From 959831f4ef5a3e797f576c3de08cd65032c997ad Mon Sep 17 00:00:00 2001 From: David Walter Seikel Date: Sun, 13 Jan 2013 18:54:10 +1000 Subject: Remove damned ancient DOS line endings from Irrlicht. Hopefully I did not go overboard. --- .../source/Irrlicht/jpeglib/filelist.txt | 430 ++++++++++----------- 1 file changed, 215 insertions(+), 215 deletions(-) (limited to 'libraries/irrlicht-1.8/source/Irrlicht/jpeglib/filelist.txt') diff --git a/libraries/irrlicht-1.8/source/Irrlicht/jpeglib/filelist.txt b/libraries/irrlicht-1.8/source/Irrlicht/jpeglib/filelist.txt index 040abff..7e05386 100644 --- a/libraries/irrlicht-1.8/source/Irrlicht/jpeglib/filelist.txt +++ b/libraries/irrlicht-1.8/source/Irrlicht/jpeglib/filelist.txt @@ -1,215 +1,215 @@ -IJG JPEG LIBRARY: FILE LIST - -Copyright (C) 1994-2009, Thomas G. Lane, Guido Vollbeding. -This file is part of the Independent JPEG Group's software. -For conditions of distribution and use, see the accompanying README file. - - -Here is a road map to the files in the IJG JPEG distribution. The -distribution includes the JPEG library proper, plus two application -programs ("cjpeg" and "djpeg") which use the library to convert JPEG -files to and from some other popular image formats. A third application -"jpegtran" uses the library to do lossless conversion between different -variants of JPEG. There are also two stand-alone applications, -"rdjpgcom" and "wrjpgcom". - - -THE JPEG LIBRARY -================ - -Include files: - -jpeglib.h JPEG library's exported data and function declarations. -jconfig.h Configuration declarations. Note: this file is not present - in the distribution; it is generated during installation. -jmorecfg.h Additional configuration declarations; need not be changed - for a standard installation. -jerror.h Declares JPEG library's error and trace message codes. -jinclude.h Central include file used by all IJG .c files to reference - system include files. -jpegint.h JPEG library's internal data structures. -jdct.h Private declarations for forward & reverse DCT subsystems. -jmemsys.h Private declarations for memory management subsystem. -jversion.h Version information. - -Applications using the library should include jpeglib.h (which in turn -includes jconfig.h and jmorecfg.h). Optionally, jerror.h may be included -if the application needs to reference individual JPEG error codes. The -other include files are intended for internal use and would not normally -be included by an application program. (cjpeg/djpeg/etc do use jinclude.h, -since its function is to improve portability of the whole IJG distribution. -Most other applications will directly include the system include files they -want, and hence won't need jinclude.h.) - - -C source code files: - -These files contain most of the functions intended to be called directly by -an application program: - -jcapimin.c Application program interface: core routines for compression. -jcapistd.c Application program interface: standard compression. -jdapimin.c Application program interface: core routines for decompression. -jdapistd.c Application program interface: standard decompression. -jcomapi.c Application program interface routines common to compression - and decompression. -jcparam.c Compression parameter setting helper routines. -jctrans.c API and library routines for transcoding compression. -jdtrans.c API and library routines for transcoding decompression. - -Compression side of the library: - -jcinit.c Initialization: determines which other modules to use. -jcmaster.c Master control: setup and inter-pass sequencing logic. -jcmainct.c Main buffer controller (preprocessor => JPEG compressor). -jcprepct.c Preprocessor buffer controller. -jccoefct.c Buffer controller for DCT coefficient buffer. -jccolor.c Color space conversion. -jcsample.c Downsampling. -jcdctmgr.c DCT manager (DCT implementation selection & control). -jfdctint.c Forward DCT using slow-but-accurate integer method. -jfdctfst.c Forward DCT using faster, less accurate integer method. -jfdctflt.c Forward DCT using floating-point arithmetic. -jchuff.c Huffman entropy coding. -jcarith.c Arithmetic entropy coding. -jcmarker.c JPEG marker writing. -jdatadst.c Data destination managers for memory and stdio output. - -Decompression side of the library: - -jdmaster.c Master control: determines which other modules to use. -jdinput.c Input controller: controls input processing modules. -jdmainct.c Main buffer controller (JPEG decompressor => postprocessor). -jdcoefct.c Buffer controller for DCT coefficient buffer. -jdpostct.c Postprocessor buffer controller. -jdmarker.c JPEG marker reading. -jdhuff.c Huffman entropy decoding. -jdarith.c Arithmetic entropy decoding. -jddctmgr.c IDCT manager (IDCT implementation selection & control). -jidctint.c Inverse DCT using slow-but-accurate integer method. -jidctfst.c Inverse DCT using faster, less accurate integer method. -jidctflt.c Inverse DCT using floating-point arithmetic. -jdsample.c Upsampling. -jdcolor.c Color space conversion. -jdmerge.c Merged upsampling/color conversion (faster, lower quality). -jquant1.c One-pass color quantization using a fixed-spacing colormap. -jquant2.c Two-pass color quantization using a custom-generated colormap. - Also handles one-pass quantization to an externally given map. -jdatasrc.c Data source managers for memory and stdio input. - -Support files for both compression and decompression: - -jaricom.c Tables for common use in arithmetic entropy encoding and - decoding routines. -jerror.c Standard error handling routines (application replaceable). -jmemmgr.c System-independent (more or less) memory management code. -jutils.c Miscellaneous utility routines. - -jmemmgr.c relies on a system-dependent memory management module. The IJG -distribution includes the following implementations of the system-dependent -module: - -jmemnobs.c "No backing store": assumes adequate virtual memory exists. -jmemansi.c Makes temporary files with ANSI-standard routine tmpfile(). -jmemname.c Makes temporary files with program-generated file names. -jmemdos.c Custom implementation for MS-DOS (16-bit environment only): - can use extended and expanded memory as well as temp files. -jmemmac.c Custom implementation for Apple Macintosh. - -Exactly one of the system-dependent modules should be configured into an -installed JPEG library (see install.txt for hints about which one to use). -On unusual systems you may find it worthwhile to make a special -system-dependent memory manager. - - -Non-C source code files: - -jmemdosa.asm 80x86 assembly code support for jmemdos.c; used only in - MS-DOS-specific configurations of the JPEG library. - - -CJPEG/DJPEG/JPEGTRAN -==================== - -Include files: - -cdjpeg.h Declarations shared by cjpeg/djpeg/jpegtran modules. -cderror.h Additional error and trace message codes for cjpeg et al. -transupp.h Declarations for jpegtran support routines in transupp.c. - -C source code files: - -cjpeg.c Main program for cjpeg. -djpeg.c Main program for djpeg. -jpegtran.c Main program for jpegtran. -cdjpeg.c Utility routines used by all three programs. -rdcolmap.c Code to read a colormap file for djpeg's "-map" switch. -rdswitch.c Code to process some of cjpeg's more complex switches. - Also used by jpegtran. -transupp.c Support code for jpegtran: lossless image manipulations. - -Image file reader modules for cjpeg: - -rdbmp.c BMP file input. -rdgif.c GIF file input (now just a stub). -rdppm.c PPM/PGM file input. -rdrle.c Utah RLE file input. -rdtarga.c Targa file input. - -Image file writer modules for djpeg: - -wrbmp.c BMP file output. -wrgif.c GIF file output (a mere shadow of its former self). -wrppm.c PPM/PGM file output. -wrrle.c Utah RLE file output. -wrtarga.c Targa file output. - - -RDJPGCOM/WRJPGCOM -================= - -C source code files: - -rdjpgcom.c Stand-alone rdjpgcom application. -wrjpgcom.c Stand-alone wrjpgcom application. - -These programs do not depend on the IJG library. They do use -jconfig.h and jinclude.h, only to improve portability. - - -ADDITIONAL FILES -================ - -Documentation (see README for a guide to the documentation files): - -README Master documentation file. -*.txt Other documentation files. -*.1 Documentation in Unix man page format. -change.log Version-to-version change highlights. -example.c Sample code for calling JPEG library. - -Configuration/installation files and programs (see install.txt for more info): - -configure Unix shell script to perform automatic configuration. -configure.ac Source file for use with Autoconf to generate configure. -ltmain.sh Support scripts for configure (from GNU libtool). -config.guess -config.sub -depcomp -missing -install-sh Install shell script for those Unix systems lacking one. -Makefile.in Makefile input for configure. -Makefile.am Source file for use with Automake to generate Makefile.in. -ckconfig.c Program to generate jconfig.h on non-Unix systems. -jconfig.txt Template for making jconfig.h by hand. -mak*.* Sample makefiles for particular systems. -jconfig.* Sample jconfig.h for particular systems. -libjpeg.map Script to generate shared library with versioned symbols. -aclocal.m4 M4 macro definitions for use with Autoconf. -ansi2knr.c De-ANSIfier for pre-ANSI C compilers (courtesy of - L. Peter Deutsch and Aladdin Enterprises). - -Test files (see install.txt for test procedure): - -test*.* Source and comparison files for confidence test. - These are binary image files, NOT text files. +IJG JPEG LIBRARY: FILE LIST + +Copyright (C) 1994-2009, Thomas G. Lane, Guido Vollbeding. +This file is part of the Independent JPEG Group's software. +For conditions of distribution and use, see the accompanying README file. + + +Here is a road map to the files in the IJG JPEG distribution. The +distribution includes the JPEG library proper, plus two application +programs ("cjpeg" and "djpeg") which use the library to convert JPEG +files to and from some other popular image formats. A third application +"jpegtran" uses the library to do lossless conversion between different +variants of JPEG. There are also two stand-alone applications, +"rdjpgcom" and "wrjpgcom". + + +THE JPEG LIBRARY +================ + +Include files: + +jpeglib.h JPEG library's exported data and function declarations. +jconfig.h Configuration declarations. Note: this file is not present + in the distribution; it is generated during installation. +jmorecfg.h Additional configuration declarations; need not be changed + for a standard installation. +jerror.h Declares JPEG library's error and trace message codes. +jinclude.h Central include file used by all IJG .c files to reference + system include files. +jpegint.h JPEG library's internal data structures. +jdct.h Private declarations for forward & reverse DCT subsystems. +jmemsys.h Private declarations for memory management subsystem. +jversion.h Version information. + +Applications using the library should include jpeglib.h (which in turn +includes jconfig.h and jmorecfg.h). Optionally, jerror.h may be included +if the application needs to reference individual JPEG error codes. The +other include files are intended for internal use and would not normally +be included by an application program. (cjpeg/djpeg/etc do use jinclude.h, +since its function is to improve portability of the whole IJG distribution. +Most other applications will directly include the system include files they +want, and hence won't need jinclude.h.) + + +C source code files: + +These files contain most of the functions intended to be called directly by +an application program: + +jcapimin.c Application program interface: core routines for compression. +jcapistd.c Application program interface: standard compression. +jdapimin.c Application program interface: core routines for decompression. +jdapistd.c Application program interface: standard decompression. +jcomapi.c Application program interface routines common to compression + and decompression. +jcparam.c Compression parameter setting helper routines. +jctrans.c API and library routines for transcoding compression. +jdtrans.c API and library routines for transcoding decompression. + +Compression side of the library: + +jcinit.c Initialization: determines which other modules to use. +jcmaster.c Master control: setup and inter-pass sequencing logic. +jcmainct.c Main buffer controller (preprocessor => JPEG compressor). +jcprepct.c Preprocessor buffer controller. +jccoefct.c Buffer controller for DCT coefficient buffer. +jccolor.c Color space conversion. +jcsample.c Downsampling. +jcdctmgr.c DCT manager (DCT implementation selection & control). +jfdctint.c Forward DCT using slow-but-accurate integer method. +jfdctfst.c Forward DCT using faster, less accurate integer method. +jfdctflt.c Forward DCT using floating-point arithmetic. +jchuff.c Huffman entropy coding. +jcarith.c Arithmetic entropy coding. +jcmarker.c JPEG marker writing. +jdatadst.c Data destination managers for memory and stdio output. + +Decompression side of the library: + +jdmaster.c Master control: determines which other modules to use. +jdinput.c Input controller: controls input processing modules. +jdmainct.c Main buffer controller (JPEG decompressor => postprocessor). +jdcoefct.c Buffer controller for DCT coefficient buffer. +jdpostct.c Postprocessor buffer controller. +jdmarker.c JPEG marker reading. +jdhuff.c Huffman entropy decoding. +jdarith.c Arithmetic entropy decoding. +jddctmgr.c IDCT manager (IDCT implementation selection & control). +jidctint.c Inverse DCT using slow-but-accurate integer method. +jidctfst.c Inverse DCT using faster, less accurate integer method. +jidctflt.c Inverse DCT using floating-point arithmetic. +jdsample.c Upsampling. +jdcolor.c Color space conversion. +jdmerge.c Merged upsampling/color conversion (faster, lower quality). +jquant1.c One-pass color quantization using a fixed-spacing colormap. +jquant2.c Two-pass color quantization using a custom-generated colormap. + Also handles one-pass quantization to an externally given map. +jdatasrc.c Data source managers for memory and stdio input. + +Support files for both compression and decompression: + +jaricom.c Tables for common use in arithmetic entropy encoding and + decoding routines. +jerror.c Standard error handling routines (application replaceable). +jmemmgr.c System-independent (more or less) memory management code. +jutils.c Miscellaneous utility routines. + +jmemmgr.c relies on a system-dependent memory management module. The IJG +distribution includes the following implementations of the system-dependent +module: + +jmemnobs.c "No backing store": assumes adequate virtual memory exists. +jmemansi.c Makes temporary files with ANSI-standard routine tmpfile(). +jmemname.c Makes temporary files with program-generated file names. +jmemdos.c Custom implementation for MS-DOS (16-bit environment only): + can use extended and expanded memory as well as temp files. +jmemmac.c Custom implementation for Apple Macintosh. + +Exactly one of the system-dependent modules should be configured into an +installed JPEG library (see install.txt for hints about which one to use). +On unusual systems you may find it worthwhile to make a special +system-dependent memory manager. + + +Non-C source code files: + +jmemdosa.asm 80x86 assembly code support for jmemdos.c; used only in + MS-DOS-specific configurations of the JPEG library. + + +CJPEG/DJPEG/JPEGTRAN +==================== + +Include files: + +cdjpeg.h Declarations shared by cjpeg/djpeg/jpegtran modules. +cderror.h Additional error and trace message codes for cjpeg et al. +transupp.h Declarations for jpegtran support routines in transupp.c. + +C source code files: + +cjpeg.c Main program for cjpeg. +djpeg.c Main program for djpeg. +jpegtran.c Main program for jpegtran. +cdjpeg.c Utility routines used by all three programs. +rdcolmap.c Code to read a colormap file for djpeg's "-map" switch. +rdswitch.c Code to process some of cjpeg's more complex switches. + Also used by jpegtran. +transupp.c Support code for jpegtran: lossless image manipulations. + +Image file reader modules for cjpeg: + +rdbmp.c BMP file input. +rdgif.c GIF file input (now just a stub). +rdppm.c PPM/PGM file input. +rdrle.c Utah RLE file input. +rdtarga.c Targa file input. + +Image file writer modules for djpeg: + +wrbmp.c BMP file output. +wrgif.c GIF file output (a mere shadow of its former self). +wrppm.c PPM/PGM file output. +wrrle.c Utah RLE file output. +wrtarga.c Targa file output. + + +RDJPGCOM/WRJPGCOM +================= + +C source code files: + +rdjpgcom.c Stand-alone rdjpgcom application. +wrjpgcom.c Stand-alone wrjpgcom application. + +These programs do not depend on the IJG library. They do use +jconfig.h and jinclude.h, only to improve portability. + + +ADDITIONAL FILES +================ + +Documentation (see README for a guide to the documentation files): + +README Master documentation file. +*.txt Other documentation files. +*.1 Documentation in Unix man page format. +change.log Version-to-version change highlights. +example.c Sample code for calling JPEG library. + +Configuration/installation files and programs (see install.txt for more info): + +configure Unix shell script to perform automatic configuration. +configure.ac Source file for use with Autoconf to generate configure. +ltmain.sh Support scripts for configure (from GNU libtool). +config.guess +config.sub +depcomp +missing +install-sh Install shell script for those Unix systems lacking one. +Makefile.in Makefile input for configure. +Makefile.am Source file for use with Automake to generate Makefile.in. +ckconfig.c Program to generate jconfig.h on non-Unix systems. +jconfig.txt Template for making jconfig.h by hand. +mak*.* Sample makefiles for particular systems. +jconfig.* Sample jconfig.h for particular systems. +libjpeg.map Script to generate shared library with versioned symbols. +aclocal.m4 M4 macro definitions for use with Autoconf. +ansi2knr.c De-ANSIfier for pre-ANSI C compilers (courtesy of + L. Peter Deutsch and Aladdin Enterprises). + +Test files (see install.txt for test procedure): + +test*.* Source and comparison files for confidence test. + These are binary image files, NOT text files. -- cgit v1.1