From 6523585c66c04cea54df50013df8886b589847d8 Mon Sep 17 00:00:00 2001
From: David Walter Seikel
Date: Mon, 23 Jan 2012 23:36:30 +1000
Subject: Add luaproc and LuaJIT libraries.

Two versions of LuaJIT, the stable release, and the dev version.  Try the dev version first, until ih fails badly.
---
 libraries/LuaJIT-1.1.7/Makefile | 130 ++++++++++++++++++++++++++++++++++++++++
 1 file changed, 130 insertions(+)
 create mode 100644 libraries/LuaJIT-1.1.7/Makefile

(limited to 'libraries/LuaJIT-1.1.7/Makefile')

diff --git a/libraries/LuaJIT-1.1.7/Makefile b/libraries/LuaJIT-1.1.7/Makefile
new file mode 100644
index 0000000..727ccc4
--- /dev/null
+++ b/libraries/LuaJIT-1.1.7/Makefile
@@ -0,0 +1,130 @@
+# makefile for installing Lua
+# see INSTALL for installation instructions
+# see src/Makefile and src/luaconf.h for further customization
+
+# == CHANGE THE SETTINGS BELOW TO SUIT YOUR ENVIRONMENT =======================
+
+# Your platform. See PLATS for possible values.
+PLAT= none
+
+# Where to install. The installation starts in the src and doc directories,
+# so take care if INSTALL_TOP is not an absolute path.
+INSTALL_TOP= /usr/local
+INSTALL_BIN= $(INSTALL_TOP)/bin
+INSTALL_INC= $(INSTALL_TOP)/include
+INSTALL_LIB= $(INSTALL_TOP)/lib
+INSTALL_MAN= $(INSTALL_TOP)/man/man1
+#
+# You probably want to make INSTALL_LMOD and INSTALL_CMOD consistent with
+# LUA_ROOT, LUA_LDIR, and LUA_CDIR in luaconf.h (and also with etc/luajit.pc).
+INSTALL_LMOD= $(INSTALL_TOP)/share/lua/$V
+INSTALL_CMOD= $(INSTALL_TOP)/lib/lua/$V
+
+# How to install. If your install program does not support "-p", then you
+# may have to run ranlib on the installed liblua.a (do "make ranlib").
+INSTALL= install -p
+INSTALL_EXEC= $(INSTALL) -m 0755
+INSTALL_DATA= $(INSTALL) -m 0644
+#
+# If you don't have install you can use cp instead.
+# INSTALL= cp -p
+# INSTALL_EXEC= $(INSTALL)
+# INSTALL_DATA= $(INSTALL)
+
+# Utilities.
+MKDIR= mkdir -p
+RANLIB= ranlib
+
+# == END OF USER SETTINGS. NO NEED TO CHANGE ANYTHING BELOW THIS LINE =========
+
+# Convenience platforms targets.
+PLATS= linux bsd macosx solaris mingw cygwin posix generic linux_rl bsd_rl macosx_rl
+
+# What to install.
+TO_BIN= luajit
+###TO_INC= lua.h luaconf.h lualib.h lauxlib.h ../etc/lua.hpp
+###TO_LIB= liblua.a
+###TO_MAN= lua.1 luac.1
+
+# Lua version and release.
+V= 5.1
+R= 5.1.4
+# LuaJIT version.
+JV= 1.1.7
+
+all:	$(PLAT)
+
+$(PLATS) clean:
+	cd src && $(MAKE) $@
+
+test:	dummy
+	src/luajit -O -e 'io.write("Hello world, from ", jit.version, "!\n")'
+
+install: dummy
+	cd src && $(MKDIR) $(INSTALL_BIN) $(INSTALL_INC) $(INSTALL_LIB) $(INSTALL_MAN) $(INSTALL_LMOD) $(INSTALL_CMOD) $(INSTALL_LMOD)/jit
+	cd src && $(INSTALL_EXEC) $(TO_BIN) $(INSTALL_BIN)
+	###cd src && $(INSTALL_DATA) $(TO_INC) $(INSTALL_INC)
+	###cd src && $(INSTALL_DATA) $(TO_LIB) $(INSTALL_LIB)
+	###cd doc && $(INSTALL_DATA) $(TO_MAN) $(INSTALL_MAN)
+	cd jit && $(INSTALL_DATA) *.lua $(INSTALL_LMOD)/jit
+
+ranlib:
+	cd src && cd $(INSTALL_LIB) && $(RANLIB) $(TO_LIB)
+
+none:
+	@echo "Please do"
+	@echo "   make PLATFORM"
+	@echo "where PLATFORM is one of these:"
+	@echo "   $(PLATS)"
+	@echo "See jitdoc/luajit_install.html for complete instructions."
+
+# make may get confused with test/ and INSTALL in a case-insensitive OS
+dummy:
+
+# echo config parameters
+echo:
+	@echo ""
+	@echo "These are the parameters currently set in src/Makefile to build LuaJIT $(JV):"
+	@echo ""
+	@cd src && $(MAKE) -s echo
+	@echo ""
+	@echo "These are the parameters currently set in Makefile to install LuaJIT $(JV):"
+	@echo ""
+	@echo "PLAT = $(PLAT)"
+	@echo "INSTALL_TOP = $(INSTALL_TOP)"
+	@echo "INSTALL_BIN = $(INSTALL_BIN)"
+	@echo "INSTALL_INC = $(INSTALL_INC)"
+	@echo "INSTALL_LIB = $(INSTALL_LIB)"
+	@echo "INSTALL_MAN = $(INSTALL_MAN)"
+	@echo "INSTALL_LMOD = $(INSTALL_LMOD)"
+	@echo "INSTALL_CMOD = $(INSTALL_CMOD)"
+	@echo "INSTALL_EXEC = $(INSTALL_EXEC)"
+	@echo "INSTALL_DATA = $(INSTALL_DATA)"
+	@echo ""
+	@echo "See also src/luaconf.h ."
+	@echo ""
+
+# echo private config parameters
+pecho:
+	@echo "V = $(V)"
+	@echo "R = $(R)"
+	@echo "JV = $(JV)"
+	@echo "TO_BIN = $(TO_BIN)"
+	@echo "TO_INC = $(TO_INC)"
+	@echo "TO_LIB = $(TO_LIB)"
+	@echo "TO_MAN = $(TO_MAN)"
+
+# echo config parameters as Lua code
+# uncomment the last sed expression if you want nil instead of empty strings
+lecho:
+	@echo "-- installation parameters for Lua $(R), LuaJIT $(JV)"
+	@echo "VERSION = '$(V)'"
+	@echo "RELEASE = '$(R)'"
+	@echo "LUAJIT_VERSION = '$(JV)'"
+	@$(MAKE) echo | grep = | sed -e 's/= /= "/' -e 's/$$/"/' #-e 's/""/nil/'
+	@echo "-- EOF"
+
+# list targets that do not create files (but not all makes understand .PHONY)
+.PHONY: all $(PLATS) clean test install local none dummy echo pecho lecho
+
+# (end of Makefile)
-- 
cgit v1.1