVolumeParams::setType changing bad profile type (" << profile_type
			 	<< ") to be LL_PCODE_PROFILE_SQUARE" << llendl;
	}
	else if (hole_type > LL_PCODE_HOLE_MAX)
	{
		// Bad hole.  Make it the same.
		profile = profile_type;
		result = false;
		llwarns << "LLVolumeParams::setType changing bad hole type (" << hole_type
			 	<< ") to be LL_PCODE_HOLE_SAME" << llendl;
	}

	if (path_type < LL_PCODE_PATH_MIN ||
		path_type > LL_PCODE_PATH_MAX)
	{
		// Bad path.  Make it linear.
		result = false;
		llwarns << "LLVolumeParams::setType changing bad path (" << path
			 	<< ") to be LL_PCODE_PATH_LINE" << llendl;
		path = LL_PCODE_PATH_LINE;
	}

	mProfileParams.setCurveType(profile);
	mPathParams.setCurveType(path);
	return result;
}

// static 
bool LLVolumeParams::validate(U8 prof_curve, F32 prof_begin, F32 prof_end, F32 hollow,
		U8 path_curve, F32 path_begin, F32 path_end,
		F32 scx, F32 scy, F32 shx, F32 shy,
		F32 twistend, F32 twistbegin, F32 radiusoffset,
		F32 tx, F32 ty, F32 revolutions, F32 skew)
{
	LLVolumeParams test_params;
	if (!test_params.setType		(prof_curve, path_curve))
	{
	    	return false;
	}
	if (!test_params.setBeginAndEndS	(prof_begin, prof_end))
	{
	    	return false;
	}
	if (!test_params.setBeginAndEndT	(path_begin, path_end))
	{
	    	return false;
	}
	if (!test_params.setHollow		(hollow))
	{
	    	return false;
	}
	if (!test_params.setTwistBegin		(twistbegin))
	{
	    	return false;
	}
	if (!test_params.setTwistEnd		(twistend))
	{
	    	return false;
	}
	if (!test_params.setRatio		(scx, scy))
	{
	    	return false;
	}
	if (!test_params.setShear		(shx, shy))
	{
	    	return false;
	}
	if (!test_params.setTaper		(tx, ty))
	{
	    	return false;
	}
	if (!test_params.setRevolutions		(revolutions))
	{
	    	return false;
	}
	if (!test_params.setRadiusOffset	(radiusoffset))
	{
	    	return false;
	}
	if (!test_params.setSkew		(skew))
	{
	    	return false;
	}
	return true;
}

#define MAX_INDEX 10000
S32 *LLVolume::getTriangleIndices(U32 &num_indices) const
{
	S32 index[MAX_INDEX];
	S32 count = 0;
	S32 *indices = NULL;

	// Let's do this totally diffently, as we don't care about faces...
	// Counter-clockwise triangles are forward facing...

	BOOL open = getProfile().isOpen();
	BOOL hollow = getProfile().isHollow();
	BOOL path_open = getPath().isOpen();
	S32 size_s, size_s_out, size_t;
	S32 s, t, i;
	size_s = getProfile().getTotal();
	size_s_out = getProfile().getTotalOut();
	size_t = getPath().mPath.size();

	if (open)		/* Flawfinder: ignore */
	{
		if (hollow)
		{
			// Open hollow -- much like the closed solid, except we 
			// we need to stitch up the gap between s=0 and s=size_s-1

			if ( (size_t - 1) * (((size_s -1) * 6) + 6) >= MAX_INDEX)
				goto noindices;

			for (t = 0; t < size_t - 1; t++)
			{
				// The outer face, first cut, and inner face
				for (s = 0; s < size_s - 1; s++)
				{
					i  = s + t*size_s;
					index[count++]  = i;				// x,y
					index[count++]  = i + 1;			// x+1,y
					index[count++]  = i + size_s;		// x,y+1
	
					index[count++]  = i + size_s;		// x,y+1
					index[count++]  = i + 1;			// x+1,y
					index[count++]  = i + size_s + 1;	// x+1,y+1
				}

				// The other cut face
				index[count++]  = s + t*size_s;		// x,y
				index[count++]  = 0 + t*size_s;		// x+1,y
				index[count++]  = s + (t+1)*size_s;	// x,y+1
	
				index[count++]  = s + (t+1)*size_s;	// x,y+1
				index[count++]  = 0 + t*size_s;		// x+1,y
				index[count++]  = 0 + (t+1)*size_s;	// x+1,y+1
			}

			// Do the top and bottom caps, if necessary
			if (path_open)
			{
				// Top cap
				S32 pt1 = 0;
				S32 pt2 = size_s-1;
				S32 i   = (size_t - 1)*size_s;

				while (pt2 - pt1 > 1)
				{
					// Use the profile points instead of the mesh, since you want
					// the un-transformed profile distances.
					LLVector3 p1 = getProfile().mProfile[pt1];
					LLVector3 p2 = getProfile().mProfile[pt2];
					LLVector3 pa = getProfile().mProfile[pt1+1];
					LLVector3 pb = getProfile().mProfile[pt2-1];

					p1.mV[VZ] = 0.f;
					p2.mV[VZ] = 0.f;
					pa.mV[VZ] = 0.f;
					pb.mV[VZ] = 0.f;

					// Use area of triangle to determine backfacing
					F32 area_1a2, area_1ba, area_21b, area_2ab;
					area_1a2 =  (p1.mV[0]*pa.mV[1] - pa.mV[0]*p1.mV[1]) +
								(pa.mV[0]*p2.mV[1] - p2.mV[0]*pa.mV[1]) +
								(p2.mV[0]*p1.mV[1] - p1.mV[0]*p2.mV[1]);

					area_1ba =  (p1.mV[0]*pb.mV[1] - pb.mV[0]*p1.mV[1]) +
								(pb.mV[0]*pa.mV[1] - pa.mV[0]*pb.mV[1]) +
								(pa.mV[0]*p1.mV[1] - p1.mV[0]*pa.mV[1]);

					area_21b =  (p2.mV[0]*p1.mV[1] - p1.mV[0]*p2.mV[1]) +
								(p1.mV[0]*pb.mV[1] - pb.mV[0]*p1.mV[1]) +
								(pb.mV[0]*p2.mV[1] - p2.mV[0]*pb.mV[1]);

					area_2ab =  (p2.mV[0]*pa.mV[1] - pa.mV[0]*p2.mV[1]) +
								(pa.mV[0]*pb.mV[1] - pb.mV[0]*pa.mV[1]) +
								(pb.mV[0]*p2.mV[1] - p2.mV[0]*pb.mV[1]);

					BOOL use_tri1a2 = TRUE;
					BOOL tri_1a2 = TRUE;
					BOOL tri_21b = TRUE;

					if (area_1a2 < 0)
					{
						tri_1a2 = FALSE;
					}
					if (area_2ab < 0)
					{
						// Can't use, because it contains point b
						tri_1a2 = FALSE;
					}
					if (area_21b < 0)
					{
						tri_21b = FALSE;
					}
					if (area_1ba < 0)
					{
						// Can't use, because it contains point b
						tri_21b = FALSE;
					}

					if (!tri_1a2)
					{
						use_tri1a2 = FALSE;
					}
					else if (!tri_21b)
					{
						use_tri1a2 = TRUE;
					}
					else
					{
						LLVector3 d1 = p1 - pa;
						LLVector3 d2 = p2 - pb;

						if (d1.magVecSquared() < d2.magVecSquared())
						{
							use_tri1a2 = TRUE;
						}
						else
						{
							use_tri1a2 = FALSE;
						}
					}

					if (use_tri1a2)
					{
						if (count + 3 >= MAX_INDEX)
							goto noindices;
						index[count++] = pt1 + i;
						index[count++] = pt1 + 1 + i;
						index[count++] = pt2 + i;
						pt1++;
					}
					else
					{
						if (count + 3 >= MAX_INDEX)
							goto noindices;
						index[count++] = pt1 + i;
						index[count++] = pt2 - 1 + i;
						index[count++] = pt2 + i;
						pt2--;
					}
				}

				// Bottom cap
				pt1          = 0;
				pt2          = size_s-1;
				while (pt2 - pt1 > 1)
				{
					// Use the profile points instead of the mesh, since you want
					// the un-transformed profile distances.
					LLVector3 p1 = getProfile().mProfile[pt1];
					LLVector3 p2 = getProfile().mProfile[pt2];
					LLVector3 pa = getProfile().mProfile[pt1+1];
					LLVector3 pb = getProfile().mProfile[pt2-1];

					p1.mV[VZ] = 0.f;
					p2.mV[VZ] = 0.f;
					pa.mV[VZ] = 0.f;
					pb.mV[VZ] = 0.f;

					// Use area of triangle to determine backfacing
					F32 area_1a2, area_1ba, area_21b, area_2ab;
					area_1a2 =  (p1.mV[0]*pa.mV[1] - pa.mV[0]*p1.mV[1]) +
								(pa.mV[0]*p2.mV[1] - p2.mV[0]*pa.mV[1]) +
								(p2.mV[0]*p1.mV[1] - p1.mV[0]*p2.mV[1]);

					area_1ba =  (p1.mV[0]*pb.mV[1] - pb.mV[0]*p1.mV[1]) +
								(pb.mV[0]*pa.mV[1] - pa.mV[0]*pb.mV[1]) +
								(pa.mV[0]*p1.mV[1] - p1.mV[0]*pa.mV[1]);

					area_21b =  (p2.mV[0]*p1.mV[1] - p1.mV[0]*p2.mV[1]) +
								(p1.mV[0]*pb.mV[1] - pb.mV[0]*p1.mV[1]) +
								(pb.mV[0]*p2.mV[1] - p2.mV[0]*pb.mV[1]);

					area_2ab =  (p2.mV[0]*pa.mV[1] - pa.mV[0]*p2.mV[1]) +
								(pa.mV[0]*pb.mV[1] - pb.mV[0]*pa.mV[1]) +
								(pb.mV[0]*p2.mV[1] - p2.mV[0]*pb.mV[1]);

					BOOL use_tri1a2 = TRUE;
					BOOL tri_1a2 = TRUE;
					BOOL tri_21b = TRUE;

					if (area_1a2 < 0)
					{
						tri_1a2 = FALSE;
					}
					if (area_2ab < 0)
					{
						// Can't use, because it contains point b
						tri_1a2 = FALSE;
					}
					if (area_21b < 0)
					{
						tri_21b = FALSE;
					}
					if (area_1ba < 0)
					{
						// Can't use, because it contains point b
						tri_21b = FALSE;
					}

					if (!tri_1a2)
					{
						use_tri1a2 = FALSE;
					}
					else if (!tri_21b)
					{
						use_tri1a2 = TRUE;
					}
					else
					{
						LLVector3 d1 = p1 - pa;
						LLVector3 d2 = p2 - pb;

						if (d1.magVecSquared() < d2.magVecSquared())
						{
							use_tri1a2 = TRUE;
						}
						else
						{
							use_tri1a2 = FALSE;
						}
					}

					if (use_tri1a2)
					{
						if (count + 3 >= MAX_INDEX)
							goto noindices;
						index[count++] = pt1;
						index[count++] = pt2;
						index[count++] = pt1 + 1;
						pt1++;
					}
					else
					{
						if (count + 3 >= MAX_INDEX)
							goto noindices;
						index[count++] = pt1;
						index[count++] = pt2;
						index[count++] = pt2 - 1;
						pt2--;
					}
				}
			}
		}
		else
		{
			// Open solid

			if ( (size_t - 1) * (((size_s -1) * 6) + 6) >= MAX_INDEX)
				goto noindices;

			for (t = 0; t < size_t - 1; t++)
			{
				// Outer face + 1 cut face
				for (s = 0; s < size_s - 1; s++)
				{
					i  = s + t*size_s;

					index[count++]  = i;				// x,y
					index[count++]  = i + 1;			// x+1,y
					index[count++]  = i + size_s;		// x,y+1

					index[count++]  = i + size_s;		// x,y+1
					index[count++]  = i + 1;			// x+1,y
					index[count++]  = i + size_s + 1;	// x+1,y+1
				}

				// The other cut face
				index[count++] = (size_s - 1) + (t*size_s);		// x,y
				index[count++] = 0 + t*size_s;					// x+1,y
				index[count++] = (size_s - 1) + (t+1)*size_s;	// x,y+1

				index[count++] = (size_s - 1) + (t+1)*size_s;	// x,y+1
				index[count++] = 0 + (t*size_s);				// x+1,y
				index[count++] = 0 + (t+1)*size_s;				// x+1,y+1
			}

			// Do the top and bottom caps, if necessary
			if (path_open)
			{
				if ( count + (size_s - 2) * 3 >= MAX_INDEX)
					goto noindices;
				for (s = 0; s < size_s - 2; s++)
				{
					index[count++] = s+1;
					index[count++] = s;
					index[count++] = size_s - 1;
				}

				// We've got a top cap
				S32 offset = (size_t - 1)*size_s;
				if ( count + (size_s - 2) * 3 >= MAX_INDEX)
					goto noindices;
				for (s = 0; s < size_s - 2; s++)
				{
					// Inverted ordering from bottom cap.
					index[count++] = offset + size_s - 1;
					index[count++] = offset + s;
					index[count++] = offset + s + 1;
				}
			}
		}
	}
	else if (hollow)
	{
		// Closed hollow
		// Outer face
		
		if ( (size_t - 1) * (size_s_out - 1) * 6 >= MAX_INDEX)
			goto noindices;
		for (t = 0; t < size_t - 1; t++)
		{
			for (s = 0; s < size_s_out - 1; s++)
			{
				i  = s + t*size_s;

				index[count++]  = i;				// x,y
				index[count++]  = i + 1;			// x+1,y
				index[count++]  = i + size_s;		// x,y+1

				index[count++]  = i + size_s;		// x,y+1
				index[count++]  = i + 1;			// x+1,y
				index[count++]  = i + 1 + size_s;	// x+1,y+1
			}
		}

		// Inner face
		// Invert facing from outer face
		if ( count + (size_t - 1) * ((size_s - 1) - size_s_out) * 6 >= MAX_INDEX)
			goto noindices;
		for (t = 0; t < size_t - 1; t++)
		{
			for (s = size_s_out; s < size_s - 1; s++)
			{
				i  = s + t*size_s;

				index[count++]  = i;				// x,y
				index[count++]  = i + 1;			// x+1,y
				index[count++]  = i + size_s;		// x,y+1

				index[count++]  = i + size_s;		// x,y+1
				index[count++]  = i + 1;			// x+1,y
				index[count++]  = i + 1 + size_s;	// x+1,y+1
			}
		}

		// Do the top and bottom caps, if necessary
		if (path_open)
		{
			// Top cap
			S32 pt1 = 0;
			S32 pt2 = size_s-1;
			S32 i   = (size_t - 1)*size_s;

			while (pt2 - pt1 > 1)
			{
				// Use the profile points instead of the mesh, since you want
				// the un-transformed profile distances.
				LLVector3 p1 = getProfile().mProfile[pt1];
				LLVector3 p2 = getProfile().mProfile[pt2];
				LLVector3 pa = getProfile().mProfile[pt1+1];
				LLVector3 pb = getProfile().mProfile[pt2-1];

				p1.mV[VZ] = 0.f;
				p2.mV[VZ] = 0.f;
				pa.mV[VZ] = 0.f;
				pb.mV[VZ] = 0.f;

				// Use area of triangle to determine backfacing
				F32 area_1a2, area_1ba, area_21b, area_2ab;
				area_1a2 =  (p1.mV[0]*pa.mV[1] - pa.mV[0]*p1.mV[1]) +
							(pa.mV[0]*p2.mV[1] - p2.mV[0]*pa.mV[1]) +
							(p2.mV[0]*p1.mV[1] - p1.mV[0]*p2.mV[1]);

				area_1ba =  (p1.mV[0]*pb.mV[1] - pb.mV[0]*p1.mV[1]) +
							(pb.mV[0]*pa.mV[1] - pa.mV[0]*pb.mV[1]) +
							(pa.mV[0]*p1.mV[1] - p1.mV[0]*pa.mV[1]);

				area_21b =  (p2.mV[0]*p1.mV[1] - p1.mV[0]*p2.mV[1]) +
							(p1.mV[0]*pb.mV[1] - pb.mV[0]*p1.mV[1]) +
							(pb.mV[0]*p2.mV[1] - p2.mV[0]*pb.mV[1]);

				area_2ab =  (p2.mV[0]*pa.mV[1] - pa.mV[0]*p2.mV[1]) +
							(pa.mV[0]*pb.mV[1] - pb.mV[0]*pa.mV[1]) +
							(pb.mV[0]*p2.mV[1] - p2.mV[0]*pb.mV[1]);

				BOOL use_tri1a2 = TRUE;
				BOOL tri_1a2 = TRUE;
				BOOL tri_21b = TRUE;

				if (area_1a2 < 0)
				{
					tri_1a2 = FALSE;
				}
				if (area_2ab < 0)
				{
					// Can't use, because it contains point b
					tri_1a2 = FALSE;
				}
				if (area_21b < 0)
				{
					tri_21b = FALSE;
				}
				if (area_1ba < 0)
				{
					// Can't use, because it contains point b
					tri_21b = FALSE;
				}

				if (!tri_1a2)
				{
					use_tri1a2 = FALSE;
				}
				else if (!tri_21b)
				{
					use_tri1a2 = TRUE;
				}
				else
				{
					LLVector3 d1 = p1 - pa;
					LLVector3 d2 = p2 - pb;

					if (d1.magVecSquared() < d2.magVecSquared())
					{
						use_tri1a2 = TRUE;
					}
					else
					{
						use_tri1a2 = FALSE;
					}
				}

				if (use_tri1a2)
				{
					if (count + 3 >= MAX_INDEX)
						goto noindices;
					index[count++] = pt1 + i;
					index[count++] = pt1 + 1 + i;
					index[count++] = pt2 + i;
					pt1++;
				}
				else
				{
					if (count + 3 >= MAX_INDEX)
						goto noindices;
					index[count++] = pt1 + i;
					index[count++] = pt2 - 1 + i;
					index[count++] = pt2 + i;
					pt2--;
				}
			}

			// Bottom cap
			pt1          = 0;
			pt2          = size_s-1;
			while (pt2 - pt1 > 1)
			{
				// Use the profile points instead of the mesh, since you want
				// the un-transformed profile distances.
				LLVector3 p1 = getProfile().mProfile[pt1];
				LLVector3 p2 = getProfile().mProfile[pt2];
				LLVector3 pa = getProfile().mProfile[pt1+1];
				LLVector3 pb = getProfile().mProfile[pt2-1];

				p1.mV[VZ] = 0.f;
				p2.mV[VZ] = 0.f;
				pa.mV[VZ] = 0.f;
				pb.mV[VZ] = 0.f;

				// Use area of triangle to determine backfacing
				F32 area_1a2, area_1ba, area_21b, area_2ab;
				area_1a2 =  (p1.mV[0]*pa.mV[1] - pa.mV[0]*p1.mV[1]) +
							(pa.mV[0]*p2.mV[1] - p2.mV[0]*pa.mV[1]) +
							(p2.mV[0]*p1.mV[1] - p1.mV[0]*p2.mV[1]);

				area_1ba =  (p1.mV[0]*pb.mV[1] - pb.mV[0]*p1.mV[1]) +
							(pb.mV[0]*pa.mV[1] - pa.mV[0]*pb.mV[1]) +
							(pa.mV[0]*p1.mV[1] - p1.mV[0]*pa.mV[1]);

				area_21b =  (p2.mV[0]*p1.mV[1] - p1.mV[0]*p2.mV[1]) +
							(p1.mV[0]*pb.mV[1] - pb.mV[0]*p1.mV[1]) +
							(pb.mV[0]*p2.mV[1] - p2.mV[0]*pb.mV[1]);

				area_2ab =  (p2.mV[0]*pa.mV[1] - pa.mV[0]*p2.mV[1]) +
							(pa.mV[0]*pb.mV[1] - pb.mV[0]*pa.mV[1]) +
							(pb.mV[0]*p2.mV[1] - p2.mV[0]*pb.mV[1]);

				BOOL use_tri1a2 = TRUE;
				BOOL tri_1a2 = TRUE;
				BOOL tri_21b = TRUE;

				if (area_1a2 < 0)
				{
					tri_1a2 = FALSE;
				}
				if (area_2ab < 0)
				{
					// Can't use, because it contains point b
					tri_1a2 = FALSE;
				}
				if (area_21b < 0)
				{
					tri_21b = FALSE;
				}
				if (area_1ba < 0)
				{
					// Can't use, because it contains point b
					tri_21b = FALSE;
				}

				if (!tri_1a2)
				{
					use_tri1a2 = FALSE;
				}
				else if (!tri_21b)
				{
					use_tri1a2 = TRUE;
				}
				else
				{
					LLVector3 d1 = p1 - pa;
					LLVector3 d2 = p2 - pb;

					if (d1.magVecSquared() < d2.magVecSquared())
					{
						use_tri1a2 = TRUE;
					}
					else
					{
						use_tri1a2 = FALSE;
					}
				}

				if (use_tri1a2)
				{
					if (count + 3 >= MAX_INDEX)
						goto noindices;
					index[count++] = pt1;
					index[count++] = pt2;
					index[count++] = pt1 + 1;
					pt1++;
				}
				else
				{
					if (count + 3 >= MAX_INDEX)
						goto noindices;
					index[count++] = pt1;
					index[count++] = pt2;
					index[count++] = pt2 - 1;
					pt2--;
				}
			}
		}		
	}
	else
	{
		// Closed solid.  Easy case.
		if ( (size_t - 1) * (size_s - 1) * 6 > MAX_INDEX)
			goto noindices;
		for (t = 0; t < size_t - 1; t++)
		{
			for (s = 0; s < size_s - 1; s++)
			{
				// Should wrap properly, but for now...
				i  = s + t*size_s;

				index[count++]  = i;				// x,y
				index[count++]  = i + 1;			// x+1,y
				index[count++]  = i + size_s;		// x,y+1

				index[count++]  = i + size_s;		// x,y+1
				index[count++]  = i + 1;			// x+1,y
				index[count++]  = i + size_s + 1;	// x+1,y+1
			}
		}

		// Do the top and bottom caps, if necessary
		if (path_open)
		{
			// bottom cap
			if ( count + (size_s - 2 - 1) * 3 >= MAX_INDEX)
				goto noindices;
			for (s = 1; s < size_s - 2; s++)
			{
				index[count++] = s+1;
				index[count++] = s;
				index[count++] = 0;
			}

			// top cap
			S32 offset = (size_t - 1)*size_s;
			if ( count + (size_s - 2 - 1) * 3 >= MAX_INDEX)
				goto noindices;
			for (s = 1; s < size_s - 2; s++)
			{
				// Inverted ordering from bottom cap.
				index[count++] = offset;
				index[count++] = offset + s;
				index[count++] = offset + s + 1;
			}
		}
	}

#if 0
	S32 num_vertices = mMesh.size();
	for (i = 0; i < count; i+=3)
	{
		llinfos << index[i] << ":" << index[i+1] << ":" << index[i+2] << llendl;
		llassert(index[i] < num_vertices);
		llassert(index[i+1] < num_vertices);
		llassert(index[i+2] < num_vertices);
	}
#endif

	indices = new S32[count];
noindices:
	if (!indices)
	{
		llwarns << "Couldn't allocate triangle indices" << llendl;
		num_indices = 0;
		return NULL;
	}
	num_indices = count;
	memcpy(indices, index, count * sizeof(S32));		/* Flawfinder: ignore */
	return indices;
}

//-----------------------------------------------------------------------------
// generateSilhouetteVertices()
//-----------------------------------------------------------------------------
void LLVolume::generateSilhouetteVertices(std::vector<LLVector3> &vertices,
										  std::vector<LLVector3> &normals,
										  std::vector<S32> &segments,
										  const LLVector3& obj_cam_vec,
										  const LLMatrix4& mat,
										  const LLMatrix3& norm_mat)
{
	vertices.clear();
	normals.clear();
	segments.clear();

	//for each face
	for (S32 i = 0; i < getNumVolumeFaces(); i++) {
		LLVolumeFace face = this->getVolumeFace(i);
	
		if (face.mTypeMask & (LLVolumeFace::CAP_MASK)) {
	
		}
		else {

			//==============================================
			//DEBUG draw edge map instead of silhouette edge
			//==============================================

#if DEBUG_SILHOUETTE_EDGE_MAP

			//for each triangle
			U32 count = face.mIndices.size();
			for (U32 j = 0; j < count/3; j++) {
				//get vertices
				S32 v1 = face.mIndices[j*3+0];
				S32 v2 = face.mIndices[j*3+1];
				S32 v3 = face.mIndices[j*3+2];

				//get current face center
				LLVector3 cCenter = (face.mVertices[v1].mPosition + 
									face.mVertices[v2].mPosition + 
									face.mVertices[v3].mPosition) / 3.0f;

				//for each edge
				for (S32 k = 0; k < 3; k++) {
                    S32 nIndex = face.mEdge[j*3+k];
					if (nIndex <= -1) {
						continue;
					}

					if (nIndex >= (S32) count/3) {
						continue;
					}
					//get neighbor vertices
					v1 = face.mIndices[nIndex*3+0];
					v2 = face.mIndices[nIndex*3+1];
					v3 = face.mIndices[nIndex*3+2];

					//get neighbor face center
					LLVector3 nCenter = (face.mVertices[v1].mPosition + 
									face.mVertices[v2].mPosition + 
									face.mVertices[v3].mPosition) / 3.0f;

					//draw line
					vertices.push_back(cCenter);
					vertices.push_back(nCenter);
					normals.push_back(LLVector3(1,1,1));
					normals.push_back(LLVector3(1,1,1));
					segments.push_back(vertices.size());
				}
			}
		
			continue;

			//==============================================
			//DEBUG
			//==============================================

			//==============================================
			//DEBUG draw normals instead of silhouette edge
			//==============================================
#elif DEBUG_SILHOUETTE_NORMALS

			//for each vertex
			for (U32 j = 0; j < face.mVertices.size(); j++) {
				vertices.push_back(face.mVertices[j].mPosition);
				vertices.push_back(face.mVertices[j].mPosition + face.mVertices[j].mNormal*0.1f);
				normals.push_back(LLVector3(0,0,1));
				normals.push_back(LLVector3(0,0,1));
				segments.push_back(vertices.size());
#if DEBUG_SILHOUETTE_BINORMALS
				vertices.push_back(face.mVertices[j].mPosition);
				vertices.push_back(face.mVertices[j].mPosition + face.mVertices[j].mBinormal*0.1f);
				normals.push_back(LLVector3(0,0,1));
				normals.push_back(LLVector3(0,0,1));
				segments.push_back(vertices.size());
#endif
			}
						
			continue;
#else
			//==============================================
			//DEBUG
			//==============================================

			static const U8 AWAY = 0x01,
							TOWARDS = 0x02;

			//for each triangle
			std::vector<U8> fFacing;
			vector_append(fFacing, face.mIndices.size()/3);
			for (U32 j = 0; j < face.mIndices.size()/3; j++) 
			{
				//approximate normal
				S32 v1 = face.mIndices[j*3+0];
				S32 v2 = face.mIndices[j*3+1];
				S32 v3 = face.mIndices[j*3+2];

				LLVector3 norm = (face.mVertices[v1].mPosition - face.mVertices[v2].mPosition) % 
					(face.mVertices[v2].mPosition - face.mVertices[v3].mPosition);
				
				if (norm.magVecSquared() < 0.00000001f) 
				{
					fFacing[j] = AWAY | TOWARDS;
				}
				else 
				{
					//get view vector
					LLVector3 view = (obj_cam_vec-face.mVertices[v1].mPosition);
					bool away = view * norm > 0.0f; 
					if (away) 
					{
						fFacing[j] = AWAY;
					}
					else 
					{
						fFacing[j] = TOWARDS;
					}
				}
			}
			
			//for each triangle
			for (U32 j = 0; j < face.mIndices.size()/3; j++) 
			{
				if (fFacing[j] == (AWAY | TOWARDS)) 
				{ //this is a degenerate triangle
					//take neighbor facing (degenerate faces get facing of one of their neighbors)
					// *FIX IF NEEDED:  this does not deal with neighboring degenerate faces
					for (S32 k = 0; k < 3; k++) 
					{
						S32 index = face.mEdge[j*3+k];
						if (index != -1) 
						{
							fFacing[j] = fFacing[index];
							break;
						}
					}
					continue; //skip degenerate face
				}

				//for each edge
				for (S32 k = 0; k < 3; k++) {
					S32 index = face.mEdge[j*3+k];
					if (index != -1 && fFacing[index] == (AWAY | TOWARDS)) {
						//our neighbor is degenerate, make him face our direction
						fFacing[face.mEdge[j*3+k]] = fFacing[j];
						continue;
					}

					if (index == -1 ||		//edge has no neighbor, MUST be a silhouette edge
						(fFacing[index] & fFacing[j]) == 0) { 	//we found a silhouette edge

						S32 v1 = face.mIndices[j*3+k];
						S32 v2 = face.mIndices[j*3+((k+1)%3)];
						
						vertices.push_back(face.mVertices[v1].mPosition*mat);
						LLVector3 norm1 = face.mVertices[v1].mNormal * norm_mat;
						norm1.normVec();
						normals.push_back(norm1);

						vertices.push_back(face.mVertices[v2].mPosition*mat);
						LLVector3 norm2 = face.mVertices[v2].mNormal * norm_mat;
						norm2.normVec();
						normals.push_back(norm2);

						segments.push_back(vertices.size());
					}
				}		
			}
#endif
		}
	}
}

S32 LLVolume::lineSegmentIntersect(const LLVector3& start, LLVector3& end) const
{
	S32 ret = -1;
	
	LLVector3 vec = end - start;
	
	for (U32 i = 0; i < (U32)getNumFaces(); i++)
	{
		LLVolumeFace face = getVolumeFace(i);

		for (U32 j = 0; j < face.mIndices.size()/3; j++) 
		{
			//approximate normal
			S32 v1 = face.mIndices[j*3+0];
			S32 v2 = face.mIndices[j*3+1];
			S32 v3 = face.mIndices[j*3+2];

			LLVector3 norm = (face.mVertices[v2].mPosition - face.mVertices[v1].mPosition) % 
				(face.mVertices[v3].mPosition - face.mVertices[v2].mPosition);
			
			if (norm.magVecSquared() >= 0.00000001f) 
			{
				//get view vector
				//LLVector3 view = (start-face.mVertices[v1].mPosition);
				//if (view * norm < 0.0f)
				{
					if (LLTriangleLineSegmentIntersect( face.mVertices[v1].mPosition,
														face.mVertices[v2].mPosition,
														face.mVertices[v3].mPosition,
														end,
														vec))
					{
						vec = end-start;
						ret = (S32) i;
					}
				}
			}
		}		
	}
	
	return ret;
}

class LLVertexIndexPair
{
public:
	LLVertexIndexPair(const LLVector3 &vertex, const S32 index);

	LLVector3 mVertex;
	S32	mIndex;
};

LLVertexIndexPair::LLVertexIndexPair(const LLVector3 &vertex, const S32 index)
{
	mVertex = vertex;
	mIndex = index;
}

const F32 VERTEX_SLOP = 0.00001f;
const F32 VERTEX_SLOP_SQRD = VERTEX_SLOP * VERTEX_SLOP;

struct lessVertex
{
	bool operator()(const LLVertexIndexPair *a, const LLVertexIndexPair *b)
	{
		const F32 slop = VERTEX_SLOP;

		if (a->mVertex.mV[0] + slop < b->mVertex.mV[0])
		{
			return TRUE;
		}
		else if (a->mVertex.mV[0] - slop > b->mVertex.mV[0])
		{
			return FALSE;
		}
		
		if (a->mVertex.mV[1] + slop < b->mVertex.mV[1])
		{
			return TRUE;
		}
		else if (a->mVertex.mV[1] - slop > b->mVertex.mV[1])
		{
			return FALSE;
		}
		
		if (a->mVertex.mV[2] + slop < b->mVertex.mV[2])
		{
			return TRUE;
		}
		else if (a->mVertex.mV[2] - slop > b->mVertex.mV[2])
		{
			return FALSE;
		}
		
		return FALSE;
	}
};

struct lessTriangle
{
	bool operator()(const S32 *a, const S32 *b)
	{
		if (*a < *b)
		{
			return TRUE;
		}
		else if (*a > *b)
		{
			return FALSE;
		}

		if (*(a+1) < *(b+1))
		{
			return TRUE;
		}
		else if (*(a+1) > *(b+1))
		{
			return FALSE;
		}

		if (*(a+2) < *(b+2))
		{
			return TRUE;
		}
		else if (*(a+2) > *(b+2))
		{
			return FALSE;
		}

		return FALSE;
	}
};

BOOL equalTriangle(const S32 *a, const S32 *b)
{
	if ((*a == *b) && (*(a+1) == *(b+1)) && ((*a+2) == (*b+2)))
	{
		return TRUE;
	}
	return FALSE;
}

BOOL LLVolume::cleanupTriangleData( const S32 num_input_vertices,
									const std::vector<Point>& input_vertices,
									const S32 num_input_triangles,
									S32 *input_triangles,
									S32 &num_output_vertices,
									LLVector3 **output_vertices,
									S32 &num_output_triangles,
									S32 **output_triangles)
{
	// Here's how we do this:
	// Create a structure which contains the original vertex index and the
	// LLVector3 data.
	// "Sort" the data by the vectors
	// Create an array the size of the old vertex list, with a mapping of
	// old indices to new indices.
	// Go through triangles, shift so the lowest index is first
	// Sort triangles by first index
	// Remove duplicate triangles
	// Allocate and pack new triangle data.

	//LLTimer cleanupTimer;
	//llinfos << "In vertices: " << num_input_vertices << llendl;
	//llinfos << "In triangles: " << num_input_triangles << llendl;

	S32 i;
	typedef std::multiset<LLVertexIndexPair*, lessVertex> vertex_set_t;
	vertex_set_t vertex_list;

	LLVertexIndexPair *pairp = NULL;
	for (i = 0; i < num_input_vertices; i++)
	{
		LLVertexIndexPair *new_pairp = new LLVertexIndexPair(input_vertices[i].mPos, i);
		vertex_list.insert(new_pairp);
	}

	// Generate the vertex mapping and the list of vertices without
	// duplicates.  This will crash if there are no vertices.
	S32 *vertex_mapping = new S32[num_input_vertices];
	LLVector3 *new_vertices = new LLVector3[num_input_vertices];
	LLVertexIndexPair *prev_pairp = NULL;

	S32 new_num_vertices;

	new_num_vertices = 0;
	for (vertex_set_t::iterator iter = vertex_list.begin(),
			 end = vertex_list.end();
		 iter != end; iter++)
	{
		pairp = *iter;
		if (!prev_pairp || ((pairp->mVertex - prev_pairp->mVertex).magVecSquared() >= VERTEX_SLOP_SQRD))	
		{
			new_vertices[new_num_vertices] = pairp->mVertex;
			//llinfos << "Added vertex " << new_num_vertices << " : " << pairp->mVertex << llendl;
			new_num_vertices++;
			// Update the previous
			prev_pairp = pairp;
		}
		else
		{
			//llinfos << "Removed duplicate vertex " << pairp->mVertex << llendl;
		}
		vertex_mapping[pairp->mIndex] = new_num_vertices - 1;
	}

	// Iterate through triangles and remove degenerates, re-ordering vertices
	// along the way.
	S32 *new_triangles = new S32[num_input_triangles * 3];
	S32 new_num_triangles = 0;

	for (i = 0; i < num_input_triangles; i++)
	{
		//llinfos << "Checking triangle " << input_triangles[i*3] << ":" << input_triangles[i*3+1] << ":" << input_triangles[i*3+2] << llendl;
		input_triangles[i*3] = vertex_mapping[input_triangles[i*3]];
		input_triangles[i*3+1] = vertex_mapping[input_triangles[i*3+1]];
		input_triangles[i*3+2] = vertex_mapping[input_triangles[i*3+2]];

		if ((input_triangles[i*3] == input_triangles[i*3+1])
			|| (input_triangles[i*3] == input_triangles[i*3+2])
			|| (input_triangles[i*3+1] == input_triangles[i*3+2]))
		{
			//llinfos << "Removing degenerate triangle " << input_triangles[i*3] << ":" << input_triangles[i*3+1] << ":" << input_triangles[i*3+2] << llendl;
			// Degenerate triangle, skip
			continue;
		}

		if (input_triangles[i*3] < input_triangles[i*3+1])
		{
			if (input_triangles[i*3] < input_triangles[i*3+2])
			{
				// (0 < 1) && (0 < 2)
				new_triangles[new_num_triangles*3] = input_triangles[i*3];
				new_triangles[new_num_triangles*3+1] = input_triangles[i*3+1];
				new_triangles[new_num_triangles*3+2] = input_triangles[i*3+2];
			}
			else
			{
				// (0 < 1) && (2 < 0)
				new_triangles[new_num_triangles*3] = input_triangles[i*3+2];
				new_triangles[new_num_triangles*3+1] = input_triangles[i*3];
				new_triangles[new_num_triangles*3+2] = input_triangles[i*3+1];
			}
		}
		else if (input_triangles[i*3+1] < input_triangles[i*3+2])
		{
			// (1 < 0) && (1 < 2)
			new_triangles[new_num_triangles*3] = input_triangles[i*3+1];
			new_triangles[new_num_triangles*3+1] = input_triangles[i*3+2];
			new_triangles[new_num_triangles*3+2] = input_triangles[i*3];
		}
		else
		{
			// (1 < 0) && (2 < 1)
			new_triangles[new_num_triangles*3] = input_triangles[i*3+2];
			new_triangles[new_num_triangles*3+1] = input_triangles[i*3];
			new_triangles[new_num_triangles*3+2] = input_triangles[i*3+1];
		}
		new_num_triangles++;
	}

	if (new_num_triangles == 0)
	{
		llwarns << "Created volume object with 0 faces." << llendl;
		delete[] new_triangles;
		delete[] vertex_mapping;
		delete[] new_vertices;
		return FALSE;
	}

	typedef std::set<S32*, lessTriangle> triangle_set_t;
	triangle_set_t triangle_list;

	for (i = 0; i < new_num_triangles; i++)
	{
		triangle_list.insert(&new_triangles[i*3]);
	}

	// Sort through the triangle list, and delete duplicates

	S32 *prevp = NULL;
	S32 *curp = NULL;

	S32 *sorted_tris = new S32[new_num_triangles*3];
	S32 cur_tri = 0;
	for (triangle_set_t::iterator iter = triangle_list.begin(),
			 end = triangle_list.end();
		 iter != end; iter++)
	{
		curp = *iter;
		if (!prevp || !equalTriangle(prevp, curp))
		{
			//llinfos << "Added triangle " << *curp << ":" << *(curp+1) << ":" << *(curp+2) << llendl;
			sorted_tris[cur_tri*3] = *curp;
			sorted_tris[cur_tri*3+1] = *(curp+1);
			sorted_tris[cur_tri*3+2] = *(curp+2);
			cur_tri++;
			prevp = curp;
		}
		else
		{
			//llinfos << "Skipped triangle " << *curp << ":" << *(curp+1) << ":" << *(curp+2) << llendl;
		}
	}

	*output_vertices = new LLVector3[new_num_vertices];
	num_output_vertices = new_num_vertices;
	for (i = 0; i < new_num_vertices; i++)
	{
		(*output_vertices)[i] = new_vertices[i];
	}

	*output_triangles = new S32[cur_tri*3];
	num_output_triangles = cur_tri;
	memcpy(*output_triangles, sorted_tris, 3*cur_tri*sizeof(S32));		/* Flawfinder: ignore */

	/*
	llinfos << "Out vertices: " << num_output_vertices << llendl;
	llinfos << "Out triangles: " << num_output_triangles << llendl;
	for (i = 0; i < num_output_vertices; i++)
	{
		llinfos << i << ":" << (*output_vertices)[i] << llendl;
	}
	for (i = 0; i < num_output_triangles; i++)
	{
		llinfos << i << ":" << (*output_triangles)[i*3] << ":" << (*output_triangles)[i*3+1] << ":" << (*output_triangles)[i*3+2] << llendl;
	}
	*/

	//llinfos << "Out vertices: " << num_output_vertices << llendl;
	//llinfos << "Out triangles: " << num_output_triangles << llendl;
	delete[] vertex_mapping;
	vertex_mapping = NULL;
	delete[] new_vertices;
	new_vertices = NULL;
	delete[] new_triangles;
	new_triangles = NULL;
	delete[] sorted_tris;
	sorted_tris = NULL;
	triangle_list.clear();
	std::for_each(vertex_list.begin(), vertex_list.end(), DeletePointer());
	vertex_list.clear();
	
	return TRUE;
}


BOOL LLVolumeParams::importFile(FILE *fp)
{
	//llinfos << "importing volume" << llendl;
	const S32 BUFSIZE = 16384;
	char buffer[BUFSIZE];	/* Flawfinder: ignore */
	// *NOTE: changing the size or type of this buffer will require
	// changing the sscanf below.
	char keyword[256];	/* Flawfinder: ignore */
	keyword[0] = 0;

	while (!feof(fp))
	{
		fgets(buffer, BUFSIZE, fp);
		sscanf(buffer, " %255s", keyword);	/* Flawfinder: ignore */
		if (!strcmp("{", keyword))
		{
			continue;
		}
		if (!strcmp("}",keyword))
		{
			break;
		}
		else if (!strcmp("profile", keyword))
		{
			mProfileParams.importFile(fp);
		}
		else if (!strcmp("path",keyword))
		{
			mPathParams.importFile(fp);
		}
		else
		{
			llwarns << "unknown keyword " << keyword << " in volume import" << llendl;
		}
	}

	return TRUE;
}

BOOL LLVolumeParams::exportFile(FILE *fp) const
{
	fprintf(fp,"\tshape 0\n");
	fprintf(fp,"\t{\n");
	mPathParams.exportFile(fp);
	mProfileParams.exportFile(fp);
	fprintf(fp, "\t}\n");
	return TRUE;
}


BOOL LLVolumeParams::importLegacyStream(std::istream& input_stream)
{
	//llinfos << "importing volume" << llendl;
	const S32 BUFSIZE = 16384;
	// *NOTE: changing the size or type of this buffer will require
	// changing the sscanf below.
	char buffer[BUFSIZE];		/* Flawfinder: ignore */
	char keyword[256];		/* Flawfinder: ignore */
	keyword[0] = 0;

	while (input_stream.good())
	{
		input_stream.getline(buffer, BUFSIZE);
		sscanf(buffer, " %255s", keyword);
		if (!strcmp("{", keyword))
		{
			continue;
		}
		if (!strcmp("}",keyword))
		{
			break;
		}
		else if (!strcmp("profile", keyword))
		{
			mProfileParams.importLegacyStream(input_stream);
		}
		else if (!strcmp("path",keyword))
		{
			mPathParams.importLegacyStream(input_stream);
		}
		else
		{
			llwarns << "unknown keyword " << keyword << " in volume import" << llendl;
		}
	}

	return TRUE;
}

BOOL LLVolumeParams::exportLegacyStream(std::ostream& output_stream) const
{
	output_stream <<"\tshape 0\n";
	output_stream <<"\t{\n";
	mPathParams.exportLegacyStream(output_stream);
	mProfileParams.exportLegacyStream(output_stream);
	output_stream << "\t}\n";
	return TRUE;
}

LLSD LLVolumeParams::asLLSD() const
{
	LLSD sd = LLSD();
	sd["path"] = mPathParams;
	sd["profile"] = mProfileParams;
	return sd;
}

bool LLVolumeParams::fromLLSD(LLSD& sd)
{
	mPathParams.fromLLSD(sd["path"]);
	mProfileParams.fromLLSD(sd["profile"]);
	return true;
}

void LLVolumeParams::reduceS(F32 begin, F32 end)
{
	begin = llclampf(begin);
	end = llclampf(end);
	if (begin > end)
	{
		F32 temp = begin;
		begin = end;
		end = temp;
	}
	F32 a = mProfileParams.getBegin();
	F32 b = mProfileParams.getEnd();
	mProfileParams.setBegin(a + begin * (b - a));
	mProfileParams.setEnd(a + end * (b - a));
}

void LLVolumeParams::reduceT(F32 begin, F32 end)
{
	begin = llclampf(begin);
	end = llclampf(end);
	if (begin > end)
	{
		F32 temp = begin;
		begin = end;
		end = temp;
	}
	F32 a = mPathParams.getBegin();
	F32 b = mPathParams.getEnd();
	mPathParams.setBegin(a + begin * (b - a));
	mPathParams.setEnd(a + end * (b - a));
}

BOOL LLVolumeParams::isConvex() const
{
	// The logic for determining convexity is a little convoluted.
	 
	// Do we need to take getTwistBegin into account?  DK 08/12/04
	if (   mProfileParams.getHollow() != 0.0f 
		|| mPathParams.getTwist() != mPathParams.getTwistBegin() )
	{
		// hollow or twist gaurantees concavity
		return FALSE;
	}

	F32 profile_length = mProfileParams.getEnd() - mProfileParams.getBegin();
	BOOL concave_profile = (profile_length < 1.0f) && (profile_length > 0.5f);
	if (concave_profile)
	{
		// concave profile
		return FALSE;
	}

	U8 path_type = mPathParams.getCurveType();
	if ( LL_PCODE_PATH_LINE == path_type )
	{
		// straight paths with convex profile
		return TRUE;
	}

	F32 path_length = mPathParams.getEnd() - mPathParams.getBegin();
	BOOL concave_path = (path_length < 1.0f) && (path_length > 0.5f);
	if (concave_path)
	{
		return FALSE;
	}

	// we're left with spheres, toroids and tubes
	// only the spheres can be convex
	U8 profile_type = mProfileParams.getCurveType() & LL_PCODE_PROFILE_MASK;
	if ( LL_PCODE_PROFILE_CIRCLE_HALF == profile_type )
	{
		return TRUE;
	}

	// it's a toroid or tube		
	return FALSE;
}

LLFaceID LLVolume::generateFaceMask()
{
	LLFaceID new_mask = 0x0000;

	switch(mProfilep->mParams.getCurveType() & LL_PCODE_PROFILE_MASK)
	{
	case LL_PCODE_PROFILE_CIRCLE:
	case LL_PCODE_PROFILE_CIRCLE_HALF:
		new_mask |= LL_FACE_OUTER_SIDE_0;
		break;
	case LL_PCODE_PROFILE_SQUARE:
		{
			for(S32 side = (S32)(mProfilep->mParams.getBegin() * 4.f); side < llceil(mProfilep->mParams.getEnd() * 4.f); side++)
			{
				new_mask |= LL_FACE_OUTER_SIDE_0 << side;
			}
		}
		break;
	case LL_PCODE_PROFILE_ISOTRI:
	case LL_PCODE_PROFILE_EQUALTRI:
	case LL_PCODE_PROFILE_RIGHTTRI:
		{
			for(S32 side = (S32)(mProfilep->mParams.getBegin() * 3.f); side < llceil(mProfilep->mParams.getEnd() * 3.f); side++)
			{
				new_mask |= LL_FACE_OUTER_SIDE_0 << side;
			}
		}
		break;
	default:
		llerrs << "Unknown profile!" << llendl
		break;
	}

	// handle hollow objects
	if (mProfilep->isHollow())
	{
		new_mask |= LL_FACE_INNER_SIDE;
	}

	// handle open profile curves
	if (mProfilep->isOpen())
	{
		new_mask |= LL_FACE_PROFILE_BEGIN | LL_FACE_PROFILE_END;
	}

	// handle open path curves
	if (mPathp->isOpen())
	{
		new_mask |= LL_FACE_PATH_BEGIN | LL_FACE_PATH_END;
	}

	return new_mask;
}

BOOL LLVolume::isFaceMaskValid(LLFaceID face_mask)
{
	LLFaceID test_mask = 0;
	for(S32 i = 0; i < getNumFaces(); i++)
	{
		test_mask |= mProfilep->mFaces[i].mFaceID;
	}

	return test_mask == face_mask;
}

BOOL LLVolume::isConvex() const
{
	// mParams.isConvex() may return FALSE even though the final
	// geometry is actually convex due to LOD approximations.
	// TODO -- provide LLPath and LLProfile with isConvex() methods
	// that correctly determine convexity. -- Leviathan
	return mParams.isConvex();
}


std::ostream& operator<<(std::ostream &s, const LLProfileParams &profile_params)
{
	s << "{type=" << (U32) profile_params.mCurveType;
	s << ", begin=" << profile_params.mBegin;
	s << ", end=" << profile_params.mEnd;
	s << ", hollow=" << profile_params.mHollow;
	s << "}";
	return s;
}


std::ostream& operator<<(std::ostream &s, const LLPathParams &path_params)
{
	s << "{type=" << (U32) path_params.mCurveType;
	s << ", begin=" << path_params.mBegin;
	s << ", end=" << path_params.mEnd;
	s << ", twist=" << path_params.mTwistEnd;
	s << ", scale=" << path_params.mScale;
	s << ", shear=" << path_params.mShear;
	s << ", twist_begin=" << path_params.mTwistBegin;
	s << ", radius_offset=" << path_params.mRadiusOffset;
	s << ", taper=" << path_params.mTaper;
	s << ", revolutions=" << path_params.mRevolutions;
	s << ", skew=" << path_params.mSkew;
	s << "}";
	return s;
}


std::ostream& operator<<(std::ostream &s, const LLVolumeParams &volume_params)
{
	s << "{profileparams = " << volume_params.mProfileParams;
	s << ", pathparams = " << volume_params.mPathParams;
	s << "}";
	return s;
}


std::ostream& operator<<(std::ostream &s, const LLProfile &profile)
{
	s << " {open=" << (U32) profile.mOpen;
	s << ", dirty=" << profile.mDirty;
	s << ", totalout=" << profile.mTotalOut;
	s << ", total=" << profile.mTotal;
	s << "}";
	return s;
}


std::ostream& operator<<(std::ostream &s, const LLPath &path)
{
	s << "{open=" << (U32) path.mOpen;
	s << ", dirty=" << path.mDirty;
	s << ", step=" << path.mStep;
	s << ", total=" << path.mTotal;
	s << "}";
	return s;
}

std::ostream& operator<<(std::ostream &s, const LLVolume &volume)
{
	s << "{params = " << volume.mParams;
	s << ", path = " << *volume.mPathp;
	s << ", profile = " << *volume.mProfilep;
	s << "}";
	return s;
}


std::ostream& operator<<(std::ostream &s, const LLVolume *volumep)
{
	s << "{params = " << volumep->mParams;
	s << ", path = " << *(volumep->mPathp);
	s << ", profile = " << *(volumep->mProfilep);
	s << "}";
	return s;
}


LLVolumeFace::LLVolumeFace()
{
	mTypeMask = 0;
	mID = 0;
	mBeginS = 0;
	mBeginT = 0;
	mNumS = 0;
	mNumT = 0;
}


BOOL LLVolumeFace::create()
{
	if (mTypeMask & CAP_MASK)
	{
		return createCap();
	}
	else if ((mTypeMask & END_MASK) || (mTypeMask & SIDE_MASK))
	{
		return createSide();
	}
	else
	{
		llerrs << "Unknown/uninitialized face type!" << llendl;
		return FALSE;
	}
}

void	LerpPlanarVertex(LLVolumeFace::VertexData& v0,
				   LLVolumeFace::VertexData& v1,
				   LLVolumeFace::VertexData& v2,
				   LLVolumeFace::VertexData& vout,
				   F32	coef01,
				   F32	coef02)
{
	vout.mPosition = v0.mPosition + ((v1.mPosition-v0.mPosition)*coef01)+((v2.mPosition-v0.mPosition)*coef02);
	vout.mTexCoord = v0.mTexCoord + ((v1.mTexCoord-v0.mTexCoord)*coef01)+((v2.mTexCoord-v0.mTexCoord)*coef02);
	vout.mNormal = v0.mNormal;
	vout.mBinormal = v0.mBinormal;
}

BOOL LLVolumeFace::createUnCutCubeCap()
{
	const std::vector<LLVolume::Point>& mesh = mVolumep->getMesh();
	const std::vector<LLVector3>& profile = mVolumep->getProfile().mProfile;
	S32 max_s = mVolumep->getProfile().getTotal();
	S32 max_t = mVolumep->getPath().mPath.size();

	// S32 i;
	S32 num_vertices = 0, num_indices = 0;
	S32	grid_size = (profile.size()-1)/4;
	S32	quad_count = (grid_size * grid_size);

	num_vertices = (grid_size+1)*(grid_size+1);
	num_indices = quad_count * 4;

	LLVector3& min = mExtents[0];
	LLVector3& max = mExtents[1];

	S32 offset = 0;
	if (mTypeMask & TOP_MASK)
		offset = (max_t-1) * max_s;
	else
		offset = mBeginS;

	VertexData	corners[4];
	VertexData baseVert;
	for(int t = 0; t < 4; t++){
		corners[t].mPosition = mesh[offset + (grid_size*t)].mPos;
		corners[t].mTexCoord.mV[0] = profile[grid_size*t].mV[0]+0.5f;
		corners[t].mTexCoord.mV[1] = 0.5f - profile[grid_size*t].mV[1];
	}
	baseVert.mNormal = 
		((corners[1].mPosition-corners[0].mPosition) % 
		(corners[2].mPosition-corners[1].mPosition));
	baseVert.mNormal.normVec();
	if(!(mTypeMask & TOP_MASK)){
		baseVert.mNormal *= -1.0f;
	}else{
		//Swap the UVs on the U(X) axis for top face
		LLVector2 swap;
		swap = corners[0].mTexCoord;
		corners[0].mTexCoord=corners[3].mTexCoord;
		corners[3].mTexCoord=swap;
		swap = corners[1].mTexCoord;
		corners[1].mTexCoord=corners[2].mTexCoord;
		corners[2].mTexCoord=swap;
	}
	baseVert.mBinormal = calc_binormal_from_triangle( 
		corners[0].mPosition, corners[0].mTexCoord,
		corners[1].mPosition, corners[1].mTexCoord,
		corners[2].mPosition, corners[2].mTexCoord);
	for(int t = 0; t < 4; t++){
		corners[t].mBinormal = baseVert.mBinormal;
		corners[t].mNormal = baseVert.mNormal;
	}

	S32	vtop = mVertices.size();
	for(int gx = 0;gx<grid_size+1;gx++){
		for(int gy = 0;gy<grid_size+1;gy++){
			VertexData newVert;
			LerpPlanarVertex(
				corners[0],
				corners[1],
				corners[3],
				newVert,
				(F32)gx/(F32)grid_size,
				(F32)gy/(F32)grid_size);
			mVertices.push_back(newVert);

			if (gx == 0 && gy == 0)
			{
				min = max = newVert.mPosition;
			}
			else
			{
				update_min_max(min,max,newVert.mPosition);
			}
		}
	}
	
	mCenter = (min + max) * 0.5f;

	int idxs[] = {0,1,(grid_size+1)+1,(grid_size+1)+1,(grid_size+1),0};
	for(int gx = 0;gx<grid_size;gx++){
		for(int gy = 0;gy<grid_size;gy++){
			if (mTypeMask & TOP_MASK){
				for(int i=5;i>=0;i--)mIndices.push_back(vtop+(gy*(grid_size+1))+gx+idxs[i]);
			}else{
				for(int i=0;i<6;i++)mIndices.push_back(vtop+(gy*(grid_size+1))+gx+idxs[i]);
			}
		}
	}
	
	return TRUE;
}


BOOL LLVolumeFace::createCap()
{
	if (!(mTypeMask & HOLLOW_MASK) && 
		!(mTypeMask & OPEN_MASK) && 
		((this->mVolumep->getParams().getPathParams().getBegin()==0.0f)&&
		(this->mVolumep->getParams().getPathParams().getEnd()==1.0f))&&
		(mVolumep->getProfile().mParams.getCurveType()==LL_PCODE_PROFILE_SQUARE &&
			mVolumep->getPath().mParams.getCurveType()==LL_PCODE_PATH_LINE)	
		){
		return createUnCutCubeCap();
	}

	S32 i;
	S32 num_vertices = 0, num_indices = 0;

	const std::vector<LLVolume::Point>& mesh = mVolumep->getMesh();
	const std::vector<LLVector3>& profile = mVolumep->getProfile().mProfile;

	// All types of caps have the same number of vertices and indices
	num_vertices = profile.size();
	num_indices = (profile.size() - 2)*3;
	vector_append(mVertices,num_vertices);
	vector_append(mIndices,num_indices);

	S32 max_s = mVolumep->getProfile().getTotal();
	S32 max_t = mVolumep->getPath().mPath.size();

	mCenter.clearVec();

	S32 offset = 0;
	if (mTypeMask & TOP_MASK)
	{
		offset = (max_t-1) * max_s;
	}
	else
	{
		offset = mBeginS;
	}

	// Figure out the normal, assume all caps are flat faces.
	// Cross product to get normals.
	
	LLVector2 cuv;
	LLVector2 min_uv, max_uv;

	LLVector3& min = mExtents[0];
	LLVector3& max = mExtents[1];

	// Copy the vertices into the array
	for (i = 0; i < num_vertices; i++)
	{
		if (mTypeMask & TOP_MASK)
		{
			mVertices[i].mTexCoord.mV[0] = profile[i].mV[0]+0.5f;
			mVertices[i].mTexCoord.mV[1] = profile[i].mV[1]+0.5f;
		}
		else
		{
			// Mirror for underside.
			mVertices[i].mTexCoord.mV[0] = profile[i].mV[0]+0.5f;
			mVertices[i].mTexCoord.mV[1] = 0.5f - profile[i].mV[1];
		}

		mVertices[i].mPosition = mesh[i + offset].mPos;
		
		if (i == 0)
		{
			min = max = mVertices[i].mPosition;
			min_uv = max_uv = mVertices[i].mTexCoord;
		}
		else
		{
			update_min_max(min,max, mVertices[i].mPosition);
			update_min_max(min_uv, max_uv, mVertices[i].mTexCoord);
		}
	}

	mCenter = (min+max)*0.5f;
	cuv = (min_uv + max_uv)*0.5f;

	LLVector3 binormal = calc_binormal_from_triangle( 
		mCenter, cuv,
		mVertices[0].mPosition, mVertices[0].mTexCoord,
		mVertices[1].mPosition, mVertices[1].mTexCoord);
	binormal.normVec();

	LLVector3 d0;
	LLVector3 d1;
	LLVector3 normal;

	d0 = mCenter-mVertices[0].mPosition;
	d1 = mCenter-mVertices[1].mPosition;

	normal = (mTypeMask & TOP_MASK) ? (d0%d1) : (d1%d0);
	normal.normVec();

	VertexData vd;
	vd.mPosition = mCenter;
	vd.mNormal = normal;
	vd.mBinormal = binormal;
	vd.mTexCoord = cuv;
	
	if (!(mTypeMask & HOLLOW_MASK) && !(mTypeMask & OPEN_MASK))
	{
		mVertices.push_back(vd);
		num_vertices++;
		vector_append(mIndices, 3);
	}
		
	
	for (i = 0; i < num_vertices; i++)
	{
		mVertices[i].mBinormal = binormal;
		mVertices[i].mNormal = normal;
	}

	if (mTypeMask & HOLLOW_MASK)
	{
		if (mTypeMask & TOP_MASK)
		{
			// HOLLOW TOP
			// Does it matter if it's open or closed? - djs

			S32 pt1 = 0, pt2 = num_vertices - 1;
			i = 0;
			while (pt2 - pt1 > 1)
			{
				// Use the profile points instead of the mesh, since you want
				// the un-transformed profile distances.
				LLVector3 p1 = profile[pt1];
				LLVector3 p2 = profile[pt2];
				LLVector3 pa = profile[pt1+1];
				LLVector3 pb = profile[pt2-1];

				p1.mV[VZ] = 0.f;
				p2.mV[VZ] = 0.f;
				pa.mV[VZ] = 0.f;
				pb.mV[VZ] = 0.f;

				// Use area of triangle to determine backfacing
				F32 area_1a2, area_1ba, area_21b, area_2ab;
				area_1a2 =  (p1.mV[0]*pa.mV[1] - pa.mV[0]*p1.mV[1]) +
							(pa.mV[0]*p2.mV[1] - p2.mV[0]*pa.mV[1]) +
							(p2.mV[0]*p1.mV[1] - p1.mV[0]*p2.mV[1]);

				area_1ba =  (p1.mV[0]*pb.mV[1] - pb.mV[0]*p1.mV[1]) +
							(pb.mV[0]*pa.mV[1] - pa.mV[0]*pb.mV[1]) +
							(pa.mV[0]*p1.mV[1] - p1.mV[0]*pa.mV[1]);

				area_21b =  (p2.mV[0]*p1.mV[1] - p1.mV[0]*p2.mV[1]) +
							(p1.mV[0]*pb.mV[1] - pb.mV[0]*p1.mV[1]) +
							(pb.mV[0]*p2.mV[1] - p2.mV[0]*pb.mV[1]);

				area_2ab =  (p2.mV[0]*pa.mV[1] - pa.mV[0]*p2.mV[1]) +
							(pa.mV[0]*pb.mV[1] - pb.mV[0]*pa.mV[1]) +
							(pb.mV[0]*p2.mV[1] - p2.mV[0]*pb.mV[1]);

				BOOL use_tri1a2 = TRUE;
				BOOL tri_1a2 = TRUE;
				BOOL tri_21b = TRUE;

				if (area_1a2 < 0)
				{
					tri_1a2 = FALSE;
				}
				if (area_2ab < 0)
				{
					// Can't use, because it contains point b
					tri_1a2 = FALSE;
				}
				if (area_21b < 0)
				{
					tri_21b = FALSE;
				}
				if (area_1ba < 0)
				{
					// Can't use, because it contains point b
					tri_21b = FALSE;
				}

				if (!tri_1a2)
				{
					use_tri1a2 = FALSE;
				}
				else if (!tri_21b)
				{
					use_tri1a2 = TRUE;
				}
				else
				{
					LLVector3 d1 = p1 - pa;
					LLVector3 d2 = p2 - pb;

					if (d1.magVecSquared() < d2.magVecSquared())
					{
						use_tri1a2 = TRUE;
					}
					else
					{
						use_tri1a2 = FALSE;
					}
				}

				if (use_tri1a2)
				{
					mIndices[i++] = pt1;
					mIndices[i++] = pt1 + 1;
					mIndices[i++] = pt2;
					pt1++;
				}
				else
				{
					mIndices[i++] = pt1;
					mIndices[i++] = pt2 - 1;
					mIndices[i++] = pt2;
					pt2--;
				}
			}
		}
		else
		{
			// HOLLOW BOTTOM
			// Does it matter if it's open or closed? - djs

			llassert(mTypeMask & BOTTOM_MASK);
			S32 pt1 = 0, pt2 = num_vertices - 1;

			i = 0;
			while (pt2 - pt1 > 1)
			{
				// Use the profile points instead of the mesh, since you want
				// the un-transformed profile distances.
				LLVector3 p1 = profile[pt1];
				LLVector3 p2 = profile[pt2];
				LLVector3 pa = profile[pt1+1];
				LLVector3 pb = profile[pt2-1];

				p1.mV[VZ] = 0.f;
				p2.mV[VZ] = 0.f;
				pa.mV[VZ] = 0.f;
				pb.mV[VZ] = 0.f;

				// Use area of triangle to determine backfacing
				F32 area_1a2, area_1ba, area_21b, area_2ab;
				area_1a2 =  (p1.mV[0]*pa.mV[1] - pa.mV[0]*p1.mV[1]) +
							(pa.mV[0]*p2.mV[1] - p2.mV[0]*pa.mV[1]) +
							(p2.mV[0]*p1.mV[1] - p1.mV[0]*p2.mV[1]);

				area_1ba =  (p1.mV[0]*pb.mV[1] - pb.mV[0]*p1.mV[1]) +
							(pb.mV[0]*pa.mV[1] - pa.mV[0]*pb.mV[1]) +
							(pa.mV[0]*p1.mV[1] - p1.mV[0]*pa.mV[1]);

				area_21b =  (p2.mV[0]*p1.mV[1] - p1.mV[0]*p2.mV[1]) +
							(p1.mV[0]*pb.mV[1] - pb.mV[0]*p1.mV[1]) +
							(pb.mV[0]*p2.mV[1] - p2.mV[0]*pb.mV[1]);

				area_2ab =  (p2.mV[0]*pa.mV[1] - pa.mV[0]*p2.mV[1]) +
							(pa.mV[0]*pb.mV[1] - pb.mV[0]*pa.mV[1]) +
							(pb.mV[0]*p2.mV[1] - p2.mV[0]*pb.mV[1]);

				BOOL use_tri1a2 = TRUE;
				BOOL tri_1a2 = TRUE;
				BOOL tri_21b = TRUE;

				if (area_1a2 < 0)
				{
					tri_1a2 = FALSE;
				}
				if (area_2ab < 0)
				{
					// Can't use, because it contains point b
					tri_1a2 = FALSE;
				}
				if (area_21b < 0)
				{
					tri_21b = FALSE;
				}
				if (area_1ba < 0)
				{
					// Can't use, because it contains point b
					tri_21b = FALSE;
				}

				if (!tri_1a2)
				{
					use_tri1a2 = FALSE;
				}
				else if (!tri_21b)
				{
					use_tri1a2 = TRUE;
				}
				else
				{
					LLVector3 d1 = p1 - pa;
					LLVector3 d2 = p2 - pb;

					if (d1.magVecSquared() < d2.magVecSquared())
					{
						use_tri1a2 = TRUE;
					}
					else
					{
						use_tri1a2 = FALSE;
					}
				}

				// Flipped backfacing from top
				if (use_tri1a2)
				{
					mIndices[i++] = pt1;
					mIndices[i++] = pt2;
					mIndices[i++] = pt1 + 1;
					pt1++;
				}
				else
				{
					mIndices[i++] = pt1;
					mIndices[i++] = pt2;
					mIndices[i++] = pt2 - 1;
					pt2--;
				}
			}
		}
	}
	else
	{
		// Not hollow, generate the triangle fan.
		if (mTypeMask & TOP_MASK)
		{
			if (mTypeMask & OPEN_MASK)
			{
				// SOLID OPEN TOP
				// Generate indices
				// This is a tri-fan, so we reuse the same first point for all triangles.
				for (i = 0; i < (num_vertices - 2); i++)
				{
					mIndices[3*i] = num_vertices - 1;
					mIndices[3*i+1] = i;
					mIndices[3*i+2] = i + 1;
				}
			}
			else
			{
				// SOLID CLOSED TOP
				for (i = 0; i < (num_vertices - 2); i++)
				{				
					//MSMSM fix these caps but only for the un-cut case
					mIndices[3*i] = num_vertices - 1;
					mIndices[3*i+1] = i;
					mIndices[3*i+2] = i + 1;
				}
			}
		}
		else
		{
			if (mTypeMask & OPEN_MASK)
			{
				// SOLID OPEN BOTTOM
				// Generate indices
				// This is a tri-fan, so we reuse the same first point for all triangles.
				for (i = 0; i < (num_vertices - 2); i++)
				{
					mIndices[3*i] = num_vertices - 1;
					mIndices[3*i+1] = i + 1;
					mIndices[3*i+2] = i;
				}
			}
			else
			{
				// SOLID CLOSED BOTTOM
				for (i = 0; i < (num_vertices - 2); i++)
				{
					//MSMSM fix these caps but only for the un-cut case
					mIndices[3*i] = num_vertices - 1;
					mIndices[3*i+1] = i + 1;
					mIndices[3*i+2] = i;
				}
			}
		}
	}
	return TRUE;
}

BOOL LLVolumeFace::createSide()
{
	BOOL flat = mTypeMask & FLAT_MASK;
	S32 num_vertices, num_indices;

	const std::vector<LLVolume::Point>& mesh = mVolumep->getMesh();
	const std::vector<LLVector3>& profile = mVolumep->getProfile().mProfile;
	const std::vector<LLPath::PathPt>& path_data = mVolumep->getPath().mPath;

	S32 max_s = mVolumep->getProfile().getTotal();

	S32 s, t, i;
	F32 ss, tt;

	num_vertices = mNumS*mNumT;
	num_indices = (mNumS-1)*(mNumT-1)*6;
	vector_append(mVertices,num_vertices);
	vector_append(mIndices,num_indices);
	vector_append(mEdge, num_indices);

	LLVector3& face_min = mExtents[0];
	LLVector3& face_max = mExtents[1];

	mCenter.clearVec();

	S32 begin_stex = llfloor( profile[mBeginS].mV[2] );
	S32 num_s = ((mTypeMask & INNER_MASK) && (mTypeMask & FLAT_MASK) && mNumS > 2) ? mNumS/2 : mNumS;

	S32 cur_vertex = 0;
	// Copy the vertices into the array
	for (t = mBeginT; t < mBeginT + mNumT; t++)
	{
		tt = path_data[t].mTexT;
		for (s = 0; s < num_s; s++)
		{
			if (mTypeMask & END_MASK)
			{
				if (s)
				{
					ss = 1.f;
				}
				else
				{
					ss = 0.f;
				}
			}
			else
			{
				// Get s value for tex-coord.
				if (!flat)
				{
					ss = profile[mBeginS + s].mV[2];
				}
				else
				{
					ss = profile[mBeginS + s].mV[2] - begin_stex;
				}
			}

			// Check to see if this triangle wraps around the array.
			if (mBeginS + s >= max_s)
			{
				// We're wrapping
				i = mBeginS + s + max_s*(t-1);
			}
			else
			{
				i = mBeginS + s + max_s*t;
			}

			mVertices[cur_vertex].mPosition = mesh[i].mPos;
			mVertices[cur_vertex].mTexCoord = LLVector2(ss,tt);
		
			mVertices[cur_vertex].mNormal = LLVector3(0,0,0);
			mVertices[cur_vertex].mBinormal = LLVector3(0,0,0);
			
			if (cur_vertex == 0)
			{
				face_min = face_max = mesh[i].mPos;
			}
			else
			{
				update_min_max(face_min, face_max, mesh[i].mPos);
			}

			cur_vertex++;

			if ((mTypeMask & INNER_MASK) && (mTypeMask & FLAT_MASK) && mNumS > 2 && s > 0)
			{
				mVertices[cur_vertex].mPosition = mesh[i].mPos;
				mVertices[cur_vertex].mTexCoord = LLVector2(ss,tt);
			
				mVertices[cur_vertex].mNormal = LLVector3(0,0,0);
				mVertices[cur_vertex].mBinormal = LLVector3(0,0,0);
				cur_vertex++;
			}
		}
		
		if ((mTypeMask & INNER_MASK) && (mTypeMask & FLAT_MASK) && mNumS > 2)
		{
			if (mTypeMask & OPEN_MASK)
			{
				s = num_s-1;
			}
			else
			{
				s = 0;
			}

			i = mBeginS + s + max_s*t;
			ss = profile[mBeginS + s].mV[2] - begin_stex;
			mVertices[cur_vertex].mPosition = mesh[i].mPos;
			mVertices[cur_vertex].mTexCoord = LLVector2(ss,tt);
		
			mVertices[cur_vertex].mNormal = LLVector3(0,0,0);
			mVertices[cur_vertex].mBinormal = LLVector3(0,0,0);

			update_min_max(face_min,face_max,mesh[i].mPos);

			cur_vertex++;
		}
	}
	
	mCenter = (face_min + face_max) * 0.5f;

	S32 cur_index = 0;
	S32 cur_edge = 0;
	BOOL flat_face = mTypeMask & FLAT_MASK;

	// Now we generate the indices.
	for (t = 0; t < (mNumT-1); t++)
	{
		for (s = 0; s < (mNumS-1); s++)
		{	
			mIndices[cur_index++] = s   + mNumS*t;			//bottom left
			mIndices[cur_index++] = s+1 + mNumS*(t+1);		//top right
			mIndices[cur_index++] = s   + mNumS*(t+1);		//top left
			mIndices[cur_index++] = s   + mNumS*t;			//bottom left
			mIndices[cur_index++] = s+1 + mNumS*t;			//bottom right
			mIndices[cur_index++] = s+1 + mNumS*(t+1);		//top right

			mEdge[cur_edge++] = (mNumS-1)*2*t+s*2+1;						//bottom left/top right neighbor face 
			if (t < mNumT-2) {												//top right/top left neighbor face 
				mEdge[cur_edge++] = (mNumS-1)*2*(t+1)+s*2+1;
			}
			else if (mNumT <= 3 || mVolumep->getPath().isOpen() == TRUE) { //no neighbor
				mEdge[cur_edge++] = -1;
			}
			else { //wrap on T
				mEdge[cur_edge++] = s*2+1;
			}
			if (s > 0) {													//top left/bottom left neighbor face
				mEdge[cur_edge++] = (mNumS-1)*2*t+s*2-1;
			}
			else if (flat_face ||  mVolumep->getProfile().isOpen() == TRUE) { //no neighbor
				mEdge[cur_edge++] = -1;
			}
			else {	//wrap on S
				mEdge[cur_edge++] = (mNumS-1)*2*t+(mNumS-2)*2+1;
			}
			
			if (t > 0) {													//bottom left/bottom right neighbor face
				mEdge[cur_edge++] = (mNumS-1)*2*(t-1)+s*2;
			}
			else if (mNumT <= 3 || mVolumep->getPath().isOpen() == TRUE) { //no neighbor
				mEdge[cur_edge++] = -1;
			}
			else { //wrap on T
				mEdge[cur_edge++] = (mNumS-1)*2*(mNumT-2)+s*2;
			}
			if (s < mNumS-2) {												//bottom right/top right neighbor face
				mEdge[cur_edge++] = (mNumS-1)*2*t+(s+1)*2;
			}
			else if (flat_face || mVolumep->getProfile().isOpen() == TRUE) { //no neighbor
				mEdge[cur_edge++] = -1;
			}
			else { //wrap on S
				mEdge[cur_edge++] = (mNumS-1)*2*t;
			}
            mEdge[cur_edge++] = (mNumS-1)*2*t+s*2;							//top right/bottom left neighbor face	
		}
	}


	//generate normals
	for (U32 i = 0; i < mIndices.size()/3; i++) {	//for each triangle
		const VertexData& v0 = mVertices[mIndices[i*3+0]];
		const VertexData& v1 = mVertices[mIndices[i*3+1]];
		const VertexData& v2 = mVertices[mIndices[i*3+2]];
					
		//calculate triangle normal
		LLVector3 norm = (v0.mPosition-v1.mPosition)%
						(v0.mPosition-v2.mPosition);

		//calculate binormal
		LLVector3 binorm = calc_binormal_from_triangle(v0.mPosition, v0.mTexCoord,
														v1.mPosition, v1.mTexCoord,
														v2.mPosition, v2.mTexCoord);

		for (U32 j = 0; j < 3; j++) { //add triangle normal to vertices
			mVertices[mIndices[i*3+j]].mNormal += norm; // * (weight_sum - d[j])/weight_sum;
			mVertices[mIndices[i*3+j]].mBinormal += binorm; // * (weight_sum - d[j])/weight_sum;
		}

		//even out quad contributions
		if (i % 2 == 0) {
			mVertices[mIndices[i*3+2]].mNormal += norm;
			mVertices[mIndices[i*3+2]].mBinormal += binorm;
		}
		else {
			mVertices[mIndices[i*3+1]].mNormal += norm;
			mVertices[mIndices[i*3+1]].mBinormal += binorm;
		}
	}

	BOOL s_bottom_converges = ((mVertices[0].mPosition - mVertices[mNumS*(mNumT-2)].mPosition).magVecSquared() < 0.000001f);
	BOOL s_top_converges = ((mVertices[mNumS-1].mPosition - mVertices[mNumS*(mNumT-2)+mNumS-1].mPosition).magVecSquared() < 0.000001f);
	
	if (mVolumep->getPath().isOpen() == FALSE) { //wrap normals on T
		for (S32 i = 0; i < mNumS; i++) {
			LLVector3 norm = mVertices[i].mNormal + mVertices[mNumS*(mNumT-1)+i].mNormal;
			mVertices[i].mNormal = norm;
			mVertices[mNumS*(mNumT-1)+i].mNormal = norm;
		}
	}

	if ((mVolumep->getProfile().isOpen() == FALSE) &&
		!(s_bottom_converges))
		{ //wrap normals on S
			for (S32 i = 0; i < mNumT; i++) {
				LLVector3 norm = mVertices[mNumS*i].mNormal + mVertices[mNumS*i+mNumS-1].mNormal;
				mVertices[mNumS * i].mNormal = norm;
				mVertices[mNumS * i+mNumS-1].mNormal = norm;
			}
		}
	
	if (mVolumep->getPathType() == LL_PCODE_PATH_CIRCLE &&
		((mVolumep->getProfileType() & LL_PCODE_PROFILE_MASK) == LL_PCODE_PROFILE_CIRCLE_HALF))
	{
		if (s_bottom_converges)
		{ //all lower S have same normal
			for (S32 i = 0; i < mNumT; i++) {
				mVertices[mNumS*i].mNormal = LLVector3(1,0,0);
			}
		}

		if (s_top_converges)
		{ //all upper S have same normal
			for (S32 i = 0; i < mNumT; i++) {
				mVertices[mNumS*i+mNumS-1].mNormal = LLVector3(-1,0,0);
			}
		}
	}

	U8 sculpt_type = mVolumep->getParams().getSculptType();
	
	if (sculpt_type == LL_SCULPT_TYPE_SPHERE)
	{
		// average normals for north pole
		
		LLVector3 average(0.0, 0.0, 0.0);
		for (S32 i = 0; i < mNumS; i++)
		{
			average += mVertices[i].mNormal;
		}

		// set average
		for (S32 i = 0; i < mNumS; i++)
		{
			mVertices[i].mNormal = average;
		}
	}

	
	if (sculpt_type == LL_SCULPT_TYPE_SPHERE)
	{
		// average normals for south pole
		
		LLVector3 average(0.0, 0.0, 0.0);
		for (S32 i = 0; i < mNumS; i++)
		{
			average += mVertices[i + mNumS * (mNumT - 1)].mNormal;
		}

		// set average
		for (S32 i = 0; i < mNumS; i++)
		{
			mVertices[i + mNumS * (mNumT - 1)].mNormal = average;
		}
	}



	//normalize normals and binormals here so the meshes that reference
	//this volume data don't have to
	for (U32 i = 0; i < mVertices.size(); i++) 
	{
		mVertices[i].mNormal.normVec();
		mVertices[i].mBinormal.normVec();
	}

	return TRUE;
}

// Static			
BOOL LLVolumeFace::updateColors(LLColor4U *old_colors, const S32 num_old, const LLVolumeFace &old_vf,
								LLStrider<LLColor4U> &new_colors, const S32 num_new, const LLVolumeFace &new_vf)
{
	if (new_vf.mTypeMask & CAP_MASK)
	{
		// These aren't interpolated correctly.  Need to fix when shadows go in...
		F32 ratio = (F32)num_old / (F32)num_new;
		S32 v = 0;
		for (v = 0; v < num_new; v++)
		{
			new_colors[v] = old_colors[(S32)(v*ratio)];
		}
		return FALSE;
	}
	else if (new_vf.mTypeMask & END_MASK)
	{
		// These aren't interpolated correctly.  Need to fix when shadows go in...
		F32 ratio = (F32)num_old / (F32)num_new;
		S32 v = 0;
		for (v = 0; v < num_new; v++)
		{
			new_colors[v] = old_colors[(S32)(v*ratio)];
		}
		return FALSE;
	}
	else if (new_vf.mTypeMask & SIDE_MASK)
	{
		S32 s, t;
		F32 s_ratio = (F32)old_vf.mNumS / (F32)new_vf.mNumS;
		F32 t_ratio = (F32)old_vf.mNumT / (F32)new_vf.mNumT;

		S32 v = 0;
		for (t = 0; t < new_vf.mNumT; t++)
		{
			F32 t_frac = t * t_ratio;
			S32 old_t = (S32)t_frac;
			S32 t_target = llmin(old_t + 1, (old_vf.mNumT - 1));
			t_frac -= old_t;
			for (s = 0; s < new_vf.mNumS; s++)
			{
				F32 s_frac = s * s_ratio;
				S32 old_s = (S32)s_frac;
				S32 s_target = llmin(old_s + 1, (old_vf.mNumS - 1));
				s_frac -= old_s;

				// Interpolate along s, then along t.
				LLColor4U s_interp0 = old_colors[old_t *  old_vf.mNumS + old_s].multAll(1.f - s_frac).addClampMax(old_colors[old_t * old_vf.mNumS + s_target].multAll(s_frac));
				LLColor4U s_interp1 = old_colors[t_target *  old_vf.mNumS + old_s].multAll(1.f - s_frac).addClampMax(old_colors[t_target * old_vf.mNumS + s_target].multAll(s_frac));
				new_colors[v] = s_interp0.multAll(1.f - t_frac).addClampMax(s_interp1.multAll(t_frac));
				v++;
			}
		}
	}
	else
	{
		llerrs << "Unknown/uninitialized face type!" << llendl;
		return FALSE;
	}
	return TRUE;
}


// Finds binormal based on three vertices with texture coordinates.
// Fills in dummy values if the triangle has degenerate texture coordinates.
LLVector3 calc_binormal_from_triangle( 
	const LLVector3& pos0,
	const LLVector2& tex0,
	const LLVector3& pos1,
	const LLVector2& tex1,
	const LLVector3& pos2,
	const LLVector2& tex2)
{
	LLVector3 rx0( pos0.mV[VX], tex0.mV[VX], tex0.mV[VY] );
	LLVector3 rx1( pos1.mV[VX], tex1.mV[VX], tex1.mV[VY] );
	LLVector3 rx2( pos2.mV[VX], tex2.mV[VX], tex2.mV[VY] );
	
	LLVector3 ry0( pos0.mV[VY], tex0.mV[VX], tex0.mV[VY] );
	LLVector3 ry1( pos1.mV[VY], tex1.mV[VX], tex1.mV[VY] );
	LLVector3 ry2( pos2.mV[VY], tex2.mV[VX], tex2.mV[VY] );

	LLVector3 rz0( pos0.mV[VZ], tex0.mV[VX], tex0.mV[VY] );
	LLVector3 rz1( pos1.mV[VZ], tex1.mV[VX], tex1.mV[VY] );
	LLVector3 rz2( pos2.mV[VZ], tex2.mV[VX], tex2.mV[VY] );
	
	LLVector3 r0 = (rx0 - rx1) % (rx0 - rx2);
	LLVector3 r1 = (ry0 - ry1) % (ry0 - ry2);
	LLVector3 r2 = (rz0 - rz1) % (rz0 - rz2);

	if( r0.mV[VX] && r1.mV[VX] && r2.mV[VX] )
	{
		LLVector3 binormal(
				-r0.mV[VZ] / r0.mV[VX],
				-r1.mV[VZ] / r1.mV[VX],
				-r2.mV[VZ] / r2.mV[VX]);
		// binormal.normVec();
		return binormal;
	}
	else
	{
		return LLVector3( 0, 1 , 0 );
	}
}