1 files changed, 516 insertions, 0 deletions

diff --git a/src/others/mimesh/libg3d-0.0.8/doc/Makefile b/src/others/mimesh/libg3d-0.0.8/doc/Makefile
new file mode 100644
index 0000000..a567252
--- /dev/null
+++ b/src/others/mimesh/libg3d-0.0.8/doc/Makefile
@@ -0,0 +1,516 @@
+# Makefile.in generated by automake 1.10.1 from Makefile.am.
+# doc/Makefile.  Generated from Makefile.in by configure.
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+
+
+pkgdatadir = $(datadir)/libg3d
+pkglibdir = $(libdir)/libg3d
+pkgincludedir = $(includedir)/libg3d
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = x86_64-unknown-linux-gnu
+host_triplet = x86_64-unknown-linux-gnu
+subdir = doc
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/acinclude.m4 \
+        $(top_srcdir)/m4/glib-2.0.m4 $(top_srcdir)/m4/gtk-2.0.m4 \
+        $(top_srcdir)/m4/gtk-doc.m4 $(top_srcdir)/m4/libtool.m4 \
+        $(top_srcdir)/m4/libxml2.m4 $(top_srcdir)/m4/win32.m4 \
+        $(top_srcdir)/configure.in
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+        $(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/include/g3d/config.h
+CONFIG_CLEAN_FILES =
+SOURCES =
+DIST_SOURCES =
+RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
+        html-recursive info-recursive install-data-recursive \
+        install-dvi-recursive install-exec-recursive \
+        install-html-recursive install-info-recursive \
+        install-pdf-recursive install-ps-recursive install-recursive \
+        installcheck-recursive installdirs-recursive pdf-recursive \
+        ps-recursive uninstall-recursive
+RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
+  distclean-recursive maintainer-clean-recursive
+ETAGS = etags
+CTAGS = ctags
+DIST_SUBDIRS = $(SUBDIRS)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = ${SHELL} /home/dvs1/VirtualWorlds/SOURCE/SledjHamr/src/others/mimesh/libg3d-0.0.8/config/missing --run aclocal-1.10
+AMTAR = ${SHELL} /home/dvs1/VirtualWorlds/SOURCE/SledjHamr/src/others/mimesh/libg3d-0.0.8/config/missing --run tar
+AR = ar
+AS = as
+AUTOCONF = ${SHELL} /home/dvs1/VirtualWorlds/SOURCE/SledjHamr/src/others/mimesh/libg3d-0.0.8/config/missing --run autoconf
+AUTOHEADER = ${SHELL} /home/dvs1/VirtualWorlds/SOURCE/SledjHamr/src/others/mimesh/libg3d-0.0.8/config/missing --run autoheader
+AUTOMAKE = ${SHELL} /home/dvs1/VirtualWorlds/SOURCE/SledjHamr/src/others/mimesh/libg3d-0.0.8/config/missing --run automake-1.10
+AWK = gawk
+CC = gcc
+CCDEPMODE = depmode=gcc3
+CFLAGS = -g -O2
+CPP = gcc -E
+CPPFLAGS = 
+CXX = g++
+CXXCPP = g++ -E
+CXXDEPMODE = depmode=gcc3
+CXXFLAGS = -g -O2
+CYGPATH_W = echo
+DBG_CFLAGS = -O2 
+DEBUG = 0
+DEFS = -DHAVE_CONFIG_H
+DEPDIR = .deps
+DLLTOOL = dlltool
+ECHO = echo
+ECHO_C = 
+ECHO_N = -n
+ECHO_T = 
+EGREP = /bin/grep -E
+EXEEXT = 
+F77 = 
+FFLAGS = 
+GDKPIXBUF_CFLAGS = -pthread -I/usr/include/gtk-2.0 -I/usr/lib/x86_64-linux-gnu/gtk-2.0/include -I/usr/include/atk-1.0 -I/usr/include/cairo -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/pango-1.0 -I/usr/include/gio-unix-2.0/ -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/freetype2 -I/usr/include/libpng12  
+GDKPIXBUF_LIBS = -lgtk-x11-2.0 -lgdk-x11-2.0 -latk-1.0 -lgio-2.0 -lpangoft2-1.0 -lpangocairo-1.0 -lgdk_pixbuf-2.0 -lcairo -lpango-1.0 -lfreetype -lfontconfig -lgobject-2.0 -lglib-2.0  
+GLIB_CFLAGS = -pthread -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include  
+GLIB_GENMARSHAL = glib-genmarshal
+GLIB_LIBS = -Wl,--export-dynamic -pthread -lgmodule-2.0 -lrt -lgobject-2.0 -lglib-2.0  
+GLIB_MKENUMS = glib-mkenums
+GOBJECT_QUERY = gobject-query
+GREP = /bin/grep
+GTKDOC_CHECK = /usr/bin/gtkdoc-check
+GTK_CFLAGS = -pthread -I/usr/include/gtk-2.0 -I/usr/lib/x86_64-linux-gnu/gtk-2.0/include -I/usr/include/atk-1.0 -I/usr/include/cairo -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/pango-1.0 -I/usr/include/gio-unix-2.0/ -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/freetype2 -I/usr/include/libpng12  
+GTK_LIBS = -lgtk-x11-2.0 -lgdk-x11-2.0 -latk-1.0 -lgio-2.0 -lpangoft2-1.0 -lpangocairo-1.0 -lgdk_pixbuf-2.0 -lcairo -lpango-1.0 -lfreetype -lfontconfig -lgobject-2.0 -lglib-2.0  
+HTML_DIR = ${datadir}/gtk-doc/html
+INSTALL = /usr/bin/install -c
+INSTALL_DATA = ${INSTALL} -m 644
+INSTALL_PROGRAM = ${INSTALL}
+INSTALL_SCRIPT = ${INSTALL}
+INSTALL_STRIP_PROGRAM = $(install_sh) -c -s
+LDFLAGS = 
+LEX = flex
+LEXLIB = -lfl
+LEX_OUTPUT_ROOT = lex.yy
+LIBGSF_CFLAGS = -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include -I/usr/include/libxml2 -I/usr/include/libgsf-1  
+LIBGSF_LIBS = -lgsf-1 -lgobject-2.0 -lxml2 -lglib-2.0  
+LIBOBJS = 
+LIBS = -lm 
+LIBTOOL = $(SHELL) $(top_builddir)/libtool
+LIBXML2_CFLAGS = -I/usr/include/libxml2
+LIBXML2_LIBS = -L/usr/lib/x86_64-linux-gnu -lxml2
+LN_S = ln -s
+LTLIBOBJS = 
+LTVERSION = 0:8:0
+MAGIC_LIBS = -lmagic
+MAKEINFO = ${SHELL} /home/dvs1/VirtualWorlds/SOURCE/SledjHamr/src/others/mimesh/libg3d-0.0.8/config/missing --run makeinfo
+MATH_LIBS = -lm
+MKDIR_P = /bin/mkdir -p
+OBJDUMP = objdump
+OBJEXT = o
+PACKAGE = libg3d
+PACKAGE_BUGREPORT = 
+PACKAGE_NAME = 
+PACKAGE_STRING = 
+PACKAGE_TARNAME = 
+PACKAGE_VERSION = 
+PATH_SEPARATOR = :
+PKG_CONFIG = /usr/bin/pkg-config
+PLUGINS_LDFLAGS = -avoid-version -export-dynamic
+RANLIB = ranlib
+SET_MAKE = 
+SHELL = /bin/bash
+STRIP = strip
+VERSION = 0.0.8
+XML2_CONFIG = /usr/bin/xml2-config
+XML_CPPFLAGS = -I/usr/include/libxml2
+XML_LIBS = -L/usr/lib/x86_64-linux-gnu -lxml2
+Z_CFLAGS = 
+Z_LIBS = -lz
+abs_builddir = /home/dvs1/VirtualWorlds/SOURCE/SledjHamr/src/others/mimesh/libg3d-0.0.8/doc
+abs_srcdir = /home/dvs1/VirtualWorlds/SOURCE/SledjHamr/src/others/mimesh/libg3d-0.0.8/doc
+abs_top_builddir = /home/dvs1/VirtualWorlds/SOURCE/SledjHamr/src/others/mimesh/libg3d-0.0.8
+abs_top_srcdir = /home/dvs1/VirtualWorlds/SOURCE/SledjHamr/src/others/mimesh/libg3d-0.0.8
+ac_ct_CC = gcc
+ac_ct_CXX = g++
+ac_ct_F77 = 
+am__include = include
+am__leading_dot = .
+am__quote = 
+am__tar = ${AMTAR} chof - "$$tardir"
+am__untar = ${AMTAR} xf -
+bindir = ${exec_prefix}/bin
+build = x86_64-unknown-linux-gnu
+build_alias = 
+build_cpu = x86_64
+build_os = linux-gnu
+build_vendor = unknown
+builddir = .
+datadir = ${datarootdir}
+datarootdir = ${prefix}/share
+docdir = ${datarootdir}/doc/${PACKAGE}
+dvidir = ${docdir}
+exec_prefix = ${prefix}
+host = x86_64-unknown-linux-gnu
+host_alias = 
+host_cpu = x86_64
+host_os = linux-gnu
+host_vendor = unknown
+htmldir = ${docdir}
+includedir = ${prefix}/include
+infodir = ${datarootdir}/info
+install_sh = $(SHELL) /home/dvs1/VirtualWorlds/SOURCE/SledjHamr/src/others/mimesh/libg3d-0.0.8/config/install-sh
+libdir = ${exec_prefix}/lib
+libexecdir = ${exec_prefix}/libexec
+localedir = ${datarootdir}/locale
+localstatedir = ${prefix}/var
+mandir = ${datarootdir}/man
+mkdir_p = /bin/mkdir -p
+oldincludedir = /usr/include
+pdfdir = ${docdir}
+prefix = /usr/local
+program_transform_name = s,x,x,
+psdir = ${docdir}
+sbindir = ${exec_prefix}/sbin
+sharedstatedir = ${prefix}/com
+srcdir = .
+sysconfdir = ${prefix}/etc
+target_alias = 
+top_builddir = ..
+top_srcdir = ..
+SUBDIRS = api support_matrix
+EXTRA_DIST = RELEASE-NOTES-0.0.7.txt RELEASE-NOTES-0.0.8.txt
+all: all-recursive
+
+.SUFFIXES:
+$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
+        @for dep in $?; do \
+          case '$(am__configure_deps)' in \
+            *$$dep*) \
+              cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
+                && exit 0; \
+              exit 1;; \
+          esac; \
+        done; \
+        echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu  doc/Makefile'; \
+        cd $(top_srcdir) && \
+          $(AUTOMAKE) --gnu  doc/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+        @case '$?' in \
+          *config.status*) \
+            cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+          *) \
+            echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+            cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+        esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+        cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure:  $(am__configure_deps)
+        cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
+        cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+mostlyclean-libtool:
+        -rm -f *.lo
+
+clean-libtool:
+        -rm -rf .libs _libs
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+#     (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+$(RECURSIVE_TARGETS):
+        @failcom='exit 1'; \
+        for f in x $$MAKEFLAGS; do \
+          case $$f in \
+            *=* | --[!k]*);; \
+            *k*) failcom='fail=yes';; \
+          esac; \
+        done; \
+        dot_seen=no; \
+        target=`echo $@ | sed s/-recursive//`; \
+        list='$(SUBDIRS)'; for subdir in $$list; do \
+          echo "Making $$target in $$subdir"; \
+          if test "$$subdir" = "."; then \
+            dot_seen=yes; \
+            local_target="$$target-am"; \
+          else \
+            local_target="$$target"; \
+          fi; \
+          (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+          || eval $$failcom; \
+        done; \
+        if test "$$dot_seen" = "no"; then \
+          $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+        fi; test -z "$$fail"
+
+$(RECURSIVE_CLEAN_TARGETS):
+        @failcom='exit 1'; \
+        for f in x $$MAKEFLAGS; do \
+          case $$f in \
+            *=* | --[!k]*);; \
+            *k*) failcom='fail=yes';; \
+          esac; \
+        done; \
+        dot_seen=no; \
+        case "$@" in \
+          distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+          *) list='$(SUBDIRS)' ;; \
+        esac; \
+        rev=''; for subdir in $$list; do \
+          if test "$$subdir" = "."; then :; else \
+            rev="$$subdir $$rev"; \
+          fi; \
+        done; \
+        rev="$$rev ."; \
+        target=`echo $@ | sed s/-recursive//`; \
+        for subdir in $$rev; do \
+          echo "Making $$target in $$subdir"; \
+          if test "$$subdir" = "."; then \
+            local_target="$$target-am"; \
+          else \
+            local_target="$$target"; \
+          fi; \
+          (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+          || eval $$failcom; \
+        done && test -z "$$fail"
+tags-recursive:
+        list='$(SUBDIRS)'; for subdir in $$list; do \
+          test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+        done
+ctags-recursive:
+        list='$(SUBDIRS)'; for subdir in $$list; do \
+          test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
+        done
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+        list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+        unique=`for i in $$list; do \
+            if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+          done | \
+          $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \
+              END { if (nonempty) { for (i in files) print i; }; }'`; \
+        mkid -fID $$unique
+tags: TAGS
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+                $(TAGS_FILES) $(LISP)
+        tags=; \
+        here=`pwd`; \
+        if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+          include_option=--etags-include; \
+          empty_fix=.; \
+        else \
+          include_option=--include; \
+          empty_fix=; \
+        fi; \
+        list='$(SUBDIRS)'; for subdir in $$list; do \
+          if test "$$subdir" = .; then :; else \
+            test ! -f $$subdir/TAGS || \
+              tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
+          fi; \
+        done; \
+        list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+        unique=`for i in $$list; do \
+            if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+          done | \
+          $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+              END { if (nonempty) { for (i in files) print i; }; }'`; \
+        if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+          test -n "$$unique" || unique=$$empty_fix; \
+          $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+            $$tags $$unique; \
+        fi
+ctags: CTAGS
+CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+                $(TAGS_FILES) $(LISP)
+        tags=; \
+        list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+        unique=`for i in $$list; do \
+            if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+          done | \
+          $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+              END { if (nonempty) { for (i in files) print i; }; }'`; \
+        test -z "$(CTAGS_ARGS)$$tags$$unique" \
+          || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+             $$tags $$unique
+
+GTAGS:
+        here=`$(am__cd) $(top_builddir) && pwd` \
+          && cd $(top_srcdir) \
+          && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+        -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(DISTFILES)
+        @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+        topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+        list='$(DISTFILES)'; \
+          dist_files=`for file in $$list; do echo $$file; done | \
+          sed -e "s|^$$srcdirstrip/||;t" \
+              -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+        case $$dist_files in \
+          */*) $(MKDIR_P) `echo "$$dist_files" | \
+                           sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+                           sort -u` ;; \
+        esac; \
+        for file in $$dist_files; do \
+          if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+          if test -d $$d/$$file; then \
+            dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+            if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+              cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+            fi; \
+            cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+          else \
+            test -f $(distdir)/$$file \
+            || cp -p $$d/$$file $(distdir)/$$file \
+            || exit 1; \
+          fi; \
+        done
+        list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+          if test "$$subdir" = .; then :; else \
+            test -d "$(distdir)/$$subdir" \
+            || $(MKDIR_P) "$(distdir)/$$subdir" \
+            || exit 1; \
+            distdir=`$(am__cd) $(distdir) && pwd`; \
+            top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
+            (cd $$subdir && \
+              $(MAKE) $(AM_MAKEFLAGS) \
+                top_distdir="$$top_distdir" \
+                distdir="$$distdir/$$subdir" \
+                am__remove_distdir=: \
+                am__skip_length_check=: \
+                distdir) \
+              || exit 1; \
+          fi; \
+        done
+check-am: all-am
+check: check-recursive
+all-am: Makefile
+installdirs: installdirs-recursive
+installdirs-am:
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+        @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+        $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+          install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+          `test -z '$(STRIP)' || \
+            echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+        -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+        @echo "This command is intended for maintainers to use"
+        @echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-generic clean-libtool mostlyclean-am
+
+distclean: distclean-recursive
+        -rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+info: info-recursive
+
+info-am:
+
+install-data-am:
+
+install-dvi: install-dvi-recursive
+
+install-exec-am:
+
+install-html: install-html-recursive
+
+install-info: install-info-recursive
+
+install-man:
+
+install-pdf: install-pdf-recursive
+
+install-ps: install-ps-recursive
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+        -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am:
+
+.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \
+        install-strip
+
+.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
+        all all-am check check-am clean clean-generic clean-libtool \
+        ctags ctags-recursive distclean distclean-generic \
+        distclean-libtool distclean-tags distdir dvi dvi-am html \
+        html-am info info-am install install-am install-data \
+        install-data-am install-dvi install-dvi-am install-exec \
+        install-exec-am install-html install-html-am install-info \
+        install-info-am install-man install-pdf install-pdf-am \
+        install-ps install-ps-am install-strip installcheck \
+        installcheck-am installdirs installdirs-am maintainer-clean \
+        maintainer-clean-generic mostlyclean mostlyclean-generic \
+        mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \
+        uninstall uninstall-am
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT: