96 files changed, 0 insertions, 74325 deletions

diff --git a/libraries/eet/ABOUT-NLS b/libraries/eet/ABOUT-NLS
deleted file mode 100644
index e69de29..0000000
--- a/libraries/eet/ABOUT-NLS
+++ /dev/null
diff --git a/libraries/eet/AUTHORS b/libraries/eet/AUTHORS
deleted file mode 100644
index 260b216..0000000
--- a/libraries/eet/AUTHORS
+++ /dev/null
@@ -1,14 +0,0 @@
-The Rasterman (Carsten Haitzler) <raster@rasterman.com>
-David Goodlad <dgoodlad@gmail.com>
-Cedric Bail <cedric.bail@free.fr>
-Arnaud de Turckheim <quarium@gmail.com>
-Luis Felipe Strano Moraes <lfelipe@profusion.mobi>
-Chidambar Zinnoury <illogict@online.fr>
-Vincent Torri <vtorri@univ-evry.fr>
-Gustavo Sverzut Barbieri <barbieri@profusion.mobi>
-Raphael Kubo da Costa <kubo@profusion.mobi>
-Mathieu Taillefumier <mathieu.taillefumier@free.fr>
-Albin "Lutin" Tonnerre <albin.tonnerre@gmail.com>
-Adam Simpkins <adam@adamsimpkins.net>
-Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
-Lionel Orry <lionel.orry@gmail.com>
diff --git a/libraries/eet/COPYING b/libraries/eet/COPYING
deleted file mode 100644
index 296efe7..0000000
--- a/libraries/eet/COPYING
+++ /dev/null
@@ -1,25 +0,0 @@
-Copyright notice for Eet:
-
-Copyright (C) 2002-2011 Carsten Haitzler and various contributors (see AUTHORS)
-
-All rights reserved.
-
-Redistribution and use in source and binary forms, with or without
-modification, are permitted provided that the following conditions are met:
-
-   1. Redistributions of source code must retain the above copyright
-      notice, this list of conditions and the following disclaimer.
-   2. Redistributions in binary form must reproduce the above copyright 
-      notice, this list of conditions and the following disclaimer in the
-      documentation and/or other materials provided with the distribution.
-
-THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, 
-INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
-FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
-COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
-OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
-LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
-EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
diff --git a/libraries/eet/ChangeLog b/libraries/eet/ChangeLog
deleted file mode 100644
index 4de0f82..0000000
--- a/libraries/eet/ChangeLog
+++ /dev/null
@@ -1,575 +0,0 @@
-2008-04-20  Carsten Haitzler (The Rasterman)
-
-        1.0.0 release
-
-2008-04-28  Carsten Haitzler (The Rasterman)
-
-        * Fixed allocation of a list (EET_G_LIST) of simple types
-        (IS_SIMPLE_TYPE) to alloc the correct amount (using the correct type 
-        offset). Also fixed a hash (EET_G_HASH) of simple types too.
-
-2008-05-14  Cedric BAIL
-
-        * Fix conversion from a text to a hash (EET_G_HASH).
-
-        * Fix inlined string (EET_T_INLINED_STRING) dump/undump by introducing
-        the new word for the parser 'inlined'.
-
-2008-05-15  Cedric BAIL
-
-        * Fix a typo preventing the parsing of unsigned int (EET_T_UINT).
-
-        * Fix group of simple type by implicitly creating a structure with
-        the simple type in it.
-
-        * Remove dead code handling group of simple type and put assert
-        instead.
-
-2008-05-16  Cedric BAIL
-
-        * Fix eet_data_descriptor3_new as it purpose was to introduce
-        str_direct_alloc/str_direct_free usage. Application should now receive
-        direct pointer to read only (mmaped) string.
-
-        * Fix EET_FILE_MODE_READ_WRITE when file doesn't exist.
-
-        * Fix some miss use of efn->offset.
-
-        * Introduce unit test in EFL. The current set provide an overall
-        coverage rate of 2111 of 2607 lines (81.0%) for eet. It helped
-        finding and fixing the bugs of the last three days.
-          The test suite is based on library check. At this time we need
-        cvs version, look at http://check.sourceforge.net/ to find it.
-          The covering is done by gcov
-          The html report is done by lcov version 1.6 or above.
-        You can found it at http://ltp.sourceforge.net/coverage/lcov.php.
-
-2008-05-19  Cedric BAIL
-
-        * Old Eet file format is now marked as deprecated and accessing old
-        file will display a warning. You can already remove completely all
-        code related to it, but it's still enabled by default. We will later
-        disable it by default and at some point drop the support completely.
-
-        * Remove use of strcpy and sprintf definitively.
-
-2008-06-02  Cedric BAIL
-
-        * Introduce tile support and the possibility to decompress eet
-        image inside an existing surface.
-
-2008-06-26  Cedric BAIL
-
-        * Massiv code cleanup.
-        * Add EET_G_ARRAY and EET_G_VAR_ARRAY support.
-        * Plan for version 2.0 API break of eet_data_descriptor_element_add.
-
-2008-07-17  Cedric BAIL
-
-        Implement various speed improvement :
-
-        * Use the precomputed hash value for Eet_Data_Chunk.
-        * Use a hash table instead of a list for pointer that need to be freed.
-        * Use directly the pointer from the dictionary to do a pointer
-        comparison instead of a strcmp.
-
-2008-07-24  Cedric BAIL
-
-        * Fix wrongly stored image when compressed size is bigger than
-        uncompressed. Fix bug #523.
-
-2008-07-24  Vincent Torri
-
-        * Add Visual Studio solution and vc projects to compile Eet
-        with Microsoft tools.
-
-        Written by Dmitriy Mazovka.
-
-2008-08-20  Cedric BAIL
-
-        * Fix the dictionnary check during eet_open.
-
-2008-08-22  Cedric BAIL
-
-        * Fix memory leaks in eet_data strings
-
-2008-09-03  Cedric BAIL
-
-        * Fix inline-jpeg decode to use mem buf, not tmp-file on platforms that
-        don't support mem_open() etc.
-        * Add eet_memopen_read() to be able to open an eet file already
-        mapped in memory (eg compiled-in or mmaped some other way).
-
-2008-09-11  Cedric BAIL
-
-        * Improve hash generation speed for big files.
-        * Inline more functions explicitly for speed.
-
-2008-09-25  Carsten Haitzler (The Rasterman)
-
-        1.5.0 release
-
-2008-10-20  Cedric BAIL
-
-        * Make use of eina.
-
-2008-10-23  Cedric BAIL
-
-        * Fix string in list and hash.
-
-2008-10-24  Cedric BAIL
-
-        * Fix array in eet_data.
-
-2008-11-13  Cedric BAIL
-
-        * Add crypto support to eet with OpenSSL.
-
-2008-11-13  Arnaud de Turckheim
-
-        * Add GNUtls support to eet.
-
-2008-11-14  Cedric BAIL
-
-        * Make password callback work with GNUtls.
-
-2008-11-26  Cedric BAIL
-
-        * Add a function to retrieve raw signature.
-
-2009-01-30  Cedric BAIL
-
-        * Fix a corrupted pointer use in eet_cipher.c
-
-2009-02-09  Chidambar Zinnoury
-
-        * Add some missing __UNUSED__ flags.
-
-2009-02-26  Luis Felipe Strano Moraes
-
-        * Fix problem reported by llvm
-
-2009-03-09  Cedric BAIL
-
-        * Add sha1 retrieval for an Eet_File.
-
-2009-03-17  Gustavo Sverzut Barbieri
-
-        * Force fsync() after data is written to file, solve ext4 issues.
-
-2009-03-18  Carsten Haitzler (The Rasterman)
-
-        * Disable fsync. Edit the code if you need it.
-
-2009-03-19  Cedric BAIL
-
-        * Make eet_data thread safe.
-
-2009-03-25  Cedric BAIL
-
-        * Fix eet pkg-config dependencies.
-        * Fix double init of gcry.
-
-2009-04-22  Carsten Haitzler (The Rasterman)
-
-        * Release eet 1.2.0
-
-2009-05-18  Cedric BAIL
-
-        * Cleanup Eet_Data code.
-
-2009-06-02  Cedric BAIL
-
-        * Make eet_node API usable.
-
-2009-06-14  Carsten Haitzler (The Rasterman)
-
-        * Release eet 1.2.1
-
-2009-07-08  Cedric BAIL
-
-        * Reorder gcry init to be used during gnutls init.
-
-2009-07-11  Hanspeter Portner
-
-        * Improve docs/examples in Eet.h
-
-2009-07-23  Cedric BAIL
-
-        * Fix init on system without SECMEM.
-
-2009-07-29  Carsten Haitzler (The Rasterman)
-
-        * Release eet 1.2.2
-
-2009-08-13  Cedric BAIL
-
-        * Deprecating eet_data_descriptor*_new.
-        * Add eet_data_descriptor_stream_new and eet_data_descriptor_file_new.
-        * Add eina helper.
-        * Cleanup Eet_Data_Descriptor code.
-
-2009-08-16  Carsten Haitzler (The Rasterman)
-
-        * Fix eet data encode to encode empty structs etc. so save saves
-          something as opposed to nothing
-
-2009-08-16  Carsten Haitzler (The Rasterman)
-
-        * Fix documentation of eet_data_write() and eet_write() for return
-          value to return # of bytes written, not 1 or 0
-
-2009-08-16  Vincent Torri
-
-        * Fix build with suncc (missing alloca() declaration in eet_cipher.c)
-
-2009-09-15  Mathieu Taillefumier
-
-        * Use new Eina_Log infrastructure to report error.
-
-2009-09-15  Cedric BAIL
-
-        * Remove apparently useless eet_freeleak_* from eet_data.
-
-2009-09-29  Cedric BAIL
-
-        * Add Fixed Point support and make it possible to switch from float
-        and double to any fixed point variant supported by eina.
-
-        Note: File saved with fixed point could be read by older version of
-        eet library with EET_T_DOUBLE type.
-
-2009-10-01  Mathieu Taillefumier
-
-        * remove useless Eina_Log macros.
-
-2009-10-01  Vincent Torri
-
-        * Check the returned value of eet_init() in the binary.
-        * Use binary mode of fopen() in eet_main() for Windows compatibility.
-
-2009-10-09  Vincent Torri
-
-        * initialize eina first in eet_init().
-
-2009-11-02  Vincent Torri
-
-        * allow generation of one single file with all source code in it.
-        See configure help to enable it (--enable-amalgamation).
-
-2009-11-11  Vincent Torri
-
-        * Add check on libgcrypt library in configure. Needed when GNUtls
-        support is enabled.
-
-2009-12-02  Carsten Haitzler (The Rasterman)
-
-        * Release eet 1.2.3
-
-2009-12-03  Cedric BAIL
-
-        * Make all operation on Eet_File thread safe.
-
-2009-12-07  Cedric BAIL
-
-        * Fix error when retrieving a different float type than the stored one.
-        * Reduce conversion with a little memory overhead.
-
-2009-12-07  Vincent Torri
-
-        * Include winsock2.h in eet_image.c for htonl definition on Windows.
-        * Fix Visual Studio project files
-
-2009-12-11  Cedric BAIL
-
-        * Make eet_data_descriptor_free safe to call on NULL pointer.
-
-2009-12-21  Cedric BAIL
-
-        * More work on eet_node dump code.
-
-2009-12-28  Cedric BAIL
-
-        * Add fully functionnal eet_node dump code.
-
-2009-12-29  Cedric BAIL
-
-        * Don't mess up when memory realloc failed during data descriptor creation.
-
-2010-01-04  Carsten Haitzler (The Rasterman)
-
-        * Fix another thread deadlock in mutex handling even in a single-threaded app.
-
-2010-01-12  Cedric BAIL
-
-        * Rewrite Eet_Data. Now you can do list/hash/array of strings and all
-        the test suite is passing.
-        * Add eet_data_node_decode_cipher and eet_data_node_read_cipher.
-
-2010-01-15  Cedric BAIL
-
-        * Fix amalgamation.
-
-2010-01-16  Vincent Torri
-
-        * eet_cipher.c: Fix arithmetic pointer on void *
-
-2010-01-17  Cedric BAIL
-
-        * Add a mempool for Eet_Node.
-
-2010-01-21  Cedric BAIL
-
-        * Add experimental API to walk Eet_Node tree.
-
-2010-01-22  Cedric BAIL
-
-        * Add VAR_ARRAY tests.
-
-2010-01-27  Cedric BAIL
-
-        * Improve security by zeroying cipher material as soon as possible.
-
-2010-01-27  Cedric BAIL
-
-        * Improve security by zeroying cipher material as soon as possible.
-
-2010-03-01  Albin Tonnerre
-
-        * Fix override of global symbols.
-
-2010-03-15  Adam Simpkins / Cedric BAIL
-
-        * Fix clearcache race condition.
-
-2010-04-02  Cedric BAIL
-
-        * Fix eet_data_node_read_cipher return type.
-        * Add Eet_Connection.
-
-2010-04-07  Cedric BAIL
-
-        * Improve eet_eina_file_data_descriptor_class_set by using
-        eina_hash_direct_add to avoid duplication hash key string.
-
-2010-04-08  Cedric BAIL
-
-        * Fix file corruption reported by Tiago Falcao <tiago@profusion.mobi>
-
-2010-04-09  Cedric BAIL
-
-        * Add eet_sync.
-        * Only delete the file at the last possible time.
-        * Reduce open file descriptor.
-
-2010-04-16  Cedric BAIL
-
-        * Handle fixed point in data stream.
-
-2010-04-21  Cedric BAIL
-
-        * Add EET_G_UNION and EET_G_VARIANT.
-
-2010-05-29  Carsten Haitzler (The Rasterman)
-
-        * Add EET_VERSION_MAJOR, EET_VERSION_MINOR.
-        * Add Eet_Version, eet_version.
-        * Make configure.ac use m4 defines for version
-        * Support SVN revision in version check
-
-2010-06-07  Carsten Haitzler (The Rasterman)
-
-        * Release eet 1.3.0
-
-2010-06-27  Carsten Haitzler (The Rasterman)
-
-        * Release eet 1.3.2
-
-2010-06-29  Vincent Torri
-
-        * On Windows 64, long is of size 32 bits and not 64 bits. Also
-        LONG_BIT is not defined on Windows.
-
-2010-06-29  Cedric BAIL
-
-        * Add eet_alias support.
-        * Fix possible dead lock in eet_write_cipher.
-
-2010-07-08  Carsten Haitzler (The Rasterman)
-
-        * Moved Eet.h into $includedir/eet-MAJOR_VERSION/
-
-2010-07-15  Vincent Torri
-
-        * Add native Windows thread support instead of using pthread
-        (less overhead). On other OS, pthread is still used by default.
-        Pass --enable-win32-threads to activate thread support on
-        Windows.
-
-2010-07-20  Cedric BAIL
-
-        * Improve file change detection in eet_open by checking size also.
-
-2010-08-02  Cedric BAIL
-
-        * Fix bug in eet_connection code when running on 32bits machine.
-
-2010-08-06  Cedric BAIL
-
-        * Add EET_DATA_DESCRIPTOR_ADD_HASH_STRING.
-
-2010-08-06  Cedric BAIL
-
-        * Break eet_eina_* function helper to provide a clean API/ABI to
-        prevent futur break. This should prevent the ABI break that was
-        introduced with release 1.3.0.
-
-        * Add a specific allocator for array. This should fix wrong allocation
-        case discovered with recent edje file format change.
-
-2010-08-23  Carsten Haitzler (The Rasterman)
-
-        * Fix some cppcheck complaints - all of them bogus though.
-        Nothing actually fixed.
-
-2010-08-27  Cedric BAIL
-
-        * Prevent the build of eet data structure that doesn't match what
-        the application is expecting.
-
-2010-09-02  Cedric BAIL
-
-        * Fix bug of ever growing dictionnary and improve strcmp comparison.
-
-2010-11-12  Cedric BAIL
-
-        * Don't try to read broken file when open in READ_WRITE mode.
-
-2010-11-14  Cedric BAIL
-
-        * Fix bug with cypher and compression used together.
-
-2010-11-21  Carsten Haitzler (The Rasterman)
-
-        * Fix another bug related to cipher and compression (leak and
-        bad free)
-
-2010-11-25  Cedric BAIL
-
-        * Add EET_DATA_DESCRIPTOR_ADD_VAR_ARRAY_STRING.
-
-2010-11-26  Cedric BAIL
-
-        * Reduce memory used by Eet dictionary.
-
-2010-11-29  Cedric BAIL
-
-        * Improve speed of Eet_String users. It does impact all string
-        encoding/decoding, but even faster for stringshare encoding.
-
-        * Improve speed when decoding mostly array with eet_data_read.
-
-2010-12-03  Cedric BAIL
-
-        * Improve portability.
-
-2010-12-07  Carsten Haitzler (The Rasterman)
-
-        * Move raw function pointer defs to typedefs in public API for
-        readability improvements.
-
-2011-01-29  Carsten Haitzler (The Rasterman)
-
-         * 1.4.0 release
-
-2011-01-29  Vincent Torri
-
-        * Use eina_stringshare_add() instead of strdup() on mmaped file names
-        on Windows. This fix eet shut down on Windows.
-
-2011-02-14  Cedric BAIL
-
-        * Improve Eet_Data to make decoding of EET_G_UNION and EET_G_*ARRAY
-        faster and less memory heavy.
-
-2011-05-14  Cedric BAIL
-
-        * Use Eina_Lock.
-        * Sync GNUTLS initialisation with Eina.
-
-2011-05-17  Cedric BAIL
-
-        * Use Eina_File.
-        * Fix test forgetting to initialize eet.
-
-2011-05-23  Vincent Torri
-
-        * Fix compilation with libjpeg 8 on Windows.
-
-2011-06-10  Cedric BAIL
-
-        * Add EET_DATA_DESCRIPTOR_ADD_LIST_STRING helper to define List of char *.
-
-2011-07-04  Mike Blumenkrantz
-
-        * Add functions to manipulate nodes:
-            eet_node_children_get, eet_node_next_get, eet_node_parent_get,
-            eet_node_type_get, eet_node_value_get, eet_node_name_get
-        * Fix segmentation faults in several eet_node functions
-
-2011-07-16  Vincent Torri
-
-        * On Windows, open() in text mode followed by fdopen() in
-        binary mode does not create a stream in binary mode.
-        So add O_BINARY to open().
-
-2011-07-29  Mike Blumenkrantz
-
-        * Add eet_alias_get to return the destination name of an alias
-
-2011-09-15  Cedric Bail
-
-        * Add eet_data_xattr_cipher_get and eet_data_xattr_cipher_set.
-
-2011-10-04  Carsten Haitzler (The Rasterman)
-
-        * Fix issue where an empty eet file (no keys) is not openable
-        for read/write anymore. Allow it.
-
-2011-10-28  David Seikel (onefang)
-
-        * Added a new macro for adding arrays of basic types.
-           EET_DATA_DESCRIPTOR_ADD_BASIC_ARRAY
-
-2011-11-16  Carsten Haitzler (The Rasterman)
-
-        * JPEG encode and decode in eet now uses ISLOW (not IFAST) due to
-        noticable quality losses in the chase for speed. It will use
-        IFAST for quality less than 60 when encoding
-
-2011-12-02  Carsten Haitzler (The Rasterman)
-
-        1.1.0 release
-
-2011-12-02  Mike Blumenkrantz
-
-        * added eet_file_get to return the filename of an Eet_File
-        * Eet_File filenames are now stringshared
-        * added mempool allocators
-
-2011-12-29  Carsten Haitzler (The Rasterman)
-
-        * increase eet_connection packet size to 1Mb - more reasonable.
-
-2012-01-07  Boris Faure (billiob)
-
-        * make eet tool write to standard output if no output file given.
-
-2012-02-09  Cedric Bail
-
-        * add support for GNUTLS 3.x.
-
-2012-02-10  Cedric Bail
-
-        * add eet_dictionary_count.
-        * add "eet -t FILE.EET".
diff --git a/libraries/eet/INSTALL b/libraries/eet/INSTALL
deleted file mode 100644
index 23e5f25..0000000
--- a/libraries/eet/INSTALL
+++ /dev/null
@@ -1,236 +0,0 @@
-Installation Instructions
-*************************
-
-Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005 Free
-Software Foundation, Inc.
-
-This file is free documentation; the Free Software Foundation gives
-unlimited permission to copy, distribute and modify it.
-
-Basic Installation
-==================
-
-These are generic installation instructions.
-
-   The `configure' shell script attempts to guess correct values for
-various system-dependent variables used during compilation.  It uses
-those values to create a `Makefile' in each directory of the package.
-It may also create one or more `.h' files containing system-dependent
-definitions.  Finally, it creates a shell script `config.status' that
-you can run in the future to recreate the current configuration, and a
-file `config.log' containing compiler output (useful mainly for
-debugging `configure').
-
-   It can also use an optional file (typically called `config.cache'
-and enabled with `--cache-file=config.cache' or simply `-C') that saves
-the results of its tests to speed up reconfiguring.  (Caching is
-disabled by default to prevent problems with accidental use of stale
-cache files.)
-
-   If you need to do unusual things to compile the package, please try
-to figure out how `configure' could check whether to do them, and mail
-diffs or instructions to the address given in the `README' so they can
-be considered for the next release.  If you are using the cache, and at
-some point `config.cache' contains results you don't want to keep, you
-may remove or edit it.
-
-   The file `configure.ac' (or `configure.in') is used to create
-`configure' by a program called `autoconf'.  You only need
-`configure.ac' if you want to change it or regenerate `configure' using
-a newer version of `autoconf'.
-
-The simplest way to compile this package is:
-
-  1. `cd' to the directory containing the package's source code and type
-     `./configure' to configure the package for your system.  If you're
-     using `csh' on an old version of System V, you might need to type
-     `sh ./configure' instead to prevent `csh' from trying to execute
-     `configure' itself.
-
-     Running `configure' takes awhile.  While running, it prints some
-     messages telling which features it is checking for.
-
-  2. Type `make' to compile the package.
-
-  3. Optionally, type `make check' to run any self-tests that come with
-     the package.
-
-  4. Type `make install' to install the programs and any data files and
-     documentation.
-
-  5. You can remove the program binaries and object files from the
-     source code directory by typing `make clean'.  To also remove the
-     files that `configure' created (so you can compile the package for
-     a different kind of computer), type `make distclean'.  There is
-     also a `make maintainer-clean' target, but that is intended mainly
-     for the package's developers.  If you use it, you may have to get
-     all sorts of other programs in order to regenerate files that came
-     with the distribution.
-
-Compilers and Options
-=====================
-
-Some systems require unusual options for compilation or linking that the
-`configure' script does not know about.  Run `./configure --help' for
-details on some of the pertinent environment variables.
-
-   You can give `configure' initial values for configuration parameters
-by setting variables in the command line or in the environment.  Here
-is an example:
-
-     ./configure CC=c89 CFLAGS=-O2 LIBS=-lposix
-
-   *Note Defining Variables::, for more details.
-
-Compiling For Multiple Architectures
-====================================
-
-You can compile the package for more than one kind of computer at the
-same time, by placing the object files for each architecture in their
-own directory.  To do this, you must use a version of `make' that
-supports the `VPATH' variable, such as GNU `make'.  `cd' to the
-directory where you want the object files and executables to go and run
-the `configure' script.  `configure' automatically checks for the
-source code in the directory that `configure' is in and in `..'.
-
-   If you have to use a `make' that does not support the `VPATH'
-variable, you have to compile the package for one architecture at a
-time in the source code directory.  After you have installed the
-package for one architecture, use `make distclean' before reconfiguring
-for another architecture.
-
-Installation Names
-==================
-
-By default, `make install' installs the package's commands under
-`/usr/local/bin', include files under `/usr/local/include', etc.  You
-can specify an installation prefix other than `/usr/local' by giving
-`configure' the option `--prefix=PREFIX'.
-
-   You can specify separate installation prefixes for
-architecture-specific files and architecture-independent files.  If you
-pass the option `--exec-prefix=PREFIX' to `configure', the package uses
-PREFIX as the prefix for installing programs and libraries.
-Documentation and other data files still use the regular prefix.
-
-   In addition, if you use an unusual directory layout you can give
-options like `--bindir=DIR' to specify different values for particular
-kinds of files.  Run `configure --help' for a list of the directories
-you can set and what kinds of files go in them.
-
-   If the package supports it, you can cause programs to be installed
-with an extra prefix or suffix on their names by giving `configure' the
-option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
-
-Optional Features
-=================
-
-Some packages pay attention to `--enable-FEATURE' options to
-`configure', where FEATURE indicates an optional part of the package.
-They may also pay attention to `--with-PACKAGE' options, where PACKAGE
-is something like `gnu-as' or `x' (for the X Window System).  The
-`README' should mention any `--enable-' and `--with-' options that the
-package recognizes.
-
-   For packages that use the X Window System, `configure' can usually
-find the X include and library files automatically, but if it doesn't,
-you can use the `configure' options `--x-includes=DIR' and
-`--x-libraries=DIR' to specify their locations.
-
-Specifying the System Type
-==========================
-
-There may be some features `configure' cannot figure out automatically,
-but needs to determine by the type of machine the package will run on.
-Usually, assuming the package is built to be run on the _same_
-architectures, `configure' can figure that out, but if it prints a
-message saying it cannot guess the machine type, give it the
-`--build=TYPE' option.  TYPE can either be a short name for the system
-type, such as `sun4', or a canonical name which has the form:
-
-     CPU-COMPANY-SYSTEM
-
-where SYSTEM can have one of these forms:
-
-     OS KERNEL-OS
-
-   See the file `config.sub' for the possible values of each field.  If
-`config.sub' isn't included in this package, then this package doesn't
-need to know the machine type.
-
-   If you are _building_ compiler tools for cross-compiling, you should
-use the option `--target=TYPE' to select the type of system they will
-produce code for.
-
-   If you want to _use_ a cross compiler, that generates code for a
-platform different from the build platform, you should specify the
-"host" platform (i.e., that on which the generated programs will
-eventually be run) with `--host=TYPE'.
-
-Sharing Defaults
-================
-
-If you want to set default values for `configure' scripts to share, you
-can create a site shell script called `config.site' that gives default
-values for variables like `CC', `cache_file', and `prefix'.
-`configure' looks for `PREFIX/share/config.site' if it exists, then
-`PREFIX/etc/config.site' if it exists.  Or, you can set the
-`CONFIG_SITE' environment variable to the location of the site script.
-A warning: not all `configure' scripts look for a site script.
-
-Defining Variables
-==================
-
-Variables not defined in a site shell script can be set in the
-environment passed to `configure'.  However, some packages may run
-configure again during the build, and the customized values of these
-variables may be lost.  In order to avoid this problem, you should set
-them in the `configure' command line, using `VAR=value'.  For example:
-
-     ./configure CC=/usr/local2/bin/gcc
-
-causes the specified `gcc' to be used as the C compiler (unless it is
-overridden in the site shell script).  Here is a another example:
-
-     /bin/bash ./configure CONFIG_SHELL=/bin/bash
-
-Here the `CONFIG_SHELL=/bin/bash' operand causes subsequent
-configuration-related scripts to be executed by `/bin/bash'.
-
-`configure' Invocation
-======================
-
-`configure' recognizes the following options to control how it operates.
-
-`--help'
-`-h'
-     Print a summary of the options to `configure', and exit.
-
-`--version'
-`-V'
-     Print the version of Autoconf used to generate the `configure'
-     script, and exit.
-
-`--cache-file=FILE'
-     Enable the cache: use and save the results of the tests in FILE,
-     traditionally `config.cache'.  FILE defaults to `/dev/null' to
-     disable caching.
-
-`--config-cache'
-`-C'
-     Alias for `--cache-file=config.cache'.
-
-`--quiet'
-`--silent'
-`-q'
-     Do not print messages saying which checks are being made.  To
-     suppress all normal output, redirect it to `/dev/null' (any error
-     messages will still be shown).
-
-`--srcdir=DIR'
-     Look for the package's source code in directory DIR.  Usually
-     `configure' can determine that directory automatically.
-
-`configure' also accepts some other, not widely useful, options.  Run
-`configure --help' for more details.
-
diff --git a/libraries/eet/Makefile.am b/libraries/eet/Makefile.am
deleted file mode 100644
index d3622dc..0000000
--- a/libraries/eet/Makefile.am
+++ /dev/null
@@ -1,99 +0,0 @@
-ACLOCAL_AMFLAGS = -I m4
-
-SUBDIRS = src doc
-
-MAINTAINERCLEANFILES = \
-Makefile.in \
-aclocal.m4 \
-compile \
-config.guess \
-config.h.in \
-config.h.in~ \
-config.sub \
-configure \
-depcomp \
-install-sh \
-ltmain.sh \
-missing \
-$(PACKAGE_TARNAME)-$(PACKAGE_VERSION).tar.gz \
-$(PACKAGE_TARNAME)-$(PACKAGE_VERSION).tar.bz2 \
-$(PACKAGE_TARNAME)-$(PACKAGE_VERSION)-doc.tar.bz2 \
-m4/libtool.m4 \
-m4/lt~obsolete.m4 \
-m4/ltoptions.m4 \
-m4/ltsugar.m4 \
-m4/ltversion.m4
-
-EXTRA_DIST = \
-AUTHORS \
-COPYING \
-autogen.sh \
-eet.pc.in \
-eet.spec.in \
-eet.spec \
-m4/ac_attribute.m4 \
-m4/ac_path_generic.m4 \
-m4/efl_binary.m4 \
-m4/efl_coverage.m4 \
-m4/efl_doxygen.m4 \
-m4/efl_fnmatch.m4 \
-m4/efl_tests.m4 \
-m4/efl_path_max.m4
-
-pkgconfigdir = $(libdir)/pkgconfig
-pkgconfig_DATA = eet.pc
-
-.PHONY: doc coverage
-
-# Documentation
-
-doc:
-        @echo "entering doc/"
-        $(MAKE) -C doc doc
-
-# Unit tests
-
-if EFL_ENABLE_TESTS
-
-check-local:
-        @./src/tests/eet_suite
-
-else
-
-check-local:
-        @echo "reconfigure with --enable-tests"
-
-endif
-
-# Coverage report
-
-if EFL_ENABLE_COVERAGE
-lcov-reset:
-        @rm -rf $(top_builddir)/coverage
-        @find $(top_builddir) -name "*.gcda" -delete
-        @lcov --zerocounters --directory $(top_builddir)
-
-lcov-report:
-        @mkdir $(top_builddir)/coverage
-        lcov --capture --compat-libtool --output-file $(top_builddir)/coverage/coverage.info --directory $(top_builddir)
-        lcov --remove $(top_builddir)/coverage/coverage.info '*.h' --output-file $(top_builddir)/coverage/coverage.cleaned.info
-        genhtml -t "$(PACKAGE_STRING)" -o $(top_builddir)/coverage/html $(top_builddir)/coverage/coverage.cleaned.info
-        @echo "Coverage Report at $(top_builddir)/coverage/html"
-
-coverage:
-        @$(MAKE) lcov-reset
-        @$(MAKE) check
-        @$(MAKE) lcov-report
-
-clean-local:
-        @rm -rf coverage
-else
-lcov-reset:
-        @echo "reconfigure with --enable-coverage"
-
-lcov-report:
-        @echo "reconfigure with --enable-coverage"
-
-coverage:
-        @echo "reconfigure with --enable-tests --enable-coverage"
-endif
diff --git a/libraries/eet/Makefile.in b/libraries/eet/Makefile.in
deleted file mode 100644
index fb2955c..0000000
--- a/libraries/eet/Makefile.in
+++ /dev/null
@@ -1,914 +0,0 @@
-# Makefile.in generated by automake 1.11.1 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
-# Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-VPATH = @srcdir@
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-subdir = .
-DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \
-        $(srcdir)/Makefile.in $(srcdir)/config.h.in \
-        $(srcdir)/eet.pc.in $(srcdir)/eet.spec.in \
-        $(top_srcdir)/configure ABOUT-NLS AUTHORS COPYING ChangeLog \
-        INSTALL NEWS compile config.guess config.sub depcomp \
-        install-sh ltmain.sh missing
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/ac_attribute.m4 \
-        $(top_srcdir)/m4/ac_path_generic.m4 \
-        $(top_srcdir)/m4/efl_binary.m4 \
-        $(top_srcdir)/m4/efl_compiler_flag.m4 \
-        $(top_srcdir)/m4/efl_coverage.m4 \
-        $(top_srcdir)/m4/efl_doxygen.m4 \
-        $(top_srcdir)/m4/efl_fnmatch.m4 \
-        $(top_srcdir)/m4/efl_path_max.m4 $(top_srcdir)/m4/efl_tests.m4 \
-        $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
-        $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
-        $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-        $(ACLOCAL_M4)
-am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
- configure.lineno config.status.lineno
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = config.h
-CONFIG_CLEAN_FILES = eet.pc eet.spec
-CONFIG_CLEAN_VPATH_FILES =
-AM_V_GEN = $(am__v_GEN_$(V))
-am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
-am__v_GEN_0 = @echo "  GEN   " $@;
-AM_V_at = $(am__v_at_$(V))
-am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
-am__v_at_0 = @
-SOURCES =
-DIST_SOURCES =
-RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
-        html-recursive info-recursive install-data-recursive \
-        install-dvi-recursive install-exec-recursive \
-        install-html-recursive install-info-recursive \
-        install-pdf-recursive install-ps-recursive install-recursive \
-        installcheck-recursive installdirs-recursive pdf-recursive \
-        ps-recursive uninstall-recursive
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
-    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
-    *) f=$$p;; \
-  esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
-  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
-  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
-  for p in $$list; do echo "$$p $$p"; done | \
-  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
-  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
-    if (++n[$$2] == $(am__install_max)) \
-      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
-    END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
-  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
-  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__installdirs = "$(DESTDIR)$(pkgconfigdir)"
-DATA = $(pkgconfig_DATA)
-RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
-  distclean-recursive maintainer-clean-recursive
-AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
-        $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
-        distdir dist dist-all distcheck
-ETAGS = etags
-CTAGS = ctags
-DIST_SUBDIRS = $(SUBDIRS)
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
-am__remove_distdir = \
-  { test ! -d "$(distdir)" \
-    || { find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
-         && rm -fr "$(distdir)"; }; }
-am__relativize = \
-  dir0=`pwd`; \
-  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
-  sed_rest='s,^[^/]*/*,,'; \
-  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
-  sed_butlast='s,/*[^/]*$$,,'; \
-  while test -n "$$dir1"; do \
-    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
-    if test "$$first" != "."; then \
-      if test "$$first" = ".."; then \
-        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
-        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
-      else \
-        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
-        if test "$$first2" = "$$first"; then \
-          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
-        else \
-          dir2="../$$dir2"; \
-        fi; \
-        dir0="$$dir0"/"$$first"; \
-      fi; \
-    fi; \
-    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
-  done; \
-  reldir="$$dir2"
-DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2
-GZIP_ENV = --best
-distuninstallcheck_listfiles = find . -type f -print
-distcleancheck_listfiles = find . -type f -print
-ACLOCAL = @ACLOCAL@
-ALLOCA = @ALLOCA@
-AMTAR = @AMTAR@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AR = @AR@
-AS = @AS@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CHECK_CFLAGS = @CHECK_CFLAGS@
-CHECK_LIBS = @CHECK_LIBS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEBUG_CFLAGS = @DEBUG_CFLAGS@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DLLTOOL = @DLLTOOL@
-DSYMUTIL = @DSYMUTIL@
-DUMPBIN = @DUMPBIN@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EET_CFLAGS = @EET_CFLAGS@
-EET_CPPFLAGS = @EET_CPPFLAGS@
-EET_LIBS = @EET_LIBS@
-EET_PRG = @EET_PRG@
-EFL_COVERAGE_CFLAGS = @EFL_COVERAGE_CFLAGS@
-EFL_COVERAGE_LIBS = @EFL_COVERAGE_LIBS@
-EFL_EET_BUILD = @EFL_EET_BUILD@
-EFL_FNMATCH_LIBS = @EFL_FNMATCH_LIBS@
-EGREP = @EGREP@
-EINA_CFLAGS = @EINA_CFLAGS@
-EINA_LIBS = @EINA_LIBS@
-EVIL_CFLAGS = @EVIL_CFLAGS@
-EVIL_LIBS = @EVIL_LIBS@
-EXEEXT = @EXEEXT@
-EXOTIC_CFLAGS = @EXOTIC_CFLAGS@
-EXOTIC_LIBS = @EXOTIC_LIBS@
-FGREP = @FGREP@
-GNUTLS_CFLAGS = @GNUTLS_CFLAGS@
-GNUTLS_LIBS = @GNUTLS_LIBS@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-LD = @LD@
-LDFLAGS = @LDFLAGS@
-LIBGCRYPT_CFLAGS = @LIBGCRYPT_CFLAGS@
-LIBGCRYPT_CONFIG = @LIBGCRYPT_CONFIG@
-LIBGCRYPT_LIBS = @LIBGCRYPT_LIBS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LIPO = @LIPO@
-LN_S = @LN_S@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-MKDIR_P = @MKDIR_P@
-NM = @NM@
-NMEDIT = @NMEDIT@
-OBJDUMP = @OBJDUMP@
-OBJEXT = @OBJEXT@
-OPENSSL_CFLAGS = @OPENSSL_CFLAGS@
-OPENSSL_LIBS = @OPENSSL_LIBS@
-OTOOL = @OTOOL@
-OTOOL64 = @OTOOL64@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-PKG_CONFIG = @PKG_CONFIG@
-PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
-PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
-RANLIB = @RANLIB@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-STRIP = @STRIP@
-VERSION = @VERSION@
-VMAJ = @VMAJ@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-efl_doxygen = @efl_doxygen@
-efl_have_doxygen = @efl_have_doxygen@
-exec_prefix = @exec_prefix@
-have_lcov = @have_lcov@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-lt_ECHO = @lt_ECHO@
-lt_enable_auto_import = @lt_enable_auto_import@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-pkgconfig_requires_private = @pkgconfig_requires_private@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-release_info = @release_info@
-requirement_eet = @requirement_eet@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-version_info = @version_info@
-ACLOCAL_AMFLAGS = -I m4
-SUBDIRS = src doc
-MAINTAINERCLEANFILES = \
-Makefile.in \
-aclocal.m4 \
-compile \
-config.guess \
-config.h.in \
-config.h.in~ \
-config.sub \
-configure \
-depcomp \
-install-sh \
-ltmain.sh \
-missing \
-$(PACKAGE_TARNAME)-$(PACKAGE_VERSION).tar.gz \
-$(PACKAGE_TARNAME)-$(PACKAGE_VERSION).tar.bz2 \
-$(PACKAGE_TARNAME)-$(PACKAGE_VERSION)-doc.tar.bz2 \
-m4/libtool.m4 \
-m4/lt~obsolete.m4 \
-m4/ltoptions.m4 \
-m4/ltsugar.m4 \
-m4/ltversion.m4
-
-EXTRA_DIST = \
-AUTHORS \
-COPYING \
-autogen.sh \
-eet.pc.in \
-eet.spec.in \
-eet.spec \
-m4/ac_attribute.m4 \
-m4/ac_path_generic.m4 \
-m4/efl_binary.m4 \
-m4/efl_coverage.m4 \
-m4/efl_doxygen.m4 \
-m4/efl_fnmatch.m4 \
-m4/efl_tests.m4 \
-m4/efl_path_max.m4
-
-pkgconfigdir = $(libdir)/pkgconfig
-pkgconfig_DATA = eet.pc
-all: config.h
-        $(MAKE) $(AM_MAKEFLAGS) all-recursive
-
-.SUFFIXES:
-am--refresh:
-        @:
-$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
-        @for dep in $?; do \
-          case '$(am__configure_deps)' in \
-            *$$dep*) \
-              echo ' cd $(srcdir) && $(AUTOMAKE) --gnu'; \
-              $(am__cd) $(srcdir) && $(AUTOMAKE) --gnu \
-                && exit 0; \
-              exit 1;; \
-          esac; \
-        done; \
-        echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \
-        $(am__cd) $(top_srcdir) && \
-          $(AUTOMAKE) --gnu Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-        @case '$?' in \
-          *config.status*) \
-            echo ' $(SHELL) ./config.status'; \
-            $(SHELL) ./config.status;; \
-          *) \
-            echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
-            cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
-        esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-        $(SHELL) ./config.status --recheck
-
-$(top_srcdir)/configure:  $(am__configure_deps)
-        $(am__cd) $(srcdir) && $(AUTOCONF)
-$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
-        $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-$(am__aclocal_m4_deps):
-
-config.h: stamp-h1
-        @if test ! -f $@; then \
-          rm -f stamp-h1; \
-          $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \
-        else :; fi
-
-stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
-        @rm -f stamp-h1
-        cd $(top_builddir) && $(SHELL) ./config.status config.h
-$(srcdir)/config.h.in:  $(am__configure_deps) 
-        ($(am__cd) $(top_srcdir) && $(AUTOHEADER))
-        rm -f stamp-h1
-        touch $@
-
-distclean-hdr:
-        -rm -f config.h stamp-h1
-eet.pc: $(top_builddir)/config.status $(srcdir)/eet.pc.in
-        cd $(top_builddir) && $(SHELL) ./config.status $@
-eet.spec: $(top_builddir)/config.status $(srcdir)/eet.spec.in
-        cd $(top_builddir) && $(SHELL) ./config.status $@
-
-mostlyclean-libtool:
-        -rm -f *.lo
-
-clean-libtool:
-        -rm -rf .libs _libs
-
-distclean-libtool:
-        -rm -f libtool config.lt
-install-pkgconfigDATA: $(pkgconfig_DATA)
-        @$(NORMAL_INSTALL)
-        test -z "$(pkgconfigdir)" || $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)"
-        @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
-        for p in $$list; do \
-          if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-          echo "$$d$$p"; \
-        done | $(am__base_list) | \
-        while read files; do \
-          echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgconfigdir)'"; \
-          $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgconfigdir)" || exit $$?; \
-        done
-
-uninstall-pkgconfigDATA:
-        @$(NORMAL_UNINSTALL)
-        @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
-        files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
-        test -n "$$files" || exit 0; \
-        echo " ( cd '$(DESTDIR)$(pkgconfigdir)' && rm -f" $$files ")"; \
-        cd "$(DESTDIR)$(pkgconfigdir)" && rm -f $$files
-
-# This directory's subdirectories are mostly independent; you can cd
-# into them and run `make' without going through this Makefile.
-# To change the values of `make' variables: instead of editing Makefiles,
-# (1) if the variable is set in `config.status', edit `config.status'
-#     (which will cause the Makefiles to be regenerated when you run `make');
-# (2) otherwise, pass the desired values on the `make' command line.
-$(RECURSIVE_TARGETS):
-        @fail= failcom='exit 1'; \
-        for f in x $$MAKEFLAGS; do \
-          case $$f in \
-            *=* | --[!k]*);; \
-            *k*) failcom='fail=yes';; \
-          esac; \
-        done; \
-        dot_seen=no; \
-        target=`echo $@ | sed s/-recursive//`; \
-        list='$(SUBDIRS)'; for subdir in $$list; do \
-          echo "Making $$target in $$subdir"; \
-          if test "$$subdir" = "."; then \
-            dot_seen=yes; \
-            local_target="$$target-am"; \
-          else \
-            local_target="$$target"; \
-          fi; \
-          ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-          || eval $$failcom; \
-        done; \
-        if test "$$dot_seen" = "no"; then \
-          $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
-        fi; test -z "$$fail"
-
-$(RECURSIVE_CLEAN_TARGETS):
-        @fail= failcom='exit 1'; \
-        for f in x $$MAKEFLAGS; do \
-          case $$f in \
-            *=* | --[!k]*);; \
-            *k*) failcom='fail=yes';; \
-          esac; \
-        done; \
-        dot_seen=no; \
-        case "$@" in \
-          distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
-          *) list='$(SUBDIRS)' ;; \
-        esac; \
-        rev=''; for subdir in $$list; do \
-          if test "$$subdir" = "."; then :; else \
-            rev="$$subdir $$rev"; \
-          fi; \
-        done; \
-        rev="$$rev ."; \
-        target=`echo $@ | sed s/-recursive//`; \
-        for subdir in $$rev; do \
-          echo "Making $$target in $$subdir"; \
-          if test "$$subdir" = "."; then \
-            local_target="$$target-am"; \
-          else \
-            local_target="$$target"; \
-          fi; \
-          ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-          || eval $$failcom; \
-        done && test -z "$$fail"
-tags-recursive:
-        list='$(SUBDIRS)'; for subdir in $$list; do \
-          test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
-        done
-ctags-recursive:
-        list='$(SUBDIRS)'; for subdir in $$list; do \
-          test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
-        done
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
-        list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
-        unique=`for i in $$list; do \
-            if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-          done | \
-          $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-              END { if (nonempty) { for (i in files) print i; }; }'`; \
-        mkid -fID $$unique
-tags: TAGS
-
-TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
-                $(TAGS_FILES) $(LISP)
-        set x; \
-        here=`pwd`; \
-        if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
-          include_option=--etags-include; \
-          empty_fix=.; \
-        else \
-          include_option=--include; \
-          empty_fix=; \
-        fi; \
-        list='$(SUBDIRS)'; for subdir in $$list; do \
-          if test "$$subdir" = .; then :; else \
-            test ! -f $$subdir/TAGS || \
-              set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
-          fi; \
-        done; \
-        list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
-        unique=`for i in $$list; do \
-            if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-          done | \
-          $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-              END { if (nonempty) { for (i in files) print i; }; }'`; \
-        shift; \
-        if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
-          test -n "$$unique" || unique=$$empty_fix; \
-          if test $$# -gt 0; then \
-            $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-              "$$@" $$unique; \
-          else \
-            $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-              $$unique; \
-          fi; \
-        fi
-ctags: CTAGS
-CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
-                $(TAGS_FILES) $(LISP)
-        list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
-        unique=`for i in $$list; do \
-            if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-          done | \
-          $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-              END { if (nonempty) { for (i in files) print i; }; }'`; \
-        test -z "$(CTAGS_ARGS)$$unique" \
-          || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-             $$unique
-
-GTAGS:
-        here=`$(am__cd) $(top_builddir) && pwd` \
-          && $(am__cd) $(top_srcdir) \
-          && gtags -i $(GTAGS_ARGS) "$$here"
-
-distclean-tags:
-        -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-distdir: $(DISTFILES)
-        $(am__remove_distdir)
-        test -d "$(distdir)" || mkdir "$(distdir)"
-        @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-        topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-        list='$(DISTFILES)'; \
-          dist_files=`for file in $$list; do echo $$file; done | \
-          sed -e "s|^$$srcdirstrip/||;t" \
-              -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
-        case $$dist_files in \
-          */*) $(MKDIR_P) `echo "$$dist_files" | \
-                           sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
-                           sort -u` ;; \
-        esac; \
-        for file in $$dist_files; do \
-          if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-          if test -d $$d/$$file; then \
-            dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
-            if test -d "$(distdir)/$$file"; then \
-              find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-            fi; \
-            if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-              cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
-              find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-            fi; \
-            cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
-          else \
-            test -f "$(distdir)/$$file" \
-            || cp -p $$d/$$file "$(distdir)/$$file" \
-            || exit 1; \
-          fi; \
-        done
-        @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
-          if test "$$subdir" = .; then :; else \
-            test -d "$(distdir)/$$subdir" \
-            || $(MKDIR_P) "$(distdir)/$$subdir" \
-            || exit 1; \
-          fi; \
-        done
-        @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
-          if test "$$subdir" = .; then :; else \
-            dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
-            $(am__relativize); \
-            new_distdir=$$reldir; \
-            dir1=$$subdir; dir2="$(top_distdir)"; \
-            $(am__relativize); \
-            new_top_distdir=$$reldir; \
-            echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
-            echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
-            ($(am__cd) $$subdir && \
-              $(MAKE) $(AM_MAKEFLAGS) \
-                top_distdir="$$new_top_distdir" \
-                distdir="$$new_distdir" \
-                am__remove_distdir=: \
-                am__skip_length_check=: \
-                am__skip_mode_fix=: \
-                distdir) \
-              || exit 1; \
-          fi; \
-        done
-        -test -n "$(am__skip_mode_fix)" \
-        || find "$(distdir)" -type d ! -perm -755 \
-                -exec chmod u+rwx,go+rx {} \; -o \
-          ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
-          ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
-          ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
-        || chmod -R a+r "$(distdir)"
-dist-gzip: distdir
-        tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
-        $(am__remove_distdir)
-dist-bzip2: distdir
-        tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
-        $(am__remove_distdir)
-
-dist-lzma: distdir
-        tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
-        $(am__remove_distdir)
-
-dist-xz: distdir
-        tardir=$(distdir) && $(am__tar) | xz -c >$(distdir).tar.xz
-        $(am__remove_distdir)
-
-dist-tarZ: distdir
-        tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
-        $(am__remove_distdir)
-
-dist-shar: distdir
-        shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
-        $(am__remove_distdir)
-
-dist-zip: distdir
-        -rm -f $(distdir).zip
-        zip -rq $(distdir).zip $(distdir)
-        $(am__remove_distdir)
-
-dist dist-all: distdir
-        tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
-        tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
-        $(am__remove_distdir)
-
-# This target untars the dist file and tries a VPATH configuration.  Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
-        case '$(DIST_ARCHIVES)' in \
-        *.tar.gz*) \
-          GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
-        *.tar.bz2*) \
-          bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
-        *.tar.lzma*) \
-          lzma -dc $(distdir).tar.lzma | $(am__untar) ;;\
-        *.tar.xz*) \
-          xz -dc $(distdir).tar.xz | $(am__untar) ;;\
-        *.tar.Z*) \
-          uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
-        *.shar.gz*) \
-          GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
-        *.zip*) \
-          unzip $(distdir).zip ;;\
-        esac
-        chmod -R a-w $(distdir); chmod a+w $(distdir)
-        mkdir $(distdir)/_build
-        mkdir $(distdir)/_inst
-        chmod a-w $(distdir)
-        test -d $(distdir)/_build || exit 0; \
-        dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
-          && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
-          && am__cwd=`pwd` \
-          && $(am__cd) $(distdir)/_build \
-          && ../configure --srcdir=.. --prefix="$$dc_install_base" \
-            $(DISTCHECK_CONFIGURE_FLAGS) \
-          && $(MAKE) $(AM_MAKEFLAGS) \
-          && $(MAKE) $(AM_MAKEFLAGS) dvi \
-          && $(MAKE) $(AM_MAKEFLAGS) check \
-          && $(MAKE) $(AM_MAKEFLAGS) install \
-          && $(MAKE) $(AM_MAKEFLAGS) installcheck \
-          && $(MAKE) $(AM_MAKEFLAGS) uninstall \
-          && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
-                distuninstallcheck \
-          && chmod -R a-w "$$dc_install_base" \
-          && ({ \
-               (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
-               && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
-               && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
-               && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
-                    distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
-              } || { rm -rf "$$dc_destdir"; exit 1; }) \
-          && rm -rf "$$dc_destdir" \
-          && $(MAKE) $(AM_MAKEFLAGS) dist \
-          && rm -rf $(DIST_ARCHIVES) \
-          && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
-          && cd "$$am__cwd" \
-          || exit 1
-        $(am__remove_distdir)
-        @(echo "$(distdir) archives ready for distribution: "; \
-          list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
-          sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
-distuninstallcheck:
-        @$(am__cd) '$(distuninstallcheck_dir)' \
-        && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
-           || { echo "ERROR: files left after uninstall:" ; \
-                if test -n "$(DESTDIR)"; then \
-                  echo "  (check DESTDIR support)"; \
-                fi ; \
-                $(distuninstallcheck_listfiles) ; \
-                exit 1; } >&2
-distcleancheck: distclean
-        @if test '$(srcdir)' = . ; then \
-          echo "ERROR: distcleancheck can only run from a VPATH build" ; \
-          exit 1 ; \
-        fi
-        @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
-          || { echo "ERROR: files left in build directory after distclean:" ; \
-               $(distcleancheck_listfiles) ; \
-               exit 1; } >&2
-check-am: all-am
-        $(MAKE) $(AM_MAKEFLAGS) check-local
-check: check-recursive
-all-am: Makefile $(DATA) config.h
-installdirs: installdirs-recursive
-installdirs-am:
-        for dir in "$(DESTDIR)$(pkgconfigdir)"; do \
-          test -z "$$dir" || $(MKDIR_P) "$$dir"; \
-        done
-install: install-recursive
-install-exec: install-exec-recursive
-install-data: install-data-recursive
-uninstall: uninstall-recursive
-
-install-am: all-am
-        @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-recursive
-install-strip:
-        $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-          install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-          `test -z '$(STRIP)' || \
-            echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-        -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-        -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
-        @echo "This command is intended for maintainers to use"
-        @echo "it deletes files that may require special tools to rebuild."
-        -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
-@EFL_ENABLE_COVERAGE_FALSE@clean-local:
-clean: clean-recursive
-
-clean-am: clean-generic clean-libtool clean-local mostlyclean-am
-
-distclean: distclean-recursive
-        -rm -f $(am__CONFIG_DISTCLEAN_FILES)
-        -rm -f Makefile
-distclean-am: clean-am distclean-generic distclean-hdr \
-        distclean-libtool distclean-tags
-
-dvi: dvi-recursive
-
-dvi-am:
-
-html: html-recursive
-
-html-am:
-
-info: info-recursive
-
-info-am:
-
-install-data-am: install-pkgconfigDATA
-
-install-dvi: install-dvi-recursive
-
-install-dvi-am:
-
-install-exec-am:
-
-install-html: install-html-recursive
-
-install-html-am:
-
-install-info: install-info-recursive
-
-install-info-am:
-
-install-man:
-
-install-pdf: install-pdf-recursive
-
-install-pdf-am:
-
-install-ps: install-ps-recursive
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-recursive
-        -rm -f $(am__CONFIG_DISTCLEAN_FILES)
-        -rm -rf $(top_srcdir)/autom4te.cache
-        -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-recursive
-
-mostlyclean-am: mostlyclean-generic mostlyclean-libtool
-
-pdf: pdf-recursive
-
-pdf-am:
-
-ps: ps-recursive
-
-ps-am:
-
-uninstall-am: uninstall-pkgconfigDATA
-
-.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all check-am \
-        ctags-recursive install-am install-strip tags-recursive
-
-.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
-        all all-am am--refresh check check-am check-local clean \
-        clean-generic clean-libtool clean-local ctags ctags-recursive \
-        dist dist-all dist-bzip2 dist-gzip dist-lzma dist-shar \
-        dist-tarZ dist-xz dist-zip distcheck distclean \
-        distclean-generic distclean-hdr distclean-libtool \
-        distclean-tags distcleancheck distdir distuninstallcheck dvi \
-        dvi-am html html-am info info-am install install-am \
-        install-data install-data-am install-dvi install-dvi-am \
-        install-exec install-exec-am install-html install-html-am \
-        install-info install-info-am install-man install-pdf \
-        install-pdf-am install-pkgconfigDATA install-ps install-ps-am \
-        install-strip installcheck installcheck-am installdirs \
-        installdirs-am maintainer-clean maintainer-clean-generic \
-        mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
-        ps ps-am tags tags-recursive uninstall uninstall-am \
-        uninstall-pkgconfigDATA
-
-
-.PHONY: doc coverage
-
-# Documentation
-
-doc:
-        @echo "entering doc/"
-        $(MAKE) -C doc doc
-
-# Unit tests
-
-@EFL_ENABLE_TESTS_TRUE@check-local:
-@EFL_ENABLE_TESTS_TRUE@ @./src/tests/eet_suite
-
-@EFL_ENABLE_TESTS_FALSE@check-local:
-@EFL_ENABLE_TESTS_FALSE@        @echo "reconfigure with --enable-tests"
-
-# Coverage report
-
-@EFL_ENABLE_COVERAGE_TRUE@lcov-reset:
-@EFL_ENABLE_COVERAGE_TRUE@      @rm -rf $(top_builddir)/coverage
-@EFL_ENABLE_COVERAGE_TRUE@      @find $(top_builddir) -name "*.gcda" -delete
-@EFL_ENABLE_COVERAGE_TRUE@      @lcov --zerocounters --directory $(top_builddir)
-
-@EFL_ENABLE_COVERAGE_TRUE@lcov-report:
-@EFL_ENABLE_COVERAGE_TRUE@      @mkdir $(top_builddir)/coverage
-@EFL_ENABLE_COVERAGE_TRUE@      lcov --capture --compat-libtool --output-file $(top_builddir)/coverage/coverage.info --directory $(top_builddir)
-@EFL_ENABLE_COVERAGE_TRUE@      lcov --remove $(top_builddir)/coverage/coverage.info '*.h' --output-file $(top_builddir)/coverage/coverage.cleaned.info
-@EFL_ENABLE_COVERAGE_TRUE@      genhtml -t "$(PACKAGE_STRING)" -o $(top_builddir)/coverage/html $(top_builddir)/coverage/coverage.cleaned.info
-@EFL_ENABLE_COVERAGE_TRUE@      @echo "Coverage Report at $(top_builddir)/coverage/html"
-
-@EFL_ENABLE_COVERAGE_TRUE@coverage:
-@EFL_ENABLE_COVERAGE_TRUE@      @$(MAKE) lcov-reset
-@EFL_ENABLE_COVERAGE_TRUE@      @$(MAKE) check
-@EFL_ENABLE_COVERAGE_TRUE@      @$(MAKE) lcov-report
-
-@EFL_ENABLE_COVERAGE_TRUE@clean-local:
-@EFL_ENABLE_COVERAGE_TRUE@      @rm -rf coverage
-@EFL_ENABLE_COVERAGE_FALSE@lcov-reset:
-@EFL_ENABLE_COVERAGE_FALSE@     @echo "reconfigure with --enable-coverage"
-
-@EFL_ENABLE_COVERAGE_FALSE@lcov-report:
-@EFL_ENABLE_COVERAGE_FALSE@     @echo "reconfigure with --enable-coverage"
-
-@EFL_ENABLE_COVERAGE_FALSE@coverage:
-@EFL_ENABLE_COVERAGE_FALSE@     @echo "reconfigure with --enable-tests --enable-coverage"
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/libraries/eet/NEWS b/libraries/eet/NEWS
deleted file mode 100644
index 1abe36e..0000000
--- a/libraries/eet/NEWS
+++ /dev/null
@@ -1,42 +0,0 @@
-Eet 1.6.0
-
-Changes since Eet 1.5.0:
---------------------------
-
-Additions:
-    * eet_file_get to return filenames of Eet_Files
-
-Improvements:
-
-    * most allocations moved to mempools
-    * support GNUTLS 3.x
-    * add "eet -t FILE.EET" to get some stat out of an eet file
-
-Eet 1.5.0
-
-Changes since Eet 1.4.0:
---------------------------
-
-Additions:
-
-    * EET_DATA_DESCRIPTOR_ADD_LIST_STRING API for string lists
-    * eet_node API's to manipulate nodes
-    * eet_alias_get API
-    * eet_data_xattr_cipher_get and eet_data_xattr_cipher_set APIs
-    * EET_DATA_DESCRIPTOR_ADD_BASIC_ARRAY API
-
-Fixes:
-
-    * eet shutdown on windows
-    * test case to init eet
-    * compilation against libjpeg 8 on windows
-    * binary open on windows
-    * unopenable empty eet file for read/write
-
-Improvements:
-
-    * better speed and memory footprint of EET_G_UNION and EET_G_ARRAY
-    * use stringshare for mmaped file names
-    * use eina locking wrappers
-    * use eina_file for file IO
-    * jpeg encode and decode quality improved at expense of speed
diff --git a/libraries/eet/README b/libraries/eet/README
deleted file mode 100644
index 416214b..0000000
--- a/libraries/eet/README
+++ /dev/null
@@ -1,68 +0,0 @@
-Eet 1.6.0
-
-******************************************************************************
-
- FOR ANY ISSUES PLEASE EMAIL:
- enlightenment-devel@lists.sourceforge.net
-
-******************************************************************************
-
-Requirements:
--------------
-Must have:
-  libc
-  zlib
-  libjpeg
-  eina (1.1.0 or better) 
-  (For windows you also need: evil)
-
-Optional requirements:
-  gnutls (1.7.6 or better)
-  openssl
-
-Eet is a tiny library designed to write an arbitrary set of chunks of
-data to a file and optionally compress each chunk (very much like a
-zip file) and allow fast random-access reading of the file later
-on. It does not do zip as a zip itself has more complexity than is
-needed, and it was much simpler to implement this once here.
-
-It also can encode and decode data structures in memory, as well as
-image data for saving to eet files or sending across the network to
-other machines, or just writing to arbitrary files on the system. All
-data is encoded in a platform independent way and can be written and
-read by any architecture. This data once encoded can be sent to
-another process or machine and decoded on the other end without
-needing to go into an eet file. Eet can also optionally encrypt files
-and use digital signatures (with gnutls or openssl support).
-
-------------------------------------------------------------------------------
-COMPILING AND INSTALLING:
-
-  ./configure
-  make
-(do this as root unless you are installing in your users directories):
-  make install
-
-To get the coverage report:
-    make coverage
-The report is created in the coverage/ subdir
-If you want to be able to run coverage test over eet, you will need gcov 
-(usually any distro provides it) and lcov from:
-  http://ltp.sourceforge.net/coverage/lcov.php.
-For coverage support you also need "make check" support with the check
-library (see below).
- 
-For compilation with MinGW, fnmatch.h is probably missing. That file can be
-found here:
-  http://www.koders.com/c/fid2B518462CB1EED3D4E31E271DB83CD1582F6EEBE.aspx
-It should be installed in the mingw include directory.
-
-For compilation with mingw32ce, run configure with the option
-  --host=arm-wince-mingw32ce
-
-For compilation with cegcc, follow the wiki:
-  http://wiki.enlightenment.org/index.php/Category:EFL_Windows_CE
-
-If you want to be able to run "make check", you need library check
-  from http://check.sourceforge.net/
-
diff --git a/libraries/eet/aclocal.m4 b/libraries/eet/aclocal.m4
deleted file mode 100644
index 1d329e5..0000000
--- a/libraries/eet/aclocal.m4
+++ /dev/null
@@ -1,1185 +0,0 @@
-# generated automatically by aclocal 1.11.1 -*- Autoconf -*-
-
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
-# 2005, 2006, 2007, 2008, 2009  Free Software Foundation, Inc.
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-m4_ifndef([AC_AUTOCONF_VERSION],
-  [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
-m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.67],,
-[m4_warning([this file was generated for autoconf 2.67.
-You have another version of autoconf.  It may work, but is not guaranteed to.
-If you have problems, you may need to regenerate the build system entirely.
-To do so, use the procedure documented by the package, typically `autoreconf'.])])
-
-# pkg.m4 - Macros to locate and utilise pkg-config.            -*- Autoconf -*-
-# serial 1 (pkg-config-0.24)
-# 
-# Copyright © 2004 Scott James Remnant <scott@netsplit.com>.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# PKG_PROG_PKG_CONFIG([MIN-VERSION])
-# ----------------------------------
-AC_DEFUN([PKG_PROG_PKG_CONFIG],
-[m4_pattern_forbid([^_?PKG_[A-Z_]+$])
-m4_pattern_allow([^PKG_CONFIG(_PATH)?$])
-AC_ARG_VAR([PKG_CONFIG], [path to pkg-config utility])
-AC_ARG_VAR([PKG_CONFIG_PATH], [directories to add to pkg-config's search path])
-AC_ARG_VAR([PKG_CONFIG_LIBDIR], [path overriding pkg-config's built-in search path])
-
-if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then
-        AC_PATH_TOOL([PKG_CONFIG], [pkg-config])
-fi
-if test -n "$PKG_CONFIG"; then
-        _pkg_min_version=m4_default([$1], [0.9.0])
-        AC_MSG_CHECKING([pkg-config is at least version $_pkg_min_version])
-        if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then
-                AC_MSG_RESULT([yes])
-        else
-                AC_MSG_RESULT([no])
-                PKG_CONFIG=""
-        fi
-fi[]dnl
-])# PKG_PROG_PKG_CONFIG
-
-# PKG_CHECK_EXISTS(MODULES, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND])
-#
-# Check to see whether a particular set of modules exists.  Similar
-# to PKG_CHECK_MODULES(), but does not set variables or print errors.
-#
-# Please remember that m4 expands AC_REQUIRE([PKG_PROG_PKG_CONFIG])
-# only at the first occurence in configure.ac, so if the first place
-# it's called might be skipped (such as if it is within an "if", you
-# have to call PKG_CHECK_EXISTS manually
-# --------------------------------------------------------------
-AC_DEFUN([PKG_CHECK_EXISTS],
-[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl
-if test -n "$PKG_CONFIG" && \
-    AC_RUN_LOG([$PKG_CONFIG --exists --print-errors "$1"]); then
-  m4_default([$2], [:])
-m4_ifvaln([$3], [else
-  $3])dnl
-fi])
-
-# _PKG_CONFIG([VARIABLE], [COMMAND], [MODULES])
-# ---------------------------------------------
-m4_define([_PKG_CONFIG],
-[if test -n "$$1"; then
-    pkg_cv_[]$1="$$1"
- elif test -n "$PKG_CONFIG"; then
-    PKG_CHECK_EXISTS([$3],
-                     [pkg_cv_[]$1=`$PKG_CONFIG --[]$2 "$3" 2>/dev/null`],
-                     [pkg_failed=yes])
- else
-    pkg_failed=untried
-fi[]dnl
-])# _PKG_CONFIG
-
-# _PKG_SHORT_ERRORS_SUPPORTED
-# -----------------------------
-AC_DEFUN([_PKG_SHORT_ERRORS_SUPPORTED],
-[AC_REQUIRE([PKG_PROG_PKG_CONFIG])
-if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then
-        _pkg_short_errors_supported=yes
-else
-        _pkg_short_errors_supported=no
-fi[]dnl
-])# _PKG_SHORT_ERRORS_SUPPORTED
-
-
-# PKG_CHECK_MODULES(VARIABLE-PREFIX, MODULES, [ACTION-IF-FOUND],
-# [ACTION-IF-NOT-FOUND])
-#
-#
-# Note that if there is a possibility the first call to
-# PKG_CHECK_MODULES might not happen, you should be sure to include an
-# explicit call to PKG_PROG_PKG_CONFIG in your configure.ac
-#
-#
-# --------------------------------------------------------------
-AC_DEFUN([PKG_CHECK_MODULES],
-[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl
-AC_ARG_VAR([$1][_CFLAGS], [C compiler flags for $1, overriding pkg-config])dnl
-AC_ARG_VAR([$1][_LIBS], [linker flags for $1, overriding pkg-config])dnl
-
-pkg_failed=no
-AC_MSG_CHECKING([for $1])
-
-_PKG_CONFIG([$1][_CFLAGS], [cflags], [$2])
-_PKG_CONFIG([$1][_LIBS], [libs], [$2])
-
-m4_define([_PKG_TEXT], [Alternatively, you may set the environment variables $1[]_CFLAGS
-and $1[]_LIBS to avoid the need to call pkg-config.
-See the pkg-config man page for more details.])
-
-if test $pkg_failed = yes; then
-        AC_MSG_RESULT([no])
-        _PKG_SHORT_ERRORS_SUPPORTED
-        if test $_pkg_short_errors_supported = yes; then
-                $1[]_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "$2" 2>&1`
-        else 
-                $1[]_PKG_ERRORS=`$PKG_CONFIG --print-errors "$2" 2>&1`
-        fi
-        # Put the nasty error message in config.log where it belongs
-        echo "$$1[]_PKG_ERRORS" >&AS_MESSAGE_LOG_FD
-
-        m4_default([$4], [AC_MSG_ERROR(
-[Package requirements ($2) were not met:
-
-$$1_PKG_ERRORS
-
-Consider adjusting the PKG_CONFIG_PATH environment variable if you
-installed software in a non-standard prefix.
-
-_PKG_TEXT])[]dnl
-        ])
-elif test $pkg_failed = untried; then
-        AC_MSG_RESULT([no])
-        m4_default([$4], [AC_MSG_FAILURE(
-[The pkg-config script could not be found or is too old.  Make sure it
-is in your PATH or set the PKG_CONFIG environment variable to the full
-path to pkg-config.
-
-_PKG_TEXT
-
-To get pkg-config, see <http://pkg-config.freedesktop.org/>.])[]dnl
-        ])
-else
-        $1[]_CFLAGS=$pkg_cv_[]$1[]_CFLAGS
-        $1[]_LIBS=$pkg_cv_[]$1[]_LIBS
-        AC_MSG_RESULT([yes])
-        $3
-fi[]dnl
-])# PKG_CHECK_MODULES
-
-# Copyright (C) 2002, 2003, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_AUTOMAKE_VERSION(VERSION)
-# ----------------------------
-# Automake X.Y traces this macro to ensure aclocal.m4 has been
-# generated from the m4 files accompanying Automake X.Y.
-# (This private macro should not be called outside this file.)
-AC_DEFUN([AM_AUTOMAKE_VERSION],
-[am__api_version='1.11'
-dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
-dnl require some minimum version.  Point them to the right macro.
-m4_if([$1], [1.11.1], [],
-      [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
-])
-
-# _AM_AUTOCONF_VERSION(VERSION)
-# -----------------------------
-# aclocal traces this macro to find the Autoconf version.
-# This is a private macro too.  Using m4_define simplifies
-# the logic in aclocal, which can simply ignore this definition.
-m4_define([_AM_AUTOCONF_VERSION], [])
-
-# AM_SET_CURRENT_AUTOMAKE_VERSION
-# -------------------------------
-# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
-# This function is AC_REQUIREd by AM_INIT_AUTOMAKE.
-AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
-[AM_AUTOMAKE_VERSION([1.11.1])dnl
-m4_ifndef([AC_AUTOCONF_VERSION],
-  [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
-_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))])
-
-# AM_AUX_DIR_EXPAND                                         -*- Autoconf -*-
-
-# Copyright (C) 2001, 2003, 2005  Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
-# $ac_aux_dir to `$srcdir/foo'.  In other projects, it is set to
-# `$srcdir', `$srcdir/..', or `$srcdir/../..'.
-#
-# Of course, Automake must honor this variable whenever it calls a
-# tool from the auxiliary directory.  The problem is that $srcdir (and
-# therefore $ac_aux_dir as well) can be either absolute or relative,
-# depending on how configure is run.  This is pretty annoying, since
-# it makes $ac_aux_dir quite unusable in subdirectories: in the top
-# source directory, any form will work fine, but in subdirectories a
-# relative path needs to be adjusted first.
-#
-# $ac_aux_dir/missing
-#    fails when called from a subdirectory if $ac_aux_dir is relative
-# $top_srcdir/$ac_aux_dir/missing
-#    fails if $ac_aux_dir is absolute,
-#    fails when called from a subdirectory in a VPATH build with
-#          a relative $ac_aux_dir
-#
-# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
-# are both prefixed by $srcdir.  In an in-source build this is usually
-# harmless because $srcdir is `.', but things will broke when you
-# start a VPATH build or use an absolute $srcdir.
-#
-# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
-# iff we strip the leading $srcdir from $ac_aux_dir.  That would be:
-#   am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
-# and then we would define $MISSING as
-#   MISSING="\${SHELL} $am_aux_dir/missing"
-# This will work as long as MISSING is not called from configure, because
-# unfortunately $(top_srcdir) has no meaning in configure.
-# However there are other variables, like CC, which are often used in
-# configure, and could therefore not use this "fixed" $ac_aux_dir.
-#
-# Another solution, used here, is to always expand $ac_aux_dir to an
-# absolute PATH.  The drawback is that using absolute paths prevent a
-# configured tree to be moved without reconfiguration.
-
-AC_DEFUN([AM_AUX_DIR_EXPAND],
-[dnl Rely on autoconf to set up CDPATH properly.
-AC_PREREQ([2.50])dnl
-# expand $ac_aux_dir to an absolute path
-am_aux_dir=`cd $ac_aux_dir && pwd`
-])
-
-# AM_CONDITIONAL                                            -*- Autoconf -*-
-
-# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006, 2008
-# Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 9
-
-# AM_CONDITIONAL(NAME, SHELL-CONDITION)
-# -------------------------------------
-# Define a conditional.
-AC_DEFUN([AM_CONDITIONAL],
-[AC_PREREQ(2.52)dnl
- ifelse([$1], [TRUE],  [AC_FATAL([$0: invalid condition: $1])],
-        [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
-AC_SUBST([$1_TRUE])dnl
-AC_SUBST([$1_FALSE])dnl
-_AM_SUBST_NOTMAKE([$1_TRUE])dnl
-_AM_SUBST_NOTMAKE([$1_FALSE])dnl
-m4_define([_AM_COND_VALUE_$1], [$2])dnl
-if $2; then
-  $1_TRUE=
-  $1_FALSE='#'
-else
-  $1_TRUE='#'
-  $1_FALSE=
-fi
-AC_CONFIG_COMMANDS_PRE(
-[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
-  AC_MSG_ERROR([[conditional "$1" was never defined.
-Usually this means the macro was only invoked conditionally.]])
-fi])])
-
-# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2009
-# Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 10
-
-# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
-# written in clear, in which case automake, when reading aclocal.m4,
-# will think it sees a *use*, and therefore will trigger all it's
-# C support machinery.  Also note that it means that autoscan, seeing
-# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
-
-
-# _AM_DEPENDENCIES(NAME)
-# ----------------------
-# See how the compiler implements dependency checking.
-# NAME is "CC", "CXX", "GCJ", or "OBJC".
-# We try a few techniques and use that to set a single cache variable.
-#
-# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
-# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
-# dependency, and given that the user is not expected to run this macro,
-# just rely on AC_PROG_CC.
-AC_DEFUN([_AM_DEPENDENCIES],
-[AC_REQUIRE([AM_SET_DEPDIR])dnl
-AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
-AC_REQUIRE([AM_MAKE_INCLUDE])dnl
-AC_REQUIRE([AM_DEP_TRACK])dnl
-
-ifelse([$1], CC,   [depcc="$CC"   am_compiler_list=],
-       [$1], CXX,  [depcc="$CXX"  am_compiler_list=],
-       [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
-       [$1], UPC,  [depcc="$UPC"  am_compiler_list=],
-       [$1], GCJ,  [depcc="$GCJ"  am_compiler_list='gcc3 gcc'],
-                   [depcc="$$1"   am_compiler_list=])
-
-AC_CACHE_CHECK([dependency style of $depcc],
-               [am_cv_$1_dependencies_compiler_type],
-[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
-  # We make a subdir and do the tests there.  Otherwise we can end up
-  # making bogus files that we don't know about and never remove.  For
-  # instance it was reported that on HP-UX the gcc test will end up
-  # making a dummy file named `D' -- because `-MD' means `put the output
-  # in D'.
-  mkdir conftest.dir
-  # Copy depcomp to subdir because otherwise we won't find it if we're
-  # using a relative directory.
-  cp "$am_depcomp" conftest.dir
-  cd conftest.dir
-  # We will build objects and dependencies in a subdirectory because
-  # it helps to detect inapplicable dependency modes.  For instance
-  # both Tru64's cc and ICC support -MD to output dependencies as a
-  # side effect of compilation, but ICC will put the dependencies in
-  # the current directory while Tru64 will put them in the object
-  # directory.
-  mkdir sub
-
-  am_cv_$1_dependencies_compiler_type=none
-  if test "$am_compiler_list" = ""; then
-     am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
-  fi
-  am__universal=false
-  m4_case([$1], [CC],
-    [case " $depcc " in #(
-     *\ -arch\ *\ -arch\ *) am__universal=true ;;
-     esac],
-    [CXX],
-    [case " $depcc " in #(
-     *\ -arch\ *\ -arch\ *) am__universal=true ;;
-     esac])
-
-  for depmode in $am_compiler_list; do
-    # Setup a source with many dependencies, because some compilers
-    # like to wrap large dependency lists on column 80 (with \), and
-    # we should not choose a depcomp mode which is confused by this.
-    #
-    # We need to recreate these files for each test, as the compiler may
-    # overwrite some of them when testing with obscure command lines.
-    # This happens at least with the AIX C compiler.
-    : > sub/conftest.c
-    for i in 1 2 3 4 5 6; do
-      echo '#include "conftst'$i'.h"' >> sub/conftest.c
-      # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
-      # Solaris 8's {/usr,}/bin/sh.
-      touch sub/conftst$i.h
-    done
-    echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
-
-    # We check with `-c' and `-o' for the sake of the "dashmstdout"
-    # mode.  It turns out that the SunPro C++ compiler does not properly
-    # handle `-M -o', and we need to detect this.  Also, some Intel
-    # versions had trouble with output in subdirs
-    am__obj=sub/conftest.${OBJEXT-o}
-    am__minus_obj="-o $am__obj"
-    case $depmode in
-    gcc)
-      # This depmode causes a compiler race in universal mode.
-      test "$am__universal" = false || continue
-      ;;
-    nosideeffect)
-      # after this tag, mechanisms are not by side-effect, so they'll
-      # only be used when explicitly requested
-      if test "x$enable_dependency_tracking" = xyes; then
-        continue
-      else
-        break
-      fi
-      ;;
-    msvisualcpp | msvcmsys)
-      # This compiler won't grok `-c -o', but also, the minuso test has
-      # not run yet.  These depmodes are late enough in the game, and
-      # so weak that their functioning should not be impacted.
-      am__obj=conftest.${OBJEXT-o}
-      am__minus_obj=
-      ;;
-    none) break ;;
-    esac
-    if depmode=$depmode \
-       source=sub/conftest.c object=$am__obj \
-       depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
-       $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
-         >/dev/null 2>conftest.err &&
-       grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
-       grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
-       grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
-       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
-      # icc doesn't choke on unknown options, it will just issue warnings
-      # or remarks (even with -Werror).  So we grep stderr for any message
-      # that says an option was ignored or not supported.
-      # When given -MP, icc 7.0 and 7.1 complain thusly:
-      #   icc: Command line warning: ignoring option '-M'; no argument required
-      # The diagnosis changed in icc 8.0:
-      #   icc: Command line remark: option '-MP' not supported
-      if (grep 'ignoring option' conftest.err ||
-          grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
-        am_cv_$1_dependencies_compiler_type=$depmode
-        break
-      fi
-    fi
-  done
-
-  cd ..
-  rm -rf conftest.dir
-else
-  am_cv_$1_dependencies_compiler_type=none
-fi
-])
-AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])
-AM_CONDITIONAL([am__fastdep$1], [
-  test "x$enable_dependency_tracking" != xno \
-  && test "$am_cv_$1_dependencies_compiler_type" = gcc3])
-])
-
-
-# AM_SET_DEPDIR
-# -------------
-# Choose a directory name for dependency files.
-# This macro is AC_REQUIREd in _AM_DEPENDENCIES
-AC_DEFUN([AM_SET_DEPDIR],
-[AC_REQUIRE([AM_SET_LEADING_DOT])dnl
-AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl
-])
-
-
-# AM_DEP_TRACK
-# ------------
-AC_DEFUN([AM_DEP_TRACK],
-[AC_ARG_ENABLE(dependency-tracking,
-[  --disable-dependency-tracking  speeds up one-time build
-  --enable-dependency-tracking   do not reject slow dependency extractors])
-if test "x$enable_dependency_tracking" != xno; then
-  am_depcomp="$ac_aux_dir/depcomp"
-  AMDEPBACKSLASH='\'
-fi
-AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
-AC_SUBST([AMDEPBACKSLASH])dnl
-_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl
-])
-
-# Generate code to set up dependency tracking.              -*- Autoconf -*-
-
-# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2008
-# Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-#serial 5
-
-# _AM_OUTPUT_DEPENDENCY_COMMANDS
-# ------------------------------
-AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
-[{
-  # Autoconf 2.62 quotes --file arguments for eval, but not when files
-  # are listed without --file.  Let's play safe and only enable the eval
-  # if we detect the quoting.
-  case $CONFIG_FILES in
-  *\'*) eval set x "$CONFIG_FILES" ;;
-  *)   set x $CONFIG_FILES ;;
-  esac
-  shift
-  for mf
-  do
-    # Strip MF so we end up with the name of the file.
-    mf=`echo "$mf" | sed -e 's/:.*$//'`
-    # Check whether this is an Automake generated Makefile or not.
-    # We used to match only the files named `Makefile.in', but
-    # some people rename them; so instead we look at the file content.
-    # Grep'ing the first line is not enough: some people post-process
-    # each Makefile.in and add a new line on top of each file to say so.
-    # Grep'ing the whole file is not good either: AIX grep has a line
-    # limit of 2048, but all sed's we know have understand at least 4000.
-    if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
-      dirpart=`AS_DIRNAME("$mf")`
-    else
-      continue
-    fi
-    # Extract the definition of DEPDIR, am__include, and am__quote
-    # from the Makefile without running `make'.
-    DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
-    test -z "$DEPDIR" && continue
-    am__include=`sed -n 's/^am__include = //p' < "$mf"`
-    test -z "am__include" && continue
-    am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
-    # When using ansi2knr, U may be empty or an underscore; expand it
-    U=`sed -n 's/^U = //p' < "$mf"`
-    # Find all dependency output files, they are included files with
-    # $(DEPDIR) in their names.  We invoke sed twice because it is the
-    # simplest approach to changing $(DEPDIR) to its actual value in the
-    # expansion.
-    for file in `sed -n "
-      s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
-         sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
-      # Make sure the directory exists.
-      test -f "$dirpart/$file" && continue
-      fdir=`AS_DIRNAME(["$file"])`
-      AS_MKDIR_P([$dirpart/$fdir])
-      # echo "creating $dirpart/$file"
-      echo '# dummy' > "$dirpart/$file"
-    done
-  done
-}
-])# _AM_OUTPUT_DEPENDENCY_COMMANDS
-
-
-# AM_OUTPUT_DEPENDENCY_COMMANDS
-# -----------------------------
-# This macro should only be invoked once -- use via AC_REQUIRE.
-#
-# This code is only required when automatic dependency tracking
-# is enabled.  FIXME.  This creates each `.P' file that we will
-# need in order to bootstrap the dependency handling code.
-AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
-[AC_CONFIG_COMMANDS([depfiles],
-     [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
-     [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
-])
-
-# Do all the work for Automake.                             -*- Autoconf -*-
-
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
-# 2005, 2006, 2008, 2009 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 16
-
-# This macro actually does too much.  Some checks are only needed if
-# your package does certain things.  But this isn't really a big deal.
-
-# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
-# AM_INIT_AUTOMAKE([OPTIONS])
-# -----------------------------------------------
-# The call with PACKAGE and VERSION arguments is the old style
-# call (pre autoconf-2.50), which is being phased out.  PACKAGE
-# and VERSION should now be passed to AC_INIT and removed from
-# the call to AM_INIT_AUTOMAKE.
-# We support both call styles for the transition.  After
-# the next Automake release, Autoconf can make the AC_INIT
-# arguments mandatory, and then we can depend on a new Autoconf
-# release and drop the old call support.
-AC_DEFUN([AM_INIT_AUTOMAKE],
-[AC_PREREQ([2.62])dnl
-dnl Autoconf wants to disallow AM_ names.  We explicitly allow
-dnl the ones we care about.
-m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
-AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
-AC_REQUIRE([AC_PROG_INSTALL])dnl
-if test "`cd $srcdir && pwd`" != "`pwd`"; then
-  # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
-  # is not polluted with repeated "-I."
-  AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl
-  # test to see if srcdir already configured
-  if test -f $srcdir/config.status; then
-    AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
-  fi
-fi
-
-# test whether we have cygpath
-if test -z "$CYGPATH_W"; then
-  if (cygpath --version) >/dev/null 2>/dev/null; then
-    CYGPATH_W='cygpath -w'
-  else
-    CYGPATH_W=echo
-  fi
-fi
-AC_SUBST([CYGPATH_W])
-
-# Define the identity of the package.
-dnl Distinguish between old-style and new-style calls.
-m4_ifval([$2],
-[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
- AC_SUBST([PACKAGE], [$1])dnl
- AC_SUBST([VERSION], [$2])],
-[_AM_SET_OPTIONS([$1])dnl
-dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT.
-m4_if(m4_ifdef([AC_PACKAGE_NAME], 1)m4_ifdef([AC_PACKAGE_VERSION], 1), 11,,
-  [m4_fatal([AC_INIT should be called with package and version arguments])])dnl
- AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
- AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
-
-_AM_IF_OPTION([no-define],,
-[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
- AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl
-
-# Some tools Automake needs.
-AC_REQUIRE([AM_SANITY_CHECK])dnl
-AC_REQUIRE([AC_ARG_PROGRAM])dnl
-AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version})
-AM_MISSING_PROG(AUTOCONF, autoconf)
-AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version})
-AM_MISSING_PROG(AUTOHEADER, autoheader)
-AM_MISSING_PROG(MAKEINFO, makeinfo)
-AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
-AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl
-AC_REQUIRE([AM_PROG_MKDIR_P])dnl
-# We need awk for the "check" target.  The system "awk" is bad on
-# some platforms.
-AC_REQUIRE([AC_PROG_AWK])dnl
-AC_REQUIRE([AC_PROG_MAKE_SET])dnl
-AC_REQUIRE([AM_SET_LEADING_DOT])dnl
-_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
-              [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
-                             [_AM_PROG_TAR([v7])])])
-_AM_IF_OPTION([no-dependencies],,
-[AC_PROVIDE_IFELSE([AC_PROG_CC],
-                  [_AM_DEPENDENCIES(CC)],
-                  [define([AC_PROG_CC],
-                          defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl
-AC_PROVIDE_IFELSE([AC_PROG_CXX],
-                  [_AM_DEPENDENCIES(CXX)],
-                  [define([AC_PROG_CXX],
-                          defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl
-AC_PROVIDE_IFELSE([AC_PROG_OBJC],
-                  [_AM_DEPENDENCIES(OBJC)],
-                  [define([AC_PROG_OBJC],
-                          defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl
-])
-_AM_IF_OPTION([silent-rules], [AC_REQUIRE([AM_SILENT_RULES])])dnl
-dnl The `parallel-tests' driver may need to know about EXEEXT, so add the
-dnl `am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen.  This macro
-dnl is hooked onto _AC_COMPILER_EXEEXT early, see below.
-AC_CONFIG_COMMANDS_PRE(dnl
-[m4_provide_if([_AM_COMPILER_EXEEXT],
-  [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl
-])
-
-dnl Hook into `_AC_COMPILER_EXEEXT' early to learn its expansion.  Do not
-dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further
-dnl mangled by Autoconf and run in a shell conditional statement.
-m4_define([_AC_COMPILER_EXEEXT],
-m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])])
-
-
-# When config.status generates a header, we must update the stamp-h file.
-# This file resides in the same directory as the config header
-# that is generated.  The stamp files are numbered to have different names.
-
-# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the
-# loop where config.status creates the headers, so we can generate
-# our stamp files there.
-AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
-[# Compute $1's index in $config_headers.
-_am_arg=$1
-_am_stamp_count=1
-for _am_header in $config_headers :; do
-  case $_am_header in
-    $_am_arg | $_am_arg:* )
-      break ;;
-    * )
-      _am_stamp_count=`expr $_am_stamp_count + 1` ;;
-  esac
-done
-echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count])
-
-# Copyright (C) 2001, 2003, 2005, 2008  Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_PROG_INSTALL_SH
-# ------------------
-# Define $install_sh.
-AC_DEFUN([AM_PROG_INSTALL_SH],
-[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
-if test x"${install_sh}" != xset; then
-  case $am_aux_dir in
-  *\ * | *\     *)
-    install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
-  *)
-    install_sh="\${SHELL} $am_aux_dir/install-sh"
-  esac
-fi
-AC_SUBST(install_sh)])
-
-# Copyright (C) 2003, 2005  Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 2
-
-# Check whether the underlying file-system supports filenames
-# with a leading dot.  For instance MS-DOS doesn't.
-AC_DEFUN([AM_SET_LEADING_DOT],
-[rm -rf .tst 2>/dev/null
-mkdir .tst 2>/dev/null
-if test -d .tst; then
-  am__leading_dot=.
-else
-  am__leading_dot=_
-fi
-rmdir .tst 2>/dev/null
-AC_SUBST([am__leading_dot])])
-
-# Check to see how 'make' treats includes.                  -*- Autoconf -*-
-
-# Copyright (C) 2001, 2002, 2003, 2005, 2009  Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 4
-
-# AM_MAKE_INCLUDE()
-# -----------------
-# Check to see how make treats includes.
-AC_DEFUN([AM_MAKE_INCLUDE],
-[am_make=${MAKE-make}
-cat > confinc << 'END'
-am__doit:
-        @echo this is the am__doit target
-.PHONY: am__doit
-END
-# If we don't find an include directive, just comment out the code.
-AC_MSG_CHECKING([for style of include used by $am_make])
-am__include="#"
-am__quote=
-_am_result=none
-# First try GNU make style include.
-echo "include confinc" > confmf
-# Ignore all kinds of additional output from `make'.
-case `$am_make -s -f confmf 2> /dev/null` in #(
-*the\ am__doit\ target*)
-  am__include=include
-  am__quote=
-  _am_result=GNU
-  ;;
-esac
-# Now try BSD make style include.
-if test "$am__include" = "#"; then
-   echo '.include "confinc"' > confmf
-   case `$am_make -s -f confmf 2> /dev/null` in #(
-   *the\ am__doit\ target*)
-     am__include=.include
-     am__quote="\""
-     _am_result=BSD
-     ;;
-   esac
-fi
-AC_SUBST([am__include])
-AC_SUBST([am__quote])
-AC_MSG_RESULT([$_am_result])
-rm -f confinc confmf
-])
-
-# Copyright (C) 1999, 2000, 2001, 2003, 2004, 2005, 2008
-# Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 6
-
-# AM_PROG_CC_C_O
-# --------------
-# Like AC_PROG_CC_C_O, but changed for automake.
-AC_DEFUN([AM_PROG_CC_C_O],
-[AC_REQUIRE([AC_PROG_CC_C_O])dnl
-AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
-AC_REQUIRE_AUX_FILE([compile])dnl
-# FIXME: we rely on the cache variable name because
-# there is no other way.
-set dummy $CC
-am_cc=`echo $[2] | sed ['s/[^a-zA-Z0-9_]/_/g;s/^[0-9]/_/']`
-eval am_t=\$ac_cv_prog_cc_${am_cc}_c_o
-if test "$am_t" != yes; then
-   # Losing compiler, so override with the script.
-   # FIXME: It is wrong to rewrite CC.
-   # But if we don't then we get into trouble of one sort or another.
-   # A longer-term fix would be to have automake use am__CC in this case,
-   # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)"
-   CC="$am_aux_dir/compile $CC"
-fi
-dnl Make sure AC_PROG_CC is never called again, or it will override our
-dnl setting of CC.
-m4_define([AC_PROG_CC],
-          [m4_fatal([AC_PROG_CC cannot be called after AM_PROG_CC_C_O])])
-])
-
-# Fake the existence of programs that GNU maintainers use.  -*- Autoconf -*-
-
-# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005, 2008
-# Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 6
-
-# AM_MISSING_PROG(NAME, PROGRAM)
-# ------------------------------
-AC_DEFUN([AM_MISSING_PROG],
-[AC_REQUIRE([AM_MISSING_HAS_RUN])
-$1=${$1-"${am_missing_run}$2"}
-AC_SUBST($1)])
-
-
-# AM_MISSING_HAS_RUN
-# ------------------
-# Define MISSING if not defined so far and test if it supports --run.
-# If it does, set am_missing_run to use it, otherwise, to nothing.
-AC_DEFUN([AM_MISSING_HAS_RUN],
-[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
-AC_REQUIRE_AUX_FILE([missing])dnl
-if test x"${MISSING+set}" != xset; then
-  case $am_aux_dir in
-  *\ * | *\     *)
-    MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
-  *)
-    MISSING="\${SHELL} $am_aux_dir/missing" ;;
-  esac
-fi
-# Use eval to expand $SHELL
-if eval "$MISSING --run true"; then
-  am_missing_run="$MISSING --run "
-else
-  am_missing_run=
-  AC_MSG_WARN([`missing' script is too old or missing])
-fi
-])
-
-# Copyright (C) 2003, 2004, 2005, 2006  Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_PROG_MKDIR_P
-# ---------------
-# Check for `mkdir -p'.
-AC_DEFUN([AM_PROG_MKDIR_P],
-[AC_PREREQ([2.60])dnl
-AC_REQUIRE([AC_PROG_MKDIR_P])dnl
-dnl Automake 1.8 to 1.9.6 used to define mkdir_p.  We now use MKDIR_P,
-dnl while keeping a definition of mkdir_p for backward compatibility.
-dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile.
-dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of
-dnl Makefile.ins that do not define MKDIR_P, so we do our own
-dnl adjustment using top_builddir (which is defined more often than
-dnl MKDIR_P).
-AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl
-case $mkdir_p in
-  [[\\/$]]* | ?:[[\\/]]*) ;;
-  */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
-esac
-])
-
-# Helper functions for option handling.                     -*- Autoconf -*-
-
-# Copyright (C) 2001, 2002, 2003, 2005, 2008  Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 4
-
-# _AM_MANGLE_OPTION(NAME)
-# -----------------------
-AC_DEFUN([_AM_MANGLE_OPTION],
-[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
-
-# _AM_SET_OPTION(NAME)
-# ------------------------------
-# Set option NAME.  Presently that only means defining a flag for this option.
-AC_DEFUN([_AM_SET_OPTION],
-[m4_define(_AM_MANGLE_OPTION([$1]), 1)])
-
-# _AM_SET_OPTIONS(OPTIONS)
-# ----------------------------------
-# OPTIONS is a space-separated list of Automake options.
-AC_DEFUN([_AM_SET_OPTIONS],
-[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
-
-# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
-# -------------------------------------------
-# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
-AC_DEFUN([_AM_IF_OPTION],
-[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
-
-# Check to make sure that the build environment is sane.    -*- Autoconf -*-
-
-# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005, 2008
-# Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 5
-
-# AM_SANITY_CHECK
-# ---------------
-AC_DEFUN([AM_SANITY_CHECK],
-[AC_MSG_CHECKING([whether build environment is sane])
-# Just in case
-sleep 1
-echo timestamp > conftest.file
-# Reject unsafe characters in $srcdir or the absolute working directory
-# name.  Accept space and tab only in the latter.
-am_lf='
-'
-case `pwd` in
-  *[[\\\"\#\$\&\'\`$am_lf]]*)
-    AC_MSG_ERROR([unsafe absolute working directory name]);;
-esac
-case $srcdir in
-  *[[\\\"\#\$\&\'\`$am_lf\ \    ]]*)
-    AC_MSG_ERROR([unsafe srcdir value: `$srcdir']);;
-esac
-
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
-   if test "$[*]" = "X"; then
-      # -L didn't work.
-      set X `ls -t "$srcdir/configure" conftest.file`
-   fi
-   rm -f conftest.file
-   if test "$[*]" != "X $srcdir/configure conftest.file" \
-      && test "$[*]" != "X conftest.file $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
-alias in your environment])
-   fi
-
-   test "$[2]" = conftest.file
-   )
-then
-   # Ok.
-   :
-else
-   AC_MSG_ERROR([newly created file is older than distributed files!
-Check your system clock])
-fi
-AC_MSG_RESULT(yes)])
-
-# Copyright (C) 2009  Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 1
-
-# AM_SILENT_RULES([DEFAULT])
-# --------------------------
-# Enable less verbose build rules; with the default set to DEFAULT
-# (`yes' being less verbose, `no' or empty being verbose).
-AC_DEFUN([AM_SILENT_RULES],
-[AC_ARG_ENABLE([silent-rules],
-[  --enable-silent-rules          less verbose build output (undo: `make V=1')
-  --disable-silent-rules         verbose build output (undo: `make V=0')])
-case $enable_silent_rules in
-yes) AM_DEFAULT_VERBOSITY=0;;
-no)  AM_DEFAULT_VERBOSITY=1;;
-*)   AM_DEFAULT_VERBOSITY=m4_if([$1], [yes], [0], [1]);;
-esac
-AC_SUBST([AM_DEFAULT_VERBOSITY])dnl
-AM_BACKSLASH='\'
-AC_SUBST([AM_BACKSLASH])dnl
-_AM_SUBST_NOTMAKE([AM_BACKSLASH])dnl
-])
-
-# Copyright (C) 2001, 2003, 2005  Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_PROG_INSTALL_STRIP
-# ---------------------
-# One issue with vendor `install' (even GNU) is that you can't
-# specify the program used to strip binaries.  This is especially
-# annoying in cross-compiling environments, where the build's strip
-# is unlikely to handle the host's binaries.
-# Fortunately install-sh will honor a STRIPPROG variable, so we
-# always use install-sh in `make install-strip', and initialize
-# STRIPPROG with the value of the STRIP variable (set by the user).
-AC_DEFUN([AM_PROG_INSTALL_STRIP],
-[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
-# Installed binaries are usually stripped using `strip' when the user
-# run `make install-strip'.  However `strip' might not be the right
-# tool to use in cross-compilation environments, therefore Automake
-# will honor the `STRIP' environment variable to overrule this program.
-dnl Don't test for $cross_compiling = yes, because it might be `maybe'.
-if test "$cross_compiling" != no; then
-  AC_CHECK_TOOL([STRIP], [strip], :)
-fi
-INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
-AC_SUBST([INSTALL_STRIP_PROGRAM])])
-
-# Copyright (C) 2006, 2008  Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 2
-
-# _AM_SUBST_NOTMAKE(VARIABLE)
-# ---------------------------
-# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in.
-# This macro is traced by Automake.
-AC_DEFUN([_AM_SUBST_NOTMAKE])
-
-# AM_SUBST_NOTMAKE(VARIABLE)
-# ---------------------------
-# Public sister of _AM_SUBST_NOTMAKE.
-AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
-
-# Check how to create a tarball.                            -*- Autoconf -*-
-
-# Copyright (C) 2004, 2005  Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 2
-
-# _AM_PROG_TAR(FORMAT)
-# --------------------
-# Check how to create a tarball in format FORMAT.
-# FORMAT should be one of `v7', `ustar', or `pax'.
-#
-# Substitute a variable $(am__tar) that is a command
-# writing to stdout a FORMAT-tarball containing the directory
-# $tardir.
-#     tardir=directory && $(am__tar) > result.tar
-#
-# Substitute a variable $(am__untar) that extract such
-# a tarball read from stdin.
-#     $(am__untar) < result.tar
-AC_DEFUN([_AM_PROG_TAR],
-[# Always define AMTAR for backward compatibility.
-AM_MISSING_PROG([AMTAR], [tar])
-m4_if([$1], [v7],
-     [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'],
-     [m4_case([$1], [ustar],, [pax],,
-              [m4_fatal([Unknown tar format])])
-AC_MSG_CHECKING([how to create a $1 tar archive])
-# Loop over all known methods to create a tar archive until one works.
-_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
-_am_tools=${am_cv_prog_tar_$1-$_am_tools}
-# Do not fold the above two line into one, because Tru64 sh and
-# Solaris sh will not grok spaces in the rhs of `-'.
-for _am_tool in $_am_tools
-do
-  case $_am_tool in
-  gnutar)
-    for _am_tar in tar gnutar gtar;
-    do
-      AM_RUN_LOG([$_am_tar --version]) && break
-    done
-    am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
-    am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
-    am__untar="$_am_tar -xf -"
-    ;;
-  plaintar)
-    # Must skip GNU tar: if it does not support --format= it doesn't create
-    # ustar tarball either.
-    (tar --version) >/dev/null 2>&1 && continue
-    am__tar='tar chf - "$$tardir"'
-    am__tar_='tar chf - "$tardir"'
-    am__untar='tar xf -'
-    ;;
-  pax)
-    am__tar='pax -L -x $1 -w "$$tardir"'
-    am__tar_='pax -L -x $1 -w "$tardir"'
-    am__untar='pax -r'
-    ;;
-  cpio)
-    am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
-    am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
-    am__untar='cpio -i -H $1 -d'
-    ;;
-  none)
-    am__tar=false
-    am__tar_=false
-    am__untar=false
-    ;;
-  esac
-
-  # If the value was cached, stop now.  We just wanted to have am__tar
-  # and am__untar set.
-  test -n "${am_cv_prog_tar_$1}" && break
-
-  # tar/untar a dummy directory, and stop if the command works
-  rm -rf conftest.dir
-  mkdir conftest.dir
-  echo GrepMe > conftest.dir/file
-  AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
-  rm -rf conftest.dir
-  if test -s conftest.tar; then
-    AM_RUN_LOG([$am__untar <conftest.tar])
-    grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
-  fi
-done
-rm -rf conftest.dir
-
-AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
-AC_MSG_RESULT([$am_cv_prog_tar_$1])])
-AC_SUBST([am__tar])
-AC_SUBST([am__untar])
-]) # _AM_PROG_TAR
-
-m4_include([m4/ac_attribute.m4])
-m4_include([m4/ac_path_generic.m4])
-m4_include([m4/efl_binary.m4])
-m4_include([m4/efl_compiler_flag.m4])
-m4_include([m4/efl_coverage.m4])
-m4_include([m4/efl_doxygen.m4])
-m4_include([m4/efl_fnmatch.m4])
-m4_include([m4/efl_path_max.m4])
-m4_include([m4/efl_tests.m4])
-m4_include([m4/libtool.m4])
-m4_include([m4/ltoptions.m4])
-m4_include([m4/ltsugar.m4])
-m4_include([m4/ltversion.m4])
-m4_include([m4/lt~obsolete.m4])
diff --git a/libraries/eet/autogen.sh b/libraries/eet/autogen.sh
deleted file mode 100755
index 72e1033..0000000
--- a/libraries/eet/autogen.sh
+++ /dev/null
@@ -1,38 +0,0 @@
-#!/bin/sh
-
-rm -rf autom4te.cache
-rm -f aclocal.m4 ltmain.sh
-
-touch ABOUT-NLS
-
-echo "Running aclocal..." ; aclocal $ACLOCAL_FLAGS -I m4 || exit 1
-echo "Running autoheader..." ; autoheader || exit 1
-echo "Running autoconf..." ; autoconf || exit 1
-echo "Running libtoolize..." ; (libtoolize --copy --automake || glibtoolize --automake) || exit 1
-echo "Running automake..." ; automake --add-missing --copy --gnu || exit 1
-
-W=0
-
-rm -f config.cache-env.tmp
-echo "OLD_PARM=\"$@\"" >> config.cache-env.tmp
-echo "OLD_CFLAGS=\"$CFLAGS\"" >> config.cache-env.tmp
-echo "OLD_PATH=\"$PATH\"" >> config.cache-env.tmp
-echo "OLD_PKG_CONFIG_PATH=\"$PKG_CONFIG_PATH\"" >> config.cache-env.tmp
-echo "OLD_LDFLAGS=\"$LDFLAGS\"" >> config.cache-env.tmp
-
-cmp config.cache-env.tmp config.cache-env >> /dev/null
-if [ $? -ne 0 ]; then
-        W=1;
-fi
-
-if [ $W -ne 0 ]; then
-        echo "Cleaning configure cache...";
-        rm -f config.cache config.cache-env
-        mv config.cache-env.tmp config.cache-env
-else
-        rm -f config.cache-env.tmp
-fi
-
-if [ -z "$NOCONFIGURE" ]; then
-        ./configure -C "$@"
-fi
diff --git a/libraries/eet/compile b/libraries/eet/compile
deleted file mode 100755
index c0096a7..0000000
--- a/libraries/eet/compile
+++ /dev/null
@@ -1,143 +0,0 @@
-#! /bin/sh
-# Wrapper for compilers which do not understand `-c -o'.
-
-scriptversion=2009-10-06.20; # UTC
-
-# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2009  Free Software
-# Foundation, Inc.
-# Written by Tom Tromey <tromey@cygnus.com>.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# This file is maintained in Automake, please report
-# bugs to <bug-automake@gnu.org> or send patches to
-# <automake-patches@gnu.org>.
-
-case $1 in
-  '')
-     echo "$0: No command.  Try \`$0 --help' for more information." 1>&2
-     exit 1;
-     ;;
-  -h | --h*)
-    cat <<\EOF
-Usage: compile [--help] [--version] PROGRAM [ARGS]
-
-Wrapper for compilers which do not understand `-c -o'.
-Remove `-o dest.o' from ARGS, run PROGRAM with the remaining
-arguments, and rename the output as expected.
-
-If you are trying to build a whole package this is not the
-right script to run: please start by reading the file `INSTALL'.
-
-Report bugs to <bug-automake@gnu.org>.
-EOF
-    exit $?
-    ;;
-  -v | --v*)
-    echo "compile $scriptversion"
-    exit $?
-    ;;
-esac
-
-ofile=
-cfile=
-eat=
-
-for arg
-do
-  if test -n "$eat"; then
-    eat=
-  else
-    case $1 in
-      -o)
-        # configure might choose to run compile as `compile cc -o foo foo.c'.
-        # So we strip `-o arg' only if arg is an object.
-        eat=1
-        case $2 in
-          *.o | *.obj)
-            ofile=$2
-            ;;
-          *)
-            set x "$@" -o "$2"
-            shift
-            ;;
-        esac
-        ;;
-      *.c)
-        cfile=$1
-        set x "$@" "$1"
-        shift
-        ;;
-      *)
-        set x "$@" "$1"
-        shift
-        ;;
-    esac
-  fi
-  shift
-done
-
-if test -z "$ofile" || test -z "$cfile"; then
-  # If no `-o' option was seen then we might have been invoked from a
-  # pattern rule where we don't need one.  That is ok -- this is a
-  # normal compilation that the losing compiler can handle.  If no
-  # `.c' file was seen then we are probably linking.  That is also
-  # ok.
-  exec "$@"
-fi
-
-# Name of file we expect compiler to create.
-cofile=`echo "$cfile" | sed 's|^.*[\\/]||; s|^[a-zA-Z]:||; s/\.c$/.o/'`
-
-# Create the lock directory.
-# Note: use `[/\\:.-]' here to ensure that we don't use the same name
-# that we are using for the .o file.  Also, base the name on the expected
-# object file name, since that is what matters with a parallel build.
-lockdir=`echo "$cofile" | sed -e 's|[/\\:.-]|_|g'`.d
-while true; do
-  if mkdir "$lockdir" >/dev/null 2>&1; then
-    break
-  fi
-  sleep 1
-done
-# FIXME: race condition here if user kills between mkdir and trap.
-trap "rmdir '$lockdir'; exit 1" 1 2 15
-
-# Run the compile.
-"$@"
-ret=$?
-
-if test -f "$cofile"; then
-  test "$cofile" = "$ofile" || mv "$cofile" "$ofile"
-elif test -f "${cofile}bj"; then
-  test "${cofile}bj" = "$ofile" || mv "${cofile}bj" "$ofile"
-fi
-
-rmdir "$lockdir"
-exit $ret
-
-# Local Variables:
-# mode: shell-script
-# sh-indentation: 2
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC"
-# time-stamp-end: "; # UTC"
-# End:
diff --git a/libraries/eet/config.guess b/libraries/eet/config.guess
deleted file mode 100755
index c2246a4..0000000
--- a/libraries/eet/config.guess
+++ /dev/null
@@ -1,1502 +0,0 @@
-#! /bin/sh
-# Attempt to guess a canonical system name.
-#   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-#   2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
-#   Free Software Foundation, Inc.
-
-timestamp='2009-12-30'
-
-# This file is free software; you can redistribute it and/or modify it
-# under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA
-# 02110-1301, USA.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-
-# Originally written by Per Bothner.  Please send patches (context
-# diff format) to <config-patches@gnu.org> and include a ChangeLog
-# entry.
-#
-# This script attempts to guess a canonical system name similar to
-# config.sub.  If it succeeds, it prints the system name on stdout, and
-# exits with 0.  Otherwise, it exits with 1.
-#
-# You can get the latest version of this script from:
-# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD
-
-me=`echo "$0" | sed -e 's,.*/,,'`
-
-usage="\
-Usage: $0 [OPTION]
-
-Output the configuration name of the system \`$me' is run on.
-
-Operation modes:
-  -h, --help         print this help, then exit
-  -t, --time-stamp   print date of last modification, then exit
-  -v, --version      print version number, then exit
-
-Report bugs and patches to <config-patches@gnu.org>."
-
-version="\
-GNU config.guess ($timestamp)
-
-Originally written by Per Bothner.
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
-2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free
-Software Foundation, Inc.
-
-This is free software; see the source for copying conditions.  There is NO
-warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
-
-help="
-Try \`$me --help' for more information."
-
-# Parse command line
-while test $# -gt 0 ; do
-  case $1 in
-    --time-stamp | --time* | -t )
-       echo "$timestamp" ; exit ;;
-    --version | -v )
-       echo "$version" ; exit ;;
-    --help | --h* | -h )
-       echo "$usage"; exit ;;
-    -- )     # Stop option processing
-       shift; break ;;
-    - ) # Use stdin as input.
-       break ;;
-    -* )
-       echo "$me: invalid option $1$help" >&2
-       exit 1 ;;
-    * )
-       break ;;
-  esac
-done
-
-if test $# != 0; then
-  echo "$me: too many arguments$help" >&2
-  exit 1
-fi
-
-trap 'exit 1' 1 2 15
-
-# CC_FOR_BUILD -- compiler used by this script. Note that the use of a
-# compiler to aid in system detection is discouraged as it requires
-# temporary files to be created and, as you can see below, it is a
-# headache to deal with in a portable fashion.
-
-# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still
-# use `HOST_CC' if defined, but it is deprecated.
-
-# Portable tmp directory creation inspired by the Autoconf team.
-
-set_cc_for_build='
-trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ;
-trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ;
-: ${TMPDIR=/tmp} ;
- { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } ||
- { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } ||
- { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } ||
- { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ;
-dummy=$tmp/dummy ;
-tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ;
-case $CC_FOR_BUILD,$HOST_CC,$CC in
- ,,)    echo "int x;" > $dummy.c ;
-        for c in cc gcc c89 c99 ; do
-          if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then
-             CC_FOR_BUILD="$c"; break ;
-          fi ;
-        done ;
-        if test x"$CC_FOR_BUILD" = x ; then
-          CC_FOR_BUILD=no_compiler_found ;
-        fi
-        ;;
- ,,*)   CC_FOR_BUILD=$CC ;;
- ,*,*)  CC_FOR_BUILD=$HOST_CC ;;
-esac ; set_cc_for_build= ;'
-
-# This is needed to find uname on a Pyramid OSx when run in the BSD universe.
-# (ghazi@noc.rutgers.edu 1994-08-24)
-if (test -f /.attbin/uname) >/dev/null 2>&1 ; then
-        PATH=$PATH:/.attbin ; export PATH
-fi
-
-UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown
-UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown
-UNAME_SYSTEM=`(uname -s) 2>/dev/null`  || UNAME_SYSTEM=unknown
-UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
-
-# Note: order is significant - the case branches are not exclusive.
-
-case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
-    *:NetBSD:*:*)
-        # NetBSD (nbsd) targets should (where applicable) match one or
-        # more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*,
-        # *-*-netbsdecoff* and *-*-netbsd*.  For targets that recently
-        # switched to ELF, *-*-netbsd* would select the old
-        # object file format.  This provides both forward
-        # compatibility and a consistent mechanism for selecting the
-        # object file format.
-        #
-        # Note: NetBSD doesn't particularly care about the vendor
-        # portion of the name.  We always set it to "unknown".
-        sysctl="sysctl -n hw.machine_arch"
-        UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \
-            /usr/sbin/$sysctl 2>/dev/null || echo unknown)`
-        case "${UNAME_MACHINE_ARCH}" in
-            armeb) machine=armeb-unknown ;;
-            arm*) machine=arm-unknown ;;
-            sh3el) machine=shl-unknown ;;
-            sh3eb) machine=sh-unknown ;;
-            sh5el) machine=sh5le-unknown ;;
-            *) machine=${UNAME_MACHINE_ARCH}-unknown ;;
-        esac
-        # The Operating System including object format, if it has switched
-        # to ELF recently, or will in the future.
-        case "${UNAME_MACHINE_ARCH}" in
-            arm*|i386|m68k|ns32k|sh3*|sparc|vax)
-                eval $set_cc_for_build
-                if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \
-                        | grep -q __ELF__
-                then
-                    # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout).
-                    # Return netbsd for either.  FIX?
-                    os=netbsd
-                else
-                    os=netbsdelf
-                fi
-                ;;
-            *)
-                os=netbsd
-                ;;
-        esac
-        # The OS release
-        # Debian GNU/NetBSD machines have a different userland, and
-        # thus, need a distinct triplet. However, they do not need
-        # kernel version information, so it can be replaced with a
-        # suitable tag, in the style of linux-gnu.
-        case "${UNAME_VERSION}" in
-            Debian*)
-                release='-gnu'
-                ;;
-            *)
-                release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
-                ;;
-        esac
-        # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM:
-        # contains redundant information, the shorter form:
-        # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
-        echo "${machine}-${os}${release}"
-        exit ;;
-    *:OpenBSD:*:*)
-        UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'`
-        echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE}
-        exit ;;
-    *:ekkoBSD:*:*)
-        echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE}
-        exit ;;
-    *:SolidBSD:*:*)
-        echo ${UNAME_MACHINE}-unknown-solidbsd${UNAME_RELEASE}
-        exit ;;
-    macppc:MirBSD:*:*)
-        echo powerpc-unknown-mirbsd${UNAME_RELEASE}
-        exit ;;
-    *:MirBSD:*:*)
-        echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE}
-        exit ;;
-    alpha:OSF1:*:*)
-        case $UNAME_RELEASE in
-        *4.0)
-                UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
-                ;;
-        *5.*)
-                UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'`
-                ;;
-        esac
-        # According to Compaq, /usr/sbin/psrinfo has been available on
-        # OSF/1 and Tru64 systems produced since 1995.  I hope that
-        # covers most systems running today.  This code pipes the CPU
-        # types through head -n 1, so we only detect the type of CPU 0.
-        ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^  The alpha \(.*\) processor.*$/\1/p' | head -n 1`
-        case "$ALPHA_CPU_TYPE" in
-            "EV4 (21064)")
-                UNAME_MACHINE="alpha" ;;
-            "EV4.5 (21064)")
-                UNAME_MACHINE="alpha" ;;
-            "LCA4 (21066/21068)")
-                UNAME_MACHINE="alpha" ;;
-            "EV5 (21164)")
-                UNAME_MACHINE="alphaev5" ;;
-            "EV5.6 (21164A)")
-                UNAME_MACHINE="alphaev56" ;;
-            "EV5.6 (21164PC)")
-                UNAME_MACHINE="alphapca56" ;;
-            "EV5.7 (21164PC)")
-                UNAME_MACHINE="alphapca57" ;;
-            "EV6 (21264)")
-                UNAME_MACHINE="alphaev6" ;;
-            "EV6.7 (21264A)")
-                UNAME_MACHINE="alphaev67" ;;
-            "EV6.8CB (21264C)")
-                UNAME_MACHINE="alphaev68" ;;
-            "EV6.8AL (21264B)")
-                UNAME_MACHINE="alphaev68" ;;
-            "EV6.8CX (21264D)")
-                UNAME_MACHINE="alphaev68" ;;
-            "EV6.9A (21264/EV69A)")
-                UNAME_MACHINE="alphaev69" ;;
-            "EV7 (21364)")
-                UNAME_MACHINE="alphaev7" ;;
-            "EV7.9 (21364A)")
-                UNAME_MACHINE="alphaev79" ;;
-        esac
-        # A Pn.n version is a patched version.
-        # A Vn.n version is a released version.
-        # A Tn.n version is a released field test version.
-        # A Xn.n version is an unreleased experimental baselevel.
-        # 1.2 uses "1.2" for uname -r.
-        echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
-        exit ;;
-    Alpha\ *:Windows_NT*:*)
-        # How do we know it's Interix rather than the generic POSIX subsystem?
-        # Should we change UNAME_MACHINE based on the output of uname instead
-        # of the specific Alpha model?
-        echo alpha-pc-interix
-        exit ;;
-    21064:Windows_NT:50:3)
-        echo alpha-dec-winnt3.5
-        exit ;;
-    Amiga*:UNIX_System_V:4.0:*)
-        echo m68k-unknown-sysv4
-        exit ;;
-    *:[Aa]miga[Oo][Ss]:*:*)
-        echo ${UNAME_MACHINE}-unknown-amigaos
-        exit ;;
-    *:[Mm]orph[Oo][Ss]:*:*)
-        echo ${UNAME_MACHINE}-unknown-morphos
-        exit ;;
-    *:OS/390:*:*)
-        echo i370-ibm-openedition
-        exit ;;
-    *:z/VM:*:*)
-        echo s390-ibm-zvmoe
-        exit ;;
-    *:OS400:*:*)
-        echo powerpc-ibm-os400
-        exit ;;
-    arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
-        echo arm-acorn-riscix${UNAME_RELEASE}
-        exit ;;
-    arm:riscos:*:*|arm:RISCOS:*:*)
-        echo arm-unknown-riscos
-        exit ;;
-    SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*)
-        echo hppa1.1-hitachi-hiuxmpp
-        exit ;;
-    Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*)
-        # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE.
-        if test "`(/bin/universe) 2>/dev/null`" = att ; then
-                echo pyramid-pyramid-sysv3
-        else
-                echo pyramid-pyramid-bsd
-        fi
-        exit ;;
-    NILE*:*:*:dcosx)
-        echo pyramid-pyramid-svr4
-        exit ;;
-    DRS?6000:unix:4.0:6*)
-        echo sparc-icl-nx6
-        exit ;;
-    DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*)
-        case `/usr/bin/uname -p` in
-            sparc) echo sparc-icl-nx7; exit ;;
-        esac ;;
-    s390x:SunOS:*:*)
-        echo ${UNAME_MACHINE}-ibm-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
-        exit ;;
-    sun4H:SunOS:5.*:*)
-        echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
-        exit ;;
-    sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
-        echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
-        exit ;;
-    i86pc:AuroraUX:5.*:* | i86xen:AuroraUX:5.*:*)
-        echo i386-pc-auroraux${UNAME_RELEASE}
-        exit ;;
-    i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*)
-        eval $set_cc_for_build
-        SUN_ARCH="i386"
-        # If there is a compiler, see if it is configured for 64-bit objects.
-        # Note that the Sun cc does not turn __LP64__ into 1 like gcc does.
-        # This test works for both compilers.
-        if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then
-            if (echo '#ifdef __amd64'; echo IS_64BIT_ARCH; echo '#endif') | \
-                (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \
-                grep IS_64BIT_ARCH >/dev/null
-            then
-                SUN_ARCH="x86_64"
-            fi
-        fi
-        echo ${SUN_ARCH}-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
-        exit ;;
-    sun4*:SunOS:6*:*)
-        # According to config.sub, this is the proper way to canonicalize
-        # SunOS6.  Hard to guess exactly what SunOS6 will be like, but
-        # it's likely to be more like Solaris than SunOS4.
-        echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
-        exit ;;
-    sun4*:SunOS:*:*)
-        case "`/usr/bin/arch -k`" in
-            Series*|S4*)
-                UNAME_RELEASE=`uname -v`
-                ;;
-        esac
-        # Japanese Language versions have a version number like `4.1.3-JL'.
-        echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'`
-        exit ;;
-    sun3*:SunOS:*:*)
-        echo m68k-sun-sunos${UNAME_RELEASE}
-        exit ;;
-    sun*:*:4.2BSD:*)
-        UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
-        test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3
-        case "`/bin/arch`" in
-            sun3)
-                echo m68k-sun-sunos${UNAME_RELEASE}
-                ;;
-            sun4)
-                echo sparc-sun-sunos${UNAME_RELEASE}
-                ;;
-        esac
-        exit ;;
-    aushp:SunOS:*:*)
-        echo sparc-auspex-sunos${UNAME_RELEASE}
-        exit ;;
-    # The situation for MiNT is a little confusing.  The machine name
-    # can be virtually everything (everything which is not
-    # "atarist" or "atariste" at least should have a processor
-    # > m68000).  The system name ranges from "MiNT" over "FreeMiNT"
-    # to the lowercase version "mint" (or "freemint").  Finally
-    # the system name "TOS" denotes a system which is actually not
-    # MiNT.  But MiNT is downward compatible to TOS, so this should
-    # be no problem.
-    atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*)
-        echo m68k-atari-mint${UNAME_RELEASE}
-        exit ;;
-    atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*)
-        echo m68k-atari-mint${UNAME_RELEASE}
-        exit ;;
-    *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*)
-        echo m68k-atari-mint${UNAME_RELEASE}
-        exit ;;
-    milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*)
-        echo m68k-milan-mint${UNAME_RELEASE}
-        exit ;;
-    hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*)
-        echo m68k-hades-mint${UNAME_RELEASE}
-        exit ;;
-    *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*)
-        echo m68k-unknown-mint${UNAME_RELEASE}
-        exit ;;
-    m68k:machten:*:*)
-        echo m68k-apple-machten${UNAME_RELEASE}
-        exit ;;
-    powerpc:machten:*:*)
-        echo powerpc-apple-machten${UNAME_RELEASE}
-        exit ;;
-    RISC*:Mach:*:*)
-        echo mips-dec-mach_bsd4.3
-        exit ;;
-    RISC*:ULTRIX:*:*)
-        echo mips-dec-ultrix${UNAME_RELEASE}
-        exit ;;
-    VAX*:ULTRIX*:*:*)
-        echo vax-dec-ultrix${UNAME_RELEASE}
-        exit ;;
-    2020:CLIX:*:* | 2430:CLIX:*:*)
-        echo clipper-intergraph-clix${UNAME_RELEASE}
-        exit ;;
-    mips:*:*:UMIPS | mips:*:*:RISCos)
-        eval $set_cc_for_build
-        sed 's/^        //' << EOF >$dummy.c
-#ifdef __cplusplus
-#include <stdio.h>  /* for printf() prototype */
-        int main (int argc, char *argv[]) {
-#else
-        int main (argc, argv) int argc; char *argv[]; {
-#endif
-        #if defined (host_mips) && defined (MIPSEB)
-        #if defined (SYSTYPE_SYSV)
-          printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0);
-        #endif
-        #if defined (SYSTYPE_SVR4)
-          printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0);
-        #endif
-        #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD)
-          printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0);
-        #endif
-        #endif
-          exit (-1);
-        }
-EOF
-        $CC_FOR_BUILD -o $dummy $dummy.c &&
-          dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` &&
-          SYSTEM_NAME=`$dummy $dummyarg` &&
-            { echo "$SYSTEM_NAME"; exit; }
-        echo mips-mips-riscos${UNAME_RELEASE}
-        exit ;;
-    Motorola:PowerMAX_OS:*:*)
-        echo powerpc-motorola-powermax
-        exit ;;
-    Motorola:*:4.3:PL8-*)
-        echo powerpc-harris-powermax
-        exit ;;
-    Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*)
-        echo powerpc-harris-powermax
-        exit ;;
-    Night_Hawk:Power_UNIX:*:*)
-        echo powerpc-harris-powerunix
-        exit ;;
-    m88k:CX/UX:7*:*)
-        echo m88k-harris-cxux7
-        exit ;;
-    m88k:*:4*:R4*)
-        echo m88k-motorola-sysv4
-        exit ;;
-    m88k:*:3*:R3*)
-        echo m88k-motorola-sysv3
-        exit ;;
-    AViiON:dgux:*:*)
-        # DG/UX returns AViiON for all architectures
-        UNAME_PROCESSOR=`/usr/bin/uname -p`
-        if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ]
-        then
-            if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \
-               [ ${TARGET_BINARY_INTERFACE}x = x ]
-            then
-                echo m88k-dg-dgux${UNAME_RELEASE}
-            else
-                echo m88k-dg-dguxbcs${UNAME_RELEASE}
-            fi
-        else
-            echo i586-dg-dgux${UNAME_RELEASE}
-        fi
-        exit ;;
-    M88*:DolphinOS:*:*) # DolphinOS (SVR3)
-        echo m88k-dolphin-sysv3
-        exit ;;
-    M88*:*:R3*:*)
-        # Delta 88k system running SVR3
-        echo m88k-motorola-sysv3
-        exit ;;
-    XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3)
-        echo m88k-tektronix-sysv3
-        exit ;;
-    Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD)
-        echo m68k-tektronix-bsd
-        exit ;;
-    *:IRIX*:*:*)
-        echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'`
-        exit ;;
-    ????????:AIX?:[12].1:2)   # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX.
-        echo romp-ibm-aix     # uname -m gives an 8 hex-code CPU id
-        exit ;;               # Note that: echo "'`uname -s`'" gives 'AIX '
-    i*86:AIX:*:*)
-        echo i386-ibm-aix
-        exit ;;
-    ia64:AIX:*:*)
-        if [ -x /usr/bin/oslevel ] ; then
-                IBM_REV=`/usr/bin/oslevel`
-        else
-                IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
-        fi
-        echo ${UNAME_MACHINE}-ibm-aix${IBM_REV}
-        exit ;;
-    *:AIX:2:3)
-        if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
-                eval $set_cc_for_build
-                sed 's/^                //' << EOF >$dummy.c
-                #include <sys/systemcfg.h>
-
-                main()
-                        {
-                        if (!__power_pc())
-                                exit(1);
-                        puts("powerpc-ibm-aix3.2.5");
-                        exit(0);
-                        }
-EOF
-                if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy`
-                then
-                        echo "$SYSTEM_NAME"
-                else
-                        echo rs6000-ibm-aix3.2.5
-                fi
-        elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
-                echo rs6000-ibm-aix3.2.4
-        else
-                echo rs6000-ibm-aix3.2
-        fi
-        exit ;;
-    *:AIX:*:[456])
-        IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'`
-        if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then
-                IBM_ARCH=rs6000
-        else
-                IBM_ARCH=powerpc
-        fi
-        if [ -x /usr/bin/oslevel ] ; then
-                IBM_REV=`/usr/bin/oslevel`
-        else
-                IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
-        fi
-        echo ${IBM_ARCH}-ibm-aix${IBM_REV}
-        exit ;;
-    *:AIX:*:*)
-        echo rs6000-ibm-aix
-        exit ;;
-    ibmrt:4.4BSD:*|romp-ibm:BSD:*)
-        echo romp-ibm-bsd4.4
-        exit ;;
-    ibmrt:*BSD:*|romp-ibm:BSD:*)            # covers RT/PC BSD and
-        echo romp-ibm-bsd${UNAME_RELEASE}   # 4.3 with uname added to
-        exit ;;                             # report: romp-ibm BSD 4.3
-    *:BOSX:*:*)
-        echo rs6000-bull-bosx
-        exit ;;
-    DPX/2?00:B.O.S.:*:*)
-        echo m68k-bull-sysv3
-        exit ;;
-    9000/[34]??:4.3bsd:1.*:*)
-        echo m68k-hp-bsd
-        exit ;;
-    hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*)
-        echo m68k-hp-bsd4.4
-        exit ;;
-    9000/[34678]??:HP-UX:*:*)
-        HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
-        case "${UNAME_MACHINE}" in
-            9000/31? )            HP_ARCH=m68000 ;;
-            9000/[34]?? )         HP_ARCH=m68k ;;
-            9000/[678][0-9][0-9])
-                if [ -x /usr/bin/getconf ]; then
-                    sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null`
-                    sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null`
-                    case "${sc_cpu_version}" in
-                      523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0
-                      528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1
-                      532)                      # CPU_PA_RISC2_0
-                        case "${sc_kernel_bits}" in
-                          32) HP_ARCH="hppa2.0n" ;;
-                          64) HP_ARCH="hppa2.0w" ;;
-                          '') HP_ARCH="hppa2.0" ;;   # HP-UX 10.20
-                        esac ;;
-                    esac
-                fi
-                if [ "${HP_ARCH}" = "" ]; then
-                    eval $set_cc_for_build
-                    sed 's/^              //' << EOF >$dummy.c
-
-              #define _HPUX_SOURCE
-              #include <stdlib.h>
-              #include <unistd.h>
-
-              int main ()
-              {
-              #if defined(_SC_KERNEL_BITS)
-                  long bits = sysconf(_SC_KERNEL_BITS);
-              #endif
-                  long cpu  = sysconf (_SC_CPU_VERSION);
-
-                  switch (cpu)
-                {
-                case CPU_PA_RISC1_0: puts ("hppa1.0"); break;
-                case CPU_PA_RISC1_1: puts ("hppa1.1"); break;
-                case CPU_PA_RISC2_0:
-              #if defined(_SC_KERNEL_BITS)
-                    switch (bits)
-                        {
-                        case 64: puts ("hppa2.0w"); break;
-                        case 32: puts ("hppa2.0n"); break;
-                        default: puts ("hppa2.0"); break;
-                        } break;
-              #else  /* !defined(_SC_KERNEL_BITS) */
-                    puts ("hppa2.0"); break;
-              #endif
-                default: puts ("hppa1.0"); break;
-                }
-                  exit (0);
-              }
-EOF
-                    (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy`
-                    test -z "$HP_ARCH" && HP_ARCH=hppa
-                fi ;;
-        esac
-        if [ ${HP_ARCH} = "hppa2.0w" ]
-        then
-            eval $set_cc_for_build
-
-            # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating
-            # 32-bit code.  hppa64-hp-hpux* has the same kernel and a compiler
-            # generating 64-bit code.  GNU and HP use different nomenclature:
-            #
-            # $ CC_FOR_BUILD=cc ./config.guess
-            # => hppa2.0w-hp-hpux11.23
-            # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess
-            # => hppa64-hp-hpux11.23
-
-            if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) |
-                grep -q __LP64__
-            then
-                HP_ARCH="hppa2.0w"
-            else
-                HP_ARCH="hppa64"
-            fi
-        fi
-        echo ${HP_ARCH}-hp-hpux${HPUX_REV}
-        exit ;;
-    ia64:HP-UX:*:*)
-        HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
-        echo ia64-hp-hpux${HPUX_REV}
-        exit ;;
-    3050*:HI-UX:*:*)
-        eval $set_cc_for_build
-        sed 's/^        //' << EOF >$dummy.c
-        #include <unistd.h>
-        int
-        main ()
-        {
-          long cpu = sysconf (_SC_CPU_VERSION);
-          /* The order matters, because CPU_IS_HP_MC68K erroneously returns
-             true for CPU_PA_RISC1_0.  CPU_IS_PA_RISC returns correct
-             results, however.  */
-          if (CPU_IS_PA_RISC (cpu))
-            {
-              switch (cpu)
-                {
-                  case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break;
-                  case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break;
-                  case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break;
-                  default: puts ("hppa-hitachi-hiuxwe2"); break;
-                }
-            }
-          else if (CPU_IS_HP_MC68K (cpu))
-            puts ("m68k-hitachi-hiuxwe2");
-          else puts ("unknown-hitachi-hiuxwe2");
-          exit (0);
-        }
-EOF
-        $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` &&
-                { echo "$SYSTEM_NAME"; exit; }
-        echo unknown-hitachi-hiuxwe2
-        exit ;;
-    9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* )
-        echo hppa1.1-hp-bsd
-        exit ;;
-    9000/8??:4.3bsd:*:*)
-        echo hppa1.0-hp-bsd
-        exit ;;
-    *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*)
-        echo hppa1.0-hp-mpeix
-        exit ;;
-    hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* )
-        echo hppa1.1-hp-osf
-        exit ;;
-    hp8??:OSF1:*:*)
-        echo hppa1.0-hp-osf
-        exit ;;
-    i*86:OSF1:*:*)
-        if [ -x /usr/sbin/sysversion ] ; then
-            echo ${UNAME_MACHINE}-unknown-osf1mk
-        else
-            echo ${UNAME_MACHINE}-unknown-osf1
-        fi
-        exit ;;
-    parisc*:Lites*:*:*)
-        echo hppa1.1-hp-lites
-        exit ;;
-    C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
-        echo c1-convex-bsd
-        exit ;;
-    C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*)
-        if getsysinfo -f scalar_acc
-        then echo c32-convex-bsd
-        else echo c2-convex-bsd
-        fi
-        exit ;;
-    C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*)
-        echo c34-convex-bsd
-        exit ;;
-    C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*)
-        echo c38-convex-bsd
-        exit ;;
-    C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
-        echo c4-convex-bsd
-        exit ;;
-    CRAY*Y-MP:*:*:*)
-        echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
-        exit ;;
-    CRAY*[A-Z]90:*:*:*)
-        echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \
-        | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \
-              -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \
-              -e 's/\.[^.]*$/.X/'
-        exit ;;
-    CRAY*TS:*:*:*)
-        echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
-        exit ;;
-    CRAY*T3E:*:*:*)
-        echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
-        exit ;;
-    CRAY*SV1:*:*:*)
-        echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
-        exit ;;
-    *:UNICOS/mp:*:*)
-        echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
-        exit ;;
-    F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*)
-        FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
-        FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
-        FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
-        echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
-        exit ;;
-    5000:UNIX_System_V:4.*:*)
-        FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
-        FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'`
-        echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
-        exit ;;
-    i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
-        echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE}
-        exit ;;
-    sparc*:BSD/OS:*:*)
-        echo sparc-unknown-bsdi${UNAME_RELEASE}
-        exit ;;
-    *:BSD/OS:*:*)
-        echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE}
-        exit ;;
-    *:FreeBSD:*:*)
-        case ${UNAME_MACHINE} in
-            pc98)
-                echo i386-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
-            amd64)
-                echo x86_64-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
-            *)
-                echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
-        esac
-        exit ;;
-    i*:CYGWIN*:*)
-        echo ${UNAME_MACHINE}-pc-cygwin
-        exit ;;
-    *:MINGW*:*)
-        echo ${UNAME_MACHINE}-pc-mingw32
-        exit ;;
-    i*:windows32*:*)
-        # uname -m includes "-pc" on this system.
-        echo ${UNAME_MACHINE}-mingw32
-        exit ;;
-    i*:PW*:*)
-        echo ${UNAME_MACHINE}-pc-pw32
-        exit ;;
-    *:Interix*:*)
-        case ${UNAME_MACHINE} in
-            x86)
-                echo i586-pc-interix${UNAME_RELEASE}
-                exit ;;
-            authenticamd | genuineintel | EM64T)
-                echo x86_64-unknown-interix${UNAME_RELEASE}
-                exit ;;
-            IA64)
-                echo ia64-unknown-interix${UNAME_RELEASE}
-                exit ;;
-        esac ;;
-    [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*)
-        echo i${UNAME_MACHINE}-pc-mks
-        exit ;;
-    8664:Windows_NT:*)
-        echo x86_64-pc-mks
-        exit ;;
-    i*:Windows_NT*:* | Pentium*:Windows_NT*:*)
-        # How do we know it's Interix rather than the generic POSIX subsystem?
-        # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we
-        # UNAME_MACHINE based on the output of uname instead of i386?
-        echo i586-pc-interix
-        exit ;;
-    i*:UWIN*:*)
-        echo ${UNAME_MACHINE}-pc-uwin
-        exit ;;
-    amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*)
-        echo x86_64-unknown-cygwin
-        exit ;;
-    p*:CYGWIN*:*)
-        echo powerpcle-unknown-cygwin
-        exit ;;
-    prep*:SunOS:5.*:*)
-        echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
-        exit ;;
-    *:GNU:*:*)
-        # the GNU system
-        echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
-        exit ;;
-    *:GNU/*:*:*)
-        # other systems with GNU libc and userland
-        echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu
-        exit ;;
-    i*86:Minix:*:*)
-        echo ${UNAME_MACHINE}-pc-minix
-        exit ;;
-    alpha:Linux:*:*)
-        case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in
-          EV5)   UNAME_MACHINE=alphaev5 ;;
-          EV56)  UNAME_MACHINE=alphaev56 ;;
-          PCA56) UNAME_MACHINE=alphapca56 ;;
-          PCA57) UNAME_MACHINE=alphapca56 ;;
-          EV6)   UNAME_MACHINE=alphaev6 ;;
-          EV67)  UNAME_MACHINE=alphaev67 ;;
-          EV68*) UNAME_MACHINE=alphaev68 ;;
-        esac
-        objdump --private-headers /bin/sh | grep -q ld.so.1
-        if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi
-        echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC}
-        exit ;;
-    arm*:Linux:*:*)
-        eval $set_cc_for_build
-        if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \
-            | grep -q __ARM_EABI__
-        then
-            echo ${UNAME_MACHINE}-unknown-linux-gnu
-        else
-            echo ${UNAME_MACHINE}-unknown-linux-gnueabi
-        fi
-        exit ;;
-    avr32*:Linux:*:*)
-        echo ${UNAME_MACHINE}-unknown-linux-gnu
-        exit ;;
-    cris:Linux:*:*)
-        echo cris-axis-linux-gnu
-        exit ;;
-    crisv32:Linux:*:*)
-        echo crisv32-axis-linux-gnu
-        exit ;;
-    frv:Linux:*:*)
-        echo frv-unknown-linux-gnu
-        exit ;;
-    i*86:Linux:*:*)
-        LIBC=gnu
-        eval $set_cc_for_build
-        sed 's/^        //' << EOF >$dummy.c
-        #ifdef __dietlibc__
-        LIBC=dietlibc
-        #endif
-EOF
-        eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^LIBC'`
-        echo "${UNAME_MACHINE}-pc-linux-${LIBC}"
-        exit ;;
-    ia64:Linux:*:*)
-        echo ${UNAME_MACHINE}-unknown-linux-gnu
-        exit ;;
-    m32r*:Linux:*:*)
-        echo ${UNAME_MACHINE}-unknown-linux-gnu
-        exit ;;
-    m68*:Linux:*:*)
-        echo ${UNAME_MACHINE}-unknown-linux-gnu
-        exit ;;
-    mips:Linux:*:* | mips64:Linux:*:*)
-        eval $set_cc_for_build
-        sed 's/^        //' << EOF >$dummy.c
-        #undef CPU
-        #undef ${UNAME_MACHINE}
-        #undef ${UNAME_MACHINE}el
-        #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
-        CPU=${UNAME_MACHINE}el
-        #else
-        #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
-        CPU=${UNAME_MACHINE}
-        #else
-        CPU=
-        #endif
-        #endif
-EOF
-        eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^CPU'`
-        test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; }
-        ;;
-    or32:Linux:*:*)
-        echo or32-unknown-linux-gnu
-        exit ;;
-    padre:Linux:*:*)
-        echo sparc-unknown-linux-gnu
-        exit ;;
-    parisc64:Linux:*:* | hppa64:Linux:*:*)
-        echo hppa64-unknown-linux-gnu
-        exit ;;
-    parisc:Linux:*:* | hppa:Linux:*:*)
-        # Look for CPU level
-        case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in
-          PA7*) echo hppa1.1-unknown-linux-gnu ;;
-          PA8*) echo hppa2.0-unknown-linux-gnu ;;
-          *)    echo hppa-unknown-linux-gnu ;;
-        esac
-        exit ;;
-    ppc64:Linux:*:*)
-        echo powerpc64-unknown-linux-gnu
-        exit ;;
-    ppc:Linux:*:*)
-        echo powerpc-unknown-linux-gnu
-        exit ;;
-    s390:Linux:*:* | s390x:Linux:*:*)
-        echo ${UNAME_MACHINE}-ibm-linux
-        exit ;;
-    sh64*:Linux:*:*)
-        echo ${UNAME_MACHINE}-unknown-linux-gnu
-        exit ;;
-    sh*:Linux:*:*)
-        echo ${UNAME_MACHINE}-unknown-linux-gnu
-        exit ;;
-    sparc:Linux:*:* | sparc64:Linux:*:*)
-        echo ${UNAME_MACHINE}-unknown-linux-gnu
-        exit ;;
-    vax:Linux:*:*)
-        echo ${UNAME_MACHINE}-dec-linux-gnu
-        exit ;;
-    x86_64:Linux:*:*)
-        echo x86_64-unknown-linux-gnu
-        exit ;;
-    xtensa*:Linux:*:*)
-        echo ${UNAME_MACHINE}-unknown-linux-gnu
-        exit ;;
-    i*86:DYNIX/ptx:4*:*)
-        # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.
-        # earlier versions are messed up and put the nodename in both
-        # sysname and nodename.
-        echo i386-sequent-sysv4
-        exit ;;
-    i*86:UNIX_SV:4.2MP:2.*)
-        # Unixware is an offshoot of SVR4, but it has its own version
-        # number series starting with 2...
-        # I am not positive that other SVR4 systems won't match this,
-        # I just have to hope.  -- rms.
-        # Use sysv4.2uw... so that sysv4* matches it.
-        echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION}
-        exit ;;
-    i*86:OS/2:*:*)
-        # If we were able to find `uname', then EMX Unix compatibility
-        # is probably installed.
-        echo ${UNAME_MACHINE}-pc-os2-emx
-        exit ;;
-    i*86:XTS-300:*:STOP)
-        echo ${UNAME_MACHINE}-unknown-stop
-        exit ;;
-    i*86:atheos:*:*)
-        echo ${UNAME_MACHINE}-unknown-atheos
-        exit ;;
-    i*86:syllable:*:*)
-        echo ${UNAME_MACHINE}-pc-syllable
-        exit ;;
-    i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.[02]*:*)
-        echo i386-unknown-lynxos${UNAME_RELEASE}
-        exit ;;
-    i*86:*DOS:*:*)
-        echo ${UNAME_MACHINE}-pc-msdosdjgpp
-        exit ;;
-    i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*)
-        UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'`
-        if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
-                echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL}
-        else
-                echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL}
-        fi
-        exit ;;
-    i*86:*:5:[678]*)
-        # UnixWare 7.x, OpenUNIX and OpenServer 6.
-        case `/bin/uname -X | grep "^Machine"` in
-            *486*)           UNAME_MACHINE=i486 ;;
-            *Pentium)        UNAME_MACHINE=i586 ;;
-            *Pent*|*Celeron) UNAME_MACHINE=i686 ;;
-        esac
-        echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION}
-        exit ;;
-    i*86:*:3.2:*)
-        if test -f /usr/options/cb.name; then
-                UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name`
-                echo ${UNAME_MACHINE}-pc-isc$UNAME_REL
-        elif /bin/uname -X 2>/dev/null >/dev/null ; then
-                UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')`
-                (/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486
-                (/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \
-                        && UNAME_MACHINE=i586
-                (/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \
-                        && UNAME_MACHINE=i686
-                (/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \
-                        && UNAME_MACHINE=i686
-                echo ${UNAME_MACHINE}-pc-sco$UNAME_REL
-        else
-                echo ${UNAME_MACHINE}-pc-sysv32
-        fi
-        exit ;;
-    pc:*:*:*)
-        # Left here for compatibility:
-        # uname -m prints for DJGPP always 'pc', but it prints nothing about
-        # the processor, so we play safe by assuming i586.
-        # Note: whatever this is, it MUST be the same as what config.sub
-        # prints for the "djgpp" host, or else GDB configury will decide that
-        # this is a cross-build.
-        echo i586-pc-msdosdjgpp
-        exit ;;
-    Intel:Mach:3*:*)
-        echo i386-pc-mach3
-        exit ;;
-    paragon:*:*:*)
-        echo i860-intel-osf1
-        exit ;;
-    i860:*:4.*:*) # i860-SVR4
-        if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then
-          echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4
-        else # Add other i860-SVR4 vendors below as they are discovered.
-          echo i860-unknown-sysv${UNAME_RELEASE}  # Unknown i860-SVR4
-        fi
-        exit ;;
-    mini*:CTIX:SYS*5:*)
-        # "miniframe"
-        echo m68010-convergent-sysv
-        exit ;;
-    mc68k:UNIX:SYSTEM5:3.51m)
-        echo m68k-convergent-sysv
-        exit ;;
-    M680?0:D-NIX:5.3:*)
-        echo m68k-diab-dnix
-        exit ;;
-    M68*:*:R3V[5678]*:*)
-        test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;;
-    3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0)
-        OS_REL=''
-        test -r /etc/.relid \
-        && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
-        /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
-          && { echo i486-ncr-sysv4.3${OS_REL}; exit; }
-        /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
-          && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;;
-    3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
-        /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
-          && { echo i486-ncr-sysv4; exit; } ;;
-    NCR*:*:4.2:* | MPRAS*:*:4.2:*)
-        OS_REL='.3'
-        test -r /etc/.relid \
-            && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
-        /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
-            && { echo i486-ncr-sysv4.3${OS_REL}; exit; }
-        /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
-            && { echo i586-ncr-sysv4.3${OS_REL}; exit; }
-        /bin/uname -p 2>/dev/null | /bin/grep pteron >/dev/null \
-            && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;;
-    m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*)
-        echo m68k-unknown-lynxos${UNAME_RELEASE}
-        exit ;;
-    mc68030:UNIX_System_V:4.*:*)
-        echo m68k-atari-sysv4
-        exit ;;
-    TSUNAMI:LynxOS:2.*:*)
-        echo sparc-unknown-lynxos${UNAME_RELEASE}
-        exit ;;
-    rs6000:LynxOS:2.*:*)
-        echo rs6000-unknown-lynxos${UNAME_RELEASE}
-        exit ;;
-    PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.[02]*:*)
-        echo powerpc-unknown-lynxos${UNAME_RELEASE}
-        exit ;;
-    SM[BE]S:UNIX_SV:*:*)
-        echo mips-dde-sysv${UNAME_RELEASE}
-        exit ;;
-    RM*:ReliantUNIX-*:*:*)
-        echo mips-sni-sysv4
-        exit ;;
-    RM*:SINIX-*:*:*)
-        echo mips-sni-sysv4
-        exit ;;
-    *:SINIX-*:*:*)
-        if uname -p 2>/dev/null >/dev/null ; then
-                UNAME_MACHINE=`(uname -p) 2>/dev/null`
-                echo ${UNAME_MACHINE}-sni-sysv4
-        else
-                echo ns32k-sni-sysv
-        fi
-        exit ;;
-    PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort
-                      # says <Richard.M.Bartel@ccMail.Census.GOV>
-        echo i586-unisys-sysv4
-        exit ;;
-    *:UNIX_System_V:4*:FTX*)
-        # From Gerald Hewes <hewes@openmarket.com>.
-        # How about differentiating between stratus architectures? -djm
-        echo hppa1.1-stratus-sysv4
-        exit ;;
-    *:*:*:FTX*)
-        # From seanf@swdc.stratus.com.
-        echo i860-stratus-sysv4
-        exit ;;
-    i*86:VOS:*:*)
-        # From Paul.Green@stratus.com.
-        echo ${UNAME_MACHINE}-stratus-vos
-        exit ;;
-    *:VOS:*:*)
-        # From Paul.Green@stratus.com.
-        echo hppa1.1-stratus-vos
-        exit ;;
-    mc68*:A/UX:*:*)
-        echo m68k-apple-aux${UNAME_RELEASE}
-        exit ;;
-    news*:NEWS-OS:6*:*)
-        echo mips-sony-newsos6
-        exit ;;
-    R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*)
-        if [ -d /usr/nec ]; then
-                echo mips-nec-sysv${UNAME_RELEASE}
-        else
-                echo mips-unknown-sysv${UNAME_RELEASE}
-        fi
-        exit ;;
-    BeBox:BeOS:*:*)     # BeOS running on hardware made by Be, PPC only.
-        echo powerpc-be-beos
-        exit ;;
-    BeMac:BeOS:*:*)     # BeOS running on Mac or Mac clone, PPC only.
-        echo powerpc-apple-beos
-        exit ;;
-    BePC:BeOS:*:*)      # BeOS running on Intel PC compatible.
-        echo i586-pc-beos
-        exit ;;
-    BePC:Haiku:*:*)     # Haiku running on Intel PC compatible.
-        echo i586-pc-haiku
-        exit ;;
-    SX-4:SUPER-UX:*:*)
-        echo sx4-nec-superux${UNAME_RELEASE}
-        exit ;;
-    SX-5:SUPER-UX:*:*)
-        echo sx5-nec-superux${UNAME_RELEASE}
-        exit ;;
-    SX-6:SUPER-UX:*:*)
-        echo sx6-nec-superux${UNAME_RELEASE}
-        exit ;;
-    SX-7:SUPER-UX:*:*)
-        echo sx7-nec-superux${UNAME_RELEASE}
-        exit ;;
-    SX-8:SUPER-UX:*:*)
-        echo sx8-nec-superux${UNAME_RELEASE}
-        exit ;;
-    SX-8R:SUPER-UX:*:*)
-        echo sx8r-nec-superux${UNAME_RELEASE}
-        exit ;;
-    Power*:Rhapsody:*:*)
-        echo powerpc-apple-rhapsody${UNAME_RELEASE}
-        exit ;;
-    *:Rhapsody:*:*)
-        echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE}
-        exit ;;
-    *:Darwin:*:*)
-        UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown
-        case $UNAME_PROCESSOR in
-            i386)
-                eval $set_cc_for_build
-                if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then
-                  if (echo '#ifdef __LP64__'; echo IS_64BIT_ARCH; echo '#endif') | \
-                      (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \
-                      grep IS_64BIT_ARCH >/dev/null
-                  then
-                      UNAME_PROCESSOR="x86_64"
-                  fi
-                fi ;;
-            unknown) UNAME_PROCESSOR=powerpc ;;
-        esac
-        echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE}
-        exit ;;
-    *:procnto*:*:* | *:QNX:[0123456789]*:*)
-        UNAME_PROCESSOR=`uname -p`
-        if test "$UNAME_PROCESSOR" = "x86"; then
-                UNAME_PROCESSOR=i386
-                UNAME_MACHINE=pc
-        fi
-        echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE}
-        exit ;;
-    *:QNX:*:4*)
-        echo i386-pc-qnx
-        exit ;;
-    NSE-?:NONSTOP_KERNEL:*:*)
-        echo nse-tandem-nsk${UNAME_RELEASE}
-        exit ;;
-    NSR-?:NONSTOP_KERNEL:*:*)
-        echo nsr-tandem-nsk${UNAME_RELEASE}
-        exit ;;
-    *:NonStop-UX:*:*)
-        echo mips-compaq-nonstopux
-        exit ;;
-    BS2000:POSIX*:*:*)
-        echo bs2000-siemens-sysv
-        exit ;;
-    DS/*:UNIX_System_V:*:*)
-        echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE}
-        exit ;;
-    *:Plan9:*:*)
-        # "uname -m" is not consistent, so use $cputype instead. 386
-        # is converted to i386 for consistency with other x86
-        # operating systems.
-        if test "$cputype" = "386"; then
-            UNAME_MACHINE=i386
-        else
-            UNAME_MACHINE="$cputype"
-        fi
-        echo ${UNAME_MACHINE}-unknown-plan9
-        exit ;;
-    *:TOPS-10:*:*)
-        echo pdp10-unknown-tops10
-        exit ;;
-    *:TENEX:*:*)
-        echo pdp10-unknown-tenex
-        exit ;;
-    KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*)
-        echo pdp10-dec-tops20
-        exit ;;
-    XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*)
-        echo pdp10-xkl-tops20
-        exit ;;
-    *:TOPS-20:*:*)
-        echo pdp10-unknown-tops20
-        exit ;;
-    *:ITS:*:*)
-        echo pdp10-unknown-its
-        exit ;;
-    SEI:*:*:SEIUX)
-        echo mips-sei-seiux${UNAME_RELEASE}
-        exit ;;
-    *:DragonFly:*:*)
-        echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
-        exit ;;
-    *:*VMS:*:*)
-        UNAME_MACHINE=`(uname -p) 2>/dev/null`
-        case "${UNAME_MACHINE}" in
-            A*) echo alpha-dec-vms ; exit ;;
-            I*) echo ia64-dec-vms ; exit ;;
-            V*) echo vax-dec-vms ; exit ;;
-        esac ;;
-    *:XENIX:*:SysV)
-        echo i386-pc-xenix
-        exit ;;
-    i*86:skyos:*:*)
-        echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//'
-        exit ;;
-    i*86:rdos:*:*)
-        echo ${UNAME_MACHINE}-pc-rdos
-        exit ;;
-    i*86:AROS:*:*)
-        echo ${UNAME_MACHINE}-pc-aros
-        exit ;;
-esac
-
-#echo '(No uname command or uname output not recognized.)' 1>&2
-#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2
-
-eval $set_cc_for_build
-cat >$dummy.c <<EOF
-#ifdef _SEQUENT_
-# include <sys/types.h>
-# include <sys/utsname.h>
-#endif
-main ()
-{
-#if defined (sony)
-#if defined (MIPSEB)
-  /* BFD wants "bsd" instead of "newsos".  Perhaps BFD should be changed,
-     I don't know....  */
-  printf ("mips-sony-bsd\n"); exit (0);
-#else
-#include <sys/param.h>
-  printf ("m68k-sony-newsos%s\n",
-#ifdef NEWSOS4
-          "4"
-#else
-          ""
-#endif
-         ); exit (0);
-#endif
-#endif
-
-#if defined (__arm) && defined (__acorn) && defined (__unix)
-  printf ("arm-acorn-riscix\n"); exit (0);
-#endif
-
-#if defined (hp300) && !defined (hpux)
-  printf ("m68k-hp-bsd\n"); exit (0);
-#endif
-
-#if defined (NeXT)
-#if !defined (__ARCHITECTURE__)
-#define __ARCHITECTURE__ "m68k"
-#endif
-  int version;
-  version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`;
-  if (version < 4)
-    printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version);
-  else
-    printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version);
-  exit (0);
-#endif
-
-#if defined (MULTIMAX) || defined (n16)
-#if defined (UMAXV)
-  printf ("ns32k-encore-sysv\n"); exit (0);
-#else
-#if defined (CMU)
-  printf ("ns32k-encore-mach\n"); exit (0);
-#else
-  printf ("ns32k-encore-bsd\n"); exit (0);
-#endif
-#endif
-#endif
-
-#if defined (__386BSD__)
-  printf ("i386-pc-bsd\n"); exit (0);
-#endif
-
-#if defined (sequent)
-#if defined (i386)
-  printf ("i386-sequent-dynix\n"); exit (0);
-#endif
-#if defined (ns32000)
-  printf ("ns32k-sequent-dynix\n"); exit (0);
-#endif
-#endif
-
-#if defined (_SEQUENT_)
-    struct utsname un;
-
-    uname(&un);
-
-    if (strncmp(un.version, "V2", 2) == 0) {
-        printf ("i386-sequent-ptx2\n"); exit (0);
-    }
-    if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */
-        printf ("i386-sequent-ptx1\n"); exit (0);
-    }
-    printf ("i386-sequent-ptx\n"); exit (0);
-
-#endif
-
-#if defined (vax)
-# if !defined (ultrix)
-#  include <sys/param.h>
-#  if defined (BSD)
-#   if BSD == 43
-      printf ("vax-dec-bsd4.3\n"); exit (0);
-#   else
-#    if BSD == 199006
-      printf ("vax-dec-bsd4.3reno\n"); exit (0);
-#    else
-      printf ("vax-dec-bsd\n"); exit (0);
-#    endif
-#   endif
-#  else
-    printf ("vax-dec-bsd\n"); exit (0);
-#  endif
-# else
-    printf ("vax-dec-ultrix\n"); exit (0);
-# endif
-#endif
-
-#if defined (alliant) && defined (i860)
-  printf ("i860-alliant-bsd\n"); exit (0);
-#endif
-
-  exit (1);
-}
-EOF
-
-$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && SYSTEM_NAME=`$dummy` &&
-        { echo "$SYSTEM_NAME"; exit; }
-
-# Apollos put the system type in the environment.
-
-test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit; }
-
-# Convex versions that predate uname can use getsysinfo(1)
-
-if [ -x /usr/convex/getsysinfo ]
-then
-    case `getsysinfo -f cpu_type` in
-    c1*)
-        echo c1-convex-bsd
-        exit ;;
-    c2*)
-        if getsysinfo -f scalar_acc
-        then echo c32-convex-bsd
-        else echo c2-convex-bsd
-        fi
-        exit ;;
-    c34*)
-        echo c34-convex-bsd
-        exit ;;
-    c38*)
-        echo c38-convex-bsd
-        exit ;;
-    c4*)
-        echo c4-convex-bsd
-        exit ;;
-    esac
-fi
-
-cat >&2 <<EOF
-$0: unable to guess system type
-
-This script, last modified $timestamp, has failed to recognize
-the operating system you are using. It is advised that you
-download the most up to date version of the config scripts from
-
-  http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD
-and
-  http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD
-
-If the version you run ($0) is already up to date, please
-send the following data and any information you think might be
-pertinent to <config-patches@gnu.org> in order to provide the needed
-information to handle your system.
-
-config.guess timestamp = $timestamp
-
-uname -m = `(uname -m) 2>/dev/null || echo unknown`
-uname -r = `(uname -r) 2>/dev/null || echo unknown`
-uname -s = `(uname -s) 2>/dev/null || echo unknown`
-uname -v = `(uname -v) 2>/dev/null || echo unknown`
-
-/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null`
-/bin/uname -X     = `(/bin/uname -X) 2>/dev/null`
-
-hostinfo               = `(hostinfo) 2>/dev/null`
-/bin/universe          = `(/bin/universe) 2>/dev/null`
-/usr/bin/arch -k       = `(/usr/bin/arch -k) 2>/dev/null`
-/bin/arch              = `(/bin/arch) 2>/dev/null`
-/usr/bin/oslevel       = `(/usr/bin/oslevel) 2>/dev/null`
-/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null`
-
-UNAME_MACHINE = ${UNAME_MACHINE}
-UNAME_RELEASE = ${UNAME_RELEASE}
-UNAME_SYSTEM  = ${UNAME_SYSTEM}
-UNAME_VERSION = ${UNAME_VERSION}
-EOF
-
-exit 1
-
-# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "timestamp='"
-# time-stamp-format: "%:y-%02m-%02d"
-# time-stamp-end: "'"
-# End:
diff --git a/libraries/eet/config.h.in b/libraries/eet/config.h.in
deleted file mode 100644
index 76da120..0000000
--- a/libraries/eet/config.h.in
+++ /dev/null
@@ -1,172 +0,0 @@
-/* config.h.in.  Generated from configure.ac by autoheader.  */
-
-
-#ifndef EFL_CONFIG_H__
-#define EFL_CONFIG_H__
-
-
-/* Define to one of `_getb67', `GETB67', `getb67' for Cray-2 and Cray-YMP
-   systems. This function is required for `alloca.c' support on those systems.
-   */
-#undef CRAY_STACKSEG_END
-
-/* Define to 1 if using `alloca.c'. */
-#undef C_ALLOCA
-
-/* support old eet file format */
-#undef EET_OLD_EET_FILE_FORMAT
-
-/* use gnutls_x509_crt_verify_hash */
-#undef EET_USE_NEW_GNUTLS_API
-
-/* use gnutls_privkey_sign_data */
-#undef EET_USE_NEW_PRIVKEY_SIGN_DATA
-
-/* use gnutls_pubkey_verify_hash */
-#undef EET_USE_NEW_PUBKEY_VERIFY_HASH
-
-/* Define to 1 if you have `alloca', as a function or macro. */
-#undef HAVE_ALLOCA
-
-/* Define to 1 if you have <alloca.h> and it should be used (not on Ultrix).
-   */
-#undef HAVE_ALLOCA_H
-
-/* Have cipher support built in eet */
-#undef HAVE_CIPHER
-
-/* Define to 1 if you have the <dlfcn.h> header file. */
-#undef HAVE_DLFCN_H
-
-/* Set to 1 if Evil library is installed */
-#undef HAVE_EVIL
-
-/* Define to 1 if you have Exotic. */
-#undef HAVE_EXOTIC_H
-
-/* Define to 1 if you have the `fmemopen' function. */
-#undef HAVE_FMEMOPEN
-
-/* Have Gnutls support */
-#undef HAVE_GNUTLS
-
-/* Define to 1 if you have the <inttypes.h> header file. */
-#undef HAVE_INTTYPES_H
-
-/* Define to 1 if you have the <memory.h> header file. */
-#undef HAVE_MEMORY_H
-
-/* Define to 1 if you have the <netinet/in.h> header file. */
-#undef HAVE_NETINET_IN_H
-
-/* Have Openssl support */
-#undef HAVE_OPENSSL
-
-/* Define to 1 if you have the `open_memstream' function. */
-#undef HAVE_OPEN_MEMSTREAM
-
-/* Define to 1 if you have the `realpath' function. */
-#undef HAVE_REALPATH
-
-/* Have signature support for eet file */
-#undef HAVE_SIGNATURE
-
-/* Define to 1 if you have the <stdint.h> header file. */
-#undef HAVE_STDINT_H
-
-/* Define to 1 if you have the <stdlib.h> header file. */
-#undef HAVE_STDLIB_H
-
-/* Define to 1 if you have the <strings.h> header file. */
-#undef HAVE_STRINGS_H
-
-/* Define to 1 if you have the <string.h> header file. */
-#undef HAVE_STRING_H
-
-/* Define to 1 if you have the <sys/stat.h> header file. */
-#undef HAVE_SYS_STAT_H
-
-/* Define to 1 if you have the <sys/types.h> header file. */
-#undef HAVE_SYS_TYPES_H
-
-/* Define to 1 if you have the <unistd.h> header file. */
-#undef HAVE_UNISTD_H
-
-/* Define to 1 if your compiler has __attribute__ */
-#undef HAVE___ATTRIBUTE__
-
-/* Define to the sub-directory in which libtool stores uninstalled libraries.
-   */
-#undef LT_OBJDIR
-
-/* Define to 1 if your C compiler doesn't accept -c and -o together. */
-#undef NO_MINUS_C_MINUS_O
-
-/* Name of package */
-#undef PACKAGE
-
-/* Define to the address where bug reports for this package should be sent. */
-#undef PACKAGE_BUGREPORT
-
-/* Define to the full name of this package. */
-#undef PACKAGE_NAME
-
-/* Define to the full name and version of this package. */
-#undef PACKAGE_STRING
-
-/* Define to the one symbol short name of this package. */
-#undef PACKAGE_TARNAME
-
-/* Define to the home page for this package. */
-#undef PACKAGE_URL
-
-/* Define to the version of this package. */
-#undef PACKAGE_VERSION
-
-/* default value since PATH_MAX is not defined */
-#undef PATH_MAX
-
-/* If using the C implementation of alloca, define if you know the
-   direction of stack growth for your system; otherwise it will be
-   automatically deduced at runtime.
-        STACK_DIRECTION > 0 => grows toward higher addresses
-        STACK_DIRECTION < 0 => grows toward lower addresses
-        STACK_DIRECTION = 0 => direction of growth unknown */
-#undef STACK_DIRECTION
-
-/* Define to 1 if you have the ANSI C header files. */
-#undef STDC_HEADERS
-
-/* Version number of package */
-#undef VERSION
-
-/* Major version */
-#undef VMAJ
-
-/* Micro version */
-#undef VMIC
-
-/* Minor version */
-#undef VMIN
-
-/* Revison */
-#undef VREV
-
-/* Enable GNU extensions */
-#undef _GNU_SOURCE
-
-/* Macro declaring a function argument to be unused */
-#undef __UNUSED__
-
-/* Define to empty if `const' does not conform to ANSI C. */
-#undef const
-
-/* Define to `__inline__' or `__inline' if that's what the C compiler
-   calls it, or to nothing if 'inline' is not supported under any name.  */
-#ifndef __cplusplus
-#undef inline
-#endif
-
-
-#endif /* EFL_CONFIG_H__ */
-
diff --git a/libraries/eet/config.sub b/libraries/eet/config.sub
deleted file mode 100755
index c2d1257..0000000
--- a/libraries/eet/config.sub
+++ /dev/null
@@ -1,1714 +0,0 @@
-#! /bin/sh
-# Configuration validation subroutine script.
-#   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-#   2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
-#   Free Software Foundation, Inc.
-
-timestamp='2010-01-22'
-
-# This file is (in principle) common to ALL GNU software.
-# The presence of a machine in this file suggests that SOME GNU software
-# can handle that machine.  It does not imply ALL GNU software can.
-#
-# This file is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA
-# 02110-1301, USA.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-
-# Please send patches to <config-patches@gnu.org>.  Submit a context
-# diff and a properly formatted GNU ChangeLog entry.
-#
-# Configuration subroutine to validate and canonicalize a configuration type.
-# Supply the specified configuration type as an argument.
-# If it is invalid, we print an error message on stderr and exit with code 1.
-# Otherwise, we print the canonical config type on stdout and succeed.
-
-# You can get the latest version of this script from:
-# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD
-
-# This file is supposed to be the same for all GNU packages
-# and recognize all the CPU types, system types and aliases
-# that are meaningful with *any* GNU software.
-# Each package is responsible for reporting which valid configurations
-# it does not support.  The user should be able to distinguish
-# a failure to support a valid configuration from a meaningless
-# configuration.
-
-# The goal of this file is to map all the various variations of a given
-# machine specification into a single specification in the form:
-#       CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
-# or in some cases, the newer four-part form:
-#       CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
-# It is wrong to echo any other type of specification.
-
-me=`echo "$0" | sed -e 's,.*/,,'`
-
-usage="\
-Usage: $0 [OPTION] CPU-MFR-OPSYS
-       $0 [OPTION] ALIAS
-
-Canonicalize a configuration name.
-
-Operation modes:
-  -h, --help         print this help, then exit
-  -t, --time-stamp   print date of last modification, then exit
-  -v, --version      print version number, then exit
-
-Report bugs and patches to <config-patches@gnu.org>."
-
-version="\
-GNU config.sub ($timestamp)
-
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
-2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free
-Software Foundation, Inc.
-
-This is free software; see the source for copying conditions.  There is NO
-warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
-
-help="
-Try \`$me --help' for more information."
-
-# Parse command line
-while test $# -gt 0 ; do
-  case $1 in
-    --time-stamp | --time* | -t )
-       echo "$timestamp" ; exit ;;
-    --version | -v )
-       echo "$version" ; exit ;;
-    --help | --h* | -h )
-       echo "$usage"; exit ;;
-    -- )     # Stop option processing
-       shift; break ;;
-    - ) # Use stdin as input.
-       break ;;
-    -* )
-       echo "$me: invalid option $1$help"
-       exit 1 ;;
-
-    *local*)
-       # First pass through any local machine types.
-       echo $1
-       exit ;;
-
-    * )
-       break ;;
-  esac
-done
-
-case $# in
- 0) echo "$me: missing argument$help" >&2
-    exit 1;;
- 1) ;;
- *) echo "$me: too many arguments$help" >&2
-    exit 1;;
-esac
-
-# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any).
-# Here we must recognize all the valid KERNEL-OS combinations.
-maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
-case $maybe_os in
-  nto-qnx* | linux-gnu* | linux-dietlibc | linux-newlib* | linux-uclibc* | \
-  uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | knetbsd*-gnu* | netbsd*-gnu* | \
-  kopensolaris*-gnu* | \
-  storm-chaos* | os2-emx* | rtmk-nova*)
-    os=-$maybe_os
-    basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
-    ;;
-  *)
-    basic_machine=`echo $1 | sed 's/-[^-]*$//'`
-    if [ $basic_machine != $1 ]
-    then os=`echo $1 | sed 's/.*-/-/'`
-    else os=; fi
-    ;;
-esac
-
-### Let's recognize common machines as not being operating systems so
-### that things like config.sub decstation-3100 work.  We also
-### recognize some manufacturers as not being operating systems, so we
-### can provide default operating systems below.
-case $os in
-        -sun*os*)
-                # Prevent following clause from handling this invalid input.
-                ;;
-        -dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \
-        -att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \
-        -unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \
-        -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\
-        -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \
-        -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \
-        -apple | -axis | -knuth | -cray | -microblaze)
-                os=
-                basic_machine=$1
-                ;;
-        -bluegene*)
-                os=-cnk
-                ;;
-        -sim | -cisco | -oki | -wec | -winbond)
-                os=
-                basic_machine=$1
-                ;;
-        -scout)
-                ;;
-        -wrs)
-                os=-vxworks
-                basic_machine=$1
-                ;;
-        -chorusos*)
-                os=-chorusos
-                basic_machine=$1
-                ;;
-        -chorusrdb)
-                os=-chorusrdb
-                basic_machine=$1
-                ;;
-        -hiux*)
-                os=-hiuxwe2
-                ;;
-        -sco6)
-                os=-sco5v6
-                basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-                ;;
-        -sco5)
-                os=-sco3.2v5
-                basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-                ;;
-        -sco4)
-                os=-sco3.2v4
-                basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-                ;;
-        -sco3.2.[4-9]*)
-                os=`echo $os | sed -e 's/sco3.2./sco3.2v/'`
-                basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-                ;;
-        -sco3.2v[4-9]*)
-                # Don't forget version if it is 3.2v4 or newer.
-                basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-                ;;
-        -sco5v6*)
-                # Don't forget version if it is 3.2v4 or newer.
-                basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-                ;;
-        -sco*)
-                os=-sco3.2v2
-                basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-                ;;
-        -udk*)
-                basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-                ;;
-        -isc)
-                os=-isc2.2
-                basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-                ;;
-        -clix*)
-                basic_machine=clipper-intergraph
-                ;;
-        -isc*)
-                basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-                ;;
-        -lynx*)
-                os=-lynxos
-                ;;
-        -ptx*)
-                basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'`
-                ;;
-        -windowsnt*)
-                os=`echo $os | sed -e 's/windowsnt/winnt/'`
-                ;;
-        -psos*)
-                os=-psos
-                ;;
-        -mint | -mint[0-9]*)
-                basic_machine=m68k-atari
-                os=-mint
-                ;;
-esac
-
-# Decode aliases for certain CPU-COMPANY combinations.
-case $basic_machine in
-        # Recognize the basic CPU types without company name.
-        # Some are omitted here because they have special meanings below.
-        1750a | 580 \
-        | a29k \
-        | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \
-        | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \
-        | am33_2.0 \
-        | arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr | avr32 \
-        | bfin \
-        | c4x | clipper \
-        | d10v | d30v | dlx | dsp16xx \
-        | fido | fr30 | frv \
-        | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
-        | i370 | i860 | i960 | ia64 \
-        | ip2k | iq2000 \
-        | lm32 \
-        | m32c | m32r | m32rle | m68000 | m68k | m88k \
-        | maxq | mb | microblaze | mcore | mep | metag \
-        | mips | mipsbe | mipseb | mipsel | mipsle \
-        | mips16 \
-        | mips64 | mips64el \
-        | mips64octeon | mips64octeonel \
-        | mips64orion | mips64orionel \
-        | mips64r5900 | mips64r5900el \
-        | mips64vr | mips64vrel \
-        | mips64vr4100 | mips64vr4100el \
-        | mips64vr4300 | mips64vr4300el \
-        | mips64vr5000 | mips64vr5000el \
-        | mips64vr5900 | mips64vr5900el \
-        | mipsisa32 | mipsisa32el \
-        | mipsisa32r2 | mipsisa32r2el \
-        | mipsisa64 | mipsisa64el \
-        | mipsisa64r2 | mipsisa64r2el \
-        | mipsisa64sb1 | mipsisa64sb1el \
-        | mipsisa64sr71k | mipsisa64sr71kel \
-        | mipstx39 | mipstx39el \
-        | mn10200 | mn10300 \
-        | moxie \
-        | mt \
-        | msp430 \
-        | nios | nios2 \
-        | ns16k | ns32k \
-        | or32 \
-        | pdp10 | pdp11 | pj | pjl \
-        | powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \
-        | pyramid \
-        | rx \
-        | score \
-        | sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \
-        | sh64 | sh64le \
-        | sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \
-        | sparcv8 | sparcv9 | sparcv9b | sparcv9v \
-        | spu | strongarm \
-        | tahoe | thumb | tic4x | tic80 | tron \
-        | ubicom32 \
-        | v850 | v850e \
-        | we32k \
-        | x86 | xc16x | xscale | xscalee[bl] | xstormy16 | xtensa \
-        | z8k | z80)
-                basic_machine=$basic_machine-unknown
-                ;;
-        m6811 | m68hc11 | m6812 | m68hc12 | picochip)
-                # Motorola 68HC11/12.
-                basic_machine=$basic_machine-unknown
-                os=-none
-                ;;
-        m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k)
-                ;;
-        ms1)
-                basic_machine=mt-unknown
-                ;;
-
-        # We use `pc' rather than `unknown'
-        # because (1) that's what they normally are, and
-        # (2) the word "unknown" tends to confuse beginning users.
-        i*86 | x86_64)
-          basic_machine=$basic_machine-pc
-          ;;
-        # Object if more than one company name word.
-        *-*-*)
-                echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
-                exit 1
-                ;;
-        # Recognize the basic CPU types with company name.
-        580-* \
-        | a29k-* \
-        | alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \
-        | alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \
-        | alphapca5[67]-* | alpha64pca5[67]-* | arc-* \
-        | arm-*  | armbe-* | armle-* | armeb-* | armv*-* \
-        | avr-* | avr32-* \
-        | bfin-* | bs2000-* \
-        | c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* | c55x-* | c6x-* \
-        | clipper-* | craynv-* | cydra-* \
-        | d10v-* | d30v-* | dlx-* \
-        | elxsi-* \
-        | f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \
-        | h8300-* | h8500-* \
-        | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \
-        | i*86-* | i860-* | i960-* | ia64-* \
-        | ip2k-* | iq2000-* \
-        | lm32-* \
-        | m32c-* | m32r-* | m32rle-* \
-        | m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \
-        | m88110-* | m88k-* | maxq-* | mcore-* | metag-* | microblaze-* \
-        | mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \
-        | mips16-* \
-        | mips64-* | mips64el-* \
-        | mips64octeon-* | mips64octeonel-* \
-        | mips64orion-* | mips64orionel-* \
-        | mips64r5900-* | mips64r5900el-* \
-        | mips64vr-* | mips64vrel-* \
-        | mips64vr4100-* | mips64vr4100el-* \
-        | mips64vr4300-* | mips64vr4300el-* \
-        | mips64vr5000-* | mips64vr5000el-* \
-        | mips64vr5900-* | mips64vr5900el-* \
-        | mipsisa32-* | mipsisa32el-* \
-        | mipsisa32r2-* | mipsisa32r2el-* \
-        | mipsisa64-* | mipsisa64el-* \
-        | mipsisa64r2-* | mipsisa64r2el-* \
-        | mipsisa64sb1-* | mipsisa64sb1el-* \
-        | mipsisa64sr71k-* | mipsisa64sr71kel-* \
-        | mipstx39-* | mipstx39el-* \
-        | mmix-* \
-        | mt-* \
-        | msp430-* \
-        | nios-* | nios2-* \
-        | none-* | np1-* | ns16k-* | ns32k-* \
-        | orion-* \
-        | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \
-        | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \
-        | pyramid-* \
-        | romp-* | rs6000-* | rx-* \
-        | sh-* | sh[1234]-* | sh[24]a-* | sh[24]aeb-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \
-        | shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
-        | sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \
-        | sparclite-* \
-        | sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | strongarm-* | sv1-* | sx?-* \
-        | tahoe-* | thumb-* \
-        | tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \
-        | tile-* | tilegx-* \
-        | tron-* \
-        | ubicom32-* \
-        | v850-* | v850e-* | vax-* \
-        | we32k-* \
-        | x86-* | x86_64-* | xc16x-* | xps100-* | xscale-* | xscalee[bl]-* \
-        | xstormy16-* | xtensa*-* \
-        | ymp-* \
-        | z8k-* | z80-*)
-                ;;
-        # Recognize the basic CPU types without company name, with glob match.
-        xtensa*)
-                basic_machine=$basic_machine-unknown
-                ;;
-        # Recognize the various machine names and aliases which stand
-        # for a CPU type and a company and sometimes even an OS.
-        386bsd)
-                basic_machine=i386-unknown
-                os=-bsd
-                ;;
-        3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc)
-                basic_machine=m68000-att
-                ;;
-        3b*)
-                basic_machine=we32k-att
-                ;;
-        a29khif)
-                basic_machine=a29k-amd
-                os=-udi
-                ;;
-        abacus)
-                basic_machine=abacus-unknown
-                ;;
-        adobe68k)
-                basic_machine=m68010-adobe
-                os=-scout
-                ;;
-        alliant | fx80)
-                basic_machine=fx80-alliant
-                ;;
-        altos | altos3068)
-                basic_machine=m68k-altos
-                ;;
-        am29k)
-                basic_machine=a29k-none
-                os=-bsd
-                ;;
-        amd64)
-                basic_machine=x86_64-pc
-                ;;
-        amd64-*)
-                basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'`
-                ;;
-        amdahl)
-                basic_machine=580-amdahl
-                os=-sysv
-                ;;
-        amiga | amiga-*)
-                basic_machine=m68k-unknown
-                ;;
-        amigaos | amigados)
-                basic_machine=m68k-unknown
-                os=-amigaos
-                ;;
-        amigaunix | amix)
-                basic_machine=m68k-unknown
-                os=-sysv4
-                ;;
-        apollo68)
-                basic_machine=m68k-apollo
-                os=-sysv
-                ;;
-        apollo68bsd)
-                basic_machine=m68k-apollo
-                os=-bsd
-                ;;
-        aros)
-                basic_machine=i386-pc
-                os=-aros
-                ;;
-        aux)
-                basic_machine=m68k-apple
-                os=-aux
-                ;;
-        balance)
-                basic_machine=ns32k-sequent
-                os=-dynix
-                ;;
-        blackfin)
-                basic_machine=bfin-unknown
-                os=-linux
-                ;;
-        blackfin-*)
-                basic_machine=bfin-`echo $basic_machine | sed 's/^[^-]*-//'`
-                os=-linux
-                ;;
-        bluegene*)
-                basic_machine=powerpc-ibm
-                os=-cnk
-                ;;
-        c90)
-                basic_machine=c90-cray
-                os=-unicos
-                ;;
-        cegcc)
-                basic_machine=arm-unknown
-                os=-cegcc
-                ;;
-        convex-c1)
-                basic_machine=c1-convex
-                os=-bsd
-                ;;
-        convex-c2)
-                basic_machine=c2-convex
-                os=-bsd
-                ;;
-        convex-c32)
-                basic_machine=c32-convex
-                os=-bsd
-                ;;
-        convex-c34)
-                basic_machine=c34-convex
-                os=-bsd
-                ;;
-        convex-c38)
-                basic_machine=c38-convex
-                os=-bsd
-                ;;
-        cray | j90)
-                basic_machine=j90-cray
-                os=-unicos
-                ;;
-        craynv)
-                basic_machine=craynv-cray
-                os=-unicosmp
-                ;;
-        cr16)
-                basic_machine=cr16-unknown
-                os=-elf
-                ;;
-        crds | unos)
-                basic_machine=m68k-crds
-                ;;
-        crisv32 | crisv32-* | etraxfs*)
-                basic_machine=crisv32-axis
-                ;;
-        cris | cris-* | etrax*)
-                basic_machine=cris-axis
-                ;;
-        crx)
-                basic_machine=crx-unknown
-                os=-elf
-                ;;
-        da30 | da30-*)
-                basic_machine=m68k-da30
-                ;;
-        decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn)
-                basic_machine=mips-dec
-                ;;
-        decsystem10* | dec10*)
-                basic_machine=pdp10-dec
-                os=-tops10
-                ;;
-        decsystem20* | dec20*)
-                basic_machine=pdp10-dec
-                os=-tops20
-                ;;
-        delta | 3300 | motorola-3300 | motorola-delta \
-              | 3300-motorola | delta-motorola)
-                basic_machine=m68k-motorola
-                ;;
-        delta88)
-                basic_machine=m88k-motorola
-                os=-sysv3
-                ;;
-        dicos)
-                basic_machine=i686-pc
-                os=-dicos
-                ;;
-        djgpp)
-                basic_machine=i586-pc
-                os=-msdosdjgpp
-                ;;
-        dpx20 | dpx20-*)
-                basic_machine=rs6000-bull
-                os=-bosx
-                ;;
-        dpx2* | dpx2*-bull)
-                basic_machine=m68k-bull
-                os=-sysv3
-                ;;
-        ebmon29k)
-                basic_machine=a29k-amd
-                os=-ebmon
-                ;;
-        elxsi)
-                basic_machine=elxsi-elxsi
-                os=-bsd
-                ;;
-        encore | umax | mmax)
-                basic_machine=ns32k-encore
-                ;;
-        es1800 | OSE68k | ose68k | ose | OSE)
-                basic_machine=m68k-ericsson
-                os=-ose
-                ;;
-        fx2800)
-                basic_machine=i860-alliant
-                ;;
-        genix)
-                basic_machine=ns32k-ns
-                ;;
-        gmicro)
-                basic_machine=tron-gmicro
-                os=-sysv
-                ;;
-        go32)
-                basic_machine=i386-pc
-                os=-go32
-                ;;
-        h3050r* | hiux*)
-                basic_machine=hppa1.1-hitachi
-                os=-hiuxwe2
-                ;;
-        h8300hms)
-                basic_machine=h8300-hitachi
-                os=-hms
-                ;;
-        h8300xray)
-                basic_machine=h8300-hitachi
-                os=-xray
-                ;;
-        h8500hms)
-                basic_machine=h8500-hitachi
-                os=-hms
-                ;;
-        harris)
-                basic_machine=m88k-harris
-                os=-sysv3
-                ;;
-        hp300-*)
-                basic_machine=m68k-hp
-                ;;
-        hp300bsd)
-                basic_machine=m68k-hp
-                os=-bsd
-                ;;
-        hp300hpux)
-                basic_machine=m68k-hp
-                os=-hpux
-                ;;
-        hp3k9[0-9][0-9] | hp9[0-9][0-9])
-                basic_machine=hppa1.0-hp
-                ;;
-        hp9k2[0-9][0-9] | hp9k31[0-9])
-                basic_machine=m68000-hp
-                ;;
-        hp9k3[2-9][0-9])
-                basic_machine=m68k-hp
-                ;;
-        hp9k6[0-9][0-9] | hp6[0-9][0-9])
-                basic_machine=hppa1.0-hp
-                ;;
-        hp9k7[0-79][0-9] | hp7[0-79][0-9])
-                basic_machine=hppa1.1-hp
-                ;;
-        hp9k78[0-9] | hp78[0-9])
-                # FIXME: really hppa2.0-hp
-                basic_machine=hppa1.1-hp
-                ;;
-        hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893)
-                # FIXME: really hppa2.0-hp
-                basic_machine=hppa1.1-hp
-                ;;
-        hp9k8[0-9][13679] | hp8[0-9][13679])
-                basic_machine=hppa1.1-hp
-                ;;
-        hp9k8[0-9][0-9] | hp8[0-9][0-9])
-                basic_machine=hppa1.0-hp
-                ;;
-        hppa-next)
-                os=-nextstep3
-                ;;
-        hppaosf)
-                basic_machine=hppa1.1-hp
-                os=-osf
-                ;;
-        hppro)
-                basic_machine=hppa1.1-hp
-                os=-proelf
-                ;;
-        i370-ibm* | ibm*)
-                basic_machine=i370-ibm
-                ;;
-# I'm not sure what "Sysv32" means.  Should this be sysv3.2?
-        i*86v32)
-                basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
-                os=-sysv32
-                ;;
-        i*86v4*)
-                basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
-                os=-sysv4
-                ;;
-        i*86v)
-                basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
-                os=-sysv
-                ;;
-        i*86sol2)
-                basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
-                os=-solaris2
-                ;;
-        i386mach)
-                basic_machine=i386-mach
-                os=-mach
-                ;;
-        i386-vsta | vsta)
-                basic_machine=i386-unknown
-                os=-vsta
-                ;;
-        iris | iris4d)
-                basic_machine=mips-sgi
-                case $os in
-                    -irix*)
-                        ;;
-                    *)
-                        os=-irix4
-                        ;;
-                esac
-                ;;
-        isi68 | isi)
-                basic_machine=m68k-isi
-                os=-sysv
-                ;;
-        m68knommu)
-                basic_machine=m68k-unknown
-                os=-linux
-                ;;
-        m68knommu-*)
-                basic_machine=m68k-`echo $basic_machine | sed 's/^[^-]*-//'`
-                os=-linux
-                ;;
-        m88k-omron*)
-                basic_machine=m88k-omron
-                ;;
-        magnum | m3230)
-                basic_machine=mips-mips
-                os=-sysv
-                ;;
-        merlin)
-                basic_machine=ns32k-utek
-                os=-sysv
-                ;;
-        microblaze)
-                basic_machine=microblaze-xilinx
-                ;;
-        mingw32)
-                basic_machine=i386-pc
-                os=-mingw32
-                ;;
-        mingw32ce)
-                basic_machine=arm-unknown
-                os=-mingw32ce
-                ;;
-        miniframe)
-                basic_machine=m68000-convergent
-                ;;
-        *mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*)
-                basic_machine=m68k-atari
-                os=-mint
-                ;;
-        mips3*-*)
-                basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`
-                ;;
-        mips3*)
-                basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown
-                ;;
-        monitor)
-                basic_machine=m68k-rom68k
-                os=-coff
-                ;;
-        morphos)
-                basic_machine=powerpc-unknown
-                os=-morphos
-                ;;
-        msdos)
-                basic_machine=i386-pc
-                os=-msdos
-                ;;
-        ms1-*)
-                basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'`
-                ;;
-        mvs)
-                basic_machine=i370-ibm
-                os=-mvs
-                ;;
-        ncr3000)
-                basic_machine=i486-ncr
-                os=-sysv4
-                ;;
-        netbsd386)
-                basic_machine=i386-unknown
-                os=-netbsd
-                ;;
-        netwinder)
-                basic_machine=armv4l-rebel
-                os=-linux
-                ;;
-        news | news700 | news800 | news900)
-                basic_machine=m68k-sony
-                os=-newsos
-                ;;
-        news1000)
-                basic_machine=m68030-sony
-                os=-newsos
-                ;;
-        news-3600 | risc-news)
-                basic_machine=mips-sony
-                os=-newsos
-                ;;
-        necv70)
-                basic_machine=v70-nec
-                os=-sysv
-                ;;
-        next | m*-next )
-                basic_machine=m68k-next
-                case $os in
-                    -nextstep* )
-                        ;;
-                    -ns2*)
-                      os=-nextstep2
-                        ;;
-                    *)
-                      os=-nextstep3
-                        ;;
-                esac
-                ;;
-        nh3000)
-                basic_machine=m68k-harris
-                os=-cxux
-                ;;
-        nh[45]000)
-                basic_machine=m88k-harris
-                os=-cxux
-                ;;
-        nindy960)
-                basic_machine=i960-intel
-                os=-nindy
-                ;;
-        mon960)
-                basic_machine=i960-intel
-                os=-mon960
-                ;;
-        nonstopux)
-                basic_machine=mips-compaq
-                os=-nonstopux
-                ;;
-        np1)
-                basic_machine=np1-gould
-                ;;
-        nsr-tandem)
-                basic_machine=nsr-tandem
-                ;;
-        op50n-* | op60c-*)
-                basic_machine=hppa1.1-oki
-                os=-proelf
-                ;;
-        openrisc | openrisc-*)
-                basic_machine=or32-unknown
-                ;;
-        os400)
-                basic_machine=powerpc-ibm
-                os=-os400
-                ;;
-        OSE68000 | ose68000)
-                basic_machine=m68000-ericsson
-                os=-ose
-                ;;
-        os68k)
-                basic_machine=m68k-none
-                os=-os68k
-                ;;
-        pa-hitachi)
-                basic_machine=hppa1.1-hitachi
-                os=-hiuxwe2
-                ;;
-        paragon)
-                basic_machine=i860-intel
-                os=-osf
-                ;;
-        parisc)
-                basic_machine=hppa-unknown
-                os=-linux
-                ;;
-        parisc-*)
-                basic_machine=hppa-`echo $basic_machine | sed 's/^[^-]*-//'`
-                os=-linux
-                ;;
-        pbd)
-                basic_machine=sparc-tti
-                ;;
-        pbb)
-                basic_machine=m68k-tti
-                ;;
-        pc532 | pc532-*)
-                basic_machine=ns32k-pc532
-                ;;
-        pc98)
-                basic_machine=i386-pc
-                ;;
-        pc98-*)
-                basic_machine=i386-`echo $basic_machine | sed 's/^[^-]*-//'`
-                ;;
-        pentium | p5 | k5 | k6 | nexgen | viac3)
-                basic_machine=i586-pc
-                ;;
-        pentiumpro | p6 | 6x86 | athlon | athlon_*)
-                basic_machine=i686-pc
-                ;;
-        pentiumii | pentium2 | pentiumiii | pentium3)
-                basic_machine=i686-pc
-                ;;
-        pentium4)
-                basic_machine=i786-pc
-                ;;
-        pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*)
-                basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'`
-                ;;
-        pentiumpro-* | p6-* | 6x86-* | athlon-*)
-                basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
-                ;;
-        pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*)
-                basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
-                ;;
-        pentium4-*)
-                basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'`
-                ;;
-        pn)
-                basic_machine=pn-gould
-                ;;
-        power)  basic_machine=power-ibm
-                ;;
-        ppc)    basic_machine=powerpc-unknown
-                ;;
-        ppc-*)  basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
-                ;;
-        ppcle | powerpclittle | ppc-le | powerpc-little)
-                basic_machine=powerpcle-unknown
-                ;;
-        ppcle-* | powerpclittle-*)
-                basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'`
-                ;;
-        ppc64)  basic_machine=powerpc64-unknown
-                ;;
-        ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'`
-                ;;
-        ppc64le | powerpc64little | ppc64-le | powerpc64-little)
-                basic_machine=powerpc64le-unknown
-                ;;
-        ppc64le-* | powerpc64little-*)
-                basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'`
-                ;;
-        ps2)
-                basic_machine=i386-ibm
-                ;;
-        pw32)
-                basic_machine=i586-unknown
-                os=-pw32
-                ;;
-        rdos)
-                basic_machine=i386-pc
-                os=-rdos
-                ;;
-        rom68k)
-                basic_machine=m68k-rom68k
-                os=-coff
-                ;;
-        rm[46]00)
-                basic_machine=mips-siemens
-                ;;
-        rtpc | rtpc-*)
-                basic_machine=romp-ibm
-                ;;
-        s390 | s390-*)
-                basic_machine=s390-ibm
-                ;;
-        s390x | s390x-*)
-                basic_machine=s390x-ibm
-                ;;
-        sa29200)
-                basic_machine=a29k-amd
-                os=-udi
-                ;;
-        sb1)
-                basic_machine=mipsisa64sb1-unknown
-                ;;
-        sb1el)
-                basic_machine=mipsisa64sb1el-unknown
-                ;;
-        sde)
-                basic_machine=mipsisa32-sde
-                os=-elf
-                ;;
-        sei)
-                basic_machine=mips-sei
-                os=-seiux
-                ;;
-        sequent)
-                basic_machine=i386-sequent
-                ;;
-        sh)
-                basic_machine=sh-hitachi
-                os=-hms
-                ;;
-        sh5el)
-                basic_machine=sh5le-unknown
-                ;;
-        sh64)
-                basic_machine=sh64-unknown
-                ;;
-        sparclite-wrs | simso-wrs)
-                basic_machine=sparclite-wrs
-                os=-vxworks
-                ;;
-        sps7)
-                basic_machine=m68k-bull
-                os=-sysv2
-                ;;
-        spur)
-                basic_machine=spur-unknown
-                ;;
-        st2000)
-                basic_machine=m68k-tandem
-                ;;
-        stratus)
-                basic_machine=i860-stratus
-                os=-sysv4
-                ;;
-        sun2)
-                basic_machine=m68000-sun
-                ;;
-        sun2os3)
-                basic_machine=m68000-sun
-                os=-sunos3
-                ;;
-        sun2os4)
-                basic_machine=m68000-sun
-                os=-sunos4
-                ;;
-        sun3os3)
-                basic_machine=m68k-sun
-                os=-sunos3
-                ;;
-        sun3os4)
-                basic_machine=m68k-sun
-                os=-sunos4
-                ;;
-        sun4os3)
-                basic_machine=sparc-sun
-                os=-sunos3
-                ;;
-        sun4os4)
-                basic_machine=sparc-sun
-                os=-sunos4
-                ;;
-        sun4sol2)
-                basic_machine=sparc-sun
-                os=-solaris2
-                ;;
-        sun3 | sun3-*)
-                basic_machine=m68k-sun
-                ;;
-        sun4)
-                basic_machine=sparc-sun
-                ;;
-        sun386 | sun386i | roadrunner)
-                basic_machine=i386-sun
-                ;;
-        sv1)
-                basic_machine=sv1-cray
-                os=-unicos
-                ;;
-        symmetry)
-                basic_machine=i386-sequent
-                os=-dynix
-                ;;
-        t3e)
-                basic_machine=alphaev5-cray
-                os=-unicos
-                ;;
-        t90)
-                basic_machine=t90-cray
-                os=-unicos
-                ;;
-        tic54x | c54x*)
-                basic_machine=tic54x-unknown
-                os=-coff
-                ;;
-        tic55x | c55x*)
-                basic_machine=tic55x-unknown
-                os=-coff
-                ;;
-        tic6x | c6x*)
-                basic_machine=tic6x-unknown
-                os=-coff
-                ;;
-        # This must be matched before tile*.
-        tilegx*)
-                basic_machine=tilegx-unknown
-                os=-linux-gnu
-                ;;
-        tile*)
-                basic_machine=tile-unknown
-                os=-linux-gnu
-                ;;
-        tx39)
-                basic_machine=mipstx39-unknown
-                ;;
-        tx39el)
-                basic_machine=mipstx39el-unknown
-                ;;
-        toad1)
-                basic_machine=pdp10-xkl
-                os=-tops20
-                ;;
-        tower | tower-32)
-                basic_machine=m68k-ncr
-                ;;
-        tpf)
-                basic_machine=s390x-ibm
-                os=-tpf
-                ;;
-        udi29k)
-                basic_machine=a29k-amd
-                os=-udi
-                ;;
-        ultra3)
-                basic_machine=a29k-nyu
-                os=-sym1
-                ;;
-        v810 | necv810)
-                basic_machine=v810-nec
-                os=-none
-                ;;
-        vaxv)
-                basic_machine=vax-dec
-                os=-sysv
-                ;;
-        vms)
-                basic_machine=vax-dec
-                os=-vms
-                ;;
-        vpp*|vx|vx-*)
-                basic_machine=f301-fujitsu
-                ;;
-        vxworks960)
-                basic_machine=i960-wrs
-                os=-vxworks
-                ;;
-        vxworks68)
-                basic_machine=m68k-wrs
-                os=-vxworks
-                ;;
-        vxworks29k)
-                basic_machine=a29k-wrs
-                os=-vxworks
-                ;;
-        w65*)
-                basic_machine=w65-wdc
-                os=-none
-                ;;
-        w89k-*)
-                basic_machine=hppa1.1-winbond
-                os=-proelf
-                ;;
-        xbox)
-                basic_machine=i686-pc
-                os=-mingw32
-                ;;
-        xps | xps100)
-                basic_machine=xps100-honeywell
-                ;;
-        ymp)
-                basic_machine=ymp-cray
-                os=-unicos
-                ;;
-        z8k-*-coff)
-                basic_machine=z8k-unknown
-                os=-sim
-                ;;
-        z80-*-coff)
-                basic_machine=z80-unknown
-                os=-sim
-                ;;
-        none)
-                basic_machine=none-none
-                os=-none
-                ;;
-
-# Here we handle the default manufacturer of certain CPU types.  It is in
-# some cases the only manufacturer, in others, it is the most popular.
-        w89k)
-                basic_machine=hppa1.1-winbond
-                ;;
-        op50n)
-                basic_machine=hppa1.1-oki
-                ;;
-        op60c)
-                basic_machine=hppa1.1-oki
-                ;;
-        romp)
-                basic_machine=romp-ibm
-                ;;
-        mmix)
-                basic_machine=mmix-knuth
-                ;;
-        rs6000)
-                basic_machine=rs6000-ibm
-                ;;
-        vax)
-                basic_machine=vax-dec
-                ;;
-        pdp10)
-                # there are many clones, so DEC is not a safe bet
-                basic_machine=pdp10-unknown
-                ;;
-        pdp11)
-                basic_machine=pdp11-dec
-                ;;
-        we32k)
-                basic_machine=we32k-att
-                ;;
-        sh[1234] | sh[24]a | sh[24]aeb | sh[34]eb | sh[1234]le | sh[23]ele)
-                basic_machine=sh-unknown
-                ;;
-        sparc | sparcv8 | sparcv9 | sparcv9b | sparcv9v)
-                basic_machine=sparc-sun
-                ;;
-        cydra)
-                basic_machine=cydra-cydrome
-                ;;
-        orion)
-                basic_machine=orion-highlevel
-                ;;
-        orion105)
-                basic_machine=clipper-highlevel
-                ;;
-        mac | mpw | mac-mpw)
-                basic_machine=m68k-apple
-                ;;
-        pmac | pmac-mpw)
-                basic_machine=powerpc-apple
-                ;;
-        *-unknown)
-                # Make sure to match an already-canonicalized machine name.
-                ;;
-        *)
-                echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
-                exit 1
-                ;;
-esac
-
-# Here we canonicalize certain aliases for manufacturers.
-case $basic_machine in
-        *-digital*)
-                basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'`
-                ;;
-        *-commodore*)
-                basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'`
-                ;;
-        *)
-                ;;
-esac
-
-# Decode manufacturer-specific aliases for certain operating systems.
-
-if [ x"$os" != x"" ]
-then
-case $os in
-        # First match some system type aliases
-        # that might get confused with valid system types.
-        # -solaris* is a basic system type, with this one exception.
-        -auroraux)
-                os=-auroraux
-                ;;
-        -solaris1 | -solaris1.*)
-                os=`echo $os | sed -e 's|solaris1|sunos4|'`
-                ;;
-        -solaris)
-                os=-solaris2
-                ;;
-        -svr4*)
-                os=-sysv4
-                ;;
-        -unixware*)
-                os=-sysv4.2uw
-                ;;
-        -gnu/linux*)
-                os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'`
-                ;;
-        # First accept the basic system types.
-        # The portable systems comes first.
-        # Each alternative MUST END IN A *, to match a version number.
-        # -sysv* is not here because it comes later, after sysvr4.
-        -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \
-              | -*vms* | -sco* | -esix* | -isc* | -aix* | -cnk* | -sunos | -sunos[34]*\
-              | -hpux* | -unos* | -osf* | -luna* | -dgux* | -auroraux* | -solaris* \
-              | -sym* | -kopensolaris* \
-              | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \
-              | -aos* | -aros* \
-              | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
-              | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
-              | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \
-              | -openbsd* | -solidbsd* \
-              | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \
-              | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
-              | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
-              | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
-              | -chorusos* | -chorusrdb* | -cegcc* \
-              | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
-              | -mingw32* | -linux-gnu* | -linux-newlib* | -linux-uclibc* \
-              | -uxpv* | -beos* | -mpeix* | -udk* \
-              | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \
-              | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
-              | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \
-              | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \
-              | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \
-              | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \
-              | -skyos* | -haiku* | -rdos* | -toppers* | -drops* | -es*)
-        # Remember, each alternative MUST END IN *, to match a version number.
-                ;;
-        -qnx*)
-                case $basic_machine in
-                    x86-* | i*86-*)
-                        ;;
-                    *)
-                        os=-nto$os
-                        ;;
-                esac
-                ;;
-        -nto-qnx*)
-                ;;
-        -nto*)
-                os=`echo $os | sed -e 's|nto|nto-qnx|'`
-                ;;
-        -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \
-              | -windows* | -osx | -abug | -netware* | -os9* | -beos* | -haiku* \
-              | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*)
-                ;;
-        -mac*)
-                os=`echo $os | sed -e 's|mac|macos|'`
-                ;;
-        -linux-dietlibc)
-                os=-linux-dietlibc
-                ;;
-        -linux*)
-                os=`echo $os | sed -e 's|linux|linux-gnu|'`
-                ;;
-        -sunos5*)
-                os=`echo $os | sed -e 's|sunos5|solaris2|'`
-                ;;
-        -sunos6*)
-                os=`echo $os | sed -e 's|sunos6|solaris3|'`
-                ;;
-        -opened*)
-                os=-openedition
-                ;;
-        -os400*)
-                os=-os400
-                ;;
-        -wince*)
-                os=-wince
-                ;;
-        -osfrose*)
-                os=-osfrose
-                ;;
-        -osf*)
-                os=-osf
-                ;;
-        -utek*)
-                os=-bsd
-                ;;
-        -dynix*)
-                os=-bsd
-                ;;
-        -acis*)
-                os=-aos
-                ;;
-        -atheos*)
-                os=-atheos
-                ;;
-        -syllable*)
-                os=-syllable
-                ;;
-        -386bsd)
-                os=-bsd
-                ;;
-        -ctix* | -uts*)
-                os=-sysv
-                ;;
-        -nova*)
-                os=-rtmk-nova
-                ;;
-        -ns2 )
-                os=-nextstep2
-                ;;
-        -nsk*)
-                os=-nsk
-                ;;
-        # Preserve the version number of sinix5.
-        -sinix5.*)
-                os=`echo $os | sed -e 's|sinix|sysv|'`
-                ;;
-        -sinix*)
-                os=-sysv4
-                ;;
-        -tpf*)
-                os=-tpf
-                ;;
-        -triton*)
-                os=-sysv3
-                ;;
-        -oss*)
-                os=-sysv3
-                ;;
-        -svr4)
-                os=-sysv4
-                ;;
-        -svr3)
-                os=-sysv3
-                ;;
-        -sysvr4)
-                os=-sysv4
-                ;;
-        # This must come after -sysvr4.
-        -sysv*)
-                ;;
-        -ose*)
-                os=-ose
-                ;;
-        -es1800*)
-                os=-ose
-                ;;
-        -xenix)
-                os=-xenix
-                ;;
-        -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
-                os=-mint
-                ;;
-        -aros*)
-                os=-aros
-                ;;
-        -kaos*)
-                os=-kaos
-                ;;
-        -zvmoe)
-                os=-zvmoe
-                ;;
-        -dicos*)
-                os=-dicos
-                ;;
-        -nacl*)
-                ;;
-        -none)
-                ;;
-        *)
-                # Get rid of the `-' at the beginning of $os.
-                os=`echo $os | sed 's/[^-]*-//'`
-                echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2
-                exit 1
-                ;;
-esac
-else
-
-# Here we handle the default operating systems that come with various machines.
-# The value should be what the vendor currently ships out the door with their
-# machine or put another way, the most popular os provided with the machine.
-
-# Note that if you're going to try to match "-MANUFACTURER" here (say,
-# "-sun"), then you have to tell the case statement up towards the top
-# that MANUFACTURER isn't an operating system.  Otherwise, code above
-# will signal an error saying that MANUFACTURER isn't an operating
-# system, and we'll never get to this point.
-
-case $basic_machine in
-        score-*)
-                os=-elf
-                ;;
-        spu-*)
-                os=-elf
-                ;;
-        *-acorn)
-                os=-riscix1.2
-                ;;
-        arm*-rebel)
-                os=-linux
-                ;;
-        arm*-semi)
-                os=-aout
-                ;;
-        c4x-* | tic4x-*)
-                os=-coff
-                ;;
-        # This must come before the *-dec entry.
-        pdp10-*)
-                os=-tops20
-                ;;
-        pdp11-*)
-                os=-none
-                ;;
-        *-dec | vax-*)
-                os=-ultrix4.2
-                ;;
-        m68*-apollo)
-                os=-domain
-                ;;
-        i386-sun)
-                os=-sunos4.0.2
-                ;;
-        m68000-sun)
-                os=-sunos3
-                # This also exists in the configure program, but was not the
-                # default.
-                # os=-sunos4
-                ;;
-        m68*-cisco)
-                os=-aout
-                ;;
-        mep-*)
-                os=-elf
-                ;;
-        mips*-cisco)
-                os=-elf
-                ;;
-        mips*-*)
-                os=-elf
-                ;;
-        or32-*)
-                os=-coff
-                ;;
-        *-tti)  # must be before sparc entry or we get the wrong os.
-                os=-sysv3
-                ;;
-        sparc-* | *-sun)
-                os=-sunos4.1.1
-                ;;
-        *-be)
-                os=-beos
-                ;;
-        *-haiku)
-                os=-haiku
-                ;;
-        *-ibm)
-                os=-aix
-                ;;
-        *-knuth)
-                os=-mmixware
-                ;;
-        *-wec)
-                os=-proelf
-                ;;
-        *-winbond)
-                os=-proelf
-                ;;
-        *-oki)
-                os=-proelf
-                ;;
-        *-hp)
-                os=-hpux
-                ;;
-        *-hitachi)
-                os=-hiux
-                ;;
-        i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent)
-                os=-sysv
-                ;;
-        *-cbm)
-                os=-amigaos
-                ;;
-        *-dg)
-                os=-dgux
-                ;;
-        *-dolphin)
-                os=-sysv3
-                ;;
-        m68k-ccur)
-                os=-rtu
-                ;;
-        m88k-omron*)
-                os=-luna
-                ;;
-        *-next )
-                os=-nextstep
-                ;;
-        *-sequent)
-                os=-ptx
-                ;;
-        *-crds)
-                os=-unos
-                ;;
-        *-ns)
-                os=-genix
-                ;;
-        i370-*)
-                os=-mvs
-                ;;
-        *-next)
-                os=-nextstep3
-                ;;
-        *-gould)
-                os=-sysv
-                ;;
-        *-highlevel)
-                os=-bsd
-                ;;
-        *-encore)
-                os=-bsd
-                ;;
-        *-sgi)
-                os=-irix
-                ;;
-        *-siemens)
-                os=-sysv4
-                ;;
-        *-masscomp)
-                os=-rtu
-                ;;
-        f30[01]-fujitsu | f700-fujitsu)
-                os=-uxpv
-                ;;
-        *-rom68k)
-                os=-coff
-                ;;
-        *-*bug)
-                os=-coff
-                ;;
-        *-apple)
-                os=-macos
-                ;;
-        *-atari*)
-                os=-mint
-                ;;
-        *)
-                os=-none
-                ;;
-esac
-fi
-
-# Here we handle the case where we know the os, and the CPU type, but not the
-# manufacturer.  We pick the logical manufacturer.
-vendor=unknown
-case $basic_machine in
-        *-unknown)
-                case $os in
-                        -riscix*)
-                                vendor=acorn
-                                ;;
-                        -sunos*)
-                                vendor=sun
-                                ;;
-                        -cnk*|-aix*)
-                                vendor=ibm
-                                ;;
-                        -beos*)
-                                vendor=be
-                                ;;
-                        -hpux*)
-                                vendor=hp
-                                ;;
-                        -mpeix*)
-                                vendor=hp
-                                ;;
-                        -hiux*)
-                                vendor=hitachi
-                                ;;
-                        -unos*)
-                                vendor=crds
-                                ;;
-                        -dgux*)
-                                vendor=dg
-                                ;;
-                        -luna*)
-                                vendor=omron
-                                ;;
-                        -genix*)
-                                vendor=ns
-                                ;;
-                        -mvs* | -opened*)
-                                vendor=ibm
-                                ;;
-                        -os400*)
-                                vendor=ibm
-                                ;;
-                        -ptx*)
-                                vendor=sequent
-                                ;;
-                        -tpf*)
-                                vendor=ibm
-                                ;;
-                        -vxsim* | -vxworks* | -windiss*)
-                                vendor=wrs
-                                ;;
-                        -aux*)
-                                vendor=apple
-                                ;;
-                        -hms*)
-                                vendor=hitachi
-                                ;;
-                        -mpw* | -macos*)
-                                vendor=apple
-                                ;;
-                        -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
-                                vendor=atari
-                                ;;
-                        -vos*)
-                                vendor=stratus
-                                ;;
-                esac
-                basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"`
-                ;;
-esac
-
-echo $basic_machine$os
-exit
-
-# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "timestamp='"
-# time-stamp-format: "%:y-%02m-%02d"
-# time-stamp-end: "'"
-# End:
diff --git a/libraries/eet/configure b/libraries/eet/configure
deleted file mode 100755
index 0687ffe..0000000
--- a/libraries/eet/configure
+++ /dev/null
@@ -1,16872 +0,0 @@
-#! /bin/sh
-# Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.67 for eet 1.6.0-alpha.
-#
-# Report bugs to <enlightenment-devel@lists.sourceforge.net>.
-#
-#
-# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
-# 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free Software
-# Foundation, Inc.
-#
-#
-# This configure script is free software; the Free Software Foundation
-# gives unlimited permission to copy, distribute and modify it.
-## -------------------- ##
-## M4sh Initialization. ##
-## -------------------- ##
-
-# Be more Bourne compatible
-DUALCASE=1; export DUALCASE # for MKS sh
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
-  emulate sh
-  NULLCMD=:
-  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
-  # is contrary to our usage.  Disable this feature.
-  alias -g '${1+"$@"}'='"$@"'
-  setopt NO_GLOB_SUBST
-else
-  case `(set -o) 2>/dev/null` in #(
-  *posix*) :
-    set -o posix ;; #(
-  *) :
-     ;;
-esac
-fi
-
-
-as_nl='
-'
-export as_nl
-# Printing a long string crashes Solaris 7 /usr/bin/printf.
-as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
-as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
-as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
-# Prefer a ksh shell builtin over an external printf program on Solaris,
-# but without wasting forks for bash or zsh.
-if test -z "$BASH_VERSION$ZSH_VERSION" \
-    && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
-  as_echo='print -r --'
-  as_echo_n='print -rn --'
-elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
-  as_echo='printf %s\n'
-  as_echo_n='printf %s'
-else
-  if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
-    as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
-    as_echo_n='/usr/ucb/echo -n'
-  else
-    as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
-    as_echo_n_body='eval
-      arg=$1;
-      case $arg in #(
-      *"$as_nl"*)
-        expr "X$arg" : "X\\(.*\\)$as_nl";
-        arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
-      esac;
-      expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
-    '
-    export as_echo_n_body
-    as_echo_n='sh -c $as_echo_n_body as_echo'
-  fi
-  export as_echo_body
-  as_echo='sh -c $as_echo_body as_echo'
-fi
-
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
-  PATH_SEPARATOR=:
-  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
-    (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
-      PATH_SEPARATOR=';'
-  }
-fi
-
-
-# IFS
-# We need space, tab and new line, in precisely that order.  Quoting is
-# there to prevent editors from complaining about space-tab.
-# (If _AS_PATH_WALK were called with IFS unset, it would disable word
-# splitting by setting IFS to empty value.)
-IFS=" ""        $as_nl"
-
-# Find who we are.  Look in the path if we contain no directory separator.
-case $0 in #((
-  *[\\/]* ) as_myself=$0 ;;
-  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-  done
-IFS=$as_save_IFS
-
-     ;;
-esac
-# We did not find ourselves, most probably we were run as `sh COMMAND'
-# in which case we are not to be found in the path.
-if test "x$as_myself" = x; then
-  as_myself=$0
-fi
-if test ! -f "$as_myself"; then
-  $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
-  exit 1
-fi
-
-# Unset variables that we do not need and which cause bugs (e.g. in
-# pre-3.0 UWIN ksh).  But do not cause bugs in bash 2.01; the "|| exit 1"
-# suppresses any "Segmentation fault" message there.  '((' could
-# trigger a bug in pdksh 5.2.14.
-for as_var in BASH_ENV ENV MAIL MAILPATH
-do eval test x\${$as_var+set} = xset \
-  && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
-done
-PS1='$ '
-PS2='> '
-PS4='+ '
-
-# NLS nuisances.
-LC_ALL=C
-export LC_ALL
-LANGUAGE=C
-export LANGUAGE
-
-# CDPATH.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-
-if test "x$CONFIG_SHELL" = x; then
-  as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then :
-  emulate sh
-  NULLCMD=:
-  # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which
-  # is contrary to our usage.  Disable this feature.
-  alias -g '\${1+\"\$@\"}'='\"\$@\"'
-  setopt NO_GLOB_SUBST
-else
-  case \`(set -o) 2>/dev/null\` in #(
-  *posix*) :
-    set -o posix ;; #(
-  *) :
-     ;;
-esac
-fi
-"
-  as_required="as_fn_return () { (exit \$1); }
-as_fn_success () { as_fn_return 0; }
-as_fn_failure () { as_fn_return 1; }
-as_fn_ret_success () { return 0; }
-as_fn_ret_failure () { return 1; }
-
-exitcode=0
-as_fn_success || { exitcode=1; echo as_fn_success failed.; }
-as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; }
-as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; }
-as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; }
-if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then :
-
-else
-  exitcode=1; echo positional parameters were not saved.
-fi
-test x\$exitcode = x0 || exit 1"
-  as_suggested="  as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO
-  as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO
-  eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
-  test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1
-test \$(( 1 + 1 )) = 2 || exit 1"
-  if (eval "$as_required") 2>/dev/null; then :
-  as_have_required=yes
-else
-  as_have_required=no
-fi
-  if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then :
-
-else
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-as_found=false
-for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  as_found=:
-  case $as_dir in #(
-         /*)
-           for as_base in sh bash ksh sh5; do
-             # Try only shells that exist, to save several forks.
-             as_shell=$as_dir/$as_base
-             if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
-                    { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then :
-  CONFIG_SHELL=$as_shell as_have_required=yes
-                   if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then :
-  break 2
-fi
-fi
-           done;;
-       esac
-  as_found=false
-done
-$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } &&
-              { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then :
-  CONFIG_SHELL=$SHELL as_have_required=yes
-fi; }
-IFS=$as_save_IFS
-
-
-      if test "x$CONFIG_SHELL" != x; then :
-  # We cannot yet assume a decent shell, so we have to provide a
-        # neutralization value for shells without unset; and this also
-        # works around shells that cannot unset nonexistent variables.
-        BASH_ENV=/dev/null
-        ENV=/dev/null
-        (unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
-        export CONFIG_SHELL
-        exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"}
-fi
-
-    if test x$as_have_required = xno; then :
-  $as_echo "$0: This script requires a shell more modern than all"
-  $as_echo "$0: the shells that I found on your system."
-  if test x${ZSH_VERSION+set} = xset ; then
-    $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should"
-    $as_echo "$0: be upgraded to zsh 4.3.4 or later."
-  else
-    $as_echo "$0: Please tell bug-autoconf@gnu.org and
-$0: enlightenment-devel@lists.sourceforge.net about your
-$0: system, including any error possibly output before this
-$0: message. Then install a modern shell, or manually run
-$0: the script under such a shell if you do have one."
-  fi
-  exit 1
-fi
-fi
-fi
-SHELL=${CONFIG_SHELL-/bin/sh}
-export SHELL
-# Unset more variables known to interfere with behavior of common tools.
-CLICOLOR_FORCE= GREP_OPTIONS=
-unset CLICOLOR_FORCE GREP_OPTIONS
-
-## --------------------- ##
-## M4sh Shell Functions. ##
-## --------------------- ##
-# as_fn_unset VAR
-# ---------------
-# Portably unset VAR.
-as_fn_unset ()
-{
-  { eval $1=; unset $1;}
-}
-as_unset=as_fn_unset
-
-# as_fn_set_status STATUS
-# -----------------------
-# Set $? to STATUS, without forking.
-as_fn_set_status ()
-{
-  return $1
-} # as_fn_set_status
-
-# as_fn_exit STATUS
-# -----------------
-# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
-as_fn_exit ()
-{
-  set +e
-  as_fn_set_status $1
-  exit $1
-} # as_fn_exit
-
-# as_fn_mkdir_p
-# -------------
-# Create "$as_dir" as a directory, including parents if necessary.
-as_fn_mkdir_p ()
-{
-
-  case $as_dir in #(
-  -*) as_dir=./$as_dir;;
-  esac
-  test -d "$as_dir" || eval $as_mkdir_p || {
-    as_dirs=
-    while :; do
-      case $as_dir in #(
-      *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
-      *) as_qdir=$as_dir;;
-      esac
-      as_dirs="'$as_qdir' $as_dirs"
-      as_dir=`$as_dirname -- "$as_dir" ||
-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-         X"$as_dir" : 'X\(//\)[^/]' \| \
-         X"$as_dir" : 'X\(//\)$' \| \
-         X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X"$as_dir" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-            s//\1/
-            q
-          }
-          /^X\(\/\/\)[^/].*/{
-            s//\1/
-            q
-          }
-          /^X\(\/\/\)$/{
-            s//\1/
-            q
-          }
-          /^X\(\/\).*/{
-            s//\1/
-            q
-          }
-          s/.*/./; q'`
-      test -d "$as_dir" && break
-    done
-    test -z "$as_dirs" || eval "mkdir $as_dirs"
-  } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
-
-
-} # as_fn_mkdir_p
-# as_fn_append VAR VALUE
-# ----------------------
-# Append the text in VALUE to the end of the definition contained in VAR. Take
-# advantage of any shell optimizations that allow amortized linear growth over
-# repeated appends, instead of the typical quadratic growth present in naive
-# implementations.
-if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
-  eval 'as_fn_append ()
-  {
-    eval $1+=\$2
-  }'
-else
-  as_fn_append ()
-  {
-    eval $1=\$$1\$2
-  }
-fi # as_fn_append
-
-# as_fn_arith ARG...
-# ------------------
-# Perform arithmetic evaluation on the ARGs, and store the result in the
-# global $as_val. Take advantage of shells that can avoid forks. The arguments
-# must be portable across $(()) and expr.
-if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
-  eval 'as_fn_arith ()
-  {
-    as_val=$(( $* ))
-  }'
-else
-  as_fn_arith ()
-  {
-    as_val=`expr "$@" || test $? -eq 1`
-  }
-fi # as_fn_arith
-
-
-# as_fn_error STATUS ERROR [LINENO LOG_FD]
-# ----------------------------------------
-# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
-# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
-# script with STATUS, using 1 if that was 0.
-as_fn_error ()
-{
-  as_status=$1; test $as_status -eq 0 && as_status=1
-  if test "$4"; then
-    as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
-    $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
-  fi
-  $as_echo "$as_me: error: $2" >&2
-  as_fn_exit $as_status
-} # as_fn_error
-
-if expr a : '\(a\)' >/dev/null 2>&1 &&
-   test "X`expr 00001 : '.*\(...\)'`" = X001; then
-  as_expr=expr
-else
-  as_expr=false
-fi
-
-if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
-  as_basename=basename
-else
-  as_basename=false
-fi
-
-if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
-  as_dirname=dirname
-else
-  as_dirname=false
-fi
-
-as_me=`$as_basename -- "$0" ||
-$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
-         X"$0" : 'X\(//\)$' \| \
-         X"$0" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X/"$0" |
-    sed '/^.*\/\([^/][^/]*\)\/*$/{
-            s//\1/
-            q
-          }
-          /^X\/\(\/\/\)$/{
-            s//\1/
-            q
-          }
-          /^X\/\(\/\).*/{
-            s//\1/
-            q
-          }
-          s/.*/./; q'`
-
-# Avoid depending upon Character Ranges.
-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-as_cr_digits='0123456789'
-as_cr_alnum=$as_cr_Letters$as_cr_digits
-
-
-  as_lineno_1=$LINENO as_lineno_1a=$LINENO
-  as_lineno_2=$LINENO as_lineno_2a=$LINENO
-  eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" &&
-  test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || {
-  # Blame Lee E. McMahon (1931-1989) for sed's syntax.  :-)
-  sed -n '
-    p
-    /[$]LINENO/=
-  ' <$as_myself |
-    sed '
-      s/[$]LINENO.*/&-/
-      t lineno
-      b
-      :lineno
-      N
-      :loop
-      s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
-      t loop
-      s/-\n.*//
-    ' >$as_me.lineno &&
-  chmod +x "$as_me.lineno" ||
-    { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; }
-
-  # Don't try to exec as it changes $[0], causing all sort of problems
-  # (the dirname of $[0] is not the place where we might find the
-  # original and so on.  Autoconf is especially sensitive to this).
-  . "./$as_me.lineno"
-  # Exit status is that of the last command.
-  exit
-}
-
-ECHO_C= ECHO_N= ECHO_T=
-case `echo -n x` in #(((((
--n*)
-  case `echo 'xy\c'` in
-  *c*) ECHO_T=' ';;     # ECHO_T is single tab character.
-  xy)  ECHO_C='\c';;
-  *)   echo `echo ksh88 bug on AIX 6.1` > /dev/null
-       ECHO_T=' ';;
-  esac;;
-*)
-  ECHO_N='-n';;
-esac
-
-rm -f conf$$ conf$$.exe conf$$.file
-if test -d conf$$.dir; then
-  rm -f conf$$.dir/conf$$.file
-else
-  rm -f conf$$.dir
-  mkdir conf$$.dir 2>/dev/null
-fi
-if (echo >conf$$.file) 2>/dev/null; then
-  if ln -s conf$$.file conf$$ 2>/dev/null; then
-    as_ln_s='ln -s'
-    # ... but there are two gotchas:
-    # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
-    # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
-    # In both cases, we have to default to `cp -p'.
-    ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
-      as_ln_s='cp -p'
-  elif ln conf$$.file conf$$ 2>/dev/null; then
-    as_ln_s=ln
-  else
-    as_ln_s='cp -p'
-  fi
-else
-  as_ln_s='cp -p'
-fi
-rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
-rmdir conf$$.dir 2>/dev/null
-
-if mkdir -p . 2>/dev/null; then
-  as_mkdir_p='mkdir -p "$as_dir"'
-else
-  test -d ./-p && rmdir ./-p
-  as_mkdir_p=false
-fi
-
-if test -x / >/dev/null 2>&1; then
-  as_test_x='test -x'
-else
-  if ls -dL / >/dev/null 2>&1; then
-    as_ls_L_option=L
-  else
-    as_ls_L_option=
-  fi
-  as_test_x='
-    eval sh -c '\''
-      if test -d "$1"; then
-        test -d "$1/.";
-      else
-        case $1 in #(
-        -*)set "./$1";;
-        esac;
-        case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((
-        ???[sx]*):;;*)false;;esac;fi
-    '\'' sh
-  '
-fi
-as_executable_p=$as_test_x
-
-# Sed expression to map a string onto a valid CPP name.
-as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
-
-# Sed expression to map a string onto a valid variable name.
-as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
-
-
-
-# Check that we are running under the correct shell.
-SHELL=${CONFIG_SHELL-/bin/sh}
-
-case X$lt_ECHO in
-X*--fallback-echo)
-  # Remove one level of quotation (which was required for Make).
-  ECHO=`echo "$lt_ECHO" | sed 's,\\\\\$\\$0,'$0','`
-  ;;
-esac
-
-ECHO=${lt_ECHO-echo}
-if test "X$1" = X--no-reexec; then
-  # Discard the --no-reexec flag, and continue.
-  shift
-elif test "X$1" = X--fallback-echo; then
-  # Avoid inline document here, it may be left over
-  :
-elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' ; then
-  # Yippee, $ECHO works!
-  :
-else
-  # Restart under the correct shell.
-  exec $SHELL "$0" --no-reexec ${1+"$@"}
-fi
-
-if test "X$1" = X--fallback-echo; then
-  # used as fallback echo
-  shift
-  cat <<_LT_EOF
-$*
-_LT_EOF
-  exit 0
-fi
-
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-
-if test -z "$lt_ECHO"; then
-  if test "X${echo_test_string+set}" != Xset; then
-    # find a string as large as possible, as long as the shell can cope with it
-    for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do
-      # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
-      if { echo_test_string=`eval $cmd`; } 2>/dev/null &&
-         { test "X$echo_test_string" = "X$echo_test_string"; } 2>/dev/null
-      then
-        break
-      fi
-    done
-  fi
-
-  if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' &&
-     echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` &&
-     test "X$echo_testing_string" = "X$echo_test_string"; then
-    :
-  else
-    # The Solaris, AIX, and Digital Unix default echo programs unquote
-    # backslashes.  This makes it impossible to quote backslashes using
-    #   echo "$something" | sed 's/\\/\\\\/g'
-    #
-    # So, first we look for a working echo in the user's PATH.
-
-    lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-    for dir in $PATH /usr/ucb; do
-      IFS="$lt_save_ifs"
-      if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
-         test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
-         echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
-         test "X$echo_testing_string" = "X$echo_test_string"; then
-        ECHO="$dir/echo"
-        break
-      fi
-    done
-    IFS="$lt_save_ifs"
-
-    if test "X$ECHO" = Xecho; then
-      # We didn't find a better echo, so look for alternatives.
-      if test "X`{ print -r '\t'; } 2>/dev/null`" = 'X\t' &&
-         echo_testing_string=`{ print -r "$echo_test_string"; } 2>/dev/null` &&
-         test "X$echo_testing_string" = "X$echo_test_string"; then
-        # This shell has a builtin print -r that does the trick.
-        ECHO='print -r'
-      elif { test -f /bin/ksh || test -f /bin/ksh$ac_exeext; } &&
-           test "X$CONFIG_SHELL" != X/bin/ksh; then
-        # If we have ksh, try running configure again with it.
-        ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
-        export ORIGINAL_CONFIG_SHELL
-        CONFIG_SHELL=/bin/ksh
-        export CONFIG_SHELL
-        exec $CONFIG_SHELL "$0" --no-reexec ${1+"$@"}
-      else
-        # Try using printf.
-        ECHO='printf %s\n'
-        if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' &&
-           echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` &&
-           test "X$echo_testing_string" = "X$echo_test_string"; then
-          # Cool, printf works
-          :
-        elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
-             test "X$echo_testing_string" = 'X\t' &&
-             echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
-             test "X$echo_testing_string" = "X$echo_test_string"; then
-          CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
-          export CONFIG_SHELL
-          SHELL="$CONFIG_SHELL"
-          export SHELL
-          ECHO="$CONFIG_SHELL $0 --fallback-echo"
-        elif echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
-             test "X$echo_testing_string" = 'X\t' &&
-             echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
-             test "X$echo_testing_string" = "X$echo_test_string"; then
-          ECHO="$CONFIG_SHELL $0 --fallback-echo"
-        else
-          # maybe with a smaller string...
-          prev=:
-
-          for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do
-            if { test "X$echo_test_string" = "X`eval $cmd`"; } 2>/dev/null
-            then
-              break
-            fi
-            prev="$cmd"
-          done
-
-          if test "$prev" != 'sed 50q "$0"'; then
-            echo_test_string=`eval $prev`
-            export echo_test_string
-            exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "$0" ${1+"$@"}
-          else
-            # Oops.  We lost completely, so just stick with echo.
-            ECHO=echo
-          fi
-        fi
-      fi
-    fi
-  fi
-fi
-
-# Copy echo and quote the copy suitably for passing to libtool from
-# the Makefile, instead of quoting the original, which is used later.
-lt_ECHO=$ECHO
-if test "X$lt_ECHO" = "X$CONFIG_SHELL $0 --fallback-echo"; then
-   lt_ECHO="$CONFIG_SHELL \\\$\$0 --fallback-echo"
-fi
-
-
-
-
-test -n "$DJDIR" || exec 7<&0 </dev/null
-exec 6>&1
-
-# Name of the host.
-# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status,
-# so uname gets run too.
-ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
-
-#
-# Initializations.
-#
-ac_default_prefix=/usr/local
-ac_clean_files=
-ac_config_libobj_dir=.
-LIBOBJS=
-cross_compiling=no
-subdirs=
-MFLAGS=
-MAKEFLAGS=
-
-# Identity of this package.
-PACKAGE_NAME='eet'
-PACKAGE_TARNAME='eet'
-PACKAGE_VERSION='1.6.0-alpha'
-PACKAGE_STRING='eet 1.6.0-alpha'
-PACKAGE_BUGREPORT='enlightenment-devel@lists.sourceforge.net'
-PACKAGE_URL=''
-
-ac_unique_file="configure.ac"
-# Factoring default headers for most tests.
-ac_includes_default="\
-#include <stdio.h>
-#ifdef HAVE_SYS_TYPES_H
-# include <sys/types.h>
-#endif
-#ifdef HAVE_SYS_STAT_H
-# include <sys/stat.h>
-#endif
-#ifdef STDC_HEADERS
-# include <stdlib.h>
-# include <stddef.h>
-#else
-# ifdef HAVE_STDLIB_H
-#  include <stdlib.h>
-# endif
-#endif
-#ifdef HAVE_STRING_H
-# if !defined STDC_HEADERS && defined HAVE_MEMORY_H
-#  include <memory.h>
-# endif
-# include <string.h>
-#endif
-#ifdef HAVE_STRINGS_H
-# include <strings.h>
-#endif
-#ifdef HAVE_INTTYPES_H
-# include <inttypes.h>
-#endif
-#ifdef HAVE_STDINT_H
-# include <stdint.h>
-#endif
-#ifdef HAVE_UNISTD_H
-# include <unistd.h>
-#endif"
-
-ac_subst_vars='am__EXEEXT_FALSE
-am__EXEEXT_TRUE
-LTLIBOBJS
-LIBOBJS
-requirement_eet
-EFL_FNMATCH_LIBS
-ALLOCA
-lt_enable_auto_import
-EET_CFLAGS
-EET_CPPFLAGS
-OPENSSL_LIBS
-OPENSSL_CFLAGS
-LIBGCRYPT_LIBS
-LIBGCRYPT_CFLAGS
-LIBGCRYPT_CONFIG
-GNUTLS_LIBS
-GNUTLS_CFLAGS
-EXOTIC_LIBS
-EXOTIC_CFLAGS
-EINA_LIBS
-EINA_CFLAGS
-EET_LIBS
-EFL_EET_BUILD
-EVIL_LIBS
-EVIL_CFLAGS
-EFL_BUILD_DOC_FALSE
-EFL_BUILD_DOC_TRUE
-efl_doxygen
-efl_have_doxygen
-pkgconfig_requires_private
-DEBUG_CFLAGS
-EFL_ENABLE_COVERAGE_FALSE
-EFL_ENABLE_COVERAGE_TRUE
-EFL_COVERAGE_LIBS
-EFL_COVERAGE_CFLAGS
-have_lcov
-EFL_ENABLE_TESTS_FALSE
-EFL_ENABLE_TESTS_TRUE
-CHECK_LIBS
-CHECK_CFLAGS
-PKG_CONFIG_LIBDIR
-PKG_CONFIG_PATH
-PKG_CONFIG
-BUILD_EXAMPLES_FALSE
-BUILD_EXAMPLES_TRUE
-INSTALL_EXAMPLES_FALSE
-INSTALL_EXAMPLES_TRUE
-BUILD_EET_FALSE
-BUILD_EET_TRUE
-EET_PRG
-EET_AMALGAMATION_FALSE
-EET_AMALGAMATION_TRUE
-VMAJ
-release_info
-version_info
-CPP
-OTOOL64
-OTOOL
-LIPO
-NMEDIT
-DSYMUTIL
-lt_ECHO
-RANLIB
-AR
-LN_S
-NM
-ac_ct_DUMPBIN
-DUMPBIN
-LD
-FGREP
-EGREP
-GREP
-SED
-am__fastdepCC_FALSE
-am__fastdepCC_TRUE
-CCDEPMODE
-AMDEPBACKSLASH
-AMDEP_FALSE
-AMDEP_TRUE
-am__quote
-am__include
-DEPDIR
-OBJEXT
-EXEEXT
-ac_ct_CC
-CPPFLAGS
-LDFLAGS
-CFLAGS
-CC
-LIBTOOL
-OBJDUMP
-DLLTOOL
-AS
-host_os
-host_vendor
-host_cpu
-host
-build_os
-build_vendor
-build_cpu
-build
-AM_BACKSLASH
-AM_DEFAULT_VERBOSITY
-am__untar
-am__tar
-AMTAR
-am__leading_dot
-SET_MAKE
-AWK
-mkdir_p
-MKDIR_P
-INSTALL_STRIP_PROGRAM
-STRIP
-install_sh
-MAKEINFO
-AUTOHEADER
-AUTOMAKE
-AUTOCONF
-ACLOCAL
-VERSION
-PACKAGE
-CYGPATH_W
-am__isrc
-INSTALL_DATA
-INSTALL_SCRIPT
-INSTALL_PROGRAM
-target_alias
-host_alias
-build_alias
-LIBS
-ECHO_T
-ECHO_N
-ECHO_C
-DEFS
-mandir
-localedir
-libdir
-psdir
-pdfdir
-dvidir
-htmldir
-infodir
-docdir
-oldincludedir
-includedir
-localstatedir
-sharedstatedir
-sysconfdir
-datadir
-datarootdir
-libexecdir
-sbindir
-bindir
-program_transform_name
-prefix
-exec_prefix
-PACKAGE_URL
-PACKAGE_BUGREPORT
-PACKAGE_STRING
-PACKAGE_VERSION
-PACKAGE_TARNAME
-PACKAGE_NAME
-PATH_SEPARATOR
-SHELL'
-ac_subst_files=''
-ac_user_opts='
-enable_option_checking
-enable_silent_rules
-enable_shared
-enable_static
-with_pic
-enable_fast_install
-enable_dependency_tracking
-with_gnu_ld
-enable_libtool_lock
-enable_amalgamation
-enable_eet
-enable_old_eet_file_format
-enable_openssl
-enable_cipher
-enable_signature
-enable_assert
-enable_install_examples
-enable_build_examples
-enable_tests
-enable_coverage
-enable_doc
-with_doxygen
-enable_gnutls
-with_libgcrypt_prefix
-with_libgcrypt_exec_prefix
-enable_new_gnutls_api
-'
-      ac_precious_vars='build_alias
-host_alias
-target_alias
-CC
-CFLAGS
-LDFLAGS
-LIBS
-CPPFLAGS
-CPP
-PKG_CONFIG
-PKG_CONFIG_PATH
-PKG_CONFIG_LIBDIR
-CHECK_CFLAGS
-CHECK_LIBS
-EVIL_CFLAGS
-EVIL_LIBS
-EINA_CFLAGS
-EINA_LIBS
-EXOTIC_CFLAGS
-EXOTIC_LIBS
-GNUTLS_CFLAGS
-GNUTLS_LIBS
-OPENSSL_CFLAGS
-OPENSSL_LIBS'
-
-
-# Initialize some variables set by options.
-ac_init_help=
-ac_init_version=false
-ac_unrecognized_opts=
-ac_unrecognized_sep=
-# The variables have the same names as the options, with
-# dashes changed to underlines.
-cache_file=/dev/null
-exec_prefix=NONE
-no_create=
-no_recursion=
-prefix=NONE
-program_prefix=NONE
-program_suffix=NONE
-program_transform_name=s,x,x,
-silent=
-site=
-srcdir=
-verbose=
-x_includes=NONE
-x_libraries=NONE
-
-# Installation directory options.
-# These are left unexpanded so users can "make install exec_prefix=/foo"
-# and all the variables that are supposed to be based on exec_prefix
-# by default will actually change.
-# Use braces instead of parens because sh, perl, etc. also accept them.
-# (The list follows the same order as the GNU Coding Standards.)
-bindir='${exec_prefix}/bin'
-sbindir='${exec_prefix}/sbin'
-libexecdir='${exec_prefix}/libexec'
-datarootdir='${prefix}/share'
-datadir='${datarootdir}'
-sysconfdir='${prefix}/etc'
-sharedstatedir='${prefix}/com'
-localstatedir='${prefix}/var'
-includedir='${prefix}/include'
-oldincludedir='/usr/include'
-docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
-infodir='${datarootdir}/info'
-htmldir='${docdir}'
-dvidir='${docdir}'
-pdfdir='${docdir}'
-psdir='${docdir}'
-libdir='${exec_prefix}/lib'
-localedir='${datarootdir}/locale'
-mandir='${datarootdir}/man'
-
-ac_prev=
-ac_dashdash=
-for ac_option
-do
-  # If the previous option needs an argument, assign it.
-  if test -n "$ac_prev"; then
-    eval $ac_prev=\$ac_option
-    ac_prev=
-    continue
-  fi
-
-  case $ac_option in
-  *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
-  *=)   ac_optarg= ;;
-  *)    ac_optarg=yes ;;
-  esac
-
-  # Accept the important Cygnus configure options, so we can diagnose typos.
-
-  case $ac_dashdash$ac_option in
-  --)
-    ac_dashdash=yes ;;
-
-  -bindir | --bindir | --bindi | --bind | --bin | --bi)
-    ac_prev=bindir ;;
-  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
-    bindir=$ac_optarg ;;
-
-  -build | --build | --buil | --bui | --bu)
-    ac_prev=build_alias ;;
-  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
-    build_alias=$ac_optarg ;;
-
-  -cache-file | --cache-file | --cache-fil | --cache-fi \
-  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
-    ac_prev=cache_file ;;
-  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
-  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
-    cache_file=$ac_optarg ;;
-
-  --config-cache | -C)
-    cache_file=config.cache ;;
-
-  -datadir | --datadir | --datadi | --datad)
-    ac_prev=datadir ;;
-  -datadir=* | --datadir=* | --datadi=* | --datad=*)
-    datadir=$ac_optarg ;;
-
-  -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \
-  | --dataroo | --dataro | --datar)
-    ac_prev=datarootdir ;;
-  -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \
-  | --dataroot=* | --dataroo=* | --dataro=* | --datar=*)
-    datarootdir=$ac_optarg ;;
-
-  -disable-* | --disable-*)
-    ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
-    # Reject names that are not valid shell variable names.
-    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
-      as_fn_error $? "invalid feature name: $ac_useropt"
-    ac_useropt_orig=$ac_useropt
-    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
-    case $ac_user_opts in
-      *"
-"enable_$ac_useropt"
-"*) ;;
-      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig"
-         ac_unrecognized_sep=', ';;
-    esac
-    eval enable_$ac_useropt=no ;;
-
-  -docdir | --docdir | --docdi | --doc | --do)
-    ac_prev=docdir ;;
-  -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*)
-    docdir=$ac_optarg ;;
-
-  -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv)
-    ac_prev=dvidir ;;
-  -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*)
-    dvidir=$ac_optarg ;;
-
-  -enable-* | --enable-*)
-    ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
-    # Reject names that are not valid shell variable names.
-    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
-      as_fn_error $? "invalid feature name: $ac_useropt"
-    ac_useropt_orig=$ac_useropt
-    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
-    case $ac_user_opts in
-      *"
-"enable_$ac_useropt"
-"*) ;;
-      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig"
-         ac_unrecognized_sep=', ';;
-    esac
-    eval enable_$ac_useropt=\$ac_optarg ;;
-
-  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
-  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
-  | --exec | --exe | --ex)
-    ac_prev=exec_prefix ;;
-  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
-  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
-  | --exec=* | --exe=* | --ex=*)
-    exec_prefix=$ac_optarg ;;
-
-  -gas | --gas | --ga | --g)
-    # Obsolete; use --with-gas.
-    with_gas=yes ;;
-
-  -help | --help | --hel | --he | -h)
-    ac_init_help=long ;;
-  -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
-    ac_init_help=recursive ;;
-  -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
-    ac_init_help=short ;;
-
-  -host | --host | --hos | --ho)
-    ac_prev=host_alias ;;
-  -host=* | --host=* | --hos=* | --ho=*)
-    host_alias=$ac_optarg ;;
-
-  -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht)
-    ac_prev=htmldir ;;
-  -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \
-  | --ht=*)
-    htmldir=$ac_optarg ;;
-
-  -includedir | --includedir | --includedi | --included | --include \
-  | --includ | --inclu | --incl | --inc)
-    ac_prev=includedir ;;
-  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
-  | --includ=* | --inclu=* | --incl=* | --inc=*)
-    includedir=$ac_optarg ;;
-
-  -infodir | --infodir | --infodi | --infod | --info | --inf)
-    ac_prev=infodir ;;
-  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
-    infodir=$ac_optarg ;;
-
-  -libdir | --libdir | --libdi | --libd)
-    ac_prev=libdir ;;
-  -libdir=* | --libdir=* | --libdi=* | --libd=*)
-    libdir=$ac_optarg ;;
-
-  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
-  | --libexe | --libex | --libe)
-    ac_prev=libexecdir ;;
-  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
-  | --libexe=* | --libex=* | --libe=*)
-    libexecdir=$ac_optarg ;;
-
-  -localedir | --localedir | --localedi | --localed | --locale)
-    ac_prev=localedir ;;
-  -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*)
-    localedir=$ac_optarg ;;
-
-  -localstatedir | --localstatedir | --localstatedi | --localstated \
-  | --localstate | --localstat | --localsta | --localst | --locals)
-    ac_prev=localstatedir ;;
-  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
-  | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*)
-    localstatedir=$ac_optarg ;;
-
-  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
-    ac_prev=mandir ;;
-  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
-    mandir=$ac_optarg ;;
-
-  -nfp | --nfp | --nf)
-    # Obsolete; use --without-fp.
-    with_fp=no ;;
-
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c | -n)
-    no_create=yes ;;
-
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
-    no_recursion=yes ;;
-
-  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
-  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
-  | --oldin | --oldi | --old | --ol | --o)
-    ac_prev=oldincludedir ;;
-  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
-  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
-  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
-    oldincludedir=$ac_optarg ;;
-
-  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
-    ac_prev=prefix ;;
-  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
-    prefix=$ac_optarg ;;
-
-  -program-prefix | --program-prefix | --program-prefi | --program-pref \
-  | --program-pre | --program-pr | --program-p)
-    ac_prev=program_prefix ;;
-  -program-prefix=* | --program-prefix=* | --program-prefi=* \
-  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
-    program_prefix=$ac_optarg ;;
-
-  -program-suffix | --program-suffix | --program-suffi | --program-suff \
-  | --program-suf | --program-su | --program-s)
-    ac_prev=program_suffix ;;
-  -program-suffix=* | --program-suffix=* | --program-suffi=* \
-  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
-    program_suffix=$ac_optarg ;;
-
-  -program-transform-name | --program-transform-name \
-  | --program-transform-nam | --program-transform-na \
-  | --program-transform-n | --program-transform- \
-  | --program-transform | --program-transfor \
-  | --program-transfo | --program-transf \
-  | --program-trans | --program-tran \
-  | --progr-tra | --program-tr | --program-t)
-    ac_prev=program_transform_name ;;
-  -program-transform-name=* | --program-transform-name=* \
-  | --program-transform-nam=* | --program-transform-na=* \
-  | --program-transform-n=* | --program-transform-=* \
-  | --program-transform=* | --program-transfor=* \
-  | --program-transfo=* | --program-transf=* \
-  | --program-trans=* | --program-tran=* \
-  | --progr-tra=* | --program-tr=* | --program-t=*)
-    program_transform_name=$ac_optarg ;;
-
-  -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd)
-    ac_prev=pdfdir ;;
-  -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*)
-    pdfdir=$ac_optarg ;;
-
-  -psdir | --psdir | --psdi | --psd | --ps)
-    ac_prev=psdir ;;
-  -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*)
-    psdir=$ac_optarg ;;
-
-  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-  | -silent | --silent | --silen | --sile | --sil)
-    silent=yes ;;
-
-  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
-    ac_prev=sbindir ;;
-  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
-  | --sbi=* | --sb=*)
-    sbindir=$ac_optarg ;;
-
-  -sharedstatedir | --sharedstatedir | --sharedstatedi \
-  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
-  | --sharedst | --shareds | --shared | --share | --shar \
-  | --sha | --sh)
-    ac_prev=sharedstatedir ;;
-  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
-  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
-  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
-  | --sha=* | --sh=*)
-    sharedstatedir=$ac_optarg ;;
-
-  -site | --site | --sit)
-    ac_prev=site ;;
-  -site=* | --site=* | --sit=*)
-    site=$ac_optarg ;;
-
-  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
-    ac_prev=srcdir ;;
-  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
-    srcdir=$ac_optarg ;;
-
-  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
-  | --syscon | --sysco | --sysc | --sys | --sy)
-    ac_prev=sysconfdir ;;
-  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
-  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
-    sysconfdir=$ac_optarg ;;
-
-  -target | --target | --targe | --targ | --tar | --ta | --t)
-    ac_prev=target_alias ;;
-  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
-    target_alias=$ac_optarg ;;
-
-  -v | -verbose | --verbose | --verbos | --verbo | --verb)
-    verbose=yes ;;
-
-  -version | --version | --versio | --versi | --vers | -V)
-    ac_init_version=: ;;
-
-  -with-* | --with-*)
-    ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
-    # Reject names that are not valid shell variable names.
-    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
-      as_fn_error $? "invalid package name: $ac_useropt"
-    ac_useropt_orig=$ac_useropt
-    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
-    case $ac_user_opts in
-      *"
-"with_$ac_useropt"
-"*) ;;
-      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig"
-         ac_unrecognized_sep=', ';;
-    esac
-    eval with_$ac_useropt=\$ac_optarg ;;
-
-  -without-* | --without-*)
-    ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`
-    # Reject names that are not valid shell variable names.
-    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
-      as_fn_error $? "invalid package name: $ac_useropt"
-    ac_useropt_orig=$ac_useropt
-    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
-    case $ac_user_opts in
-      *"
-"with_$ac_useropt"
-"*) ;;
-      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig"
-         ac_unrecognized_sep=', ';;
-    esac
-    eval with_$ac_useropt=no ;;
-
-  --x)
-    # Obsolete; use --with-x.
-    with_x=yes ;;
-
-  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
-  | --x-incl | --x-inc | --x-in | --x-i)
-    ac_prev=x_includes ;;
-  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
-  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
-    x_includes=$ac_optarg ;;
-
-  -x-libraries | --x-libraries | --x-librarie | --x-librari \
-  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
-    ac_prev=x_libraries ;;
-  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
-  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
-    x_libraries=$ac_optarg ;;
-
-  -*) as_fn_error $? "unrecognized option: \`$ac_option'
-Try \`$0 --help' for more information"
-    ;;
-
-  *=*)
-    ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
-    # Reject names that are not valid shell variable names.
-    case $ac_envvar in #(
-      '' | [0-9]* | *[!_$as_cr_alnum]* )
-      as_fn_error $? "invalid variable name: \`$ac_envvar'" ;;
-    esac
-    eval $ac_envvar=\$ac_optarg
-    export $ac_envvar ;;
-
-  *)
-    # FIXME: should be removed in autoconf 3.0.
-    $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2
-    expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
-      $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2
-    : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}
-    ;;
-
-  esac
-done
-
-if test -n "$ac_prev"; then
-  ac_option=--`echo $ac_prev | sed 's/_/-/g'`
-  as_fn_error $? "missing argument to $ac_option"
-fi
-
-if test -n "$ac_unrecognized_opts"; then
-  case $enable_option_checking in
-    no) ;;
-    fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;;
-    *)     $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;;
-  esac
-fi
-
-# Check all directory arguments for consistency.
-for ac_var in   exec_prefix prefix bindir sbindir libexecdir datarootdir \
-                datadir sysconfdir sharedstatedir localstatedir includedir \
-                oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
-                libdir localedir mandir
-do
-  eval ac_val=\$$ac_var
-  # Remove trailing slashes.
-  case $ac_val in
-    */ )
-      ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'`
-      eval $ac_var=\$ac_val;;
-  esac
-  # Be sure to have absolute directory names.
-  case $ac_val in
-    [\\/$]* | ?:[\\/]* )  continue;;
-    NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
-  esac
-  as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val"
-done
-
-# There might be people who depend on the old broken behavior: `$host'
-# used to hold the argument of --host etc.
-# FIXME: To remove some day.
-build=$build_alias
-host=$host_alias
-target=$target_alias
-
-# FIXME: To remove some day.
-if test "x$host_alias" != x; then
-  if test "x$build_alias" = x; then
-    cross_compiling=maybe
-    $as_echo "$as_me: WARNING: if you wanted to set the --build type, don't use --host.
-    If a cross compiler is detected then cross compile mode will be used" >&2
-  elif test "x$build_alias" != "x$host_alias"; then
-    cross_compiling=yes
-  fi
-fi
-
-ac_tool_prefix=
-test -n "$host_alias" && ac_tool_prefix=$host_alias-
-
-test "$silent" = yes && exec 6>/dev/null
-
-
-ac_pwd=`pwd` && test -n "$ac_pwd" &&
-ac_ls_di=`ls -di .` &&
-ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
-  as_fn_error $? "working directory cannot be determined"
-test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
-  as_fn_error $? "pwd does not report name of working directory"
-
-
-# Find the source files, if location was not specified.
-if test -z "$srcdir"; then
-  ac_srcdir_defaulted=yes
-  # Try the directory containing this script, then the parent directory.
-  ac_confdir=`$as_dirname -- "$as_myself" ||
-$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-         X"$as_myself" : 'X\(//\)[^/]' \| \
-         X"$as_myself" : 'X\(//\)$' \| \
-         X"$as_myself" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X"$as_myself" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-            s//\1/
-            q
-          }
-          /^X\(\/\/\)[^/].*/{
-            s//\1/
-            q
-          }
-          /^X\(\/\/\)$/{
-            s//\1/
-            q
-          }
-          /^X\(\/\).*/{
-            s//\1/
-            q
-          }
-          s/.*/./; q'`
-  srcdir=$ac_confdir
-  if test ! -r "$srcdir/$ac_unique_file"; then
-    srcdir=..
-  fi
-else
-  ac_srcdir_defaulted=no
-fi
-if test ! -r "$srcdir/$ac_unique_file"; then
-  test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
-  as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir"
-fi
-ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
-ac_abs_confdir=`(
-        cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg"
-        pwd)`
-# When building in place, set srcdir=.
-if test "$ac_abs_confdir" = "$ac_pwd"; then
-  srcdir=.
-fi
-# Remove unnecessary trailing slashes from srcdir.
-# Double slashes in file names in object file debugging info
-# mess up M-x gdb in Emacs.
-case $srcdir in
-*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
-esac
-for ac_var in $ac_precious_vars; do
-  eval ac_env_${ac_var}_set=\${${ac_var}+set}
-  eval ac_env_${ac_var}_value=\$${ac_var}
-  eval ac_cv_env_${ac_var}_set=\${${ac_var}+set}
-  eval ac_cv_env_${ac_var}_value=\$${ac_var}
-done
-
-#
-# Report the --help message.
-#
-if test "$ac_init_help" = "long"; then
-  # Omit some internal or obsolete options to make the list less imposing.
-  # This message is too long to be a string in the A/UX 3.1 sh.
-  cat <<_ACEOF
-\`configure' configures eet 1.6.0-alpha to adapt to many kinds of systems.
-
-Usage: $0 [OPTION]... [VAR=VALUE]...
-
-To assign environment variables (e.g., CC, CFLAGS...), specify them as
-VAR=VALUE.  See below for descriptions of some of the useful variables.
-
-Defaults for the options are specified in brackets.
-
-Configuration:
-  -h, --help              display this help and exit
-      --help=short        display options specific to this package
-      --help=recursive    display the short help of all the included packages
-  -V, --version           display version information and exit
-  -q, --quiet, --silent   do not print \`checking ...' messages
-      --cache-file=FILE   cache test results in FILE [disabled]
-  -C, --config-cache      alias for \`--cache-file=config.cache'
-  -n, --no-create         do not create output files
-      --srcdir=DIR        find the sources in DIR [configure dir or \`..']
-
-Installation directories:
-  --prefix=PREFIX         install architecture-independent files in PREFIX
-                          [$ac_default_prefix]
-  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
-                          [PREFIX]
-
-By default, \`make install' will install all the files in
-\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc.  You can specify
-an installation prefix other than \`$ac_default_prefix' using \`--prefix',
-for instance \`--prefix=\$HOME'.
-
-For better control, use the options below.
-
-Fine tuning of the installation directories:
-  --bindir=DIR            user executables [EPREFIX/bin]
-  --sbindir=DIR           system admin executables [EPREFIX/sbin]
-  --libexecdir=DIR        program executables [EPREFIX/libexec]
-  --sysconfdir=DIR        read-only single-machine data [PREFIX/etc]
-  --sharedstatedir=DIR    modifiable architecture-independent data [PREFIX/com]
-  --localstatedir=DIR     modifiable single-machine data [PREFIX/var]
-  --libdir=DIR            object code libraries [EPREFIX/lib]
-  --includedir=DIR        C header files [PREFIX/include]
-  --oldincludedir=DIR     C header files for non-gcc [/usr/include]
-  --datarootdir=DIR       read-only arch.-independent data root [PREFIX/share]
-  --datadir=DIR           read-only architecture-independent data [DATAROOTDIR]
-  --infodir=DIR           info documentation [DATAROOTDIR/info]
-  --localedir=DIR         locale-dependent data [DATAROOTDIR/locale]
-  --mandir=DIR            man documentation [DATAROOTDIR/man]
-  --docdir=DIR            documentation root [DATAROOTDIR/doc/eet]
-  --htmldir=DIR           html documentation [DOCDIR]
-  --dvidir=DIR            dvi documentation [DOCDIR]
-  --pdfdir=DIR            pdf documentation [DOCDIR]
-  --psdir=DIR             ps documentation [DOCDIR]
-_ACEOF
-
-  cat <<\_ACEOF
-
-Program names:
-  --program-prefix=PREFIX            prepend PREFIX to installed program names
-  --program-suffix=SUFFIX            append SUFFIX to installed program names
-  --program-transform-name=PROGRAM   run sed PROGRAM on installed program names
-
-System types:
-  --build=BUILD     configure for building on BUILD [guessed]
-  --host=HOST       cross-compile to build programs to run on HOST [BUILD]
-_ACEOF
-fi
-
-if test -n "$ac_init_help"; then
-  case $ac_init_help in
-     short | recursive ) echo "Configuration of eet 1.6.0-alpha:";;
-   esac
-  cat <<\_ACEOF
-
-Optional Features:
-  --disable-option-checking  ignore unrecognized --enable/--with options
-  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
-  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
-  --enable-silent-rules          less verbose build output (undo: `make V=1')
-  --disable-silent-rules         verbose build output (undo: `make V=0')
-  --enable-shared[=PKGS]  build shared libraries [default=yes]
-  --enable-static[=PKGS]  build static libraries [default=yes]
-  --enable-fast-install[=PKGS]
-                          optimize for fast installation [default=yes]
-  --disable-dependency-tracking  speeds up one-time build
-  --enable-dependency-tracking   do not reject slow dependency extractors
-  --disable-libtool-lock  avoid locking (might break parallel builds)
-  --enable-amalgamation   enable generation of one single file with all source
-                          code in it, helps compiler optimizations.
-  --disable-eet           disable building of eet
-  --disable-old-eet-file-format
-                          disable old eet file format support.
-                          [[default=enabled]]
-  --disable-openssl       disable openssl eet support
-  --disable-cipher        disable cipher support for eet API
-  --disable-signature     disable signature file support for eet
-  --enable-assert         enable assert, [[default=disabled]]
-  --disable-install-examples
-                          disable installing examples (compiled or just
-                          source). [default==enabled]
-  --enable-build-examples enable building examples. [default==disabled]
-  --enable-tests          enable tests [default=disabled]
-  --enable-coverage       enable coverage profiling instrumentation
-                          [default=disabled]
-  --disable-doc           Disable documentation build [default=enabled]
-  --disable-gnutls        disable gnutls eet support
-  --disable-new-gnutls-api
-                          enable use of gnutls_x509_crt_verify_hash.
-                          [[default=enable]]
-
-Optional Packages:
-  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
-  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
-  --with-pic              try to use only PIC/non-PIC objects [default=use
-                          both]
-  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]
-  --with-doxygen=FILE     doxygen program to use [default=doxygen]
-  --with-libgcrypt-prefix=PFX       Prefix where libgcrypt is installed (optional)
-  --with-libgcrypt-exec-prefix=PFX  Exec prefix where libgcrypt is installed (optional)
-
-Some influential environment variables:
-  CC          C compiler command
-  CFLAGS      C compiler flags
-  LDFLAGS     linker flags, e.g. -L<lib dir> if you have libraries in a
-              nonstandard directory <lib dir>
-  LIBS        libraries to pass to the linker, e.g. -l<library>
-  CPPFLAGS    (Objective) C/C++ preprocessor flags, e.g. -I<include dir> if
-              you have headers in a nonstandard directory <include dir>
-  CPP         C preprocessor
-  PKG_CONFIG  path to pkg-config utility
-  PKG_CONFIG_PATH
-              directories to add to pkg-config's search path
-  PKG_CONFIG_LIBDIR
-              path overriding pkg-config's built-in search path
-  CHECK_CFLAGS
-              C compiler flags for CHECK, overriding pkg-config
-  CHECK_LIBS  linker flags for CHECK, overriding pkg-config
-  EVIL_CFLAGS C compiler flags for EVIL, overriding pkg-config
-  EVIL_LIBS   linker flags for EVIL, overriding pkg-config
-  EINA_CFLAGS C compiler flags for EINA, overriding pkg-config
-  EINA_LIBS   linker flags for EINA, overriding pkg-config
-  EXOTIC_CFLAGS
-              C compiler flags for EXOTIC, overriding pkg-config
-  EXOTIC_LIBS linker flags for EXOTIC, overriding pkg-config
-  GNUTLS_CFLAGS
-              C compiler flags for GNUTLS, overriding pkg-config
-  GNUTLS_LIBS linker flags for GNUTLS, overriding pkg-config
-  OPENSSL_CFLAGS
-              C compiler flags for OPENSSL, overriding pkg-config
-  OPENSSL_LIBS
-              linker flags for OPENSSL, overriding pkg-config
-
-Use these variables to override the choices made by `configure' or to help
-it to find libraries and programs with nonstandard names/locations.
-
-Report bugs to <enlightenment-devel@lists.sourceforge.net>.
-_ACEOF
-ac_status=$?
-fi
-
-if test "$ac_init_help" = "recursive"; then
-  # If there are subdirs, report their specific --help.
-  for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
-    test -d "$ac_dir" ||
-      { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } ||
-      continue
-    ac_builddir=.
-
-case "$ac_dir" in
-.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
-*)
-  ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
-  # A ".." for each directory in $ac_dir_suffix.
-  ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
-  case $ac_top_builddir_sub in
-  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
-  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
-  esac ;;
-esac
-ac_abs_top_builddir=$ac_pwd
-ac_abs_builddir=$ac_pwd$ac_dir_suffix
-# for backward compatibility:
-ac_top_builddir=$ac_top_build_prefix
-
-case $srcdir in
-  .)  # We are building in place.
-    ac_srcdir=.
-    ac_top_srcdir=$ac_top_builddir_sub
-    ac_abs_top_srcdir=$ac_pwd ;;
-  [\\/]* | ?:[\\/]* )  # Absolute name.
-    ac_srcdir=$srcdir$ac_dir_suffix;
-    ac_top_srcdir=$srcdir
-    ac_abs_top_srcdir=$srcdir ;;
-  *) # Relative name.
-    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
-    ac_top_srcdir=$ac_top_build_prefix$srcdir
-    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
-esac
-ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
-
-    cd "$ac_dir" || { ac_status=$?; continue; }
-    # Check for guested configure.
-    if test -f "$ac_srcdir/configure.gnu"; then
-      echo &&
-      $SHELL "$ac_srcdir/configure.gnu" --help=recursive
-    elif test -f "$ac_srcdir/configure"; then
-      echo &&
-      $SHELL "$ac_srcdir/configure" --help=recursive
-    else
-      $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
-    fi || ac_status=$?
-    cd "$ac_pwd" || { ac_status=$?; break; }
-  done
-fi
-
-test -n "$ac_init_help" && exit $ac_status
-if $ac_init_version; then
-  cat <<\_ACEOF
-eet configure 1.6.0-alpha
-generated by GNU Autoconf 2.67
-
-Copyright (C) 2010 Free Software Foundation, Inc.
-This configure script is free software; the Free Software Foundation
-gives unlimited permission to copy, distribute and modify it.
-_ACEOF
-  exit
-fi
-
-## ------------------------ ##
-## Autoconf initialization. ##
-## ------------------------ ##
-
-# ac_fn_c_try_compile LINENO
-# --------------------------
-# Try to compile conftest.$ac_ext, and return whether this succeeded.
-ac_fn_c_try_compile ()
-{
-  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
-  rm -f conftest.$ac_objext
-  if { { ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
-  (eval "$ac_compile") 2>conftest.err
-  ac_status=$?
-  if test -s conftest.err; then
-    grep -v '^ *+' conftest.err >conftest.er1
-    cat conftest.er1 >&5
-    mv -f conftest.er1 conftest.err
-  fi
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; } && {
-         test -z "$ac_c_werror_flag" ||
-         test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then :
-  ac_retval=0
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-        ac_retval=1
-fi
-  eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
-  as_fn_set_status $ac_retval
-
-} # ac_fn_c_try_compile
-
-# ac_fn_c_try_link LINENO
-# -----------------------
-# Try to link conftest.$ac_ext, and return whether this succeeded.
-ac_fn_c_try_link ()
-{
-  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
-  rm -f conftest.$ac_objext conftest$ac_exeext
-  if { { ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
-  (eval "$ac_link") 2>conftest.err
-  ac_status=$?
-  if test -s conftest.err; then
-    grep -v '^ *+' conftest.err >conftest.er1
-    cat conftest.er1 >&5
-    mv -f conftest.er1 conftest.err
-  fi
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; } && {
-         test -z "$ac_c_werror_flag" ||
-         test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-         test "$cross_compiling" = yes ||
-         $as_test_x conftest$ac_exeext
-       }; then :
-  ac_retval=0
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-        ac_retval=1
-fi
-  # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information
-  # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would
-  # interfere with the next link command; also delete a directory that is
-  # left behind by Apple's compiler.  We do this before executing the actions.
-  rm -rf conftest.dSYM conftest_ipa8_conftest.oo
-  eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
-  as_fn_set_status $ac_retval
-
-} # ac_fn_c_try_link
-
-# ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES
-# -------------------------------------------------------
-# Tests whether HEADER exists and can be compiled using the include files in
-# INCLUDES, setting the cache variable VAR accordingly.
-ac_fn_c_check_header_compile ()
-{
-  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
-  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
-$as_echo_n "checking for $2... " >&6; }
-if eval "test \"\${$3+set}\"" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-$4
-#include <$2>
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-  eval "$3=yes"
-else
-  eval "$3=no"
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-eval ac_res=\$$3
-               { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
-  eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
-
-} # ac_fn_c_check_header_compile
-
-# ac_fn_c_try_cpp LINENO
-# ----------------------
-# Try to preprocess conftest.$ac_ext, and return whether this succeeded.
-ac_fn_c_try_cpp ()
-{
-  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
-  if { { ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
-  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err
-  ac_status=$?
-  if test -s conftest.err; then
-    grep -v '^ *+' conftest.err >conftest.er1
-    cat conftest.er1 >&5
-    mv -f conftest.er1 conftest.err
-  fi
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; } > conftest.i && {
-         test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
-         test ! -s conftest.err
-       }; then :
-  ac_retval=0
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-    ac_retval=1
-fi
-  eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
-  as_fn_set_status $ac_retval
-
-} # ac_fn_c_try_cpp
-
-# ac_fn_c_try_run LINENO
-# ----------------------
-# Try to link conftest.$ac_ext, and return whether this succeeded. Assumes
-# that executables *can* be run.
-ac_fn_c_try_run ()
-{
-  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
-  if { { ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
-  (eval "$ac_link") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; } && { ac_try='./conftest$ac_exeext'
-  { { case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; }; }; then :
-  ac_retval=0
-else
-  $as_echo "$as_me: program exited with status $ac_status" >&5
-       $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-       ac_retval=$ac_status
-fi
-  rm -rf conftest.dSYM conftest_ipa8_conftest.oo
-  eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
-  as_fn_set_status $ac_retval
-
-} # ac_fn_c_try_run
-
-# ac_fn_c_check_func LINENO FUNC VAR
-# ----------------------------------
-# Tests whether FUNC exists, setting the cache variable VAR accordingly
-ac_fn_c_check_func ()
-{
-  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
-  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
-$as_echo_n "checking for $2... " >&6; }
-if eval "test \"\${$3+set}\"" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-/* Define $2 to an innocuous variant, in case <limits.h> declares $2.
-   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
-#define $2 innocuous_$2
-
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char $2 (); below.
-    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-    <limits.h> exists even on freestanding compilers.  */
-
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-
-#undef $2
-
-/* Override any GCC internal prototype to avoid an error.
-   Use char because int might match the return type of a GCC
-   builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char $2 ();
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined __stub_$2 || defined __stub___$2
-choke me
-#endif
-
-int
-main ()
-{
-return $2 ();
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
-  eval "$3=yes"
-else
-  eval "$3=no"
-fi
-rm -f core conftest.err conftest.$ac_objext \
-    conftest$ac_exeext conftest.$ac_ext
-fi
-eval ac_res=\$$3
-               { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
-  eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
-
-} # ac_fn_c_check_func
-
-# ac_fn_c_check_header_mongrel LINENO HEADER VAR INCLUDES
-# -------------------------------------------------------
-# Tests whether HEADER exists, giving a warning if it cannot be compiled using
-# the include files in INCLUDES and setting the cache variable VAR
-# accordingly.
-ac_fn_c_check_header_mongrel ()
-{
-  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
-  if eval "test \"\${$3+set}\"" = set; then :
-  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
-$as_echo_n "checking for $2... " >&6; }
-if eval "test \"\${$3+set}\"" = set; then :
-  $as_echo_n "(cached) " >&6
-fi
-eval ac_res=\$$3
-               { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
-else
-  # Is the header compilable?
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 usability" >&5
-$as_echo_n "checking $2 usability... " >&6; }
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-$4
-#include <$2>
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-  ac_header_compiler=yes
-else
-  ac_header_compiler=no
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_compiler" >&5
-$as_echo "$ac_header_compiler" >&6; }
-
-# Is the header present?
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 presence" >&5
-$as_echo_n "checking $2 presence... " >&6; }
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-#include <$2>
-_ACEOF
-if ac_fn_c_try_cpp "$LINENO"; then :
-  ac_header_preproc=yes
-else
-  ac_header_preproc=no
-fi
-rm -f conftest.err conftest.i conftest.$ac_ext
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_preproc" >&5
-$as_echo "$ac_header_preproc" >&6; }
-
-# So?  What about this header?
-case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in #((
-  yes:no: )
-    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&5
-$as_echo "$as_me: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&2;}
-    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5
-$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;}
-    ;;
-  no:yes:* )
-    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: present but cannot be compiled" >&5
-$as_echo "$as_me: WARNING: $2: present but cannot be compiled" >&2;}
-    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2:     check for missing prerequisite headers?" >&5
-$as_echo "$as_me: WARNING: $2:     check for missing prerequisite headers?" >&2;}
-    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: see the Autoconf documentation" >&5
-$as_echo "$as_me: WARNING: $2: see the Autoconf documentation" >&2;}
-    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2:     section \"Present But Cannot Be Compiled\"" >&5
-$as_echo "$as_me: WARNING: $2:     section \"Present But Cannot Be Compiled\"" >&2;}
-    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5
-$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;}
-( $as_echo "## -------------------------------------------------------- ##
-## Report this to enlightenment-devel@lists.sourceforge.net ##
-## -------------------------------------------------------- ##"
-     ) | sed "s/^/$as_me: WARNING:     /" >&2
-    ;;
-esac
-  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
-$as_echo_n "checking for $2... " >&6; }
-if eval "test \"\${$3+set}\"" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  eval "$3=\$ac_header_compiler"
-fi
-eval ac_res=\$$3
-               { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
-fi
-  eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
-
-} # ac_fn_c_check_header_mongrel
-cat >config.log <<_ACEOF
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-
-It was created by eet $as_me 1.6.0-alpha, which was
-generated by GNU Autoconf 2.67.  Invocation command line was
-
-  $ $0 $@
-
-_ACEOF
-exec 5>>config.log
-{
-cat <<_ASUNAME
-## --------- ##
-## Platform. ##
-## --------- ##
-
-hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
-uname -m = `(uname -m) 2>/dev/null || echo unknown`
-uname -r = `(uname -r) 2>/dev/null || echo unknown`
-uname -s = `(uname -s) 2>/dev/null || echo unknown`
-uname -v = `(uname -v) 2>/dev/null || echo unknown`
-
-/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
-/bin/uname -X     = `(/bin/uname -X) 2>/dev/null     || echo unknown`
-
-/bin/arch              = `(/bin/arch) 2>/dev/null              || echo unknown`
-/usr/bin/arch -k       = `(/usr/bin/arch -k) 2>/dev/null       || echo unknown`
-/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
-/usr/bin/hostinfo      = `(/usr/bin/hostinfo) 2>/dev/null      || echo unknown`
-/bin/machine           = `(/bin/machine) 2>/dev/null           || echo unknown`
-/usr/bin/oslevel       = `(/usr/bin/oslevel) 2>/dev/null       || echo unknown`
-/bin/universe          = `(/bin/universe) 2>/dev/null          || echo unknown`
-
-_ASUNAME
-
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    $as_echo "PATH: $as_dir"
-  done
-IFS=$as_save_IFS
-
-} >&5
-
-cat >&5 <<_ACEOF
-
-
-## ----------- ##
-## Core tests. ##
-## ----------- ##
-
-_ACEOF
-
-
-# Keep a trace of the command line.
-# Strip out --no-create and --no-recursion so they do not pile up.
-# Strip out --silent because we don't want to record it for future runs.
-# Also quote any args containing shell meta-characters.
-# Make two passes to allow for proper duplicate-argument suppression.
-ac_configure_args=
-ac_configure_args0=
-ac_configure_args1=
-ac_must_keep_next=false
-for ac_pass in 1 2
-do
-  for ac_arg
-  do
-    case $ac_arg in
-    -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
-    -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-    | -silent | --silent | --silen | --sile | --sil)
-      continue ;;
-    *\'*)
-      ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
-    esac
-    case $ac_pass in
-    1) as_fn_append ac_configure_args0 " '$ac_arg'" ;;
-    2)
-      as_fn_append ac_configure_args1 " '$ac_arg'"
-      if test $ac_must_keep_next = true; then
-        ac_must_keep_next=false # Got value, back to normal.
-      else
-        case $ac_arg in
-          *=* | --config-cache | -C | -disable-* | --disable-* \
-          | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
-          | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
-          | -with-* | --with-* | -without-* | --without-* | --x)
-            case "$ac_configure_args0 " in
-              "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
-            esac
-            ;;
-          -* ) ac_must_keep_next=true ;;
-        esac
-      fi
-      as_fn_append ac_configure_args " '$ac_arg'"
-      ;;
-    esac
-  done
-done
-{ ac_configure_args0=; unset ac_configure_args0;}
-{ ac_configure_args1=; unset ac_configure_args1;}
-
-# When interrupted or exit'd, cleanup temporary files, and complete
-# config.log.  We remove comments because anyway the quotes in there
-# would cause problems or look ugly.
-# WARNING: Use '\'' to represent an apostrophe within the trap.
-# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.
-trap 'exit_status=$?
-  # Save into config.log some information that might help in debugging.
-  {
-    echo
-
-    $as_echo "## ---------------- ##
-## Cache variables. ##
-## ---------------- ##"
-    echo
-    # The following way of writing the cache mishandles newlines in values,
-(
-  for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do
-    eval ac_val=\$$ac_var
-    case $ac_val in #(
-    *${as_nl}*)
-      case $ac_var in #(
-      *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
-$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
-      esac
-      case $ac_var in #(
-      _ | IFS | as_nl) ;; #(
-      BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
-      *) { eval $ac_var=; unset $ac_var;} ;;
-      esac ;;
-    esac
-  done
-  (set) 2>&1 |
-    case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #(
-    *${as_nl}ac_space=\ *)
-      sed -n \
-        "s/'\''/'\''\\\\'\'''\''/g;
-          s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p"
-      ;; #(
-    *)
-      sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
-      ;;
-    esac |
-    sort
-)
-    echo
-
-    $as_echo "## ----------------- ##
-## Output variables. ##
-## ----------------- ##"
-    echo
-    for ac_var in $ac_subst_vars
-    do
-      eval ac_val=\$$ac_var
-      case $ac_val in
-      *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
-      esac
-      $as_echo "$ac_var='\''$ac_val'\''"
-    done | sort
-    echo
-
-    if test -n "$ac_subst_files"; then
-      $as_echo "## ------------------- ##
-## File substitutions. ##
-## ------------------- ##"
-      echo
-      for ac_var in $ac_subst_files
-      do
-        eval ac_val=\$$ac_var
-        case $ac_val in
-        *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
-        esac
-        $as_echo "$ac_var='\''$ac_val'\''"
-      done | sort
-      echo
-    fi
-
-    if test -s confdefs.h; then
-      $as_echo "## ----------- ##
-## confdefs.h. ##
-## ----------- ##"
-      echo
-      cat confdefs.h
-      echo
-    fi
-    test "$ac_signal" != 0 &&
-      $as_echo "$as_me: caught signal $ac_signal"
-    $as_echo "$as_me: exit $exit_status"
-  } >&5
-  rm -f core *.core core.conftest.* &&
-    rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
-    exit $exit_status
-' 0
-for ac_signal in 1 2 13 15; do
-  trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal
-done
-ac_signal=0
-
-# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -f -r conftest* confdefs.h
-
-$as_echo "/* confdefs.h */" > confdefs.h
-
-# Predefined preprocessor variables.
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_NAME "$PACKAGE_NAME"
-_ACEOF
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
-_ACEOF
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_VERSION "$PACKAGE_VERSION"
-_ACEOF
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_STRING "$PACKAGE_STRING"
-_ACEOF
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
-_ACEOF
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_URL "$PACKAGE_URL"
-_ACEOF
-
-
-# Let the site file select an alternate cache file if it wants to.
-# Prefer an explicitly selected file to automatically selected ones.
-ac_site_file1=NONE
-ac_site_file2=NONE
-if test -n "$CONFIG_SITE"; then
-  # We do not want a PATH search for config.site.
-  case $CONFIG_SITE in #((
-    -*)  ac_site_file1=./$CONFIG_SITE;;
-    */*) ac_site_file1=$CONFIG_SITE;;
-    *)   ac_site_file1=./$CONFIG_SITE;;
-  esac
-elif test "x$prefix" != xNONE; then
-  ac_site_file1=$prefix/share/config.site
-  ac_site_file2=$prefix/etc/config.site
-else
-  ac_site_file1=$ac_default_prefix/share/config.site
-  ac_site_file2=$ac_default_prefix/etc/config.site
-fi
-for ac_site_file in "$ac_site_file1" "$ac_site_file2"
-do
-  test "x$ac_site_file" = xNONE && continue
-  if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then
-    { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5
-$as_echo "$as_me: loading site script $ac_site_file" >&6;}
-    sed 's/^/| /' "$ac_site_file" >&5
-    . "$ac_site_file" \
-      || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error $? "failed to load site script $ac_site_file
-See \`config.log' for more details" "$LINENO" 5 ; }
-  fi
-done
-
-if test -r "$cache_file"; then
-  # Some versions of bash will fail to source /dev/null (special files
-  # actually), so we avoid doing that.  DJGPP emulates it as a regular file.
-  if test /dev/null != "$cache_file" && test -f "$cache_file"; then
-    { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5
-$as_echo "$as_me: loading cache $cache_file" >&6;}
-    case $cache_file in
-      [\\/]* | ?:[\\/]* ) . "$cache_file";;
-      *)                      . "./$cache_file";;
-    esac
-  fi
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5
-$as_echo "$as_me: creating cache $cache_file" >&6;}
-  >$cache_file
-fi
-
-# Check that the precious variables saved in the cache have kept the same
-# value.
-ac_cache_corrupted=false
-for ac_var in $ac_precious_vars; do
-  eval ac_old_set=\$ac_cv_env_${ac_var}_set
-  eval ac_new_set=\$ac_env_${ac_var}_set
-  eval ac_old_val=\$ac_cv_env_${ac_var}_value
-  eval ac_new_val=\$ac_env_${ac_var}_value
-  case $ac_old_set,$ac_new_set in
-    set,)
-      { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
-$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
-      ac_cache_corrupted=: ;;
-    ,set)
-      { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5
-$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
-      ac_cache_corrupted=: ;;
-    ,);;
-    *)
-      if test "x$ac_old_val" != "x$ac_new_val"; then
-        # differences in whitespace do not lead to failure.
-        ac_old_val_w=`echo x $ac_old_val`
-        ac_new_val_w=`echo x $ac_new_val`
-        if test "$ac_old_val_w" != "$ac_new_val_w"; then
-          { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5
-$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
-          ac_cache_corrupted=:
-        else
-          { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5
-$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;}
-          eval $ac_var=\$ac_old_val
-        fi
-        { $as_echo "$as_me:${as_lineno-$LINENO}:   former value:  \`$ac_old_val'" >&5
-$as_echo "$as_me:   former value:  \`$ac_old_val'" >&2;}
-        { $as_echo "$as_me:${as_lineno-$LINENO}:   current value: \`$ac_new_val'" >&5
-$as_echo "$as_me:   current value: \`$ac_new_val'" >&2;}
-      fi;;
-  esac
-  # Pass precious variables to config.status.
-  if test "$ac_new_set" = set; then
-    case $ac_new_val in
-    *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
-    *) ac_arg=$ac_var=$ac_new_val ;;
-    esac
-    case " $ac_configure_args " in
-      *" '$ac_arg' "*) ;; # Avoid dups.  Use of quotes ensures accuracy.
-      *) as_fn_append ac_configure_args " '$ac_arg'" ;;
-    esac
-  fi
-done
-if $ac_cache_corrupted; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-  { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5
-$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;}
-  as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5
-fi
-## -------------------- ##
-## Main body of script. ##
-## -------------------- ##
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-
-
-
-
-ac_config_headers="$ac_config_headers config.h"
-
-
-
-
-am__api_version='1.11'
-
-ac_aux_dir=
-for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do
-  if test -f "$ac_dir/install-sh"; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install-sh -c"
-    break
-  elif test -f "$ac_dir/install.sh"; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install.sh -c"
-    break
-  elif test -f "$ac_dir/shtool"; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/shtool install -c"
-    break
-  fi
-done
-if test -z "$ac_aux_dir"; then
-  as_fn_error $? "cannot find install-sh, install.sh, or shtool in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" "$LINENO" 5
-fi
-
-# These three variables are undocumented and unsupported,
-# and are intended to be withdrawn in a future Autoconf release.
-# They can cause serious problems if a builder's source tree is in a directory
-# whose full name contains unusual characters.
-ac_config_guess="$SHELL $ac_aux_dir/config.guess"  # Please don't use this var.
-ac_config_sub="$SHELL $ac_aux_dir/config.sub"  # Please don't use this var.
-ac_configure="$SHELL $ac_aux_dir/configure"  # Please don't use this var.
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AmigaOS /C/install, which installs bootblocks on floppy discs
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# OS/2's system install, which has a completely different semantic
-# ./install, which can be erroneously created by make from ./install.sh.
-# Reject install programs that cannot install multiple files.
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5
-$as_echo_n "checking for a BSD-compatible install... " >&6; }
-if test -z "$INSTALL"; then
-if test "${ac_cv_path_install+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    # Account for people who put trailing slashes in PATH elements.
-case $as_dir/ in #((
-  ./ | .// | /[cC]/* | \
-  /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
-  ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \
-  /usr/ucb/* ) ;;
-  *)
-    # OSF1 and SCO ODT 3.0 have their own names for install.
-    # Don't use installbsd from OSF since it installs stuff as root
-    # by default.
-    for ac_prog in ginstall scoinst install; do
-      for ac_exec_ext in '' $ac_executable_extensions; do
-        if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then
-          if test $ac_prog = install &&
-            grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
-            # AIX install.  It has an incompatible calling convention.
-            :
-          elif test $ac_prog = install &&
-            grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
-            # program-specific install script used by HP pwplus--don't use.
-            :
-          else
-            rm -rf conftest.one conftest.two conftest.dir
-            echo one > conftest.one
-            echo two > conftest.two
-            mkdir conftest.dir
-            if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" &&
-              test -s conftest.one && test -s conftest.two &&
-              test -s conftest.dir/conftest.one &&
-              test -s conftest.dir/conftest.two
-            then
-              ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
-              break 3
-            fi
-          fi
-        fi
-      done
-    done
-    ;;
-esac
-
-  done
-IFS=$as_save_IFS
-
-rm -rf conftest.one conftest.two conftest.dir
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL=$ac_cv_path_install
-  else
-    # As a last resort, use the slow shell script.  Don't cache a
-    # value for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the value is a relative name.
-    INSTALL=$ac_install_sh
-  fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5
-$as_echo "$INSTALL" >&6; }
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5
-$as_echo_n "checking whether build environment is sane... " >&6; }
-# Just in case
-sleep 1
-echo timestamp > conftest.file
-# Reject unsafe characters in $srcdir or the absolute working directory
-# name.  Accept space and tab only in the latter.
-am_lf='
-'
-case `pwd` in
-  *[\\\"\#\$\&\'\`$am_lf]*)
-    as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5 ;;
-esac
-case $srcdir in
-  *[\\\"\#\$\&\'\`$am_lf\ \     ]*)
-    as_fn_error $? "unsafe srcdir value: \`$srcdir'" "$LINENO" 5 ;;
-esac
-
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
-   if test "$*" = "X"; then
-      # -L didn't work.
-      set X `ls -t "$srcdir/configure" conftest.file`
-   fi
-   rm -f conftest.file
-   if test "$*" != "X $srcdir/configure conftest.file" \
-      && test "$*" != "X conftest.file $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      as_fn_error $? "ls -t appears to fail.  Make sure there is not a broken
-alias in your environment" "$LINENO" 5
-   fi
-
-   test "$2" = conftest.file
-   )
-then
-   # Ok.
-   :
-else
-   as_fn_error $? "newly created file is older than distributed files!
-Check your system clock" "$LINENO" 5
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-test "$program_prefix" != NONE &&
-  program_transform_name="s&^&$program_prefix&;$program_transform_name"
-# Use a double $ so make ignores it.
-test "$program_suffix" != NONE &&
-  program_transform_name="s&\$&$program_suffix&;$program_transform_name"
-# Double any \ or $.
-# By default was `s,x,x', remove it if useless.
-ac_script='s/[\\$]/&&/g;s/;s,x,x,$//'
-program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"`
-
-# expand $ac_aux_dir to an absolute path
-am_aux_dir=`cd $ac_aux_dir && pwd`
-
-if test x"${MISSING+set}" != xset; then
-  case $am_aux_dir in
-  *\ * | *\     *)
-    MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
-  *)
-    MISSING="\${SHELL} $am_aux_dir/missing" ;;
-  esac
-fi
-# Use eval to expand $SHELL
-if eval "$MISSING --run true"; then
-  am_missing_run="$MISSING --run "
-else
-  am_missing_run=
-  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`missing' script is too old or missing" >&5
-$as_echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;}
-fi
-
-if test x"${install_sh}" != xset; then
-  case $am_aux_dir in
-  *\ * | *\     *)
-    install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
-  *)
-    install_sh="\${SHELL} $am_aux_dir/install-sh"
-  esac
-fi
-
-# Installed binaries are usually stripped using `strip' when the user
-# run `make install-strip'.  However `strip' might not be the right
-# tool to use in cross-compilation environments, therefore Automake
-# will honor the `STRIP' environment variable to overrule this program.
-if test "$cross_compiling" != no; then
-  if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
-set dummy ${ac_tool_prefix}strip; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_STRIP+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$STRIP"; then
-  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_STRIP="${ac_tool_prefix}strip"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-STRIP=$ac_cv_prog_STRIP
-if test -n "$STRIP"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5
-$as_echo "$STRIP" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_STRIP"; then
-  ac_ct_STRIP=$STRIP
-  # Extract the first word of "strip", so it can be a program name with args.
-set dummy strip; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$ac_ct_STRIP"; then
-  ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_ac_ct_STRIP="strip"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
-if test -n "$ac_ct_STRIP"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5
-$as_echo "$ac_ct_STRIP" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-  if test "x$ac_ct_STRIP" = x; then
-    STRIP=":"
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
-    STRIP=$ac_ct_STRIP
-  fi
-else
-  STRIP="$ac_cv_prog_STRIP"
-fi
-
-fi
-INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5
-$as_echo_n "checking for a thread-safe mkdir -p... " >&6; }
-if test -z "$MKDIR_P"; then
-  if test "${ac_cv_path_mkdir+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_prog in mkdir gmkdir; do
-         for ac_exec_ext in '' $ac_executable_extensions; do
-           { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; } || continue
-           case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #(
-             'mkdir (GNU coreutils) '* | \
-             'mkdir (coreutils) '* | \
-             'mkdir (fileutils) '4.1*)
-               ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext
-               break 3;;
-           esac
-         done
-       done
-  done
-IFS=$as_save_IFS
-
-fi
-
-  test -d ./--version && rmdir ./--version
-  if test "${ac_cv_path_mkdir+set}" = set; then
-    MKDIR_P="$ac_cv_path_mkdir -p"
-  else
-    # As a last resort, use the slow shell script.  Don't cache a
-    # value for MKDIR_P within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the value is a relative name.
-    MKDIR_P="$ac_install_sh -d"
-  fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5
-$as_echo "$MKDIR_P" >&6; }
-
-mkdir_p="$MKDIR_P"
-case $mkdir_p in
-  [\\/$]* | ?:[\\/]*) ;;
-  */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
-esac
-
-for ac_prog in gawk mawk nawk awk
-do
-  # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_AWK+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$AWK"; then
-  ac_cv_prog_AWK="$AWK" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_AWK="$ac_prog"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-AWK=$ac_cv_prog_AWK
-if test -n "$AWK"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5
-$as_echo "$AWK" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-  test -n "$AWK" && break
-done
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5
-$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; }
-set x ${MAKE-make}
-ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
-if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\"" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  cat >conftest.make <<\_ACEOF
-SHELL = /bin/sh
-all:
-        @echo '@@@%%%=$(MAKE)=@@@%%%'
-_ACEOF
-# GNU make sometimes prints "make[1]: Entering ...", which would confuse us.
-case `${MAKE-make} -f conftest.make 2>/dev/null` in
-  *@@@%%%=?*=@@@%%%*)
-    eval ac_cv_prog_make_${ac_make}_set=yes;;
-  *)
-    eval ac_cv_prog_make_${ac_make}_set=no;;
-esac
-rm -f conftest.make
-fi
-if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-  SET_MAKE=
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-  SET_MAKE="MAKE=${MAKE-make}"
-fi
-
-rm -rf .tst 2>/dev/null
-mkdir .tst 2>/dev/null
-if test -d .tst; then
-  am__leading_dot=.
-else
-  am__leading_dot=_
-fi
-rmdir .tst 2>/dev/null
-
-if test "`cd $srcdir && pwd`" != "`pwd`"; then
-  # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
-  # is not polluted with repeated "-I."
-  am__isrc=' -I$(srcdir)'
-  # test to see if srcdir already configured
-  if test -f $srcdir/config.status; then
-    as_fn_error $? "source directory already configured; run \"make distclean\" there first" "$LINENO" 5
-  fi
-fi
-
-# test whether we have cygpath
-if test -z "$CYGPATH_W"; then
-  if (cygpath --version) >/dev/null 2>/dev/null; then
-    CYGPATH_W='cygpath -w'
-  else
-    CYGPATH_W=echo
-  fi
-fi
-
-
-# Define the identity of the package.
- PACKAGE='eet'
- VERSION='1.6.0-alpha'
-
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE "$PACKAGE"
-_ACEOF
-
-
-cat >>confdefs.h <<_ACEOF
-#define VERSION "$VERSION"
-_ACEOF
-
-# Some tools Automake needs.
-
-ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"}
-
-
-AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"}
-
-
-AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"}
-
-
-AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"}
-
-
-MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
-
-# We need awk for the "check" target.  The system "awk" is bad on
-# some platforms.
-# Always define AMTAR for backward compatibility.
-
-AMTAR=${AMTAR-"${am_missing_run}tar"}
-
-am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'
-
-
-
-
-
-# Check whether --enable-silent-rules was given.
-if test "${enable_silent_rules+set}" = set; then :
-  enableval=$enable_silent_rules;
-fi
-
-case $enable_silent_rules in
-yes) AM_DEFAULT_VERBOSITY=0;;
-no)  AM_DEFAULT_VERBOSITY=1;;
-*)   AM_DEFAULT_VERBOSITY=0;;
-esac
-AM_BACKSLASH='\'
-
-
-# Make sure we can run config.sub.
-$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
-  as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5
-$as_echo_n "checking build system type... " >&6; }
-if test "${ac_cv_build+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  ac_build_alias=$build_alias
-test "x$ac_build_alias" = x &&
-  ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
-test "x$ac_build_alias" = x &&
-  as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5
-ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
-  as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5
-$as_echo "$ac_cv_build" >&6; }
-case $ac_cv_build in
-*-*-*) ;;
-*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5 ;;
-esac
-build=$ac_cv_build
-ac_save_IFS=$IFS; IFS='-'
-set x $ac_cv_build
-shift
-build_cpu=$1
-build_vendor=$2
-shift; shift
-# Remember, the first character of IFS is used to create $*,
-# except with old shells:
-build_os=$*
-IFS=$ac_save_IFS
-case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5
-$as_echo_n "checking host system type... " >&6; }
-if test "${ac_cv_host+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test "x$host_alias" = x; then
-  ac_cv_host=$ac_cv_build
-else
-  ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` ||
-    as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5
-fi
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5
-$as_echo "$ac_cv_host" >&6; }
-case $ac_cv_host in
-*-*-*) ;;
-*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5 ;;
-esac
-host=$ac_cv_host
-ac_save_IFS=$IFS; IFS='-'
-set x $ac_cv_host
-shift
-host_cpu=$1
-host_vendor=$2
-shift; shift
-# Remember, the first character of IFS is used to create $*,
-# except with old shells:
-host_os=$*
-IFS=$ac_save_IFS
-case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac
-
-
-enable_win32_dll=yes
-
-case $host in
-*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-cegcc*)
-  if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
-set dummy ${ac_tool_prefix}as; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_AS+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$AS"; then
-  ac_cv_prog_AS="$AS" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_AS="${ac_tool_prefix}as"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-AS=$ac_cv_prog_AS
-if test -n "$AS"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AS" >&5
-$as_echo "$AS" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_AS"; then
-  ac_ct_AS=$AS
-  # Extract the first word of "as", so it can be a program name with args.
-set dummy as; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_AS+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$ac_ct_AS"; then
-  ac_cv_prog_ac_ct_AS="$ac_ct_AS" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_ac_ct_AS="as"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_AS=$ac_cv_prog_ac_ct_AS
-if test -n "$ac_ct_AS"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AS" >&5
-$as_echo "$ac_ct_AS" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-  if test "x$ac_ct_AS" = x; then
-    AS="false"
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
-    AS=$ac_ct_AS
-  fi
-else
-  AS="$ac_cv_prog_AS"
-fi
-
-  if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args.
-set dummy ${ac_tool_prefix}dlltool; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_DLLTOOL+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$DLLTOOL"; then
-  ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-DLLTOOL=$ac_cv_prog_DLLTOOL
-if test -n "$DLLTOOL"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DLLTOOL" >&5
-$as_echo "$DLLTOOL" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_DLLTOOL"; then
-  ac_ct_DLLTOOL=$DLLTOOL
-  # Extract the first word of "dlltool", so it can be a program name with args.
-set dummy dlltool; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_DLLTOOL+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$ac_ct_DLLTOOL"; then
-  ac_cv_prog_ac_ct_DLLTOOL="$ac_ct_DLLTOOL" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_ac_ct_DLLTOOL="dlltool"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL
-if test -n "$ac_ct_DLLTOOL"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DLLTOOL" >&5
-$as_echo "$ac_ct_DLLTOOL" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-  if test "x$ac_ct_DLLTOOL" = x; then
-    DLLTOOL="false"
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
-    DLLTOOL=$ac_ct_DLLTOOL
-  fi
-else
-  DLLTOOL="$ac_cv_prog_DLLTOOL"
-fi
-
-  if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args.
-set dummy ${ac_tool_prefix}objdump; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_OBJDUMP+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$OBJDUMP"; then
-  ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-OBJDUMP=$ac_cv_prog_OBJDUMP
-if test -n "$OBJDUMP"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJDUMP" >&5
-$as_echo "$OBJDUMP" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_OBJDUMP"; then
-  ac_ct_OBJDUMP=$OBJDUMP
-  # Extract the first word of "objdump", so it can be a program name with args.
-set dummy objdump; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_OBJDUMP+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$ac_ct_OBJDUMP"; then
-  ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_ac_ct_OBJDUMP="objdump"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP
-if test -n "$ac_ct_OBJDUMP"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJDUMP" >&5
-$as_echo "$ac_ct_OBJDUMP" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-  if test "x$ac_ct_OBJDUMP" = x; then
-    OBJDUMP="false"
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
-    OBJDUMP=$ac_ct_OBJDUMP
-  fi
-else
-  OBJDUMP="$ac_cv_prog_OBJDUMP"
-fi
-
-  ;;
-esac
-
-test -z "$AS" && AS=as
-
-
-
-
-
-test -z "$DLLTOOL" && DLLTOOL=dlltool
-
-
-
-
-
-test -z "$OBJDUMP" && OBJDUMP=objdump
-
-
-
-
-
-
-
-case `pwd` in
-  *\ * | *\     *)
-    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&5
-$as_echo "$as_me: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&2;} ;;
-esac
-
-
-
-macro_version='2.2.6b'
-macro_revision='1.3017'
-
-
-
-
-
-
-
-
-
-
-
-
-
-ltmain="$ac_aux_dir/ltmain.sh"
-
-DEPDIR="${am__leading_dot}deps"
-
-ac_config_commands="$ac_config_commands depfiles"
-
-
-am_make=${MAKE-make}
-cat > confinc << 'END'
-am__doit:
-        @echo this is the am__doit target
-.PHONY: am__doit
-END
-# If we don't find an include directive, just comment out the code.
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5
-$as_echo_n "checking for style of include used by $am_make... " >&6; }
-am__include="#"
-am__quote=
-_am_result=none
-# First try GNU make style include.
-echo "include confinc" > confmf
-# Ignore all kinds of additional output from `make'.
-case `$am_make -s -f confmf 2> /dev/null` in #(
-*the\ am__doit\ target*)
-  am__include=include
-  am__quote=
-  _am_result=GNU
-  ;;
-esac
-# Now try BSD make style include.
-if test "$am__include" = "#"; then
-   echo '.include "confinc"' > confmf
-   case `$am_make -s -f confmf 2> /dev/null` in #(
-   *the\ am__doit\ target*)
-     am__include=.include
-     am__quote="\""
-     _am_result=BSD
-     ;;
-   esac
-fi
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5
-$as_echo "$_am_result" >&6; }
-rm -f confinc confmf
-
-# Check whether --enable-dependency-tracking was given.
-if test "${enable_dependency_tracking+set}" = set; then :
-  enableval=$enable_dependency_tracking;
-fi
-
-if test "x$enable_dependency_tracking" != xno; then
-  am_depcomp="$ac_aux_dir/depcomp"
-  AMDEPBACKSLASH='\'
-fi
- if test "x$enable_dependency_tracking" != xno; then
-  AMDEP_TRUE=
-  AMDEP_FALSE='#'
-else
-  AMDEP_TRUE='#'
-  AMDEP_FALSE=
-fi
-
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
-set dummy ${ac_tool_prefix}gcc; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_CC+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_CC="${ac_tool_prefix}gcc"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
-$as_echo "$CC" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_CC"; then
-  ac_ct_CC=$CC
-  # Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_CC+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$ac_ct_CC"; then
-  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_ac_ct_CC="gcc"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_CC=$ac_cv_prog_ac_ct_CC
-if test -n "$ac_ct_CC"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
-$as_echo "$ac_ct_CC" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-  if test "x$ac_ct_CC" = x; then
-    CC=""
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
-    CC=$ac_ct_CC
-  fi
-else
-  CC="$ac_cv_prog_CC"
-fi
-
-if test -z "$CC"; then
-          if test -n "$ac_tool_prefix"; then
-    # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
-set dummy ${ac_tool_prefix}cc; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_CC+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_CC="${ac_tool_prefix}cc"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
-$as_echo "$CC" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-  fi
-fi
-if test -z "$CC"; then
-  # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_CC+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  ac_prog_rejected=no
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
-       ac_prog_rejected=yes
-       continue
-     fi
-    ac_cv_prog_CC="cc"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-if test $ac_prog_rejected = yes; then
-  # We found a bogon in the path, so make sure we never use it.
-  set dummy $ac_cv_prog_CC
-  shift
-  if test $# != 0; then
-    # We chose a different compiler from the bogus one.
-    # However, it has the same basename, so the bogon will be chosen
-    # first if we set CC to just the basename; use the full file name.
-    shift
-    ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
-  fi
-fi
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
-$as_echo "$CC" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$CC"; then
-  if test -n "$ac_tool_prefix"; then
-  for ac_prog in cl.exe
-  do
-    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
-set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_CC+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
-$as_echo "$CC" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-    test -n "$CC" && break
-  done
-fi
-if test -z "$CC"; then
-  ac_ct_CC=$CC
-  for ac_prog in cl.exe
-do
-  # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_CC+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$ac_ct_CC"; then
-  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_ac_ct_CC="$ac_prog"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_CC=$ac_cv_prog_ac_ct_CC
-if test -n "$ac_ct_CC"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
-$as_echo "$ac_ct_CC" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-  test -n "$ac_ct_CC" && break
-done
-
-  if test "x$ac_ct_CC" = x; then
-    CC=""
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
-    CC=$ac_ct_CC
-  fi
-fi
-
-fi
-
-
-test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error $? "no acceptable C compiler found in \$PATH
-See \`config.log' for more details" "$LINENO" 5 ; }
-
-# Provide some information about the compiler.
-$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5
-set X $ac_compile
-ac_compiler=$2
-for ac_option in --version -v -V -qversion; do
-  { { ac_try="$ac_compiler $ac_option >&5"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
-  (eval "$ac_compiler $ac_option >&5") 2>conftest.err
-  ac_status=$?
-  if test -s conftest.err; then
-    sed '10a\
-... rest of stderr output deleted ...
-         10q' conftest.err >conftest.er1
-    cat conftest.er1 >&5
-  fi
-  rm -f conftest.er1 conftest.err
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; }
-done
-
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-ac_clean_files_save=$ac_clean_files
-ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out"
-# Try to create an executable without -o first, disregard a.out.
-# It will help us diagnose broken compilers, and finding out an intuition
-# of exeext.
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5
-$as_echo_n "checking whether the C compiler works... " >&6; }
-ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
-
-# The possible output files:
-ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*"
-
-ac_rmfiles=
-for ac_file in $ac_files
-do
-  case $ac_file in
-    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
-    * ) ac_rmfiles="$ac_rmfiles $ac_file";;
-  esac
-done
-rm -f $ac_rmfiles
-
-if { { ac_try="$ac_link_default"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
-  (eval "$ac_link_default") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; }; then :
-  # Autoconf-2.13 could set the ac_cv_exeext variable to `no'.
-# So ignore a value of `no', otherwise this would lead to `EXEEXT = no'
-# in a Makefile.  We should not override ac_cv_exeext if it was cached,
-# so that the user can short-circuit this test for compilers unknown to
-# Autoconf.
-for ac_file in $ac_files ''
-do
-  test -f "$ac_file" || continue
-  case $ac_file in
-    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj )
-        ;;
-    [ab].out )
-        # We found the default executable, but exeext='' is most
-        # certainly right.
-        break;;
-    *.* )
-        if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no;
-        then :; else
-           ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
-        fi
-        # We set ac_cv_exeext here because the later test for it is not
-        # safe: cross compilers may not add the suffix if given an `-o'
-        # argument, so we may need to know it at that point already.
-        # Even if this section looks crufty: it has the advantage of
-        # actually working.
-        break;;
-    * )
-        break;;
-  esac
-done
-test "$ac_cv_exeext" = no && ac_cv_exeext=
-
-else
-  ac_file=''
-fi
-if test -z "$ac_file"; then :
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-$as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error 77 "C compiler cannot create executables
-See \`config.log' for more details" "$LINENO" 5 ; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5
-$as_echo_n "checking for C compiler default output file name... " >&6; }
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5
-$as_echo "$ac_file" >&6; }
-ac_exeext=$ac_cv_exeext
-
-rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out
-ac_clean_files=$ac_clean_files_save
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5
-$as_echo_n "checking for suffix of executables... " >&6; }
-if { { ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
-  (eval "$ac_link") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; }; then :
-  # If both `conftest.exe' and `conftest' are `present' (well, observable)
-# catch `conftest.exe'.  For instance with Cygwin, `ls conftest' will
-# work properly (i.e., refer to `conftest.exe'), while it won't with
-# `rm'.
-for ac_file in conftest.exe conftest conftest.*; do
-  test -f "$ac_file" || continue
-  case $ac_file in
-    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
-    *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
-          break;;
-    * ) break;;
-  esac
-done
-else
-  { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error $? "cannot compute suffix of executables: cannot compile and link
-See \`config.log' for more details" "$LINENO" 5 ; }
-fi
-rm -f conftest conftest$ac_cv_exeext
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5
-$as_echo "$ac_cv_exeext" >&6; }
-
-rm -f conftest.$ac_ext
-EXEEXT=$ac_cv_exeext
-ac_exeext=$EXEEXT
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-#include <stdio.h>
-int
-main ()
-{
-FILE *f = fopen ("conftest.out", "w");
- return ferror (f) || fclose (f) != 0;
-
-  ;
-  return 0;
-}
-_ACEOF
-ac_clean_files="$ac_clean_files conftest.out"
-# Check that the compiler produces executables we can run.  If not, either
-# the compiler is broken, or we cross compile.
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5
-$as_echo_n "checking whether we are cross compiling... " >&6; }
-if test "$cross_compiling" != yes; then
-  { { ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
-  (eval "$ac_link") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; }
-  if { ac_try='./conftest$ac_cv_exeext'
-  { { case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; }; }; then
-    cross_compiling=no
-  else
-    if test "$cross_compiling" = maybe; then
-        cross_compiling=yes
-    else
-        { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error $? "cannot run C compiled programs.
-If you meant to cross compile, use \`--host'.
-See \`config.log' for more details" "$LINENO" 5 ; }
-    fi
-  fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5
-$as_echo "$cross_compiling" >&6; }
-
-rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out
-ac_clean_files=$ac_clean_files_save
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5
-$as_echo_n "checking for suffix of object files... " >&6; }
-if test "${ac_cv_objext+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.o conftest.obj
-if { { ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
-  (eval "$ac_compile") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; }; then :
-  for ac_file in conftest.o conftest.obj conftest.*; do
-  test -f "$ac_file" || continue;
-  case $ac_file in
-    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;;
-    *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
-       break;;
-  esac
-done
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error $? "cannot compute suffix of object files: cannot compile
-See \`config.log' for more details" "$LINENO" 5 ; }
-fi
-rm -f conftest.$ac_cv_objext conftest.$ac_ext
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5
-$as_echo "$ac_cv_objext" >&6; }
-OBJEXT=$ac_cv_objext
-ac_objext=$OBJEXT
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5
-$as_echo_n "checking whether we are using the GNU C compiler... " >&6; }
-if test "${ac_cv_c_compiler_gnu+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-int
-main ()
-{
-#ifndef __GNUC__
-       choke me
-#endif
-
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-  ac_compiler_gnu=yes
-else
-  ac_compiler_gnu=no
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-ac_cv_c_compiler_gnu=$ac_compiler_gnu
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5
-$as_echo "$ac_cv_c_compiler_gnu" >&6; }
-if test $ac_compiler_gnu = yes; then
-  GCC=yes
-else
-  GCC=
-fi
-ac_test_CFLAGS=${CFLAGS+set}
-ac_save_CFLAGS=$CFLAGS
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5
-$as_echo_n "checking whether $CC accepts -g... " >&6; }
-if test "${ac_cv_prog_cc_g+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  ac_save_c_werror_flag=$ac_c_werror_flag
-   ac_c_werror_flag=yes
-   ac_cv_prog_cc_g=no
-   CFLAGS="-g"
-   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-  ac_cv_prog_cc_g=yes
-else
-  CFLAGS=""
-      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-
-else
-  ac_c_werror_flag=$ac_save_c_werror_flag
-         CFLAGS="-g"
-         cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-  ac_cv_prog_cc_g=yes
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-   ac_c_werror_flag=$ac_save_c_werror_flag
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5
-$as_echo "$ac_cv_prog_cc_g" >&6; }
-if test "$ac_test_CFLAGS" = set; then
-  CFLAGS=$ac_save_CFLAGS
-elif test $ac_cv_prog_cc_g = yes; then
-  if test "$GCC" = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-g"
-  fi
-else
-  if test "$GCC" = yes; then
-    CFLAGS="-O2"
-  else
-    CFLAGS=
-  fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5
-$as_echo_n "checking for $CC option to accept ISO C89... " >&6; }
-if test "${ac_cv_prog_cc_c89+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  ac_cv_prog_cc_c89=no
-ac_save_CC=$CC
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-#include <stdarg.h>
-#include <stdio.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-/* Most of the following tests are stolen from RCS 5.7's src/conf.sh.  */
-struct buf { int x; };
-FILE * (*rcsopen) (struct buf *, struct stat *, int);
-static char *e (p, i)
-     char **p;
-     int i;
-{
-  return p[i];
-}
-static char *f (char * (*g) (char **, int), char **p, ...)
-{
-  char *s;
-  va_list v;
-  va_start (v,p);
-  s = g (p, va_arg (v,int));
-  va_end (v);
-  return s;
-}
-
-/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default.  It has
-   function prototypes and stuff, but not '\xHH' hex character constants.
-   These don't provoke an error unfortunately, instead are silently treated
-   as 'x'.  The following induces an error, until -std is added to get
-   proper ANSI mode.  Curiously '\x00'!='x' always comes out true, for an
-   array size at least.  It's necessary to write '\x00'==0 to get something
-   that's true only with -std.  */
-int osf4_cc_array ['\x00' == 0 ? 1 : -1];
-
-/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
-   inside strings and character constants.  */
-#define FOO(x) 'x'
-int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
-
-int test (int i, double x);
-struct s1 {int (*f) (int a);};
-struct s2 {int (*f) (double a);};
-int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
-int argc;
-char **argv;
-int
-main ()
-{
-return f (e, argv, 0) != argv[0]  ||  f (e, argv, 1) != argv[1];
-  ;
-  return 0;
-}
-_ACEOF
-for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \
-        -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
-do
-  CC="$ac_save_CC $ac_arg"
-  if ac_fn_c_try_compile "$LINENO"; then :
-  ac_cv_prog_cc_c89=$ac_arg
-fi
-rm -f core conftest.err conftest.$ac_objext
-  test "x$ac_cv_prog_cc_c89" != "xno" && break
-done
-rm -f conftest.$ac_ext
-CC=$ac_save_CC
-
-fi
-# AC_CACHE_VAL
-case "x$ac_cv_prog_cc_c89" in
-  x)
-    { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5
-$as_echo "none needed" >&6; } ;;
-  xno)
-    { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5
-$as_echo "unsupported" >&6; } ;;
-  *)
-    CC="$CC $ac_cv_prog_cc_c89"
-    { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5
-$as_echo "$ac_cv_prog_cc_c89" >&6; } ;;
-esac
-if test "x$ac_cv_prog_cc_c89" != xno; then :
-
-fi
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-depcc="$CC"   am_compiler_list=
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5
-$as_echo_n "checking dependency style of $depcc... " >&6; }
-if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
-  # We make a subdir and do the tests there.  Otherwise we can end up
-  # making bogus files that we don't know about and never remove.  For
-  # instance it was reported that on HP-UX the gcc test will end up
-  # making a dummy file named `D' -- because `-MD' means `put the output
-  # in D'.
-  mkdir conftest.dir
-  # Copy depcomp to subdir because otherwise we won't find it if we're
-  # using a relative directory.
-  cp "$am_depcomp" conftest.dir
-  cd conftest.dir
-  # We will build objects and dependencies in a subdirectory because
-  # it helps to detect inapplicable dependency modes.  For instance
-  # both Tru64's cc and ICC support -MD to output dependencies as a
-  # side effect of compilation, but ICC will put the dependencies in
-  # the current directory while Tru64 will put them in the object
-  # directory.
-  mkdir sub
-
-  am_cv_CC_dependencies_compiler_type=none
-  if test "$am_compiler_list" = ""; then
-     am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
-  fi
-  am__universal=false
-  case " $depcc " in #(
-     *\ -arch\ *\ -arch\ *) am__universal=true ;;
-     esac
-
-  for depmode in $am_compiler_list; do
-    # Setup a source with many dependencies, because some compilers
-    # like to wrap large dependency lists on column 80 (with \), and
-    # we should not choose a depcomp mode which is confused by this.
-    #
-    # We need to recreate these files for each test, as the compiler may
-    # overwrite some of them when testing with obscure command lines.
-    # This happens at least with the AIX C compiler.
-    : > sub/conftest.c
-    for i in 1 2 3 4 5 6; do
-      echo '#include "conftst'$i'.h"' >> sub/conftest.c
-      # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
-      # Solaris 8's {/usr,}/bin/sh.
-      touch sub/conftst$i.h
-    done
-    echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
-
-    # We check with `-c' and `-o' for the sake of the "dashmstdout"
-    # mode.  It turns out that the SunPro C++ compiler does not properly
-    # handle `-M -o', and we need to detect this.  Also, some Intel
-    # versions had trouble with output in subdirs
-    am__obj=sub/conftest.${OBJEXT-o}
-    am__minus_obj="-o $am__obj"
-    case $depmode in
-    gcc)
-      # This depmode causes a compiler race in universal mode.
-      test "$am__universal" = false || continue
-      ;;
-    nosideeffect)
-      # after this tag, mechanisms are not by side-effect, so they'll
-      # only be used when explicitly requested
-      if test "x$enable_dependency_tracking" = xyes; then
-        continue
-      else
-        break
-      fi
-      ;;
-    msvisualcpp | msvcmsys)
-      # This compiler won't grok `-c -o', but also, the minuso test has
-      # not run yet.  These depmodes are late enough in the game, and
-      # so weak that their functioning should not be impacted.
-      am__obj=conftest.${OBJEXT-o}
-      am__minus_obj=
-      ;;
-    none) break ;;
-    esac
-    if depmode=$depmode \
-       source=sub/conftest.c object=$am__obj \
-       depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
-       $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
-         >/dev/null 2>conftest.err &&
-       grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
-       grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
-       grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
-       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
-      # icc doesn't choke on unknown options, it will just issue warnings
-      # or remarks (even with -Werror).  So we grep stderr for any message
-      # that says an option was ignored or not supported.
-      # When given -MP, icc 7.0 and 7.1 complain thusly:
-      #   icc: Command line warning: ignoring option '-M'; no argument required
-      # The diagnosis changed in icc 8.0:
-      #   icc: Command line remark: option '-MP' not supported
-      if (grep 'ignoring option' conftest.err ||
-          grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
-        am_cv_CC_dependencies_compiler_type=$depmode
-        break
-      fi
-    fi
-  done
-
-  cd ..
-  rm -rf conftest.dir
-else
-  am_cv_CC_dependencies_compiler_type=none
-fi
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5
-$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; }
-CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
-
- if
-  test "x$enable_dependency_tracking" != xno \
-  && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then
-  am__fastdepCC_TRUE=
-  am__fastdepCC_FALSE='#'
-else
-  am__fastdepCC_TRUE='#'
-  am__fastdepCC_FALSE=
-fi
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5
-$as_echo_n "checking for a sed that does not truncate output... " >&6; }
-if test "${ac_cv_path_SED+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-            ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/
-     for ac_i in 1 2 3 4 5 6 7; do
-       ac_script="$ac_script$as_nl$ac_script"
-     done
-     echo "$ac_script" 2>/dev/null | sed 99q >conftest.sed
-     { ac_script=; unset ac_script;}
-     if test -z "$SED"; then
-  ac_path_SED_found=false
-  # Loop through the user's path and test for each of PROGNAME-LIST
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_prog in sed gsed; do
-    for ac_exec_ext in '' $ac_executable_extensions; do
-      ac_path_SED="$as_dir/$ac_prog$ac_exec_ext"
-      { test -f "$ac_path_SED" && $as_test_x "$ac_path_SED"; } || continue
-# Check for GNU ac_path_SED and select it if it is found.
-  # Check for GNU $ac_path_SED
-case `"$ac_path_SED" --version 2>&1` in
-*GNU*)
-  ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;;
-*)
-  ac_count=0
-  $as_echo_n 0123456789 >"conftest.in"
-  while :
-  do
-    cat "conftest.in" "conftest.in" >"conftest.tmp"
-    mv "conftest.tmp" "conftest.in"
-    cp "conftest.in" "conftest.nl"
-    $as_echo '' >> "conftest.nl"
-    "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break
-    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
-    as_fn_arith $ac_count + 1 && ac_count=$as_val
-    if test $ac_count -gt ${ac_path_SED_max-0}; then
-      # Best one so far, save it but keep looking for a better one
-      ac_cv_path_SED="$ac_path_SED"
-      ac_path_SED_max=$ac_count
-    fi
-    # 10*(2^10) chars as input seems more than enough
-    test $ac_count -gt 10 && break
-  done
-  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
-esac
-
-      $ac_path_SED_found && break 3
-    done
-  done
-  done
-IFS=$as_save_IFS
-  if test -z "$ac_cv_path_SED"; then
-    as_fn_error $? "no acceptable sed could be found in \$PATH" "$LINENO" 5
-  fi
-else
-  ac_cv_path_SED=$SED
-fi
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_SED" >&5
-$as_echo "$ac_cv_path_SED" >&6; }
- SED="$ac_cv_path_SED"
-  rm -f conftest.sed
-
-test -z "$SED" && SED=sed
-Xsed="$SED -e 1s/^X//"
-
-
-
-
-
-
-
-
-
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5
-$as_echo_n "checking for grep that handles long lines and -e... " >&6; }
-if test "${ac_cv_path_GREP+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -z "$GREP"; then
-  ac_path_GREP_found=false
-  # Loop through the user's path and test for each of PROGNAME-LIST
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_prog in grep ggrep; do
-    for ac_exec_ext in '' $ac_executable_extensions; do
-      ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"
-      { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue
-# Check for GNU ac_path_GREP and select it if it is found.
-  # Check for GNU $ac_path_GREP
-case `"$ac_path_GREP" --version 2>&1` in
-*GNU*)
-  ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;;
-*)
-  ac_count=0
-  $as_echo_n 0123456789 >"conftest.in"
-  while :
-  do
-    cat "conftest.in" "conftest.in" >"conftest.tmp"
-    mv "conftest.tmp" "conftest.in"
-    cp "conftest.in" "conftest.nl"
-    $as_echo 'GREP' >> "conftest.nl"
-    "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break
-    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
-    as_fn_arith $ac_count + 1 && ac_count=$as_val
-    if test $ac_count -gt ${ac_path_GREP_max-0}; then
-      # Best one so far, save it but keep looking for a better one
-      ac_cv_path_GREP="$ac_path_GREP"
-      ac_path_GREP_max=$ac_count
-    fi
-    # 10*(2^10) chars as input seems more than enough
-    test $ac_count -gt 10 && break
-  done
-  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
-esac
-
-      $ac_path_GREP_found && break 3
-    done
-  done
-  done
-IFS=$as_save_IFS
-  if test -z "$ac_cv_path_GREP"; then
-    as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
-  fi
-else
-  ac_cv_path_GREP=$GREP
-fi
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5
-$as_echo "$ac_cv_path_GREP" >&6; }
- GREP="$ac_cv_path_GREP"
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5
-$as_echo_n "checking for egrep... " >&6; }
-if test "${ac_cv_path_EGREP+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  if echo a | $GREP -E '(a|b)' >/dev/null 2>&1
-   then ac_cv_path_EGREP="$GREP -E"
-   else
-     if test -z "$EGREP"; then
-  ac_path_EGREP_found=false
-  # Loop through the user's path and test for each of PROGNAME-LIST
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_prog in egrep; do
-    for ac_exec_ext in '' $ac_executable_extensions; do
-      ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"
-      { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue
-# Check for GNU ac_path_EGREP and select it if it is found.
-  # Check for GNU $ac_path_EGREP
-case `"$ac_path_EGREP" --version 2>&1` in
-*GNU*)
-  ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;;
-*)
-  ac_count=0
-  $as_echo_n 0123456789 >"conftest.in"
-  while :
-  do
-    cat "conftest.in" "conftest.in" >"conftest.tmp"
-    mv "conftest.tmp" "conftest.in"
-    cp "conftest.in" "conftest.nl"
-    $as_echo 'EGREP' >> "conftest.nl"
-    "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break
-    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
-    as_fn_arith $ac_count + 1 && ac_count=$as_val
-    if test $ac_count -gt ${ac_path_EGREP_max-0}; then
-      # Best one so far, save it but keep looking for a better one
-      ac_cv_path_EGREP="$ac_path_EGREP"
-      ac_path_EGREP_max=$ac_count
-    fi
-    # 10*(2^10) chars as input seems more than enough
-    test $ac_count -gt 10 && break
-  done
-  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
-esac
-
-      $ac_path_EGREP_found && break 3
-    done
-  done
-  done
-IFS=$as_save_IFS
-  if test -z "$ac_cv_path_EGREP"; then
-    as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
-  fi
-else
-  ac_cv_path_EGREP=$EGREP
-fi
-
-   fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5
-$as_echo "$ac_cv_path_EGREP" >&6; }
- EGREP="$ac_cv_path_EGREP"
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for fgrep" >&5
-$as_echo_n "checking for fgrep... " >&6; }
-if test "${ac_cv_path_FGREP+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1
-   then ac_cv_path_FGREP="$GREP -F"
-   else
-     if test -z "$FGREP"; then
-  ac_path_FGREP_found=false
-  # Loop through the user's path and test for each of PROGNAME-LIST
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_prog in fgrep; do
-    for ac_exec_ext in '' $ac_executable_extensions; do
-      ac_path_FGREP="$as_dir/$ac_prog$ac_exec_ext"
-      { test -f "$ac_path_FGREP" && $as_test_x "$ac_path_FGREP"; } || continue
-# Check for GNU ac_path_FGREP and select it if it is found.
-  # Check for GNU $ac_path_FGREP
-case `"$ac_path_FGREP" --version 2>&1` in
-*GNU*)
-  ac_cv_path_FGREP="$ac_path_FGREP" ac_path_FGREP_found=:;;
-*)
-  ac_count=0
-  $as_echo_n 0123456789 >"conftest.in"
-  while :
-  do
-    cat "conftest.in" "conftest.in" >"conftest.tmp"
-    mv "conftest.tmp" "conftest.in"
-    cp "conftest.in" "conftest.nl"
-    $as_echo 'FGREP' >> "conftest.nl"
-    "$ac_path_FGREP" FGREP < "conftest.nl" >"conftest.out" 2>/dev/null || break
-    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
-    as_fn_arith $ac_count + 1 && ac_count=$as_val
-    if test $ac_count -gt ${ac_path_FGREP_max-0}; then
-      # Best one so far, save it but keep looking for a better one
-      ac_cv_path_FGREP="$ac_path_FGREP"
-      ac_path_FGREP_max=$ac_count
-    fi
-    # 10*(2^10) chars as input seems more than enough
-    test $ac_count -gt 10 && break
-  done
-  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
-esac
-
-      $ac_path_FGREP_found && break 3
-    done
-  done
-  done
-IFS=$as_save_IFS
-  if test -z "$ac_cv_path_FGREP"; then
-    as_fn_error $? "no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
-  fi
-else
-  ac_cv_path_FGREP=$FGREP
-fi
-
-   fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_FGREP" >&5
-$as_echo "$ac_cv_path_FGREP" >&6; }
- FGREP="$ac_cv_path_FGREP"
-
-
-test -z "$GREP" && GREP=grep
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-# Check whether --with-gnu-ld was given.
-if test "${with_gnu_ld+set}" = set; then :
-  withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
-else
-  with_gnu_ld=no
-fi
-
-ac_prog=ld
-if test "$GCC" = yes; then
-  # Check if gcc -print-prog-name=ld gives a path.
-  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5
-$as_echo_n "checking for ld used by $CC... " >&6; }
-  case $host in
-  *-*-mingw*)
-    # gcc leaves a trailing carriage return which upsets mingw
-    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
-  *)
-    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
-  esac
-  case $ac_prog in
-    # Accept absolute paths.
-    [\\/]* | ?:[\\/]*)
-      re_direlt='/[^/][^/]*/\.\./'
-      # Canonicalize the pathname of ld
-      ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'`
-      while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
-        ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
-      done
-      test -z "$LD" && LD="$ac_prog"
-      ;;
-  "")
-    # If it fails, then pretend we aren't using GCC.
-    ac_prog=ld
-    ;;
-  *)
-    # If it is relative, then search for the first ld in PATH.
-    with_gnu_ld=unknown
-    ;;
-  esac
-elif test "$with_gnu_ld" = yes; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5
-$as_echo_n "checking for GNU ld... " >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5
-$as_echo_n "checking for non-GNU ld... " >&6; }
-fi
-if test "${lt_cv_path_LD+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -z "$LD"; then
-  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-  for ac_dir in $PATH; do
-    IFS="$lt_save_ifs"
-    test -z "$ac_dir" && ac_dir=.
-    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
-      lt_cv_path_LD="$ac_dir/$ac_prog"
-      # Check to see if the program is GNU ld.  I'd rather use --version,
-      # but apparently some variants of GNU ld only accept -v.
-      # Break only if it was the GNU/non-GNU ld that we prefer.
-      case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
-      *GNU* | *'with BFD'*)
-        test "$with_gnu_ld" != no && break
-        ;;
-      *)
-        test "$with_gnu_ld" != yes && break
-        ;;
-      esac
-    fi
-  done
-  IFS="$lt_save_ifs"
-else
-  lt_cv_path_LD="$LD" # Let the user override the test with a path.
-fi
-fi
-
-LD="$lt_cv_path_LD"
-if test -n "$LD"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5
-$as_echo "$LD" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5
-$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; }
-if test "${lt_cv_prog_gnu_ld+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  # I'd rather use --version here, but apparently some GNU lds only accept -v.
-case `$LD -v 2>&1 </dev/null` in
-*GNU* | *'with BFD'*)
-  lt_cv_prog_gnu_ld=yes
-  ;;
-*)
-  lt_cv_prog_gnu_ld=no
-  ;;
-esac
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_gnu_ld" >&5
-$as_echo "$lt_cv_prog_gnu_ld" >&6; }
-with_gnu_ld=$lt_cv_prog_gnu_ld
-
-
-
-
-
-
-
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for BSD- or MS-compatible name lister (nm)" >&5
-$as_echo_n "checking for BSD- or MS-compatible name lister (nm)... " >&6; }
-if test "${lt_cv_path_NM+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$NM"; then
-  # Let the user override the test.
-  lt_cv_path_NM="$NM"
-else
-  lt_nm_to_check="${ac_tool_prefix}nm"
-  if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
-    lt_nm_to_check="$lt_nm_to_check nm"
-  fi
-  for lt_tmp_nm in $lt_nm_to_check; do
-    lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-    for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
-      IFS="$lt_save_ifs"
-      test -z "$ac_dir" && ac_dir=.
-      tmp_nm="$ac_dir/$lt_tmp_nm"
-      if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
-        # Check to see if the nm accepts a BSD-compat flag.
-        # Adding the `sed 1q' prevents false positives on HP-UX, which says:
-        #   nm: unknown option "B" ignored
-        # Tru64's nm complains that /dev/null is an invalid object file
-        case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
-        */dev/null* | *'Invalid file or object type'*)
-          lt_cv_path_NM="$tmp_nm -B"
-          break
-          ;;
-        *)
-          case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
-          */dev/null*)
-            lt_cv_path_NM="$tmp_nm -p"
-            break
-            ;;
-          *)
-            lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
-            continue # so that we can try to find one that supports BSD flags
-            ;;
-          esac
-          ;;
-        esac
-      fi
-    done
-    IFS="$lt_save_ifs"
-  done
-  : ${lt_cv_path_NM=no}
-fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_NM" >&5
-$as_echo "$lt_cv_path_NM" >&6; }
-if test "$lt_cv_path_NM" != "no"; then
-  NM="$lt_cv_path_NM"
-else
-  # Didn't find any BSD compatible name lister, look for dumpbin.
-  if test -n "$ac_tool_prefix"; then
-  for ac_prog in "dumpbin -symbols" "link -dump -symbols"
-  do
-    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
-set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_DUMPBIN+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$DUMPBIN"; then
-  ac_cv_prog_DUMPBIN="$DUMPBIN" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_DUMPBIN="$ac_tool_prefix$ac_prog"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-DUMPBIN=$ac_cv_prog_DUMPBIN
-if test -n "$DUMPBIN"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DUMPBIN" >&5
-$as_echo "$DUMPBIN" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-    test -n "$DUMPBIN" && break
-  done
-fi
-if test -z "$DUMPBIN"; then
-  ac_ct_DUMPBIN=$DUMPBIN
-  for ac_prog in "dumpbin -symbols" "link -dump -symbols"
-do
-  # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_DUMPBIN+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$ac_ct_DUMPBIN"; then
-  ac_cv_prog_ac_ct_DUMPBIN="$ac_ct_DUMPBIN" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_ac_ct_DUMPBIN="$ac_prog"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_DUMPBIN=$ac_cv_prog_ac_ct_DUMPBIN
-if test -n "$ac_ct_DUMPBIN"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DUMPBIN" >&5
-$as_echo "$ac_ct_DUMPBIN" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-  test -n "$ac_ct_DUMPBIN" && break
-done
-
-  if test "x$ac_ct_DUMPBIN" = x; then
-    DUMPBIN=":"
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
-    DUMPBIN=$ac_ct_DUMPBIN
-  fi
-fi
-
-
-  if test "$DUMPBIN" != ":"; then
-    NM="$DUMPBIN"
-  fi
-fi
-test -z "$NM" && NM=nm
-
-
-
-
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the name lister ($NM) interface" >&5
-$as_echo_n "checking the name lister ($NM) interface... " >&6; }
-if test "${lt_cv_nm_interface+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  lt_cv_nm_interface="BSD nm"
-  echo "int some_variable = 0;" > conftest.$ac_ext
-  (eval echo "\"\$as_me:4931: $ac_compile\"" >&5)
-  (eval "$ac_compile" 2>conftest.err)
-  cat conftest.err >&5
-  (eval echo "\"\$as_me:4934: $NM \\\"conftest.$ac_objext\\\"\"" >&5)
-  (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)
-  cat conftest.err >&5
-  (eval echo "\"\$as_me:4937: output\"" >&5)
-  cat conftest.out >&5
-  if $GREP 'External.*some_variable' conftest.out > /dev/null; then
-    lt_cv_nm_interface="MS dumpbin"
-  fi
-  rm -f conftest*
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_nm_interface" >&5
-$as_echo "$lt_cv_nm_interface" >&6; }
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ln -s works" >&5
-$as_echo_n "checking whether ln -s works... " >&6; }
-LN_S=$as_ln_s
-if test "$LN_S" = "ln -s"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, using $LN_S" >&5
-$as_echo "no, using $LN_S" >&6; }
-fi
-
-# find the maximum length of command line arguments
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the maximum length of command line arguments" >&5
-$as_echo_n "checking the maximum length of command line arguments... " >&6; }
-if test "${lt_cv_sys_max_cmd_len+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-    i=0
-  teststring="ABCD"
-
-  case $build_os in
-  msdosdjgpp*)
-    # On DJGPP, this test can blow up pretty badly due to problems in libc
-    # (any single argument exceeding 2000 bytes causes a buffer overrun
-    # during glob expansion).  Even if it were fixed, the result of this
-    # check would be larger than it should be.
-    lt_cv_sys_max_cmd_len=12288;    # 12K is about right
-    ;;
-
-  gnu*)
-    # Under GNU Hurd, this test is not required because there is
-    # no limit to the length of command line arguments.
-    # Libtool will interpret -1 as no limit whatsoever
-    lt_cv_sys_max_cmd_len=-1;
-    ;;
-
-  cygwin* | mingw* | cegcc*)
-    # On Win9x/ME, this test blows up -- it succeeds, but takes
-    # about 5 minutes as the teststring grows exponentially.
-    # Worse, since 9x/ME are not pre-emptively multitasking,
-    # you end up with a "frozen" computer, even though with patience
-    # the test eventually succeeds (with a max line length of 256k).
-    # Instead, let's just punt: use the minimum linelength reported by
-    # all of the supported platforms: 8192 (on NT/2K/XP).
-    lt_cv_sys_max_cmd_len=8192;
-    ;;
-
-  amigaos*)
-    # On AmigaOS with pdksh, this test takes hours, literally.
-    # So we just punt and use a minimum line length of 8192.
-    lt_cv_sys_max_cmd_len=8192;
-    ;;
-
-  netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
-    # This has been around since 386BSD, at least.  Likely further.
-    if test -x /sbin/sysctl; then
-      lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
-    elif test -x /usr/sbin/sysctl; then
-      lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
-    else
-      lt_cv_sys_max_cmd_len=65536       # usable default for all BSDs
-    fi
-    # And add a safety zone
-    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
-    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
-    ;;
-
-  interix*)
-    # We know the value 262144 and hardcode it with a safety zone (like BSD)
-    lt_cv_sys_max_cmd_len=196608
-    ;;
-
-  osf*)
-    # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
-    # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
-    # nice to cause kernel panics so lets avoid the loop below.
-    # First set a reasonable default.
-    lt_cv_sys_max_cmd_len=16384
-    #
-    if test -x /sbin/sysconfig; then
-      case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
-        *1*) lt_cv_sys_max_cmd_len=-1 ;;
-      esac
-    fi
-    ;;
-  sco3.2v5*)
-    lt_cv_sys_max_cmd_len=102400
-    ;;
-  sysv5* | sco5v6* | sysv4.2uw2*)
-    kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
-    if test -n "$kargmax"; then
-      lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[  ]//'`
-    else
-      lt_cv_sys_max_cmd_len=32768
-    fi
-    ;;
-  *)
-    lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
-    if test -n "$lt_cv_sys_max_cmd_len"; then
-      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
-      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
-    else
-      # Make teststring a little bigger before we do anything with it.
-      # a 1K string should be a reasonable start.
-      for i in 1 2 3 4 5 6 7 8 ; do
-        teststring=$teststring$teststring
-      done
-      SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
-      # If test is not a shell built-in, we'll probably end up computing a
-      # maximum length that is only half of the actual maximum length, but
-      # we can't tell.
-      while { test "X"`$SHELL $0 --fallback-echo "X$teststring$teststring" 2>/dev/null` \
-                 = "XX$teststring$teststring"; } >/dev/null 2>&1 &&
-              test $i != 17 # 1/2 MB should be enough
-      do
-        i=`expr $i + 1`
-        teststring=$teststring$teststring
-      done
-      # Only check the string length outside the loop.
-      lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1`
-      teststring=
-      # Add a significant safety factor because C++ compilers can tack on
-      # massive amounts of additional arguments before passing them to the
-      # linker.  It appears as though 1/2 is a usable value.
-      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
-    fi
-    ;;
-  esac
-
-fi
-
-if test -n $lt_cv_sys_max_cmd_len ; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sys_max_cmd_len" >&5
-$as_echo "$lt_cv_sys_max_cmd_len" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: none" >&5
-$as_echo "none" >&6; }
-fi
-max_cmd_len=$lt_cv_sys_max_cmd_len
-
-
-
-
-
-
-: ${CP="cp -f"}
-: ${MV="mv -f"}
-: ${RM="rm -f"}
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands some XSI constructs" >&5
-$as_echo_n "checking whether the shell understands some XSI constructs... " >&6; }
-# Try some XSI features
-xsi_shell=no
-( _lt_dummy="a/b/c"
-  test "${_lt_dummy##*/},${_lt_dummy%/*},"${_lt_dummy%"$_lt_dummy"}, \
-      = c,a/b,, \
-    && eval 'test $(( 1 + 1 )) -eq 2 \
-    && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
-  && xsi_shell=yes
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xsi_shell" >&5
-$as_echo "$xsi_shell" >&6; }
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands \"+=\"" >&5
-$as_echo_n "checking whether the shell understands \"+=\"... " >&6; }
-lt_shell_append=no
-( foo=bar; set foo baz; eval "$1+=\$2" && test "$foo" = barbaz ) \
-    >/dev/null 2>&1 \
-  && lt_shell_append=yes
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_shell_append" >&5
-$as_echo "$lt_shell_append" >&6; }
-
-
-if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
-  lt_unset=unset
-else
-  lt_unset=false
-fi
-
-
-
-
-
-# test EBCDIC or ASCII
-case `echo X|tr X '\101'` in
- A) # ASCII based system
-    # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
-  lt_SP2NL='tr \040 \012'
-  lt_NL2SP='tr \015\012 \040\040'
-  ;;
- *) # EBCDIC based system
-  lt_SP2NL='tr \100 \n'
-  lt_NL2SP='tr \r\n \100\100'
-  ;;
-esac
-
-
-
-
-
-
-
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $LD option to reload object files" >&5
-$as_echo_n "checking for $LD option to reload object files... " >&6; }
-if test "${lt_cv_ld_reload_flag+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  lt_cv_ld_reload_flag='-r'
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_reload_flag" >&5
-$as_echo "$lt_cv_ld_reload_flag" >&6; }
-reload_flag=$lt_cv_ld_reload_flag
-case $reload_flag in
-"" | " "*) ;;
-*) reload_flag=" $reload_flag" ;;
-esac
-reload_cmds='$LD$reload_flag -o $output$reload_objs'
-case $host_os in
-  darwin*)
-    if test "$GCC" = yes; then
-      reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
-    else
-      reload_cmds='$LD$reload_flag -o $output$reload_objs'
-    fi
-    ;;
-esac
-
-
-
-
-
-
-
-
-
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args.
-set dummy ${ac_tool_prefix}objdump; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_OBJDUMP+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$OBJDUMP"; then
-  ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-OBJDUMP=$ac_cv_prog_OBJDUMP
-if test -n "$OBJDUMP"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJDUMP" >&5
-$as_echo "$OBJDUMP" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_OBJDUMP"; then
-  ac_ct_OBJDUMP=$OBJDUMP
-  # Extract the first word of "objdump", so it can be a program name with args.
-set dummy objdump; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_OBJDUMP+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$ac_ct_OBJDUMP"; then
-  ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_ac_ct_OBJDUMP="objdump"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP
-if test -n "$ac_ct_OBJDUMP"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJDUMP" >&5
-$as_echo "$ac_ct_OBJDUMP" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-  if test "x$ac_ct_OBJDUMP" = x; then
-    OBJDUMP="false"
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
-    OBJDUMP=$ac_ct_OBJDUMP
-  fi
-else
-  OBJDUMP="$ac_cv_prog_OBJDUMP"
-fi
-
-test -z "$OBJDUMP" && OBJDUMP=objdump
-
-
-
-
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to recognize dependent libraries" >&5
-$as_echo_n "checking how to recognize dependent libraries... " >&6; }
-if test "${lt_cv_deplibs_check_method+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  lt_cv_file_magic_cmd='$MAGIC_CMD'
-lt_cv_file_magic_test_file=
-lt_cv_deplibs_check_method='unknown'
-# Need to set the preceding variable on all platforms that support
-# interlibrary dependencies.
-# 'none' -- dependencies not supported.
-# `unknown' -- same as none, but documents that we really don't know.
-# 'pass_all' -- all dependencies passed with no checks.
-# 'test_compile' -- check by making test program.
-# 'file_magic [[regex]]' -- check by looking for files in library path
-# which responds to the $file_magic_cmd with a given extended regex.
-# If you have `file' or equivalent on your system and you're not sure
-# whether `pass_all' will *always* work, you probably want this one.
-
-case $host_os in
-aix[4-9]*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-beos*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-bsdi[45]*)
-  lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
-  lt_cv_file_magic_cmd='/usr/bin/file -L'
-  lt_cv_file_magic_test_file=/shlib/libc.so
-  ;;
-
-cygwin*)
-  # func_win32_libid is a shell function defined in ltmain.sh
-  lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
-  lt_cv_file_magic_cmd='func_win32_libid'
-  ;;
-
-mingw* | pw32*)
-  # Base MSYS/MinGW do not provide the 'file' command needed by
-  # func_win32_libid shell function, so use a weaker test based on 'objdump',
-  # unless we find 'file', for example because we are cross-compiling.
-  if ( file / ) >/dev/null 2>&1; then
-    lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
-    lt_cv_file_magic_cmd='func_win32_libid'
-  else
-    lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
-    lt_cv_file_magic_cmd='$OBJDUMP -f'
-  fi
-  ;;
-
-cegcc)
-  # use the weaker test based on 'objdump'. See mingw*.
-  lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?'
-  lt_cv_file_magic_cmd='$OBJDUMP -f'
-  ;;
-
-darwin* | rhapsody*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-freebsd* | dragonfly*)
-  if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
-    case $host_cpu in
-    i*86 )
-      # Not sure whether the presence of OpenBSD here was a mistake.
-      # Let's accept both of them until this is cleared up.
-      lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library'
-      lt_cv_file_magic_cmd=/usr/bin/file
-      lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
-      ;;
-    esac
-  else
-    lt_cv_deplibs_check_method=pass_all
-  fi
-  ;;
-
-gnu*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-hpux10.20* | hpux11*)
-  lt_cv_file_magic_cmd=/usr/bin/file
-  case $host_cpu in
-  ia64*)
-    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64'
-    lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
-    ;;
-  hppa*64*)
-    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]'
-    lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
-    ;;
-  *)
-    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library'
-    lt_cv_file_magic_test_file=/usr/lib/libc.sl
-    ;;
-  esac
-  ;;
-
-interix[3-9]*)
-  # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
-  lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$'
-  ;;
-
-irix5* | irix6* | nonstopux*)
-  case $LD in
-  *-32|*"-32 ") libmagic=32-bit;;
-  *-n32|*"-n32 ") libmagic=N32;;
-  *-64|*"-64 ") libmagic=64-bit;;
-  *) libmagic=never-match;;
-  esac
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-# This must be Linux ELF.
-linux* | k*bsd*-gnu | kopensolaris*-gnu)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-netbsd* | netbsdelf*-gnu)
-  if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
-    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
-  else
-    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$'
-  fi
-  ;;
-
-newos6*)
-  lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)'
-  lt_cv_file_magic_cmd=/usr/bin/file
-  lt_cv_file_magic_test_file=/usr/lib/libnls.so
-  ;;
-
-*nto* | *qnx*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-openbsd*)
-  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$'
-  else
-    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
-  fi
-  ;;
-
-osf3* | osf4* | osf5*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-rdos*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-solaris*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-sysv4 | sysv4.3*)
-  case $host_vendor in
-  motorola)
-    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'
-    lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
-    ;;
-  ncr)
-    lt_cv_deplibs_check_method=pass_all
-    ;;
-  sequent)
-    lt_cv_file_magic_cmd='/bin/file'
-    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )'
-    ;;
-  sni)
-    lt_cv_file_magic_cmd='/bin/file'
-    lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib"
-    lt_cv_file_magic_test_file=/lib/libc.so
-    ;;
-  siemens)
-    lt_cv_deplibs_check_method=pass_all
-    ;;
-  pc)
-    lt_cv_deplibs_check_method=pass_all
-    ;;
-  esac
-  ;;
-
-tpf*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-esac
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_deplibs_check_method" >&5
-$as_echo "$lt_cv_deplibs_check_method" >&6; }
-file_magic_cmd=$lt_cv_file_magic_cmd
-deplibs_check_method=$lt_cv_deplibs_check_method
-test -z "$deplibs_check_method" && deplibs_check_method=unknown
-
-
-
-
-
-
-
-
-
-
-
-
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ar; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_AR+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$AR"; then
-  ac_cv_prog_AR="$AR" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_AR="${ac_tool_prefix}ar"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-AR=$ac_cv_prog_AR
-if test -n "$AR"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5
-$as_echo "$AR" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_AR"; then
-  ac_ct_AR=$AR
-  # Extract the first word of "ar", so it can be a program name with args.
-set dummy ar; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_AR+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$ac_ct_AR"; then
-  ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_ac_ct_AR="ar"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_AR=$ac_cv_prog_ac_ct_AR
-if test -n "$ac_ct_AR"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5
-$as_echo "$ac_ct_AR" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-  if test "x$ac_ct_AR" = x; then
-    AR="false"
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
-    AR=$ac_ct_AR
-  fi
-else
-  AR="$ac_cv_prog_AR"
-fi
-
-test -z "$AR" && AR=ar
-test -z "$AR_FLAGS" && AR_FLAGS=cru
-
-
-
-
-
-
-
-
-
-
-
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
-set dummy ${ac_tool_prefix}strip; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_STRIP+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$STRIP"; then
-  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_STRIP="${ac_tool_prefix}strip"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-STRIP=$ac_cv_prog_STRIP
-if test -n "$STRIP"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5
-$as_echo "$STRIP" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_STRIP"; then
-  ac_ct_STRIP=$STRIP
-  # Extract the first word of "strip", so it can be a program name with args.
-set dummy strip; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$ac_ct_STRIP"; then
-  ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_ac_ct_STRIP="strip"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
-if test -n "$ac_ct_STRIP"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5
-$as_echo "$ac_ct_STRIP" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-  if test "x$ac_ct_STRIP" = x; then
-    STRIP=":"
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
-    STRIP=$ac_ct_STRIP
-  fi
-else
-  STRIP="$ac_cv_prog_STRIP"
-fi
-
-test -z "$STRIP" && STRIP=:
-
-
-
-
-
-
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_RANLIB+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-RANLIB=$ac_cv_prog_RANLIB
-if test -n "$RANLIB"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RANLIB" >&5
-$as_echo "$RANLIB" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_RANLIB"; then
-  ac_ct_RANLIB=$RANLIB
-  # Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$ac_ct_RANLIB"; then
-  ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_ac_ct_RANLIB="ranlib"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
-if test -n "$ac_ct_RANLIB"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RANLIB" >&5
-$as_echo "$ac_ct_RANLIB" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-  if test "x$ac_ct_RANLIB" = x; then
-    RANLIB=":"
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
-    RANLIB=$ac_ct_RANLIB
-  fi
-else
-  RANLIB="$ac_cv_prog_RANLIB"
-fi
-
-test -z "$RANLIB" && RANLIB=:
-
-
-
-
-
-
-# Determine commands to create old-style static archives.
-old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
-old_postinstall_cmds='chmod 644 $oldlib'
-old_postuninstall_cmds=
-
-if test -n "$RANLIB"; then
-  case $host_os in
-  openbsd*)
-    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib"
-    ;;
-  *)
-    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib"
-    ;;
-  esac
-  old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
-fi
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-# If no C compiler was specified, use CC.
-LTCC=${LTCC-"$CC"}
-
-# If no C compiler flags were specified, use CFLAGS.
-LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
-
-# Allow CC to be a program name with arguments.
-compiler=$CC
-
-
-# Check for command to grab the raw symbol name followed by C symbol from nm.
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking command to parse $NM output from $compiler object" >&5
-$as_echo_n "checking command to parse $NM output from $compiler object... " >&6; }
-if test "${lt_cv_sys_global_symbol_pipe+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-
-# These are sane defaults that work on at least a few old systems.
-# [They come from Ultrix.  What could be older than Ultrix?!! ;)]
-
-# Character class describing NM global symbol codes.
-symcode='[BCDEGRST]'
-
-# Regexp to match symbols that can be accessed directly from C.
-sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
-
-# Define system-specific variables.
-case $host_os in
-aix*)
-  symcode='[BCDT]'
-  ;;
-cygwin* | mingw* | pw32* | cegcc*)
-  symcode='[ABCDGISTW]'
-  ;;
-hpux*)
-  if test "$host_cpu" = ia64; then
-    symcode='[ABCDEGRST]'
-  fi
-  ;;
-irix* | nonstopux*)
-  symcode='[BCDEGRST]'
-  ;;
-osf*)
-  symcode='[BCDEGQRST]'
-  ;;
-solaris*)
-  symcode='[BDRT]'
-  ;;
-sco3.2v5*)
-  symcode='[DT]'
-  ;;
-sysv4.2uw2*)
-  symcode='[DT]'
-  ;;
-sysv5* | sco5v6* | unixware* | OpenUNIX*)
-  symcode='[ABDT]'
-  ;;
-sysv4)
-  symcode='[DFNSTU]'
-  ;;
-esac
-
-# If we're using GNU nm, then use its standard symbol codes.
-case `$NM -V 2>&1` in
-*GNU* | *'with BFD'*)
-  symcode='[ABCDGIRSTW]' ;;
-esac
-
-# Transform an extracted symbol line into a proper C declaration.
-# Some systems (esp. on ia64) link data and code symbols differently,
-# so use this general approach.
-lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
-
-# Transform an extracted symbol line into symbol name and symbol address
-lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/  {\"\2\", (void *) \&\2},/p'"
-lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([^ ]*\) $/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \(lib[^ ]*\)$/  {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/  {\"lib\2\", (void *) \&\2},/p'"
-
-# Handle CRLF in mingw tool chain
-opt_cr=
-case $build_os in
-mingw*)
-  opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp
-  ;;
-esac
-
-# Try without a prefix underscore, then with it.
-for ac_symprfx in "" "_"; do
-
-  # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
-  symxfrm="\\1 $ac_symprfx\\2 \\2"
-
-  # Write the raw and C identifiers.
-  if test "$lt_cv_nm_interface" = "MS dumpbin"; then
-    # Fake it for dumpbin and say T for any non-static function
-    # and D for any global variable.
-    # Also find C++ and __fastcall symbols from MSVC++,
-    # which start with @ or ?.
-    lt_cv_sys_global_symbol_pipe="$AWK '"\
-"     {last_section=section; section=\$ 3};"\
-"     /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\
-"     \$ 0!~/External *\|/{next};"\
-"     / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\
-"     {if(hide[section]) next};"\
-"     {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\
-"     {split(\$ 0, a, /\||\r/); split(a[2], s)};"\
-"     s[1]~/^[@?]/{print s[1], s[1]; next};"\
-"     s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\
-"     ' prfx=^$ac_symprfx"
-  else
-    lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[      ]\($symcode$symcode*\)[         ][      ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
-  fi
-
-  # Check to see that the pipe works correctly.
-  pipe_works=no
-
-  rm -f conftest*
-  cat > conftest.$ac_ext <<_LT_EOF
-#ifdef __cplusplus
-extern "C" {
-#endif
-char nm_test_var;
-void nm_test_func(void);
-void nm_test_func(void){}
-#ifdef __cplusplus
-}
-#endif
-int main(){nm_test_var='a';nm_test_func();return(0);}
-_LT_EOF
-
-  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; }; then
-    # Now try to grab the symbols.
-    nlist=conftest.nm
-    if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\""; } >&5
-  (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) 2>&5
-  ac_status=$?
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; } && test -s "$nlist"; then
-      # Try sorting and uniquifying the output.
-      if sort "$nlist" | uniq > "$nlist"T; then
-        mv -f "$nlist"T "$nlist"
-      else
-        rm -f "$nlist"T
-      fi
-
-      # Make sure that we snagged all the symbols we need.
-      if $GREP ' nm_test_var$' "$nlist" >/dev/null; then
-        if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
-          cat <<_LT_EOF > conftest.$ac_ext
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-_LT_EOF
-          # Now generate the symbol file.
-          eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext'
-
-          cat <<_LT_EOF >> conftest.$ac_ext
-
-/* The mapping between symbol names and symbols.  */
-const struct {
-  const char *name;
-  void       *address;
-}
-lt__PROGRAM__LTX_preloaded_symbols[] =
-{
-  { "@PROGRAM@", (void *) 0 },
-_LT_EOF
-          $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/  {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
-          cat <<\_LT_EOF >> conftest.$ac_ext
-  {0, (void *) 0}
-};
-
-/* This works around a problem in FreeBSD linker */
-#ifdef FREEBSD_WORKAROUND
-static const void *lt_preloaded_setup() {
-  return lt__PROGRAM__LTX_preloaded_symbols;
-}
-#endif
-
-#ifdef __cplusplus
-}
-#endif
-_LT_EOF
-          # Now try linking the two files.
-          mv conftest.$ac_objext conftstm.$ac_objext
-          lt_save_LIBS="$LIBS"
-          lt_save_CFLAGS="$CFLAGS"
-          LIBS="conftstm.$ac_objext"
-          CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag"
-          if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; } && test -s conftest${ac_exeext}; then
-            pipe_works=yes
-          fi
-          LIBS="$lt_save_LIBS"
-          CFLAGS="$lt_save_CFLAGS"
-        else
-          echo "cannot find nm_test_func in $nlist" >&5
-        fi
-      else
-        echo "cannot find nm_test_var in $nlist" >&5
-      fi
-    else
-      echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5
-    fi
-  else
-    echo "$progname: failed program was:" >&5
-    cat conftest.$ac_ext >&5
-  fi
-  rm -rf conftest* conftst*
-
-  # Do not use the global_symbol_pipe unless it works.
-  if test "$pipe_works" = yes; then
-    break
-  else
-    lt_cv_sys_global_symbol_pipe=
-  fi
-done
-
-fi
-
-if test -z "$lt_cv_sys_global_symbol_pipe"; then
-  lt_cv_sys_global_symbol_to_cdecl=
-fi
-if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: failed" >&5
-$as_echo "failed" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5
-$as_echo "ok" >&6; }
-fi
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-# Check whether --enable-libtool-lock was given.
-if test "${enable_libtool_lock+set}" = set; then :
-  enableval=$enable_libtool_lock;
-fi
-
-test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
-
-# Some flags need to be propagated to the compiler or linker for good
-# libtool support.
-case $host in
-ia64-*-hpux*)
-  # Find out which ABI we are using.
-  echo 'int i;' > conftest.$ac_ext
-  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; }; then
-    case `/usr/bin/file conftest.$ac_objext` in
-      *ELF-32*)
-        HPUX_IA64_MODE="32"
-        ;;
-      *ELF-64*)
-        HPUX_IA64_MODE="64"
-        ;;
-    esac
-  fi
-  rm -rf conftest*
-  ;;
-*-*-irix6*)
-  # Find out which ABI we are using.
-  echo '#line 6140 "configure"' > conftest.$ac_ext
-  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; }; then
-    if test "$lt_cv_prog_gnu_ld" = yes; then
-      case `/usr/bin/file conftest.$ac_objext` in
-        *32-bit*)
-          LD="${LD-ld} -melf32bsmip"
-          ;;
-        *N32*)
-          LD="${LD-ld} -melf32bmipn32"
-          ;;
-        *64-bit*)
-          LD="${LD-ld} -melf64bmip"
-        ;;
-      esac
-    else
-      case `/usr/bin/file conftest.$ac_objext` in
-        *32-bit*)
-          LD="${LD-ld} -32"
-          ;;
-        *N32*)
-          LD="${LD-ld} -n32"
-          ;;
-        *64-bit*)
-          LD="${LD-ld} -64"
-          ;;
-      esac
-    fi
-  fi
-  rm -rf conftest*
-  ;;
-
-x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \
-s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
-  # Find out which ABI we are using.
-  echo 'int i;' > conftest.$ac_ext
-  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; }; then
-    case `/usr/bin/file conftest.o` in
-      *32-bit*)
-        case $host in
-          x86_64-*kfreebsd*-gnu)
-            LD="${LD-ld} -m elf_i386_fbsd"
-            ;;
-          x86_64-*linux*)
-            LD="${LD-ld} -m elf_i386"
-            ;;
-          ppc64-*linux*|powerpc64-*linux*)
-            LD="${LD-ld} -m elf32ppclinux"
-            ;;
-          s390x-*linux*)
-            LD="${LD-ld} -m elf_s390"
-            ;;
-          sparc64-*linux*)
-            LD="${LD-ld} -m elf32_sparc"
-            ;;
-        esac
-        ;;
-      *64-bit*)
-        case $host in
-          x86_64-*kfreebsd*-gnu)
-            LD="${LD-ld} -m elf_x86_64_fbsd"
-            ;;
-          x86_64-*linux*)
-            LD="${LD-ld} -m elf_x86_64"
-            ;;
-          ppc*-*linux*|powerpc*-*linux*)
-            LD="${LD-ld} -m elf64ppc"
-            ;;
-          s390*-*linux*|s390*-*tpf*)
-            LD="${LD-ld} -m elf64_s390"
-            ;;
-          sparc*-*linux*)
-            LD="${LD-ld} -m elf64_sparc"
-            ;;
-        esac
-        ;;
-    esac
-  fi
-  rm -rf conftest*
-  ;;
-
-*-*-sco3.2v5*)
-  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
-  SAVE_CFLAGS="$CFLAGS"
-  CFLAGS="$CFLAGS -belf"
-  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler needs -belf" >&5
-$as_echo_n "checking whether the C compiler needs -belf... " >&6; }
-if test "${lt_cv_cc_needs_belf+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-     cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
-  lt_cv_cc_needs_belf=yes
-else
-  lt_cv_cc_needs_belf=no
-fi
-rm -f core conftest.err conftest.$ac_objext \
-    conftest$ac_exeext conftest.$ac_ext
-     ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_cc_needs_belf" >&5
-$as_echo "$lt_cv_cc_needs_belf" >&6; }
-  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
-    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
-    CFLAGS="$SAVE_CFLAGS"
-  fi
-  ;;
-sparc*-*solaris*)
-  # Find out which ABI we are using.
-  echo 'int i;' > conftest.$ac_ext
-  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; }; then
-    case `/usr/bin/file conftest.o` in
-    *64-bit*)
-      case $lt_cv_prog_gnu_ld in
-      yes*) LD="${LD-ld} -m elf64_sparc" ;;
-      *)
-        if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
-          LD="${LD-ld} -64"
-        fi
-        ;;
-      esac
-      ;;
-    esac
-  fi
-  rm -rf conftest*
-  ;;
-esac
-
-need_locks="$enable_libtool_lock"
-
-
-  case $host_os in
-    rhapsody* | darwin*)
-    if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args.
-set dummy ${ac_tool_prefix}dsymutil; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_DSYMUTIL+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$DSYMUTIL"; then
-  ac_cv_prog_DSYMUTIL="$DSYMUTIL" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-DSYMUTIL=$ac_cv_prog_DSYMUTIL
-if test -n "$DSYMUTIL"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DSYMUTIL" >&5
-$as_echo "$DSYMUTIL" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_DSYMUTIL"; then
-  ac_ct_DSYMUTIL=$DSYMUTIL
-  # Extract the first word of "dsymutil", so it can be a program name with args.
-set dummy dsymutil; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_DSYMUTIL+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$ac_ct_DSYMUTIL"; then
-  ac_cv_prog_ac_ct_DSYMUTIL="$ac_ct_DSYMUTIL" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_ac_ct_DSYMUTIL="dsymutil"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL
-if test -n "$ac_ct_DSYMUTIL"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DSYMUTIL" >&5
-$as_echo "$ac_ct_DSYMUTIL" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-  if test "x$ac_ct_DSYMUTIL" = x; then
-    DSYMUTIL=":"
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
-    DSYMUTIL=$ac_ct_DSYMUTIL
-  fi
-else
-  DSYMUTIL="$ac_cv_prog_DSYMUTIL"
-fi
-
-    if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args.
-set dummy ${ac_tool_prefix}nmedit; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_NMEDIT+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$NMEDIT"; then
-  ac_cv_prog_NMEDIT="$NMEDIT" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-NMEDIT=$ac_cv_prog_NMEDIT
-if test -n "$NMEDIT"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $NMEDIT" >&5
-$as_echo "$NMEDIT" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_NMEDIT"; then
-  ac_ct_NMEDIT=$NMEDIT
-  # Extract the first word of "nmedit", so it can be a program name with args.
-set dummy nmedit; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_NMEDIT+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$ac_ct_NMEDIT"; then
-  ac_cv_prog_ac_ct_NMEDIT="$ac_ct_NMEDIT" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_ac_ct_NMEDIT="nmedit"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT
-if test -n "$ac_ct_NMEDIT"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_NMEDIT" >&5
-$as_echo "$ac_ct_NMEDIT" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-  if test "x$ac_ct_NMEDIT" = x; then
-    NMEDIT=":"
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
-    NMEDIT=$ac_ct_NMEDIT
-  fi
-else
-  NMEDIT="$ac_cv_prog_NMEDIT"
-fi
-
-    if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}lipo", so it can be a program name with args.
-set dummy ${ac_tool_prefix}lipo; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_LIPO+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$LIPO"; then
-  ac_cv_prog_LIPO="$LIPO" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_LIPO="${ac_tool_prefix}lipo"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-LIPO=$ac_cv_prog_LIPO
-if test -n "$LIPO"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIPO" >&5
-$as_echo "$LIPO" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_LIPO"; then
-  ac_ct_LIPO=$LIPO
-  # Extract the first word of "lipo", so it can be a program name with args.
-set dummy lipo; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_LIPO+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$ac_ct_LIPO"; then
-  ac_cv_prog_ac_ct_LIPO="$ac_ct_LIPO" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_ac_ct_LIPO="lipo"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_LIPO=$ac_cv_prog_ac_ct_LIPO
-if test -n "$ac_ct_LIPO"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_LIPO" >&5
-$as_echo "$ac_ct_LIPO" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-  if test "x$ac_ct_LIPO" = x; then
-    LIPO=":"
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
-    LIPO=$ac_ct_LIPO
-  fi
-else
-  LIPO="$ac_cv_prog_LIPO"
-fi
-
-    if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}otool", so it can be a program name with args.
-set dummy ${ac_tool_prefix}otool; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_OTOOL+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$OTOOL"; then
-  ac_cv_prog_OTOOL="$OTOOL" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_OTOOL="${ac_tool_prefix}otool"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-OTOOL=$ac_cv_prog_OTOOL
-if test -n "$OTOOL"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL" >&5
-$as_echo "$OTOOL" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_OTOOL"; then
-  ac_ct_OTOOL=$OTOOL
-  # Extract the first word of "otool", so it can be a program name with args.
-set dummy otool; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_OTOOL+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$ac_ct_OTOOL"; then
-  ac_cv_prog_ac_ct_OTOOL="$ac_ct_OTOOL" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_ac_ct_OTOOL="otool"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_OTOOL=$ac_cv_prog_ac_ct_OTOOL
-if test -n "$ac_ct_OTOOL"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL" >&5
-$as_echo "$ac_ct_OTOOL" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-  if test "x$ac_ct_OTOOL" = x; then
-    OTOOL=":"
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
-    OTOOL=$ac_ct_OTOOL
-  fi
-else
-  OTOOL="$ac_cv_prog_OTOOL"
-fi
-
-    if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}otool64", so it can be a program name with args.
-set dummy ${ac_tool_prefix}otool64; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_OTOOL64+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$OTOOL64"; then
-  ac_cv_prog_OTOOL64="$OTOOL64" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_OTOOL64="${ac_tool_prefix}otool64"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-OTOOL64=$ac_cv_prog_OTOOL64
-if test -n "$OTOOL64"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL64" >&5
-$as_echo "$OTOOL64" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_OTOOL64"; then
-  ac_ct_OTOOL64=$OTOOL64
-  # Extract the first word of "otool64", so it can be a program name with args.
-set dummy otool64; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_OTOOL64+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$ac_ct_OTOOL64"; then
-  ac_cv_prog_ac_ct_OTOOL64="$ac_ct_OTOOL64" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_ac_ct_OTOOL64="otool64"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_OTOOL64=$ac_cv_prog_ac_ct_OTOOL64
-if test -n "$ac_ct_OTOOL64"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL64" >&5
-$as_echo "$ac_ct_OTOOL64" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-  if test "x$ac_ct_OTOOL64" = x; then
-    OTOOL64=":"
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
-    OTOOL64=$ac_ct_OTOOL64
-  fi
-else
-  OTOOL64="$ac_cv_prog_OTOOL64"
-fi
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -single_module linker flag" >&5
-$as_echo_n "checking for -single_module linker flag... " >&6; }
-if test "${lt_cv_apple_cc_single_mod+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  lt_cv_apple_cc_single_mod=no
-      if test -z "${LT_MULTI_MODULE}"; then
-        # By default we will add the -single_module flag. You can override
-        # by either setting the environment variable LT_MULTI_MODULE
-        # non-empty at configure time, or by adding -multi_module to the
-        # link flags.
-        rm -rf libconftest.dylib*
-        echo "int foo(void){return 1;}" > conftest.c
-        echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
--dynamiclib -Wl,-single_module conftest.c" >&5
-        $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
-          -dynamiclib -Wl,-single_module conftest.c 2>conftest.err
-        _lt_result=$?
-        if test -f libconftest.dylib && test ! -s conftest.err && test $_lt_result = 0; then
-          lt_cv_apple_cc_single_mod=yes
-        else
-          cat conftest.err >&5
-        fi
-        rm -rf libconftest.dylib*
-        rm -f conftest.*
-      fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_apple_cc_single_mod" >&5
-$as_echo "$lt_cv_apple_cc_single_mod" >&6; }
-    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -exported_symbols_list linker flag" >&5
-$as_echo_n "checking for -exported_symbols_list linker flag... " >&6; }
-if test "${lt_cv_ld_exported_symbols_list+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  lt_cv_ld_exported_symbols_list=no
-      save_LDFLAGS=$LDFLAGS
-      echo "_main" > conftest.sym
-      LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym"
-      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
-  lt_cv_ld_exported_symbols_list=yes
-else
-  lt_cv_ld_exported_symbols_list=no
-fi
-rm -f core conftest.err conftest.$ac_objext \
-    conftest$ac_exeext conftest.$ac_ext
-        LDFLAGS="$save_LDFLAGS"
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_exported_symbols_list" >&5
-$as_echo "$lt_cv_ld_exported_symbols_list" >&6; }
-    case $host_os in
-    rhapsody* | darwin1.[012])
-      _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
-    darwin1.*)
-      _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
-    darwin*) # darwin 5.x on
-      # if running on 10.5 or later, the deployment target defaults
-      # to the OS version, if on x86, and 10.4, the deployment
-      # target defaults to 10.4. Don't you love it?
-      case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
-        10.0,*86*-darwin8*|10.0,*-darwin[91]*)
-          _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
-        10.[012]*)
-          _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
-        10.*)
-          _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
-      esac
-    ;;
-  esac
-    if test "$lt_cv_apple_cc_single_mod" = "yes"; then
-      _lt_dar_single_mod='$single_module'
-    fi
-    if test "$lt_cv_ld_exported_symbols_list" = "yes"; then
-      _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym'
-    else
-      _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}'
-    fi
-    if test "$DSYMUTIL" != ":"; then
-      _lt_dsymutil='~$DSYMUTIL $lib || :'
-    else
-      _lt_dsymutil=
-    fi
-    ;;
-  esac
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5
-$as_echo_n "checking how to run the C preprocessor... " >&6; }
-# On Suns, sometimes $CPP names a directory.
-if test -n "$CPP" && test -d "$CPP"; then
-  CPP=
-fi
-if test -z "$CPP"; then
-  if test "${ac_cv_prog_CPP+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-      # Double quotes because CPP needs to be expanded
-    for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
-    do
-      ac_preproc_ok=false
-for ac_c_preproc_warn_flag in '' yes
-do
-  # Use a header file that comes with gcc, so configuring glibc
-  # with a fresh cross-compiler works.
-  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-  # <limits.h> exists even on freestanding compilers.
-  # On the NeXT, cc -E runs the code through the compiler's parser,
-  # not just through cpp. "Syntax error" is here to catch this case.
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-                     Syntax error
-_ACEOF
-if ac_fn_c_try_cpp "$LINENO"; then :
-
-else
-  # Broken: fails on valid input.
-continue
-fi
-rm -f conftest.err conftest.i conftest.$ac_ext
-
-  # OK, works on sane cases.  Now check whether nonexistent headers
-  # can be detected and how.
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-#include <ac_nonexistent.h>
-_ACEOF
-if ac_fn_c_try_cpp "$LINENO"; then :
-  # Broken: success on invalid input.
-continue
-else
-  # Passes both tests.
-ac_preproc_ok=:
-break
-fi
-rm -f conftest.err conftest.i conftest.$ac_ext
-
-done
-# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-rm -f conftest.i conftest.err conftest.$ac_ext
-if $ac_preproc_ok; then :
-  break
-fi
-
-    done
-    ac_cv_prog_CPP=$CPP
-
-fi
-  CPP=$ac_cv_prog_CPP
-else
-  ac_cv_prog_CPP=$CPP
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5
-$as_echo "$CPP" >&6; }
-ac_preproc_ok=false
-for ac_c_preproc_warn_flag in '' yes
-do
-  # Use a header file that comes with gcc, so configuring glibc
-  # with a fresh cross-compiler works.
-  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-  # <limits.h> exists even on freestanding compilers.
-  # On the NeXT, cc -E runs the code through the compiler's parser,
-  # not just through cpp. "Syntax error" is here to catch this case.
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-                     Syntax error
-_ACEOF
-if ac_fn_c_try_cpp "$LINENO"; then :
-
-else
-  # Broken: fails on valid input.
-continue
-fi
-rm -f conftest.err conftest.i conftest.$ac_ext
-
-  # OK, works on sane cases.  Now check whether nonexistent headers
-  # can be detected and how.
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-#include <ac_nonexistent.h>
-_ACEOF
-if ac_fn_c_try_cpp "$LINENO"; then :
-  # Broken: success on invalid input.
-continue
-else
-  # Passes both tests.
-ac_preproc_ok=:
-break
-fi
-rm -f conftest.err conftest.i conftest.$ac_ext
-
-done
-# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-rm -f conftest.i conftest.err conftest.$ac_ext
-if $ac_preproc_ok; then :
-
-else
-  { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error $? "C preprocessor \"$CPP\" fails sanity check
-See \`config.log' for more details" "$LINENO" 5 ; }
-fi
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5
-$as_echo_n "checking for ANSI C header files... " >&6; }
-if test "${ac_cv_header_stdc+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-#include <stdlib.h>
-#include <stdarg.h>
-#include <string.h>
-#include <float.h>
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-  ac_cv_header_stdc=yes
-else
-  ac_cv_header_stdc=no
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-
-if test $ac_cv_header_stdc = yes; then
-  # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-#include <string.h>
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-  $EGREP "memchr" >/dev/null 2>&1; then :
-
-else
-  ac_cv_header_stdc=no
-fi
-rm -f conftest*
-
-fi
-
-if test $ac_cv_header_stdc = yes; then
-  # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-#include <stdlib.h>
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-  $EGREP "free" >/dev/null 2>&1; then :
-
-else
-  ac_cv_header_stdc=no
-fi
-rm -f conftest*
-
-fi
-
-if test $ac_cv_header_stdc = yes; then
-  # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
-  if test "$cross_compiling" = yes; then :
-  :
-else
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-#include <ctype.h>
-#include <stdlib.h>
-#if ((' ' & 0x0FF) == 0x020)
-# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
-# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
-#else
-# define ISLOWER(c) \
-                   (('a' <= (c) && (c) <= 'i') \
-                     || ('j' <= (c) && (c) <= 'r') \
-                     || ('s' <= (c) && (c) <= 'z'))
-# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
-#endif
-
-#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
-int
-main ()
-{
-  int i;
-  for (i = 0; i < 256; i++)
-    if (XOR (islower (i), ISLOWER (i))
-        || toupper (i) != TOUPPER (i))
-      return 2;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_run "$LINENO"; then :
-
-else
-  ac_cv_header_stdc=no
-fi
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
-  conftest.$ac_objext conftest.beam conftest.$ac_ext
-fi
-
-fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5
-$as_echo "$ac_cv_header_stdc" >&6; }
-if test $ac_cv_header_stdc = yes; then
-
-$as_echo "#define STDC_HEADERS 1" >>confdefs.h
-
-fi
-
-# On IRIX 5.3, sys/types and inttypes.h are conflicting.
-for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
-                  inttypes.h stdint.h unistd.h
-do :
-  as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
-ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default
-"
-if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
-  cat >>confdefs.h <<_ACEOF
-#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
-_ACEOF
-
-fi
-
-done
-
-
-for ac_header in dlfcn.h
-do :
-  ac_fn_c_check_header_compile "$LINENO" "dlfcn.h" "ac_cv_header_dlfcn_h" "$ac_includes_default
-"
-if test "x$ac_cv_header_dlfcn_h" = x""yes; then :
-  cat >>confdefs.h <<_ACEOF
-#define HAVE_DLFCN_H 1
-_ACEOF
-
-fi
-
-done
-
-
-
-# Set options
-
-
-
-        enable_dlopen=no
-
-
-
-            # Check whether --enable-shared was given.
-if test "${enable_shared+set}" = set; then :
-  enableval=$enable_shared; p=${PACKAGE-default}
-    case $enableval in
-    yes) enable_shared=yes ;;
-    no) enable_shared=no ;;
-    *)
-      enable_shared=no
-      # Look at the argument we got.  We use all the common list separators.
-      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-      for pkg in $enableval; do
-        IFS="$lt_save_ifs"
-        if test "X$pkg" = "X$p"; then
-          enable_shared=yes
-        fi
-      done
-      IFS="$lt_save_ifs"
-      ;;
-    esac
-else
-  enable_shared=yes
-fi
-
-
-
-
-
-
-
-
-
-  # Check whether --enable-static was given.
-if test "${enable_static+set}" = set; then :
-  enableval=$enable_static; p=${PACKAGE-default}
-    case $enableval in
-    yes) enable_static=yes ;;
-    no) enable_static=no ;;
-    *)
-     enable_static=no
-      # Look at the argument we got.  We use all the common list separators.
-      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-      for pkg in $enableval; do
-        IFS="$lt_save_ifs"
-        if test "X$pkg" = "X$p"; then
-          enable_static=yes
-        fi
-      done
-      IFS="$lt_save_ifs"
-      ;;
-    esac
-else
-  enable_static=yes
-fi
-
-
-
-
-
-
-
-
-
-
-# Check whether --with-pic was given.
-if test "${with_pic+set}" = set; then :
-  withval=$with_pic; pic_mode="$withval"
-else
-  pic_mode=default
-fi
-
-
-test -z "$pic_mode" && pic_mode=default
-
-
-
-
-
-
-
-  # Check whether --enable-fast-install was given.
-if test "${enable_fast_install+set}" = set; then :
-  enableval=$enable_fast_install; p=${PACKAGE-default}
-    case $enableval in
-    yes) enable_fast_install=yes ;;
-    no) enable_fast_install=no ;;
-    *)
-      enable_fast_install=no
-      # Look at the argument we got.  We use all the common list separators.
-      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-      for pkg in $enableval; do
-        IFS="$lt_save_ifs"
-        if test "X$pkg" = "X$p"; then
-          enable_fast_install=yes
-        fi
-      done
-      IFS="$lt_save_ifs"
-      ;;
-    esac
-else
-  enable_fast_install=yes
-fi
-
-
-
-
-
-
-
-
-
-
-
-# This can be used to rebuild libtool when needed
-LIBTOOL_DEPS="$ltmain"
-
-# Always use our own libtool.
-LIBTOOL='$(SHELL) $(top_builddir)/libtool'
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-test -z "$LN_S" && LN_S="ln -s"
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-if test -n "${ZSH_VERSION+set}" ; then
-   setopt NO_GLOB_SUBST
-fi
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for objdir" >&5
-$as_echo_n "checking for objdir... " >&6; }
-if test "${lt_cv_objdir+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  rm -f .libs 2>/dev/null
-mkdir .libs 2>/dev/null
-if test -d .libs; then
-  lt_cv_objdir=.libs
-else
-  # MS-DOS does not allow filenames that begin with a dot.
-  lt_cv_objdir=_libs
-fi
-rmdir .libs 2>/dev/null
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_objdir" >&5
-$as_echo "$lt_cv_objdir" >&6; }
-objdir=$lt_cv_objdir
-
-
-
-
-
-cat >>confdefs.h <<_ACEOF
-#define LT_OBJDIR "$lt_cv_objdir/"
-_ACEOF
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-case $host_os in
-aix3*)
-  # AIX sometimes has problems with the GCC collect2 program.  For some
-  # reason, if we set the COLLECT_NAMES environment variable, the problems
-  # vanish in a puff of smoke.
-  if test "X${COLLECT_NAMES+set}" != Xset; then
-    COLLECT_NAMES=
-    export COLLECT_NAMES
-  fi
-  ;;
-esac
-
-# Sed substitution that helps us do robust quoting.  It backslashifies
-# metacharacters that are still active within double-quoted strings.
-sed_quote_subst='s/\(["`$\\]\)/\\\1/g'
-
-# Same as above, but do not quote variable references.
-double_quote_subst='s/\(["`\\]\)/\\\1/g'
-
-# Sed substitution to delay expansion of an escaped shell variable in a
-# double_quote_subst'ed string.
-delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
-
-# Sed substitution to delay expansion of an escaped single quote.
-delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
-
-# Sed substitution to avoid accidental globbing in evaled expressions
-no_glob_subst='s/\*/\\\*/g'
-
-# Global variables:
-ofile=libtool
-can_build_shared=yes
-
-# All known linkers require a `.a' archive for static linking (except MSVC,
-# which needs '.lib').
-libext=a
-
-with_gnu_ld="$lt_cv_prog_gnu_ld"
-
-old_CC="$CC"
-old_CFLAGS="$CFLAGS"
-
-# Set sane defaults for various variables
-test -z "$CC" && CC=cc
-test -z "$LTCC" && LTCC=$CC
-test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
-test -z "$LD" && LD=ld
-test -z "$ac_objext" && ac_objext=o
-
-for cc_temp in $compiler""; do
-  case $cc_temp in
-    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
-    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
-    \-*) ;;
-    *) break;;
-  esac
-done
-cc_basename=`$ECHO "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
-
-
-# Only perform the check for file, if the check method requires it
-test -z "$MAGIC_CMD" && MAGIC_CMD=file
-case $deplibs_check_method in
-file_magic*)
-  if test "$file_magic_cmd" = '$MAGIC_CMD'; then
-    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${ac_tool_prefix}file" >&5
-$as_echo_n "checking for ${ac_tool_prefix}file... " >&6; }
-if test "${lt_cv_path_MAGIC_CMD+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  case $MAGIC_CMD in
-[\\/*] |  ?:[\\/]*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
-  ;;
-*)
-  lt_save_MAGIC_CMD="$MAGIC_CMD"
-  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-  ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
-  for ac_dir in $ac_dummy; do
-    IFS="$lt_save_ifs"
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/${ac_tool_prefix}file; then
-      lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file"
-      if test -n "$file_magic_test_file"; then
-        case $deplibs_check_method in
-        "file_magic "*)
-          file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
-          MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-          if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
-            $EGREP "$file_magic_regex" > /dev/null; then
-            :
-          else
-            cat <<_LT_EOF 1>&2
-
-*** Warning: the command libtool uses to detect shared libraries,
-*** $file_magic_cmd, produces output that libtool cannot recognize.
-*** The result is that libtool may fail to recognize shared libraries
-*** as such.  This will affect the creation of libtool libraries that
-*** depend on shared libraries, but programs linked with such libtool
-*** libraries will work regardless of this problem.  Nevertheless, you
-*** may want to report the problem to your system manager and/or to
-*** bug-libtool@gnu.org
-
-_LT_EOF
-          fi ;;
-        esac
-      fi
-      break
-    fi
-  done
-  IFS="$lt_save_ifs"
-  MAGIC_CMD="$lt_save_MAGIC_CMD"
-  ;;
-esac
-fi
-
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-if test -n "$MAGIC_CMD"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5
-$as_echo "$MAGIC_CMD" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-
-
-
-if test -z "$lt_cv_path_MAGIC_CMD"; then
-  if test -n "$ac_tool_prefix"; then
-    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for file" >&5
-$as_echo_n "checking for file... " >&6; }
-if test "${lt_cv_path_MAGIC_CMD+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  case $MAGIC_CMD in
-[\\/*] |  ?:[\\/]*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
-  ;;
-*)
-  lt_save_MAGIC_CMD="$MAGIC_CMD"
-  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-  ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
-  for ac_dir in $ac_dummy; do
-    IFS="$lt_save_ifs"
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/file; then
-      lt_cv_path_MAGIC_CMD="$ac_dir/file"
-      if test -n "$file_magic_test_file"; then
-        case $deplibs_check_method in
-        "file_magic "*)
-          file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
-          MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-          if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
-            $EGREP "$file_magic_regex" > /dev/null; then
-            :
-          else
-            cat <<_LT_EOF 1>&2
-
-*** Warning: the command libtool uses to detect shared libraries,
-*** $file_magic_cmd, produces output that libtool cannot recognize.
-*** The result is that libtool may fail to recognize shared libraries
-*** as such.  This will affect the creation of libtool libraries that
-*** depend on shared libraries, but programs linked with such libtool
-*** libraries will work regardless of this problem.  Nevertheless, you
-*** may want to report the problem to your system manager and/or to
-*** bug-libtool@gnu.org
-
-_LT_EOF
-          fi ;;
-        esac
-      fi
-      break
-    fi
-  done
-  IFS="$lt_save_ifs"
-  MAGIC_CMD="$lt_save_MAGIC_CMD"
-  ;;
-esac
-fi
-
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-if test -n "$MAGIC_CMD"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5
-$as_echo "$MAGIC_CMD" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-  else
-    MAGIC_CMD=:
-  fi
-fi
-
-  fi
-  ;;
-esac
-
-# Use C for the default configuration in the libtool script
-
-lt_save_CC="$CC"
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-# Source file extension for C test sources.
-ac_ext=c
-
-# Object file extension for compiled C test sources.
-objext=o
-objext=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code="int some_variable = 0;"
-
-# Code to be used in simple link tests
-lt_simple_link_test_code='int main(){return(0);}'
-
-
-
-
-
-
-
-# If no C compiler was specified, use CC.
-LTCC=${LTCC-"$CC"}
-
-# If no C compiler flags were specified, use CFLAGS.
-LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
-
-# Allow CC to be a program name with arguments.
-compiler=$CC
-
-# Save the default compiler, since it gets overwritten when the other
-# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP.
-compiler_DEFAULT=$CC
-
-# save warnings/boilerplate of simple test code
-ac_outfile=conftest.$ac_objext
-echo "$lt_simple_compile_test_code" >conftest.$ac_ext
-eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-_lt_compiler_boilerplate=`cat conftest.err`
-$RM conftest*
-
-ac_outfile=conftest.$ac_objext
-echo "$lt_simple_link_test_code" >conftest.$ac_ext
-eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-_lt_linker_boilerplate=`cat conftest.err`
-$RM -r conftest*
-
-
-## CAVEAT EMPTOR:
-## There is no encapsulation within the following macros, do not change
-## the running order or otherwise move them around unless you know exactly
-## what you are doing...
-if test -n "$compiler"; then
-
-lt_prog_compiler_no_builtin_flag=
-
-if test "$GCC" = yes; then
-  lt_prog_compiler_no_builtin_flag=' -fno-builtin'
-
-  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
-$as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; }
-if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  lt_cv_prog_compiler_rtti_exceptions=no
-   ac_outfile=conftest.$ac_objext
-   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-   lt_compiler_flag="-fno-rtti -fno-exceptions"
-   # Insert the option either (1) after the last *FLAGS variable, or
-   # (2) before a word containing "conftest.", or (3) at the end.
-   # Note that $ac_compile itself does not contain backslashes and begins
-   # with a dollar sign (not a hyphen), so the echo should work correctly.
-   # The option is referenced via a variable to avoid confusing sed.
-   lt_compile=`echo "$ac_compile" | $SED \
-   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-   -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:7667: $lt_compile\"" >&5)
-   (eval "$lt_compile" 2>conftest.err)
-   ac_status=$?
-   cat conftest.err >&5
-   echo "$as_me:7671: \$? = $ac_status" >&5
-   if (exit $ac_status) && test -s "$ac_outfile"; then
-     # The compiler can only warn and ignore the option if not recognized
-     # So say no if there are warnings other than the usual output.
-     $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
-     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
-       lt_cv_prog_compiler_rtti_exceptions=yes
-     fi
-   fi
-   $RM conftest*
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_rtti_exceptions" >&5
-$as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; }
-
-if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then
-    lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions"
-else
-    :
-fi
-
-fi
-
-
-
-
-
-
-  lt_prog_compiler_wl=
-lt_prog_compiler_pic=
-lt_prog_compiler_static=
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5
-$as_echo_n "checking for $compiler option to produce PIC... " >&6; }
-
-  if test "$GCC" = yes; then
-    lt_prog_compiler_wl='-Wl,'
-    lt_prog_compiler_static='-static'
-
-    case $host_os in
-      aix*)
-      # All AIX code is PIC.
-      if test "$host_cpu" = ia64; then
-        # AIX 5 now supports IA64 processor
-        lt_prog_compiler_static='-Bstatic'
-      fi
-      ;;
-
-    amigaos*)
-      case $host_cpu in
-      powerpc)
-            # see comment about AmigaOS4 .so support
-            lt_prog_compiler_pic='-fPIC'
-        ;;
-      m68k)
-            # FIXME: we need at least 68020 code to build shared libraries, but
-            # adding the `-m68020' flag to GCC prevents building anything better,
-            # like `-m68040'.
-            lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4'
-        ;;
-      esac
-      ;;
-
-    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
-      # PIC is the default for these OSes.
-      ;;
-
-    mingw* | cygwin* | pw32* | os2* | cegcc*)
-      # This hack is so that the source file can tell whether it is being
-      # built for inclusion in a dll (and should export symbols for example).
-      # Although the cygwin gcc ignores -fPIC, still need this for old-style
-      # (--disable-auto-import) libraries
-      lt_prog_compiler_pic='-DDLL_EXPORT'
-      ;;
-
-    darwin* | rhapsody*)
-      # PIC is the default on this platform
-      # Common symbols not allowed in MH_DYLIB files
-      lt_prog_compiler_pic='-fno-common'
-      ;;
-
-    hpux*)
-      # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
-      # PA HP-UX.  On IA64 HP-UX, PIC is the default but the pic flag
-      # sets the default TLS model and affects inlining.
-      case $host_cpu in
-      hppa*64*)
-        # +Z the default
-        ;;
-      *)
-        lt_prog_compiler_pic='-fPIC'
-        ;;
-      esac
-      ;;
-
-    interix[3-9]*)
-      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
-      # Instead, we relocate shared libraries at runtime.
-      ;;
-
-    msdosdjgpp*)
-      # Just because we use GCC doesn't mean we suddenly get shared libraries
-      # on systems that don't support them.
-      lt_prog_compiler_can_build_shared=no
-      enable_shared=no
-      ;;
-
-    *nto* | *qnx*)
-      # QNX uses GNU C++, but need to define -shared option too, otherwise
-      # it will coredump.
-      lt_prog_compiler_pic='-fPIC -shared'
-      ;;
-
-    sysv4*MP*)
-      if test -d /usr/nec; then
-        lt_prog_compiler_pic=-Kconform_pic
-      fi
-      ;;
-
-    *)
-      lt_prog_compiler_pic='-fPIC'
-      ;;
-    esac
-  else
-    # PORTME Check for flag to pass linker flags through the system compiler.
-    case $host_os in
-    aix*)
-      lt_prog_compiler_wl='-Wl,'
-      if test "$host_cpu" = ia64; then
-        # AIX 5 now supports IA64 processor
-        lt_prog_compiler_static='-Bstatic'
-      else
-        lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp'
-      fi
-      ;;
-
-    mingw* | cygwin* | pw32* | os2* | cegcc*)
-      # This hack is so that the source file can tell whether it is being
-      # built for inclusion in a dll (and should export symbols for example).
-      lt_prog_compiler_pic='-DDLL_EXPORT'
-      ;;
-
-    hpux9* | hpux10* | hpux11*)
-      lt_prog_compiler_wl='-Wl,'
-      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-      # not for PA HP-UX.
-      case $host_cpu in
-      hppa*64*|ia64*)
-        # +Z the default
-        ;;
-      *)
-        lt_prog_compiler_pic='+Z'
-        ;;
-      esac
-      # Is there a better lt_prog_compiler_static that works with the bundled CC?
-      lt_prog_compiler_static='${wl}-a ${wl}archive'
-      ;;
-
-    irix5* | irix6* | nonstopux*)
-      lt_prog_compiler_wl='-Wl,'
-      # PIC (with -KPIC) is the default.
-      lt_prog_compiler_static='-non_shared'
-      ;;
-
-    linux* | k*bsd*-gnu | kopensolaris*-gnu)
-      case $cc_basename in
-      # old Intel for x86_64 which still supported -KPIC.
-      ecc*)
-        lt_prog_compiler_wl='-Wl,'
-        lt_prog_compiler_pic='-KPIC'
-        lt_prog_compiler_static='-static'
-        ;;
-      # icc used to be incompatible with GCC.
-      # ICC 10 doesn't accept -KPIC any more.
-      icc* | ifort*)
-        lt_prog_compiler_wl='-Wl,'
-        lt_prog_compiler_pic='-fPIC'
-        lt_prog_compiler_static='-static'
-        ;;
-      # Lahey Fortran 8.1.
-      lf95*)
-        lt_prog_compiler_wl='-Wl,'
-        lt_prog_compiler_pic='--shared'
-        lt_prog_compiler_static='--static'
-        ;;
-      pgcc* | pgf77* | pgf90* | pgf95*)
-        # Portland Group compilers (*not* the Pentium gcc compiler,
-        # which looks to be a dead project)
-        lt_prog_compiler_wl='-Wl,'
-        lt_prog_compiler_pic='-fpic'
-        lt_prog_compiler_static='-Bstatic'
-        ;;
-      ccc*)
-        lt_prog_compiler_wl='-Wl,'
-        # All Alpha code is PIC.
-        lt_prog_compiler_static='-non_shared'
-        ;;
-      xl*)
-        # IBM XL C 8.0/Fortran 10.1 on PPC
-        lt_prog_compiler_wl='-Wl,'
-        lt_prog_compiler_pic='-qpic'
-        lt_prog_compiler_static='-qstaticlink'
-        ;;
-      *)
-        case `$CC -V 2>&1 | sed 5q` in
-        *Sun\ C*)
-          # Sun C 5.9
-          lt_prog_compiler_pic='-KPIC'
-          lt_prog_compiler_static='-Bstatic'
-          lt_prog_compiler_wl='-Wl,'
-          ;;
-        *Sun\ F*)
-          # Sun Fortran 8.3 passes all unrecognized flags to the linker
-          lt_prog_compiler_pic='-KPIC'
-          lt_prog_compiler_static='-Bstatic'
-          lt_prog_compiler_wl=''
-          ;;
-        esac
-        ;;
-      esac
-      ;;
-
-    newsos6)
-      lt_prog_compiler_pic='-KPIC'
-      lt_prog_compiler_static='-Bstatic'
-      ;;
-
-    *nto* | *qnx*)
-      # QNX uses GNU C++, but need to define -shared option too, otherwise
-      # it will coredump.
-      lt_prog_compiler_pic='-fPIC -shared'
-      ;;
-
-    osf3* | osf4* | osf5*)
-      lt_prog_compiler_wl='-Wl,'
-      # All OSF/1 code is PIC.
-      lt_prog_compiler_static='-non_shared'
-      ;;
-
-    rdos*)
-      lt_prog_compiler_static='-non_shared'
-      ;;
-
-    solaris*)
-      lt_prog_compiler_pic='-KPIC'
-      lt_prog_compiler_static='-Bstatic'
-      case $cc_basename in
-      f77* | f90* | f95*)
-        lt_prog_compiler_wl='-Qoption ld ';;
-      *)
-        lt_prog_compiler_wl='-Wl,';;
-      esac
-      ;;
-
-    sunos4*)
-      lt_prog_compiler_wl='-Qoption ld '
-      lt_prog_compiler_pic='-PIC'
-      lt_prog_compiler_static='-Bstatic'
-      ;;
-
-    sysv4 | sysv4.2uw2* | sysv4.3*)
-      lt_prog_compiler_wl='-Wl,'
-      lt_prog_compiler_pic='-KPIC'
-      lt_prog_compiler_static='-Bstatic'
-      ;;
-
-    sysv4*MP*)
-      if test -d /usr/nec ;then
-        lt_prog_compiler_pic='-Kconform_pic'
-        lt_prog_compiler_static='-Bstatic'
-      fi
-      ;;
-
-    sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
-      lt_prog_compiler_wl='-Wl,'
-      lt_prog_compiler_pic='-KPIC'
-      lt_prog_compiler_static='-Bstatic'
-      ;;
-
-    unicos*)
-      lt_prog_compiler_wl='-Wl,'
-      lt_prog_compiler_can_build_shared=no
-      ;;
-
-    uts4*)
-      lt_prog_compiler_pic='-pic'
-      lt_prog_compiler_static='-Bstatic'
-      ;;
-
-    *)
-      lt_prog_compiler_can_build_shared=no
-      ;;
-    esac
-  fi
-
-case $host_os in
-  # For platforms which do not support PIC, -DPIC is meaningless:
-  *djgpp*)
-    lt_prog_compiler_pic=
-    ;;
-  *)
-    lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC"
-    ;;
-esac
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_prog_compiler_pic" >&5
-$as_echo "$lt_prog_compiler_pic" >&6; }
-
-
-
-
-
-
-#
-# Check to make sure the PIC flag actually works.
-#
-if test -n "$lt_prog_compiler_pic"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5
-$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic works... " >&6; }
-if test "${lt_cv_prog_compiler_pic_works+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  lt_cv_prog_compiler_pic_works=no
-   ac_outfile=conftest.$ac_objext
-   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-   lt_compiler_flag="$lt_prog_compiler_pic -DPIC"
-   # Insert the option either (1) after the last *FLAGS variable, or
-   # (2) before a word containing "conftest.", or (3) at the end.
-   # Note that $ac_compile itself does not contain backslashes and begins
-   # with a dollar sign (not a hyphen), so the echo should work correctly.
-   # The option is referenced via a variable to avoid confusing sed.
-   lt_compile=`echo "$ac_compile" | $SED \
-   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-   -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:8006: $lt_compile\"" >&5)
-   (eval "$lt_compile" 2>conftest.err)
-   ac_status=$?
-   cat conftest.err >&5
-   echo "$as_me:8010: \$? = $ac_status" >&5
-   if (exit $ac_status) && test -s "$ac_outfile"; then
-     # The compiler can only warn and ignore the option if not recognized
-     # So say no if there are warnings other than the usual output.
-     $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
-     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
-       lt_cv_prog_compiler_pic_works=yes
-     fi
-   fi
-   $RM conftest*
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works" >&5
-$as_echo "$lt_cv_prog_compiler_pic_works" >&6; }
-
-if test x"$lt_cv_prog_compiler_pic_works" = xyes; then
-    case $lt_prog_compiler_pic in
-     "" | " "*) ;;
-     *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;;
-     esac
-else
-    lt_prog_compiler_pic=
-     lt_prog_compiler_can_build_shared=no
-fi
-
-fi
-
-
-
-
-
-
-#
-# Check to make sure the static flag actually works.
-#
-wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\"
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5
-$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; }
-if test "${lt_cv_prog_compiler_static_works+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  lt_cv_prog_compiler_static_works=no
-   save_LDFLAGS="$LDFLAGS"
-   LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
-   echo "$lt_simple_link_test_code" > conftest.$ac_ext
-   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
-     # The linker can only warn and ignore the option if not recognized
-     # So say no if there are warnings
-     if test -s conftest.err; then
-       # Append any errors to the config.log.
-       cat conftest.err 1>&5
-       $ECHO "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
-       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-       if diff conftest.exp conftest.er2 >/dev/null; then
-         lt_cv_prog_compiler_static_works=yes
-       fi
-     else
-       lt_cv_prog_compiler_static_works=yes
-     fi
-   fi
-   $RM -r conftest*
-   LDFLAGS="$save_LDFLAGS"
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works" >&5
-$as_echo "$lt_cv_prog_compiler_static_works" >&6; }
-
-if test x"$lt_cv_prog_compiler_static_works" = xyes; then
-    :
-else
-    lt_prog_compiler_static=
-fi
-
-
-
-
-
-
-
-  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
-$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
-if test "${lt_cv_prog_compiler_c_o+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  lt_cv_prog_compiler_c_o=no
-   $RM -r conftest 2>/dev/null
-   mkdir conftest
-   cd conftest
-   mkdir out
-   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-
-   lt_compiler_flag="-o out/conftest2.$ac_objext"
-   # Insert the option either (1) after the last *FLAGS variable, or
-   # (2) before a word containing "conftest.", or (3) at the end.
-   # Note that $ac_compile itself does not contain backslashes and begins
-   # with a dollar sign (not a hyphen), so the echo should work correctly.
-   lt_compile=`echo "$ac_compile" | $SED \
-   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-   -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:8111: $lt_compile\"" >&5)
-   (eval "$lt_compile" 2>out/conftest.err)
-   ac_status=$?
-   cat out/conftest.err >&5
-   echo "$as_me:8115: \$? = $ac_status" >&5
-   if (exit $ac_status) && test -s out/conftest2.$ac_objext
-   then
-     # The compiler can only warn and ignore the option if not recognized
-     # So say no if there are warnings
-     $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
-     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
-     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
-       lt_cv_prog_compiler_c_o=yes
-     fi
-   fi
-   chmod u+w . 2>&5
-   $RM conftest*
-   # SGI C++ compiler will create directory out/ii_files/ for
-   # template instantiation
-   test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
-   $RM out/* && rmdir out
-   cd ..
-   $RM -r conftest
-   $RM conftest*
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5
-$as_echo "$lt_cv_prog_compiler_c_o" >&6; }
-
-
-
-
-
-
-  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
-$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
-if test "${lt_cv_prog_compiler_c_o+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  lt_cv_prog_compiler_c_o=no
-   $RM -r conftest 2>/dev/null
-   mkdir conftest
-   cd conftest
-   mkdir out
-   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-
-   lt_compiler_flag="-o out/conftest2.$ac_objext"
-   # Insert the option either (1) after the last *FLAGS variable, or
-   # (2) before a word containing "conftest.", or (3) at the end.
-   # Note that $ac_compile itself does not contain backslashes and begins
-   # with a dollar sign (not a hyphen), so the echo should work correctly.
-   lt_compile=`echo "$ac_compile" | $SED \
-   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-   -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:8166: $lt_compile\"" >&5)
-   (eval "$lt_compile" 2>out/conftest.err)
-   ac_status=$?
-   cat out/conftest.err >&5
-   echo "$as_me:8170: \$? = $ac_status" >&5
-   if (exit $ac_status) && test -s out/conftest2.$ac_objext
-   then
-     # The compiler can only warn and ignore the option if not recognized
-     # So say no if there are warnings
-     $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
-     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
-     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
-       lt_cv_prog_compiler_c_o=yes
-     fi
-   fi
-   chmod u+w . 2>&5
-   $RM conftest*
-   # SGI C++ compiler will create directory out/ii_files/ for
-   # template instantiation
-   test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
-   $RM out/* && rmdir out
-   cd ..
-   $RM -r conftest
-   $RM conftest*
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5
-$as_echo "$lt_cv_prog_compiler_c_o" >&6; }
-
-
-
-
-hard_links="nottested"
-if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then
-  # do not overwrite the value of need_locks provided by the user
-  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5
-$as_echo_n "checking if we can lock with hard links... " >&6; }
-  hard_links=yes
-  $RM conftest*
-  ln conftest.a conftest.b 2>/dev/null && hard_links=no
-  touch conftest.a
-  ln conftest.a conftest.b 2>&5 || hard_links=no
-  ln conftest.a conftest.b 2>/dev/null && hard_links=no
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5
-$as_echo "$hard_links" >&6; }
-  if test "$hard_links" = no; then
-    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
-$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
-    need_locks=warn
-  fi
-else
-  need_locks=no
-fi
-
-
-
-
-
-
-  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5
-$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; }
-
-  runpath_var=
-  allow_undefined_flag=
-  always_export_symbols=no
-  archive_cmds=
-  archive_expsym_cmds=
-  compiler_needs_object=no
-  enable_shared_with_static_runtimes=no
-  export_dynamic_flag_spec=
-  export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-  hardcode_automatic=no
-  hardcode_direct=no
-  hardcode_direct_absolute=no
-  hardcode_libdir_flag_spec=
-  hardcode_libdir_flag_spec_ld=
-  hardcode_libdir_separator=
-  hardcode_minus_L=no
-  hardcode_shlibpath_var=unsupported
-  inherit_rpath=no
-  link_all_deplibs=unknown
-  module_cmds=
-  module_expsym_cmds=
-  old_archive_from_new_cmds=
-  old_archive_from_expsyms_cmds=
-  thread_safe_flag_spec=
-  whole_archive_flag_spec=
-  # include_expsyms should be a list of space-separated symbols to be *always*
-  # included in the symbol list
-  include_expsyms=
-  # exclude_expsyms can be an extended regexp of symbols to exclude
-  # it will be wrapped by ` (' and `)$', so one must not match beginning or
-  # end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
-  # as well as any symbol that contains `d'.
-  exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'
-  # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
-  # platforms (ab)use it in PIC code, but their linkers get confused if
-  # the symbol is explicitly referenced.  Since portable code cannot
-  # rely on this symbol name, it's probably fine to never include it in
-  # preloaded symbol tables.
-  # Exclude shared library initialization/finalization symbols.
-  extract_expsyms_cmds=
-
-  case $host_os in
-  cygwin* | mingw* | pw32* | cegcc*)
-    # FIXME: the MSVC++ port hasn't been tested in a loooong time
-    # When not using gcc, we currently assume that we are using
-    # Microsoft Visual C++.
-    if test "$GCC" != yes; then
-      with_gnu_ld=no
-    fi
-    ;;
-  interix*)
-    # we just hope/assume this is gcc and not c89 (= MSVC++)
-    with_gnu_ld=yes
-    ;;
-  openbsd*)
-    with_gnu_ld=no
-    ;;
-  linux* | k*bsd*-gnu)
-    link_all_deplibs=no
-    ;;
-  esac
-
-  ld_shlibs=yes
-  if test "$with_gnu_ld" = yes; then
-    # If archive_cmds runs LD, not CC, wlarc should be empty
-    wlarc='${wl}'
-
-    # Set some defaults for GNU ld with shared library support. These
-    # are reset later if shared libraries are not supported. Putting them
-    # here allows them to be overridden if necessary.
-    runpath_var=LD_RUN_PATH
-    hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-    export_dynamic_flag_spec='${wl}--export-dynamic'
-    # ancient GNU ld didn't support --whole-archive et. al.
-    if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then
-      whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-    else
-      whole_archive_flag_spec=
-    fi
-    supports_anon_versioning=no
-    case `$LD -v 2>&1` in
-      *GNU\ gold*) supports_anon_versioning=yes ;;
-      *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
-      *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
-      *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
-      *\ 2.11.*) ;; # other 2.11 versions
-      *) supports_anon_versioning=yes ;;
-    esac
-
-    # See if GNU ld supports shared libraries.
-    case $host_os in
-    aix[3-9]*)
-      # On AIX/PPC, the GNU linker is very broken
-      if test "$host_cpu" != ia64; then
-        ld_shlibs=no
-        cat <<_LT_EOF 1>&2
-
-*** Warning: the GNU linker, at least up to release 2.9.1, is reported
-*** to be unable to reliably create shared libraries on AIX.
-*** Therefore, libtool is disabling shared libraries support.  If you
-*** really care for shared libraries, you may want to modify your PATH
-*** so that a non-GNU linker is found, and then restart.
-
-_LT_EOF
-      fi
-      ;;
-
-    amigaos*)
-      case $host_cpu in
-      powerpc)
-            # see comment about AmigaOS4 .so support
-            archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-            archive_expsym_cmds=''
-        ;;
-      m68k)
-            archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-            hardcode_libdir_flag_spec='-L$libdir'
-            hardcode_minus_L=yes
-        ;;
-      esac
-      ;;
-
-    beos*)
-      if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
-        allow_undefined_flag=unsupported
-        # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
-        # support --undefined.  This deserves some investigation.  FIXME
-        archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-      else
-        ld_shlibs=no
-      fi
-      ;;
-
-    cygwin* | mingw* | pw32* | cegcc*)
-      # _LT_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless,
-      # as there is no search path for DLLs.
-      hardcode_libdir_flag_spec='-L$libdir'
-      allow_undefined_flag=unsupported
-      always_export_symbols=no
-      enable_shared_with_static_runtimes=yes
-      export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
-
-      if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
-        archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-        # If the export-symbols file already is a .def file (1st line
-        # is EXPORTS), use it as is; otherwise, prepend...
-        archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-          cp $export_symbols $output_objdir/$soname.def;
-        else
-          echo EXPORTS > $output_objdir/$soname.def;
-          cat $export_symbols >> $output_objdir/$soname.def;
-        fi~
-        $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-      else
-        ld_shlibs=no
-      fi
-      ;;
-
-    interix[3-9]*)
-      hardcode_direct=no
-      hardcode_shlibpath_var=no
-      hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
-      export_dynamic_flag_spec='${wl}-E'
-      # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
-      # Instead, shared libraries are loaded at an image base (0x10000000 by
-      # default) and relocated if they conflict, which is a slow very memory
-      # consuming and fragmenting process.  To avoid this, we pick a random,
-      # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
-      # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
-      archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-      archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-      ;;
-
-    gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu)
-      tmp_diet=no
-      if test "$host_os" = linux-dietlibc; then
-        case $cc_basename in
-          diet\ *) tmp_diet=yes;;       # linux-dietlibc with static linking (!diet-dyn)
-        esac
-      fi
-      if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
-         && test "$tmp_diet" = no
-      then
-        tmp_addflag=
-        tmp_sharedflag='-shared'
-        case $cc_basename,$host_cpu in
-        pgcc*)                          # Portland Group C compiler
-          whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
-          tmp_addflag=' $pic_flag'
-          ;;
-        pgf77* | pgf90* | pgf95*)       # Portland Group f77 and f90 compilers
-          whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
-          tmp_addflag=' $pic_flag -Mnomain' ;;
-        ecc*,ia64* | icc*,ia64*)        # Intel C compiler on ia64
-          tmp_addflag=' -i_dynamic' ;;
-        efc*,ia64* | ifort*,ia64*)      # Intel Fortran compiler on ia64
-          tmp_addflag=' -i_dynamic -nofor_main' ;;
-        ifc* | ifort*)                  # Intel Fortran compiler
-          tmp_addflag=' -nofor_main' ;;
-        lf95*)                          # Lahey Fortran 8.1
-          whole_archive_flag_spec=
-          tmp_sharedflag='--shared' ;;
-        xl[cC]*)                        # IBM XL C 8.0 on PPC (deal with xlf below)
-          tmp_sharedflag='-qmkshrobj'
-          tmp_addflag= ;;
-        esac
-        case `$CC -V 2>&1 | sed 5q` in
-        *Sun\ C*)                       # Sun C 5.9
-          whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
-          compiler_needs_object=yes
-          tmp_sharedflag='-G' ;;
-        *Sun\ F*)                       # Sun Fortran 8.3
-          tmp_sharedflag='-G' ;;
-        esac
-        archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-
-        if test "x$supports_anon_versioning" = xyes; then
-          archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
-            cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
-            echo "local: *; };" >> $output_objdir/$libname.ver~
-            $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
-        fi
-
-        case $cc_basename in
-        xlf*)
-          # IBM XL Fortran 10.1 on PPC cannot create shared libs itself
-          whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive'
-          hardcode_libdir_flag_spec=
-          hardcode_libdir_flag_spec_ld='-rpath $libdir'
-          archive_cmds='$LD -shared $libobjs $deplibs $compiler_flags -soname $soname -o $lib'
-          if test "x$supports_anon_versioning" = xyes; then
-            archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
-              cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
-              echo "local: *; };" >> $output_objdir/$libname.ver~
-              $LD -shared $libobjs $deplibs $compiler_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
-          fi
-          ;;
-        esac
-      else
-        ld_shlibs=no
-      fi
-      ;;
-
-    netbsd* | netbsdelf*-gnu)
-      if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
-        archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
-        wlarc=
-      else
-        archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-        archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-      fi
-      ;;
-
-    solaris*)
-      if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then
-        ld_shlibs=no
-        cat <<_LT_EOF 1>&2
-
-*** Warning: The releases 2.8.* of the GNU linker cannot reliably
-*** create shared libraries on Solaris systems.  Therefore, libtool
-*** is disabling shared libraries support.  We urge you to upgrade GNU
-*** binutils to release 2.9.1 or newer.  Another option is to modify
-*** your PATH or compiler configuration so that the native linker is
-*** used, and then restart.
-
-_LT_EOF
-      elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
-        archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-        archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-      else
-        ld_shlibs=no
-      fi
-      ;;
-
-    sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
-      case `$LD -v 2>&1` in
-        *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
-        ld_shlibs=no
-        cat <<_LT_EOF 1>&2
-
-*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
-*** reliably create shared libraries on SCO systems.  Therefore, libtool
-*** is disabling shared libraries support.  We urge you to upgrade GNU
-*** binutils to release 2.16.91.0.3 or newer.  Another option is to modify
-*** your PATH or compiler configuration so that the native linker is
-*** used, and then restart.
-
-_LT_EOF
-        ;;
-        *)
-          # For security reasons, it is highly recommended that you always
-          # use absolute paths for naming shared libraries, and exclude the
-          # DT_RUNPATH tag from executables and libraries.  But doing so
-          # requires that you compile everything twice, which is a pain.
-          if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
-            hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-            archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-            archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-          else
-            ld_shlibs=no
-          fi
-        ;;
-      esac
-      ;;
-
-    sunos4*)
-      archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-      wlarc=
-      hardcode_direct=yes
-      hardcode_shlibpath_var=no
-      ;;
-
-    *)
-      if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
-        archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-        archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-      else
-        ld_shlibs=no
-      fi
-      ;;
-    esac
-
-    if test "$ld_shlibs" = no; then
-      runpath_var=
-      hardcode_libdir_flag_spec=
-      export_dynamic_flag_spec=
-      whole_archive_flag_spec=
-    fi
-  else
-    # PORTME fill in a description of your system's linker (not GNU ld)
-    case $host_os in
-    aix3*)
-      allow_undefined_flag=unsupported
-      always_export_symbols=yes
-      archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
-      # Note: this linker hardcodes the directories in LIBPATH if there
-      # are no directories specified by -L.
-      hardcode_minus_L=yes
-      if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
-        # Neither direct hardcoding nor static linking is supported with a
-        # broken collect2.
-        hardcode_direct=unsupported
-      fi
-      ;;
-
-    aix[4-9]*)
-      if test "$host_cpu" = ia64; then
-        # On IA64, the linker does run time linking by default, so we don't
-        # have to do anything special.
-        aix_use_runtimelinking=no
-        exp_sym_flag='-Bexport'
-        no_entry_flag=""
-      else
-        # If we're using GNU nm, then we don't want the "-C" option.
-        # -C means demangle to AIX nm, but means don't demangle with GNU nm
-        if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
-          export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
-        else
-          export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
-        fi
-        aix_use_runtimelinking=no
-
-        # Test if we are trying to use run time linking or normal
-        # AIX style linking. If -brtl is somewhere in LDFLAGS, we
-        # need to do runtime linking.
-        case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
-          for ld_flag in $LDFLAGS; do
-          if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
-            aix_use_runtimelinking=yes
-            break
-          fi
-          done
-          ;;
-        esac
-
-        exp_sym_flag='-bexport'
-        no_entry_flag='-bnoentry'
-      fi
-
-      # When large executables or shared objects are built, AIX ld can
-      # have problems creating the table of contents.  If linking a library
-      # or program results in "error TOC overflow" add -mminimal-toc to
-      # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
-      # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
-
-      archive_cmds=''
-      hardcode_direct=yes
-      hardcode_direct_absolute=yes
-      hardcode_libdir_separator=':'
-      link_all_deplibs=yes
-      file_list_spec='${wl}-f,'
-
-      if test "$GCC" = yes; then
-        case $host_os in aix4.[012]|aix4.[012].*)
-        # We only want to do this on AIX 4.2 and lower, the check
-        # below for broken collect2 doesn't work under 4.3+
-          collect2name=`${CC} -print-prog-name=collect2`
-          if test -f "$collect2name" &&
-           strings "$collect2name" | $GREP resolve_lib_name >/dev/null
-          then
-          # We have reworked collect2
-          :
-          else
-          # We have old collect2
-          hardcode_direct=unsupported
-          # It fails to find uninstalled libraries when the uninstalled
-          # path is not listed in the libpath.  Setting hardcode_minus_L
-          # to unsupported forces relinking
-          hardcode_minus_L=yes
-          hardcode_libdir_flag_spec='-L$libdir'
-          hardcode_libdir_separator=
-          fi
-          ;;
-        esac
-        shared_flag='-shared'
-        if test "$aix_use_runtimelinking" = yes; then
-          shared_flag="$shared_flag "'${wl}-G'
-        fi
-        link_all_deplibs=no
-      else
-        # not using gcc
-        if test "$host_cpu" = ia64; then
-        # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
-        # chokes on -Wl,-G. The following line is correct:
-          shared_flag='-G'
-        else
-          if test "$aix_use_runtimelinking" = yes; then
-            shared_flag='${wl}-G'
-          else
-            shared_flag='${wl}-bM:SRE'
-          fi
-        fi
-      fi
-
-      export_dynamic_flag_spec='${wl}-bexpall'
-      # It seems that -bexpall does not export symbols beginning with
-      # underscore (_), so it is better to generate a list of symbols to export.
-      always_export_symbols=yes
-      if test "$aix_use_runtimelinking" = yes; then
-        # Warning - without using the other runtime loading flags (-brtl),
-        # -berok will link without error, but may produce a broken library.
-        allow_undefined_flag='-berok'
-        # Determine the default libpath from the value encoded in an
-        # empty executable.
-        cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
-
-lt_aix_libpath_sed='
-    /Import File Strings/,/^$/ {
-        /^0/ {
-            s/^0  *\(.*\)$/\1/
-            p
-        }
-    }'
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-# Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then
-  aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-fi
-fi
-rm -f core conftest.err conftest.$ac_objext \
-    conftest$ac_exeext conftest.$ac_ext
-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-
-        hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
-        archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
-      else
-        if test "$host_cpu" = ia64; then
-          hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
-          allow_undefined_flag="-z nodefs"
-          archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
-        else
-         # Determine the default libpath from the value encoded in an
-         # empty executable.
-         cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
-
-lt_aix_libpath_sed='
-    /Import File Strings/,/^$/ {
-        /^0/ {
-            s/^0  *\(.*\)$/\1/
-            p
-        }
-    }'
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-# Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then
-  aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-fi
-fi
-rm -f core conftest.err conftest.$ac_objext \
-    conftest$ac_exeext conftest.$ac_ext
-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-
-         hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
-          # Warning - without using the other run time loading flags,
-          # -berok will link without error, but may produce a broken library.
-          no_undefined_flag=' ${wl}-bernotok'
-          allow_undefined_flag=' ${wl}-berok'
-          # Exported symbols can be pulled into shared objects from archives
-          whole_archive_flag_spec='$convenience'
-          archive_cmds_need_lc=yes
-          # This is similar to how AIX traditionally builds its shared libraries.
-          archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
-        fi
-      fi
-      ;;
-
-    amigaos*)
-      case $host_cpu in
-      powerpc)
-            # see comment about AmigaOS4 .so support
-            archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-            archive_expsym_cmds=''
-        ;;
-      m68k)
-            archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-            hardcode_libdir_flag_spec='-L$libdir'
-            hardcode_minus_L=yes
-        ;;
-      esac
-      ;;
-
-    bsdi[45]*)
-      export_dynamic_flag_spec=-rdynamic
-      ;;
-
-    cygwin* | mingw* | pw32* | cegcc*)
-      # When not using gcc, we currently assume that we are using
-      # Microsoft Visual C++.
-      # hardcode_libdir_flag_spec is actually meaningless, as there is
-      # no search path for DLLs.
-      hardcode_libdir_flag_spec=' '
-      allow_undefined_flag=unsupported
-      # Tell ltmain to make .lib files, not .a files.
-      libext=lib
-      # Tell ltmain to make .dll files, not .so files.
-      shrext_cmds=".dll"
-      # FIXME: Setting linknames here is a bad hack.
-      archive_cmds='$CC -o $lib $libobjs $compiler_flags `$ECHO "X$deplibs" | $Xsed -e '\''s/ -lc$//'\''` -link -dll~linknames='
-      # The linker will automatically build a .lib file if we build a DLL.
-      old_archive_from_new_cmds='true'
-      # FIXME: Should let the user specify the lib program.
-      old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs'
-      fix_srcfile_path='`cygpath -w "$srcfile"`'
-      enable_shared_with_static_runtimes=yes
-      ;;
-
-    darwin* | rhapsody*)
-
-
-  archive_cmds_need_lc=no
-  hardcode_direct=no
-  hardcode_automatic=yes
-  hardcode_shlibpath_var=unsupported
-  whole_archive_flag_spec=''
-  link_all_deplibs=yes
-  allow_undefined_flag="$_lt_dar_allow_undefined"
-  case $cc_basename in
-     ifort*) _lt_dar_can_shared=yes ;;
-     *) _lt_dar_can_shared=$GCC ;;
-  esac
-  if test "$_lt_dar_can_shared" = "yes"; then
-    output_verbose_link_cmd=echo
-    archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
-    module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
-    archive_expsym_cmds="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
-    module_expsym_cmds="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
-
-  else
-  ld_shlibs=no
-  fi
-
-      ;;
-
-    dgux*)
-      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      hardcode_libdir_flag_spec='-L$libdir'
-      hardcode_shlibpath_var=no
-      ;;
-
-    freebsd1*)
-      ld_shlibs=no
-      ;;
-
-    # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
-    # support.  Future versions do this automatically, but an explicit c++rt0.o
-    # does not break anything, and helps significantly (at the cost of a little
-    # extra space).
-    freebsd2.2*)
-      archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
-      hardcode_libdir_flag_spec='-R$libdir'
-      hardcode_direct=yes
-      hardcode_shlibpath_var=no
-      ;;
-
-    # Unfortunately, older versions of FreeBSD 2 do not have this feature.
-    freebsd2*)
-      archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-      hardcode_direct=yes
-      hardcode_minus_L=yes
-      hardcode_shlibpath_var=no
-      ;;
-
-    # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
-    freebsd* | dragonfly*)
-      archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
-      hardcode_libdir_flag_spec='-R$libdir'
-      hardcode_direct=yes
-      hardcode_shlibpath_var=no
-      ;;
-
-    hpux9*)
-      if test "$GCC" = yes; then
-        archive_cmds='$RM $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-      else
-        archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-      fi
-      hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
-      hardcode_libdir_separator=:
-      hardcode_direct=yes
-
-      # hardcode_minus_L: Not really in the search PATH,
-      # but as the default location of the library.
-      hardcode_minus_L=yes
-      export_dynamic_flag_spec='${wl}-E'
-      ;;
-
-    hpux10*)
-      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
-        archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-      else
-        archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
-      fi
-      if test "$with_gnu_ld" = no; then
-        hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
-        hardcode_libdir_flag_spec_ld='+b $libdir'
-        hardcode_libdir_separator=:
-        hardcode_direct=yes
-        hardcode_direct_absolute=yes
-        export_dynamic_flag_spec='${wl}-E'
-        # hardcode_minus_L: Not really in the search PATH,
-        # but as the default location of the library.
-        hardcode_minus_L=yes
-      fi
-      ;;
-
-    hpux11*)
-      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
-        case $host_cpu in
-        hppa*64*)
-          archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-          ;;
-        ia64*)
-          archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
-          ;;
-        *)
-          archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-          ;;
-        esac
-      else
-        case $host_cpu in
-        hppa*64*)
-          archive_cmds='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-          ;;
-        ia64*)
-          archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
-          ;;
-        *)
-          archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-          ;;
-        esac
-      fi
-      if test "$with_gnu_ld" = no; then
-        hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
-        hardcode_libdir_separator=:
-
-        case $host_cpu in
-        hppa*64*|ia64*)
-          hardcode_direct=no
-          hardcode_shlibpath_var=no
-          ;;
-        *)
-          hardcode_direct=yes
-          hardcode_direct_absolute=yes
-          export_dynamic_flag_spec='${wl}-E'
-
-          # hardcode_minus_L: Not really in the search PATH,
-          # but as the default location of the library.
-          hardcode_minus_L=yes
-          ;;
-        esac
-      fi
-      ;;
-
-    irix5* | irix6* | nonstopux*)
-      if test "$GCC" = yes; then
-        archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-        # Try to use the -exported_symbol ld option, if it does not
-        # work, assume that -exports_file does not work either and
-        # implicitly export all symbols.
-        save_LDFLAGS="$LDFLAGS"
-        LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
-        cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-int foo(void) {}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
-  archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
-
-fi
-rm -f core conftest.err conftest.$ac_objext \
-    conftest$ac_exeext conftest.$ac_ext
-        LDFLAGS="$save_LDFLAGS"
-      else
-        archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
-        archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
-      fi
-      archive_cmds_need_lc='no'
-      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-      hardcode_libdir_separator=:
-      inherit_rpath=yes
-      link_all_deplibs=yes
-      ;;
-
-    netbsd* | netbsdelf*-gnu)
-      if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
-        archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
-      else
-        archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
-      fi
-      hardcode_libdir_flag_spec='-R$libdir'
-      hardcode_direct=yes
-      hardcode_shlibpath_var=no
-      ;;
-
-    newsos6)
-      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      hardcode_direct=yes
-      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-      hardcode_libdir_separator=:
-      hardcode_shlibpath_var=no
-      ;;
-
-    *nto* | *qnx*)
-      ;;
-
-    openbsd*)
-      if test -f /usr/libexec/ld.so; then
-        hardcode_direct=yes
-        hardcode_shlibpath_var=no
-        hardcode_direct_absolute=yes
-        if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-          archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-          archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
-          hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
-          export_dynamic_flag_spec='${wl}-E'
-        else
-          case $host_os in
-           openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
-             archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-             hardcode_libdir_flag_spec='-R$libdir'
-             ;;
-           *)
-             archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-             hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
-             ;;
-          esac
-        fi
-      else
-        ld_shlibs=no
-      fi
-      ;;
-
-    os2*)
-      hardcode_libdir_flag_spec='-L$libdir'
-      hardcode_minus_L=yes
-      allow_undefined_flag=unsupported
-      archive_cmds='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$ECHO DATA >> $output_objdir/$libname.def~$ECHO " SINGLE NONSHARED" >> $output_objdir/$libname.def~$ECHO EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
-      old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
-      ;;
-
-    osf3*)
-      if test "$GCC" = yes; then
-        allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
-        archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-      else
-        allow_undefined_flag=' -expect_unresolved \*'
-        archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
-      fi
-      archive_cmds_need_lc='no'
-      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-      hardcode_libdir_separator=:
-      ;;
-
-    osf4* | osf5*)      # as osf3* with the addition of -msym flag
-      if test "$GCC" = yes; then
-        allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
-        archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-        hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-      else
-        allow_undefined_flag=' -expect_unresolved \*'
-        archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
-        archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
-        $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
-
-        # Both c and cxx compiler support -rpath directly
-        hardcode_libdir_flag_spec='-rpath $libdir'
-      fi
-      archive_cmds_need_lc='no'
-      hardcode_libdir_separator=:
-      ;;
-
-    solaris*)
-      no_undefined_flag=' -z defs'
-      if test "$GCC" = yes; then
-        wlarc='${wl}'
-        archive_cmds='$CC -shared ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-        archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
-          $CC -shared ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
-      else
-        case `$CC -V 2>&1` in
-        *"Compilers 5.0"*)
-          wlarc=''
-          archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
-          archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
-          $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
-          ;;
-        *)
-          wlarc='${wl}'
-          archive_cmds='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags'
-          archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
-          $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
-          ;;
-        esac
-      fi
-      hardcode_libdir_flag_spec='-R$libdir'
-      hardcode_shlibpath_var=no
-      case $host_os in
-      solaris2.[0-5] | solaris2.[0-5].*) ;;
-      *)
-        # The compiler driver will combine and reorder linker options,
-        # but understands `-z linker_flag'.  GCC discards it without `$wl',
-        # but is careful enough not to reorder.
-        # Supported since Solaris 2.6 (maybe 2.5.1?)
-        if test "$GCC" = yes; then
-          whole_archive_flag_spec='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
-        else
-          whole_archive_flag_spec='-z allextract$convenience -z defaultextract'
-        fi
-        ;;
-      esac
-      link_all_deplibs=yes
-      ;;
-
-    sunos4*)
-      if test "x$host_vendor" = xsequent; then
-        # Use $CC to link under sequent, because it throws in some extra .o
-        # files that make .init and .fini sections work.
-        archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
-      else
-        archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
-      fi
-      hardcode_libdir_flag_spec='-L$libdir'
-      hardcode_direct=yes
-      hardcode_minus_L=yes
-      hardcode_shlibpath_var=no
-      ;;
-
-    sysv4)
-      case $host_vendor in
-        sni)
-          archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-          hardcode_direct=yes # is this really true???
-        ;;
-        siemens)
-          ## LD is ld it makes a PLAMLIB
-          ## CC just makes a GrossModule.
-          archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags'
-          reload_cmds='$CC -r -o $output$reload_objs'
-          hardcode_direct=no
-        ;;
-        motorola)
-          archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-          hardcode_direct=no #Motorola manual says yes, but my tests say they lie
-        ;;
-      esac
-      runpath_var='LD_RUN_PATH'
-      hardcode_shlibpath_var=no
-      ;;
-
-    sysv4.3*)
-      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      hardcode_shlibpath_var=no
-      export_dynamic_flag_spec='-Bexport'
-      ;;
-
-    sysv4*MP*)
-      if test -d /usr/nec; then
-        archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-        hardcode_shlibpath_var=no
-        runpath_var=LD_RUN_PATH
-        hardcode_runpath_var=yes
-        ld_shlibs=yes
-      fi
-      ;;
-
-    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
-      no_undefined_flag='${wl}-z,text'
-      archive_cmds_need_lc=no
-      hardcode_shlibpath_var=no
-      runpath_var='LD_RUN_PATH'
-
-      if test "$GCC" = yes; then
-        archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-        archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-      else
-        archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-        archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-      fi
-      ;;
-
-    sysv5* | sco3.2v5* | sco5v6*)
-      # Note: We can NOT use -z defs as we might desire, because we do not
-      # link with -lc, and that would cause any symbols used from libc to
-      # always be unresolved, which means just about no library would
-      # ever link correctly.  If we're not using GNU ld we use -z text
-      # though, which does catch some bad symbols but isn't as heavy-handed
-      # as -z defs.
-      no_undefined_flag='${wl}-z,text'
-      allow_undefined_flag='${wl}-z,nodefs'
-      archive_cmds_need_lc=no
-      hardcode_shlibpath_var=no
-      hardcode_libdir_flag_spec='${wl}-R,$libdir'
-      hardcode_libdir_separator=':'
-      link_all_deplibs=yes
-      export_dynamic_flag_spec='${wl}-Bexport'
-      runpath_var='LD_RUN_PATH'
-
-      if test "$GCC" = yes; then
-        archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-        archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-      else
-        archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-        archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-      fi
-      ;;
-
-    uts4*)
-      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      hardcode_libdir_flag_spec='-L$libdir'
-      hardcode_shlibpath_var=no
-      ;;
-
-    *)
-      ld_shlibs=no
-      ;;
-    esac
-
-    if test x$host_vendor = xsni; then
-      case $host in
-      sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
-        export_dynamic_flag_spec='${wl}-Blargedynsym'
-        ;;
-      esac
-    fi
-  fi
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs" >&5
-$as_echo "$ld_shlibs" >&6; }
-test "$ld_shlibs" = no && can_build_shared=no
-
-with_gnu_ld=$with_gnu_ld
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-#
-# Do we need to explicitly link libc?
-#
-case "x$archive_cmds_need_lc" in
-x|xyes)
-  # Assume -lc should be added
-  archive_cmds_need_lc=yes
-
-  if test "$enable_shared" = yes && test "$GCC" = yes; then
-    case $archive_cmds in
-    *'~'*)
-      # FIXME: we may have to deal with multi-command sequences.
-      ;;
-    '$CC '*)
-      # Test whether the compiler implicitly links with -lc since on some
-      # systems, -lgcc has to come before -lc. If gcc already passes -lc
-      # to ld, don't add -lc before -lgcc.
-      { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5
-$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; }
-      $RM conftest*
-      echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-
-      if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; } 2>conftest.err; then
-        soname=conftest
-        lib=conftest
-        libobjs=conftest.$ac_objext
-        deplibs=
-        wl=$lt_prog_compiler_wl
-        pic_flag=$lt_prog_compiler_pic
-        compiler_flags=-v
-        linker_flags=-v
-        verstring=
-        output_objdir=.
-        libname=conftest
-        lt_save_allow_undefined_flag=$allow_undefined_flag
-        allow_undefined_flag=
-        if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5
-  (eval $archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5
-  ac_status=$?
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; }
-        then
-          archive_cmds_need_lc=no
-        else
-          archive_cmds_need_lc=yes
-        fi
-        allow_undefined_flag=$lt_save_allow_undefined_flag
-      else
-        cat conftest.err 1>&5
-      fi
-      $RM conftest*
-      { $as_echo "$as_me:${as_lineno-$LINENO}: result: $archive_cmds_need_lc" >&5
-$as_echo "$archive_cmds_need_lc" >&6; }
-      ;;
-    esac
-  fi
-  ;;
-esac
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-  { $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5
-$as_echo_n "checking dynamic linker characteristics... " >&6; }
-
-if test "$GCC" = yes; then
-  case $host_os in
-    darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
-    *) lt_awk_arg="/^libraries:/" ;;
-  esac
-  lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-  if $ECHO "$lt_search_path_spec" | $GREP ';' >/dev/null ; then
-    # if the path contains ";" then we assume it to be the separator
-    # otherwise default to the standard path separator (i.e. ":") - it is
-    # assumed that no part of a normal pathname contains ";" but that should
-    # okay in the real world where ";" in dirpaths is itself problematic.
-    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e 's/;/ /g'`
-  else
-    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
-  fi
-  # Ok, now we have the path, separated by spaces, we can step through it
-  # and add multilib dir if necessary.
-  lt_tmp_lt_search_path_spec=
-  lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
-  for lt_sys_path in $lt_search_path_spec; do
-    if test -d "$lt_sys_path/$lt_multi_os_dir"; then
-      lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir"
-    else
-      test -d "$lt_sys_path" && \
-        lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
-    fi
-  done
-  lt_search_path_spec=`$ECHO $lt_tmp_lt_search_path_spec | awk '
-BEGIN {RS=" "; FS="/|\n";} {
-  lt_foo="";
-  lt_count=0;
-  for (lt_i = NF; lt_i > 0; lt_i--) {
-    if ($lt_i != "" && $lt_i != ".") {
-      if ($lt_i == "..") {
-        lt_count++;
-      } else {
-        if (lt_count == 0) {
-          lt_foo="/" $lt_i lt_foo;
-        } else {
-          lt_count--;
-        }
-      }
-    }
-  }
-  if (lt_foo != "") { lt_freq[lt_foo]++; }
-  if (lt_freq[lt_foo] == 1) { print lt_foo; }
-}'`
-  sys_lib_search_path_spec=`$ECHO $lt_search_path_spec`
-else
-  sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
-fi
-library_names_spec=
-libname_spec='lib$name'
-soname_spec=
-shrext_cmds=".so"
-postinstall_cmds=
-postuninstall_cmds=
-finish_cmds=
-finish_eval=
-shlibpath_var=
-shlibpath_overrides_runpath=unknown
-version_type=none
-dynamic_linker="$host_os ld.so"
-sys_lib_dlsearch_path_spec="/lib /usr/lib"
-need_lib_prefix=unknown
-hardcode_into_libs=no
-
-# when you set need_version to no, make sure it does not cause -set_version
-# flags to be left without arguments
-need_version=unknown
-
-case $host_os in
-aix3*)
-  version_type=linux
-  library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
-  shlibpath_var=LIBPATH
-
-  # AIX 3 has no versioning support, so we append a major version to the name.
-  soname_spec='${libname}${release}${shared_ext}$major'
-  ;;
-
-aix[4-9]*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  hardcode_into_libs=yes
-  if test "$host_cpu" = ia64; then
-    # AIX 5 supports IA64
-    library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
-    shlibpath_var=LD_LIBRARY_PATH
-  else
-    # With GCC up to 2.95.x, collect2 would create an import file
-    # for dependence libraries.  The import file would start with
-    # the line `#! .'.  This would cause the generated library to
-    # depend on `.', always an invalid library.  This was fixed in
-    # development snapshots of GCC prior to 3.0.
-    case $host_os in
-      aix4 | aix4.[01] | aix4.[01].*)
-      if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
-           echo ' yes '
-           echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then
-        :
-      else
-        can_build_shared=no
-      fi
-      ;;
-    esac
-    # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
-    # soname into executable. Probably we can add versioning support to
-    # collect2, so additional links can be useful in future.
-    if test "$aix_use_runtimelinking" = yes; then
-      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
-      # instead of lib<name>.a to let people know that these are not
-      # typical AIX shared libraries.
-      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    else
-      # We preserve .a as extension for shared libraries through AIX4.2
-      # and later when we are not doing run time linking.
-      library_names_spec='${libname}${release}.a $libname.a'
-      soname_spec='${libname}${release}${shared_ext}$major'
-    fi
-    shlibpath_var=LIBPATH
-  fi
-  ;;
-
-amigaos*)
-  case $host_cpu in
-  powerpc)
-    # Since July 2007 AmigaOS4 officially supports .so libraries.
-    # When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    ;;
-  m68k)
-    library_names_spec='$libname.ixlibrary $libname.a'
-    # Create ${libname}_ixlibrary.a entries in /sys/libs.
-    finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$ECHO "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
-    ;;
-  esac
-  ;;
-
-beos*)
-  library_names_spec='${libname}${shared_ext}'
-  dynamic_linker="$host_os ld.so"
-  shlibpath_var=LIBRARY_PATH
-  ;;
-
-bsdi[45]*)
-  version_type=linux
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
-  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
-  # the default ld.so.conf also contains /usr/contrib/lib and
-  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
-  # libtool to hard-code these into programs
-  ;;
-
-cygwin* | mingw* | pw32* | cegcc*)
-  version_type=windows
-  shrext_cmds=".dll"
-  need_version=no
-  need_lib_prefix=no
-
-  case $GCC,$host_os in
-  yes,cygwin* | yes,mingw* | yes,pw32* | yes,cegcc*)
-    library_names_spec='$libname.dll.a'
-    # DLL is installed to $(libdir)/../bin by postinstall_cmds
-    postinstall_cmds='base_file=`basename \${file}`~
-      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
-      dldir=$destdir/`dirname \$dlpath`~
-      test -d \$dldir || mkdir -p \$dldir~
-      $install_prog $dir/$dlname \$dldir/$dlname~
-      chmod a+x \$dldir/$dlname~
-      if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
-        eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
-      fi'
-    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
-      dlpath=$dir/\$dldll~
-       $RM \$dlpath'
-    shlibpath_overrides_runpath=yes
-
-    case $host_os in
-    cygwin*)
-      # Cygwin DLLs use 'cyg' prefix rather than 'lib'
-      soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-      sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
-      ;;
-    mingw* | cegcc*)
-      # MinGW DLLs use traditional 'lib' prefix
-      soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-      sys_lib_search_path_spec=`$CC -print-search-dirs | $GREP "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-      if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then
-        # It is most probably a Windows format PATH printed by
-        # mingw gcc, but we are running on Cygwin. Gcc prints its search
-        # path with ; separators, and with drive letters. We can handle the
-        # drive letters (cygwin fileutils understands them), so leave them,
-        # especially as we might pass files found there to a mingw objdump,
-        # which wouldn't understand a cygwinified path. Ahh.
-        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
-      else
-        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
-      fi
-      ;;
-    pw32*)
-      # pw32 DLLs use 'pw' prefix rather than 'lib'
-      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-      ;;
-    esac
-    ;;
-
-  *)
-    library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
-    ;;
-  esac
-  dynamic_linker='Win32 ld.exe'
-  # FIXME: first we should search . and the directory the executable is in
-  shlibpath_var=PATH
-  ;;
-
-darwin* | rhapsody*)
-  dynamic_linker="$host_os dyld"
-  version_type=darwin
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext'
-  soname_spec='${libname}${release}${major}$shared_ext'
-  shlibpath_overrides_runpath=yes
-  shlibpath_var=DYLD_LIBRARY_PATH
-  shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
-
-  sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"
-  sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
-  ;;
-
-dgux*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  ;;
-
-freebsd1*)
-  dynamic_linker=no
-  ;;
-
-freebsd* | dragonfly*)
-  # DragonFly does not have aout.  When/if they implement a new
-  # versioning mechanism, adjust this.
-  if test -x /usr/bin/objformat; then
-    objformat=`/usr/bin/objformat`
-  else
-    case $host_os in
-    freebsd[123]*) objformat=aout ;;
-    *) objformat=elf ;;
-    esac
-  fi
-  version_type=freebsd-$objformat
-  case $version_type in
-    freebsd-elf*)
-      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
-      need_version=no
-      need_lib_prefix=no
-      ;;
-    freebsd-*)
-      library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
-      need_version=yes
-      ;;
-  esac
-  shlibpath_var=LD_LIBRARY_PATH
-  case $host_os in
-  freebsd2*)
-    shlibpath_overrides_runpath=yes
-    ;;
-  freebsd3.[01]* | freebsdelf3.[01]*)
-    shlibpath_overrides_runpath=yes
-    hardcode_into_libs=yes
-    ;;
-  freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
-  freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
-    shlibpath_overrides_runpath=no
-    hardcode_into_libs=yes
-    ;;
-  *) # from 4.6 on, and DragonFly
-    shlibpath_overrides_runpath=yes
-    hardcode_into_libs=yes
-    ;;
-  esac
-  ;;
-
-gnu*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  hardcode_into_libs=yes
-  ;;
-
-hpux9* | hpux10* | hpux11*)
-  # Give a soname corresponding to the major version so that dld.sl refuses to
-  # link against other versions.
-  version_type=sunos
-  need_lib_prefix=no
-  need_version=no
-  case $host_cpu in
-  ia64*)
-    shrext_cmds='.so'
-    hardcode_into_libs=yes
-    dynamic_linker="$host_os dld.so"
-    shlibpath_var=LD_LIBRARY_PATH
-    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
-    if test "X$HPUX_IA64_MODE" = X32; then
-      sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
-    else
-      sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
-    fi
-    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-    ;;
-  hppa*64*)
-    shrext_cmds='.sl'
-    hardcode_into_libs=yes
-    dynamic_linker="$host_os dld.sl"
-    shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
-    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
-    sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
-    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-    ;;
-  *)
-    shrext_cmds='.sl'
-    dynamic_linker="$host_os dld.sl"
-    shlibpath_var=SHLIB_PATH
-    shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
-    ;;
-  esac
-  # HP-UX runs *really* slowly unless shared libraries are mode 555.
-  postinstall_cmds='chmod 555 $lib'
-  ;;
-
-interix[3-9]*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=no
-  hardcode_into_libs=yes
-  ;;
-
-irix5* | irix6* | nonstopux*)
-  case $host_os in
-    nonstopux*) version_type=nonstopux ;;
-    *)
-        if test "$lt_cv_prog_gnu_ld" = yes; then
-                version_type=linux
-        else
-                version_type=irix
-        fi ;;
-  esac
-  need_lib_prefix=no
-  need_version=no
-  soname_spec='${libname}${release}${shared_ext}$major'
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
-  case $host_os in
-  irix5* | nonstopux*)
-    libsuff= shlibsuff=
-    ;;
-  *)
-    case $LD in # libtool.m4 will add one of these switches to LD
-    *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
-      libsuff= shlibsuff= libmagic=32-bit;;
-    *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
-      libsuff=32 shlibsuff=N32 libmagic=N32;;
-    *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
-      libsuff=64 shlibsuff=64 libmagic=64-bit;;
-    *) libsuff= shlibsuff= libmagic=never-match;;
-    esac
-    ;;
-  esac
-  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
-  shlibpath_overrides_runpath=no
-  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
-  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
-  hardcode_into_libs=yes
-  ;;
-
-# No shared lib support for Linux oldld, aout, or coff.
-linux*oldld* | linux*aout* | linux*coff*)
-  dynamic_linker=no
-  ;;
-
-# This must be Linux ELF.
-linux* | k*bsd*-gnu | kopensolaris*-gnu)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=no
-  # Some binutils ld are patched to set DT_RUNPATH
-  save_LDFLAGS=$LDFLAGS
-  save_libdir=$libdir
-  eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \
-       LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\""
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
-  if  ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then :
-  shlibpath_overrides_runpath=yes
-fi
-fi
-rm -f core conftest.err conftest.$ac_objext \
-    conftest$ac_exeext conftest.$ac_ext
-  LDFLAGS=$save_LDFLAGS
-  libdir=$save_libdir
-
-  # This implies no fast_install, which is unacceptable.
-  # Some rework will be needed to allow for fast_install
-  # before this can be enabled.
-  hardcode_into_libs=yes
-
-  # Append ld.so.conf contents to the search path
-  if test -f /etc/ld.so.conf; then
-    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[       ]*hwcap[        ]/d;s/[:,      ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
-    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
-  fi
-
-  # We used to test for /lib/ld.so.1 and disable shared libraries on
-  # powerpc, because MkLinux only supported shared libraries with the
-  # GNU dynamic linker.  Since this was broken with cross compilers,
-  # most powerpc-linux boxes support dynamic linking these days and
-  # people can always --disable-shared, the test was removed, and we
-  # assume the GNU/Linux dynamic linker is in use.
-  dynamic_linker='GNU/Linux ld.so'
-  ;;
-
-netbsdelf*-gnu)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=no
-  hardcode_into_libs=yes
-  dynamic_linker='NetBSD ld.elf_so'
-  ;;
-
-netbsd*)
-  version_type=sunos
-  need_lib_prefix=no
-  need_version=no
-  if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-    dynamic_linker='NetBSD (a.out) ld.so'
-  else
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
-    dynamic_linker='NetBSD ld.elf_so'
-  fi
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  hardcode_into_libs=yes
-  ;;
-
-newsos6)
-  version_type=linux
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  ;;
-
-*nto* | *qnx*)
-  version_type=qnx
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=no
-  hardcode_into_libs=yes
-  dynamic_linker='ldqnx.so'
-  ;;
-
-openbsd*)
-  version_type=sunos
-  sys_lib_dlsearch_path_spec="/usr/lib"
-  need_lib_prefix=no
-  # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
-  case $host_os in
-    openbsd3.3 | openbsd3.3.*)  need_version=yes ;;
-    *)                          need_version=no  ;;
-  esac
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-    case $host_os in
-      openbsd2.[89] | openbsd2.[89].*)
-        shlibpath_overrides_runpath=no
-        ;;
-      *)
-        shlibpath_overrides_runpath=yes
-        ;;
-      esac
-  else
-    shlibpath_overrides_runpath=yes
-  fi
-  ;;
-
-os2*)
-  libname_spec='$name'
-  shrext_cmds=".dll"
-  need_lib_prefix=no
-  library_names_spec='$libname${shared_ext} $libname.a'
-  dynamic_linker='OS/2 ld.exe'
-  shlibpath_var=LIBPATH
-  ;;
-
-osf3* | osf4* | osf5*)
-  version_type=osf
-  need_lib_prefix=no
-  need_version=no
-  soname_spec='${libname}${release}${shared_ext}$major'
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  shlibpath_var=LD_LIBRARY_PATH
-  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
-  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
-  ;;
-
-rdos*)
-  dynamic_linker=no
-  ;;
-
-solaris*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  hardcode_into_libs=yes
-  # ldd complains unless libraries are executable
-  postinstall_cmds='chmod +x $lib'
-  ;;
-
-sunos4*)
-  version_type=sunos
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  if test "$with_gnu_ld" = yes; then
-    need_lib_prefix=no
-  fi
-  need_version=yes
-  ;;
-
-sysv4 | sysv4.3*)
-  version_type=linux
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  case $host_vendor in
-    sni)
-      shlibpath_overrides_runpath=no
-      need_lib_prefix=no
-      runpath_var=LD_RUN_PATH
-      ;;
-    siemens)
-      need_lib_prefix=no
-      ;;
-    motorola)
-      need_lib_prefix=no
-      need_version=no
-      shlibpath_overrides_runpath=no
-      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
-      ;;
-  esac
-  ;;
-
-sysv4*MP*)
-  if test -d /usr/nec ;then
-    version_type=linux
-    library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
-    soname_spec='$libname${shared_ext}.$major'
-    shlibpath_var=LD_LIBRARY_PATH
-  fi
-  ;;
-
-sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
-  version_type=freebsd-elf
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  hardcode_into_libs=yes
-  if test "$with_gnu_ld" = yes; then
-    sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
-  else
-    sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
-    case $host_os in
-      sco3.2v5*)
-        sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
-        ;;
-    esac
-  fi
-  sys_lib_dlsearch_path_spec='/usr/lib'
-  ;;
-
-tpf*)
-  # TPF is a cross-target only.  Preferred cross-host = GNU/Linux.
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=no
-  hardcode_into_libs=yes
-  ;;
-
-uts4*)
-  version_type=linux
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  ;;
-
-*)
-  dynamic_linker=no
-  ;;
-esac
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5
-$as_echo "$dynamic_linker" >&6; }
-test "$dynamic_linker" = no && can_build_shared=no
-
-variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
-if test "$GCC" = yes; then
-  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
-fi
-
-if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
-  sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
-fi
-if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
-  sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
-fi
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-  { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5
-$as_echo_n "checking how to hardcode library paths into programs... " >&6; }
-hardcode_action=
-if test -n "$hardcode_libdir_flag_spec" ||
-   test -n "$runpath_var" ||
-   test "X$hardcode_automatic" = "Xyes" ; then
-
-  # We can hardcode non-existent directories.
-  if test "$hardcode_direct" != no &&
-     # If the only mechanism to avoid hardcoding is shlibpath_var, we
-     # have to relink, otherwise we might link with an installed library
-     # when we should be linking with a yet-to-be-installed one
-     ## test "$_LT_TAGVAR(hardcode_shlibpath_var, )" != no &&
-     test "$hardcode_minus_L" != no; then
-    # Linking always hardcodes the temporary library directory.
-    hardcode_action=relink
-  else
-    # We can link without hardcoding, and we can hardcode nonexisting dirs.
-    hardcode_action=immediate
-  fi
-else
-  # We cannot hardcode anything, or else we can only hardcode existing
-  # directories.
-  hardcode_action=unsupported
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action" >&5
-$as_echo "$hardcode_action" >&6; }
-
-if test "$hardcode_action" = relink ||
-   test "$inherit_rpath" = yes; then
-  # Fast installation is not supported
-  enable_fast_install=no
-elif test "$shlibpath_overrides_runpath" = yes ||
-     test "$enable_shared" = no; then
-  # Fast installation is not necessary
-  enable_fast_install=needless
-fi
-
-
-
-
-
-
-  if test "x$enable_dlopen" != xyes; then
-  enable_dlopen=unknown
-  enable_dlopen_self=unknown
-  enable_dlopen_self_static=unknown
-else
-  lt_cv_dlopen=no
-  lt_cv_dlopen_libs=
-
-  case $host_os in
-  beos*)
-    lt_cv_dlopen="load_add_on"
-    lt_cv_dlopen_libs=
-    lt_cv_dlopen_self=yes
-    ;;
-
-  mingw* | pw32* | cegcc*)
-    lt_cv_dlopen="LoadLibrary"
-    lt_cv_dlopen_libs=
-    ;;
-
-  cygwin*)
-    lt_cv_dlopen="dlopen"
-    lt_cv_dlopen_libs=
-    ;;
-
-  darwin*)
-  # if libdl is installed we need to link against it
-    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5
-$as_echo_n "checking for dlopen in -ldl... " >&6; }
-if test "${ac_cv_lib_dl_dlopen+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-ldl  $LIBS"
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-/* Override any GCC internal prototype to avoid an error.
-   Use char because int might match the return type of a GCC
-   builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char dlopen ();
-int
-main ()
-{
-return dlopen ();
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
-  ac_cv_lib_dl_dlopen=yes
-else
-  ac_cv_lib_dl_dlopen=no
-fi
-rm -f core conftest.err conftest.$ac_objext \
-    conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5
-$as_echo "$ac_cv_lib_dl_dlopen" >&6; }
-if test "x$ac_cv_lib_dl_dlopen" = x""yes; then :
-  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
-else
-
-    lt_cv_dlopen="dyld"
-    lt_cv_dlopen_libs=
-    lt_cv_dlopen_self=yes
-
-fi
-
-    ;;
-
-  *)
-    ac_fn_c_check_func "$LINENO" "shl_load" "ac_cv_func_shl_load"
-if test "x$ac_cv_func_shl_load" = x""yes; then :
-  lt_cv_dlopen="shl_load"
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shl_load in -ldld" >&5
-$as_echo_n "checking for shl_load in -ldld... " >&6; }
-if test "${ac_cv_lib_dld_shl_load+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-ldld  $LIBS"
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-/* Override any GCC internal prototype to avoid an error.
-   Use char because int might match the return type of a GCC
-   builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char shl_load ();
-int
-main ()
-{
-return shl_load ();
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
-  ac_cv_lib_dld_shl_load=yes
-else
-  ac_cv_lib_dld_shl_load=no
-fi
-rm -f core conftest.err conftest.$ac_objext \
-    conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_shl_load" >&5
-$as_echo "$ac_cv_lib_dld_shl_load" >&6; }
-if test "x$ac_cv_lib_dld_shl_load" = x""yes; then :
-  lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"
-else
-  ac_fn_c_check_func "$LINENO" "dlopen" "ac_cv_func_dlopen"
-if test "x$ac_cv_func_dlopen" = x""yes; then :
-  lt_cv_dlopen="dlopen"
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5
-$as_echo_n "checking for dlopen in -ldl... " >&6; }
-if test "${ac_cv_lib_dl_dlopen+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-ldl  $LIBS"
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-/* Override any GCC internal prototype to avoid an error.
-   Use char because int might match the return type of a GCC
-   builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char dlopen ();
-int
-main ()
-{
-return dlopen ();
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
-  ac_cv_lib_dl_dlopen=yes
-else
-  ac_cv_lib_dl_dlopen=no
-fi
-rm -f core conftest.err conftest.$ac_objext \
-    conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5
-$as_echo "$ac_cv_lib_dl_dlopen" >&6; }
-if test "x$ac_cv_lib_dl_dlopen" = x""yes; then :
-  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -lsvld" >&5
-$as_echo_n "checking for dlopen in -lsvld... " >&6; }
-if test "${ac_cv_lib_svld_dlopen+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-lsvld  $LIBS"
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-/* Override any GCC internal prototype to avoid an error.
-   Use char because int might match the return type of a GCC
-   builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char dlopen ();
-int
-main ()
-{
-return dlopen ();
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
-  ac_cv_lib_svld_dlopen=yes
-else
-  ac_cv_lib_svld_dlopen=no
-fi
-rm -f core conftest.err conftest.$ac_objext \
-    conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_svld_dlopen" >&5
-$as_echo "$ac_cv_lib_svld_dlopen" >&6; }
-if test "x$ac_cv_lib_svld_dlopen" = x""yes; then :
-  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dld_link in -ldld" >&5
-$as_echo_n "checking for dld_link in -ldld... " >&6; }
-if test "${ac_cv_lib_dld_dld_link+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-ldld  $LIBS"
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-/* Override any GCC internal prototype to avoid an error.
-   Use char because int might match the return type of a GCC
-   builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char dld_link ();
-int
-main ()
-{
-return dld_link ();
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
-  ac_cv_lib_dld_dld_link=yes
-else
-  ac_cv_lib_dld_dld_link=no
-fi
-rm -f core conftest.err conftest.$ac_objext \
-    conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_dld_link" >&5
-$as_echo "$ac_cv_lib_dld_dld_link" >&6; }
-if test "x$ac_cv_lib_dld_dld_link" = x""yes; then :
-  lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"
-fi
-
-
-fi
-
-
-fi
-
-
-fi
-
-
-fi
-
-
-fi
-
-    ;;
-  esac
-
-  if test "x$lt_cv_dlopen" != xno; then
-    enable_dlopen=yes
-  else
-    enable_dlopen=no
-  fi
-
-  case $lt_cv_dlopen in
-  dlopen)
-    save_CPPFLAGS="$CPPFLAGS"
-    test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
-
-    save_LDFLAGS="$LDFLAGS"
-    wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
-
-    save_LIBS="$LIBS"
-    LIBS="$lt_cv_dlopen_libs $LIBS"
-
-    { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a program can dlopen itself" >&5
-$as_echo_n "checking whether a program can dlopen itself... " >&6; }
-if test "${lt_cv_dlopen_self+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-          if test "$cross_compiling" = yes; then :
-  lt_cv_dlopen_self=cross
-else
-  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
-  lt_status=$lt_dlunknown
-  cat > conftest.$ac_ext <<_LT_EOF
-#line 10550 "configure"
-#include "confdefs.h"
-
-#if HAVE_DLFCN_H
-#include <dlfcn.h>
-#endif
-
-#include <stdio.h>
-
-#ifdef RTLD_GLOBAL
-#  define LT_DLGLOBAL           RTLD_GLOBAL
-#else
-#  ifdef DL_GLOBAL
-#    define LT_DLGLOBAL         DL_GLOBAL
-#  else
-#    define LT_DLGLOBAL         0
-#  endif
-#endif
-
-/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
-   find out it does not work in some platform. */
-#ifndef LT_DLLAZY_OR_NOW
-#  ifdef RTLD_LAZY
-#    define LT_DLLAZY_OR_NOW            RTLD_LAZY
-#  else
-#    ifdef DL_LAZY
-#      define LT_DLLAZY_OR_NOW          DL_LAZY
-#    else
-#      ifdef RTLD_NOW
-#        define LT_DLLAZY_OR_NOW        RTLD_NOW
-#      else
-#        ifdef DL_NOW
-#          define LT_DLLAZY_OR_NOW      DL_NOW
-#        else
-#          define LT_DLLAZY_OR_NOW      0
-#        endif
-#      endif
-#    endif
-#  endif
-#endif
-
-void fnord() { int i=42;}
-int main ()
-{
-  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
-  int status = $lt_dlunknown;
-
-  if (self)
-    {
-      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
-      else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
-      /* dlclose (self); */
-    }
-  else
-    puts (dlerror ());
-
-  return status;
-}
-_LT_EOF
-  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then
-    (./conftest; exit; ) >&5 2>/dev/null
-    lt_status=$?
-    case x$lt_status in
-      x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;;
-      x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;;
-      x$lt_dlunknown|x*) lt_cv_dlopen_self=no ;;
-    esac
-  else :
-    # compilation failed
-    lt_cv_dlopen_self=no
-  fi
-fi
-rm -fr conftest*
-
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self" >&5
-$as_echo "$lt_cv_dlopen_self" >&6; }
-
-    if test "x$lt_cv_dlopen_self" = xyes; then
-      wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
-      { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a statically linked program can dlopen itself" >&5
-$as_echo_n "checking whether a statically linked program can dlopen itself... " >&6; }
-if test "${lt_cv_dlopen_self_static+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-          if test "$cross_compiling" = yes; then :
-  lt_cv_dlopen_self_static=cross
-else
-  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
-  lt_status=$lt_dlunknown
-  cat > conftest.$ac_ext <<_LT_EOF
-#line 10646 "configure"
-#include "confdefs.h"
-
-#if HAVE_DLFCN_H
-#include <dlfcn.h>
-#endif
-
-#include <stdio.h>
-
-#ifdef RTLD_GLOBAL
-#  define LT_DLGLOBAL           RTLD_GLOBAL
-#else
-#  ifdef DL_GLOBAL
-#    define LT_DLGLOBAL         DL_GLOBAL
-#  else
-#    define LT_DLGLOBAL         0
-#  endif
-#endif
-
-/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
-   find out it does not work in some platform. */
-#ifndef LT_DLLAZY_OR_NOW
-#  ifdef RTLD_LAZY
-#    define LT_DLLAZY_OR_NOW            RTLD_LAZY
-#  else
-#    ifdef DL_LAZY
-#      define LT_DLLAZY_OR_NOW          DL_LAZY
-#    else
-#      ifdef RTLD_NOW
-#        define LT_DLLAZY_OR_NOW        RTLD_NOW
-#      else
-#        ifdef DL_NOW
-#          define LT_DLLAZY_OR_NOW      DL_NOW
-#        else
-#          define LT_DLLAZY_OR_NOW      0
-#        endif
-#      endif
-#    endif
-#  endif
-#endif
-
-void fnord() { int i=42;}
-int main ()
-{
-  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
-  int status = $lt_dlunknown;
-
-  if (self)
-    {
-      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
-      else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
-      /* dlclose (self); */
-    }
-  else
-    puts (dlerror ());
-
-  return status;
-}
-_LT_EOF
-  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then
-    (./conftest; exit; ) >&5 2>/dev/null
-    lt_status=$?
-    case x$lt_status in
-      x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;;
-      x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;;
-      x$lt_dlunknown|x*) lt_cv_dlopen_self_static=no ;;
-    esac
-  else :
-    # compilation failed
-    lt_cv_dlopen_self_static=no
-  fi
-fi
-rm -fr conftest*
-
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self_static" >&5
-$as_echo "$lt_cv_dlopen_self_static" >&6; }
-    fi
-
-    CPPFLAGS="$save_CPPFLAGS"
-    LDFLAGS="$save_LDFLAGS"
-    LIBS="$save_LIBS"
-    ;;
-  esac
-
-  case $lt_cv_dlopen_self in
-  yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
-  *) enable_dlopen_self=unknown ;;
-  esac
-
-  case $lt_cv_dlopen_self_static in
-  yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
-  *) enable_dlopen_self_static=unknown ;;
-  esac
-fi
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-striplib=
-old_striplib=
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether stripping libraries is possible" >&5
-$as_echo_n "checking whether stripping libraries is possible... " >&6; }
-if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then
-  test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
-  test -z "$striplib" && striplib="$STRIP --strip-unneeded"
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-else
-# FIXME - insert some real tests, host_os isn't really good enough
-  case $host_os in
-  darwin*)
-    if test -n "$STRIP" ; then
-      striplib="$STRIP -x"
-      old_striplib="$STRIP -S"
-      { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-    else
-      { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-    fi
-    ;;
-  *)
-    { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-    ;;
-  esac
-fi
-
-
-
-
-
-
-
-
-
-
-
-
-  # Report which library types will actually be built
-  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if libtool supports shared libraries" >&5
-$as_echo_n "checking if libtool supports shared libraries... " >&6; }
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $can_build_shared" >&5
-$as_echo "$can_build_shared" >&6; }
-
-  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build shared libraries" >&5
-$as_echo_n "checking whether to build shared libraries... " >&6; }
-  test "$can_build_shared" = "no" && enable_shared=no
-
-  # On AIX, shared libraries and static libraries use the same namespace, and
-  # are all built from PIC.
-  case $host_os in
-  aix3*)
-    test "$enable_shared" = yes && enable_static=no
-    if test -n "$RANLIB"; then
-      archive_cmds="$archive_cmds~\$RANLIB \$lib"
-      postinstall_cmds='$RANLIB $lib'
-    fi
-    ;;
-
-  aix[4-9]*)
-    if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
-      test "$enable_shared" = yes && enable_static=no
-    fi
-    ;;
-  esac
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_shared" >&5
-$as_echo "$enable_shared" >&6; }
-
-  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build static libraries" >&5
-$as_echo_n "checking whether to build static libraries... " >&6; }
-  # Make sure either enable_shared or enable_static is yes.
-  test "$enable_shared" = yes || enable_static=yes
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_static" >&5
-$as_echo "$enable_static" >&6; }
-
-
-
-
-fi
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-CC="$lt_save_CC"
-
-
-
-
-
-
-
-
-
-
-
-
-
-        ac_config_commands="$ac_config_commands libtool"
-
-
-
-
-# Only expand once:
-
-
-
-##--##--##--##--##--##--##--##--##--##--##--##--##--##--##--##--##
-##--##--##--##--##--##--##--##--##--##--##--##--##--##--##--##--##
-
-
-
-cat >>confdefs.h <<_ACEOF
-#define VMAJ 1
-_ACEOF
-
-
-cat >>confdefs.h <<_ACEOF
-#define VMIN 6
-_ACEOF
-
-
-cat >>confdefs.h <<_ACEOF
-#define VMIC 0
-_ACEOF
-
-
-cat >>confdefs.h <<_ACEOF
-#define VREV 0
-_ACEOF
-
-version_info="7:0:6"
-release_info=""
-
-
-##--##--##--##--##--##--##--##--##--##--##--##--##--##--##--##--##
-##--##--##--##--##--##--##--##--##--##--##--##--##--##--##--##--##
-VMAJ=1
-
-
-
-### Needed information
-
-
-
-
-### Default options with respect to host
-
-want_gnutls="auto"
-want_openssl="auto"
-want_cipher="yes"
-want_signature="yes"
-
-requirement_eet=""
-
-
-### Additional options to configure
-
-# Amalgamation
-
-# Check whether --enable-amalgamation was given.
-if test "${enable_amalgamation+set}" = set; then :
-  enableval=$enable_amalgamation; if test "x${enableval}" = "xyes"; then
-       do_amalgamation="yes"
-    else
-       do_amalgamation="no"
-    fi
-
-else
-  do_amalgamation="no"
-
-fi
-
- if test "x${do_amalgamation}" = "xyes"; then
-  EET_AMALGAMATION_TRUE=
-  EET_AMALGAMATION_FALSE='#'
-else
-  EET_AMALGAMATION_TRUE='#'
-  EET_AMALGAMATION_FALSE=
-fi
-
-
-
-
-
-have_eet="yes"
-
-
-# Check whether --enable-eet was given.
-if test "${enable_eet+set}" = set; then :
-  enableval=$enable_eet;
-    if test "x${enableval}" = "xyes" ; then
-       have_eet="yes"
-    else
-       have_eet="no"
-    fi
-
-fi
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build eet binary" >&5
-$as_echo_n "checking whether to build eet binary... " >&6; }
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $have_eet" >&5
-$as_echo "$have_eet" >&6; }
-
-if test "x$have_eet" = "xyes"; then
-   EET_PRG=eet${EXEEXT}
-fi
-
-
-
- if test "x$have_eet" = "xyes"; then
-  BUILD_EET_TRUE=
-  BUILD_EET_FALSE='#'
-else
-  BUILD_EET_TRUE='#'
-  BUILD_EET_FALSE=
-fi
-
-
-if test "x$have_eet" = "xyes"; then :
-
-fi
-
-
-
-# Old eet file format support
-
-old_eet_file_format="yes"
-# Check whether --enable-old-eet-file-format was given.
-if test "${enable_old_eet_file_format+set}" = set; then :
-  enableval=$enable_old_eet_file_format; old_eet_file_format=$enableval
-
-fi
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to support old eet file format" >&5
-$as_echo_n "checking whether to support old eet file format... " >&6; }
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: ${old_eet_file_format}" >&5
-$as_echo "${old_eet_file_format}" >&6; }
-
-if test "x${old_eet_file_format}" = "xyes" ; then
-
-$as_echo "#define EET_OLD_EET_FILE_FORMAT 1" >>confdefs.h
-
-else
-
-$as_echo "#define EET_OLD_EET_FILE_FORMAT 0" >>confdefs.h
-
-fi
-
-# Openssl support
-
-# Check whether --enable-openssl was given.
-if test "${enable_openssl+set}" = set; then :
-  enableval=$enable_openssl; want_openssl=$enableval
-
-fi
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to use OpenSSL" >&5
-$as_echo_n "checking whether to use OpenSSL... " >&6; }
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: ${want_openssl}" >&5
-$as_echo "${want_openssl}" >&6; }
-
-# Cryptography support
-
-# Check whether --enable-cipher was given.
-if test "${enable_cipher+set}" = set; then :
-  enableval=$enable_cipher; want_cipher=$enableval
-
-fi
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to use cipher" >&5
-$as_echo_n "checking whether to use cipher... " >&6; }
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: ${want_cipher}" >&5
-$as_echo "${want_cipher}" >&6; }
-
-# Check whether --enable-signature was given.
-if test "${enable_signature+set}" = set; then :
-  enableval=$enable_signature; want_signature=$enableval
-
-fi
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to use signature" >&5
-$as_echo_n "checking whether to use signature... " >&6; }
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: ${want_signature}" >&5
-$as_echo "${want_signature}" >&6; }
-
-# Assert or fail.
-prefer_assert="no"
-# Check whether --enable-assert was given.
-if test "${enable_assert+set}" = set; then :
-  enableval=$enable_assert; prefer_assert=$enableval
-
-fi
-
-
-# Examples
-
-# Check whether --enable-install-examples was given.
-if test "${enable_install_examples+set}" = set; then :
-  enableval=$enable_install_examples;
-    if test "x${enableval}" = "xyes" ; then
-       install_examples="yes"
-    else
-       install_examples="no"
-    fi
-
-else
-  install_examples="yes"
-fi
-
- if test "x${install_examples}" = "xyes"; then
-  INSTALL_EXAMPLES_TRUE=
-  INSTALL_EXAMPLES_FALSE='#'
-else
-  INSTALL_EXAMPLES_TRUE='#'
-  INSTALL_EXAMPLES_FALSE=
-fi
-
-
-# Check whether --enable-build-examples was given.
-if test "${enable_build_examples+set}" = set; then :
-  enableval=$enable_build_examples;
-    if test "x${enableval}" = "xyes" ; then
-       build_examples="yes"
-    else
-       build_examples="no"
-    fi
-
-else
-  build_examples="no"
-fi
-
- if test "x${build_examples}" = "xyes"; then
-  BUILD_EXAMPLES_TRUE=
-  BUILD_EXAMPLES_FALSE='#'
-else
-  BUILD_EXAMPLES_TRUE='#'
-  BUILD_EXAMPLES_FALSE=
-fi
-
-
-# Unit tests, coverage and benchmarking
-
-
-
-
-
-
-
-if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then
-        if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}pkg-config", so it can be a program name with args.
-set dummy ${ac_tool_prefix}pkg-config; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_path_PKG_CONFIG+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  case $PKG_CONFIG in
-  [\\/]* | ?:[\\/]*)
-  ac_cv_path_PKG_CONFIG="$PKG_CONFIG" # Let the user override the test with a path.
-  ;;
-  *)
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_path_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-  ;;
-esac
-fi
-PKG_CONFIG=$ac_cv_path_PKG_CONFIG
-if test -n "$PKG_CONFIG"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $PKG_CONFIG" >&5
-$as_echo "$PKG_CONFIG" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_path_PKG_CONFIG"; then
-  ac_pt_PKG_CONFIG=$PKG_CONFIG
-  # Extract the first word of "pkg-config", so it can be a program name with args.
-set dummy pkg-config; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_path_ac_pt_PKG_CONFIG+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  case $ac_pt_PKG_CONFIG in
-  [\\/]* | ?:[\\/]*)
-  ac_cv_path_ac_pt_PKG_CONFIG="$ac_pt_PKG_CONFIG" # Let the user override the test with a path.
-  ;;
-  *)
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_path_ac_pt_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-  ;;
-esac
-fi
-ac_pt_PKG_CONFIG=$ac_cv_path_ac_pt_PKG_CONFIG
-if test -n "$ac_pt_PKG_CONFIG"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_pt_PKG_CONFIG" >&5
-$as_echo "$ac_pt_PKG_CONFIG" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-  if test "x$ac_pt_PKG_CONFIG" = x; then
-    PKG_CONFIG=""
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
-    PKG_CONFIG=$ac_pt_PKG_CONFIG
-  fi
-else
-  PKG_CONFIG="$ac_cv_path_PKG_CONFIG"
-fi
-
-fi
-if test -n "$PKG_CONFIG"; then
-        _pkg_min_version=0.9.0
-        { $as_echo "$as_me:${as_lineno-$LINENO}: checking pkg-config is at least version $_pkg_min_version" >&5
-$as_echo_n "checking pkg-config is at least version $_pkg_min_version... " >&6; }
-        if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then
-                { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-        else
-                { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-                PKG_CONFIG=""
-        fi
-fi
-
-
-
-# Check whether --enable-tests was given.
-if test "${enable_tests+set}" = set; then :
-  enableval=$enable_tests;
-    if test "x${enableval}" = "xyes" ; then
-       _efl_enable_tests="yes"
-    else
-       _efl_enable_tests="no"
-    fi
-
-else
-  _efl_enable_tests="no"
-fi
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether tests are built" >&5
-$as_echo_n "checking whether tests are built... " >&6; }
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: ${_efl_enable_tests}" >&5
-$as_echo "${_efl_enable_tests}" >&6; }
-
-
-
-if test "x${_efl_enable_tests}" = "xyes" ; then
-
-pkg_failed=no
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for CHECK" >&5
-$as_echo_n "checking for CHECK... " >&6; }
-
-if test -n "$CHECK_CFLAGS"; then
-    pkg_cv_CHECK_CFLAGS="$CHECK_CFLAGS"
- elif test -n "$PKG_CONFIG"; then
-    if test -n "$PKG_CONFIG" && \
-    { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"check >= 0.9.5\""; } >&5
-  ($PKG_CONFIG --exists --print-errors "check >= 0.9.5") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; }; then
-  pkg_cv_CHECK_CFLAGS=`$PKG_CONFIG --cflags "check >= 0.9.5" 2>/dev/null`
-else
-  pkg_failed=yes
-fi
- else
-    pkg_failed=untried
-fi
-if test -n "$CHECK_LIBS"; then
-    pkg_cv_CHECK_LIBS="$CHECK_LIBS"
- elif test -n "$PKG_CONFIG"; then
-    if test -n "$PKG_CONFIG" && \
-    { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"check >= 0.9.5\""; } >&5
-  ($PKG_CONFIG --exists --print-errors "check >= 0.9.5") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; }; then
-  pkg_cv_CHECK_LIBS=`$PKG_CONFIG --libs "check >= 0.9.5" 2>/dev/null`
-else
-  pkg_failed=yes
-fi
- else
-    pkg_failed=untried
-fi
-
-
-
-if test $pkg_failed = yes; then
-        { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-
-if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then
-        _pkg_short_errors_supported=yes
-else
-        _pkg_short_errors_supported=no
-fi
-        if test $_pkg_short_errors_supported = yes; then
-                CHECK_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "check >= 0.9.5" 2>&1`
-        else
-                CHECK_PKG_ERRORS=`$PKG_CONFIG --print-errors "check >= 0.9.5" 2>&1`
-        fi
-        # Put the nasty error message in config.log where it belongs
-        echo "$CHECK_PKG_ERRORS" >&5
-
-        _efl_enable_tests="no"
-elif test $pkg_failed = untried; then
-        { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-        _efl_enable_tests="no"
-else
-        CHECK_CFLAGS=$pkg_cv_CHECK_CFLAGS
-        CHECK_LIBS=$pkg_cv_CHECK_LIBS
-        { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-        dummy="yes"
-fi
-fi
-
- if test "x${_efl_enable_tests}" = "xyes"; then
-  EFL_ENABLE_TESTS_TRUE=
-  EFL_ENABLE_TESTS_FALSE='#'
-else
-  EFL_ENABLE_TESTS_TRUE='#'
-  EFL_ENABLE_TESTS_FALSE=
-fi
-
-
-if test "x$_efl_enable_tests" = "xyes"; then :
-  enable_tests="yes"
-else
-  enable_tests="no"
-fi
-
-
-
-
-# Check whether --enable-coverage was given.
-if test "${enable_coverage+set}" = set; then :
-  enableval=$enable_coverage;
-    if test "x${enableval}" = "xyes" ; then
-       _efl_enable_coverage="yes"
-    else
-       _efl_enable_coverage="no"
-    fi
-
-else
-  _efl_enable_coverage="no"
-fi
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to use profiling instrumentation" >&5
-$as_echo_n "checking whether to use profiling instrumentation... " >&6; }
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $_efl_enable_coverage" >&5
-$as_echo "$_efl_enable_coverage" >&6; }
-
-
-if test "x$_efl_enable_coverage" = "xyes" && test ! "x${enable_tests}" = "xyes" ; then
-   { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Coverage report requested but tests not being built, disable profiling instrumentation." >&5
-$as_echo "$as_me: WARNING: Coverage report requested but tests not being built, disable profiling instrumentation." >&2;}
-   { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Run configure with --enable-tests" >&5
-$as_echo "$as_me: WARNING: Run configure with --enable-tests" >&2;}
-   _efl_enable_coverage="no"
-fi
-
-if test "x$_efl_enable_coverage" = "xyes" ; then
-   # Extract the first word of "lcov", so it can be a program name with args.
-set dummy lcov; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_have_lcov+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$have_lcov"; then
-  ac_cv_prog_have_lcov="$have_lcov" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_have_lcov="yes"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-  test -z "$ac_cv_prog_have_lcov" && ac_cv_prog_have_lcov="no"
-fi
-fi
-have_lcov=$ac_cv_prog_have_lcov
-if test -n "$have_lcov"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $have_lcov" >&5
-$as_echo "$have_lcov" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-   if test "x$have_lcov" = "xyes" ; then
-      EFL_COVERAGE_CFLAGS="-fprofile-arcs -ftest-coverage"
-      EFL_COVERAGE_LIBS="-lgcov"
-# remove any optimisation flag and force debug symbols
-      EFL_DEBUG_CFLAGS="-g -O0 -DDEBUG"
-   else
-      { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: lcov is not found, disable profiling instrumentation" >&5
-$as_echo "$as_me: WARNING: lcov is not found, disable profiling instrumentation" >&2;}
-      _efl_enable_coverage="no"
-   fi
-fi
-
-
-
-
- if test "x${_efl_enable_coverage}" = "xyes"; then
-  EFL_ENABLE_COVERAGE_TRUE=
-  EFL_ENABLE_COVERAGE_FALSE='#'
-else
-  EFL_ENABLE_COVERAGE_TRUE='#'
-  EFL_ENABLE_COVERAGE_FALSE=
-fi
-
-
-if test "x$_efl_enable_coverage" = "xyes"; then :
-  enable_coverage="yes"
-else
-  enable_coverage="no"
-fi
-
-
-if test "x${prefer_assert}" = "xno"; then
-   DEBUG_CFLAGS="-DNDEBUG"
-else
-# use debug symbols and set DEBUG if coverage support is enabled
-   DEBUG_CFLAGS="${EFL_DEBUG_CFLAGS}"
-fi
-
-
-
-### Checks for programs
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
-set dummy ${ac_tool_prefix}gcc; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_CC+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_CC="${ac_tool_prefix}gcc"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
-$as_echo "$CC" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_CC"; then
-  ac_ct_CC=$CC
-  # Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_CC+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$ac_ct_CC"; then
-  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_ac_ct_CC="gcc"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_CC=$ac_cv_prog_ac_ct_CC
-if test -n "$ac_ct_CC"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
-$as_echo "$ac_ct_CC" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-  if test "x$ac_ct_CC" = x; then
-    CC=""
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
-    CC=$ac_ct_CC
-  fi
-else
-  CC="$ac_cv_prog_CC"
-fi
-
-if test -z "$CC"; then
-          if test -n "$ac_tool_prefix"; then
-    # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
-set dummy ${ac_tool_prefix}cc; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_CC+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_CC="${ac_tool_prefix}cc"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
-$as_echo "$CC" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-  fi
-fi
-if test -z "$CC"; then
-  # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_CC+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  ac_prog_rejected=no
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
-       ac_prog_rejected=yes
-       continue
-     fi
-    ac_cv_prog_CC="cc"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-if test $ac_prog_rejected = yes; then
-  # We found a bogon in the path, so make sure we never use it.
-  set dummy $ac_cv_prog_CC
-  shift
-  if test $# != 0; then
-    # We chose a different compiler from the bogus one.
-    # However, it has the same basename, so the bogon will be chosen
-    # first if we set CC to just the basename; use the full file name.
-    shift
-    ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
-  fi
-fi
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
-$as_echo "$CC" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$CC"; then
-  if test -n "$ac_tool_prefix"; then
-  for ac_prog in cl.exe
-  do
-    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
-set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_CC+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
-$as_echo "$CC" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-    test -n "$CC" && break
-  done
-fi
-if test -z "$CC"; then
-  ac_ct_CC=$CC
-  for ac_prog in cl.exe
-do
-  # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_CC+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$ac_ct_CC"; then
-  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_ac_ct_CC="$ac_prog"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_CC=$ac_cv_prog_ac_ct_CC
-if test -n "$ac_ct_CC"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
-$as_echo "$ac_ct_CC" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-  test -n "$ac_ct_CC" && break
-done
-
-  if test "x$ac_ct_CC" = x; then
-    CC=""
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
-    CC=$ac_ct_CC
-  fi
-fi
-
-fi
-
-
-test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error $? "no acceptable C compiler found in \$PATH
-See \`config.log' for more details" "$LINENO" 5 ; }
-
-# Provide some information about the compiler.
-$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5
-set X $ac_compile
-ac_compiler=$2
-for ac_option in --version -v -V -qversion; do
-  { { ac_try="$ac_compiler $ac_option >&5"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
-  (eval "$ac_compiler $ac_option >&5") 2>conftest.err
-  ac_status=$?
-  if test -s conftest.err; then
-    sed '10a\
-... rest of stderr output deleted ...
-         10q' conftest.err >conftest.er1
-    cat conftest.er1 >&5
-  fi
-  rm -f conftest.er1 conftest.err
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; }
-done
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5
-$as_echo_n "checking whether we are using the GNU C compiler... " >&6; }
-if test "${ac_cv_c_compiler_gnu+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-int
-main ()
-{
-#ifndef __GNUC__
-       choke me
-#endif
-
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-  ac_compiler_gnu=yes
-else
-  ac_compiler_gnu=no
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-ac_cv_c_compiler_gnu=$ac_compiler_gnu
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5
-$as_echo "$ac_cv_c_compiler_gnu" >&6; }
-if test $ac_compiler_gnu = yes; then
-  GCC=yes
-else
-  GCC=
-fi
-ac_test_CFLAGS=${CFLAGS+set}
-ac_save_CFLAGS=$CFLAGS
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5
-$as_echo_n "checking whether $CC accepts -g... " >&6; }
-if test "${ac_cv_prog_cc_g+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  ac_save_c_werror_flag=$ac_c_werror_flag
-   ac_c_werror_flag=yes
-   ac_cv_prog_cc_g=no
-   CFLAGS="-g"
-   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-  ac_cv_prog_cc_g=yes
-else
-  CFLAGS=""
-      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-
-else
-  ac_c_werror_flag=$ac_save_c_werror_flag
-         CFLAGS="-g"
-         cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-  ac_cv_prog_cc_g=yes
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-   ac_c_werror_flag=$ac_save_c_werror_flag
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5
-$as_echo "$ac_cv_prog_cc_g" >&6; }
-if test "$ac_test_CFLAGS" = set; then
-  CFLAGS=$ac_save_CFLAGS
-elif test $ac_cv_prog_cc_g = yes; then
-  if test "$GCC" = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-g"
-  fi
-else
-  if test "$GCC" = yes; then
-    CFLAGS="-O2"
-  else
-    CFLAGS=
-  fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5
-$as_echo_n "checking for $CC option to accept ISO C89... " >&6; }
-if test "${ac_cv_prog_cc_c89+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  ac_cv_prog_cc_c89=no
-ac_save_CC=$CC
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-#include <stdarg.h>
-#include <stdio.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-/* Most of the following tests are stolen from RCS 5.7's src/conf.sh.  */
-struct buf { int x; };
-FILE * (*rcsopen) (struct buf *, struct stat *, int);
-static char *e (p, i)
-     char **p;
-     int i;
-{
-  return p[i];
-}
-static char *f (char * (*g) (char **, int), char **p, ...)
-{
-  char *s;
-  va_list v;
-  va_start (v,p);
-  s = g (p, va_arg (v,int));
-  va_end (v);
-  return s;
-}
-
-/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default.  It has
-   function prototypes and stuff, but not '\xHH' hex character constants.
-   These don't provoke an error unfortunately, instead are silently treated
-   as 'x'.  The following induces an error, until -std is added to get
-   proper ANSI mode.  Curiously '\x00'!='x' always comes out true, for an
-   array size at least.  It's necessary to write '\x00'==0 to get something
-   that's true only with -std.  */
-int osf4_cc_array ['\x00' == 0 ? 1 : -1];
-
-/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
-   inside strings and character constants.  */
-#define FOO(x) 'x'
-int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
-
-int test (int i, double x);
-struct s1 {int (*f) (int a);};
-struct s2 {int (*f) (double a);};
-int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
-int argc;
-char **argv;
-int
-main ()
-{
-return f (e, argv, 0) != argv[0]  ||  f (e, argv, 1) != argv[1];
-  ;
-  return 0;
-}
-_ACEOF
-for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \
-        -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
-do
-  CC="$ac_save_CC $ac_arg"
-  if ac_fn_c_try_compile "$LINENO"; then :
-  ac_cv_prog_cc_c89=$ac_arg
-fi
-rm -f core conftest.err conftest.$ac_objext
-  test "x$ac_cv_prog_cc_c89" != "xno" && break
-done
-rm -f conftest.$ac_ext
-CC=$ac_save_CC
-
-fi
-# AC_CACHE_VAL
-case "x$ac_cv_prog_cc_c89" in
-  x)
-    { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5
-$as_echo "none needed" >&6; } ;;
-  xno)
-    { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5
-$as_echo "unsupported" >&6; } ;;
-  *)
-    CC="$CC $ac_cv_prog_cc_c89"
-    { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5
-$as_echo "$ac_cv_prog_cc_c89" >&6; } ;;
-esac
-if test "x$ac_cv_prog_cc_c89" != xno; then :
-
-fi
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-depcc="$CC"   am_compiler_list=
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5
-$as_echo_n "checking dependency style of $depcc... " >&6; }
-if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
-  # We make a subdir and do the tests there.  Otherwise we can end up
-  # making bogus files that we don't know about and never remove.  For
-  # instance it was reported that on HP-UX the gcc test will end up
-  # making a dummy file named `D' -- because `-MD' means `put the output
-  # in D'.
-  mkdir conftest.dir
-  # Copy depcomp to subdir because otherwise we won't find it if we're
-  # using a relative directory.
-  cp "$am_depcomp" conftest.dir
-  cd conftest.dir
-  # We will build objects and dependencies in a subdirectory because
-  # it helps to detect inapplicable dependency modes.  For instance
-  # both Tru64's cc and ICC support -MD to output dependencies as a
-  # side effect of compilation, but ICC will put the dependencies in
-  # the current directory while Tru64 will put them in the object
-  # directory.
-  mkdir sub
-
-  am_cv_CC_dependencies_compiler_type=none
-  if test "$am_compiler_list" = ""; then
-     am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
-  fi
-  am__universal=false
-  case " $depcc " in #(
-     *\ -arch\ *\ -arch\ *) am__universal=true ;;
-     esac
-
-  for depmode in $am_compiler_list; do
-    # Setup a source with many dependencies, because some compilers
-    # like to wrap large dependency lists on column 80 (with \), and
-    # we should not choose a depcomp mode which is confused by this.
-    #
-    # We need to recreate these files for each test, as the compiler may
-    # overwrite some of them when testing with obscure command lines.
-    # This happens at least with the AIX C compiler.
-    : > sub/conftest.c
-    for i in 1 2 3 4 5 6; do
-      echo '#include "conftst'$i'.h"' >> sub/conftest.c
-      # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
-      # Solaris 8's {/usr,}/bin/sh.
-      touch sub/conftst$i.h
-    done
-    echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
-
-    # We check with `-c' and `-o' for the sake of the "dashmstdout"
-    # mode.  It turns out that the SunPro C++ compiler does not properly
-    # handle `-M -o', and we need to detect this.  Also, some Intel
-    # versions had trouble with output in subdirs
-    am__obj=sub/conftest.${OBJEXT-o}
-    am__minus_obj="-o $am__obj"
-    case $depmode in
-    gcc)
-      # This depmode causes a compiler race in universal mode.
-      test "$am__universal" = false || continue
-      ;;
-    nosideeffect)
-      # after this tag, mechanisms are not by side-effect, so they'll
-      # only be used when explicitly requested
-      if test "x$enable_dependency_tracking" = xyes; then
-        continue
-      else
-        break
-      fi
-      ;;
-    msvisualcpp | msvcmsys)
-      # This compiler won't grok `-c -o', but also, the minuso test has
-      # not run yet.  These depmodes are late enough in the game, and
-      # so weak that their functioning should not be impacted.
-      am__obj=conftest.${OBJEXT-o}
-      am__minus_obj=
-      ;;
-    none) break ;;
-    esac
-    if depmode=$depmode \
-       source=sub/conftest.c object=$am__obj \
-       depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
-       $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
-         >/dev/null 2>conftest.err &&
-       grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
-       grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
-       grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
-       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
-      # icc doesn't choke on unknown options, it will just issue warnings
-      # or remarks (even with -Werror).  So we grep stderr for any message
-      # that says an option was ignored or not supported.
-      # When given -MP, icc 7.0 and 7.1 complain thusly:
-      #   icc: Command line warning: ignoring option '-M'; no argument required
-      # The diagnosis changed in icc 8.0:
-      #   icc: Command line remark: option '-MP' not supported
-      if (grep 'ignoring option' conftest.err ||
-          grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
-        am_cv_CC_dependencies_compiler_type=$depmode
-        break
-      fi
-    fi
-  done
-
-  cd ..
-  rm -rf conftest.dir
-else
-  am_cv_CC_dependencies_compiler_type=none
-fi
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5
-$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; }
-CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
-
- if
-  test "x$enable_dependency_tracking" != xno \
-  && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then
-  am__fastdepCC_TRUE=
-  am__fastdepCC_FALSE='#'
-else
-  am__fastdepCC_TRUE='#'
-  am__fastdepCC_FALSE=
-fi
-
-
-
-# pkg-config
-
-
-
-
-
-
-if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then
-        if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}pkg-config", so it can be a program name with args.
-set dummy ${ac_tool_prefix}pkg-config; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_path_PKG_CONFIG+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  case $PKG_CONFIG in
-  [\\/]* | ?:[\\/]*)
-  ac_cv_path_PKG_CONFIG="$PKG_CONFIG" # Let the user override the test with a path.
-  ;;
-  *)
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_path_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-  ;;
-esac
-fi
-PKG_CONFIG=$ac_cv_path_PKG_CONFIG
-if test -n "$PKG_CONFIG"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $PKG_CONFIG" >&5
-$as_echo "$PKG_CONFIG" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_path_PKG_CONFIG"; then
-  ac_pt_PKG_CONFIG=$PKG_CONFIG
-  # Extract the first word of "pkg-config", so it can be a program name with args.
-set dummy pkg-config; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_path_ac_pt_PKG_CONFIG+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  case $ac_pt_PKG_CONFIG in
-  [\\/]* | ?:[\\/]*)
-  ac_cv_path_ac_pt_PKG_CONFIG="$ac_pt_PKG_CONFIG" # Let the user override the test with a path.
-  ;;
-  *)
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_path_ac_pt_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-  ;;
-esac
-fi
-ac_pt_PKG_CONFIG=$ac_cv_path_ac_pt_PKG_CONFIG
-if test -n "$ac_pt_PKG_CONFIG"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_pt_PKG_CONFIG" >&5
-$as_echo "$ac_pt_PKG_CONFIG" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-  if test "x$ac_pt_PKG_CONFIG" = x; then
-    PKG_CONFIG=""
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
-    PKG_CONFIG=$ac_pt_PKG_CONFIG
-  fi
-else
-  PKG_CONFIG="$ac_cv_path_PKG_CONFIG"
-fi
-
-fi
-if test -n "$PKG_CONFIG"; then
-        _pkg_min_version=0.9.0
-        { $as_echo "$as_me:${as_lineno-$LINENO}: checking pkg-config is at least version $_pkg_min_version" >&5
-$as_echo_n "checking pkg-config is at least version $_pkg_min_version... " >&6; }
-        if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then
-                { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-        else
-                { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-                PKG_CONFIG=""
-        fi
-fi
-
-# Check whether pkg-config supports Requires.private
-if $PKG_CONFIG --atleast-pkgconfig-version 0.22; then
-   pkgconfig_requires_private="Requires.private"
-else
-   pkgconfig_requires_private="Requires"
-fi
-
-
-
-# doxygen program for documentation building
-
-
-
-# Check whether --enable-doc was given.
-if test "${enable_doc+set}" = set; then :
-  enableval=$enable_doc;
-    if test "x${enableval}" = "xyes" ; then
-       efl_enable_doc="yes"
-    else
-       efl_enable_doc="no"
-    fi
-
-else
-  efl_enable_doc="yes"
-fi
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build documentation" >&5
-$as_echo_n "checking whether to build documentation... " >&6; }
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: ${efl_enable_doc}" >&5
-$as_echo "${efl_enable_doc}" >&6; }
-
-if test "x${efl_enable_doc}" = "xyes" ; then
-
-
-   efl_doxygen="doxygen"
-
-
-# Check whether --with-doxygen was given.
-if test "${with_doxygen+set}" = set; then :
-  withval=$with_doxygen;
-      efl_doxygen=${withval}
-       # Extract the first word of "${efl_doxygen}", so it can be a program name with args.
-set dummy ${efl_doxygen}; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_efl_have_doxygen+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$efl_have_doxygen"; then
-  ac_cv_prog_efl_have_doxygen="$efl_have_doxygen" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_efl_have_doxygen="yes"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-  test -z "$ac_cv_prog_efl_have_doxygen" && ac_cv_prog_efl_have_doxygen="no"
-fi
-fi
-efl_have_doxygen=$ac_cv_prog_efl_have_doxygen
-if test -n "$efl_have_doxygen"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $efl_have_doxygen" >&5
-$as_echo "$efl_have_doxygen" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-       if test "x${efl_have_doxygen}" = "xno" ; then
-          echo "WARNING:"
-          echo "The doxygen program you specified:"
-          echo "${efl_doxygen}"
-          echo "was not found.  Please check the path and make sure "
-          echo "the program exists and is executable."
-          { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: no doxygen detected. Documentation will not be built" >&5
-$as_echo "$as_me: WARNING: no doxygen detected. Documentation will not be built" >&2;}
-       fi
-
-else
-  # Extract the first word of "${efl_doxygen}", so it can be a program name with args.
-set dummy ${efl_doxygen}; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_efl_have_doxygen+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$efl_have_doxygen"; then
-  ac_cv_prog_efl_have_doxygen="$efl_have_doxygen" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_efl_have_doxygen="yes"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-  test -z "$ac_cv_prog_efl_have_doxygen" && ac_cv_prog_efl_have_doxygen="no"
-fi
-fi
-efl_have_doxygen=$ac_cv_prog_efl_have_doxygen
-if test -n "$efl_have_doxygen"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $efl_have_doxygen" >&5
-$as_echo "$efl_have_doxygen" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-       if test "x${efl_have_doxygen}" = "xno" ; then
-          echo "WARNING:"
-          echo "The doxygen program was not found in your execute path."
-          echo "You may have doxygen installed somewhere not covered by your path."
-          echo ""
-          echo "If this is the case make sure you have the packages installed, AND"
-          echo "that the doxygen program is in your execute path (see your"
-          echo "shell manual page on setting the \$PATH environment variable), OR"
-          echo "alternatively, specify the program to use with --with-doxygen."
-          { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: no doxygen detected. Documentation will not be built" >&5
-$as_echo "$as_me: WARNING: no doxygen detected. Documentation will not be built" >&2;}
-       fi
-
-fi
-
-else
-   efl_have_doxygen="no"
-fi
-
-
-
-if ! test "x${efl_have_doxygen}" = "xyes" ; then
-   efl_enable_doc="no"
-fi
-
- if test "x${efl_have_doxygen}" = "xyes"; then
-  EFL_BUILD_DOC_TRUE=
-  EFL_BUILD_DOC_FALSE='#'
-else
-  EFL_BUILD_DOC_TRUE='#'
-  EFL_BUILD_DOC_FALSE=
-fi
-
-
-if test "x$efl_have_doxygen" = "xyes"; then :
-  build_doc="yes"
-else
-  build_doc="no"
-fi
-
-
-### Checks for libraries
-
-# Evil library for compilation on Windows
-
-EFL_EET_BUILD=""
-case "$host_os" in
-   mingw*)
-
-pkg_failed=no
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for EVIL" >&5
-$as_echo_n "checking for EVIL... " >&6; }
-
-if test -n "$EVIL_CFLAGS"; then
-    pkg_cv_EVIL_CFLAGS="$EVIL_CFLAGS"
- elif test -n "$PKG_CONFIG"; then
-    if test -n "$PKG_CONFIG" && \
-    { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"evil >= 1.0.0\""; } >&5
-  ($PKG_CONFIG --exists --print-errors "evil >= 1.0.0") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; }; then
-  pkg_cv_EVIL_CFLAGS=`$PKG_CONFIG --cflags "evil >= 1.0.0" 2>/dev/null`
-else
-  pkg_failed=yes
-fi
- else
-    pkg_failed=untried
-fi
-if test -n "$EVIL_LIBS"; then
-    pkg_cv_EVIL_LIBS="$EVIL_LIBS"
- elif test -n "$PKG_CONFIG"; then
-    if test -n "$PKG_CONFIG" && \
-    { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"evil >= 1.0.0\""; } >&5
-  ($PKG_CONFIG --exists --print-errors "evil >= 1.0.0") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; }; then
-  pkg_cv_EVIL_LIBS=`$PKG_CONFIG --libs "evil >= 1.0.0" 2>/dev/null`
-else
-  pkg_failed=yes
-fi
- else
-    pkg_failed=untried
-fi
-
-
-
-if test $pkg_failed = yes; then
-        { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-
-if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then
-        _pkg_short_errors_supported=yes
-else
-        _pkg_short_errors_supported=no
-fi
-        if test $_pkg_short_errors_supported = yes; then
-                EVIL_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "evil >= 1.0.0" 2>&1`
-        else
-                EVIL_PKG_ERRORS=`$PKG_CONFIG --print-errors "evil >= 1.0.0" 2>&1`
-        fi
-        # Put the nasty error message in config.log where it belongs
-        echo "$EVIL_PKG_ERRORS" >&5
-
-        as_fn_error $? "Package requirements (evil >= 1.0.0) were not met:
-
-$EVIL_PKG_ERRORS
-
-Consider adjusting the PKG_CONFIG_PATH environment variable if you
-installed software in a non-standard prefix.
-
-Alternatively, you may set the environment variables EVIL_CFLAGS
-and EVIL_LIBS to avoid the need to call pkg-config.
-See the pkg-config man page for more details." "$LINENO" 5
-elif test $pkg_failed = untried; then
-        { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-        { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error $? "The pkg-config script could not be found or is too old.  Make sure it
-is in your PATH or set the PKG_CONFIG environment variable to the full
-path to pkg-config.
-
-Alternatively, you may set the environment variables EVIL_CFLAGS
-and EVIL_LIBS to avoid the need to call pkg-config.
-See the pkg-config man page for more details.
-
-To get pkg-config, see <http://pkg-config.freedesktop.org/>.
-See \`config.log' for more details" "$LINENO" 5 ; }
-else
-        EVIL_CFLAGS=$pkg_cv_EVIL_CFLAGS
-        EVIL_LIBS=$pkg_cv_EVIL_LIBS
-        { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-
-fi
-
-$as_echo "#define HAVE_EVIL 1" >>confdefs.h
-
-      requirement_eet="evil ${requirement_eet}"
-      EFL_EET_BUILD="-DEFL_EET_BUILD"
-   ;;
-esac
-
-
-EET_LIBS=""
-case "$host_os" in
-   mingw32ce*)
-      EET_LIBS="-lws2"
-      ;;
-   mingw*)
-      EET_LIBS="-lws2_32"
-      ;;
-esac
-
-
-# Eina library
-
-
-pkg_failed=no
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for EINA" >&5
-$as_echo_n "checking for EINA... " >&6; }
-
-if test -n "$EINA_CFLAGS"; then
-    pkg_cv_EINA_CFLAGS="$EINA_CFLAGS"
- elif test -n "$PKG_CONFIG"; then
-    if test -n "$PKG_CONFIG" && \
-    { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"eina >= 1.2.0\""; } >&5
-  ($PKG_CONFIG --exists --print-errors "eina >= 1.2.0") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; }; then
-  pkg_cv_EINA_CFLAGS=`$PKG_CONFIG --cflags "eina >= 1.2.0" 2>/dev/null`
-else
-  pkg_failed=yes
-fi
- else
-    pkg_failed=untried
-fi
-if test -n "$EINA_LIBS"; then
-    pkg_cv_EINA_LIBS="$EINA_LIBS"
- elif test -n "$PKG_CONFIG"; then
-    if test -n "$PKG_CONFIG" && \
-    { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"eina >= 1.2.0\""; } >&5
-  ($PKG_CONFIG --exists --print-errors "eina >= 1.2.0") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; }; then
-  pkg_cv_EINA_LIBS=`$PKG_CONFIG --libs "eina >= 1.2.0" 2>/dev/null`
-else
-  pkg_failed=yes
-fi
- else
-    pkg_failed=untried
-fi
-
-
-
-if test $pkg_failed = yes; then
-        { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-
-if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then
-        _pkg_short_errors_supported=yes
-else
-        _pkg_short_errors_supported=no
-fi
-        if test $_pkg_short_errors_supported = yes; then
-                EINA_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "eina >= 1.2.0" 2>&1`
-        else
-                EINA_PKG_ERRORS=`$PKG_CONFIG --print-errors "eina >= 1.2.0" 2>&1`
-        fi
-        # Put the nasty error message in config.log where it belongs
-        echo "$EINA_PKG_ERRORS" >&5
-
-        as_fn_error $? "Package requirements (eina >= 1.2.0) were not met:
-
-$EINA_PKG_ERRORS
-
-Consider adjusting the PKG_CONFIG_PATH environment variable if you
-installed software in a non-standard prefix.
-
-Alternatively, you may set the environment variables EINA_CFLAGS
-and EINA_LIBS to avoid the need to call pkg-config.
-See the pkg-config man page for more details." "$LINENO" 5
-elif test $pkg_failed = untried; then
-        { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-        { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error $? "The pkg-config script could not be found or is too old.  Make sure it
-is in your PATH or set the PKG_CONFIG environment variable to the full
-path to pkg-config.
-
-Alternatively, you may set the environment variables EINA_CFLAGS
-and EINA_LIBS to avoid the need to call pkg-config.
-See the pkg-config man page for more details.
-
-To get pkg-config, see <http://pkg-config.freedesktop.org/>.
-See \`config.log' for more details" "$LINENO" 5 ; }
-else
-        EINA_CFLAGS=$pkg_cv_EINA_CFLAGS
-        EINA_LIBS=$pkg_cv_EINA_LIBS
-        { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-
-fi
-requirement_eet="eina >= 1.2.0 ${requirement_eet}"
-
-### Checks for portability layer
-
-
-pkg_failed=no
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for EXOTIC" >&5
-$as_echo_n "checking for EXOTIC... " >&6; }
-
-if test -n "$EXOTIC_CFLAGS"; then
-    pkg_cv_EXOTIC_CFLAGS="$EXOTIC_CFLAGS"
- elif test -n "$PKG_CONFIG"; then
-    if test -n "$PKG_CONFIG" && \
-    { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"exotic\""; } >&5
-  ($PKG_CONFIG --exists --print-errors "exotic") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; }; then
-  pkg_cv_EXOTIC_CFLAGS=`$PKG_CONFIG --cflags "exotic" 2>/dev/null`
-else
-  pkg_failed=yes
-fi
- else
-    pkg_failed=untried
-fi
-if test -n "$EXOTIC_LIBS"; then
-    pkg_cv_EXOTIC_LIBS="$EXOTIC_LIBS"
- elif test -n "$PKG_CONFIG"; then
-    if test -n "$PKG_CONFIG" && \
-    { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"exotic\""; } >&5
-  ($PKG_CONFIG --exists --print-errors "exotic") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; }; then
-  pkg_cv_EXOTIC_LIBS=`$PKG_CONFIG --libs "exotic" 2>/dev/null`
-else
-  pkg_failed=yes
-fi
- else
-    pkg_failed=untried
-fi
-
-
-
-if test $pkg_failed = yes; then
-        { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-
-if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then
-        _pkg_short_errors_supported=yes
-else
-        _pkg_short_errors_supported=no
-fi
-        if test $_pkg_short_errors_supported = yes; then
-                EXOTIC_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "exotic" 2>&1`
-        else
-                EXOTIC_PKG_ERRORS=`$PKG_CONFIG --print-errors "exotic" 2>&1`
-        fi
-        # Put the nasty error message in config.log where it belongs
-        echo "$EXOTIC_PKG_ERRORS" >&5
-
-        enable_exotic="no"
-elif test $pkg_failed = untried; then
-        { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-        enable_exotic="no"
-else
-        EXOTIC_CFLAGS=$pkg_cv_EXOTIC_CFLAGS
-        EXOTIC_LIBS=$pkg_cv_EXOTIC_LIBS
-        { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-        enable_exotic="yes"
-fi
-
-if test "x${enable_exotic}" = "xyes"; then
-    requirement_eet="exotic ${requirement_eet}"
-
-
-$as_echo "#define HAVE_EXOTIC_H 1" >>confdefs.h
-
-fi
-
-# Gnutls support
-
-# Check whether --enable-gnutls was given.
-if test "${enable_gnutls+set}" = set; then :
-  enableval=$enable_gnutls; want_gnutls=$enableval
-
-fi
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to use Gnutls" >&5
-$as_echo_n "checking whether to use Gnutls... " >&6; }
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: ${want_gnutls}" >&5
-$as_echo "${want_gnutls}" >&6; }
-
-# Gnutls library
-have_gnutls="no"
-if test "x${want_gnutls}" = "xyes" || test "x${want_gnutls}" = "xauto" ; then
-
-pkg_failed=no
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNUTLS" >&5
-$as_echo_n "checking for GNUTLS... " >&6; }
-
-if test -n "$GNUTLS_CFLAGS"; then
-    pkg_cv_GNUTLS_CFLAGS="$GNUTLS_CFLAGS"
- elif test -n "$PKG_CONFIG"; then
-    if test -n "$PKG_CONFIG" && \
-    { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"gnutls >= 1.7.6\""; } >&5
-  ($PKG_CONFIG --exists --print-errors "gnutls >= 1.7.6") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; }; then
-  pkg_cv_GNUTLS_CFLAGS=`$PKG_CONFIG --cflags "gnutls >= 1.7.6" 2>/dev/null`
-else
-  pkg_failed=yes
-fi
- else
-    pkg_failed=untried
-fi
-if test -n "$GNUTLS_LIBS"; then
-    pkg_cv_GNUTLS_LIBS="$GNUTLS_LIBS"
- elif test -n "$PKG_CONFIG"; then
-    if test -n "$PKG_CONFIG" && \
-    { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"gnutls >= 1.7.6\""; } >&5
-  ($PKG_CONFIG --exists --print-errors "gnutls >= 1.7.6") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; }; then
-  pkg_cv_GNUTLS_LIBS=`$PKG_CONFIG --libs "gnutls >= 1.7.6" 2>/dev/null`
-else
-  pkg_failed=yes
-fi
- else
-    pkg_failed=untried
-fi
-
-
-
-if test $pkg_failed = yes; then
-        { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-
-if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then
-        _pkg_short_errors_supported=yes
-else
-        _pkg_short_errors_supported=no
-fi
-        if test $_pkg_short_errors_supported = yes; then
-                GNUTLS_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "gnutls >= 1.7.6" 2>&1`
-        else
-                GNUTLS_PKG_ERRORS=`$PKG_CONFIG --print-errors "gnutls >= 1.7.6" 2>&1`
-        fi
-        # Put the nasty error message in config.log where it belongs
-        echo "$GNUTLS_PKG_ERRORS" >&5
-
-        have_gnutls="no"
-elif test $pkg_failed = untried; then
-        { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-        have_gnutls="no"
-else
-        GNUTLS_CFLAGS=$pkg_cv_GNUTLS_CFLAGS
-        GNUTLS_LIBS=$pkg_cv_GNUTLS_LIBS
-        { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-
-       have_gnutls="yes"
-       want_openssl="no"
-
-$as_echo "#define HAVE_GNUTLS 1" >>confdefs.h
-
-       requirement_eet="gnutls ${requirement_eet}"
-
-fi
-   if test "x${have_gnutls}" = "xyes" ; then
-
-
-# Check whether --with-libgcrypt-prefix was given.
-if test "${with_libgcrypt_prefix+set}" = set; then :
-  withval=$with_libgcrypt_prefix; libgcrypt_config_prefix="$withval"
-else
-  libgcrypt_config_prefix=""
-fi
-
-
-# Check whether --with-libgcrypt-exec-prefix was given.
-if test "${with_libgcrypt_exec_prefix+set}" = set; then :
-  withval=$with_libgcrypt_exec_prefix; libgcrypt_config_exec_prefix="$withval"
-else
-  libgcrypt_config_exec_prefix=""
-fi
-
-
-  if test x$libgcrypt_config_exec_prefix != x ; then
-     libgcrypt_config_args="$libgcrypt_config_args --exec-prefix=$libgcrypt_config_exec_prefix"
-     if test x${LIBGCRYPT_CONFIG+set} != xset ; then
-       LIBGCRYPT_CONFIG=$libgcrypt_config_exec_prefix/bin/libgcrypt-config
-     fi
-  fi
-  if test x$libgcrypt_config_prefix != x ; then
-     libgcrypt_config_args="$libgcrypt_config_args --prefix=$libgcrypt_config_prefix"
-     if test x${LIBGCRYPT_CONFIG+set} != xset ; then
-       LIBGCRYPT_CONFIG=$libgcrypt_config_prefix/bin/libgcrypt-config
-     fi
-  fi
-
-  # Extract the first word of "libgcrypt-config", so it can be a program name with args.
-set dummy libgcrypt-config; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_path_LIBGCRYPT_CONFIG+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  case $LIBGCRYPT_CONFIG in
-  [\\/]* | ?:[\\/]*)
-  ac_cv_path_LIBGCRYPT_CONFIG="$LIBGCRYPT_CONFIG" # Let the user override the test with a path.
-  ;;
-  *)
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_path_LIBGCRYPT_CONFIG="$as_dir/$ac_word$ac_exec_ext"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-  test -z "$ac_cv_path_LIBGCRYPT_CONFIG" && ac_cv_path_LIBGCRYPT_CONFIG="no"
-  ;;
-esac
-fi
-LIBGCRYPT_CONFIG=$ac_cv_path_LIBGCRYPT_CONFIG
-if test -n "$LIBGCRYPT_CONFIG"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIBGCRYPT_CONFIG" >&5
-$as_echo "$LIBGCRYPT_CONFIG" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for libgcrypt" >&5
-$as_echo_n "checking for libgcrypt... " >&6; }
-  no_libgcrypt=""
-  if test "$LIBGCRYPT_CONFIG" = "no" ; then
-     no_libgcrypt=yes
-  else
-     LIBGCRYPT_CFLAGS="`$LIBGCRYPT_CONFIG $libgcrypt_config_args --cflags`"
-     LIBGCRYPT_LIBS="`$LIBGCRYPT_CONFIG $libgcrypt_config_args --libs`"
-
-  fi
-  if test "x$no_libgcrypt" = x ; then
-     { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-     have_gnutls="yes"
-  else
-     { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-     if test "$LIBGCRYPT_CONFIG" = "no" ; then
-       echo "*** The libgcrypt-config script installed by libgcrypt could not be found"
-       echo "*** If libgcrypt was installed in PREFIX, make sure PREFIX/bin is in"
-       echo "*** your path, or set the LIBGCRYPT_CONFIG environment variable to the"
-       echo "*** full path to libgcrypt-config."
-     fi
-     LIBGCRYPT_CFLAGS=""
-     LIBGCRYPT_LIBS=""
-     have_gnutls="no"
-  fi
-
-
-
-
-
-
-      if test "x${have_gnutls}" = "xyes" ; then
-         GNUTLS_CFLAGS="${GNUTLS_CFLAGS} ${LIBGCRYPT_CFLAGS}"
-         GNUTLS_LIBS="${GNUTLS_LIBS} ${LIBGCRYPT_LIBS}"
-      fi
-   fi
-fi
-
-# Specific GNUTLS improvement
-
-new_gnutls_api="yes"
-# Check whether --enable-new-gnutls-api was given.
-if test "${enable_new_gnutls_api+set}" = set; then :
-  enableval=$enable_new_gnutls_api; new_gnutls_api=$enableval
-
-fi
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to use gnutls_x509_crt_verify_hash" >&5
-$as_echo_n "checking whether to use gnutls_x509_crt_verify_hash... " >&6; }
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: ${new_gnutls_api}" >&5
-$as_echo "${new_gnutls_api}" >&6; }
-
-if test "x${new_gnutls_api}" = "xyes" ; then
-   tmp_CFLAGS="${CFLAGS}"
-   tmp_LIBS="${LIBS}"
-   CFLAGS="${GNUTLS_CFLAGS}"
-   LIBS="${GNUTLS_LIBS}"
-   { $as_echo "$as_me:${as_lineno-$LINENO}: checking for gnutls_x509_crt_verify_hash in -lgnutls" >&5
-$as_echo_n "checking for gnutls_x509_crt_verify_hash in -lgnutls... " >&6; }
-if test "${ac_cv_lib_gnutls_gnutls_x509_crt_verify_hash+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-lgnutls  $LIBS"
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-/* Override any GCC internal prototype to avoid an error.
-   Use char because int might match the return type of a GCC
-   builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char gnutls_x509_crt_verify_hash ();
-int
-main ()
-{
-return gnutls_x509_crt_verify_hash ();
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
-  ac_cv_lib_gnutls_gnutls_x509_crt_verify_hash=yes
-else
-  ac_cv_lib_gnutls_gnutls_x509_crt_verify_hash=no
-fi
-rm -f core conftest.err conftest.$ac_objext \
-    conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_gnutls_gnutls_x509_crt_verify_hash" >&5
-$as_echo "$ac_cv_lib_gnutls_gnutls_x509_crt_verify_hash" >&6; }
-if test "x$ac_cv_lib_gnutls_gnutls_x509_crt_verify_hash" = x""yes; then :
-   new_gnutls_api="yes"
-else
-   new_gnutls_api="no"
-
-fi
-
-   CFLAGS="${tmp_CFLAGS}"
-   LIBS="${tmp_LIBS}"
-
-   if test "x${new_gnutls_api}" = "xyes"; then
-
-$as_echo "#define EET_USE_NEW_GNUTLS_API 1" >>confdefs.h
-
-   fi
-fi
-
-use_gnutls_privkey_sign_data="no"
-if test "x${want_gnutls}" = "xyes" -o "x${want_gnutls}" = "xauto"; then
-   tmp_CFLAGS="${CFLAGS}"
-   tmp_LIBS="${LIBS}"
-   CFLAGS="${GNUTLS_CFLAGS}"
-   LIBS="${GNUTLS_LIBS}"
-   { $as_echo "$as_me:${as_lineno-$LINENO}: checking for gnutls_privkey_sign_data in -lgnutls" >&5
-$as_echo_n "checking for gnutls_privkey_sign_data in -lgnutls... " >&6; }
-if test "${ac_cv_lib_gnutls_gnutls_privkey_sign_data+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-lgnutls  $LIBS"
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-/* Override any GCC internal prototype to avoid an error.
-   Use char because int might match the return type of a GCC
-   builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char gnutls_privkey_sign_data ();
-int
-main ()
-{
-return gnutls_privkey_sign_data ();
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
-  ac_cv_lib_gnutls_gnutls_privkey_sign_data=yes
-else
-  ac_cv_lib_gnutls_gnutls_privkey_sign_data=no
-fi
-rm -f core conftest.err conftest.$ac_objext \
-    conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_gnutls_gnutls_privkey_sign_data" >&5
-$as_echo "$ac_cv_lib_gnutls_gnutls_privkey_sign_data" >&6; }
-if test "x$ac_cv_lib_gnutls_gnutls_privkey_sign_data" = x""yes; then :
-   use_gnutls_privkey_sign_data="yes"
-else
-   use_gnutls_privkey_sign_data="no"
-
-fi
-
-   CFLAGS="${tmp_CFLAGS}"
-   LIBS="${tmp_LIBS}"
-
-   if test "x${use_gnutls_privkey_sign_data}" = "xyes"; then
-
-$as_echo "#define EET_USE_NEW_PRIVKEY_SIGN_DATA 1" >>confdefs.h
-
-   fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to use gnutls_privkey_sign_data" >&5
-$as_echo_n "checking whether to use gnutls_privkey_sign_data... " >&6; }
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: ${use_gnutls_privkey_sign_data}" >&5
-$as_echo "${use_gnutls_privkey_sign_data}" >&6; }
-
-use_gnutls_pubkey_verify_hash="no"
-if test "x${want_gnutls}" = "xyes" -o "x${want_gnutls}" = "xauto"; then
-   tmp_CFLAGS="${CFLAGS}"
-   tmp_LIBS="${LIBS}"
-   CFLAGS="${GNUTLS_CFLAGS}"
-   LIBS="${GNUTLS_LIBS}"
-   { $as_echo "$as_me:${as_lineno-$LINENO}: checking for gnutls_pubkey_verify_hash in -lgnutls" >&5
-$as_echo_n "checking for gnutls_pubkey_verify_hash in -lgnutls... " >&6; }
-if test "${ac_cv_lib_gnutls_gnutls_pubkey_verify_hash+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-lgnutls  $LIBS"
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-/* Override any GCC internal prototype to avoid an error.
-   Use char because int might match the return type of a GCC
-   builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char gnutls_pubkey_verify_hash ();
-int
-main ()
-{
-return gnutls_pubkey_verify_hash ();
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
-  ac_cv_lib_gnutls_gnutls_pubkey_verify_hash=yes
-else
-  ac_cv_lib_gnutls_gnutls_pubkey_verify_hash=no
-fi
-rm -f core conftest.err conftest.$ac_objext \
-    conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_gnutls_gnutls_pubkey_verify_hash" >&5
-$as_echo "$ac_cv_lib_gnutls_gnutls_pubkey_verify_hash" >&6; }
-if test "x$ac_cv_lib_gnutls_gnutls_pubkey_verify_hash" = x""yes; then :
-   use_gnutls_pubkey_verify_hash="yes"
-else
-   use_gnutls_pubkey_verify_hash="no"
-
-fi
-
-   CFLAGS="${tmp_CFLAGS}"
-   LIBS="${tmp_LIBS}"
-
-   if test "x${use_gnutls_pubkey_verify_hash}" = "xyes"; then
-
-$as_echo "#define EET_USE_NEW_PUBKEY_VERIFY_HASH 1" >>confdefs.h
-
-   fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to use gnutls_pubkey_verify_hash" >&5
-$as_echo_n "checking whether to use gnutls_pubkey_verify_hash... " >&6; }
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: ${use_gnutls_pubkey_verify_hash}" >&5
-$as_echo "${use_gnutls_pubkey_verify_hash}" >&6; }
-
-# Openssl library
-have_openssl="no"
-if test "x${want_openssl}" = "xyes" || test "x${want_openssl}" = "xauto" ; then
-
-pkg_failed=no
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for OPENSSL" >&5
-$as_echo_n "checking for OPENSSL... " >&6; }
-
-if test -n "$OPENSSL_CFLAGS"; then
-    pkg_cv_OPENSSL_CFLAGS="$OPENSSL_CFLAGS"
- elif test -n "$PKG_CONFIG"; then
-    if test -n "$PKG_CONFIG" && \
-    { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"openssl\""; } >&5
-  ($PKG_CONFIG --exists --print-errors "openssl") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; }; then
-  pkg_cv_OPENSSL_CFLAGS=`$PKG_CONFIG --cflags "openssl" 2>/dev/null`
-else
-  pkg_failed=yes
-fi
- else
-    pkg_failed=untried
-fi
-if test -n "$OPENSSL_LIBS"; then
-    pkg_cv_OPENSSL_LIBS="$OPENSSL_LIBS"
- elif test -n "$PKG_CONFIG"; then
-    if test -n "$PKG_CONFIG" && \
-    { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"openssl\""; } >&5
-  ($PKG_CONFIG --exists --print-errors "openssl") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; }; then
-  pkg_cv_OPENSSL_LIBS=`$PKG_CONFIG --libs "openssl" 2>/dev/null`
-else
-  pkg_failed=yes
-fi
- else
-    pkg_failed=untried
-fi
-
-
-
-if test $pkg_failed = yes; then
-        { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-
-if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then
-        _pkg_short_errors_supported=yes
-else
-        _pkg_short_errors_supported=no
-fi
-        if test $_pkg_short_errors_supported = yes; then
-                OPENSSL_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "openssl" 2>&1`
-        else
-                OPENSSL_PKG_ERRORS=`$PKG_CONFIG --print-errors "openssl" 2>&1`
-        fi
-        # Put the nasty error message in config.log where it belongs
-        echo "$OPENSSL_PKG_ERRORS" >&5
-
-        have_openssl="no"
-elif test $pkg_failed = untried; then
-        { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-        have_openssl="no"
-else
-        OPENSSL_CFLAGS=$pkg_cv_OPENSSL_CFLAGS
-        OPENSSL_LIBS=$pkg_cv_OPENSSL_LIBS
-        { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-
-       have_openssl="yes"
-
-$as_echo "#define HAVE_OPENSSL 1" >>confdefs.h
-
-       requirement_eet="openssl ${requirement_eet}"
-
-fi
-fi
-
-if test "x${have_gnutls}" = "xyes" ; then
-   secure_layer="GnuTLS"
-elif test "x${have_openssl}" = "xyes" ; then
-   secure_layer="OpenSSL"
-else
-   secure_layer="no"
-fi
-
-have_cipher="no"
-if test "x${have_gnutls}" = "xyes" && test "x${want_cipher}" = "xyes" ; then
-   have_cipher="yes"
-
-$as_echo "#define HAVE_CIPHER 1" >>confdefs.h
-
-elif test "x${have_openssl}" = "xyes" && test "x${want_cipher}" = "xyes" ; then
-   have_cipher="yes"
-
-$as_echo "#define HAVE_CIPHER 1" >>confdefs.h
-
-fi
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to activate cipher support in eet" >&5
-$as_echo_n "checking whether to activate cipher support in eet... " >&6; }
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: ${have_cipher}" >&5
-$as_echo "${have_cipher}" >&6; }
-
-have_signature="no"
-if test "x${have_gnutls}" = "xyes" && test "x${want_signature}" = "xyes" ; then
-   have_signature="yes"
-
-$as_echo "#define HAVE_SIGNATURE 1" >>confdefs.h
-
-elif test "x${have_openssl}" = "xyes" && test "x${want_signature}" = "xyes" ; then
-   have_signature="yes"
-
-$as_echo "#define HAVE_SIGNATURE 1" >>confdefs.h
-
-fi
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to activate signature support in eet" >&5
-$as_echo_n "checking whether to activate signature support in eet... " >&6; }
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: ${have_signature}" >&5
-$as_echo "${have_signature}" >&6; }
-
-### Checks for header files
-
-ac_fn_c_check_header_mongrel "$LINENO" "zlib.h" "ac_cv_header_zlib_h" "$ac_includes_default"
-if test "x$ac_cv_header_zlib_h" = x""yes; then :
-  dummy="yes"
-else
-  as_fn_error $? "\"Cannot find zlib.h. Make sure your CFLAGS environment variable contains include lines for the location of this file\"" "$LINENO" 5
-fi
-
-
-
-ac_fn_c_check_header_mongrel "$LINENO" "jpeglib.h" "ac_cv_header_jpeglib_h" "$ac_includes_default"
-if test "x$ac_cv_header_jpeglib_h" = x""yes; then :
-  dummy="yes"
-else
-  as_fn_error $? "\"Cannot find jpeglib.h. Make sure your CFLAGS environment variable contains include lines for the location of this file\"" "$LINENO" 5
-fi
-
-
-
-for ac_header in netinet/in.h unistd.h
-do :
-  as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
-ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default"
-if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
-  cat >>confdefs.h <<_ACEOF
-#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
-_ACEOF
-
-fi
-
-done
-
-
-
-default_max="4096"
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for PATH_MAX in limits.h" >&5
-$as_echo_n "checking for PATH_MAX in limits.h... " >&6; }
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-#include <limits.h>
-
-int
-main ()
-{
-
-int i = PATH_MAX;
-
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-else
-
-
-cat >>confdefs.h <<_ACEOF
-#define PATH_MAX ${default_max}
-_ACEOF
-
-    { $as_echo "$as_me:${as_lineno-$LINENO}: result: no: using ${default_max}" >&5
-$as_echo "no: using ${default_max}" >&6; }
-
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-
-
-### Checks for types
-
-
-### Checks for structures
-
-
-### Checks for compiler characteristics
-if test "x$CC" != xcc; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC and cc understand -c and -o together" >&5
-$as_echo_n "checking whether $CC and cc understand -c and -o together... " >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether cc understands -c and -o together" >&5
-$as_echo_n "checking whether cc understands -c and -o together... " >&6; }
-fi
-set dummy $CC; ac_cc=`$as_echo "$2" |
-                      sed 's/[^a-zA-Z0-9_]/_/g;s/^[0-9]/_/'`
-if eval "test \"\${ac_cv_prog_cc_${ac_cc}_c_o+set}\"" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-# Make sure it works both with $CC and with simple cc.
-# We do the test twice because some compilers refuse to overwrite an
-# existing .o file with -o, though they will create one.
-ac_try='$CC -c conftest.$ac_ext -o conftest2.$ac_objext >&5'
-rm -f conftest2.*
-if { { case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; } &&
-   test -f conftest2.$ac_objext && { { case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; };
-then
-  eval ac_cv_prog_cc_${ac_cc}_c_o=yes
-  if test "x$CC" != xcc; then
-    # Test first that cc exists at all.
-    if { ac_try='cc -c conftest.$ac_ext >&5'
-  { { case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; }; }; then
-      ac_try='cc -c conftest.$ac_ext -o conftest2.$ac_objext >&5'
-      rm -f conftest2.*
-      if { { case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; } &&
-         test -f conftest2.$ac_objext && { { case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; };
-      then
-        # cc works too.
-        :
-      else
-        # cc exists but doesn't like -o.
-        eval ac_cv_prog_cc_${ac_cc}_c_o=no
-      fi
-    fi
-  fi
-else
-  eval ac_cv_prog_cc_${ac_cc}_c_o=no
-fi
-rm -f core conftest*
-
-fi
-if eval test \$ac_cv_prog_cc_${ac_cc}_c_o = yes; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-
-$as_echo "#define NO_MINUS_C_MINUS_O 1" >>confdefs.h
-
-fi
-
-# FIXME: we rely on the cache variable name because
-# there is no other way.
-set dummy $CC
-am_cc=`echo $2 | sed 's/[^a-zA-Z0-9_]/_/g;s/^[0-9]/_/'`
-eval am_t=\$ac_cv_prog_cc_${am_cc}_c_o
-if test "$am_t" != yes; then
-   # Losing compiler, so override with the script.
-   # FIXME: It is wrong to rewrite CC.
-   # But if we don't then we get into trouble of one sort or another.
-   # A longer-term fix would be to have automake use am__CC in this case,
-   # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)"
-   CC="$am_aux_dir/compile $CC"
-fi
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for an ANSI C-conforming const" >&5
-$as_echo_n "checking for an ANSI C-conforming const... " >&6; }
-if test "${ac_cv_c_const+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-int
-main ()
-{
-/* FIXME: Include the comments suggested by Paul. */
-#ifndef __cplusplus
-  /* Ultrix mips cc rejects this.  */
-  typedef int charset[2];
-  const charset cs;
-  /* SunOS 4.1.1 cc rejects this.  */
-  char const *const *pcpcc;
-  char **ppc;
-  /* NEC SVR4.0.2 mips cc rejects this.  */
-  struct point {int x, y;};
-  static struct point const zero = {0,0};
-  /* AIX XL C 1.02.0.0 rejects this.
-     It does not let you subtract one const X* pointer from another in
-     an arm of an if-expression whose if-part is not a constant
-     expression */
-  const char *g = "string";
-  pcpcc = &g + (g ? g-g : 0);
-  /* HPUX 7.0 cc rejects these. */
-  ++pcpcc;
-  ppc = (char**) pcpcc;
-  pcpcc = (char const *const *) ppc;
-  { /* SCO 3.2v4 cc rejects this.  */
-    char *t;
-    char const *s = 0 ? (char *) 0 : (char const *) 0;
-
-    *t++ = 0;
-    if (s) return 0;
-  }
-  { /* Someone thinks the Sun supposedly-ANSI compiler will reject this.  */
-    int x[] = {25, 17};
-    const int *foo = &x[0];
-    ++foo;
-  }
-  { /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */
-    typedef const int *iptr;
-    iptr p = 0;
-    ++p;
-  }
-  { /* AIX XL C 1.02.0.0 rejects this saying
-       "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */
-    struct s { int j; const int *ap[3]; };
-    struct s *b; b->j = 5;
-  }
-  { /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */
-    const int foo = 10;
-    if (!foo) return 0;
-  }
-  return !cs[0] && !zero.x;
-#endif
-
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-  ac_cv_c_const=yes
-else
-  ac_cv_c_const=no
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_const" >&5
-$as_echo "$ac_cv_c_const" >&6; }
-if test $ac_cv_c_const = no; then
-
-$as_echo "#define const /**/" >>confdefs.h
-
-fi
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for inline" >&5
-$as_echo_n "checking for inline... " >&6; }
-if test "${ac_cv_c_inline+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  ac_cv_c_inline=no
-for ac_kw in inline __inline__ __inline; do
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-#ifndef __cplusplus
-typedef int foo_t;
-static $ac_kw foo_t static_foo () {return 0; }
-$ac_kw foo_t foo () {return 0; }
-#endif
-
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-  ac_cv_c_inline=$ac_kw
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-  test "$ac_cv_c_inline" != no && break
-done
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_inline" >&5
-$as_echo "$ac_cv_c_inline" >&6; }
-
-case $ac_cv_c_inline in
-  inline | yes) ;;
-  *)
-    case $ac_cv_c_inline in
-      no) ac_val=;;
-      *) ac_val=$ac_cv_c_inline;;
-    esac
-    cat >>confdefs.h <<_ACEOF
-#ifndef __cplusplus
-#define inline $ac_val
-#endif
-_ACEOF
-    ;;
-esac
-
-   case $ac_cv_prog_cc_stdc in #(
-  no) :
-    ac_cv_prog_cc_c99=no; ac_cv_prog_cc_c89=no ;; #(
-  *) :
-    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C99" >&5
-$as_echo_n "checking for $CC option to accept ISO C99... " >&6; }
-if test "${ac_cv_prog_cc_c99+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  ac_cv_prog_cc_c99=no
-ac_save_CC=$CC
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-#include <stdarg.h>
-#include <stdbool.h>
-#include <stdlib.h>
-#include <wchar.h>
-#include <stdio.h>
-
-// Check varargs macros.  These examples are taken from C99 6.10.3.5.
-#define debug(...) fprintf (stderr, __VA_ARGS__)
-#define showlist(...) puts (#__VA_ARGS__)
-#define report(test,...) ((test) ? puts (#test) : printf (__VA_ARGS__))
-static void
-test_varargs_macros (void)
-{
-  int x = 1234;
-  int y = 5678;
-  debug ("Flag");
-  debug ("X = %d\n", x);
-  showlist (The first, second, and third items.);
-  report (x>y, "x is %d but y is %d", x, y);
-}
-
-// Check long long types.
-#define BIG64 18446744073709551615ull
-#define BIG32 4294967295ul
-#define BIG_OK (BIG64 / BIG32 == 4294967297ull && BIG64 % BIG32 == 0)
-#if !BIG_OK
-  your preprocessor is broken;
-#endif
-#if BIG_OK
-#else
-  your preprocessor is broken;
-#endif
-static long long int bignum = -9223372036854775807LL;
-static unsigned long long int ubignum = BIG64;
-
-struct incomplete_array
-{
-  int datasize;
-  double data[];
-};
-
-struct named_init {
-  int number;
-  const wchar_t *name;
-  double average;
-};
-
-typedef const char *ccp;
-
-static inline int
-test_restrict (ccp restrict text)
-{
-  // See if C++-style comments work.
-  // Iterate through items via the restricted pointer.
-  // Also check for declarations in for loops.
-  for (unsigned int i = 0; *(text+i) != '\0'; ++i)
-    continue;
-  return 0;
-}
-
-// Check varargs and va_copy.
-static void
-test_varargs (const char *format, ...)
-{
-  va_list args;
-  va_start (args, format);
-  va_list args_copy;
-  va_copy (args_copy, args);
-
-  const char *str;
-  int number;
-  float fnumber;
-
-  while (*format)
-    {
-      switch (*format++)
-        {
-        case 's': // string
-          str = va_arg (args_copy, const char *);
-          break;
-        case 'd': // int
-          number = va_arg (args_copy, int);
-          break;
-        case 'f': // float
-          fnumber = va_arg (args_copy, double);
-          break;
-        default:
-          break;
-        }
-    }
-  va_end (args_copy);
-  va_end (args);
-}
-
-int
-main ()
-{
-
-  // Check bool.
-  _Bool success = false;
-
-  // Check restrict.
-  if (test_restrict ("String literal") == 0)
-    success = true;
-  char *restrict newvar = "Another string";
-
-  // Check varargs.
-  test_varargs ("s, d' f .", "string", 65, 34.234);
-  test_varargs_macros ();
-
-  // Check flexible array members.
-  struct incomplete_array *ia =
-    malloc (sizeof (struct incomplete_array) + (sizeof (double) * 10));
-  ia->datasize = 10;
-  for (int i = 0; i < ia->datasize; ++i)
-    ia->data[i] = i * 1.234;
-
-  // Check named initializers.
-  struct named_init ni = {
-    .number = 34,
-    .name = L"Test wide string",
-    .average = 543.34343,
-  };
-
-  ni.number = 58;
-
-  int dynamic_array[ni.number];
-  dynamic_array[ni.number - 1] = 543;
-
-  // work around unused variable warnings
-  return (!success || bignum == 0LL || ubignum == 0uLL || newvar[0] == 'x'
-          || dynamic_array[ni.number - 1] != 543);
-
-  ;
-  return 0;
-}
-_ACEOF
-for ac_arg in '' -std=gnu99 -std=c99 -c99 -AC99 -xc99=all -qlanglvl=extc99
-do
-  CC="$ac_save_CC $ac_arg"
-  if ac_fn_c_try_compile "$LINENO"; then :
-  ac_cv_prog_cc_c99=$ac_arg
-fi
-rm -f core conftest.err conftest.$ac_objext
-  test "x$ac_cv_prog_cc_c99" != "xno" && break
-done
-rm -f conftest.$ac_ext
-CC=$ac_save_CC
-
-fi
-# AC_CACHE_VAL
-case "x$ac_cv_prog_cc_c99" in
-  x)
-    { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5
-$as_echo "none needed" >&6; } ;;
-  xno)
-    { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5
-$as_echo "unsupported" >&6; } ;;
-  *)
-    CC="$CC $ac_cv_prog_cc_c99"
-    { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c99" >&5
-$as_echo "$ac_cv_prog_cc_c99" >&6; } ;;
-esac
-if test "x$ac_cv_prog_cc_c99" != xno; then :
-  ac_cv_prog_cc_stdc=$ac_cv_prog_cc_c99
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5
-$as_echo_n "checking for $CC option to accept ISO C89... " >&6; }
-if test "${ac_cv_prog_cc_c89+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  ac_cv_prog_cc_c89=no
-ac_save_CC=$CC
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-#include <stdarg.h>
-#include <stdio.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-/* Most of the following tests are stolen from RCS 5.7's src/conf.sh.  */
-struct buf { int x; };
-FILE * (*rcsopen) (struct buf *, struct stat *, int);
-static char *e (p, i)
-     char **p;
-     int i;
-{
-  return p[i];
-}
-static char *f (char * (*g) (char **, int), char **p, ...)
-{
-  char *s;
-  va_list v;
-  va_start (v,p);
-  s = g (p, va_arg (v,int));
-  va_end (v);
-  return s;
-}
-
-/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default.  It has
-   function prototypes and stuff, but not '\xHH' hex character constants.
-   These don't provoke an error unfortunately, instead are silently treated
-   as 'x'.  The following induces an error, until -std is added to get
-   proper ANSI mode.  Curiously '\x00'!='x' always comes out true, for an
-   array size at least.  It's necessary to write '\x00'==0 to get something
-   that's true only with -std.  */
-int osf4_cc_array ['\x00' == 0 ? 1 : -1];
-
-/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
-   inside strings and character constants.  */
-#define FOO(x) 'x'
-int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
-
-int test (int i, double x);
-struct s1 {int (*f) (int a);};
-struct s2 {int (*f) (double a);};
-int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
-int argc;
-char **argv;
-int
-main ()
-{
-return f (e, argv, 0) != argv[0]  ||  f (e, argv, 1) != argv[1];
-  ;
-  return 0;
-}
-_ACEOF
-for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \
-        -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
-do
-  CC="$ac_save_CC $ac_arg"
-  if ac_fn_c_try_compile "$LINENO"; then :
-  ac_cv_prog_cc_c89=$ac_arg
-fi
-rm -f core conftest.err conftest.$ac_objext
-  test "x$ac_cv_prog_cc_c89" != "xno" && break
-done
-rm -f conftest.$ac_ext
-CC=$ac_save_CC
-
-fi
-# AC_CACHE_VAL
-case "x$ac_cv_prog_cc_c89" in
-  x)
-    { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5
-$as_echo "none needed" >&6; } ;;
-  xno)
-    { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5
-$as_echo "unsupported" >&6; } ;;
-  *)
-    CC="$CC $ac_cv_prog_cc_c89"
-    { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5
-$as_echo "$ac_cv_prog_cc_c89" >&6; } ;;
-esac
-if test "x$ac_cv_prog_cc_c89" != xno; then :
-  ac_cv_prog_cc_stdc=$ac_cv_prog_cc_c89
-else
-  ac_cv_prog_cc_stdc=no
-fi
-
-fi
- ;;
-esac
-  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO Standard C" >&5
-$as_echo_n "checking for $CC option to accept ISO Standard C... " >&6; }
-  if test "${ac_cv_prog_cc_stdc+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-fi
-
-  case $ac_cv_prog_cc_stdc in #(
-  no) :
-    { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5
-$as_echo "unsupported" >&6; } ;; #(
-  '') :
-    { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5
-$as_echo "none needed" >&6; } ;; #(
-  *) :
-    { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_stdc" >&5
-$as_echo "$ac_cv_prog_cc_stdc" >&6; } ;;
-esac
-
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for __attribute__" >&5
-$as_echo_n "checking for __attribute__... " >&6; }
-
-if test "${ac_cv___attribute__+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-#include <stdlib.h>
-
-int func(int x);
-int foo(int x __attribute__ ((unused)))
-{
-   exit(1);
-}
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-  ac_cv___attribute__="yes"
-else
-  ac_cv___attribute__="no"
-
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv___attribute__" >&5
-$as_echo "$ac_cv___attribute__" >&6; }
-
-if test "x${ac_cv___attribute__}" = "xyes" ; then
-
-$as_echo "#define HAVE___ATTRIBUTE__ 1" >>confdefs.h
-
-
-$as_echo "#define __UNUSED__ __attribute__((unused))" >>confdefs.h
-
-  else
-
-$as_echo "#define __UNUSED__ /**/" >>confdefs.h
-
-fi
-
-
-
-# Check whether the null pointer is zero on this arch
-if test "$cross_compiling" = yes; then :
-
-    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Cannot check when cross-compiling -- assuming null is okay" >&5
-$as_echo "$as_me: WARNING: Cannot check when cross-compiling -- assuming null is okay" >&2;}
-    have_null="yes"
-
-else
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-#include <stdlib.h>
-#include <inttypes.h>
-int main (int argc, char **argv) {
-  void *foo = NULL;
-  uintptr_t bar = (uintptr_t)foo;
-  return (uintptr_t)foo;
-}
-
-_ACEOF
-if ac_fn_c_try_run "$LINENO"; then :
-  have_null="yes"
-else
-  have_null="no"
-fi
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
-  conftest.$ac_objext conftest.beam conftest.$ac_ext
-fi
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking value of the null pointer" >&5
-$as_echo_n "checking value of the null pointer... " >&6; }
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: ${have_null}" >&5
-$as_echo "${have_null}" >&6; }
-
-if test ! "x${have_null}" = "xyes" ; then
-   { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Your system is a bit too funny, eet might not work properly" >&5
-$as_echo "$as_me: WARNING: Your system is a bit too funny, eet might not work properly" >&2;}
-fi
-
-# These are needed for fmemopen/open_memstream
-
-$as_echo "#define _GNU_SOURCE /**/" >>confdefs.h
-
-
-EET_CPPFLAGS=""
-EET_CFLAGS=""
-case "$host_os" in
-   mingw32ce*)
-      EET_CPPFLAGS="-D_WIN32_WCE=0x0420"
-      ;;
-   mingw*)
-      EET_CPPFLAGS="-D_WIN32_WINNT=0x0501"
-      ;;
-esac
-
-
-
-
-### Checks for linker characteristics
-
-# use --enable-auto-import on Windows
-
-lt_enable_auto_import=""
-case "$host_os" in
-   mingw*)
-      lt_enable_auto_import="-Wl,--enable-auto-import"
-      ;;
-esac
-
-
-case "${host_os}" in
-   openbsd*)
-      ;;
-   *)
-
-
-CFLAGS_save="${CFLAGS}"
-CFLAGS="${CFLAGS} -Wl,--as-needed"
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the compiler supports -Wl,--as-needed" >&5
-$as_echo_n "checking whether the compiler supports -Wl,--as-needed... " >&6; }
-
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
-  have_flag="yes"
-else
-  have_flag="no"
-fi
-rm -f core conftest.err conftest.$ac_objext \
-    conftest$ac_exeext conftest.$ac_ext
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: ${have_flag}" >&5
-$as_echo "${have_flag}" >&6; }
-
-if test "x${have_flag}" = "xno" ; then
-   CFLAGS="${CFLAGS_save}"
-fi
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-
-      ;;
-esac
-
-
-### Checks for library functions
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing strerror" >&5
-$as_echo_n "checking for library containing strerror... " >&6; }
-if test "${ac_cv_search_strerror+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  ac_func_search_save_LIBS=$LIBS
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-/* Override any GCC internal prototype to avoid an error.
-   Use char because int might match the return type of a GCC
-   builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char strerror ();
-int
-main ()
-{
-return strerror ();
-  ;
-  return 0;
-}
-_ACEOF
-for ac_lib in '' cposix; do
-  if test -z "$ac_lib"; then
-    ac_res="none required"
-  else
-    ac_res=-l$ac_lib
-    LIBS="-l$ac_lib  $ac_func_search_save_LIBS"
-  fi
-  if ac_fn_c_try_link "$LINENO"; then :
-  ac_cv_search_strerror=$ac_res
-fi
-rm -f core conftest.err conftest.$ac_objext \
-    conftest$ac_exeext
-  if test "${ac_cv_search_strerror+set}" = set; then :
-  break
-fi
-done
-if test "${ac_cv_search_strerror+set}" = set; then :
-
-else
-  ac_cv_search_strerror=no
-fi
-rm conftest.$ac_ext
-LIBS=$ac_func_search_save_LIBS
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_strerror" >&5
-$as_echo "$ac_cv_search_strerror" >&6; }
-ac_res=$ac_cv_search_strerror
-if test "$ac_res" != no; then :
-  test "$ac_res" = "none required" || LIBS="$ac_res $LIBS"
-
-fi
-
-# The Ultrix 4.2 mips builtin alloca declared by alloca.h only works
-# for constant arguments.  Useless!
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for working alloca.h" >&5
-$as_echo_n "checking for working alloca.h... " >&6; }
-if test "${ac_cv_working_alloca_h+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-#include <alloca.h>
-int
-main ()
-{
-char *p = (char *) alloca (2 * sizeof (int));
-                          if (p) return 0;
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
-  ac_cv_working_alloca_h=yes
-else
-  ac_cv_working_alloca_h=no
-fi
-rm -f core conftest.err conftest.$ac_objext \
-    conftest$ac_exeext conftest.$ac_ext
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_working_alloca_h" >&5
-$as_echo "$ac_cv_working_alloca_h" >&6; }
-if test $ac_cv_working_alloca_h = yes; then
-
-$as_echo "#define HAVE_ALLOCA_H 1" >>confdefs.h
-
-fi
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for alloca" >&5
-$as_echo_n "checking for alloca... " >&6; }
-if test "${ac_cv_func_alloca_works+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-#ifdef __GNUC__
-# define alloca __builtin_alloca
-#else
-# ifdef _MSC_VER
-#  include <malloc.h>
-#  define alloca _alloca
-# else
-#  ifdef HAVE_ALLOCA_H
-#   include <alloca.h>
-#  else
-#   ifdef _AIX
- #pragma alloca
-#   else
-#    ifndef alloca /* predefined by HP cc +Olibcalls */
-char *alloca ();
-#    endif
-#   endif
-#  endif
-# endif
-#endif
-
-int
-main ()
-{
-char *p = (char *) alloca (1);
-                                    if (p) return 0;
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
-  ac_cv_func_alloca_works=yes
-else
-  ac_cv_func_alloca_works=no
-fi
-rm -f core conftest.err conftest.$ac_objext \
-    conftest$ac_exeext conftest.$ac_ext
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_alloca_works" >&5
-$as_echo "$ac_cv_func_alloca_works" >&6; }
-
-if test $ac_cv_func_alloca_works = yes; then
-
-$as_echo "#define HAVE_ALLOCA 1" >>confdefs.h
-
-else
-  # The SVR3 libPW and SVR4 libucb both contain incompatible functions
-# that cause trouble.  Some versions do not even contain alloca or
-# contain a buggy version.  If you still want to use their alloca,
-# use ar to extract alloca.o from them instead of compiling alloca.c.
-
-ALLOCA=\${LIBOBJDIR}alloca.$ac_objext
-
-$as_echo "#define C_ALLOCA 1" >>confdefs.h
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether \`alloca.c' needs Cray hooks" >&5
-$as_echo_n "checking whether \`alloca.c' needs Cray hooks... " >&6; }
-if test "${ac_cv_os_cray+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-#if defined CRAY && ! defined CRAY2
-webecray
-#else
-wenotbecray
-#endif
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-  $EGREP "webecray" >/dev/null 2>&1; then :
-  ac_cv_os_cray=yes
-else
-  ac_cv_os_cray=no
-fi
-rm -f conftest*
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_os_cray" >&5
-$as_echo "$ac_cv_os_cray" >&6; }
-if test $ac_cv_os_cray = yes; then
-  for ac_func in _getb67 GETB67 getb67; do
-    as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
-ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var"
-if eval test \"x\$"$as_ac_var"\" = x"yes"; then :
-
-cat >>confdefs.h <<_ACEOF
-#define CRAY_STACKSEG_END $ac_func
-_ACEOF
-
-    break
-fi
-
-  done
-fi
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking stack direction for C alloca" >&5
-$as_echo_n "checking stack direction for C alloca... " >&6; }
-if test "${ac_cv_c_stack_direction+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test "$cross_compiling" = yes; then :
-  ac_cv_c_stack_direction=0
-else
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-$ac_includes_default
-int
-find_stack_direction ()
-{
-  static char *addr = 0;
-  auto char dummy;
-  if (addr == 0)
-    {
-      addr = &dummy;
-      return find_stack_direction ();
-    }
-  else
-    return (&dummy > addr) ? 1 : -1;
-}
-
-int
-main ()
-{
-  return find_stack_direction () < 0;
-}
-_ACEOF
-if ac_fn_c_try_run "$LINENO"; then :
-  ac_cv_c_stack_direction=1
-else
-  ac_cv_c_stack_direction=-1
-fi
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
-  conftest.$ac_objext conftest.beam conftest.$ac_ext
-fi
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_stack_direction" >&5
-$as_echo "$ac_cv_c_stack_direction" >&6; }
-cat >>confdefs.h <<_ACEOF
-#define STACK_DIRECTION $ac_cv_c_stack_direction
-_ACEOF
-
-
-fi
-
-
-for ac_func in fmemopen open_memstream realpath
-do :
-  as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
-ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var"
-if eval test \"x\$"$as_ac_var"\" = x"yes"; then :
-  cat >>confdefs.h <<_ACEOF
-#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1
-_ACEOF
-
-fi
-done
-
-
-
-
-ac_fn_c_check_header_mongrel "$LINENO" "fnmatch.h" "ac_cv_header_fnmatch_h" "$ac_includes_default"
-if test "x$ac_cv_header_fnmatch_h" = x""yes; then :
-  _efl_have_fnmatch="yes"
-else
-  _efl_have_fnmatch="no"
-fi
-
-
-
-if test "x${_efl_have_fnmatch}" = "xyes" ; then
-   { $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing fnmatch" >&5
-$as_echo_n "checking for library containing fnmatch... " >&6; }
-if test "${ac_cv_search_fnmatch+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  ac_func_search_save_LIBS=$LIBS
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-/* Override any GCC internal prototype to avoid an error.
-   Use char because int might match the return type of a GCC
-   builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char fnmatch ();
-int
-main ()
-{
-return fnmatch ();
-  ;
-  return 0;
-}
-_ACEOF
-for ac_lib in '' fnmatch evil iberty; do
-  if test -z "$ac_lib"; then
-    ac_res="none required"
-  else
-    ac_res=-l$ac_lib
-    LIBS="-l$ac_lib  $ac_func_search_save_LIBS"
-  fi
-  if ac_fn_c_try_link "$LINENO"; then :
-  ac_cv_search_fnmatch=$ac_res
-fi
-rm -f core conftest.err conftest.$ac_objext \
-    conftest$ac_exeext
-  if test "${ac_cv_search_fnmatch+set}" = set; then :
-  break
-fi
-done
-if test "${ac_cv_search_fnmatch+set}" = set; then :
-
-else
-  ac_cv_search_fnmatch=no
-fi
-rm conftest.$ac_ext
-LIBS=$ac_func_search_save_LIBS
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_fnmatch" >&5
-$as_echo "$ac_cv_search_fnmatch" >&6; }
-ac_res=$ac_cv_search_fnmatch
-if test "$ac_res" != no; then :
-  test "$ac_res" = "none required" || LIBS="$ac_res $LIBS"
-  _efl_have_fnmatch="yes"
-else
-  _efl_have_fnmatch="no"
-fi
-
-fi
-
-EFL_FNMATCH_LIBS=""
-
-if (! test "x${ac_cv_search_fnmatch}" = "xnone required") && (! test "x${ac_cv_search_fnmatch}" = "xno") && (! test "x${ac_cv_search_fnmatch}" = "x-levil") ; then
-   EFL_FNMATCH_LIBS=${ac_cv_search_fnmatch}
-fi
-
-if test "x${_efl_have_fnmatch}" != "xyes" -a "x${enable_exotic}" = "xyes"; then
-   LDFLAGS_SAVE="$LDFLAGS"
-   LDFLAGS="$LDFLAGS $EXOTIC_LIBS"
-   { $as_echo "$as_me:${as_lineno-$LINENO}: checking for fnmatch in -lexotic" >&5
-$as_echo_n "checking for fnmatch in -lexotic... " >&6; }
-if test "${ac_cv_lib_exotic_fnmatch+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-lexotic  $LIBS"
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-/* Override any GCC internal prototype to avoid an error.
-   Use char because int might match the return type of a GCC
-   builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char fnmatch ();
-int
-main ()
-{
-return fnmatch ();
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
-  ac_cv_lib_exotic_fnmatch=yes
-else
-  ac_cv_lib_exotic_fnmatch=no
-fi
-rm -f core conftest.err conftest.$ac_objext \
-    conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_exotic_fnmatch" >&5
-$as_echo "$ac_cv_lib_exotic_fnmatch" >&6; }
-if test "x$ac_cv_lib_exotic_fnmatch" = x""yes; then :
-  _efl_have_fnmatch="yes"
-else
-  _efl_have_fnmatch="no"
-fi
-
-
-   if test "x${_efl_have_fnmatch}" = "xyes"; then
-      EFL_FNMATCH_LIBS="exotic"
-   fi
-fi
-
-
-
-if test "x$_efl_have_fnmatch" = "xyes"; then :
-
-else
-  as_fn_error $? "Cannot find fnmatch()" "$LINENO" 5
-fi
-
-
-
-
-
-
-ac_config_files="$ac_config_files Makefile eet.pc doc/Makefile doc/Doxyfile doc/eet.dox src/Makefile src/lib/Makefile src/bin/Makefile src/tests/Makefile src/examples/Makefile eet.spec"
-
-cat >confcache <<\_ACEOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs, see configure's option --config-cache.
-# It is not useful on other systems.  If it contains results you don't
-# want to keep, you may remove or edit it.
-#
-# config.status only pays attention to the cache file if you give it
-# the --recheck option to rerun configure.
-#
-# `ac_cv_env_foo' variables (set or unset) will be overridden when
-# loading this file, other *unset* `ac_cv_foo' will be assigned the
-# following values.
-
-_ACEOF
-
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, we kill variables containing newlines.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-(
-  for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do
-    eval ac_val=\$$ac_var
-    case $ac_val in #(
-    *${as_nl}*)
-      case $ac_var in #(
-      *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
-$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
-      esac
-      case $ac_var in #(
-      _ | IFS | as_nl) ;; #(
-      BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
-      *) { eval $ac_var=; unset $ac_var;} ;;
-      esac ;;
-    esac
-  done
-
-  (set) 2>&1 |
-    case $as_nl`(ac_space=' '; set) 2>&1` in #(
-    *${as_nl}ac_space=\ *)
-      # `set' does not quote correctly, so add quotes: double-quote
-      # substitution turns \\\\ into \\, and sed turns \\ into \.
-      sed -n \
-        "s/'/'\\\\''/g;
-          s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
-      ;; #(
-    *)
-      # `set' quotes correctly as required by POSIX, so do not add quotes.
-      sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
-      ;;
-    esac |
-    sort
-) |
-  sed '
-     /^ac_cv_env_/b end
-     t clear
-     :clear
-     s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
-     t end
-     s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
-     :end' >>confcache
-if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
-  if test -w "$cache_file"; then
-    test "x$cache_file" != "x/dev/null" &&
-      { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5
-$as_echo "$as_me: updating cache $cache_file" >&6;}
-    cat confcache >$cache_file
-  else
-    { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5
-$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;}
-  fi
-fi
-rm -f confcache
-
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-# Let make expand exec_prefix.
-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
-DEFS=-DHAVE_CONFIG_H
-
-ac_libobjs=
-ac_ltlibobjs=
-U=
-for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
-  # 1. Remove the extension, and $U if already installed.
-  ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
-  ac_i=`$as_echo "$ac_i" | sed "$ac_script"`
-  # 2. Prepend LIBOBJDIR.  When used with automake>=1.10 LIBOBJDIR
-  #    will be set to the directory where LIBOBJS objects are built.
-  as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext"
-  as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo'
-done
-LIBOBJS=$ac_libobjs
-
-LTLIBOBJS=$ac_ltlibobjs
-
-
- if test -n "$EXEEXT"; then
-  am__EXEEXT_TRUE=
-  am__EXEEXT_FALSE='#'
-else
-  am__EXEEXT_TRUE='#'
-  am__EXEEXT_FALSE=
-fi
-
-if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then
-  as_fn_error $? "conditional \"AMDEP\" was never defined.
-Usually this means the macro was only invoked conditionally." "$LINENO" 5
-fi
-if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then
-  as_fn_error $? "conditional \"am__fastdepCC\" was never defined.
-Usually this means the macro was only invoked conditionally." "$LINENO" 5
-fi
-if test -z "${EET_AMALGAMATION_TRUE}" && test -z "${EET_AMALGAMATION_FALSE}"; then
-  as_fn_error $? "conditional \"EET_AMALGAMATION\" was never defined.
-Usually this means the macro was only invoked conditionally." "$LINENO" 5
-fi
-if test -z "${BUILD_EET_TRUE}" && test -z "${BUILD_EET_FALSE}"; then
-  as_fn_error $? "conditional \"BUILD_EET\" was never defined.
-Usually this means the macro was only invoked conditionally." "$LINENO" 5
-fi
-if test -z "${INSTALL_EXAMPLES_TRUE}" && test -z "${INSTALL_EXAMPLES_FALSE}"; then
-  as_fn_error $? "conditional \"INSTALL_EXAMPLES\" was never defined.
-Usually this means the macro was only invoked conditionally." "$LINENO" 5
-fi
-if test -z "${BUILD_EXAMPLES_TRUE}" && test -z "${BUILD_EXAMPLES_FALSE}"; then
-  as_fn_error $? "conditional \"BUILD_EXAMPLES\" was never defined.
-Usually this means the macro was only invoked conditionally." "$LINENO" 5
-fi
-if test -z "${EFL_ENABLE_TESTS_TRUE}" && test -z "${EFL_ENABLE_TESTS_FALSE}"; then
-  as_fn_error $? "conditional \"EFL_ENABLE_TESTS\" was never defined.
-Usually this means the macro was only invoked conditionally." "$LINENO" 5
-fi
-if test -z "${EFL_ENABLE_COVERAGE_TRUE}" && test -z "${EFL_ENABLE_COVERAGE_FALSE}"; then
-  as_fn_error $? "conditional \"EFL_ENABLE_COVERAGE\" was never defined.
-Usually this means the macro was only invoked conditionally." "$LINENO" 5
-fi
-if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then
-  as_fn_error $? "conditional \"am__fastdepCC\" was never defined.
-Usually this means the macro was only invoked conditionally." "$LINENO" 5
-fi
-if test -z "${EFL_BUILD_DOC_TRUE}" && test -z "${EFL_BUILD_DOC_FALSE}"; then
-  as_fn_error $? "conditional \"EFL_BUILD_DOC\" was never defined.
-Usually this means the macro was only invoked conditionally." "$LINENO" 5
-fi
-
-: ${CONFIG_STATUS=./config.status}
-ac_write_fail=0
-ac_clean_files_save=$ac_clean_files
-ac_clean_files="$ac_clean_files $CONFIG_STATUS"
-{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5
-$as_echo "$as_me: creating $CONFIG_STATUS" >&6;}
-as_write_fail=0
-cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1
-#! $SHELL
-# Generated by $as_me.
-# Run this file to recreate the current configuration.
-# Compiler output produced by configure, useful for debugging
-# configure, is in config.log if it exists.
-
-debug=false
-ac_cs_recheck=false
-ac_cs_silent=false
-
-SHELL=\${CONFIG_SHELL-$SHELL}
-export SHELL
-_ASEOF
-cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1
-## -------------------- ##
-## M4sh Initialization. ##
-## -------------------- ##
-
-# Be more Bourne compatible
-DUALCASE=1; export DUALCASE # for MKS sh
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
-  emulate sh
-  NULLCMD=:
-  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
-  # is contrary to our usage.  Disable this feature.
-  alias -g '${1+"$@"}'='"$@"'
-  setopt NO_GLOB_SUBST
-else
-  case `(set -o) 2>/dev/null` in #(
-  *posix*) :
-    set -o posix ;; #(
-  *) :
-     ;;
-esac
-fi
-
-
-as_nl='
-'
-export as_nl
-# Printing a long string crashes Solaris 7 /usr/bin/printf.
-as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
-as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
-as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
-# Prefer a ksh shell builtin over an external printf program on Solaris,
-# but without wasting forks for bash or zsh.
-if test -z "$BASH_VERSION$ZSH_VERSION" \
-    && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
-  as_echo='print -r --'
-  as_echo_n='print -rn --'
-elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
-  as_echo='printf %s\n'
-  as_echo_n='printf %s'
-else
-  if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
-    as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
-    as_echo_n='/usr/ucb/echo -n'
-  else
-    as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
-    as_echo_n_body='eval
-      arg=$1;
-      case $arg in #(
-      *"$as_nl"*)
-        expr "X$arg" : "X\\(.*\\)$as_nl";
-        arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
-      esac;
-      expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
-    '
-    export as_echo_n_body
-    as_echo_n='sh -c $as_echo_n_body as_echo'
-  fi
-  export as_echo_body
-  as_echo='sh -c $as_echo_body as_echo'
-fi
-
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
-  PATH_SEPARATOR=:
-  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
-    (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
-      PATH_SEPARATOR=';'
-  }
-fi
-
-
-# IFS
-# We need space, tab and new line, in precisely that order.  Quoting is
-# there to prevent editors from complaining about space-tab.
-# (If _AS_PATH_WALK were called with IFS unset, it would disable word
-# splitting by setting IFS to empty value.)
-IFS=" ""        $as_nl"
-
-# Find who we are.  Look in the path if we contain no directory separator.
-case $0 in #((
-  *[\\/]* ) as_myself=$0 ;;
-  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-  done
-IFS=$as_save_IFS
-
-     ;;
-esac
-# We did not find ourselves, most probably we were run as `sh COMMAND'
-# in which case we are not to be found in the path.
-if test "x$as_myself" = x; then
-  as_myself=$0
-fi
-if test ! -f "$as_myself"; then
-  $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
-  exit 1
-fi
-
-# Unset variables that we do not need and which cause bugs (e.g. in
-# pre-3.0 UWIN ksh).  But do not cause bugs in bash 2.01; the "|| exit 1"
-# suppresses any "Segmentation fault" message there.  '((' could
-# trigger a bug in pdksh 5.2.14.
-for as_var in BASH_ENV ENV MAIL MAILPATH
-do eval test x\${$as_var+set} = xset \
-  && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
-done
-PS1='$ '
-PS2='> '
-PS4='+ '
-
-# NLS nuisances.
-LC_ALL=C
-export LC_ALL
-LANGUAGE=C
-export LANGUAGE
-
-# CDPATH.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-
-
-# as_fn_error STATUS ERROR [LINENO LOG_FD]
-# ----------------------------------------
-# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
-# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
-# script with STATUS, using 1 if that was 0.
-as_fn_error ()
-{
-  as_status=$1; test $as_status -eq 0 && as_status=1
-  if test "$4"; then
-    as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
-    $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
-  fi
-  $as_echo "$as_me: error: $2" >&2
-  as_fn_exit $as_status
-} # as_fn_error
-
-
-# as_fn_set_status STATUS
-# -----------------------
-# Set $? to STATUS, without forking.
-as_fn_set_status ()
-{
-  return $1
-} # as_fn_set_status
-
-# as_fn_exit STATUS
-# -----------------
-# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
-as_fn_exit ()
-{
-  set +e
-  as_fn_set_status $1
-  exit $1
-} # as_fn_exit
-
-# as_fn_unset VAR
-# ---------------
-# Portably unset VAR.
-as_fn_unset ()
-{
-  { eval $1=; unset $1;}
-}
-as_unset=as_fn_unset
-# as_fn_append VAR VALUE
-# ----------------------
-# Append the text in VALUE to the end of the definition contained in VAR. Take
-# advantage of any shell optimizations that allow amortized linear growth over
-# repeated appends, instead of the typical quadratic growth present in naive
-# implementations.
-if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
-  eval 'as_fn_append ()
-  {
-    eval $1+=\$2
-  }'
-else
-  as_fn_append ()
-  {
-    eval $1=\$$1\$2
-  }
-fi # as_fn_append
-
-# as_fn_arith ARG...
-# ------------------
-# Perform arithmetic evaluation on the ARGs, and store the result in the
-# global $as_val. Take advantage of shells that can avoid forks. The arguments
-# must be portable across $(()) and expr.
-if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
-  eval 'as_fn_arith ()
-  {
-    as_val=$(( $* ))
-  }'
-else
-  as_fn_arith ()
-  {
-    as_val=`expr "$@" || test $? -eq 1`
-  }
-fi # as_fn_arith
-
-
-if expr a : '\(a\)' >/dev/null 2>&1 &&
-   test "X`expr 00001 : '.*\(...\)'`" = X001; then
-  as_expr=expr
-else
-  as_expr=false
-fi
-
-if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
-  as_basename=basename
-else
-  as_basename=false
-fi
-
-if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
-  as_dirname=dirname
-else
-  as_dirname=false
-fi
-
-as_me=`$as_basename -- "$0" ||
-$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
-         X"$0" : 'X\(//\)$' \| \
-         X"$0" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X/"$0" |
-    sed '/^.*\/\([^/][^/]*\)\/*$/{
-            s//\1/
-            q
-          }
-          /^X\/\(\/\/\)$/{
-            s//\1/
-            q
-          }
-          /^X\/\(\/\).*/{
-            s//\1/
-            q
-          }
-          s/.*/./; q'`
-
-# Avoid depending upon Character Ranges.
-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-as_cr_digits='0123456789'
-as_cr_alnum=$as_cr_Letters$as_cr_digits
-
-ECHO_C= ECHO_N= ECHO_T=
-case `echo -n x` in #(((((
--n*)
-  case `echo 'xy\c'` in
-  *c*) ECHO_T=' ';;     # ECHO_T is single tab character.
-  xy)  ECHO_C='\c';;
-  *)   echo `echo ksh88 bug on AIX 6.1` > /dev/null
-       ECHO_T=' ';;
-  esac;;
-*)
-  ECHO_N='-n';;
-esac
-
-rm -f conf$$ conf$$.exe conf$$.file
-if test -d conf$$.dir; then
-  rm -f conf$$.dir/conf$$.file
-else
-  rm -f conf$$.dir
-  mkdir conf$$.dir 2>/dev/null
-fi
-if (echo >conf$$.file) 2>/dev/null; then
-  if ln -s conf$$.file conf$$ 2>/dev/null; then
-    as_ln_s='ln -s'
-    # ... but there are two gotchas:
-    # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
-    # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
-    # In both cases, we have to default to `cp -p'.
-    ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
-      as_ln_s='cp -p'
-  elif ln conf$$.file conf$$ 2>/dev/null; then
-    as_ln_s=ln
-  else
-    as_ln_s='cp -p'
-  fi
-else
-  as_ln_s='cp -p'
-fi
-rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
-rmdir conf$$.dir 2>/dev/null
-
-
-# as_fn_mkdir_p
-# -------------
-# Create "$as_dir" as a directory, including parents if necessary.
-as_fn_mkdir_p ()
-{
-
-  case $as_dir in #(
-  -*) as_dir=./$as_dir;;
-  esac
-  test -d "$as_dir" || eval $as_mkdir_p || {
-    as_dirs=
-    while :; do
-      case $as_dir in #(
-      *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
-      *) as_qdir=$as_dir;;
-      esac
-      as_dirs="'$as_qdir' $as_dirs"
-      as_dir=`$as_dirname -- "$as_dir" ||
-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-         X"$as_dir" : 'X\(//\)[^/]' \| \
-         X"$as_dir" : 'X\(//\)$' \| \
-         X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X"$as_dir" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-            s//\1/
-            q
-          }
-          /^X\(\/\/\)[^/].*/{
-            s//\1/
-            q
-          }
-          /^X\(\/\/\)$/{
-            s//\1/
-            q
-          }
-          /^X\(\/\).*/{
-            s//\1/
-            q
-          }
-          s/.*/./; q'`
-      test -d "$as_dir" && break
-    done
-    test -z "$as_dirs" || eval "mkdir $as_dirs"
-  } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
-
-
-} # as_fn_mkdir_p
-if mkdir -p . 2>/dev/null; then
-  as_mkdir_p='mkdir -p "$as_dir"'
-else
-  test -d ./-p && rmdir ./-p
-  as_mkdir_p=false
-fi
-
-if test -x / >/dev/null 2>&1; then
-  as_test_x='test -x'
-else
-  if ls -dL / >/dev/null 2>&1; then
-    as_ls_L_option=L
-  else
-    as_ls_L_option=
-  fi
-  as_test_x='
-    eval sh -c '\''
-      if test -d "$1"; then
-        test -d "$1/.";
-      else
-        case $1 in #(
-        -*)set "./$1";;
-        esac;
-        case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((
-        ???[sx]*):;;*)false;;esac;fi
-    '\'' sh
-  '
-fi
-as_executable_p=$as_test_x
-
-# Sed expression to map a string onto a valid CPP name.
-as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
-
-# Sed expression to map a string onto a valid variable name.
-as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
-
-
-exec 6>&1
-## ----------------------------------- ##
-## Main body of $CONFIG_STATUS script. ##
-## ----------------------------------- ##
-_ASEOF
-test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1
-
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-# Save the log message, to keep $0 and so on meaningful, and to
-# report actual input values of CONFIG_FILES etc. instead of their
-# values after options handling.
-ac_log="
-This file was extended by eet $as_me 1.6.0-alpha, which was
-generated by GNU Autoconf 2.67.  Invocation command line was
-
-  CONFIG_FILES    = $CONFIG_FILES
-  CONFIG_HEADERS  = $CONFIG_HEADERS
-  CONFIG_LINKS    = $CONFIG_LINKS
-  CONFIG_COMMANDS = $CONFIG_COMMANDS
-  $ $0 $@
-
-on `(hostname || uname -n) 2>/dev/null | sed 1q`
-"
-
-_ACEOF
-
-case $ac_config_files in *"
-"*) set x $ac_config_files; shift; ac_config_files=$*;;
-esac
-
-case $ac_config_headers in *"
-"*) set x $ac_config_headers; shift; ac_config_headers=$*;;
-esac
-
-
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-# Files that config.status was made for.
-config_files="$ac_config_files"
-config_headers="$ac_config_headers"
-config_commands="$ac_config_commands"
-
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-ac_cs_usage="\
-\`$as_me' instantiates files and other configuration actions
-from templates according to the current configuration.  Unless the files
-and actions are specified as TAGs, all are instantiated by default.
-
-Usage: $0 [OPTION]... [TAG]...
-
-  -h, --help       print this help, then exit
-  -V, --version    print version number and configuration settings, then exit
-      --config     print configuration, then exit
-  -q, --quiet, --silent
-                   do not print progress messages
-  -d, --debug      don't remove temporary files
-      --recheck    update $as_me by reconfiguring in the same conditions
-      --file=FILE[:TEMPLATE]
-                   instantiate the configuration file FILE
-      --header=FILE[:TEMPLATE]
-                   instantiate the configuration header FILE
-
-Configuration files:
-$config_files
-
-Configuration headers:
-$config_headers
-
-Configuration commands:
-$config_commands
-
-Report bugs to <enlightenment-devel@lists.sourceforge.net>."
-
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
-ac_cs_version="\\
-eet config.status 1.6.0-alpha
-configured by $0, generated by GNU Autoconf 2.67,
-  with options \\"\$ac_cs_config\\"
-
-Copyright (C) 2010 Free Software Foundation, Inc.
-This config.status script is free software; the Free Software Foundation
-gives unlimited permission to copy, distribute and modify it."
-
-ac_pwd='$ac_pwd'
-srcdir='$srcdir'
-INSTALL='$INSTALL'
-MKDIR_P='$MKDIR_P'
-AWK='$AWK'
-test -n "\$AWK" || AWK=awk
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-# The default lists apply if the user does not specify any file.
-ac_need_defaults=:
-while test $# != 0
-do
-  case $1 in
-  --*=?*)
-    ac_option=`expr "X$1" : 'X\([^=]*\)='`
-    ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
-    ac_shift=:
-    ;;
-  --*=)
-    ac_option=`expr "X$1" : 'X\([^=]*\)='`
-    ac_optarg=
-    ac_shift=:
-    ;;
-  *)
-    ac_option=$1
-    ac_optarg=$2
-    ac_shift=shift
-    ;;
-  esac
-
-  case $ac_option in
-  # Handling of the options.
-  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
-    ac_cs_recheck=: ;;
-  --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
-    $as_echo "$ac_cs_version"; exit ;;
-  --config | --confi | --conf | --con | --co | --c )
-    $as_echo "$ac_cs_config"; exit ;;
-  --debug | --debu | --deb | --de | --d | -d )
-    debug=: ;;
-  --file | --fil | --fi | --f )
-    $ac_shift
-    case $ac_optarg in
-    *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
-    '') as_fn_error $? "missing file argument" ;;
-    esac
-    as_fn_append CONFIG_FILES " '$ac_optarg'"
-    ac_need_defaults=false;;
-  --header | --heade | --head | --hea )
-    $ac_shift
-    case $ac_optarg in
-    *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
-    esac
-    as_fn_append CONFIG_HEADERS " '$ac_optarg'"
-    ac_need_defaults=false;;
-  --he | --h)
-    # Conflict between --help and --header
-    as_fn_error $? "ambiguous option: \`$1'
-Try \`$0 --help' for more information.";;
-  --help | --hel | -h )
-    $as_echo "$ac_cs_usage"; exit ;;
-  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-  | -silent | --silent | --silen | --sile | --sil | --si | --s)
-    ac_cs_silent=: ;;
-
-  # This is an error.
-  -*) as_fn_error $? "unrecognized option: \`$1'
-Try \`$0 --help' for more information." ;;
-
-  *) as_fn_append ac_config_targets " $1"
-     ac_need_defaults=false ;;
-
-  esac
-  shift
-done
-
-ac_configure_extra_args=
-
-if $ac_cs_silent; then
-  exec 6>/dev/null
-  ac_configure_extra_args="$ac_configure_extra_args --silent"
-fi
-
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-if \$ac_cs_recheck; then
-  set X '$SHELL' '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
-  shift
-  \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6
-  CONFIG_SHELL='$SHELL'
-  export CONFIG_SHELL
-  exec "\$@"
-fi
-
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-exec 5>>config.log
-{
-  echo
-  sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
-## Running $as_me. ##
-_ASBOX
-  $as_echo "$ac_log"
-} >&5
-
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-#
-# INIT-COMMANDS
-#
-AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"
-
-
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-
-sed_quote_subst='$sed_quote_subst'
-double_quote_subst='$double_quote_subst'
-delay_variable_subst='$delay_variable_subst'
-AS='`$ECHO "X$AS" | $Xsed -e "$delay_single_quote_subst"`'
-DLLTOOL='`$ECHO "X$DLLTOOL" | $Xsed -e "$delay_single_quote_subst"`'
-OBJDUMP='`$ECHO "X$OBJDUMP" | $Xsed -e "$delay_single_quote_subst"`'
-macro_version='`$ECHO "X$macro_version" | $Xsed -e "$delay_single_quote_subst"`'
-macro_revision='`$ECHO "X$macro_revision" | $Xsed -e "$delay_single_quote_subst"`'
-enable_shared='`$ECHO "X$enable_shared" | $Xsed -e "$delay_single_quote_subst"`'
-enable_static='`$ECHO "X$enable_static" | $Xsed -e "$delay_single_quote_subst"`'
-pic_mode='`$ECHO "X$pic_mode" | $Xsed -e "$delay_single_quote_subst"`'
-enable_fast_install='`$ECHO "X$enable_fast_install" | $Xsed -e "$delay_single_quote_subst"`'
-host_alias='`$ECHO "X$host_alias" | $Xsed -e "$delay_single_quote_subst"`'
-host='`$ECHO "X$host" | $Xsed -e "$delay_single_quote_subst"`'
-host_os='`$ECHO "X$host_os" | $Xsed -e "$delay_single_quote_subst"`'
-build_alias='`$ECHO "X$build_alias" | $Xsed -e "$delay_single_quote_subst"`'
-build='`$ECHO "X$build" | $Xsed -e "$delay_single_quote_subst"`'
-build_os='`$ECHO "X$build_os" | $Xsed -e "$delay_single_quote_subst"`'
-SED='`$ECHO "X$SED" | $Xsed -e "$delay_single_quote_subst"`'
-Xsed='`$ECHO "X$Xsed" | $Xsed -e "$delay_single_quote_subst"`'
-GREP='`$ECHO "X$GREP" | $Xsed -e "$delay_single_quote_subst"`'
-EGREP='`$ECHO "X$EGREP" | $Xsed -e "$delay_single_quote_subst"`'
-FGREP='`$ECHO "X$FGREP" | $Xsed -e "$delay_single_quote_subst"`'
-LD='`$ECHO "X$LD" | $Xsed -e "$delay_single_quote_subst"`'
-NM='`$ECHO "X$NM" | $Xsed -e "$delay_single_quote_subst"`'
-LN_S='`$ECHO "X$LN_S" | $Xsed -e "$delay_single_quote_subst"`'
-max_cmd_len='`$ECHO "X$max_cmd_len" | $Xsed -e "$delay_single_quote_subst"`'
-ac_objext='`$ECHO "X$ac_objext" | $Xsed -e "$delay_single_quote_subst"`'
-exeext='`$ECHO "X$exeext" | $Xsed -e "$delay_single_quote_subst"`'
-lt_unset='`$ECHO "X$lt_unset" | $Xsed -e "$delay_single_quote_subst"`'
-lt_SP2NL='`$ECHO "X$lt_SP2NL" | $Xsed -e "$delay_single_quote_subst"`'
-lt_NL2SP='`$ECHO "X$lt_NL2SP" | $Xsed -e "$delay_single_quote_subst"`'
-reload_flag='`$ECHO "X$reload_flag" | $Xsed -e "$delay_single_quote_subst"`'
-reload_cmds='`$ECHO "X$reload_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-deplibs_check_method='`$ECHO "X$deplibs_check_method" | $Xsed -e "$delay_single_quote_subst"`'
-file_magic_cmd='`$ECHO "X$file_magic_cmd" | $Xsed -e "$delay_single_quote_subst"`'
-AR='`$ECHO "X$AR" | $Xsed -e "$delay_single_quote_subst"`'
-AR_FLAGS='`$ECHO "X$AR_FLAGS" | $Xsed -e "$delay_single_quote_subst"`'
-STRIP='`$ECHO "X$STRIP" | $Xsed -e "$delay_single_quote_subst"`'
-RANLIB='`$ECHO "X$RANLIB" | $Xsed -e "$delay_single_quote_subst"`'
-old_postinstall_cmds='`$ECHO "X$old_postinstall_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-old_postuninstall_cmds='`$ECHO "X$old_postuninstall_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-old_archive_cmds='`$ECHO "X$old_archive_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-CC='`$ECHO "X$CC" | $Xsed -e "$delay_single_quote_subst"`'
-CFLAGS='`$ECHO "X$CFLAGS" | $Xsed -e "$delay_single_quote_subst"`'
-compiler='`$ECHO "X$compiler" | $Xsed -e "$delay_single_quote_subst"`'
-GCC='`$ECHO "X$GCC" | $Xsed -e "$delay_single_quote_subst"`'
-lt_cv_sys_global_symbol_pipe='`$ECHO "X$lt_cv_sys_global_symbol_pipe" | $Xsed -e "$delay_single_quote_subst"`'
-lt_cv_sys_global_symbol_to_cdecl='`$ECHO "X$lt_cv_sys_global_symbol_to_cdecl" | $Xsed -e "$delay_single_quote_subst"`'
-lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "X$lt_cv_sys_global_symbol_to_c_name_address" | $Xsed -e "$delay_single_quote_subst"`'
-lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "X$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $Xsed -e "$delay_single_quote_subst"`'
-objdir='`$ECHO "X$objdir" | $Xsed -e "$delay_single_quote_subst"`'
-SHELL='`$ECHO "X$SHELL" | $Xsed -e "$delay_single_quote_subst"`'
-ECHO='`$ECHO "X$ECHO" | $Xsed -e "$delay_single_quote_subst"`'
-MAGIC_CMD='`$ECHO "X$MAGIC_CMD" | $Xsed -e "$delay_single_quote_subst"`'
-lt_prog_compiler_no_builtin_flag='`$ECHO "X$lt_prog_compiler_no_builtin_flag" | $Xsed -e "$delay_single_quote_subst"`'
-lt_prog_compiler_wl='`$ECHO "X$lt_prog_compiler_wl" | $Xsed -e "$delay_single_quote_subst"`'
-lt_prog_compiler_pic='`$ECHO "X$lt_prog_compiler_pic" | $Xsed -e "$delay_single_quote_subst"`'
-lt_prog_compiler_static='`$ECHO "X$lt_prog_compiler_static" | $Xsed -e "$delay_single_quote_subst"`'
-lt_cv_prog_compiler_c_o='`$ECHO "X$lt_cv_prog_compiler_c_o" | $Xsed -e "$delay_single_quote_subst"`'
-need_locks='`$ECHO "X$need_locks" | $Xsed -e "$delay_single_quote_subst"`'
-DSYMUTIL='`$ECHO "X$DSYMUTIL" | $Xsed -e "$delay_single_quote_subst"`'
-NMEDIT='`$ECHO "X$NMEDIT" | $Xsed -e "$delay_single_quote_subst"`'
-LIPO='`$ECHO "X$LIPO" | $Xsed -e "$delay_single_quote_subst"`'
-OTOOL='`$ECHO "X$OTOOL" | $Xsed -e "$delay_single_quote_subst"`'
-OTOOL64='`$ECHO "X$OTOOL64" | $Xsed -e "$delay_single_quote_subst"`'
-libext='`$ECHO "X$libext" | $Xsed -e "$delay_single_quote_subst"`'
-shrext_cmds='`$ECHO "X$shrext_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-extract_expsyms_cmds='`$ECHO "X$extract_expsyms_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-archive_cmds_need_lc='`$ECHO "X$archive_cmds_need_lc" | $Xsed -e "$delay_single_quote_subst"`'
-enable_shared_with_static_runtimes='`$ECHO "X$enable_shared_with_static_runtimes" | $Xsed -e "$delay_single_quote_subst"`'
-export_dynamic_flag_spec='`$ECHO "X$export_dynamic_flag_spec" | $Xsed -e "$delay_single_quote_subst"`'
-whole_archive_flag_spec='`$ECHO "X$whole_archive_flag_spec" | $Xsed -e "$delay_single_quote_subst"`'
-compiler_needs_object='`$ECHO "X$compiler_needs_object" | $Xsed -e "$delay_single_quote_subst"`'
-old_archive_from_new_cmds='`$ECHO "X$old_archive_from_new_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-old_archive_from_expsyms_cmds='`$ECHO "X$old_archive_from_expsyms_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-archive_cmds='`$ECHO "X$archive_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-archive_expsym_cmds='`$ECHO "X$archive_expsym_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-module_cmds='`$ECHO "X$module_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-module_expsym_cmds='`$ECHO "X$module_expsym_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-with_gnu_ld='`$ECHO "X$with_gnu_ld" | $Xsed -e "$delay_single_quote_subst"`'
-allow_undefined_flag='`$ECHO "X$allow_undefined_flag" | $Xsed -e "$delay_single_quote_subst"`'
-no_undefined_flag='`$ECHO "X$no_undefined_flag" | $Xsed -e "$delay_single_quote_subst"`'
-hardcode_libdir_flag_spec='`$ECHO "X$hardcode_libdir_flag_spec" | $Xsed -e "$delay_single_quote_subst"`'
-hardcode_libdir_flag_spec_ld='`$ECHO "X$hardcode_libdir_flag_spec_ld" | $Xsed -e "$delay_single_quote_subst"`'
-hardcode_libdir_separator='`$ECHO "X$hardcode_libdir_separator" | $Xsed -e "$delay_single_quote_subst"`'
-hardcode_direct='`$ECHO "X$hardcode_direct" | $Xsed -e "$delay_single_quote_subst"`'
-hardcode_direct_absolute='`$ECHO "X$hardcode_direct_absolute" | $Xsed -e "$delay_single_quote_subst"`'
-hardcode_minus_L='`$ECHO "X$hardcode_minus_L" | $Xsed -e "$delay_single_quote_subst"`'
-hardcode_shlibpath_var='`$ECHO "X$hardcode_shlibpath_var" | $Xsed -e "$delay_single_quote_subst"`'
-hardcode_automatic='`$ECHO "X$hardcode_automatic" | $Xsed -e "$delay_single_quote_subst"`'
-inherit_rpath='`$ECHO "X$inherit_rpath" | $Xsed -e "$delay_single_quote_subst"`'
-link_all_deplibs='`$ECHO "X$link_all_deplibs" | $Xsed -e "$delay_single_quote_subst"`'
-fix_srcfile_path='`$ECHO "X$fix_srcfile_path" | $Xsed -e "$delay_single_quote_subst"`'
-always_export_symbols='`$ECHO "X$always_export_symbols" | $Xsed -e "$delay_single_quote_subst"`'
-export_symbols_cmds='`$ECHO "X$export_symbols_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-exclude_expsyms='`$ECHO "X$exclude_expsyms" | $Xsed -e "$delay_single_quote_subst"`'
-include_expsyms='`$ECHO "X$include_expsyms" | $Xsed -e "$delay_single_quote_subst"`'
-prelink_cmds='`$ECHO "X$prelink_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-file_list_spec='`$ECHO "X$file_list_spec" | $Xsed -e "$delay_single_quote_subst"`'
-variables_saved_for_relink='`$ECHO "X$variables_saved_for_relink" | $Xsed -e "$delay_single_quote_subst"`'
-need_lib_prefix='`$ECHO "X$need_lib_prefix" | $Xsed -e "$delay_single_quote_subst"`'
-need_version='`$ECHO "X$need_version" | $Xsed -e "$delay_single_quote_subst"`'
-version_type='`$ECHO "X$version_type" | $Xsed -e "$delay_single_quote_subst"`'
-runpath_var='`$ECHO "X$runpath_var" | $Xsed -e "$delay_single_quote_subst"`'
-shlibpath_var='`$ECHO "X$shlibpath_var" | $Xsed -e "$delay_single_quote_subst"`'
-shlibpath_overrides_runpath='`$ECHO "X$shlibpath_overrides_runpath" | $Xsed -e "$delay_single_quote_subst"`'
-libname_spec='`$ECHO "X$libname_spec" | $Xsed -e "$delay_single_quote_subst"`'
-library_names_spec='`$ECHO "X$library_names_spec" | $Xsed -e "$delay_single_quote_subst"`'
-soname_spec='`$ECHO "X$soname_spec" | $Xsed -e "$delay_single_quote_subst"`'
-postinstall_cmds='`$ECHO "X$postinstall_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-postuninstall_cmds='`$ECHO "X$postuninstall_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-finish_cmds='`$ECHO "X$finish_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-finish_eval='`$ECHO "X$finish_eval" | $Xsed -e "$delay_single_quote_subst"`'
-hardcode_into_libs='`$ECHO "X$hardcode_into_libs" | $Xsed -e "$delay_single_quote_subst"`'
-sys_lib_search_path_spec='`$ECHO "X$sys_lib_search_path_spec" | $Xsed -e "$delay_single_quote_subst"`'
-sys_lib_dlsearch_path_spec='`$ECHO "X$sys_lib_dlsearch_path_spec" | $Xsed -e "$delay_single_quote_subst"`'
-hardcode_action='`$ECHO "X$hardcode_action" | $Xsed -e "$delay_single_quote_subst"`'
-enable_dlopen='`$ECHO "X$enable_dlopen" | $Xsed -e "$delay_single_quote_subst"`'
-enable_dlopen_self='`$ECHO "X$enable_dlopen_self" | $Xsed -e "$delay_single_quote_subst"`'
-enable_dlopen_self_static='`$ECHO "X$enable_dlopen_self_static" | $Xsed -e "$delay_single_quote_subst"`'
-old_striplib='`$ECHO "X$old_striplib" | $Xsed -e "$delay_single_quote_subst"`'
-striplib='`$ECHO "X$striplib" | $Xsed -e "$delay_single_quote_subst"`'
-
-LTCC='$LTCC'
-LTCFLAGS='$LTCFLAGS'
-compiler='$compiler_DEFAULT'
-
-# Quote evaled strings.
-for var in SED \
-GREP \
-EGREP \
-FGREP \
-LD \
-NM \
-LN_S \
-lt_SP2NL \
-lt_NL2SP \
-reload_flag \
-deplibs_check_method \
-file_magic_cmd \
-AR \
-AR_FLAGS \
-STRIP \
-RANLIB \
-CC \
-CFLAGS \
-compiler \
-lt_cv_sys_global_symbol_pipe \
-lt_cv_sys_global_symbol_to_cdecl \
-lt_cv_sys_global_symbol_to_c_name_address \
-lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \
-SHELL \
-ECHO \
-lt_prog_compiler_no_builtin_flag \
-lt_prog_compiler_wl \
-lt_prog_compiler_pic \
-lt_prog_compiler_static \
-lt_cv_prog_compiler_c_o \
-need_locks \
-DSYMUTIL \
-NMEDIT \
-LIPO \
-OTOOL \
-OTOOL64 \
-shrext_cmds \
-export_dynamic_flag_spec \
-whole_archive_flag_spec \
-compiler_needs_object \
-with_gnu_ld \
-allow_undefined_flag \
-no_undefined_flag \
-hardcode_libdir_flag_spec \
-hardcode_libdir_flag_spec_ld \
-hardcode_libdir_separator \
-fix_srcfile_path \
-exclude_expsyms \
-include_expsyms \
-file_list_spec \
-variables_saved_for_relink \
-libname_spec \
-library_names_spec \
-soname_spec \
-finish_eval \
-old_striplib \
-striplib; do
-    case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in
-    *[\\\\\\\`\\"\\\$]*)
-      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
-      ;;
-    *)
-      eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
-      ;;
-    esac
-done
-
-# Double-quote double-evaled strings.
-for var in reload_cmds \
-old_postinstall_cmds \
-old_postuninstall_cmds \
-old_archive_cmds \
-extract_expsyms_cmds \
-old_archive_from_new_cmds \
-old_archive_from_expsyms_cmds \
-archive_cmds \
-archive_expsym_cmds \
-module_cmds \
-module_expsym_cmds \
-export_symbols_cmds \
-prelink_cmds \
-postinstall_cmds \
-postuninstall_cmds \
-finish_cmds \
-sys_lib_search_path_spec \
-sys_lib_dlsearch_path_spec; do
-    case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in
-    *[\\\\\\\`\\"\\\$]*)
-      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
-      ;;
-    *)
-      eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
-      ;;
-    esac
-done
-
-# Fix-up fallback echo if it was mangled by the above quoting rules.
-case \$lt_ECHO in
-*'\\\$0 --fallback-echo"')  lt_ECHO=\`\$ECHO "X\$lt_ECHO" | \$Xsed -e 's/\\\\\\\\\\\\\\\$0 --fallback-echo"\$/\$0 --fallback-echo"/'\`
-  ;;
-esac
-
-ac_aux_dir='$ac_aux_dir'
-xsi_shell='$xsi_shell'
-lt_shell_append='$lt_shell_append'
-
-# See if we are running on zsh, and set the options which allow our
-# commands through without removal of \ escapes INIT.
-if test -n "\${ZSH_VERSION+set}" ; then
-   setopt NO_GLOB_SUBST
-fi
-
-
-    PACKAGE='$PACKAGE'
-    VERSION='$VERSION'
-    TIMESTAMP='$TIMESTAMP'
-    RM='$RM'
-    ofile='$ofile'
-
-
-
-
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-
-# Handling of arguments.
-for ac_config_target in $ac_config_targets
-do
-  case $ac_config_target in
-    "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;;
-    "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
-    "libtool") CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;;
-    "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
-    "eet.pc") CONFIG_FILES="$CONFIG_FILES eet.pc" ;;
-    "doc/Makefile") CONFIG_FILES="$CONFIG_FILES doc/Makefile" ;;
-    "doc/Doxyfile") CONFIG_FILES="$CONFIG_FILES doc/Doxyfile" ;;
-    "doc/eet.dox") CONFIG_FILES="$CONFIG_FILES doc/eet.dox" ;;
-    "src/Makefile") CONFIG_FILES="$CONFIG_FILES src/Makefile" ;;
-    "src/lib/Makefile") CONFIG_FILES="$CONFIG_FILES src/lib/Makefile" ;;
-    "src/bin/Makefile") CONFIG_FILES="$CONFIG_FILES src/bin/Makefile" ;;
-    "src/tests/Makefile") CONFIG_FILES="$CONFIG_FILES src/tests/Makefile" ;;
-    "src/examples/Makefile") CONFIG_FILES="$CONFIG_FILES src/examples/Makefile" ;;
-    "eet.spec") CONFIG_FILES="$CONFIG_FILES eet.spec" ;;
-
-  *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5 ;;
-  esac
-done
-
-
-# If the user did not use the arguments to specify the items to instantiate,
-# then the envvar interface is used.  Set only those that are not.
-# We use the long form for the default assignment because of an extremely
-# bizarre bug on SunOS 4.1.3.
-if $ac_need_defaults; then
-  test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
-  test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers
-  test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands
-fi
-
-# Have a temporary directory for convenience.  Make it in the build tree
-# simply because there is no reason against having it here, and in addition,
-# creating and moving files from /tmp can sometimes cause problems.
-# Hook for its removal unless debugging.
-# Note that there is a small window in which the directory will not be cleaned:
-# after its creation but before its name has been assigned to `$tmp'.
-$debug ||
-{
-  tmp=
-  trap 'exit_status=$?
-  { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status
-' 0
-  trap 'as_fn_exit 1' 1 2 13 15
-}
-# Create a (secure) tmp directory for tmp files.
-
-{
-  tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
-  test -n "$tmp" && test -d "$tmp"
-}  ||
-{
-  tmp=./conf$$-$RANDOM
-  (umask 077 && mkdir "$tmp")
-} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5
-
-# Set up the scripts for CONFIG_FILES section.
-# No need to generate them if there are no CONFIG_FILES.
-# This happens for instance with `./config.status config.h'.
-if test -n "$CONFIG_FILES"; then
-
-
-ac_cr=`echo X | tr X '\015'`
-# On cygwin, bash can eat \r inside `` if the user requested igncr.
-# But we know of no other shell where ac_cr would be empty at this
-# point, so we can use a bashism as a fallback.
-if test "x$ac_cr" = x; then
-  eval ac_cr=\$\'\\r\'
-fi
-ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null`
-if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then
-  ac_cs_awk_cr='\\r'
-else
-  ac_cs_awk_cr=$ac_cr
-fi
-
-echo 'BEGIN {' >"$tmp/subs1.awk" &&
-_ACEOF
-
-
-{
-  echo "cat >conf$$subs.awk <<_ACEOF" &&
-  echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' &&
-  echo "_ACEOF"
-} >conf$$subs.sh ||
-  as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
-ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'`
-ac_delim='%!_!# '
-for ac_last_try in false false false false false :; do
-  . ./conf$$subs.sh ||
-    as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
-
-  ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X`
-  if test $ac_delim_n = $ac_delim_num; then
-    break
-  elif $ac_last_try; then
-    as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
-  else
-    ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
-  fi
-done
-rm -f conf$$subs.sh
-
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-cat >>"\$tmp/subs1.awk" <<\\_ACAWK &&
-_ACEOF
-sed -n '
-h
-s/^/S["/; s/!.*/"]=/
-p
-g
-s/^[^!]*!//
-:repl
-t repl
-s/'"$ac_delim"'$//
-t delim
-:nl
-h
-s/\(.\{148\}\)..*/\1/
-t more1
-s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/
-p
-n
-b repl
-:more1
-s/["\\]/\\&/g; s/^/"/; s/$/"\\/
-p
-g
-s/.\{148\}//
-t nl
-:delim
-h
-s/\(.\{148\}\)..*/\1/
-t more2
-s/["\\]/\\&/g; s/^/"/; s/$/"/
-p
-b
-:more2
-s/["\\]/\\&/g; s/^/"/; s/$/"\\/
-p
-g
-s/.\{148\}//
-t delim
-' <conf$$subs.awk | sed '
-/^[^""]/{
-  N
-  s/\n//
-}
-' >>$CONFIG_STATUS || ac_write_fail=1
-rm -f conf$$subs.awk
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-_ACAWK
-cat >>"\$tmp/subs1.awk" <<_ACAWK &&
-  for (key in S) S_is_set[key] = 1
-  FS = ""
-
-}
-{
-  line = $ 0
-  nfields = split(line, field, "@")
-  substed = 0
-  len = length(field[1])
-  for (i = 2; i < nfields; i++) {
-    key = field[i]
-    keylen = length(key)
-    if (S_is_set[key]) {
-      value = S[key]
-      line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3)
-      len += length(value) + length(field[++i])
-      substed = 1
-    } else
-      len += 1 + keylen
-  }
-
-  print line
-}
-
-_ACAWK
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then
-  sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g"
-else
-  cat
-fi < "$tmp/subs1.awk" > "$tmp/subs.awk" \
-  || as_fn_error $? "could not setup config files machinery" "$LINENO" 5
-_ACEOF
-
-# VPATH may cause trouble with some makes, so we remove sole $(srcdir),
-# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and
-# trailing colons and then remove the whole line if VPATH becomes empty
-# (actually we leave an empty line to preserve line numbers).
-if test "x$srcdir" = x.; then
-  ac_vpsub='/^[  ]*VPATH[        ]*=[    ]*/{
-h
-s///
-s/^/:/
-s/[      ]*$/:/
-s/:\$(srcdir):/:/g
-s/:\${srcdir}:/:/g
-s/:@srcdir@:/:/g
-s/^:*//
-s/:*$//
-x
-s/\(=[   ]*\).*/\1/
-G
-s/\n//
-s/^[^=]*=[       ]*$//
-}'
-fi
-
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-fi # test -n "$CONFIG_FILES"
-
-# Set up the scripts for CONFIG_HEADERS section.
-# No need to generate them if there are no CONFIG_HEADERS.
-# This happens for instance with `./config.status Makefile'.
-if test -n "$CONFIG_HEADERS"; then
-cat >"$tmp/defines.awk" <<\_ACAWK ||
-BEGIN {
-_ACEOF
-
-# Transform confdefs.h into an awk script `defines.awk', embedded as
-# here-document in config.status, that substitutes the proper values into
-# config.h.in to produce config.h.
-
-# Create a delimiter string that does not exist in confdefs.h, to ease
-# handling of long lines.
-ac_delim='%!_!# '
-for ac_last_try in false false :; do
-  ac_t=`sed -n "/$ac_delim/p" confdefs.h`
-  if test -z "$ac_t"; then
-    break
-  elif $ac_last_try; then
-    as_fn_error $? "could not make $CONFIG_HEADERS" "$LINENO" 5
-  else
-    ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
-  fi
-done
-
-# For the awk script, D is an array of macro values keyed by name,
-# likewise P contains macro parameters if any.  Preserve backslash
-# newline sequences.
-
-ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]*
-sed -n '
-s/.\{148\}/&'"$ac_delim"'/g
-t rset
-:rset
-s/^[     ]*#[    ]*define[       ][      ]*/ /
-t def
-d
-:def
-s/\\$//
-t bsnl
-s/["\\]/\\&/g
-s/^ \('"$ac_word_re"'\)\(([^()]*)\)[     ]*\(.*\)/P["\1"]="\2"\
-D["\1"]=" \3"/p
-s/^ \('"$ac_word_re"'\)[         ]*\(.*\)/D["\1"]=" \2"/p
-d
-:bsnl
-s/["\\]/\\&/g
-s/^ \('"$ac_word_re"'\)\(([^()]*)\)[     ]*\(.*\)/P["\1"]="\2"\
-D["\1"]=" \3\\\\\\n"\\/p
-t cont
-s/^ \('"$ac_word_re"'\)[         ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p
-t cont
-d
-:cont
-n
-s/.\{148\}/&'"$ac_delim"'/g
-t clear
-:clear
-s/\\$//
-t bsnlc
-s/["\\]/\\&/g; s/^/"/; s/$/"/p
-d
-:bsnlc
-s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p
-b cont
-' <confdefs.h | sed '
-s/'"$ac_delim"'/"\\\
-"/g' >>$CONFIG_STATUS || ac_write_fail=1
-
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-  for (key in D) D_is_set[key] = 1
-  FS = ""
-}
-/^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ {
-  line = \$ 0
-  split(line, arg, " ")
-  if (arg[1] == "#") {
-    defundef = arg[2]
-    mac1 = arg[3]
-  } else {
-    defundef = substr(arg[1], 2)
-    mac1 = arg[2]
-  }
-  split(mac1, mac2, "(") #)
-  macro = mac2[1]
-  prefix = substr(line, 1, index(line, defundef) - 1)
-  if (D_is_set[macro]) {
-    # Preserve the white space surrounding the "#".
-    print prefix "define", macro P[macro] D[macro]
-    next
-  } else {
-    # Replace #undef with comments.  This is necessary, for example,
-    # in the case of _POSIX_SOURCE, which is predefined and required
-    # on some systems where configure will not decide to define it.
-    if (defundef == "undef") {
-      print "/*", prefix defundef, macro, "*/"
-      next
-    }
-  }
-}
-{ print }
-_ACAWK
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-  as_fn_error $? "could not setup config headers machinery" "$LINENO" 5
-fi # test -n "$CONFIG_HEADERS"
-
-
-eval set X "  :F $CONFIG_FILES  :H $CONFIG_HEADERS    :C $CONFIG_COMMANDS"
-shift
-for ac_tag
-do
-  case $ac_tag in
-  :[FHLC]) ac_mode=$ac_tag; continue;;
-  esac
-  case $ac_mode$ac_tag in
-  :[FHL]*:*);;
-  :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5 ;;
-  :[FH]-) ac_tag=-:-;;
-  :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
-  esac
-  ac_save_IFS=$IFS
-  IFS=:
-  set x $ac_tag
-  IFS=$ac_save_IFS
-  shift
-  ac_file=$1
-  shift
-
-  case $ac_mode in
-  :L) ac_source=$1;;
-  :[FH])
-    ac_file_inputs=
-    for ac_f
-    do
-      case $ac_f in
-      -) ac_f="$tmp/stdin";;
-      *) # Look for the file first in the build tree, then in the source tree
-         # (if the path is not absolute).  The absolute path cannot be DOS-style,
-         # because $ac_f cannot contain `:'.
-         test -f "$ac_f" ||
-           case $ac_f in
-           [\\/$]*) false;;
-           *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
-           esac ||
-           as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5 ;;
-      esac
-      case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
-      as_fn_append ac_file_inputs " '$ac_f'"
-    done
-
-    # Let's still pretend it is `configure' which instantiates (i.e., don't
-    # use $as_me), people would be surprised to read:
-    #    /* config.h.  Generated by config.status.  */
-    configure_input='Generated from '`
-          $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g'
-        `' by configure.'
-    if test x"$ac_file" != x-; then
-      configure_input="$ac_file.  $configure_input"
-      { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5
-$as_echo "$as_me: creating $ac_file" >&6;}
-    fi
-    # Neutralize special characters interpreted by sed in replacement strings.
-    case $configure_input in #(
-    *\&* | *\|* | *\\* )
-       ac_sed_conf_input=`$as_echo "$configure_input" |
-       sed 's/[\\\\&|]/\\\\&/g'`;; #(
-    *) ac_sed_conf_input=$configure_input;;
-    esac
-
-    case $ac_tag in
-    *:-:* | *:-) cat >"$tmp/stdin" \
-      || as_fn_error $? "could not create $ac_file" "$LINENO" 5  ;;
-    esac
-    ;;
-  esac
-
-  ac_dir=`$as_dirname -- "$ac_file" ||
-$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-         X"$ac_file" : 'X\(//\)[^/]' \| \
-         X"$ac_file" : 'X\(//\)$' \| \
-         X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X"$ac_file" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-            s//\1/
-            q
-          }
-          /^X\(\/\/\)[^/].*/{
-            s//\1/
-            q
-          }
-          /^X\(\/\/\)$/{
-            s//\1/
-            q
-          }
-          /^X\(\/\).*/{
-            s//\1/
-            q
-          }
-          s/.*/./; q'`
-  as_dir="$ac_dir"; as_fn_mkdir_p
-  ac_builddir=.
-
-case "$ac_dir" in
-.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
-*)
-  ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
-  # A ".." for each directory in $ac_dir_suffix.
-  ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
-  case $ac_top_builddir_sub in
-  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
-  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
-  esac ;;
-esac
-ac_abs_top_builddir=$ac_pwd
-ac_abs_builddir=$ac_pwd$ac_dir_suffix
-# for backward compatibility:
-ac_top_builddir=$ac_top_build_prefix
-
-case $srcdir in
-  .)  # We are building in place.
-    ac_srcdir=.
-    ac_top_srcdir=$ac_top_builddir_sub
-    ac_abs_top_srcdir=$ac_pwd ;;
-  [\\/]* | ?:[\\/]* )  # Absolute name.
-    ac_srcdir=$srcdir$ac_dir_suffix;
-    ac_top_srcdir=$srcdir
-    ac_abs_top_srcdir=$srcdir ;;
-  *) # Relative name.
-    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
-    ac_top_srcdir=$ac_top_build_prefix$srcdir
-    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
-esac
-ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
-
-
-  case $ac_mode in
-  :F)
-  #
-  # CONFIG_FILE
-  #
-
-  case $INSTALL in
-  [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
-  *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;;
-  esac
-  ac_MKDIR_P=$MKDIR_P
-  case $MKDIR_P in
-  [\\/$]* | ?:[\\/]* ) ;;
-  */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;;
-  esac
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-# If the template does not know about datarootdir, expand it.
-# FIXME: This hack should be removed a few years after 2.60.
-ac_datarootdir_hack=; ac_datarootdir_seen=
-ac_sed_dataroot='
-/datarootdir/ {
-  p
-  q
-}
-/@datadir@/p
-/@docdir@/p
-/@infodir@/p
-/@localedir@/p
-/@mandir@/p'
-case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in
-*datarootdir*) ac_datarootdir_seen=yes;;
-*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
-  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
-$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-  ac_datarootdir_hack='
-  s&@datadir@&$datadir&g
-  s&@docdir@&$docdir&g
-  s&@infodir@&$infodir&g
-  s&@localedir@&$localedir&g
-  s&@mandir@&$mandir&g
-  s&\\\${datarootdir}&$datarootdir&g' ;;
-esac
-_ACEOF
-
-# Neutralize VPATH when `$srcdir' = `.'.
-# Shell code in configure.ac might set extrasub.
-# FIXME: do we really want to maintain this feature?
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-ac_sed_extra="$ac_vpsub
-$extrasub
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-:t
-/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
-s|@configure_input@|$ac_sed_conf_input|;t t
-s&@top_builddir@&$ac_top_builddir_sub&;t t
-s&@top_build_prefix@&$ac_top_build_prefix&;t t
-s&@srcdir@&$ac_srcdir&;t t
-s&@abs_srcdir@&$ac_abs_srcdir&;t t
-s&@top_srcdir@&$ac_top_srcdir&;t t
-s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t
-s&@builddir@&$ac_builddir&;t t
-s&@abs_builddir@&$ac_abs_builddir&;t t
-s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
-s&@INSTALL@&$ac_INSTALL&;t t
-s&@MKDIR_P@&$ac_MKDIR_P&;t t
-$ac_datarootdir_hack
-"
-eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$tmp/subs.awk" >$tmp/out \
-  || as_fn_error $? "could not create $ac_file" "$LINENO" 5
-
-test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
-  { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } &&
-  { ac_out=`sed -n '/^[  ]*datarootdir[  ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } &&
-  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir'
-which seems to be undefined.  Please make sure it is defined" >&5
-$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
-which seems to be undefined.  Please make sure it is defined" >&2;}
-
-  rm -f "$tmp/stdin"
-  case $ac_file in
-  -) cat "$tmp/out" && rm -f "$tmp/out";;
-  *) rm -f "$ac_file" && mv "$tmp/out" "$ac_file";;
-  esac \
-  || as_fn_error $? "could not create $ac_file" "$LINENO" 5
- ;;
-  :H)
-  #
-  # CONFIG_HEADER
-  #
-  if test x"$ac_file" != x-; then
-    {
-      $as_echo "/* $configure_input  */" \
-      && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs"
-    } >"$tmp/config.h" \
-      || as_fn_error $? "could not create $ac_file" "$LINENO" 5
-    if diff "$ac_file" "$tmp/config.h" >/dev/null 2>&1; then
-      { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5
-$as_echo "$as_me: $ac_file is unchanged" >&6;}
-    else
-      rm -f "$ac_file"
-      mv "$tmp/config.h" "$ac_file" \
-        || as_fn_error $? "could not create $ac_file" "$LINENO" 5
-    fi
-  else
-    $as_echo "/* $configure_input  */" \
-      && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs" \
-      || as_fn_error $? "could not create -" "$LINENO" 5
-  fi
-# Compute "$ac_file"'s index in $config_headers.
-_am_arg="$ac_file"
-_am_stamp_count=1
-for _am_header in $config_headers :; do
-  case $_am_header in
-    $_am_arg | $_am_arg:* )
-      break ;;
-    * )
-      _am_stamp_count=`expr $_am_stamp_count + 1` ;;
-  esac
-done
-echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" ||
-$as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-         X"$_am_arg" : 'X\(//\)[^/]' \| \
-         X"$_am_arg" : 'X\(//\)$' \| \
-         X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X"$_am_arg" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-            s//\1/
-            q
-          }
-          /^X\(\/\/\)[^/].*/{
-            s//\1/
-            q
-          }
-          /^X\(\/\/\)$/{
-            s//\1/
-            q
-          }
-          /^X\(\/\).*/{
-            s//\1/
-            q
-          }
-          s/.*/./; q'`/stamp-h$_am_stamp_count
- ;;
-
-  :C)  { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5
-$as_echo "$as_me: executing $ac_file commands" >&6;}
- ;;
-  esac
-
-
-  case $ac_file$ac_mode in
-    "depfiles":C) test x"$AMDEP_TRUE" != x"" || {
-  # Autoconf 2.62 quotes --file arguments for eval, but not when files
-  # are listed without --file.  Let's play safe and only enable the eval
-  # if we detect the quoting.
-  case $CONFIG_FILES in
-  *\'*) eval set x "$CONFIG_FILES" ;;
-  *)   set x $CONFIG_FILES ;;
-  esac
-  shift
-  for mf
-  do
-    # Strip MF so we end up with the name of the file.
-    mf=`echo "$mf" | sed -e 's/:.*$//'`
-    # Check whether this is an Automake generated Makefile or not.
-    # We used to match only the files named `Makefile.in', but
-    # some people rename them; so instead we look at the file content.
-    # Grep'ing the first line is not enough: some people post-process
-    # each Makefile.in and add a new line on top of each file to say so.
-    # Grep'ing the whole file is not good either: AIX grep has a line
-    # limit of 2048, but all sed's we know have understand at least 4000.
-    if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
-      dirpart=`$as_dirname -- "$mf" ||
-$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-         X"$mf" : 'X\(//\)[^/]' \| \
-         X"$mf" : 'X\(//\)$' \| \
-         X"$mf" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X"$mf" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-            s//\1/
-            q
-          }
-          /^X\(\/\/\)[^/].*/{
-            s//\1/
-            q
-          }
-          /^X\(\/\/\)$/{
-            s//\1/
-            q
-          }
-          /^X\(\/\).*/{
-            s//\1/
-            q
-          }
-          s/.*/./; q'`
-    else
-      continue
-    fi
-    # Extract the definition of DEPDIR, am__include, and am__quote
-    # from the Makefile without running `make'.
-    DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
-    test -z "$DEPDIR" && continue
-    am__include=`sed -n 's/^am__include = //p' < "$mf"`
-    test -z "am__include" && continue
-    am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
-    # When using ansi2knr, U may be empty or an underscore; expand it
-    U=`sed -n 's/^U = //p' < "$mf"`
-    # Find all dependency output files, they are included files with
-    # $(DEPDIR) in their names.  We invoke sed twice because it is the
-    # simplest approach to changing $(DEPDIR) to its actual value in the
-    # expansion.
-    for file in `sed -n "
-      s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
-         sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
-      # Make sure the directory exists.
-      test -f "$dirpart/$file" && continue
-      fdir=`$as_dirname -- "$file" ||
-$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-         X"$file" : 'X\(//\)[^/]' \| \
-         X"$file" : 'X\(//\)$' \| \
-         X"$file" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X"$file" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-            s//\1/
-            q
-          }
-          /^X\(\/\/\)[^/].*/{
-            s//\1/
-            q
-          }
-          /^X\(\/\/\)$/{
-            s//\1/
-            q
-          }
-          /^X\(\/\).*/{
-            s//\1/
-            q
-          }
-          s/.*/./; q'`
-      as_dir=$dirpart/$fdir; as_fn_mkdir_p
-      # echo "creating $dirpart/$file"
-      echo '# dummy' > "$dirpart/$file"
-    done
-  done
-}
- ;;
-    "libtool":C)
-
-    # See if we are running on zsh, and set the options which allow our
-    # commands through without removal of \ escapes.
-    if test -n "${ZSH_VERSION+set}" ; then
-      setopt NO_GLOB_SUBST
-    fi
-
-    cfgfile="${ofile}T"
-    trap "$RM \"$cfgfile\"; exit 1" 1 2 15
-    $RM "$cfgfile"
-
-    cat <<_LT_EOF >> "$cfgfile"
-#! $SHELL
-
-# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
-# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION
-# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-# NOTE: Changes made to this file will be lost: look at ltmain.sh.
-#
-#   Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
-#                 2006, 2007, 2008 Free Software Foundation, Inc.
-#   Written by Gordon Matzigkeit, 1996
-#
-#   This file is part of GNU Libtool.
-#
-# GNU Libtool is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# As a special exception to the GNU General Public License,
-# if you distribute this file as part of a program or library that
-# is built using GNU Libtool, you may include this file under the
-# same distribution terms that you use for the rest of that program.
-#
-# GNU Libtool is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with GNU Libtool; see the file COPYING.  If not, a copy
-# can be downloaded from http://www.gnu.org/licenses/gpl.html, or
-# obtained by writing to the Free Software Foundation, Inc.,
-# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-
-
-# The names of the tagged configurations supported by this script.
-available_tags=""
-
-# ### BEGIN LIBTOOL CONFIG
-
-# Assembler program.
-AS=$AS
-
-# DLL creation program.
-DLLTOOL=$DLLTOOL
-
-# Object dumper program.
-OBJDUMP=$OBJDUMP
-
-# Which release of libtool.m4 was used?
-macro_version=$macro_version
-macro_revision=$macro_revision
-
-# Whether or not to build shared libraries.
-build_libtool_libs=$enable_shared
-
-# Whether or not to build static libraries.
-build_old_libs=$enable_static
-
-# What type of objects to build.
-pic_mode=$pic_mode
-
-# Whether or not to optimize for fast installation.
-fast_install=$enable_fast_install
-
-# The host system.
-host_alias=$host_alias
-host=$host
-host_os=$host_os
-
-# The build system.
-build_alias=$build_alias
-build=$build
-build_os=$build_os
-
-# A sed program that does not truncate output.
-SED=$lt_SED
-
-# Sed that helps us avoid accidentally triggering echo(1) options like -n.
-Xsed="\$SED -e 1s/^X//"
-
-# A grep program that handles long lines.
-GREP=$lt_GREP
-
-# An ERE matcher.
-EGREP=$lt_EGREP
-
-# A literal string matcher.
-FGREP=$lt_FGREP
-
-# A BSD- or MS-compatible name lister.
-NM=$lt_NM
-
-# Whether we need soft or hard links.
-LN_S=$lt_LN_S
-
-# What is the maximum length of a command?
-max_cmd_len=$max_cmd_len
-
-# Object file suffix (normally "o").
-objext=$ac_objext
-
-# Executable file suffix (normally "").
-exeext=$exeext
-
-# whether the shell understands "unset".
-lt_unset=$lt_unset
-
-# turn spaces into newlines.
-SP2NL=$lt_lt_SP2NL
-
-# turn newlines into spaces.
-NL2SP=$lt_lt_NL2SP
-
-# How to create reloadable object files.
-reload_flag=$lt_reload_flag
-reload_cmds=$lt_reload_cmds
-
-# Method to check whether dependent libraries are shared objects.
-deplibs_check_method=$lt_deplibs_check_method
-
-# Command to use when deplibs_check_method == "file_magic".
-file_magic_cmd=$lt_file_magic_cmd
-
-# The archiver.
-AR=$lt_AR
-AR_FLAGS=$lt_AR_FLAGS
-
-# A symbol stripping program.
-STRIP=$lt_STRIP
-
-# Commands used to install an old-style archive.
-RANLIB=$lt_RANLIB
-old_postinstall_cmds=$lt_old_postinstall_cmds
-old_postuninstall_cmds=$lt_old_postuninstall_cmds
-
-# A C compiler.
-LTCC=$lt_CC
-
-# LTCC compiler flags.
-LTCFLAGS=$lt_CFLAGS
-
-# Take the output of nm and produce a listing of raw symbols and C names.
-global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
-
-# Transform the output of nm in a proper C declaration.
-global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
-
-# Transform the output of nm in a C name address pair.
-global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
-
-# Transform the output of nm in a C name address pair when lib prefix is needed.
-global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix
-
-# The name of the directory that contains temporary libtool files.
-objdir=$objdir
-
-# Shell to use when invoking shell scripts.
-SHELL=$lt_SHELL
-
-# An echo program that does not interpret backslashes.
-ECHO=$lt_ECHO
-
-# Used to examine libraries when file_magic_cmd begins with "file".
-MAGIC_CMD=$MAGIC_CMD
-
-# Must we lock files when doing compilation?
-need_locks=$lt_need_locks
-
-# Tool to manipulate archived DWARF debug symbol files on Mac OS X.
-DSYMUTIL=$lt_DSYMUTIL
-
-# Tool to change global to local symbols on Mac OS X.
-NMEDIT=$lt_NMEDIT
-
-# Tool to manipulate fat objects and archives on Mac OS X.
-LIPO=$lt_LIPO
-
-# ldd/readelf like tool for Mach-O binaries on Mac OS X.
-OTOOL=$lt_OTOOL
-
-# ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4.
-OTOOL64=$lt_OTOOL64
-
-# Old archive suffix (normally "a").
-libext=$libext
-
-# Shared library suffix (normally ".so").
-shrext_cmds=$lt_shrext_cmds
-
-# The commands to extract the exported symbol list from a shared archive.
-extract_expsyms_cmds=$lt_extract_expsyms_cmds
-
-# Variables whose values should be saved in libtool wrapper scripts and
-# restored at link time.
-variables_saved_for_relink=$lt_variables_saved_for_relink
-
-# Do we need the "lib" prefix for modules?
-need_lib_prefix=$need_lib_prefix
-
-# Do we need a version for libraries?
-need_version=$need_version
-
-# Library versioning type.
-version_type=$version_type
-
-# Shared library runtime path variable.
-runpath_var=$runpath_var
-
-# Shared library path variable.
-shlibpath_var=$shlibpath_var
-
-# Is shlibpath searched before the hard-coded library search path?
-shlibpath_overrides_runpath=$shlibpath_overrides_runpath
-
-# Format of library name prefix.
-libname_spec=$lt_libname_spec
-
-# List of archive names.  First name is the real one, the rest are links.
-# The last name is the one that the linker finds with -lNAME
-library_names_spec=$lt_library_names_spec
-
-# The coded name of the library, if different from the real name.
-soname_spec=$lt_soname_spec
-
-# Command to use after installation of a shared archive.
-postinstall_cmds=$lt_postinstall_cmds
-
-# Command to use after uninstallation of a shared archive.
-postuninstall_cmds=$lt_postuninstall_cmds
-
-# Commands used to finish a libtool library installation in a directory.
-finish_cmds=$lt_finish_cmds
-
-# As "finish_cmds", except a single script fragment to be evaled but
-# not shown.
-finish_eval=$lt_finish_eval
-
-# Whether we should hardcode library paths into libraries.
-hardcode_into_libs=$hardcode_into_libs
-
-# Compile-time system search path for libraries.
-sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
-
-# Run-time system search path for libraries.
-sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
-
-# Whether dlopen is supported.
-dlopen_support=$enable_dlopen
-
-# Whether dlopen of programs is supported.
-dlopen_self=$enable_dlopen_self
-
-# Whether dlopen of statically linked programs is supported.
-dlopen_self_static=$enable_dlopen_self_static
-
-# Commands to strip libraries.
-old_striplib=$lt_old_striplib
-striplib=$lt_striplib
-
-
-# The linker used to build libraries.
-LD=$lt_LD
-
-# Commands used to build an old-style archive.
-old_archive_cmds=$lt_old_archive_cmds
-
-# A language specific compiler.
-CC=$lt_compiler
-
-# Is the compiler the GNU compiler?
-with_gcc=$GCC
-
-# Compiler flag to turn off builtin functions.
-no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag
-
-# How to pass a linker flag through the compiler.
-wl=$lt_lt_prog_compiler_wl
-
-# Additional compiler flags for building library objects.
-pic_flag=$lt_lt_prog_compiler_pic
-
-# Compiler flag to prevent dynamic linking.
-link_static_flag=$lt_lt_prog_compiler_static
-
-# Does compiler simultaneously support -c and -o options?
-compiler_c_o=$lt_lt_cv_prog_compiler_c_o
-
-# Whether or not to add -lc for building shared libraries.
-build_libtool_need_lc=$archive_cmds_need_lc
-
-# Whether or not to disallow shared libs when runtime libs are static.
-allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes
-
-# Compiler flag to allow reflexive dlopens.
-export_dynamic_flag_spec=$lt_export_dynamic_flag_spec
-
-# Compiler flag to generate shared objects directly from archives.
-whole_archive_flag_spec=$lt_whole_archive_flag_spec
-
-# Whether the compiler copes with passing no objects directly.
-compiler_needs_object=$lt_compiler_needs_object
-
-# Create an old-style archive from a shared archive.
-old_archive_from_new_cmds=$lt_old_archive_from_new_cmds
-
-# Create a temporary old-style archive to link instead of a shared archive.
-old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds
-
-# Commands used to build a shared archive.
-archive_cmds=$lt_archive_cmds
-archive_expsym_cmds=$lt_archive_expsym_cmds
-
-# Commands used to build a loadable module if different from building
-# a shared archive.
-module_cmds=$lt_module_cmds
-module_expsym_cmds=$lt_module_expsym_cmds
-
-# Whether we are building with GNU ld or not.
-with_gnu_ld=$lt_with_gnu_ld
-
-# Flag that allows shared libraries with undefined symbols to be built.
-allow_undefined_flag=$lt_allow_undefined_flag
-
-# Flag that enforces no undefined symbols.
-no_undefined_flag=$lt_no_undefined_flag
-
-# Flag to hardcode \$libdir into a binary during linking.
-# This must work even if \$libdir does not exist
-hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec
-
-# If ld is used when linking, flag to hardcode \$libdir into a binary
-# during linking.  This must work even if \$libdir does not exist.
-hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld
-
-# Whether we need a single "-rpath" flag with a separated argument.
-hardcode_libdir_separator=$lt_hardcode_libdir_separator
-
-# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
-# DIR into the resulting binary.
-hardcode_direct=$hardcode_direct
-
-# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
-# DIR into the resulting binary and the resulting library dependency is
-# "absolute",i.e impossible to change by setting \${shlibpath_var} if the
-# library is relocated.
-hardcode_direct_absolute=$hardcode_direct_absolute
-
-# Set to "yes" if using the -LDIR flag during linking hardcodes DIR
-# into the resulting binary.
-hardcode_minus_L=$hardcode_minus_L
-
-# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
-# into the resulting binary.
-hardcode_shlibpath_var=$hardcode_shlibpath_var
-
-# Set to "yes" if building a shared library automatically hardcodes DIR
-# into the library and all subsequent libraries and executables linked
-# against it.
-hardcode_automatic=$hardcode_automatic
-
-# Set to yes if linker adds runtime paths of dependent libraries
-# to runtime path list.
-inherit_rpath=$inherit_rpath
-
-# Whether libtool must link a program against all its dependency libraries.
-link_all_deplibs=$link_all_deplibs
-
-# Fix the shell variable \$srcfile for the compiler.
-fix_srcfile_path=$lt_fix_srcfile_path
-
-# Set to "yes" if exported symbols are required.
-always_export_symbols=$always_export_symbols
-
-# The commands to list exported symbols.
-export_symbols_cmds=$lt_export_symbols_cmds
-
-# Symbols that should not be listed in the preloaded symbols.
-exclude_expsyms=$lt_exclude_expsyms
-
-# Symbols that must always be exported.
-include_expsyms=$lt_include_expsyms
-
-# Commands necessary for linking programs (against libraries) with templates.
-prelink_cmds=$lt_prelink_cmds
-
-# Specify filename containing input files.
-file_list_spec=$lt_file_list_spec
-
-# How to hardcode a shared library path into an executable.
-hardcode_action=$hardcode_action
-
-# ### END LIBTOOL CONFIG
-
-_LT_EOF
-
-  case $host_os in
-  aix3*)
-    cat <<\_LT_EOF >> "$cfgfile"
-# AIX sometimes has problems with the GCC collect2 program.  For some
-# reason, if we set the COLLECT_NAMES environment variable, the problems
-# vanish in a puff of smoke.
-if test "X${COLLECT_NAMES+set}" != Xset; then
-  COLLECT_NAMES=
-  export COLLECT_NAMES
-fi
-_LT_EOF
-    ;;
-  esac
-
-
-ltmain="$ac_aux_dir/ltmain.sh"
-
-
-  # We use sed instead of cat because bash on DJGPP gets confused if
-  # if finds mixed CR/LF and LF-only lines.  Since sed operates in
-  # text mode, it properly converts lines to CR/LF.  This bash problem
-  # is reportedly fixed, but why not run on old versions too?
-  sed '/^# Generated shell functions inserted here/q' "$ltmain" >> "$cfgfile" \
-    || (rm -f "$cfgfile"; exit 1)
-
-  case $xsi_shell in
-  yes)
-    cat << \_LT_EOF >> "$cfgfile"
-
-# func_dirname file append nondir_replacement
-# Compute the dirname of FILE.  If nonempty, add APPEND to the result,
-# otherwise set result to NONDIR_REPLACEMENT.
-func_dirname ()
-{
-  case ${1} in
-    */*) func_dirname_result="${1%/*}${2}" ;;
-    *  ) func_dirname_result="${3}" ;;
-  esac
-}
-
-# func_basename file
-func_basename ()
-{
-  func_basename_result="${1##*/}"
-}
-
-# func_dirname_and_basename file append nondir_replacement
-# perform func_basename and func_dirname in a single function
-# call:
-#   dirname:  Compute the dirname of FILE.  If nonempty,
-#             add APPEND to the result, otherwise set result
-#             to NONDIR_REPLACEMENT.
-#             value returned in "$func_dirname_result"
-#   basename: Compute filename of FILE.
-#             value retuned in "$func_basename_result"
-# Implementation must be kept synchronized with func_dirname
-# and func_basename. For efficiency, we do not delegate to
-# those functions but instead duplicate the functionality here.
-func_dirname_and_basename ()
-{
-  case ${1} in
-    */*) func_dirname_result="${1%/*}${2}" ;;
-    *  ) func_dirname_result="${3}" ;;
-  esac
-  func_basename_result="${1##*/}"
-}
-
-# func_stripname prefix suffix name
-# strip PREFIX and SUFFIX off of NAME.
-# PREFIX and SUFFIX must not contain globbing or regex special
-# characters, hashes, percent signs, but SUFFIX may contain a leading
-# dot (in which case that matches only a dot).
-func_stripname ()
-{
-  # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are
-  # positional parameters, so assign one to ordinary parameter first.
-  func_stripname_result=${3}
-  func_stripname_result=${func_stripname_result#"${1}"}
-  func_stripname_result=${func_stripname_result%"${2}"}
-}
-
-# func_opt_split
-func_opt_split ()
-{
-  func_opt_split_opt=${1%%=*}
-  func_opt_split_arg=${1#*=}
-}
-
-# func_lo2o object
-func_lo2o ()
-{
-  case ${1} in
-    *.lo) func_lo2o_result=${1%.lo}.${objext} ;;
-    *)    func_lo2o_result=${1} ;;
-  esac
-}
-
-# func_xform libobj-or-source
-func_xform ()
-{
-  func_xform_result=${1%.*}.lo
-}
-
-# func_arith arithmetic-term...
-func_arith ()
-{
-  func_arith_result=$(( $* ))
-}
-
-# func_len string
-# STRING may not start with a hyphen.
-func_len ()
-{
-  func_len_result=${#1}
-}
-
-_LT_EOF
-    ;;
-  *) # Bourne compatible functions.
-    cat << \_LT_EOF >> "$cfgfile"
-
-# func_dirname file append nondir_replacement
-# Compute the dirname of FILE.  If nonempty, add APPEND to the result,
-# otherwise set result to NONDIR_REPLACEMENT.
-func_dirname ()
-{
-  # Extract subdirectory from the argument.
-  func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"`
-  if test "X$func_dirname_result" = "X${1}"; then
-    func_dirname_result="${3}"
-  else
-    func_dirname_result="$func_dirname_result${2}"
-  fi
-}
-
-# func_basename file
-func_basename ()
-{
-  func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"`
-}
-
-
-# func_stripname prefix suffix name
-# strip PREFIX and SUFFIX off of NAME.
-# PREFIX and SUFFIX must not contain globbing or regex special
-# characters, hashes, percent signs, but SUFFIX may contain a leading
-# dot (in which case that matches only a dot).
-# func_strip_suffix prefix name
-func_stripname ()
-{
-  case ${2} in
-    .*) func_stripname_result=`$ECHO "X${3}" \
-           | $Xsed -e "s%^${1}%%" -e "s%\\\\${2}\$%%"`;;
-    *)  func_stripname_result=`$ECHO "X${3}" \
-           | $Xsed -e "s%^${1}%%" -e "s%${2}\$%%"`;;
-  esac
-}
-
-# sed scripts:
-my_sed_long_opt='1s/^\(-[^=]*\)=.*/\1/;q'
-my_sed_long_arg='1s/^-[^=]*=//'
-
-# func_opt_split
-func_opt_split ()
-{
-  func_opt_split_opt=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_opt"`
-  func_opt_split_arg=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_arg"`
-}
-
-# func_lo2o object
-func_lo2o ()
-{
-  func_lo2o_result=`$ECHO "X${1}" | $Xsed -e "$lo2o"`
-}
-
-# func_xform libobj-or-source
-func_xform ()
-{
-  func_xform_result=`$ECHO "X${1}" | $Xsed -e 's/\.[^.]*$/.lo/'`
-}
-
-# func_arith arithmetic-term...
-func_arith ()
-{
-  func_arith_result=`expr "$@"`
-}
-
-# func_len string
-# STRING may not start with a hyphen.
-func_len ()
-{
-  func_len_result=`expr "$1" : ".*" 2>/dev/null || echo $max_cmd_len`
-}
-
-_LT_EOF
-esac
-
-case $lt_shell_append in
-  yes)
-    cat << \_LT_EOF >> "$cfgfile"
-
-# func_append var value
-# Append VALUE to the end of shell variable VAR.
-func_append ()
-{
-  eval "$1+=\$2"
-}
-_LT_EOF
-    ;;
-  *)
-    cat << \_LT_EOF >> "$cfgfile"
-
-# func_append var value
-# Append VALUE to the end of shell variable VAR.
-func_append ()
-{
-  eval "$1=\$$1\$2"
-}
-
-_LT_EOF
-    ;;
-  esac
-
-
-  sed -n '/^# Generated shell functions inserted here/,$p' "$ltmain" >> "$cfgfile" \
-    || (rm -f "$cfgfile"; exit 1)
-
-  mv -f "$cfgfile" "$ofile" ||
-    (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
-  chmod +x "$ofile"
-
- ;;
-
-  esac
-done # for ac_tag
-
-
-as_fn_exit 0
-_ACEOF
-ac_clean_files=$ac_clean_files_save
-
-test $ac_write_fail = 0 ||
-  as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5
-
-
-# configure is writing to config.log, and then calls config.status.
-# config.status does its own redirection, appending to config.log.
-# Unfortunately, on DOS this fails, as config.log is still kept open
-# by configure, so config.status won't be able to write to it; its
-# output is simply discarded.  So we exec the FD to /dev/null,
-# effectively closing config.log, so it can be properly (re)opened and
-# appended to by config.status.  When coming back to configure, we
-# need to make the FD available again.
-if test "$no_create" != yes; then
-  ac_cs_success=:
-  ac_config_status_args=
-  test "$silent" = yes &&
-    ac_config_status_args="$ac_config_status_args --quiet"
-  exec 5>/dev/null
-  $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
-  exec 5>>config.log
-  # Use ||, not &&, to avoid exiting from the if with $? = 1, which
-  # would make configure fail if this is the last instruction.
-  $ac_cs_success || as_fn_exit 1
-fi
-if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5
-$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;}
-fi
-
-
-
-#####################################################################
-## Info
-
-echo
-echo
-echo
-echo "------------------------------------------------------------------------"
-echo "$PACKAGE_NAME $PACKAGE_VERSION"
-echo "------------------------------------------------------------------------"
-echo
-echo "Configuration Options Summary:"
-echo
-echo "  Amalgamation.........: ${do_amalgamation}"
-echo "  Secure layer.........: ${secure_layer}"
-if test "x${have_gnutls}" = "xyes" || test "x${have_openssl}" = "xyes" ; then
-   echo "    Cipher support.....: ${have_cipher}"
-   echo "    Signature..........: ${have_signature}"
-fi
-echo
-echo "  Old eet file format..: ${old_eet_file_format}"
-echo
-echo "  Tests................: ${enable_tests}"
-echo "  Coverage.............: ${enable_coverage}"
-echo
-echo "  Build eet............: $have_eet"
-echo
-echo "  Documentation........: ${build_doc}"
-if test "x${build_doc}" = "xyes" ; then
-   echo "    Building...........: make doc"
-fi
-echo "  Examples.............: ${build_examples}"
-if test "x${build_examples}" = "xyes" ; then
-   echo "    Install............: ${install_examples}"
-fi
-echo
-echo "Compilation............: make (or gmake)"
-echo "  CPPFLAGS.............: $CPPFLAGS"
-echo "  CFLAGS...............: $CFLAGS"
-echo "  LDFLAGS..............: $LDFLAGS"
-echo
-echo "Installation...........: make install (as root if needed, with 'su' or 'sudo')"
-echo "  prefix...............: $prefix"
-echo
diff --git a/libraries/eet/configure.ac b/libraries/eet/configure.ac
deleted file mode 100644
index eb3c7e5..0000000
--- a/libraries/eet/configure.ac
+++ /dev/null
@@ -1,549 +0,0 @@
-##--##--##--##--##--##--##--##--##--##--##--##--##--##--##--##--##
-##--##--##--##--##--##--##--##--##--##--##--##--##--##--##--##--##
-m4_define([v_maj], [1])
-m4_define([v_min], [6])
-m4_define([v_mic], [0])
-m4_define([v_rev], m4_esyscmd([(svnversion "${SVN_REPO_PATH:-.}" | grep -v '\(export\|Unversioned directory\)' || echo 0) | awk -F : '{printf("%s\n", $1);}' | tr -d ' :MSP\n']))
-m4_if(v_rev, [0], [m4_define([v_rev], m4_esyscmd([git log 2> /dev/null | (grep -m1 git-svn-id || echo 0) | sed -e 's/.*@\([0-9]*\).*/\1/' | tr -d '\n']))])
-##--   When released, remove the dnl on the below line
-m4_undefine([v_rev])
-##--   When doing snapshots - change soname. remove dnl on below line
-dnl m4_define([relname], [ver-pre-svn-05])
-dnl m4_define([v_rel], [-release relname])
-##--##--##--##--##--##--##--##--##--##--##--##--##--##--##--##--##
-m4_ifdef([v_rev], [m4_define([v_ver], [v_maj.v_min.v_mic.v_rev])], [m4_define([v_ver], [v_maj.v_min.v_mic])])
-m4_define([lt_cur], m4_eval(v_maj + v_min))
-m4_define([lt_rev], v_mic)
-m4_define([lt_age], v_min)
-##--##--##--##--##--##--##--##--##--##--##--##--##--##--##--##--##
-##--##--##--##--##--##--##--##--##--##--##--##--##--##--##--##--##
-
-AC_INIT([eet], [v_ver]-alpha, [enlightenment-devel@lists.sourceforge.net])
-AC_PREREQ([2.52])
-AC_CONFIG_SRCDIR([configure.ac])
-AC_CONFIG_MACRO_DIR([m4])
-
-AC_CONFIG_HEADERS([config.h])
-AH_TOP([
-#ifndef EFL_CONFIG_H__
-#define EFL_CONFIG_H__
-])
-AH_BOTTOM([
-#endif /* EFL_CONFIG_H__ */
-])
-
-AM_INIT_AUTOMAKE([1.6 dist-bzip2])
-m4_ifdef([AM_SILENT_RULES], [AM_SILENT_RULES([yes])])
-
-AC_LIBTOOL_WIN32_DLL
-define([AC_LIBTOOL_LANG_CXX_CONFIG], [:])dnl
-define([AC_LIBTOOL_LANG_F77_CONFIG], [:])dnl
-AC_PROG_LIBTOOL
-
-##--##--##--##--##--##--##--##--##--##--##--##--##--##--##--##--##
-##--##--##--##--##--##--##--##--##--##--##--##--##--##--##--##--##
-m4_ifdef([v_rev], , [m4_define([v_rev], [0])])
-m4_ifdef([v_rel], , [m4_define([v_rel], [])])
-AC_DEFINE_UNQUOTED(VMAJ, [v_maj], [Major version])
-AC_DEFINE_UNQUOTED(VMIN, [v_min], [Minor version])
-AC_DEFINE_UNQUOTED(VMIC, [v_mic], [Micro version])
-AC_DEFINE_UNQUOTED(VREV, [v_rev], [Revison])
-version_info="lt_cur:lt_rev:lt_age"
-release_info="v_rel"
-AC_SUBST(version_info)
-AC_SUBST(release_info)
-##--##--##--##--##--##--##--##--##--##--##--##--##--##--##--##--##
-##--##--##--##--##--##--##--##--##--##--##--##--##--##--##--##--##
-VMAJ=v_maj
-AC_SUBST(VMAJ)
-
-
-### Needed information
-
-AC_CANONICAL_BUILD
-AC_CANONICAL_HOST
-
-### Default options with respect to host
-
-want_gnutls="auto"
-want_openssl="auto"
-want_cipher="yes"
-want_signature="yes"
-
-requirement_eet=""
-
-
-### Additional options to configure
-
-# Amalgamation
-
-AC_ARG_ENABLE([amalgamation],
-   [AC_HELP_STRING([--enable-amalgamation], [enable generation of one single file with all source code in it, helps compiler optimizations.])],
-   [if test "x${enableval}" = "xyes"; then
-       do_amalgamation="yes"
-    else
-       do_amalgamation="no"
-    fi
-   ],
-   [do_amalgamation="no"]
-)
-AM_CONDITIONAL(EET_AMALGAMATION, test "x${do_amalgamation}" = "xyes")
-
-EFL_ENABLE_BIN([eet])
-
-# Old eet file format support
-
-old_eet_file_format="yes"
-AC_ARG_ENABLE(old-eet-file-format,
-   [AC_HELP_STRING(
-      [--disable-old-eet-file-format],
-      [disable old eet file format support. [[default=enabled]]]
-    )],
-   [old_eet_file_format=$enableval]
-)
-AC_MSG_CHECKING([whether to support old eet file format])
-AC_MSG_RESULT([${old_eet_file_format}])
-
-if test "x${old_eet_file_format}" = "xyes" ; then
-   AC_DEFINE(EET_OLD_EET_FILE_FORMAT, 1, [support old eet file format])
-else
-   AC_DEFINE(EET_OLD_EET_FILE_FORMAT, 0, [support old eet file format])
-fi
-
-# Openssl support
-
-AC_ARG_ENABLE([openssl],
-   [AC_HELP_STRING([--disable-openssl], [disable openssl eet support])],
-   [want_openssl=$enableval]
-)
-AC_MSG_CHECKING([whether to use OpenSSL])
-AC_MSG_RESULT([${want_openssl}])
-
-# Cryptography support
-
-AC_ARG_ENABLE([cipher],
-   [AC_HELP_STRING([--disable-cipher], [disable cipher support for eet API])],
-   [want_cipher=$enableval]
-)
-AC_MSG_CHECKING([whether to use cipher])
-AC_MSG_RESULT([${want_cipher}])
-
-AC_ARG_ENABLE([signature],
-   [AC_HELP_STRING([--disable-signature], [disable signature file support for eet])],
-   [want_signature=$enableval]
-)
-AC_MSG_CHECKING([whether to use signature])
-AC_MSG_RESULT([${want_signature}])
-
-# Assert or fail.
-prefer_assert="no"
-AC_ARG_ENABLE([assert],
-   [AC_HELP_STRING([--enable-assert], [enable assert, [[default=disabled]]])],
-   [prefer_assert=$enableval]
-)
-
-# Examples
-
-AC_ARG_ENABLE([install-examples],
-   [AC_HELP_STRING([--disable-install-examples],
-       [disable installing examples (compiled or just source). @<:@default==enabled@:>@])],
-   [
-    if test "x${enableval}" = "xyes" ; then
-       install_examples="yes"
-    else
-       install_examples="no"
-    fi
-   ],
-   [install_examples="yes"])
-AM_CONDITIONAL([INSTALL_EXAMPLES], [test "x${install_examples}" = "xyes"])
-
-AC_ARG_ENABLE([build-examples],
-   [AC_HELP_STRING([--enable-build-examples],
-       [enable building examples. @<:@default==disabled@:>@])],
-   [
-    if test "x${enableval}" = "xyes" ; then
-       build_examples="yes"
-    else
-       build_examples="no"
-    fi
-   ],
-   [build_examples="no"])
-AM_CONDITIONAL([BUILD_EXAMPLES], [test "x${build_examples}" = "xyes"])
-
-# Unit tests, coverage and benchmarking
-
-EFL_CHECK_TESTS([enable_tests="yes"], [enable_tests="no"])
-EFL_CHECK_COVERAGE([${enable_tests}], [enable_coverage="yes"], [enable_coverage="no"])
-
-if test "x${prefer_assert}" = "xno"; then
-   DEBUG_CFLAGS="-DNDEBUG"
-else
-# use debug symbols and set DEBUG if coverage support is enabled
-   DEBUG_CFLAGS="${EFL_DEBUG_CFLAGS}"
-fi
-AC_SUBST(DEBUG_CFLAGS)
-
-
-### Checks for programs
-AC_PROG_CC
-
-# pkg-config
-PKG_PROG_PKG_CONFIG
-
-# Check whether pkg-config supports Requires.private
-if $PKG_CONFIG --atleast-pkgconfig-version 0.22; then
-   pkgconfig_requires_private="Requires.private"
-else
-   pkgconfig_requires_private="Requires"
-fi
-AC_SUBST(pkgconfig_requires_private)
-
-
-# doxygen program for documentation building
-
-EFL_CHECK_DOXYGEN([build_doc="yes"], [build_doc="no"])
-
-### Checks for libraries
-
-# Evil library for compilation on Windows
-
-EFL_EET_BUILD=""
-case "$host_os" in
-   mingw*)
-      PKG_CHECK_MODULES([EVIL], [evil >= 1.0.0])
-      AC_DEFINE(HAVE_EVIL, 1, [Set to 1 if Evil library is installed])
-      requirement_eet="evil ${requirement_eet}"
-      EFL_EET_BUILD="-DEFL_EET_BUILD"
-   ;;
-esac
-AC_SUBST(EFL_EET_BUILD)
-
-EET_LIBS=""
-case "$host_os" in
-   mingw32ce*)
-      EET_LIBS="-lws2"
-      ;;
-   mingw*)
-      EET_LIBS="-lws2_32"
-      ;;
-esac
-AC_SUBST(EET_LIBS)
-
-# Eina library
-
-PKG_CHECK_MODULES(EINA, [eina >= 1.2.0])
-requirement_eet="eina >= 1.2.0 ${requirement_eet}"
-
-### Checks for portability layer
-
-PKG_CHECK_MODULES([EXOTIC],
-   [exotic],
-   [enable_exotic="yes"],
-   [enable_exotic="no"])
-
-if test "x${enable_exotic}" = "xyes"; then
-    requirement_eet="exotic ${requirement_eet}"
-
-    AC_DEFINE([HAVE_EXOTIC_H], [1], [Define to 1 if you have Exotic.])
-fi
-
-# Gnutls support
-
-AC_ARG_ENABLE([gnutls],
-   [AC_HELP_STRING([--disable-gnutls], [disable gnutls eet support])],
-   [want_gnutls=$enableval]
-)
-AC_MSG_CHECKING([whether to use Gnutls])
-AC_MSG_RESULT([${want_gnutls}])
-
-# Gnutls library
-have_gnutls="no"
-if test "x${want_gnutls}" = "xyes" || test "x${want_gnutls}" = "xauto" ; then
-   PKG_CHECK_MODULES(GNUTLS, [gnutls >= 1.7.6],
-      [
-       have_gnutls="yes"
-       want_openssl="no"
-       AC_DEFINE(HAVE_GNUTLS, 1, [Have Gnutls support])
-       requirement_eet="gnutls ${requirement_eet}"
-      ],
-      [have_gnutls="no"])
-   if test "x${have_gnutls}" = "xyes" ; then
-      AC_PATH_GENERIC([libgcrypt], [], [have_gnutls="yes"], [have_gnutls="no"])
-      if test "x${have_gnutls}" = "xyes" ; then
-         GNUTLS_CFLAGS="${GNUTLS_CFLAGS} ${LIBGCRYPT_CFLAGS}"
-         GNUTLS_LIBS="${GNUTLS_LIBS} ${LIBGCRYPT_LIBS}"
-      fi
-   fi
-fi
-
-# Specific GNUTLS improvement
-
-new_gnutls_api="yes"
-AC_ARG_ENABLE(new-gnutls-api,
-   [AC_HELP_STRING(
-      [--disable-new-gnutls-api],
-      [enable use of gnutls_x509_crt_verify_hash. [[default=enable]]]
-    )],
-   [new_gnutls_api=$enableval]
-)
-AC_MSG_CHECKING([whether to use gnutls_x509_crt_verify_hash])
-AC_MSG_RESULT([${new_gnutls_api}])
-
-if test "x${new_gnutls_api}" = "xyes" ; then
-   tmp_CFLAGS="${CFLAGS}"
-   tmp_LIBS="${LIBS}"
-   CFLAGS="${GNUTLS_CFLAGS}"
-   LIBS="${GNUTLS_LIBS}"
-   AC_CHECK_LIB(gnutls, gnutls_x509_crt_verify_hash,
-                [ new_gnutls_api="yes" ],
-                [ new_gnutls_api="no" ]
-                )
-   CFLAGS="${tmp_CFLAGS}"
-   LIBS="${tmp_LIBS}"
-
-   if test "x${new_gnutls_api}" = "xyes"; then
-      AC_DEFINE(EET_USE_NEW_GNUTLS_API, 1, [use gnutls_x509_crt_verify_hash])
-   fi
-fi
-
-use_gnutls_privkey_sign_data="no"
-if test "x${want_gnutls}" = "xyes" -o "x${want_gnutls}" = "xauto"; then
-   tmp_CFLAGS="${CFLAGS}"
-   tmp_LIBS="${LIBS}"
-   CFLAGS="${GNUTLS_CFLAGS}"
-   LIBS="${GNUTLS_LIBS}"
-   AC_CHECK_LIB(gnutls, gnutls_privkey_sign_data,
-                [ use_gnutls_privkey_sign_data="yes" ],
-                [ use_gnutls_privkey_sign_data="no" ]
-                )
-   CFLAGS="${tmp_CFLAGS}"
-   LIBS="${tmp_LIBS}"
-
-   if test "x${use_gnutls_privkey_sign_data}" = "xyes"; then
-      AC_DEFINE(EET_USE_NEW_PRIVKEY_SIGN_DATA, 1, [use gnutls_privkey_sign_data])
-   fi
-fi
-AC_MSG_CHECKING([whether to use gnutls_privkey_sign_data])
-AC_MSG_RESULT([${use_gnutls_privkey_sign_data}])
-
-use_gnutls_pubkey_verify_hash="no"
-if test "x${want_gnutls}" = "xyes" -o "x${want_gnutls}" = "xauto"; then
-   tmp_CFLAGS="${CFLAGS}"
-   tmp_LIBS="${LIBS}"
-   CFLAGS="${GNUTLS_CFLAGS}"
-   LIBS="${GNUTLS_LIBS}"
-   AC_CHECK_LIB(gnutls, gnutls_pubkey_verify_hash,
-                [ use_gnutls_pubkey_verify_hash="yes" ],
-                [ use_gnutls_pubkey_verify_hash="no" ]
-                )
-   CFLAGS="${tmp_CFLAGS}"
-   LIBS="${tmp_LIBS}"
-
-   if test "x${use_gnutls_pubkey_verify_hash}" = "xyes"; then
-      AC_DEFINE(EET_USE_NEW_PUBKEY_VERIFY_HASH, 1, [use gnutls_pubkey_verify_hash])
-   fi
-fi
-AC_MSG_CHECKING([whether to use gnutls_pubkey_verify_hash])
-AC_MSG_RESULT([${use_gnutls_pubkey_verify_hash}])
-
-# Openssl library
-have_openssl="no"
-if test "x${want_openssl}" = "xyes" || test "x${want_openssl}" = "xauto" ; then
-   PKG_CHECK_MODULES(OPENSSL, openssl,
-      [
-       have_openssl="yes"
-       AC_DEFINE(HAVE_OPENSSL, 1, [Have Openssl support])
-       requirement_eet="openssl ${requirement_eet}"
-      ],
-      [have_openssl="no"])
-fi
-
-if test "x${have_gnutls}" = "xyes" ; then
-   secure_layer="GnuTLS"
-elif test "x${have_openssl}" = "xyes" ; then
-   secure_layer="OpenSSL"
-else
-   secure_layer="no"
-fi
-
-have_cipher="no"
-if test "x${have_gnutls}" = "xyes" && test "x${want_cipher}" = "xyes" ; then
-   have_cipher="yes"
-   AC_DEFINE(HAVE_CIPHER, 1, [Have cipher support built in eet])
-elif test "x${have_openssl}" = "xyes" && test "x${want_cipher}" = "xyes" ; then
-   have_cipher="yes"
-   AC_DEFINE(HAVE_CIPHER, 1, [Have cipher support built in eet])
-fi
-
-AC_MSG_CHECKING(whether to activate cipher support in eet)
-AC_MSG_RESULT(${have_cipher})
-
-have_signature="no"
-if test "x${have_gnutls}" = "xyes" && test "x${want_signature}" = "xyes" ; then
-   have_signature="yes"
-   AC_DEFINE(HAVE_SIGNATURE, 1, [Have signature support for eet file])
-elif test "x${have_openssl}" = "xyes" && test "x${want_signature}" = "xyes" ; then
-   have_signature="yes"
-   AC_DEFINE(HAVE_SIGNATURE, 1, [Have signature support for eet file])
-fi
-
-AC_MSG_CHECKING(whether to activate signature support in eet)
-AC_MSG_RESULT(${have_signature})
-
-### Checks for header files
-
-AC_CHECK_HEADER([zlib.h],
-   [dummy="yes"],
-   [AC_MSG_ERROR("Cannot find zlib.h. Make sure your CFLAGS environment variable contains include lines for the location of this file")])
-
-AC_CHECK_HEADER([jpeglib.h],
-   [dummy="yes"],
-   [AC_MSG_ERROR("Cannot find jpeglib.h. Make sure your CFLAGS environment variable contains include lines for the location of this file")])
-
-AC_CHECK_HEADERS(netinet/in.h unistd.h)
-EFL_CHECK_PATH_MAX
-
-### Checks for types
-
-
-### Checks for structures
-
-
-### Checks for compiler characteristics
-AM_PROG_CC_C_O
-AC_C_CONST
-AC_C_INLINE
-AC_PROG_CC_STDC
-AC_C___ATTRIBUTE__
-
-# Check whether the null pointer is zero on this arch
-AC_TRY_RUN(
-   [
-#include <stdlib.h>
-#include <inttypes.h>
-int main (int argc, char **argv) {
-  void *foo = NULL;
-  uintptr_t bar = (uintptr_t)foo;
-  return (uintptr_t)foo;
-}
-   ],
-   [have_null="yes"],
-   [have_null="no"],
-   [
-    AC_MSG_WARN([Cannot check when cross-compiling -- assuming null is okay])
-    have_null="yes"
-   ])
-AC_MSG_CHECKING([value of the null pointer])
-AC_MSG_RESULT([${have_null}])
-
-if test ! "x${have_null}" = "xyes" ; then
-   AC_MSG_WARN([Your system is a bit too funny, eet might not work properly])
-fi
-
-# These are needed for fmemopen/open_memstream
-AC_DEFINE(_GNU_SOURCE, , [Enable GNU extensions])
-
-EET_CPPFLAGS=""
-EET_CFLAGS=""
-case "$host_os" in
-   mingw32ce*)
-      EET_CPPFLAGS="-D_WIN32_WCE=0x0420"
-      ;;
-   mingw*)
-      EET_CPPFLAGS="-D_WIN32_WINNT=0x0501"
-      ;;
-esac
-AC_SUBST(EET_CPPFLAGS)
-AC_SUBST(EET_CFLAGS)
-
-
-### Checks for linker characteristics
-
-# use --enable-auto-import on Windows
-
-lt_enable_auto_import=""
-case "$host_os" in
-   mingw*)
-      lt_enable_auto_import="-Wl,--enable-auto-import"
-      ;;
-esac
-AC_SUBST(lt_enable_auto_import)
-
-case "${host_os}" in
-   openbsd*)
-      ;;
-   *)
-      EFL_LINKER_FLAG([-Wl,--as-needed])
-      ;;
-esac
-
-
-### Checks for library functions
-AC_ISC_POSIX
-AC_FUNC_ALLOCA
-
-AC_CHECK_FUNCS(fmemopen open_memstream realpath)
-
-EFL_CHECK_FNMATCH([], [AC_MSG_ERROR([Cannot find fnmatch()])])
-
-
-AC_SUBST(requirement_eet)
-
-AC_OUTPUT([
-Makefile
-eet.pc
-doc/Makefile
-doc/Doxyfile
-doc/eet.dox
-src/Makefile
-src/lib/Makefile
-src/bin/Makefile
-src/tests/Makefile
-src/examples/Makefile
-eet.spec
-])
-
-
-#####################################################################
-## Info
-
-echo
-echo
-echo
-echo "------------------------------------------------------------------------"
-echo "$PACKAGE_NAME $PACKAGE_VERSION"
-echo "------------------------------------------------------------------------"
-echo
-echo "Configuration Options Summary:"
-echo
-echo "  Amalgamation.........: ${do_amalgamation}"
-echo "  Secure layer.........: ${secure_layer}"
-if test "x${have_gnutls}" = "xyes" || test "x${have_openssl}" = "xyes" ; then
-   echo "    Cipher support.....: ${have_cipher}"
-   echo "    Signature..........: ${have_signature}"
-fi
-echo
-echo "  Old eet file format..: ${old_eet_file_format}"
-echo
-echo "  Tests................: ${enable_tests}"
-echo "  Coverage.............: ${enable_coverage}"
-echo
-echo "  Build eet............: $have_eet"
-echo
-echo "  Documentation........: ${build_doc}"
-if test "x${build_doc}" = "xyes" ; then
-   echo "    Building...........: make doc"
-fi
-echo "  Examples.............: ${build_examples}"
-if test "x${build_examples}" = "xyes" ; then
-   echo "    Install............: ${install_examples}"
-fi
-echo
-echo "Compilation............: make (or gmake)"
-echo "  CPPFLAGS.............: $CPPFLAGS"
-echo "  CFLAGS...............: $CFLAGS"
-echo "  LDFLAGS..............: $LDFLAGS"
-echo
-echo "Installation...........: make install (as root if needed, with 'su' or 'sudo')"
-echo "  prefix...............: $prefix"
-echo
diff --git a/libraries/eet/depcomp b/libraries/eet/depcomp
deleted file mode 100755
index df8eea7..0000000
--- a/libraries/eet/depcomp
+++ /dev/null
@@ -1,630 +0,0 @@
-#! /bin/sh
-# depcomp - compile a program generating dependencies as side-effects
-
-scriptversion=2009-04-28.21; # UTC
-
-# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006, 2007, 2009 Free
-# Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# Originally written by Alexandre Oliva <oliva@dcc.unicamp.br>.
-
-case $1 in
-  '')
-     echo "$0: No command.  Try \`$0 --help' for more information." 1>&2
-     exit 1;
-     ;;
-  -h | --h*)
-    cat <<\EOF
-Usage: depcomp [--help] [--version] PROGRAM [ARGS]
-
-Run PROGRAMS ARGS to compile a file, generating dependencies
-as side-effects.
-
-Environment variables:
-  depmode     Dependency tracking mode.
-  source      Source file read by `PROGRAMS ARGS'.
-  object      Object file output by `PROGRAMS ARGS'.
-  DEPDIR      directory where to store dependencies.
-  depfile     Dependency file to output.
-  tmpdepfile  Temporary file to use when outputing dependencies.
-  libtool     Whether libtool is used (yes/no).
-
-Report bugs to <bug-automake@gnu.org>.
-EOF
-    exit $?
-    ;;
-  -v | --v*)
-    echo "depcomp $scriptversion"
-    exit $?
-    ;;
-esac
-
-if test -z "$depmode" || test -z "$source" || test -z "$object"; then
-  echo "depcomp: Variables source, object and depmode must be set" 1>&2
-  exit 1
-fi
-
-# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po.
-depfile=${depfile-`echo "$object" |
-  sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`}
-tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
-
-rm -f "$tmpdepfile"
-
-# Some modes work just like other modes, but use different flags.  We
-# parameterize here, but still list the modes in the big case below,
-# to make depend.m4 easier to write.  Note that we *cannot* use a case
-# here, because this file can only contain one case statement.
-if test "$depmode" = hp; then
-  # HP compiler uses -M and no extra arg.
-  gccflag=-M
-  depmode=gcc
-fi
-
-if test "$depmode" = dashXmstdout; then
-   # This is just like dashmstdout with a different argument.
-   dashmflag=-xM
-   depmode=dashmstdout
-fi
-
-cygpath_u="cygpath -u -f -"
-if test "$depmode" = msvcmsys; then
-   # This is just like msvisualcpp but w/o cygpath translation.
-   # Just convert the backslash-escaped backslashes to single forward
-   # slashes to satisfy depend.m4
-   cygpath_u="sed s,\\\\\\\\,/,g"
-   depmode=msvisualcpp
-fi
-
-case "$depmode" in
-gcc3)
-## gcc 3 implements dependency tracking that does exactly what
-## we want.  Yay!  Note: for some reason libtool 1.4 doesn't like
-## it if -MD -MP comes after the -MF stuff.  Hmm.
-## Unfortunately, FreeBSD c89 acceptance of flags depends upon
-## the command line argument order; so add the flags where they
-## appear in depend2.am.  Note that the slowdown incurred here
-## affects only configure: in makefiles, %FASTDEP% shortcuts this.
-  for arg
-  do
-    case $arg in
-    -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;;
-    *)  set fnord "$@" "$arg" ;;
-    esac
-    shift # fnord
-    shift # $arg
-  done
-  "$@"
-  stat=$?
-  if test $stat -eq 0; then :
-  else
-    rm -f "$tmpdepfile"
-    exit $stat
-  fi
-  mv "$tmpdepfile" "$depfile"
-  ;;
-
-gcc)
-## There are various ways to get dependency output from gcc.  Here's
-## why we pick this rather obscure method:
-## - Don't want to use -MD because we'd like the dependencies to end
-##   up in a subdir.  Having to rename by hand is ugly.
-##   (We might end up doing this anyway to support other compilers.)
-## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
-##   -MM, not -M (despite what the docs say).
-## - Using -M directly means running the compiler twice (even worse
-##   than renaming).
-  if test -z "$gccflag"; then
-    gccflag=-MD,
-  fi
-  "$@" -Wp,"$gccflag$tmpdepfile"
-  stat=$?
-  if test $stat -eq 0; then :
-  else
-    rm -f "$tmpdepfile"
-    exit $stat
-  fi
-  rm -f "$depfile"
-  echo "$object : \\" > "$depfile"
-  alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz
-## The second -e expression handles DOS-style file names with drive letters.
-  sed -e 's/^[^:]*: / /' \
-      -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
-## This next piece of magic avoids the `deleted header file' problem.
-## The problem is that when a header file which appears in a .P file
-## is deleted, the dependency causes make to die (because there is
-## typically no way to rebuild the header).  We avoid this by adding
-## dummy dependencies for each header file.  Too bad gcc doesn't do
-## this for us directly.
-  tr ' ' '
-' < "$tmpdepfile" |
-## Some versions of gcc put a space before the `:'.  On the theory
-## that the space means something, we add a space to the output as
-## well.
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly.  Breaking it into two sed invocations is a workaround.
-    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
-  rm -f "$tmpdepfile"
-  ;;
-
-hp)
-  # This case exists only to let depend.m4 do its work.  It works by
-  # looking at the text of this script.  This case will never be run,
-  # since it is checked for above.
-  exit 1
-  ;;
-
-sgi)
-  if test "$libtool" = yes; then
-    "$@" "-Wp,-MDupdate,$tmpdepfile"
-  else
-    "$@" -MDupdate "$tmpdepfile"
-  fi
-  stat=$?
-  if test $stat -eq 0; then :
-  else
-    rm -f "$tmpdepfile"
-    exit $stat
-  fi
-  rm -f "$depfile"
-
-  if test -f "$tmpdepfile"; then  # yes, the sourcefile depend on other files
-    echo "$object : \\" > "$depfile"
-
-    # Clip off the initial element (the dependent).  Don't try to be
-    # clever and replace this with sed code, as IRIX sed won't handle
-    # lines with more than a fixed number of characters (4096 in
-    # IRIX 6.2 sed, 8192 in IRIX 6.5).  We also remove comment lines;
-    # the IRIX cc adds comments like `#:fec' to the end of the
-    # dependency line.
-    tr ' ' '
-' < "$tmpdepfile" \
-    | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \
-    tr '
-' ' ' >> "$depfile"
-    echo >> "$depfile"
-
-    # The second pass generates a dummy entry for each header file.
-    tr ' ' '
-' < "$tmpdepfile" \
-   | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
-   >> "$depfile"
-  else
-    # The sourcefile does not contain any dependencies, so just
-    # store a dummy comment line, to avoid errors with the Makefile
-    # "include basename.Plo" scheme.
-    echo "#dummy" > "$depfile"
-  fi
-  rm -f "$tmpdepfile"
-  ;;
-
-aix)
-  # The C for AIX Compiler uses -M and outputs the dependencies
-  # in a .u file.  In older versions, this file always lives in the
-  # current directory.  Also, the AIX compiler puts `$object:' at the
-  # start of each line; $object doesn't have directory information.
-  # Version 6 uses the directory in both cases.
-  dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
-  test "x$dir" = "x$object" && dir=
-  base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
-  if test "$libtool" = yes; then
-    tmpdepfile1=$dir$base.u
-    tmpdepfile2=$base.u
-    tmpdepfile3=$dir.libs/$base.u
-    "$@" -Wc,-M
-  else
-    tmpdepfile1=$dir$base.u
-    tmpdepfile2=$dir$base.u
-    tmpdepfile3=$dir$base.u
-    "$@" -M
-  fi
-  stat=$?
-
-  if test $stat -eq 0; then :
-  else
-    rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
-    exit $stat
-  fi
-
-  for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
-  do
-    test -f "$tmpdepfile" && break
-  done
-  if test -f "$tmpdepfile"; then
-    # Each line is of the form `foo.o: dependent.h'.
-    # Do two passes, one to just change these to
-    # `$object: dependent.h' and one to simply `dependent.h:'.
-    sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
-    # That's a tab and a space in the [].
-    sed -e 's,^.*\.[a-z]*:[      ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
-  else
-    # The sourcefile does not contain any dependencies, so just
-    # store a dummy comment line, to avoid errors with the Makefile
-    # "include basename.Plo" scheme.
-    echo "#dummy" > "$depfile"
-  fi
-  rm -f "$tmpdepfile"
-  ;;
-
-icc)
-  # Intel's C compiler understands `-MD -MF file'.  However on
-  #    icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c
-  # ICC 7.0 will fill foo.d with something like
-  #    foo.o: sub/foo.c
-  #    foo.o: sub/foo.h
-  # which is wrong.  We want:
-  #    sub/foo.o: sub/foo.c
-  #    sub/foo.o: sub/foo.h
-  #    sub/foo.c:
-  #    sub/foo.h:
-  # ICC 7.1 will output
-  #    foo.o: sub/foo.c sub/foo.h
-  # and will wrap long lines using \ :
-  #    foo.o: sub/foo.c ... \
-  #     sub/foo.h ... \
-  #     ...
-
-  "$@" -MD -MF "$tmpdepfile"
-  stat=$?
-  if test $stat -eq 0; then :
-  else
-    rm -f "$tmpdepfile"
-    exit $stat
-  fi
-  rm -f "$depfile"
-  # Each line is of the form `foo.o: dependent.h',
-  # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'.
-  # Do two passes, one to just change these to
-  # `$object: dependent.h' and one to simply `dependent.h:'.
-  sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"
-  # Some versions of the HPUX 10.20 sed can't process this invocation
-  # correctly.  Breaking it into two sed invocations is a workaround.
-  sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" |
-    sed -e 's/$/ :/' >> "$depfile"
-  rm -f "$tmpdepfile"
-  ;;
-
-hp2)
-  # The "hp" stanza above does not work with aCC (C++) and HP's ia64
-  # compilers, which have integrated preprocessors.  The correct option
-  # to use with these is +Maked; it writes dependencies to a file named
-  # 'foo.d', which lands next to the object file, wherever that
-  # happens to be.
-  # Much of this is similar to the tru64 case; see comments there.
-  dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
-  test "x$dir" = "x$object" && dir=
-  base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
-  if test "$libtool" = yes; then
-    tmpdepfile1=$dir$base.d
-    tmpdepfile2=$dir.libs/$base.d
-    "$@" -Wc,+Maked
-  else
-    tmpdepfile1=$dir$base.d
-    tmpdepfile2=$dir$base.d
-    "$@" +Maked
-  fi
-  stat=$?
-  if test $stat -eq 0; then :
-  else
-     rm -f "$tmpdepfile1" "$tmpdepfile2"
-     exit $stat
-  fi
-
-  for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2"
-  do
-    test -f "$tmpdepfile" && break
-  done
-  if test -f "$tmpdepfile"; then
-    sed -e "s,^.*\.[a-z]*:,$object:," "$tmpdepfile" > "$depfile"
-    # Add `dependent.h:' lines.
-    sed -ne '2,${
-               s/^ *//
-               s/ \\*$//
-               s/$/:/
-               p
-             }' "$tmpdepfile" >> "$depfile"
-  else
-    echo "#dummy" > "$depfile"
-  fi
-  rm -f "$tmpdepfile" "$tmpdepfile2"
-  ;;
-
-tru64)
-   # The Tru64 compiler uses -MD to generate dependencies as a side
-   # effect.  `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'.
-   # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
-   # dependencies in `foo.d' instead, so we check for that too.
-   # Subdirectories are respected.
-   dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
-   test "x$dir" = "x$object" && dir=
-   base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
-
-   if test "$libtool" = yes; then
-      # With Tru64 cc, shared objects can also be used to make a
-      # static library.  This mechanism is used in libtool 1.4 series to
-      # handle both shared and static libraries in a single compilation.
-      # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d.
-      #
-      # With libtool 1.5 this exception was removed, and libtool now
-      # generates 2 separate objects for the 2 libraries.  These two
-      # compilations output dependencies in $dir.libs/$base.o.d and
-      # in $dir$base.o.d.  We have to check for both files, because
-      # one of the two compilations can be disabled.  We should prefer
-      # $dir$base.o.d over $dir.libs/$base.o.d because the latter is
-      # automatically cleaned when .libs/ is deleted, while ignoring
-      # the former would cause a distcleancheck panic.
-      tmpdepfile1=$dir.libs/$base.lo.d   # libtool 1.4
-      tmpdepfile2=$dir$base.o.d          # libtool 1.5
-      tmpdepfile3=$dir.libs/$base.o.d    # libtool 1.5
-      tmpdepfile4=$dir.libs/$base.d      # Compaq CCC V6.2-504
-      "$@" -Wc,-MD
-   else
-      tmpdepfile1=$dir$base.o.d
-      tmpdepfile2=$dir$base.d
-      tmpdepfile3=$dir$base.d
-      tmpdepfile4=$dir$base.d
-      "$@" -MD
-   fi
-
-   stat=$?
-   if test $stat -eq 0; then :
-   else
-      rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
-      exit $stat
-   fi
-
-   for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
-   do
-     test -f "$tmpdepfile" && break
-   done
-   if test -f "$tmpdepfile"; then
-      sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
-      # That's a tab and a space in the [].
-      sed -e 's,^.*\.[a-z]*:[    ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
-   else
-      echo "#dummy" > "$depfile"
-   fi
-   rm -f "$tmpdepfile"
-   ;;
-
-#nosideeffect)
-  # This comment above is used by automake to tell side-effect
-  # dependency tracking mechanisms from slower ones.
-
-dashmstdout)
-  # Important note: in order to support this mode, a compiler *must*
-  # always write the preprocessed file to stdout, regardless of -o.
-  "$@" || exit $?
-
-  # Remove the call to Libtool.
-  if test "$libtool" = yes; then
-    while test "X$1" != 'X--mode=compile'; do
-      shift
-    done
-    shift
-  fi
-
-  # Remove `-o $object'.
-  IFS=" "
-  for arg
-  do
-    case $arg in
-    -o)
-      shift
-      ;;
-    $object)
-      shift
-      ;;
-    *)
-      set fnord "$@" "$arg"
-      shift # fnord
-      shift # $arg
-      ;;
-    esac
-  done
-
-  test -z "$dashmflag" && dashmflag=-M
-  # Require at least two characters before searching for `:'
-  # in the target name.  This is to cope with DOS-style filenames:
-  # a dependency such as `c:/foo/bar' could be seen as target `c' otherwise.
-  "$@" $dashmflag |
-    sed 's:^[  ]*[^: ][^:][^:]*\:[    ]*:'"$object"'\: :' > "$tmpdepfile"
-  rm -f "$depfile"
-  cat < "$tmpdepfile" > "$depfile"
-  tr ' ' '
-' < "$tmpdepfile" | \
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly.  Breaking it into two sed invocations is a workaround.
-    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
-  rm -f "$tmpdepfile"
-  ;;
-
-dashXmstdout)
-  # This case only exists to satisfy depend.m4.  It is never actually
-  # run, as this mode is specially recognized in the preamble.
-  exit 1
-  ;;
-
-makedepend)
-  "$@" || exit $?
-  # Remove any Libtool call
-  if test "$libtool" = yes; then
-    while test "X$1" != 'X--mode=compile'; do
-      shift
-    done
-    shift
-  fi
-  # X makedepend
-  shift
-  cleared=no eat=no
-  for arg
-  do
-    case $cleared in
-    no)
-      set ""; shift
-      cleared=yes ;;
-    esac
-    if test $eat = yes; then
-      eat=no
-      continue
-    fi
-    case "$arg" in
-    -D*|-I*)
-      set fnord "$@" "$arg"; shift ;;
-    # Strip any option that makedepend may not understand.  Remove
-    # the object too, otherwise makedepend will parse it as a source file.
-    -arch)
-      eat=yes ;;
-    -*|$object)
-      ;;
-    *)
-      set fnord "$@" "$arg"; shift ;;
-    esac
-  done
-  obj_suffix=`echo "$object" | sed 's/^.*\././'`
-  touch "$tmpdepfile"
-  ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
-  rm -f "$depfile"
-  cat < "$tmpdepfile" > "$depfile"
-  sed '1,2d' "$tmpdepfile" | tr ' ' '
-' | \
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly.  Breaking it into two sed invocations is a workaround.
-    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
-  rm -f "$tmpdepfile" "$tmpdepfile".bak
-  ;;
-
-cpp)
-  # Important note: in order to support this mode, a compiler *must*
-  # always write the preprocessed file to stdout.
-  "$@" || exit $?
-
-  # Remove the call to Libtool.
-  if test "$libtool" = yes; then
-    while test "X$1" != 'X--mode=compile'; do
-      shift
-    done
-    shift
-  fi
-
-  # Remove `-o $object'.
-  IFS=" "
-  for arg
-  do
-    case $arg in
-    -o)
-      shift
-      ;;
-    $object)
-      shift
-      ;;
-    *)
-      set fnord "$@" "$arg"
-      shift # fnord
-      shift # $arg
-      ;;
-    esac
-  done
-
-  "$@" -E |
-    sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
-       -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
-    sed '$ s: \\$::' > "$tmpdepfile"
-  rm -f "$depfile"
-  echo "$object : \\" > "$depfile"
-  cat < "$tmpdepfile" >> "$depfile"
-  sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile"
-  rm -f "$tmpdepfile"
-  ;;
-
-msvisualcpp)
-  # Important note: in order to support this mode, a compiler *must*
-  # always write the preprocessed file to stdout.
-  "$@" || exit $?
-
-  # Remove the call to Libtool.
-  if test "$libtool" = yes; then
-    while test "X$1" != 'X--mode=compile'; do
-      shift
-    done
-    shift
-  fi
-
-  IFS=" "
-  for arg
-  do
-    case "$arg" in
-    -o)
-      shift
-      ;;
-    $object)
-      shift
-      ;;
-    "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
-        set fnord "$@"
-        shift
-        shift
-        ;;
-    *)
-        set fnord "$@" "$arg"
-        shift
-        shift
-        ;;
-    esac
-  done
-  "$@" -E 2>/dev/null |
-  sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u > "$tmpdepfile"
-  rm -f "$depfile"
-  echo "$object : \\" > "$depfile"
-  sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::      \1 \\:p' >> "$depfile"
-  echo "        " >> "$depfile"
-  sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile"
-  rm -f "$tmpdepfile"
-  ;;
-
-msvcmsys)
-  # This case exists only to let depend.m4 do its work.  It works by
-  # looking at the text of this script.  This case will never be run,
-  # since it is checked for above.
-  exit 1
-  ;;
-
-none)
-  exec "$@"
-  ;;
-
-*)
-  echo "Unknown depmode $depmode" 1>&2
-  exit 1
-  ;;
-esac
-
-exit 0
-
-# Local Variables:
-# mode: shell-script
-# sh-indentation: 2
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC"
-# time-stamp-end: "; # UTC"
-# End:
diff --git a/libraries/eet/doc/Doxyfile b/libraries/eet/doc/Doxyfile
deleted file mode 100644
index 26a32a7..0000000
--- a/libraries/eet/doc/Doxyfile
+++ /dev/null
@@ -1,1694 +0,0 @@
-# Doxyfile 1.7.3
-
-# This file describes the settings to be used by the documentation system
-# doxygen (www.doxygen.org) for a project.
-#
-# All text after a hash (#) is considered a comment and will be ignored.
-# The format is:
-#       TAG = value [value, ...]
-# For lists items can also be appended using:
-#       TAG += value [value, ...]
-# Values that contain spaces should be placed between quotes (" ").
-
-#---------------------------------------------------------------------------
-# Project related configuration options
-#---------------------------------------------------------------------------
-
-# This tag specifies the encoding used for all characters in the config file
-# that follow. The default is UTF-8 which is also the encoding used for all
-# text before the first occurrence of this tag. Doxygen uses libiconv (or the
-# iconv built into libc) for the transcoding. See
-# http://www.gnu.org/software/libiconv for the list of possible encodings.
-
-DOXYFILE_ENCODING      = UTF-8
-
-# The PROJECT_NAME tag is a single word (or a sequence of words surrounded
-# by quotes) that should identify the project.
-
-PROJECT_NAME           = Eet
-
-# The PROJECT_NUMBER tag can be used to enter a project or revision number.
-# This could be handy for archiving the generated documentation or
-# if some version control system is used.
-
-PROJECT_NUMBER         = 1.6.0-alpha
-
-# Using the PROJECT_BRIEF tag one can provide an optional one line description for a project that appears at the top of each page and should give viewer a quick idea about the purpose of the project. Keep the description short.
-
-PROJECT_BRIEF          =
-
-# With the PROJECT_LOGO tag one can specify an logo or icon that is
-# included in the documentation. The maximum height of the logo should not
-# exceed 55 pixels and the maximum width should not exceed 200 pixels.
-# Doxygen will copy the logo to the output directory.
-
-PROJECT_LOGO           =
-
-# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
-# base path where the generated documentation will be put.
-# If a relative path is entered, it will be relative to the location
-# where doxygen was started. If left blank the current directory will be used.
-
-OUTPUT_DIRECTORY       = .
-
-# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
-# 4096 sub-directories (in 2 levels) under the output directory of each output
-# format and will distribute the generated files over these directories.
-# Enabling this option can be useful when feeding doxygen a huge amount of
-# source files, where putting all generated files in the same directory would
-# otherwise cause performance problems for the file system.
-
-CREATE_SUBDIRS         = NO
-
-# The OUTPUT_LANGUAGE tag is used to specify the language in which all
-# documentation generated by doxygen is written. Doxygen will use this
-# information to generate all constant output in the proper language.
-# The default language is English, other supported languages are:
-# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
-# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,
-# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English
-# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian,
-# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak,
-# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.
-
-OUTPUT_LANGUAGE        = English
-
-# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
-# include brief member descriptions after the members that are listed in
-# the file and class documentation (similar to JavaDoc).
-# Set to NO to disable this.
-
-BRIEF_MEMBER_DESC      = YES
-
-# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
-# the brief description of a member or function before the detailed description.
-# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
-# brief descriptions will be completely suppressed.
-
-REPEAT_BRIEF           = YES
-
-# This tag implements a quasi-intelligent brief description abbreviator
-# that is used to form the text in various listings. Each string
-# in this list, if found as the leading text of the brief description, will be
-# stripped from the text and the result after processing the whole list, is
-# used as the annotated text. Otherwise, the brief description is used as-is.
-# If left blank, the following values are used ("$name" is automatically
-# replaced with the name of the entity): "The $name class" "The $name widget"
-# "The $name file" "is" "provides" "specifies" "contains"
-# "represents" "a" "an" "the"
-
-ABBREVIATE_BRIEF       =
-
-# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
-# Doxygen will generate a detailed section even if there is only a brief
-# description.
-
-ALWAYS_DETAILED_SEC    = NO
-
-# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
-# inherited members of a class in the documentation of that class as if those
-# members were ordinary class members. Constructors, destructors and assignment
-# operators of the base classes will not be shown.
-
-INLINE_INHERITED_MEMB  = NO
-
-# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
-# path before files name in the file list and in the header files. If set
-# to NO the shortest path that makes the file name unique will be used.
-
-FULL_PATH_NAMES        = NO
-
-# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
-# can be used to strip a user-defined part of the path. Stripping is
-# only done if one of the specified strings matches the left-hand part of
-# the path. The tag can be used to show relative paths in the file list.
-# If left blank the directory from which doxygen is run is used as the
-# path to strip.
-
-STRIP_FROM_PATH        =
-
-# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
-# the path mentioned in the documentation of a class, which tells
-# the reader which header file to include in order to use a class.
-# If left blank only the name of the header file containing the class
-# definition is used. Otherwise one should specify the include paths that
-# are normally passed to the compiler using the -I flag.
-
-STRIP_FROM_INC_PATH    =
-
-# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
-# (but less readable) file names. This can be useful if your file system
-# doesn't support long names like on DOS, Mac, or CD-ROM.
-
-SHORT_NAMES            = NO
-
-# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
-# will interpret the first line (until the first dot) of a JavaDoc-style
-# comment as the brief description. If set to NO, the JavaDoc
-# comments will behave just like regular Qt-style comments
-# (thus requiring an explicit @brief command for a brief description.)
-
-JAVADOC_AUTOBRIEF      = YES
-
-# If the QT_AUTOBRIEF tag is set to YES then Doxygen will
-# interpret the first line (until the first dot) of a Qt-style
-# comment as the brief description. If set to NO, the comments
-# will behave just like regular Qt-style comments (thus requiring
-# an explicit \brief command for a brief description.)
-
-QT_AUTOBRIEF           = NO
-
-# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
-# treat a multi-line C++ special comment block (i.e. a block of //! or ///
-# comments) as a brief description. This used to be the default behaviour.
-# The new default is to treat a multi-line C++ comment block as a detailed
-# description. Set this tag to YES if you prefer the old behaviour instead.
-
-MULTILINE_CPP_IS_BRIEF = NO
-
-# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
-# member inherits the documentation from any documented member that it
-# re-implements.
-
-INHERIT_DOCS           = YES
-
-# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
-# a new page for each member. If set to NO, the documentation of a member will
-# be part of the file/class/namespace that contains it.
-
-SEPARATE_MEMBER_PAGES  = NO
-
-# The TAB_SIZE tag can be used to set the number of spaces in a tab.
-# Doxygen uses this value to replace tabs by spaces in code fragments.
-
-TAB_SIZE               = 8
-
-# This tag can be used to specify a number of aliases that acts
-# as commands in the documentation. An alias has the form "name=value".
-# For example adding "sideeffect=\par Side Effects:\n" will allow you to
-# put the command \sideeffect (or @sideeffect) in the documentation, which
-# will result in a user-defined paragraph with heading "Side Effects:".
-# You can put \n's in the value part of an alias to insert newlines.
-
-ALIASES                =
-
-# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
-# sources only. Doxygen will then generate output that is more tailored for C.
-# For instance, some of the names that are used will be different. The list
-# of all members will be omitted, etc.
-
-OPTIMIZE_OUTPUT_FOR_C  = YES
-
-# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
-# sources only. Doxygen will then generate output that is more tailored for
-# Java. For instance, namespaces will be presented as packages, qualified
-# scopes will look different, etc.
-
-OPTIMIZE_OUTPUT_JAVA   = NO
-
-# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
-# sources only. Doxygen will then generate output that is more tailored for
-# Fortran.
-
-OPTIMIZE_FOR_FORTRAN   = NO
-
-# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
-# sources. Doxygen will then generate output that is tailored for
-# VHDL.
-
-OPTIMIZE_OUTPUT_VHDL   = NO
-
-# Doxygen selects the parser to use depending on the extension of the files it
-# parses. With this tag you can assign which parser to use for a given extension.
-# Doxygen has a built-in mapping, but you can override or extend it using this
-# tag. The format is ext=language, where ext is a file extension, and language
-# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C,
-# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make
-# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C
-# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions
-# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen.
-
-EXTENSION_MAPPING      =
-
-# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
-# to include (a tag file for) the STL sources as input, then you should
-# set this tag to YES in order to let doxygen match functions declarations and
-# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
-# func(std::string) {}). This also makes the inheritance and collaboration
-# diagrams that involve STL classes more complete and accurate.
-
-BUILTIN_STL_SUPPORT    = NO
-
-# If you use Microsoft's C++/CLI language, you should set this option to YES to
-# enable parsing support.
-
-CPP_CLI_SUPPORT        = NO
-
-# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
-# Doxygen will parse them like normal C++ but will assume all classes use public
-# instead of private inheritance when no explicit protection keyword is present.
-
-SIP_SUPPORT            = NO
-
-# For Microsoft's IDL there are propget and propput attributes to indicate getter
-# and setter methods for a property. Setting this option to YES (the default)
-# will make doxygen replace the get and set methods by a property in the
-# documentation. This will only work if the methods are indeed getting or
-# setting a simple type. If this is not the case, or you want to show the
-# methods anyway, you should set this option to NO.
-
-IDL_PROPERTY_SUPPORT   = YES
-
-# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
-# tag is set to YES, then doxygen will reuse the documentation of the first
-# member in the group (if any) for the other members of the group. By default
-# all members of a group must be documented explicitly.
-
-DISTRIBUTE_GROUP_DOC   = NO
-
-# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
-# the same type (for instance a group of public functions) to be put as a
-# subgroup of that type (e.g. under the Public Functions section). Set it to
-# NO to prevent subgrouping. Alternatively, this can be done per class using
-# the \nosubgrouping command.
-
-SUBGROUPING            = YES
-
-# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
-# is documented as struct, union, or enum with the name of the typedef. So
-# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
-# with name TypeT. When disabled the typedef will appear as a member of a file,
-# namespace, or class. And the struct will be named TypeS. This can typically
-# be useful for C code in case the coding convention dictates that all compound
-# types are typedef'ed and only the typedef is referenced, never the tag name.
-
-TYPEDEF_HIDES_STRUCT   = NO
-
-# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to
-# determine which symbols to keep in memory and which to flush to disk.
-# When the cache is full, less often used symbols will be written to disk.
-# For small to medium size projects (<1000 input files) the default value is
-# probably good enough. For larger projects a too small cache size can cause
-# doxygen to be busy swapping symbols to and from disk most of the time
-# causing a significant performance penalty.
-# If the system has enough physical memory increasing the cache will improve the
-# performance by keeping more symbols in memory. Note that the value works on
-# a logarithmic scale so increasing the size by one will roughly double the
-# memory usage. The cache size is given by this formula:
-# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,
-# corresponding to a cache size of 2^16 = 65536 symbols
-
-SYMBOL_CACHE_SIZE      = 0
-
-#---------------------------------------------------------------------------
-# Build related configuration options
-#---------------------------------------------------------------------------
-
-# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
-# documentation are documented, even if no documentation was available.
-# Private class members and static file members will be hidden unless
-# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
-
-EXTRACT_ALL            = NO
-
-# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
-# will be included in the documentation.
-
-EXTRACT_PRIVATE        = NO
-
-# If the EXTRACT_STATIC tag is set to YES all static members of a file
-# will be included in the documentation.
-
-EXTRACT_STATIC         = NO
-
-# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
-# defined locally in source files will be included in the documentation.
-# If set to NO only classes defined in header files are included.
-
-EXTRACT_LOCAL_CLASSES  = NO
-
-# This flag is only useful for Objective-C code. When set to YES local
-# methods, which are defined in the implementation section but not in
-# the interface are included in the documentation.
-# If set to NO (the default) only methods in the interface are included.
-
-EXTRACT_LOCAL_METHODS  = NO
-
-# If this flag is set to YES, the members of anonymous namespaces will be
-# extracted and appear in the documentation as a namespace called
-# 'anonymous_namespace{file}', where file will be replaced with the base
-# name of the file that contains the anonymous namespace. By default
-# anonymous namespaces are hidden.
-
-EXTRACT_ANON_NSPACES   = NO
-
-# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
-# undocumented members of documented classes, files or namespaces.
-# If set to NO (the default) these members will be included in the
-# various overviews, but no documentation section is generated.
-# This option has no effect if EXTRACT_ALL is enabled.
-
-HIDE_UNDOC_MEMBERS     = NO
-
-# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
-# undocumented classes that are normally visible in the class hierarchy.
-# If set to NO (the default) these classes will be included in the various
-# overviews. This option has no effect if EXTRACT_ALL is enabled.
-
-HIDE_UNDOC_CLASSES     = NO
-
-# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
-# friend (class|struct|union) declarations.
-# If set to NO (the default) these declarations will be included in the
-# documentation.
-
-HIDE_FRIEND_COMPOUNDS  = NO
-
-# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
-# documentation blocks found inside the body of a function.
-# If set to NO (the default) these blocks will be appended to the
-# function's detailed documentation block.
-
-HIDE_IN_BODY_DOCS      = NO
-
-# The INTERNAL_DOCS tag determines if documentation
-# that is typed after a \internal command is included. If the tag is set
-# to NO (the default) then the documentation will be excluded.
-# Set it to YES to include the internal documentation.
-
-INTERNAL_DOCS          = NO
-
-# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
-# file names in lower-case letters. If set to YES upper-case letters are also
-# allowed. This is useful if you have classes or files whose names only differ
-# in case and if your file system supports case sensitive file names. Windows
-# and Mac users are advised to set this option to NO.
-
-CASE_SENSE_NAMES       = YES
-
-# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
-# will show members with their full class and namespace scopes in the
-# documentation. If set to YES the scope will be hidden.
-
-HIDE_SCOPE_NAMES       = NO
-
-# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
-# will put a list of the files that are included by a file in the documentation
-# of that file.
-
-SHOW_INCLUDE_FILES     = NO
-
-# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen
-# will list include files with double quotes in the documentation
-# rather than with sharp brackets.
-
-FORCE_LOCAL_INCLUDES   = NO
-
-# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
-# is inserted in the documentation for inline members.
-
-INLINE_INFO            = YES
-
-# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
-# will sort the (detailed) documentation of file and class members
-# alphabetically by member name. If set to NO the members will appear in
-# declaration order.
-
-SORT_MEMBER_DOCS       = NO
-
-# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
-# brief documentation of file, namespace and class members alphabetically
-# by member name. If set to NO (the default) the members will appear in
-# declaration order.
-
-SORT_BRIEF_DOCS        = NO
-
-# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen
-# will sort the (brief and detailed) documentation of class members so that
-# constructors and destructors are listed first. If set to NO (the default)
-# the constructors will appear in the respective orders defined by
-# SORT_MEMBER_DOCS and SORT_BRIEF_DOCS.
-# This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO
-# and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO.
-
-SORT_MEMBERS_CTORS_1ST = NO
-
-# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
-# hierarchy of group names into alphabetical order. If set to NO (the default)
-# the group names will appear in their defined order.
-
-SORT_GROUP_NAMES       = NO
-
-# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
-# sorted by fully-qualified names, including namespaces. If set to
-# NO (the default), the class list will be sorted only by class name,
-# not including the namespace part.
-# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
-# Note: This option applies only to the class list, not to the
-# alphabetical list.
-
-SORT_BY_SCOPE_NAME     = NO
-
-# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper type resolution of all parameters of a function it will reject a
-# match between the prototype and the implementation of a member function even if there is only one candidate or it is obvious which candidate to choose by doing a simple string match. By disabling STRICT_PROTO_MATCHING doxygen
-# will still accept a match between prototype and implementation in such cases.
-
-STRICT_PROTO_MATCHING  = NO
-
-# The GENERATE_TODOLIST tag can be used to enable (YES) or
-# disable (NO) the todo list. This list is created by putting \todo
-# commands in the documentation.
-
-GENERATE_TODOLIST      = YES
-
-# The GENERATE_TESTLIST tag can be used to enable (YES) or
-# disable (NO) the test list. This list is created by putting \test
-# commands in the documentation.
-
-GENERATE_TESTLIST      = YES
-
-# The GENERATE_BUGLIST tag can be used to enable (YES) or
-# disable (NO) the bug list. This list is created by putting \bug
-# commands in the documentation.
-
-GENERATE_BUGLIST       = YES
-
-# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
-# disable (NO) the deprecated list. This list is created by putting
-# \deprecated commands in the documentation.
-
-GENERATE_DEPRECATEDLIST= YES
-
-# The ENABLED_SECTIONS tag can be used to enable conditional
-# documentation sections, marked by \if sectionname ... \endif.
-
-ENABLED_SECTIONS       =
-
-# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
-# the initial value of a variable or macro consists of for it to appear in
-# the documentation. If the initializer consists of more lines than specified
-# here it will be hidden. Use a value of 0 to hide initializers completely.
-# The appearance of the initializer of individual variables and macros in the
-# documentation can be controlled using \showinitializer or \hideinitializer
-# command in the documentation regardless of this setting.
-
-MAX_INITIALIZER_LINES  = 30
-
-# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
-# at the bottom of the documentation of classes and structs. If set to YES the
-# list will mention the files that were used to generate the documentation.
-
-SHOW_USED_FILES        = NO
-
-# If the sources in your project are distributed over multiple directories
-# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
-# in the documentation. The default is NO.
-
-SHOW_DIRECTORIES       = NO
-
-# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
-# This will remove the Files entry from the Quick Index and from the
-# Folder Tree View (if specified). The default is YES.
-
-SHOW_FILES             = YES
-
-# Set the SHOW_NAMESPACES tag to NO to disable the generation of the
-# Namespaces page.
-# This will remove the Namespaces entry from the Quick Index
-# and from the Folder Tree View (if specified). The default is YES.
-
-SHOW_NAMESPACES        = YES
-
-# The FILE_VERSION_FILTER tag can be used to specify a program or script that
-# doxygen should invoke to get the current version for each file (typically from
-# the version control system). Doxygen will invoke the program by executing (via
-# popen()) the command <command> <input-file>, where <command> is the value of
-# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
-# provided by doxygen. Whatever the program writes to standard output
-# is used as the file version. See the manual for examples.
-
-FILE_VERSION_FILTER    =
-
-# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
-# by doxygen. The layout file controls the global structure of the generated
-# output files in an output format independent way. The create the layout file
-# that represents doxygen's defaults, run doxygen with the -l option.
-# You can optionally specify a file name after the option, if omitted
-# DoxygenLayout.xml will be used as the name of the layout file.
-
-LAYOUT_FILE            =
-
-#---------------------------------------------------------------------------
-# configuration options related to warning and progress messages
-#---------------------------------------------------------------------------
-
-# The QUIET tag can be used to turn on/off the messages that are generated
-# by doxygen. Possible values are YES and NO. If left blank NO is used.
-
-QUIET                  = NO
-
-# The WARNINGS tag can be used to turn on/off the warning messages that are
-# generated by doxygen. Possible values are YES and NO. If left blank
-# NO is used.
-
-WARNINGS               = YES
-
-# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
-# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
-# automatically be disabled.
-
-WARN_IF_UNDOCUMENTED   = YES
-
-# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
-# potential errors in the documentation, such as not documenting some
-# parameters in a documented function, or documenting parameters that
-# don't exist or using markup commands wrongly.
-
-WARN_IF_DOC_ERROR      = YES
-
-# The WARN_NO_PARAMDOC option can be enabled to get warnings for
-# functions that are documented, but have no documentation for their parameters
-# or return value. If set to NO (the default) doxygen will only warn about
-# wrong or incomplete parameter documentation, but not about the absence of
-# documentation.
-
-WARN_NO_PARAMDOC       = YES
-
-# The WARN_FORMAT tag determines the format of the warning messages that
-# doxygen can produce. The string should contain the $file, $line, and $text
-# tags, which will be replaced by the file and line number from which the
-# warning originated and the warning text. Optionally the format may contain
-# $version, which will be replaced by the version of the file (if it could
-# be obtained via FILE_VERSION_FILTER)
-
-WARN_FORMAT            = "$file:$line: $text"
-
-# The WARN_LOGFILE tag can be used to specify a file to which warning
-# and error messages should be written. If left blank the output is written
-# to stderr.
-
-WARN_LOGFILE           =
-
-#---------------------------------------------------------------------------
-# configuration options related to the input files
-#---------------------------------------------------------------------------
-
-# The INPUT tag can be used to specify the files and/or directories that contain
-# documented source files. You may enter file names like "myfile.cpp" or
-# directories like "/usr/src/myproject". Separate the files or directories
-# with spaces.
-
-INPUT                  = ./eet.dox \
-                         ./examples.dox \
-                         ../src/lib
-
-# This tag can be used to specify the character encoding of the source files
-# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
-# also the default input encoding. Doxygen uses libiconv (or the iconv built
-# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
-# the list of possible encodings.
-
-INPUT_ENCODING         = UTF-8
-
-# If the value of the INPUT tag contains directories, you can use the
-# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
-# and *.h) to filter out the source-files in the directories. If left
-# blank the following patterns are tested:
-# *.c *.cc *.cxx *.cpp *.c++ *.d *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh
-# *.hxx *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.dox *.py
-# *.f90 *.f *.for *.vhd *.vhdl
-
-FILE_PATTERNS          = *.c \
-                         *.h
-
-# The RECURSIVE tag can be used to turn specify whether or not subdirectories
-# should be searched for input files as well. Possible values are YES and NO.
-# If left blank NO is used.
-
-RECURSIVE              = YES
-
-# The EXCLUDE tag can be used to specify files and/or directories that should
-# excluded from the INPUT source files. This way you can easily exclude a
-# subdirectory from a directory tree whose root is specified with the INPUT tag.
-
-EXCLUDE                = ../src/lib/eet_amalgamation.c
-
-# The EXCLUDE_SYMLINKS tag can be used select whether or not files or
-# directories that are symbolic links (a Unix file system feature) are excluded
-# from the input.
-
-EXCLUDE_SYMLINKS       = NO
-
-# If the value of the INPUT tag contains directories, you can use the
-# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
-# certain files from those directories. Note that the wildcards are matched
-# against the file with absolute path, so to exclude all test directories
-# for example use the pattern */test/*
-
-EXCLUDE_PATTERNS       =
-
-# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
-# (namespaces, classes, functions, etc.) that should be excluded from the
-# output. The symbol name can be a fully qualified name, a word, or if the
-# wildcard * is used, a substring. Examples: ANamespace, AClass,
-# AClass::ANamespace, ANamespace::*Test
-
-EXCLUDE_SYMBOLS        =
-
-# The EXAMPLE_PATH tag can be used to specify one or more files or
-# directories that contain example code fragments that are included (see
-# the \include command).
-
-EXAMPLE_PATH           = ../src/examples
-
-# If the value of the EXAMPLE_PATH tag contains directories, you can use the
-# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
-# and *.h) to filter out the source-files in the directories. If left
-# blank all files are included.
-
-EXAMPLE_PATTERNS       = *.c,*.h,*.x
-
-# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
-# searched for input files to be used with the \include or \dontinclude
-# commands irrespective of the value of the RECURSIVE tag.
-# Possible values are YES and NO. If left blank NO is used.
-
-EXAMPLE_RECURSIVE      = NO
-
-# The IMAGE_PATH tag can be used to specify one or more files or
-# directories that contain image that are included in the documentation (see
-# the \image command).
-
-IMAGE_PATH             = ../doc/img
-
-# The INPUT_FILTER tag can be used to specify a program that doxygen should
-# invoke to filter for each input file. Doxygen will invoke the filter program
-# by executing (via popen()) the command <filter> <input-file>, where <filter>
-# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
-# input file. Doxygen will then use the output that the filter program writes
-# to standard output.
-# If FILTER_PATTERNS is specified, this tag will be
-# ignored.
-
-INPUT_FILTER           =
-
-# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
-# basis.
-# Doxygen will compare the file name with each pattern and apply the
-# filter if there is a match.
-# The filters are a list of the form:
-# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
-# info on how filters are used. If FILTER_PATTERNS is empty or if
-# non of the patterns match the file name, INPUT_FILTER is applied.
-
-FILTER_PATTERNS        =
-
-# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
-# INPUT_FILTER) will be used to filter the input files when producing source
-# files to browse (i.e. when SOURCE_BROWSER is set to YES).
-
-FILTER_SOURCE_FILES    = NO
-
-# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
-# pattern. A pattern will override the setting for FILTER_PATTERN (if any)
-# and it is also possible to disable source filtering for a specific pattern
-# using *.ext= (so without naming a filter). This option only has effect when
-# FILTER_SOURCE_FILES is enabled.
-
-FILTER_SOURCE_PATTERNS =
-
-#---------------------------------------------------------------------------
-# configuration options related to source browsing
-#---------------------------------------------------------------------------
-
-# If the SOURCE_BROWSER tag is set to YES then a list of source files will
-# be generated. Documented entities will be cross-referenced with these sources.
-# Note: To get rid of all source code in the generated output, make sure also
-# VERBATIM_HEADERS is set to NO.
-
-SOURCE_BROWSER         = NO
-
-# Setting the INLINE_SOURCES tag to YES will include the body
-# of functions and classes directly in the documentation.
-
-INLINE_SOURCES         = NO
-
-# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
-# doxygen to hide any special comment blocks from generated source code
-# fragments. Normal C and C++ comments will always remain visible.
-
-STRIP_CODE_COMMENTS    = YES
-
-# If the REFERENCED_BY_RELATION tag is set to YES
-# then for each documented function all documented
-# functions referencing it will be listed.
-
-REFERENCED_BY_RELATION = YES
-
-# If the REFERENCES_RELATION tag is set to YES
-# then for each documented function all documented entities
-# called/used by that function will be listed.
-
-REFERENCES_RELATION    = YES
-
-# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
-# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
-# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
-# link to the source code.
-# Otherwise they will link to the documentation.
-
-REFERENCES_LINK_SOURCE = YES
-
-# If the USE_HTAGS tag is set to YES then the references to source code
-# will point to the HTML generated by the htags(1) tool instead of doxygen
-# built-in source browser. The htags tool is part of GNU's global source
-# tagging system (see http://www.gnu.org/software/global/global.html). You
-# will need version 4.8.6 or higher.
-
-USE_HTAGS              = NO
-
-# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
-# will generate a verbatim copy of the header file for each class for
-# which an include is specified. Set to NO to disable this.
-
-VERBATIM_HEADERS       = NO
-
-#---------------------------------------------------------------------------
-# configuration options related to the alphabetical class index
-#---------------------------------------------------------------------------
-
-# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
-# of all compounds will be generated. Enable this if the project
-# contains a lot of classes, structs, unions or interfaces.
-
-ALPHABETICAL_INDEX     = YES
-
-# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
-# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
-# in which this list will be split (can be a number in the range [1..20])
-
-COLS_IN_ALPHA_INDEX    = 2
-
-# In case all classes in a project start with a common prefix, all
-# classes will be put under the same header in the alphabetical index.
-# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
-# should be ignored while generating the index headers.
-
-IGNORE_PREFIX          = eet_ \
-                         _eet_ \
-                         Eet_ \
-                         _Eet_ \
-                         EET_ \
-                         _EET_
-
-#---------------------------------------------------------------------------
-# configuration options related to the HTML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
-# generate HTML output.
-
-GENERATE_HTML          = YES
-
-# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be
-# put in front of it. If left blank `html' will be used as the default path.
-
-HTML_OUTPUT            = html
-
-# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
-# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
-# doxygen will generate files with .html extension.
-
-HTML_FILE_EXTENSION    = .html
-
-# The HTML_HEADER tag can be used to specify a personal HTML header for
-# each generated HTML page. If it is left blank doxygen will generate a
-# standard header.
-
-HTML_HEADER            = ./head.html
-
-# The HTML_FOOTER tag can be used to specify a personal HTML footer for
-# each generated HTML page. If it is left blank doxygen will generate a
-# standard footer.
-
-HTML_FOOTER            = ./foot.html
-
-# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
-# style sheet that is used by each HTML page. It can be used to
-# fine-tune the look of the HTML output. If the tag is left blank doxygen
-# will generate a default style sheet. Note that doxygen will try to copy
-# the style sheet file to the HTML output directory, so don't put your own
-# stylesheet in the HTML output directory as well, or it will be erased!
-
-HTML_STYLESHEET        = ./e.css
-
-# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output.
-# Doxygen will adjust the colors in the stylesheet and background images
-# according to this color. Hue is specified as an angle on a colorwheel,
-# see http://en.wikipedia.org/wiki/Hue for more information.
-# For instance the value 0 represents red, 60 is yellow, 120 is green,
-# 180 is cyan, 240 is blue, 300 purple, and 360 is red again.
-# The allowed range is 0 to 359.
-
-HTML_COLORSTYLE_HUE    = 220
-
-# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of
-# the colors in the HTML output. For a value of 0 the output will use
-# grayscales only. A value of 255 will produce the most vivid colors.
-
-HTML_COLORSTYLE_SAT    = 100
-
-# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to
-# the luminance component of the colors in the HTML output. Values below
-# 100 gradually make the output lighter, whereas values above 100 make
-# the output darker. The value divided by 100 is the actual gamma applied,
-# so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2,
-# and 100 does not change the gamma.
-
-HTML_COLORSTYLE_GAMMA  = 80
-
-# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
-# page will contain the date and time when the page was generated. Setting
-# this to NO can help when comparing the output of multiple runs.
-
-HTML_TIMESTAMP         = YES
-
-# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
-# files or namespaces will be aligned in HTML using tables. If set to
-# NO a bullet list will be used.
-
-HTML_ALIGN_MEMBERS     = YES
-
-# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
-# documentation will contain sections that can be hidden and shown after the
-# page has loaded. For this to work a browser that supports
-# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
-# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
-
-HTML_DYNAMIC_SECTIONS  = YES
-
-# If the GENERATE_DOCSET tag is set to YES, additional index files
-# will be generated that can be used as input for Apple's Xcode 3
-# integrated development environment, introduced with OSX 10.5 (Leopard).
-# To create a documentation set, doxygen will generate a Makefile in the
-# HTML output directory. Running make will produce the docset in that
-# directory and running "make install" will install the docset in
-# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
-# it at startup.
-# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
-# for more information.
-
-GENERATE_DOCSET        = YES
-
-# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
-# feed. A documentation feed provides an umbrella under which multiple
-# documentation sets from a single provider (such as a company or product suite)
-# can be grouped.
-
-DOCSET_FEEDNAME        = "Doxygen generated docs"
-
-# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
-# should uniquely identify the documentation set bundle. This should be a
-# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
-# will append .docset to the name.
-
-DOCSET_BUNDLE_ID       = org.enlightenment.Eet
-
-# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify
-# the documentation publisher. This should be a reverse domain-name style
-# string, e.g. com.mycompany.MyDocSet.documentation.
-
-DOCSET_PUBLISHER_ID    = org.enlightenment.Eet
-
-# The GENERATE_PUBLISHER_NAME tag identifies the documentation publisher.
-
-DOCSET_PUBLISHER_NAME  = Enlightenment
-
-# If the GENERATE_HTMLHELP tag is set to YES, additional index files
-# will be generated that can be used as input for tools like the
-# Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
-# of the generated HTML documentation.
-
-GENERATE_HTMLHELP      = YES
-
-# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
-# be used to specify the file name of the resulting .chm file. You
-# can add a path in front of the file if the result should not be
-# written to the html output directory.
-
-CHM_FILE               =
-
-# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
-# be used to specify the location (absolute path including file name) of
-# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
-# the HTML help compiler on the generated index.hhp.
-
-HHC_LOCATION           =
-
-# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
-# controls if a separate .chi index file is generated (YES) or that
-# it should be included in the master .chm file (NO).
-
-GENERATE_CHI           = NO
-
-# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING
-# is used to encode HtmlHelp index (hhk), content (hhc) and project file
-# content.
-
-CHM_INDEX_ENCODING     =
-
-# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
-# controls whether a binary table of contents is generated (YES) or a
-# normal table of contents (NO) in the .chm file.
-
-BINARY_TOC             = NO
-
-# The TOC_EXPAND flag can be set to YES to add extra items for group members
-# to the contents of the HTML help documentation and to the tree view.
-
-TOC_EXPAND             = NO
-
-# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
-# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated
-# that can be used as input for Qt's qhelpgenerator to generate a
-# Qt Compressed Help (.qch) of the generated HTML documentation.
-
-GENERATE_QHP           = NO
-
-# If the QHG_LOCATION tag is specified, the QCH_FILE tag can
-# be used to specify the file name of the resulting .qch file.
-# The path specified is relative to the HTML output folder.
-
-QCH_FILE               =
-
-# The QHP_NAMESPACE tag specifies the namespace to use when generating
-# Qt Help Project output. For more information please see
-# http://doc.trolltech.com/qthelpproject.html#namespace
-
-QHP_NAMESPACE          = org.enlightenment.Eet
-
-# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating
-# Qt Help Project output. For more information please see
-# http://doc.trolltech.com/qthelpproject.html#virtual-folders
-
-QHP_VIRTUAL_FOLDER     = doc
-
-# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to
-# add. For more information please see
-# http://doc.trolltech.com/qthelpproject.html#custom-filters
-
-QHP_CUST_FILTER_NAME   =
-
-# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the
-# custom filter to add. For more information please see
-# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">
-# Qt Help Project / Custom Filters</a>.
-
-QHP_CUST_FILTER_ATTRS  =
-
-# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
-# project's
-# filter section matches.
-# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">
-# Qt Help Project / Filter Attributes</a>.
-
-QHP_SECT_FILTER_ATTRS  =
-
-# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can
-# be used to specify the location of Qt's qhelpgenerator.
-# If non-empty doxygen will try to run qhelpgenerator on the generated
-# .qhp file.
-
-QHG_LOCATION           =
-
-# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files
-#  will be generated, which together with the HTML files, form an Eclipse help
-# plugin. To install this plugin and make it available under the help contents
-# menu in Eclipse, the contents of the directory containing the HTML and XML
-# files needs to be copied into the plugins directory of eclipse. The name of
-# the directory within the plugins directory should be the same as
-# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before
-# the help appears.
-
-GENERATE_ECLIPSEHELP   = NO
-
-# A unique identifier for the eclipse help plugin. When installing the plugin
-# the directory name containing the HTML and XML files should also have
-# this name.
-
-ECLIPSE_DOC_ID         = org.enlightenment.Eet
-
-# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
-# top of each HTML page. The value NO (the default) enables the index and
-# the value YES disables it.
-
-DISABLE_INDEX          = YES
-
-# This tag can be used to set the number of enum values (range [0,1..20])
-# that doxygen will group on one line in the generated HTML documentation.
-# Note that a value of 0 will completely suppress the enum values from appearing in the overview section.
-
-ENUM_VALUES_PER_LINE   = 1
-
-# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
-# structure should be generated to display hierarchical information.
-# If the tag value is set to YES, a side panel will be generated
-# containing a tree-like index structure (just like the one that
-# is generated for HTML Help). For this to work a browser that supports
-# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser).
-# Windows users are probably better off using the HTML help feature.
-
-GENERATE_TREEVIEW      = NO
-
-# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
-# and Class Hierarchy pages using a tree view instead of an ordered list.
-
-USE_INLINE_TREES       = NO
-
-# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
-# used to set the initial width (in pixels) of the frame in which the tree
-# is shown.
-
-TREEVIEW_WIDTH         = 250
-
-# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open
-# links to external symbols imported via tag files in a separate window.
-
-EXT_LINKS_IN_WINDOW    = NO
-
-# Use this tag to change the font size of Latex formulas included
-# as images in the HTML documentation. The default is 10. Note that
-# when you change the font size after a successful doxygen run you need
-# to manually remove any form_*.png images from the HTML output directory
-# to force them to be regenerated.
-
-FORMULA_FONTSIZE       = 10
-
-# Use the FORMULA_TRANPARENT tag to determine whether or not the images
-# generated for formulas are transparent PNGs. Transparent PNGs are
-# not supported properly for IE 6.0, but are supported on all modern browsers.
-# Note that when changing this option you need to delete any form_*.png files
-# in the HTML output before the changes have effect.
-
-FORMULA_TRANSPARENT    = YES
-
-# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax
-# (see http://www.mathjax.org) which uses client side Javascript for the
-# rendering instead of using prerendered bitmaps. Use this if you do not
-# have LaTeX installed or if you want to formulas look prettier in the HTML
-# output. When enabled you also need to install MathJax separately and
-# configure the path to it using the MATHJAX_RELPATH option.
-
-USE_MATHJAX            = NO
-
-# When MathJax is enabled you need to specify the location relative to the
-# HTML output directory using the MATHJAX_RELPATH option. The destination
-# directory should contain the MathJax.js script. For instance, if the mathjax
-# directory is located at the same level as the HTML output directory, then
-# MATHJAX_RELPATH should be ../mathjax. The default value points to the mathjax.org site, so you can quickly see the result without installing
-# MathJax, but it is strongly recommended to install a local copy of MathJax
-# before deployment.
-
-MATHJAX_RELPATH        = http://www.mathjax.org/mathjax
-
-# When the SEARCHENGINE tag is enabled doxygen will generate a search box
-# for the HTML output. The underlying search engine uses javascript
-# and DHTML and should work on any modern browser. Note that when using
-# HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets
-# (GENERATE_DOCSET) there is already a search function so this one should
-# typically be disabled. For large projects the javascript based search engine
-# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution.
-
-SEARCHENGINE           = NO
-
-# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
-# implemented using a PHP enabled web server instead of at the web client
-# using Javascript. Doxygen will generate the search PHP script and index
-# file to put on the web server. The advantage of the server
-# based approach is that it scales better to large projects and allows
-# full text search. The disadvantages are that it is more difficult to setup
-# and does not have live searching capabilities.
-
-SERVER_BASED_SEARCH    = NO
-
-#---------------------------------------------------------------------------
-# configuration options related to the LaTeX output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
-# generate Latex output.
-
-GENERATE_LATEX         = YES
-
-# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be
-# put in front of it. If left blank `latex' will be used as the default path.
-
-LATEX_OUTPUT           = latex
-
-# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
-# invoked. If left blank `latex' will be used as the default command name.
-# Note that when enabling USE_PDFLATEX this option is only used for
-# generating bitmaps for formulas in the HTML output, but not in the
-# Makefile that is written to the output directory.
-
-LATEX_CMD_NAME         = latex
-
-# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
-# generate index for LaTeX. If left blank `makeindex' will be used as the
-# default command name.
-
-MAKEINDEX_CMD_NAME     = makeindex
-
-# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
-# LaTeX documents. This may be useful for small projects and may help to
-# save some trees in general.
-
-COMPACT_LATEX          = NO
-
-# The PAPER_TYPE tag can be used to set the paper type that is used
-# by the printer. Possible values are: a4, letter, legal and
-# executive. If left blank a4wide will be used.
-
-PAPER_TYPE             = a4wide
-
-# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
-# packages that should be included in the LaTeX output.
-
-EXTRA_PACKAGES         =
-
-# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
-# the generated latex document. The header should contain everything until
-# the first chapter. If it is left blank doxygen will generate a
-# standard header. Notice: only use this tag if you know what you are doing!
-
-LATEX_HEADER           =
-
-# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
-# is prepared for conversion to pdf (using ps2pdf). The pdf file will
-# contain links (just like the HTML output) instead of page references
-# This makes the output suitable for online browsing using a pdf viewer.
-
-PDF_HYPERLINKS         = YES
-
-# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
-# plain latex in the generated Makefile. Set this option to YES to get a
-# higher quality PDF documentation.
-
-USE_PDFLATEX           = YES
-
-# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
-# command to the generated LaTeX files. This will instruct LaTeX to keep
-# running if errors occur, instead of asking the user for help.
-# This option is also used when generating formulas in HTML.
-
-LATEX_BATCHMODE        = NO
-
-# If LATEX_HIDE_INDICES is set to YES then doxygen will not
-# include the index chapters (such as File Index, Compound Index, etc.)
-# in the output.
-
-LATEX_HIDE_INDICES     = NO
-
-# If LATEX_SOURCE_CODE is set to YES then doxygen will include
-# source code with syntax highlighting in the LaTeX output.
-# Note that which sources are shown also depends on other settings
-# such as SOURCE_BROWSER.
-
-LATEX_SOURCE_CODE      = NO
-
-#---------------------------------------------------------------------------
-# configuration options related to the RTF output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
-# The RTF output is optimized for Word 97 and may not look very pretty with
-# other RTF readers or editors.
-
-GENERATE_RTF           = NO
-
-# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be
-# put in front of it. If left blank `rtf' will be used as the default path.
-
-RTF_OUTPUT             = rtf
-
-# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
-# RTF documents. This may be useful for small projects and may help to
-# save some trees in general.
-
-COMPACT_RTF            = NO
-
-# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
-# will contain hyperlink fields. The RTF file will
-# contain links (just like the HTML output) instead of page references.
-# This makes the output suitable for online browsing using WORD or other
-# programs which support those fields.
-# Note: wordpad (write) and others do not support links.
-
-RTF_HYPERLINKS         = NO
-
-# Load stylesheet definitions from file. Syntax is similar to doxygen's
-# config file, i.e. a series of assignments. You only have to provide
-# replacements, missing definitions are set to their default value.
-
-RTF_STYLESHEET_FILE    =
-
-# Set optional variables used in the generation of an rtf document.
-# Syntax is similar to doxygen's config file.
-
-RTF_EXTENSIONS_FILE    =
-
-#---------------------------------------------------------------------------
-# configuration options related to the man page output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
-# generate man pages
-
-GENERATE_MAN           = NO
-
-# The MAN_OUTPUT tag is used to specify where the man pages will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be
-# put in front of it. If left blank `man' will be used as the default path.
-
-MAN_OUTPUT             = man
-
-# The MAN_EXTENSION tag determines the extension that is added to
-# the generated man pages (default is the subroutine's section .3)
-
-MAN_EXTENSION          = .3
-
-# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
-# then it will generate one additional man file for each entity
-# documented in the real man page(s). These additional files
-# only source the real man page, but without them the man command
-# would be unable to find the correct page. The default is NO.
-
-MAN_LINKS              = YES
-
-#---------------------------------------------------------------------------
-# configuration options related to the XML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_XML tag is set to YES Doxygen will
-# generate an XML file that captures the structure of
-# the code including all documentation.
-
-GENERATE_XML           = NO
-
-# The XML_OUTPUT tag is used to specify where the XML pages will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be
-# put in front of it. If left blank `xml' will be used as the default path.
-
-XML_OUTPUT             = xml
-
-# The XML_SCHEMA tag can be used to specify an XML schema,
-# which can be used by a validating XML parser to check the
-# syntax of the XML files.
-
-XML_SCHEMA             =
-
-# The XML_DTD tag can be used to specify an XML DTD,
-# which can be used by a validating XML parser to check the
-# syntax of the XML files.
-
-XML_DTD                =
-
-# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
-# dump the program listings (including syntax highlighting
-# and cross-referencing information) to the XML output. Note that
-# enabling this will significantly increase the size of the XML output.
-
-XML_PROGRAMLISTING     = YES
-
-#---------------------------------------------------------------------------
-# configuration options for the AutoGen Definitions output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
-# generate an AutoGen Definitions (see autogen.sf.net) file
-# that captures the structure of the code including all
-# documentation. Note that this feature is still experimental
-# and incomplete at the moment.
-
-GENERATE_AUTOGEN_DEF   = NO
-
-#---------------------------------------------------------------------------
-# configuration options related to the Perl module output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_PERLMOD tag is set to YES Doxygen will
-# generate a Perl module file that captures the structure of
-# the code including all documentation. Note that this
-# feature is still experimental and incomplete at the
-# moment.
-
-GENERATE_PERLMOD       = NO
-
-# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
-# the necessary Makefile rules, Perl scripts and LaTeX code to be able
-# to generate PDF and DVI output from the Perl module output.
-
-PERLMOD_LATEX          = NO
-
-# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
-# nicely formatted so it can be parsed by a human reader.
-# This is useful
-# if you want to understand what is going on.
-# On the other hand, if this
-# tag is set to NO the size of the Perl module output will be much smaller
-# and Perl will parse it just the same.
-
-PERLMOD_PRETTY         = YES
-
-# The names of the make variables in the generated doxyrules.make file
-# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
-# This is useful so different doxyrules.make files included by the same
-# Makefile don't overwrite each other's variables.
-
-PERLMOD_MAKEVAR_PREFIX =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the preprocessor
-#---------------------------------------------------------------------------
-
-# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
-# evaluate all C-preprocessor directives found in the sources and include
-# files.
-
-ENABLE_PREPROCESSING   = YES
-
-# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
-# names in the source code. If set to NO (the default) only conditional
-# compilation will be performed. Macro expansion can be done in a controlled
-# way by setting EXPAND_ONLY_PREDEF to YES.
-
-MACRO_EXPANSION        = YES
-
-# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
-# then the macro expansion is limited to the macros specified with the
-# PREDEFINED and EXPAND_AS_DEFINED tags.
-
-EXPAND_ONLY_PREDEF     = YES
-
-# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
-# in the INCLUDE_PATH (see below) will be search if a #include is found.
-
-SEARCH_INCLUDES        = NO
-
-# The INCLUDE_PATH tag can be used to specify one or more directories that
-# contain include files that are not input files but should be processed by
-# the preprocessor.
-
-INCLUDE_PATH           =
-
-# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
-# patterns (like *.h and *.hpp) to filter out the header-files in the
-# directories. If left blank, the patterns specified with FILE_PATTERNS will
-# be used.
-
-INCLUDE_FILE_PATTERNS  =
-
-# The PREDEFINED tag can be used to specify one or more macro names that
-# are defined before the preprocessor is started (similar to the -D option of
-# gcc). The argument of the tag is a list of macros of the form: name
-# or name=definition (no spaces). If the definition and the = are
-# omitted =1 is assumed. To prevent a macro definition from being
-# undefined via #undef or recursively expanded use the := operator
-# instead of the = operator.
-
-PREDEFINED             = EINA_MAGIC_DEBUG \
-                         __UNUSED__= \
-                         EINA_ARG_NONNULL()= \
-                         EINA_MALLOC= \
-                         EINA_WARN_UNUSED_RESULT= \
-                         EAPI= \
-                         EINA_PURE= \
-                         EINA_CONST=
-
-# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
-# this tag can be used to specify a list of macro names that should be expanded.
-# The macro definition that is found in the sources will be used.
-# Use the PREDEFINED tag if you want to use a different macro definition that overrules the definition found in the source code.
-
-EXPAND_AS_DEFINED      =
-
-# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
-# doxygen's preprocessor will remove all references to function-like macros
-# that are alone on a line, have an all uppercase name, and do not end with a
-# semicolon, because these will confuse the parser if not removed.
-
-SKIP_FUNCTION_MACROS   = YES
-
-#---------------------------------------------------------------------------
-# Configuration::additions related to external references
-#---------------------------------------------------------------------------
-
-# The TAGFILES option can be used to specify one or more tagfiles.
-# Optionally an initial location of the external documentation
-# can be added for each tagfile. The format of a tag file without
-# this location is as follows:
-#
-# TAGFILES = file1 file2 ...
-# Adding location for the tag files is done as follows:
-#
-# TAGFILES = file1=loc1 "file2 = loc2" ...
-# where "loc1" and "loc2" can be relative or absolute paths or
-# URLs. If a location is present for each tag, the installdox tool
-# does not have to be run to correct the links.
-# Note that each tag file must have a unique name
-# (where the name does NOT include the path)
-# If a tag file is not located in the directory in which doxygen
-# is run, you must also specify the path to the tagfile here.
-
-TAGFILES               =
-
-# When a file name is specified after GENERATE_TAGFILE, doxygen will create
-# a tag file that is based on the input files it reads.
-
-GENERATE_TAGFILE       =
-
-# If the ALLEXTERNALS tag is set to YES all external classes will be listed
-# in the class index. If set to NO only the inherited external classes
-# will be listed.
-
-ALLEXTERNALS           = NO
-
-# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
-# in the modules index. If set to NO, only the current project's groups will
-# be listed.
-
-EXTERNAL_GROUPS        = YES
-
-# The PERL_PATH should be the absolute path and name of the perl script
-# interpreter (i.e. the result of `which perl').
-
-PERL_PATH              = /usr/bin/perl
-
-#---------------------------------------------------------------------------
-# Configuration options related to the dot tool
-#---------------------------------------------------------------------------
-
-# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
-# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
-# or super classes. Setting the tag to NO turns the diagrams off. Note that
-# this option also works with HAVE_DOT disabled, but it is recommended to
-# install and use dot, since it yields more powerful graphs.
-
-CLASS_DIAGRAMS         = NO
-
-# You can define message sequence charts within doxygen comments using the \msc
-# command. Doxygen will then run the mscgen tool (see
-# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
-# documentation. The MSCGEN_PATH tag allows you to specify the directory where
-# the mscgen tool resides. If left empty the tool is assumed to be found in the
-# default search path.
-
-MSCGEN_PATH            =
-
-# If set to YES, the inheritance and collaboration graphs will hide
-# inheritance and usage relations if the target is undocumented
-# or is not a class.
-
-HIDE_UNDOC_RELATIONS   = YES
-
-# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
-# available from the path. This tool is part of Graphviz, a graph visualization
-# toolkit from AT&T and Lucent Bell Labs. The other options in this section
-# have no effect if this option is set to NO (the default)
-
-HAVE_DOT               = NO
-
-# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is
-# allowed to run in parallel. When set to 0 (the default) doxygen will
-# base this on the number of processors available in the system. You can set it
-# explicitly to a value larger than 0 to get control over the balance
-# between CPU load and processing speed.
-
-DOT_NUM_THREADS        = 0
-
-# By default doxygen will write a font called Helvetica to the output
-# directory and reference it in all dot files that doxygen generates.
-# When you want a differently looking font you can specify the font name
-# using DOT_FONTNAME. You need to make sure dot is able to find the font,
-# which can be done by putting it in a standard location or by setting the
-# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory
-# containing the font.
-
-DOT_FONTNAME           = Helvetica
-
-# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
-# The default size is 10pt.
-
-DOT_FONTSIZE           = 10
-
-# By default doxygen will tell dot to use the output directory to look for the
-# FreeSans.ttf font (which doxygen will put there itself). If you specify a
-# different font using DOT_FONTNAME you can set the path where dot
-# can find it using this tag.
-
-DOT_FONTPATH           =
-
-# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
-# will generate a graph for each documented class showing the direct and
-# indirect inheritance relations. Setting this tag to YES will force the
-# the CLASS_DIAGRAMS tag to NO.
-
-CLASS_GRAPH            = NO
-
-# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
-# will generate a graph for each documented class showing the direct and
-# indirect implementation dependencies (inheritance, containment, and
-# class references variables) of the class with other documented classes.
-
-COLLABORATION_GRAPH    = NO
-
-# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
-# will generate a graph for groups, showing the direct groups dependencies
-
-GROUP_GRAPHS           = YES
-
-# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
-# collaboration diagrams in a style similar to the OMG's Unified Modeling
-# Language.
-
-UML_LOOK               = NO
-
-# If set to YES, the inheritance and collaboration graphs will show the
-# relations between templates and their instances.
-
-TEMPLATE_RELATIONS     = NO
-
-# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
-# tags are set to YES then doxygen will generate a graph for each documented
-# file showing the direct and indirect include dependencies of the file with
-# other documented files.
-
-INCLUDE_GRAPH          = NO
-
-# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
-# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
-# documented header file showing the documented files that directly or
-# indirectly include this file.
-
-INCLUDED_BY_GRAPH      = NO
-
-# If the CALL_GRAPH and HAVE_DOT options are set to YES then
-# doxygen will generate a call dependency graph for every global function
-# or class method. Note that enabling this option will significantly increase
-# the time of a run. So in most cases it will be better to enable call graphs
-# for selected functions only using the \callgraph command.
-
-CALL_GRAPH             = NO
-
-# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
-# doxygen will generate a caller dependency graph for every global function
-# or class method. Note that enabling this option will significantly increase
-# the time of a run. So in most cases it will be better to enable caller
-# graphs for selected functions only using the \callergraph command.
-
-CALLER_GRAPH           = NO
-
-# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
-# will generate a graphical hierarchy of all classes instead of a textual one.
-
-GRAPHICAL_HIERARCHY    = NO
-
-# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
-# then doxygen will show the dependencies a directory has on other directories
-# in a graphical way. The dependency relations are determined by the #include
-# relations between the files in the directories.
-
-DIRECTORY_GRAPH        = YES
-
-# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
-# generated by dot. Possible values are png, svg, gif or svg.
-# If left blank png will be used.
-
-DOT_IMAGE_FORMAT       = png
-
-# The tag DOT_PATH can be used to specify the path where the dot tool can be
-# found. If left blank, it is assumed the dot tool can be found in the path.
-
-DOT_PATH               =
-
-# The DOTFILE_DIRS tag can be used to specify one or more directories that
-# contain dot files that are included in the documentation (see the
-# \dotfile command).
-
-DOTFILE_DIRS           =
-
-# The MSCFILE_DIRS tag can be used to specify one or more directories that
-# contain msc files that are included in the documentation (see the
-# \mscfile command).
-
-MSCFILE_DIRS           =
-
-# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
-# nodes that will be shown in the graph. If the number of nodes in a graph
-# becomes larger than this value, doxygen will truncate the graph, which is
-# visualized by representing a node as a red box. Note that doxygen if the
-# number of direct children of the root node in a graph is already larger than
-# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
-# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
-
-DOT_GRAPH_MAX_NODES    = 50
-
-# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
-# graphs generated by dot. A depth value of 3 means that only nodes reachable
-# from the root by following a path via at most 3 edges will be shown. Nodes
-# that lay further from the root node will be omitted. Note that setting this
-# option to 1 or 2 may greatly reduce the computation time needed for large
-# code bases. Also note that the size of a graph can be further restricted by
-# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
-
-MAX_DOT_GRAPH_DEPTH    = 0
-
-# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
-# background. This is disabled by default, because dot on Windows does not
-# seem to support this out of the box. Warning: Depending on the platform used,
-# enabling this option may lead to badly anti-aliased labels on the edges of
-# a graph (i.e. they become hard to read).
-
-DOT_TRANSPARENT        = YES
-
-# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
-# files in one run (i.e. multiple -o and -T options on the command line). This
-# makes dot run faster, but since only newer versions of dot (>1.8.10)
-# support this, this feature is disabled by default.
-
-DOT_MULTI_TARGETS      = NO
-
-# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
-# generate a legend page explaining the meaning of the various boxes and
-# arrows in the dot generated graphs.
-
-GENERATE_LEGEND        = YES
-
-# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
-# remove the intermediate dot files that are used to generate
-# the various graphs.
-
-DOT_CLEANUP            = YES
diff --git a/libraries/eet/doc/Doxyfile.in b/libraries/eet/doc/Doxyfile.in
deleted file mode 100644
index 8c427f8..0000000
--- a/libraries/eet/doc/Doxyfile.in
+++ /dev/null
@@ -1,1694 +0,0 @@
-# Doxyfile 1.7.3
-
-# This file describes the settings to be used by the documentation system
-# doxygen (www.doxygen.org) for a project.
-#
-# All text after a hash (#) is considered a comment and will be ignored.
-# The format is:
-#       TAG = value [value, ...]
-# For lists items can also be appended using:
-#       TAG += value [value, ...]
-# Values that contain spaces should be placed between quotes (" ").
-
-#---------------------------------------------------------------------------
-# Project related configuration options
-#---------------------------------------------------------------------------
-
-# This tag specifies the encoding used for all characters in the config file
-# that follow. The default is UTF-8 which is also the encoding used for all
-# text before the first occurrence of this tag. Doxygen uses libiconv (or the
-# iconv built into libc) for the transcoding. See
-# http://www.gnu.org/software/libiconv for the list of possible encodings.
-
-DOXYFILE_ENCODING      = UTF-8
-
-# The PROJECT_NAME tag is a single word (or a sequence of words surrounded
-# by quotes) that should identify the project.
-
-PROJECT_NAME           = Eet
-
-# The PROJECT_NUMBER tag can be used to enter a project or revision number.
-# This could be handy for archiving the generated documentation or
-# if some version control system is used.
-
-PROJECT_NUMBER         = @PACKAGE_VERSION@
-
-# Using the PROJECT_BRIEF tag one can provide an optional one line description for a project that appears at the top of each page and should give viewer a quick idea about the purpose of the project. Keep the description short.
-
-PROJECT_BRIEF          =
-
-# With the PROJECT_LOGO tag one can specify an logo or icon that is
-# included in the documentation. The maximum height of the logo should not
-# exceed 55 pixels and the maximum width should not exceed 200 pixels.
-# Doxygen will copy the logo to the output directory.
-
-PROJECT_LOGO           =
-
-# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
-# base path where the generated documentation will be put.
-# If a relative path is entered, it will be relative to the location
-# where doxygen was started. If left blank the current directory will be used.
-
-OUTPUT_DIRECTORY       = .
-
-# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
-# 4096 sub-directories (in 2 levels) under the output directory of each output
-# format and will distribute the generated files over these directories.
-# Enabling this option can be useful when feeding doxygen a huge amount of
-# source files, where putting all generated files in the same directory would
-# otherwise cause performance problems for the file system.
-
-CREATE_SUBDIRS         = NO
-
-# The OUTPUT_LANGUAGE tag is used to specify the language in which all
-# documentation generated by doxygen is written. Doxygen will use this
-# information to generate all constant output in the proper language.
-# The default language is English, other supported languages are:
-# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
-# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,
-# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English
-# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian,
-# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak,
-# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.
-
-OUTPUT_LANGUAGE        = English
-
-# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
-# include brief member descriptions after the members that are listed in
-# the file and class documentation (similar to JavaDoc).
-# Set to NO to disable this.
-
-BRIEF_MEMBER_DESC      = YES
-
-# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
-# the brief description of a member or function before the detailed description.
-# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
-# brief descriptions will be completely suppressed.
-
-REPEAT_BRIEF           = YES
-
-# This tag implements a quasi-intelligent brief description abbreviator
-# that is used to form the text in various listings. Each string
-# in this list, if found as the leading text of the brief description, will be
-# stripped from the text and the result after processing the whole list, is
-# used as the annotated text. Otherwise, the brief description is used as-is.
-# If left blank, the following values are used ("$name" is automatically
-# replaced with the name of the entity): "The $name class" "The $name widget"
-# "The $name file" "is" "provides" "specifies" "contains"
-# "represents" "a" "an" "the"
-
-ABBREVIATE_BRIEF       =
-
-# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
-# Doxygen will generate a detailed section even if there is only a brief
-# description.
-
-ALWAYS_DETAILED_SEC    = NO
-
-# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
-# inherited members of a class in the documentation of that class as if those
-# members were ordinary class members. Constructors, destructors and assignment
-# operators of the base classes will not be shown.
-
-INLINE_INHERITED_MEMB  = NO
-
-# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
-# path before files name in the file list and in the header files. If set
-# to NO the shortest path that makes the file name unique will be used.
-
-FULL_PATH_NAMES        = NO
-
-# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
-# can be used to strip a user-defined part of the path. Stripping is
-# only done if one of the specified strings matches the left-hand part of
-# the path. The tag can be used to show relative paths in the file list.
-# If left blank the directory from which doxygen is run is used as the
-# path to strip.
-
-STRIP_FROM_PATH        =
-
-# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
-# the path mentioned in the documentation of a class, which tells
-# the reader which header file to include in order to use a class.
-# If left blank only the name of the header file containing the class
-# definition is used. Otherwise one should specify the include paths that
-# are normally passed to the compiler using the -I flag.
-
-STRIP_FROM_INC_PATH    =
-
-# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
-# (but less readable) file names. This can be useful if your file system
-# doesn't support long names like on DOS, Mac, or CD-ROM.
-
-SHORT_NAMES            = NO
-
-# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
-# will interpret the first line (until the first dot) of a JavaDoc-style
-# comment as the brief description. If set to NO, the JavaDoc
-# comments will behave just like regular Qt-style comments
-# (thus requiring an explicit @brief command for a brief description.)
-
-JAVADOC_AUTOBRIEF      = YES
-
-# If the QT_AUTOBRIEF tag is set to YES then Doxygen will
-# interpret the first line (until the first dot) of a Qt-style
-# comment as the brief description. If set to NO, the comments
-# will behave just like regular Qt-style comments (thus requiring
-# an explicit \brief command for a brief description.)
-
-QT_AUTOBRIEF           = NO
-
-# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
-# treat a multi-line C++ special comment block (i.e. a block of //! or ///
-# comments) as a brief description. This used to be the default behaviour.
-# The new default is to treat a multi-line C++ comment block as a detailed
-# description. Set this tag to YES if you prefer the old behaviour instead.
-
-MULTILINE_CPP_IS_BRIEF = NO
-
-# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
-# member inherits the documentation from any documented member that it
-# re-implements.
-
-INHERIT_DOCS           = YES
-
-# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
-# a new page for each member. If set to NO, the documentation of a member will
-# be part of the file/class/namespace that contains it.
-
-SEPARATE_MEMBER_PAGES  = NO
-
-# The TAB_SIZE tag can be used to set the number of spaces in a tab.
-# Doxygen uses this value to replace tabs by spaces in code fragments.
-
-TAB_SIZE               = 8
-
-# This tag can be used to specify a number of aliases that acts
-# as commands in the documentation. An alias has the form "name=value".
-# For example adding "sideeffect=\par Side Effects:\n" will allow you to
-# put the command \sideeffect (or @sideeffect) in the documentation, which
-# will result in a user-defined paragraph with heading "Side Effects:".
-# You can put \n's in the value part of an alias to insert newlines.
-
-ALIASES                =
-
-# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
-# sources only. Doxygen will then generate output that is more tailored for C.
-# For instance, some of the names that are used will be different. The list
-# of all members will be omitted, etc.
-
-OPTIMIZE_OUTPUT_FOR_C  = YES
-
-# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
-# sources only. Doxygen will then generate output that is more tailored for
-# Java. For instance, namespaces will be presented as packages, qualified
-# scopes will look different, etc.
-
-OPTIMIZE_OUTPUT_JAVA   = NO
-
-# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
-# sources only. Doxygen will then generate output that is more tailored for
-# Fortran.
-
-OPTIMIZE_FOR_FORTRAN   = NO
-
-# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
-# sources. Doxygen will then generate output that is tailored for
-# VHDL.
-
-OPTIMIZE_OUTPUT_VHDL   = NO
-
-# Doxygen selects the parser to use depending on the extension of the files it
-# parses. With this tag you can assign which parser to use for a given extension.
-# Doxygen has a built-in mapping, but you can override or extend it using this
-# tag. The format is ext=language, where ext is a file extension, and language
-# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C,
-# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make
-# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C
-# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions
-# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen.
-
-EXTENSION_MAPPING      =
-
-# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
-# to include (a tag file for) the STL sources as input, then you should
-# set this tag to YES in order to let doxygen match functions declarations and
-# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
-# func(std::string) {}). This also makes the inheritance and collaboration
-# diagrams that involve STL classes more complete and accurate.
-
-BUILTIN_STL_SUPPORT    = NO
-
-# If you use Microsoft's C++/CLI language, you should set this option to YES to
-# enable parsing support.
-
-CPP_CLI_SUPPORT        = NO
-
-# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
-# Doxygen will parse them like normal C++ but will assume all classes use public
-# instead of private inheritance when no explicit protection keyword is present.
-
-SIP_SUPPORT            = NO
-
-# For Microsoft's IDL there are propget and propput attributes to indicate getter
-# and setter methods for a property. Setting this option to YES (the default)
-# will make doxygen replace the get and set methods by a property in the
-# documentation. This will only work if the methods are indeed getting or
-# setting a simple type. If this is not the case, or you want to show the
-# methods anyway, you should set this option to NO.
-
-IDL_PROPERTY_SUPPORT   = YES
-
-# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
-# tag is set to YES, then doxygen will reuse the documentation of the first
-# member in the group (if any) for the other members of the group. By default
-# all members of a group must be documented explicitly.
-
-DISTRIBUTE_GROUP_DOC   = NO
-
-# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
-# the same type (for instance a group of public functions) to be put as a
-# subgroup of that type (e.g. under the Public Functions section). Set it to
-# NO to prevent subgrouping. Alternatively, this can be done per class using
-# the \nosubgrouping command.
-
-SUBGROUPING            = YES
-
-# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
-# is documented as struct, union, or enum with the name of the typedef. So
-# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
-# with name TypeT. When disabled the typedef will appear as a member of a file,
-# namespace, or class. And the struct will be named TypeS. This can typically
-# be useful for C code in case the coding convention dictates that all compound
-# types are typedef'ed and only the typedef is referenced, never the tag name.
-
-TYPEDEF_HIDES_STRUCT   = NO
-
-# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to
-# determine which symbols to keep in memory and which to flush to disk.
-# When the cache is full, less often used symbols will be written to disk.
-# For small to medium size projects (<1000 input files) the default value is
-# probably good enough. For larger projects a too small cache size can cause
-# doxygen to be busy swapping symbols to and from disk most of the time
-# causing a significant performance penalty.
-# If the system has enough physical memory increasing the cache will improve the
-# performance by keeping more symbols in memory. Note that the value works on
-# a logarithmic scale so increasing the size by one will roughly double the
-# memory usage. The cache size is given by this formula:
-# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,
-# corresponding to a cache size of 2^16 = 65536 symbols
-
-SYMBOL_CACHE_SIZE      = 0
-
-#---------------------------------------------------------------------------
-# Build related configuration options
-#---------------------------------------------------------------------------
-
-# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
-# documentation are documented, even if no documentation was available.
-# Private class members and static file members will be hidden unless
-# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
-
-EXTRACT_ALL            = NO
-
-# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
-# will be included in the documentation.
-
-EXTRACT_PRIVATE        = NO
-
-# If the EXTRACT_STATIC tag is set to YES all static members of a file
-# will be included in the documentation.
-
-EXTRACT_STATIC         = NO
-
-# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
-# defined locally in source files will be included in the documentation.
-# If set to NO only classes defined in header files are included.
-
-EXTRACT_LOCAL_CLASSES  = NO
-
-# This flag is only useful for Objective-C code. When set to YES local
-# methods, which are defined in the implementation section but not in
-# the interface are included in the documentation.
-# If set to NO (the default) only methods in the interface are included.
-
-EXTRACT_LOCAL_METHODS  = NO
-
-# If this flag is set to YES, the members of anonymous namespaces will be
-# extracted and appear in the documentation as a namespace called
-# 'anonymous_namespace{file}', where file will be replaced with the base
-# name of the file that contains the anonymous namespace. By default
-# anonymous namespaces are hidden.
-
-EXTRACT_ANON_NSPACES   = NO
-
-# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
-# undocumented members of documented classes, files or namespaces.
-# If set to NO (the default) these members will be included in the
-# various overviews, but no documentation section is generated.
-# This option has no effect if EXTRACT_ALL is enabled.
-
-HIDE_UNDOC_MEMBERS     = NO
-
-# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
-# undocumented classes that are normally visible in the class hierarchy.
-# If set to NO (the default) these classes will be included in the various
-# overviews. This option has no effect if EXTRACT_ALL is enabled.
-
-HIDE_UNDOC_CLASSES     = NO
-
-# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
-# friend (class|struct|union) declarations.
-# If set to NO (the default) these declarations will be included in the
-# documentation.
-
-HIDE_FRIEND_COMPOUNDS  = NO
-
-# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
-# documentation blocks found inside the body of a function.
-# If set to NO (the default) these blocks will be appended to the
-# function's detailed documentation block.
-
-HIDE_IN_BODY_DOCS      = NO
-
-# The INTERNAL_DOCS tag determines if documentation
-# that is typed after a \internal command is included. If the tag is set
-# to NO (the default) then the documentation will be excluded.
-# Set it to YES to include the internal documentation.
-
-INTERNAL_DOCS          = NO
-
-# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
-# file names in lower-case letters. If set to YES upper-case letters are also
-# allowed. This is useful if you have classes or files whose names only differ
-# in case and if your file system supports case sensitive file names. Windows
-# and Mac users are advised to set this option to NO.
-
-CASE_SENSE_NAMES       = YES
-
-# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
-# will show members with their full class and namespace scopes in the
-# documentation. If set to YES the scope will be hidden.
-
-HIDE_SCOPE_NAMES       = NO
-
-# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
-# will put a list of the files that are included by a file in the documentation
-# of that file.
-
-SHOW_INCLUDE_FILES     = NO
-
-# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen
-# will list include files with double quotes in the documentation
-# rather than with sharp brackets.
-
-FORCE_LOCAL_INCLUDES   = NO
-
-# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
-# is inserted in the documentation for inline members.
-
-INLINE_INFO            = YES
-
-# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
-# will sort the (detailed) documentation of file and class members
-# alphabetically by member name. If set to NO the members will appear in
-# declaration order.
-
-SORT_MEMBER_DOCS       = NO
-
-# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
-# brief documentation of file, namespace and class members alphabetically
-# by member name. If set to NO (the default) the members will appear in
-# declaration order.
-
-SORT_BRIEF_DOCS        = NO
-
-# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen
-# will sort the (brief and detailed) documentation of class members so that
-# constructors and destructors are listed first. If set to NO (the default)
-# the constructors will appear in the respective orders defined by
-# SORT_MEMBER_DOCS and SORT_BRIEF_DOCS.
-# This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO
-# and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO.
-
-SORT_MEMBERS_CTORS_1ST = NO
-
-# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
-# hierarchy of group names into alphabetical order. If set to NO (the default)
-# the group names will appear in their defined order.
-
-SORT_GROUP_NAMES       = NO
-
-# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
-# sorted by fully-qualified names, including namespaces. If set to
-# NO (the default), the class list will be sorted only by class name,
-# not including the namespace part.
-# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
-# Note: This option applies only to the class list, not to the
-# alphabetical list.
-
-SORT_BY_SCOPE_NAME     = NO
-
-# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper type resolution of all parameters of a function it will reject a
-# match between the prototype and the implementation of a member function even if there is only one candidate or it is obvious which candidate to choose by doing a simple string match. By disabling STRICT_PROTO_MATCHING doxygen
-# will still accept a match between prototype and implementation in such cases.
-
-STRICT_PROTO_MATCHING  = NO
-
-# The GENERATE_TODOLIST tag can be used to enable (YES) or
-# disable (NO) the todo list. This list is created by putting \todo
-# commands in the documentation.
-
-GENERATE_TODOLIST      = YES
-
-# The GENERATE_TESTLIST tag can be used to enable (YES) or
-# disable (NO) the test list. This list is created by putting \test
-# commands in the documentation.
-
-GENERATE_TESTLIST      = YES
-
-# The GENERATE_BUGLIST tag can be used to enable (YES) or
-# disable (NO) the bug list. This list is created by putting \bug
-# commands in the documentation.
-
-GENERATE_BUGLIST       = YES
-
-# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
-# disable (NO) the deprecated list. This list is created by putting
-# \deprecated commands in the documentation.
-
-GENERATE_DEPRECATEDLIST= YES
-
-# The ENABLED_SECTIONS tag can be used to enable conditional
-# documentation sections, marked by \if sectionname ... \endif.
-
-ENABLED_SECTIONS       =
-
-# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
-# the initial value of a variable or macro consists of for it to appear in
-# the documentation. If the initializer consists of more lines than specified
-# here it will be hidden. Use a value of 0 to hide initializers completely.
-# The appearance of the initializer of individual variables and macros in the
-# documentation can be controlled using \showinitializer or \hideinitializer
-# command in the documentation regardless of this setting.
-
-MAX_INITIALIZER_LINES  = 30
-
-# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
-# at the bottom of the documentation of classes and structs. If set to YES the
-# list will mention the files that were used to generate the documentation.
-
-SHOW_USED_FILES        = NO
-
-# If the sources in your project are distributed over multiple directories
-# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
-# in the documentation. The default is NO.
-
-SHOW_DIRECTORIES       = NO
-
-# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
-# This will remove the Files entry from the Quick Index and from the
-# Folder Tree View (if specified). The default is YES.
-
-SHOW_FILES             = YES
-
-# Set the SHOW_NAMESPACES tag to NO to disable the generation of the
-# Namespaces page.
-# This will remove the Namespaces entry from the Quick Index
-# and from the Folder Tree View (if specified). The default is YES.
-
-SHOW_NAMESPACES        = YES
-
-# The FILE_VERSION_FILTER tag can be used to specify a program or script that
-# doxygen should invoke to get the current version for each file (typically from
-# the version control system). Doxygen will invoke the program by executing (via
-# popen()) the command <command> <input-file>, where <command> is the value of
-# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
-# provided by doxygen. Whatever the program writes to standard output
-# is used as the file version. See the manual for examples.
-
-FILE_VERSION_FILTER    =
-
-# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
-# by doxygen. The layout file controls the global structure of the generated
-# output files in an output format independent way. The create the layout file
-# that represents doxygen's defaults, run doxygen with the -l option.
-# You can optionally specify a file name after the option, if omitted
-# DoxygenLayout.xml will be used as the name of the layout file.
-
-LAYOUT_FILE            =
-
-#---------------------------------------------------------------------------
-# configuration options related to warning and progress messages
-#---------------------------------------------------------------------------
-
-# The QUIET tag can be used to turn on/off the messages that are generated
-# by doxygen. Possible values are YES and NO. If left blank NO is used.
-
-QUIET                  = NO
-
-# The WARNINGS tag can be used to turn on/off the warning messages that are
-# generated by doxygen. Possible values are YES and NO. If left blank
-# NO is used.
-
-WARNINGS               = YES
-
-# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
-# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
-# automatically be disabled.
-
-WARN_IF_UNDOCUMENTED   = YES
-
-# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
-# potential errors in the documentation, such as not documenting some
-# parameters in a documented function, or documenting parameters that
-# don't exist or using markup commands wrongly.
-
-WARN_IF_DOC_ERROR      = YES
-
-# The WARN_NO_PARAMDOC option can be enabled to get warnings for
-# functions that are documented, but have no documentation for their parameters
-# or return value. If set to NO (the default) doxygen will only warn about
-# wrong or incomplete parameter documentation, but not about the absence of
-# documentation.
-
-WARN_NO_PARAMDOC       = YES
-
-# The WARN_FORMAT tag determines the format of the warning messages that
-# doxygen can produce. The string should contain the $file, $line, and $text
-# tags, which will be replaced by the file and line number from which the
-# warning originated and the warning text. Optionally the format may contain
-# $version, which will be replaced by the version of the file (if it could
-# be obtained via FILE_VERSION_FILTER)
-
-WARN_FORMAT            = "$file:$line: $text"
-
-# The WARN_LOGFILE tag can be used to specify a file to which warning
-# and error messages should be written. If left blank the output is written
-# to stderr.
-
-WARN_LOGFILE           =
-
-#---------------------------------------------------------------------------
-# configuration options related to the input files
-#---------------------------------------------------------------------------
-
-# The INPUT tag can be used to specify the files and/or directories that contain
-# documented source files. You may enter file names like "myfile.cpp" or
-# directories like "/usr/src/myproject". Separate the files or directories
-# with spaces.
-
-INPUT                  = @builddir@/eet.dox \
-                         @srcdir@/examples.dox \
-                         @top_srcdir@/src/lib
-
-# This tag can be used to specify the character encoding of the source files
-# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
-# also the default input encoding. Doxygen uses libiconv (or the iconv built
-# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
-# the list of possible encodings.
-
-INPUT_ENCODING         = UTF-8
-
-# If the value of the INPUT tag contains directories, you can use the
-# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
-# and *.h) to filter out the source-files in the directories. If left
-# blank the following patterns are tested:
-# *.c *.cc *.cxx *.cpp *.c++ *.d *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh
-# *.hxx *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.dox *.py
-# *.f90 *.f *.for *.vhd *.vhdl
-
-FILE_PATTERNS          = *.c \
-                         *.h
-
-# The RECURSIVE tag can be used to turn specify whether or not subdirectories
-# should be searched for input files as well. Possible values are YES and NO.
-# If left blank NO is used.
-
-RECURSIVE              = YES
-
-# The EXCLUDE tag can be used to specify files and/or directories that should
-# excluded from the INPUT source files. This way you can easily exclude a
-# subdirectory from a directory tree whose root is specified with the INPUT tag.
-
-EXCLUDE                = @top_builddir@/src/lib/eet_amalgamation.c
-
-# The EXCLUDE_SYMLINKS tag can be used select whether or not files or
-# directories that are symbolic links (a Unix file system feature) are excluded
-# from the input.
-
-EXCLUDE_SYMLINKS       = NO
-
-# If the value of the INPUT tag contains directories, you can use the
-# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
-# certain files from those directories. Note that the wildcards are matched
-# against the file with absolute path, so to exclude all test directories
-# for example use the pattern */test/*
-
-EXCLUDE_PATTERNS       =
-
-# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
-# (namespaces, classes, functions, etc.) that should be excluded from the
-# output. The symbol name can be a fully qualified name, a word, or if the
-# wildcard * is used, a substring. Examples: ANamespace, AClass,
-# AClass::ANamespace, ANamespace::*Test
-
-EXCLUDE_SYMBOLS        =
-
-# The EXAMPLE_PATH tag can be used to specify one or more files or
-# directories that contain example code fragments that are included (see
-# the \include command).
-
-EXAMPLE_PATH           = @top_srcdir@/src/examples
-
-# If the value of the EXAMPLE_PATH tag contains directories, you can use the
-# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
-# and *.h) to filter out the source-files in the directories. If left
-# blank all files are included.
-
-EXAMPLE_PATTERNS       = *.c,*.h,*.x
-
-# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
-# searched for input files to be used with the \include or \dontinclude
-# commands irrespective of the value of the RECURSIVE tag.
-# Possible values are YES and NO. If left blank NO is used.
-
-EXAMPLE_RECURSIVE      = NO
-
-# The IMAGE_PATH tag can be used to specify one or more files or
-# directories that contain image that are included in the documentation (see
-# the \image command).
-
-IMAGE_PATH             = @top_srcdir@/doc/img
-
-# The INPUT_FILTER tag can be used to specify a program that doxygen should
-# invoke to filter for each input file. Doxygen will invoke the filter program
-# by executing (via popen()) the command <filter> <input-file>, where <filter>
-# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
-# input file. Doxygen will then use the output that the filter program writes
-# to standard output.
-# If FILTER_PATTERNS is specified, this tag will be
-# ignored.
-
-INPUT_FILTER           =
-
-# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
-# basis.
-# Doxygen will compare the file name with each pattern and apply the
-# filter if there is a match.
-# The filters are a list of the form:
-# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
-# info on how filters are used. If FILTER_PATTERNS is empty or if
-# non of the patterns match the file name, INPUT_FILTER is applied.
-
-FILTER_PATTERNS        =
-
-# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
-# INPUT_FILTER) will be used to filter the input files when producing source
-# files to browse (i.e. when SOURCE_BROWSER is set to YES).
-
-FILTER_SOURCE_FILES    = NO
-
-# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
-# pattern. A pattern will override the setting for FILTER_PATTERN (if any)
-# and it is also possible to disable source filtering for a specific pattern
-# using *.ext= (so without naming a filter). This option only has effect when
-# FILTER_SOURCE_FILES is enabled.
-
-FILTER_SOURCE_PATTERNS =
-
-#---------------------------------------------------------------------------
-# configuration options related to source browsing
-#---------------------------------------------------------------------------
-
-# If the SOURCE_BROWSER tag is set to YES then a list of source files will
-# be generated. Documented entities will be cross-referenced with these sources.
-# Note: To get rid of all source code in the generated output, make sure also
-# VERBATIM_HEADERS is set to NO.
-
-SOURCE_BROWSER         = NO
-
-# Setting the INLINE_SOURCES tag to YES will include the body
-# of functions and classes directly in the documentation.
-
-INLINE_SOURCES         = NO
-
-# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
-# doxygen to hide any special comment blocks from generated source code
-# fragments. Normal C and C++ comments will always remain visible.
-
-STRIP_CODE_COMMENTS    = YES
-
-# If the REFERENCED_BY_RELATION tag is set to YES
-# then for each documented function all documented
-# functions referencing it will be listed.
-
-REFERENCED_BY_RELATION = YES
-
-# If the REFERENCES_RELATION tag is set to YES
-# then for each documented function all documented entities
-# called/used by that function will be listed.
-
-REFERENCES_RELATION    = YES
-
-# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
-# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
-# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
-# link to the source code.
-# Otherwise they will link to the documentation.
-
-REFERENCES_LINK_SOURCE = YES
-
-# If the USE_HTAGS tag is set to YES then the references to source code
-# will point to the HTML generated by the htags(1) tool instead of doxygen
-# built-in source browser. The htags tool is part of GNU's global source
-# tagging system (see http://www.gnu.org/software/global/global.html). You
-# will need version 4.8.6 or higher.
-
-USE_HTAGS              = NO
-
-# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
-# will generate a verbatim copy of the header file for each class for
-# which an include is specified. Set to NO to disable this.
-
-VERBATIM_HEADERS       = NO
-
-#---------------------------------------------------------------------------
-# configuration options related to the alphabetical class index
-#---------------------------------------------------------------------------
-
-# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
-# of all compounds will be generated. Enable this if the project
-# contains a lot of classes, structs, unions or interfaces.
-
-ALPHABETICAL_INDEX     = YES
-
-# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
-# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
-# in which this list will be split (can be a number in the range [1..20])
-
-COLS_IN_ALPHA_INDEX    = 2
-
-# In case all classes in a project start with a common prefix, all
-# classes will be put under the same header in the alphabetical index.
-# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
-# should be ignored while generating the index headers.
-
-IGNORE_PREFIX          = eet_ \
-                         _eet_ \
-                         Eet_ \
-                         _Eet_ \
-                         EET_ \
-                         _EET_
-
-#---------------------------------------------------------------------------
-# configuration options related to the HTML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
-# generate HTML output.
-
-GENERATE_HTML          = YES
-
-# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be
-# put in front of it. If left blank `html' will be used as the default path.
-
-HTML_OUTPUT            = html
-
-# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
-# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
-# doxygen will generate files with .html extension.
-
-HTML_FILE_EXTENSION    = .html
-
-# The HTML_HEADER tag can be used to specify a personal HTML header for
-# each generated HTML page. If it is left blank doxygen will generate a
-# standard header.
-
-HTML_HEADER            = @srcdir@/head.html
-
-# The HTML_FOOTER tag can be used to specify a personal HTML footer for
-# each generated HTML page. If it is left blank doxygen will generate a
-# standard footer.
-
-HTML_FOOTER            = @srcdir@/foot.html
-
-# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
-# style sheet that is used by each HTML page. It can be used to
-# fine-tune the look of the HTML output. If the tag is left blank doxygen
-# will generate a default style sheet. Note that doxygen will try to copy
-# the style sheet file to the HTML output directory, so don't put your own
-# stylesheet in the HTML output directory as well, or it will be erased!
-
-HTML_STYLESHEET        = @srcdir@/e.css
-
-# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output.
-# Doxygen will adjust the colors in the stylesheet and background images
-# according to this color. Hue is specified as an angle on a colorwheel,
-# see http://en.wikipedia.org/wiki/Hue for more information.
-# For instance the value 0 represents red, 60 is yellow, 120 is green,
-# 180 is cyan, 240 is blue, 300 purple, and 360 is red again.
-# The allowed range is 0 to 359.
-
-HTML_COLORSTYLE_HUE    = 220
-
-# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of
-# the colors in the HTML output. For a value of 0 the output will use
-# grayscales only. A value of 255 will produce the most vivid colors.
-
-HTML_COLORSTYLE_SAT    = 100
-
-# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to
-# the luminance component of the colors in the HTML output. Values below
-# 100 gradually make the output lighter, whereas values above 100 make
-# the output darker. The value divided by 100 is the actual gamma applied,
-# so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2,
-# and 100 does not change the gamma.
-
-HTML_COLORSTYLE_GAMMA  = 80
-
-# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
-# page will contain the date and time when the page was generated. Setting
-# this to NO can help when comparing the output of multiple runs.
-
-HTML_TIMESTAMP         = YES
-
-# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
-# files or namespaces will be aligned in HTML using tables. If set to
-# NO a bullet list will be used.
-
-HTML_ALIGN_MEMBERS     = YES
-
-# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
-# documentation will contain sections that can be hidden and shown after the
-# page has loaded. For this to work a browser that supports
-# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
-# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
-
-HTML_DYNAMIC_SECTIONS  = YES
-
-# If the GENERATE_DOCSET tag is set to YES, additional index files
-# will be generated that can be used as input for Apple's Xcode 3
-# integrated development environment, introduced with OSX 10.5 (Leopard).
-# To create a documentation set, doxygen will generate a Makefile in the
-# HTML output directory. Running make will produce the docset in that
-# directory and running "make install" will install the docset in
-# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
-# it at startup.
-# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
-# for more information.
-
-GENERATE_DOCSET        = YES
-
-# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
-# feed. A documentation feed provides an umbrella under which multiple
-# documentation sets from a single provider (such as a company or product suite)
-# can be grouped.
-
-DOCSET_FEEDNAME        = "Doxygen generated docs"
-
-# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
-# should uniquely identify the documentation set bundle. This should be a
-# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
-# will append .docset to the name.
-
-DOCSET_BUNDLE_ID       = org.enlightenment.Eet
-
-# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify
-# the documentation publisher. This should be a reverse domain-name style
-# string, e.g. com.mycompany.MyDocSet.documentation.
-
-DOCSET_PUBLISHER_ID    = org.enlightenment.Eet
-
-# The GENERATE_PUBLISHER_NAME tag identifies the documentation publisher.
-
-DOCSET_PUBLISHER_NAME  = Enlightenment
-
-# If the GENERATE_HTMLHELP tag is set to YES, additional index files
-# will be generated that can be used as input for tools like the
-# Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
-# of the generated HTML documentation.
-
-GENERATE_HTMLHELP      = YES
-
-# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
-# be used to specify the file name of the resulting .chm file. You
-# can add a path in front of the file if the result should not be
-# written to the html output directory.
-
-CHM_FILE               =
-
-# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
-# be used to specify the location (absolute path including file name) of
-# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
-# the HTML help compiler on the generated index.hhp.
-
-HHC_LOCATION           =
-
-# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
-# controls if a separate .chi index file is generated (YES) or that
-# it should be included in the master .chm file (NO).
-
-GENERATE_CHI           = NO
-
-# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING
-# is used to encode HtmlHelp index (hhk), content (hhc) and project file
-# content.
-
-CHM_INDEX_ENCODING     =
-
-# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
-# controls whether a binary table of contents is generated (YES) or a
-# normal table of contents (NO) in the .chm file.
-
-BINARY_TOC             = NO
-
-# The TOC_EXPAND flag can be set to YES to add extra items for group members
-# to the contents of the HTML help documentation and to the tree view.
-
-TOC_EXPAND             = NO
-
-# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
-# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated
-# that can be used as input for Qt's qhelpgenerator to generate a
-# Qt Compressed Help (.qch) of the generated HTML documentation.
-
-GENERATE_QHP           = NO
-
-# If the QHG_LOCATION tag is specified, the QCH_FILE tag can
-# be used to specify the file name of the resulting .qch file.
-# The path specified is relative to the HTML output folder.
-
-QCH_FILE               =
-
-# The QHP_NAMESPACE tag specifies the namespace to use when generating
-# Qt Help Project output. For more information please see
-# http://doc.trolltech.com/qthelpproject.html#namespace
-
-QHP_NAMESPACE          = org.enlightenment.Eet
-
-# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating
-# Qt Help Project output. For more information please see
-# http://doc.trolltech.com/qthelpproject.html#virtual-folders
-
-QHP_VIRTUAL_FOLDER     = doc
-
-# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to
-# add. For more information please see
-# http://doc.trolltech.com/qthelpproject.html#custom-filters
-
-QHP_CUST_FILTER_NAME   =
-
-# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the
-# custom filter to add. For more information please see
-# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">
-# Qt Help Project / Custom Filters</a>.
-
-QHP_CUST_FILTER_ATTRS  =
-
-# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
-# project's
-# filter section matches.
-# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">
-# Qt Help Project / Filter Attributes</a>.
-
-QHP_SECT_FILTER_ATTRS  =
-
-# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can
-# be used to specify the location of Qt's qhelpgenerator.
-# If non-empty doxygen will try to run qhelpgenerator on the generated
-# .qhp file.
-
-QHG_LOCATION           =
-
-# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files
-#  will be generated, which together with the HTML files, form an Eclipse help
-# plugin. To install this plugin and make it available under the help contents
-# menu in Eclipse, the contents of the directory containing the HTML and XML
-# files needs to be copied into the plugins directory of eclipse. The name of
-# the directory within the plugins directory should be the same as
-# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before
-# the help appears.
-
-GENERATE_ECLIPSEHELP   = NO
-
-# A unique identifier for the eclipse help plugin. When installing the plugin
-# the directory name containing the HTML and XML files should also have
-# this name.
-
-ECLIPSE_DOC_ID         = org.enlightenment.Eet
-
-# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
-# top of each HTML page. The value NO (the default) enables the index and
-# the value YES disables it.
-
-DISABLE_INDEX          = YES
-
-# This tag can be used to set the number of enum values (range [0,1..20])
-# that doxygen will group on one line in the generated HTML documentation.
-# Note that a value of 0 will completely suppress the enum values from appearing in the overview section.
-
-ENUM_VALUES_PER_LINE   = 1
-
-# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
-# structure should be generated to display hierarchical information.
-# If the tag value is set to YES, a side panel will be generated
-# containing a tree-like index structure (just like the one that
-# is generated for HTML Help). For this to work a browser that supports
-# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser).
-# Windows users are probably better off using the HTML help feature.
-
-GENERATE_TREEVIEW      = NO
-
-# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
-# and Class Hierarchy pages using a tree view instead of an ordered list.
-
-USE_INLINE_TREES       = NO
-
-# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
-# used to set the initial width (in pixels) of the frame in which the tree
-# is shown.
-
-TREEVIEW_WIDTH         = 250
-
-# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open
-# links to external symbols imported via tag files in a separate window.
-
-EXT_LINKS_IN_WINDOW    = NO
-
-# Use this tag to change the font size of Latex formulas included
-# as images in the HTML documentation. The default is 10. Note that
-# when you change the font size after a successful doxygen run you need
-# to manually remove any form_*.png images from the HTML output directory
-# to force them to be regenerated.
-
-FORMULA_FONTSIZE       = 10
-
-# Use the FORMULA_TRANPARENT tag to determine whether or not the images
-# generated for formulas are transparent PNGs. Transparent PNGs are
-# not supported properly for IE 6.0, but are supported on all modern browsers.
-# Note that when changing this option you need to delete any form_*.png files
-# in the HTML output before the changes have effect.
-
-FORMULA_TRANSPARENT    = YES
-
-# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax
-# (see http://www.mathjax.org) which uses client side Javascript for the
-# rendering instead of using prerendered bitmaps. Use this if you do not
-# have LaTeX installed or if you want to formulas look prettier in the HTML
-# output. When enabled you also need to install MathJax separately and
-# configure the path to it using the MATHJAX_RELPATH option.
-
-USE_MATHJAX            = NO
-
-# When MathJax is enabled you need to specify the location relative to the
-# HTML output directory using the MATHJAX_RELPATH option. The destination
-# directory should contain the MathJax.js script. For instance, if the mathjax
-# directory is located at the same level as the HTML output directory, then
-# MATHJAX_RELPATH should be ../mathjax. The default value points to the mathjax.org site, so you can quickly see the result without installing
-# MathJax, but it is strongly recommended to install a local copy of MathJax
-# before deployment.
-
-MATHJAX_RELPATH        = http://www.mathjax.org/mathjax
-
-# When the SEARCHENGINE tag is enabled doxygen will generate a search box
-# for the HTML output. The underlying search engine uses javascript
-# and DHTML and should work on any modern browser. Note that when using
-# HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets
-# (GENERATE_DOCSET) there is already a search function so this one should
-# typically be disabled. For large projects the javascript based search engine
-# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution.
-
-SEARCHENGINE           = NO
-
-# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
-# implemented using a PHP enabled web server instead of at the web client
-# using Javascript. Doxygen will generate the search PHP script and index
-# file to put on the web server. The advantage of the server
-# based approach is that it scales better to large projects and allows
-# full text search. The disadvantages are that it is more difficult to setup
-# and does not have live searching capabilities.
-
-SERVER_BASED_SEARCH    = NO
-
-#---------------------------------------------------------------------------
-# configuration options related to the LaTeX output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
-# generate Latex output.
-
-GENERATE_LATEX         = YES
-
-# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be
-# put in front of it. If left blank `latex' will be used as the default path.
-
-LATEX_OUTPUT           = latex
-
-# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
-# invoked. If left blank `latex' will be used as the default command name.
-# Note that when enabling USE_PDFLATEX this option is only used for
-# generating bitmaps for formulas in the HTML output, but not in the
-# Makefile that is written to the output directory.
-
-LATEX_CMD_NAME         = latex
-
-# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
-# generate index for LaTeX. If left blank `makeindex' will be used as the
-# default command name.
-
-MAKEINDEX_CMD_NAME     = makeindex
-
-# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
-# LaTeX documents. This may be useful for small projects and may help to
-# save some trees in general.
-
-COMPACT_LATEX          = NO
-
-# The PAPER_TYPE tag can be used to set the paper type that is used
-# by the printer. Possible values are: a4, letter, legal and
-# executive. If left blank a4wide will be used.
-
-PAPER_TYPE             = a4wide
-
-# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
-# packages that should be included in the LaTeX output.
-
-EXTRA_PACKAGES         =
-
-# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
-# the generated latex document. The header should contain everything until
-# the first chapter. If it is left blank doxygen will generate a
-# standard header. Notice: only use this tag if you know what you are doing!
-
-LATEX_HEADER           =
-
-# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
-# is prepared for conversion to pdf (using ps2pdf). The pdf file will
-# contain links (just like the HTML output) instead of page references
-# This makes the output suitable for online browsing using a pdf viewer.
-
-PDF_HYPERLINKS         = YES
-
-# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
-# plain latex in the generated Makefile. Set this option to YES to get a
-# higher quality PDF documentation.
-
-USE_PDFLATEX           = YES
-
-# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
-# command to the generated LaTeX files. This will instruct LaTeX to keep
-# running if errors occur, instead of asking the user for help.
-# This option is also used when generating formulas in HTML.
-
-LATEX_BATCHMODE        = NO
-
-# If LATEX_HIDE_INDICES is set to YES then doxygen will not
-# include the index chapters (such as File Index, Compound Index, etc.)
-# in the output.
-
-LATEX_HIDE_INDICES     = NO
-
-# If LATEX_SOURCE_CODE is set to YES then doxygen will include
-# source code with syntax highlighting in the LaTeX output.
-# Note that which sources are shown also depends on other settings
-# such as SOURCE_BROWSER.
-
-LATEX_SOURCE_CODE      = NO
-
-#---------------------------------------------------------------------------
-# configuration options related to the RTF output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
-# The RTF output is optimized for Word 97 and may not look very pretty with
-# other RTF readers or editors.
-
-GENERATE_RTF           = NO
-
-# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be
-# put in front of it. If left blank `rtf' will be used as the default path.
-
-RTF_OUTPUT             = rtf
-
-# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
-# RTF documents. This may be useful for small projects and may help to
-# save some trees in general.
-
-COMPACT_RTF            = NO
-
-# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
-# will contain hyperlink fields. The RTF file will
-# contain links (just like the HTML output) instead of page references.
-# This makes the output suitable for online browsing using WORD or other
-# programs which support those fields.
-# Note: wordpad (write) and others do not support links.
-
-RTF_HYPERLINKS         = NO
-
-# Load stylesheet definitions from file. Syntax is similar to doxygen's
-# config file, i.e. a series of assignments. You only have to provide
-# replacements, missing definitions are set to their default value.
-
-RTF_STYLESHEET_FILE    =
-
-# Set optional variables used in the generation of an rtf document.
-# Syntax is similar to doxygen's config file.
-
-RTF_EXTENSIONS_FILE    =
-
-#---------------------------------------------------------------------------
-# configuration options related to the man page output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
-# generate man pages
-
-GENERATE_MAN           = NO
-
-# The MAN_OUTPUT tag is used to specify where the man pages will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be
-# put in front of it. If left blank `man' will be used as the default path.
-
-MAN_OUTPUT             = man
-
-# The MAN_EXTENSION tag determines the extension that is added to
-# the generated man pages (default is the subroutine's section .3)
-
-MAN_EXTENSION          = .3
-
-# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
-# then it will generate one additional man file for each entity
-# documented in the real man page(s). These additional files
-# only source the real man page, but without them the man command
-# would be unable to find the correct page. The default is NO.
-
-MAN_LINKS              = YES
-
-#---------------------------------------------------------------------------
-# configuration options related to the XML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_XML tag is set to YES Doxygen will
-# generate an XML file that captures the structure of
-# the code including all documentation.
-
-GENERATE_XML           = NO
-
-# The XML_OUTPUT tag is used to specify where the XML pages will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be
-# put in front of it. If left blank `xml' will be used as the default path.
-
-XML_OUTPUT             = xml
-
-# The XML_SCHEMA tag can be used to specify an XML schema,
-# which can be used by a validating XML parser to check the
-# syntax of the XML files.
-
-XML_SCHEMA             =
-
-# The XML_DTD tag can be used to specify an XML DTD,
-# which can be used by a validating XML parser to check the
-# syntax of the XML files.
-
-XML_DTD                =
-
-# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
-# dump the program listings (including syntax highlighting
-# and cross-referencing information) to the XML output. Note that
-# enabling this will significantly increase the size of the XML output.
-
-XML_PROGRAMLISTING     = YES
-
-#---------------------------------------------------------------------------
-# configuration options for the AutoGen Definitions output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
-# generate an AutoGen Definitions (see autogen.sf.net) file
-# that captures the structure of the code including all
-# documentation. Note that this feature is still experimental
-# and incomplete at the moment.
-
-GENERATE_AUTOGEN_DEF   = NO
-
-#---------------------------------------------------------------------------
-# configuration options related to the Perl module output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_PERLMOD tag is set to YES Doxygen will
-# generate a Perl module file that captures the structure of
-# the code including all documentation. Note that this
-# feature is still experimental and incomplete at the
-# moment.
-
-GENERATE_PERLMOD       = NO
-
-# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
-# the necessary Makefile rules, Perl scripts and LaTeX code to be able
-# to generate PDF and DVI output from the Perl module output.
-
-PERLMOD_LATEX          = NO
-
-# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
-# nicely formatted so it can be parsed by a human reader.
-# This is useful
-# if you want to understand what is going on.
-# On the other hand, if this
-# tag is set to NO the size of the Perl module output will be much smaller
-# and Perl will parse it just the same.
-
-PERLMOD_PRETTY         = YES
-
-# The names of the make variables in the generated doxyrules.make file
-# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
-# This is useful so different doxyrules.make files included by the same
-# Makefile don't overwrite each other's variables.
-
-PERLMOD_MAKEVAR_PREFIX =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the preprocessor
-#---------------------------------------------------------------------------
-
-# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
-# evaluate all C-preprocessor directives found in the sources and include
-# files.
-
-ENABLE_PREPROCESSING   = YES
-
-# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
-# names in the source code. If set to NO (the default) only conditional
-# compilation will be performed. Macro expansion can be done in a controlled
-# way by setting EXPAND_ONLY_PREDEF to YES.
-
-MACRO_EXPANSION        = YES
-
-# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
-# then the macro expansion is limited to the macros specified with the
-# PREDEFINED and EXPAND_AS_DEFINED tags.
-
-EXPAND_ONLY_PREDEF     = YES
-
-# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
-# in the INCLUDE_PATH (see below) will be search if a #include is found.
-
-SEARCH_INCLUDES        = NO
-
-# The INCLUDE_PATH tag can be used to specify one or more directories that
-# contain include files that are not input files but should be processed by
-# the preprocessor.
-
-INCLUDE_PATH           =
-
-# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
-# patterns (like *.h and *.hpp) to filter out the header-files in the
-# directories. If left blank, the patterns specified with FILE_PATTERNS will
-# be used.
-
-INCLUDE_FILE_PATTERNS  =
-
-# The PREDEFINED tag can be used to specify one or more macro names that
-# are defined before the preprocessor is started (similar to the -D option of
-# gcc). The argument of the tag is a list of macros of the form: name
-# or name=definition (no spaces). If the definition and the = are
-# omitted =1 is assumed. To prevent a macro definition from being
-# undefined via #undef or recursively expanded use the := operator
-# instead of the = operator.
-
-PREDEFINED             = EINA_MAGIC_DEBUG \
-                         __UNUSED__= \
-                         EINA_ARG_NONNULL()= \
-                         EINA_MALLOC= \
-                         EINA_WARN_UNUSED_RESULT= \
-                         EAPI= \
-                         EINA_PURE= \
-                         EINA_CONST=
-
-# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
-# this tag can be used to specify a list of macro names that should be expanded.
-# The macro definition that is found in the sources will be used.
-# Use the PREDEFINED tag if you want to use a different macro definition that overrules the definition found in the source code.
-
-EXPAND_AS_DEFINED      =
-
-# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
-# doxygen's preprocessor will remove all references to function-like macros
-# that are alone on a line, have an all uppercase name, and do not end with a
-# semicolon, because these will confuse the parser if not removed.
-
-SKIP_FUNCTION_MACROS   = YES
-
-#---------------------------------------------------------------------------
-# Configuration::additions related to external references
-#---------------------------------------------------------------------------
-
-# The TAGFILES option can be used to specify one or more tagfiles.
-# Optionally an initial location of the external documentation
-# can be added for each tagfile. The format of a tag file without
-# this location is as follows:
-#
-# TAGFILES = file1 file2 ...
-# Adding location for the tag files is done as follows:
-#
-# TAGFILES = file1=loc1 "file2 = loc2" ...
-# where "loc1" and "loc2" can be relative or absolute paths or
-# URLs. If a location is present for each tag, the installdox tool
-# does not have to be run to correct the links.
-# Note that each tag file must have a unique name
-# (where the name does NOT include the path)
-# If a tag file is not located in the directory in which doxygen
-# is run, you must also specify the path to the tagfile here.
-
-TAGFILES               =
-
-# When a file name is specified after GENERATE_TAGFILE, doxygen will create
-# a tag file that is based on the input files it reads.
-
-GENERATE_TAGFILE       =
-
-# If the ALLEXTERNALS tag is set to YES all external classes will be listed
-# in the class index. If set to NO only the inherited external classes
-# will be listed.
-
-ALLEXTERNALS           = NO
-
-# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
-# in the modules index. If set to NO, only the current project's groups will
-# be listed.
-
-EXTERNAL_GROUPS        = YES
-
-# The PERL_PATH should be the absolute path and name of the perl script
-# interpreter (i.e. the result of `which perl').
-
-PERL_PATH              = /usr/bin/perl
-
-#---------------------------------------------------------------------------
-# Configuration options related to the dot tool
-#---------------------------------------------------------------------------
-
-# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
-# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
-# or super classes. Setting the tag to NO turns the diagrams off. Note that
-# this option also works with HAVE_DOT disabled, but it is recommended to
-# install and use dot, since it yields more powerful graphs.
-
-CLASS_DIAGRAMS         = NO
-
-# You can define message sequence charts within doxygen comments using the \msc
-# command. Doxygen will then run the mscgen tool (see
-# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
-# documentation. The MSCGEN_PATH tag allows you to specify the directory where
-# the mscgen tool resides. If left empty the tool is assumed to be found in the
-# default search path.
-
-MSCGEN_PATH            =
-
-# If set to YES, the inheritance and collaboration graphs will hide
-# inheritance and usage relations if the target is undocumented
-# or is not a class.
-
-HIDE_UNDOC_RELATIONS   = YES
-
-# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
-# available from the path. This tool is part of Graphviz, a graph visualization
-# toolkit from AT&T and Lucent Bell Labs. The other options in this section
-# have no effect if this option is set to NO (the default)
-
-HAVE_DOT               = NO
-
-# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is
-# allowed to run in parallel. When set to 0 (the default) doxygen will
-# base this on the number of processors available in the system. You can set it
-# explicitly to a value larger than 0 to get control over the balance
-# between CPU load and processing speed.
-
-DOT_NUM_THREADS        = 0
-
-# By default doxygen will write a font called Helvetica to the output
-# directory and reference it in all dot files that doxygen generates.
-# When you want a differently looking font you can specify the font name
-# using DOT_FONTNAME. You need to make sure dot is able to find the font,
-# which can be done by putting it in a standard location or by setting the
-# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory
-# containing the font.
-
-DOT_FONTNAME           = Helvetica
-
-# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
-# The default size is 10pt.
-
-DOT_FONTSIZE           = 10
-
-# By default doxygen will tell dot to use the output directory to look for the
-# FreeSans.ttf font (which doxygen will put there itself). If you specify a
-# different font using DOT_FONTNAME you can set the path where dot
-# can find it using this tag.
-
-DOT_FONTPATH           =
-
-# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
-# will generate a graph for each documented class showing the direct and
-# indirect inheritance relations. Setting this tag to YES will force the
-# the CLASS_DIAGRAMS tag to NO.
-
-CLASS_GRAPH            = NO
-
-# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
-# will generate a graph for each documented class showing the direct and
-# indirect implementation dependencies (inheritance, containment, and
-# class references variables) of the class with other documented classes.
-
-COLLABORATION_GRAPH    = NO
-
-# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
-# will generate a graph for groups, showing the direct groups dependencies
-
-GROUP_GRAPHS           = YES
-
-# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
-# collaboration diagrams in a style similar to the OMG's Unified Modeling
-# Language.
-
-UML_LOOK               = NO
-
-# If set to YES, the inheritance and collaboration graphs will show the
-# relations between templates and their instances.
-
-TEMPLATE_RELATIONS     = NO
-
-# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
-# tags are set to YES then doxygen will generate a graph for each documented
-# file showing the direct and indirect include dependencies of the file with
-# other documented files.
-
-INCLUDE_GRAPH          = NO
-
-# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
-# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
-# documented header file showing the documented files that directly or
-# indirectly include this file.
-
-INCLUDED_BY_GRAPH      = NO
-
-# If the CALL_GRAPH and HAVE_DOT options are set to YES then
-# doxygen will generate a call dependency graph for every global function
-# or class method. Note that enabling this option will significantly increase
-# the time of a run. So in most cases it will be better to enable call graphs
-# for selected functions only using the \callgraph command.
-
-CALL_GRAPH             = NO
-
-# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
-# doxygen will generate a caller dependency graph for every global function
-# or class method. Note that enabling this option will significantly increase
-# the time of a run. So in most cases it will be better to enable caller
-# graphs for selected functions only using the \callergraph command.
-
-CALLER_GRAPH           = NO
-
-# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
-# will generate a graphical hierarchy of all classes instead of a textual one.
-
-GRAPHICAL_HIERARCHY    = NO
-
-# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
-# then doxygen will show the dependencies a directory has on other directories
-# in a graphical way. The dependency relations are determined by the #include
-# relations between the files in the directories.
-
-DIRECTORY_GRAPH        = YES
-
-# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
-# generated by dot. Possible values are png, svg, gif or svg.
-# If left blank png will be used.
-
-DOT_IMAGE_FORMAT       = png
-
-# The tag DOT_PATH can be used to specify the path where the dot tool can be
-# found. If left blank, it is assumed the dot tool can be found in the path.
-
-DOT_PATH               =
-
-# The DOTFILE_DIRS tag can be used to specify one or more directories that
-# contain dot files that are included in the documentation (see the
-# \dotfile command).
-
-DOTFILE_DIRS           =
-
-# The MSCFILE_DIRS tag can be used to specify one or more directories that
-# contain msc files that are included in the documentation (see the
-# \mscfile command).
-
-MSCFILE_DIRS           =
-
-# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
-# nodes that will be shown in the graph. If the number of nodes in a graph
-# becomes larger than this value, doxygen will truncate the graph, which is
-# visualized by representing a node as a red box. Note that doxygen if the
-# number of direct children of the root node in a graph is already larger than
-# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
-# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
-
-DOT_GRAPH_MAX_NODES    = 50
-
-# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
-# graphs generated by dot. A depth value of 3 means that only nodes reachable
-# from the root by following a path via at most 3 edges will be shown. Nodes
-# that lay further from the root node will be omitted. Note that setting this
-# option to 1 or 2 may greatly reduce the computation time needed for large
-# code bases. Also note that the size of a graph can be further restricted by
-# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
-
-MAX_DOT_GRAPH_DEPTH    = 0
-
-# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
-# background. This is disabled by default, because dot on Windows does not
-# seem to support this out of the box. Warning: Depending on the platform used,
-# enabling this option may lead to badly anti-aliased labels on the edges of
-# a graph (i.e. they become hard to read).
-
-DOT_TRANSPARENT        = YES
-
-# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
-# files in one run (i.e. multiple -o and -T options on the command line). This
-# makes dot run faster, but since only newer versions of dot (>1.8.10)
-# support this, this feature is disabled by default.
-
-DOT_MULTI_TARGETS      = NO
-
-# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
-# generate a legend page explaining the meaning of the various boxes and
-# arrows in the dot generated graphs.
-
-GENERATE_LEGEND        = YES
-
-# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
-# remove the intermediate dot files that are used to generate
-# the various graphs.
-
-DOT_CLEANUP            = YES
diff --git a/libraries/eet/doc/Makefile.am b/libraries/eet/doc/Makefile.am
deleted file mode 100644
index 4eeb438..0000000
--- a/libraries/eet/doc/Makefile.am
+++ /dev/null
@@ -1,40 +0,0 @@
-
-MAINTAINERCLEANFILES = Makefile.in eet.dox
-
-.PHONY: doc
-
-PACKAGE_DOCNAME = $(PACKAGE_TARNAME)-$(PACKAGE_VERSION)-doc
-
-if EFL_BUILD_DOC
-
-doc-clean:
-        rm -rf html/ latex/ xml/ $(PACKAGE_DOCNAME).tar*
-
-doc: doc-clean
-        $(efl_doxygen)
-        cp $(srcdir)/img/* html/
-        rm -rf $(PACKAGE_DOCNAME).tar*
-        mkdir -p $(PACKAGE_DOCNAME)/doc
-        cp -R html/ latex/ $(PACKAGE_DOCNAME)/doc
-        tar cf $(PACKAGE_DOCNAME).tar $(PACKAGE_DOCNAME)/
-        bzip2 -9 $(PACKAGE_DOCNAME).tar
-        rm -rf $(PACKAGE_DOCNAME)/
-        mv $(PACKAGE_DOCNAME).tar.bz2 $(top_builddir)
-        @echo "Documentation Package: $(PACKAGE_DOCNAME).tar.bz2"
-        @echo "Documentation HTML: doc/html"
-
-clean-local: doc-clean
-
-else
-
-doc:
-        @echo "Documentation not built. Run ./configure --help"
-
-endif
-
-EXTRA_DIST = $(builddir)/Doxyfile \
-        $(srcdir)/e.css \
-        $(srcdir)/foot.html \
-        $(srcdir)/head.html \
-        $(wildcard $(srcdir)/img/*.*) \
-        $(srcdir)/eet.dox.in
diff --git a/libraries/eet/doc/Makefile.in b/libraries/eet/doc/Makefile.in
deleted file mode 100644
index 25de7ec..0000000
--- a/libraries/eet/doc/Makefile.in
+++ /dev/null
@@ -1,443 +0,0 @@
-# Makefile.in generated by automake 1.11.1 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
-# Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-VPATH = @srcdir@
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-subdir = doc
-DIST_COMMON = $(srcdir)/Doxyfile.in $(srcdir)/Makefile.am \
-        $(srcdir)/Makefile.in $(srcdir)/eet.dox.in
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/ac_attribute.m4 \
-        $(top_srcdir)/m4/ac_path_generic.m4 \
-        $(top_srcdir)/m4/efl_binary.m4 \
-        $(top_srcdir)/m4/efl_compiler_flag.m4 \
-        $(top_srcdir)/m4/efl_coverage.m4 \
-        $(top_srcdir)/m4/efl_doxygen.m4 \
-        $(top_srcdir)/m4/efl_fnmatch.m4 \
-        $(top_srcdir)/m4/efl_path_max.m4 $(top_srcdir)/m4/efl_tests.m4 \
-        $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
-        $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
-        $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-        $(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/config.h
-CONFIG_CLEAN_FILES = Doxyfile eet.dox
-CONFIG_CLEAN_VPATH_FILES =
-AM_V_GEN = $(am__v_GEN_$(V))
-am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
-am__v_GEN_0 = @echo "  GEN   " $@;
-AM_V_at = $(am__v_at_$(V))
-am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
-am__v_at_0 = @
-SOURCES =
-DIST_SOURCES =
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-ALLOCA = @ALLOCA@
-AMTAR = @AMTAR@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AR = @AR@
-AS = @AS@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CHECK_CFLAGS = @CHECK_CFLAGS@
-CHECK_LIBS = @CHECK_LIBS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEBUG_CFLAGS = @DEBUG_CFLAGS@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DLLTOOL = @DLLTOOL@
-DSYMUTIL = @DSYMUTIL@
-DUMPBIN = @DUMPBIN@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EET_CFLAGS = @EET_CFLAGS@
-EET_CPPFLAGS = @EET_CPPFLAGS@
-EET_LIBS = @EET_LIBS@
-EET_PRG = @EET_PRG@
-EFL_COVERAGE_CFLAGS = @EFL_COVERAGE_CFLAGS@
-EFL_COVERAGE_LIBS = @EFL_COVERAGE_LIBS@
-EFL_EET_BUILD = @EFL_EET_BUILD@
-EFL_FNMATCH_LIBS = @EFL_FNMATCH_LIBS@
-EGREP = @EGREP@
-EINA_CFLAGS = @EINA_CFLAGS@
-EINA_LIBS = @EINA_LIBS@
-EVIL_CFLAGS = @EVIL_CFLAGS@
-EVIL_LIBS = @EVIL_LIBS@
-EXEEXT = @EXEEXT@
-EXOTIC_CFLAGS = @EXOTIC_CFLAGS@
-EXOTIC_LIBS = @EXOTIC_LIBS@
-FGREP = @FGREP@
-GNUTLS_CFLAGS = @GNUTLS_CFLAGS@
-GNUTLS_LIBS = @GNUTLS_LIBS@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-LD = @LD@
-LDFLAGS = @LDFLAGS@
-LIBGCRYPT_CFLAGS = @LIBGCRYPT_CFLAGS@
-LIBGCRYPT_CONFIG = @LIBGCRYPT_CONFIG@
-LIBGCRYPT_LIBS = @LIBGCRYPT_LIBS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LIPO = @LIPO@
-LN_S = @LN_S@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-MKDIR_P = @MKDIR_P@
-NM = @NM@
-NMEDIT = @NMEDIT@
-OBJDUMP = @OBJDUMP@
-OBJEXT = @OBJEXT@
-OPENSSL_CFLAGS = @OPENSSL_CFLAGS@
-OPENSSL_LIBS = @OPENSSL_LIBS@
-OTOOL = @OTOOL@
-OTOOL64 = @OTOOL64@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-PKG_CONFIG = @PKG_CONFIG@
-PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
-PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
-RANLIB = @RANLIB@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-STRIP = @STRIP@
-VERSION = @VERSION@
-VMAJ = @VMAJ@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-efl_doxygen = @efl_doxygen@
-efl_have_doxygen = @efl_have_doxygen@
-exec_prefix = @exec_prefix@
-have_lcov = @have_lcov@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-lt_ECHO = @lt_ECHO@
-lt_enable_auto_import = @lt_enable_auto_import@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-pkgconfig_requires_private = @pkgconfig_requires_private@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-release_info = @release_info@
-requirement_eet = @requirement_eet@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-version_info = @version_info@
-MAINTAINERCLEANFILES = Makefile.in eet.dox
-PACKAGE_DOCNAME = $(PACKAGE_TARNAME)-$(PACKAGE_VERSION)-doc
-EXTRA_DIST = $(builddir)/Doxyfile \
-        $(srcdir)/e.css \
-        $(srcdir)/foot.html \
-        $(srcdir)/head.html \
-        $(wildcard $(srcdir)/img/*.*) \
-        $(srcdir)/eet.dox.in
-
-all: all-am
-
-.SUFFIXES:
-$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
-        @for dep in $?; do \
-          case '$(am__configure_deps)' in \
-            *$$dep*) \
-              ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
-                && { if test -f $@; then exit 0; else break; fi; }; \
-              exit 1;; \
-          esac; \
-        done; \
-        echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/Makefile'; \
-        $(am__cd) $(top_srcdir) && \
-          $(AUTOMAKE) --gnu doc/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-        @case '$?' in \
-          *config.status*) \
-            cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
-          *) \
-            echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
-            cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
-        esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-        cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure:  $(am__configure_deps)
-        cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
-        cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-Doxyfile: $(top_builddir)/config.status $(srcdir)/Doxyfile.in
-        cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
-eet.dox: $(top_builddir)/config.status $(srcdir)/eet.dox.in
-        cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
-
-mostlyclean-libtool:
-        -rm -f *.lo
-
-clean-libtool:
-        -rm -rf .libs _libs
-tags: TAGS
-TAGS:
-
-ctags: CTAGS
-CTAGS:
-
-
-distdir: $(DISTFILES)
-        @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-        topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-        list='$(DISTFILES)'; \
-          dist_files=`for file in $$list; do echo $$file; done | \
-          sed -e "s|^$$srcdirstrip/||;t" \
-              -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
-        case $$dist_files in \
-          */*) $(MKDIR_P) `echo "$$dist_files" | \
-                           sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
-                           sort -u` ;; \
-        esac; \
-        for file in $$dist_files; do \
-          if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-          if test -d $$d/$$file; then \
-            dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
-            if test -d "$(distdir)/$$file"; then \
-              find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-            fi; \
-            if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-              cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
-              find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-            fi; \
-            cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
-          else \
-            test -f "$(distdir)/$$file" \
-            || cp -p $$d/$$file "$(distdir)/$$file" \
-            || exit 1; \
-          fi; \
-        done
-check-am: all-am
-check: check-am
-all-am: Makefile
-installdirs:
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
-        @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
-        $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-          install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-          `test -z '$(STRIP)' || \
-            echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-        -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-        -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
-        @echo "This command is intended for maintainers to use"
-        @echo "it deletes files that may require special tools to rebuild."
-        -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
-@EFL_BUILD_DOC_FALSE@clean-local:
-clean: clean-am
-
-clean-am: clean-generic clean-libtool clean-local mostlyclean-am
-
-distclean: distclean-am
-        -rm -f Makefile
-distclean-am: clean-am distclean-generic
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am:
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am:
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man:
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
-        -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic mostlyclean-libtool
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am:
-
-.MAKE: install-am install-strip
-
-.PHONY: all all-am check check-am clean clean-generic clean-libtool \
-        clean-local distclean distclean-generic distclean-libtool \
-        distdir dvi dvi-am html html-am info info-am install \
-        install-am install-data install-data-am install-dvi \
-        install-dvi-am install-exec install-exec-am install-html \
-        install-html-am install-info install-info-am install-man \
-        install-pdf install-pdf-am install-ps install-ps-am \
-        install-strip installcheck installcheck-am installdirs \
-        maintainer-clean maintainer-clean-generic mostlyclean \
-        mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
-        uninstall uninstall-am
-
-
-.PHONY: doc
-
-@EFL_BUILD_DOC_TRUE@doc-clean:
-@EFL_BUILD_DOC_TRUE@    rm -rf html/ latex/ xml/ $(PACKAGE_DOCNAME).tar*
-
-@EFL_BUILD_DOC_TRUE@doc: doc-clean
-@EFL_BUILD_DOC_TRUE@    $(efl_doxygen)
-@EFL_BUILD_DOC_TRUE@    cp $(srcdir)/img/* html/
-@EFL_BUILD_DOC_TRUE@    rm -rf $(PACKAGE_DOCNAME).tar*
-@EFL_BUILD_DOC_TRUE@    mkdir -p $(PACKAGE_DOCNAME)/doc
-@EFL_BUILD_DOC_TRUE@    cp -R html/ latex/ $(PACKAGE_DOCNAME)/doc
-@EFL_BUILD_DOC_TRUE@    tar cf $(PACKAGE_DOCNAME).tar $(PACKAGE_DOCNAME)/
-@EFL_BUILD_DOC_TRUE@    bzip2 -9 $(PACKAGE_DOCNAME).tar
-@EFL_BUILD_DOC_TRUE@    rm -rf $(PACKAGE_DOCNAME)/
-@EFL_BUILD_DOC_TRUE@    mv $(PACKAGE_DOCNAME).tar.bz2 $(top_builddir)
-@EFL_BUILD_DOC_TRUE@    @echo "Documentation Package: $(PACKAGE_DOCNAME).tar.bz2"
-@EFL_BUILD_DOC_TRUE@    @echo "Documentation HTML: doc/html"
-
-@EFL_BUILD_DOC_TRUE@clean-local: doc-clean
-
-@EFL_BUILD_DOC_FALSE@doc:
-@EFL_BUILD_DOC_FALSE@   @echo "Documentation not built. Run ./configure --help"
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/libraries/eet/doc/e.css b/libraries/eet/doc/e.css
deleted file mode 100644
index 07ebd1e..0000000
--- a/libraries/eet/doc/e.css
+++ /dev/null
@@ -1,436 +0,0 @@
-/*
-    Author:
-        Andres Blanc <andresblanc@gmail.com>
-        DaveMDS Andreoli <dave@gurumeditation.it>
-
-    Supported Browsers:
-        ie7, opera9, konqueror4 and firefox3
-
-        Please use a different file for ie6, ie5, etc. hacks.
-*/
-
-
-/* Necessary to place the footer at the bottom of the page */
-html, body {
-        height: 100%;
-        margin: 0px;
-        padding: 0px;
-}
-
-#container {
-        min-height: 100%;
-        height: auto !important;
-        height: 100%;
-        margin: 0 auto -53px;
-}
-
-#footer, #push {
-        height: 53px;
-}
-
-
-* html #container {
-        height: 100%;
-}
-
-/* Prevent floating elements overflowing containers */
-.clear {
-        clear: both;
-        width: 0px;
-        height: 0px;
-}
-
-/* Flexible & centered layout from 750 to 960 pixels */
-.layout {
-        max-width: 960px;
-        min-width: 760px;
-        margin-left: auto;
-        margin-right: auto;
-}
-
-body {
-        /*font-family: Lucida Grande, Helvetica, sans-serif;*/
-        font-family: "Bitstream Vera","Vera","Trebuchet MS",Trebuchet,Tahoma,sans-serif
-}
-
-/* Prevent design overflowing the viewport in small resolutions */
-#container {
-        padding-right: 17px;
-        padding-left: 17px;
-        background-image: url(head_bg.png);
-        background-repeat: repeat-x;
-}
-
-#header {
-        width: 100%;
-        height: 102px;
-}
-
-#header h1 {
-        width: 63px;
-        height: 63px;
-        background-image: url(e.png);
-        background-repeat: no-repeat;
-        position: absolute;
-        margin: 0px;
-}
-
-#header h1 span {
-        display: none;
-}
-
-#header h2 {
-        display: none;
-}
-
-/* .menu-container is used to set properties common to .menu and .submenu */
-#header .menu-container {
-}
-
-#header .menu-container ul {
-        list-style-type: none;
-        list-style-position: inside;
-        margin: 0;
-}
-
-#header .menu-container li {
-        display: block;
-        float: right;
-}
-
-#header .menu {
-        height: 63px;
-        display: block;
-        background-image: url(menu_bg.png);
-        background-repeat: repeat-x;
-}
-
-#header .menu ul {
-        height: 100%;
-        display: block;
-        background-image: url(menu_bg_last.png);
-        background-repeat: no-repeat;
-        background-position: top right;
-        padding-right: 17px;
-}
-
-#header .menu li {
-        height: 100%;
-        text-align: center;
-        background-image: url(menu_bg_unsel.png);
-        background-repeat: no-repeat;
-}
-
-#header .menu a {
-        height: 100%;
-        display: block;
-        color: #cdcdcd;
-        text-decoration: none;
-        font-size: 10pt;
-        line-height: 59px;
-        text-align: center;
-        padding: 0px 15px 0px 15px;
-}
-
-#header .menu li:hover {
-        background-image: url(menu_bg_hover.png);
-        background-repeat: no-repeat;
-}
-
-#header .menu li:hover a {
-        color: #FFFFFF;
-}
-
-#header .menu li.current {
-        background-image: url(menu_bg_current.png);
-        background-repeat: no-repeat;
-}
-
-#header .menu li.current a {
-        color: #646464;
-}
-
-
-/* Hide all the submenus but the current */
-#header .submenu ul {
-        display: none;
-}
-
-#header .submenu .current {
-        display: block;
-}
-
-#header .submenu {
-        font: bold 10px verdana,'Bitstream Vera Sans',helvetica,arial,sans-serif;
-        margin-top: 10px;
-}
-
-#header .submenu a {
-        color: #888888;
-        text-decoration: none;
-        font-size: 0.9em;
-        line-height: 15px;
-        padding:0px 5px 0px 5px;
-}
-
-#header .submenu a:hover {
-        color: #444444;
-}
-
-#header .submenu li {
-        border-left: 1px solid #DDDDDD;
-}
-
-#header .submenu li:last-child {
-        border-left: 0;
-}
-
-#header .doxytitle {
-        position: absolute;
-        font-size: 1.8em;
-        font-weight: bold;
-        color: #444444;
-        line-height: 35px;
-}
-
-#header small {
-        font-size: 0.4em;
-}
-
-#footer {
-        background-image: url(foot_bg.png);
-        width: 100%;
-}
-
-#footer table {
-        width: 100%;
-        text-align: center;
-        white-space: nowrap;
-        padding: 5px 30px 5px 30px;
-        font-size: 0.8em;
-        font-family: "Bitstream Vera","Vera","Trebuchet MS",Trebuchet,Tahoma,sans-serif;
-        color: #888888;
-}
-
-#footer td.copyright {
-        width: 100%;
-}
-
-/*
-    Author:
-        Andres Blanc <andresblanc@gmail.com>
-        DaveMDS Andreoli <dave@gurumeditation.it>
-
-    Supported Browsers:
-        ie7, opera9, konqueror4 and firefox3
-
-        Please use a different file for ie6, ie5, etc. hacks.
-*/
-
-
-/* Necessary to place the footer at the bottom of the page */
-html, body {
-        height: 100%;
-        margin: 0px;
-        padding: 0px;
-}
-
-#container {
-        min-height: 100%;
-        height: auto !important;
-        height: 100%;
-        margin: 0 auto -53px;
-}
-
-#footer, #push {
-        height: 53px;
-}
-
-
-* html #container {
-        height: 100%;
-}
-
-/* Prevent floating elements overflowing containers */
-.clear {
-        clear: both;
-        width: 0px;
-        height: 0px;
-}
-
-/* Flexible & centered layout from 750 to 960 pixels */
-.layout {
-        max-width: 960px;
-        min-width: 760px;
-        margin-left: auto;
-        margin-right: auto;
-}
-
-body {
-        /*font-family: Lucida Grande, Helvetica, sans-serif;*/
-        font-family: "Bitstream Vera","Vera","Trebuchet MS",Trebuchet,Tahoma,sans-serif
-}
-
-/* Prevent design overflowing the viewport in small resolutions */
-#container {
-        padding-right: 17px;
-        padding-left: 17px;
-        background-image: url(head_bg.png);
-        background-repeat: repeat-x;
-}
-
-#header {
-        width: 100%;
-        height: 102px;
-}
-
-#header h1 {
-        width: 63px;
-        height: 63px;
-        background-image: url(e.png);
-        background-repeat: no-repeat;
-        position: absolute;
-        margin: 0px;
-}
-
-#header h1 span {
-        display: none;
-}
-
-#header h2 {
-        display: none;
-}
-
-/* .menu-container is used to set properties common to .menu and .submenu */
-#header .menu-container {
-}
-
-#header .menu-container ul {
-        list-style-type: none;
-        list-style-position: inside;
-        margin: 0;
-}
-
-#header .menu-container li {
-        display: block;
-        float: right;
-}
-
-#header .menu {
-        height: 63px;
-        display: block;
-        background-image: url(menu_bg.png);
-        background-repeat: repeat-x;
-}
-
-#header .menu ul {
-        height: 100%;
-        display: block;
-        background-image: url(menu_bg_last.png);
-        background-repeat: no-repeat;
-        background-position: top right;
-        padding-right: 17px;
-}
-
-#header .menu li {
-        height: 100%;
-        text-align: center;
-        background-image: url(menu_bg_unsel.png);
-        background-repeat: no-repeat;
-}
-
-#header .menu a {
-        height: 100%;
-        display: block;
-        color: #cdcdcd;
-        text-decoration: none;
-        font-size: 10pt;
-        line-height: 59px;
-        text-align: center;
-        padding: 0px 15px 0px 15px;
-}
-
-#header .menu li:hover {
-        background-image: url(menu_bg_hover.png);
-        background-repeat: no-repeat;
-}
-
-#header .menu li:hover a {
-        color: #FFFFFF;
-}
-
-#header .menu li.current {
-        background-image: url(menu_bg_current.png);
-        background-repeat: no-repeat;
-}
-
-#header .menu li.current a {
-        color: #646464;
-}
-
-
-/* Hide all the submenus but the current */
-#header .submenu ul {
-        display: none;
-}
-
-#header .submenu .current {
-        display: block;
-}
-
-#header .submenu {
-        font: bold 10px verdana,'Bitstream Vera Sans',helvetica,arial,sans-serif;
-        margin-top: 10px;
-}
-
-#header .submenu a {
-        color: #888888;
-        text-decoration: none;
-        font-size: 0.9em;
-        line-height: 15px;
-        padding:0px 5px 0px 5px;
-}
-
-#header .submenu a:hover {
-        color: #444444;
-}
-
-#header .submenu li {
-        border-left: 1px solid #DDDDDD;
-}
-
-#header .submenu li:last-child {
-        border-left: 0;
-}
-
-#header .doxytitle {
-        position: absolute;
-        font-size: 1.8em;
-        font-weight: bold;
-        color: #444444;
-        line-height: 35px;
-}
-
-#header small {
-        font-size: 0.4em;
-}
-
-#footer {
-        background-image: url(foot_bg.png);
-        width: 100%;
-}
-
-#footer table {
-        width: 100%;
-        text-align: center;
-        white-space: nowrap;
-        padding: 5px 30px 5px 30px;
-        font-size: 0.8em;
-        font-family: "Bitstream Vera","Vera","Trebuchet MS",Trebuchet,Tahoma,sans-serif;
-        color: #888888;
-}
-
-#footer td.copyright {
-        width: 100%;
-}
-
diff --git a/libraries/eet/doc/eet.dox.in b/libraries/eet/doc/eet.dox.in
deleted file mode 100644
index e69de29..0000000
--- a/libraries/eet/doc/eet.dox.in
+++ /dev/null
diff --git a/libraries/eet/doc/foot.html b/libraries/eet/doc/foot.html
deleted file mode 100644
index 3a96978..0000000
--- a/libraries/eet/doc/foot.html
+++ /dev/null
@@ -1,20 +0,0 @@
- 
- <div id="push"></div>
- </div> <!-- #content -->
-  </div> <!-- .layout -->
- 
- </div> <!-- #container -->
- 
- 
-  <div id="footer">
-    <table><tr>
-      <td class="poweredby"><img src="doxygen.png"></td>
-      <td>Samsung Electronics is supporting the EFL Documentation Project</td>
-      <td class="copyright">Copyright &copy;$year Enlightenment</td>
-      <td class="generated">Docs generated $datetime</td>
-    </tr></table>
-  </div>
-
-
-</body>
-</html>
diff --git a/libraries/eet/doc/head.html b/libraries/eet/doc/head.html
deleted file mode 100644
index 519631b..0000000
--- a/libraries/eet/doc/head.html
+++ /dev/null
@@ -1,65 +0,0 @@
-<html>
-<head>
-    <title>$title</title>
-    <meta http-equiv="content-type" content="text/html;charset=UTF-8">
-    <meta name="author" content="Andres Blanc" >
-    
-    <link rel="icon" href="img/favicon.png" type="image/x-icon">
-    <link rel="shortcut icon" href="img/favicon.png" type="image/x-icon">
-    <link rel="icon" href="img/favicon.png" type="image/ico">
-    <link rel="shortcut icon" href="img/favicon.png" type="image/ico">
-
-    <link rel="stylesheet" type="text/css" media="screen" href="e.css">
-    <link rel="stylesheet" type="text/css" media="screen" href="edoxy.css">
-</head>
-
-<body>
-
-<div id="container">
-
-<div id="header">
-<div class="layout">
-    
-    <h1><span>Enlightenment</span></h1>
-    <h2><span>Beauty at your fingertips</span></h2>
-
-    <div class="menu-container">
-        <div class="menu">
-            <ul>
-                <li class="current"><a href="http://web.enlightenment.org/p.php?p=docs">Docs</a></li>
-                <li><a href="http://trac.enlightenment.org/e">Tracker</a></li>
-                <li><a href="http://www.enlightenment.org/p.php?p=contact">Contact</a></li>
-                <li><a href="http://www.enlightenment.org/p.php?p=contribute">Contribute</a></li>
-                <li><a href="http://www.enlightenment.org/p.php?p=support">Support</a></li>
-                <li><a href="http://www.enlightenment.org/p.php?p=download">Download</a></li>
-                <li><a href="http://www.enlightenment.org/p.php?p=about">About</a></li>
-                <li><a href="http://www.enlightenment.org/p.php?p=news">News</a></li>
-                <li><a href="http://www.enlightenment.org/">Home</a></li>
-            </ul>
-        </div>
-    </div>
-
-    <div class="doxytitle">
-        $projectname Documentation <small>at $date</small>
-    </div>
-
-    <div class="menu-container">
-        <div class="submenu">
-            <ul class="current">
-                <li><a href="Examples.html">Examples</a></li>
-                <li><a href="files.html">Files</a></li>
-                <li><a href="modules.html">Modules</a></li>
-                <li><a href="globals.html">Globals</a></li>
-                <li><a href="pages.html">Related Pages</a></li>
-                <li class="current"><a href="index.html">Main Page</a></li>
-            </ul>
-        </div>
-    </div>
-
-
-    <div class="clear"></div>
-</div>
-</div>
-
-<div id="content">
-<div class="layout">
diff --git a/libraries/eet/doc/img/e.png b/libraries/eet/doc/img/e.png
deleted file mode 100755
index b3884a5..0000000
--- a/libraries/eet/doc/img/e.png
+++ /dev/null
diff --git a/libraries/eet/doc/img/e_big.png b/libraries/eet/doc/img/e_big.png
deleted file mode 100755
index d42aeb4..0000000
--- a/libraries/eet/doc/img/e_big.png
+++ /dev/null
diff --git a/libraries/eet/doc/img/edoxy.css b/libraries/eet/doc/img/edoxy.css
deleted file mode 100755
index 616a0c5..0000000
--- a/libraries/eet/doc/img/edoxy.css
+++ /dev/null
@@ -1,966 +0,0 @@
-/*
- * This file contain a custom doxygen style to match e.org graphics
- */
-
-
-
-/* BODY,H1,H2,H3,H4,H5,H6,P,CENTER,TD,TH,UL,DL,DIV {
-        font-family: Geneva, Arial, Helvetica, sans-serif;
-}*/ 
-BODY, TD {
-        font-size: 12px;
-}
-H1 {
-        text-align: center;
-        font-size: 160%;
-}
-H2 {
-        font-size: 120%;
-}
-H3 {
-        font-size: 100%;
-}
-CAPTION { 
-        font-weight: bold 
-}
-DIV.qindex {
-        width: 100%;
-        background-color: #e8eef2;
-        border: 1px solid #84b0c7;
-        text-align: center;
-        margin: 2px;
-        padding: 2px;
-        line-height: 140%;
-}
-DIV.navpath {
-        width: 100%;
-        background-color: #e8eef2;
-        border: 1px solid #84b0c7;
-        text-align: center;
-        margin: 2px;
-        padding: 2px;
-        line-height: 140%;
-}
-DIV.navtab {
-       background-color: #e8eef2;
-       border: 1px solid #84b0c7;
-       text-align: center;
-       margin: 2px;
-       margin-right: 15px;
-       padding: 2px;
-}
-TD.navtab {
-       font-size: 70%;
-}
-A.qindex {
-       text-decoration: none;
-       font-weight: bold;
-       color: #1A419D;
-}
-A.qindex:visited {
-       text-decoration: none;
-       font-weight: bold;
-       color: #1A419D
-}
-A.qindex:hover {
-        text-decoration: none;
-        background-color: #ddddff;
-}
-A.qindexHL {
-        text-decoration: none;
-        font-weight: bold;
-        background-color: #6666cc;
-        color: #ffffff;
-        border: 1px double #9295C2;
-}
-A.qindexHL:hover {
-        text-decoration: none;
-        background-color: #6666cc;
-        color: #ffffff;
-}
-A.qindexHL:visited { 
-        text-decoration: none; 
-        background-color: #6666cc; 
-        color: #ffffff 
-}
-A.el { 
-        text-decoration: none; 
-        font-weight: bold 
-}
-A.elRef { 
-        font-weight: bold 
-}
-A.code:link { 
-        text-decoration: none; 
-        font-weight: normal; 
-        color: #0000FF
-}
-A.code:visited { 
-        text-decoration: none; 
-        font-weight: normal; 
-        color: #0000FF
-}
-A.codeRef:link { 
-        font-weight: normal; 
-        color: #0000FF
-}
-A.codeRef:visited { 
-        font-weight: normal; 
-        color: #0000FF
-}
-A:hover, A:visited:hover { 
-        text-decoration: none;  
-        /* background-color: #f2f2ff; */
-        color: #000055;
-}
-A.anchor {
-        color: #000;
-}
-DL.el { 
-        margin-left: -1cm 
-}
-.fragment {
-       font-family: monospace, fixed;
-       font-size: 95%;
-}
-PRE.fragment {
-        border: 1px solid #CCCCCC;
-        background-color: #f5f5f5;
-        margin-top: 4px;
-        margin-bottom: 4px;
-        margin-left: 2px;
-        margin-right: 8px;
-        padding-left: 6px;
-        padding-right: 6px;
-        padding-top: 4px;
-        padding-bottom: 4px;
-}
-DIV.ah { 
-        background-color: black; 
-        font-weight: bold; 
-        color: #ffffff; 
-        margin-bottom: 3px; 
-        margin-top: 3px 
-}
-
-DIV.groupHeader {
-       margin-left: 16px;
-       margin-top: 12px;
-       margin-bottom: 6px;
-       font-weight: bold;
-}
-DIV.groupText { 
-        margin-left: 16px; 
-        font-style: italic; 
-        font-size: 90% 
-}
-/*BODY {
-        background: white;
-        color: black;
-        margin-right: 20px;
-        margin-left: 20px;
-}*/
-TD.indexkey {
-        background-color: #e8eef2;
-        font-weight: bold;
-        padding-right  : 10px;
-        padding-top    : 2px;
-        padding-left   : 10px;
-        padding-bottom : 2px;
-        margin-left    : 0px;
-        margin-right   : 0px;
-        margin-top     : 2px;
-        margin-bottom  : 2px;
-        border: 1px solid #CCCCCC;
-}
-TD.indexvalue {
-        background-color: #e8eef2;
-        font-style: italic;
-        padding-right  : 10px;
-        padding-top    : 2px;
-        padding-left   : 10px;
-        padding-bottom : 2px;
-        margin-left    : 0px;
-        margin-right   : 0px;
-        margin-top     : 2px;
-        margin-bottom  : 2px;
-        border: 1px solid #CCCCCC;
-}
-TR.memlist {
-        background-color: #f0f0f0; 
-}
-P.formulaDsp { 
-        text-align: center; 
-}
-IMG.formulaDsp {
-}
-IMG.formulaInl { 
-        vertical-align: middle; 
-}
-SPAN.keyword       { color: #008000 }
-SPAN.keywordtype   { color: #604020 }
-SPAN.keywordflow   { color: #e08000 }
-SPAN.comment       { color: #800000 }
-SPAN.preprocessor  { color: #806020 }
-SPAN.stringliteral { color: #002080 }
-SPAN.charliteral   { color: #008080 }
-SPAN.vhdldigit     { color: #ff00ff }
-SPAN.vhdlchar      { color: #000000 }
-SPAN.vhdlkeyword   { color: #700070 }
-SPAN.vhdllogic     { color: #ff0000 }
-
-.mdescLeft {
-        padding: 0px 8px 4px 8px;
-        font-size: 80%;
-        font-style: italic;
-        background-color: #FAFAFA;
-        border-top: 1px none #E0E0E0;
-        border-right: 1px none #E0E0E0;
-        border-bottom: 1px none #E0E0E0;
-        border-left: 1px none #E0E0E0;
-        margin: 0px;
-}
-.mdescRight {
-        padding: 0px 8px 4px 8px;
-        font-size: 80%;
-        font-style: italic;
-        background-color: #FAFAFA;
-        border-top: 1px none #E0E0E0;
-        border-right: 1px none #E0E0E0;
-        border-bottom: 1px none #E0E0E0;
-        border-left: 1px none #E0E0E0;
-        margin: 0px;
-}
-.memItemLeft {
-        padding: 1px 0px 0px 8px;
-        margin: 4px;
-        border-top-width: 1px;
-        border-right-width: 1px;
-        border-bottom-width: 1px;
-        border-left-width: 1px;
-        border-top-color: #E0E0E0;
-        border-right-color: #E0E0E0;
-        border-bottom-color: #E0E0E0;
-        border-left-color: #E0E0E0;
-        border-top-style: solid;
-        border-right-style: none;
-        border-bottom-style: none;
-        border-left-style: none;
-        background-color: #FAFAFA;
-        font-size: 80%;
-}
-.memItemRight {
-        padding: 1px 8px 0px 8px;
-        margin: 4px;
-        border-top-width: 1px;
-        border-right-width: 1px;
-        border-bottom-width: 1px;
-        border-left-width: 1px;
-        border-top-color: #E0E0E0;
-        border-right-color: #E0E0E0;
-        border-bottom-color: #E0E0E0;
-        border-left-color: #E0E0E0;
-        border-top-style: solid;
-        border-right-style: none;
-        border-bottom-style: none;
-        border-left-style: none;
-        background-color: #FAFAFA;
-        font-size: 80%;
-}
-.memTemplItemLeft {
-        padding: 1px 0px 0px 8px;
-        margin: 4px;
-        border-top-width: 1px;
-        border-right-width: 1px;
-        border-bottom-width: 1px;
-        border-left-width: 1px;
-        border-top-color: #E0E0E0;
-        border-right-color: #E0E0E0;
-        border-bottom-color: #E0E0E0;
-        border-left-color: #E0E0E0;
-        border-top-style: none;
-        border-right-style: none;
-        border-bottom-style: none;
-        border-left-style: none;
-        background-color: #FAFAFA;
-        font-size: 80%;
-}
-.memTemplItemRight {
-        padding: 1px 8px 0px 8px;
-        margin: 4px;
-        border-top-width: 1px;
-        border-right-width: 1px;
-        border-bottom-width: 1px;
-        border-left-width: 1px;
-        border-top-color: #E0E0E0;
-        border-right-color: #E0E0E0;
-        border-bottom-color: #E0E0E0;
-        border-left-color: #E0E0E0;
-        border-top-style: none;
-        border-right-style: none;
-        border-bottom-style: none;
-        border-left-style: none;
-        background-color: #FAFAFA;
-        font-size: 80%;
-}
-.memTemplParams {
-        padding: 1px 0px 0px 8px;
-        margin: 4px;
-        border-top-width: 1px;
-        border-right-width: 1px;
-        border-bottom-width: 1px;
-        border-left-width: 1px;
-        border-top-color: #E0E0E0;
-        border-right-color: #E0E0E0;
-        border-bottom-color: #E0E0E0;
-        border-left-color: #E0E0E0;
-        border-top-style: solid;
-        border-right-style: none;
-        border-bottom-style: none;
-        border-left-style: none;
-        color: #606060;
-        background-color: #FAFAFA;
-        font-size: 80%;
-}
-.search { 
-        color: #003399;
-        font-weight: bold;
-}
-FORM.search {
-        margin-bottom: 0px;
-        margin-top: 0px;
-}
-INPUT.search { 
-        font-size: 75%;
-        color: #000080;
-        font-weight: normal;
-        background-color: #e8eef2;
-}
-TD.tiny { 
-        font-size: 75%;
-}
-a {
-        color: #1A41A8;
-}
-a:visited {
-        color: #2A3798;
-}
-.dirtab { 
-        padding: 4px;
-        border-collapse: collapse;
-        border: 1px solid #84b0c7;
-}
-TH.dirtab { 
-        background: #e8eef2;
-        font-weight: bold;
-}
-HR { 
-        height: 1px;
-        border: none;
-        border-top: 1px solid black;
-}
-
-/* Style for detailed member documentation */
-.memtemplate {
-        font-size: 80%;
-        color: #606060;
-        font-weight: normal;
-        margin-left: 3px;
-} 
-.memnav { 
-        background-color: #e8eef2;
-        border: 1px solid #84b0c7;
-        text-align: center;
-        margin: 2px;
-        margin-right: 15px;
-        padding: 2px;
-}
-.memitem {
-        padding: 4px;
-        background-color: #eef3f5;
-        border-width: 1px;
-        border-style: solid;
-        border-color: #dedeee;
-        -moz-border-radius: 8px 8px 8px 8px;
-}
-.memname {
-        white-space: nowrap;
-        font-weight: bold;
-}
-.memdoc{
-        padding-left: 10px;
-}
-.memproto {
-        background-color: #d5e1e8;
-        width: 100%;
-        border-width: 1px;
-        border-style: solid;
-        border-color: #84b0c7;
-        font-weight: bold;
-        -moz-border-radius: 8px 8px 8px 8px;
-}
-.paramkey {
-        text-align: right;
-}
-.paramtype {
-        white-space: nowrap;
-}
-.paramname {
-        color: #602020;
-        font-style: italic;
-        white-space: nowrap;
-}
-/* End Styling for detailed member documentation */
-
-/* for the tree view */
-.ftvtree {
-        font-family: sans-serif;
-        margin:0.5em;
-}
-/* these are for tree view when used as main index */
-.directory { 
-        font-size: 9pt; 
-        font-weight: bold; 
-}
-.directory h3 { 
-        margin: 0px; 
-        margin-top: 1em; 
-        font-size: 11pt; 
-}
-
-/* The following two styles can be used to replace the root node title */
-/* with an image of your choice.  Simply uncomment the next two styles, */
-/* specify the name of your image and be sure to set 'height' to the */
-/* proper pixel height of your image. */
-
-/* .directory h3.swap { */
-/*      height: 61px; */
-/*      background-repeat: no-repeat; */
-/*      background-image: url("yourimage.gif"); */
-/* } */
-/* .directory h3.swap span { */
-/*      display: none; */
-/* } */
-
-.directory > h3 { 
-        margin-top: 0; 
-}
-.directory p { 
-        margin: 0px; 
-        white-space: nowrap; 
-}
-.directory div { 
-        display: none; 
-        margin: 0px; 
-}
-.directory img { 
-        vertical-align: -30%; 
-}
-/* these are for tree view when not used as main index */
-.directory-alt { 
-        font-size: 100%; 
-        font-weight: bold; 
-}
-.directory-alt h3 { 
-        margin: 0px; 
-        margin-top: 1em; 
-        font-size: 11pt; 
-}
-.directory-alt > h3 { 
-        margin-top: 0; 
-}
-.directory-alt p { 
-        margin: 0px; 
-        white-space: nowrap; 
-}
-.directory-alt div { 
-        display: none; 
-        margin: 0px; 
-}
-.directory-alt img { 
-        vertical-align: -30%; 
-}
-
-/*
- * This file contain a custom doxygen style to match e.org graphics
- */
-
-
-
-/* BODY,H1,H2,H3,H4,H5,H6,P,CENTER,TD,TH,UL,DL,DIV {
-        font-family: Geneva, Arial, Helvetica, sans-serif;
-}*/ 
-BODY, TD {
-        font-size: 12px;
-}
-H1 {
-        text-align: center;
-        font-size: 160%;
-}
-H2 {
-        font-size: 120%;
-}
-H3 {
-        font-size: 100%;
-}
-CAPTION { 
-        font-weight: bold 
-}
-DIV.qindex {
-        width: 100%;
-        background-color: #e8eef2;
-        border: 1px solid #84b0c7;
-        text-align: center;
-        margin: 2px;
-        padding: 2px;
-        line-height: 140%;
-}
-DIV.navpath {
-        width: 100%;
-        background-color: #e8eef2;
-        border: 1px solid #84b0c7;
-        text-align: center;
-        margin: 2px;
-        padding: 2px;
-        line-height: 140%;
-}
-DIV.navtab {
-       background-color: #e8eef2;
-       border: 1px solid #84b0c7;
-       text-align: center;
-       margin: 2px;
-       margin-right: 15px;
-       padding: 2px;
-}
-TD.navtab {
-       font-size: 70%;
-}
-A.qindex {
-       text-decoration: none;
-       font-weight: bold;
-       color: #1A419D;
-}
-A.qindex:visited {
-       text-decoration: none;
-       font-weight: bold;
-       color: #1A419D
-}
-A.qindex:hover {
-        text-decoration: none;
-        background-color: #ddddff;
-}
-A.qindexHL {
-        text-decoration: none;
-        font-weight: bold;
-        background-color: #6666cc;
-        color: #ffffff;
-        border: 1px double #9295C2;
-}
-A.qindexHL:hover {
-        text-decoration: none;
-        background-color: #6666cc;
-        color: #ffffff;
-}
-A.qindexHL:visited { 
-        text-decoration: none; 
-        background-color: #6666cc; 
-        color: #ffffff 
-}
-A.el { 
-        text-decoration: none; 
-        font-weight: bold 
-}
-A.elRef { 
-        font-weight: bold 
-}
-A.code:link { 
-        text-decoration: none; 
-        font-weight: normal; 
-        color: #0000FF
-}
-A.code:visited { 
-        text-decoration: none; 
-        font-weight: normal; 
-        color: #0000FF
-}
-A.codeRef:link { 
-        font-weight: normal; 
-        color: #0000FF
-}
-A.codeRef:visited { 
-        font-weight: normal; 
-        color: #0000FF
-}
-A:hover, A:visited:hover { 
-        text-decoration: none;  
-        /* background-color: #f2f2ff; */
-        color: #000055;
-}
-A.anchor {
-        color: #000;
-}
-DL.el { 
-        margin-left: -1cm 
-}
-.fragment {
-       font-family: monospace, fixed;
-       font-size: 95%;
-}
-PRE.fragment {
-        border: 1px solid #CCCCCC;
-        background-color: #f5f5f5;
-        margin-top: 4px;
-        margin-bottom: 4px;
-        margin-left: 2px;
-        margin-right: 8px;
-        padding-left: 6px;
-        padding-right: 6px;
-        padding-top: 4px;
-        padding-bottom: 4px;
-}
-DIV.ah { 
-        background-color: black; 
-        font-weight: bold; 
-        color: #ffffff; 
-        margin-bottom: 3px; 
-        margin-top: 3px 
-}
-
-DIV.groupHeader {
-       margin-left: 16px;
-       margin-top: 12px;
-       margin-bottom: 6px;
-       font-weight: bold;
-}
-DIV.groupText { 
-        margin-left: 16px; 
-        font-style: italic; 
-        font-size: 90% 
-}
-/*BODY {
-        background: white;
-        color: black;
-        margin-right: 20px;
-        margin-left: 20px;
-}*/
-TD.indexkey {
-        background-color: #e8eef2;
-        font-weight: bold;
-        padding-right  : 10px;
-        padding-top    : 2px;
-        padding-left   : 10px;
-        padding-bottom : 2px;
-        margin-left    : 0px;
-        margin-right   : 0px;
-        margin-top     : 2px;
-        margin-bottom  : 2px;
-        border: 1px solid #CCCCCC;
-}
-TD.indexvalue {
-        background-color: #e8eef2;
-        font-style: italic;
-        padding-right  : 10px;
-        padding-top    : 2px;
-        padding-left   : 10px;
-        padding-bottom : 2px;
-        margin-left    : 0px;
-        margin-right   : 0px;
-        margin-top     : 2px;
-        margin-bottom  : 2px;
-        border: 1px solid #CCCCCC;
-}
-TR.memlist {
-        background-color: #f0f0f0; 
-}
-P.formulaDsp { 
-        text-align: center; 
-}
-IMG.formulaDsp {
-}
-IMG.formulaInl { 
-        vertical-align: middle; 
-}
-SPAN.keyword       { color: #008000 }
-SPAN.keywordtype   { color: #604020 }
-SPAN.keywordflow   { color: #e08000 }
-SPAN.comment       { color: #800000 }
-SPAN.preprocessor  { color: #806020 }
-SPAN.stringliteral { color: #002080 }
-SPAN.charliteral   { color: #008080 }
-SPAN.vhdldigit     { color: #ff00ff }
-SPAN.vhdlchar      { color: #000000 }
-SPAN.vhdlkeyword   { color: #700070 }
-SPAN.vhdllogic     { color: #ff0000 }
-
-.mdescLeft {
-        padding: 0px 8px 4px 8px;
-        font-size: 80%;
-        font-style: italic;
-        background-color: #FAFAFA;
-        border-top: 1px none #E0E0E0;
-        border-right: 1px none #E0E0E0;
-        border-bottom: 1px none #E0E0E0;
-        border-left: 1px none #E0E0E0;
-        margin: 0px;
-}
-.mdescRight {
-        padding: 0px 8px 4px 8px;
-        font-size: 80%;
-        font-style: italic;
-        background-color: #FAFAFA;
-        border-top: 1px none #E0E0E0;
-        border-right: 1px none #E0E0E0;
-        border-bottom: 1px none #E0E0E0;
-        border-left: 1px none #E0E0E0;
-        margin: 0px;
-}
-.memItemLeft {
-        padding: 1px 0px 0px 8px;
-        margin: 4px;
-        border-top-width: 1px;
-        border-right-width: 1px;
-        border-bottom-width: 1px;
-        border-left-width: 1px;
-        border-top-color: #E0E0E0;
-        border-right-color: #E0E0E0;
-        border-bottom-color: #E0E0E0;
-        border-left-color: #E0E0E0;
-        border-top-style: solid;
-        border-right-style: none;
-        border-bottom-style: none;
-        border-left-style: none;
-        background-color: #FAFAFA;
-        font-size: 80%;
-}
-.memItemRight {
-        padding: 1px 8px 0px 8px;
-        margin: 4px;
-        border-top-width: 1px;
-        border-right-width: 1px;
-        border-bottom-width: 1px;
-        border-left-width: 1px;
-        border-top-color: #E0E0E0;
-        border-right-color: #E0E0E0;
-        border-bottom-color: #E0E0E0;
-        border-left-color: #E0E0E0;
-        border-top-style: solid;
-        border-right-style: none;
-        border-bottom-style: none;
-        border-left-style: none;
-        background-color: #FAFAFA;
-        font-size: 80%;
-}
-.memTemplItemLeft {
-        padding: 1px 0px 0px 8px;
-        margin: 4px;
-        border-top-width: 1px;
-        border-right-width: 1px;
-        border-bottom-width: 1px;
-        border-left-width: 1px;
-        border-top-color: #E0E0E0;
-        border-right-color: #E0E0E0;
-        border-bottom-color: #E0E0E0;
-        border-left-color: #E0E0E0;
-        border-top-style: none;
-        border-right-style: none;
-        border-bottom-style: none;
-        border-left-style: none;
-        background-color: #FAFAFA;
-        font-size: 80%;
-}
-.memTemplItemRight {
-        padding: 1px 8px 0px 8px;
-        margin: 4px;
-        border-top-width: 1px;
-        border-right-width: 1px;
-        border-bottom-width: 1px;
-        border-left-width: 1px;
-        border-top-color: #E0E0E0;
-        border-right-color: #E0E0E0;
-        border-bottom-color: #E0E0E0;
-        border-left-color: #E0E0E0;
-        border-top-style: none;
-        border-right-style: none;
-        border-bottom-style: none;
-        border-left-style: none;
-        background-color: #FAFAFA;
-        font-size: 80%;
-}
-.memTemplParams {
-        padding: 1px 0px 0px 8px;
-        margin: 4px;
-        border-top-width: 1px;
-        border-right-width: 1px;
-        border-bottom-width: 1px;
-        border-left-width: 1px;
-        border-top-color: #E0E0E0;
-        border-right-color: #E0E0E0;
-        border-bottom-color: #E0E0E0;
-        border-left-color: #E0E0E0;
-        border-top-style: solid;
-        border-right-style: none;
-        border-bottom-style: none;
-        border-left-style: none;
-        color: #606060;
-        background-color: #FAFAFA;
-        font-size: 80%;
-}
-.search { 
-        color: #003399;
-        font-weight: bold;
-}
-FORM.search {
-        margin-bottom: 0px;
-        margin-top: 0px;
-}
-INPUT.search { 
-        font-size: 75%;
-        color: #000080;
-        font-weight: normal;
-        background-color: #e8eef2;
-}
-TD.tiny { 
-        font-size: 75%;
-}
-a {
-        color: #1A41A8;
-}
-a:visited {
-        color: #2A3798;
-}
-.dirtab { 
-        padding: 4px;
-        border-collapse: collapse;
-        border: 1px solid #84b0c7;
-}
-TH.dirtab { 
-        background: #e8eef2;
-        font-weight: bold;
-}
-HR { 
-        height: 1px;
-        border: none;
-        border-top: 1px solid black;
-}
-
-/* Style for detailed member documentation */
-.memtemplate {
-        font-size: 80%;
-        color: #606060;
-        font-weight: normal;
-        margin-left: 3px;
-} 
-.memnav { 
-        background-color: #e8eef2;
-        border: 1px solid #84b0c7;
-        text-align: center;
-        margin: 2px;
-        margin-right: 15px;
-        padding: 2px;
-}
-.memitem {
-        padding: 4px;
-        background-color: #eef3f5;
-        border-width: 1px;
-        border-style: solid;
-        border-color: #dedeee;
-        -moz-border-radius: 8px 8px 8px 8px;
-}
-.memname {
-        white-space: nowrap;
-        font-weight: bold;
-}
-.memdoc{
-        padding-left: 10px;
-}
-.memproto {
-        background-color: #d5e1e8;
-        width: 100%;
-        border-width: 1px;
-        border-style: solid;
-        border-color: #84b0c7;
-        font-weight: bold;
-        -moz-border-radius: 8px 8px 8px 8px;
-}
-.paramkey {
-        text-align: right;
-}
-.paramtype {
-        white-space: nowrap;
-}
-.paramname {
-        color: #602020;
-        font-style: italic;
-        white-space: nowrap;
-}
-/* End Styling for detailed member documentation */
-
-/* for the tree view */
-.ftvtree {
-        font-family: sans-serif;
-        margin:0.5em;
-}
-/* these are for tree view when used as main index */
-.directory { 
-        font-size: 9pt; 
-        font-weight: bold; 
-}
-.directory h3 { 
-        margin: 0px; 
-        margin-top: 1em; 
-        font-size: 11pt; 
-}
-
-/* The following two styles can be used to replace the root node title */
-/* with an image of your choice.  Simply uncomment the next two styles, */
-/* specify the name of your image and be sure to set 'height' to the */
-/* proper pixel height of your image. */
-
-/* .directory h3.swap { */
-/*      height: 61px; */
-/*      background-repeat: no-repeat; */
-/*      background-image: url("yourimage.gif"); */
-/* } */
-/* .directory h3.swap span { */
-/*      display: none; */
-/* } */
-
-.directory > h3 { 
-        margin-top: 0; 
-}
-.directory p { 
-        margin: 0px; 
-        white-space: nowrap; 
-}
-.directory div { 
-        display: none; 
-        margin: 0px; 
-}
-.directory img { 
-        vertical-align: -30%; 
-}
-/* these are for tree view when not used as main index */
-.directory-alt { 
-        font-size: 100%; 
-        font-weight: bold; 
-}
-.directory-alt h3 { 
-        margin: 0px; 
-        margin-top: 1em; 
-        font-size: 11pt; 
-}
-.directory-alt > h3 { 
-        margin-top: 0; 
-}
-.directory-alt p { 
-        margin: 0px; 
-        white-space: nowrap; 
-}
-.directory-alt div { 
-        display: none; 
-        margin: 0px; 
-}
-.directory-alt img { 
-        vertical-align: -30%; 
-}
-
diff --git a/libraries/eet/doc/img/eet.png b/libraries/eet/doc/img/eet.png
deleted file mode 100644
index 47597a8..0000000
--- a/libraries/eet/doc/img/eet.png
+++ /dev/null
diff --git a/libraries/eet/doc/img/foot_bg.png b/libraries/eet/doc/img/foot_bg.png
deleted file mode 100755
index b24f3a4..0000000
--- a/libraries/eet/doc/img/foot_bg.png
+++ /dev/null
diff --git a/libraries/eet/doc/img/head_bg.png b/libraries/eet/doc/img/head_bg.png
deleted file mode 100755
index 081dc13..0000000
--- a/libraries/eet/doc/img/head_bg.png
+++ /dev/null
diff --git a/libraries/eet/doc/img/hilite.png b/libraries/eet/doc/img/hilite.png
deleted file mode 100644
index 88a4381..0000000
--- a/libraries/eet/doc/img/hilite.png
+++ /dev/null
diff --git a/libraries/eet/doc/img/menu_bg.png b/libraries/eet/doc/img/menu_bg.png
deleted file mode 100755
index e978743..0000000
--- a/libraries/eet/doc/img/menu_bg.png
+++ /dev/null
diff --git a/libraries/eet/doc/img/menu_bg_current.png b/libraries/eet/doc/img/menu_bg_current.png
deleted file mode 100755
index de97c92..0000000
--- a/libraries/eet/doc/img/menu_bg_current.png
+++ /dev/null
diff --git a/libraries/eet/doc/img/menu_bg_hover.png b/libraries/eet/doc/img/menu_bg_hover.png
deleted file mode 100755
index 3fd851d..0000000
--- a/libraries/eet/doc/img/menu_bg_hover.png
+++ /dev/null
diff --git a/libraries/eet/doc/img/menu_bg_last.png b/libraries/eet/doc/img/menu_bg_last.png
deleted file mode 100755
index 88c116c..0000000
--- a/libraries/eet/doc/img/menu_bg_last.png
+++ /dev/null
diff --git a/libraries/eet/doc/img/menu_bg_unsel.png b/libraries/eet/doc/img/menu_bg_unsel.png
deleted file mode 100755
index 50e5fd8..0000000
--- a/libraries/eet/doc/img/menu_bg_unsel.png
+++ /dev/null
diff --git a/libraries/eet/eet.pc.in b/libraries/eet/eet.pc.in
deleted file mode 100644
index f7a3bf1..0000000
--- a/libraries/eet/eet.pc.in
+++ /dev/null
@@ -1,13 +0,0 @@
-prefix=@prefix@
-exec_prefix=@exec_prefix@
-libdir=@libdir@
-includedir=@includedir@
-
-Name: eet
-Description: Library for speedy data storage, retrieval, and compression
-@pkgconfig_requires_private@: @requirement_eet@
-Version: @VERSION@
-Libs: -L${libdir} -leet
-Libs.private: @EET_LIBS@ @EFL_FNMATCH_LIBS@ @LIBGCRYPT_LIBS@ -ljpeg -lz -lm
-Cflags: -I${includedir}/eet-@VMAJ@
-Cflags.private: @LIBGCRYPT_CFLAGS@
diff --git a/libraries/eet/eet.spec b/libraries/eet/eet.spec
deleted file mode 100644
index a357773..0000000
--- a/libraries/eet/eet.spec
+++ /dev/null
@@ -1,76 +0,0 @@
-%{!?_rel:%{expand:%%global _rel 0.enl%{?dist}}}
-%define _missing_doc_files_terminate_build 0
-
-Summary: Library for speedy data storage, retrieval, and compression.
-Name: eet
-Version: 1.6.0-alpha
-Release: %{_rel}
-License: BSD
-Group: System Environment/Libraries
-Source: http://download.enlightenment.org/releases/%{name}-%{version}.tar.gz
-Packager: %{?_packager:%{_packager}}%{!?_packager:Michael Jennings <mej@eterm.org>}
-Vendor: %{?_vendorinfo:%{_vendorinfo}}%{!?_vendorinfo:The Enlightenment Project (http://www.enlightenment.org/)}
-Distribution: %{?_distribution:%{_distribution}}%{!?_distribution:%{_vendor}}
-URL: http://www.enlightenment.org/
-BuildRequires: libjpeg-devel zlib-devel
-BuildRoot: %{_tmppath}/%{name}-%{version}-root
-
-%description
-Eet is a tiny library designed to write an arbitrary set of chunks of
-data to a file and optionally compress each chunk (very much like a
-zip file) and allow fast random-access reading of the file later
-on. It does not do zip as a zip itself has more complexity than is
-needed, and it was much simpler to implement this once here.
-
-It also can encode and decode data structures in memory, as well as
-image data for saving to eet files or sending across the network to
-other machines, or just writing to arbitrary files on the system. All
-data is encoded in a platform independent way and can be written and
-read by any architecture.
-
-%package devel
-Summary: Eet headers, static libraries, documentation and test programs
-Group: System Environment/Libraries
-Requires: %{name} = %{version}
-Requires: libjpeg-devel, zlib-devel
-
-%description devel
-Headers, static libraries, test programs and documentation for Eet
-
-%prep
-%setup -q
-
-%build
-%{configure} --prefix=%{_prefix}
-### use this if you have build problems
-#./configure --prefix=%{_prefix}
-%{__make} %{?_smp_mflags} %{?mflags}
-
-%install
-%{__make} %{?mflags_install} DESTDIR=$RPM_BUILD_ROOT install
-
-%clean
-test "x$RPM_BUILD_ROOT" != "x/" && rm -rf $RPM_BUILD_ROOT
-
-%post
-/sbin/ldconfig
-
-%postun
-/sbin/ldconfig
-
-%files
-%defattr(-, root, root)
-%doc AUTHORS COPYING COPYING-PLAIN README
-%{_libdir}/*.so.*
-
-%files devel
-%defattr(-, root, root)
-%{_bindir}/eet*
-%{_libdir}/pkgconfig/*
-%{_includedir}/*
-%{_libdir}/*.a
-%{_libdir}/*.so
-%{_datadir}/eet
-%{_libdir}/*.la
-
-%changelog
diff --git a/libraries/eet/eet.spec.in b/libraries/eet/eet.spec.in
deleted file mode 100644
index 5a91f60..0000000
--- a/libraries/eet/eet.spec.in
+++ /dev/null
@@ -1,76 +0,0 @@
-%{!?_rel:%{expand:%%global _rel 0.enl%{?dist}}}
-%define _missing_doc_files_terminate_build 0
-
-Summary: Library for speedy data storage, retrieval, and compression.
-Name: @PACKAGE@
-Version: @VERSION@
-Release: %{_rel}
-License: BSD
-Group: System Environment/Libraries
-Source: http://download.enlightenment.org/releases/%{name}-%{version}.tar.gz
-Packager: %{?_packager:%{_packager}}%{!?_packager:Michael Jennings <mej@eterm.org>}
-Vendor: %{?_vendorinfo:%{_vendorinfo}}%{!?_vendorinfo:The Enlightenment Project (http://www.enlightenment.org/)}
-Distribution: %{?_distribution:%{_distribution}}%{!?_distribution:%{_vendor}}
-URL: http://www.enlightenment.org/
-BuildRequires: libjpeg-devel zlib-devel
-BuildRoot: %{_tmppath}/%{name}-%{version}-root
-
-%description
-Eet is a tiny library designed to write an arbitrary set of chunks of
-data to a file and optionally compress each chunk (very much like a
-zip file) and allow fast random-access reading of the file later
-on. It does not do zip as a zip itself has more complexity than is
-needed, and it was much simpler to implement this once here.
-
-It also can encode and decode data structures in memory, as well as
-image data for saving to eet files or sending across the network to
-other machines, or just writing to arbitrary files on the system. All
-data is encoded in a platform independent way and can be written and
-read by any architecture.
-
-%package devel
-Summary: Eet headers, static libraries, documentation and test programs
-Group: System Environment/Libraries
-Requires: %{name} = %{version}
-Requires: libjpeg-devel, zlib-devel
-
-%description devel
-Headers, static libraries, test programs and documentation for Eet
-
-%prep
-%setup -q
-
-%build
-%{configure} --prefix=%{_prefix}
-### use this if you have build problems
-#./configure --prefix=%{_prefix}
-%{__make} %{?_smp_mflags} %{?mflags}
-
-%install
-%{__make} %{?mflags_install} DESTDIR=$RPM_BUILD_ROOT install
-
-%clean
-test "x$RPM_BUILD_ROOT" != "x/" && rm -rf $RPM_BUILD_ROOT
-
-%post
-/sbin/ldconfig
-
-%postun
-/sbin/ldconfig
-
-%files
-%defattr(-, root, root)
-%doc AUTHORS COPYING COPYING-PLAIN README
-%{_libdir}/*.so.*
-
-%files devel
-%defattr(-, root, root)
-%{_bindir}/eet*
-%{_libdir}/pkgconfig/*
-%{_includedir}/*
-%{_libdir}/*.a
-%{_libdir}/*.so
-%{_datadir}/eet
-%{_libdir}/*.la
-
-%changelog
diff --git a/libraries/eet/install-sh b/libraries/eet/install-sh
deleted file mode 100755
index 6781b98..0000000
--- a/libraries/eet/install-sh
+++ /dev/null
@@ -1,520 +0,0 @@
-#!/bin/sh
-# install - install a program, script, or datafile
-
-scriptversion=2009-04-28.21; # UTC
-
-# This originates from X11R5 (mit/util/scripts/install.sh), which was
-# later released in X11R6 (xc/config/util/install.sh) with the
-# following copyright and license.
-#
-# Copyright (C) 1994 X Consortium
-#
-# Permission is hereby granted, free of charge, to any person obtaining a copy
-# of this software and associated documentation files (the "Software"), to
-# deal in the Software without restriction, including without limitation the
-# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
-# sell copies of the Software, and to permit persons to whom the Software is
-# furnished to do so, subject to the following conditions:
-#
-# The above copyright notice and this permission notice shall be included in
-# all copies or substantial portions of the Software.
-#
-# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL THE
-# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
-# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
-# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
-#
-# Except as contained in this notice, the name of the X Consortium shall not
-# be used in advertising or otherwise to promote the sale, use or other deal-
-# ings in this Software without prior written authorization from the X Consor-
-# tium.
-#
-#
-# FSF changes to this file are in the public domain.
-#
-# Calling this script install-sh is preferred over install.sh, to prevent
-# `make' implicit rules from creating a file called install from it
-# when there is no Makefile.
-#
-# This script is compatible with the BSD install script, but was written
-# from scratch.
-
-nl='
-'
-IFS=" ""        $nl"
-
-# set DOITPROG to echo to test this script
-
-# Don't use :- since 4.3BSD and earlier shells don't like it.
-doit=${DOITPROG-}
-if test -z "$doit"; then
-  doit_exec=exec
-else
-  doit_exec=$doit
-fi
-
-# Put in absolute file names if you don't have them in your path;
-# or use environment vars.
-
-chgrpprog=${CHGRPPROG-chgrp}
-chmodprog=${CHMODPROG-chmod}
-chownprog=${CHOWNPROG-chown}
-cmpprog=${CMPPROG-cmp}
-cpprog=${CPPROG-cp}
-mkdirprog=${MKDIRPROG-mkdir}
-mvprog=${MVPROG-mv}
-rmprog=${RMPROG-rm}
-stripprog=${STRIPPROG-strip}
-
-posix_glob='?'
-initialize_posix_glob='
-  test "$posix_glob" != "?" || {
-    if (set -f) 2>/dev/null; then
-      posix_glob=
-    else
-      posix_glob=:
-    fi
-  }
-'
-
-posix_mkdir=
-
-# Desired mode of installed file.
-mode=0755
-
-chgrpcmd=
-chmodcmd=$chmodprog
-chowncmd=
-mvcmd=$mvprog
-rmcmd="$rmprog -f"
-stripcmd=
-
-src=
-dst=
-dir_arg=
-dst_arg=
-
-copy_on_change=false
-no_target_directory=
-
-usage="\
-Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
-   or: $0 [OPTION]... SRCFILES... DIRECTORY
-   or: $0 [OPTION]... -t DIRECTORY SRCFILES...
-   or: $0 [OPTION]... -d DIRECTORIES...
-
-In the 1st form, copy SRCFILE to DSTFILE.
-In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
-In the 4th, create DIRECTORIES.
-
-Options:
-     --help     display this help and exit.
-     --version  display version info and exit.
-
-  -c            (ignored)
-  -C            install only if different (preserve the last data modification time)
-  -d            create directories instead of installing files.
-  -g GROUP      $chgrpprog installed files to GROUP.
-  -m MODE       $chmodprog installed files to MODE.
-  -o USER       $chownprog installed files to USER.
-  -s            $stripprog installed files.
-  -t DIRECTORY  install into DIRECTORY.
-  -T            report an error if DSTFILE is a directory.
-
-Environment variables override the default commands:
-  CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG
-  RMPROG STRIPPROG
-"
-
-while test $# -ne 0; do
-  case $1 in
-    -c) ;;
-
-    -C) copy_on_change=true;;
-
-    -d) dir_arg=true;;
-
-    -g) chgrpcmd="$chgrpprog $2"
-        shift;;
-
-    --help) echo "$usage"; exit $?;;
-
-    -m) mode=$2
-        case $mode in
-          *' '* | *'    '* | *'
-'*        | *'*'* | *'?'* | *'['*)
-            echo "$0: invalid mode: $mode" >&2
-            exit 1;;
-        esac
-        shift;;
-
-    -o) chowncmd="$chownprog $2"
-        shift;;
-
-    -s) stripcmd=$stripprog;;
-
-    -t) dst_arg=$2
-        shift;;
-
-    -T) no_target_directory=true;;
-
-    --version) echo "$0 $scriptversion"; exit $?;;
-
-    --) shift
-        break;;
-
-    -*) echo "$0: invalid option: $1" >&2
-        exit 1;;
-
-    *)  break;;
-  esac
-  shift
-done
-
-if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
-  # When -d is used, all remaining arguments are directories to create.
-  # When -t is used, the destination is already specified.
-  # Otherwise, the last argument is the destination.  Remove it from $@.
-  for arg
-  do
-    if test -n "$dst_arg"; then
-      # $@ is not empty: it contains at least $arg.
-      set fnord "$@" "$dst_arg"
-      shift # fnord
-    fi
-    shift # arg
-    dst_arg=$arg
-  done
-fi
-
-if test $# -eq 0; then
-  if test -z "$dir_arg"; then
-    echo "$0: no input file specified." >&2
-    exit 1
-  fi
-  # It's OK to call `install-sh -d' without argument.
-  # This can happen when creating conditional directories.
-  exit 0
-fi
-
-if test -z "$dir_arg"; then
-  trap '(exit $?); exit' 1 2 13 15
-
-  # Set umask so as not to create temps with too-generous modes.
-  # However, 'strip' requires both read and write access to temps.
-  case $mode in
-    # Optimize common cases.
-    *644) cp_umask=133;;
-    *755) cp_umask=22;;
-
-    *[0-7])
-      if test -z "$stripcmd"; then
-        u_plus_rw=
-      else
-        u_plus_rw='% 200'
-      fi
-      cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
-    *)
-      if test -z "$stripcmd"; then
-        u_plus_rw=
-      else
-        u_plus_rw=,u+rw
-      fi
-      cp_umask=$mode$u_plus_rw;;
-  esac
-fi
-
-for src
-do
-  # Protect names starting with `-'.
-  case $src in
-    -*) src=./$src;;
-  esac
-
-  if test -n "$dir_arg"; then
-    dst=$src
-    dstdir=$dst
-    test -d "$dstdir"
-    dstdir_status=$?
-  else
-
-    # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
-    # might cause directories to be created, which would be especially bad
-    # if $src (and thus $dsttmp) contains '*'.
-    if test ! -f "$src" && test ! -d "$src"; then
-      echo "$0: $src does not exist." >&2
-      exit 1
-    fi
-
-    if test -z "$dst_arg"; then
-      echo "$0: no destination specified." >&2
-      exit 1
-    fi
-
-    dst=$dst_arg
-    # Protect names starting with `-'.
-    case $dst in
-      -*) dst=./$dst;;
-    esac
-
-    # If destination is a directory, append the input filename; won't work
-    # if double slashes aren't ignored.
-    if test -d "$dst"; then
-      if test -n "$no_target_directory"; then
-        echo "$0: $dst_arg: Is a directory" >&2
-        exit 1
-      fi
-      dstdir=$dst
-      dst=$dstdir/`basename "$src"`
-      dstdir_status=0
-    else
-      # Prefer dirname, but fall back on a substitute if dirname fails.
-      dstdir=`
-        (dirname "$dst") 2>/dev/null ||
-        expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-             X"$dst" : 'X\(//\)[^/]' \| \
-             X"$dst" : 'X\(//\)$' \| \
-             X"$dst" : 'X\(/\)' \| . 2>/dev/null ||
-        echo X"$dst" |
-            sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-                   s//\1/
-                   q
-                 }
-                 /^X\(\/\/\)[^/].*/{
-                   s//\1/
-                   q
-                 }
-                 /^X\(\/\/\)$/{
-                   s//\1/
-                   q
-                 }
-                 /^X\(\/\).*/{
-                   s//\1/
-                   q
-                 }
-                 s/.*/./; q'
-      `
-
-      test -d "$dstdir"
-      dstdir_status=$?
-    fi
-  fi
-
-  obsolete_mkdir_used=false
-
-  if test $dstdir_status != 0; then
-    case $posix_mkdir in
-      '')
-        # Create intermediate dirs using mode 755 as modified by the umask.
-        # This is like FreeBSD 'install' as of 1997-10-28.
-        umask=`umask`
-        case $stripcmd.$umask in
-          # Optimize common cases.
-          *[2367][2367]) mkdir_umask=$umask;;
-          .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
-
-          *[0-7])
-            mkdir_umask=`expr $umask + 22 \
-              - $umask % 100 % 40 + $umask % 20 \
-              - $umask % 10 % 4 + $umask % 2
-            `;;
-          *) mkdir_umask=$umask,go-w;;
-        esac
-
-        # With -d, create the new directory with the user-specified mode.
-        # Otherwise, rely on $mkdir_umask.
-        if test -n "$dir_arg"; then
-          mkdir_mode=-m$mode
-        else
-          mkdir_mode=
-        fi
-
-        posix_mkdir=false
-        case $umask in
-          *[123567][0-7][0-7])
-            # POSIX mkdir -p sets u+wx bits regardless of umask, which
-            # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
-            ;;
-          *)
-            tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
-            trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0
-
-            if (umask $mkdir_umask &&
-                exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
-            then
-              if test -z "$dir_arg" || {
-                   # Check for POSIX incompatibilities with -m.
-                   # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
-                   # other-writeable bit of parent directory when it shouldn't.
-                   # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
-                   ls_ld_tmpdir=`ls -ld "$tmpdir"`
-                   case $ls_ld_tmpdir in
-                     d????-?r-*) different_mode=700;;
-                     d????-?--*) different_mode=755;;
-                     *) false;;
-                   esac &&
-                   $mkdirprog -m$different_mode -p -- "$tmpdir" && {
-                     ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
-                     test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
-                   }
-                 }
-              then posix_mkdir=:
-              fi
-              rmdir "$tmpdir/d" "$tmpdir"
-            else
-              # Remove any dirs left behind by ancient mkdir implementations.
-              rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
-            fi
-            trap '' 0;;
-        esac;;
-    esac
-
-    if
-      $posix_mkdir && (
-        umask $mkdir_umask &&
-        $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
-      )
-    then :
-    else
-
-      # The umask is ridiculous, or mkdir does not conform to POSIX,
-      # or it failed possibly due to a race condition.  Create the
-      # directory the slow way, step by step, checking for races as we go.
-
-      case $dstdir in
-        /*) prefix='/';;
-        -*) prefix='./';;
-        *)  prefix='';;
-      esac
-
-      eval "$initialize_posix_glob"
-
-      oIFS=$IFS
-      IFS=/
-      $posix_glob set -f
-      set fnord $dstdir
-      shift
-      $posix_glob set +f
-      IFS=$oIFS
-
-      prefixes=
-
-      for d
-      do
-        test -z "$d" && continue
-
-        prefix=$prefix$d
-        if test -d "$prefix"; then
-          prefixes=
-        else
-          if $posix_mkdir; then
-            (umask=$mkdir_umask &&
-             $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
-            # Don't fail if two instances are running concurrently.
-            test -d "$prefix" || exit 1
-          else
-            case $prefix in
-              *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
-              *) qprefix=$prefix;;
-            esac
-            prefixes="$prefixes '$qprefix'"
-          fi
-        fi
-        prefix=$prefix/
-      done
-
-      if test -n "$prefixes"; then
-        # Don't fail if two instances are running concurrently.
-        (umask $mkdir_umask &&
-         eval "\$doit_exec \$mkdirprog $prefixes") ||
-          test -d "$dstdir" || exit 1
-        obsolete_mkdir_used=true
-      fi
-    fi
-  fi
-
-  if test -n "$dir_arg"; then
-    { test -z "$chowncmd" || $doit $chowncmd "$dst"; } &&
-    { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } &&
-    { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false ||
-      test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1
-  else
-
-    # Make a couple of temp file names in the proper directory.
-    dsttmp=$dstdir/_inst.$$_
-    rmtmp=$dstdir/_rm.$$_
-
-    # Trap to clean up those temp files at exit.
-    trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
-
-    # Copy the file name to the temp name.
-    (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") &&
-
-    # and set any options; do chmod last to preserve setuid bits.
-    #
-    # If any of these fail, we abort the whole thing.  If we want to
-    # ignore errors from any of these, just make sure not to ignore
-    # errors from the above "$doit $cpprog $src $dsttmp" command.
-    #
-    { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } &&
-    { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } &&
-    { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } &&
-    { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&
-
-    # If -C, don't bother to copy if it wouldn't change the file.
-    if $copy_on_change &&
-       old=`LC_ALL=C ls -dlL "$dst"     2>/dev/null` &&
-       new=`LC_ALL=C ls -dlL "$dsttmp"  2>/dev/null` &&
-
-       eval "$initialize_posix_glob" &&
-       $posix_glob set -f &&
-       set X $old && old=:$2:$4:$5:$6 &&
-       set X $new && new=:$2:$4:$5:$6 &&
-       $posix_glob set +f &&
-
-       test "$old" = "$new" &&
-       $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1
-    then
-      rm -f "$dsttmp"
-    else
-      # Rename the file to the real destination.
-      $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null ||
-
-      # The rename failed, perhaps because mv can't rename something else
-      # to itself, or perhaps because mv is so ancient that it does not
-      # support -f.
-      {
-        # Now remove or move aside any old file at destination location.
-        # We try this two ways since rm can't unlink itself on some
-        # systems and the destination file might be busy for other
-        # reasons.  In this case, the final cleanup might fail but the new
-        # file should still install successfully.
-        {
-          test ! -f "$dst" ||
-          $doit $rmcmd -f "$dst" 2>/dev/null ||
-          { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
-            { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }
-          } ||
-          { echo "$0: cannot unlink or rename $dst" >&2
-            (exit 1); exit 1
-          }
-        } &&
-
-        # Now rename the file to the real destination.
-        $doit $mvcmd "$dsttmp" "$dst"
-      }
-    fi || exit 1
-
-    trap '' 0
-  fi
-done
-
-# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC"
-# time-stamp-end: "; # UTC"
-# End:
diff --git a/libraries/eet/ltmain.sh b/libraries/eet/ltmain.sh
deleted file mode 100755
index fa4b1e1..0000000
--- a/libraries/eet/ltmain.sh
+++ /dev/null
@@ -1,8413 +0,0 @@
-# Generated from ltmain.m4sh.
-
-# ltmain.sh (GNU libtool) 2.2.6b
-# Written by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
-
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006, 2007 2008 Free Software Foundation, Inc.
-# This is free software; see the source for copying conditions.  There is NO
-# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-
-# GNU Libtool is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# As a special exception to the GNU General Public License,
-# if you distribute this file as part of a program or library that
-# is built using GNU Libtool, you may include this file under the
-# same distribution terms that you use for the rest of that program.
-#
-# GNU Libtool is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with GNU Libtool; see the file COPYING.  If not, a copy
-# can be downloaded from http://www.gnu.org/licenses/gpl.html,
-# or obtained by writing to the Free Software Foundation, Inc.,
-# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-
-# Usage: $progname [OPTION]... [MODE-ARG]...
-#
-# Provide generalized library-building support services.
-#
-#     --config             show all configuration variables
-#     --debug              enable verbose shell tracing
-# -n, --dry-run            display commands without modifying any files
-#     --features           display basic configuration information and exit
-#     --mode=MODE          use operation mode MODE
-#     --preserve-dup-deps  don't remove duplicate dependency libraries
-#     --quiet, --silent    don't print informational messages
-#     --tag=TAG            use configuration variables from tag TAG
-# -v, --verbose            print informational messages (default)
-#     --version            print version information
-# -h, --help               print short or long help message
-#
-# MODE must be one of the following:
-#
-#       clean              remove files from the build directory
-#       compile            compile a source file into a libtool object
-#       execute            automatically set library path, then run a program
-#       finish             complete the installation of libtool libraries
-#       install            install libraries or executables
-#       link               create a library or an executable
-#       uninstall          remove libraries from an installed directory
-#
-# MODE-ARGS vary depending on the MODE.
-# Try `$progname --help --mode=MODE' for a more detailed description of MODE.
-#
-# When reporting a bug, please describe a test case to reproduce it and
-# include the following information:
-#
-#       host-triplet:   $host
-#       shell:          $SHELL
-#       compiler:               $LTCC
-#       compiler flags:         $LTCFLAGS
-#       linker:         $LD (gnu? $with_gnu_ld)
-#       $progname:              (GNU libtool) 2.2.6b Debian-2.2.6b-2ubuntu3
-#       automake:               $automake_version
-#       autoconf:               $autoconf_version
-#
-# Report bugs to <bug-libtool@gnu.org>.
-
-PROGRAM=ltmain.sh
-PACKAGE=libtool
-VERSION="2.2.6b Debian-2.2.6b-2ubuntu3"
-TIMESTAMP=""
-package_revision=1.3017
-
-# Be Bourne compatible
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
-  emulate sh
-  NULLCMD=:
-  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
-  # is contrary to our usage.  Disable this feature.
-  alias -g '${1+"$@"}'='"$@"'
-  setopt NO_GLOB_SUBST
-else
-  case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac
-fi
-BIN_SH=xpg4; export BIN_SH # for Tru64
-DUALCASE=1; export DUALCASE # for MKS sh
-
-# NLS nuisances: We save the old values to restore during execute mode.
-# Only set LANG and LC_ALL to C if already set.
-# These must not be set unconditionally because not all systems understand
-# e.g. LANG=C (notably SCO).
-lt_user_locale=
-lt_safe_locale=
-for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
-do
-  eval "if test \"\${$lt_var+set}\" = set; then
-          save_$lt_var=\$$lt_var
-          $lt_var=C
-          export $lt_var
-          lt_user_locale=\"$lt_var=\\\$save_\$lt_var; \$lt_user_locale\"
-          lt_safe_locale=\"$lt_var=C; \$lt_safe_locale\"
-        fi"
-done
-
-$lt_unset CDPATH
-
-
-
-
-
-: ${CP="cp -f"}
-: ${ECHO="echo"}
-: ${EGREP="/bin/grep -E"}
-: ${FGREP="/bin/grep -F"}
-: ${GREP="/bin/grep"}
-: ${LN_S="ln -s"}
-: ${MAKE="make"}
-: ${MKDIR="mkdir"}
-: ${MV="mv -f"}
-: ${RM="rm -f"}
-: ${SED="/bin/sed"}
-: ${SHELL="${CONFIG_SHELL-/bin/sh}"}
-: ${Xsed="$SED -e 1s/^X//"}
-
-# Global variables:
-EXIT_SUCCESS=0
-EXIT_FAILURE=1
-EXIT_MISMATCH=63  # $? = 63 is used to indicate version mismatch to missing.
-EXIT_SKIP=77      # $? = 77 is used to indicate a skipped test to automake.
-
-exit_status=$EXIT_SUCCESS
-
-# Make sure IFS has a sensible default
-lt_nl='
-'
-IFS="   $lt_nl"
-
-dirname="s,/[^/]*$,,"
-basename="s,^.*/,,"
-
-# func_dirname_and_basename file append nondir_replacement
-# perform func_basename and func_dirname in a single function
-# call:
-#   dirname:  Compute the dirname of FILE.  If nonempty,
-#             add APPEND to the result, otherwise set result
-#             to NONDIR_REPLACEMENT.
-#             value returned in "$func_dirname_result"
-#   basename: Compute filename of FILE.
-#             value retuned in "$func_basename_result"
-# Implementation must be kept synchronized with func_dirname
-# and func_basename. For efficiency, we do not delegate to
-# those functions but instead duplicate the functionality here.
-func_dirname_and_basename ()
-{
-  # Extract subdirectory from the argument.
-  func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"`
-  if test "X$func_dirname_result" = "X${1}"; then
-    func_dirname_result="${3}"
-  else
-    func_dirname_result="$func_dirname_result${2}"
-  fi
-  func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"`
-}
-
-# Generated shell functions inserted here.
-
-# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
-# is ksh but when the shell is invoked as "sh" and the current value of
-# the _XPG environment variable is not equal to 1 (one), the special
-# positional parameter $0, within a function call, is the name of the
-# function.
-progpath="$0"
-
-# The name of this program:
-# In the unlikely event $progname began with a '-', it would play havoc with
-# func_echo (imagine progname=-n), so we prepend ./ in that case:
-func_dirname_and_basename "$progpath"
-progname=$func_basename_result
-case $progname in
-  -*) progname=./$progname ;;
-esac
-
-# Make sure we have an absolute path for reexecution:
-case $progpath in
-  [\\/]*|[A-Za-z]:\\*) ;;
-  *[\\/]*)
-     progdir=$func_dirname_result
-     progdir=`cd "$progdir" && pwd`
-     progpath="$progdir/$progname"
-     ;;
-  *)
-     save_IFS="$IFS"
-     IFS=:
-     for progdir in $PATH; do
-       IFS="$save_IFS"
-       test -x "$progdir/$progname" && break
-     done
-     IFS="$save_IFS"
-     test -n "$progdir" || progdir=`pwd`
-     progpath="$progdir/$progname"
-     ;;
-esac
-
-# Sed substitution that helps us do robust quoting.  It backslashifies
-# metacharacters that are still active within double-quoted strings.
-Xsed="${SED}"' -e 1s/^X//'
-sed_quote_subst='s/\([`"$\\]\)/\\\1/g'
-
-# Same as above, but do not quote variable references.
-double_quote_subst='s/\(["`\\]\)/\\\1/g'
-
-# Re-`\' parameter expansions in output of double_quote_subst that were
-# `\'-ed in input to the same.  If an odd number of `\' preceded a '$'
-# in input to double_quote_subst, that '$' was protected from expansion.
-# Since each input `\' is now two `\'s, look for any number of runs of
-# four `\'s followed by two `\'s and then a '$'.  `\' that '$'.
-bs='\\'
-bs2='\\\\'
-bs4='\\\\\\\\'
-dollar='\$'
-sed_double_backslash="\
-  s/$bs4/&\\
-/g
-  s/^$bs2$dollar/$bs&/
-  s/\\([^$bs]\\)$bs2$dollar/\\1$bs2$bs$dollar/g
-  s/\n//g"
-
-# Standard options:
-opt_dry_run=false
-opt_help=false
-opt_quiet=false
-opt_verbose=false
-opt_warning=:
-
-# func_echo arg...
-# Echo program name prefixed message, along with the current mode
-# name if it has been set yet.
-func_echo ()
-{
-    $ECHO "$progname${mode+: }$mode: $*"
-}
-
-# func_verbose arg...
-# Echo program name prefixed message in verbose mode only.
-func_verbose ()
-{
-    $opt_verbose && func_echo ${1+"$@"}
-
-    # A bug in bash halts the script if the last line of a function
-    # fails when set -e is in force, so we need another command to
-    # work around that:
-    :
-}
-
-# func_error arg...
-# Echo program name prefixed message to standard error.
-func_error ()
-{
-    $ECHO "$progname${mode+: }$mode: "${1+"$@"} 1>&2
-}
-
-# func_warning arg...
-# Echo program name prefixed warning message to standard error.
-func_warning ()
-{
-    $opt_warning && $ECHO "$progname${mode+: }$mode: warning: "${1+"$@"} 1>&2
-
-    # bash bug again:
-    :
-}
-
-# func_fatal_error arg...
-# Echo program name prefixed message to standard error, and exit.
-func_fatal_error ()
-{
-    func_error ${1+"$@"}
-    exit $EXIT_FAILURE
-}
-
-# func_fatal_help arg...
-# Echo program name prefixed message to standard error, followed by
-# a help hint, and exit.
-func_fatal_help ()
-{
-    func_error ${1+"$@"}
-    func_fatal_error "$help"
-}
-help="Try \`$progname --help' for more information."  ## default
-
-
-# func_grep expression filename
-# Check whether EXPRESSION matches any line of FILENAME, without output.
-func_grep ()
-{
-    $GREP "$1" "$2" >/dev/null 2>&1
-}
-
-
-# func_mkdir_p directory-path
-# Make sure the entire path to DIRECTORY-PATH is available.
-func_mkdir_p ()
-{
-    my_directory_path="$1"
-    my_dir_list=
-
-    if test -n "$my_directory_path" && test "$opt_dry_run" != ":"; then
-
-      # Protect directory names starting with `-'
-      case $my_directory_path in
-        -*) my_directory_path="./$my_directory_path" ;;
-      esac
-
-      # While some portion of DIR does not yet exist...
-      while test ! -d "$my_directory_path"; do
-        # ...make a list in topmost first order.  Use a colon delimited
-        # list incase some portion of path contains whitespace.
-        my_dir_list="$my_directory_path:$my_dir_list"
-
-        # If the last portion added has no slash in it, the list is done
-        case $my_directory_path in */*) ;; *) break ;; esac
-
-        # ...otherwise throw away the child directory and loop
-        my_directory_path=`$ECHO "X$my_directory_path" | $Xsed -e "$dirname"`
-      done
-      my_dir_list=`$ECHO "X$my_dir_list" | $Xsed -e 's,:*$,,'`
-
-      save_mkdir_p_IFS="$IFS"; IFS=':'
-      for my_dir in $my_dir_list; do
-        IFS="$save_mkdir_p_IFS"
-        # mkdir can fail with a `File exist' error if two processes
-        # try to create one of the directories concurrently.  Don't
-        # stop in that case!
-        $MKDIR "$my_dir" 2>/dev/null || :
-      done
-      IFS="$save_mkdir_p_IFS"
-
-      # Bail out if we (or some other process) failed to create a directory.
-      test -d "$my_directory_path" || \
-        func_fatal_error "Failed to create \`$1'"
-    fi
-}
-
-
-# func_mktempdir [string]
-# Make a temporary directory that won't clash with other running
-# libtool processes, and avoids race conditions if possible.  If
-# given, STRING is the basename for that directory.
-func_mktempdir ()
-{
-    my_template="${TMPDIR-/tmp}/${1-$progname}"
-
-    if test "$opt_dry_run" = ":"; then
-      # Return a directory name, but don't create it in dry-run mode
-      my_tmpdir="${my_template}-$$"
-    else
-
-      # If mktemp works, use that first and foremost
-      my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null`
-
-      if test ! -d "$my_tmpdir"; then
-        # Failing that, at least try and use $RANDOM to avoid a race
-        my_tmpdir="${my_template}-${RANDOM-0}$$"
-
-        save_mktempdir_umask=`umask`
-        umask 0077
-        $MKDIR "$my_tmpdir"
-        umask $save_mktempdir_umask
-      fi
-
-      # If we're not in dry-run mode, bomb out on failure
-      test -d "$my_tmpdir" || \
-        func_fatal_error "cannot create temporary directory \`$my_tmpdir'"
-    fi
-
-    $ECHO "X$my_tmpdir" | $Xsed
-}
-
-
-# func_quote_for_eval arg
-# Aesthetically quote ARG to be evaled later.
-# This function returns two values: FUNC_QUOTE_FOR_EVAL_RESULT
-# is double-quoted, suitable for a subsequent eval, whereas
-# FUNC_QUOTE_FOR_EVAL_UNQUOTED_RESULT has merely all characters
-# which are still active within double quotes backslashified.
-func_quote_for_eval ()
-{
-    case $1 in
-      *[\\\`\"\$]*)
-        func_quote_for_eval_unquoted_result=`$ECHO "X$1" | $Xsed -e "$sed_quote_subst"` ;;
-      *)
-        func_quote_for_eval_unquoted_result="$1" ;;
-    esac
-
-    case $func_quote_for_eval_unquoted_result in
-      # Double-quote args containing shell metacharacters to delay
-      # word splitting, command substitution and and variable
-      # expansion for a subsequent eval.
-      # Many Bourne shells cannot handle close brackets correctly
-      # in scan sets, so we specify it separately.
-      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \     ]*|*]*|"")
-        func_quote_for_eval_result="\"$func_quote_for_eval_unquoted_result\""
-        ;;
-      *)
-        func_quote_for_eval_result="$func_quote_for_eval_unquoted_result"
-    esac
-}
-
-
-# func_quote_for_expand arg
-# Aesthetically quote ARG to be evaled later; same as above,
-# but do not quote variable references.
-func_quote_for_expand ()
-{
-    case $1 in
-      *[\\\`\"]*)
-        my_arg=`$ECHO "X$1" | $Xsed \
-            -e "$double_quote_subst" -e "$sed_double_backslash"` ;;
-      *)
-        my_arg="$1" ;;
-    esac
-
-    case $my_arg in
-      # Double-quote args containing shell metacharacters to delay
-      # word splitting and command substitution for a subsequent eval.
-      # Many Bourne shells cannot handle close brackets correctly
-      # in scan sets, so we specify it separately.
-      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \     ]*|*]*|"")
-        my_arg="\"$my_arg\""
-        ;;
-    esac
-
-    func_quote_for_expand_result="$my_arg"
-}
-
-
-# func_show_eval cmd [fail_exp]
-# Unless opt_silent is true, then output CMD.  Then, if opt_dryrun is
-# not true, evaluate CMD.  If the evaluation of CMD fails, and FAIL_EXP
-# is given, then evaluate it.
-func_show_eval ()
-{
-    my_cmd="$1"
-    my_fail_exp="${2-:}"
-
-    ${opt_silent-false} || {
-      func_quote_for_expand "$my_cmd"
-      eval "func_echo $func_quote_for_expand_result"
-    }
-
-    if ${opt_dry_run-false}; then :; else
-      eval "$my_cmd"
-      my_status=$?
-      if test "$my_status" -eq 0; then :; else
-        eval "(exit $my_status); $my_fail_exp"
-      fi
-    fi
-}
-
-
-# func_show_eval_locale cmd [fail_exp]
-# Unless opt_silent is true, then output CMD.  Then, if opt_dryrun is
-# not true, evaluate CMD.  If the evaluation of CMD fails, and FAIL_EXP
-# is given, then evaluate it.  Use the saved locale for evaluation.
-func_show_eval_locale ()
-{
-    my_cmd="$1"
-    my_fail_exp="${2-:}"
-
-    ${opt_silent-false} || {
-      func_quote_for_expand "$my_cmd"
-      eval "func_echo $func_quote_for_expand_result"
-    }
-
-    if ${opt_dry_run-false}; then :; else
-      eval "$lt_user_locale
-            $my_cmd"
-      my_status=$?
-      eval "$lt_safe_locale"
-      if test "$my_status" -eq 0; then :; else
-        eval "(exit $my_status); $my_fail_exp"
-      fi
-    fi
-}
-
-
-
-
-
-# func_version
-# Echo version message to standard output and exit.
-func_version ()
-{
-    $SED -n '/^# '$PROGRAM' (GNU /,/# warranty; / {
-        s/^# //
-        s/^# *$//
-        s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/
-        p
-     }' < "$progpath"
-     exit $?
-}
-
-# func_usage
-# Echo short help message to standard output and exit.
-func_usage ()
-{
-    $SED -n '/^# Usage:/,/# -h/ {
-        s/^# //
-        s/^# *$//
-        s/\$progname/'$progname'/
-        p
-    }' < "$progpath"
-    $ECHO
-    $ECHO "run \`$progname --help | more' for full usage"
-    exit $?
-}
-
-# func_help
-# Echo long help message to standard output and exit.
-func_help ()
-{
-    $SED -n '/^# Usage:/,/# Report bugs to/ {
-        s/^# //
-        s/^# *$//
-        s*\$progname*'$progname'*
-        s*\$host*'"$host"'*
-        s*\$SHELL*'"$SHELL"'*
-        s*\$LTCC*'"$LTCC"'*
-        s*\$LTCFLAGS*'"$LTCFLAGS"'*
-        s*\$LD*'"$LD"'*
-        s/\$with_gnu_ld/'"$with_gnu_ld"'/
-        s/\$automake_version/'"`(automake --version) 2>/dev/null |$SED 1q`"'/
-        s/\$autoconf_version/'"`(autoconf --version) 2>/dev/null |$SED 1q`"'/
-        p
-     }' < "$progpath"
-    exit $?
-}
-
-# func_missing_arg argname
-# Echo program name prefixed message to standard error and set global
-# exit_cmd.
-func_missing_arg ()
-{
-    func_error "missing argument for $1"
-    exit_cmd=exit
-}
-
-exit_cmd=:
-
-
-
-
-
-# Check that we have a working $ECHO.
-if test "X$1" = X--no-reexec; then
-  # Discard the --no-reexec flag, and continue.
-  shift
-elif test "X$1" = X--fallback-echo; then
-  # Avoid inline document here, it may be left over
-  :
-elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t'; then
-  # Yippee, $ECHO works!
-  :
-else
-  # Restart under the correct shell, and then maybe $ECHO will work.
-  exec $SHELL "$progpath" --no-reexec ${1+"$@"}
-fi
-
-if test "X$1" = X--fallback-echo; then
-  # used as fallback echo
-  shift
-  cat <<EOF
-$*
-EOF
-  exit $EXIT_SUCCESS
-fi
-
-magic="%%%MAGIC variable%%%"
-magic_exe="%%%MAGIC EXE variable%%%"
-
-# Global variables.
-# $mode is unset
-nonopt=
-execute_dlfiles=
-preserve_args=
-lo2o="s/\\.lo\$/.${objext}/"
-o2lo="s/\\.${objext}\$/.lo/"
-extracted_archives=
-extracted_serial=0
-
-opt_dry_run=false
-opt_duplicate_deps=false
-opt_silent=false
-opt_debug=:
-
-# If this variable is set in any of the actions, the command in it
-# will be execed at the end.  This prevents here-documents from being
-# left over by shells.
-exec_cmd=
-
-# func_fatal_configuration arg...
-# Echo program name prefixed message to standard error, followed by
-# a configuration failure hint, and exit.
-func_fatal_configuration ()
-{
-    func_error ${1+"$@"}
-    func_error "See the $PACKAGE documentation for more information."
-    func_fatal_error "Fatal configuration error."
-}
-
-
-# func_config
-# Display the configuration for all the tags in this script.
-func_config ()
-{
-    re_begincf='^# ### BEGIN LIBTOOL'
-    re_endcf='^# ### END LIBTOOL'
-
-    # Default configuration.
-    $SED "1,/$re_begincf CONFIG/d;/$re_endcf CONFIG/,\$d" < "$progpath"
-
-    # Now print the configurations for the tags.
-    for tagname in $taglist; do
-      $SED -n "/$re_begincf TAG CONFIG: $tagname\$/,/$re_endcf TAG CONFIG: $tagname\$/p" < "$progpath"
-    done
-
-    exit $?
-}
-
-# func_features
-# Display the features supported by this script.
-func_features ()
-{
-    $ECHO "host: $host"
-    if test "$build_libtool_libs" = yes; then
-      $ECHO "enable shared libraries"
-    else
-      $ECHO "disable shared libraries"
-    fi
-    if test "$build_old_libs" = yes; then
-      $ECHO "enable static libraries"
-    else
-      $ECHO "disable static libraries"
-    fi
-
-    exit $?
-}
-
-# func_enable_tag tagname
-# Verify that TAGNAME is valid, and either flag an error and exit, or
-# enable the TAGNAME tag.  We also add TAGNAME to the global $taglist
-# variable here.
-func_enable_tag ()
-{
-  # Global variable:
-  tagname="$1"
-
-  re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$"
-  re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$"
-  sed_extractcf="/$re_begincf/,/$re_endcf/p"
-
-  # Validate tagname.
-  case $tagname in
-    *[!-_A-Za-z0-9,/]*)
-      func_fatal_error "invalid tag name: $tagname"
-      ;;
-  esac
-
-  # Don't test for the "default" C tag, as we know it's
-  # there but not specially marked.
-  case $tagname in
-    CC) ;;
-    *)
-      if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then
-        taglist="$taglist $tagname"
-
-        # Evaluate the configuration.  Be careful to quote the path
-        # and the sed script, to avoid splitting on whitespace, but
-        # also don't use non-portable quotes within backquotes within
-        # quotes we have to do it in 2 steps:
-        extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"`
-        eval "$extractedcf"
-      else
-        func_error "ignoring unknown tag $tagname"
-      fi
-      ;;
-  esac
-}
-
-# Parse options once, thoroughly.  This comes as soon as possible in
-# the script to make things like `libtool --version' happen quickly.
-{
-
-  # Shorthand for --mode=foo, only valid as the first argument
-  case $1 in
-  clean|clea|cle|cl)
-    shift; set dummy --mode clean ${1+"$@"}; shift
-    ;;
-  compile|compil|compi|comp|com|co|c)
-    shift; set dummy --mode compile ${1+"$@"}; shift
-    ;;
-  execute|execut|execu|exec|exe|ex|e)
-    shift; set dummy --mode execute ${1+"$@"}; shift
-    ;;
-  finish|finis|fini|fin|fi|f)
-    shift; set dummy --mode finish ${1+"$@"}; shift
-    ;;
-  install|instal|insta|inst|ins|in|i)
-    shift; set dummy --mode install ${1+"$@"}; shift
-    ;;
-  link|lin|li|l)
-    shift; set dummy --mode link ${1+"$@"}; shift
-    ;;
-  uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u)
-    shift; set dummy --mode uninstall ${1+"$@"}; shift
-    ;;
-  esac
-
-  # Parse non-mode specific arguments:
-  while test "$#" -gt 0; do
-    opt="$1"
-    shift
-
-    case $opt in
-      --config)         func_config                                     ;;
-
-      --debug)          preserve_args="$preserve_args $opt"
-                        func_echo "enabling shell trace mode"
-                        opt_debug='set -x'
-                        $opt_debug
-                        ;;
-
-      -dlopen)          test "$#" -eq 0 && func_missing_arg "$opt" && break
-                        execute_dlfiles="$execute_dlfiles $1"
-                        shift
-                        ;;
-
-      --dry-run | -n)   opt_dry_run=:                                   ;;
-      --features)       func_features                                   ;;
-      --finish)         mode="finish"                                   ;;
-
-      --mode)           test "$#" -eq 0 && func_missing_arg "$opt" && break
-                        case $1 in
-                          # Valid mode arguments:
-                          clean)        ;;
-                          compile)      ;;
-                          execute)      ;;
-                          finish)       ;;
-                          install)      ;;
-                          link)         ;;
-                          relink)       ;;
-                          uninstall)    ;;
-
-                          # Catch anything else as an error
-                          *) func_error "invalid argument for $opt"
-                             exit_cmd=exit
-                             break
-                             ;;
-                        esac
-
-                        mode="$1"
-                        shift
-                        ;;
-
-      --preserve-dup-deps)
-                        opt_duplicate_deps=:                            ;;
-
-      --quiet|--silent) preserve_args="$preserve_args $opt"
-                        opt_silent=:
-                        ;;
-
-      --verbose| -v)    preserve_args="$preserve_args $opt"
-                        opt_silent=false
-                        ;;
-
-      --tag)            test "$#" -eq 0 && func_missing_arg "$opt" && break
-                        preserve_args="$preserve_args $opt $1"
-                        func_enable_tag "$1"    # tagname is set here
-                        shift
-                        ;;
-
-      # Separate optargs to long options:
-      -dlopen=*|--mode=*|--tag=*)
-                        func_opt_split "$opt"
-                        set dummy "$func_opt_split_opt" "$func_opt_split_arg" ${1+"$@"}
-                        shift
-                        ;;
-
-      -\?|-h)           func_usage                                      ;;
-      --help)           opt_help=:                                      ;;
-      --version)        func_version                                    ;;
-
-      -*)               func_fatal_help "unrecognized option \`$opt'"   ;;
-
-      *)                nonopt="$opt"
-                        break
-                        ;;
-    esac
-  done
-
-
-  case $host in
-    *cygwin* | *mingw* | *pw32* | *cegcc*)
-      # don't eliminate duplications in $postdeps and $predeps
-      opt_duplicate_compiler_generated_deps=:
-      ;;
-    *)
-      opt_duplicate_compiler_generated_deps=$opt_duplicate_deps
-      ;;
-  esac
-
-  # Having warned about all mis-specified options, bail out if
-  # anything was wrong.
-  $exit_cmd $EXIT_FAILURE
-}
-
-# func_check_version_match
-# Ensure that we are using m4 macros, and libtool script from the same
-# release of libtool.
-func_check_version_match ()
-{
-  if test "$package_revision" != "$macro_revision"; then
-    if test "$VERSION" != "$macro_version"; then
-      if test -z "$macro_version"; then
-        cat >&2 <<_LT_EOF
-$progname: Version mismatch error.  This is $PACKAGE $VERSION, but the
-$progname: definition of this LT_INIT comes from an older release.
-$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
-$progname: and run autoconf again.
-_LT_EOF
-      else
-        cat >&2 <<_LT_EOF
-$progname: Version mismatch error.  This is $PACKAGE $VERSION, but the
-$progname: definition of this LT_INIT comes from $PACKAGE $macro_version.
-$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
-$progname: and run autoconf again.
-_LT_EOF
-      fi
-    else
-      cat >&2 <<_LT_EOF
-$progname: Version mismatch error.  This is $PACKAGE $VERSION, revision $package_revision,
-$progname: but the definition of this LT_INIT comes from revision $macro_revision.
-$progname: You should recreate aclocal.m4 with macros from revision $package_revision
-$progname: of $PACKAGE $VERSION and run autoconf again.
-_LT_EOF
-    fi
-
-    exit $EXIT_MISMATCH
-  fi
-}
-
-
-## ----------- ##
-##    Main.    ##
-## ----------- ##
-
-$opt_help || {
-  # Sanity checks first:
-  func_check_version_match
-
-  if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
-    func_fatal_configuration "not configured to build any kind of library"
-  fi
-
-  test -z "$mode" && func_fatal_error "error: you must specify a MODE."
-
-
-  # Darwin sucks
-  eval std_shrext=\"$shrext_cmds\"
-
-
-  # Only execute mode is allowed to have -dlopen flags.
-  if test -n "$execute_dlfiles" && test "$mode" != execute; then
-    func_error "unrecognized option \`-dlopen'"
-    $ECHO "$help" 1>&2
-    exit $EXIT_FAILURE
-  fi
-
-  # Change the help message to a mode-specific one.
-  generic_help="$help"
-  help="Try \`$progname --help --mode=$mode' for more information."
-}
-
-
-# func_lalib_p file
-# True iff FILE is a libtool `.la' library or `.lo' object file.
-# This function is only a basic sanity check; it will hardly flush out
-# determined imposters.
-func_lalib_p ()
-{
-    test -f "$1" &&
-      $SED -e 4q "$1" 2>/dev/null \
-        | $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1
-}
-
-# func_lalib_unsafe_p file
-# True iff FILE is a libtool `.la' library or `.lo' object file.
-# This function implements the same check as func_lalib_p without
-# resorting to external programs.  To this end, it redirects stdin and
-# closes it afterwards, without saving the original file descriptor.
-# As a safety measure, use it only where a negative result would be
-# fatal anyway.  Works if `file' does not exist.
-func_lalib_unsafe_p ()
-{
-    lalib_p=no
-    if test -f "$1" && test -r "$1" && exec 5<&0 <"$1"; then
-        for lalib_p_l in 1 2 3 4
-        do
-            read lalib_p_line
-            case "$lalib_p_line" in
-                \#\ Generated\ by\ *$PACKAGE* ) lalib_p=yes; break;;
-            esac
-        done
-        exec 0<&5 5<&-
-    fi
-    test "$lalib_p" = yes
-}
-
-# func_ltwrapper_script_p file
-# True iff FILE is a libtool wrapper script
-# This function is only a basic sanity check; it will hardly flush out
-# determined imposters.
-func_ltwrapper_script_p ()
-{
-    func_lalib_p "$1"
-}
-
-# func_ltwrapper_executable_p file
-# True iff FILE is a libtool wrapper executable
-# This function is only a basic sanity check; it will hardly flush out
-# determined imposters.
-func_ltwrapper_executable_p ()
-{
-    func_ltwrapper_exec_suffix=
-    case $1 in
-    *.exe) ;;
-    *) func_ltwrapper_exec_suffix=.exe ;;
-    esac
-    $GREP "$magic_exe" "$1$func_ltwrapper_exec_suffix" >/dev/null 2>&1
-}
-
-# func_ltwrapper_scriptname file
-# Assumes file is an ltwrapper_executable
-# uses $file to determine the appropriate filename for a
-# temporary ltwrapper_script.
-func_ltwrapper_scriptname ()
-{
-    func_ltwrapper_scriptname_result=""
-    if func_ltwrapper_executable_p "$1"; then
-        func_dirname_and_basename "$1" "" "."
-        func_stripname '' '.exe' "$func_basename_result"
-        func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper"
-    fi
-}
-
-# func_ltwrapper_p file
-# True iff FILE is a libtool wrapper script or wrapper executable
-# This function is only a basic sanity check; it will hardly flush out
-# determined imposters.
-func_ltwrapper_p ()
-{
-    func_ltwrapper_script_p "$1" || func_ltwrapper_executable_p "$1"
-}
-
-
-# func_execute_cmds commands fail_cmd
-# Execute tilde-delimited COMMANDS.
-# If FAIL_CMD is given, eval that upon failure.
-# FAIL_CMD may read-access the current command in variable CMD!
-func_execute_cmds ()
-{
-    $opt_debug
-    save_ifs=$IFS; IFS='~'
-    for cmd in $1; do
-      IFS=$save_ifs
-      eval cmd=\"$cmd\"
-      func_show_eval "$cmd" "${2-:}"
-    done
-    IFS=$save_ifs
-}
-
-
-# func_source file
-# Source FILE, adding directory component if necessary.
-# Note that it is not necessary on cygwin/mingw to append a dot to
-# FILE even if both FILE and FILE.exe exist: automatic-append-.exe
-# behavior happens only for exec(3), not for open(2)!  Also, sourcing
-# `FILE.' does not work on cygwin managed mounts.
-func_source ()
-{
-    $opt_debug
-    case $1 in
-    */* | *\\*) . "$1" ;;
-    *)          . "./$1" ;;
-    esac
-}
-
-
-# func_infer_tag arg
-# Infer tagged configuration to use if any are available and
-# if one wasn't chosen via the "--tag" command line option.
-# Only attempt this if the compiler in the base compile
-# command doesn't match the default compiler.
-# arg is usually of the form 'gcc ...'
-func_infer_tag ()
-{
-    $opt_debug
-    if test -n "$available_tags" && test -z "$tagname"; then
-      CC_quoted=
-      for arg in $CC; do
-        func_quote_for_eval "$arg"
-        CC_quoted="$CC_quoted $func_quote_for_eval_result"
-      done
-      case $@ in
-      # Blanks in the command may have been stripped by the calling shell,
-      # but not from the CC environment variable when configure was run.
-      " $CC "* | "$CC "* | " `$ECHO $CC` "* | "`$ECHO $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$ECHO $CC_quoted` "* | "`$ECHO $CC_quoted` "*) ;;
-      # Blanks at the start of $base_compile will cause this to fail
-      # if we don't check for them as well.
-      *)
-        for z in $available_tags; do
-          if $GREP "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then
-            # Evaluate the configuration.
-            eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`"
-            CC_quoted=
-            for arg in $CC; do
-              # Double-quote args containing other shell metacharacters.
-              func_quote_for_eval "$arg"
-              CC_quoted="$CC_quoted $func_quote_for_eval_result"
-            done
-            case "$@ " in
-              " $CC "* | "$CC "* | " `$ECHO $CC` "* | "`$ECHO $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$ECHO $CC_quoted` "* | "`$ECHO $CC_quoted` "*)
-              # The compiler in the base compile command matches
-              # the one in the tagged configuration.
-              # Assume this is the tagged configuration we want.
-              tagname=$z
-              break
-              ;;
-            esac
-          fi
-        done
-        # If $tagname still isn't set, then no tagged configuration
-        # was found and let the user know that the "--tag" command
-        # line option must be used.
-        if test -z "$tagname"; then
-          func_echo "unable to infer tagged configuration"
-          func_fatal_error "specify a tag with \`--tag'"
-#       else
-#         func_verbose "using $tagname tagged configuration"
-        fi
-        ;;
-      esac
-    fi
-}
-
-
-
-# func_write_libtool_object output_name pic_name nonpic_name
-# Create a libtool object file (analogous to a ".la" file),
-# but don't create it if we're doing a dry run.
-func_write_libtool_object ()
-{
-    write_libobj=${1}
-    if test "$build_libtool_libs" = yes; then
-      write_lobj=\'${2}\'
-    else
-      write_lobj=none
-    fi
-
-    if test "$build_old_libs" = yes; then
-      write_oldobj=\'${3}\'
-    else
-      write_oldobj=none
-    fi
-
-    $opt_dry_run || {
-      cat >${write_libobj}T <<EOF
-# $write_libobj - a libtool object file
-# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
-#
-# Please DO NOT delete this file!
-# It is necessary for linking the library.
-
-# Name of the PIC object.
-pic_object=$write_lobj
-
-# Name of the non-PIC object
-non_pic_object=$write_oldobj
-
-EOF
-      $MV "${write_libobj}T" "${write_libobj}"
-    }
-}
-
-# func_mode_compile arg...
-func_mode_compile ()
-{
-    $opt_debug
-    # Get the compilation command and the source file.
-    base_compile=
-    srcfile="$nonopt"  #  always keep a non-empty value in "srcfile"
-    suppress_opt=yes
-    suppress_output=
-    arg_mode=normal
-    libobj=
-    later=
-    pie_flag=
-
-    for arg
-    do
-      case $arg_mode in
-      arg  )
-        # do not "continue".  Instead, add this to base_compile
-        lastarg="$arg"
-        arg_mode=normal
-        ;;
-
-      target )
-        libobj="$arg"
-        arg_mode=normal
-        continue
-        ;;
-
-      normal )
-        # Accept any command-line options.
-        case $arg in
-        -o)
-          test -n "$libobj" && \
-            func_fatal_error "you cannot specify \`-o' more than once"
-          arg_mode=target
-          continue
-          ;;
-
-        -pie | -fpie | -fPIE)
-          pie_flag="$pie_flag $arg"
-          continue
-          ;;
-
-        -shared | -static | -prefer-pic | -prefer-non-pic)
-          later="$later $arg"
-          continue
-          ;;
-
-        -no-suppress)
-          suppress_opt=no
-          continue
-          ;;
-
-        -Xcompiler)
-          arg_mode=arg  #  the next one goes into the "base_compile" arg list
-          continue      #  The current "srcfile" will either be retained or
-          ;;            #  replaced later.  I would guess that would be a bug.
-
-        -Wc,*)
-          func_stripname '-Wc,' '' "$arg"
-          args=$func_stripname_result
-          lastarg=
-          save_ifs="$IFS"; IFS=','
-          for arg in $args; do
-            IFS="$save_ifs"
-            func_quote_for_eval "$arg"
-            lastarg="$lastarg $func_quote_for_eval_result"
-          done
-          IFS="$save_ifs"
-          func_stripname ' ' '' "$lastarg"
-          lastarg=$func_stripname_result
-
-          # Add the arguments to base_compile.
-          base_compile="$base_compile $lastarg"
-          continue
-          ;;
-
-        *)
-          # Accept the current argument as the source file.
-          # The previous "srcfile" becomes the current argument.
-          #
-          lastarg="$srcfile"
-          srcfile="$arg"
-          ;;
-        esac  #  case $arg
-        ;;
-      esac    #  case $arg_mode
-
-      # Aesthetically quote the previous argument.
-      func_quote_for_eval "$lastarg"
-      base_compile="$base_compile $func_quote_for_eval_result"
-    done # for arg
-
-    case $arg_mode in
-    arg)
-      func_fatal_error "you must specify an argument for -Xcompile"
-      ;;
-    target)
-      func_fatal_error "you must specify a target with \`-o'"
-      ;;
-    *)
-      # Get the name of the library object.
-      test -z "$libobj" && {
-        func_basename "$srcfile"
-        libobj="$func_basename_result"
-      }
-      ;;
-    esac
-
-    # Recognize several different file suffixes.
-    # If the user specifies -o file.o, it is replaced with file.lo
-    case $libobj in
-    *.[cCFSifmso] | \
-    *.ada | *.adb | *.ads | *.asm | \
-    *.c++ | *.cc | *.ii | *.class | *.cpp | *.cxx | \
-    *.[fF][09]? | *.for | *.java | *.obj | *.sx)
-      func_xform "$libobj"
-      libobj=$func_xform_result
-      ;;
-    esac
-
-    case $libobj in
-    *.lo) func_lo2o "$libobj"; obj=$func_lo2o_result ;;
-    *)
-      func_fatal_error "cannot determine name of library object from \`$libobj'"
-      ;;
-    esac
-
-    func_infer_tag $base_compile
-
-    for arg in $later; do
-      case $arg in
-      -shared)
-        test "$build_libtool_libs" != yes && \
-          func_fatal_configuration "can not build a shared library"
-        build_old_libs=no
-        continue
-        ;;
-
-      -static)
-        build_libtool_libs=no
-        build_old_libs=yes
-        continue
-        ;;
-
-      -prefer-pic)
-        pic_mode=yes
-        continue
-        ;;
-
-      -prefer-non-pic)
-        pic_mode=no
-        continue
-        ;;
-      esac
-    done
-
-    func_quote_for_eval "$libobj"
-    test "X$libobj" != "X$func_quote_for_eval_result" \
-      && $ECHO "X$libobj" | $GREP '[]~#^*{};<>?"'"'"'    &()|`$[]' \
-      && func_warning "libobj name \`$libobj' may not contain shell special characters."
-    func_dirname_and_basename "$obj" "/" ""
-    objname="$func_basename_result"
-    xdir="$func_dirname_result"
-    lobj=${xdir}$objdir/$objname
-
-    test -z "$base_compile" && \
-      func_fatal_help "you must specify a compilation command"
-
-    # Delete any leftover library objects.
-    if test "$build_old_libs" = yes; then
-      removelist="$obj $lobj $libobj ${libobj}T"
-    else
-      removelist="$lobj $libobj ${libobj}T"
-    fi
-
-    # On Cygwin there's no "real" PIC flag so we must build both object types
-    case $host_os in
-    cygwin* | mingw* | pw32* | os2* | cegcc*)
-      pic_mode=default
-      ;;
-    esac
-    if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then
-      # non-PIC code in shared libraries is not supported
-      pic_mode=default
-    fi
-
-    # Calculate the filename of the output object if compiler does
-    # not support -o with -c
-    if test "$compiler_c_o" = no; then
-      output_obj=`$ECHO "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext}
-      lockfile="$output_obj.lock"
-    else
-      output_obj=
-      need_locks=no
-      lockfile=
-    fi
-
-    # Lock this critical section if it is needed
-    # We use this script file to make the link, it avoids creating a new file
-    if test "$need_locks" = yes; then
-      until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do
-        func_echo "Waiting for $lockfile to be removed"
-        sleep 2
-      done
-    elif test "$need_locks" = warn; then
-      if test -f "$lockfile"; then
-        $ECHO "\
-*** ERROR, $lockfile exists and contains:
-`cat $lockfile 2>/dev/null`
-
-This indicates that another process is trying to use the same
-temporary object file, and libtool could not work around it because
-your compiler does not support \`-c' and \`-o' together.  If you
-repeat this compilation, it may succeed, by chance, but you had better
-avoid parallel builds (make -j) in this platform, or get a better
-compiler."
-
-        $opt_dry_run || $RM $removelist
-        exit $EXIT_FAILURE
-      fi
-      removelist="$removelist $output_obj"
-      $ECHO "$srcfile" > "$lockfile"
-    fi
-
-    $opt_dry_run || $RM $removelist
-    removelist="$removelist $lockfile"
-    trap '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' 1 2 15
-
-    if test -n "$fix_srcfile_path"; then
-      eval srcfile=\"$fix_srcfile_path\"
-    fi
-    func_quote_for_eval "$srcfile"
-    qsrcfile=$func_quote_for_eval_result
-
-    # Only build a PIC object if we are building libtool libraries.
-    if test "$build_libtool_libs" = yes; then
-      # Without this assignment, base_compile gets emptied.
-      fbsd_hideous_sh_bug=$base_compile
-
-      if test "$pic_mode" != no; then
-        command="$base_compile $qsrcfile $pic_flag"
-      else
-        # Don't build PIC code
-        command="$base_compile $qsrcfile"
-      fi
-
-      func_mkdir_p "$xdir$objdir"
-
-      if test -z "$output_obj"; then
-        # Place PIC objects in $objdir
-        command="$command -o $lobj"
-      fi
-
-      func_show_eval_locale "$command"  \
-          'test -n "$output_obj" && $RM $removelist; exit $EXIT_FAILURE'
-
-      if test "$need_locks" = warn &&
-         test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
-        $ECHO "\
-*** ERROR, $lockfile contains:
-`cat $lockfile 2>/dev/null`
-
-but it should contain:
-$srcfile
-
-This indicates that another process is trying to use the same
-temporary object file, and libtool could not work around it because
-your compiler does not support \`-c' and \`-o' together.  If you
-repeat this compilation, it may succeed, by chance, but you had better
-avoid parallel builds (make -j) in this platform, or get a better
-compiler."
-
-        $opt_dry_run || $RM $removelist
-        exit $EXIT_FAILURE
-      fi
-
-      # Just move the object if needed, then go on to compile the next one
-      if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then
-        func_show_eval '$MV "$output_obj" "$lobj"' \
-          'error=$?; $opt_dry_run || $RM $removelist; exit $error'
-      fi
-
-      # Allow error messages only from the first compilation.
-      if test "$suppress_opt" = yes; then
-        suppress_output=' >/dev/null 2>&1'
-      fi
-    fi
-
-    # Only build a position-dependent object if we build old libraries.
-    if test "$build_old_libs" = yes; then
-      if test "$pic_mode" != yes; then
-        # Don't build PIC code
-        command="$base_compile $qsrcfile$pie_flag"
-      else
-        command="$base_compile $qsrcfile $pic_flag"
-      fi
-      if test "$compiler_c_o" = yes; then
-        command="$command -o $obj"
-      fi
-
-      # Suppress compiler output if we already did a PIC compilation.
-      command="$command$suppress_output"
-      func_show_eval_locale "$command" \
-        '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE'
-
-      if test "$need_locks" = warn &&
-         test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
-        $ECHO "\
-*** ERROR, $lockfile contains:
-`cat $lockfile 2>/dev/null`
-
-but it should contain:
-$srcfile
-
-This indicates that another process is trying to use the same
-temporary object file, and libtool could not work around it because
-your compiler does not support \`-c' and \`-o' together.  If you
-repeat this compilation, it may succeed, by chance, but you had better
-avoid parallel builds (make -j) in this platform, or get a better
-compiler."
-
-        $opt_dry_run || $RM $removelist
-        exit $EXIT_FAILURE
-      fi
-
-      # Just move the object if needed
-      if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then
-        func_show_eval '$MV "$output_obj" "$obj"' \
-          'error=$?; $opt_dry_run || $RM $removelist; exit $error'
-      fi
-    fi
-
-    $opt_dry_run || {
-      func_write_libtool_object "$libobj" "$objdir/$objname" "$objname"
-
-      # Unlock the critical section if it was locked
-      if test "$need_locks" != no; then
-        removelist=$lockfile
-        $RM "$lockfile"
-      fi
-    }
-
-    exit $EXIT_SUCCESS
-}
-
-$opt_help || {
-test "$mode" = compile && func_mode_compile ${1+"$@"}
-}
-
-func_mode_help ()
-{
-    # We need to display help for each of the modes.
-    case $mode in
-      "")
-        # Generic help is extracted from the usage comments
-        # at the start of this file.
-        func_help
-        ;;
-
-      clean)
-        $ECHO \
-"Usage: $progname [OPTION]... --mode=clean RM [RM-OPTION]... FILE...
-
-Remove files from the build directory.
-
-RM is the name of the program to use to delete files associated with each FILE
-(typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed
-to RM.
-
-If FILE is a libtool library, object or program, all the files associated
-with it are deleted. Otherwise, only FILE itself is deleted using RM."
-        ;;
-
-      compile)
-      $ECHO \
-"Usage: $progname [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE
-
-Compile a source file into a libtool library object.
-
-This mode accepts the following additional options:
-
-  -o OUTPUT-FILE    set the output file name to OUTPUT-FILE
-  -no-suppress      do not suppress compiler output for multiple passes
-  -prefer-pic       try to building PIC objects only
-  -prefer-non-pic   try to building non-PIC objects only
-  -shared           do not build a \`.o' file suitable for static linking
-  -static           only build a \`.o' file suitable for static linking
-
-COMPILE-COMMAND is a command to be used in creating a \`standard' object file
-from the given SOURCEFILE.
-
-The output file name is determined by removing the directory component from
-SOURCEFILE, then substituting the C source code suffix \`.c' with the
-library object suffix, \`.lo'."
-        ;;
-
-      execute)
-        $ECHO \
-"Usage: $progname [OPTION]... --mode=execute COMMAND [ARGS]...
-
-Automatically set library path, then run a program.
-
-This mode accepts the following additional options:
-
-  -dlopen FILE      add the directory containing FILE to the library path
-
-This mode sets the library path environment variable according to \`-dlopen'
-flags.
-
-If any of the ARGS are libtool executable wrappers, then they are translated
-into their corresponding uninstalled binary, and any of their required library
-directories are added to the library path.
-
-Then, COMMAND is executed, with ARGS as arguments."
-        ;;
-
-      finish)
-        $ECHO \
-"Usage: $progname [OPTION]... --mode=finish [LIBDIR]...
-
-Complete the installation of libtool libraries.
-
-Each LIBDIR is a directory that contains libtool libraries.
-
-The commands that this mode executes may require superuser privileges.  Use
-the \`--dry-run' option if you just want to see what would be executed."
-        ;;
-
-      install)
-        $ECHO \
-"Usage: $progname [OPTION]... --mode=install INSTALL-COMMAND...
-
-Install executables or libraries.
-
-INSTALL-COMMAND is the installation command.  The first component should be
-either the \`install' or \`cp' program.
-
-The following components of INSTALL-COMMAND are treated specially:
-
-  -inst-prefix PREFIX-DIR  Use PREFIX-DIR as a staging area for installation
-
-The rest of the components are interpreted as arguments to that command (only
-BSD-compatible install options are recognized)."
-        ;;
-
-      link)
-        $ECHO \
-"Usage: $progname [OPTION]... --mode=link LINK-COMMAND...
-
-Link object files or libraries together to form another library, or to
-create an executable program.
-
-LINK-COMMAND is a command using the C compiler that you would use to create
-a program from several object files.
-
-The following components of LINK-COMMAND are treated specially:
-
-  -all-static       do not do any dynamic linking at all
-  -avoid-version    do not add a version suffix if possible
-  -dlopen FILE      \`-dlpreopen' FILE if it cannot be dlopened at runtime
-  -dlpreopen FILE   link in FILE and add its symbols to lt_preloaded_symbols
-  -export-dynamic   allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
-  -export-symbols SYMFILE
-                    try to export only the symbols listed in SYMFILE
-  -export-symbols-regex REGEX
-                    try to export only the symbols matching REGEX
-  -LLIBDIR          search LIBDIR for required installed libraries
-  -lNAME            OUTPUT-FILE requires the installed library libNAME
-  -module           build a library that can dlopened
-  -no-fast-install  disable the fast-install mode
-  -no-install       link a not-installable executable
-  -no-undefined     declare that a library does not refer to external symbols
-  -o OUTPUT-FILE    create OUTPUT-FILE from the specified objects
-  -objectlist FILE  Use a list of object files found in FILE to specify objects
-  -precious-files-regex REGEX
-                    don't remove output files matching REGEX
-  -release RELEASE  specify package release information
-  -rpath LIBDIR     the created library will eventually be installed in LIBDIR
-  -R[ ]LIBDIR       add LIBDIR to the runtime path of programs and libraries
-  -shared           only do dynamic linking of libtool libraries
-  -shrext SUFFIX    override the standard shared library file extension
-  -static           do not do any dynamic linking of uninstalled libtool libraries
-  -static-libtool-libs
-                    do not do any dynamic linking of libtool libraries
-  -version-info CURRENT[:REVISION[:AGE]]
-                    specify library version info [each variable defaults to 0]
-  -weak LIBNAME     declare that the target provides the LIBNAME interface
-
-All other options (arguments beginning with \`-') are ignored.
-
-Every other argument is treated as a filename.  Files ending in \`.la' are
-treated as uninstalled libtool libraries, other files are standard or library
-object files.
-
-If the OUTPUT-FILE ends in \`.la', then a libtool library is created,
-only library objects (\`.lo' files) may be specified, and \`-rpath' is
-required, except when creating a convenience library.
-
-If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created
-using \`ar' and \`ranlib', or on Windows using \`lib'.
-
-If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file
-is created, otherwise an executable program is created."
-        ;;
-
-      uninstall)
-        $ECHO \
-"Usage: $progname [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE...
-
-Remove libraries from an installation directory.
-
-RM is the name of the program to use to delete files associated with each FILE
-(typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed
-to RM.
-
-If FILE is a libtool library, all the files associated with it are deleted.
-Otherwise, only FILE itself is deleted using RM."
-        ;;
-
-      *)
-        func_fatal_help "invalid operation mode \`$mode'"
-        ;;
-    esac
-
-    $ECHO
-    $ECHO "Try \`$progname --help' for more information about other modes."
-
-    exit $?
-}
-
-  # Now that we've collected a possible --mode arg, show help if necessary
-  $opt_help && func_mode_help
-
-
-# func_mode_execute arg...
-func_mode_execute ()
-{
-    $opt_debug
-    # The first argument is the command name.
-    cmd="$nonopt"
-    test -z "$cmd" && \
-      func_fatal_help "you must specify a COMMAND"
-
-    # Handle -dlopen flags immediately.
-    for file in $execute_dlfiles; do
-      test -f "$file" \
-        || func_fatal_help "\`$file' is not a file"
-
-      dir=
-      case $file in
-      *.la)
-        # Check to see that this really is a libtool archive.
-        func_lalib_unsafe_p "$file" \
-          || func_fatal_help "\`$lib' is not a valid libtool archive"
-
-        # Read the libtool library.
-        dlname=
-        library_names=
-        func_source "$file"
-
-        # Skip this library if it cannot be dlopened.
-        if test -z "$dlname"; then
-          # Warn if it was a shared library.
-          test -n "$library_names" && \
-            func_warning "\`$file' was not linked with \`-export-dynamic'"
-          continue
-        fi
-
-        func_dirname "$file" "" "."
-        dir="$func_dirname_result"
-
-        if test -f "$dir/$objdir/$dlname"; then
-          dir="$dir/$objdir"
-        else
-          if test ! -f "$dir/$dlname"; then
-            func_fatal_error "cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'"
-          fi
-        fi
-        ;;
-
-      *.lo)
-        # Just add the directory containing the .lo file.
-        func_dirname "$file" "" "."
-        dir="$func_dirname_result"
-        ;;
-
-      *)
-        func_warning "\`-dlopen' is ignored for non-libtool libraries and objects"
-        continue
-        ;;
-      esac
-
-      # Get the absolute pathname.
-      absdir=`cd "$dir" && pwd`
-      test -n "$absdir" && dir="$absdir"
-
-      # Now add the directory to shlibpath_var.
-      if eval "test -z \"\$$shlibpath_var\""; then
-        eval "$shlibpath_var=\"\$dir\""
-      else
-        eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\""
-      fi
-    done
-
-    # This variable tells wrapper scripts just to set shlibpath_var
-    # rather than running their programs.
-    libtool_execute_magic="$magic"
-
-    # Check if any of the arguments is a wrapper script.
-    args=
-    for file
-    do
-      case $file in
-      -*) ;;
-      *)
-        # Do a test to see if this is really a libtool program.
-        if func_ltwrapper_script_p "$file"; then
-          func_source "$file"
-          # Transform arg to wrapped name.
-          file="$progdir/$program"
-        elif func_ltwrapper_executable_p "$file"; then
-          func_ltwrapper_scriptname "$file"
-          func_source "$func_ltwrapper_scriptname_result"
-          # Transform arg to wrapped name.
-          file="$progdir/$program"
-        fi
-        ;;
-      esac
-      # Quote arguments (to preserve shell metacharacters).
-      func_quote_for_eval "$file"
-      args="$args $func_quote_for_eval_result"
-    done
-
-    if test "X$opt_dry_run" = Xfalse; then
-      if test -n "$shlibpath_var"; then
-        # Export the shlibpath_var.
-        eval "export $shlibpath_var"
-      fi
-
-      # Restore saved environment variables
-      for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
-      do
-        eval "if test \"\${save_$lt_var+set}\" = set; then
-                $lt_var=\$save_$lt_var; export $lt_var
-              else
-                $lt_unset $lt_var
-              fi"
-      done
-
-      # Now prepare to actually exec the command.
-      exec_cmd="\$cmd$args"
-    else
-      # Display what would be done.
-      if test -n "$shlibpath_var"; then
-        eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\""
-        $ECHO "export $shlibpath_var"
-      fi
-      $ECHO "$cmd$args"
-      exit $EXIT_SUCCESS
-    fi
-}
-
-test "$mode" = execute && func_mode_execute ${1+"$@"}
-
-
-# func_mode_finish arg...
-func_mode_finish ()
-{
-    $opt_debug
-    libdirs="$nonopt"
-    admincmds=
-
-    if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
-      for dir
-      do
-        libdirs="$libdirs $dir"
-      done
-
-      for libdir in $libdirs; do
-        if test -n "$finish_cmds"; then
-          # Do each command in the finish commands.
-          func_execute_cmds "$finish_cmds" 'admincmds="$admincmds
-'"$cmd"'"'
-        fi
-        if test -n "$finish_eval"; then
-          # Do the single finish_eval.
-          eval cmds=\"$finish_eval\"
-          $opt_dry_run || eval "$cmds" || admincmds="$admincmds
-       $cmds"
-        fi
-      done
-    fi
-
-    # Exit here if they wanted silent mode.
-    $opt_silent && exit $EXIT_SUCCESS
-
-    $ECHO "X----------------------------------------------------------------------" | $Xsed
-    $ECHO "Libraries have been installed in:"
-    for libdir in $libdirs; do
-      $ECHO "   $libdir"
-    done
-    $ECHO
-    $ECHO "If you ever happen to want to link against installed libraries"
-    $ECHO "in a given directory, LIBDIR, you must either use libtool, and"
-    $ECHO "specify the full pathname of the library, or use the \`-LLIBDIR'"
-    $ECHO "flag during linking and do at least one of the following:"
-    if test -n "$shlibpath_var"; then
-      $ECHO "   - add LIBDIR to the \`$shlibpath_var' environment variable"
-      $ECHO "     during execution"
-    fi
-    if test -n "$runpath_var"; then
-      $ECHO "   - add LIBDIR to the \`$runpath_var' environment variable"
-      $ECHO "     during linking"
-    fi
-    if test -n "$hardcode_libdir_flag_spec"; then
-      libdir=LIBDIR
-      eval flag=\"$hardcode_libdir_flag_spec\"
-
-      $ECHO "   - use the \`$flag' linker flag"
-    fi
-    if test -n "$admincmds"; then
-      $ECHO "   - have your system administrator run these commands:$admincmds"
-    fi
-    if test -f /etc/ld.so.conf; then
-      $ECHO "   - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
-    fi
-    $ECHO
-
-    $ECHO "See any operating system documentation about shared libraries for"
-    case $host in
-      solaris2.[6789]|solaris2.1[0-9])
-        $ECHO "more information, such as the ld(1), crle(1) and ld.so(8) manual"
-        $ECHO "pages."
-        ;;
-      *)
-        $ECHO "more information, such as the ld(1) and ld.so(8) manual pages."
-        ;;
-    esac
-    $ECHO "X----------------------------------------------------------------------" | $Xsed
-    exit $EXIT_SUCCESS
-}
-
-test "$mode" = finish && func_mode_finish ${1+"$@"}
-
-
-# func_mode_install arg...
-func_mode_install ()
-{
-    $opt_debug
-    # There may be an optional sh(1) argument at the beginning of
-    # install_prog (especially on Windows NT).
-    if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||
-       # Allow the use of GNU shtool's install command.
-       $ECHO "X$nonopt" | $GREP shtool >/dev/null; then
-      # Aesthetically quote it.
-      func_quote_for_eval "$nonopt"
-      install_prog="$func_quote_for_eval_result "
-      arg=$1
-      shift
-    else
-      install_prog=
-      arg=$nonopt
-    fi
-
-    # The real first argument should be the name of the installation program.
-    # Aesthetically quote it.
-    func_quote_for_eval "$arg"
-    install_prog="$install_prog$func_quote_for_eval_result"
-
-    # We need to accept at least all the BSD install flags.
-    dest=
-    files=
-    opts=
-    prev=
-    install_type=
-    isdir=no
-    stripme=
-    for arg
-    do
-      if test -n "$dest"; then
-        files="$files $dest"
-        dest=$arg
-        continue
-      fi
-
-      case $arg in
-      -d) isdir=yes ;;
-      -f)
-        case " $install_prog " in
-        *[\\\ /]cp\ *) ;;
-        *) prev=$arg ;;
-        esac
-        ;;
-      -g | -m | -o)
-        prev=$arg
-        ;;
-      -s)
-        stripme=" -s"
-        continue
-        ;;
-      -*)
-        ;;
-      *)
-        # If the previous option needed an argument, then skip it.
-        if test -n "$prev"; then
-          prev=
-        else
-          dest=$arg
-          continue
-        fi
-        ;;
-      esac
-
-      # Aesthetically quote the argument.
-      func_quote_for_eval "$arg"
-      install_prog="$install_prog $func_quote_for_eval_result"
-    done
-
-    test -z "$install_prog" && \
-      func_fatal_help "you must specify an install program"
-
-    test -n "$prev" && \
-      func_fatal_help "the \`$prev' option requires an argument"
-
-    if test -z "$files"; then
-      if test -z "$dest"; then
-        func_fatal_help "no file or destination specified"
-      else
-        func_fatal_help "you must specify a destination"
-      fi
-    fi
-
-    # Strip any trailing slash from the destination.
-    func_stripname '' '/' "$dest"
-    dest=$func_stripname_result
-
-    # Check to see that the destination is a directory.
-    test -d "$dest" && isdir=yes
-    if test "$isdir" = yes; then
-      destdir="$dest"
-      destname=
-    else
-      func_dirname_and_basename "$dest" "" "."
-      destdir="$func_dirname_result"
-      destname="$func_basename_result"
-
-      # Not a directory, so check to see that there is only one file specified.
-      set dummy $files; shift
-      test "$#" -gt 1 && \
-        func_fatal_help "\`$dest' is not a directory"
-    fi
-    case $destdir in
-    [\\/]* | [A-Za-z]:[\\/]*) ;;
-    *)
-      for file in $files; do
-        case $file in
-        *.lo) ;;
-        *)
-          func_fatal_help "\`$destdir' must be an absolute directory name"
-          ;;
-        esac
-      done
-      ;;
-    esac
-
-    # This variable tells wrapper scripts just to set variables rather
-    # than running their programs.
-    libtool_install_magic="$magic"
-
-    staticlibs=
-    future_libdirs=
-    current_libdirs=
-    for file in $files; do
-
-      # Do each installation.
-      case $file in
-      *.$libext)
-        # Do the static libraries later.
-        staticlibs="$staticlibs $file"
-        ;;
-
-      *.la)
-        # Check to see that this really is a libtool archive.
-        func_lalib_unsafe_p "$file" \
-          || func_fatal_help "\`$file' is not a valid libtool archive"
-
-        library_names=
-        old_library=
-        relink_command=
-        func_source "$file"
-
-        # Add the libdir to current_libdirs if it is the destination.
-        if test "X$destdir" = "X$libdir"; then
-          case "$current_libdirs " in
-          *" $libdir "*) ;;
-          *) current_libdirs="$current_libdirs $libdir" ;;
-          esac
-        else
-          # Note the libdir as a future libdir.
-          case "$future_libdirs " in
-          *" $libdir "*) ;;
-          *) future_libdirs="$future_libdirs $libdir" ;;
-          esac
-        fi
-
-        func_dirname "$file" "/" ""
-        dir="$func_dirname_result"
-        dir="$dir$objdir"
-
-        if test -n "$relink_command"; then
-          # Determine the prefix the user has applied to our future dir.
-          inst_prefix_dir=`$ECHO "X$destdir" | $Xsed -e "s%$libdir\$%%"`
-
-          # Don't allow the user to place us outside of our expected
-          # location b/c this prevents finding dependent libraries that
-          # are installed to the same prefix.
-          # At present, this check doesn't affect windows .dll's that
-          # are installed into $libdir/../bin (currently, that works fine)
-          # but it's something to keep an eye on.
-          test "$inst_prefix_dir" = "$destdir" && \
-            func_fatal_error "error: cannot install \`$file' to a directory not ending in $libdir"
-
-          if test -n "$inst_prefix_dir"; then
-            # Stick the inst_prefix_dir data into the link command.
-            relink_command=`$ECHO "X$relink_command" | $Xsed -e "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`
-          else
-            relink_command=`$ECHO "X$relink_command" | $Xsed -e "s%@inst_prefix_dir@%%"`
-          fi
-
-          func_warning "relinking \`$file'"
-          func_show_eval "$relink_command" \
-            'func_fatal_error "error: relink \`$file'\'' with the above command before installing it"'
-        fi
-
-        # See the names of the shared library.
-        set dummy $library_names; shift
-        if test -n "$1"; then
-          realname="$1"
-          shift
-
-          srcname="$realname"
-          test -n "$relink_command" && srcname="$realname"T
-
-          # Install the shared library and build the symlinks.
-          func_show_eval "$install_prog $dir/$srcname $destdir/$realname" \
-              'exit $?'
-          tstripme="$stripme"
-          case $host_os in
-          cygwin* | mingw* | pw32* | cegcc*)
-            case $realname in
-            *.dll.a)
-              tstripme=""
-              ;;
-            esac
-            ;;
-          esac
-          if test -n "$tstripme" && test -n "$striplib"; then
-            func_show_eval "$striplib $destdir/$realname" 'exit $?'
-          fi
-
-          if test "$#" -gt 0; then
-            # Delete the old symlinks, and create new ones.
-            # Try `ln -sf' first, because the `ln' binary might depend on
-            # the symlink we replace!  Solaris /bin/ln does not understand -f,
-            # so we also need to try rm && ln -s.
-            for linkname
-            do
-              test "$linkname" != "$realname" \
-                && func_show_eval "(cd $destdir && { $LN_S -f $realname $linkname || { $RM $linkname && $LN_S $realname $linkname; }; })"
-            done
-          fi
-
-          # Do each command in the postinstall commands.
-          lib="$destdir/$realname"
-          func_execute_cmds "$postinstall_cmds" 'exit $?'
-        fi
-
-        # Install the pseudo-library for information purposes.
-        func_basename "$file"
-        name="$func_basename_result"
-        instname="$dir/$name"i
-        func_show_eval "$install_prog $instname $destdir/$name" 'exit $?'
-
-        # Maybe install the static library, too.
-        test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library"
-        ;;
-
-      *.lo)
-        # Install (i.e. copy) a libtool object.
-
-        # Figure out destination file name, if it wasn't already specified.
-        if test -n "$destname"; then
-          destfile="$destdir/$destname"
-        else
-          func_basename "$file"
-          destfile="$func_basename_result"
-          destfile="$destdir/$destfile"
-        fi
-
-        # Deduce the name of the destination old-style object file.
-        case $destfile in
-        *.lo)
-          func_lo2o "$destfile"
-          staticdest=$func_lo2o_result
-          ;;
-        *.$objext)
-          staticdest="$destfile"
-          destfile=
-          ;;
-        *)
-          func_fatal_help "cannot copy a libtool object to \`$destfile'"
-          ;;
-        esac
-
-        # Install the libtool object if requested.
-        test -n "$destfile" && \
-          func_show_eval "$install_prog $file $destfile" 'exit $?'
-
-        # Install the old object if enabled.
-        if test "$build_old_libs" = yes; then
-          # Deduce the name of the old-style object file.
-          func_lo2o "$file"
-          staticobj=$func_lo2o_result
-          func_show_eval "$install_prog \$staticobj \$staticdest" 'exit $?'
-        fi
-        exit $EXIT_SUCCESS
-        ;;
-
-      *)
-        # Figure out destination file name, if it wasn't already specified.
-        if test -n "$destname"; then
-          destfile="$destdir/$destname"
-        else
-          func_basename "$file"
-          destfile="$func_basename_result"
-          destfile="$destdir/$destfile"
-        fi
-
-        # If the file is missing, and there is a .exe on the end, strip it
-        # because it is most likely a libtool script we actually want to
-        # install
-        stripped_ext=""
-        case $file in
-          *.exe)
-            if test ! -f "$file"; then
-              func_stripname '' '.exe' "$file"
-              file=$func_stripname_result
-              stripped_ext=".exe"
-            fi
-            ;;
-        esac
-
-        # Do a test to see if this is really a libtool program.
-        case $host in
-        *cygwin* | *mingw*)
-            if func_ltwrapper_executable_p "$file"; then
-              func_ltwrapper_scriptname "$file"
-              wrapper=$func_ltwrapper_scriptname_result
-            else
-              func_stripname '' '.exe' "$file"
-              wrapper=$func_stripname_result
-            fi
-            ;;
-        *)
-            wrapper=$file
-            ;;
-        esac
-        if func_ltwrapper_script_p "$wrapper"; then
-          notinst_deplibs=
-          relink_command=
-
-          func_source "$wrapper"
-
-          # Check the variables that should have been set.
-          test -z "$generated_by_libtool_version" && \
-            func_fatal_error "invalid libtool wrapper script \`$wrapper'"
-
-          finalize=yes
-          for lib in $notinst_deplibs; do
-            # Check to see that each library is installed.
-            libdir=
-            if test -f "$lib"; then
-              func_source "$lib"
-            fi
-            libfile="$libdir/"`$ECHO "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test
-            if test -n "$libdir" && test ! -f "$libfile"; then
-              func_warning "\`$lib' has not been installed in \`$libdir'"
-              finalize=no
-            fi
-          done
-
-          relink_command=
-          func_source "$wrapper"
-
-          outputname=
-          if test "$fast_install" = no && test -n "$relink_command"; then
-            $opt_dry_run || {
-              if test "$finalize" = yes; then
-                tmpdir=`func_mktempdir`
-                func_basename "$file$stripped_ext"
-                file="$func_basename_result"
-                outputname="$tmpdir/$file"
-                # Replace the output file specification.
-                relink_command=`$ECHO "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'`
-
-                $opt_silent || {
-                  func_quote_for_expand "$relink_command"
-                  eval "func_echo $func_quote_for_expand_result"
-                }
-                if eval "$relink_command"; then :
-                  else
-                  func_error "error: relink \`$file' with the above command before installing it"
-                  $opt_dry_run || ${RM}r "$tmpdir"
-                  continue
-                fi
-                file="$outputname"
-              else
-                func_warning "cannot relink \`$file'"
-              fi
-            }
-          else
-            # Install the binary that we compiled earlier.
-            file=`$ECHO "X$file$stripped_ext" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"`
-          fi
-        fi
-
-        # remove .exe since cygwin /usr/bin/install will append another
-        # one anyway
-        case $install_prog,$host in
-        */usr/bin/install*,*cygwin*)
-          case $file:$destfile in
-          *.exe:*.exe)
-            # this is ok
-            ;;
-          *.exe:*)
-            destfile=$destfile.exe
-            ;;
-          *:*.exe)
-            func_stripname '' '.exe' "$destfile"
-            destfile=$func_stripname_result
-            ;;
-          esac
-          ;;
-        esac
-        func_show_eval "$install_prog\$stripme \$file \$destfile" 'exit $?'
-        $opt_dry_run || if test -n "$outputname"; then
-          ${RM}r "$tmpdir"
-        fi
-        ;;
-      esac
-    done
-
-    for file in $staticlibs; do
-      func_basename "$file"
-      name="$func_basename_result"
-
-      # Set up the ranlib parameters.
-      oldlib="$destdir/$name"
-
-      func_show_eval "$install_prog \$file \$oldlib" 'exit $?'
-
-      if test -n "$stripme" && test -n "$old_striplib"; then
-        func_show_eval "$old_striplib $oldlib" 'exit $?'
-      fi
-
-      # Do each command in the postinstall commands.
-      func_execute_cmds "$old_postinstall_cmds" 'exit $?'
-    done
-
-    test -n "$future_libdirs" && \
-      func_warning "remember to run \`$progname --finish$future_libdirs'"
-
-    if test -n "$current_libdirs"; then
-      # Maybe just do a dry run.
-      $opt_dry_run && current_libdirs=" -n$current_libdirs"
-      exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs'
-    else
-      exit $EXIT_SUCCESS
-    fi
-}
-
-test "$mode" = install && func_mode_install ${1+"$@"}
-
-
-# func_generate_dlsyms outputname originator pic_p
-# Extract symbols from dlprefiles and create ${outputname}S.o with
-# a dlpreopen symbol table.
-func_generate_dlsyms ()
-{
-    $opt_debug
-    my_outputname="$1"
-    my_originator="$2"
-    my_pic_p="${3-no}"
-    my_prefix=`$ECHO "$my_originator" | sed 's%[^a-zA-Z0-9]%_%g'`
-    my_dlsyms=
-
-    if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
-      if test -n "$NM" && test -n "$global_symbol_pipe"; then
-        my_dlsyms="${my_outputname}S.c"
-      else
-        func_error "not configured to extract global symbols from dlpreopened files"
-      fi
-    fi
-
-    if test -n "$my_dlsyms"; then
-      case $my_dlsyms in
-      "") ;;
-      *.c)
-        # Discover the nlist of each of the dlfiles.
-        nlist="$output_objdir/${my_outputname}.nm"
-
-        func_show_eval "$RM $nlist ${nlist}S ${nlist}T"
-
-        # Parse the name list into a source file.
-        func_verbose "creating $output_objdir/$my_dlsyms"
-
-        $opt_dry_run || $ECHO > "$output_objdir/$my_dlsyms" "\
-/* $my_dlsyms - symbol resolution table for \`$my_outputname' dlsym emulation. */
-/* Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION */
-
-#ifdef __cplusplus
-extern \"C\" {
-#endif
-
-/* External symbol declarations for the compiler. */\
-"
-
-        if test "$dlself" = yes; then
-          func_verbose "generating symbol list for \`$output'"
-
-          $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist"
-
-          # Add our own program objects to the symbol list.
-          progfiles=`$ECHO "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
-          for progfile in $progfiles; do
-            func_verbose "extracting global C symbols from \`$progfile'"
-            $opt_dry_run || eval "$NM $progfile | $global_symbol_pipe >> '$nlist'"
-          done
-
-          if test -n "$exclude_expsyms"; then
-            $opt_dry_run || {
-              eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'
-              eval '$MV "$nlist"T "$nlist"'
-            }
-          fi
-
-          if test -n "$export_symbols_regex"; then
-            $opt_dry_run || {
-              eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T'
-              eval '$MV "$nlist"T "$nlist"'
-            }
-          fi
-
-          # Prepare the list of exported symbols
-          if test -z "$export_symbols"; then
-            export_symbols="$output_objdir/$outputname.exp"
-            $opt_dry_run || {
-              $RM $export_symbols
-              eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
-              case $host in
-              *cygwin* | *mingw* | *cegcc* )
-                eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
-                eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"'
-                ;;
-              esac
-            }
-          else
-            $opt_dry_run || {
-              eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
-              eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'
-              eval '$MV "$nlist"T "$nlist"'
-              case $host in
-                *cygwin | *mingw* | *cegcc* )
-                  eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
-                  eval 'cat "$nlist" >> "$output_objdir/$outputname.def"'
-                  ;;
-              esac
-            }
-          fi
-        fi
-
-        for dlprefile in $dlprefiles; do
-          func_verbose "extracting global C symbols from \`$dlprefile'"
-          func_basename "$dlprefile"
-          name="$func_basename_result"
-          $opt_dry_run || {
-            eval '$ECHO ": $name " >> "$nlist"'
-            eval "$NM $dlprefile 2>/dev/null | $global_symbol_pipe >> '$nlist'"
-          }
-        done
-
-        $opt_dry_run || {
-          # Make sure we have at least an empty file.
-          test -f "$nlist" || : > "$nlist"
-
-          if test -n "$exclude_expsyms"; then
-            $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T
-            $MV "$nlist"T "$nlist"
-          fi
-
-          # Try sorting and uniquifying the output.
-          if $GREP -v "^: " < "$nlist" |
-              if sort -k 3 </dev/null >/dev/null 2>&1; then
-                sort -k 3
-              else
-                sort +2
-              fi |
-              uniq > "$nlist"S; then
-            :
-          else
-            $GREP -v "^: " < "$nlist" > "$nlist"S
-          fi
-
-          if test -f "$nlist"S; then
-            eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"'
-          else
-            $ECHO '/* NONE */' >> "$output_objdir/$my_dlsyms"
-          fi
-
-          $ECHO >> "$output_objdir/$my_dlsyms" "\
-
-/* The mapping between symbol names and symbols.  */
-typedef struct {
-  const char *name;
-  void *address;
-} lt_dlsymlist;
-"
-          case $host in
-          *cygwin* | *mingw* | *cegcc* )
-            $ECHO >> "$output_objdir/$my_dlsyms" "\
-/* DATA imports from DLLs on WIN32 con't be const, because
-   runtime relocations are performed -- see ld's documentation
-   on pseudo-relocs.  */"
-            lt_dlsym_const= ;;
-          *osf5*)
-            echo >> "$output_objdir/$my_dlsyms" "\
-/* This system does not cope well with relocations in const data */"
-            lt_dlsym_const= ;;
-          *)
-            lt_dlsym_const=const ;;
-          esac
-
-          $ECHO >> "$output_objdir/$my_dlsyms" "\
-extern $lt_dlsym_const lt_dlsymlist
-lt_${my_prefix}_LTX_preloaded_symbols[];
-$lt_dlsym_const lt_dlsymlist
-lt_${my_prefix}_LTX_preloaded_symbols[] =
-{\
-  { \"$my_originator\", (void *) 0 },"
-
-          case $need_lib_prefix in
-          no)
-            eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$my_dlsyms"
-            ;;
-          *)
-            eval "$global_symbol_to_c_name_address_lib_prefix" < "$nlist" >> "$output_objdir/$my_dlsyms"
-            ;;
-          esac
-          $ECHO >> "$output_objdir/$my_dlsyms" "\
-  {0, (void *) 0}
-};
-
-/* This works around a problem in FreeBSD linker */
-#ifdef FREEBSD_WORKAROUND
-static const void *lt_preloaded_setup() {
-  return lt_${my_prefix}_LTX_preloaded_symbols;
-}
-#endif
-
-#ifdef __cplusplus
-}
-#endif\
-"
-        } # !$opt_dry_run
-
-        pic_flag_for_symtable=
-        case "$compile_command " in
-        *" -static "*) ;;
-        *)
-          case $host in
-          # compiling the symbol table file with pic_flag works around
-          # a FreeBSD bug that causes programs to crash when -lm is
-          # linked before any other PIC object.  But we must not use
-          # pic_flag when linking with -static.  The problem exists in
-          # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1.
-          *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)
-            pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND" ;;
-          *-*-hpux*)
-            pic_flag_for_symtable=" $pic_flag"  ;;
-          *)
-            if test "X$my_pic_p" != Xno; then
-              pic_flag_for_symtable=" $pic_flag"
-            fi
-            ;;
-          esac
-          ;;
-        esac
-        symtab_cflags=
-        for arg in $LTCFLAGS; do
-          case $arg in
-          -pie | -fpie | -fPIE) ;;
-          *) symtab_cflags="$symtab_cflags $arg" ;;
-          esac
-        done
-
-        # Now compile the dynamic symbol file.
-        func_show_eval '(cd $output_objdir && $LTCC$symtab_cflags -c$no_builtin_flag$pic_flag_for_symtable "$my_dlsyms")' 'exit $?'
-
-        # Clean up the generated files.
-        func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T"'
-
-        # Transform the symbol file into the correct name.
-        symfileobj="$output_objdir/${my_outputname}S.$objext"
-        case $host in
-        *cygwin* | *mingw* | *cegcc* )
-          if test -f "$output_objdir/$my_outputname.def"; then
-            compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
-            finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
-          else
-            compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
-            finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
-          fi
-          ;;
-        *)
-          compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
-          finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
-          ;;
-        esac
-        ;;
-      *)
-        func_fatal_error "unknown suffix for \`$my_dlsyms'"
-        ;;
-      esac
-    else
-      # We keep going just in case the user didn't refer to
-      # lt_preloaded_symbols.  The linker will fail if global_symbol_pipe
-      # really was required.
-
-      # Nullify the symbol file.
-      compile_command=`$ECHO "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"`
-      finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"`
-    fi
-}
-
-# func_win32_libid arg
-# return the library type of file 'arg'
-#
-# Need a lot of goo to handle *both* DLLs and import libs
-# Has to be a shell function in order to 'eat' the argument
-# that is supplied when $file_magic_command is called.
-func_win32_libid ()
-{
-  $opt_debug
-  win32_libid_type="unknown"
-  win32_fileres=`file -L $1 2>/dev/null`
-  case $win32_fileres in
-  *ar\ archive\ import\ library*) # definitely import
-    win32_libid_type="x86 archive import"
-    ;;
-  *ar\ archive*) # could be an import, or static
-    if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null |
-       $EGREP 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then
-      win32_nmres=`eval $NM -f posix -A $1 |
-        $SED -n -e '
-            1,100{
-                / I /{
-                    s,.*,import,
-                    p
-                    q
-                }
-            }'`
-      case $win32_nmres in
-      import*)  win32_libid_type="x86 archive import";;
-      *)        win32_libid_type="x86 archive static";;
-      esac
-    fi
-    ;;
-  *DLL*)
-    win32_libid_type="x86 DLL"
-    ;;
-  *executable*) # but shell scripts are "executable" too...
-    case $win32_fileres in
-    *MS\ Windows\ PE\ Intel*)
-      win32_libid_type="x86 DLL"
-      ;;
-    esac
-    ;;
-  esac
-  $ECHO "$win32_libid_type"
-}
-
-
-
-# func_extract_an_archive dir oldlib
-func_extract_an_archive ()
-{
-    $opt_debug
-    f_ex_an_ar_dir="$1"; shift
-    f_ex_an_ar_oldlib="$1"
-    func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" 'exit $?'
-    if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then
-     :
-    else
-      func_fatal_error "object name conflicts in archive: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib"
-    fi
-}
-
-
-# func_extract_archives gentop oldlib ...
-func_extract_archives ()
-{
-    $opt_debug
-    my_gentop="$1"; shift
-    my_oldlibs=${1+"$@"}
-    my_oldobjs=""
-    my_xlib=""
-    my_xabs=""
-    my_xdir=""
-
-    for my_xlib in $my_oldlibs; do
-      # Extract the objects.
-      case $my_xlib in
-        [\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;;
-        *) my_xabs=`pwd`"/$my_xlib" ;;
-      esac
-      func_basename "$my_xlib"
-      my_xlib="$func_basename_result"
-      my_xlib_u=$my_xlib
-      while :; do
-        case " $extracted_archives " in
-        *" $my_xlib_u "*)
-          func_arith $extracted_serial + 1
-          extracted_serial=$func_arith_result
-          my_xlib_u=lt$extracted_serial-$my_xlib ;;
-        *) break ;;
-        esac
-      done
-      extracted_archives="$extracted_archives $my_xlib_u"
-      my_xdir="$my_gentop/$my_xlib_u"
-
-      func_mkdir_p "$my_xdir"
-
-      case $host in
-      *-darwin*)
-        func_verbose "Extracting $my_xabs"
-        # Do not bother doing anything if just a dry run
-        $opt_dry_run || {
-          darwin_orig_dir=`pwd`
-          cd $my_xdir || exit $?
-          darwin_archive=$my_xabs
-          darwin_curdir=`pwd`
-          darwin_base_archive=`basename "$darwin_archive"`
-          darwin_arches=`$LIPO -info "$darwin_archive" 2>/dev/null | $GREP Architectures 2>/dev/null || true`
-          if test -n "$darwin_arches"; then
-            darwin_arches=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'`
-            darwin_arch=
-            func_verbose "$darwin_base_archive has multiple architectures $darwin_arches"
-            for darwin_arch in  $darwin_arches ; do
-              func_mkdir_p "unfat-$$/${darwin_base_archive}-${darwin_arch}"
-              $LIPO -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}"
-              cd "unfat-$$/${darwin_base_archive}-${darwin_arch}"
-              func_extract_an_archive "`pwd`" "${darwin_base_archive}"
-              cd "$darwin_curdir"
-              $RM "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}"
-            done # $darwin_arches
-            ## Okay now we've a bunch of thin objects, gotta fatten them up :)
-            darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$basename" | sort -u`
-            darwin_file=
-            darwin_files=
-            for darwin_file in $darwin_filelist; do
-              darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP`
-              $LIPO -create -output "$darwin_file" $darwin_files
-            done # $darwin_filelist
-            $RM -rf unfat-$$
-            cd "$darwin_orig_dir"
-          else
-            cd $darwin_orig_dir
-            func_extract_an_archive "$my_xdir" "$my_xabs"
-          fi # $darwin_arches
-        } # !$opt_dry_run
-        ;;
-      *)
-        func_extract_an_archive "$my_xdir" "$my_xabs"
-        ;;
-      esac
-      my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP`
-    done
-
-    func_extract_archives_result="$my_oldobjs"
-}
-
-
-
-# func_emit_wrapper_part1 [arg=no]
-#
-# Emit the first part of a libtool wrapper script on stdout.
-# For more information, see the description associated with
-# func_emit_wrapper(), below.
-func_emit_wrapper_part1 ()
-{
-        func_emit_wrapper_part1_arg1=no
-        if test -n "$1" ; then
-          func_emit_wrapper_part1_arg1=$1
-        fi
-
-        $ECHO "\
-#! $SHELL
-
-# $output - temporary wrapper script for $objdir/$outputname
-# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
-#
-# The $output program cannot be directly executed until all the libtool
-# libraries that it depends on are installed.
-#
-# This wrapper script should never be moved out of the build directory.
-# If it is, it will not operate correctly.
-
-# Sed substitution that helps us do robust quoting.  It backslashifies
-# metacharacters that are still active within double-quoted strings.
-Xsed='${SED} -e 1s/^X//'
-sed_quote_subst='$sed_quote_subst'
-
-# Be Bourne compatible
-if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then
-  emulate sh
-  NULLCMD=:
-  # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which
-  # is contrary to our usage.  Disable this feature.
-  alias -g '\${1+\"\$@\"}'='\"\$@\"'
-  setopt NO_GLOB_SUBST
-else
-  case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac
-fi
-BIN_SH=xpg4; export BIN_SH # for Tru64
-DUALCASE=1; export DUALCASE # for MKS sh
-
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-
-relink_command=\"$relink_command\"
-
-# This environment variable determines our operation mode.
-if test \"\$libtool_install_magic\" = \"$magic\"; then
-  # install mode needs the following variables:
-  generated_by_libtool_version='$macro_version'
-  notinst_deplibs='$notinst_deplibs'
-else
-  # When we are sourced in execute mode, \$file and \$ECHO are already set.
-  if test \"\$libtool_execute_magic\" != \"$magic\"; then
-    ECHO=\"$qecho\"
-    file=\"\$0\"
-    # Make sure echo works.
-    if test \"X\$1\" = X--no-reexec; then
-      # Discard the --no-reexec flag, and continue.
-      shift
-    elif test \"X\`{ \$ECHO '\t'; } 2>/dev/null\`\" = 'X\t'; then
-      # Yippee, \$ECHO works!
-      :
-    else
-      # Restart under the correct shell, and then maybe \$ECHO will work.
-      exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"}
-    fi
-  fi\
-"
-        $ECHO "\
-
-  # Find the directory that this script lives in.
-  thisdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\`
-  test \"x\$thisdir\" = \"x\$file\" && thisdir=.
-
-  # Follow symbolic links until we get to the real thisdir.
-  file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\`
-  while test -n \"\$file\"; do
-    destdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\`
-
-    # If there was a directory component, then change thisdir.
-    if test \"x\$destdir\" != \"x\$file\"; then
-      case \"\$destdir\" in
-      [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;;
-      *) thisdir=\"\$thisdir/\$destdir\" ;;
-      esac
-    fi
-
-    file=\`\$ECHO \"X\$file\" | \$Xsed -e 's%^.*/%%'\`
-    file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\`
-  done
-"
-}
-# end: func_emit_wrapper_part1
-
-# func_emit_wrapper_part2 [arg=no]
-#
-# Emit the second part of a libtool wrapper script on stdout.
-# For more information, see the description associated with
-# func_emit_wrapper(), below.
-func_emit_wrapper_part2 ()
-{
-        func_emit_wrapper_part2_arg1=no
-        if test -n "$1" ; then
-          func_emit_wrapper_part2_arg1=$1
-        fi
-
-        $ECHO "\
-
-  # Usually 'no', except on cygwin/mingw when embedded into
-  # the cwrapper.
-  WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_part2_arg1
-  if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then
-    # special case for '.'
-    if test \"\$thisdir\" = \".\"; then
-      thisdir=\`pwd\`
-    fi
-    # remove .libs from thisdir
-    case \"\$thisdir\" in
-    *[\\\\/]$objdir ) thisdir=\`\$ECHO \"X\$thisdir\" | \$Xsed -e 's%[\\\\/][^\\\\/]*$%%'\` ;;
-    $objdir )   thisdir=. ;;
-    esac
-  fi
-
-  # Try to get the absolute directory name.
-  absdir=\`cd \"\$thisdir\" && pwd\`
-  test -n \"\$absdir\" && thisdir=\"\$absdir\"
-"
-
-        if test "$fast_install" = yes; then
-          $ECHO "\
-  program=lt-'$outputname'$exeext
-  progdir=\"\$thisdir/$objdir\"
-
-  if test ! -f \"\$progdir/\$program\" ||
-     { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\
-       test \"X\$file\" != \"X\$progdir/\$program\"; }; then
-
-    file=\"\$\$-\$program\"
-
-    if test ! -d \"\$progdir\"; then
-      $MKDIR \"\$progdir\"
-    else
-      $RM \"\$progdir/\$file\"
-    fi"
-
-          $ECHO "\
-
-    # relink executable if necessary
-    if test -n \"\$relink_command\"; then
-      if relink_command_output=\`eval \$relink_command 2>&1\`; then :
-      else
-        $ECHO \"\$relink_command_output\" >&2
-        $RM \"\$progdir/\$file\"
-        exit 1
-      fi
-    fi
-
-    $MV \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null ||
-    { $RM \"\$progdir/\$program\";
-      $MV \"\$progdir/\$file\" \"\$progdir/\$program\"; }
-    $RM \"\$progdir/\$file\"
-  fi"
-        else
-          $ECHO "\
-  program='$outputname'
-  progdir=\"\$thisdir/$objdir\"
-"
-        fi
-
-        $ECHO "\
-
-  if test -f \"\$progdir/\$program\"; then"
-
-        # Export our shlibpath_var if we have one.
-        if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
-          $ECHO "\
-    # Add our own library path to $shlibpath_var
-    $shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
-
-    # Some systems cannot cope with colon-terminated $shlibpath_var
-    # The second colon is a workaround for a bug in BeOS R4 sed
-    $shlibpath_var=\`\$ECHO \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\`
-
-    export $shlibpath_var
-"
-        fi
-
-        # fixup the dll searchpath if we need to.
-        if test -n "$dllsearchpath"; then
-          $ECHO "\
-    # Add the dll search path components to the executable PATH
-    PATH=$dllsearchpath:\$PATH
-"
-        fi
-
-        $ECHO "\
-    if test \"\$libtool_execute_magic\" != \"$magic\"; then
-      # Run the actual program with our arguments.
-"
-        case $host in
-        # Backslashes separate directories on plain windows
-        *-*-mingw | *-*-os2* | *-cegcc*)
-          $ECHO "\
-      exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
-"
-          ;;
-
-        *)
-          $ECHO "\
-      exec \"\$progdir/\$program\" \${1+\"\$@\"}
-"
-          ;;
-        esac
-        $ECHO "\
-      \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2
-      exit 1
-    fi
-  else
-    # The program doesn't exist.
-    \$ECHO \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2
-    \$ECHO \"This script is just a wrapper for \$program.\" 1>&2
-    $ECHO \"See the $PACKAGE documentation for more information.\" 1>&2
-    exit 1
-  fi
-fi\
-"
-}
-# end: func_emit_wrapper_part2
-
-
-# func_emit_wrapper [arg=no]
-#
-# Emit a libtool wrapper script on stdout.
-# Don't directly open a file because we may want to
-# incorporate the script contents within a cygwin/mingw
-# wrapper executable.  Must ONLY be called from within
-# func_mode_link because it depends on a number of variables
-# set therein.
-#
-# ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR
-# variable will take.  If 'yes', then the emitted script
-# will assume that the directory in which it is stored is
-# the $objdir directory.  This is a cygwin/mingw-specific
-# behavior.
-func_emit_wrapper ()
-{
-        func_emit_wrapper_arg1=no
-        if test -n "$1" ; then
-          func_emit_wrapper_arg1=$1
-        fi
-
-        # split this up so that func_emit_cwrapperexe_src
-        # can call each part independently.
-        func_emit_wrapper_part1 "${func_emit_wrapper_arg1}"
-        func_emit_wrapper_part2 "${func_emit_wrapper_arg1}"
-}
-
-
-# func_to_host_path arg
-#
-# Convert paths to host format when used with build tools.
-# Intended for use with "native" mingw (where libtool itself
-# is running under the msys shell), or in the following cross-
-# build environments:
-#    $build          $host
-#    mingw (msys)    mingw  [e.g. native]
-#    cygwin          mingw
-#    *nix + wine     mingw
-# where wine is equipped with the `winepath' executable.
-# In the native mingw case, the (msys) shell automatically
-# converts paths for any non-msys applications it launches,
-# but that facility isn't available from inside the cwrapper.
-# Similar accommodations are necessary for $host mingw and
-# $build cygwin.  Calling this function does no harm for other
-# $host/$build combinations not listed above.
-#
-# ARG is the path (on $build) that should be converted to
-# the proper representation for $host. The result is stored
-# in $func_to_host_path_result.
-func_to_host_path ()
-{
-  func_to_host_path_result="$1"
-  if test -n "$1" ; then
-    case $host in
-      *mingw* )
-        lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
-        case $build in
-          *mingw* ) # actually, msys
-            # awkward: cmd appends spaces to result
-            lt_sed_strip_trailing_spaces="s/[ ]*\$//"
-            func_to_host_path_tmp1=`( cmd //c echo "$1" |\
-              $SED -e "$lt_sed_strip_trailing_spaces" ) 2>/dev/null || echo ""`
-            func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\
-              $SED -e "$lt_sed_naive_backslashify"`
-            ;;
-          *cygwin* )
-            func_to_host_path_tmp1=`cygpath -w "$1"`
-            func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\
-              $SED -e "$lt_sed_naive_backslashify"`
-            ;;
-          * )
-            # Unfortunately, winepath does not exit with a non-zero
-            # error code, so we are forced to check the contents of
-            # stdout. On the other hand, if the command is not
-            # found, the shell will set an exit code of 127 and print
-            # *an error message* to stdout. So we must check for both
-            # error code of zero AND non-empty stdout, which explains
-            # the odd construction:
-            func_to_host_path_tmp1=`winepath -w "$1" 2>/dev/null`
-            if test "$?" -eq 0 && test -n "${func_to_host_path_tmp1}"; then
-              func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\
-                $SED -e "$lt_sed_naive_backslashify"`
-            else
-              # Allow warning below.
-              func_to_host_path_result=""
-            fi
-            ;;
-        esac
-        if test -z "$func_to_host_path_result" ; then
-          func_error "Could not determine host path corresponding to"
-          func_error "  '$1'"
-          func_error "Continuing, but uninstalled executables may not work."
-          # Fallback:
-          func_to_host_path_result="$1"
-        fi
-        ;;
-    esac
-  fi
-}
-# end: func_to_host_path
-
-# func_to_host_pathlist arg
-#
-# Convert pathlists to host format when used with build tools.
-# See func_to_host_path(), above. This function supports the
-# following $build/$host combinations (but does no harm for
-# combinations not listed here):
-#    $build          $host
-#    mingw (msys)    mingw  [e.g. native]
-#    cygwin          mingw
-#    *nix + wine     mingw
-#
-# Path separators are also converted from $build format to
-# $host format. If ARG begins or ends with a path separator
-# character, it is preserved (but converted to $host format)
-# on output.
-#
-# ARG is a pathlist (on $build) that should be converted to
-# the proper representation on $host. The result is stored
-# in $func_to_host_pathlist_result.
-func_to_host_pathlist ()
-{
-  func_to_host_pathlist_result="$1"
-  if test -n "$1" ; then
-    case $host in
-      *mingw* )
-        lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
-        # Remove leading and trailing path separator characters from
-        # ARG. msys behavior is inconsistent here, cygpath turns them
-        # into '.;' and ';.', and winepath ignores them completely.
-        func_to_host_pathlist_tmp2="$1"
-        # Once set for this call, this variable should not be
-        # reassigned. It is used in tha fallback case.
-        func_to_host_pathlist_tmp1=`echo "$func_to_host_pathlist_tmp2" |\
-          $SED -e 's|^:*||' -e 's|:*$||'`
-        case $build in
-          *mingw* ) # Actually, msys.
-            # Awkward: cmd appends spaces to result.
-            lt_sed_strip_trailing_spaces="s/[ ]*\$//"
-            func_to_host_pathlist_tmp2=`( cmd //c echo "$func_to_host_pathlist_tmp1" |\
-              $SED -e "$lt_sed_strip_trailing_spaces" ) 2>/dev/null || echo ""`
-            func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp2" |\
-              $SED -e "$lt_sed_naive_backslashify"`
-            ;;
-          *cygwin* )
-            func_to_host_pathlist_tmp2=`cygpath -w -p "$func_to_host_pathlist_tmp1"`
-            func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp2" |\
-              $SED -e "$lt_sed_naive_backslashify"`
-            ;;
-          * )
-            # unfortunately, winepath doesn't convert pathlists
-            func_to_host_pathlist_result=""
-            func_to_host_pathlist_oldIFS=$IFS
-            IFS=:
-            for func_to_host_pathlist_f in $func_to_host_pathlist_tmp1 ; do
-              IFS=$func_to_host_pathlist_oldIFS
-              if test -n "$func_to_host_pathlist_f" ; then
-                func_to_host_path "$func_to_host_pathlist_f"
-                if test -n "$func_to_host_path_result" ; then
-                  if test -z "$func_to_host_pathlist_result" ; then
-                    func_to_host_pathlist_result="$func_to_host_path_result"
-                  else
-                    func_to_host_pathlist_result="$func_to_host_pathlist_result;$func_to_host_path_result"
-                  fi
-                fi
-              fi
-              IFS=:
-            done
-            IFS=$func_to_host_pathlist_oldIFS
-            ;;
-        esac
-        if test -z "$func_to_host_pathlist_result" ; then
-          func_error "Could not determine the host path(s) corresponding to"
-          func_error "  '$1'"
-          func_error "Continuing, but uninstalled executables may not work."
-          # Fallback. This may break if $1 contains DOS-style drive
-          # specifications. The fix is not to complicate the expression
-          # below, but for the user to provide a working wine installation
-          # with winepath so that path translation in the cross-to-mingw
-          # case works properly.
-          lt_replace_pathsep_nix_to_dos="s|:|;|g"
-          func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp1" |\
-            $SED -e "$lt_replace_pathsep_nix_to_dos"`
-        fi
-        # Now, add the leading and trailing path separators back
-        case "$1" in
-          :* ) func_to_host_pathlist_result=";$func_to_host_pathlist_result"
-            ;;
-        esac
-        case "$1" in
-          *: ) func_to_host_pathlist_result="$func_to_host_pathlist_result;"
-            ;;
-        esac
-        ;;
-    esac
-  fi
-}
-# end: func_to_host_pathlist
-
-# func_emit_cwrapperexe_src
-# emit the source code for a wrapper executable on stdout
-# Must ONLY be called from within func_mode_link because
-# it depends on a number of variable set therein.
-func_emit_cwrapperexe_src ()
-{
-        cat <<EOF
-
-/* $cwrappersource - temporary wrapper executable for $objdir/$outputname
-   Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
-
-   The $output program cannot be directly executed until all the libtool
-   libraries that it depends on are installed.
-
-   This wrapper executable should never be moved out of the build directory.
-   If it is, it will not operate correctly.
-
-   Currently, it simply execs the wrapper *script* "$SHELL $output",
-   but could eventually absorb all of the scripts functionality and
-   exec $objdir/$outputname directly.
-*/
-EOF
-            cat <<"EOF"
-#include <stdio.h>
-#include <stdlib.h>
-#ifdef _MSC_VER
-# include <direct.h>
-# include <process.h>
-# include <io.h>
-# define setmode _setmode
-#else
-# include <unistd.h>
-# include <stdint.h>
-# ifdef __CYGWIN__
-#  include <io.h>
-#  define HAVE_SETENV
-#  ifdef __STRICT_ANSI__
-char *realpath (const char *, char *);
-int putenv (char *);
-int setenv (const char *, const char *, int);
-#  endif
-# endif
-#endif
-#include <malloc.h>
-#include <stdarg.h>
-#include <assert.h>
-#include <string.h>
-#include <ctype.h>
-#include <errno.h>
-#include <fcntl.h>
-#include <sys/stat.h>
-
-#if defined(PATH_MAX)
-# define LT_PATHMAX PATH_MAX
-#elif defined(MAXPATHLEN)
-# define LT_PATHMAX MAXPATHLEN
-#else
-# define LT_PATHMAX 1024
-#endif
-
-#ifndef S_IXOTH
-# define S_IXOTH 0
-#endif
-#ifndef S_IXGRP
-# define S_IXGRP 0
-#endif
-
-#ifdef _MSC_VER
-# define S_IXUSR _S_IEXEC
-# define stat _stat
-# ifndef _INTPTR_T_DEFINED
-#  define intptr_t int
-# endif
-#endif
-
-#ifndef DIR_SEPARATOR
-# define DIR_SEPARATOR '/'
-# define PATH_SEPARATOR ':'
-#endif
-
-#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \
-  defined (__OS2__)
-# define HAVE_DOS_BASED_FILE_SYSTEM
-# define FOPEN_WB "wb"
-# ifndef DIR_SEPARATOR_2
-#  define DIR_SEPARATOR_2 '\\'
-# endif
-# ifndef PATH_SEPARATOR_2
-#  define PATH_SEPARATOR_2 ';'
-# endif
-#endif
-
-#ifndef DIR_SEPARATOR_2
-# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR)
-#else /* DIR_SEPARATOR_2 */
-# define IS_DIR_SEPARATOR(ch) \
-        (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2))
-#endif /* DIR_SEPARATOR_2 */
-
-#ifndef PATH_SEPARATOR_2
-# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR)
-#else /* PATH_SEPARATOR_2 */
-# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2)
-#endif /* PATH_SEPARATOR_2 */
-
-#ifdef __CYGWIN__
-# define FOPEN_WB "wb"
-#endif
-
-#ifndef FOPEN_WB
-# define FOPEN_WB "w"
-#endif
-#ifndef _O_BINARY
-# define _O_BINARY 0
-#endif
-
-#define XMALLOC(type, num)      ((type *) xmalloc ((num) * sizeof(type)))
-#define XFREE(stale) do { \
-  if (stale) { free ((void *) stale); stale = 0; } \
-} while (0)
-
-#undef LTWRAPPER_DEBUGPRINTF
-#if defined DEBUGWRAPPER
-# define LTWRAPPER_DEBUGPRINTF(args) ltwrapper_debugprintf args
-static void
-ltwrapper_debugprintf (const char *fmt, ...)
-{
-    va_list args;
-    va_start (args, fmt);
-    (void) vfprintf (stderr, fmt, args);
-    va_end (args);
-}
-#else
-# define LTWRAPPER_DEBUGPRINTF(args)
-#endif
-
-const char *program_name = NULL;
-
-void *xmalloc (size_t num);
-char *xstrdup (const char *string);
-const char *base_name (const char *name);
-char *find_executable (const char *wrapper);
-char *chase_symlinks (const char *pathspec);
-int make_executable (const char *path);
-int check_executable (const char *path);
-char *strendzap (char *str, const char *pat);
-void lt_fatal (const char *message, ...);
-void lt_setenv (const char *name, const char *value);
-char *lt_extend_str (const char *orig_value, const char *add, int to_end);
-void lt_opt_process_env_set (const char *arg);
-void lt_opt_process_env_prepend (const char *arg);
-void lt_opt_process_env_append (const char *arg);
-int lt_split_name_value (const char *arg, char** name, char** value);
-void lt_update_exe_path (const char *name, const char *value);
-void lt_update_lib_path (const char *name, const char *value);
-
-static const char *script_text_part1 =
-EOF
-
-            func_emit_wrapper_part1 yes |
-                $SED -e 's/\([\\"]\)/\\\1/g' \
-                     -e 's/^/  "/' -e 's/$/\\n"/'
-            echo ";"
-            cat <<EOF
-
-static const char *script_text_part2 =
-EOF
-            func_emit_wrapper_part2 yes |
-                $SED -e 's/\([\\"]\)/\\\1/g' \
-                     -e 's/^/  "/' -e 's/$/\\n"/'
-            echo ";"
-
-            cat <<EOF
-const char * MAGIC_EXE = "$magic_exe";
-const char * LIB_PATH_VARNAME = "$shlibpath_var";
-EOF
-
-            if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
-              func_to_host_pathlist "$temp_rpath"
-              cat <<EOF
-const char * LIB_PATH_VALUE   = "$func_to_host_pathlist_result";
-EOF
-            else
-              cat <<"EOF"
-const char * LIB_PATH_VALUE   = "";
-EOF
-            fi
-
-            if test -n "$dllsearchpath"; then
-              func_to_host_pathlist "$dllsearchpath:"
-              cat <<EOF
-const char * EXE_PATH_VARNAME = "PATH";
-const char * EXE_PATH_VALUE   = "$func_to_host_pathlist_result";
-EOF
-            else
-              cat <<"EOF"
-const char * EXE_PATH_VARNAME = "";
-const char * EXE_PATH_VALUE   = "";
-EOF
-            fi
-
-            if test "$fast_install" = yes; then
-              cat <<EOF
-const char * TARGET_PROGRAM_NAME = "lt-$outputname"; /* hopefully, no .exe */
-EOF
-            else
-              cat <<EOF
-const char * TARGET_PROGRAM_NAME = "$outputname"; /* hopefully, no .exe */
-EOF
-            fi
-
-
-            cat <<"EOF"
-
-#define LTWRAPPER_OPTION_PREFIX         "--lt-"
-#define LTWRAPPER_OPTION_PREFIX_LENGTH  5
-
-static const size_t opt_prefix_len         = LTWRAPPER_OPTION_PREFIX_LENGTH;
-static const char *ltwrapper_option_prefix = LTWRAPPER_OPTION_PREFIX;
-
-static const char *dumpscript_opt       = LTWRAPPER_OPTION_PREFIX "dump-script";
-
-static const size_t env_set_opt_len     = LTWRAPPER_OPTION_PREFIX_LENGTH + 7;
-static const char *env_set_opt          = LTWRAPPER_OPTION_PREFIX "env-set";
-  /* argument is putenv-style "foo=bar", value of foo is set to bar */
-
-static const size_t env_prepend_opt_len = LTWRAPPER_OPTION_PREFIX_LENGTH + 11;
-static const char *env_prepend_opt      = LTWRAPPER_OPTION_PREFIX "env-prepend";
-  /* argument is putenv-style "foo=bar", new value of foo is bar${foo} */
-
-static const size_t env_append_opt_len  = LTWRAPPER_OPTION_PREFIX_LENGTH + 10;
-static const char *env_append_opt       = LTWRAPPER_OPTION_PREFIX "env-append";
-  /* argument is putenv-style "foo=bar", new value of foo is ${foo}bar */
-
-int
-main (int argc, char *argv[])
-{
-  char **newargz;
-  int  newargc;
-  char *tmp_pathspec;
-  char *actual_cwrapper_path;
-  char *actual_cwrapper_name;
-  char *target_name;
-  char *lt_argv_zero;
-  intptr_t rval = 127;
-
-  int i;
-
-  program_name = (char *) xstrdup (base_name (argv[0]));
-  LTWRAPPER_DEBUGPRINTF (("(main) argv[0]      : %s\n", argv[0]));
-  LTWRAPPER_DEBUGPRINTF (("(main) program_name : %s\n", program_name));
-
-  /* very simple arg parsing; don't want to rely on getopt */
-  for (i = 1; i < argc; i++)
-    {
-      if (strcmp (argv[i], dumpscript_opt) == 0)
-        {
-EOF
-            case "$host" in
-              *mingw* | *cygwin* )
-                # make stdout use "unix" line endings
-                echo "          setmode(1,_O_BINARY);"
-                ;;
-              esac
-
-            cat <<"EOF"
-          printf ("%s", script_text_part1);
-          printf ("%s", script_text_part2);
-          return 0;
-        }
-    }
-
-  newargz = XMALLOC (char *, argc + 1);
-  tmp_pathspec = find_executable (argv[0]);
-  if (tmp_pathspec == NULL)
-    lt_fatal ("Couldn't find %s", argv[0]);
-  LTWRAPPER_DEBUGPRINTF (("(main) found exe (before symlink chase) at : %s\n",
-                          tmp_pathspec));
-
-  actual_cwrapper_path = chase_symlinks (tmp_pathspec);
-  LTWRAPPER_DEBUGPRINTF (("(main) found exe (after symlink chase) at : %s\n",
-                          actual_cwrapper_path));
-  XFREE (tmp_pathspec);
-
-  actual_cwrapper_name = xstrdup( base_name (actual_cwrapper_path));
-  strendzap (actual_cwrapper_path, actual_cwrapper_name);
-
-  /* wrapper name transforms */
-  strendzap (actual_cwrapper_name, ".exe");
-  tmp_pathspec = lt_extend_str (actual_cwrapper_name, ".exe", 1);
-  XFREE (actual_cwrapper_name);
-  actual_cwrapper_name = tmp_pathspec;
-  tmp_pathspec = 0;
-
-  /* target_name transforms -- use actual target program name; might have lt- prefix */
-  target_name = xstrdup (base_name (TARGET_PROGRAM_NAME));
-  strendzap (target_name, ".exe");
-  tmp_pathspec = lt_extend_str (target_name, ".exe", 1);
-  XFREE (target_name);
-  target_name = tmp_pathspec;
-  tmp_pathspec = 0;
-
-  LTWRAPPER_DEBUGPRINTF (("(main) libtool target name: %s\n",
-                          target_name));
-EOF
-
-            cat <<EOF
-  newargz[0] =
-    XMALLOC (char, (strlen (actual_cwrapper_path) +
-                    strlen ("$objdir") + 1 + strlen (actual_cwrapper_name) + 1));
-  strcpy (newargz[0], actual_cwrapper_path);
-  strcat (newargz[0], "$objdir");
-  strcat (newargz[0], "/");
-EOF
-
-            cat <<"EOF"
-  /* stop here, and copy so we don't have to do this twice */
-  tmp_pathspec = xstrdup (newargz[0]);
-
-  /* do NOT want the lt- prefix here, so use actual_cwrapper_name */
-  strcat (newargz[0], actual_cwrapper_name);
-
-  /* DO want the lt- prefix here if it exists, so use target_name */
-  lt_argv_zero = lt_extend_str (tmp_pathspec, target_name, 1);
-  XFREE (tmp_pathspec);
-  tmp_pathspec = NULL;
-EOF
-
-            case $host_os in
-              mingw*)
-            cat <<"EOF"
-  {
-    char* p;
-    while ((p = strchr (newargz[0], '\\')) != NULL)
-      {
-        *p = '/';
-      }
-    while ((p = strchr (lt_argv_zero, '\\')) != NULL)
-      {
-        *p = '/';
-      }
-  }
-EOF
-            ;;
-            esac
-
-            cat <<"EOF"
-  XFREE (target_name);
-  XFREE (actual_cwrapper_path);
-  XFREE (actual_cwrapper_name);
-
-  lt_setenv ("BIN_SH", "xpg4"); /* for Tru64 */
-  lt_setenv ("DUALCASE", "1");  /* for MSK sh */
-  lt_update_lib_path (LIB_PATH_VARNAME, LIB_PATH_VALUE);
-  lt_update_exe_path (EXE_PATH_VARNAME, EXE_PATH_VALUE);
-
-  newargc=0;
-  for (i = 1; i < argc; i++)
-    {
-      if (strncmp (argv[i], env_set_opt, env_set_opt_len) == 0)
-        {
-          if (argv[i][env_set_opt_len] == '=')
-            {
-              const char *p = argv[i] + env_set_opt_len + 1;
-              lt_opt_process_env_set (p);
-            }
-          else if (argv[i][env_set_opt_len] == '\0' && i + 1 < argc)
-            {
-              lt_opt_process_env_set (argv[++i]); /* don't copy */
-            }
-          else
-            lt_fatal ("%s missing required argument", env_set_opt);
-          continue;
-        }
-      if (strncmp (argv[i], env_prepend_opt, env_prepend_opt_len) == 0)
-        {
-          if (argv[i][env_prepend_opt_len] == '=')
-            {
-              const char *p = argv[i] + env_prepend_opt_len + 1;
-              lt_opt_process_env_prepend (p);
-            }
-          else if (argv[i][env_prepend_opt_len] == '\0' && i + 1 < argc)
-            {
-              lt_opt_process_env_prepend (argv[++i]); /* don't copy */
-            }
-          else
-            lt_fatal ("%s missing required argument", env_prepend_opt);
-          continue;
-        }
-      if (strncmp (argv[i], env_append_opt, env_append_opt_len) == 0)
-        {
-          if (argv[i][env_append_opt_len] == '=')
-            {
-              const char *p = argv[i] + env_append_opt_len + 1;
-              lt_opt_process_env_append (p);
-            }
-          else if (argv[i][env_append_opt_len] == '\0' && i + 1 < argc)
-            {
-              lt_opt_process_env_append (argv[++i]); /* don't copy */
-            }
-          else
-            lt_fatal ("%s missing required argument", env_append_opt);
-          continue;
-        }
-      if (strncmp (argv[i], ltwrapper_option_prefix, opt_prefix_len) == 0)
-        {
-          /* however, if there is an option in the LTWRAPPER_OPTION_PREFIX
-             namespace, but it is not one of the ones we know about and
-             have already dealt with, above (inluding dump-script), then
-             report an error. Otherwise, targets might begin to believe
-             they are allowed to use options in the LTWRAPPER_OPTION_PREFIX
-             namespace. The first time any user complains about this, we'll
-             need to make LTWRAPPER_OPTION_PREFIX a configure-time option
-             or a configure.ac-settable value.
-           */
-          lt_fatal ("Unrecognized option in %s namespace: '%s'",
-                    ltwrapper_option_prefix, argv[i]);
-        }
-      /* otherwise ... */
-      newargz[++newargc] = xstrdup (argv[i]);
-    }
-  newargz[++newargc] = NULL;
-
-  LTWRAPPER_DEBUGPRINTF     (("(main) lt_argv_zero : %s\n", (lt_argv_zero ? lt_argv_zero : "<NULL>")));
-  for (i = 0; i < newargc; i++)
-    {
-      LTWRAPPER_DEBUGPRINTF (("(main) newargz[%d]   : %s\n", i, (newargz[i] ? newargz[i] : "<NULL>")));
-    }
-
-EOF
-
-            case $host_os in
-              mingw*)
-                cat <<"EOF"
-  /* execv doesn't actually work on mingw as expected on unix */
-  rval = _spawnv (_P_WAIT, lt_argv_zero, (const char * const *) newargz);
-  if (rval == -1)
-    {
-      /* failed to start process */
-      LTWRAPPER_DEBUGPRINTF (("(main) failed to launch target \"%s\": errno = %d\n", lt_argv_zero, errno));
-      return 127;
-    }
-  return rval;
-EOF
-                ;;
-              *)
-                cat <<"EOF"
-  execv (lt_argv_zero, newargz);
-  return rval; /* =127, but avoids unused variable warning */
-EOF
-                ;;
-            esac
-
-            cat <<"EOF"
-}
-
-void *
-xmalloc (size_t num)
-{
-  void *p = (void *) malloc (num);
-  if (!p)
-    lt_fatal ("Memory exhausted");
-
-  return p;
-}
-
-char *
-xstrdup (const char *string)
-{
-  return string ? strcpy ((char *) xmalloc (strlen (string) + 1),
-                          string) : NULL;
-}
-
-const char *
-base_name (const char *name)
-{
-  const char *base;
-
-#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
-  /* Skip over the disk name in MSDOS pathnames. */
-  if (isalpha ((unsigned char) name[0]) && name[1] == ':')
-    name += 2;
-#endif
-
-  for (base = name; *name; name++)
-    if (IS_DIR_SEPARATOR (*name))
-      base = name + 1;
-  return base;
-}
-
-int
-check_executable (const char *path)
-{
-  struct stat st;
-
-  LTWRAPPER_DEBUGPRINTF (("(check_executable)  : %s\n",
-                          path ? (*path ? path : "EMPTY!") : "NULL!"));
-  if ((!path) || (!*path))
-    return 0;
-
-  if ((stat (path, &st) >= 0)
-      && (st.st_mode & (S_IXUSR | S_IXGRP | S_IXOTH)))
-    return 1;
-  else
-    return 0;
-}
-
-int
-make_executable (const char *path)
-{
-  int rval = 0;
-  struct stat st;
-
-  LTWRAPPER_DEBUGPRINTF (("(make_executable)   : %s\n",
-                          path ? (*path ? path : "EMPTY!") : "NULL!"));
-  if ((!path) || (!*path))
-    return 0;
-
-  if (stat (path, &st) >= 0)
-    {
-      rval = chmod (path, st.st_mode | S_IXOTH | S_IXGRP | S_IXUSR);
-    }
-  return rval;
-}
-
-/* Searches for the full path of the wrapper.  Returns
-   newly allocated full path name if found, NULL otherwise
-   Does not chase symlinks, even on platforms that support them.
-*/
-char *
-find_executable (const char *wrapper)
-{
-  int has_slash = 0;
-  const char *p;
-  const char *p_next;
-  /* static buffer for getcwd */
-  char tmp[LT_PATHMAX + 1];
-  int tmp_len;
-  char *concat_name;
-
-  LTWRAPPER_DEBUGPRINTF (("(find_executable)   : %s\n",
-                          wrapper ? (*wrapper ? wrapper : "EMPTY!") : "NULL!"));
-
-  if ((wrapper == NULL) || (*wrapper == '\0'))
-    return NULL;
-
-  /* Absolute path? */
-#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
-  if (isalpha ((unsigned char) wrapper[0]) && wrapper[1] == ':')
-    {
-      concat_name = xstrdup (wrapper);
-      if (check_executable (concat_name))
-        return concat_name;
-      XFREE (concat_name);
-    }
-  else
-    {
-#endif
-      if (IS_DIR_SEPARATOR (wrapper[0]))
-        {
-          concat_name = xstrdup (wrapper);
-          if (check_executable (concat_name))
-            return concat_name;
-          XFREE (concat_name);
-        }
-#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
-    }
-#endif
-
-  for (p = wrapper; *p; p++)
-    if (*p == '/')
-      {
-        has_slash = 1;
-        break;
-      }
-  if (!has_slash)
-    {
-      /* no slashes; search PATH */
-      const char *path = getenv ("PATH");
-      if (path != NULL)
-        {
-          for (p = path; *p; p = p_next)
-            {
-              const char *q;
-              size_t p_len;
-              for (q = p; *q; q++)
-                if (IS_PATH_SEPARATOR (*q))
-                  break;
-              p_len = q - p;
-              p_next = (*q == '\0' ? q : q + 1);
-              if (p_len == 0)
-                {
-                  /* empty path: current directory */
-                  if (getcwd (tmp, LT_PATHMAX) == NULL)
-                    lt_fatal ("getcwd failed");
-                  tmp_len = strlen (tmp);
-                  concat_name =
-                    XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
-                  memcpy (concat_name, tmp, tmp_len);
-                  concat_name[tmp_len] = '/';
-                  strcpy (concat_name + tmp_len + 1, wrapper);
-                }
-              else
-                {
-                  concat_name =
-                    XMALLOC (char, p_len + 1 + strlen (wrapper) + 1);
-                  memcpy (concat_name, p, p_len);
-                  concat_name[p_len] = '/';
-                  strcpy (concat_name + p_len + 1, wrapper);
-                }
-              if (check_executable (concat_name))
-                return concat_name;
-              XFREE (concat_name);
-            }
-        }
-      /* not found in PATH; assume curdir */
-    }
-  /* Relative path | not found in path: prepend cwd */
-  if (getcwd (tmp, LT_PATHMAX) == NULL)
-    lt_fatal ("getcwd failed");
-  tmp_len = strlen (tmp);
-  concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
-  memcpy (concat_name, tmp, tmp_len);
-  concat_name[tmp_len] = '/';
-  strcpy (concat_name + tmp_len + 1, wrapper);
-
-  if (check_executable (concat_name))
-    return concat_name;
-  XFREE (concat_name);
-  return NULL;
-}
-
-char *
-chase_symlinks (const char *pathspec)
-{
-#ifndef S_ISLNK
-  return xstrdup (pathspec);
-#else
-  char buf[LT_PATHMAX];
-  struct stat s;
-  char *tmp_pathspec = xstrdup (pathspec);
-  char *p;
-  int has_symlinks = 0;
-  while (strlen (tmp_pathspec) && !has_symlinks)
-    {
-      LTWRAPPER_DEBUGPRINTF (("checking path component for symlinks: %s\n",
-                              tmp_pathspec));
-      if (lstat (tmp_pathspec, &s) == 0)
-        {
-          if (S_ISLNK (s.st_mode) != 0)
-            {
-              has_symlinks = 1;
-              break;
-            }
-
-          /* search backwards for last DIR_SEPARATOR */
-          p = tmp_pathspec + strlen (tmp_pathspec) - 1;
-          while ((p > tmp_pathspec) && (!IS_DIR_SEPARATOR (*p)))
-            p--;
-          if ((p == tmp_pathspec) && (!IS_DIR_SEPARATOR (*p)))
-            {
-              /* no more DIR_SEPARATORS left */
-              break;
-            }
-          *p = '\0';
-        }
-      else
-        {
-          char *errstr = strerror (errno);
-          lt_fatal ("Error accessing file %s (%s)", tmp_pathspec, errstr);
-        }
-    }
-  XFREE (tmp_pathspec);
-
-  if (!has_symlinks)
-    {
-      return xstrdup (pathspec);
-    }
-
-  tmp_pathspec = realpath (pathspec, buf);
-  if (tmp_pathspec == 0)
-    {
-      lt_fatal ("Could not follow symlinks for %s", pathspec);
-    }
-  return xstrdup (tmp_pathspec);
-#endif
-}
-
-char *
-strendzap (char *str, const char *pat)
-{
-  size_t len, patlen;
-
-  assert (str != NULL);
-  assert (pat != NULL);
-
-  len = strlen (str);
-  patlen = strlen (pat);
-
-  if (patlen <= len)
-    {
-      str += len - patlen;
-      if (strcmp (str, pat) == 0)
-        *str = '\0';
-    }
-  return str;
-}
-
-static void
-lt_error_core (int exit_status, const char *mode,
-               const char *message, va_list ap)
-{
-  fprintf (stderr, "%s: %s: ", program_name, mode);
-  vfprintf (stderr, message, ap);
-  fprintf (stderr, ".\n");
-
-  if (exit_status >= 0)
-    exit (exit_status);
-}
-
-void
-lt_fatal (const char *message, ...)
-{
-  va_list ap;
-  va_start (ap, message);
-  lt_error_core (EXIT_FAILURE, "FATAL", message, ap);
-  va_end (ap);
-}
-
-void
-lt_setenv (const char *name, const char *value)
-{
-  LTWRAPPER_DEBUGPRINTF (("(lt_setenv) setting '%s' to '%s'\n",
-                          (name ? name : "<NULL>"),
-                          (value ? value : "<NULL>")));
-  {
-#ifdef HAVE_SETENV
-    /* always make a copy, for consistency with !HAVE_SETENV */
-    char *str = xstrdup (value);
-    setenv (name, str, 1);
-#else
-    int len = strlen (name) + 1 + strlen (value) + 1;
-    char *str = XMALLOC (char, len);
-    sprintf (str, "%s=%s", name, value);
-    if (putenv (str) != EXIT_SUCCESS)
-      {
-        XFREE (str);
-      }
-#endif
-  }
-}
-
-char *
-lt_extend_str (const char *orig_value, const char *add, int to_end)
-{
-  char *new_value;
-  if (orig_value && *orig_value)
-    {
-      int orig_value_len = strlen (orig_value);
-      int add_len = strlen (add);
-      new_value = XMALLOC (char, add_len + orig_value_len + 1);
-      if (to_end)
-        {
-          strcpy (new_value, orig_value);
-          strcpy (new_value + orig_value_len, add);
-        }
-      else
-        {
-          strcpy (new_value, add);
-          strcpy (new_value + add_len, orig_value);
-        }
-    }
-  else
-    {
-      new_value = xstrdup (add);
-    }
-  return new_value;
-}
-
-int
-lt_split_name_value (const char *arg, char** name, char** value)
-{
-  const char *p;
-  int len;
-  if (!arg || !*arg)
-    return 1;
-
-  p = strchr (arg, (int)'=');
-
-  if (!p)
-    return 1;
-
-  *value = xstrdup (++p);
-
-  len = strlen (arg) - strlen (*value);
-  *name = XMALLOC (char, len);
-  strncpy (*name, arg, len-1);
-  (*name)[len - 1] = '\0';
-
-  return 0;
-}
-
-void
-lt_opt_process_env_set (const char *arg)
-{
-  char *name = NULL;
-  char *value = NULL;
-
-  if (lt_split_name_value (arg, &name, &value) != 0)
-    {
-      XFREE (name);
-      XFREE (value);
-      lt_fatal ("bad argument for %s: '%s'", env_set_opt, arg);
-    }
-
-  lt_setenv (name, value);
-  XFREE (name);
-  XFREE (value);
-}
-
-void
-lt_opt_process_env_prepend (const char *arg)
-{
-  char *name = NULL;
-  char *value = NULL;
-  char *new_value = NULL;
-
-  if (lt_split_name_value (arg, &name, &value) != 0)
-    {
-      XFREE (name);
-      XFREE (value);
-      lt_fatal ("bad argument for %s: '%s'", env_prepend_opt, arg);
-    }
-
-  new_value = lt_extend_str (getenv (name), value, 0);
-  lt_setenv (name, new_value);
-  XFREE (new_value);
-  XFREE (name);
-  XFREE (value);
-}
-
-void
-lt_opt_process_env_append (const char *arg)
-{
-  char *name = NULL;
-  char *value = NULL;
-  char *new_value = NULL;
-
-  if (lt_split_name_value (arg, &name, &value) != 0)
-    {
-      XFREE (name);
-      XFREE (value);
-      lt_fatal ("bad argument for %s: '%s'", env_append_opt, arg);
-    }
-
-  new_value = lt_extend_str (getenv (name), value, 1);
-  lt_setenv (name, new_value);
-  XFREE (new_value);
-  XFREE (name);
-  XFREE (value);
-}
-
-void
-lt_update_exe_path (const char *name, const char *value)
-{
-  LTWRAPPER_DEBUGPRINTF (("(lt_update_exe_path) modifying '%s' by prepending '%s'\n",
-                          (name ? name : "<NULL>"),
-                          (value ? value : "<NULL>")));
-
-  if (name && *name && value && *value)
-    {
-      char *new_value = lt_extend_str (getenv (name), value, 0);
-      /* some systems can't cope with a ':'-terminated path #' */
-      int len = strlen (new_value);
-      while (((len = strlen (new_value)) > 0) && IS_PATH_SEPARATOR (new_value[len-1]))
-        {
-          new_value[len-1] = '\0';
-        }
-      lt_setenv (name, new_value);
-      XFREE (new_value);
-    }
-}
-
-void
-lt_update_lib_path (const char *name, const char *value)
-{
-  LTWRAPPER_DEBUGPRINTF (("(lt_update_lib_path) modifying '%s' by prepending '%s'\n",
-                          (name ? name : "<NULL>"),
-                          (value ? value : "<NULL>")));
-
-  if (name && *name && value && *value)
-    {
-      char *new_value = lt_extend_str (getenv (name), value, 0);
-      lt_setenv (name, new_value);
-      XFREE (new_value);
-    }
-}
-
-
-EOF
-}
-# end: func_emit_cwrapperexe_src
-
-# func_mode_link arg...
-func_mode_link ()
-{
-    $opt_debug
-    case $host in
-    *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
-      # It is impossible to link a dll without this setting, and
-      # we shouldn't force the makefile maintainer to figure out
-      # which system we are compiling for in order to pass an extra
-      # flag for every libtool invocation.
-      # allow_undefined=no
-
-      # FIXME: Unfortunately, there are problems with the above when trying
-      # to make a dll which has undefined symbols, in which case not
-      # even a static library is built.  For now, we need to specify
-      # -no-undefined on the libtool link line when we can be certain
-      # that all symbols are satisfied, otherwise we get a static library.
-      allow_undefined=yes
-      ;;
-    *)
-      allow_undefined=yes
-      ;;
-    esac
-    libtool_args=$nonopt
-    base_compile="$nonopt $@"
-    compile_command=$nonopt
-    finalize_command=$nonopt
-
-    compile_rpath=
-    finalize_rpath=
-    compile_shlibpath=
-    finalize_shlibpath=
-    convenience=
-    old_convenience=
-    deplibs=
-    old_deplibs=
-    compiler_flags=
-    linker_flags=
-    dllsearchpath=
-    lib_search_path=`pwd`
-    inst_prefix_dir=
-    new_inherited_linker_flags=
-
-    avoid_version=no
-    dlfiles=
-    dlprefiles=
-    dlself=no
-    export_dynamic=no
-    export_symbols=
-    export_symbols_regex=
-    generated=
-    libobjs=
-    ltlibs=
-    module=no
-    no_install=no
-    objs=
-    non_pic_objects=
-    precious_files_regex=
-    prefer_static_libs=no
-    preload=no
-    prev=
-    prevarg=
-    release=
-    rpath=
-    xrpath=
-    perm_rpath=
-    temp_rpath=
-    thread_safe=no
-    vinfo=
-    vinfo_number=no
-    weak_libs=
-    single_module="${wl}-single_module"
-    func_infer_tag $base_compile
-
-    # We need to know -static, to get the right output filenames.
-    for arg
-    do
-      case $arg in
-      -shared)
-        test "$build_libtool_libs" != yes && \
-          func_fatal_configuration "can not build a shared library"
-        build_old_libs=no
-        break
-        ;;
-      -all-static | -static | -static-libtool-libs)
-        case $arg in
-        -all-static)
-          if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then
-            func_warning "complete static linking is impossible in this configuration"
-          fi
-          if test -n "$link_static_flag"; then
-            dlopen_self=$dlopen_self_static
-          fi
-          prefer_static_libs=yes
-          ;;
-        -static)
-          if test -z "$pic_flag" && test -n "$link_static_flag"; then
-            dlopen_self=$dlopen_self_static
-          fi
-          prefer_static_libs=built
-          ;;
-        -static-libtool-libs)
-          if test -z "$pic_flag" && test -n "$link_static_flag"; then
-            dlopen_self=$dlopen_self_static
-          fi
-          prefer_static_libs=yes
-          ;;
-        esac
-        build_libtool_libs=no
-        build_old_libs=yes
-        break
-        ;;
-      esac
-    done
-
-    # See if our shared archives depend on static archives.
-    test -n "$old_archive_from_new_cmds" && build_old_libs=yes
-
-    # Go through the arguments, transforming them on the way.
-    while test "$#" -gt 0; do
-      arg="$1"
-      shift
-      func_quote_for_eval "$arg"
-      qarg=$func_quote_for_eval_unquoted_result
-      func_append libtool_args " $func_quote_for_eval_result"
-
-      # If the previous option needs an argument, assign it.
-      if test -n "$prev"; then
-        case $prev in
-        output)
-          func_append compile_command " @OUTPUT@"
-          func_append finalize_command " @OUTPUT@"
-          ;;
-        esac
-
-        case $prev in
-        dlfiles|dlprefiles)
-          if test "$preload" = no; then
-            # Add the symbol object into the linking commands.
-            func_append compile_command " @SYMFILE@"
-            func_append finalize_command " @SYMFILE@"
-            preload=yes
-          fi
-          case $arg in
-          *.la | *.lo) ;;  # We handle these cases below.
-          force)
-            if test "$dlself" = no; then
-              dlself=needless
-              export_dynamic=yes
-            fi
-            prev=
-            continue
-            ;;
-          self)
-            if test "$prev" = dlprefiles; then
-              dlself=yes
-            elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then
-              dlself=yes
-            else
-              dlself=needless
-              export_dynamic=yes
-            fi
-            prev=
-            continue
-            ;;
-          *)
-            if test "$prev" = dlfiles; then
-              dlfiles="$dlfiles $arg"
-            else
-              dlprefiles="$dlprefiles $arg"
-            fi
-            prev=
-            continue
-            ;;
-          esac
-          ;;
-        expsyms)
-          export_symbols="$arg"
-          test -f "$arg" \
-            || func_fatal_error "symbol file \`$arg' does not exist"
-          prev=
-          continue
-          ;;
-        expsyms_regex)
-          export_symbols_regex="$arg"
-          prev=
-          continue
-          ;;
-        framework)
-          case $host in
-            *-*-darwin*)
-              case "$deplibs " in
-                *" $qarg.ltframework "*) ;;
-                *) deplibs="$deplibs $qarg.ltframework" # this is fixed later
-                   ;;
-              esac
-              ;;
-          esac
-          prev=
-          continue
-          ;;
-        inst_prefix)
-          inst_prefix_dir="$arg"
-          prev=
-          continue
-          ;;
-        objectlist)
-          if test -f "$arg"; then
-            save_arg=$arg
-            moreargs=
-            for fil in `cat "$save_arg"`
-            do
-#             moreargs="$moreargs $fil"
-              arg=$fil
-              # A libtool-controlled object.
-
-              # Check to see that this really is a libtool object.
-              if func_lalib_unsafe_p "$arg"; then
-                pic_object=
-                non_pic_object=
-
-                # Read the .lo file
-                func_source "$arg"
-
-                if test -z "$pic_object" ||
-                   test -z "$non_pic_object" ||
-                   test "$pic_object" = none &&
-                   test "$non_pic_object" = none; then
-                  func_fatal_error "cannot find name of object for \`$arg'"
-                fi
-
-                # Extract subdirectory from the argument.
-                func_dirname "$arg" "/" ""
-                xdir="$func_dirname_result"
-
-                if test "$pic_object" != none; then
-                  # Prepend the subdirectory the object is found in.
-                  pic_object="$xdir$pic_object"
-
-                  if test "$prev" = dlfiles; then
-                    if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
-                      dlfiles="$dlfiles $pic_object"
-                      prev=
-                      continue
-                    else
-                      # If libtool objects are unsupported, then we need to preload.
-                      prev=dlprefiles
-                    fi
-                  fi
-
-                  # CHECK ME:  I think I busted this.  -Ossama
-                  if test "$prev" = dlprefiles; then
-                    # Preload the old-style object.
-                    dlprefiles="$dlprefiles $pic_object"
-                    prev=
-                  fi
-
-                  # A PIC object.
-                  func_append libobjs " $pic_object"
-                  arg="$pic_object"
-                fi
-
-                # Non-PIC object.
-                if test "$non_pic_object" != none; then
-                  # Prepend the subdirectory the object is found in.
-                  non_pic_object="$xdir$non_pic_object"
-
-                  # A standard non-PIC object
-                  func_append non_pic_objects " $non_pic_object"
-                  if test -z "$pic_object" || test "$pic_object" = none ; then
-                    arg="$non_pic_object"
-                  fi
-                else
-                  # If the PIC object exists, use it instead.
-                  # $xdir was prepended to $pic_object above.
-                  non_pic_object="$pic_object"
-                  func_append non_pic_objects " $non_pic_object"
-                fi
-              else
-                # Only an error if not doing a dry-run.
-                if $opt_dry_run; then
-                  # Extract subdirectory from the argument.
-                  func_dirname "$arg" "/" ""
-                  xdir="$func_dirname_result"
-
-                  func_lo2o "$arg"
-                  pic_object=$xdir$objdir/$func_lo2o_result
-                  non_pic_object=$xdir$func_lo2o_result
-                  func_append libobjs " $pic_object"
-                  func_append non_pic_objects " $non_pic_object"
-                else
-                  func_fatal_error "\`$arg' is not a valid libtool object"
-                fi
-              fi
-            done
-          else
-            func_fatal_error "link input file \`$arg' does not exist"
-          fi
-          arg=$save_arg
-          prev=
-          continue
-          ;;
-        precious_regex)
-          precious_files_regex="$arg"
-          prev=
-          continue
-          ;;
-        release)
-          release="-$arg"
-          prev=
-          continue
-          ;;
-        rpath | xrpath)
-          # We need an absolute path.
-          case $arg in
-          [\\/]* | [A-Za-z]:[\\/]*) ;;
-          *)
-            func_fatal_error "only absolute run-paths are allowed"
-            ;;
-          esac
-          if test "$prev" = rpath; then
-            case "$rpath " in
-            *" $arg "*) ;;
-            *) rpath="$rpath $arg" ;;
-            esac
-          else
-            case "$xrpath " in
-            *" $arg "*) ;;
-            *) xrpath="$xrpath $arg" ;;
-            esac
-          fi
-          prev=
-          continue
-          ;;
-        shrext)
-          shrext_cmds="$arg"
-          prev=
-          continue
-          ;;
-        weak)
-          weak_libs="$weak_libs $arg"
-          prev=
-          continue
-          ;;
-        xcclinker)
-          linker_flags="$linker_flags $qarg"
-          compiler_flags="$compiler_flags $qarg"
-          prev=
-          func_append compile_command " $qarg"
-          func_append finalize_command " $qarg"
-          continue
-          ;;
-        xcompiler)
-          compiler_flags="$compiler_flags $qarg"
-          prev=
-          func_append compile_command " $qarg"
-          func_append finalize_command " $qarg"
-          continue
-          ;;
-        xlinker)
-          linker_flags="$linker_flags $qarg"
-          compiler_flags="$compiler_flags $wl$qarg"
-          prev=
-          func_append compile_command " $wl$qarg"
-          func_append finalize_command " $wl$qarg"
-          continue
-          ;;
-        *)
-          eval "$prev=\"\$arg\""
-          prev=
-          continue
-          ;;
-        esac
-      fi # test -n "$prev"
-
-      prevarg="$arg"
-
-      case $arg in
-      -all-static)
-        if test -n "$link_static_flag"; then
-          # See comment for -static flag below, for more details.
-          func_append compile_command " $link_static_flag"
-          func_append finalize_command " $link_static_flag"
-        fi
-        continue
-        ;;
-
-      -allow-undefined)
-        # FIXME: remove this flag sometime in the future.
-        func_fatal_error "\`-allow-undefined' must not be used because it is the default"
-        ;;
-
-      -avoid-version)
-        avoid_version=yes
-        continue
-        ;;
-
-      -dlopen)
-        prev=dlfiles
-        continue
-        ;;
-
-      -dlpreopen)
-        prev=dlprefiles
-        continue
-        ;;
-
-      -export-dynamic)
-        export_dynamic=yes
-        continue
-        ;;
-
-      -export-symbols | -export-symbols-regex)
-        if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
-          func_fatal_error "more than one -exported-symbols argument is not allowed"
-        fi
-        if test "X$arg" = "X-export-symbols"; then
-          prev=expsyms
-        else
-          prev=expsyms_regex
-        fi
-        continue
-        ;;
-
-      -framework)
-        prev=framework
-        continue
-        ;;
-
-      -inst-prefix-dir)
-        prev=inst_prefix
-        continue
-        ;;
-
-      # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:*
-      # so, if we see these flags be careful not to treat them like -L
-      -L[A-Z][A-Z]*:*)
-        case $with_gcc/$host in
-        no/*-*-irix* | /*-*-irix*)
-          func_append compile_command " $arg"
-          func_append finalize_command " $arg"
-          ;;
-        esac
-        continue
-        ;;
-
-      -L*)
-        func_stripname '-L' '' "$arg"
-        dir=$func_stripname_result
-        if test -z "$dir"; then
-          if test "$#" -gt 0; then
-            func_fatal_error "require no space between \`-L' and \`$1'"
-          else
-            func_fatal_error "need path for \`-L' option"
-          fi
-        fi
-        # We need an absolute path.
-        case $dir in
-        [\\/]* | [A-Za-z]:[\\/]*) ;;
-        *)
-          absdir=`cd "$dir" && pwd`
-          test -z "$absdir" && \
-            func_fatal_error "cannot determine absolute directory name of \`$dir'"
-          dir="$absdir"
-          ;;
-        esac
-        case "$deplibs " in
-        *" -L$dir "*) ;;
-        *)
-          deplibs="$deplibs -L$dir"
-          lib_search_path="$lib_search_path $dir"
-          ;;
-        esac
-        case $host in
-        *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
-          testbindir=`$ECHO "X$dir" | $Xsed -e 's*/lib$*/bin*'`
-          case :$dllsearchpath: in
-          *":$dir:"*) ;;
-          ::) dllsearchpath=$dir;;
-          *) dllsearchpath="$dllsearchpath:$dir";;
-          esac
-          case :$dllsearchpath: in
-          *":$testbindir:"*) ;;
-          ::) dllsearchpath=$testbindir;;
-          *) dllsearchpath="$dllsearchpath:$testbindir";;
-          esac
-          ;;
-        esac
-        continue
-        ;;
-
-      -l*)
-        if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then
-          case $host in
-          *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc*)
-            # These systems don't actually have a C or math library (as such)
-            continue
-            ;;
-          *-*-os2*)
-            # These systems don't actually have a C library (as such)
-            test "X$arg" = "X-lc" && continue
-            ;;
-          *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
-            # Do not include libc due to us having libc/libc_r.
-            test "X$arg" = "X-lc" && continue
-            ;;
-          *-*-rhapsody* | *-*-darwin1.[012])
-            # Rhapsody C and math libraries are in the System framework
-            deplibs="$deplibs System.ltframework"
-            continue
-            ;;
-          *-*-sco3.2v5* | *-*-sco5v6*)
-            # Causes problems with __ctype
-            test "X$arg" = "X-lc" && continue
-            ;;
-          *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
-            # Compiler inserts libc in the correct place for threads to work
-            test "X$arg" = "X-lc" && continue
-            ;;
-          esac
-        elif test "X$arg" = "X-lc_r"; then
-         case $host in
-         *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
-           # Do not include libc_r directly, use -pthread flag.
-           continue
-           ;;
-         esac
-        fi
-        deplibs="$deplibs $arg"
-        continue
-        ;;
-
-      -module)
-        module=yes
-        continue
-        ;;
-
-      # Tru64 UNIX uses -model [arg] to determine the layout of C++
-      # classes, name mangling, and exception handling.
-      # Darwin uses the -arch flag to determine output architecture.
-      -model|-arch|-isysroot)
-        compiler_flags="$compiler_flags $arg"
-        func_append compile_command " $arg"
-        func_append finalize_command " $arg"
-        prev=xcompiler
-        continue
-        ;;
-
-      -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads)
-        compiler_flags="$compiler_flags $arg"
-        func_append compile_command " $arg"
-        func_append finalize_command " $arg"
-        case "$new_inherited_linker_flags " in
-            *" $arg "*) ;;
-            * ) new_inherited_linker_flags="$new_inherited_linker_flags $arg" ;;
-        esac
-        continue
-        ;;
-
-      -multi_module)
-        single_module="${wl}-multi_module"
-        continue
-        ;;
-
-      -no-fast-install)
-        fast_install=no
-        continue
-        ;;
-
-      -no-install)
-        case $host in
-        *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin* | *-cegcc*)
-          # The PATH hackery in wrapper scripts is required on Windows
-          # and Darwin in order for the loader to find any dlls it needs.
-          func_warning "\`-no-install' is ignored for $host"
-          func_warning "assuming \`-no-fast-install' instead"
-          fast_install=no
-          ;;
-        *) no_install=yes ;;
-        esac
-        continue
-        ;;
-
-      -no-undefined)
-        allow_undefined=no
-        continue
-        ;;
-
-      -objectlist)
-        prev=objectlist
-        continue
-        ;;
-
-      -o) prev=output ;;
-
-      -precious-files-regex)
-        prev=precious_regex
-        continue
-        ;;
-
-      -release)
-        prev=release
-        continue
-        ;;
-
-      -rpath)
-        prev=rpath
-        continue
-        ;;
-
-      -R)
-        prev=xrpath
-        continue
-        ;;
-
-      -R*)
-        func_stripname '-R' '' "$arg"
-        dir=$func_stripname_result
-        # We need an absolute path.
-        case $dir in
-        [\\/]* | [A-Za-z]:[\\/]*) ;;
-        *)
-          func_fatal_error "only absolute run-paths are allowed"
-          ;;
-        esac
-        case "$xrpath " in
-        *" $dir "*) ;;
-        *) xrpath="$xrpath $dir" ;;
-        esac
-        continue
-        ;;
-
-      -shared)
-        # The effects of -shared are defined in a previous loop.
-        continue
-        ;;
-
-      -shrext)
-        prev=shrext
-        continue
-        ;;
-
-      -static | -static-libtool-libs)
-        # The effects of -static are defined in a previous loop.
-        # We used to do the same as -all-static on platforms that
-        # didn't have a PIC flag, but the assumption that the effects
-        # would be equivalent was wrong.  It would break on at least
-        # Digital Unix and AIX.
-        continue
-        ;;
-
-      -thread-safe)
-        thread_safe=yes
-        continue
-        ;;
-
-      -version-info)
-        prev=vinfo
-        continue
-        ;;
-
-      -version-number)
-        prev=vinfo
-        vinfo_number=yes
-        continue
-        ;;
-
-      -weak)
-        prev=weak
-        continue
-        ;;
-
-      -Wc,*)
-        func_stripname '-Wc,' '' "$arg"
-        args=$func_stripname_result
-        arg=
-        save_ifs="$IFS"; IFS=','
-        for flag in $args; do
-          IFS="$save_ifs"
-          func_quote_for_eval "$flag"
-          arg="$arg $wl$func_quote_for_eval_result"
-          compiler_flags="$compiler_flags $func_quote_for_eval_result"
-        done
-        IFS="$save_ifs"
-        func_stripname ' ' '' "$arg"
-        arg=$func_stripname_result
-        ;;
-
-      -Wl,*)
-        func_stripname '-Wl,' '' "$arg"
-        args=$func_stripname_result
-        arg=
-        save_ifs="$IFS"; IFS=','
-        for flag in $args; do
-          IFS="$save_ifs"
-          func_quote_for_eval "$flag"
-          arg="$arg $wl$func_quote_for_eval_result"
-          compiler_flags="$compiler_flags $wl$func_quote_for_eval_result"
-          linker_flags="$linker_flags $func_quote_for_eval_result"
-        done
-        IFS="$save_ifs"
-        func_stripname ' ' '' "$arg"
-        arg=$func_stripname_result
-        ;;
-
-      -Xcompiler)
-        prev=xcompiler
-        continue
-        ;;
-
-      -Xlinker)
-        prev=xlinker
-        continue
-        ;;
-
-      -XCClinker)
-        prev=xcclinker
-        continue
-        ;;
-
-      # -msg_* for osf cc
-      -msg_*)
-        func_quote_for_eval "$arg"
-        arg="$func_quote_for_eval_result"
-        ;;
-
-      # -64, -mips[0-9] enable 64-bit mode on the SGI compiler
-      # -r[0-9][0-9]* specifies the processor on the SGI compiler
-      # -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler
-      # +DA*, +DD* enable 64-bit mode on the HP compiler
-      # -q* pass through compiler args for the IBM compiler
-      # -m*, -t[45]*, -txscale* pass through architecture-specific
-      # compiler args for GCC
-      # -F/path gives path to uninstalled frameworks, gcc on darwin
-      # -p, -pg, --coverage, -fprofile-* pass through profiling flag for GCC
-      # @file GCC response files
-      -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \
-      -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*)
-        func_quote_for_eval "$arg"
-        arg="$func_quote_for_eval_result"
-        func_append compile_command " $arg"
-        func_append finalize_command " $arg"
-        compiler_flags="$compiler_flags $arg"
-        continue
-        ;;
-
-      # Some other compiler flag.
-      -* | +*)
-        func_quote_for_eval "$arg"
-        arg="$func_quote_for_eval_result"
-        ;;
-
-      *.$objext)
-        # A standard object.
-        objs="$objs $arg"
-        ;;
-
-      *.lo)
-        # A libtool-controlled object.
-
-        # Check to see that this really is a libtool object.
-        if func_lalib_unsafe_p "$arg"; then
-          pic_object=
-          non_pic_object=
-
-          # Read the .lo file
-          func_source "$arg"
-
-          if test -z "$pic_object" ||
-             test -z "$non_pic_object" ||
-             test "$pic_object" = none &&
-             test "$non_pic_object" = none; then
-            func_fatal_error "cannot find name of object for \`$arg'"
-          fi
-
-          # Extract subdirectory from the argument.
-          func_dirname "$arg" "/" ""
-          xdir="$func_dirname_result"
-
-          if test "$pic_object" != none; then
-            # Prepend the subdirectory the object is found in.
-            pic_object="$xdir$pic_object"
-
-            if test "$prev" = dlfiles; then
-              if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
-                dlfiles="$dlfiles $pic_object"
-                prev=
-                continue
-              else
-                # If libtool objects are unsupported, then we need to preload.
-                prev=dlprefiles
-              fi
-            fi
-
-            # CHECK ME:  I think I busted this.  -Ossama
-            if test "$prev" = dlprefiles; then
-              # Preload the old-style object.
-              dlprefiles="$dlprefiles $pic_object"
-              prev=
-            fi
-
-            # A PIC object.
-            func_append libobjs " $pic_object"
-            arg="$pic_object"
-          fi
-
-          # Non-PIC object.
-          if test "$non_pic_object" != none; then
-            # Prepend the subdirectory the object is found in.
-            non_pic_object="$xdir$non_pic_object"
-
-            # A standard non-PIC object
-            func_append non_pic_objects " $non_pic_object"
-            if test -z "$pic_object" || test "$pic_object" = none ; then
-              arg="$non_pic_object"
-            fi
-          else
-            # If the PIC object exists, use it instead.
-            # $xdir was prepended to $pic_object above.
-            non_pic_object="$pic_object"
-            func_append non_pic_objects " $non_pic_object"
-          fi
-        else
-          # Only an error if not doing a dry-run.
-          if $opt_dry_run; then
-            # Extract subdirectory from the argument.
-            func_dirname "$arg" "/" ""
-            xdir="$func_dirname_result"
-
-            func_lo2o "$arg"
-            pic_object=$xdir$objdir/$func_lo2o_result
-            non_pic_object=$xdir$func_lo2o_result
-            func_append libobjs " $pic_object"
-            func_append non_pic_objects " $non_pic_object"
-          else
-            func_fatal_error "\`$arg' is not a valid libtool object"
-          fi
-        fi
-        ;;
-
-      *.$libext)
-        # An archive.
-        deplibs="$deplibs $arg"
-        old_deplibs="$old_deplibs $arg"
-        continue
-        ;;
-
-      *.la)
-        # A libtool-controlled library.
-
-        if test "$prev" = dlfiles; then
-          # This library was specified with -dlopen.
-          dlfiles="$dlfiles $arg"
-          prev=
-        elif test "$prev" = dlprefiles; then
-          # The library was specified with -dlpreopen.
-          dlprefiles="$dlprefiles $arg"
-          prev=
-        else
-          deplibs="$deplibs $arg"
-        fi
-        continue
-        ;;
-
-      # Some other compiler argument.
-      *)
-        # Unknown arguments in both finalize_command and compile_command need
-        # to be aesthetically quoted because they are evaled later.
-        func_quote_for_eval "$arg"
-        arg="$func_quote_for_eval_result"
-        ;;
-      esac # arg
-
-      # Now actually substitute the argument into the commands.
-      if test -n "$arg"; then
-        func_append compile_command " $arg"
-        func_append finalize_command " $arg"
-      fi
-    done # argument parsing loop
-
-    test -n "$prev" && \
-      func_fatal_help "the \`$prevarg' option requires an argument"
-
-    if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then
-      eval arg=\"$export_dynamic_flag_spec\"
-      func_append compile_command " $arg"
-      func_append finalize_command " $arg"
-    fi
-
-    oldlibs=
-    # calculate the name of the file, without its directory
-    func_basename "$output"
-    outputname="$func_basename_result"
-    libobjs_save="$libobjs"
-
-    if test -n "$shlibpath_var"; then
-      # get the directories listed in $shlibpath_var
-      eval shlib_search_path=\`\$ECHO \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\`
-    else
-      shlib_search_path=
-    fi
-    eval sys_lib_search_path=\"$sys_lib_search_path_spec\"
-    eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"
-
-    func_dirname "$output" "/" ""
-    output_objdir="$func_dirname_result$objdir"
-    # Create the object directory.
-    func_mkdir_p "$output_objdir"
-
-    # Determine the type of output
-    case $output in
-    "")
-      func_fatal_help "you must specify an output file"
-      ;;
-    *.$libext) linkmode=oldlib ;;
-    *.lo | *.$objext) linkmode=obj ;;
-    *.la) linkmode=lib ;;
-    *) linkmode=prog ;; # Anything else should be a program.
-    esac
-
-    specialdeplibs=
-
-    libs=
-    # Find all interdependent deplibs by searching for libraries
-    # that are linked more than once (e.g. -la -lb -la)
-    for deplib in $deplibs; do
-      if $opt_duplicate_deps ; then
-        case "$libs " in
-        *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
-        esac
-      fi
-      libs="$libs $deplib"
-    done
-
-    if test "$linkmode" = lib; then
-      libs="$predeps $libs $compiler_lib_search_path $postdeps"
-
-      # Compute libraries that are listed more than once in $predeps
-      # $postdeps and mark them as special (i.e., whose duplicates are
-      # not to be eliminated).
-      pre_post_deps=
-      if $opt_duplicate_compiler_generated_deps; then
-        for pre_post_dep in $predeps $postdeps; do
-          case "$pre_post_deps " in
-          *" $pre_post_dep "*) specialdeplibs="$specialdeplibs $pre_post_deps" ;;
-          esac
-          pre_post_deps="$pre_post_deps $pre_post_dep"
-        done
-      fi
-      pre_post_deps=
-    fi
-
-    deplibs=
-    newdependency_libs=
-    newlib_search_path=
-    need_relink=no # whether we're linking any uninstalled libtool libraries
-    notinst_deplibs= # not-installed libtool libraries
-    notinst_path= # paths that contain not-installed libtool libraries
-
-    case $linkmode in
-    lib)
-        passes="conv dlpreopen link"
-        for file in $dlfiles $dlprefiles; do
-          case $file in
-          *.la) ;;
-          *)
-            func_fatal_help "libraries can \`-dlopen' only libtool libraries: $file"
-            ;;
-          esac
-        done
-        ;;
-    prog)
-        compile_deplibs=
-        finalize_deplibs=
-        alldeplibs=no
-        newdlfiles=
-        newdlprefiles=
-        passes="conv scan dlopen dlpreopen link"
-        ;;
-    *)  passes="conv"
-        ;;
-    esac
-
-    for pass in $passes; do
-      # The preopen pass in lib mode reverses $deplibs; put it back here
-      # so that -L comes before libs that need it for instance...
-      if test "$linkmode,$pass" = "lib,link"; then
-        ## FIXME: Find the place where the list is rebuilt in the wrong
-        ##        order, and fix it there properly
-        tmp_deplibs=
-        for deplib in $deplibs; do
-          tmp_deplibs="$deplib $tmp_deplibs"
-        done
-        deplibs="$tmp_deplibs"
-      fi
-
-      if test "$linkmode,$pass" = "lib,link" ||
-         test "$linkmode,$pass" = "prog,scan"; then
-        libs="$deplibs"
-        deplibs=
-      fi
-      if test "$linkmode" = prog; then
-        case $pass in
-        dlopen) libs="$dlfiles" ;;
-        dlpreopen) libs="$dlprefiles" ;;
-        link)
-          libs="$deplibs %DEPLIBS%"
-          test "X$link_all_deplibs" != Xno && libs="$libs $dependency_libs"
-          ;;
-        esac
-      fi
-      if test "$linkmode,$pass" = "lib,dlpreopen"; then
-        # Collect and forward deplibs of preopened libtool libs
-        for lib in $dlprefiles; do
-          # Ignore non-libtool-libs
-          dependency_libs=
-          case $lib in
-          *.la) func_source "$lib" ;;
-          esac
-
-          # Collect preopened libtool deplibs, except any this library
-          # has declared as weak libs
-          for deplib in $dependency_libs; do
-            deplib_base=`$ECHO "X$deplib" | $Xsed -e "$basename"`
-            case " $weak_libs " in
-            *" $deplib_base "*) ;;
-            *) deplibs="$deplibs $deplib" ;;
-            esac
-          done
-        done
-        libs="$dlprefiles"
-      fi
-      if test "$pass" = dlopen; then
-        # Collect dlpreopened libraries
-        save_deplibs="$deplibs"
-        deplibs=
-      fi
-
-      for deplib in $libs; do
-        lib=
-        found=no
-        case $deplib in
-        -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads)
-          if test "$linkmode,$pass" = "prog,link"; then
-            compile_deplibs="$deplib $compile_deplibs"
-            finalize_deplibs="$deplib $finalize_deplibs"
-          else
-            compiler_flags="$compiler_flags $deplib"
-            if test "$linkmode" = lib ; then
-                case "$new_inherited_linker_flags " in
-                    *" $deplib "*) ;;
-                    * ) new_inherited_linker_flags="$new_inherited_linker_flags $deplib" ;;
-                esac
-            fi
-          fi
-          continue
-          ;;
-        -l*)
-          if test "$linkmode" != lib && test "$linkmode" != prog; then
-            func_warning "\`-l' is ignored for archives/objects"
-            continue
-          fi
-          func_stripname '-l' '' "$deplib"
-          name=$func_stripname_result
-          if test "$linkmode" = lib; then
-            searchdirs="$newlib_search_path $lib_search_path $compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path"
-          else
-            searchdirs="$newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path"
-          fi
-          for searchdir in $searchdirs; do
-            for search_ext in .la $std_shrext .so .a; do
-              # Search the libtool library
-              lib="$searchdir/lib${name}${search_ext}"
-              if test -f "$lib"; then
-                if test "$search_ext" = ".la"; then
-                  found=yes
-                else
-                  found=no
-                fi
-                break 2
-              fi
-            done
-          done
-          if test "$found" != yes; then
-            # deplib doesn't seem to be a libtool library
-            if test "$linkmode,$pass" = "prog,link"; then
-              compile_deplibs="$deplib $compile_deplibs"
-              finalize_deplibs="$deplib $finalize_deplibs"
-            else
-              deplibs="$deplib $deplibs"
-              test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
-            fi
-            continue
-          else # deplib is a libtool library
-            # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib,
-            # We need to do some special things here, and not later.
-            if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
-              case " $predeps $postdeps " in
-              *" $deplib "*)
-                if func_lalib_p "$lib"; then
-                  library_names=
-                  old_library=
-                  func_source "$lib"
-                  for l in $old_library $library_names; do
-                    ll="$l"
-                  done
-                  if test "X$ll" = "X$old_library" ; then # only static version available
-                    found=no
-                    func_dirname "$lib" "" "."
-                    ladir="$func_dirname_result"
-                    lib=$ladir/$old_library
-                    if test "$linkmode,$pass" = "prog,link"; then
-                      compile_deplibs="$deplib $compile_deplibs"
-                      finalize_deplibs="$deplib $finalize_deplibs"
-                    else
-                      deplibs="$deplib $deplibs"
-                      test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
-                    fi
-                    continue
-                  fi
-                fi
-                ;;
-              *) ;;
-              esac
-            fi
-          fi
-          ;; # -l
-        *.ltframework)
-          if test "$linkmode,$pass" = "prog,link"; then
-            compile_deplibs="$deplib $compile_deplibs"
-            finalize_deplibs="$deplib $finalize_deplibs"
-          else
-            deplibs="$deplib $deplibs"
-            if test "$linkmode" = lib ; then
-                case "$new_inherited_linker_flags " in
-                    *" $deplib "*) ;;
-                    * ) new_inherited_linker_flags="$new_inherited_linker_flags $deplib" ;;
-                esac
-            fi
-          fi
-          continue
-          ;;
-        -L*)
-          case $linkmode in
-          lib)
-            deplibs="$deplib $deplibs"
-            test "$pass" = conv && continue
-            newdependency_libs="$deplib $newdependency_libs"
-            func_stripname '-L' '' "$deplib"
-            newlib_search_path="$newlib_search_path $func_stripname_result"
-            ;;
-          prog)
-            if test "$pass" = conv; then
-              deplibs="$deplib $deplibs"
-              continue
-            fi
-            if test "$pass" = scan; then
-              deplibs="$deplib $deplibs"
-            else
-              compile_deplibs="$deplib $compile_deplibs"
-              finalize_deplibs="$deplib $finalize_deplibs"
-            fi
-            func_stripname '-L' '' "$deplib"
-            newlib_search_path="$newlib_search_path $func_stripname_result"
-            ;;
-          *)
-            func_warning "\`-L' is ignored for archives/objects"
-            ;;
-          esac # linkmode
-          continue
-          ;; # -L
-        -R*)
-          if test "$pass" = link; then
-            func_stripname '-R' '' "$deplib"
-            dir=$func_stripname_result
-            # Make sure the xrpath contains only unique directories.
-            case "$xrpath " in
-            *" $dir "*) ;;
-            *) xrpath="$xrpath $dir" ;;
-            esac
-          fi
-          deplibs="$deplib $deplibs"
-          continue
-          ;;
-        *.la) lib="$deplib" ;;
-        *.$libext)
-          if test "$pass" = conv; then
-            deplibs="$deplib $deplibs"
-            continue
-          fi
-          case $linkmode in
-          lib)
-            # Linking convenience modules into shared libraries is allowed,
-            # but linking other static libraries is non-portable.
-            case " $dlpreconveniencelibs " in
-            *" $deplib "*) ;;
-            *)
-              valid_a_lib=no
-              case $deplibs_check_method in
-                match_pattern*)
-                  set dummy $deplibs_check_method; shift
-                  match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
-                  if eval "\$ECHO \"X$deplib\"" 2>/dev/null | $Xsed -e 10q \
-                    | $EGREP "$match_pattern_regex" > /dev/null; then
-                    valid_a_lib=yes
-                  fi
-                ;;
-                pass_all)
-                  valid_a_lib=yes
-                ;;
-              esac
-              if test "$valid_a_lib" != yes; then
-                $ECHO
-                $ECHO "*** Warning: Trying to link with static lib archive $deplib."
-                $ECHO "*** I have the capability to make that library automatically link in when"
-                $ECHO "*** you link to this library.  But I can only do this if you have a"
-                $ECHO "*** shared version of the library, which you do not appear to have"
-                $ECHO "*** because the file extensions .$libext of this argument makes me believe"
-                $ECHO "*** that it is just a static archive that I should not use here."
-              else
-                $ECHO
-                $ECHO "*** Warning: Linking the shared library $output against the"
-                $ECHO "*** static library $deplib is not portable!"
-                deplibs="$deplib $deplibs"
-              fi
-              ;;
-            esac
-            continue
-            ;;
-          prog)
-            if test "$pass" != link; then
-              deplibs="$deplib $deplibs"
-            else
-              compile_deplibs="$deplib $compile_deplibs"
-              finalize_deplibs="$deplib $finalize_deplibs"
-            fi
-            continue
-            ;;
-          esac # linkmode
-          ;; # *.$libext
-        *.lo | *.$objext)
-          if test "$pass" = conv; then
-            deplibs="$deplib $deplibs"
-          elif test "$linkmode" = prog; then
-            if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
-              # If there is no dlopen support or we're linking statically,
-              # we need to preload.
-              newdlprefiles="$newdlprefiles $deplib"
-              compile_deplibs="$deplib $compile_deplibs"
-              finalize_deplibs="$deplib $finalize_deplibs"
-            else
-              newdlfiles="$newdlfiles $deplib"
-            fi
-          fi
-          continue
-          ;;
-        %DEPLIBS%)
-          alldeplibs=yes
-          continue
-          ;;
-        esac # case $deplib
-
-        if test "$found" = yes || test -f "$lib"; then :
-        else
-          func_fatal_error "cannot find the library \`$lib' or unhandled argument \`$deplib'"
-        fi
-
-        # Check to see that this really is a libtool archive.
-        func_lalib_unsafe_p "$lib" \
-          || func_fatal_error "\`$lib' is not a valid libtool archive"
-
-        func_dirname "$lib" "" "."
-        ladir="$func_dirname_result"
-
-        dlname=
-        dlopen=
-        dlpreopen=
-        libdir=
-        library_names=
-        old_library=
-        inherited_linker_flags=
-        # If the library was installed with an old release of libtool,
-        # it will not redefine variables installed, or shouldnotlink
-        installed=yes
-        shouldnotlink=no
-        avoidtemprpath=
-
-
-        # Read the .la file
-        func_source "$lib"
-
-        # Convert "-framework foo" to "foo.ltframework"
-        if test -n "$inherited_linker_flags"; then
-          tmp_inherited_linker_flags=`$ECHO "X$inherited_linker_flags" | $Xsed -e 's/-framework \([^ $]*\)/\1.ltframework/g'`
-          for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do
-            case " $new_inherited_linker_flags " in
-              *" $tmp_inherited_linker_flag "*) ;;
-              *) new_inherited_linker_flags="$new_inherited_linker_flags $tmp_inherited_linker_flag";;
-            esac
-          done
-        fi
-        dependency_libs=`$ECHO "X $dependency_libs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
-        if test "$linkmode,$pass" = "lib,link" ||
-           test "$linkmode,$pass" = "prog,scan" ||
-           { test "$linkmode" != prog && test "$linkmode" != lib; }; then
-          test -n "$dlopen" && dlfiles="$dlfiles $dlopen"
-          test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen"
-        fi
-
-        if test "$pass" = conv; then
-          # Only check for convenience libraries
-          deplibs="$lib $deplibs"
-          if test -z "$libdir"; then
-            if test -z "$old_library"; then
-              func_fatal_error "cannot find name of link library for \`$lib'"
-            fi
-            # It is a libtool convenience library, so add in its objects.
-            convenience="$convenience $ladir/$objdir/$old_library"
-            old_convenience="$old_convenience $ladir/$objdir/$old_library"
-            tmp_libs=
-            for deplib in $dependency_libs; do
-              deplibs="$deplib $deplibs"
-              if $opt_duplicate_deps ; then
-                case "$tmp_libs " in
-                *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
-                esac
-              fi
-              tmp_libs="$tmp_libs $deplib"
-            done
-          elif test "$linkmode" != prog && test "$linkmode" != lib; then
-            func_fatal_error "\`$lib' is not a convenience library"
-          fi
-          continue
-        fi # $pass = conv
-
-
-        # Get the name of the library we link against.
-        linklib=
-        for l in $old_library $library_names; do
-          linklib="$l"
-        done
-        if test -z "$linklib"; then
-          func_fatal_error "cannot find name of link library for \`$lib'"
-        fi
-
-        # This library was specified with -dlopen.
-        if test "$pass" = dlopen; then
-          if test -z "$libdir"; then
-            func_fatal_error "cannot -dlopen a convenience library: \`$lib'"
-          fi
-          if test -z "$dlname" ||
-             test "$dlopen_support" != yes ||
-             test "$build_libtool_libs" = no; then
-            # If there is no dlname, no dlopen support or we're linking
-            # statically, we need to preload.  We also need to preload any
-            # dependent libraries so libltdl's deplib preloader doesn't
-            # bomb out in the load deplibs phase.
-            dlprefiles="$dlprefiles $lib $dependency_libs"
-          else
-            newdlfiles="$newdlfiles $lib"
-          fi
-          continue
-        fi # $pass = dlopen
-
-        # We need an absolute path.
-        case $ladir in
-        [\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;;
-        *)
-          abs_ladir=`cd "$ladir" && pwd`
-          if test -z "$abs_ladir"; then
-            func_warning "cannot determine absolute directory name of \`$ladir'"
-            func_warning "passing it literally to the linker, although it might fail"
-            abs_ladir="$ladir"
-          fi
-          ;;
-        esac
-        func_basename "$lib"
-        laname="$func_basename_result"
-
-        # Find the relevant object directory and library name.
-        if test "X$installed" = Xyes; then
-          if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then
-            func_warning "library \`$lib' was moved."
-            dir="$ladir"
-            absdir="$abs_ladir"
-            libdir="$abs_ladir"
-          else
-            dir="$libdir"
-            absdir="$libdir"
-          fi
-          test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes
-        else
-          if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then
-            dir="$ladir"
-            absdir="$abs_ladir"
-            # Remove this search path later
-            notinst_path="$notinst_path $abs_ladir"
-          else
-            dir="$ladir/$objdir"
-            absdir="$abs_ladir/$objdir"
-            # Remove this search path later
-            notinst_path="$notinst_path $abs_ladir"
-          fi
-        fi # $installed = yes
-        func_stripname 'lib' '.la' "$laname"
-        name=$func_stripname_result
-
-        # This library was specified with -dlpreopen.
-        if test "$pass" = dlpreopen; then
-          if test -z "$libdir" && test "$linkmode" = prog; then
-            func_fatal_error "only libraries may -dlpreopen a convenience library: \`$lib'"
-          fi
-          # Prefer using a static library (so that no silly _DYNAMIC symbols
-          # are required to link).
-          if test -n "$old_library"; then
-            newdlprefiles="$newdlprefiles $dir/$old_library"
-            # Keep a list of preopened convenience libraries to check
-            # that they are being used correctly in the link pass.
-            test -z "$libdir" && \
-                dlpreconveniencelibs="$dlpreconveniencelibs $dir/$old_library"
-          # Otherwise, use the dlname, so that lt_dlopen finds it.
-          elif test -n "$dlname"; then
-            newdlprefiles="$newdlprefiles $dir/$dlname"
-          else
-            newdlprefiles="$newdlprefiles $dir/$linklib"
-          fi
-        fi # $pass = dlpreopen
-
-        if test -z "$libdir"; then
-          # Link the convenience library
-          if test "$linkmode" = lib; then
-            deplibs="$dir/$old_library $deplibs"
-          elif test "$linkmode,$pass" = "prog,link"; then
-            compile_deplibs="$dir/$old_library $compile_deplibs"
-            finalize_deplibs="$dir/$old_library $finalize_deplibs"
-          else
-            deplibs="$lib $deplibs" # used for prog,scan pass
-          fi
-          continue
-        fi
-
-
-        if test "$linkmode" = prog && test "$pass" != link; then
-          newlib_search_path="$newlib_search_path $ladir"
-          deplibs="$lib $deplibs"
-
-          linkalldeplibs=no
-          if test "$link_all_deplibs" != no || test -z "$library_names" ||
-             test "$build_libtool_libs" = no; then
-            linkalldeplibs=yes
-          fi
-
-          tmp_libs=
-          for deplib in $dependency_libs; do
-            case $deplib in
-            -L*) func_stripname '-L' '' "$deplib"
-                 newlib_search_path="$newlib_search_path $func_stripname_result"
-                 ;;
-            esac
-            # Need to link against all dependency_libs?
-            if test "$linkalldeplibs" = yes; then
-              deplibs="$deplib $deplibs"
-            else
-              # Need to hardcode shared library paths
-              # or/and link against static libraries
-              newdependency_libs="$deplib $newdependency_libs"
-            fi
-            if $opt_duplicate_deps ; then
-              case "$tmp_libs " in
-              *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
-              esac
-            fi
-            tmp_libs="$tmp_libs $deplib"
-          done # for deplib
-          continue
-        fi # $linkmode = prog...
-
-        if test "$linkmode,$pass" = "prog,link"; then
-          if test -n "$library_names" &&
-             { { test "$prefer_static_libs" = no ||
-                 test "$prefer_static_libs,$installed" = "built,yes"; } ||
-               test -z "$old_library"; }; then
-            # We need to hardcode the library path
-            if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then
-              # Make sure the rpath contains only unique directories.
-              case "$temp_rpath:" in
-              *"$absdir:"*) ;;
-              *) temp_rpath="$temp_rpath$absdir:" ;;
-              esac
-            fi
-
-            # Hardcode the library path.
-            # Skip directories that are in the system default run-time
-            # search path.
-            case " $sys_lib_dlsearch_path " in
-            *" $absdir "*) ;;
-            *)
-              case "$compile_rpath " in
-              *" $absdir "*) ;;
-              *) compile_rpath="$compile_rpath $absdir"
-              esac
-              ;;
-            esac
-            case " $sys_lib_dlsearch_path " in
-            *" $libdir "*) ;;
-            *)
-              case "$finalize_rpath " in
-              *" $libdir "*) ;;
-              *) finalize_rpath="$finalize_rpath $libdir"
-              esac
-              ;;
-            esac
-          fi # $linkmode,$pass = prog,link...
-
-          if test "$alldeplibs" = yes &&
-             { test "$deplibs_check_method" = pass_all ||
-               { test "$build_libtool_libs" = yes &&
-                 test -n "$library_names"; }; }; then
-            # We only need to search for static libraries
-            continue
-          fi
-        fi
-
-        link_static=no # Whether the deplib will be linked statically
-        use_static_libs=$prefer_static_libs
-        if test "$use_static_libs" = built && test "$installed" = yes; then
-          use_static_libs=no
-        fi
-        if test -n "$library_names" &&
-           { test "$use_static_libs" = no || test -z "$old_library"; }; then
-          case $host in
-          *cygwin* | *mingw* | *cegcc*)
-              # No point in relinking DLLs because paths are not encoded
-              notinst_deplibs="$notinst_deplibs $lib"
-              need_relink=no
-            ;;
-          *)
-            if test "$installed" = no; then
-              notinst_deplibs="$notinst_deplibs $lib"
-              need_relink=yes
-            fi
-            ;;
-          esac
-          # This is a shared library
-
-          # Warn about portability, can't link against -module's on some
-          # systems (darwin).  Don't bleat about dlopened modules though!
-          dlopenmodule=""
-          for dlpremoduletest in $dlprefiles; do
-            if test "X$dlpremoduletest" = "X$lib"; then
-              dlopenmodule="$dlpremoduletest"
-              break
-            fi
-          done
-          if test -z "$dlopenmodule" && test "$shouldnotlink" = yes && test "$pass" = link; then
-            $ECHO
-            if test "$linkmode" = prog; then
-              $ECHO "*** Warning: Linking the executable $output against the loadable module"
-            else
-              $ECHO "*** Warning: Linking the shared library $output against the loadable module"
-            fi
-            $ECHO "*** $linklib is not portable!"
-          fi
-          if test "$linkmode" = lib &&
-             test "$hardcode_into_libs" = yes; then
-            # Hardcode the library path.
-            # Skip directories that are in the system default run-time
-            # search path.
-            case " $sys_lib_dlsearch_path " in
-            *" $absdir "*) ;;
-            *)
-              case "$compile_rpath " in
-              *" $absdir "*) ;;
-              *) compile_rpath="$compile_rpath $absdir"
-              esac
-              ;;
-            esac
-            case " $sys_lib_dlsearch_path " in
-            *" $libdir "*) ;;
-            *)
-              case "$finalize_rpath " in
-              *" $libdir "*) ;;
-              *) finalize_rpath="$finalize_rpath $libdir"
-              esac
-              ;;
-            esac
-          fi
-
-          if test -n "$old_archive_from_expsyms_cmds"; then
-            # figure out the soname
-            set dummy $library_names
-            shift
-            realname="$1"
-            shift
-            libname=`eval "\\$ECHO \"$libname_spec\""`
-            # use dlname if we got it. it's perfectly good, no?
-            if test -n "$dlname"; then
-              soname="$dlname"
-            elif test -n "$soname_spec"; then
-              # bleh windows
-              case $host in
-              *cygwin* | mingw* | *cegcc*)
-                func_arith $current - $age
-                major=$func_arith_result
-                versuffix="-$major"
-                ;;
-              esac
-              eval soname=\"$soname_spec\"
-            else
-              soname="$realname"
-            fi
-
-            # Make a new name for the extract_expsyms_cmds to use
-            soroot="$soname"
-            func_basename "$soroot"
-            soname="$func_basename_result"
-            func_stripname 'lib' '.dll' "$soname"
-            newlib=libimp-$func_stripname_result.a
-
-            # If the library has no export list, then create one now
-            if test -f "$output_objdir/$soname-def"; then :
-            else
-              func_verbose "extracting exported symbol list from \`$soname'"
-              func_execute_cmds "$extract_expsyms_cmds" 'exit $?'
-            fi
-
-            # Create $newlib
-            if test -f "$output_objdir/$newlib"; then :; else
-              func_verbose "generating import library for \`$soname'"
-              func_execute_cmds "$old_archive_from_expsyms_cmds" 'exit $?'
-            fi
-            # make sure the library variables are pointing to the new library
-            dir=$output_objdir
-            linklib=$newlib
-          fi # test -n "$old_archive_from_expsyms_cmds"
-
-          if test "$linkmode" = prog || test "$mode" != relink; then
-            add_shlibpath=
-            add_dir=
-            add=
-            lib_linked=yes
-            case $hardcode_action in
-            immediate | unsupported)
-              if test "$hardcode_direct" = no; then
-                add="$dir/$linklib"
-                case $host in
-                  *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;;
-                  *-*-sysv4*uw2*) add_dir="-L$dir" ;;
-                  *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \
-                    *-*-unixware7*) add_dir="-L$dir" ;;
-                  *-*-darwin* )
-                    # if the lib is a (non-dlopened) module then we can not
-                    # link against it, someone is ignoring the earlier warnings
-                    if /usr/bin/file -L $add 2> /dev/null |
-                         $GREP ": [^:]* bundle" >/dev/null ; then
-                      if test "X$dlopenmodule" != "X$lib"; then
-                        $ECHO "*** Warning: lib $linklib is a module, not a shared library"
-                        if test -z "$old_library" ; then
-                          $ECHO
-                          $ECHO "*** And there doesn't seem to be a static archive available"
-                          $ECHO "*** The link will probably fail, sorry"
-                        else
-                          add="$dir/$old_library"
-                        fi
-                      elif test -n "$old_library"; then
-                        add="$dir/$old_library"
-                      fi
-                    fi
-                esac
-              elif test "$hardcode_minus_L" = no; then
-                case $host in
-                *-*-sunos*) add_shlibpath="$dir" ;;
-                esac
-                add_dir="-L$dir"
-                add="-l$name"
-              elif test "$hardcode_shlibpath_var" = no; then
-                add_shlibpath="$dir"
-                add="-l$name"
-              else
-                lib_linked=no
-              fi
-              ;;
-            relink)
-              if test "$hardcode_direct" = yes &&
-                 test "$hardcode_direct_absolute" = no; then
-                add="$dir/$linklib"
-              elif test "$hardcode_minus_L" = yes; then
-                add_dir="-L$dir"
-                # Try looking first in the location we're being installed to.
-                if test -n "$inst_prefix_dir"; then
-                  case $libdir in
-                    [\\/]*)
-                      add_dir="$add_dir -L$inst_prefix_dir$libdir"
-                      ;;
-                  esac
-                fi
-                add="-l$name"
-              elif test "$hardcode_shlibpath_var" = yes; then
-                add_shlibpath="$dir"
-                add="-l$name"
-              else
-                lib_linked=no
-              fi
-              ;;
-            *) lib_linked=no ;;
-            esac
-
-            if test "$lib_linked" != yes; then
-              func_fatal_configuration "unsupported hardcode properties"
-            fi
-
-            if test -n "$add_shlibpath"; then
-              case :$compile_shlibpath: in
-              *":$add_shlibpath:"*) ;;
-              *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;;
-              esac
-            fi
-            if test "$linkmode" = prog; then
-              test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs"
-              test -n "$add" && compile_deplibs="$add $compile_deplibs"
-            else
-              test -n "$add_dir" && deplibs="$add_dir $deplibs"
-              test -n "$add" && deplibs="$add $deplibs"
-              if test "$hardcode_direct" != yes &&
-                 test "$hardcode_minus_L" != yes &&
-                 test "$hardcode_shlibpath_var" = yes; then
-                case :$finalize_shlibpath: in
-                *":$libdir:"*) ;;
-                *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
-                esac
-              fi
-            fi
-          fi
-
-          if test "$linkmode" = prog || test "$mode" = relink; then
-            add_shlibpath=
-            add_dir=
-            add=
-            # Finalize command for both is simple: just hardcode it.
-            if test "$hardcode_direct" = yes &&
-               test "$hardcode_direct_absolute" = no; then
-              add="$libdir/$linklib"
-            elif test "$hardcode_minus_L" = yes; then
-              add_dir="-L$libdir"
-              add="-l$name"
-            elif test "$hardcode_shlibpath_var" = yes; then
-              case :$finalize_shlibpath: in
-              *":$libdir:"*) ;;
-              *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
-              esac
-              add="-l$name"
-            elif test "$hardcode_automatic" = yes; then
-              if test -n "$inst_prefix_dir" &&
-                 test -f "$inst_prefix_dir$libdir/$linklib" ; then
-                add="$inst_prefix_dir$libdir/$linklib"
-              else
-                add="$libdir/$linklib"
-              fi
-            else
-              # We cannot seem to hardcode it, guess we'll fake it.
-              add_dir="-L$libdir"
-              # Try looking first in the location we're being installed to.
-              if test -n "$inst_prefix_dir"; then
-                case $libdir in
-                  [\\/]*)
-                    add_dir="$add_dir -L$inst_prefix_dir$libdir"
-                    ;;
-                esac
-              fi
-              add="-l$name"
-            fi
-
-            if test "$linkmode" = prog; then
-              test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs"
-              test -n "$add" && finalize_deplibs="$add $finalize_deplibs"
-            else
-              test -n "$add_dir" && deplibs="$add_dir $deplibs"
-              test -n "$add" && deplibs="$add $deplibs"
-            fi
-          fi
-        elif test "$linkmode" = prog; then
-          # Here we assume that one of hardcode_direct or hardcode_minus_L
-          # is not unsupported.  This is valid on all known static and
-          # shared platforms.
-          if test "$hardcode_direct" != unsupported; then
-            test -n "$old_library" && linklib="$old_library"
-            compile_deplibs="$dir/$linklib $compile_deplibs"
-            finalize_deplibs="$dir/$linklib $finalize_deplibs"
-          else
-            compile_deplibs="-l$name -L$dir $compile_deplibs"
-            finalize_deplibs="-l$name -L$dir $finalize_deplibs"
-          fi
-        elif test "$build_libtool_libs" = yes; then
-          # Not a shared library
-          if test "$deplibs_check_method" != pass_all; then
-            # We're trying link a shared library against a static one
-            # but the system doesn't support it.
-
-            # Just print a warning and add the library to dependency_libs so
-            # that the program can be linked against the static library.
-            $ECHO
-            $ECHO "*** Warning: This system can not link to static lib archive $lib."
-            $ECHO "*** I have the capability to make that library automatically link in when"
-            $ECHO "*** you link to this library.  But I can only do this if you have a"
-            $ECHO "*** shared version of the library, which you do not appear to have."
-            if test "$module" = yes; then
-              $ECHO "*** But as you try to build a module library, libtool will still create "
-              $ECHO "*** a static module, that should work as long as the dlopening application"
-              $ECHO "*** is linked with the -dlopen flag to resolve symbols at runtime."
-              if test -z "$global_symbol_pipe"; then
-                $ECHO
-                $ECHO "*** However, this would only work if libtool was able to extract symbol"
-                $ECHO "*** lists from a program, using \`nm' or equivalent, but libtool could"
-                $ECHO "*** not find such a program.  So, this module is probably useless."
-                $ECHO "*** \`nm' from GNU binutils and a full rebuild may help."
-              fi
-              if test "$build_old_libs" = no; then
-                build_libtool_libs=module
-                build_old_libs=yes
-              else
-                build_libtool_libs=no
-              fi
-            fi
-          else
-            deplibs="$dir/$old_library $deplibs"
-            link_static=yes
-          fi
-        fi # link shared/static library?
-
-        if test "$linkmode" = lib; then
-          if test -n "$dependency_libs" &&
-             { test "$hardcode_into_libs" != yes ||
-               test "$build_old_libs" = yes ||
-               test "$link_static" = yes; }; then
-            # Extract -R from dependency_libs
-            temp_deplibs=
-            for libdir in $dependency_libs; do
-              case $libdir in
-              -R*) func_stripname '-R' '' "$libdir"
-                   temp_xrpath=$func_stripname_result
-                   case " $xrpath " in
-                   *" $temp_xrpath "*) ;;
-                   *) xrpath="$xrpath $temp_xrpath";;
-                   esac;;
-              *) temp_deplibs="$temp_deplibs $libdir";;
-              esac
-            done
-            dependency_libs="$temp_deplibs"
-          fi
-
-          newlib_search_path="$newlib_search_path $absdir"
-          # Link against this library
-          test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs"
-          # ... and its dependency_libs
-          tmp_libs=
-          for deplib in $dependency_libs; do
-            newdependency_libs="$deplib $newdependency_libs"
-            if $opt_duplicate_deps ; then
-              case "$tmp_libs " in
-              *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
-              esac
-            fi
-            tmp_libs="$tmp_libs $deplib"
-          done
-
-          if test "$link_all_deplibs" != no; then
-            # Add the search paths of all dependency libraries
-            for deplib in $dependency_libs; do
-              path=
-              case $deplib in
-              -L*) path="$deplib" ;;
-              *.la)
-                func_dirname "$deplib" "" "."
-                dir="$func_dirname_result"
-                # We need an absolute path.
-                case $dir in
-                [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;;
-                *)
-                  absdir=`cd "$dir" && pwd`
-                  if test -z "$absdir"; then
-                    func_warning "cannot determine absolute directory name of \`$dir'"
-                    absdir="$dir"
-                  fi
-                  ;;
-                esac
-                if $GREP "^installed=no" $deplib > /dev/null; then
-                case $host in
-                *-*-darwin*)
-                  depdepl=
-                  eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib`
-                  if test -n "$deplibrary_names" ; then
-                    for tmp in $deplibrary_names ; do
-                      depdepl=$tmp
-                    done
-                    if test -f "$absdir/$objdir/$depdepl" ; then
-                      depdepl="$absdir/$objdir/$depdepl"
-                      darwin_install_name=`${OTOOL} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'`
-                      if test -z "$darwin_install_name"; then
-                          darwin_install_name=`${OTOOL64} -L $depdepl  | awk '{if (NR == 2) {print $1;exit}}'`
-                      fi
-                      compiler_flags="$compiler_flags ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}"
-                      linker_flags="$linker_flags -dylib_file ${darwin_install_name}:${depdepl}"
-                      path=
-                    fi
-                  fi
-                  ;;
-                *)
-                  path="-L$absdir/$objdir"
-                  ;;
-                esac
-                else
-                  eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
-                  test -z "$libdir" && \
-                    func_fatal_error "\`$deplib' is not a valid libtool archive"
-                  test "$absdir" != "$libdir" && \
-                    func_warning "\`$deplib' seems to be moved"
-
-                  path="-L$absdir"
-                fi
-                ;;
-              esac
-              case " $deplibs " in
-              *" $path "*) ;;
-              *) deplibs="$path $deplibs" ;;
-              esac
-            done
-          fi # link_all_deplibs != no
-        fi # linkmode = lib
-      done # for deplib in $libs
-      if test "$pass" = link; then
-        if test "$linkmode" = "prog"; then
-          compile_deplibs="$new_inherited_linker_flags $compile_deplibs"
-          finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs"
-        else
-          compiler_flags="$compiler_flags "`$ECHO "X $new_inherited_linker_flags" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
-        fi
-      fi
-      dependency_libs="$newdependency_libs"
-      if test "$pass" = dlpreopen; then
-        # Link the dlpreopened libraries before other libraries
-        for deplib in $save_deplibs; do
-          deplibs="$deplib $deplibs"
-        done
-      fi
-      if test "$pass" != dlopen; then
-        if test "$pass" != conv; then
-          # Make sure lib_search_path contains only unique directories.
-          lib_search_path=
-          for dir in $newlib_search_path; do
-            case "$lib_search_path " in
-            *" $dir "*) ;;
-            *) lib_search_path="$lib_search_path $dir" ;;
-            esac
-          done
-          newlib_search_path=
-        fi
-
-        if test "$linkmode,$pass" != "prog,link"; then
-          vars="deplibs"
-        else
-          vars="compile_deplibs finalize_deplibs"
-        fi
-        for var in $vars dependency_libs; do
-          # Add libraries to $var in reverse order
-          eval tmp_libs=\"\$$var\"
-          new_libs=
-          for deplib in $tmp_libs; do
-            # FIXME: Pedantically, this is the right thing to do, so
-            #        that some nasty dependency loop isn't accidentally
-            #        broken:
-            #new_libs="$deplib $new_libs"
-            # Pragmatically, this seems to cause very few problems in
-            # practice:
-            case $deplib in
-            -L*) new_libs="$deplib $new_libs" ;;
-            -R*) ;;
-            *)
-              # And here is the reason: when a library appears more
-              # than once as an explicit dependence of a library, or
-              # is implicitly linked in more than once by the
-              # compiler, it is considered special, and multiple
-              # occurrences thereof are not removed.  Compare this
-              # with having the same library being listed as a
-              # dependency of multiple other libraries: in this case,
-              # we know (pedantically, we assume) the library does not
-              # need to be listed more than once, so we keep only the
-              # last copy.  This is not always right, but it is rare
-              # enough that we require users that really mean to play
-              # such unportable linking tricks to link the library
-              # using -Wl,-lname, so that libtool does not consider it
-              # for duplicate removal.
-              case " $specialdeplibs " in
-              *" $deplib "*) new_libs="$deplib $new_libs" ;;
-              *)
-                case " $new_libs " in
-                *" $deplib "*) ;;
-                *) new_libs="$deplib $new_libs" ;;
-                esac
-                ;;
-              esac
-              ;;
-            esac
-          done
-          tmp_libs=
-          for deplib in $new_libs; do
-            case $deplib in
-            -L*)
-              case " $tmp_libs " in
-              *" $deplib "*) ;;
-              *) tmp_libs="$tmp_libs $deplib" ;;
-              esac
-              ;;
-            *) tmp_libs="$tmp_libs $deplib" ;;
-            esac
-          done
-          eval $var=\"$tmp_libs\"
-        done # for var
-      fi
-      # Last step: remove runtime libs from dependency_libs
-      # (they stay in deplibs)
-      tmp_libs=
-      for i in $dependency_libs ; do
-        case " $predeps $postdeps $compiler_lib_search_path " in
-        *" $i "*)
-          i=""
-          ;;
-        esac
-        if test -n "$i" ; then
-          tmp_libs="$tmp_libs $i"
-        fi
-      done
-      dependency_libs=$tmp_libs
-    done # for pass
-    if test "$linkmode" = prog; then
-      dlfiles="$newdlfiles"
-    fi
-    if test "$linkmode" = prog || test "$linkmode" = lib; then
-      dlprefiles="$newdlprefiles"
-    fi
-
-    case $linkmode in
-    oldlib)
-      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
-        func_warning "\`-dlopen' is ignored for archives"
-      fi
-
-      case " $deplibs" in
-      *\ -l* | *\ -L*)
-        func_warning "\`-l' and \`-L' are ignored for archives" ;;
-      esac
-
-      test -n "$rpath" && \
-        func_warning "\`-rpath' is ignored for archives"
-
-      test -n "$xrpath" && \
-        func_warning "\`-R' is ignored for archives"
-
-      test -n "$vinfo" && \
-        func_warning "\`-version-info/-version-number' is ignored for archives"
-
-      test -n "$release" && \
-        func_warning "\`-release' is ignored for archives"
-
-      test -n "$export_symbols$export_symbols_regex" && \
-        func_warning "\`-export-symbols' is ignored for archives"
-
-      # Now set the variables for building old libraries.
-      build_libtool_libs=no
-      oldlibs="$output"
-      objs="$objs$old_deplibs"
-      ;;
-
-    lib)
-      # Make sure we only generate libraries of the form `libNAME.la'.
-      case $outputname in
-      lib*)
-        func_stripname 'lib' '.la' "$outputname"
-        name=$func_stripname_result
-        eval shared_ext=\"$shrext_cmds\"
-        eval libname=\"$libname_spec\"
-        ;;
-      *)
-        test "$module" = no && \
-          func_fatal_help "libtool library \`$output' must begin with \`lib'"
-
-        if test "$need_lib_prefix" != no; then
-          # Add the "lib" prefix for modules if required
-          func_stripname '' '.la' "$outputname"
-          name=$func_stripname_result
-          eval shared_ext=\"$shrext_cmds\"
-          eval libname=\"$libname_spec\"
-        else
-          func_stripname '' '.la' "$outputname"
-          libname=$func_stripname_result
-        fi
-        ;;
-      esac
-
-      if test -n "$objs"; then
-        if test "$deplibs_check_method" != pass_all; then
-          func_fatal_error "cannot build libtool library \`$output' from non-libtool objects on this host:$objs"
-        else
-          $ECHO
-          $ECHO "*** Warning: Linking the shared library $output against the non-libtool"
-          $ECHO "*** objects $objs is not portable!"
-          libobjs="$libobjs $objs"
-        fi
-      fi
-
-      test "$dlself" != no && \
-        func_warning "\`-dlopen self' is ignored for libtool libraries"
-
-      set dummy $rpath
-      shift
-      test "$#" -gt 1 && \
-        func_warning "ignoring multiple \`-rpath's for a libtool library"
-
-      install_libdir="$1"
-
-      oldlibs=
-      if test -z "$rpath"; then
-        if test "$build_libtool_libs" = yes; then
-          # Building a libtool convenience library.
-          # Some compilers have problems with a `.al' extension so
-          # convenience libraries should have the same extension an
-          # archive normally would.
-          oldlibs="$output_objdir/$libname.$libext $oldlibs"
-          build_libtool_libs=convenience
-          build_old_libs=yes
-        fi
-
-        test -n "$vinfo" && \
-          func_warning "\`-version-info/-version-number' is ignored for convenience libraries"
-
-        test -n "$release" && \
-          func_warning "\`-release' is ignored for convenience libraries"
-      else
-
-        # Parse the version information argument.
-        save_ifs="$IFS"; IFS=':'
-        set dummy $vinfo 0 0 0
-        shift
-        IFS="$save_ifs"
-
-        test -n "$7" && \
-          func_fatal_help "too many parameters to \`-version-info'"
-
-        # convert absolute version numbers to libtool ages
-        # this retains compatibility with .la files and attempts
-        # to make the code below a bit more comprehensible
-
-        case $vinfo_number in
-        yes)
-          number_major="$1"
-          number_minor="$2"
-          number_revision="$3"
-          #
-          # There are really only two kinds -- those that
-          # use the current revision as the major version
-          # and those that subtract age and use age as
-          # a minor version.  But, then there is irix
-          # which has an extra 1 added just for fun
-          #
-          case $version_type in
-          darwin|linux|osf|windows|none)
-            func_arith $number_major + $number_minor
-            current=$func_arith_result
-            age="$number_minor"
-            revision="$number_revision"
-            ;;
-          freebsd-aout|freebsd-elf|sunos)
-            current="$number_major"
-            revision="$number_minor"
-            age="0"
-            ;;
-          irix|nonstopux)
-            func_arith $number_major + $number_minor
-            current=$func_arith_result
-            age="$number_minor"
-            revision="$number_minor"
-            lt_irix_increment=no
-            ;;
-          *)
-            func_fatal_configuration "$modename: unknown library version type \`$version_type'"
-            ;;
-          esac
-          ;;
-        no)
-          current="$1"
-          revision="$2"
-          age="$3"
-          ;;
-        esac
-
-        # Check that each of the things are valid numbers.
-        case $current in
-        0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
-        *)
-          func_error "CURRENT \`$current' must be a nonnegative integer"
-          func_fatal_error "\`$vinfo' is not valid version information"
-          ;;
-        esac
-
-        case $revision in
-        0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
-        *)
-          func_error "REVISION \`$revision' must be a nonnegative integer"
-          func_fatal_error "\`$vinfo' is not valid version information"
-          ;;
-        esac
-
-        case $age in
-        0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
-        *)
-          func_error "AGE \`$age' must be a nonnegative integer"
-          func_fatal_error "\`$vinfo' is not valid version information"
-          ;;
-        esac
-
-        if test "$age" -gt "$current"; then
-          func_error "AGE \`$age' is greater than the current interface number \`$current'"
-          func_fatal_error "\`$vinfo' is not valid version information"
-        fi
-
-        # Calculate the version variables.
-        major=
-        versuffix=
-        verstring=
-        case $version_type in
-        none) ;;
-
-        darwin)
-          # Like Linux, but with the current version available in
-          # verstring for coding it into the library header
-          func_arith $current - $age
-          major=.$func_arith_result
-          versuffix="$major.$age.$revision"
-          # Darwin ld doesn't like 0 for these options...
-          func_arith $current + 1
-          minor_current=$func_arith_result
-          xlcverstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision"
-          verstring="-compatibility_version $minor_current -current_version $minor_current.$revision"
-          ;;
-
-        freebsd-aout)
-          major=".$current"
-          versuffix=".$current.$revision";
-          ;;
-
-        freebsd-elf)
-          major=".$current"
-          versuffix=".$current"
-          ;;
-
-        irix | nonstopux)
-          if test "X$lt_irix_increment" = "Xno"; then
-            func_arith $current - $age
-          else
-            func_arith $current - $age + 1
-          fi
-          major=$func_arith_result
-
-          case $version_type in
-            nonstopux) verstring_prefix=nonstopux ;;
-            *)         verstring_prefix=sgi ;;
-          esac
-          verstring="$verstring_prefix$major.$revision"
-
-          # Add in all the interfaces that we are compatible with.
-          loop=$revision
-          while test "$loop" -ne 0; do
-            func_arith $revision - $loop
-            iface=$func_arith_result
-            func_arith $loop - 1
-            loop=$func_arith_result
-            verstring="$verstring_prefix$major.$iface:$verstring"
-          done
-
-          # Before this point, $major must not contain `.'.
-          major=.$major
-          versuffix="$major.$revision"
-          ;;
-
-        linux)
-          func_arith $current - $age
-          major=.$func_arith_result
-          versuffix="$major.$age.$revision"
-          ;;
-
-        osf)
-          func_arith $current - $age
-          major=.$func_arith_result
-          versuffix=".$current.$age.$revision"
-          verstring="$current.$age.$revision"
-
-          # Add in all the interfaces that we are compatible with.
-          loop=$age
-          while test "$loop" -ne 0; do
-            func_arith $current - $loop
-            iface=$func_arith_result
-            func_arith $loop - 1
-            loop=$func_arith_result
-            verstring="$verstring:${iface}.0"
-          done
-
-          # Make executables depend on our current version.
-          verstring="$verstring:${current}.0"
-          ;;
-
-        qnx)
-          major=".$current"
-          versuffix=".$current"
-          ;;
-
-        sunos)
-          major=".$current"
-          versuffix=".$current.$revision"
-          ;;
-
-        windows)
-          # Use '-' rather than '.', since we only want one
-          # extension on DOS 8.3 filesystems.
-          func_arith $current - $age
-          major=$func_arith_result
-          versuffix="-$major"
-          ;;
-
-        *)
-          func_fatal_configuration "unknown library version type \`$version_type'"
-          ;;
-        esac
-
-        # Clear the version info if we defaulted, and they specified a release.
-        if test -z "$vinfo" && test -n "$release"; then
-          major=
-          case $version_type in
-          darwin)
-            # we can't check for "0.0" in archive_cmds due to quoting
-            # problems, so we reset it completely
-            verstring=
-            ;;
-          *)
-            verstring="0.0"
-            ;;
-          esac
-          if test "$need_version" = no; then
-            versuffix=
-          else
-            versuffix=".0.0"
-          fi
-        fi
-
-        # Remove version info from name if versioning should be avoided
-        if test "$avoid_version" = yes && test "$need_version" = no; then
-          major=
-          versuffix=
-          verstring=""
-        fi
-
-        # Check to see if the archive will have undefined symbols.
-        if test "$allow_undefined" = yes; then
-          if test "$allow_undefined_flag" = unsupported; then
-            func_warning "undefined symbols not allowed in $host shared libraries"
-            build_libtool_libs=no
-            build_old_libs=yes
-          fi
-        else
-          # Don't allow undefined symbols.
-          allow_undefined_flag="$no_undefined_flag"
-        fi
-
-      fi
-
-      func_generate_dlsyms "$libname" "$libname" "yes"
-      libobjs="$libobjs $symfileobj"
-      test "X$libobjs" = "X " && libobjs=
-
-      if test "$mode" != relink; then
-        # Remove our outputs, but don't remove object files since they
-        # may have been created when compiling PIC objects.
-        removelist=
-        tempremovelist=`$ECHO "$output_objdir/*"`
-        for p in $tempremovelist; do
-          case $p in
-            *.$objext | *.gcno)
-               ;;
-            $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*)
-               if test "X$precious_files_regex" != "X"; then
-                 if $ECHO "$p" | $EGREP -e "$precious_files_regex" >/dev/null 2>&1
-                 then
-                   continue
-                 fi
-               fi
-               removelist="$removelist $p"
-               ;;
-            *) ;;
-          esac
-        done
-        test -n "$removelist" && \
-          func_show_eval "${RM}r \$removelist"
-      fi
-
-      # Now set the variables for building old libraries.
-      if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then
-        oldlibs="$oldlibs $output_objdir/$libname.$libext"
-
-        # Transform .lo files to .o files.
-        oldobjs="$objs "`$ECHO "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP`
-      fi
-
-      # Eliminate all temporary directories.
-      #for path in $notinst_path; do
-      # lib_search_path=`$ECHO "X$lib_search_path " | $Xsed -e "s% $path % %g"`
-      # deplibs=`$ECHO "X$deplibs " | $Xsed -e "s% -L$path % %g"`
-      # dependency_libs=`$ECHO "X$dependency_libs " | $Xsed -e "s% -L$path % %g"`
-      #done
-
-      if test -n "$xrpath"; then
-        # If the user specified any rpath flags, then add them.
-        temp_xrpath=
-        for libdir in $xrpath; do
-          temp_xrpath="$temp_xrpath -R$libdir"
-          case "$finalize_rpath " in
-          *" $libdir "*) ;;
-          *) finalize_rpath="$finalize_rpath $libdir" ;;
-          esac
-        done
-        if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then
-          dependency_libs="$temp_xrpath $dependency_libs"
-        fi
-      fi
-
-      # Make sure dlfiles contains only unique files that won't be dlpreopened
-      old_dlfiles="$dlfiles"
-      dlfiles=
-      for lib in $old_dlfiles; do
-        case " $dlprefiles $dlfiles " in
-        *" $lib "*) ;;
-        *) dlfiles="$dlfiles $lib" ;;
-        esac
-      done
-
-      # Make sure dlprefiles contains only unique files
-      old_dlprefiles="$dlprefiles"
-      dlprefiles=
-      for lib in $old_dlprefiles; do
-        case "$dlprefiles " in
-        *" $lib "*) ;;
-        *) dlprefiles="$dlprefiles $lib" ;;
-        esac
-      done
-
-      if test "$build_libtool_libs" = yes; then
-        if test -n "$rpath"; then
-          case $host in
-          *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc*)
-            # these systems don't actually have a c library (as such)!
-            ;;
-          *-*-rhapsody* | *-*-darwin1.[012])
-            # Rhapsody C library is in the System framework
-            deplibs="$deplibs System.ltframework"
-            ;;
-          *-*-netbsd*)
-            # Don't link with libc until the a.out ld.so is fixed.
-            ;;
-          *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
-            # Do not include libc due to us having libc/libc_r.
-            ;;
-          *-*-sco3.2v5* | *-*-sco5v6*)
-            # Causes problems with __ctype
-            ;;
-          *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
-            # Compiler inserts libc in the correct place for threads to work
-            ;;
-          *)
-            # Add libc to deplibs on all other systems if necessary.
-            if test "$build_libtool_need_lc" = "yes"; then
-              deplibs="$deplibs -lc"
-            fi
-            ;;
-          esac
-        fi
-
-        # Transform deplibs into only deplibs that can be linked in shared.
-        name_save=$name
-        libname_save=$libname
-        release_save=$release
-        versuffix_save=$versuffix
-        major_save=$major
-        # I'm not sure if I'm treating the release correctly.  I think
-        # release should show up in the -l (ie -lgmp5) so we don't want to
-        # add it in twice.  Is that correct?
-        release=""
-        versuffix=""
-        major=""
-        newdeplibs=
-        droppeddeps=no
-        case $deplibs_check_method in
-        pass_all)
-          # Don't check for shared/static.  Everything works.
-          # This might be a little naive.  We might want to check
-          # whether the library exists or not.  But this is on
-          # osf3 & osf4 and I'm not really sure... Just
-          # implementing what was already the behavior.
-          newdeplibs=$deplibs
-          ;;
-        test_compile)
-          # This code stresses the "libraries are programs" paradigm to its
-          # limits. Maybe even breaks it.  We compile a program, linking it
-          # against the deplibs as a proxy for the library.  Then we can check
-          # whether they linked in statically or dynamically with ldd.
-          $opt_dry_run || $RM conftest.c
-          cat > conftest.c <<EOF
-          int main() { return 0; }
-EOF
-          $opt_dry_run || $RM conftest
-          if $LTCC $LTCFLAGS -o conftest conftest.c $deplibs; then
-            ldd_output=`ldd conftest`
-            for i in $deplibs; do
-              case $i in
-              -l*)
-                func_stripname -l '' "$i"
-                name=$func_stripname_result
-                if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
-                  case " $predeps $postdeps " in
-                  *" $i "*)
-                    newdeplibs="$newdeplibs $i"
-                    i=""
-                    ;;
-                  esac
-                fi
-                if test -n "$i" ; then
-                  libname=`eval "\\$ECHO \"$libname_spec\""`
-                  deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
-                  set dummy $deplib_matches; shift
-                  deplib_match=$1
-                  if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
-                    newdeplibs="$newdeplibs $i"
-                  else
-                    droppeddeps=yes
-                    $ECHO
-                    $ECHO "*** Warning: dynamic linker does not accept needed library $i."
-                    $ECHO "*** I have the capability to make that library automatically link in when"
-                    $ECHO "*** you link to this library.  But I can only do this if you have a"
-                    $ECHO "*** shared version of the library, which I believe you do not have"
-                    $ECHO "*** because a test_compile did reveal that the linker did not use it for"
-                    $ECHO "*** its dynamic dependency list that programs get resolved with at runtime."
-                  fi
-                fi
-                ;;
-              *)
-                newdeplibs="$newdeplibs $i"
-                ;;
-              esac
-            done
-          else
-            # Error occurred in the first compile.  Let's try to salvage
-            # the situation: Compile a separate program for each library.
-            for i in $deplibs; do
-              case $i in
-              -l*)
-                func_stripname -l '' "$i"
-                name=$func_stripname_result
-                $opt_dry_run || $RM conftest
-                if $LTCC $LTCFLAGS -o conftest conftest.c $i; then
-                  ldd_output=`ldd conftest`
-                  if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
-                    case " $predeps $postdeps " in
-                    *" $i "*)
-                      newdeplibs="$newdeplibs $i"
-                      i=""
-                      ;;
-                    esac
-                  fi
-                  if test -n "$i" ; then
-                    libname=`eval "\\$ECHO \"$libname_spec\""`
-                    deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
-                    set dummy $deplib_matches; shift
-                    deplib_match=$1
-                    if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
-                      newdeplibs="$newdeplibs $i"
-                    else
-                      droppeddeps=yes
-                      $ECHO
-                      $ECHO "*** Warning: dynamic linker does not accept needed library $i."
-                      $ECHO "*** I have the capability to make that library automatically link in when"
-                      $ECHO "*** you link to this library.  But I can only do this if you have a"
-                      $ECHO "*** shared version of the library, which you do not appear to have"
-                      $ECHO "*** because a test_compile did reveal that the linker did not use this one"
-                      $ECHO "*** as a dynamic dependency that programs can get resolved with at runtime."
-                    fi
-                  fi
-                else
-                  droppeddeps=yes
-                  $ECHO
-                  $ECHO "*** Warning!  Library $i is needed by this library but I was not able to"
-                  $ECHO "*** make it link in!  You will probably need to install it or some"
-                  $ECHO "*** library that it depends on before this library will be fully"
-                  $ECHO "*** functional.  Installing it before continuing would be even better."
-                fi
-                ;;
-              *)
-                newdeplibs="$newdeplibs $i"
-                ;;
-              esac
-            done
-          fi
-          ;;
-        file_magic*)
-          set dummy $deplibs_check_method; shift
-          file_magic_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
-          for a_deplib in $deplibs; do
-            case $a_deplib in
-            -l*)
-              func_stripname -l '' "$a_deplib"
-              name=$func_stripname_result
-              if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
-                case " $predeps $postdeps " in
-                *" $a_deplib "*)
-                  newdeplibs="$newdeplibs $a_deplib"
-                  a_deplib=""
-                  ;;
-                esac
-              fi
-              if test -n "$a_deplib" ; then
-                libname=`eval "\\$ECHO \"$libname_spec\""`
-                for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
-                  potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
-                  for potent_lib in $potential_libs; do
-                      # Follow soft links.
-                      if ls -lLd "$potent_lib" 2>/dev/null |
-                         $GREP " -> " >/dev/null; then
-                        continue
-                      fi
-                      # The statement above tries to avoid entering an
-                      # endless loop below, in case of cyclic links.
-                      # We might still enter an endless loop, since a link
-                      # loop can be closed while we follow links,
-                      # but so what?
-                      potlib="$potent_lib"
-                      while test -h "$potlib" 2>/dev/null; do
-                        potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'`
-                        case $potliblink in
-                        [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;
-                        *) potlib=`$ECHO "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";;
-                        esac
-                      done
-                      if eval $file_magic_cmd \"\$potlib\" 2>/dev/null |
-                         $SED -e 10q |
-                         $EGREP "$file_magic_regex" > /dev/null; then
-                        newdeplibs="$newdeplibs $a_deplib"
-                        a_deplib=""
-                        break 2
-                      fi
-                  done
-                done
-              fi
-              if test -n "$a_deplib" ; then
-                droppeddeps=yes
-                $ECHO
-                $ECHO "*** Warning: linker path does not have real file for library $a_deplib."
-                $ECHO "*** I have the capability to make that library automatically link in when"
-                $ECHO "*** you link to this library.  But I can only do this if you have a"
-                $ECHO "*** shared version of the library, which you do not appear to have"
-                $ECHO "*** because I did check the linker path looking for a file starting"
-                if test -z "$potlib" ; then
-                  $ECHO "*** with $libname but no candidates were found. (...for file magic test)"
-                else
-                  $ECHO "*** with $libname and none of the candidates passed a file format test"
-                  $ECHO "*** using a file magic. Last file checked: $potlib"
-                fi
-              fi
-              ;;
-            *)
-              # Add a -L argument.
-              newdeplibs="$newdeplibs $a_deplib"
-              ;;
-            esac
-          done # Gone through all deplibs.
-          ;;
-        match_pattern*)
-          set dummy $deplibs_check_method; shift
-          match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
-          for a_deplib in $deplibs; do
-            case $a_deplib in
-            -l*)
-              func_stripname -l '' "$a_deplib"
-              name=$func_stripname_result
-              if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
-                case " $predeps $postdeps " in
-                *" $a_deplib "*)
-                  newdeplibs="$newdeplibs $a_deplib"
-                  a_deplib=""
-                  ;;
-                esac
-              fi
-              if test -n "$a_deplib" ; then
-                libname=`eval "\\$ECHO \"$libname_spec\""`
-                for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
-                  potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
-                  for potent_lib in $potential_libs; do
-                    potlib="$potent_lib" # see symlink-check above in file_magic test
-                    if eval "\$ECHO \"X$potent_lib\"" 2>/dev/null | $Xsed -e 10q | \
-                       $EGREP "$match_pattern_regex" > /dev/null; then
-                      newdeplibs="$newdeplibs $a_deplib"
-                      a_deplib=""
-                      break 2
-                    fi
-                  done
-                done
-              fi
-              if test -n "$a_deplib" ; then
-                droppeddeps=yes
-                $ECHO
-                $ECHO "*** Warning: linker path does not have real file for library $a_deplib."
-                $ECHO "*** I have the capability to make that library automatically link in when"
-                $ECHO "*** you link to this library.  But I can only do this if you have a"
-                $ECHO "*** shared version of the library, which you do not appear to have"
-                $ECHO "*** because I did check the linker path looking for a file starting"
-                if test -z "$potlib" ; then
-                  $ECHO "*** with $libname but no candidates were found. (...for regex pattern test)"
-                else
-                  $ECHO "*** with $libname and none of the candidates passed a file format test"
-                  $ECHO "*** using a regex pattern. Last file checked: $potlib"
-                fi
-              fi
-              ;;
-            *)
-              # Add a -L argument.
-              newdeplibs="$newdeplibs $a_deplib"
-              ;;
-            esac
-          done # Gone through all deplibs.
-          ;;
-        none | unknown | *)
-          newdeplibs=""
-          tmp_deplibs=`$ECHO "X $deplibs" | $Xsed \
-              -e 's/ -lc$//' -e 's/ -[LR][^ ]*//g'`
-          if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
-            for i in $predeps $postdeps ; do
-              # can't use Xsed below, because $i might contain '/'
-              tmp_deplibs=`$ECHO "X $tmp_deplibs" | $Xsed -e "s,$i,,"`
-            done
-          fi
-          if $ECHO "X $tmp_deplibs" | $Xsed -e 's/[      ]//g' |
-             $GREP . >/dev/null; then
-            $ECHO
-            if test "X$deplibs_check_method" = "Xnone"; then
-              $ECHO "*** Warning: inter-library dependencies are not supported in this platform."
-            else
-              $ECHO "*** Warning: inter-library dependencies are not known to be supported."
-            fi
-            $ECHO "*** All declared inter-library dependencies are being dropped."
-            droppeddeps=yes
-          fi
-          ;;
-        esac
-        versuffix=$versuffix_save
-        major=$major_save
-        release=$release_save
-        libname=$libname_save
-        name=$name_save
-
-        case $host in
-        *-*-rhapsody* | *-*-darwin1.[012])
-          # On Rhapsody replace the C library with the System framework
-          newdeplibs=`$ECHO "X $newdeplibs" | $Xsed -e 's/ -lc / System.ltframework /'`
-          ;;
-        esac
-
-        if test "$droppeddeps" = yes; then
-          if test "$module" = yes; then
-            $ECHO
-            $ECHO "*** Warning: libtool could not satisfy all declared inter-library"
-            $ECHO "*** dependencies of module $libname.  Therefore, libtool will create"
-            $ECHO "*** a static module, that should work as long as the dlopening"
-            $ECHO "*** application is linked with the -dlopen flag."
-            if test -z "$global_symbol_pipe"; then
-              $ECHO
-              $ECHO "*** However, this would only work if libtool was able to extract symbol"
-              $ECHO "*** lists from a program, using \`nm' or equivalent, but libtool could"
-              $ECHO "*** not find such a program.  So, this module is probably useless."
-              $ECHO "*** \`nm' from GNU binutils and a full rebuild may help."
-            fi
-            if test "$build_old_libs" = no; then
-              oldlibs="$output_objdir/$libname.$libext"
-              build_libtool_libs=module
-              build_old_libs=yes
-            else
-              build_libtool_libs=no
-            fi
-          else
-            $ECHO "*** The inter-library dependencies that have been dropped here will be"
-            $ECHO "*** automatically added whenever a program is linked with this library"
-            $ECHO "*** or is declared to -dlopen it."
-
-            if test "$allow_undefined" = no; then
-              $ECHO
-              $ECHO "*** Since this library must not contain undefined symbols,"
-              $ECHO "*** because either the platform does not support them or"
-              $ECHO "*** it was explicitly requested with -no-undefined,"
-              $ECHO "*** libtool will only create a static version of it."
-              if test "$build_old_libs" = no; then
-                oldlibs="$output_objdir/$libname.$libext"
-                build_libtool_libs=module
-                build_old_libs=yes
-              else
-                build_libtool_libs=no
-              fi
-            fi
-          fi
-        fi
-        # Done checking deplibs!
-        deplibs=$newdeplibs
-      fi
-      # Time to change all our "foo.ltframework" stuff back to "-framework foo"
-      case $host in
-        *-*-darwin*)
-          newdeplibs=`$ECHO "X $newdeplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
-          new_inherited_linker_flags=`$ECHO "X $new_inherited_linker_flags" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
-          deplibs=`$ECHO "X $deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
-          ;;
-      esac
-
-      # move library search paths that coincide with paths to not yet
-      # installed libraries to the beginning of the library search list
-      new_libs=
-      for path in $notinst_path; do
-        case " $new_libs " in
-        *" -L$path/$objdir "*) ;;
-        *)
-          case " $deplibs " in
-          *" -L$path/$objdir "*)
-            new_libs="$new_libs -L$path/$objdir" ;;
-          esac
-          ;;
-        esac
-      done
-      for deplib in $deplibs; do
-        case $deplib in
-        -L*)
-          case " $new_libs " in
-          *" $deplib "*) ;;
-          *) new_libs="$new_libs $deplib" ;;
-          esac
-          ;;
-        *) new_libs="$new_libs $deplib" ;;
-        esac
-      done
-      deplibs="$new_libs"
-
-      # All the library-specific variables (install_libdir is set above).
-      library_names=
-      old_library=
-      dlname=
-
-      # Test again, we may have decided not to build it any more
-      if test "$build_libtool_libs" = yes; then
-        if test "$hardcode_into_libs" = yes; then
-          # Hardcode the library paths
-          hardcode_libdirs=
-          dep_rpath=
-          rpath="$finalize_rpath"
-          test "$mode" != relink && rpath="$compile_rpath$rpath"
-          for libdir in $rpath; do
-            if test -n "$hardcode_libdir_flag_spec"; then
-              if test -n "$hardcode_libdir_separator"; then
-                if test -z "$hardcode_libdirs"; then
-                  hardcode_libdirs="$libdir"
-                else
-                  # Just accumulate the unique libdirs.
-                  case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
-                  *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
-                    ;;
-                  *)
-                    hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
-                    ;;
-                  esac
-                fi
-              else
-                eval flag=\"$hardcode_libdir_flag_spec\"
-                dep_rpath="$dep_rpath $flag"
-              fi
-            elif test -n "$runpath_var"; then
-              case "$perm_rpath " in
-              *" $libdir "*) ;;
-              *) perm_rpath="$perm_rpath $libdir" ;;
-              esac
-            fi
-          done
-          # Substitute the hardcoded libdirs into the rpath.
-          if test -n "$hardcode_libdir_separator" &&
-             test -n "$hardcode_libdirs"; then
-            libdir="$hardcode_libdirs"
-            if test -n "$hardcode_libdir_flag_spec_ld"; then
-              eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\"
-            else
-              eval dep_rpath=\"$hardcode_libdir_flag_spec\"
-            fi
-          fi
-          if test -n "$runpath_var" && test -n "$perm_rpath"; then
-            # We should set the runpath_var.
-            rpath=
-            for dir in $perm_rpath; do
-              rpath="$rpath$dir:"
-            done
-            eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var"
-          fi
-          test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs"
-        fi
-
-        shlibpath="$finalize_shlibpath"
-        test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath"
-        if test -n "$shlibpath"; then
-          eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var"
-        fi
-
-        # Get the real and link names of the library.
-        eval shared_ext=\"$shrext_cmds\"
-        eval library_names=\"$library_names_spec\"
-        set dummy $library_names
-        shift
-        realname="$1"
-        shift
-
-        if test -n "$soname_spec"; then
-          eval soname=\"$soname_spec\"
-        else
-          soname="$realname"
-        fi
-        if test -z "$dlname"; then
-          dlname=$soname
-        fi
-
-        lib="$output_objdir/$realname"
-        linknames=
-        for link
-        do
-          linknames="$linknames $link"
-        done
-
-        # Use standard objects if they are pic
-        test -z "$pic_flag" && libobjs=`$ECHO "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
-        test "X$libobjs" = "X " && libobjs=
-
-        delfiles=
-        if test -n "$export_symbols" && test -n "$include_expsyms"; then
-          $opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp"
-          export_symbols="$output_objdir/$libname.uexp"
-          delfiles="$delfiles $export_symbols"
-        fi
-
-        orig_export_symbols=
-        case $host_os in
-        cygwin* | mingw* | cegcc*)
-          if test -n "$export_symbols" && test -z "$export_symbols_regex"; then
-            # exporting using user supplied symfile
-            if test "x`$SED 1q $export_symbols`" != xEXPORTS; then
-              # and it's NOT already a .def file. Must figure out
-              # which of the given symbols are data symbols and tag
-              # them as such. So, trigger use of export_symbols_cmds.
-              # export_symbols gets reassigned inside the "prepare
-              # the list of exported symbols" if statement, so the
-              # include_expsyms logic still works.
-              orig_export_symbols="$export_symbols"
-              export_symbols=
-              always_export_symbols=yes
-            fi
-          fi
-          ;;
-        esac
-
-        # Prepare the list of exported symbols
-        if test -z "$export_symbols"; then
-          if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then
-            func_verbose "generating symbol list for \`$libname.la'"
-            export_symbols="$output_objdir/$libname.exp"
-            $opt_dry_run || $RM $export_symbols
-            cmds=$export_symbols_cmds
-            save_ifs="$IFS"; IFS='~'
-            for cmd in $cmds; do
-              IFS="$save_ifs"
-              eval cmd=\"$cmd\"
-              func_len " $cmd"
-              len=$func_len_result
-              if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
-                func_show_eval "$cmd" 'exit $?'
-                skipped_export=false
-              else
-                # The command line is too long to execute in one step.
-                func_verbose "using reloadable object file for export list..."
-                skipped_export=:
-                # Break out early, otherwise skipped_export may be
-                # set to false by a later but shorter cmd.
-                break
-              fi
-            done
-            IFS="$save_ifs"
-            if test -n "$export_symbols_regex" && test "X$skipped_export" != "X:"; then
-              func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
-              func_show_eval '$MV "${export_symbols}T" "$export_symbols"'
-            fi
-          fi
-        fi
-
-        if test -n "$export_symbols" && test -n "$include_expsyms"; then
-          tmp_export_symbols="$export_symbols"
-          test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
-          $opt_dry_run || eval '$ECHO "X$include_expsyms" | $Xsed | $SP2NL >> "$tmp_export_symbols"'
-        fi
-
-        if test "X$skipped_export" != "X:" && test -n "$orig_export_symbols"; then
-          # The given exports_symbols file has to be filtered, so filter it.
-          func_verbose "filter symbol list for \`$libname.la' to tag DATA exports"
-          # FIXME: $output_objdir/$libname.filter potentially contains lots of
-          # 's' commands which not all seds can handle. GNU sed should be fine
-          # though. Also, the filter scales superlinearly with the number of
-          # global variables. join(1) would be nice here, but unfortunately
-          # isn't a blessed tool.
-          $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
-          delfiles="$delfiles $export_symbols $output_objdir/$libname.filter"
-          export_symbols=$output_objdir/$libname.def
-          $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
-        fi
-
-        tmp_deplibs=
-        for test_deplib in $deplibs; do
-          case " $convenience " in
-          *" $test_deplib "*) ;;
-          *)
-            tmp_deplibs="$tmp_deplibs $test_deplib"
-            ;;
-          esac
-        done
-        deplibs="$tmp_deplibs"
-
-        if test -n "$convenience"; then
-          if test -n "$whole_archive_flag_spec" &&
-            test "$compiler_needs_object" = yes &&
-            test -z "$libobjs"; then
-            # extract the archives, so we have objects to list.
-            # TODO: could optimize this to just extract one archive.
-            whole_archive_flag_spec=
-          fi
-          if test -n "$whole_archive_flag_spec"; then
-            save_libobjs=$libobjs
-            eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
-            test "X$libobjs" = "X " && libobjs=
-          else
-            gentop="$output_objdir/${outputname}x"
-            generated="$generated $gentop"
-
-            func_extract_archives $gentop $convenience
-            libobjs="$libobjs $func_extract_archives_result"
-            test "X$libobjs" = "X " && libobjs=
-          fi
-        fi
-
-        if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
-          eval flag=\"$thread_safe_flag_spec\"
-          linker_flags="$linker_flags $flag"
-        fi
-
-        # Make a backup of the uninstalled library when relinking
-        if test "$mode" = relink; then
-          $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $?
-        fi
-
-        # Do each of the archive commands.
-        if test "$module" = yes && test -n "$module_cmds" ; then
-          if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
-            eval test_cmds=\"$module_expsym_cmds\"
-            cmds=$module_expsym_cmds
-          else
-            eval test_cmds=\"$module_cmds\"
-            cmds=$module_cmds
-          fi
-        else
-          if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
-            eval test_cmds=\"$archive_expsym_cmds\"
-            cmds=$archive_expsym_cmds
-          else
-            eval test_cmds=\"$archive_cmds\"
-            cmds=$archive_cmds
-          fi
-        fi
-
-        if test "X$skipped_export" != "X:" &&
-           func_len " $test_cmds" &&
-           len=$func_len_result &&
-           test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
-          :
-        else
-          # The command line is too long to link in one step, link piecewise
-          # or, if using GNU ld and skipped_export is not :, use a linker
-          # script.
-
-          # Save the value of $output and $libobjs because we want to
-          # use them later.  If we have whole_archive_flag_spec, we
-          # want to use save_libobjs as it was before
-          # whole_archive_flag_spec was expanded, because we can't
-          # assume the linker understands whole_archive_flag_spec.
-          # This may have to be revisited, in case too many
-          # convenience libraries get linked in and end up exceeding
-          # the spec.
-          if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then
-            save_libobjs=$libobjs
-          fi
-          save_output=$output
-          output_la=`$ECHO "X$output" | $Xsed -e "$basename"`
-
-          # Clear the reloadable object creation command queue and
-          # initialize k to one.
-          test_cmds=
-          concat_cmds=
-          objlist=
-          last_robj=
-          k=1
-
-          if test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "$with_gnu_ld" = yes; then
-            output=${output_objdir}/${output_la}.lnkscript
-            func_verbose "creating GNU ld script: $output"
-            $ECHO 'INPUT (' > $output
-            for obj in $save_libobjs
-            do
-              $ECHO "$obj" >> $output
-            done
-            $ECHO ')' >> $output
-            delfiles="$delfiles $output"
-          elif test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "X$file_list_spec" != X; then
-            output=${output_objdir}/${output_la}.lnk
-            func_verbose "creating linker input file list: $output"
-            : > $output
-            set x $save_libobjs
-            shift
-            firstobj=
-            if test "$compiler_needs_object" = yes; then
-              firstobj="$1 "
-              shift
-            fi
-            for obj
-            do
-              $ECHO "$obj" >> $output
-            done
-            delfiles="$delfiles $output"
-            output=$firstobj\"$file_list_spec$output\"
-          else
-            if test -n "$save_libobjs"; then
-              func_verbose "creating reloadable object files..."
-              output=$output_objdir/$output_la-${k}.$objext
-              eval test_cmds=\"$reload_cmds\"
-              func_len " $test_cmds"
-              len0=$func_len_result
-              len=$len0
-
-              # Loop over the list of objects to be linked.
-              for obj in $save_libobjs
-              do
-                func_len " $obj"
-                func_arith $len + $func_len_result
-                len=$func_arith_result
-                if test "X$objlist" = X ||
-                   test "$len" -lt "$max_cmd_len"; then
-                  func_append objlist " $obj"
-                else
-                  # The command $test_cmds is almost too long, add a
-                  # command to the queue.
-                  if test "$k" -eq 1 ; then
-                    # The first file doesn't have a previous command to add.
-                    eval concat_cmds=\"$reload_cmds $objlist $last_robj\"
-                  else
-                    # All subsequent reloadable object files will link in
-                    # the last one created.
-                    eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj~\$RM $last_robj\"
-                  fi
-                  last_robj=$output_objdir/$output_la-${k}.$objext
-                  func_arith $k + 1
-                  k=$func_arith_result
-                  output=$output_objdir/$output_la-${k}.$objext
-                  objlist=$obj
-                  func_len " $last_robj"
-                  func_arith $len0 + $func_len_result
-                  len=$func_arith_result
-                fi
-              done
-              # Handle the remaining objects by creating one last
-              # reloadable object file.  All subsequent reloadable object
-              # files will link in the last one created.
-              test -z "$concat_cmds" || concat_cmds=$concat_cmds~
-              eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\"
-              if test -n "$last_robj"; then
-                eval concat_cmds=\"\${concat_cmds}~\$RM $last_robj\"
-              fi
-              delfiles="$delfiles $output"
-
-            else
-              output=
-            fi
-
-            if ${skipped_export-false}; then
-              func_verbose "generating symbol list for \`$libname.la'"
-              export_symbols="$output_objdir/$libname.exp"
-              $opt_dry_run || $RM $export_symbols
-              libobjs=$output
-              # Append the command to create the export file.
-              test -z "$concat_cmds" || concat_cmds=$concat_cmds~
-              eval concat_cmds=\"\$concat_cmds$export_symbols_cmds\"
-              if test -n "$last_robj"; then
-                eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\"
-              fi
-            fi
-
-            test -n "$save_libobjs" &&
-              func_verbose "creating a temporary reloadable object file: $output"
-
-            # Loop through the commands generated above and execute them.
-            save_ifs="$IFS"; IFS='~'
-            for cmd in $concat_cmds; do
-              IFS="$save_ifs"
-              $opt_silent || {
-                  func_quote_for_expand "$cmd"
-                  eval "func_echo $func_quote_for_expand_result"
-              }
-              $opt_dry_run || eval "$cmd" || {
-                lt_exit=$?
-
-                # Restore the uninstalled library and exit
-                if test "$mode" = relink; then
-                  ( cd "$output_objdir" && \
-                    $RM "${realname}T" && \
-                    $MV "${realname}U" "$realname" )
-                fi
-
-                exit $lt_exit
-              }
-            done
-            IFS="$save_ifs"
-
-            if test -n "$export_symbols_regex" && ${skipped_export-false}; then
-              func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
-              func_show_eval '$MV "${export_symbols}T" "$export_symbols"'
-            fi
-          fi
-
-          if ${skipped_export-false}; then
-            if test -n "$export_symbols" && test -n "$include_expsyms"; then
-              tmp_export_symbols="$export_symbols"
-              test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
-              $opt_dry_run || eval '$ECHO "X$include_expsyms" | $Xsed | $SP2NL >> "$tmp_export_symbols"'
-            fi
-
-            if test -n "$orig_export_symbols"; then
-              # The given exports_symbols file has to be filtered, so filter it.
-              func_verbose "filter symbol list for \`$libname.la' to tag DATA exports"
-              # FIXME: $output_objdir/$libname.filter potentially contains lots of
-              # 's' commands which not all seds can handle. GNU sed should be fine
-              # though. Also, the filter scales superlinearly with the number of
-              # global variables. join(1) would be nice here, but unfortunately
-              # isn't a blessed tool.
-              $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
-              delfiles="$delfiles $export_symbols $output_objdir/$libname.filter"
-              export_symbols=$output_objdir/$libname.def
-              $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
-            fi
-          fi
-
-          libobjs=$output
-          # Restore the value of output.
-          output=$save_output
-
-          if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then
-            eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
-            test "X$libobjs" = "X " && libobjs=
-          fi
-          # Expand the library linking commands again to reset the
-          # value of $libobjs for piecewise linking.
-
-          # Do each of the archive commands.
-          if test "$module" = yes && test -n "$module_cmds" ; then
-            if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
-              cmds=$module_expsym_cmds
-            else
-              cmds=$module_cmds
-            fi
-          else
-            if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
-              cmds=$archive_expsym_cmds
-            else
-              cmds=$archive_cmds
-            fi
-          fi
-        fi
-
-        if test -n "$delfiles"; then
-          # Append the command to remove temporary files to $cmds.
-          eval cmds=\"\$cmds~\$RM $delfiles\"
-        fi
-
-        # Add any objects from preloaded convenience libraries
-        if test -n "$dlprefiles"; then
-          gentop="$output_objdir/${outputname}x"
-          generated="$generated $gentop"
-
-          func_extract_archives $gentop $dlprefiles
-          libobjs="$libobjs $func_extract_archives_result"
-          test "X$libobjs" = "X " && libobjs=
-        fi
-
-        save_ifs="$IFS"; IFS='~'
-        for cmd in $cmds; do
-          IFS="$save_ifs"
-          eval cmd=\"$cmd\"
-          $opt_silent || {
-            func_quote_for_expand "$cmd"
-            eval "func_echo $func_quote_for_expand_result"
-          }
-          $opt_dry_run || eval "$cmd" || {
-            lt_exit=$?
-
-            # Restore the uninstalled library and exit
-            if test "$mode" = relink; then
-              ( cd "$output_objdir" && \
-                $RM "${realname}T" && \
-                $MV "${realname}U" "$realname" )
-            fi
-
-            exit $lt_exit
-          }
-        done
-        IFS="$save_ifs"
-
-        # Restore the uninstalled library and exit
-        if test "$mode" = relink; then
-          $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $?
-
-          if test -n "$convenience"; then
-            if test -z "$whole_archive_flag_spec"; then
-              func_show_eval '${RM}r "$gentop"'
-            fi
-          fi
-
-          exit $EXIT_SUCCESS
-        fi
-
-        # Create links to the real library.
-        for linkname in $linknames; do
-          if test "$realname" != "$linkname"; then
-            func_show_eval '(cd "$output_objdir" && $RM "$linkname" && $LN_S "$realname" "$linkname")' 'exit $?'
-          fi
-        done
-
-        # If -module or -export-dynamic was specified, set the dlname.
-        if test "$module" = yes || test "$export_dynamic" = yes; then
-          # On all known operating systems, these are identical.
-          dlname="$soname"
-        fi
-      fi
-      ;;
-
-    obj)
-      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
-        func_warning "\`-dlopen' is ignored for objects"
-      fi
-
-      case " $deplibs" in
-      *\ -l* | *\ -L*)
-        func_warning "\`-l' and \`-L' are ignored for objects" ;;
-      esac
-
-      test -n "$rpath" && \
-        func_warning "\`-rpath' is ignored for objects"
-
-      test -n "$xrpath" && \
-        func_warning "\`-R' is ignored for objects"
-
-      test -n "$vinfo" && \
-        func_warning "\`-version-info' is ignored for objects"
-
-      test -n "$release" && \
-        func_warning "\`-release' is ignored for objects"
-
-      case $output in
-      *.lo)
-        test -n "$objs$old_deplibs" && \
-          func_fatal_error "cannot build library object \`$output' from non-libtool objects"
-
-        libobj=$output
-        func_lo2o "$libobj"
-        obj=$func_lo2o_result
-        ;;
-      *)
-        libobj=
-        obj="$output"
-        ;;
-      esac
-
-      # Delete the old objects.
-      $opt_dry_run || $RM $obj $libobj
-
-      # Objects from convenience libraries.  This assumes
-      # single-version convenience libraries.  Whenever we create
-      # different ones for PIC/non-PIC, this we'll have to duplicate
-      # the extraction.
-      reload_conv_objs=
-      gentop=
-      # reload_cmds runs $LD directly, so let us get rid of
-      # -Wl from whole_archive_flag_spec and hope we can get by with
-      # turning comma into space..
-      wl=
-
-      if test -n "$convenience"; then
-        if test -n "$whole_archive_flag_spec"; then
-          eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\"
-          reload_conv_objs=$reload_objs\ `$ECHO "X$tmp_whole_archive_flags" | $Xsed -e 's|,| |g'`
-        else
-          gentop="$output_objdir/${obj}x"
-          generated="$generated $gentop"
-
-          func_extract_archives $gentop $convenience
-          reload_conv_objs="$reload_objs $func_extract_archives_result"
-        fi
-      fi
-
-      # Create the old-style object.
-      reload_objs="$objs$old_deplibs "`$ECHO "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
-
-      output="$obj"
-      func_execute_cmds "$reload_cmds" 'exit $?'
-
-      # Exit if we aren't doing a library object file.
-      if test -z "$libobj"; then
-        if test -n "$gentop"; then
-          func_show_eval '${RM}r "$gentop"'
-        fi
-
-        exit $EXIT_SUCCESS
-      fi
-
-      if test "$build_libtool_libs" != yes; then
-        if test -n "$gentop"; then
-          func_show_eval '${RM}r "$gentop"'
-        fi
-
-        # Create an invalid libtool object if no PIC, so that we don't
-        # accidentally link it into a program.
-        # $show "echo timestamp > $libobj"
-        # $opt_dry_run || eval "echo timestamp > $libobj" || exit $?
-        exit $EXIT_SUCCESS
-      fi
-
-      if test -n "$pic_flag" || test "$pic_mode" != default; then
-        # Only do commands if we really have different PIC objects.
-        reload_objs="$libobjs $reload_conv_objs"
-        output="$libobj"
-        func_execute_cmds "$reload_cmds" 'exit $?'
-      fi
-
-      if test -n "$gentop"; then
-        func_show_eval '${RM}r "$gentop"'
-      fi
-
-      exit $EXIT_SUCCESS
-      ;;
-
-    prog)
-      case $host in
-        *cygwin*) func_stripname '' '.exe' "$output"
-                  output=$func_stripname_result.exe;;
-      esac
-      test -n "$vinfo" && \
-        func_warning "\`-version-info' is ignored for programs"
-
-      test -n "$release" && \
-        func_warning "\`-release' is ignored for programs"
-
-      test "$preload" = yes \
-        && test "$dlopen_support" = unknown \
-        && test "$dlopen_self" = unknown \
-        && test "$dlopen_self_static" = unknown && \
-          func_warning "\`LT_INIT([dlopen])' not used. Assuming no dlopen support."
-
-      case $host in
-      *-*-rhapsody* | *-*-darwin1.[012])
-        # On Rhapsody replace the C library is the System framework
-        compile_deplibs=`$ECHO "X $compile_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'`
-        finalize_deplibs=`$ECHO "X $finalize_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'`
-        ;;
-      esac
-
-      case $host in
-      *-*-darwin*)
-        # Don't allow lazy linking, it breaks C++ global constructors
-        # But is supposedly fixed on 10.4 or later (yay!).
-        if test "$tagname" = CXX ; then
-          case ${MACOSX_DEPLOYMENT_TARGET-10.0} in
-            10.[0123])
-              compile_command="$compile_command ${wl}-bind_at_load"
-              finalize_command="$finalize_command ${wl}-bind_at_load"
-            ;;
-          esac
-        fi
-        # Time to change all our "foo.ltframework" stuff back to "-framework foo"
-        compile_deplibs=`$ECHO "X $compile_deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
-        finalize_deplibs=`$ECHO "X $finalize_deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
-        ;;
-      esac
-
-
-      # move library search paths that coincide with paths to not yet
-      # installed libraries to the beginning of the library search list
-      new_libs=
-      for path in $notinst_path; do
-        case " $new_libs " in
-        *" -L$path/$objdir "*) ;;
-        *)
-          case " $compile_deplibs " in
-          *" -L$path/$objdir "*)
-            new_libs="$new_libs -L$path/$objdir" ;;
-          esac
-          ;;
-        esac
-      done
-      for deplib in $compile_deplibs; do
-        case $deplib in
-        -L*)
-          case " $new_libs " in
-          *" $deplib "*) ;;
-          *) new_libs="$new_libs $deplib" ;;
-          esac
-          ;;
-        *) new_libs="$new_libs $deplib" ;;
-        esac
-      done
-      compile_deplibs="$new_libs"
-
-
-      compile_command="$compile_command $compile_deplibs"
-      finalize_command="$finalize_command $finalize_deplibs"
-
-      if test -n "$rpath$xrpath"; then
-        # If the user specified any rpath flags, then add them.
-        for libdir in $rpath $xrpath; do
-          # This is the magic to use -rpath.
-          case "$finalize_rpath " in
-          *" $libdir "*) ;;
-          *) finalize_rpath="$finalize_rpath $libdir" ;;
-          esac
-        done
-      fi
-
-      # Now hardcode the library paths
-      rpath=
-      hardcode_libdirs=
-      for libdir in $compile_rpath $finalize_rpath; do
-        if test -n "$hardcode_libdir_flag_spec"; then
-          if test -n "$hardcode_libdir_separator"; then
-            if test -z "$hardcode_libdirs"; then
-              hardcode_libdirs="$libdir"
-            else
-              # Just accumulate the unique libdirs.
-              case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
-              *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
-                ;;
-              *)
-                hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
-                ;;
-              esac
-            fi
-          else
-            eval flag=\"$hardcode_libdir_flag_spec\"
-            rpath="$rpath $flag"
-          fi
-        elif test -n "$runpath_var"; then
-          case "$perm_rpath " in
-          *" $libdir "*) ;;
-          *) perm_rpath="$perm_rpath $libdir" ;;
-          esac
-        fi
-        case $host in
-        *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
-          testbindir=`${ECHO} "$libdir" | ${SED} -e 's*/lib$*/bin*'`
-          case :$dllsearchpath: in
-          *":$libdir:"*) ;;
-          ::) dllsearchpath=$libdir;;
-          *) dllsearchpath="$dllsearchpath:$libdir";;
-          esac
-          case :$dllsearchpath: in
-          *":$testbindir:"*) ;;
-          ::) dllsearchpath=$testbindir;;
-          *) dllsearchpath="$dllsearchpath:$testbindir";;
-          esac
-          ;;
-        esac
-      done
-      # Substitute the hardcoded libdirs into the rpath.
-      if test -n "$hardcode_libdir_separator" &&
-         test -n "$hardcode_libdirs"; then
-        libdir="$hardcode_libdirs"
-        eval rpath=\" $hardcode_libdir_flag_spec\"
-      fi
-      compile_rpath="$rpath"
-
-      rpath=
-      hardcode_libdirs=
-      for libdir in $finalize_rpath; do
-        if test -n "$hardcode_libdir_flag_spec"; then
-          if test -n "$hardcode_libdir_separator"; then
-            if test -z "$hardcode_libdirs"; then
-              hardcode_libdirs="$libdir"
-            else
-              # Just accumulate the unique libdirs.
-              case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
-              *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
-                ;;
-              *)
-                hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
-                ;;
-              esac
-            fi
-          else
-            eval flag=\"$hardcode_libdir_flag_spec\"
-            rpath="$rpath $flag"
-          fi
-        elif test -n "$runpath_var"; then
-          case "$finalize_perm_rpath " in
-          *" $libdir "*) ;;
-          *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;;
-          esac
-        fi
-      done
-      # Substitute the hardcoded libdirs into the rpath.
-      if test -n "$hardcode_libdir_separator" &&
-         test -n "$hardcode_libdirs"; then
-        libdir="$hardcode_libdirs"
-        eval rpath=\" $hardcode_libdir_flag_spec\"
-      fi
-      finalize_rpath="$rpath"
-
-      if test -n "$libobjs" && test "$build_old_libs" = yes; then
-        # Transform all the library objects into standard objects.
-        compile_command=`$ECHO "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
-        finalize_command=`$ECHO "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
-      fi
-
-      func_generate_dlsyms "$outputname" "@PROGRAM@" "no"
-
-      # template prelinking step
-      if test -n "$prelink_cmds"; then
-        func_execute_cmds "$prelink_cmds" 'exit $?'
-      fi
-
-      wrappers_required=yes
-      case $host in
-      *cygwin* | *mingw* )
-        if test "$build_libtool_libs" != yes; then
-          wrappers_required=no
-        fi
-        ;;
-      *cegcc)
-        # Disable wrappers for cegcc, we are cross compiling anyway.
-        wrappers_required=no
-        ;;
-      *)
-        if test "$need_relink" = no || test "$build_libtool_libs" != yes; then
-          wrappers_required=no
-        fi
-        ;;
-      esac
-      if test "$wrappers_required" = no; then
-        # Replace the output file specification.
-        compile_command=`$ECHO "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
-        link_command="$compile_command$compile_rpath"
-
-        # We have no uninstalled library dependencies, so finalize right now.
-        exit_status=0
-        func_show_eval "$link_command" 'exit_status=$?'
-
-        # Delete the generated files.
-        if test -f "$output_objdir/${outputname}S.${objext}"; then
-          func_show_eval '$RM "$output_objdir/${outputname}S.${objext}"'
-        fi
-
-        exit $exit_status
-      fi
-
-      if test -n "$compile_shlibpath$finalize_shlibpath"; then
-        compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command"
-      fi
-      if test -n "$finalize_shlibpath"; then
-        finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command"
-      fi
-
-      compile_var=
-      finalize_var=
-      if test -n "$runpath_var"; then
-        if test -n "$perm_rpath"; then
-          # We should set the runpath_var.
-          rpath=
-          for dir in $perm_rpath; do
-            rpath="$rpath$dir:"
-          done
-          compile_var="$runpath_var=\"$rpath\$$runpath_var\" "
-        fi
-        if test -n "$finalize_perm_rpath"; then
-          # We should set the runpath_var.
-          rpath=
-          for dir in $finalize_perm_rpath; do
-            rpath="$rpath$dir:"
-          done
-          finalize_var="$runpath_var=\"$rpath\$$runpath_var\" "
-        fi
-      fi
-
-      if test "$no_install" = yes; then
-        # We don't need to create a wrapper script.
-        link_command="$compile_var$compile_command$compile_rpath"
-        # Replace the output file specification.
-        link_command=`$ECHO "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
-        # Delete the old output file.
-        $opt_dry_run || $RM $output
-        # Link the executable and exit
-        func_show_eval "$link_command" 'exit $?'
-        exit $EXIT_SUCCESS
-      fi
-
-      if test "$hardcode_action" = relink; then
-        # Fast installation is not supported
-        link_command="$compile_var$compile_command$compile_rpath"
-        relink_command="$finalize_var$finalize_command$finalize_rpath"
-
-        func_warning "this platform does not like uninstalled shared libraries"
-        func_warning "\`$output' will be relinked during installation"
-      else
-        if test "$fast_install" != no; then
-          link_command="$finalize_var$compile_command$finalize_rpath"
-          if test "$fast_install" = yes; then
-            relink_command=`$ECHO "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'`
-          else
-            # fast_install is set to needless
-            relink_command=
-          fi
-        else
-          link_command="$compile_var$compile_command$compile_rpath"
-          relink_command="$finalize_var$finalize_command$finalize_rpath"
-        fi
-      fi
-
-      # Replace the output file specification.
-      link_command=`$ECHO "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
-
-      # Delete the old output files.
-      $opt_dry_run || $RM $output $output_objdir/$outputname $output_objdir/lt-$outputname
-
-      func_show_eval "$link_command" 'exit $?'
-
-      # Now create the wrapper script.
-      func_verbose "creating $output"
-
-      # Quote the relink command for shipping.
-      if test -n "$relink_command"; then
-        # Preserve any variables that may affect compiler behavior
-        for var in $variables_saved_for_relink; do
-          if eval test -z \"\${$var+set}\"; then
-            relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command"
-          elif eval var_value=\$$var; test -z "$var_value"; then
-            relink_command="$var=; export $var; $relink_command"
-          else
-            func_quote_for_eval "$var_value"
-            relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command"
-          fi
-        done
-        relink_command="(cd `pwd`; $relink_command)"
-        relink_command=`$ECHO "X$relink_command" | $Xsed -e "$sed_quote_subst"`
-      fi
-
-      # Quote $ECHO for shipping.
-      if test "X$ECHO" = "X$SHELL $progpath --fallback-echo"; then
-        case $progpath in
-        [\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $progpath --fallback-echo";;
-        *) qecho="$SHELL `pwd`/$progpath --fallback-echo";;
-        esac
-        qecho=`$ECHO "X$qecho" | $Xsed -e "$sed_quote_subst"`
-      else
-        qecho=`$ECHO "X$ECHO" | $Xsed -e "$sed_quote_subst"`
-      fi
-
-      # Only actually do things if not in dry run mode.
-      $opt_dry_run || {
-        # win32 will think the script is a binary if it has
-        # a .exe suffix, so we strip it off here.
-        case $output in
-          *.exe) func_stripname '' '.exe' "$output"
-                 output=$func_stripname_result ;;
-        esac
-        # test for cygwin because mv fails w/o .exe extensions
-        case $host in
-          *cygwin*)
-            exeext=.exe
-            func_stripname '' '.exe' "$outputname"
-            outputname=$func_stripname_result ;;
-          *) exeext= ;;
-        esac
-        case $host in
-          *cygwin* | *mingw* )
-            func_dirname_and_basename "$output" "" "."
-            output_name=$func_basename_result
-            output_path=$func_dirname_result
-            cwrappersource="$output_path/$objdir/lt-$output_name.c"
-            cwrapper="$output_path/$output_name.exe"
-            $RM $cwrappersource $cwrapper
-            trap "$RM $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15
-
-            func_emit_cwrapperexe_src > $cwrappersource
-
-            # The wrapper executable is built using the $host compiler,
-            # because it contains $host paths and files. If cross-
-            # compiling, it, like the target executable, must be
-            # executed on the $host or under an emulation environment.
-            $opt_dry_run || {
-              $LTCC $LTCFLAGS -o $cwrapper $cwrappersource
-              $STRIP $cwrapper
-            }
-
-            # Now, create the wrapper script for func_source use:
-            func_ltwrapper_scriptname $cwrapper
-            $RM $func_ltwrapper_scriptname_result
-            trap "$RM $func_ltwrapper_scriptname_result; exit $EXIT_FAILURE" 1 2 15
-            $opt_dry_run || {
-              # note: this script will not be executed, so do not chmod.
-              if test "x$build" = "x$host" ; then
-                $cwrapper --lt-dump-script > $func_ltwrapper_scriptname_result
-              else
-                func_emit_wrapper no > $func_ltwrapper_scriptname_result
-              fi
-            }
-          ;;
-          * )
-            $RM $output
-            trap "$RM $output; exit $EXIT_FAILURE" 1 2 15
-
-            func_emit_wrapper no > $output
-            chmod +x $output
-          ;;
-        esac
-      }
-      exit $EXIT_SUCCESS
-      ;;
-    esac
-
-    # See if we need to build an old-fashioned archive.
-    for oldlib in $oldlibs; do
-
-      if test "$build_libtool_libs" = convenience; then
-        oldobjs="$libobjs_save $symfileobj"
-        addlibs="$convenience"
-        build_libtool_libs=no
-      else
-        if test "$build_libtool_libs" = module; then
-          oldobjs="$libobjs_save"
-          build_libtool_libs=no
-        else
-          oldobjs="$old_deplibs $non_pic_objects"
-          if test "$preload" = yes && test -f "$symfileobj"; then
-            oldobjs="$oldobjs $symfileobj"
-          fi
-        fi
-        addlibs="$old_convenience"
-      fi
-
-      if test -n "$addlibs"; then
-        gentop="$output_objdir/${outputname}x"
-        generated="$generated $gentop"
-
-        func_extract_archives $gentop $addlibs
-        oldobjs="$oldobjs $func_extract_archives_result"
-      fi
-
-      # Do each command in the archive commands.
-      if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then
-        cmds=$old_archive_from_new_cmds
-      else
-
-        # Add any objects from preloaded convenience libraries
-        if test -n "$dlprefiles"; then
-          gentop="$output_objdir/${outputname}x"
-          generated="$generated $gentop"
-
-          func_extract_archives $gentop $dlprefiles
-          oldobjs="$oldobjs $func_extract_archives_result"
-        fi
-
-        # POSIX demands no paths to be encoded in archives.  We have
-        # to avoid creating archives with duplicate basenames if we
-        # might have to extract them afterwards, e.g., when creating a
-        # static archive out of a convenience library, or when linking
-        # the entirety of a libtool archive into another (currently
-        # not supported by libtool).
-        if (for obj in $oldobjs
-            do
-              func_basename "$obj"
-              $ECHO "$func_basename_result"
-            done | sort | sort -uc >/dev/null 2>&1); then
-          :
-        else
-          $ECHO "copying selected object files to avoid basename conflicts..."
-          gentop="$output_objdir/${outputname}x"
-          generated="$generated $gentop"
-          func_mkdir_p "$gentop"
-          save_oldobjs=$oldobjs
-          oldobjs=
-          counter=1
-          for obj in $save_oldobjs
-          do
-            func_basename "$obj"
-            objbase="$func_basename_result"
-            case " $oldobjs " in
-            " ") oldobjs=$obj ;;
-            *[\ /]"$objbase "*)
-              while :; do
-                # Make sure we don't pick an alternate name that also
-                # overlaps.
-                newobj=lt$counter-$objbase
-                func_arith $counter + 1
-                counter=$func_arith_result
-                case " $oldobjs " in
-                *[\ /]"$newobj "*) ;;
-                *) if test ! -f "$gentop/$newobj"; then break; fi ;;
-                esac
-              done
-              func_show_eval "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj"
-              oldobjs="$oldobjs $gentop/$newobj"
-              ;;
-            *) oldobjs="$oldobjs $obj" ;;
-            esac
-          done
-        fi
-        eval cmds=\"$old_archive_cmds\"
-
-        func_len " $cmds"
-        len=$func_len_result
-        if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
-          cmds=$old_archive_cmds
-        else
-          # the command line is too long to link in one step, link in parts
-          func_verbose "using piecewise archive linking..."
-          save_RANLIB=$RANLIB
-          RANLIB=:
-          objlist=
-          concat_cmds=
-          save_oldobjs=$oldobjs
-          oldobjs=
-          # Is there a better way of finding the last object in the list?
-          for obj in $save_oldobjs
-          do
-            last_oldobj=$obj
-          done
-          eval test_cmds=\"$old_archive_cmds\"
-          func_len " $test_cmds"
-          len0=$func_len_result
-          len=$len0
-          for obj in $save_oldobjs
-          do
-            func_len " $obj"
-            func_arith $len + $func_len_result
-            len=$func_arith_result
-            func_append objlist " $obj"
-            if test "$len" -lt "$max_cmd_len"; then
-              :
-            else
-              # the above command should be used before it gets too long
-              oldobjs=$objlist
-              if test "$obj" = "$last_oldobj" ; then
-                RANLIB=$save_RANLIB
-              fi
-              test -z "$concat_cmds" || concat_cmds=$concat_cmds~
-              eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\"
-              objlist=
-              len=$len0
-            fi
-          done
-          RANLIB=$save_RANLIB
-          oldobjs=$objlist
-          if test "X$oldobjs" = "X" ; then
-            eval cmds=\"\$concat_cmds\"
-          else
-            eval cmds=\"\$concat_cmds~\$old_archive_cmds\"
-          fi
-        fi
-      fi
-      func_execute_cmds "$cmds" 'exit $?'
-    done
-
-    test -n "$generated" && \
-      func_show_eval "${RM}r$generated"
-
-    # Now create the libtool archive.
-    case $output in
-    *.la)
-      old_library=
-      test "$build_old_libs" = yes && old_library="$libname.$libext"
-      func_verbose "creating $output"
-
-      # Preserve any variables that may affect compiler behavior
-      for var in $variables_saved_for_relink; do
-        if eval test -z \"\${$var+set}\"; then
-          relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command"
-        elif eval var_value=\$$var; test -z "$var_value"; then
-          relink_command="$var=; export $var; $relink_command"
-        else
-          func_quote_for_eval "$var_value"
-          relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command"
-        fi
-      done
-      # Quote the link command for shipping.
-      relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
-      relink_command=`$ECHO "X$relink_command" | $Xsed -e "$sed_quote_subst"`
-      if test "$hardcode_automatic" = yes ; then
-        relink_command=
-      fi
-
-      # Only create the output if not a dry run.
-      $opt_dry_run || {
-        for installed in no yes; do
-          if test "$installed" = yes; then
-            if test -z "$install_libdir"; then
-              break
-            fi
-            output="$output_objdir/$outputname"i
-            # Replace all uninstalled libtool libraries with the installed ones
-            newdependency_libs=
-            for deplib in $dependency_libs; do
-              case $deplib in
-              *.la)
-                func_basename "$deplib"
-                name="$func_basename_result"
-                eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
-                test -z "$libdir" && \
-                  func_fatal_error "\`$deplib' is not a valid libtool archive"
-                newdependency_libs="$newdependency_libs $libdir/$name"
-                ;;
-              *) newdependency_libs="$newdependency_libs $deplib" ;;
-              esac
-            done
-            dependency_libs="$newdependency_libs"
-            newdlfiles=
-
-            for lib in $dlfiles; do
-              case $lib in
-              *.la)
-                func_basename "$lib"
-                name="$func_basename_result"
-                eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
-                test -z "$libdir" && \
-                  func_fatal_error "\`$lib' is not a valid libtool archive"
-                newdlfiles="$newdlfiles $libdir/$name"
-                ;;
-              *) newdlfiles="$newdlfiles $lib" ;;
-              esac
-            done
-            dlfiles="$newdlfiles"
-            newdlprefiles=
-            for lib in $dlprefiles; do
-              case $lib in
-              *.la)
-                # Only pass preopened files to the pseudo-archive (for
-                # eventual linking with the app. that links it) if we
-                # didn't already link the preopened objects directly into
-                # the library:
-                func_basename "$lib"
-                name="$func_basename_result"
-                eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
-                test -z "$libdir" && \
-                  func_fatal_error "\`$lib' is not a valid libtool archive"
-                newdlprefiles="$newdlprefiles $libdir/$name"
-                ;;
-              esac
-            done
-            dlprefiles="$newdlprefiles"
-          else
-            newdlfiles=
-            for lib in $dlfiles; do
-              case $lib in
-                [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
-                *) abs=`pwd`"/$lib" ;;
-              esac
-              newdlfiles="$newdlfiles $abs"
-            done
-            dlfiles="$newdlfiles"
-            newdlprefiles=
-            for lib in $dlprefiles; do
-              case $lib in
-                [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
-                *) abs=`pwd`"/$lib" ;;
-              esac
-              newdlprefiles="$newdlprefiles $abs"
-            done
-            dlprefiles="$newdlprefiles"
-          fi
-          $RM $output
-          # place dlname in correct position for cygwin
-          tdlname=$dlname
-          case $host,$output,$installed,$module,$dlname in
-            *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;;
-          esac
-          $ECHO > $output "\
-# $outputname - a libtool library file
-# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
-#
-# Please DO NOT delete this file!
-# It is necessary for linking the library.
-
-# The name that we can dlopen(3).
-dlname='$tdlname'
-
-# Names of this library.
-library_names='$library_names'
-
-# The name of the static archive.
-old_library='$old_library'
-
-# Linker flags that can not go in dependency_libs.
-inherited_linker_flags='$new_inherited_linker_flags'
-
-# Libraries that this one depends upon.
-dependency_libs='$dependency_libs'
-
-# Names of additional weak libraries provided by this library
-weak_library_names='$weak_libs'
-
-# Version information for $libname.
-current=$current
-age=$age
-revision=$revision
-
-# Is this an already installed library?
-installed=$installed
-
-# Should we warn about portability when linking against -modules?
-shouldnotlink=$module
-
-# Files to dlopen/dlpreopen
-dlopen='$dlfiles'
-dlpreopen='$dlprefiles'
-
-# Directory that this library needs to be installed in:
-libdir='$install_libdir'"
-          if test "$installed" = no && test "$need_relink" = yes; then
-            $ECHO >> $output "\
-relink_command=\"$relink_command\""
-          fi
-        done
-      }
-
-      # Do a symbolic link so that the libtool archive can be found in
-      # LD_LIBRARY_PATH before the program is installed.
-      func_show_eval '( cd "$output_objdir" && $RM "$outputname" && $LN_S "../$outputname" "$outputname" )' 'exit $?'
-      ;;
-    esac
-    exit $EXIT_SUCCESS
-}
-
-{ test "$mode" = link || test "$mode" = relink; } &&
-    func_mode_link ${1+"$@"}
-
-
-# func_mode_uninstall arg...
-func_mode_uninstall ()
-{
-    $opt_debug
-    RM="$nonopt"
-    files=
-    rmforce=
-    exit_status=0
-
-    # This variable tells wrapper scripts just to set variables rather
-    # than running their programs.
-    libtool_install_magic="$magic"
-
-    for arg
-    do
-      case $arg in
-      -f) RM="$RM $arg"; rmforce=yes ;;
-      -*) RM="$RM $arg" ;;
-      *) files="$files $arg" ;;
-      esac
-    done
-
-    test -z "$RM" && \
-      func_fatal_help "you must specify an RM program"
-
-    rmdirs=
-
-    origobjdir="$objdir"
-    for file in $files; do
-      func_dirname "$file" "" "."
-      dir="$func_dirname_result"
-      if test "X$dir" = X.; then
-        objdir="$origobjdir"
-      else
-        objdir="$dir/$origobjdir"
-      fi
-      func_basename "$file"
-      name="$func_basename_result"
-      test "$mode" = uninstall && objdir="$dir"
-
-      # Remember objdir for removal later, being careful to avoid duplicates
-      if test "$mode" = clean; then
-        case " $rmdirs " in
-          *" $objdir "*) ;;
-          *) rmdirs="$rmdirs $objdir" ;;
-        esac
-      fi
-
-      # Don't error if the file doesn't exist and rm -f was used.
-      if { test -L "$file"; } >/dev/null 2>&1 ||
-         { test -h "$file"; } >/dev/null 2>&1 ||
-         test -f "$file"; then
-        :
-      elif test -d "$file"; then
-        exit_status=1
-        continue
-      elif test "$rmforce" = yes; then
-        continue
-      fi
-
-      rmfiles="$file"
-
-      case $name in
-      *.la)
-        # Possibly a libtool archive, so verify it.
-        if func_lalib_p "$file"; then
-          func_source $dir/$name
-
-          # Delete the libtool libraries and symlinks.
-          for n in $library_names; do
-            rmfiles="$rmfiles $objdir/$n"
-          done
-          test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library"
-
-          case "$mode" in
-          clean)
-            case "  $library_names " in
-            # "  " in the beginning catches empty $dlname
-            *" $dlname "*) ;;
-            *) rmfiles="$rmfiles $objdir/$dlname" ;;
-            esac
-            test -n "$libdir" && rmfiles="$rmfiles $objdir/$name $objdir/${name}i"
-            ;;
-          uninstall)
-            if test -n "$library_names"; then
-              # Do each command in the postuninstall commands.
-              func_execute_cmds "$postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1'
-            fi
-
-            if test -n "$old_library"; then
-              # Do each command in the old_postuninstall commands.
-              func_execute_cmds "$old_postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1'
-            fi
-            # FIXME: should reinstall the best remaining shared library.
-            ;;
-          esac
-        fi
-        ;;
-
-      *.lo)
-        # Possibly a libtool object, so verify it.
-        if func_lalib_p "$file"; then
-
-          # Read the .lo file
-          func_source $dir/$name
-
-          # Add PIC object to the list of files to remove.
-          if test -n "$pic_object" &&
-             test "$pic_object" != none; then
-            rmfiles="$rmfiles $dir/$pic_object"
-          fi
-
-          # Add non-PIC object to the list of files to remove.
-          if test -n "$non_pic_object" &&
-             test "$non_pic_object" != none; then
-            rmfiles="$rmfiles $dir/$non_pic_object"
-          fi
-        fi
-        ;;
-
-      *)
-        if test "$mode" = clean ; then
-          noexename=$name
-          case $file in
-          *.exe)
-            func_stripname '' '.exe' "$file"
-            file=$func_stripname_result
-            func_stripname '' '.exe' "$name"
-            noexename=$func_stripname_result
-            # $file with .exe has already been added to rmfiles,
-            # add $file without .exe
-            rmfiles="$rmfiles $file"
-            ;;
-          esac
-          # Do a test to see if this is a libtool program.
-          if func_ltwrapper_p "$file"; then
-            if func_ltwrapper_executable_p "$file"; then
-              func_ltwrapper_scriptname "$file"
-              relink_command=
-              func_source $func_ltwrapper_scriptname_result
-              rmfiles="$rmfiles $func_ltwrapper_scriptname_result"
-            else
-              relink_command=
-              func_source $dir/$noexename
-            fi
-
-            # note $name still contains .exe if it was in $file originally
-            # as does the version of $file that was added into $rmfiles
-            rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}"
-            if test "$fast_install" = yes && test -n "$relink_command"; then
-              rmfiles="$rmfiles $objdir/lt-$name"
-            fi
-            if test "X$noexename" != "X$name" ; then
-              rmfiles="$rmfiles $objdir/lt-${noexename}.c"
-            fi
-          fi
-        fi
-        ;;
-      esac
-      func_show_eval "$RM $rmfiles" 'exit_status=1'
-    done
-    objdir="$origobjdir"
-
-    # Try to remove the ${objdir}s in the directories where we deleted files
-    for dir in $rmdirs; do
-      if test -d "$dir"; then
-        func_show_eval "rmdir $dir >/dev/null 2>&1"
-      fi
-    done
-
-    exit $exit_status
-}
-
-{ test "$mode" = uninstall || test "$mode" = clean; } &&
-    func_mode_uninstall ${1+"$@"}
-
-test -z "$mode" && {
-  help="$generic_help"
-  func_fatal_help "you must specify a MODE"
-}
-
-test -z "$exec_cmd" && \
-  func_fatal_help "invalid operation mode \`$mode'"
-
-if test -n "$exec_cmd"; then
-  eval exec "$exec_cmd"
-  exit $EXIT_FAILURE
-fi
-
-exit $exit_status
-
-
-# The TAGs below are defined such that we never get into a situation
-# in which we disable both kinds of libraries.  Given conflicting
-# choices, we go for a static library, that is the most portable,
-# since we can't tell whether shared libraries were disabled because
-# the user asked for that or because the platform doesn't support
-# them.  This is particularly important on AIX, because we don't
-# support having both static and shared libraries enabled at the same
-# time on that platform, so we default to a shared-only configuration.
-# If a disable-shared tag is given, we'll fallback to a static-only
-# configuration.  But we'll never go from static-only to shared-only.
-
-# ### BEGIN LIBTOOL TAG CONFIG: disable-shared
-build_libtool_libs=no
-build_old_libs=yes
-# ### END LIBTOOL TAG CONFIG: disable-shared
-
-# ### BEGIN LIBTOOL TAG CONFIG: disable-static
-build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac`
-# ### END LIBTOOL TAG CONFIG: disable-static
-
-# Local Variables:
-# mode:shell-script
-# sh-indentation:2
-# End:
-# vi:sw=2
-
diff --git a/libraries/eet/m4/ac_attribute.m4 b/libraries/eet/m4/ac_attribute.m4
deleted file mode 100644
index 23479a9..0000000
--- a/libraries/eet/m4/ac_attribute.m4
+++ /dev/null
@@ -1,47 +0,0 @@
-dnl Copyright (C) 2004-2008 Kim Woelders
-dnl Copyright (C) 2008 Vincent Torri <vtorri at univ-evry dot fr>
-dnl That code is public domain and can be freely used or copied.
-dnl Originally snatched from somewhere...
-
-dnl Macro for checking if the compiler supports __attribute__
-
-dnl Usage: AC_C___ATTRIBUTE__
-dnl call AC_DEFINE for HAVE___ATTRIBUTE__ and __UNUSED__
-dnl if the compiler supports __attribute__, HAVE___ATTRIBUTE__ is
-dnl defined to 1 and __UNUSED__ is defined to __attribute__((unused))
-dnl otherwise, HAVE___ATTRIBUTE__ is not defined and __UNUSED__ is
-dnl defined to nothing.
-
-AC_DEFUN([AC_C___ATTRIBUTE__],
-[
-
-AC_MSG_CHECKING([for __attribute__])
-
-AC_CACHE_VAL([ac_cv___attribute__],
-   [AC_TRY_COMPILE(
-       [
-#include <stdlib.h>
-
-int func(int x);
-int foo(int x __attribute__ ((unused)))
-{
-   exit(1);
-}
-       ],
-       [],
-       [ac_cv___attribute__="yes"],
-       [ac_cv___attribute__="no"]
-    )])
-
-AC_MSG_RESULT($ac_cv___attribute__)
-
-if test "x${ac_cv___attribute__}" = "xyes" ; then
-   AC_DEFINE([HAVE___ATTRIBUTE__], [1], [Define to 1 if your compiler has __attribute__])
-   AC_DEFINE([__UNUSED__], [__attribute__((unused))], [Macro declaring a function argument to be unused])
-  else
-    AC_DEFINE([__UNUSED__], [], [Macro declaring a function argument to be unused])
-fi
-
-])
-
-dnl End of ac_attribute.m4
diff --git a/libraries/eet/m4/ac_path_generic.m4 b/libraries/eet/m4/ac_path_generic.m4
deleted file mode 100644
index d427241..0000000
--- a/libraries/eet/m4/ac_path_generic.m4
+++ /dev/null
@@ -1,137 +0,0 @@
-dnl @synopsis AC_PATH_GENERIC(LIBRARY [, MINIMUM-VERSION [, ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]]])
-dnl
-dnl Runs a LIBRARY-config script and defines LIBRARY_CFLAGS and LIBRARY_LIBS
-dnl
-dnl The script must support `--cflags' and `--libs' args.
-dnl If MINIMUM-VERSION is specified, the script must also support the
-dnl `--version' arg.
-dnl If the `--with-library-[exec-]prefix' arguments to ./configure are given,
-dnl it must also support `--prefix' and `--exec-prefix'.
-dnl (In other words, it must be like gtk-config.)
-dnl
-dnl For example:
-dnl
-dnl    AC_PATH_GENERIC(Foo, 1.0.0)
-dnl
-dnl would run `foo-config --version' and check that it is at least 1.0.0
-dnl
-dnl If so, the following would then be defined:
-dnl
-dnl    FOO_CFLAGS to `foo-config --cflags`
-dnl    FOO_LIBS   to `foo-config --libs`
-dnl
-dnl At present there is no support for additional "MODULES" (see AM_PATH_GTK)
-dnl (shamelessly stolen from gtk.m4 and then hacked around a fair amount)
-dnl
-dnl @author Angus Lees <gusl@cse.unsw.edu.au>
-
-AC_DEFUN([AC_PATH_GENERIC],
-[dnl
-dnl we're going to need uppercase, lowercase and user-friendly versions of the
-dnl string `LIBRARY'
-pushdef([UP], translit([$1], [a-z], [A-Z]))dnl
-pushdef([DOWN], translit([$1], [A-Z], [a-z]))dnl
-
-dnl
-dnl Get the cflags and libraries from the LIBRARY-config script
-dnl
-AC_ARG_WITH(DOWN-prefix,
-        [  --with-]DOWN[-prefix=PFX       Prefix where $1 is installed (optional)],
-        DOWN[]_config_prefix="$withval", DOWN[]_config_prefix="")
-AC_ARG_WITH(DOWN-exec-prefix,
-        [  --with-]DOWN[-exec-prefix=PFX  Exec prefix where $1 is installed (optional)],
-        DOWN[]_config_exec_prefix="$withval", DOWN[]_config_exec_prefix="")
-
-  if test x$DOWN[]_config_exec_prefix != x ; then
-     DOWN[]_config_args="$DOWN[]_config_args --exec-prefix=$DOWN[]_config_exec_prefix"
-     if test x${UP[]_CONFIG+set} != xset ; then
-       UP[]_CONFIG=$DOWN[]_config_exec_prefix/bin/DOWN-config
-     fi
-  fi
-  if test x$DOWN[]_config_prefix != x ; then
-     DOWN[]_config_args="$DOWN[]_config_args --prefix=$DOWN[]_config_prefix"
-     if test x${UP[]_CONFIG+set} != xset ; then
-       UP[]_CONFIG=$DOWN[]_config_prefix/bin/DOWN-config
-     fi
-  fi
-
-  AC_PATH_PROG(UP[]_CONFIG, DOWN-config, no)
-  ifelse([$2], ,
-     AC_MSG_CHECKING(for $1),
-     AC_MSG_CHECKING(for $1 - version >= $2)
-  )
-  no_[]DOWN=""
-  if test "$UP[]_CONFIG" = "no" ; then
-     no_[]DOWN=yes
-  else
-     UP[]_CFLAGS="`$UP[]_CONFIG $DOWN[]_config_args --cflags`"
-     UP[]_LIBS="`$UP[]_CONFIG $DOWN[]_config_args --libs`"
-     ifelse([$2], , ,[
-        DOWN[]_config_major_version=`$UP[]_CONFIG $DOWN[]_config_args \
-         --version | sed 's/[[^0-9]]*\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\).*/\1/'`
-        DOWN[]_config_minor_version=`$UP[]_CONFIG $DOWN[]_config_args \
-         --version | sed 's/[[^0-9]]*\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\).*/\2/'`
-        DOWN[]_config_micro_version=`$UP[]_CONFIG $DOWN[]_config_args \
-         --version | sed 's/[[^0-9]]*\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\).*/\3/'`
-        DOWN[]_wanted_major_version="regexp($2, [\<\([0-9]*\)], [\1])"
-        DOWN[]_wanted_minor_version="regexp($2, [\<\([0-9]*\)\.\([0-9]*\)], [\2])"
-        DOWN[]_wanted_micro_version="regexp($2, [\<\([0-9]*\).\([0-9]*\).\([0-9]*\)], [\3])"
-
-        # Compare wanted version to what config script returned.
-        # If I knew what library was being run, i'd probably also compile
-        # a test program at this point (which also extracted and tested
-        # the version in some library-specific way)
-        if test "$DOWN[]_config_major_version" -lt \
-                        "$DOWN[]_wanted_major_version" \
-          -o \( "$DOWN[]_config_major_version" -eq \
-                        "$DOWN[]_wanted_major_version" \
-            -a "$DOWN[]_config_minor_version" -lt \
-                        "$DOWN[]_wanted_minor_version" \) \
-          -o \( "$DOWN[]_config_major_version" -eq \
-                        "$DOWN[]_wanted_major_version" \
-            -a "$DOWN[]_config_minor_version" -eq \
-                        "$DOWN[]_wanted_minor_version" \
-            -a "$DOWN[]_config_micro_version" -lt \
-                        "$DOWN[]_wanted_micro_version" \) ; then
-          # older version found
-          no_[]DOWN=yes
-          echo -n "*** An old version of $1 "
-          echo -n "($DOWN[]_config_major_version"
-          echo -n ".$DOWN[]_config_minor_version"
-          echo    ".$DOWN[]_config_micro_version) was found."
-          echo -n "*** You need a version of $1 newer than "
-          echo -n "$DOWN[]_wanted_major_version"
-          echo -n ".$DOWN[]_wanted_minor_version"
-          echo    ".$DOWN[]_wanted_micro_version."
-          echo "***"
-          echo "*** If you have already installed a sufficiently new version, this error"
-          echo "*** probably means that the wrong copy of the DOWN-config shell script is"
-          echo "*** being found. The easiest way to fix this is to remove the old version"
-          echo "*** of $1, but you can also set the UP[]_CONFIG environment to point to the"
-          echo "*** correct copy of DOWN-config. (In this case, you will have to"
-          echo "*** modify your LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf"
-          echo "*** so that the correct libraries are found at run-time)"
-        fi
-     ])
-  fi
-  if test "x$no_[]DOWN" = x ; then
-     AC_MSG_RESULT(yes)
-     ifelse([$3], , :, [$3])
-  else
-     AC_MSG_RESULT(no)
-     if test "$UP[]_CONFIG" = "no" ; then
-       echo "*** The DOWN-config script installed by $1 could not be found"
-       echo "*** If $1 was installed in PREFIX, make sure PREFIX/bin is in"
-       echo "*** your path, or set the UP[]_CONFIG environment variable to the"
-       echo "*** full path to DOWN-config."
-     fi
-     UP[]_CFLAGS=""
-     UP[]_LIBS=""
-     ifelse([$4], , :, [$4])
-  fi
-  AC_SUBST(UP[]_CFLAGS)
-  AC_SUBST(UP[]_LIBS)
-
-  popdef([UP])
-  popdef([DOWN])
-])
diff --git a/libraries/eet/m4/efl_binary.m4 b/libraries/eet/m4/efl_binary.m4
deleted file mode 100644
index fc2f200..0000000
--- a/libraries/eet/m4/efl_binary.m4
+++ /dev/null
@@ -1,79 +0,0 @@
-dnl Copyright (C) 2010 Vincent Torri <vtorri at univ-evry dot fr>
-dnl That code is public domain and can be freely used or copied.
-
-dnl Macro that checks if a binary is built or not
-
-dnl Usage: EFL_ENABLE_BIN(binary)
-dnl Call AC_SUBST(BINARY_PRG) (BINARY is the uppercase of binary, - being transformed into _)
-dnl Define have_binary (- is transformed into _)
-dnl Define conditional BUILD_BINARY (BINARY is the uppercase of binary, - being transformed into _)
-
-AC_DEFUN([EFL_ENABLE_BIN],
-[
-
-m4_pushdef([UP], m4_translit([[$1]], [-a-z], [_A-Z]))dnl
-m4_pushdef([DOWN], m4_translit([[$1]], [-A-Z], [_a-z]))dnl
-
-have_[]m4_defn([DOWN])="yes"
-
-dnl configure option
-
-AC_ARG_ENABLE([$1],
-   [AC_HELP_STRING([--disable-$1], [disable building of ]DOWN)],
-   [
-    if test "x${enableval}" = "xyes" ; then
-       have_[]m4_defn([DOWN])="yes"
-    else
-       have_[]m4_defn([DOWN])="no"
-    fi
-   ])
-
-AC_MSG_CHECKING([whether to build ]DOWN[ binary])
-AC_MSG_RESULT([$have_[]m4_defn([DOWN])])
-
-if test "x$have_[]m4_defn([DOWN])" = "xyes"; then
-   UP[]_PRG=DOWN[${EXEEXT}]
-fi
-
-AC_SUBST(UP[]_PRG)
-
-AM_CONDITIONAL(BUILD_[]UP, test "x$have_[]m4_defn([DOWN])" = "xyes")
-
-AS_IF([test "x$have_[]m4_defn([DOWN])" = "xyes"], [$2], [$3])
-
-])
-
-dnl Macro that specifies the binary to be used
-
-dnl Usage: EFL_WITH_BIN(binary, package, msg)
-dnl Call AC_SUBST(BINARY_PRG) (BINARY is the uppercase of binary, - being transformed into _)
-dnl Define with_binary (- is transformed into _)
-dnl Define conditional BUILD_BINARY (BINARY is the uppercase of binary, - being transformed into _)
-
-AC_DEFUN([EFL_WITH_BIN],
-[
-
-m4_pushdef([UP], m4_translit([[$1]], [-a-z], [_A-Z]))dnl
-m4_pushdef([DOWN], m4_translit([[$1]], [-A-Z], [_a-z]))dnl
-
-AC_REQUIRE([PKG_PROG_PKG_CONFIG])
-AC_MSG_NOTICE([$PKG_CONFIG])
-
-with_[]m4_defn([DOWN])=m4_esyscmd($PKG_CONFIG --variable=prefix $2)/bin/m4_defn([DOWN])
-
-dnl configure option
-
-AC_ARG_WITH([$1],
-   [AC_HELP_STRING([--with-$1-bin=PATH], [specify a specific path to ]DOWN)],
-   [
-    with_[]m4_defn([DOWN])=$withval
-    _efl_msg="( explicitely set)"
-   ])
-
-AC_MSG_NOTICE([$msg: ]m4_defn([DOWN])[$_efl_msg])
-
-AC_SUBST(with_[]m4_defn([DOWN]))
-
-AS_IF([test "x$have_[]m4_defn([DOWN])" = "xyes"], [$4], [$5])
-
-])
diff --git a/libraries/eet/m4/efl_compiler_flag.m4 b/libraries/eet/m4/efl_compiler_flag.m4
deleted file mode 100644
index 618c6a6..0000000
--- a/libraries/eet/m4/efl_compiler_flag.m4
+++ /dev/null
@@ -1,57 +0,0 @@
-dnl Copyright (C) 2010 Vincent Torri <vtorri at univ-evry dot fr>
-dnl                and Albin Tonnerre <albin dot tonnerre at gmail dot com>
-dnl That code is public domain and can be freely used or copied.
-
-dnl Macro that checks if a compiler flag is supported by the compiler.
-
-dnl Usage: EFL_COMPILER_FLAG(flag)
-dnl flag is added to CFLAGS if supported.
-
-AC_DEFUN([EFL_COMPILER_FLAG],
-[
-
-CFLAGS_save="${CFLAGS}"
-CFLAGS="${CFLAGS} $1"
-  
-AC_LANG_PUSH([C])
-AC_MSG_CHECKING([whether the compiler supports $1])
-
-AC_COMPILE_IFELSE(
-   [AC_LANG_PROGRAM([[]])],
-   [have_flag="yes"],
-   [have_flag="no"])
-AC_MSG_RESULT([${have_flag}])
-
-if test "x${have_flag}" = "xno" ; then
-   CFLAGS="${CFLAGS_save}"
-fi
-AC_LANG_POP([C])
-
-])
-
-dnl Macro that checks if a linker flag is supported by the compiler.
-
-dnl Usage: EFL_LINKER_FLAG(flag)
-dnl flag is added to CFLAGS if supported (will be passed to ld anyway).
-
-AC_DEFUN([EFL_LINKER_FLAG],
-[
-
-CFLAGS_save="${CFLAGS}"
-CFLAGS="${CFLAGS} $1"
-  
-AC_LANG_PUSH([C])
-AC_MSG_CHECKING([whether the compiler supports $1])
-
-AC_LINK_IFELSE(
-   [AC_LANG_PROGRAM([[]])],
-   [have_flag="yes"],
-   [have_flag="no"])
-AC_MSG_RESULT([${have_flag}])
-
-if test "x${have_flag}" = "xno" ; then
-   CFLAGS="${CFLAGS_save}"
-fi
-AC_LANG_POP([C])
-
-])
diff --git a/libraries/eet/m4/efl_coverage.m4 b/libraries/eet/m4/efl_coverage.m4
deleted file mode 100644
index 85d0321..0000000
--- a/libraries/eet/m4/efl_coverage.m4
+++ /dev/null
@@ -1,62 +0,0 @@
-dnl Copyright (C) 2008 Vincent Torri <vtorri at univ-evry dot fr>
-dnl That code is public domain and can be freely used or copied.
-
-dnl Macro that check if coverage support is wanted and, if yes, if
-dnl lcov is available.
-
-dnl Usage: EFL_CHECK_COVERAGE(tests [, ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]])
-dnl The parameter 'tests' is used if a dependency is needed. If set to "yes",
-dnl the dependency is available.
-dnl Defines EFL_COVERAGE_CFLAGS and EFL_COVERAGE_LIBS variables
-dnl Defines the automake conditionnal EFL_ENABLE_COVERAGE
-
-AC_DEFUN([EFL_CHECK_COVERAGE],
-[
-
-dnl configure option
-
-AC_ARG_ENABLE([coverage],
-   [AC_HELP_STRING([--enable-coverage], [enable coverage profiling instrumentation @<:@default=disabled@:>@])],
-   [
-    if test "x${enableval}" = "xyes" ; then
-       _efl_enable_coverage="yes"
-    else
-       _efl_enable_coverage="no"
-    fi
-   ],
-   [_efl_enable_coverage="no"])
-
-AC_MSG_CHECKING([whether to use profiling instrumentation])
-AC_MSG_RESULT([$_efl_enable_coverage])
-
-dnl lcov check
-
-if test "x$_efl_enable_coverage" = "xyes" && test ! "x$1" = "xyes" ; then
-   AC_MSG_WARN([Coverage report requested but tests not being built, disable profiling instrumentation.])
-   AC_MSG_WARN([Run configure with --enable-tests])
-   _efl_enable_coverage="no"
-fi
-
-if test "x$_efl_enable_coverage" = "xyes" ; then
-   AC_CHECK_PROG(have_lcov, [lcov], [yes], [no])
-   if test "x$have_lcov" = "xyes" ; then
-      EFL_COVERAGE_CFLAGS="-fprofile-arcs -ftest-coverage"
-      EFL_COVERAGE_LIBS="-lgcov"
-# remove any optimisation flag and force debug symbols
-      EFL_DEBUG_CFLAGS="-g -O0 -DDEBUG"
-   else
-      AC_MSG_WARN([lcov is not found, disable profiling instrumentation])
-      _efl_enable_coverage="no"
-   fi
-fi
-
-dnl Substitution
-AC_SUBST(EFL_COVERAGE_CFLAGS)
-AC_SUBST(EFL_COVERAGE_LIBS)
-
-AM_CONDITIONAL(EFL_ENABLE_COVERAGE, test "x${_efl_enable_coverage}" = "xyes")
-
-AS_IF([test "x$_efl_enable_coverage" = "xyes"], [$2], [$3])
-])
-
-dnl End of efl_coverage.m4
diff --git a/libraries/eet/m4/efl_doxygen.m4 b/libraries/eet/m4/efl_doxygen.m4
deleted file mode 100644
index 7324af3..0000000
--- a/libraries/eet/m4/efl_doxygen.m4
+++ /dev/null
@@ -1,94 +0,0 @@
-dnl Copyright (C) 2008 Vincent Torri <vtorri at univ-evry dot fr>
-dnl That code is public domain and can be freely used or copied.
-
-dnl Macro that check if doxygen is available or not.
-
-dnl EFL_CHECK_DOXYGEN([ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]])
-dnl Test for the doxygen program
-dnl Defines efl_doxygen
-dnl Defines the automake conditionnal EFL_BUILD_DOC
-dnl
-AC_DEFUN([EFL_CHECK_DOXYGEN],
-[
-
-dnl
-dnl Disable the build of the documentation
-dnl
-AC_ARG_ENABLE([doc],
-   [AC_HELP_STRING(
-       [--disable-doc],
-       [Disable documentation build @<:@default=enabled@:>@])],
-   [
-    if test "x${enableval}" = "xyes" ; then
-       efl_enable_doc="yes"
-    else
-       efl_enable_doc="no"
-    fi
-   ],
-   [efl_enable_doc="yes"])
-
-AC_MSG_CHECKING([whether to build documentation])
-AC_MSG_RESULT([${efl_enable_doc}])
-
-if test "x${efl_enable_doc}" = "xyes" ; then
-
-dnl Specify the file name, without path
-
-   efl_doxygen="doxygen"
-
-   AC_ARG_WITH([doxygen],
-      [AC_HELP_STRING(
-          [--with-doxygen=FILE],
-          [doxygen program to use @<:@default=doxygen@:>@])],
-
-dnl Check the given doxygen program.
-
-      [efl_doxygen=${withval}
-       AC_CHECK_PROG([efl_have_doxygen],
-          [${efl_doxygen}],
-          [yes],
-          [no])
-       if test "x${efl_have_doxygen}" = "xno" ; then
-          echo "WARNING:"
-          echo "The doxygen program you specified:"
-          echo "${efl_doxygen}"
-          echo "was not found.  Please check the path and make sure "
-          echo "the program exists and is executable."
-          AC_MSG_WARN([no doxygen detected. Documentation will not be built])
-       fi
-      ],
-      [AC_CHECK_PROG([efl_have_doxygen],
-          [${efl_doxygen}],
-          [yes],
-          [no])
-       if test "x${efl_have_doxygen}" = "xno" ; then
-          echo "WARNING:"
-          echo "The doxygen program was not found in your execute path."
-          echo "You may have doxygen installed somewhere not covered by your path."
-          echo ""
-          echo "If this is the case make sure you have the packages installed, AND"
-          echo "that the doxygen program is in your execute path (see your"
-          echo "shell manual page on setting the \$PATH environment variable), OR"
-          echo "alternatively, specify the program to use with --with-doxygen."
-          AC_MSG_WARN([no doxygen detected. Documentation will not be built])
-       fi
-      ])
-else
-   efl_have_doxygen="no"
-fi
-
-dnl
-dnl Substitution
-dnl
-AC_SUBST([efl_doxygen])
-
-if ! test "x${efl_have_doxygen}" = "xyes" ; then
-   efl_enable_doc="no"
-fi
-
-AM_CONDITIONAL(EFL_BUILD_DOC, test "x${efl_have_doxygen}" = "xyes")
-
-AS_IF([test "x$efl_have_doxygen" = "xyes"], [$1], [$2])
-])
-
-dnl End of efl_doxygen.m4
diff --git a/libraries/eet/m4/efl_fnmatch.m4 b/libraries/eet/m4/efl_fnmatch.m4
deleted file mode 100644
index b5555ee..0000000
--- a/libraries/eet/m4/efl_fnmatch.m4
+++ /dev/null
@@ -1,43 +0,0 @@
-dnl Copyright (C) 2010 Vincent Torri <vtorri at univ-evry dot fr>
-dnl That code is public domain and can be freely used or copied.
-
-dnl Macro that check if fnmatch functions are available or not.
-
-dnl Usage: EFL_CHECK_FNMATCH([, ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]])
-dnl Call AC_SUBST(EFL_FNMATCH_LIBS)
-
-AC_DEFUN([EFL_CHECK_FNMATCH],
-[
-
-AC_CHECK_HEADER([fnmatch.h], [_efl_have_fnmatch="yes"], [_efl_have_fnmatch="no"])
-
-if test "x${_efl_have_fnmatch}" = "xyes" ; then
-   AC_SEARCH_LIBS([fnmatch],
-      [fnmatch evil iberty],
-      [_efl_have_fnmatch="yes"],
-      [_efl_have_fnmatch="no"])
-fi
-
-EFL_FNMATCH_LIBS=""
-
-if (! test "x${ac_cv_search_fnmatch}" = "xnone required") && (! test "x${ac_cv_search_fnmatch}" = "xno") && (! test "x${ac_cv_search_fnmatch}" = "x-levil") ; then
-   EFL_FNMATCH_LIBS=${ac_cv_search_fnmatch}
-fi
-
-if test "x${_efl_have_fnmatch}" != "xyes" -a "x${enable_exotic}" = "xyes"; then
-   LDFLAGS_SAVE="$LDFLAGS"
-   LDFLAGS="$LDFLAGS $EXOTIC_LIBS"
-   AC_CHECK_LIB([exotic], [fnmatch],
-                [_efl_have_fnmatch="yes"],
-                [_efl_have_fnmatch="no"])
-
-   if test "x${_efl_have_fnmatch}" = "xyes"; then
-      EFL_FNMATCH_LIBS="exotic"
-   fi
-fi
-
-AC_SUBST(EFL_FNMATCH_LIBS)
-
-AS_IF([test "x$_efl_have_fnmatch" = "xyes"], [$1], [$2])
-
-])
diff --git a/libraries/eet/m4/efl_path_max.m4 b/libraries/eet/m4/efl_path_max.m4
deleted file mode 100644
index f57bfd2..0000000
--- a/libraries/eet/m4/efl_path_max.m4
+++ /dev/null
@@ -1,36 +0,0 @@
-dnl Check for PATH_MAX in limits.h, and define a default value if not found
-dnl This is a workaround for systems not providing PATH_MAX, like GNU/Hurd
-
-dnl EFL_CHECK_PATH_MAX([DEFAULT_VALUE_IF_NOT_FOUND])
-dnl
-dnl If PATH_MAX is not defined in <limits.h>, defines it
-dnl to DEFAULT_VALUE_IF_NOT_FOUND if it exists, or fallback
-dnl to using 4096
-
-AC_DEFUN([EFL_CHECK_PATH_MAX],
-[
-
-default_max=m4_default([$1], "4096")
-AC_LANG_PUSH([C])
-
-AC_MSG_CHECKING([for PATH_MAX in limits.h])
-AC_COMPILE_IFELSE(
-   [AC_LANG_PROGRAM(
-       [[
-#include <limits.h>
-       ]],
-       [[
-int i = PATH_MAX;
-       ]])],
-   [AC_MSG_RESULT([yes])],
-   [
-    AC_DEFINE_UNQUOTED([PATH_MAX],
-       [${default_max}],
-       [default value since PATH_MAX is not defined])
-    AC_MSG_RESULT([no: using ${default_max}])
-   ])
-
-AC_LANG_POP([C])
-
-])
-dnl end of efl_path_max.m4
diff --git a/libraries/eet/m4/efl_tests.m4 b/libraries/eet/m4/efl_tests.m4
deleted file mode 100644
index 3a4dfe2..0000000
--- a/libraries/eet/m4/efl_tests.m4
+++ /dev/null
@@ -1,43 +0,0 @@
-dnl Copyright (C) 2008 Vincent Torri <vtorri at univ-evry dot fr>
-dnl That code is public domain and can be freely used or copied.
-
-dnl Macro that check if tests programs are wanted and if yes, if
-dnl the Check library is available.
-
-dnl Usage: EFL_CHECK_TESTS([ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]])
-dnl Define the automake conditionnal EFL_ENABLE_TESTS
-
-AC_DEFUN([EFL_CHECK_TESTS],
-[
-
-dnl configure option
-
-AC_ARG_ENABLE([tests],
-   [AC_HELP_STRING([--enable-tests], [enable tests @<:@default=disabled@:>@])],
-   [
-    if test "x${enableval}" = "xyes" ; then
-       _efl_enable_tests="yes"
-    else
-       _efl_enable_tests="no"
-    fi
-   ],
-   [_efl_enable_tests="no"])
-
-AC_MSG_CHECKING([whether tests are built])
-AC_MSG_RESULT([${_efl_enable_tests}])
-
-AC_REQUIRE([PKG_PROG_PKG_CONFIG])
-
-if test "x${_efl_enable_tests}" = "xyes" ; then
-   PKG_CHECK_MODULES([CHECK],
-      [check >= 0.9.5],
-      [dummy="yes"],
-      [_efl_enable_tests="no"])
-fi
-
-AM_CONDITIONAL(EFL_ENABLE_TESTS, test "x${_efl_enable_tests}" = "xyes")
-
-AS_IF([test "x$_efl_enable_tests" = "xyes"], [$1], [$2])
-])
-
-dnl End of efl_tests.m4
diff --git a/libraries/eet/m4/libtool.m4 b/libraries/eet/m4/libtool.m4
deleted file mode 100644
index a3fee53..0000000
--- a/libraries/eet/m4/libtool.m4
+++ /dev/null
@@ -1,7377 +0,0 @@
-# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
-#
-#   Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
-#                 2006, 2007, 2008 Free Software Foundation, Inc.
-#   Written by Gordon Matzigkeit, 1996
-#
-# This file is free software; the Free Software Foundation gives
-# unlimited permission to copy and/or distribute it, with or without
-# modifications, as long as this notice is preserved.
-
-m4_define([_LT_COPYING], [dnl
-#   Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
-#                 2006, 2007, 2008 Free Software Foundation, Inc.
-#   Written by Gordon Matzigkeit, 1996
-#
-#   This file is part of GNU Libtool.
-#
-# GNU Libtool is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# As a special exception to the GNU General Public License,
-# if you distribute this file as part of a program or library that
-# is built using GNU Libtool, you may include this file under the
-# same distribution terms that you use for the rest of that program.
-#
-# GNU Libtool is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with GNU Libtool; see the file COPYING.  If not, a copy
-# can be downloaded from http://www.gnu.org/licenses/gpl.html, or
-# obtained by writing to the Free Software Foundation, Inc.,
-# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-])
-
-# serial 56 LT_INIT
-
-
-# LT_PREREQ(VERSION)
-# ------------------
-# Complain and exit if this libtool version is less that VERSION.
-m4_defun([LT_PREREQ],
-[m4_if(m4_version_compare(m4_defn([LT_PACKAGE_VERSION]), [$1]), -1,
-       [m4_default([$3],
-                   [m4_fatal([Libtool version $1 or higher is required],
-                             63)])],
-       [$2])])
-
-
-# _LT_CHECK_BUILDDIR
-# ------------------
-# Complain if the absolute build directory name contains unusual characters
-m4_defun([_LT_CHECK_BUILDDIR],
-[case `pwd` in
-  *\ * | *\     *)
-    AC_MSG_WARN([Libtool does not cope well with whitespace in `pwd`]) ;;
-esac
-])
-
-
-# LT_INIT([OPTIONS])
-# ------------------
-AC_DEFUN([LT_INIT],
-[AC_PREREQ([2.58])dnl We use AC_INCLUDES_DEFAULT
-AC_BEFORE([$0], [LT_LANG])dnl
-AC_BEFORE([$0], [LT_OUTPUT])dnl
-AC_BEFORE([$0], [LTDL_INIT])dnl
-m4_require([_LT_CHECK_BUILDDIR])dnl
-
-dnl Autoconf doesn't catch unexpanded LT_ macros by default:
-m4_pattern_forbid([^_?LT_[A-Z_]+$])dnl
-m4_pattern_allow([^(_LT_EOF|LT_DLGLOBAL|LT_DLLAZY_OR_NOW|LT_MULTI_MODULE)$])dnl
-dnl aclocal doesn't pull ltoptions.m4, ltsugar.m4, or ltversion.m4
-dnl unless we require an AC_DEFUNed macro:
-AC_REQUIRE([LTOPTIONS_VERSION])dnl
-AC_REQUIRE([LTSUGAR_VERSION])dnl
-AC_REQUIRE([LTVERSION_VERSION])dnl
-AC_REQUIRE([LTOBSOLETE_VERSION])dnl
-m4_require([_LT_PROG_LTMAIN])dnl
-
-dnl Parse OPTIONS
-_LT_SET_OPTIONS([$0], [$1])
-
-# This can be used to rebuild libtool when needed
-LIBTOOL_DEPS="$ltmain"
-
-# Always use our own libtool.
-LIBTOOL='$(SHELL) $(top_builddir)/libtool'
-AC_SUBST(LIBTOOL)dnl
-
-_LT_SETUP
-
-# Only expand once:
-m4_define([LT_INIT])
-])# LT_INIT
-
-# Old names:
-AU_ALIAS([AC_PROG_LIBTOOL], [LT_INIT])
-AU_ALIAS([AM_PROG_LIBTOOL], [LT_INIT])
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AC_PROG_LIBTOOL], [])
-dnl AC_DEFUN([AM_PROG_LIBTOOL], [])
-
-
-# _LT_CC_BASENAME(CC)
-# -------------------
-# Calculate cc_basename.  Skip known compiler wrappers and cross-prefix.
-m4_defun([_LT_CC_BASENAME],
-[for cc_temp in $1""; do
-  case $cc_temp in
-    compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;;
-    distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;;
-    \-*) ;;
-    *) break;;
-  esac
-done
-cc_basename=`$ECHO "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
-])
-
-
-# _LT_FILEUTILS_DEFAULTS
-# ----------------------
-# It is okay to use these file commands and assume they have been set
-# sensibly after `m4_require([_LT_FILEUTILS_DEFAULTS])'.
-m4_defun([_LT_FILEUTILS_DEFAULTS],
-[: ${CP="cp -f"}
-: ${MV="mv -f"}
-: ${RM="rm -f"}
-])# _LT_FILEUTILS_DEFAULTS
-
-
-# _LT_SETUP
-# ---------
-m4_defun([_LT_SETUP],
-[AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_CANONICAL_BUILD])dnl
-_LT_DECL([], [host_alias], [0], [The host system])dnl
-_LT_DECL([], [host], [0])dnl
-_LT_DECL([], [host_os], [0])dnl
-dnl
-_LT_DECL([], [build_alias], [0], [The build system])dnl
-_LT_DECL([], [build], [0])dnl
-_LT_DECL([], [build_os], [0])dnl
-dnl
-AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([LT_PATH_LD])dnl
-AC_REQUIRE([LT_PATH_NM])dnl
-dnl
-AC_REQUIRE([AC_PROG_LN_S])dnl
-test -z "$LN_S" && LN_S="ln -s"
-_LT_DECL([], [LN_S], [1], [Whether we need soft or hard links])dnl
-dnl
-AC_REQUIRE([LT_CMD_MAX_LEN])dnl
-_LT_DECL([objext], [ac_objext], [0], [Object file suffix (normally "o")])dnl
-_LT_DECL([], [exeext], [0], [Executable file suffix (normally "")])dnl
-dnl
-m4_require([_LT_FILEUTILS_DEFAULTS])dnl
-m4_require([_LT_CHECK_SHELL_FEATURES])dnl
-m4_require([_LT_CMD_RELOAD])dnl
-m4_require([_LT_CHECK_MAGIC_METHOD])dnl
-m4_require([_LT_CMD_OLD_ARCHIVE])dnl
-m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl
-
-_LT_CONFIG_LIBTOOL_INIT([
-# See if we are running on zsh, and set the options which allow our
-# commands through without removal of \ escapes INIT.
-if test -n "\${ZSH_VERSION+set}" ; then
-   setopt NO_GLOB_SUBST
-fi
-])
-if test -n "${ZSH_VERSION+set}" ; then
-   setopt NO_GLOB_SUBST
-fi
-
-_LT_CHECK_OBJDIR
-
-m4_require([_LT_TAG_COMPILER])dnl
-_LT_PROG_ECHO_BACKSLASH
-
-case $host_os in
-aix3*)
-  # AIX sometimes has problems with the GCC collect2 program.  For some
-  # reason, if we set the COLLECT_NAMES environment variable, the problems
-  # vanish in a puff of smoke.
-  if test "X${COLLECT_NAMES+set}" != Xset; then
-    COLLECT_NAMES=
-    export COLLECT_NAMES
-  fi
-  ;;
-esac
-
-# Sed substitution that helps us do robust quoting.  It backslashifies
-# metacharacters that are still active within double-quoted strings.
-sed_quote_subst='s/\([["`$\\]]\)/\\\1/g'
-
-# Same as above, but do not quote variable references.
-double_quote_subst='s/\([["`\\]]\)/\\\1/g'
-
-# Sed substitution to delay expansion of an escaped shell variable in a
-# double_quote_subst'ed string.
-delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
-
-# Sed substitution to delay expansion of an escaped single quote.
-delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
-
-# Sed substitution to avoid accidental globbing in evaled expressions
-no_glob_subst='s/\*/\\\*/g'
-
-# Global variables:
-ofile=libtool
-can_build_shared=yes
-
-# All known linkers require a `.a' archive for static linking (except MSVC,
-# which needs '.lib').
-libext=a
-
-with_gnu_ld="$lt_cv_prog_gnu_ld"
-
-old_CC="$CC"
-old_CFLAGS="$CFLAGS"
-
-# Set sane defaults for various variables
-test -z "$CC" && CC=cc
-test -z "$LTCC" && LTCC=$CC
-test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
-test -z "$LD" && LD=ld
-test -z "$ac_objext" && ac_objext=o
-
-_LT_CC_BASENAME([$compiler])
-
-# Only perform the check for file, if the check method requires it
-test -z "$MAGIC_CMD" && MAGIC_CMD=file
-case $deplibs_check_method in
-file_magic*)
-  if test "$file_magic_cmd" = '$MAGIC_CMD'; then
-    _LT_PATH_MAGIC
-  fi
-  ;;
-esac
-
-# Use C for the default configuration in the libtool script
-LT_SUPPORTED_TAG([CC])
-_LT_LANG_C_CONFIG
-_LT_LANG_DEFAULT_CONFIG
-_LT_CONFIG_COMMANDS
-])# _LT_SETUP
-
-
-# _LT_PROG_LTMAIN
-# ---------------
-# Note that this code is called both from `configure', and `config.status'
-# now that we use AC_CONFIG_COMMANDS to generate libtool.  Notably,
-# `config.status' has no value for ac_aux_dir unless we are using Automake,
-# so we pass a copy along to make sure it has a sensible value anyway.
-m4_defun([_LT_PROG_LTMAIN],
-[m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([ltmain.sh])])dnl
-_LT_CONFIG_LIBTOOL_INIT([ac_aux_dir='$ac_aux_dir'])
-ltmain="$ac_aux_dir/ltmain.sh"
-])# _LT_PROG_LTMAIN
-
-
-## ------------------------------------- ##
-## Accumulate code for creating libtool. ##
-## ------------------------------------- ##
-
-# So that we can recreate a full libtool script including additional
-# tags, we accumulate the chunks of code to send to AC_CONFIG_COMMANDS
-# in macros and then make a single call at the end using the `libtool'
-# label.
-
-
-# _LT_CONFIG_LIBTOOL_INIT([INIT-COMMANDS])
-# ----------------------------------------
-# Register INIT-COMMANDS to be passed to AC_CONFIG_COMMANDS later.
-m4_define([_LT_CONFIG_LIBTOOL_INIT],
-[m4_ifval([$1],
-          [m4_append([_LT_OUTPUT_LIBTOOL_INIT],
-                     [$1
-])])])
-
-# Initialize.
-m4_define([_LT_OUTPUT_LIBTOOL_INIT])
-
-
-# _LT_CONFIG_LIBTOOL([COMMANDS])
-# ------------------------------
-# Register COMMANDS to be passed to AC_CONFIG_COMMANDS later.
-m4_define([_LT_CONFIG_LIBTOOL],
-[m4_ifval([$1],
-          [m4_append([_LT_OUTPUT_LIBTOOL_COMMANDS],
-                     [$1
-])])])
-
-# Initialize.
-m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS])
-
-
-# _LT_CONFIG_SAVE_COMMANDS([COMMANDS], [INIT_COMMANDS])
-# -----------------------------------------------------
-m4_defun([_LT_CONFIG_SAVE_COMMANDS],
-[_LT_CONFIG_LIBTOOL([$1])
-_LT_CONFIG_LIBTOOL_INIT([$2])
-])
-
-
-# _LT_FORMAT_COMMENT([COMMENT])
-# -----------------------------
-# Add leading comment marks to the start of each line, and a trailing
-# full-stop to the whole comment if one is not present already.
-m4_define([_LT_FORMAT_COMMENT],
-[m4_ifval([$1], [
-m4_bpatsubst([m4_bpatsubst([$1], [^ *], [# ])],
-              [['`$\]], [\\\&])]m4_bmatch([$1], [[!?.]$], [], [.])
-)])
-
-
-
-## ------------------------ ##
-## FIXME: Eliminate VARNAME ##
-## ------------------------ ##
-
-
-# _LT_DECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION], [IS-TAGGED?])
-# -------------------------------------------------------------------
-# CONFIGNAME is the name given to the value in the libtool script.
-# VARNAME is the (base) name used in the configure script.
-# VALUE may be 0, 1 or 2 for a computed quote escaped value based on
-# VARNAME.  Any other value will be used directly.
-m4_define([_LT_DECL],
-[lt_if_append_uniq([lt_decl_varnames], [$2], [, ],
-    [lt_dict_add_subkey([lt_decl_dict], [$2], [libtool_name],
-        [m4_ifval([$1], [$1], [$2])])
-    lt_dict_add_subkey([lt_decl_dict], [$2], [value], [$3])
-    m4_ifval([$4],
-        [lt_dict_add_subkey([lt_decl_dict], [$2], [description], [$4])])
-    lt_dict_add_subkey([lt_decl_dict], [$2],
-        [tagged?], [m4_ifval([$5], [yes], [no])])])
-])
-
-
-# _LT_TAGDECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION])
-# --------------------------------------------------------
-m4_define([_LT_TAGDECL], [_LT_DECL([$1], [$2], [$3], [$4], [yes])])
-
-
-# lt_decl_tag_varnames([SEPARATOR], [VARNAME1...])
-# ------------------------------------------------
-m4_define([lt_decl_tag_varnames],
-[_lt_decl_filter([tagged?], [yes], $@)])
-
-
-# _lt_decl_filter(SUBKEY, VALUE, [SEPARATOR], [VARNAME1..])
-# ---------------------------------------------------------
-m4_define([_lt_decl_filter],
-[m4_case([$#],
-  [0], [m4_fatal([$0: too few arguments: $#])],
-  [1], [m4_fatal([$0: too few arguments: $#: $1])],
-  [2], [lt_dict_filter([lt_decl_dict], [$1], [$2], [], lt_decl_varnames)],
-  [3], [lt_dict_filter([lt_decl_dict], [$1], [$2], [$3], lt_decl_varnames)],
-  [lt_dict_filter([lt_decl_dict], $@)])[]dnl
-])
-
-
-# lt_decl_quote_varnames([SEPARATOR], [VARNAME1...])
-# --------------------------------------------------
-m4_define([lt_decl_quote_varnames],
-[_lt_decl_filter([value], [1], $@)])
-
-
-# lt_decl_dquote_varnames([SEPARATOR], [VARNAME1...])
-# ---------------------------------------------------
-m4_define([lt_decl_dquote_varnames],
-[_lt_decl_filter([value], [2], $@)])
-
-
-# lt_decl_varnames_tagged([SEPARATOR], [VARNAME1...])
-# ---------------------------------------------------
-m4_define([lt_decl_varnames_tagged],
-[m4_assert([$# <= 2])dnl
-_$0(m4_quote(m4_default([$1], [[, ]])),
-    m4_ifval([$2], [[$2]], [m4_dquote(lt_decl_tag_varnames)]),
-    m4_split(m4_normalize(m4_quote(_LT_TAGS)), [ ]))])
-m4_define([_lt_decl_varnames_tagged],
-[m4_ifval([$3], [lt_combine([$1], [$2], [_], $3)])])
-
-
-# lt_decl_all_varnames([SEPARATOR], [VARNAME1...])
-# ------------------------------------------------
-m4_define([lt_decl_all_varnames],
-[_$0(m4_quote(m4_default([$1], [[, ]])),
-     m4_if([$2], [],
-           m4_quote(lt_decl_varnames),
-        m4_quote(m4_shift($@))))[]dnl
-])
-m4_define([_lt_decl_all_varnames],
-[lt_join($@, lt_decl_varnames_tagged([$1],
-                        lt_decl_tag_varnames([[, ]], m4_shift($@))))dnl
-])
-
-
-# _LT_CONFIG_STATUS_DECLARE([VARNAME])
-# ------------------------------------
-# Quote a variable value, and forward it to `config.status' so that its
-# declaration there will have the same value as in `configure'.  VARNAME
-# must have a single quote delimited value for this to work.
-m4_define([_LT_CONFIG_STATUS_DECLARE],
-[$1='`$ECHO "X$][$1" | $Xsed -e "$delay_single_quote_subst"`'])
-
-
-# _LT_CONFIG_STATUS_DECLARATIONS
-# ------------------------------
-# We delimit libtool config variables with single quotes, so when
-# we write them to config.status, we have to be sure to quote all
-# embedded single quotes properly.  In configure, this macro expands
-# each variable declared with _LT_DECL (and _LT_TAGDECL) into:
-#
-#    <var>='`$ECHO "X$<var>" | $Xsed -e "$delay_single_quote_subst"`'
-m4_defun([_LT_CONFIG_STATUS_DECLARATIONS],
-[m4_foreach([_lt_var], m4_quote(lt_decl_all_varnames),
-    [m4_n([_LT_CONFIG_STATUS_DECLARE(_lt_var)])])])
-
-
-# _LT_LIBTOOL_TAGS
-# ----------------
-# Output comment and list of tags supported by the script
-m4_defun([_LT_LIBTOOL_TAGS],
-[_LT_FORMAT_COMMENT([The names of the tagged configurations supported by this script])dnl
-available_tags="_LT_TAGS"dnl
-])
-
-
-# _LT_LIBTOOL_DECLARE(VARNAME, [TAG])
-# -----------------------------------
-# Extract the dictionary values for VARNAME (optionally with TAG) and
-# expand to a commented shell variable setting:
-#
-#    # Some comment about what VAR is for.
-#    visible_name=$lt_internal_name
-m4_define([_LT_LIBTOOL_DECLARE],
-[_LT_FORMAT_COMMENT(m4_quote(lt_dict_fetch([lt_decl_dict], [$1],
-                                           [description])))[]dnl
-m4_pushdef([_libtool_name],
-    m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [libtool_name])))[]dnl
-m4_case(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [value])),
-    [0], [_libtool_name=[$]$1],
-    [1], [_libtool_name=$lt_[]$1],
-    [2], [_libtool_name=$lt_[]$1],
-    [_libtool_name=lt_dict_fetch([lt_decl_dict], [$1], [value])])[]dnl
-m4_ifval([$2], [_$2])[]m4_popdef([_libtool_name])[]dnl
-])
-
-
-# _LT_LIBTOOL_CONFIG_VARS
-# -----------------------
-# Produce commented declarations of non-tagged libtool config variables
-# suitable for insertion in the LIBTOOL CONFIG section of the `libtool'
-# script.  Tagged libtool config variables (even for the LIBTOOL CONFIG
-# section) are produced by _LT_LIBTOOL_TAG_VARS.
-m4_defun([_LT_LIBTOOL_CONFIG_VARS],
-[m4_foreach([_lt_var],
-    m4_quote(_lt_decl_filter([tagged?], [no], [], lt_decl_varnames)),
-    [m4_n([_LT_LIBTOOL_DECLARE(_lt_var)])])])
-
-
-# _LT_LIBTOOL_TAG_VARS(TAG)
-# -------------------------
-m4_define([_LT_LIBTOOL_TAG_VARS],
-[m4_foreach([_lt_var], m4_quote(lt_decl_tag_varnames),
-    [m4_n([_LT_LIBTOOL_DECLARE(_lt_var, [$1])])])])
-
-
-# _LT_TAGVAR(VARNAME, [TAGNAME])
-# ------------------------------
-m4_define([_LT_TAGVAR], [m4_ifval([$2], [$1_$2], [$1])])
-
-
-# _LT_CONFIG_COMMANDS
-# -------------------
-# Send accumulated output to $CONFIG_STATUS.  Thanks to the lists of
-# variables for single and double quote escaping we saved from calls
-# to _LT_DECL, we can put quote escaped variables declarations
-# into `config.status', and then the shell code to quote escape them in
-# for loops in `config.status'.  Finally, any additional code accumulated
-# from calls to _LT_CONFIG_LIBTOOL_INIT is expanded.
-m4_defun([_LT_CONFIG_COMMANDS],
-[AC_PROVIDE_IFELSE([LT_OUTPUT],
-        dnl If the libtool generation code has been placed in $CONFIG_LT,
-        dnl instead of duplicating it all over again into config.status,
-        dnl then we will have config.status run $CONFIG_LT later, so it
-        dnl needs to know what name is stored there:
-        [AC_CONFIG_COMMANDS([libtool],
-            [$SHELL $CONFIG_LT || AS_EXIT(1)], [CONFIG_LT='$CONFIG_LT'])],
-    dnl If the libtool generation code is destined for config.status,
-    dnl expand the accumulated commands and init code now:
-    [AC_CONFIG_COMMANDS([libtool],
-        [_LT_OUTPUT_LIBTOOL_COMMANDS], [_LT_OUTPUT_LIBTOOL_COMMANDS_INIT])])
-])#_LT_CONFIG_COMMANDS
-
-
-# Initialize.
-m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS_INIT],
-[
-
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-
-sed_quote_subst='$sed_quote_subst'
-double_quote_subst='$double_quote_subst'
-delay_variable_subst='$delay_variable_subst'
-_LT_CONFIG_STATUS_DECLARATIONS
-LTCC='$LTCC'
-LTCFLAGS='$LTCFLAGS'
-compiler='$compiler_DEFAULT'
-
-# Quote evaled strings.
-for var in lt_decl_all_varnames([[ \
-]], lt_decl_quote_varnames); do
-    case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in
-    *[[\\\\\\\`\\"\\\$]]*)
-      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
-      ;;
-    *)
-      eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
-      ;;
-    esac
-done
-
-# Double-quote double-evaled strings.
-for var in lt_decl_all_varnames([[ \
-]], lt_decl_dquote_varnames); do
-    case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in
-    *[[\\\\\\\`\\"\\\$]]*)
-      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
-      ;;
-    *)
-      eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
-      ;;
-    esac
-done
-
-# Fix-up fallback echo if it was mangled by the above quoting rules.
-case \$lt_ECHO in
-*'\\\[$]0 --fallback-echo"')dnl "
-  lt_ECHO=\`\$ECHO "X\$lt_ECHO" | \$Xsed -e 's/\\\\\\\\\\\\\\\[$]0 --fallback-echo"\[$]/\[$]0 --fallback-echo"/'\`
-  ;;
-esac
-
-_LT_OUTPUT_LIBTOOL_INIT
-])
-
-
-# LT_OUTPUT
-# ---------
-# This macro allows early generation of the libtool script (before
-# AC_OUTPUT is called), incase it is used in configure for compilation
-# tests.
-AC_DEFUN([LT_OUTPUT],
-[: ${CONFIG_LT=./config.lt}
-AC_MSG_NOTICE([creating $CONFIG_LT])
-cat >"$CONFIG_LT" <<_LTEOF
-#! $SHELL
-# Generated by $as_me.
-# Run this file to recreate a libtool stub with the current configuration.
-
-lt_cl_silent=false
-SHELL=\${CONFIG_SHELL-$SHELL}
-_LTEOF
-
-cat >>"$CONFIG_LT" <<\_LTEOF
-AS_SHELL_SANITIZE
-_AS_PREPARE
-
-exec AS_MESSAGE_FD>&1
-exec AS_MESSAGE_LOG_FD>>config.log
-{
-  echo
-  AS_BOX([Running $as_me.])
-} >&AS_MESSAGE_LOG_FD
-
-lt_cl_help="\
-\`$as_me' creates a local libtool stub from the current configuration,
-for use in further configure time tests before the real libtool is
-generated.
-
-Usage: $[0] [[OPTIONS]]
-
-  -h, --help      print this help, then exit
-  -V, --version   print version number, then exit
-  -q, --quiet     do not print progress messages
-  -d, --debug     don't remove temporary files
-
-Report bugs to <bug-libtool@gnu.org>."
-
-lt_cl_version="\
-m4_ifset([AC_PACKAGE_NAME], [AC_PACKAGE_NAME ])config.lt[]dnl
-m4_ifset([AC_PACKAGE_VERSION], [ AC_PACKAGE_VERSION])
-configured by $[0], generated by m4_PACKAGE_STRING.
-
-Copyright (C) 2008 Free Software Foundation, Inc.
-This config.lt script is free software; the Free Software Foundation
-gives unlimited permision to copy, distribute and modify it."
-
-while test $[#] != 0
-do
-  case $[1] in
-    --version | --v* | -V )
-      echo "$lt_cl_version"; exit 0 ;;
-    --help | --h* | -h )
-      echo "$lt_cl_help"; exit 0 ;;
-    --debug | --d* | -d )
-      debug=: ;;
-    --quiet | --q* | --silent | --s* | -q )
-      lt_cl_silent=: ;;
-
-    -*) AC_MSG_ERROR([unrecognized option: $[1]
-Try \`$[0] --help' for more information.]) ;;
-
-    *) AC_MSG_ERROR([unrecognized argument: $[1]
-Try \`$[0] --help' for more information.]) ;;
-  esac
-  shift
-done
-
-if $lt_cl_silent; then
-  exec AS_MESSAGE_FD>/dev/null
-fi
-_LTEOF
-
-cat >>"$CONFIG_LT" <<_LTEOF
-_LT_OUTPUT_LIBTOOL_COMMANDS_INIT
-_LTEOF
-
-cat >>"$CONFIG_LT" <<\_LTEOF
-AC_MSG_NOTICE([creating $ofile])
-_LT_OUTPUT_LIBTOOL_COMMANDS
-AS_EXIT(0)
-_LTEOF
-chmod +x "$CONFIG_LT"
-
-# configure is writing to config.log, but config.lt does its own redirection,
-# appending to config.log, which fails on DOS, as config.log is still kept
-# open by configure.  Here we exec the FD to /dev/null, effectively closing
-# config.log, so it can be properly (re)opened and appended to by config.lt.
-if test "$no_create" != yes; then
-  lt_cl_success=:
-  test "$silent" = yes &&
-    lt_config_lt_args="$lt_config_lt_args --quiet"
-  exec AS_MESSAGE_LOG_FD>/dev/null
-  $SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false
-  exec AS_MESSAGE_LOG_FD>>config.log
-  $lt_cl_success || AS_EXIT(1)
-fi
-])# LT_OUTPUT
-
-
-# _LT_CONFIG(TAG)
-# ---------------
-# If TAG is the built-in tag, create an initial libtool script with a
-# default configuration from the untagged config vars.  Otherwise add code
-# to config.status for appending the configuration named by TAG from the
-# matching tagged config vars.
-m4_defun([_LT_CONFIG],
-[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
-_LT_CONFIG_SAVE_COMMANDS([
-  m4_define([_LT_TAG], m4_if([$1], [], [C], [$1]))dnl
-  m4_if(_LT_TAG, [C], [
-    # See if we are running on zsh, and set the options which allow our
-    # commands through without removal of \ escapes.
-    if test -n "${ZSH_VERSION+set}" ; then
-      setopt NO_GLOB_SUBST
-    fi
-
-    cfgfile="${ofile}T"
-    trap "$RM \"$cfgfile\"; exit 1" 1 2 15
-    $RM "$cfgfile"
-
-    cat <<_LT_EOF >> "$cfgfile"
-#! $SHELL
-
-# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
-# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION
-# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-# NOTE: Changes made to this file will be lost: look at ltmain.sh.
-#
-_LT_COPYING
-_LT_LIBTOOL_TAGS
-
-# ### BEGIN LIBTOOL CONFIG
-_LT_LIBTOOL_CONFIG_VARS
-_LT_LIBTOOL_TAG_VARS
-# ### END LIBTOOL CONFIG
-
-_LT_EOF
-
-  case $host_os in
-  aix3*)
-    cat <<\_LT_EOF >> "$cfgfile"
-# AIX sometimes has problems with the GCC collect2 program.  For some
-# reason, if we set the COLLECT_NAMES environment variable, the problems
-# vanish in a puff of smoke.
-if test "X${COLLECT_NAMES+set}" != Xset; then
-  COLLECT_NAMES=
-  export COLLECT_NAMES
-fi
-_LT_EOF
-    ;;
-  esac
-
-  _LT_PROG_LTMAIN
-
-  # We use sed instead of cat because bash on DJGPP gets confused if
-  # if finds mixed CR/LF and LF-only lines.  Since sed operates in
-  # text mode, it properly converts lines to CR/LF.  This bash problem
-  # is reportedly fixed, but why not run on old versions too?
-  sed '/^# Generated shell functions inserted here/q' "$ltmain" >> "$cfgfile" \
-    || (rm -f "$cfgfile"; exit 1)
-
-  _LT_PROG_XSI_SHELLFNS
-
-  sed -n '/^# Generated shell functions inserted here/,$p' "$ltmain" >> "$cfgfile" \
-    || (rm -f "$cfgfile"; exit 1)
-
-  mv -f "$cfgfile" "$ofile" ||
-    (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
-  chmod +x "$ofile"
-],
-[cat <<_LT_EOF >> "$ofile"
-
-dnl Unfortunately we have to use $1 here, since _LT_TAG is not expanded
-dnl in a comment (ie after a #).
-# ### BEGIN LIBTOOL TAG CONFIG: $1
-_LT_LIBTOOL_TAG_VARS(_LT_TAG)
-# ### END LIBTOOL TAG CONFIG: $1
-_LT_EOF
-])dnl /m4_if
-],
-[m4_if([$1], [], [
-    PACKAGE='$PACKAGE'
-    VERSION='$VERSION'
-    TIMESTAMP='$TIMESTAMP'
-    RM='$RM'
-    ofile='$ofile'], [])
-])dnl /_LT_CONFIG_SAVE_COMMANDS
-])# _LT_CONFIG
-
-
-# LT_SUPPORTED_TAG(TAG)
-# ---------------------
-# Trace this macro to discover what tags are supported by the libtool
-# --tag option, using:
-#    autoconf --trace 'LT_SUPPORTED_TAG:$1'
-AC_DEFUN([LT_SUPPORTED_TAG], [])
-
-
-# C support is built-in for now
-m4_define([_LT_LANG_C_enabled], [])
-m4_define([_LT_TAGS], [])
-
-
-# LT_LANG(LANG)
-# -------------
-# Enable libtool support for the given language if not already enabled.
-AC_DEFUN([LT_LANG],
-[AC_BEFORE([$0], [LT_OUTPUT])dnl
-m4_case([$1],
-  [C],                  [_LT_LANG(C)],
-  [C++],                [_LT_LANG(CXX)],
-  [Java],               [_LT_LANG(GCJ)],
-  [Fortran 77],         [_LT_LANG(F77)],
-  [Fortran],            [_LT_LANG(FC)],
-  [Windows Resource],   [_LT_LANG(RC)],
-  [m4_ifdef([_LT_LANG_]$1[_CONFIG],
-    [_LT_LANG($1)],
-    [m4_fatal([$0: unsupported language: "$1"])])])dnl
-])# LT_LANG
-
-
-# _LT_LANG(LANGNAME)
-# ------------------
-m4_defun([_LT_LANG],
-[m4_ifdef([_LT_LANG_]$1[_enabled], [],
-  [LT_SUPPORTED_TAG([$1])dnl
-  m4_append([_LT_TAGS], [$1 ])dnl
-  m4_define([_LT_LANG_]$1[_enabled], [])dnl
-  _LT_LANG_$1_CONFIG($1)])dnl
-])# _LT_LANG
-
-
-# _LT_LANG_DEFAULT_CONFIG
-# -----------------------
-m4_defun([_LT_LANG_DEFAULT_CONFIG],
-[AC_PROVIDE_IFELSE([AC_PROG_CXX],
-  [LT_LANG(CXX)],
-  [m4_define([AC_PROG_CXX], defn([AC_PROG_CXX])[LT_LANG(CXX)])])
-
-AC_PROVIDE_IFELSE([AC_PROG_F77],
-  [LT_LANG(F77)],
-  [m4_define([AC_PROG_F77], defn([AC_PROG_F77])[LT_LANG(F77)])])
-
-AC_PROVIDE_IFELSE([AC_PROG_FC],
-  [LT_LANG(FC)],
-  [m4_define([AC_PROG_FC], defn([AC_PROG_FC])[LT_LANG(FC)])])
-
-dnl The call to [A][M_PROG_GCJ] is quoted like that to stop aclocal
-dnl pulling things in needlessly.
-AC_PROVIDE_IFELSE([AC_PROG_GCJ],
-  [LT_LANG(GCJ)],
-  [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],
-    [LT_LANG(GCJ)],
-    [AC_PROVIDE_IFELSE([LT_PROG_GCJ],
-      [LT_LANG(GCJ)],
-      [m4_ifdef([AC_PROG_GCJ],
-        [m4_define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[LT_LANG(GCJ)])])
-       m4_ifdef([A][M_PROG_GCJ],
-        [m4_define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[LT_LANG(GCJ)])])
-       m4_ifdef([LT_PROG_GCJ],
-        [m4_define([LT_PROG_GCJ], defn([LT_PROG_GCJ])[LT_LANG(GCJ)])])])])])
-
-AC_PROVIDE_IFELSE([LT_PROG_RC],
-  [LT_LANG(RC)],
-  [m4_define([LT_PROG_RC], defn([LT_PROG_RC])[LT_LANG(RC)])])
-])# _LT_LANG_DEFAULT_CONFIG
-
-# Obsolete macros:
-AU_DEFUN([AC_LIBTOOL_CXX], [LT_LANG(C++)])
-AU_DEFUN([AC_LIBTOOL_F77], [LT_LANG(Fortran 77)])
-AU_DEFUN([AC_LIBTOOL_FC], [LT_LANG(Fortran)])
-AU_DEFUN([AC_LIBTOOL_GCJ], [LT_LANG(Java)])
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AC_LIBTOOL_CXX], [])
-dnl AC_DEFUN([AC_LIBTOOL_F77], [])
-dnl AC_DEFUN([AC_LIBTOOL_FC], [])
-dnl AC_DEFUN([AC_LIBTOOL_GCJ], [])
-
-
-# _LT_TAG_COMPILER
-# ----------------
-m4_defun([_LT_TAG_COMPILER],
-[AC_REQUIRE([AC_PROG_CC])dnl
-
-_LT_DECL([LTCC], [CC], [1], [A C compiler])dnl
-_LT_DECL([LTCFLAGS], [CFLAGS], [1], [LTCC compiler flags])dnl
-_LT_TAGDECL([CC], [compiler], [1], [A language specific compiler])dnl
-_LT_TAGDECL([with_gcc], [GCC], [0], [Is the compiler the GNU compiler?])dnl
-
-# If no C compiler was specified, use CC.
-LTCC=${LTCC-"$CC"}
-
-# If no C compiler flags were specified, use CFLAGS.
-LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
-
-# Allow CC to be a program name with arguments.
-compiler=$CC
-])# _LT_TAG_COMPILER
-
-
-# _LT_COMPILER_BOILERPLATE
-# ------------------------
-# Check for compiler boilerplate output or warnings with
-# the simple compiler test code.
-m4_defun([_LT_COMPILER_BOILERPLATE],
-[m4_require([_LT_DECL_SED])dnl
-ac_outfile=conftest.$ac_objext
-echo "$lt_simple_compile_test_code" >conftest.$ac_ext
-eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-_lt_compiler_boilerplate=`cat conftest.err`
-$RM conftest*
-])# _LT_COMPILER_BOILERPLATE
-
-
-# _LT_LINKER_BOILERPLATE
-# ----------------------
-# Check for linker boilerplate output or warnings with
-# the simple link test code.
-m4_defun([_LT_LINKER_BOILERPLATE],
-[m4_require([_LT_DECL_SED])dnl
-ac_outfile=conftest.$ac_objext
-echo "$lt_simple_link_test_code" >conftest.$ac_ext
-eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-_lt_linker_boilerplate=`cat conftest.err`
-$RM -r conftest*
-])# _LT_LINKER_BOILERPLATE
-
-# _LT_REQUIRED_DARWIN_CHECKS
-# -------------------------
-m4_defun_once([_LT_REQUIRED_DARWIN_CHECKS],[
-  case $host_os in
-    rhapsody* | darwin*)
-    AC_CHECK_TOOL([DSYMUTIL], [dsymutil], [:])
-    AC_CHECK_TOOL([NMEDIT], [nmedit], [:])
-    AC_CHECK_TOOL([LIPO], [lipo], [:])
-    AC_CHECK_TOOL([OTOOL], [otool], [:])
-    AC_CHECK_TOOL([OTOOL64], [otool64], [:])
-    _LT_DECL([], [DSYMUTIL], [1],
-      [Tool to manipulate archived DWARF debug symbol files on Mac OS X])
-    _LT_DECL([], [NMEDIT], [1],
-      [Tool to change global to local symbols on Mac OS X])
-    _LT_DECL([], [LIPO], [1],
-      [Tool to manipulate fat objects and archives on Mac OS X])
-    _LT_DECL([], [OTOOL], [1],
-      [ldd/readelf like tool for Mach-O binaries on Mac OS X])
-    _LT_DECL([], [OTOOL64], [1],
-      [ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4])
-
-    AC_CACHE_CHECK([for -single_module linker flag],[lt_cv_apple_cc_single_mod],
-      [lt_cv_apple_cc_single_mod=no
-      if test -z "${LT_MULTI_MODULE}"; then
-        # By default we will add the -single_module flag. You can override
-        # by either setting the environment variable LT_MULTI_MODULE
-        # non-empty at configure time, or by adding -multi_module to the
-        # link flags.
-        rm -rf libconftest.dylib*
-        echo "int foo(void){return 1;}" > conftest.c
-        echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
--dynamiclib -Wl,-single_module conftest.c" >&AS_MESSAGE_LOG_FD
-        $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
-          -dynamiclib -Wl,-single_module conftest.c 2>conftest.err
-        _lt_result=$?
-        if test -f libconftest.dylib && test ! -s conftest.err && test $_lt_result = 0; then
-          lt_cv_apple_cc_single_mod=yes
-        else
-          cat conftest.err >&AS_MESSAGE_LOG_FD
-        fi
-        rm -rf libconftest.dylib*
-        rm -f conftest.*
-      fi])
-    AC_CACHE_CHECK([for -exported_symbols_list linker flag],
-      [lt_cv_ld_exported_symbols_list],
-      [lt_cv_ld_exported_symbols_list=no
-      save_LDFLAGS=$LDFLAGS
-      echo "_main" > conftest.sym
-      LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym"
-      AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
-        [lt_cv_ld_exported_symbols_list=yes],
-        [lt_cv_ld_exported_symbols_list=no])
-        LDFLAGS="$save_LDFLAGS"
-    ])
-    case $host_os in
-    rhapsody* | darwin1.[[012]])
-      _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
-    darwin1.*)
-      _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
-    darwin*) # darwin 5.x on
-      # if running on 10.5 or later, the deployment target defaults
-      # to the OS version, if on x86, and 10.4, the deployment
-      # target defaults to 10.4. Don't you love it?
-      case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
-        10.0,*86*-darwin8*|10.0,*-darwin[[91]]*)
-          _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
-        10.[[012]]*)
-          _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
-        10.*)
-          _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
-      esac
-    ;;
-  esac
-    if test "$lt_cv_apple_cc_single_mod" = "yes"; then
-      _lt_dar_single_mod='$single_module'
-    fi
-    if test "$lt_cv_ld_exported_symbols_list" = "yes"; then
-      _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym'
-    else
-      _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}'
-    fi
-    if test "$DSYMUTIL" != ":"; then
-      _lt_dsymutil='~$DSYMUTIL $lib || :'
-    else
-      _lt_dsymutil=
-    fi
-    ;;
-  esac
-])
-
-
-# _LT_DARWIN_LINKER_FEATURES
-# --------------------------
-# Checks for linker and compiler features on darwin
-m4_defun([_LT_DARWIN_LINKER_FEATURES],
-[
-  m4_require([_LT_REQUIRED_DARWIN_CHECKS])
-  _LT_TAGVAR(archive_cmds_need_lc, $1)=no
-  _LT_TAGVAR(hardcode_direct, $1)=no
-  _LT_TAGVAR(hardcode_automatic, $1)=yes
-  _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
-  _LT_TAGVAR(whole_archive_flag_spec, $1)=''
-  _LT_TAGVAR(link_all_deplibs, $1)=yes
-  _LT_TAGVAR(allow_undefined_flag, $1)="$_lt_dar_allow_undefined"
-  case $cc_basename in
-     ifort*) _lt_dar_can_shared=yes ;;
-     *) _lt_dar_can_shared=$GCC ;;
-  esac
-  if test "$_lt_dar_can_shared" = "yes"; then
-    output_verbose_link_cmd=echo
-    _LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
-    _LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
-    _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
-    _LT_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
-    m4_if([$1], [CXX],
-[   if test "$lt_cv_apple_cc_single_mod" != "yes"; then
-      _LT_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}"
-      _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}"
-    fi
-],[])
-  else
-  _LT_TAGVAR(ld_shlibs, $1)=no
-  fi
-])
-
-# _LT_SYS_MODULE_PATH_AIX
-# -----------------------
-# Links a minimal program and checks the executable
-# for the system default hardcoded library path. In most cases,
-# this is /usr/lib:/lib, but when the MPI compilers are used
-# the location of the communication and MPI libs are included too.
-# If we don't find anything, use the default library path according
-# to the aix ld manual.
-m4_defun([_LT_SYS_MODULE_PATH_AIX],
-[m4_require([_LT_DECL_SED])dnl
-AC_LINK_IFELSE(AC_LANG_PROGRAM,[
-lt_aix_libpath_sed='
-    /Import File Strings/,/^$/ {
-        /^0/ {
-            s/^0  *\(.*\)$/\1/
-            p
-        }
-    }'
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-# Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then
-  aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-fi],[])
-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-])# _LT_SYS_MODULE_PATH_AIX
-
-
-# _LT_SHELL_INIT(ARG)
-# -------------------
-m4_define([_LT_SHELL_INIT],
-[ifdef([AC_DIVERSION_NOTICE],
-             [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)],
-         [AC_DIVERT_PUSH(NOTICE)])
-$1
-AC_DIVERT_POP
-])# _LT_SHELL_INIT
-
-
-# _LT_PROG_ECHO_BACKSLASH
-# -----------------------
-# Add some code to the start of the generated configure script which
-# will find an echo command which doesn't interpret backslashes.
-m4_defun([_LT_PROG_ECHO_BACKSLASH],
-[_LT_SHELL_INIT([
-# Check that we are running under the correct shell.
-SHELL=${CONFIG_SHELL-/bin/sh}
-
-case X$lt_ECHO in
-X*--fallback-echo)
-  # Remove one level of quotation (which was required for Make).
-  ECHO=`echo "$lt_ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','`
-  ;;
-esac
-
-ECHO=${lt_ECHO-echo}
-if test "X[$]1" = X--no-reexec; then
-  # Discard the --no-reexec flag, and continue.
-  shift
-elif test "X[$]1" = X--fallback-echo; then
-  # Avoid inline document here, it may be left over
-  :
-elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' ; then
-  # Yippee, $ECHO works!
-  :
-else
-  # Restart under the correct shell.
-  exec $SHELL "[$]0" --no-reexec ${1+"[$]@"}
-fi
-
-if test "X[$]1" = X--fallback-echo; then
-  # used as fallback echo
-  shift
-  cat <<_LT_EOF
-[$]*
-_LT_EOF
-  exit 0
-fi
-
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-
-if test -z "$lt_ECHO"; then
-  if test "X${echo_test_string+set}" != Xset; then
-    # find a string as large as possible, as long as the shell can cope with it
-    for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do
-      # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
-      if { echo_test_string=`eval $cmd`; } 2>/dev/null &&
-         { test "X$echo_test_string" = "X$echo_test_string"; } 2>/dev/null
-      then
-        break
-      fi
-    done
-  fi
-
-  if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' &&
-     echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` &&
-     test "X$echo_testing_string" = "X$echo_test_string"; then
-    :
-  else
-    # The Solaris, AIX, and Digital Unix default echo programs unquote
-    # backslashes.  This makes it impossible to quote backslashes using
-    #   echo "$something" | sed 's/\\/\\\\/g'
-    #
-    # So, first we look for a working echo in the user's PATH.
-
-    lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-    for dir in $PATH /usr/ucb; do
-      IFS="$lt_save_ifs"
-      if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
-         test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
-         echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
-         test "X$echo_testing_string" = "X$echo_test_string"; then
-        ECHO="$dir/echo"
-        break
-      fi
-    done
-    IFS="$lt_save_ifs"
-
-    if test "X$ECHO" = Xecho; then
-      # We didn't find a better echo, so look for alternatives.
-      if test "X`{ print -r '\t'; } 2>/dev/null`" = 'X\t' &&
-         echo_testing_string=`{ print -r "$echo_test_string"; } 2>/dev/null` &&
-         test "X$echo_testing_string" = "X$echo_test_string"; then
-        # This shell has a builtin print -r that does the trick.
-        ECHO='print -r'
-      elif { test -f /bin/ksh || test -f /bin/ksh$ac_exeext; } &&
-           test "X$CONFIG_SHELL" != X/bin/ksh; then
-        # If we have ksh, try running configure again with it.
-        ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
-        export ORIGINAL_CONFIG_SHELL
-        CONFIG_SHELL=/bin/ksh
-        export CONFIG_SHELL
-        exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"}
-      else
-        # Try using printf.
-        ECHO='printf %s\n'
-        if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' &&
-           echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` &&
-           test "X$echo_testing_string" = "X$echo_test_string"; then
-          # Cool, printf works
-          :
-        elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
-             test "X$echo_testing_string" = 'X\t' &&
-             echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
-             test "X$echo_testing_string" = "X$echo_test_string"; then
-          CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
-          export CONFIG_SHELL
-          SHELL="$CONFIG_SHELL"
-          export SHELL
-          ECHO="$CONFIG_SHELL [$]0 --fallback-echo"
-        elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
-             test "X$echo_testing_string" = 'X\t' &&
-             echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
-             test "X$echo_testing_string" = "X$echo_test_string"; then
-          ECHO="$CONFIG_SHELL [$]0 --fallback-echo"
-        else
-          # maybe with a smaller string...
-          prev=:
-
-          for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do
-            if { test "X$echo_test_string" = "X`eval $cmd`"; } 2>/dev/null
-            then
-              break
-            fi
-            prev="$cmd"
-          done
-
-          if test "$prev" != 'sed 50q "[$]0"'; then
-            echo_test_string=`eval $prev`
-            export echo_test_string
-            exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"}
-          else
-            # Oops.  We lost completely, so just stick with echo.
-            ECHO=echo
-          fi
-        fi
-      fi
-    fi
-  fi
-fi
-
-# Copy echo and quote the copy suitably for passing to libtool from
-# the Makefile, instead of quoting the original, which is used later.
-lt_ECHO=$ECHO
-if test "X$lt_ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then
-   lt_ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo"
-fi
-
-AC_SUBST(lt_ECHO)
-])
-_LT_DECL([], [SHELL], [1], [Shell to use when invoking shell scripts])
-_LT_DECL([], [ECHO], [1],
-    [An echo program that does not interpret backslashes])
-])# _LT_PROG_ECHO_BACKSLASH
-
-
-# _LT_ENABLE_LOCK
-# ---------------
-m4_defun([_LT_ENABLE_LOCK],
-[AC_ARG_ENABLE([libtool-lock],
-  [AS_HELP_STRING([--disable-libtool-lock],
-    [avoid locking (might break parallel builds)])])
-test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
-
-# Some flags need to be propagated to the compiler or linker for good
-# libtool support.
-case $host in
-ia64-*-hpux*)
-  # Find out which ABI we are using.
-  echo 'int i;' > conftest.$ac_ext
-  if AC_TRY_EVAL(ac_compile); then
-    case `/usr/bin/file conftest.$ac_objext` in
-      *ELF-32*)
-        HPUX_IA64_MODE="32"
-        ;;
-      *ELF-64*)
-        HPUX_IA64_MODE="64"
-        ;;
-    esac
-  fi
-  rm -rf conftest*
-  ;;
-*-*-irix6*)
-  # Find out which ABI we are using.
-  echo '[#]line __oline__ "configure"' > conftest.$ac_ext
-  if AC_TRY_EVAL(ac_compile); then
-    if test "$lt_cv_prog_gnu_ld" = yes; then
-      case `/usr/bin/file conftest.$ac_objext` in
-        *32-bit*)
-          LD="${LD-ld} -melf32bsmip"
-          ;;
-        *N32*)
-          LD="${LD-ld} -melf32bmipn32"
-          ;;
-        *64-bit*)
-          LD="${LD-ld} -melf64bmip"
-        ;;
-      esac
-    else
-      case `/usr/bin/file conftest.$ac_objext` in
-        *32-bit*)
-          LD="${LD-ld} -32"
-          ;;
-        *N32*)
-          LD="${LD-ld} -n32"
-          ;;
-        *64-bit*)
-          LD="${LD-ld} -64"
-          ;;
-      esac
-    fi
-  fi
-  rm -rf conftest*
-  ;;
-
-x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \
-s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
-  # Find out which ABI we are using.
-  echo 'int i;' > conftest.$ac_ext
-  if AC_TRY_EVAL(ac_compile); then
-    case `/usr/bin/file conftest.o` in
-      *32-bit*)
-        case $host in
-          x86_64-*kfreebsd*-gnu)
-            LD="${LD-ld} -m elf_i386_fbsd"
-            ;;
-          x86_64-*linux*)
-            LD="${LD-ld} -m elf_i386"
-            ;;
-          ppc64-*linux*|powerpc64-*linux*)
-            LD="${LD-ld} -m elf32ppclinux"
-            ;;
-          s390x-*linux*)
-            LD="${LD-ld} -m elf_s390"
-            ;;
-          sparc64-*linux*)
-            LD="${LD-ld} -m elf32_sparc"
-            ;;
-        esac
-        ;;
-      *64-bit*)
-        case $host in
-          x86_64-*kfreebsd*-gnu)
-            LD="${LD-ld} -m elf_x86_64_fbsd"
-            ;;
-          x86_64-*linux*)
-            LD="${LD-ld} -m elf_x86_64"
-            ;;
-          ppc*-*linux*|powerpc*-*linux*)
-            LD="${LD-ld} -m elf64ppc"
-            ;;
-          s390*-*linux*|s390*-*tpf*)
-            LD="${LD-ld} -m elf64_s390"
-            ;;
-          sparc*-*linux*)
-            LD="${LD-ld} -m elf64_sparc"
-            ;;
-        esac
-        ;;
-    esac
-  fi
-  rm -rf conftest*
-  ;;
-
-*-*-sco3.2v5*)
-  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
-  SAVE_CFLAGS="$CFLAGS"
-  CFLAGS="$CFLAGS -belf"
-  AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
-    [AC_LANG_PUSH(C)
-     AC_LINK_IFELSE([AC_LANG_PROGRAM([[]],[[]])],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
-     AC_LANG_POP])
-  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
-    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
-    CFLAGS="$SAVE_CFLAGS"
-  fi
-  ;;
-sparc*-*solaris*)
-  # Find out which ABI we are using.
-  echo 'int i;' > conftest.$ac_ext
-  if AC_TRY_EVAL(ac_compile); then
-    case `/usr/bin/file conftest.o` in
-    *64-bit*)
-      case $lt_cv_prog_gnu_ld in
-      yes*) LD="${LD-ld} -m elf64_sparc" ;;
-      *)
-        if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
-          LD="${LD-ld} -64"
-        fi
-        ;;
-      esac
-      ;;
-    esac
-  fi
-  rm -rf conftest*
-  ;;
-esac
-
-need_locks="$enable_libtool_lock"
-])# _LT_ENABLE_LOCK
-
-
-# _LT_CMD_OLD_ARCHIVE
-# -------------------
-m4_defun([_LT_CMD_OLD_ARCHIVE],
-[AC_CHECK_TOOL(AR, ar, false)
-test -z "$AR" && AR=ar
-test -z "$AR_FLAGS" && AR_FLAGS=cru
-_LT_DECL([], [AR], [1], [The archiver])
-_LT_DECL([], [AR_FLAGS], [1])
-
-AC_CHECK_TOOL(STRIP, strip, :)
-test -z "$STRIP" && STRIP=:
-_LT_DECL([], [STRIP], [1], [A symbol stripping program])
-
-AC_CHECK_TOOL(RANLIB, ranlib, :)
-test -z "$RANLIB" && RANLIB=:
-_LT_DECL([], [RANLIB], [1],
-    [Commands used to install an old-style archive])
-
-# Determine commands to create old-style static archives.
-old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
-old_postinstall_cmds='chmod 644 $oldlib'
-old_postuninstall_cmds=
-
-if test -n "$RANLIB"; then
-  case $host_os in
-  openbsd*)
-    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib"
-    ;;
-  *)
-    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib"
-    ;;
-  esac
-  old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
-fi
-_LT_DECL([], [old_postinstall_cmds], [2])
-_LT_DECL([], [old_postuninstall_cmds], [2])
-_LT_TAGDECL([], [old_archive_cmds], [2],
-    [Commands used to build an old-style archive])
-])# _LT_CMD_OLD_ARCHIVE
-
-
-# _LT_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
-#               [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE])
-# ----------------------------------------------------------------
-# Check whether the given compiler option works
-AC_DEFUN([_LT_COMPILER_OPTION],
-[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
-m4_require([_LT_DECL_SED])dnl
-AC_CACHE_CHECK([$1], [$2],
-  [$2=no
-   m4_if([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4])
-   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-   lt_compiler_flag="$3"
-   # Insert the option either (1) after the last *FLAGS variable, or
-   # (2) before a word containing "conftest.", or (3) at the end.
-   # Note that $ac_compile itself does not contain backslashes and begins
-   # with a dollar sign (not a hyphen), so the echo should work correctly.
-   # The option is referenced via a variable to avoid confusing sed.
-   lt_compile=`echo "$ac_compile" | $SED \
-   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-   -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
-   -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
-   (eval "$lt_compile" 2>conftest.err)
-   ac_status=$?
-   cat conftest.err >&AS_MESSAGE_LOG_FD
-   echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
-   if (exit $ac_status) && test -s "$ac_outfile"; then
-     # The compiler can only warn and ignore the option if not recognized
-     # So say no if there are warnings other than the usual output.
-     $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
-     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
-       $2=yes
-     fi
-   fi
-   $RM conftest*
-])
-
-if test x"[$]$2" = xyes; then
-    m4_if([$5], , :, [$5])
-else
-    m4_if([$6], , :, [$6])
-fi
-])# _LT_COMPILER_OPTION
-
-# Old name:
-AU_ALIAS([AC_LIBTOOL_COMPILER_OPTION], [_LT_COMPILER_OPTION])
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION], [])
-
-
-# _LT_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
-#                  [ACTION-SUCCESS], [ACTION-FAILURE])
-# ----------------------------------------------------
-# Check whether the given linker option works
-AC_DEFUN([_LT_LINKER_OPTION],
-[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
-m4_require([_LT_DECL_SED])dnl
-AC_CACHE_CHECK([$1], [$2],
-  [$2=no
-   save_LDFLAGS="$LDFLAGS"
-   LDFLAGS="$LDFLAGS $3"
-   echo "$lt_simple_link_test_code" > conftest.$ac_ext
-   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
-     # The linker can only warn and ignore the option if not recognized
-     # So say no if there are warnings
-     if test -s conftest.err; then
-       # Append any errors to the config.log.
-       cat conftest.err 1>&AS_MESSAGE_LOG_FD
-       $ECHO "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
-       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-       if diff conftest.exp conftest.er2 >/dev/null; then
-         $2=yes
-       fi
-     else
-       $2=yes
-     fi
-   fi
-   $RM -r conftest*
-   LDFLAGS="$save_LDFLAGS"
-])
-
-if test x"[$]$2" = xyes; then
-    m4_if([$4], , :, [$4])
-else
-    m4_if([$5], , :, [$5])
-fi
-])# _LT_LINKER_OPTION
-
-# Old name:
-AU_ALIAS([AC_LIBTOOL_LINKER_OPTION], [_LT_LINKER_OPTION])
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], [])
-
-
-# LT_CMD_MAX_LEN
-#---------------
-AC_DEFUN([LT_CMD_MAX_LEN],
-[AC_REQUIRE([AC_CANONICAL_HOST])dnl
-# find the maximum length of command line arguments
-AC_MSG_CHECKING([the maximum length of command line arguments])
-AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
-  i=0
-  teststring="ABCD"
-
-  case $build_os in
-  msdosdjgpp*)
-    # On DJGPP, this test can blow up pretty badly due to problems in libc
-    # (any single argument exceeding 2000 bytes causes a buffer overrun
-    # during glob expansion).  Even if it were fixed, the result of this
-    # check would be larger than it should be.
-    lt_cv_sys_max_cmd_len=12288;    # 12K is about right
-    ;;
-
-  gnu*)
-    # Under GNU Hurd, this test is not required because there is
-    # no limit to the length of command line arguments.
-    # Libtool will interpret -1 as no limit whatsoever
-    lt_cv_sys_max_cmd_len=-1;
-    ;;
-
-  cygwin* | mingw* | cegcc*)
-    # On Win9x/ME, this test blows up -- it succeeds, but takes
-    # about 5 minutes as the teststring grows exponentially.
-    # Worse, since 9x/ME are not pre-emptively multitasking,
-    # you end up with a "frozen" computer, even though with patience
-    # the test eventually succeeds (with a max line length of 256k).
-    # Instead, let's just punt: use the minimum linelength reported by
-    # all of the supported platforms: 8192 (on NT/2K/XP).
-    lt_cv_sys_max_cmd_len=8192;
-    ;;
-
-  amigaos*)
-    # On AmigaOS with pdksh, this test takes hours, literally.
-    # So we just punt and use a minimum line length of 8192.
-    lt_cv_sys_max_cmd_len=8192;
-    ;;
-
-  netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
-    # This has been around since 386BSD, at least.  Likely further.
-    if test -x /sbin/sysctl; then
-      lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
-    elif test -x /usr/sbin/sysctl; then
-      lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
-    else
-      lt_cv_sys_max_cmd_len=65536       # usable default for all BSDs
-    fi
-    # And add a safety zone
-    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
-    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
-    ;;
-
-  interix*)
-    # We know the value 262144 and hardcode it with a safety zone (like BSD)
-    lt_cv_sys_max_cmd_len=196608
-    ;;
-
-  osf*)
-    # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
-    # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
-    # nice to cause kernel panics so lets avoid the loop below.
-    # First set a reasonable default.
-    lt_cv_sys_max_cmd_len=16384
-    #
-    if test -x /sbin/sysconfig; then
-      case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
-        *1*) lt_cv_sys_max_cmd_len=-1 ;;
-      esac
-    fi
-    ;;
-  sco3.2v5*)
-    lt_cv_sys_max_cmd_len=102400
-    ;;
-  sysv5* | sco5v6* | sysv4.2uw2*)
-    kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
-    if test -n "$kargmax"; then
-      lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[         ]]//'`
-    else
-      lt_cv_sys_max_cmd_len=32768
-    fi
-    ;;
-  *)
-    lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
-    if test -n "$lt_cv_sys_max_cmd_len"; then
-      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
-      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
-    else
-      # Make teststring a little bigger before we do anything with it.
-      # a 1K string should be a reasonable start.
-      for i in 1 2 3 4 5 6 7 8 ; do
-        teststring=$teststring$teststring
-      done
-      SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
-      # If test is not a shell built-in, we'll probably end up computing a
-      # maximum length that is only half of the actual maximum length, but
-      # we can't tell.
-      while { test "X"`$SHELL [$]0 --fallback-echo "X$teststring$teststring" 2>/dev/null` \
-                 = "XX$teststring$teststring"; } >/dev/null 2>&1 &&
-              test $i != 17 # 1/2 MB should be enough
-      do
-        i=`expr $i + 1`
-        teststring=$teststring$teststring
-      done
-      # Only check the string length outside the loop.
-      lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1`
-      teststring=
-      # Add a significant safety factor because C++ compilers can tack on
-      # massive amounts of additional arguments before passing them to the
-      # linker.  It appears as though 1/2 is a usable value.
-      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
-    fi
-    ;;
-  esac
-])
-if test -n $lt_cv_sys_max_cmd_len ; then
-  AC_MSG_RESULT($lt_cv_sys_max_cmd_len)
-else
-  AC_MSG_RESULT(none)
-fi
-max_cmd_len=$lt_cv_sys_max_cmd_len
-_LT_DECL([], [max_cmd_len], [0],
-    [What is the maximum length of a command?])
-])# LT_CMD_MAX_LEN
-
-# Old name:
-AU_ALIAS([AC_LIBTOOL_SYS_MAX_CMD_LEN], [LT_CMD_MAX_LEN])
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], [])
-
-
-# _LT_HEADER_DLFCN
-# ----------------
-m4_defun([_LT_HEADER_DLFCN],
-[AC_CHECK_HEADERS([dlfcn.h], [], [], [AC_INCLUDES_DEFAULT])dnl
-])# _LT_HEADER_DLFCN
-
-
-# _LT_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE,
-#                      ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING)
-# ----------------------------------------------------------------
-m4_defun([_LT_TRY_DLOPEN_SELF],
-[m4_require([_LT_HEADER_DLFCN])dnl
-if test "$cross_compiling" = yes; then :
-  [$4]
-else
-  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
-  lt_status=$lt_dlunknown
-  cat > conftest.$ac_ext <<_LT_EOF
-[#line __oline__ "configure"
-#include "confdefs.h"
-
-#if HAVE_DLFCN_H
-#include <dlfcn.h>
-#endif
-
-#include <stdio.h>
-
-#ifdef RTLD_GLOBAL
-#  define LT_DLGLOBAL           RTLD_GLOBAL
-#else
-#  ifdef DL_GLOBAL
-#    define LT_DLGLOBAL         DL_GLOBAL
-#  else
-#    define LT_DLGLOBAL         0
-#  endif
-#endif
-
-/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
-   find out it does not work in some platform. */
-#ifndef LT_DLLAZY_OR_NOW
-#  ifdef RTLD_LAZY
-#    define LT_DLLAZY_OR_NOW            RTLD_LAZY
-#  else
-#    ifdef DL_LAZY
-#      define LT_DLLAZY_OR_NOW          DL_LAZY
-#    else
-#      ifdef RTLD_NOW
-#        define LT_DLLAZY_OR_NOW        RTLD_NOW
-#      else
-#        ifdef DL_NOW
-#          define LT_DLLAZY_OR_NOW      DL_NOW
-#        else
-#          define LT_DLLAZY_OR_NOW      0
-#        endif
-#      endif
-#    endif
-#  endif
-#endif
-
-void fnord() { int i=42;}
-int main ()
-{
-  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
-  int status = $lt_dlunknown;
-
-  if (self)
-    {
-      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
-      else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
-      /* dlclose (self); */
-    }
-  else
-    puts (dlerror ());
-
-  return status;
-}]
-_LT_EOF
-  if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then
-    (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null
-    lt_status=$?
-    case x$lt_status in
-      x$lt_dlno_uscore) $1 ;;
-      x$lt_dlneed_uscore) $2 ;;
-      x$lt_dlunknown|x*) $3 ;;
-    esac
-  else :
-    # compilation failed
-    $3
-  fi
-fi
-rm -fr conftest*
-])# _LT_TRY_DLOPEN_SELF
-
-
-# LT_SYS_DLOPEN_SELF
-# ------------------
-AC_DEFUN([LT_SYS_DLOPEN_SELF],
-[m4_require([_LT_HEADER_DLFCN])dnl
-if test "x$enable_dlopen" != xyes; then
-  enable_dlopen=unknown
-  enable_dlopen_self=unknown
-  enable_dlopen_self_static=unknown
-else
-  lt_cv_dlopen=no
-  lt_cv_dlopen_libs=
-
-  case $host_os in
-  beos*)
-    lt_cv_dlopen="load_add_on"
-    lt_cv_dlopen_libs=
-    lt_cv_dlopen_self=yes
-    ;;
-
-  mingw* | pw32* | cegcc*)
-    lt_cv_dlopen="LoadLibrary"
-    lt_cv_dlopen_libs=
-    ;;
-
-  cygwin*)
-    lt_cv_dlopen="dlopen"
-    lt_cv_dlopen_libs=
-    ;;
-
-  darwin*)
-  # if libdl is installed we need to link against it
-    AC_CHECK_LIB([dl], [dlopen],
-                [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[
-    lt_cv_dlopen="dyld"
-    lt_cv_dlopen_libs=
-    lt_cv_dlopen_self=yes
-    ])
-    ;;
-
-  *)
-    AC_CHECK_FUNC([shl_load],
-          [lt_cv_dlopen="shl_load"],
-      [AC_CHECK_LIB([dld], [shl_load],
-            [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"],
-        [AC_CHECK_FUNC([dlopen],
-              [lt_cv_dlopen="dlopen"],
-          [AC_CHECK_LIB([dl], [dlopen],
-                [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],
-            [AC_CHECK_LIB([svld], [dlopen],
-                  [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"],
-              [AC_CHECK_LIB([dld], [dld_link],
-                    [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"])
-              ])
-            ])
-          ])
-        ])
-      ])
-    ;;
-  esac
-
-  if test "x$lt_cv_dlopen" != xno; then
-    enable_dlopen=yes
-  else
-    enable_dlopen=no
-  fi
-
-  case $lt_cv_dlopen in
-  dlopen)
-    save_CPPFLAGS="$CPPFLAGS"
-    test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
-
-    save_LDFLAGS="$LDFLAGS"
-    wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
-
-    save_LIBS="$LIBS"
-    LIBS="$lt_cv_dlopen_libs $LIBS"
-
-    AC_CACHE_CHECK([whether a program can dlopen itself],
-          lt_cv_dlopen_self, [dnl
-          _LT_TRY_DLOPEN_SELF(
-            lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes,
-            lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross)
-    ])
-
-    if test "x$lt_cv_dlopen_self" = xyes; then
-      wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
-      AC_CACHE_CHECK([whether a statically linked program can dlopen itself],
-          lt_cv_dlopen_self_static, [dnl
-          _LT_TRY_DLOPEN_SELF(
-            lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes,
-            lt_cv_dlopen_self_static=no,  lt_cv_dlopen_self_static=cross)
-      ])
-    fi
-
-    CPPFLAGS="$save_CPPFLAGS"
-    LDFLAGS="$save_LDFLAGS"
-    LIBS="$save_LIBS"
-    ;;
-  esac
-
-  case $lt_cv_dlopen_self in
-  yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
-  *) enable_dlopen_self=unknown ;;
-  esac
-
-  case $lt_cv_dlopen_self_static in
-  yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
-  *) enable_dlopen_self_static=unknown ;;
-  esac
-fi
-_LT_DECL([dlopen_support], [enable_dlopen], [0],
-         [Whether dlopen is supported])
-_LT_DECL([dlopen_self], [enable_dlopen_self], [0],
-         [Whether dlopen of programs is supported])
-_LT_DECL([dlopen_self_static], [enable_dlopen_self_static], [0],
-         [Whether dlopen of statically linked programs is supported])
-])# LT_SYS_DLOPEN_SELF
-
-# Old name:
-AU_ALIAS([AC_LIBTOOL_DLOPEN_SELF], [LT_SYS_DLOPEN_SELF])
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], [])
-
-
-# _LT_COMPILER_C_O([TAGNAME])
-# ---------------------------
-# Check to see if options -c and -o are simultaneously supported by compiler.
-# This macro does not hard code the compiler like AC_PROG_CC_C_O.
-m4_defun([_LT_COMPILER_C_O],
-[m4_require([_LT_DECL_SED])dnl
-m4_require([_LT_FILEUTILS_DEFAULTS])dnl
-m4_require([_LT_TAG_COMPILER])dnl
-AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext],
-  [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)],
-  [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no
-   $RM -r conftest 2>/dev/null
-   mkdir conftest
-   cd conftest
-   mkdir out
-   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-
-   lt_compiler_flag="-o out/conftest2.$ac_objext"
-   # Insert the option either (1) after the last *FLAGS variable, or
-   # (2) before a word containing "conftest.", or (3) at the end.
-   # Note that $ac_compile itself does not contain backslashes and begins
-   # with a dollar sign (not a hyphen), so the echo should work correctly.
-   lt_compile=`echo "$ac_compile" | $SED \
-   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-   -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
-   -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
-   (eval "$lt_compile" 2>out/conftest.err)
-   ac_status=$?
-   cat out/conftest.err >&AS_MESSAGE_LOG_FD
-   echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
-   if (exit $ac_status) && test -s out/conftest2.$ac_objext
-   then
-     # The compiler can only warn and ignore the option if not recognized
-     # So say no if there are warnings
-     $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
-     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
-     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
-       _LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
-     fi
-   fi
-   chmod u+w . 2>&AS_MESSAGE_LOG_FD
-   $RM conftest*
-   # SGI C++ compiler will create directory out/ii_files/ for
-   # template instantiation
-   test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
-   $RM out/* && rmdir out
-   cd ..
-   $RM -r conftest
-   $RM conftest*
-])
-_LT_TAGDECL([compiler_c_o], [lt_cv_prog_compiler_c_o], [1],
-        [Does compiler simultaneously support -c and -o options?])
-])# _LT_COMPILER_C_O
-
-
-# _LT_COMPILER_FILE_LOCKS([TAGNAME])
-# ----------------------------------
-# Check to see if we can do hard links to lock some files if needed
-m4_defun([_LT_COMPILER_FILE_LOCKS],
-[m4_require([_LT_ENABLE_LOCK])dnl
-m4_require([_LT_FILEUTILS_DEFAULTS])dnl
-_LT_COMPILER_C_O([$1])
-
-hard_links="nottested"
-if test "$_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then
-  # do not overwrite the value of need_locks provided by the user
-  AC_MSG_CHECKING([if we can lock with hard links])
-  hard_links=yes
-  $RM conftest*
-  ln conftest.a conftest.b 2>/dev/null && hard_links=no
-  touch conftest.a
-  ln conftest.a conftest.b 2>&5 || hard_links=no
-  ln conftest.a conftest.b 2>/dev/null && hard_links=no
-  AC_MSG_RESULT([$hard_links])
-  if test "$hard_links" = no; then
-    AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe])
-    need_locks=warn
-  fi
-else
-  need_locks=no
-fi
-_LT_DECL([], [need_locks], [1], [Must we lock files when doing compilation?])
-])# _LT_COMPILER_FILE_LOCKS
-
-
-# _LT_CHECK_OBJDIR
-# ----------------
-m4_defun([_LT_CHECK_OBJDIR],
-[AC_CACHE_CHECK([for objdir], [lt_cv_objdir],
-[rm -f .libs 2>/dev/null
-mkdir .libs 2>/dev/null
-if test -d .libs; then
-  lt_cv_objdir=.libs
-else
-  # MS-DOS does not allow filenames that begin with a dot.
-  lt_cv_objdir=_libs
-fi
-rmdir .libs 2>/dev/null])
-objdir=$lt_cv_objdir
-_LT_DECL([], [objdir], [0],
-         [The name of the directory that contains temporary libtool files])dnl
-m4_pattern_allow([LT_OBJDIR])dnl
-AC_DEFINE_UNQUOTED(LT_OBJDIR, "$lt_cv_objdir/",
-  [Define to the sub-directory in which libtool stores uninstalled libraries.])
-])# _LT_CHECK_OBJDIR
-
-
-# _LT_LINKER_HARDCODE_LIBPATH([TAGNAME])
-# --------------------------------------
-# Check hardcoding attributes.
-m4_defun([_LT_LINKER_HARDCODE_LIBPATH],
-[AC_MSG_CHECKING([how to hardcode library paths into programs])
-_LT_TAGVAR(hardcode_action, $1)=
-if test -n "$_LT_TAGVAR(hardcode_libdir_flag_spec, $1)" ||
-   test -n "$_LT_TAGVAR(runpath_var, $1)" ||
-   test "X$_LT_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then
-
-  # We can hardcode non-existent directories.
-  if test "$_LT_TAGVAR(hardcode_direct, $1)" != no &&
-     # If the only mechanism to avoid hardcoding is shlibpath_var, we
-     # have to relink, otherwise we might link with an installed library
-     # when we should be linking with a yet-to-be-installed one
-     ## test "$_LT_TAGVAR(hardcode_shlibpath_var, $1)" != no &&
-     test "$_LT_TAGVAR(hardcode_minus_L, $1)" != no; then
-    # Linking always hardcodes the temporary library directory.
-    _LT_TAGVAR(hardcode_action, $1)=relink
-  else
-    # We can link without hardcoding, and we can hardcode nonexisting dirs.
-    _LT_TAGVAR(hardcode_action, $1)=immediate
-  fi
-else
-  # We cannot hardcode anything, or else we can only hardcode existing
-  # directories.
-  _LT_TAGVAR(hardcode_action, $1)=unsupported
-fi
-AC_MSG_RESULT([$_LT_TAGVAR(hardcode_action, $1)])
-
-if test "$_LT_TAGVAR(hardcode_action, $1)" = relink ||
-   test "$_LT_TAGVAR(inherit_rpath, $1)" = yes; then
-  # Fast installation is not supported
-  enable_fast_install=no
-elif test "$shlibpath_overrides_runpath" = yes ||
-     test "$enable_shared" = no; then
-  # Fast installation is not necessary
-  enable_fast_install=needless
-fi
-_LT_TAGDECL([], [hardcode_action], [0],
-    [How to hardcode a shared library path into an executable])
-])# _LT_LINKER_HARDCODE_LIBPATH
-
-
-# _LT_CMD_STRIPLIB
-# ----------------
-m4_defun([_LT_CMD_STRIPLIB],
-[m4_require([_LT_DECL_EGREP])
-striplib=
-old_striplib=
-AC_MSG_CHECKING([whether stripping libraries is possible])
-if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then
-  test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
-  test -z "$striplib" && striplib="$STRIP --strip-unneeded"
-  AC_MSG_RESULT([yes])
-else
-# FIXME - insert some real tests, host_os isn't really good enough
-  case $host_os in
-  darwin*)
-    if test -n "$STRIP" ; then
-      striplib="$STRIP -x"
-      old_striplib="$STRIP -S"
-      AC_MSG_RESULT([yes])
-    else
-      AC_MSG_RESULT([no])
-    fi
-    ;;
-  *)
-    AC_MSG_RESULT([no])
-    ;;
-  esac
-fi
-_LT_DECL([], [old_striplib], [1], [Commands to strip libraries])
-_LT_DECL([], [striplib], [1])
-])# _LT_CMD_STRIPLIB
-
-
-# _LT_SYS_DYNAMIC_LINKER([TAG])
-# -----------------------------
-# PORTME Fill in your ld.so characteristics
-m4_defun([_LT_SYS_DYNAMIC_LINKER],
-[AC_REQUIRE([AC_CANONICAL_HOST])dnl
-m4_require([_LT_DECL_EGREP])dnl
-m4_require([_LT_FILEUTILS_DEFAULTS])dnl
-m4_require([_LT_DECL_OBJDUMP])dnl
-m4_require([_LT_DECL_SED])dnl
-AC_MSG_CHECKING([dynamic linker characteristics])
-m4_if([$1],
-        [], [
-if test "$GCC" = yes; then
-  case $host_os in
-    darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
-    *) lt_awk_arg="/^libraries:/" ;;
-  esac
-  lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-  if $ECHO "$lt_search_path_spec" | $GREP ';' >/dev/null ; then
-    # if the path contains ";" then we assume it to be the separator
-    # otherwise default to the standard path separator (i.e. ":") - it is
-    # assumed that no part of a normal pathname contains ";" but that should
-    # okay in the real world where ";" in dirpaths is itself problematic.
-    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e 's/;/ /g'`
-  else
-    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
-  fi
-  # Ok, now we have the path, separated by spaces, we can step through it
-  # and add multilib dir if necessary.
-  lt_tmp_lt_search_path_spec=
-  lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
-  for lt_sys_path in $lt_search_path_spec; do
-    if test -d "$lt_sys_path/$lt_multi_os_dir"; then
-      lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir"
-    else
-      test -d "$lt_sys_path" && \
-        lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
-    fi
-  done
-  lt_search_path_spec=`$ECHO $lt_tmp_lt_search_path_spec | awk '
-BEGIN {RS=" "; FS="/|\n";} {
-  lt_foo="";
-  lt_count=0;
-  for (lt_i = NF; lt_i > 0; lt_i--) {
-    if ($lt_i != "" && $lt_i != ".") {
-      if ($lt_i == "..") {
-        lt_count++;
-      } else {
-        if (lt_count == 0) {
-          lt_foo="/" $lt_i lt_foo;
-        } else {
-          lt_count--;
-        }
-      }
-    }
-  }
-  if (lt_foo != "") { lt_freq[[lt_foo]]++; }
-  if (lt_freq[[lt_foo]] == 1) { print lt_foo; }
-}'`
-  sys_lib_search_path_spec=`$ECHO $lt_search_path_spec`
-else
-  sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
-fi])
-library_names_spec=
-libname_spec='lib$name'
-soname_spec=
-shrext_cmds=".so"
-postinstall_cmds=
-postuninstall_cmds=
-finish_cmds=
-finish_eval=
-shlibpath_var=
-shlibpath_overrides_runpath=unknown
-version_type=none
-dynamic_linker="$host_os ld.so"
-sys_lib_dlsearch_path_spec="/lib /usr/lib"
-need_lib_prefix=unknown
-hardcode_into_libs=no
-
-# when you set need_version to no, make sure it does not cause -set_version
-# flags to be left without arguments
-need_version=unknown
-
-case $host_os in
-aix3*)
-  version_type=linux
-  library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
-  shlibpath_var=LIBPATH
-
-  # AIX 3 has no versioning support, so we append a major version to the name.
-  soname_spec='${libname}${release}${shared_ext}$major'
-  ;;
-
-aix[[4-9]]*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  hardcode_into_libs=yes
-  if test "$host_cpu" = ia64; then
-    # AIX 5 supports IA64
-    library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
-    shlibpath_var=LD_LIBRARY_PATH
-  else
-    # With GCC up to 2.95.x, collect2 would create an import file
-    # for dependence libraries.  The import file would start with
-    # the line `#! .'.  This would cause the generated library to
-    # depend on `.', always an invalid library.  This was fixed in
-    # development snapshots of GCC prior to 3.0.
-    case $host_os in
-      aix4 | aix4.[[01]] | aix4.[[01]].*)
-      if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
-           echo ' yes '
-           echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then
-        :
-      else
-        can_build_shared=no
-      fi
-      ;;
-    esac
-    # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
-    # soname into executable. Probably we can add versioning support to
-    # collect2, so additional links can be useful in future.
-    if test "$aix_use_runtimelinking" = yes; then
-      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
-      # instead of lib<name>.a to let people know that these are not
-      # typical AIX shared libraries.
-      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    else
-      # We preserve .a as extension for shared libraries through AIX4.2
-      # and later when we are not doing run time linking.
-      library_names_spec='${libname}${release}.a $libname.a'
-      soname_spec='${libname}${release}${shared_ext}$major'
-    fi
-    shlibpath_var=LIBPATH
-  fi
-  ;;
-
-amigaos*)
-  case $host_cpu in
-  powerpc)
-    # Since July 2007 AmigaOS4 officially supports .so libraries.
-    # When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    ;;
-  m68k)
-    library_names_spec='$libname.ixlibrary $libname.a'
-    # Create ${libname}_ixlibrary.a entries in /sys/libs.
-    finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$ECHO "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
-    ;;
-  esac
-  ;;
-
-beos*)
-  library_names_spec='${libname}${shared_ext}'
-  dynamic_linker="$host_os ld.so"
-  shlibpath_var=LIBRARY_PATH
-  ;;
-
-bsdi[[45]]*)
-  version_type=linux
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
-  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
-  # the default ld.so.conf also contains /usr/contrib/lib and
-  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
-  # libtool to hard-code these into programs
-  ;;
-
-cygwin* | mingw* | pw32* | cegcc*)
-  version_type=windows
-  shrext_cmds=".dll"
-  need_version=no
-  need_lib_prefix=no
-
-  case $GCC,$host_os in
-  yes,cygwin* | yes,mingw* | yes,pw32* | yes,cegcc*)
-    library_names_spec='$libname.dll.a'
-    # DLL is installed to $(libdir)/../bin by postinstall_cmds
-    postinstall_cmds='base_file=`basename \${file}`~
-      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
-      dldir=$destdir/`dirname \$dlpath`~
-      test -d \$dldir || mkdir -p \$dldir~
-      $install_prog $dir/$dlname \$dldir/$dlname~
-      chmod a+x \$dldir/$dlname~
-      if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
-        eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
-      fi'
-    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
-      dlpath=$dir/\$dldll~
-       $RM \$dlpath'
-    shlibpath_overrides_runpath=yes
-
-    case $host_os in
-    cygwin*)
-      # Cygwin DLLs use 'cyg' prefix rather than 'lib'
-      soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
-      sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
-      ;;
-    mingw* | cegcc*)
-      # MinGW DLLs use traditional 'lib' prefix
-      soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
-      sys_lib_search_path_spec=`$CC -print-search-dirs | $GREP "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-      if $ECHO "$sys_lib_search_path_spec" | [$GREP ';[c-zC-Z]:/' >/dev/null]; then
-        # It is most probably a Windows format PATH printed by
-        # mingw gcc, but we are running on Cygwin. Gcc prints its search
-        # path with ; separators, and with drive letters. We can handle the
-        # drive letters (cygwin fileutils understands them), so leave them,
-        # especially as we might pass files found there to a mingw objdump,
-        # which wouldn't understand a cygwinified path. Ahh.
-        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
-      else
-        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
-      fi
-      ;;
-    pw32*)
-      # pw32 DLLs use 'pw' prefix rather than 'lib'
-      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
-      ;;
-    esac
-    ;;
-
-  *)
-    library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib'
-    ;;
-  esac
-  dynamic_linker='Win32 ld.exe'
-  # FIXME: first we should search . and the directory the executable is in
-  shlibpath_var=PATH
-  ;;
-
-darwin* | rhapsody*)
-  dynamic_linker="$host_os dyld"
-  version_type=darwin
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext'
-  soname_spec='${libname}${release}${major}$shared_ext'
-  shlibpath_overrides_runpath=yes
-  shlibpath_var=DYLD_LIBRARY_PATH
-  shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
-m4_if([$1], [],[
-  sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"])
-  sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
-  ;;
-
-dgux*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  ;;
-
-freebsd1*)
-  dynamic_linker=no
-  ;;
-
-freebsd* | dragonfly*)
-  # DragonFly does not have aout.  When/if they implement a new
-  # versioning mechanism, adjust this.
-  if test -x /usr/bin/objformat; then
-    objformat=`/usr/bin/objformat`
-  else
-    case $host_os in
-    freebsd[[123]]*) objformat=aout ;;
-    *) objformat=elf ;;
-    esac
-  fi
-  version_type=freebsd-$objformat
-  case $version_type in
-    freebsd-elf*)
-      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
-      need_version=no
-      need_lib_prefix=no
-      ;;
-    freebsd-*)
-      library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
-      need_version=yes
-      ;;
-  esac
-  shlibpath_var=LD_LIBRARY_PATH
-  case $host_os in
-  freebsd2*)
-    shlibpath_overrides_runpath=yes
-    ;;
-  freebsd3.[[01]]* | freebsdelf3.[[01]]*)
-    shlibpath_overrides_runpath=yes
-    hardcode_into_libs=yes
-    ;;
-  freebsd3.[[2-9]]* | freebsdelf3.[[2-9]]* | \
-  freebsd4.[[0-5]] | freebsdelf4.[[0-5]] | freebsd4.1.1 | freebsdelf4.1.1)
-    shlibpath_overrides_runpath=no
-    hardcode_into_libs=yes
-    ;;
-  *) # from 4.6 on, and DragonFly
-    shlibpath_overrides_runpath=yes
-    hardcode_into_libs=yes
-    ;;
-  esac
-  ;;
-
-gnu*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  hardcode_into_libs=yes
-  ;;
-
-hpux9* | hpux10* | hpux11*)
-  # Give a soname corresponding to the major version so that dld.sl refuses to
-  # link against other versions.
-  version_type=sunos
-  need_lib_prefix=no
-  need_version=no
-  case $host_cpu in
-  ia64*)
-    shrext_cmds='.so'
-    hardcode_into_libs=yes
-    dynamic_linker="$host_os dld.so"
-    shlibpath_var=LD_LIBRARY_PATH
-    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
-    if test "X$HPUX_IA64_MODE" = X32; then
-      sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
-    else
-      sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
-    fi
-    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-    ;;
-  hppa*64*)
-    shrext_cmds='.sl'
-    hardcode_into_libs=yes
-    dynamic_linker="$host_os dld.sl"
-    shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
-    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
-    sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
-    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-    ;;
-  *)
-    shrext_cmds='.sl'
-    dynamic_linker="$host_os dld.sl"
-    shlibpath_var=SHLIB_PATH
-    shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
-    ;;
-  esac
-  # HP-UX runs *really* slowly unless shared libraries are mode 555.
-  postinstall_cmds='chmod 555 $lib'
-  ;;
-
-interix[[3-9]]*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=no
-  hardcode_into_libs=yes
-  ;;
-
-irix5* | irix6* | nonstopux*)
-  case $host_os in
-    nonstopux*) version_type=nonstopux ;;
-    *)
-        if test "$lt_cv_prog_gnu_ld" = yes; then
-                version_type=linux
-        else
-                version_type=irix
-        fi ;;
-  esac
-  need_lib_prefix=no
-  need_version=no
-  soname_spec='${libname}${release}${shared_ext}$major'
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
-  case $host_os in
-  irix5* | nonstopux*)
-    libsuff= shlibsuff=
-    ;;
-  *)
-    case $LD in # libtool.m4 will add one of these switches to LD
-    *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
-      libsuff= shlibsuff= libmagic=32-bit;;
-    *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
-      libsuff=32 shlibsuff=N32 libmagic=N32;;
-    *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
-      libsuff=64 shlibsuff=64 libmagic=64-bit;;
-    *) libsuff= shlibsuff= libmagic=never-match;;
-    esac
-    ;;
-  esac
-  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
-  shlibpath_overrides_runpath=no
-  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
-  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
-  hardcode_into_libs=yes
-  ;;
-
-# No shared lib support for Linux oldld, aout, or coff.
-linux*oldld* | linux*aout* | linux*coff*)
-  dynamic_linker=no
-  ;;
-
-# This must be Linux ELF.
-linux* | k*bsd*-gnu | kopensolaris*-gnu)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=no
-  # Some binutils ld are patched to set DT_RUNPATH
-  save_LDFLAGS=$LDFLAGS
-  save_libdir=$libdir
-  eval "libdir=/foo; wl=\"$_LT_TAGVAR(lt_prog_compiler_wl, $1)\"; \
-       LDFLAGS=\"\$LDFLAGS $_LT_TAGVAR(hardcode_libdir_flag_spec, $1)\""
-  AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
-    [AS_IF([ ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null],
-       [shlibpath_overrides_runpath=yes])])
-  LDFLAGS=$save_LDFLAGS
-  libdir=$save_libdir
-
-  # This implies no fast_install, which is unacceptable.
-  # Some rework will be needed to allow for fast_install
-  # before this can be enabled.
-  hardcode_into_libs=yes
-
-  # Append ld.so.conf contents to the search path
-  if test -f /etc/ld.so.conf; then
-    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[   ]*hwcap[        ]/d;s/[:,      ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
-    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
-  fi
-
-  # We used to test for /lib/ld.so.1 and disable shared libraries on
-  # powerpc, because MkLinux only supported shared libraries with the
-  # GNU dynamic linker.  Since this was broken with cross compilers,
-  # most powerpc-linux boxes support dynamic linking these days and
-  # people can always --disable-shared, the test was removed, and we
-  # assume the GNU/Linux dynamic linker is in use.
-  dynamic_linker='GNU/Linux ld.so'
-  ;;
-
-netbsdelf*-gnu)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=no
-  hardcode_into_libs=yes
-  dynamic_linker='NetBSD ld.elf_so'
-  ;;
-
-netbsd*)
-  version_type=sunos
-  need_lib_prefix=no
-  need_version=no
-  if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-    dynamic_linker='NetBSD (a.out) ld.so'
-  else
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
-    dynamic_linker='NetBSD ld.elf_so'
-  fi
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  hardcode_into_libs=yes
-  ;;
-
-newsos6)
-  version_type=linux
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  ;;
-
-*nto* | *qnx*)
-  version_type=qnx
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=no
-  hardcode_into_libs=yes
-  dynamic_linker='ldqnx.so'
-  ;;
-
-openbsd*)
-  version_type=sunos
-  sys_lib_dlsearch_path_spec="/usr/lib"
-  need_lib_prefix=no
-  # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
-  case $host_os in
-    openbsd3.3 | openbsd3.3.*)  need_version=yes ;;
-    *)                          need_version=no  ;;
-  esac
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-    case $host_os in
-      openbsd2.[[89]] | openbsd2.[[89]].*)
-        shlibpath_overrides_runpath=no
-        ;;
-      *)
-        shlibpath_overrides_runpath=yes
-        ;;
-      esac
-  else
-    shlibpath_overrides_runpath=yes
-  fi
-  ;;
-
-os2*)
-  libname_spec='$name'
-  shrext_cmds=".dll"
-  need_lib_prefix=no
-  library_names_spec='$libname${shared_ext} $libname.a'
-  dynamic_linker='OS/2 ld.exe'
-  shlibpath_var=LIBPATH
-  ;;
-
-osf3* | osf4* | osf5*)
-  version_type=osf
-  need_lib_prefix=no
-  need_version=no
-  soname_spec='${libname}${release}${shared_ext}$major'
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  shlibpath_var=LD_LIBRARY_PATH
-  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
-  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
-  ;;
-
-rdos*)
-  dynamic_linker=no
-  ;;
-
-solaris*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  hardcode_into_libs=yes
-  # ldd complains unless libraries are executable
-  postinstall_cmds='chmod +x $lib'
-  ;;
-
-sunos4*)
-  version_type=sunos
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  if test "$with_gnu_ld" = yes; then
-    need_lib_prefix=no
-  fi
-  need_version=yes
-  ;;
-
-sysv4 | sysv4.3*)
-  version_type=linux
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  case $host_vendor in
-    sni)
-      shlibpath_overrides_runpath=no
-      need_lib_prefix=no
-      runpath_var=LD_RUN_PATH
-      ;;
-    siemens)
-      need_lib_prefix=no
-      ;;
-    motorola)
-      need_lib_prefix=no
-      need_version=no
-      shlibpath_overrides_runpath=no
-      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
-      ;;
-  esac
-  ;;
-
-sysv4*MP*)
-  if test -d /usr/nec ;then
-    version_type=linux
-    library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
-    soname_spec='$libname${shared_ext}.$major'
-    shlibpath_var=LD_LIBRARY_PATH
-  fi
-  ;;
-
-sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
-  version_type=freebsd-elf
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  hardcode_into_libs=yes
-  if test "$with_gnu_ld" = yes; then
-    sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
-  else
-    sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
-    case $host_os in
-      sco3.2v5*)
-        sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
-        ;;
-    esac
-  fi
-  sys_lib_dlsearch_path_spec='/usr/lib'
-  ;;
-
-tpf*)
-  # TPF is a cross-target only.  Preferred cross-host = GNU/Linux.
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=no
-  hardcode_into_libs=yes
-  ;;
-
-uts4*)
-  version_type=linux
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  ;;
-
-*)
-  dynamic_linker=no
-  ;;
-esac
-AC_MSG_RESULT([$dynamic_linker])
-test "$dynamic_linker" = no && can_build_shared=no
-
-variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
-if test "$GCC" = yes; then
-  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
-fi
-
-if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
-  sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
-fi
-if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
-  sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
-fi
-
-_LT_DECL([], [variables_saved_for_relink], [1],
-    [Variables whose values should be saved in libtool wrapper scripts and
-    restored at link time])
-_LT_DECL([], [need_lib_prefix], [0],
-    [Do we need the "lib" prefix for modules?])
-_LT_DECL([], [need_version], [0], [Do we need a version for libraries?])
-_LT_DECL([], [version_type], [0], [Library versioning type])
-_LT_DECL([], [runpath_var], [0],  [Shared library runtime path variable])
-_LT_DECL([], [shlibpath_var], [0],[Shared library path variable])
-_LT_DECL([], [shlibpath_overrides_runpath], [0],
-    [Is shlibpath searched before the hard-coded library search path?])
-_LT_DECL([], [libname_spec], [1], [Format of library name prefix])
-_LT_DECL([], [library_names_spec], [1],
-    [[List of archive names.  First name is the real one, the rest are links.
-    The last name is the one that the linker finds with -lNAME]])
-_LT_DECL([], [soname_spec], [1],
-    [[The coded name of the library, if different from the real name]])
-_LT_DECL([], [postinstall_cmds], [2],
-    [Command to use after installation of a shared archive])
-_LT_DECL([], [postuninstall_cmds], [2],
-    [Command to use after uninstallation of a shared archive])
-_LT_DECL([], [finish_cmds], [2],
-    [Commands used to finish a libtool library installation in a directory])
-_LT_DECL([], [finish_eval], [1],
-    [[As "finish_cmds", except a single script fragment to be evaled but
-    not shown]])
-_LT_DECL([], [hardcode_into_libs], [0],
-    [Whether we should hardcode library paths into libraries])
-_LT_DECL([], [sys_lib_search_path_spec], [2],
-    [Compile-time system search path for libraries])
-_LT_DECL([], [sys_lib_dlsearch_path_spec], [2],
-    [Run-time system search path for libraries])
-])# _LT_SYS_DYNAMIC_LINKER
-
-
-# _LT_PATH_TOOL_PREFIX(TOOL)
-# --------------------------
-# find a file program which can recognize shared library
-AC_DEFUN([_LT_PATH_TOOL_PREFIX],
-[m4_require([_LT_DECL_EGREP])dnl
-AC_MSG_CHECKING([for $1])
-AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
-[case $MAGIC_CMD in
-[[\\/*] |  ?:[\\/]*])
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
-  ;;
-*)
-  lt_save_MAGIC_CMD="$MAGIC_CMD"
-  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-dnl $ac_dummy forces splitting on constant user-supplied paths.
-dnl POSIX.2 word splitting is done only on the output of word expansions,
-dnl not every word.  This closes a longstanding sh security hole.
-  ac_dummy="m4_if([$2], , $PATH, [$2])"
-  for ac_dir in $ac_dummy; do
-    IFS="$lt_save_ifs"
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$1; then
-      lt_cv_path_MAGIC_CMD="$ac_dir/$1"
-      if test -n "$file_magic_test_file"; then
-        case $deplibs_check_method in
-        "file_magic "*)
-          file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
-          MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-          if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
-            $EGREP "$file_magic_regex" > /dev/null; then
-            :
-          else
-            cat <<_LT_EOF 1>&2
-
-*** Warning: the command libtool uses to detect shared libraries,
-*** $file_magic_cmd, produces output that libtool cannot recognize.
-*** The result is that libtool may fail to recognize shared libraries
-*** as such.  This will affect the creation of libtool libraries that
-*** depend on shared libraries, but programs linked with such libtool
-*** libraries will work regardless of this problem.  Nevertheless, you
-*** may want to report the problem to your system manager and/or to
-*** bug-libtool@gnu.org
-
-_LT_EOF
-          fi ;;
-        esac
-      fi
-      break
-    fi
-  done
-  IFS="$lt_save_ifs"
-  MAGIC_CMD="$lt_save_MAGIC_CMD"
-  ;;
-esac])
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-if test -n "$MAGIC_CMD"; then
-  AC_MSG_RESULT($MAGIC_CMD)
-else
-  AC_MSG_RESULT(no)
-fi
-_LT_DECL([], [MAGIC_CMD], [0],
-         [Used to examine libraries when file_magic_cmd begins with "file"])dnl
-])# _LT_PATH_TOOL_PREFIX
-
-# Old name:
-AU_ALIAS([AC_PATH_TOOL_PREFIX], [_LT_PATH_TOOL_PREFIX])
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AC_PATH_TOOL_PREFIX], [])
-
-
-# _LT_PATH_MAGIC
-# --------------
-# find a file program which can recognize a shared library
-m4_defun([_LT_PATH_MAGIC],
-[_LT_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH)
-if test -z "$lt_cv_path_MAGIC_CMD"; then
-  if test -n "$ac_tool_prefix"; then
-    _LT_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH)
-  else
-    MAGIC_CMD=:
-  fi
-fi
-])# _LT_PATH_MAGIC
-
-
-# LT_PATH_LD
-# ----------
-# find the pathname to the GNU or non-GNU linker
-AC_DEFUN([LT_PATH_LD],
-[AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_CANONICAL_BUILD])dnl
-m4_require([_LT_DECL_SED])dnl
-m4_require([_LT_DECL_EGREP])dnl
-
-AC_ARG_WITH([gnu-ld],
-    [AS_HELP_STRING([--with-gnu-ld],
-        [assume the C compiler uses GNU ld @<:@default=no@:>@])],
-    [test "$withval" = no || with_gnu_ld=yes],
-    [with_gnu_ld=no])dnl
-
-ac_prog=ld
-if test "$GCC" = yes; then
-  # Check if gcc -print-prog-name=ld gives a path.
-  AC_MSG_CHECKING([for ld used by $CC])
-  case $host in
-  *-*-mingw*)
-    # gcc leaves a trailing carriage return which upsets mingw
-    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
-  *)
-    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
-  esac
-  case $ac_prog in
-    # Accept absolute paths.
-    [[\\/]]* | ?:[[\\/]]*)
-      re_direlt='/[[^/]][[^/]]*/\.\./'
-      # Canonicalize the pathname of ld
-      ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'`
-      while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
-        ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
-      done
-      test -z "$LD" && LD="$ac_prog"
-      ;;
-  "")
-    # If it fails, then pretend we aren't using GCC.
-    ac_prog=ld
-    ;;
-  *)
-    # If it is relative, then search for the first ld in PATH.
-    with_gnu_ld=unknown
-    ;;
-  esac
-elif test "$with_gnu_ld" = yes; then
-  AC_MSG_CHECKING([for GNU ld])
-else
-  AC_MSG_CHECKING([for non-GNU ld])
-fi
-AC_CACHE_VAL(lt_cv_path_LD,
-[if test -z "$LD"; then
-  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-  for ac_dir in $PATH; do
-    IFS="$lt_save_ifs"
-    test -z "$ac_dir" && ac_dir=.
-    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
-      lt_cv_path_LD="$ac_dir/$ac_prog"
-      # Check to see if the program is GNU ld.  I'd rather use --version,
-      # but apparently some variants of GNU ld only accept -v.
-      # Break only if it was the GNU/non-GNU ld that we prefer.
-      case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
-      *GNU* | *'with BFD'*)
-        test "$with_gnu_ld" != no && break
-        ;;
-      *)
-        test "$with_gnu_ld" != yes && break
-        ;;
-      esac
-    fi
-  done
-  IFS="$lt_save_ifs"
-else
-  lt_cv_path_LD="$LD" # Let the user override the test with a path.
-fi])
-LD="$lt_cv_path_LD"
-if test -n "$LD"; then
-  AC_MSG_RESULT($LD)
-else
-  AC_MSG_RESULT(no)
-fi
-test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
-_LT_PATH_LD_GNU
-AC_SUBST([LD])
-
-_LT_TAGDECL([], [LD], [1], [The linker used to build libraries])
-])# LT_PATH_LD
-
-# Old names:
-AU_ALIAS([AM_PROG_LD], [LT_PATH_LD])
-AU_ALIAS([AC_PROG_LD], [LT_PATH_LD])
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AM_PROG_LD], [])
-dnl AC_DEFUN([AC_PROG_LD], [])
-
-
-# _LT_PATH_LD_GNU
-#- --------------
-m4_defun([_LT_PATH_LD_GNU],
-[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
-[# I'd rather use --version here, but apparently some GNU lds only accept -v.
-case `$LD -v 2>&1 </dev/null` in
-*GNU* | *'with BFD'*)
-  lt_cv_prog_gnu_ld=yes
-  ;;
-*)
-  lt_cv_prog_gnu_ld=no
-  ;;
-esac])
-with_gnu_ld=$lt_cv_prog_gnu_ld
-])# _LT_PATH_LD_GNU
-
-
-# _LT_CMD_RELOAD
-# --------------
-# find reload flag for linker
-#   -- PORTME Some linkers may need a different reload flag.
-m4_defun([_LT_CMD_RELOAD],
-[AC_CACHE_CHECK([for $LD option to reload object files],
-  lt_cv_ld_reload_flag,
-  [lt_cv_ld_reload_flag='-r'])
-reload_flag=$lt_cv_ld_reload_flag
-case $reload_flag in
-"" | " "*) ;;
-*) reload_flag=" $reload_flag" ;;
-esac
-reload_cmds='$LD$reload_flag -o $output$reload_objs'
-case $host_os in
-  darwin*)
-    if test "$GCC" = yes; then
-      reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
-    else
-      reload_cmds='$LD$reload_flag -o $output$reload_objs'
-    fi
-    ;;
-esac
-_LT_DECL([], [reload_flag], [1], [How to create reloadable object files])dnl
-_LT_DECL([], [reload_cmds], [2])dnl
-])# _LT_CMD_RELOAD
-
-
-# _LT_CHECK_MAGIC_METHOD
-# ----------------------
-# how to check for library dependencies
-#  -- PORTME fill in with the dynamic library characteristics
-m4_defun([_LT_CHECK_MAGIC_METHOD],
-[m4_require([_LT_DECL_EGREP])
-m4_require([_LT_DECL_OBJDUMP])
-AC_CACHE_CHECK([how to recognize dependent libraries],
-lt_cv_deplibs_check_method,
-[lt_cv_file_magic_cmd='$MAGIC_CMD'
-lt_cv_file_magic_test_file=
-lt_cv_deplibs_check_method='unknown'
-# Need to set the preceding variable on all platforms that support
-# interlibrary dependencies.
-# 'none' -- dependencies not supported.
-# `unknown' -- same as none, but documents that we really don't know.
-# 'pass_all' -- all dependencies passed with no checks.
-# 'test_compile' -- check by making test program.
-# 'file_magic [[regex]]' -- check by looking for files in library path
-# which responds to the $file_magic_cmd with a given extended regex.
-# If you have `file' or equivalent on your system and you're not sure
-# whether `pass_all' will *always* work, you probably want this one.
-
-case $host_os in
-aix[[4-9]]*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-beos*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-bsdi[[45]]*)
-  lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)'
-  lt_cv_file_magic_cmd='/usr/bin/file -L'
-  lt_cv_file_magic_test_file=/shlib/libc.so
-  ;;
-
-cygwin*)
-  # func_win32_libid is a shell function defined in ltmain.sh
-  lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
-  lt_cv_file_magic_cmd='func_win32_libid'
-  ;;
-
-mingw* | pw32*)
-  # Base MSYS/MinGW do not provide the 'file' command needed by
-  # func_win32_libid shell function, so use a weaker test based on 'objdump',
-  # unless we find 'file', for example because we are cross-compiling.
-  if ( file / ) >/dev/null 2>&1; then
-    lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
-    lt_cv_file_magic_cmd='func_win32_libid'
-  else
-    lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
-    lt_cv_file_magic_cmd='$OBJDUMP -f'
-  fi
-  ;;
-
-cegcc)
-  # use the weaker test based on 'objdump'. See mingw*.
-  lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?'
-  lt_cv_file_magic_cmd='$OBJDUMP -f'
-  ;;
-
-darwin* | rhapsody*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-freebsd* | dragonfly*)
-  if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
-    case $host_cpu in
-    i*86 )
-      # Not sure whether the presence of OpenBSD here was a mistake.
-      # Let's accept both of them until this is cleared up.
-      lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[[3-9]]86 (compact )?demand paged shared library'
-      lt_cv_file_magic_cmd=/usr/bin/file
-      lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
-      ;;
-    esac
-  else
-    lt_cv_deplibs_check_method=pass_all
-  fi
-  ;;
-
-gnu*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-hpux10.20* | hpux11*)
-  lt_cv_file_magic_cmd=/usr/bin/file
-  case $host_cpu in
-  ia64*)
-    lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64'
-    lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
-    ;;
-  hppa*64*)
-    [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]']
-    lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
-    ;;
-  *)
-    lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library'
-    lt_cv_file_magic_test_file=/usr/lib/libc.sl
-    ;;
-  esac
-  ;;
-
-interix[[3-9]]*)
-  # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
-  lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|\.a)$'
-  ;;
-
-irix5* | irix6* | nonstopux*)
-  case $LD in
-  *-32|*"-32 ") libmagic=32-bit;;
-  *-n32|*"-n32 ") libmagic=N32;;
-  *-64|*"-64 ") libmagic=64-bit;;
-  *) libmagic=never-match;;
-  esac
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-# This must be Linux ELF.
-linux* | k*bsd*-gnu | kopensolaris*-gnu)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-netbsd* | netbsdelf*-gnu)
-  if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
-    lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
-  else
-    lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$'
-  fi
-  ;;
-
-newos6*)
-  lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)'
-  lt_cv_file_magic_cmd=/usr/bin/file
-  lt_cv_file_magic_test_file=/usr/lib/libnls.so
-  ;;
-
-*nto* | *qnx*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-openbsd*)
-  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-    lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$'
-  else
-    lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
-  fi
-  ;;
-
-osf3* | osf4* | osf5*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-rdos*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-solaris*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-sysv4 | sysv4.3*)
-  case $host_vendor in
-  motorola)
-    lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]'
-    lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
-    ;;
-  ncr)
-    lt_cv_deplibs_check_method=pass_all
-    ;;
-  sequent)
-    lt_cv_file_magic_cmd='/bin/file'
-    lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )'
-    ;;
-  sni)
-    lt_cv_file_magic_cmd='/bin/file'
-    lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib"
-    lt_cv_file_magic_test_file=/lib/libc.so
-    ;;
-  siemens)
-    lt_cv_deplibs_check_method=pass_all
-    ;;
-  pc)
-    lt_cv_deplibs_check_method=pass_all
-    ;;
-  esac
-  ;;
-
-tpf*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-esac
-])
-file_magic_cmd=$lt_cv_file_magic_cmd
-deplibs_check_method=$lt_cv_deplibs_check_method
-test -z "$deplibs_check_method" && deplibs_check_method=unknown
-
-_LT_DECL([], [deplibs_check_method], [1],
-    [Method to check whether dependent libraries are shared objects])
-_LT_DECL([], [file_magic_cmd], [1],
-    [Command to use when deplibs_check_method == "file_magic"])
-])# _LT_CHECK_MAGIC_METHOD
-
-
-# LT_PATH_NM
-# ----------
-# find the pathname to a BSD- or MS-compatible name lister
-AC_DEFUN([LT_PATH_NM],
-[AC_REQUIRE([AC_PROG_CC])dnl
-AC_CACHE_CHECK([for BSD- or MS-compatible name lister (nm)], lt_cv_path_NM,
-[if test -n "$NM"; then
-  # Let the user override the test.
-  lt_cv_path_NM="$NM"
-else
-  lt_nm_to_check="${ac_tool_prefix}nm"
-  if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
-    lt_nm_to_check="$lt_nm_to_check nm"
-  fi
-  for lt_tmp_nm in $lt_nm_to_check; do
-    lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-    for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
-      IFS="$lt_save_ifs"
-      test -z "$ac_dir" && ac_dir=.
-      tmp_nm="$ac_dir/$lt_tmp_nm"
-      if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
-        # Check to see if the nm accepts a BSD-compat flag.
-        # Adding the `sed 1q' prevents false positives on HP-UX, which says:
-        #   nm: unknown option "B" ignored
-        # Tru64's nm complains that /dev/null is an invalid object file
-        case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
-        */dev/null* | *'Invalid file or object type'*)
-          lt_cv_path_NM="$tmp_nm -B"
-          break
-          ;;
-        *)
-          case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
-          */dev/null*)
-            lt_cv_path_NM="$tmp_nm -p"
-            break
-            ;;
-          *)
-            lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
-            continue # so that we can try to find one that supports BSD flags
-            ;;
-          esac
-          ;;
-        esac
-      fi
-    done
-    IFS="$lt_save_ifs"
-  done
-  : ${lt_cv_path_NM=no}
-fi])
-if test "$lt_cv_path_NM" != "no"; then
-  NM="$lt_cv_path_NM"
-else
-  # Didn't find any BSD compatible name lister, look for dumpbin.
-  AC_CHECK_TOOLS(DUMPBIN, ["dumpbin -symbols" "link -dump -symbols"], :)
-  AC_SUBST([DUMPBIN])
-  if test "$DUMPBIN" != ":"; then
-    NM="$DUMPBIN"
-  fi
-fi
-test -z "$NM" && NM=nm
-AC_SUBST([NM])
-_LT_DECL([], [NM], [1], [A BSD- or MS-compatible name lister])dnl
-
-AC_CACHE_CHECK([the name lister ($NM) interface], [lt_cv_nm_interface],
-  [lt_cv_nm_interface="BSD nm"
-  echo "int some_variable = 0;" > conftest.$ac_ext
-  (eval echo "\"\$as_me:__oline__: $ac_compile\"" >&AS_MESSAGE_LOG_FD)
-  (eval "$ac_compile" 2>conftest.err)
-  cat conftest.err >&AS_MESSAGE_LOG_FD
-  (eval echo "\"\$as_me:__oline__: $NM \\\"conftest.$ac_objext\\\"\"" >&AS_MESSAGE_LOG_FD)
-  (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)
-  cat conftest.err >&AS_MESSAGE_LOG_FD
-  (eval echo "\"\$as_me:__oline__: output\"" >&AS_MESSAGE_LOG_FD)
-  cat conftest.out >&AS_MESSAGE_LOG_FD
-  if $GREP 'External.*some_variable' conftest.out > /dev/null; then
-    lt_cv_nm_interface="MS dumpbin"
-  fi
-  rm -f conftest*])
-])# LT_PATH_NM
-
-# Old names:
-AU_ALIAS([AM_PROG_NM], [LT_PATH_NM])
-AU_ALIAS([AC_PROG_NM], [LT_PATH_NM])
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AM_PROG_NM], [])
-dnl AC_DEFUN([AC_PROG_NM], [])
-
-
-# LT_LIB_M
-# --------
-# check for math library
-AC_DEFUN([LT_LIB_M],
-[AC_REQUIRE([AC_CANONICAL_HOST])dnl
-LIBM=
-case $host in
-*-*-beos* | *-*-cygwin* | *-*-pw32* | *-*-darwin*)
-  # These system don't have libm, or don't need it
-  ;;
-*-ncr-sysv4.3*)
-  AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
-  AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm")
-  ;;
-*)
-  AC_CHECK_LIB(m, cos, LIBM="-lm")
-  ;;
-esac
-AC_SUBST([LIBM])
-])# LT_LIB_M
-
-# Old name:
-AU_ALIAS([AC_CHECK_LIBM], [LT_LIB_M])
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AC_CHECK_LIBM], [])
-
-
-# _LT_COMPILER_NO_RTTI([TAGNAME])
-# -------------------------------
-m4_defun([_LT_COMPILER_NO_RTTI],
-[m4_require([_LT_TAG_COMPILER])dnl
-
-_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
-
-if test "$GCC" = yes; then
-  _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
-
-  _LT_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions],
-    lt_cv_prog_compiler_rtti_exceptions,
-    [-fno-rtti -fno-exceptions], [],
-    [_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"])
-fi
-_LT_TAGDECL([no_builtin_flag], [lt_prog_compiler_no_builtin_flag], [1],
-        [Compiler flag to turn off builtin functions])
-])# _LT_COMPILER_NO_RTTI
-
-
-# _LT_CMD_GLOBAL_SYMBOLS
-# ----------------------
-m4_defun([_LT_CMD_GLOBAL_SYMBOLS],
-[AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([LT_PATH_NM])dnl
-AC_REQUIRE([LT_PATH_LD])dnl
-m4_require([_LT_DECL_SED])dnl
-m4_require([_LT_DECL_EGREP])dnl
-m4_require([_LT_TAG_COMPILER])dnl
-
-# Check for command to grab the raw symbol name followed by C symbol from nm.
-AC_MSG_CHECKING([command to parse $NM output from $compiler object])
-AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe],
-[
-# These are sane defaults that work on at least a few old systems.
-# [They come from Ultrix.  What could be older than Ultrix?!! ;)]
-
-# Character class describing NM global symbol codes.
-symcode='[[BCDEGRST]]'
-
-# Regexp to match symbols that can be accessed directly from C.
-sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)'
-
-# Define system-specific variables.
-case $host_os in
-aix*)
-  symcode='[[BCDT]]'
-  ;;
-cygwin* | mingw* | pw32* | cegcc*)
-  symcode='[[ABCDGISTW]]'
-  ;;
-hpux*)
-  if test "$host_cpu" = ia64; then
-    symcode='[[ABCDEGRST]]'
-  fi
-  ;;
-irix* | nonstopux*)
-  symcode='[[BCDEGRST]]'
-  ;;
-osf*)
-  symcode='[[BCDEGQRST]]'
-  ;;
-solaris*)
-  symcode='[[BDRT]]'
-  ;;
-sco3.2v5*)
-  symcode='[[DT]]'
-  ;;
-sysv4.2uw2*)
-  symcode='[[DT]]'
-  ;;
-sysv5* | sco5v6* | unixware* | OpenUNIX*)
-  symcode='[[ABDT]]'
-  ;;
-sysv4)
-  symcode='[[DFNSTU]]'
-  ;;
-esac
-
-# If we're using GNU nm, then use its standard symbol codes.
-case `$NM -V 2>&1` in
-*GNU* | *'with BFD'*)
-  symcode='[[ABCDGIRSTW]]' ;;
-esac
-
-# Transform an extracted symbol line into a proper C declaration.
-# Some systems (esp. on ia64) link data and code symbols differently,
-# so use this general approach.
-lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
-
-# Transform an extracted symbol line into symbol name and symbol address
-lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/  {\"\2\", (void *) \&\2},/p'"
-lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([[^ ]]*\) $/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \(lib[[^ ]]*\)$/  {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/  {\"lib\2\", (void *) \&\2},/p'"
-
-# Handle CRLF in mingw tool chain
-opt_cr=
-case $build_os in
-mingw*)
-  opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp
-  ;;
-esac
-
-# Try without a prefix underscore, then with it.
-for ac_symprfx in "" "_"; do
-
-  # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
-  symxfrm="\\1 $ac_symprfx\\2 \\2"
-
-  # Write the raw and C identifiers.
-  if test "$lt_cv_nm_interface" = "MS dumpbin"; then
-    # Fake it for dumpbin and say T for any non-static function
-    # and D for any global variable.
-    # Also find C++ and __fastcall symbols from MSVC++,
-    # which start with @ or ?.
-    lt_cv_sys_global_symbol_pipe="$AWK ['"\
-"     {last_section=section; section=\$ 3};"\
-"     /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\
-"     \$ 0!~/External *\|/{next};"\
-"     / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\
-"     {if(hide[section]) next};"\
-"     {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\
-"     {split(\$ 0, a, /\||\r/); split(a[2], s)};"\
-"     s[1]~/^[@?]/{print s[1], s[1]; next};"\
-"     s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\
-"     ' prfx=^$ac_symprfx]"
-  else
-    lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[     ]]\($symcode$symcode*\)[[       ]][[    ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
-  fi
-
-  # Check to see that the pipe works correctly.
-  pipe_works=no
-
-  rm -f conftest*
-  cat > conftest.$ac_ext <<_LT_EOF
-#ifdef __cplusplus
-extern "C" {
-#endif
-char nm_test_var;
-void nm_test_func(void);
-void nm_test_func(void){}
-#ifdef __cplusplus
-}
-#endif
-int main(){nm_test_var='a';nm_test_func();return(0);}
-_LT_EOF
-
-  if AC_TRY_EVAL(ac_compile); then
-    # Now try to grab the symbols.
-    nlist=conftest.nm
-    if AC_TRY_EVAL(NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) && test -s "$nlist"; then
-      # Try sorting and uniquifying the output.
-      if sort "$nlist" | uniq > "$nlist"T; then
-        mv -f "$nlist"T "$nlist"
-      else
-        rm -f "$nlist"T
-      fi
-
-      # Make sure that we snagged all the symbols we need.
-      if $GREP ' nm_test_var$' "$nlist" >/dev/null; then
-        if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
-          cat <<_LT_EOF > conftest.$ac_ext
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-_LT_EOF
-          # Now generate the symbol file.
-          eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext'
-
-          cat <<_LT_EOF >> conftest.$ac_ext
-
-/* The mapping between symbol names and symbols.  */
-const struct {
-  const char *name;
-  void       *address;
-}
-lt__PROGRAM__LTX_preloaded_symbols[[]] =
-{
-  { "@PROGRAM@", (void *) 0 },
-_LT_EOF
-          $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/  {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
-          cat <<\_LT_EOF >> conftest.$ac_ext
-  {0, (void *) 0}
-};
-
-/* This works around a problem in FreeBSD linker */
-#ifdef FREEBSD_WORKAROUND
-static const void *lt_preloaded_setup() {
-  return lt__PROGRAM__LTX_preloaded_symbols;
-}
-#endif
-
-#ifdef __cplusplus
-}
-#endif
-_LT_EOF
-          # Now try linking the two files.
-          mv conftest.$ac_objext conftstm.$ac_objext
-          lt_save_LIBS="$LIBS"
-          lt_save_CFLAGS="$CFLAGS"
-          LIBS="conftstm.$ac_objext"
-          CFLAGS="$CFLAGS$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)"
-          if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then
-            pipe_works=yes
-          fi
-          LIBS="$lt_save_LIBS"
-          CFLAGS="$lt_save_CFLAGS"
-        else
-          echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD
-        fi
-      else
-        echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD
-      fi
-    else
-      echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD
-    fi
-  else
-    echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD
-    cat conftest.$ac_ext >&5
-  fi
-  rm -rf conftest* conftst*
-
-  # Do not use the global_symbol_pipe unless it works.
-  if test "$pipe_works" = yes; then
-    break
-  else
-    lt_cv_sys_global_symbol_pipe=
-  fi
-done
-])
-if test -z "$lt_cv_sys_global_symbol_pipe"; then
-  lt_cv_sys_global_symbol_to_cdecl=
-fi
-if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
-  AC_MSG_RESULT(failed)
-else
-  AC_MSG_RESULT(ok)
-fi
-
-_LT_DECL([global_symbol_pipe], [lt_cv_sys_global_symbol_pipe], [1],
-    [Take the output of nm and produce a listing of raw symbols and C names])
-_LT_DECL([global_symbol_to_cdecl], [lt_cv_sys_global_symbol_to_cdecl], [1],
-    [Transform the output of nm in a proper C declaration])
-_LT_DECL([global_symbol_to_c_name_address],
-    [lt_cv_sys_global_symbol_to_c_name_address], [1],
-    [Transform the output of nm in a C name address pair])
-_LT_DECL([global_symbol_to_c_name_address_lib_prefix],
-    [lt_cv_sys_global_symbol_to_c_name_address_lib_prefix], [1],
-    [Transform the output of nm in a C name address pair when lib prefix is needed])
-]) # _LT_CMD_GLOBAL_SYMBOLS
-
-
-# _LT_COMPILER_PIC([TAGNAME])
-# ---------------------------
-m4_defun([_LT_COMPILER_PIC],
-[m4_require([_LT_TAG_COMPILER])dnl
-_LT_TAGVAR(lt_prog_compiler_wl, $1)=
-_LT_TAGVAR(lt_prog_compiler_pic, $1)=
-_LT_TAGVAR(lt_prog_compiler_static, $1)=
-
-AC_MSG_CHECKING([for $compiler option to produce PIC])
-m4_if([$1], [CXX], [
-  # C++ specific cases for pic, static, wl, etc.
-  if test "$GXX" = yes; then
-    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-    _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
-
-    case $host_os in
-    aix*)
-      # All AIX code is PIC.
-      if test "$host_cpu" = ia64; then
-        # AIX 5 now supports IA64 processor
-        _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-      fi
-      ;;
-
-    amigaos*)
-      case $host_cpu in
-      powerpc)
-            # see comment about AmigaOS4 .so support
-            _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-        ;;
-      m68k)
-            # FIXME: we need at least 68020 code to build shared libraries, but
-            # adding the `-m68020' flag to GCC prevents building anything better,
-            # like `-m68040'.
-            _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
-        ;;
-      esac
-      ;;
-
-    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
-      # PIC is the default for these OSes.
-      ;;
-    mingw* | cygwin* | os2* | pw32* | cegcc*)
-      # This hack is so that the source file can tell whether it is being
-      # built for inclusion in a dll (and should export symbols for example).
-      # Although the cygwin gcc ignores -fPIC, still need this for old-style
-      # (--disable-auto-import) libraries
-      m4_if([$1], [GCJ], [],
-        [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
-      ;;
-    darwin* | rhapsody*)
-      # PIC is the default on this platform
-      # Common symbols not allowed in MH_DYLIB files
-      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
-      ;;
-    *djgpp*)
-      # DJGPP does not support shared libraries at all
-      _LT_TAGVAR(lt_prog_compiler_pic, $1)=
-      ;;
-    interix[[3-9]]*)
-      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
-      # Instead, we relocate shared libraries at runtime.
-      ;;
-    sysv4*MP*)
-      if test -d /usr/nec; then
-        _LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
-      fi
-      ;;
-    hpux*)
-      # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
-      # PA HP-UX.  On IA64 HP-UX, PIC is the default but the pic flag
-      # sets the default TLS model and affects inlining.
-      case $host_cpu in
-      hppa*64*)
-        ;;
-      *)
-        _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-        ;;
-      esac
-      ;;
-    *qnx* | *nto*)
-      # QNX uses GNU C++, but need to define -shared option too, otherwise
-      # it will coredump.
-      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
-      ;;
-    *)
-      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-      ;;
-    esac
-  else
-    case $host_os in
-      aix[[4-9]]*)
-        # All AIX code is PIC.
-        if test "$host_cpu" = ia64; then
-          # AIX 5 now supports IA64 processor
-          _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-        else
-          _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
-        fi
-        ;;
-      chorus*)
-        case $cc_basename in
-        cxch68*)
-          # Green Hills C++ Compiler
-          # _LT_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
-          ;;
-        esac
-        ;;
-      dgux*)
-        case $cc_basename in
-          ec++*)
-            _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-            ;;
-          ghcx*)
-            # Green Hills C++ Compiler
-            _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-            ;;
-          *)
-            ;;
-        esac
-        ;;
-      freebsd* | dragonfly*)
-        # FreeBSD uses GNU C++
-        ;;
-      hpux9* | hpux10* | hpux11*)
-        case $cc_basename in
-          CC*)
-            _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-            _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
-            if test "$host_cpu" != ia64; then
-              _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
-            fi
-            ;;
-          aCC*)
-            _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-            _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
-            case $host_cpu in
-            hppa*64*|ia64*)
-              # +Z the default
-              ;;
-            *)
-              _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
-              ;;
-            esac
-            ;;
-          *)
-            ;;
-        esac
-        ;;
-      interix*)
-        # This is c89, which is MS Visual C++ (no shared libs)
-        # Anyone wants to do a port?
-        ;;
-      irix5* | irix6* | nonstopux*)
-        case $cc_basename in
-          CC*)
-            _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-            _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-            # CC pic flag -KPIC is the default.
-            ;;
-          *)
-            ;;
-        esac
-        ;;
-      linux* | k*bsd*-gnu | kopensolaris*-gnu)
-        case $cc_basename in
-          KCC*)
-            # KAI C++ Compiler
-            _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
-            _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-            ;;
-          ecpc* )
-            # old Intel C++ for x86_64 which still supported -KPIC.
-            _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-            _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-            _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
-            ;;
-          icpc* )
-            # Intel C++, used to be incompatible with GCC.
-            # ICC 10 doesn't accept -KPIC any more.
-            _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-            _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-            _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
-            ;;
-          pgCC* | pgcpp*)
-            # Portland Group C++ compiler
-            _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-            _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
-            _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-            ;;
-          cxx*)
-            # Compaq C++
-            # Make sure the PIC flag is empty.  It appears that all Alpha
-            # Linux and Compaq Tru64 Unix objects are PIC.
-            _LT_TAGVAR(lt_prog_compiler_pic, $1)=
-            _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-            ;;
-          xlc* | xlC*)
-            # IBM XL 8.0 on PPC
-            _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-            _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic'
-            _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink'
-            ;;
-          *)
-            case `$CC -V 2>&1 | sed 5q` in
-            *Sun\ C*)
-              # Sun C++ 5.9
-              _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-              _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-              _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
-              ;;
-            esac
-            ;;
-        esac
-        ;;
-      lynxos*)
-        ;;
-      m88k*)
-        ;;
-      mvs*)
-        case $cc_basename in
-          cxx*)
-            _LT_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall'
-            ;;
-          *)
-            ;;
-        esac
-        ;;
-      netbsd* | netbsdelf*-gnu)
-        ;;
-      *qnx* | *nto*)
-        # QNX uses GNU C++, but need to define -shared option too, otherwise
-        # it will coredump.
-        _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
-        ;;
-      osf3* | osf4* | osf5*)
-        case $cc_basename in
-          KCC*)
-            _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
-            ;;
-          RCC*)
-            # Rational C++ 2.4.1
-            _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-            ;;
-          cxx*)
-            # Digital/Compaq C++
-            _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-            # Make sure the PIC flag is empty.  It appears that all Alpha
-            # Linux and Compaq Tru64 Unix objects are PIC.
-            _LT_TAGVAR(lt_prog_compiler_pic, $1)=
-            _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-            ;;
-          *)
-            ;;
-        esac
-        ;;
-      psos*)
-        ;;
-      solaris*)
-        case $cc_basename in
-          CC*)
-            # Sun C++ 4.2, 5.x and Centerline C++
-            _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-            _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-            _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
-            ;;
-          gcx*)
-            # Green Hills C++ Compiler
-            _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
-            ;;
-          *)
-            ;;
-        esac
-        ;;
-      sunos4*)
-        case $cc_basename in
-          CC*)
-            # Sun C++ 4.x
-            _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-            _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-            ;;
-          lcc*)
-            # Lucid
-            _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-            ;;
-          *)
-            ;;
-        esac
-        ;;
-      sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
-        case $cc_basename in
-          CC*)
-            _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-            _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-            _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-            ;;
-        esac
-        ;;
-      tandem*)
-        case $cc_basename in
-          NCC*)
-            # NonStop-UX NCC 3.20
-            _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-            ;;
-          *)
-            ;;
-        esac
-        ;;
-      vxworks*)
-        ;;
-      *)
-        _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
-        ;;
-    esac
-  fi
-],
-[
-  if test "$GCC" = yes; then
-    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-    _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
-
-    case $host_os in
-      aix*)
-      # All AIX code is PIC.
-      if test "$host_cpu" = ia64; then
-        # AIX 5 now supports IA64 processor
-        _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-      fi
-      ;;
-
-    amigaos*)
-      case $host_cpu in
-      powerpc)
-            # see comment about AmigaOS4 .so support
-            _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-        ;;
-      m68k)
-            # FIXME: we need at least 68020 code to build shared libraries, but
-            # adding the `-m68020' flag to GCC prevents building anything better,
-            # like `-m68040'.
-            _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
-        ;;
-      esac
-      ;;
-
-    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
-      # PIC is the default for these OSes.
-      ;;
-
-    mingw* | cygwin* | pw32* | os2* | cegcc*)
-      # This hack is so that the source file can tell whether it is being
-      # built for inclusion in a dll (and should export symbols for example).
-      # Although the cygwin gcc ignores -fPIC, still need this for old-style
-      # (--disable-auto-import) libraries
-      m4_if([$1], [GCJ], [],
-        [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
-      ;;
-
-    darwin* | rhapsody*)
-      # PIC is the default on this platform
-      # Common symbols not allowed in MH_DYLIB files
-      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
-      ;;
-
-    hpux*)
-      # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
-      # PA HP-UX.  On IA64 HP-UX, PIC is the default but the pic flag
-      # sets the default TLS model and affects inlining.
-      case $host_cpu in
-      hppa*64*)
-        # +Z the default
-        ;;
-      *)
-        _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-        ;;
-      esac
-      ;;
-
-    interix[[3-9]]*)
-      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
-      # Instead, we relocate shared libraries at runtime.
-      ;;
-
-    msdosdjgpp*)
-      # Just because we use GCC doesn't mean we suddenly get shared libraries
-      # on systems that don't support them.
-      _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
-      enable_shared=no
-      ;;
-
-    *nto* | *qnx*)
-      # QNX uses GNU C++, but need to define -shared option too, otherwise
-      # it will coredump.
-      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
-      ;;
-
-    sysv4*MP*)
-      if test -d /usr/nec; then
-        _LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
-      fi
-      ;;
-
-    *)
-      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-      ;;
-    esac
-  else
-    # PORTME Check for flag to pass linker flags through the system compiler.
-    case $host_os in
-    aix*)
-      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-      if test "$host_cpu" = ia64; then
-        # AIX 5 now supports IA64 processor
-        _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-      else
-        _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
-      fi
-      ;;
-
-    mingw* | cygwin* | pw32* | os2* | cegcc*)
-      # This hack is so that the source file can tell whether it is being
-      # built for inclusion in a dll (and should export symbols for example).
-      m4_if([$1], [GCJ], [],
-        [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
-      ;;
-
-    hpux9* | hpux10* | hpux11*)
-      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-      # not for PA HP-UX.
-      case $host_cpu in
-      hppa*64*|ia64*)
-        # +Z the default
-        ;;
-      *)
-        _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
-        ;;
-      esac
-      # Is there a better lt_prog_compiler_static that works with the bundled CC?
-      _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
-      ;;
-
-    irix5* | irix6* | nonstopux*)
-      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-      # PIC (with -KPIC) is the default.
-      _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-      ;;
-
-    linux* | k*bsd*-gnu | kopensolaris*-gnu)
-      case $cc_basename in
-      # old Intel for x86_64 which still supported -KPIC.
-      ecc*)
-        _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-        _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-        _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
-        ;;
-      # icc used to be incompatible with GCC.
-      # ICC 10 doesn't accept -KPIC any more.
-      icc* | ifort*)
-        _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-        _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-        _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
-        ;;
-      # Lahey Fortran 8.1.
-      lf95*)
-        _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-        _LT_TAGVAR(lt_prog_compiler_pic, $1)='--shared'
-        _LT_TAGVAR(lt_prog_compiler_static, $1)='--static'
-        ;;
-      pgcc* | pgf77* | pgf90* | pgf95*)
-        # Portland Group compilers (*not* the Pentium gcc compiler,
-        # which looks to be a dead project)
-        _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-        _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
-        _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-        ;;
-      ccc*)
-        _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-        # All Alpha code is PIC.
-        _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-        ;;
-      xl*)
-        # IBM XL C 8.0/Fortran 10.1 on PPC
-        _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-        _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic'
-        _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink'
-        ;;
-      *)
-        case `$CC -V 2>&1 | sed 5q` in
-        *Sun\ C*)
-          # Sun C 5.9
-          _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-          _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-          _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-          ;;
-        *Sun\ F*)
-          # Sun Fortran 8.3 passes all unrecognized flags to the linker
-          _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-          _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-          _LT_TAGVAR(lt_prog_compiler_wl, $1)=''
-          ;;
-        esac
-        ;;
-      esac
-      ;;
-
-    newsos6)
-      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-      ;;
-
-    *nto* | *qnx*)
-      # QNX uses GNU C++, but need to define -shared option too, otherwise
-      # it will coredump.
-      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
-      ;;
-
-    osf3* | osf4* | osf5*)
-      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-      # All OSF/1 code is PIC.
-      _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-      ;;
-
-    rdos*)
-      _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-      ;;
-
-    solaris*)
-      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-      case $cc_basename in
-      f77* | f90* | f95*)
-        _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';;
-      *)
-        _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';;
-      esac
-      ;;
-
-    sunos4*)
-      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
-      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
-      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-      ;;
-
-    sysv4 | sysv4.2uw2* | sysv4.3*)
-      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-      ;;
-
-    sysv4*MP*)
-      if test -d /usr/nec ;then
-        _LT_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic'
-        _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-      fi
-      ;;
-
-    sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
-      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-      ;;
-
-    unicos*)
-      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-      _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
-      ;;
-
-    uts4*)
-      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-      ;;
-
-    *)
-      _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
-      ;;
-    esac
-  fi
-])
-case $host_os in
-  # For platforms which do not support PIC, -DPIC is meaningless:
-  *djgpp*)
-    _LT_TAGVAR(lt_prog_compiler_pic, $1)=
-    ;;
-  *)
-    _LT_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])"
-    ;;
-esac
-AC_MSG_RESULT([$_LT_TAGVAR(lt_prog_compiler_pic, $1)])
-_LT_TAGDECL([wl], [lt_prog_compiler_wl], [1],
-        [How to pass a linker flag through the compiler])
-
-#
-# Check to make sure the PIC flag actually works.
-#
-if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then
-  _LT_COMPILER_OPTION([if $compiler PIC flag $_LT_TAGVAR(lt_prog_compiler_pic, $1) works],
-    [_LT_TAGVAR(lt_cv_prog_compiler_pic_works, $1)],
-    [$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])], [],
-    [case $_LT_TAGVAR(lt_prog_compiler_pic, $1) in
-     "" | " "*) ;;
-     *) _LT_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_TAGVAR(lt_prog_compiler_pic, $1)" ;;
-     esac],
-    [_LT_TAGVAR(lt_prog_compiler_pic, $1)=
-     _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no])
-fi
-_LT_TAGDECL([pic_flag], [lt_prog_compiler_pic], [1],
-        [Additional compiler flags for building library objects])
-
-#
-# Check to make sure the static flag actually works.
-#
-wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_TAGVAR(lt_prog_compiler_static, $1)\"
-_LT_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works],
-  _LT_TAGVAR(lt_cv_prog_compiler_static_works, $1),
-  $lt_tmp_static_flag,
-  [],
-  [_LT_TAGVAR(lt_prog_compiler_static, $1)=])
-_LT_TAGDECL([link_static_flag], [lt_prog_compiler_static], [1],
-        [Compiler flag to prevent dynamic linking])
-])# _LT_COMPILER_PIC
-
-
-# _LT_LINKER_SHLIBS([TAGNAME])
-# ----------------------------
-# See if the linker supports building shared libraries.
-m4_defun([_LT_LINKER_SHLIBS],
-[AC_REQUIRE([LT_PATH_LD])dnl
-AC_REQUIRE([LT_PATH_NM])dnl
-m4_require([_LT_FILEUTILS_DEFAULTS])dnl
-m4_require([_LT_DECL_EGREP])dnl
-m4_require([_LT_DECL_SED])dnl
-m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl
-m4_require([_LT_TAG_COMPILER])dnl
-AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
-m4_if([$1], [CXX], [
-  _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-  case $host_os in
-  aix[[4-9]]*)
-    # If we're using GNU nm, then we don't want the "-C" option.
-    # -C means demangle to AIX nm, but means don't demangle with GNU nm
-    if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
-      _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
-    else
-      _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
-    fi
-    ;;
-  pw32*)
-    _LT_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds"
-  ;;
-  cygwin* | mingw* | cegcc*)
-    _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;/^.*[[ ]]__nm__/s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols'
-  ;;
-  linux* | k*bsd*-gnu)
-    _LT_TAGVAR(link_all_deplibs, $1)=no
-  ;;
-  *)
-    _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-  ;;
-  esac
-  _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
-], [
-  runpath_var=
-  _LT_TAGVAR(allow_undefined_flag, $1)=
-  _LT_TAGVAR(always_export_symbols, $1)=no
-  _LT_TAGVAR(archive_cmds, $1)=
-  _LT_TAGVAR(archive_expsym_cmds, $1)=
-  _LT_TAGVAR(compiler_needs_object, $1)=no
-  _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
-  _LT_TAGVAR(export_dynamic_flag_spec, $1)=
-  _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-  _LT_TAGVAR(hardcode_automatic, $1)=no
-  _LT_TAGVAR(hardcode_direct, $1)=no
-  _LT_TAGVAR(hardcode_direct_absolute, $1)=no
-  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
-  _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
-  _LT_TAGVAR(hardcode_libdir_separator, $1)=
-  _LT_TAGVAR(hardcode_minus_L, $1)=no
-  _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
-  _LT_TAGVAR(inherit_rpath, $1)=no
-  _LT_TAGVAR(link_all_deplibs, $1)=unknown
-  _LT_TAGVAR(module_cmds, $1)=
-  _LT_TAGVAR(module_expsym_cmds, $1)=
-  _LT_TAGVAR(old_archive_from_new_cmds, $1)=
-  _LT_TAGVAR(old_archive_from_expsyms_cmds, $1)=
-  _LT_TAGVAR(thread_safe_flag_spec, $1)=
-  _LT_TAGVAR(whole_archive_flag_spec, $1)=
-  # include_expsyms should be a list of space-separated symbols to be *always*
-  # included in the symbol list
-  _LT_TAGVAR(include_expsyms, $1)=
-  # exclude_expsyms can be an extended regexp of symbols to exclude
-  # it will be wrapped by ` (' and `)$', so one must not match beginning or
-  # end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
-  # as well as any symbol that contains `d'.
-  _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
-  # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
-  # platforms (ab)use it in PIC code, but their linkers get confused if
-  # the symbol is explicitly referenced.  Since portable code cannot
-  # rely on this symbol name, it's probably fine to never include it in
-  # preloaded symbol tables.
-  # Exclude shared library initialization/finalization symbols.
-dnl Note also adjust exclude_expsyms for C++ above.
-  extract_expsyms_cmds=
-
-  case $host_os in
-  cygwin* | mingw* | pw32* | cegcc*)
-    # FIXME: the MSVC++ port hasn't been tested in a loooong time
-    # When not using gcc, we currently assume that we are using
-    # Microsoft Visual C++.
-    if test "$GCC" != yes; then
-      with_gnu_ld=no
-    fi
-    ;;
-  interix*)
-    # we just hope/assume this is gcc and not c89 (= MSVC++)
-    with_gnu_ld=yes
-    ;;
-  openbsd*)
-    with_gnu_ld=no
-    ;;
-  linux* | k*bsd*-gnu)
-    _LT_TAGVAR(link_all_deplibs, $1)=no
-    ;;
-  esac
-
-  _LT_TAGVAR(ld_shlibs, $1)=yes
-  if test "$with_gnu_ld" = yes; then
-    # If archive_cmds runs LD, not CC, wlarc should be empty
-    wlarc='${wl}'
-
-    # Set some defaults for GNU ld with shared library support. These
-    # are reset later if shared libraries are not supported. Putting them
-    # here allows them to be overridden if necessary.
-    runpath_var=LD_RUN_PATH
-    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-    # ancient GNU ld didn't support --whole-archive et. al.
-    if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then
-      _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-    else
-      _LT_TAGVAR(whole_archive_flag_spec, $1)=
-    fi
-    supports_anon_versioning=no
-    case `$LD -v 2>&1` in
-      *GNU\ gold*) supports_anon_versioning=yes ;;
-      *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11
-      *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
-      *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
-      *\ 2.11.*) ;; # other 2.11 versions
-      *) supports_anon_versioning=yes ;;
-    esac
-
-    # See if GNU ld supports shared libraries.
-    case $host_os in
-    aix[[3-9]]*)
-      # On AIX/PPC, the GNU linker is very broken
-      if test "$host_cpu" != ia64; then
-        _LT_TAGVAR(ld_shlibs, $1)=no
-        cat <<_LT_EOF 1>&2
-
-*** Warning: the GNU linker, at least up to release 2.9.1, is reported
-*** to be unable to reliably create shared libraries on AIX.
-*** Therefore, libtool is disabling shared libraries support.  If you
-*** really care for shared libraries, you may want to modify your PATH
-*** so that a non-GNU linker is found, and then restart.
-
-_LT_EOF
-      fi
-      ;;
-
-    amigaos*)
-      case $host_cpu in
-      powerpc)
-            # see comment about AmigaOS4 .so support
-            _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-            _LT_TAGVAR(archive_expsym_cmds, $1)=''
-        ;;
-      m68k)
-            _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-            _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-            _LT_TAGVAR(hardcode_minus_L, $1)=yes
-        ;;
-      esac
-      ;;
-
-    beos*)
-      if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
-        _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
-        # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
-        # support --undefined.  This deserves some investigation.  FIXME
-        _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-      else
-        _LT_TAGVAR(ld_shlibs, $1)=no
-      fi
-      ;;
-
-    cygwin* | mingw* | pw32* | cegcc*)
-      # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
-      # as there is no search path for DLLs.
-      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-      _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
-      _LT_TAGVAR(always_export_symbols, $1)=no
-      _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
-      _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols'
-
-      if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
-        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-        # If the export-symbols file already is a .def file (1st line
-        # is EXPORTS), use it as is; otherwise, prepend...
-        _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-          cp $export_symbols $output_objdir/$soname.def;
-        else
-          echo EXPORTS > $output_objdir/$soname.def;
-          cat $export_symbols >> $output_objdir/$soname.def;
-        fi~
-        $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-      else
-        _LT_TAGVAR(ld_shlibs, $1)=no
-      fi
-      ;;
-
-    interix[[3-9]]*)
-      _LT_TAGVAR(hardcode_direct, $1)=no
-      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-      _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-      # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
-      # Instead, shared libraries are loaded at an image base (0x10000000 by
-      # default) and relocated if they conflict, which is a slow very memory
-      # consuming and fragmenting process.  To avoid this, we pick a random,
-      # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
-      # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
-      _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-      _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-      ;;
-
-    gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu)
-      tmp_diet=no
-      if test "$host_os" = linux-dietlibc; then
-        case $cc_basename in
-          diet\ *) tmp_diet=yes;;       # linux-dietlibc with static linking (!diet-dyn)
-        esac
-      fi
-      if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
-         && test "$tmp_diet" = no
-      then
-        tmp_addflag=
-        tmp_sharedflag='-shared'
-        case $cc_basename,$host_cpu in
-        pgcc*)                          # Portland Group C compiler
-          _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
-          tmp_addflag=' $pic_flag'
-          ;;
-        pgf77* | pgf90* | pgf95*)       # Portland Group f77 and f90 compilers
-          _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
-          tmp_addflag=' $pic_flag -Mnomain' ;;
-        ecc*,ia64* | icc*,ia64*)        # Intel C compiler on ia64
-          tmp_addflag=' -i_dynamic' ;;
-        efc*,ia64* | ifort*,ia64*)      # Intel Fortran compiler on ia64
-          tmp_addflag=' -i_dynamic -nofor_main' ;;
-        ifc* | ifort*)                  # Intel Fortran compiler
-          tmp_addflag=' -nofor_main' ;;
-        lf95*)                          # Lahey Fortran 8.1
-          _LT_TAGVAR(whole_archive_flag_spec, $1)=
-          tmp_sharedflag='--shared' ;;
-        xl[[cC]]*)                      # IBM XL C 8.0 on PPC (deal with xlf below)
-          tmp_sharedflag='-qmkshrobj'
-          tmp_addflag= ;;
-        esac
-        case `$CC -V 2>&1 | sed 5q` in
-        *Sun\ C*)                       # Sun C 5.9
-          _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
-          _LT_TAGVAR(compiler_needs_object, $1)=yes
-          tmp_sharedflag='-G' ;;
-        *Sun\ F*)                       # Sun Fortran 8.3
-          tmp_sharedflag='-G' ;;
-        esac
-        _LT_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-
-        if test "x$supports_anon_versioning" = xyes; then
-          _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
-            cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
-            echo "local: *; };" >> $output_objdir/$libname.ver~
-            $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
-        fi
-
-        case $cc_basename in
-        xlf*)
-          # IBM XL Fortran 10.1 on PPC cannot create shared libs itself
-          _LT_TAGVAR(whole_archive_flag_spec, $1)='--whole-archive$convenience --no-whole-archive'
-          _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
-          _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir'
-          _LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $compiler_flags -soname $soname -o $lib'
-          if test "x$supports_anon_versioning" = xyes; then
-            _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
-              cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
-              echo "local: *; };" >> $output_objdir/$libname.ver~
-              $LD -shared $libobjs $deplibs $compiler_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
-          fi
-          ;;
-        esac
-      else
-        _LT_TAGVAR(ld_shlibs, $1)=no
-      fi
-      ;;
-
-    netbsd* | netbsdelf*-gnu)
-      if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
-        _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
-        wlarc=
-      else
-        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-        _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-      fi
-      ;;
-
-    solaris*)
-      if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then
-        _LT_TAGVAR(ld_shlibs, $1)=no
-        cat <<_LT_EOF 1>&2
-
-*** Warning: The releases 2.8.* of the GNU linker cannot reliably
-*** create shared libraries on Solaris systems.  Therefore, libtool
-*** is disabling shared libraries support.  We urge you to upgrade GNU
-*** binutils to release 2.9.1 or newer.  Another option is to modify
-*** your PATH or compiler configuration so that the native linker is
-*** used, and then restart.
-
-_LT_EOF
-      elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
-        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-        _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-      else
-        _LT_TAGVAR(ld_shlibs, $1)=no
-      fi
-      ;;
-
-    sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
-      case `$LD -v 2>&1` in
-        *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*)
-        _LT_TAGVAR(ld_shlibs, $1)=no
-        cat <<_LT_EOF 1>&2
-
-*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
-*** reliably create shared libraries on SCO systems.  Therefore, libtool
-*** is disabling shared libraries support.  We urge you to upgrade GNU
-*** binutils to release 2.16.91.0.3 or newer.  Another option is to modify
-*** your PATH or compiler configuration so that the native linker is
-*** used, and then restart.
-
-_LT_EOF
-        ;;
-        *)
-          # For security reasons, it is highly recommended that you always
-          # use absolute paths for naming shared libraries, and exclude the
-          # DT_RUNPATH tag from executables and libraries.  But doing so
-          # requires that you compile everything twice, which is a pain.
-          if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
-            _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-            _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-            _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-          else
-            _LT_TAGVAR(ld_shlibs, $1)=no
-          fi
-        ;;
-      esac
-      ;;
-
-    sunos4*)
-      _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-      wlarc=
-      _LT_TAGVAR(hardcode_direct, $1)=yes
-      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-      ;;
-
-    *)
-      if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
-        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-        _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-      else
-        _LT_TAGVAR(ld_shlibs, $1)=no
-      fi
-      ;;
-    esac
-
-    if test "$_LT_TAGVAR(ld_shlibs, $1)" = no; then
-      runpath_var=
-      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
-      _LT_TAGVAR(export_dynamic_flag_spec, $1)=
-      _LT_TAGVAR(whole_archive_flag_spec, $1)=
-    fi
-  else
-    # PORTME fill in a description of your system's linker (not GNU ld)
-    case $host_os in
-    aix3*)
-      _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
-      _LT_TAGVAR(always_export_symbols, $1)=yes
-      _LT_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
-      # Note: this linker hardcodes the directories in LIBPATH if there
-      # are no directories specified by -L.
-      _LT_TAGVAR(hardcode_minus_L, $1)=yes
-      if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
-        # Neither direct hardcoding nor static linking is supported with a
-        # broken collect2.
-        _LT_TAGVAR(hardcode_direct, $1)=unsupported
-      fi
-      ;;
-
-    aix[[4-9]]*)
-      if test "$host_cpu" = ia64; then
-        # On IA64, the linker does run time linking by default, so we don't
-        # have to do anything special.
-        aix_use_runtimelinking=no
-        exp_sym_flag='-Bexport'
-        no_entry_flag=""
-      else
-        # If we're using GNU nm, then we don't want the "-C" option.
-        # -C means demangle to AIX nm, but means don't demangle with GNU nm
-        if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
-          _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
-        else
-          _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
-        fi
-        aix_use_runtimelinking=no
-
-        # Test if we are trying to use run time linking or normal
-        # AIX style linking. If -brtl is somewhere in LDFLAGS, we
-        # need to do runtime linking.
-        case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
-          for ld_flag in $LDFLAGS; do
-          if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
-            aix_use_runtimelinking=yes
-            break
-          fi
-          done
-          ;;
-        esac
-
-        exp_sym_flag='-bexport'
-        no_entry_flag='-bnoentry'
-      fi
-
-      # When large executables or shared objects are built, AIX ld can
-      # have problems creating the table of contents.  If linking a library
-      # or program results in "error TOC overflow" add -mminimal-toc to
-      # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
-      # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
-
-      _LT_TAGVAR(archive_cmds, $1)=''
-      _LT_TAGVAR(hardcode_direct, $1)=yes
-      _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
-      _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
-      _LT_TAGVAR(link_all_deplibs, $1)=yes
-      _LT_TAGVAR(file_list_spec, $1)='${wl}-f,'
-
-      if test "$GCC" = yes; then
-        case $host_os in aix4.[[012]]|aix4.[[012]].*)
-        # We only want to do this on AIX 4.2 and lower, the check
-        # below for broken collect2 doesn't work under 4.3+
-          collect2name=`${CC} -print-prog-name=collect2`
-          if test -f "$collect2name" &&
-           strings "$collect2name" | $GREP resolve_lib_name >/dev/null
-          then
-          # We have reworked collect2
-          :
-          else
-          # We have old collect2
-          _LT_TAGVAR(hardcode_direct, $1)=unsupported
-          # It fails to find uninstalled libraries when the uninstalled
-          # path is not listed in the libpath.  Setting hardcode_minus_L
-          # to unsupported forces relinking
-          _LT_TAGVAR(hardcode_minus_L, $1)=yes
-          _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-          _LT_TAGVAR(hardcode_libdir_separator, $1)=
-          fi
-          ;;
-        esac
-        shared_flag='-shared'
-        if test "$aix_use_runtimelinking" = yes; then
-          shared_flag="$shared_flag "'${wl}-G'
-        fi
-        _LT_TAGVAR(link_all_deplibs, $1)=no
-      else
-        # not using gcc
-        if test "$host_cpu" = ia64; then
-        # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
-        # chokes on -Wl,-G. The following line is correct:
-          shared_flag='-G'
-        else
-          if test "$aix_use_runtimelinking" = yes; then
-            shared_flag='${wl}-G'
-          else
-            shared_flag='${wl}-bM:SRE'
-          fi
-        fi
-      fi
-
-      _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall'
-      # It seems that -bexpall does not export symbols beginning with
-      # underscore (_), so it is better to generate a list of symbols to export.
-      _LT_TAGVAR(always_export_symbols, $1)=yes
-      if test "$aix_use_runtimelinking" = yes; then
-        # Warning - without using the other runtime loading flags (-brtl),
-        # -berok will link without error, but may produce a broken library.
-        _LT_TAGVAR(allow_undefined_flag, $1)='-berok'
-        # Determine the default libpath from the value encoded in an
-        # empty executable.
-        _LT_SYS_MODULE_PATH_AIX
-        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
-        _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
-      else
-        if test "$host_cpu" = ia64; then
-          _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
-          _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
-          _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
-        else
-         # Determine the default libpath from the value encoded in an
-         # empty executable.
-         _LT_SYS_MODULE_PATH_AIX
-         _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
-          # Warning - without using the other run time loading flags,
-          # -berok will link without error, but may produce a broken library.
-          _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
-          _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
-          # Exported symbols can be pulled into shared objects from archives
-          _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
-          _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
-          # This is similar to how AIX traditionally builds its shared libraries.
-          _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
-        fi
-      fi
-      ;;
-
-    amigaos*)
-      case $host_cpu in
-      powerpc)
-            # see comment about AmigaOS4 .so support
-            _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-            _LT_TAGVAR(archive_expsym_cmds, $1)=''
-        ;;
-      m68k)
-            _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-            _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-            _LT_TAGVAR(hardcode_minus_L, $1)=yes
-        ;;
-      esac
-      ;;
-
-    bsdi[[45]]*)
-      _LT_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic
-      ;;
-
-    cygwin* | mingw* | pw32* | cegcc*)
-      # When not using gcc, we currently assume that we are using
-      # Microsoft Visual C++.
-      # hardcode_libdir_flag_spec is actually meaningless, as there is
-      # no search path for DLLs.
-      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
-      _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
-      # Tell ltmain to make .lib files, not .a files.
-      libext=lib
-      # Tell ltmain to make .dll files, not .so files.
-      shrext_cmds=".dll"
-      # FIXME: Setting linknames here is a bad hack.
-      _LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `$ECHO "X$deplibs" | $Xsed -e '\''s/ -lc$//'\''` -link -dll~linknames='
-      # The linker will automatically build a .lib file if we build a DLL.
-      _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
-      # FIXME: Should let the user specify the lib program.
-      _LT_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs'
-      _LT_TAGVAR(fix_srcfile_path, $1)='`cygpath -w "$srcfile"`'
-      _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
-      ;;
-
-    darwin* | rhapsody*)
-      _LT_DARWIN_LINKER_FEATURES($1)
-      ;;
-
-    dgux*)
-      _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-      ;;
-
-    freebsd1*)
-      _LT_TAGVAR(ld_shlibs, $1)=no
-      ;;
-
-    # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
-    # support.  Future versions do this automatically, but an explicit c++rt0.o
-    # does not break anything, and helps significantly (at the cost of a little
-    # extra space).
-    freebsd2.2*)
-      _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
-      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-      _LT_TAGVAR(hardcode_direct, $1)=yes
-      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-      ;;
-
-    # Unfortunately, older versions of FreeBSD 2 do not have this feature.
-    freebsd2*)
-      _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-      _LT_TAGVAR(hardcode_direct, $1)=yes
-      _LT_TAGVAR(hardcode_minus_L, $1)=yes
-      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-      ;;
-
-    # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
-    freebsd* | dragonfly*)
-      _LT_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
-      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-      _LT_TAGVAR(hardcode_direct, $1)=yes
-      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-      ;;
-
-    hpux9*)
-      if test "$GCC" = yes; then
-        _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-      else
-        _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-      fi
-      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-      _LT_TAGVAR(hardcode_libdir_separator, $1)=:
-      _LT_TAGVAR(hardcode_direct, $1)=yes
-
-      # hardcode_minus_L: Not really in the search PATH,
-      # but as the default location of the library.
-      _LT_TAGVAR(hardcode_minus_L, $1)=yes
-      _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-      ;;
-
-    hpux10*)
-      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
-        _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-      else
-        _LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
-      fi
-      if test "$with_gnu_ld" = no; then
-        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-        _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir'
-        _LT_TAGVAR(hardcode_libdir_separator, $1)=:
-        _LT_TAGVAR(hardcode_direct, $1)=yes
-        _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
-        _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-        # hardcode_minus_L: Not really in the search PATH,
-        # but as the default location of the library.
-        _LT_TAGVAR(hardcode_minus_L, $1)=yes
-      fi
-      ;;
-
-    hpux11*)
-      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
-        case $host_cpu in
-        hppa*64*)
-          _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-          ;;
-        ia64*)
-          _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
-          ;;
-        *)
-          _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-          ;;
-        esac
-      else
-        case $host_cpu in
-        hppa*64*)
-          _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-          ;;
-        ia64*)
-          _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
-          ;;
-        *)
-          _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-          ;;
-        esac
-      fi
-      if test "$with_gnu_ld" = no; then
-        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-        _LT_TAGVAR(hardcode_libdir_separator, $1)=:
-
-        case $host_cpu in
-        hppa*64*|ia64*)
-          _LT_TAGVAR(hardcode_direct, $1)=no
-          _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-          ;;
-        *)
-          _LT_TAGVAR(hardcode_direct, $1)=yes
-          _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
-          _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-
-          # hardcode_minus_L: Not really in the search PATH,
-          # but as the default location of the library.
-          _LT_TAGVAR(hardcode_minus_L, $1)=yes
-          ;;
-        esac
-      fi
-      ;;
-
-    irix5* | irix6* | nonstopux*)
-      if test "$GCC" = yes; then
-        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-        # Try to use the -exported_symbol ld option, if it does not
-        # work, assume that -exports_file does not work either and
-        # implicitly export all symbols.
-        save_LDFLAGS="$LDFLAGS"
-        LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
-        AC_LINK_IFELSE(int foo(void) {},
-          _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
-        )
-        LDFLAGS="$save_LDFLAGS"
-      else
-        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
-        _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
-      fi
-      _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
-      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-      _LT_TAGVAR(hardcode_libdir_separator, $1)=:
-      _LT_TAGVAR(inherit_rpath, $1)=yes
-      _LT_TAGVAR(link_all_deplibs, $1)=yes
-      ;;
-
-    netbsd* | netbsdelf*-gnu)
-      if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
-        _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
-      else
-        _LT_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
-      fi
-      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-      _LT_TAGVAR(hardcode_direct, $1)=yes
-      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-      ;;
-
-    newsos6)
-      _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      _LT_TAGVAR(hardcode_direct, $1)=yes
-      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-      _LT_TAGVAR(hardcode_libdir_separator, $1)=:
-      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-      ;;
-
-    *nto* | *qnx*)
-      ;;
-
-    openbsd*)
-      if test -f /usr/libexec/ld.so; then
-        _LT_TAGVAR(hardcode_direct, $1)=yes
-        _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-        _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
-        if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-          _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-          _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
-          _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-          _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-        else
-          case $host_os in
-           openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*)
-             _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-             _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-             ;;
-           *)
-             _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-             _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-             ;;
-          esac
-        fi
-      else
-        _LT_TAGVAR(ld_shlibs, $1)=no
-      fi
-      ;;
-
-    os2*)
-      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-      _LT_TAGVAR(hardcode_minus_L, $1)=yes
-      _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
-      _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$ECHO DATA >> $output_objdir/$libname.def~$ECHO " SINGLE NONSHARED" >> $output_objdir/$libname.def~$ECHO EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
-      _LT_TAGVAR(old_archive_from_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
-      ;;
-
-    osf3*)
-      if test "$GCC" = yes; then
-        _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-        _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-      else
-        _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
-        _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
-      fi
-      _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
-      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-      _LT_TAGVAR(hardcode_libdir_separator, $1)=:
-      ;;
-
-    osf4* | osf5*)      # as osf3* with the addition of -msym flag
-      if test "$GCC" = yes; then
-        _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-        _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-      else
-        _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
-        _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
-        _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
-        $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
-
-        # Both c and cxx compiler support -rpath directly
-        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
-      fi
-      _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
-      _LT_TAGVAR(hardcode_libdir_separator, $1)=:
-      ;;
-
-    solaris*)
-      _LT_TAGVAR(no_undefined_flag, $1)=' -z defs'
-      if test "$GCC" = yes; then
-        wlarc='${wl}'
-        _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-        _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
-          $CC -shared ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
-      else
-        case `$CC -V 2>&1` in
-        *"Compilers 5.0"*)
-          wlarc=''
-          _LT_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
-          _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
-          $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
-          ;;
-        *)
-          wlarc='${wl}'
-          _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags'
-          _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
-          $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
-          ;;
-        esac
-      fi
-      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-      case $host_os in
-      solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
-      *)
-        # The compiler driver will combine and reorder linker options,
-        # but understands `-z linker_flag'.  GCC discards it without `$wl',
-        # but is careful enough not to reorder.
-        # Supported since Solaris 2.6 (maybe 2.5.1?)
-        if test "$GCC" = yes; then
-          _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
-        else
-          _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
-        fi
-        ;;
-      esac
-      _LT_TAGVAR(link_all_deplibs, $1)=yes
-      ;;
-
-    sunos4*)
-      if test "x$host_vendor" = xsequent; then
-        # Use $CC to link under sequent, because it throws in some extra .o
-        # files that make .init and .fini sections work.
-        _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
-      else
-        _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
-      fi
-      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-      _LT_TAGVAR(hardcode_direct, $1)=yes
-      _LT_TAGVAR(hardcode_minus_L, $1)=yes
-      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-      ;;
-
-    sysv4)
-      case $host_vendor in
-        sni)
-          _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-          _LT_TAGVAR(hardcode_direct, $1)=yes # is this really true???
-        ;;
-        siemens)
-          ## LD is ld it makes a PLAMLIB
-          ## CC just makes a GrossModule.
-          _LT_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags'
-          _LT_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs'
-          _LT_TAGVAR(hardcode_direct, $1)=no
-        ;;
-        motorola)
-          _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-          _LT_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie
-        ;;
-      esac
-      runpath_var='LD_RUN_PATH'
-      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-      ;;
-
-    sysv4.3*)
-      _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-      _LT_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport'
-      ;;
-
-    sysv4*MP*)
-      if test -d /usr/nec; then
-        _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-        _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-        runpath_var=LD_RUN_PATH
-        hardcode_runpath_var=yes
-        _LT_TAGVAR(ld_shlibs, $1)=yes
-      fi
-      ;;
-
-    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
-      _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
-      _LT_TAGVAR(archive_cmds_need_lc, $1)=no
-      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-      runpath_var='LD_RUN_PATH'
-
-      if test "$GCC" = yes; then
-        _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-        _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-      else
-        _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-        _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-      fi
-      ;;
-
-    sysv5* | sco3.2v5* | sco5v6*)
-      # Note: We can NOT use -z defs as we might desire, because we do not
-      # link with -lc, and that would cause any symbols used from libc to
-      # always be unresolved, which means just about no library would
-      # ever link correctly.  If we're not using GNU ld we use -z text
-      # though, which does catch some bad symbols but isn't as heavy-handed
-      # as -z defs.
-      _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
-      _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
-      _LT_TAGVAR(archive_cmds_need_lc, $1)=no
-      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir'
-      _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
-      _LT_TAGVAR(link_all_deplibs, $1)=yes
-      _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
-      runpath_var='LD_RUN_PATH'
-
-      if test "$GCC" = yes; then
-        _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-        _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-      else
-        _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-        _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-      fi
-      ;;
-
-    uts4*)
-      _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-      ;;
-
-    *)
-      _LT_TAGVAR(ld_shlibs, $1)=no
-      ;;
-    esac
-
-    if test x$host_vendor = xsni; then
-      case $host in
-      sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
-        _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Blargedynsym'
-        ;;
-      esac
-    fi
-  fi
-])
-AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)])
-test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
-
-_LT_TAGVAR(with_gnu_ld, $1)=$with_gnu_ld
-
-_LT_DECL([], [libext], [0], [Old archive suffix (normally "a")])dnl
-_LT_DECL([], [shrext_cmds], [1], [Shared library suffix (normally ".so")])dnl
-_LT_DECL([], [extract_expsyms_cmds], [2],
-    [The commands to extract the exported symbol list from a shared archive])
-
-#
-# Do we need to explicitly link libc?
-#
-case "x$_LT_TAGVAR(archive_cmds_need_lc, $1)" in
-x|xyes)
-  # Assume -lc should be added
-  _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
-
-  if test "$enable_shared" = yes && test "$GCC" = yes; then
-    case $_LT_TAGVAR(archive_cmds, $1) in
-    *'~'*)
-      # FIXME: we may have to deal with multi-command sequences.
-      ;;
-    '$CC '*)
-      # Test whether the compiler implicitly links with -lc since on some
-      # systems, -lgcc has to come before -lc. If gcc already passes -lc
-      # to ld, don't add -lc before -lgcc.
-      AC_MSG_CHECKING([whether -lc should be explicitly linked in])
-      $RM conftest*
-      echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-
-      if AC_TRY_EVAL(ac_compile) 2>conftest.err; then
-        soname=conftest
-        lib=conftest
-        libobjs=conftest.$ac_objext
-        deplibs=
-        wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1)
-        pic_flag=$_LT_TAGVAR(lt_prog_compiler_pic, $1)
-        compiler_flags=-v
-        linker_flags=-v
-        verstring=
-        output_objdir=.
-        libname=conftest
-        lt_save_allow_undefined_flag=$_LT_TAGVAR(allow_undefined_flag, $1)
-        _LT_TAGVAR(allow_undefined_flag, $1)=
-        if AC_TRY_EVAL(_LT_TAGVAR(archive_cmds, $1) 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1)
-        then
-          _LT_TAGVAR(archive_cmds_need_lc, $1)=no
-        else
-          _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
-        fi
-        _LT_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag
-      else
-        cat conftest.err 1>&5
-      fi
-      $RM conftest*
-      AC_MSG_RESULT([$_LT_TAGVAR(archive_cmds_need_lc, $1)])
-      ;;
-    esac
-  fi
-  ;;
-esac
-
-_LT_TAGDECL([build_libtool_need_lc], [archive_cmds_need_lc], [0],
-    [Whether or not to add -lc for building shared libraries])
-_LT_TAGDECL([allow_libtool_libs_with_static_runtimes],
-    [enable_shared_with_static_runtimes], [0],
-    [Whether or not to disallow shared libs when runtime libs are static])
-_LT_TAGDECL([], [export_dynamic_flag_spec], [1],
-    [Compiler flag to allow reflexive dlopens])
-_LT_TAGDECL([], [whole_archive_flag_spec], [1],
-    [Compiler flag to generate shared objects directly from archives])
-_LT_TAGDECL([], [compiler_needs_object], [1],
-    [Whether the compiler copes with passing no objects directly])
-_LT_TAGDECL([], [old_archive_from_new_cmds], [2],
-    [Create an old-style archive from a shared archive])
-_LT_TAGDECL([], [old_archive_from_expsyms_cmds], [2],
-    [Create a temporary old-style archive to link instead of a shared archive])
-_LT_TAGDECL([], [archive_cmds], [2], [Commands used to build a shared archive])
-_LT_TAGDECL([], [archive_expsym_cmds], [2])
-_LT_TAGDECL([], [module_cmds], [2],
-    [Commands used to build a loadable module if different from building
-    a shared archive.])
-_LT_TAGDECL([], [module_expsym_cmds], [2])
-_LT_TAGDECL([], [with_gnu_ld], [1],
-    [Whether we are building with GNU ld or not])
-_LT_TAGDECL([], [allow_undefined_flag], [1],
-    [Flag that allows shared libraries with undefined symbols to be built])
-_LT_TAGDECL([], [no_undefined_flag], [1],
-    [Flag that enforces no undefined symbols])
-_LT_TAGDECL([], [hardcode_libdir_flag_spec], [1],
-    [Flag to hardcode $libdir into a binary during linking.
-    This must work even if $libdir does not exist])
-_LT_TAGDECL([], [hardcode_libdir_flag_spec_ld], [1],
-    [[If ld is used when linking, flag to hardcode $libdir into a binary
-    during linking.  This must work even if $libdir does not exist]])
-_LT_TAGDECL([], [hardcode_libdir_separator], [1],
-    [Whether we need a single "-rpath" flag with a separated argument])
-_LT_TAGDECL([], [hardcode_direct], [0],
-    [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes
-    DIR into the resulting binary])
-_LT_TAGDECL([], [hardcode_direct_absolute], [0],
-    [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes
-    DIR into the resulting binary and the resulting library dependency is
-    "absolute", i.e impossible to change by setting ${shlibpath_var} if the
-    library is relocated])
-_LT_TAGDECL([], [hardcode_minus_L], [0],
-    [Set to "yes" if using the -LDIR flag during linking hardcodes DIR
-    into the resulting binary])
-_LT_TAGDECL([], [hardcode_shlibpath_var], [0],
-    [Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
-    into the resulting binary])
-_LT_TAGDECL([], [hardcode_automatic], [0],
-    [Set to "yes" if building a shared library automatically hardcodes DIR
-    into the library and all subsequent libraries and executables linked
-    against it])
-_LT_TAGDECL([], [inherit_rpath], [0],
-    [Set to yes if linker adds runtime paths of dependent libraries
-    to runtime path list])
-_LT_TAGDECL([], [link_all_deplibs], [0],
-    [Whether libtool must link a program against all its dependency libraries])
-_LT_TAGDECL([], [fix_srcfile_path], [1],
-    [Fix the shell variable $srcfile for the compiler])
-_LT_TAGDECL([], [always_export_symbols], [0],
-    [Set to "yes" if exported symbols are required])
-_LT_TAGDECL([], [export_symbols_cmds], [2],
-    [The commands to list exported symbols])
-_LT_TAGDECL([], [exclude_expsyms], [1],
-    [Symbols that should not be listed in the preloaded symbols])
-_LT_TAGDECL([], [include_expsyms], [1],
-    [Symbols that must always be exported])
-_LT_TAGDECL([], [prelink_cmds], [2],
-    [Commands necessary for linking programs (against libraries) with templates])
-_LT_TAGDECL([], [file_list_spec], [1],
-    [Specify filename containing input files])
-dnl FIXME: Not yet implemented
-dnl _LT_TAGDECL([], [thread_safe_flag_spec], [1],
-dnl    [Compiler flag to generate thread safe objects])
-])# _LT_LINKER_SHLIBS
-
-
-# _LT_LANG_C_CONFIG([TAG])
-# ------------------------
-# Ensure that the configuration variables for a C compiler are suitably
-# defined.  These variables are subsequently used by _LT_CONFIG to write
-# the compiler configuration to `libtool'.
-m4_defun([_LT_LANG_C_CONFIG],
-[m4_require([_LT_DECL_EGREP])dnl
-lt_save_CC="$CC"
-AC_LANG_PUSH(C)
-
-# Source file extension for C test sources.
-ac_ext=c
-
-# Object file extension for compiled C test sources.
-objext=o
-_LT_TAGVAR(objext, $1)=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code="int some_variable = 0;"
-
-# Code to be used in simple link tests
-lt_simple_link_test_code='int main(){return(0);}'
-
-_LT_TAG_COMPILER
-# Save the default compiler, since it gets overwritten when the other
-# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP.
-compiler_DEFAULT=$CC
-
-# save warnings/boilerplate of simple test code
-_LT_COMPILER_BOILERPLATE
-_LT_LINKER_BOILERPLATE
-
-## CAVEAT EMPTOR:
-## There is no encapsulation within the following macros, do not change
-## the running order or otherwise move them around unless you know exactly
-## what you are doing...
-if test -n "$compiler"; then
-  _LT_COMPILER_NO_RTTI($1)
-  _LT_COMPILER_PIC($1)
-  _LT_COMPILER_C_O($1)
-  _LT_COMPILER_FILE_LOCKS($1)
-  _LT_LINKER_SHLIBS($1)
-  _LT_SYS_DYNAMIC_LINKER($1)
-  _LT_LINKER_HARDCODE_LIBPATH($1)
-  LT_SYS_DLOPEN_SELF
-  _LT_CMD_STRIPLIB
-
-  # Report which library types will actually be built
-  AC_MSG_CHECKING([if libtool supports shared libraries])
-  AC_MSG_RESULT([$can_build_shared])
-
-  AC_MSG_CHECKING([whether to build shared libraries])
-  test "$can_build_shared" = "no" && enable_shared=no
-
-  # On AIX, shared libraries and static libraries use the same namespace, and
-  # are all built from PIC.
-  case $host_os in
-  aix3*)
-    test "$enable_shared" = yes && enable_static=no
-    if test -n "$RANLIB"; then
-      archive_cmds="$archive_cmds~\$RANLIB \$lib"
-      postinstall_cmds='$RANLIB $lib'
-    fi
-    ;;
-
-  aix[[4-9]]*)
-    if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
-      test "$enable_shared" = yes && enable_static=no
-    fi
-    ;;
-  esac
-  AC_MSG_RESULT([$enable_shared])
-
-  AC_MSG_CHECKING([whether to build static libraries])
-  # Make sure either enable_shared or enable_static is yes.
-  test "$enable_shared" = yes || enable_static=yes
-  AC_MSG_RESULT([$enable_static])
-
-  _LT_CONFIG($1)
-fi
-AC_LANG_POP
-CC="$lt_save_CC"
-])# _LT_LANG_C_CONFIG
-
-
-# _LT_PROG_CXX
-# ------------
-# Since AC_PROG_CXX is broken, in that it returns g++ if there is no c++
-# compiler, we have our own version here.
-m4_defun([_LT_PROG_CXX],
-[
-pushdef([AC_MSG_ERROR], [_lt_caught_CXX_error=yes])
-AC_PROG_CXX
-if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
-    ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
-    (test "X$CXX" != "Xg++"))) ; then
-  AC_PROG_CXXCPP
-else
-  _lt_caught_CXX_error=yes
-fi
-popdef([AC_MSG_ERROR])
-])# _LT_PROG_CXX
-
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([_LT_PROG_CXX], [])
-
-
-# _LT_LANG_CXX_CONFIG([TAG])
-# --------------------------
-# Ensure that the configuration variables for a C++ compiler are suitably
-# defined.  These variables are subsequently used by _LT_CONFIG to write
-# the compiler configuration to `libtool'.
-m4_defun([_LT_LANG_CXX_CONFIG],
-[AC_REQUIRE([_LT_PROG_CXX])dnl
-m4_require([_LT_FILEUTILS_DEFAULTS])dnl
-m4_require([_LT_DECL_EGREP])dnl
-
-AC_LANG_PUSH(C++)
-_LT_TAGVAR(archive_cmds_need_lc, $1)=no
-_LT_TAGVAR(allow_undefined_flag, $1)=
-_LT_TAGVAR(always_export_symbols, $1)=no
-_LT_TAGVAR(archive_expsym_cmds, $1)=
-_LT_TAGVAR(compiler_needs_object, $1)=no
-_LT_TAGVAR(export_dynamic_flag_spec, $1)=
-_LT_TAGVAR(hardcode_direct, $1)=no
-_LT_TAGVAR(hardcode_direct_absolute, $1)=no
-_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
-_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
-_LT_TAGVAR(hardcode_libdir_separator, $1)=
-_LT_TAGVAR(hardcode_minus_L, $1)=no
-_LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
-_LT_TAGVAR(hardcode_automatic, $1)=no
-_LT_TAGVAR(inherit_rpath, $1)=no
-_LT_TAGVAR(module_cmds, $1)=
-_LT_TAGVAR(module_expsym_cmds, $1)=
-_LT_TAGVAR(link_all_deplibs, $1)=unknown
-_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
-_LT_TAGVAR(no_undefined_flag, $1)=
-_LT_TAGVAR(whole_archive_flag_spec, $1)=
-_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
-
-# Source file extension for C++ test sources.
-ac_ext=cpp
-
-# Object file extension for compiled C++ test sources.
-objext=o
-_LT_TAGVAR(objext, $1)=$objext
-
-# No sense in running all these tests if we already determined that
-# the CXX compiler isn't working.  Some variables (like enable_shared)
-# are currently assumed to apply to all compilers on this platform,
-# and will be corrupted by setting them based on a non-working compiler.
-if test "$_lt_caught_CXX_error" != yes; then
-  # Code to be used in simple compile tests
-  lt_simple_compile_test_code="int some_variable = 0;"
-
-  # Code to be used in simple link tests
-  lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }'
-
-  # ltmain only uses $CC for tagged configurations so make sure $CC is set.
-  _LT_TAG_COMPILER
-
-  # save warnings/boilerplate of simple test code
-  _LT_COMPILER_BOILERPLATE
-  _LT_LINKER_BOILERPLATE
-
-  # Allow CC to be a program name with arguments.
-  lt_save_CC=$CC
-  lt_save_LD=$LD
-  lt_save_GCC=$GCC
-  GCC=$GXX
-  lt_save_with_gnu_ld=$with_gnu_ld
-  lt_save_path_LD=$lt_cv_path_LD
-  if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
-    lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
-  else
-    $as_unset lt_cv_prog_gnu_ld
-  fi
-  if test -n "${lt_cv_path_LDCXX+set}"; then
-    lt_cv_path_LD=$lt_cv_path_LDCXX
-  else
-    $as_unset lt_cv_path_LD
-  fi
-  test -z "${LDCXX+set}" || LD=$LDCXX
-  CC=${CXX-"c++"}
-  compiler=$CC
-  _LT_TAGVAR(compiler, $1)=$CC
-  _LT_CC_BASENAME([$compiler])
-
-  if test -n "$compiler"; then
-    # We don't want -fno-exception when compiling C++ code, so set the
-    # no_builtin_flag separately
-    if test "$GXX" = yes; then
-      _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
-    else
-      _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
-    fi
-
-    if test "$GXX" = yes; then
-      # Set up default GNU C++ configuration
-
-      LT_PATH_LD
-
-      # Check if GNU C++ uses GNU ld as the underlying linker, since the
-      # archiving commands below assume that GNU ld is being used.
-      if test "$with_gnu_ld" = yes; then
-        _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-        _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-
-        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-        _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-
-        # If archive_cmds runs LD, not CC, wlarc should be empty
-        # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
-        #     investigate it a little bit more. (MM)
-        wlarc='${wl}'
-
-        # ancient GNU ld didn't support --whole-archive et. al.
-        if eval "`$CC -print-prog-name=ld` --help 2>&1" |
-          $GREP 'no-whole-archive' > /dev/null; then
-          _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-        else
-          _LT_TAGVAR(whole_archive_flag_spec, $1)=
-        fi
-      else
-        with_gnu_ld=no
-        wlarc=
-
-        # A generic and very simple default shared library creation
-        # command for GNU C++ for the case where it uses the native
-        # linker, instead of GNU ld.  If possible, this setting should
-        # overridden to take advantage of the native linker features on
-        # the platform it is being used on.
-        _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
-      fi
-
-      # Commands to make compiler produce verbose output that lists
-      # what "hidden" libraries, object files and flags are used when
-      # linking a shared library.
-      output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
-
-    else
-      GXX=no
-      with_gnu_ld=no
-      wlarc=
-    fi
-
-    # PORTME: fill in a description of your system's C++ link characteristics
-    AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
-    _LT_TAGVAR(ld_shlibs, $1)=yes
-    case $host_os in
-      aix3*)
-        # FIXME: insert proper C++ library support
-        _LT_TAGVAR(ld_shlibs, $1)=no
-        ;;
-      aix[[4-9]]*)
-        if test "$host_cpu" = ia64; then
-          # On IA64, the linker does run time linking by default, so we don't
-          # have to do anything special.
-          aix_use_runtimelinking=no
-          exp_sym_flag='-Bexport'
-          no_entry_flag=""
-        else
-          aix_use_runtimelinking=no
-
-          # Test if we are trying to use run time linking or normal
-          # AIX style linking. If -brtl is somewhere in LDFLAGS, we
-          # need to do runtime linking.
-          case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
-            for ld_flag in $LDFLAGS; do
-              case $ld_flag in
-              *-brtl*)
-                aix_use_runtimelinking=yes
-                break
-                ;;
-              esac
-            done
-            ;;
-          esac
-
-          exp_sym_flag='-bexport'
-          no_entry_flag='-bnoentry'
-        fi
-
-        # When large executables or shared objects are built, AIX ld can
-        # have problems creating the table of contents.  If linking a library
-        # or program results in "error TOC overflow" add -mminimal-toc to
-        # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
-        # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
-
-        _LT_TAGVAR(archive_cmds, $1)=''
-        _LT_TAGVAR(hardcode_direct, $1)=yes
-        _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
-        _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
-        _LT_TAGVAR(link_all_deplibs, $1)=yes
-        _LT_TAGVAR(file_list_spec, $1)='${wl}-f,'
-
-        if test "$GXX" = yes; then
-          case $host_os in aix4.[[012]]|aix4.[[012]].*)
-          # We only want to do this on AIX 4.2 and lower, the check
-          # below for broken collect2 doesn't work under 4.3+
-          collect2name=`${CC} -print-prog-name=collect2`
-          if test -f "$collect2name" &&
-             strings "$collect2name" | $GREP resolve_lib_name >/dev/null
-          then
-            # We have reworked collect2
-            :
-          else
-            # We have old collect2
-            _LT_TAGVAR(hardcode_direct, $1)=unsupported
-            # It fails to find uninstalled libraries when the uninstalled
-            # path is not listed in the libpath.  Setting hardcode_minus_L
-            # to unsupported forces relinking
-            _LT_TAGVAR(hardcode_minus_L, $1)=yes
-            _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-            _LT_TAGVAR(hardcode_libdir_separator, $1)=
-          fi
-          esac
-          shared_flag='-shared'
-          if test "$aix_use_runtimelinking" = yes; then
-            shared_flag="$shared_flag "'${wl}-G'
-          fi
-        else
-          # not using gcc
-          if test "$host_cpu" = ia64; then
-          # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
-          # chokes on -Wl,-G. The following line is correct:
-          shared_flag='-G'
-          else
-            if test "$aix_use_runtimelinking" = yes; then
-              shared_flag='${wl}-G'
-            else
-              shared_flag='${wl}-bM:SRE'
-            fi
-          fi
-        fi
-
-        _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall'
-        # It seems that -bexpall does not export symbols beginning with
-        # underscore (_), so it is better to generate a list of symbols to
-        # export.
-        _LT_TAGVAR(always_export_symbols, $1)=yes
-        if test "$aix_use_runtimelinking" = yes; then
-          # Warning - without using the other runtime loading flags (-brtl),
-          # -berok will link without error, but may produce a broken library.
-          _LT_TAGVAR(allow_undefined_flag, $1)='-berok'
-          # Determine the default libpath from the value encoded in an empty
-          # executable.
-          _LT_SYS_MODULE_PATH_AIX
-          _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
-
-          _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
-        else
-          if test "$host_cpu" = ia64; then
-            _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
-            _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
-            _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
-          else
-            # Determine the default libpath from the value encoded in an
-            # empty executable.
-            _LT_SYS_MODULE_PATH_AIX
-            _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
-            # Warning - without using the other run time loading flags,
-            # -berok will link without error, but may produce a broken library.
-            _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
-            _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
-            # Exported symbols can be pulled into shared objects from archives
-            _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
-            _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
-            # This is similar to how AIX traditionally builds its shared
-            # libraries.
-            _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
-          fi
-        fi
-        ;;
-
-      beos*)
-        if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
-          _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
-          # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
-          # support --undefined.  This deserves some investigation.  FIXME
-          _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-        else
-          _LT_TAGVAR(ld_shlibs, $1)=no
-        fi
-        ;;
-
-      chorus*)
-        case $cc_basename in
-          *)
-          # FIXME: insert proper C++ library support
-          _LT_TAGVAR(ld_shlibs, $1)=no
-          ;;
-        esac
-        ;;
-
-      cygwin* | mingw* | pw32* | cegcc*)
-        # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
-        # as there is no search path for DLLs.
-        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-        _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
-        _LT_TAGVAR(always_export_symbols, $1)=no
-        _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
-
-        if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
-          _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-          # If the export-symbols file already is a .def file (1st line
-          # is EXPORTS), use it as is; otherwise, prepend...
-          _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-            cp $export_symbols $output_objdir/$soname.def;
-          else
-            echo EXPORTS > $output_objdir/$soname.def;
-            cat $export_symbols >> $output_objdir/$soname.def;
-          fi~
-          $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-        else
-          _LT_TAGVAR(ld_shlibs, $1)=no
-        fi
-        ;;
-      darwin* | rhapsody*)
-        _LT_DARWIN_LINKER_FEATURES($1)
-        ;;
-
-      dgux*)
-        case $cc_basename in
-          ec++*)
-            # FIXME: insert proper C++ library support
-            _LT_TAGVAR(ld_shlibs, $1)=no
-            ;;
-          ghcx*)
-            # Green Hills C++ Compiler
-            # FIXME: insert proper C++ library support
-            _LT_TAGVAR(ld_shlibs, $1)=no
-            ;;
-          *)
-            # FIXME: insert proper C++ library support
-            _LT_TAGVAR(ld_shlibs, $1)=no
-            ;;
-        esac
-        ;;
-
-      freebsd[[12]]*)
-        # C++ shared libraries reported to be fairly broken before
-        # switch to ELF
-        _LT_TAGVAR(ld_shlibs, $1)=no
-        ;;
-
-      freebsd-elf*)
-        _LT_TAGVAR(archive_cmds_need_lc, $1)=no
-        ;;
-
-      freebsd* | dragonfly*)
-        # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
-        # conventions
-        _LT_TAGVAR(ld_shlibs, $1)=yes
-        ;;
-
-      gnu*)
-        ;;
-
-      hpux9*)
-        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-        _LT_TAGVAR(hardcode_libdir_separator, $1)=:
-        _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-        _LT_TAGVAR(hardcode_direct, $1)=yes
-        _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
-                                             # but as the default
-                                             # location of the library.
-
-        case $cc_basename in
-          CC*)
-            # FIXME: insert proper C++ library support
-            _LT_TAGVAR(ld_shlibs, $1)=no
-            ;;
-          aCC*)
-            _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-            # Commands to make compiler produce verbose output that lists
-            # what "hidden" libraries, object files and flags are used when
-            # linking a shared library.
-            #
-            # There doesn't appear to be a way to prevent this compiler from
-            # explicitly linking system object files so we need to strip them
-            # from the output so that they don't get included in the library
-            # dependencies.
-            output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
-            ;;
-          *)
-            if test "$GXX" = yes; then
-              _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-            else
-              # FIXME: insert proper C++ library support
-              _LT_TAGVAR(ld_shlibs, $1)=no
-            fi
-            ;;
-        esac
-        ;;
-
-      hpux10*|hpux11*)
-        if test $with_gnu_ld = no; then
-          _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-          _LT_TAGVAR(hardcode_libdir_separator, $1)=:
-
-          case $host_cpu in
-            hppa*64*|ia64*)
-              ;;
-            *)
-              _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-              ;;
-          esac
-        fi
-        case $host_cpu in
-          hppa*64*|ia64*)
-            _LT_TAGVAR(hardcode_direct, $1)=no
-            _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-            ;;
-          *)
-            _LT_TAGVAR(hardcode_direct, $1)=yes
-            _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
-            _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
-                                                 # but as the default
-                                                 # location of the library.
-            ;;
-        esac
-
-        case $cc_basename in
-          CC*)
-            # FIXME: insert proper C++ library support
-            _LT_TAGVAR(ld_shlibs, $1)=no
-            ;;
-          aCC*)
-            case $host_cpu in
-              hppa*64*)
-                _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-                ;;
-              ia64*)
-                _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-                ;;
-              *)
-                _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-                ;;
-            esac
-            # Commands to make compiler produce verbose output that lists
-            # what "hidden" libraries, object files and flags are used when
-            # linking a shared library.
-            #
-            # There doesn't appear to be a way to prevent this compiler from
-            # explicitly linking system object files so we need to strip them
-            # from the output so that they don't get included in the library
-            # dependencies.
-            output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
-            ;;
-          *)
-            if test "$GXX" = yes; then
-              if test $with_gnu_ld = no; then
-                case $host_cpu in
-                  hppa*64*)
-                    _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-                    ;;
-                  ia64*)
-                    _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-                    ;;
-                  *)
-                    _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-                    ;;
-                esac
-              fi
-            else
-              # FIXME: insert proper C++ library support
-              _LT_TAGVAR(ld_shlibs, $1)=no
-            fi
-            ;;
-        esac
-        ;;
-
-      interix[[3-9]]*)
-        _LT_TAGVAR(hardcode_direct, $1)=no
-        _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-        _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-        # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
-        # Instead, shared libraries are loaded at an image base (0x10000000 by
-        # default) and relocated if they conflict, which is a slow very memory
-        # consuming and fragmenting process.  To avoid this, we pick a random,
-        # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
-        # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
-        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-        _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-        ;;
-      irix5* | irix6*)
-        case $cc_basename in
-          CC*)
-            # SGI C++
-            _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
-
-            # Archives containing C++ object files must be created using
-            # "CC -ar", where "CC" is the IRIX C++ compiler.  This is
-            # necessary to make sure instantiated templates are included
-            # in the archive.
-            _LT_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs'
-            ;;
-          *)
-            if test "$GXX" = yes; then
-              if test "$with_gnu_ld" = no; then
-                _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-              else
-                _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` -o $lib'
-              fi
-            fi
-            _LT_TAGVAR(link_all_deplibs, $1)=yes
-            ;;
-        esac
-        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-        _LT_TAGVAR(hardcode_libdir_separator, $1)=:
-        _LT_TAGVAR(inherit_rpath, $1)=yes
-        ;;
-
-      linux* | k*bsd*-gnu | kopensolaris*-gnu)
-        case $cc_basename in
-          KCC*)
-            # Kuck and Associates, Inc. (KAI) C++ Compiler
-
-            # KCC will only create a shared library if the output file
-            # ends with ".so" (or ".sl" for HP-UX), so rename the library
-            # to its proper name (with version) after linking.
-            _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
-            _LT_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
-            # Commands to make compiler produce verbose output that lists
-            # what "hidden" libraries, object files and flags are used when
-            # linking a shared library.
-            #
-            # There doesn't appear to be a way to prevent this compiler from
-            # explicitly linking system object files so we need to strip them
-            # from the output so that they don't get included in the library
-            # dependencies.
-            output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
-
-            _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-            _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-
-            # Archives containing C++ object files must be created using
-            # "CC -Bstatic", where "CC" is the KAI C++ compiler.
-            _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
-            ;;
-          icpc* | ecpc* )
-            # Intel C++
-            with_gnu_ld=yes
-            # version 8.0 and above of icpc choke on multiply defined symbols
-            # if we add $predep_objects and $postdep_objects, however 7.1 and
-            # earlier do not add the objects themselves.
-            case `$CC -V 2>&1` in
-              *"Version 7."*)
-                _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-                _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-                ;;
-              *)  # Version 8.0 or newer
-                tmp_idyn=
-                case $host_cpu in
-                  ia64*) tmp_idyn=' -i_dynamic';;
-                esac
-                _LT_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-                _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-                ;;
-            esac
-            _LT_TAGVAR(archive_cmds_need_lc, $1)=no
-            _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-            _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-            _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
-            ;;
-          pgCC* | pgcpp*)
-            # Portland Group C++ compiler
-            case `$CC -V` in
-            *pgCC\ [[1-5]]* | *pgcpp\ [[1-5]]*)
-              _LT_TAGVAR(prelink_cmds, $1)='tpldir=Template.dir~
-                rm -rf $tpldir~
-                $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~
-                compile_command="$compile_command `find $tpldir -name \*.o | $NL2SP`"'
-              _LT_TAGVAR(old_archive_cmds, $1)='tpldir=Template.dir~
-                rm -rf $tpldir~
-                $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~
-                $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | $NL2SP`~
-                $RANLIB $oldlib'
-              _LT_TAGVAR(archive_cmds, $1)='tpldir=Template.dir~
-                rm -rf $tpldir~
-                $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
-                $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
-              _LT_TAGVAR(archive_expsym_cmds, $1)='tpldir=Template.dir~
-                rm -rf $tpldir~
-                $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
-                $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
-              ;;
-            *) # Version 6 will use weak symbols
-              _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
-              _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
-              ;;
-            esac
-
-            _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
-            _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-            _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
-            ;;
-          cxx*)
-            # Compaq C++
-            _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-            _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname  -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
-
-            runpath_var=LD_RUN_PATH
-            _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
-            _LT_TAGVAR(hardcode_libdir_separator, $1)=:
-
-            # Commands to make compiler produce verbose output that lists
-            # what "hidden" libraries, object files and flags are used when
-            # linking a shared library.
-            #
-            # There doesn't appear to be a way to prevent this compiler from
-            # explicitly linking system object files so we need to strip them
-            # from the output so that they don't get included in the library
-            # dependencies.
-            output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`$ECHO "X$templist" | $Xsed -e "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
-            ;;
-          xl*)
-            # IBM XL 8.0 on PPC, with GNU ld
-            _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-            _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-            _LT_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-            if test "x$supports_anon_versioning" = xyes; then
-              _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
-                cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
-                echo "local: *; };" >> $output_objdir/$libname.ver~
-                $CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
-            fi
-            ;;
-          *)
-            case `$CC -V 2>&1 | sed 5q` in
-            *Sun\ C*)
-              # Sun C++ 5.9
-              _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs'
-              _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-              _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols'
-              _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-              _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
-              _LT_TAGVAR(compiler_needs_object, $1)=yes
-
-              # Not sure whether something based on
-              # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1
-              # would be better.
-              output_verbose_link_cmd='echo'
-
-              # Archives containing C++ object files must be created using
-              # "CC -xar", where "CC" is the Sun C++ compiler.  This is
-              # necessary to make sure instantiated templates are included
-              # in the archive.
-              _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
-              ;;
-            esac
-            ;;
-        esac
-        ;;
-
-      lynxos*)
-        # FIXME: insert proper C++ library support
-        _LT_TAGVAR(ld_shlibs, $1)=no
-        ;;
-
-      m88k*)
-        # FIXME: insert proper C++ library support
-        _LT_TAGVAR(ld_shlibs, $1)=no
-        ;;
-
-      mvs*)
-        case $cc_basename in
-          cxx*)
-            # FIXME: insert proper C++ library support
-            _LT_TAGVAR(ld_shlibs, $1)=no
-            ;;
-          *)
-            # FIXME: insert proper C++ library support
-            _LT_TAGVAR(ld_shlibs, $1)=no
-            ;;
-        esac
-        ;;
-
-      netbsd*)
-        if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
-          _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable  -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
-          wlarc=
-          _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-          _LT_TAGVAR(hardcode_direct, $1)=yes
-          _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-        fi
-        # Workaround some broken pre-1.5 toolchains
-        output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
-        ;;
-
-      *nto* | *qnx*)
-        _LT_TAGVAR(ld_shlibs, $1)=yes
-        ;;
-
-      openbsd2*)
-        # C++ shared libraries are fairly broken
-        _LT_TAGVAR(ld_shlibs, $1)=no
-        ;;
-
-      openbsd*)
-        if test -f /usr/libexec/ld.so; then
-          _LT_TAGVAR(hardcode_direct, $1)=yes
-          _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-          _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
-          _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
-          _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-          if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-            _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib'
-            _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-            _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-          fi
-          output_verbose_link_cmd=echo
-        else
-          _LT_TAGVAR(ld_shlibs, $1)=no
-        fi
-        ;;
-
-      osf3* | osf4* | osf5*)
-        case $cc_basename in
-          KCC*)
-            # Kuck and Associates, Inc. (KAI) C++ Compiler
-
-            # KCC will only create a shared library if the output file
-            # ends with ".so" (or ".sl" for HP-UX), so rename the library
-            # to its proper name (with version) after linking.
-            _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
-
-            _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-            _LT_TAGVAR(hardcode_libdir_separator, $1)=:
-
-            # Archives containing C++ object files must be created using
-            # the KAI C++ compiler.
-            case $host in
-              osf3*) _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' ;;
-              *) _LT_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs' ;;
-            esac
-            ;;
-          RCC*)
-            # Rational C++ 2.4.1
-            # FIXME: insert proper C++ library support
-            _LT_TAGVAR(ld_shlibs, $1)=no
-            ;;
-          cxx*)
-            case $host in
-              osf3*)
-                _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-                _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && $ECHO "X${wl}-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
-                _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-                ;;
-              *)
-                _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
-                _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
-                _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
-                  echo "-hidden">> $lib.exp~
-                  $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp  `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~
-                  $RM $lib.exp'
-                _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
-                ;;
-            esac
-
-            _LT_TAGVAR(hardcode_libdir_separator, $1)=:
-
-            # Commands to make compiler produce verbose output that lists
-            # what "hidden" libraries, object files and flags are used when
-            # linking a shared library.
-            #
-            # There doesn't appear to be a way to prevent this compiler from
-            # explicitly linking system object files so we need to strip them
-            # from the output so that they don't get included in the library
-            # dependencies.
-            output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`$ECHO "X$templist" | $Xsed -e "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
-            ;;
-          *)
-            if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-              _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-              case $host in
-                osf3*)
-                  _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-                  ;;
-                *)
-                  _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-                  ;;
-              esac
-
-              _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-              _LT_TAGVAR(hardcode_libdir_separator, $1)=:
-
-              # Commands to make compiler produce verbose output that lists
-              # what "hidden" libraries, object files and flags are used when
-              # linking a shared library.
-              output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
-
-            else
-              # FIXME: insert proper C++ library support
-              _LT_TAGVAR(ld_shlibs, $1)=no
-            fi
-            ;;
-        esac
-        ;;
-
-      psos*)
-        # FIXME: insert proper C++ library support
-        _LT_TAGVAR(ld_shlibs, $1)=no
-        ;;
-
-      sunos4*)
-        case $cc_basename in
-          CC*)
-            # Sun C++ 4.x
-            # FIXME: insert proper C++ library support
-            _LT_TAGVAR(ld_shlibs, $1)=no
-            ;;
-          lcc*)
-            # Lucid
-            # FIXME: insert proper C++ library support
-            _LT_TAGVAR(ld_shlibs, $1)=no
-            ;;
-          *)
-            # FIXME: insert proper C++ library support
-            _LT_TAGVAR(ld_shlibs, $1)=no
-            ;;
-        esac
-        ;;
-
-      solaris*)
-        case $cc_basename in
-          CC*)
-            # Sun C++ 4.2, 5.x and Centerline C++
-            _LT_TAGVAR(archive_cmds_need_lc,$1)=yes
-            _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs'
-            _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag}  -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-            _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
-              $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
-
-            _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-            _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-            case $host_os in
-              solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
-              *)
-                # The compiler driver will combine and reorder linker options,
-                # but understands `-z linker_flag'.
-                # Supported since Solaris 2.6 (maybe 2.5.1?)
-                _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
-                ;;
-            esac
-            _LT_TAGVAR(link_all_deplibs, $1)=yes
-
-            output_verbose_link_cmd='echo'
-
-            # Archives containing C++ object files must be created using
-            # "CC -xar", where "CC" is the Sun C++ compiler.  This is
-            # necessary to make sure instantiated templates are included
-            # in the archive.
-            _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
-            ;;
-          gcx*)
-            # Green Hills C++ Compiler
-            _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
-
-            # The C++ compiler must be used to create the archive.
-            _LT_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
-            ;;
-          *)
-            # GNU C++ compiler with Solaris linker
-            if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-              _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs'
-              if $CC --version | $GREP -v '^2\.7' > /dev/null; then
-                _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
-                _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
-                  $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
-
-                # Commands to make compiler produce verbose output that lists
-                # what "hidden" libraries, object files and flags are used when
-                # linking a shared library.
-                output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
-              else
-                # g++ 2.7 appears to require `-G' NOT `-shared' on this
-                # platform.
-                _LT_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
-                _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
-                  $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
-
-                # Commands to make compiler produce verbose output that lists
-                # what "hidden" libraries, object files and flags are used when
-                # linking a shared library.
-                output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
-              fi
-
-              _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir'
-              case $host_os in
-                solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
-                *)
-                  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
-                  ;;
-              esac
-            fi
-            ;;
-        esac
-        ;;
-
-    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
-      _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
-      _LT_TAGVAR(archive_cmds_need_lc, $1)=no
-      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-      runpath_var='LD_RUN_PATH'
-
-      case $cc_basename in
-        CC*)
-          _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-          _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-          ;;
-        *)
-          _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-          _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-          ;;
-      esac
-      ;;
-
-      sysv5* | sco3.2v5* | sco5v6*)
-        # Note: We can NOT use -z defs as we might desire, because we do not
-        # link with -lc, and that would cause any symbols used from libc to
-        # always be unresolved, which means just about no library would
-        # ever link correctly.  If we're not using GNU ld we use -z text
-        # though, which does catch some bad symbols but isn't as heavy-handed
-        # as -z defs.
-        _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
-        _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
-        _LT_TAGVAR(archive_cmds_need_lc, $1)=no
-        _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir'
-        _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
-        _LT_TAGVAR(link_all_deplibs, $1)=yes
-        _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
-        runpath_var='LD_RUN_PATH'
-
-        case $cc_basename in
-          CC*)
-            _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-            _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-            ;;
-          *)
-            _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-            _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-            ;;
-        esac
-      ;;
-
-      tandem*)
-        case $cc_basename in
-          NCC*)
-            # NonStop-UX NCC 3.20
-            # FIXME: insert proper C++ library support
-            _LT_TAGVAR(ld_shlibs, $1)=no
-            ;;
-          *)
-            # FIXME: insert proper C++ library support
-            _LT_TAGVAR(ld_shlibs, $1)=no
-            ;;
-        esac
-        ;;
-
-      vxworks*)
-        # FIXME: insert proper C++ library support
-        _LT_TAGVAR(ld_shlibs, $1)=no
-        ;;
-
-      *)
-        # FIXME: insert proper C++ library support
-        _LT_TAGVAR(ld_shlibs, $1)=no
-        ;;
-    esac
-
-    AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)])
-    test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
-
-    _LT_TAGVAR(GCC, $1)="$GXX"
-    _LT_TAGVAR(LD, $1)="$LD"
-
-    ## CAVEAT EMPTOR:
-    ## There is no encapsulation within the following macros, do not change
-    ## the running order or otherwise move them around unless you know exactly
-    ## what you are doing...
-    _LT_SYS_HIDDEN_LIBDEPS($1)
-    _LT_COMPILER_PIC($1)
-    _LT_COMPILER_C_O($1)
-    _LT_COMPILER_FILE_LOCKS($1)
-    _LT_LINKER_SHLIBS($1)
-    _LT_SYS_DYNAMIC_LINKER($1)
-    _LT_LINKER_HARDCODE_LIBPATH($1)
-
-    _LT_CONFIG($1)
-  fi # test -n "$compiler"
-
-  CC=$lt_save_CC
-  LDCXX=$LD
-  LD=$lt_save_LD
-  GCC=$lt_save_GCC
-  with_gnu_ld=$lt_save_with_gnu_ld
-  lt_cv_path_LDCXX=$lt_cv_path_LD
-  lt_cv_path_LD=$lt_save_path_LD
-  lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
-  lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
-fi # test "$_lt_caught_CXX_error" != yes
-
-AC_LANG_POP
-])# _LT_LANG_CXX_CONFIG
-
-
-# _LT_SYS_HIDDEN_LIBDEPS([TAGNAME])
-# ---------------------------------
-# Figure out "hidden" library dependencies from verbose
-# compiler output when linking a shared library.
-# Parse the compiler output and extract the necessary
-# objects, libraries and library flags.
-m4_defun([_LT_SYS_HIDDEN_LIBDEPS],
-[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
-# Dependencies to place before and after the object being linked:
-_LT_TAGVAR(predep_objects, $1)=
-_LT_TAGVAR(postdep_objects, $1)=
-_LT_TAGVAR(predeps, $1)=
-_LT_TAGVAR(postdeps, $1)=
-_LT_TAGVAR(compiler_lib_search_path, $1)=
-
-dnl we can't use the lt_simple_compile_test_code here,
-dnl because it contains code intended for an executable,
-dnl not a library.  It's possible we should let each
-dnl tag define a new lt_????_link_test_code variable,
-dnl but it's only used here...
-m4_if([$1], [], [cat > conftest.$ac_ext <<_LT_EOF
-int a;
-void foo (void) { a = 0; }
-_LT_EOF
-], [$1], [CXX], [cat > conftest.$ac_ext <<_LT_EOF
-class Foo
-{
-public:
-  Foo (void) { a = 0; }
-private:
-  int a;
-};
-_LT_EOF
-], [$1], [F77], [cat > conftest.$ac_ext <<_LT_EOF
-      subroutine foo
-      implicit none
-      integer*4 a
-      a=0
-      return
-      end
-_LT_EOF
-], [$1], [FC], [cat > conftest.$ac_ext <<_LT_EOF
-      subroutine foo
-      implicit none
-      integer a
-      a=0
-      return
-      end
-_LT_EOF
-], [$1], [GCJ], [cat > conftest.$ac_ext <<_LT_EOF
-public class foo {
-  private int a;
-  public void bar (void) {
-    a = 0;
-  }
-};
-_LT_EOF
-])
-dnl Parse the compiler output and extract the necessary
-dnl objects, libraries and library flags.
-if AC_TRY_EVAL(ac_compile); then
-  # Parse the compiler output and extract the necessary
-  # objects, libraries and library flags.
-
-  # Sentinel used to keep track of whether or not we are before
-  # the conftest object file.
-  pre_test_object_deps_done=no
-
-  for p in `eval "$output_verbose_link_cmd"`; do
-    case $p in
-
-    -L* | -R* | -l*)
-       # Some compilers place space between "-{L,R}" and the path.
-       # Remove the space.
-       if test $p = "-L" ||
-          test $p = "-R"; then
-         prev=$p
-         continue
-       else
-         prev=
-       fi
-
-       if test "$pre_test_object_deps_done" = no; then
-         case $p in
-         -L* | -R*)
-           # Internal compiler library paths should come after those
-           # provided the user.  The postdeps already come after the
-           # user supplied libs so there is no need to process them.
-           if test -z "$_LT_TAGVAR(compiler_lib_search_path, $1)"; then
-             _LT_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}"
-           else
-             _LT_TAGVAR(compiler_lib_search_path, $1)="${_LT_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}"
-           fi
-           ;;
-         # The "-l" case would never come before the object being
-         # linked, so don't bother handling this case.
-         esac
-       else
-         if test -z "$_LT_TAGVAR(postdeps, $1)"; then
-           _LT_TAGVAR(postdeps, $1)="${prev}${p}"
-         else
-           _LT_TAGVAR(postdeps, $1)="${_LT_TAGVAR(postdeps, $1)} ${prev}${p}"
-         fi
-       fi
-       ;;
-
-    *.$objext)
-       # This assumes that the test object file only shows up
-       # once in the compiler output.
-       if test "$p" = "conftest.$objext"; then
-         pre_test_object_deps_done=yes
-         continue
-       fi
-
-       if test "$pre_test_object_deps_done" = no; then
-         if test -z "$_LT_TAGVAR(predep_objects, $1)"; then
-           _LT_TAGVAR(predep_objects, $1)="$p"
-         else
-           _LT_TAGVAR(predep_objects, $1)="$_LT_TAGVAR(predep_objects, $1) $p"
-         fi
-       else
-         if test -z "$_LT_TAGVAR(postdep_objects, $1)"; then
-           _LT_TAGVAR(postdep_objects, $1)="$p"
-         else
-           _LT_TAGVAR(postdep_objects, $1)="$_LT_TAGVAR(postdep_objects, $1) $p"
-         fi
-       fi
-       ;;
-
-    *) ;; # Ignore the rest.
-
-    esac
-  done
-
-  # Clean up.
-  rm -f a.out a.exe
-else
-  echo "libtool.m4: error: problem compiling $1 test program"
-fi
-
-$RM -f confest.$objext
-
-# PORTME: override above test on systems where it is broken
-m4_if([$1], [CXX],
-[case $host_os in
-interix[[3-9]]*)
-  # Interix 3.5 installs completely hosed .la files for C++, so rather than
-  # hack all around it, let's just trust "g++" to DTRT.
-  _LT_TAGVAR(predep_objects,$1)=
-  _LT_TAGVAR(postdep_objects,$1)=
-  _LT_TAGVAR(postdeps,$1)=
-  ;;
-
-linux*)
-  case `$CC -V 2>&1 | sed 5q` in
-  *Sun\ C*)
-    # Sun C++ 5.9
-
-    # The more standards-conforming stlport4 library is
-    # incompatible with the Cstd library. Avoid specifying
-    # it if it's in CXXFLAGS. Ignore libCrun as
-    # -library=stlport4 depends on it.
-    case " $CXX $CXXFLAGS " in
-    *" -library=stlport4 "*)
-      solaris_use_stlport4=yes
-      ;;
-    esac
-
-    if test "$solaris_use_stlport4" != yes; then
-      _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun'
-    fi
-    ;;
-  esac
-  ;;
-
-solaris*)
-  case $cc_basename in
-  CC*)
-    # The more standards-conforming stlport4 library is
-    # incompatible with the Cstd library. Avoid specifying
-    # it if it's in CXXFLAGS. Ignore libCrun as
-    # -library=stlport4 depends on it.
-    case " $CXX $CXXFLAGS " in
-    *" -library=stlport4 "*)
-      solaris_use_stlport4=yes
-      ;;
-    esac
-
-    # Adding this requires a known-good setup of shared libraries for
-    # Sun compiler versions before 5.6, else PIC objects from an old
-    # archive will be linked into the output, leading to subtle bugs.
-    if test "$solaris_use_stlport4" != yes; then
-      _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun'
-    fi
-    ;;
-  esac
-  ;;
-esac
-])
-
-case " $_LT_TAGVAR(postdeps, $1) " in
-*" -lc "*) _LT_TAGVAR(archive_cmds_need_lc, $1)=no ;;
-esac
- _LT_TAGVAR(compiler_lib_search_dirs, $1)=
-if test -n "${_LT_TAGVAR(compiler_lib_search_path, $1)}"; then
- _LT_TAGVAR(compiler_lib_search_dirs, $1)=`echo " ${_LT_TAGVAR(compiler_lib_search_path, $1)}" | ${SED} -e 's! -L! !g' -e 's!^ !!'`
-fi
-_LT_TAGDECL([], [compiler_lib_search_dirs], [1],
-    [The directories searched by this compiler when creating a shared library])
-_LT_TAGDECL([], [predep_objects], [1],
-    [Dependencies to place before and after the objects being linked to
-    create a shared library])
-_LT_TAGDECL([], [postdep_objects], [1])
-_LT_TAGDECL([], [predeps], [1])
-_LT_TAGDECL([], [postdeps], [1])
-_LT_TAGDECL([], [compiler_lib_search_path], [1],
-    [The library search path used internally by the compiler when linking
-    a shared library])
-])# _LT_SYS_HIDDEN_LIBDEPS
-
-
-# _LT_PROG_F77
-# ------------
-# Since AC_PROG_F77 is broken, in that it returns the empty string
-# if there is no fortran compiler, we have our own version here.
-m4_defun([_LT_PROG_F77],
-[
-pushdef([AC_MSG_ERROR], [_lt_disable_F77=yes])
-AC_PROG_F77
-if test -z "$F77" || test "X$F77" = "Xno"; then
-  _lt_disable_F77=yes
-fi
-popdef([AC_MSG_ERROR])
-])# _LT_PROG_F77
-
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([_LT_PROG_F77], [])
-
-
-# _LT_LANG_F77_CONFIG([TAG])
-# --------------------------
-# Ensure that the configuration variables for a Fortran 77 compiler are
-# suitably defined.  These variables are subsequently used by _LT_CONFIG
-# to write the compiler configuration to `libtool'.
-m4_defun([_LT_LANG_F77_CONFIG],
-[AC_REQUIRE([_LT_PROG_F77])dnl
-AC_LANG_PUSH(Fortran 77)
-
-_LT_TAGVAR(archive_cmds_need_lc, $1)=no
-_LT_TAGVAR(allow_undefined_flag, $1)=
-_LT_TAGVAR(always_export_symbols, $1)=no
-_LT_TAGVAR(archive_expsym_cmds, $1)=
-_LT_TAGVAR(export_dynamic_flag_spec, $1)=
-_LT_TAGVAR(hardcode_direct, $1)=no
-_LT_TAGVAR(hardcode_direct_absolute, $1)=no
-_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
-_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
-_LT_TAGVAR(hardcode_libdir_separator, $1)=
-_LT_TAGVAR(hardcode_minus_L, $1)=no
-_LT_TAGVAR(hardcode_automatic, $1)=no
-_LT_TAGVAR(inherit_rpath, $1)=no
-_LT_TAGVAR(module_cmds, $1)=
-_LT_TAGVAR(module_expsym_cmds, $1)=
-_LT_TAGVAR(link_all_deplibs, $1)=unknown
-_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
-_LT_TAGVAR(no_undefined_flag, $1)=
-_LT_TAGVAR(whole_archive_flag_spec, $1)=
-_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
-
-# Source file extension for f77 test sources.
-ac_ext=f
-
-# Object file extension for compiled f77 test sources.
-objext=o
-_LT_TAGVAR(objext, $1)=$objext
-
-# No sense in running all these tests if we already determined that
-# the F77 compiler isn't working.  Some variables (like enable_shared)
-# are currently assumed to apply to all compilers on this platform,
-# and will be corrupted by setting them based on a non-working compiler.
-if test "$_lt_disable_F77" != yes; then
-  # Code to be used in simple compile tests
-  lt_simple_compile_test_code="\
-      subroutine t
-      return
-      end
-"
-
-  # Code to be used in simple link tests
-  lt_simple_link_test_code="\
-      program t
-      end
-"
-
-  # ltmain only uses $CC for tagged configurations so make sure $CC is set.
-  _LT_TAG_COMPILER
-
-  # save warnings/boilerplate of simple test code
-  _LT_COMPILER_BOILERPLATE
-  _LT_LINKER_BOILERPLATE
-
-  # Allow CC to be a program name with arguments.
-  lt_save_CC="$CC"
-  lt_save_GCC=$GCC
-  CC=${F77-"f77"}
-  compiler=$CC
-  _LT_TAGVAR(compiler, $1)=$CC
-  _LT_CC_BASENAME([$compiler])
-  GCC=$G77
-  if test -n "$compiler"; then
-    AC_MSG_CHECKING([if libtool supports shared libraries])
-    AC_MSG_RESULT([$can_build_shared])
-
-    AC_MSG_CHECKING([whether to build shared libraries])
-    test "$can_build_shared" = "no" && enable_shared=no
-
-    # On AIX, shared libraries and static libraries use the same namespace, and
-    # are all built from PIC.
-    case $host_os in
-      aix3*)
-        test "$enable_shared" = yes && enable_static=no
-        if test -n "$RANLIB"; then
-          archive_cmds="$archive_cmds~\$RANLIB \$lib"
-          postinstall_cmds='$RANLIB $lib'
-        fi
-        ;;
-      aix[[4-9]]*)
-        if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
-          test "$enable_shared" = yes && enable_static=no
-        fi
-        ;;
-    esac
-    AC_MSG_RESULT([$enable_shared])
-
-    AC_MSG_CHECKING([whether to build static libraries])
-    # Make sure either enable_shared or enable_static is yes.
-    test "$enable_shared" = yes || enable_static=yes
-    AC_MSG_RESULT([$enable_static])
-
-    _LT_TAGVAR(GCC, $1)="$G77"
-    _LT_TAGVAR(LD, $1)="$LD"
-
-    ## CAVEAT EMPTOR:
-    ## There is no encapsulation within the following macros, do not change
-    ## the running order or otherwise move them around unless you know exactly
-    ## what you are doing...
-    _LT_COMPILER_PIC($1)
-    _LT_COMPILER_C_O($1)
-    _LT_COMPILER_FILE_LOCKS($1)
-    _LT_LINKER_SHLIBS($1)
-    _LT_SYS_DYNAMIC_LINKER($1)
-    _LT_LINKER_HARDCODE_LIBPATH($1)
-
-    _LT_CONFIG($1)
-  fi # test -n "$compiler"
-
-  GCC=$lt_save_GCC
-  CC="$lt_save_CC"
-fi # test "$_lt_disable_F77" != yes
-
-AC_LANG_POP
-])# _LT_LANG_F77_CONFIG
-
-
-# _LT_PROG_FC
-# -----------
-# Since AC_PROG_FC is broken, in that it returns the empty string
-# if there is no fortran compiler, we have our own version here.
-m4_defun([_LT_PROG_FC],
-[
-pushdef([AC_MSG_ERROR], [_lt_disable_FC=yes])
-AC_PROG_FC
-if test -z "$FC" || test "X$FC" = "Xno"; then
-  _lt_disable_FC=yes
-fi
-popdef([AC_MSG_ERROR])
-])# _LT_PROG_FC
-
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([_LT_PROG_FC], [])
-
-
-# _LT_LANG_FC_CONFIG([TAG])
-# -------------------------
-# Ensure that the configuration variables for a Fortran compiler are
-# suitably defined.  These variables are subsequently used by _LT_CONFIG
-# to write the compiler configuration to `libtool'.
-m4_defun([_LT_LANG_FC_CONFIG],
-[AC_REQUIRE([_LT_PROG_FC])dnl
-AC_LANG_PUSH(Fortran)
-
-_LT_TAGVAR(archive_cmds_need_lc, $1)=no
-_LT_TAGVAR(allow_undefined_flag, $1)=
-_LT_TAGVAR(always_export_symbols, $1)=no
-_LT_TAGVAR(archive_expsym_cmds, $1)=
-_LT_TAGVAR(export_dynamic_flag_spec, $1)=
-_LT_TAGVAR(hardcode_direct, $1)=no
-_LT_TAGVAR(hardcode_direct_absolute, $1)=no
-_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
-_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
-_LT_TAGVAR(hardcode_libdir_separator, $1)=
-_LT_TAGVAR(hardcode_minus_L, $1)=no
-_LT_TAGVAR(hardcode_automatic, $1)=no
-_LT_TAGVAR(inherit_rpath, $1)=no
-_LT_TAGVAR(module_cmds, $1)=
-_LT_TAGVAR(module_expsym_cmds, $1)=
-_LT_TAGVAR(link_all_deplibs, $1)=unknown
-_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
-_LT_TAGVAR(no_undefined_flag, $1)=
-_LT_TAGVAR(whole_archive_flag_spec, $1)=
-_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
-
-# Source file extension for fc test sources.
-ac_ext=${ac_fc_srcext-f}
-
-# Object file extension for compiled fc test sources.
-objext=o
-_LT_TAGVAR(objext, $1)=$objext
-
-# No sense in running all these tests if we already determined that
-# the FC compiler isn't working.  Some variables (like enable_shared)
-# are currently assumed to apply to all compilers on this platform,
-# and will be corrupted by setting them based on a non-working compiler.
-if test "$_lt_disable_FC" != yes; then
-  # Code to be used in simple compile tests
-  lt_simple_compile_test_code="\
-      subroutine t
-      return
-      end
-"
-
-  # Code to be used in simple link tests
-  lt_simple_link_test_code="\
-      program t
-      end
-"
-
-  # ltmain only uses $CC for tagged configurations so make sure $CC is set.
-  _LT_TAG_COMPILER
-
-  # save warnings/boilerplate of simple test code
-  _LT_COMPILER_BOILERPLATE
-  _LT_LINKER_BOILERPLATE
-
-  # Allow CC to be a program name with arguments.
-  lt_save_CC="$CC"
-  lt_save_GCC=$GCC
-  CC=${FC-"f95"}
-  compiler=$CC
-  GCC=$ac_cv_fc_compiler_gnu
-
-  _LT_TAGVAR(compiler, $1)=$CC
-  _LT_CC_BASENAME([$compiler])
-
-  if test -n "$compiler"; then
-    AC_MSG_CHECKING([if libtool supports shared libraries])
-    AC_MSG_RESULT([$can_build_shared])
-
-    AC_MSG_CHECKING([whether to build shared libraries])
-    test "$can_build_shared" = "no" && enable_shared=no
-
-    # On AIX, shared libraries and static libraries use the same namespace, and
-    # are all built from PIC.
-    case $host_os in
-      aix3*)
-        test "$enable_shared" = yes && enable_static=no
-        if test -n "$RANLIB"; then
-          archive_cmds="$archive_cmds~\$RANLIB \$lib"
-          postinstall_cmds='$RANLIB $lib'
-        fi
-        ;;
-      aix[[4-9]]*)
-        if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
-          test "$enable_shared" = yes && enable_static=no
-        fi
-        ;;
-    esac
-    AC_MSG_RESULT([$enable_shared])
-
-    AC_MSG_CHECKING([whether to build static libraries])
-    # Make sure either enable_shared or enable_static is yes.
-    test "$enable_shared" = yes || enable_static=yes
-    AC_MSG_RESULT([$enable_static])
-
-    _LT_TAGVAR(GCC, $1)="$ac_cv_fc_compiler_gnu"
-    _LT_TAGVAR(LD, $1)="$LD"
-
-    ## CAVEAT EMPTOR:
-    ## There is no encapsulation within the following macros, do not change
-    ## the running order or otherwise move them around unless you know exactly
-    ## what you are doing...
-    _LT_SYS_HIDDEN_LIBDEPS($1)
-    _LT_COMPILER_PIC($1)
-    _LT_COMPILER_C_O($1)
-    _LT_COMPILER_FILE_LOCKS($1)
-    _LT_LINKER_SHLIBS($1)
-    _LT_SYS_DYNAMIC_LINKER($1)
-    _LT_LINKER_HARDCODE_LIBPATH($1)
-
-    _LT_CONFIG($1)
-  fi # test -n "$compiler"
-
-  GCC=$lt_save_GCC
-  CC="$lt_save_CC"
-fi # test "$_lt_disable_FC" != yes
-
-AC_LANG_POP
-])# _LT_LANG_FC_CONFIG
-
-
-# _LT_LANG_GCJ_CONFIG([TAG])
-# --------------------------
-# Ensure that the configuration variables for the GNU Java Compiler compiler
-# are suitably defined.  These variables are subsequently used by _LT_CONFIG
-# to write the compiler configuration to `libtool'.
-m4_defun([_LT_LANG_GCJ_CONFIG],
-[AC_REQUIRE([LT_PROG_GCJ])dnl
-AC_LANG_SAVE
-
-# Source file extension for Java test sources.
-ac_ext=java
-
-# Object file extension for compiled Java test sources.
-objext=o
-_LT_TAGVAR(objext, $1)=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code="class foo {}"
-
-# Code to be used in simple link tests
-lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }'
-
-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-_LT_TAG_COMPILER
-
-# save warnings/boilerplate of simple test code
-_LT_COMPILER_BOILERPLATE
-_LT_LINKER_BOILERPLATE
-
-# Allow CC to be a program name with arguments.
-lt_save_CC="$CC"
-lt_save_GCC=$GCC
-GCC=yes
-CC=${GCJ-"gcj"}
-compiler=$CC
-_LT_TAGVAR(compiler, $1)=$CC
-_LT_TAGVAR(LD, $1)="$LD"
-_LT_CC_BASENAME([$compiler])
-
-# GCJ did not exist at the time GCC didn't implicitly link libc in.
-_LT_TAGVAR(archive_cmds_need_lc, $1)=no
-
-_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
-
-## CAVEAT EMPTOR:
-## There is no encapsulation within the following macros, do not change
-## the running order or otherwise move them around unless you know exactly
-## what you are doing...
-if test -n "$compiler"; then
-  _LT_COMPILER_NO_RTTI($1)
-  _LT_COMPILER_PIC($1)
-  _LT_COMPILER_C_O($1)
-  _LT_COMPILER_FILE_LOCKS($1)
-  _LT_LINKER_SHLIBS($1)
-  _LT_LINKER_HARDCODE_LIBPATH($1)
-
-  _LT_CONFIG($1)
-fi
-
-AC_LANG_RESTORE
-
-GCC=$lt_save_GCC
-CC="$lt_save_CC"
-])# _LT_LANG_GCJ_CONFIG
-
-
-# _LT_LANG_RC_CONFIG([TAG])
-# -------------------------
-# Ensure that the configuration variables for the Windows resource compiler
-# are suitably defined.  These variables are subsequently used by _LT_CONFIG
-# to write the compiler configuration to `libtool'.
-m4_defun([_LT_LANG_RC_CONFIG],
-[AC_REQUIRE([LT_PROG_RC])dnl
-AC_LANG_SAVE
-
-# Source file extension for RC test sources.
-ac_ext=rc
-
-# Object file extension for compiled RC test sources.
-objext=o
-_LT_TAGVAR(objext, $1)=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }'
-
-# Code to be used in simple link tests
-lt_simple_link_test_code="$lt_simple_compile_test_code"
-
-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-_LT_TAG_COMPILER
-
-# save warnings/boilerplate of simple test code
-_LT_COMPILER_BOILERPLATE
-_LT_LINKER_BOILERPLATE
-
-# Allow CC to be a program name with arguments.
-lt_save_CC="$CC"
-lt_save_GCC=$GCC
-GCC=
-CC=${RC-"windres"}
-compiler=$CC
-_LT_TAGVAR(compiler, $1)=$CC
-_LT_CC_BASENAME([$compiler])
-_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
-
-if test -n "$compiler"; then
-  :
-  _LT_CONFIG($1)
-fi
-
-GCC=$lt_save_GCC
-AC_LANG_RESTORE
-CC="$lt_save_CC"
-])# _LT_LANG_RC_CONFIG
-
-
-# LT_PROG_GCJ
-# -----------
-AC_DEFUN([LT_PROG_GCJ],
-[m4_ifdef([AC_PROG_GCJ], [AC_PROG_GCJ],
-  [m4_ifdef([A][M_PROG_GCJ], [A][M_PROG_GCJ],
-    [AC_CHECK_TOOL(GCJ, gcj,)
-      test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2"
-      AC_SUBST(GCJFLAGS)])])[]dnl
-])
-
-# Old name:
-AU_ALIAS([LT_AC_PROG_GCJ], [LT_PROG_GCJ])
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([LT_AC_PROG_GCJ], [])
-
-
-# LT_PROG_RC
-# ----------
-AC_DEFUN([LT_PROG_RC],
-[AC_CHECK_TOOL(RC, windres,)
-])
-
-# Old name:
-AU_ALIAS([LT_AC_PROG_RC], [LT_PROG_RC])
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([LT_AC_PROG_RC], [])
-
-
-# _LT_DECL_EGREP
-# --------------
-# If we don't have a new enough Autoconf to choose the best grep
-# available, choose the one first in the user's PATH.
-m4_defun([_LT_DECL_EGREP],
-[AC_REQUIRE([AC_PROG_EGREP])dnl
-AC_REQUIRE([AC_PROG_FGREP])dnl
-test -z "$GREP" && GREP=grep
-_LT_DECL([], [GREP], [1], [A grep program that handles long lines])
-_LT_DECL([], [EGREP], [1], [An ERE matcher])
-_LT_DECL([], [FGREP], [1], [A literal string matcher])
-dnl Non-bleeding-edge autoconf doesn't subst GREP, so do it here too
-AC_SUBST([GREP])
-])
-
-
-# _LT_DECL_OBJDUMP
-# --------------
-# If we don't have a new enough Autoconf to choose the best objdump
-# available, choose the one first in the user's PATH.
-m4_defun([_LT_DECL_OBJDUMP],
-[AC_CHECK_TOOL(OBJDUMP, objdump, false)
-test -z "$OBJDUMP" && OBJDUMP=objdump
-_LT_DECL([], [OBJDUMP], [1], [An object symbol dumper])
-AC_SUBST([OBJDUMP])
-])
-
-
-# _LT_DECL_SED
-# ------------
-# Check for a fully-functional sed program, that truncates
-# as few characters as possible.  Prefer GNU sed if found.
-m4_defun([_LT_DECL_SED],
-[AC_PROG_SED
-test -z "$SED" && SED=sed
-Xsed="$SED -e 1s/^X//"
-_LT_DECL([], [SED], [1], [A sed program that does not truncate output])
-_LT_DECL([], [Xsed], ["\$SED -e 1s/^X//"],
-    [Sed that helps us avoid accidentally triggering echo(1) options like -n])
-])# _LT_DECL_SED
-
-m4_ifndef([AC_PROG_SED], [
-############################################################
-# NOTE: This macro has been submitted for inclusion into   #
-#  GNU Autoconf as AC_PROG_SED.  When it is available in   #
-#  a released version of Autoconf we should remove this    #
-#  macro and use it instead.                               #
-############################################################
-
-m4_defun([AC_PROG_SED],
-[AC_MSG_CHECKING([for a sed that does not truncate output])
-AC_CACHE_VAL(lt_cv_path_SED,
-[# Loop through the user's path and test for sed and gsed.
-# Then use that list of sed's as ones to test for truncation.
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for lt_ac_prog in sed gsed; do
-    for ac_exec_ext in '' $ac_executable_extensions; do
-      if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then
-        lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext"
-      fi
-    done
-  done
-done
-IFS=$as_save_IFS
-lt_ac_max=0
-lt_ac_count=0
-# Add /usr/xpg4/bin/sed as it is typically found on Solaris
-# along with /bin/sed that truncates output.
-for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
-  test ! -f $lt_ac_sed && continue
-  cat /dev/null > conftest.in
-  lt_ac_count=0
-  echo $ECHO_N "0123456789$ECHO_C" >conftest.in
-  # Check for GNU sed and select it if it is found.
-  if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then
-    lt_cv_path_SED=$lt_ac_sed
-    break
-  fi
-  while true; do
-    cat conftest.in conftest.in >conftest.tmp
-    mv conftest.tmp conftest.in
-    cp conftest.in conftest.nl
-    echo >>conftest.nl
-    $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break
-    cmp -s conftest.out conftest.nl || break
-    # 10000 chars as input seems more than enough
-    test $lt_ac_count -gt 10 && break
-    lt_ac_count=`expr $lt_ac_count + 1`
-    if test $lt_ac_count -gt $lt_ac_max; then
-      lt_ac_max=$lt_ac_count
-      lt_cv_path_SED=$lt_ac_sed
-    fi
-  done
-done
-])
-SED=$lt_cv_path_SED
-AC_SUBST([SED])
-AC_MSG_RESULT([$SED])
-])#AC_PROG_SED
-])#m4_ifndef
-
-# Old name:
-AU_ALIAS([LT_AC_PROG_SED], [AC_PROG_SED])
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([LT_AC_PROG_SED], [])
-
-
-# _LT_CHECK_SHELL_FEATURES
-# ------------------------
-# Find out whether the shell is Bourne or XSI compatible,
-# or has some other useful features.
-m4_defun([_LT_CHECK_SHELL_FEATURES],
-[AC_MSG_CHECKING([whether the shell understands some XSI constructs])
-# Try some XSI features
-xsi_shell=no
-( _lt_dummy="a/b/c"
-  test "${_lt_dummy##*/},${_lt_dummy%/*},"${_lt_dummy%"$_lt_dummy"}, \
-      = c,a/b,, \
-    && eval 'test $(( 1 + 1 )) -eq 2 \
-    && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
-  && xsi_shell=yes
-AC_MSG_RESULT([$xsi_shell])
-_LT_CONFIG_LIBTOOL_INIT([xsi_shell='$xsi_shell'])
-
-AC_MSG_CHECKING([whether the shell understands "+="])
-lt_shell_append=no
-( foo=bar; set foo baz; eval "$[1]+=\$[2]" && test "$foo" = barbaz ) \
-    >/dev/null 2>&1 \
-  && lt_shell_append=yes
-AC_MSG_RESULT([$lt_shell_append])
-_LT_CONFIG_LIBTOOL_INIT([lt_shell_append='$lt_shell_append'])
-
-if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
-  lt_unset=unset
-else
-  lt_unset=false
-fi
-_LT_DECL([], [lt_unset], [0], [whether the shell understands "unset"])dnl
-
-# test EBCDIC or ASCII
-case `echo X|tr X '\101'` in
- A) # ASCII based system
-    # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
-  lt_SP2NL='tr \040 \012'
-  lt_NL2SP='tr \015\012 \040\040'
-  ;;
- *) # EBCDIC based system
-  lt_SP2NL='tr \100 \n'
-  lt_NL2SP='tr \r\n \100\100'
-  ;;
-esac
-_LT_DECL([SP2NL], [lt_SP2NL], [1], [turn spaces into newlines])dnl
-_LT_DECL([NL2SP], [lt_NL2SP], [1], [turn newlines into spaces])dnl
-])# _LT_CHECK_SHELL_FEATURES
-
-
-# _LT_PROG_XSI_SHELLFNS
-# ---------------------
-# Bourne and XSI compatible variants of some useful shell functions.
-m4_defun([_LT_PROG_XSI_SHELLFNS],
-[case $xsi_shell in
-  yes)
-    cat << \_LT_EOF >> "$cfgfile"
-
-# func_dirname file append nondir_replacement
-# Compute the dirname of FILE.  If nonempty, add APPEND to the result,
-# otherwise set result to NONDIR_REPLACEMENT.
-func_dirname ()
-{
-  case ${1} in
-    */*) func_dirname_result="${1%/*}${2}" ;;
-    *  ) func_dirname_result="${3}" ;;
-  esac
-}
-
-# func_basename file
-func_basename ()
-{
-  func_basename_result="${1##*/}"
-}
-
-# func_dirname_and_basename file append nondir_replacement
-# perform func_basename and func_dirname in a single function
-# call:
-#   dirname:  Compute the dirname of FILE.  If nonempty,
-#             add APPEND to the result, otherwise set result
-#             to NONDIR_REPLACEMENT.
-#             value returned in "$func_dirname_result"
-#   basename: Compute filename of FILE.
-#             value retuned in "$func_basename_result"
-# Implementation must be kept synchronized with func_dirname
-# and func_basename. For efficiency, we do not delegate to
-# those functions but instead duplicate the functionality here.
-func_dirname_and_basename ()
-{
-  case ${1} in
-    */*) func_dirname_result="${1%/*}${2}" ;;
-    *  ) func_dirname_result="${3}" ;;
-  esac
-  func_basename_result="${1##*/}"
-}
-
-# func_stripname prefix suffix name
-# strip PREFIX and SUFFIX off of NAME.
-# PREFIX and SUFFIX must not contain globbing or regex special
-# characters, hashes, percent signs, but SUFFIX may contain a leading
-# dot (in which case that matches only a dot).
-func_stripname ()
-{
-  # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are
-  # positional parameters, so assign one to ordinary parameter first.
-  func_stripname_result=${3}
-  func_stripname_result=${func_stripname_result#"${1}"}
-  func_stripname_result=${func_stripname_result%"${2}"}
-}
-
-# func_opt_split
-func_opt_split ()
-{
-  func_opt_split_opt=${1%%=*}
-  func_opt_split_arg=${1#*=}
-}
-
-# func_lo2o object
-func_lo2o ()
-{
-  case ${1} in
-    *.lo) func_lo2o_result=${1%.lo}.${objext} ;;
-    *)    func_lo2o_result=${1} ;;
-  esac
-}
-
-# func_xform libobj-or-source
-func_xform ()
-{
-  func_xform_result=${1%.*}.lo
-}
-
-# func_arith arithmetic-term...
-func_arith ()
-{
-  func_arith_result=$(( $[*] ))
-}
-
-# func_len string
-# STRING may not start with a hyphen.
-func_len ()
-{
-  func_len_result=${#1}
-}
-
-_LT_EOF
-    ;;
-  *) # Bourne compatible functions.
-    cat << \_LT_EOF >> "$cfgfile"
-
-# func_dirname file append nondir_replacement
-# Compute the dirname of FILE.  If nonempty, add APPEND to the result,
-# otherwise set result to NONDIR_REPLACEMENT.
-func_dirname ()
-{
-  # Extract subdirectory from the argument.
-  func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"`
-  if test "X$func_dirname_result" = "X${1}"; then
-    func_dirname_result="${3}"
-  else
-    func_dirname_result="$func_dirname_result${2}"
-  fi
-}
-
-# func_basename file
-func_basename ()
-{
-  func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"`
-}
-
-dnl func_dirname_and_basename
-dnl A portable version of this function is already defined in general.m4sh
-dnl so there is no need for it here.
-
-# func_stripname prefix suffix name
-# strip PREFIX and SUFFIX off of NAME.
-# PREFIX and SUFFIX must not contain globbing or regex special
-# characters, hashes, percent signs, but SUFFIX may contain a leading
-# dot (in which case that matches only a dot).
-# func_strip_suffix prefix name
-func_stripname ()
-{
-  case ${2} in
-    .*) func_stripname_result=`$ECHO "X${3}" \
-           | $Xsed -e "s%^${1}%%" -e "s%\\\\${2}\$%%"`;;
-    *)  func_stripname_result=`$ECHO "X${3}" \
-           | $Xsed -e "s%^${1}%%" -e "s%${2}\$%%"`;;
-  esac
-}
-
-# sed scripts:
-my_sed_long_opt='1s/^\(-[[^=]]*\)=.*/\1/;q'
-my_sed_long_arg='1s/^-[[^=]]*=//'
-
-# func_opt_split
-func_opt_split ()
-{
-  func_opt_split_opt=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_opt"`
-  func_opt_split_arg=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_arg"`
-}
-
-# func_lo2o object
-func_lo2o ()
-{
-  func_lo2o_result=`$ECHO "X${1}" | $Xsed -e "$lo2o"`
-}
-
-# func_xform libobj-or-source
-func_xform ()
-{
-  func_xform_result=`$ECHO "X${1}" | $Xsed -e 's/\.[[^.]]*$/.lo/'`
-}
-
-# func_arith arithmetic-term...
-func_arith ()
-{
-  func_arith_result=`expr "$[@]"`
-}
-
-# func_len string
-# STRING may not start with a hyphen.
-func_len ()
-{
-  func_len_result=`expr "$[1]" : ".*" 2>/dev/null || echo $max_cmd_len`
-}
-
-_LT_EOF
-esac
-
-case $lt_shell_append in
-  yes)
-    cat << \_LT_EOF >> "$cfgfile"
-
-# func_append var value
-# Append VALUE to the end of shell variable VAR.
-func_append ()
-{
-  eval "$[1]+=\$[2]"
-}
-_LT_EOF
-    ;;
-  *)
-    cat << \_LT_EOF >> "$cfgfile"
-
-# func_append var value
-# Append VALUE to the end of shell variable VAR.
-func_append ()
-{
-  eval "$[1]=\$$[1]\$[2]"
-}
-
-_LT_EOF
-    ;;
-  esac
-])
diff --git a/libraries/eet/m4/ltoptions.m4 b/libraries/eet/m4/ltoptions.m4
deleted file mode 100644
index 34151a3..0000000
--- a/libraries/eet/m4/ltoptions.m4
+++ /dev/null
@@ -1,368 +0,0 @@
-# Helper functions for option handling.                    -*- Autoconf -*-
-#
-#   Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc.
-#   Written by Gary V. Vaughan, 2004
-#
-# This file is free software; the Free Software Foundation gives
-# unlimited permission to copy and/or distribute it, with or without
-# modifications, as long as this notice is preserved.
-
-# serial 6 ltoptions.m4
-
-# This is to help aclocal find these macros, as it can't see m4_define.
-AC_DEFUN([LTOPTIONS_VERSION], [m4_if([1])])
-
-
-# _LT_MANGLE_OPTION(MACRO-NAME, OPTION-NAME)
-# ------------------------------------------
-m4_define([_LT_MANGLE_OPTION],
-[[_LT_OPTION_]m4_bpatsubst($1__$2, [[^a-zA-Z0-9_]], [_])])
-
-
-# _LT_SET_OPTION(MACRO-NAME, OPTION-NAME)
-# ---------------------------------------
-# Set option OPTION-NAME for macro MACRO-NAME, and if there is a
-# matching handler defined, dispatch to it.  Other OPTION-NAMEs are
-# saved as a flag.
-m4_define([_LT_SET_OPTION],
-[m4_define(_LT_MANGLE_OPTION([$1], [$2]))dnl
-m4_ifdef(_LT_MANGLE_DEFUN([$1], [$2]),
-        _LT_MANGLE_DEFUN([$1], [$2]),
-    [m4_warning([Unknown $1 option `$2'])])[]dnl
-])
-
-
-# _LT_IF_OPTION(MACRO-NAME, OPTION-NAME, IF-SET, [IF-NOT-SET])
-# ------------------------------------------------------------
-# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
-m4_define([_LT_IF_OPTION],
-[m4_ifdef(_LT_MANGLE_OPTION([$1], [$2]), [$3], [$4])])
-
-
-# _LT_UNLESS_OPTIONS(MACRO-NAME, OPTION-LIST, IF-NOT-SET)
-# -------------------------------------------------------
-# Execute IF-NOT-SET unless all options in OPTION-LIST for MACRO-NAME
-# are set.
-m4_define([_LT_UNLESS_OPTIONS],
-[m4_foreach([_LT_Option], m4_split(m4_normalize([$2])),
-            [m4_ifdef(_LT_MANGLE_OPTION([$1], _LT_Option),
-                      [m4_define([$0_found])])])[]dnl
-m4_ifdef([$0_found], [m4_undefine([$0_found])], [$3
-])[]dnl
-])
-
-
-# _LT_SET_OPTIONS(MACRO-NAME, OPTION-LIST)
-# ----------------------------------------
-# OPTION-LIST is a space-separated list of Libtool options associated
-# with MACRO-NAME.  If any OPTION has a matching handler declared with
-# LT_OPTION_DEFINE, dispatch to that macro; otherwise complain about
-# the unknown option and exit.
-m4_defun([_LT_SET_OPTIONS],
-[# Set options
-m4_foreach([_LT_Option], m4_split(m4_normalize([$2])),
-    [_LT_SET_OPTION([$1], _LT_Option)])
-
-m4_if([$1],[LT_INIT],[
-  dnl
-  dnl Simply set some default values (i.e off) if boolean options were not
-  dnl specified:
-  _LT_UNLESS_OPTIONS([LT_INIT], [dlopen], [enable_dlopen=no
-  ])
-  _LT_UNLESS_OPTIONS([LT_INIT], [win32-dll], [enable_win32_dll=no
-  ])
-  dnl
-  dnl If no reference was made to various pairs of opposing options, then
-  dnl we run the default mode handler for the pair.  For example, if neither
-  dnl `shared' nor `disable-shared' was passed, we enable building of shared
-  dnl archives by default:
-  _LT_UNLESS_OPTIONS([LT_INIT], [shared disable-shared], [_LT_ENABLE_SHARED])
-  _LT_UNLESS_OPTIONS([LT_INIT], [static disable-static], [_LT_ENABLE_STATIC])
-  _LT_UNLESS_OPTIONS([LT_INIT], [pic-only no-pic], [_LT_WITH_PIC])
-  _LT_UNLESS_OPTIONS([LT_INIT], [fast-install disable-fast-install],
-                   [_LT_ENABLE_FAST_INSTALL])
-  ])
-])# _LT_SET_OPTIONS
-
-
-## --------------------------------- ##
-## Macros to handle LT_INIT options. ##
-## --------------------------------- ##
-
-# _LT_MANGLE_DEFUN(MACRO-NAME, OPTION-NAME)
-# -----------------------------------------
-m4_define([_LT_MANGLE_DEFUN],
-[[_LT_OPTION_DEFUN_]m4_bpatsubst(m4_toupper([$1__$2]), [[^A-Z0-9_]], [_])])
-
-
-# LT_OPTION_DEFINE(MACRO-NAME, OPTION-NAME, CODE)
-# -----------------------------------------------
-m4_define([LT_OPTION_DEFINE],
-[m4_define(_LT_MANGLE_DEFUN([$1], [$2]), [$3])[]dnl
-])# LT_OPTION_DEFINE
-
-
-# dlopen
-# ------
-LT_OPTION_DEFINE([LT_INIT], [dlopen], [enable_dlopen=yes
-])
-
-AU_DEFUN([AC_LIBTOOL_DLOPEN],
-[_LT_SET_OPTION([LT_INIT], [dlopen])
-AC_DIAGNOSE([obsolete],
-[$0: Remove this warning and the call to _LT_SET_OPTION when you
-put the `dlopen' option into LT_INIT's first parameter.])
-])
-
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AC_LIBTOOL_DLOPEN], [])
-
-
-# win32-dll
-# ---------
-# Declare package support for building win32 dll's.
-LT_OPTION_DEFINE([LT_INIT], [win32-dll],
-[enable_win32_dll=yes
-
-case $host in
-*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-cegcc*)
-  AC_CHECK_TOOL(AS, as, false)
-  AC_CHECK_TOOL(DLLTOOL, dlltool, false)
-  AC_CHECK_TOOL(OBJDUMP, objdump, false)
-  ;;
-esac
-
-test -z "$AS" && AS=as
-_LT_DECL([], [AS],      [0], [Assembler program])dnl
-
-test -z "$DLLTOOL" && DLLTOOL=dlltool
-_LT_DECL([], [DLLTOOL], [0], [DLL creation program])dnl
-
-test -z "$OBJDUMP" && OBJDUMP=objdump
-_LT_DECL([], [OBJDUMP], [0], [Object dumper program])dnl
-])# win32-dll
-
-AU_DEFUN([AC_LIBTOOL_WIN32_DLL],
-[AC_REQUIRE([AC_CANONICAL_HOST])dnl
-_LT_SET_OPTION([LT_INIT], [win32-dll])
-AC_DIAGNOSE([obsolete],
-[$0: Remove this warning and the call to _LT_SET_OPTION when you
-put the `win32-dll' option into LT_INIT's first parameter.])
-])
-
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AC_LIBTOOL_WIN32_DLL], [])
-
-
-# _LT_ENABLE_SHARED([DEFAULT])
-# ----------------------------
-# implement the --enable-shared flag, and supports the `shared' and
-# `disable-shared' LT_INIT options.
-# DEFAULT is either `yes' or `no'.  If omitted, it defaults to `yes'.
-m4_define([_LT_ENABLE_SHARED],
-[m4_define([_LT_ENABLE_SHARED_DEFAULT], [m4_if($1, no, no, yes)])dnl
-AC_ARG_ENABLE([shared],
-    [AS_HELP_STRING([--enable-shared@<:@=PKGS@:>@],
-        [build shared libraries @<:@default=]_LT_ENABLE_SHARED_DEFAULT[@:>@])],
-    [p=${PACKAGE-default}
-    case $enableval in
-    yes) enable_shared=yes ;;
-    no) enable_shared=no ;;
-    *)
-      enable_shared=no
-      # Look at the argument we got.  We use all the common list separators.
-      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-      for pkg in $enableval; do
-        IFS="$lt_save_ifs"
-        if test "X$pkg" = "X$p"; then
-          enable_shared=yes
-        fi
-      done
-      IFS="$lt_save_ifs"
-      ;;
-    esac],
-    [enable_shared=]_LT_ENABLE_SHARED_DEFAULT)
-
-    _LT_DECL([build_libtool_libs], [enable_shared], [0],
-        [Whether or not to build shared libraries])
-])# _LT_ENABLE_SHARED
-
-LT_OPTION_DEFINE([LT_INIT], [shared], [_LT_ENABLE_SHARED([yes])])
-LT_OPTION_DEFINE([LT_INIT], [disable-shared], [_LT_ENABLE_SHARED([no])])
-
-# Old names:
-AC_DEFUN([AC_ENABLE_SHARED],
-[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[shared])
-])
-
-AC_DEFUN([AC_DISABLE_SHARED],
-[_LT_SET_OPTION([LT_INIT], [disable-shared])
-])
-
-AU_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)])
-AU_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)])
-
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AM_ENABLE_SHARED], [])
-dnl AC_DEFUN([AM_DISABLE_SHARED], [])
-
-
-
-# _LT_ENABLE_STATIC([DEFAULT])
-# ----------------------------
-# implement the --enable-static flag, and support the `static' and
-# `disable-static' LT_INIT options.
-# DEFAULT is either `yes' or `no'.  If omitted, it defaults to `yes'.
-m4_define([_LT_ENABLE_STATIC],
-[m4_define([_LT_ENABLE_STATIC_DEFAULT], [m4_if($1, no, no, yes)])dnl
-AC_ARG_ENABLE([static],
-    [AS_HELP_STRING([--enable-static@<:@=PKGS@:>@],
-        [build static libraries @<:@default=]_LT_ENABLE_STATIC_DEFAULT[@:>@])],
-    [p=${PACKAGE-default}
-    case $enableval in
-    yes) enable_static=yes ;;
-    no) enable_static=no ;;
-    *)
-     enable_static=no
-      # Look at the argument we got.  We use all the common list separators.
-      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-      for pkg in $enableval; do
-        IFS="$lt_save_ifs"
-        if test "X$pkg" = "X$p"; then
-          enable_static=yes
-        fi
-      done
-      IFS="$lt_save_ifs"
-      ;;
-    esac],
-    [enable_static=]_LT_ENABLE_STATIC_DEFAULT)
-
-    _LT_DECL([build_old_libs], [enable_static], [0],
-        [Whether or not to build static libraries])
-])# _LT_ENABLE_STATIC
-
-LT_OPTION_DEFINE([LT_INIT], [static], [_LT_ENABLE_STATIC([yes])])
-LT_OPTION_DEFINE([LT_INIT], [disable-static], [_LT_ENABLE_STATIC([no])])
-
-# Old names:
-AC_DEFUN([AC_ENABLE_STATIC],
-[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[static])
-])
-
-AC_DEFUN([AC_DISABLE_STATIC],
-[_LT_SET_OPTION([LT_INIT], [disable-static])
-])
-
-AU_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)])
-AU_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)])
-
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AM_ENABLE_STATIC], [])
-dnl AC_DEFUN([AM_DISABLE_STATIC], [])
-
-
-
-# _LT_ENABLE_FAST_INSTALL([DEFAULT])
-# ----------------------------------
-# implement the --enable-fast-install flag, and support the `fast-install'
-# and `disable-fast-install' LT_INIT options.
-# DEFAULT is either `yes' or `no'.  If omitted, it defaults to `yes'.
-m4_define([_LT_ENABLE_FAST_INSTALL],
-[m4_define([_LT_ENABLE_FAST_INSTALL_DEFAULT], [m4_if($1, no, no, yes)])dnl
-AC_ARG_ENABLE([fast-install],
-    [AS_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@],
-    [optimize for fast installation @<:@default=]_LT_ENABLE_FAST_INSTALL_DEFAULT[@:>@])],
-    [p=${PACKAGE-default}
-    case $enableval in
-    yes) enable_fast_install=yes ;;
-    no) enable_fast_install=no ;;
-    *)
-      enable_fast_install=no
-      # Look at the argument we got.  We use all the common list separators.
-      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-      for pkg in $enableval; do
-        IFS="$lt_save_ifs"
-        if test "X$pkg" = "X$p"; then
-          enable_fast_install=yes
-        fi
-      done
-      IFS="$lt_save_ifs"
-      ;;
-    esac],
-    [enable_fast_install=]_LT_ENABLE_FAST_INSTALL_DEFAULT)
-
-_LT_DECL([fast_install], [enable_fast_install], [0],
-         [Whether or not to optimize for fast installation])dnl
-])# _LT_ENABLE_FAST_INSTALL
-
-LT_OPTION_DEFINE([LT_INIT], [fast-install], [_LT_ENABLE_FAST_INSTALL([yes])])
-LT_OPTION_DEFINE([LT_INIT], [disable-fast-install], [_LT_ENABLE_FAST_INSTALL([no])])
-
-# Old names:
-AU_DEFUN([AC_ENABLE_FAST_INSTALL],
-[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[fast-install])
-AC_DIAGNOSE([obsolete],
-[$0: Remove this warning and the call to _LT_SET_OPTION when you put
-the `fast-install' option into LT_INIT's first parameter.])
-])
-
-AU_DEFUN([AC_DISABLE_FAST_INSTALL],
-[_LT_SET_OPTION([LT_INIT], [disable-fast-install])
-AC_DIAGNOSE([obsolete],
-[$0: Remove this warning and the call to _LT_SET_OPTION when you put
-the `disable-fast-install' option into LT_INIT's first parameter.])
-])
-
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AC_ENABLE_FAST_INSTALL], [])
-dnl AC_DEFUN([AM_DISABLE_FAST_INSTALL], [])
-
-
-# _LT_WITH_PIC([MODE])
-# --------------------
-# implement the --with-pic flag, and support the `pic-only' and `no-pic'
-# LT_INIT options.
-# MODE is either `yes' or `no'.  If omitted, it defaults to `both'.
-m4_define([_LT_WITH_PIC],
-[AC_ARG_WITH([pic],
-    [AS_HELP_STRING([--with-pic],
-        [try to use only PIC/non-PIC objects @<:@default=use both@:>@])],
-    [pic_mode="$withval"],
-    [pic_mode=default])
-
-test -z "$pic_mode" && pic_mode=m4_default([$1], [default])
-
-_LT_DECL([], [pic_mode], [0], [What type of objects to build])dnl
-])# _LT_WITH_PIC
-
-LT_OPTION_DEFINE([LT_INIT], [pic-only], [_LT_WITH_PIC([yes])])
-LT_OPTION_DEFINE([LT_INIT], [no-pic], [_LT_WITH_PIC([no])])
-
-# Old name:
-AU_DEFUN([AC_LIBTOOL_PICMODE],
-[_LT_SET_OPTION([LT_INIT], [pic-only])
-AC_DIAGNOSE([obsolete],
-[$0: Remove this warning and the call to _LT_SET_OPTION when you
-put the `pic-only' option into LT_INIT's first parameter.])
-])
-
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AC_LIBTOOL_PICMODE], [])
-
-## ----------------- ##
-## LTDL_INIT Options ##
-## ----------------- ##
-
-m4_define([_LTDL_MODE], [])
-LT_OPTION_DEFINE([LTDL_INIT], [nonrecursive],
-                 [m4_define([_LTDL_MODE], [nonrecursive])])
-LT_OPTION_DEFINE([LTDL_INIT], [recursive],
-                 [m4_define([_LTDL_MODE], [recursive])])
-LT_OPTION_DEFINE([LTDL_INIT], [subproject],
-                 [m4_define([_LTDL_MODE], [subproject])])
-
-m4_define([_LTDL_TYPE], [])
-LT_OPTION_DEFINE([LTDL_INIT], [installable],
-                 [m4_define([_LTDL_TYPE], [installable])])
-LT_OPTION_DEFINE([LTDL_INIT], [convenience],
-                 [m4_define([_LTDL_TYPE], [convenience])])
diff --git a/libraries/eet/m4/ltsugar.m4 b/libraries/eet/m4/ltsugar.m4
deleted file mode 100644
index 9000a05..0000000
--- a/libraries/eet/m4/ltsugar.m4
+++ /dev/null
@@ -1,123 +0,0 @@
-# ltsugar.m4 -- libtool m4 base layer.                         -*-Autoconf-*-
-#
-# Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc.
-# Written by Gary V. Vaughan, 2004
-#
-# This file is free software; the Free Software Foundation gives
-# unlimited permission to copy and/or distribute it, with or without
-# modifications, as long as this notice is preserved.
-
-# serial 6 ltsugar.m4
-
-# This is to help aclocal find these macros, as it can't see m4_define.
-AC_DEFUN([LTSUGAR_VERSION], [m4_if([0.1])])
-
-
-# lt_join(SEP, ARG1, [ARG2...])
-# -----------------------------
-# Produce ARG1SEPARG2...SEPARGn, omitting [] arguments and their
-# associated separator.
-# Needed until we can rely on m4_join from Autoconf 2.62, since all earlier
-# versions in m4sugar had bugs.
-m4_define([lt_join],
-[m4_if([$#], [1], [],
-       [$#], [2], [[$2]],
-       [m4_if([$2], [], [], [[$2]_])$0([$1], m4_shift(m4_shift($@)))])])
-m4_define([_lt_join],
-[m4_if([$#$2], [2], [],
-       [m4_if([$2], [], [], [[$1$2]])$0([$1], m4_shift(m4_shift($@)))])])
-
-
-# lt_car(LIST)
-# lt_cdr(LIST)
-# ------------
-# Manipulate m4 lists.
-# These macros are necessary as long as will still need to support
-# Autoconf-2.59 which quotes differently.
-m4_define([lt_car], [[$1]])
-m4_define([lt_cdr],
-[m4_if([$#], 0, [m4_fatal([$0: cannot be called without arguments])],
-       [$#], 1, [],
-       [m4_dquote(m4_shift($@))])])
-m4_define([lt_unquote], $1)
-
-
-# lt_append(MACRO-NAME, STRING, [SEPARATOR])
-# ------------------------------------------
-# Redefine MACRO-NAME to hold its former content plus `SEPARATOR'`STRING'.
-# Note that neither SEPARATOR nor STRING are expanded; they are appended
-# to MACRO-NAME as is (leaving the expansion for when MACRO-NAME is invoked).
-# No SEPARATOR is output if MACRO-NAME was previously undefined (different
-# than defined and empty).
-#
-# This macro is needed until we can rely on Autoconf 2.62, since earlier
-# versions of m4sugar mistakenly expanded SEPARATOR but not STRING.
-m4_define([lt_append],
-[m4_define([$1],
-           m4_ifdef([$1], [m4_defn([$1])[$3]])[$2])])
-
-
-
-# lt_combine(SEP, PREFIX-LIST, INFIX, SUFFIX1, [SUFFIX2...])
-# ----------------------------------------------------------
-# Produce a SEP delimited list of all paired combinations of elements of
-# PREFIX-LIST with SUFFIX1 through SUFFIXn.  Each element of the list
-# has the form PREFIXmINFIXSUFFIXn.
-# Needed until we can rely on m4_combine added in Autoconf 2.62.
-m4_define([lt_combine],
-[m4_if(m4_eval([$# > 3]), [1],
-       [m4_pushdef([_Lt_sep], [m4_define([_Lt_sep], m4_defn([lt_car]))])]]dnl
-[[m4_foreach([_Lt_prefix], [$2],
-             [m4_foreach([_Lt_suffix],
-                ]m4_dquote(m4_dquote(m4_shift(m4_shift(m4_shift($@)))))[,
-        [_Lt_sep([$1])[]m4_defn([_Lt_prefix])[$3]m4_defn([_Lt_suffix])])])])])
-
-
-# lt_if_append_uniq(MACRO-NAME, VARNAME, [SEPARATOR], [UNIQ], [NOT-UNIQ])
-# -----------------------------------------------------------------------
-# Iff MACRO-NAME does not yet contain VARNAME, then append it (delimited
-# by SEPARATOR if supplied) and expand UNIQ, else NOT-UNIQ.
-m4_define([lt_if_append_uniq],
-[m4_ifdef([$1],
-          [m4_if(m4_index([$3]m4_defn([$1])[$3], [$3$2$3]), [-1],
-                 [lt_append([$1], [$2], [$3])$4],
-                 [$5])],
-          [lt_append([$1], [$2], [$3])$4])])
-
-
-# lt_dict_add(DICT, KEY, VALUE)
-# -----------------------------
-m4_define([lt_dict_add],
-[m4_define([$1($2)], [$3])])
-
-
-# lt_dict_add_subkey(DICT, KEY, SUBKEY, VALUE)
-# --------------------------------------------
-m4_define([lt_dict_add_subkey],
-[m4_define([$1($2:$3)], [$4])])
-
-
-# lt_dict_fetch(DICT, KEY, [SUBKEY])
-# ----------------------------------
-m4_define([lt_dict_fetch],
-[m4_ifval([$3],
-        m4_ifdef([$1($2:$3)], [m4_defn([$1($2:$3)])]),
-    m4_ifdef([$1($2)], [m4_defn([$1($2)])]))])
-
-
-# lt_if_dict_fetch(DICT, KEY, [SUBKEY], VALUE, IF-TRUE, [IF-FALSE])
-# -----------------------------------------------------------------
-m4_define([lt_if_dict_fetch],
-[m4_if(lt_dict_fetch([$1], [$2], [$3]), [$4],
-        [$5],
-    [$6])])
-
-
-# lt_dict_filter(DICT, [SUBKEY], VALUE, [SEPARATOR], KEY, [...])
-# --------------------------------------------------------------
-m4_define([lt_dict_filter],
-[m4_if([$5], [], [],
-  [lt_join(m4_quote(m4_default([$4], [[, ]])),
-           lt_unquote(m4_split(m4_normalize(m4_foreach(_Lt_key, lt_car([m4_shiftn(4, $@)]),
-                      [lt_if_dict_fetch([$1], _Lt_key, [$2], [$3], [_Lt_key ])])))))])[]dnl
-])
diff --git a/libraries/eet/m4/ltversion.m4 b/libraries/eet/m4/ltversion.m4
deleted file mode 100644
index f3c5309..0000000
--- a/libraries/eet/m4/ltversion.m4
+++ /dev/null
@@ -1,23 +0,0 @@
-# ltversion.m4 -- version numbers                       -*- Autoconf -*-
-#
-#   Copyright (C) 2004 Free Software Foundation, Inc.
-#   Written by Scott James Remnant, 2004
-#
-# This file is free software; the Free Software Foundation gives
-# unlimited permission to copy and/or distribute it, with or without
-# modifications, as long as this notice is preserved.
-
-# Generated from ltversion.in.
-
-# serial 3017 ltversion.m4
-# This file is part of GNU Libtool
-
-m4_define([LT_PACKAGE_VERSION], [2.2.6b])
-m4_define([LT_PACKAGE_REVISION], [1.3017])
-
-AC_DEFUN([LTVERSION_VERSION],
-[macro_version='2.2.6b'
-macro_revision='1.3017'
-_LT_DECL(, macro_version, 0, [Which release of libtool.m4 was used?])
-_LT_DECL(, macro_revision, 0)
-])
diff --git a/libraries/eet/m4/lt~obsolete.m4 b/libraries/eet/m4/lt~obsolete.m4
deleted file mode 100644
index 637bb20..0000000
--- a/libraries/eet/m4/lt~obsolete.m4
+++ /dev/null
@@ -1,92 +0,0 @@
-# lt~obsolete.m4 -- aclocal satisfying obsolete definitions.    -*-Autoconf-*-
-#
-#   Copyright (C) 2004, 2005, 2007 Free Software Foundation, Inc.
-#   Written by Scott James Remnant, 2004.
-#
-# This file is free software; the Free Software Foundation gives
-# unlimited permission to copy and/or distribute it, with or without
-# modifications, as long as this notice is preserved.
-
-# serial 4 lt~obsolete.m4
-
-# These exist entirely to fool aclocal when bootstrapping libtool.
-#
-# In the past libtool.m4 has provided macros via AC_DEFUN (or AU_DEFUN)
-# which have later been changed to m4_define as they aren't part of the
-# exported API, or moved to Autoconf or Automake where they belong.
-#
-# The trouble is, aclocal is a bit thick.  It'll see the old AC_DEFUN
-# in /usr/share/aclocal/libtool.m4 and remember it, then when it sees us
-# using a macro with the same name in our local m4/libtool.m4 it'll
-# pull the old libtool.m4 in (it doesn't see our shiny new m4_define
-# and doesn't know about Autoconf macros at all.)
-#
-# So we provide this file, which has a silly filename so it's always
-# included after everything else.  This provides aclocal with the
-# AC_DEFUNs it wants, but when m4 processes it, it doesn't do anything
-# because those macros already exist, or will be overwritten later.
-# We use AC_DEFUN over AU_DEFUN for compatibility with aclocal-1.6. 
-#
-# Anytime we withdraw an AC_DEFUN or AU_DEFUN, remember to add it here.
-# Yes, that means every name once taken will need to remain here until
-# we give up compatibility with versions before 1.7, at which point
-# we need to keep only those names which we still refer to.
-
-# This is to help aclocal find these macros, as it can't see m4_define.
-AC_DEFUN([LTOBSOLETE_VERSION], [m4_if([1])])
-
-m4_ifndef([AC_LIBTOOL_LINKER_OPTION],   [AC_DEFUN([AC_LIBTOOL_LINKER_OPTION])])
-m4_ifndef([AC_PROG_EGREP],              [AC_DEFUN([AC_PROG_EGREP])])
-m4_ifndef([_LT_AC_PROG_ECHO_BACKSLASH], [AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH])])
-m4_ifndef([_LT_AC_SHELL_INIT],          [AC_DEFUN([_LT_AC_SHELL_INIT])])
-m4_ifndef([_LT_AC_SYS_LIBPATH_AIX],     [AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX])])
-m4_ifndef([_LT_PROG_LTMAIN],            [AC_DEFUN([_LT_PROG_LTMAIN])])
-m4_ifndef([_LT_AC_TAGVAR],              [AC_DEFUN([_LT_AC_TAGVAR])])
-m4_ifndef([AC_LTDL_ENABLE_INSTALL],     [AC_DEFUN([AC_LTDL_ENABLE_INSTALL])])
-m4_ifndef([AC_LTDL_PREOPEN],            [AC_DEFUN([AC_LTDL_PREOPEN])])
-m4_ifndef([_LT_AC_SYS_COMPILER],        [AC_DEFUN([_LT_AC_SYS_COMPILER])])
-m4_ifndef([_LT_AC_LOCK],                [AC_DEFUN([_LT_AC_LOCK])])
-m4_ifndef([AC_LIBTOOL_SYS_OLD_ARCHIVE], [AC_DEFUN([AC_LIBTOOL_SYS_OLD_ARCHIVE])])
-m4_ifndef([_LT_AC_TRY_DLOPEN_SELF],     [AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF])])
-m4_ifndef([AC_LIBTOOL_PROG_CC_C_O],     [AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O])])
-m4_ifndef([AC_LIBTOOL_SYS_HARD_LINK_LOCKS], [AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS])])
-m4_ifndef([AC_LIBTOOL_OBJDIR],          [AC_DEFUN([AC_LIBTOOL_OBJDIR])])
-m4_ifndef([AC_LTDL_OBJDIR],             [AC_DEFUN([AC_LTDL_OBJDIR])])
-m4_ifndef([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH], [AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH])])
-m4_ifndef([AC_LIBTOOL_SYS_LIB_STRIP],   [AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP])])
-m4_ifndef([AC_PATH_MAGIC],              [AC_DEFUN([AC_PATH_MAGIC])])
-m4_ifndef([AC_PROG_LD_GNU],             [AC_DEFUN([AC_PROG_LD_GNU])])
-m4_ifndef([AC_PROG_LD_RELOAD_FLAG],     [AC_DEFUN([AC_PROG_LD_RELOAD_FLAG])])
-m4_ifndef([AC_DEPLIBS_CHECK_METHOD],    [AC_DEFUN([AC_DEPLIBS_CHECK_METHOD])])
-m4_ifndef([AC_LIBTOOL_PROG_COMPILER_NO_RTTI], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI])])
-m4_ifndef([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE], [AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE])])
-m4_ifndef([AC_LIBTOOL_PROG_COMPILER_PIC], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC])])
-m4_ifndef([AC_LIBTOOL_PROG_LD_SHLIBS],  [AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS])])
-m4_ifndef([AC_LIBTOOL_POSTDEP_PREDEP],  [AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP])])
-m4_ifndef([LT_AC_PROG_EGREP],           [AC_DEFUN([LT_AC_PROG_EGREP])])
-m4_ifndef([LT_AC_PROG_SED],             [AC_DEFUN([LT_AC_PROG_SED])])
-m4_ifndef([_LT_CC_BASENAME],            [AC_DEFUN([_LT_CC_BASENAME])])
-m4_ifndef([_LT_COMPILER_BOILERPLATE],   [AC_DEFUN([_LT_COMPILER_BOILERPLATE])])
-m4_ifndef([_LT_LINKER_BOILERPLATE],     [AC_DEFUN([_LT_LINKER_BOILERPLATE])])
-m4_ifndef([_AC_PROG_LIBTOOL],           [AC_DEFUN([_AC_PROG_LIBTOOL])])
-m4_ifndef([AC_LIBTOOL_SETUP],           [AC_DEFUN([AC_LIBTOOL_SETUP])])
-m4_ifndef([_LT_AC_CHECK_DLFCN],         [AC_DEFUN([_LT_AC_CHECK_DLFCN])])
-m4_ifndef([AC_LIBTOOL_SYS_DYNAMIC_LINKER],      [AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER])])
-m4_ifndef([_LT_AC_TAGCONFIG],           [AC_DEFUN([_LT_AC_TAGCONFIG])])
-m4_ifndef([AC_DISABLE_FAST_INSTALL],    [AC_DEFUN([AC_DISABLE_FAST_INSTALL])])
-m4_ifndef([_LT_AC_LANG_CXX],            [AC_DEFUN([_LT_AC_LANG_CXX])])
-m4_ifndef([_LT_AC_LANG_F77],            [AC_DEFUN([_LT_AC_LANG_F77])])
-m4_ifndef([_LT_AC_LANG_GCJ],            [AC_DEFUN([_LT_AC_LANG_GCJ])])
-m4_ifndef([AC_LIBTOOL_RC],              [AC_DEFUN([AC_LIBTOOL_RC])])
-m4_ifndef([AC_LIBTOOL_LANG_C_CONFIG],   [AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG])])
-m4_ifndef([_LT_AC_LANG_C_CONFIG],       [AC_DEFUN([_LT_AC_LANG_C_CONFIG])])
-m4_ifndef([AC_LIBTOOL_LANG_CXX_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG])])
-m4_ifndef([_LT_AC_LANG_CXX_CONFIG],     [AC_DEFUN([_LT_AC_LANG_CXX_CONFIG])])
-m4_ifndef([AC_LIBTOOL_LANG_F77_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG])])
-m4_ifndef([_LT_AC_LANG_F77_CONFIG],     [AC_DEFUN([_LT_AC_LANG_F77_CONFIG])])
-m4_ifndef([AC_LIBTOOL_LANG_GCJ_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG])])
-m4_ifndef([_LT_AC_LANG_GCJ_CONFIG],     [AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG])])
-m4_ifndef([AC_LIBTOOL_LANG_RC_CONFIG],  [AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG])])
-m4_ifndef([_LT_AC_LANG_RC_CONFIG],      [AC_DEFUN([_LT_AC_LANG_RC_CONFIG])])
-m4_ifndef([AC_LIBTOOL_CONFIG],          [AC_DEFUN([AC_LIBTOOL_CONFIG])])
-m4_ifndef([_LT_AC_FILE_LTDLL_C],        [AC_DEFUN([_LT_AC_FILE_LTDLL_C])])
diff --git a/libraries/eet/missing b/libraries/eet/missing
deleted file mode 100755
index 28055d2..0000000
--- a/libraries/eet/missing
+++ /dev/null
@@ -1,376 +0,0 @@
-#! /bin/sh
-# Common stub for a few missing GNU programs while installing.
-
-scriptversion=2009-04-28.21; # UTC
-
-# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006,
-# 2008, 2009 Free Software Foundation, Inc.
-# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-if test $# -eq 0; then
-  echo 1>&2 "Try \`$0 --help' for more information"
-  exit 1
-fi
-
-run=:
-sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p'
-sed_minuso='s/.* -o \([^ ]*\).*/\1/p'
-
-# In the cases where this matters, `missing' is being run in the
-# srcdir already.
-if test -f configure.ac; then
-  configure_ac=configure.ac
-else
-  configure_ac=configure.in
-fi
-
-msg="missing on your system"
-
-case $1 in
---run)
-  # Try to run requested program, and just exit if it succeeds.
-  run=
-  shift
-  "$@" && exit 0
-  # Exit code 63 means version mismatch.  This often happens
-  # when the user try to use an ancient version of a tool on
-  # a file that requires a minimum version.  In this case we
-  # we should proceed has if the program had been absent, or
-  # if --run hadn't been passed.
-  if test $? = 63; then
-    run=:
-    msg="probably too old"
-  fi
-  ;;
-
-  -h|--h|--he|--hel|--help)
-    echo "\
-$0 [OPTION]... PROGRAM [ARGUMENT]...
-
-Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
-error status if there is no known handling for PROGRAM.
-
-Options:
-  -h, --help      display this help and exit
-  -v, --version   output version information and exit
-  --run           try to run the given command, and emulate it if it fails
-
-Supported PROGRAM values:
-  aclocal      touch file \`aclocal.m4'
-  autoconf     touch file \`configure'
-  autoheader   touch file \`config.h.in'
-  autom4te     touch the output file, or create a stub one
-  automake     touch all \`Makefile.in' files
-  bison        create \`y.tab.[ch]', if possible, from existing .[ch]
-  flex         create \`lex.yy.c', if possible, from existing .c
-  help2man     touch the output file
-  lex          create \`lex.yy.c', if possible, from existing .c
-  makeinfo     touch the output file
-  tar          try tar, gnutar, gtar, then tar without non-portable flags
-  yacc         create \`y.tab.[ch]', if possible, from existing .[ch]
-
-Version suffixes to PROGRAM as well as the prefixes \`gnu-', \`gnu', and
-\`g' are ignored when checking the name.
-
-Send bug reports to <bug-automake@gnu.org>."
-    exit $?
-    ;;
-
-  -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
-    echo "missing $scriptversion (GNU Automake)"
-    exit $?
-    ;;
-
-  -*)
-    echo 1>&2 "$0: Unknown \`$1' option"
-    echo 1>&2 "Try \`$0 --help' for more information"
-    exit 1
-    ;;
-
-esac
-
-# normalize program name to check for.
-program=`echo "$1" | sed '
-  s/^gnu-//; t
-  s/^gnu//; t
-  s/^g//; t'`
-
-# Now exit if we have it, but it failed.  Also exit now if we
-# don't have it and --version was passed (most likely to detect
-# the program).  This is about non-GNU programs, so use $1 not
-# $program.
-case $1 in
-  lex*|yacc*)
-    # Not GNU programs, they don't have --version.
-    ;;
-
-  tar*)
-    if test -n "$run"; then
-       echo 1>&2 "ERROR: \`tar' requires --run"
-       exit 1
-    elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
-       exit 1
-    fi
-    ;;
-
-  *)
-    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
-       # We have it, but it failed.
-       exit 1
-    elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
-       # Could not run --version or --help.  This is probably someone
-       # running `$TOOL --version' or `$TOOL --help' to check whether
-       # $TOOL exists and not knowing $TOOL uses missing.
-       exit 1
-    fi
-    ;;
-esac
-
-# If it does not exist, or fails to run (possibly an outdated version),
-# try to emulate it.
-case $program in
-  aclocal*)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified \`acinclude.m4' or \`${configure_ac}'.  You might want
-         to install the \`Automake' and \`Perl' packages.  Grab them from
-         any GNU archive site."
-    touch aclocal.m4
-    ;;
-
-  autoconf*)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified \`${configure_ac}'.  You might want to install the
-         \`Autoconf' and \`GNU m4' packages.  Grab them from any GNU
-         archive site."
-    touch configure
-    ;;
-
-  autoheader*)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified \`acconfig.h' or \`${configure_ac}'.  You might want
-         to install the \`Autoconf' and \`GNU m4' packages.  Grab them
-         from any GNU archive site."
-    files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
-    test -z "$files" && files="config.h"
-    touch_files=
-    for f in $files; do
-      case $f in
-      *:*) touch_files="$touch_files "`echo "$f" |
-                                       sed -e 's/^[^:]*://' -e 's/:.*//'`;;
-      *) touch_files="$touch_files $f.in";;
-      esac
-    done
-    touch $touch_files
-    ;;
-
-  automake*)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
-         You might want to install the \`Automake' and \`Perl' packages.
-         Grab them from any GNU archive site."
-    find . -type f -name Makefile.am -print |
-           sed 's/\.am$/.in/' |
-           while read f; do touch "$f"; done
-    ;;
-
-  autom4te*)
-    echo 1>&2 "\
-WARNING: \`$1' is needed, but is $msg.
-         You might have modified some files without having the
-         proper tools for further handling them.
-         You can get \`$1' as part of \`Autoconf' from any GNU
-         archive site."
-
-    file=`echo "$*" | sed -n "$sed_output"`
-    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
-    if test -f "$file"; then
-        touch $file
-    else
-        test -z "$file" || exec >$file
-        echo "#! /bin/sh"
-        echo "# Created by GNU Automake missing as a replacement of"
-        echo "#  $ $@"
-        echo "exit 0"
-        chmod +x $file
-        exit 1
-    fi
-    ;;
-
-  bison*|yacc*)
-    echo 1>&2 "\
-WARNING: \`$1' $msg.  You should only need it if
-         you modified a \`.y' file.  You may need the \`Bison' package
-         in order for those modifications to take effect.  You can get
-         \`Bison' from any GNU archive site."
-    rm -f y.tab.c y.tab.h
-    if test $# -ne 1; then
-        eval LASTARG="\${$#}"
-        case $LASTARG in
-        *.y)
-            SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
-            if test -f "$SRCFILE"; then
-                 cp "$SRCFILE" y.tab.c
-            fi
-            SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
-            if test -f "$SRCFILE"; then
-                 cp "$SRCFILE" y.tab.h
-            fi
-          ;;
-        esac
-    fi
-    if test ! -f y.tab.h; then
-        echo >y.tab.h
-    fi
-    if test ! -f y.tab.c; then
-        echo 'main() { return 0; }' >y.tab.c
-    fi
-    ;;
-
-  lex*|flex*)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified a \`.l' file.  You may need the \`Flex' package
-         in order for those modifications to take effect.  You can get
-         \`Flex' from any GNU archive site."
-    rm -f lex.yy.c
-    if test $# -ne 1; then
-        eval LASTARG="\${$#}"
-        case $LASTARG in
-        *.l)
-            SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
-            if test -f "$SRCFILE"; then
-                 cp "$SRCFILE" lex.yy.c
-            fi
-          ;;
-        esac
-    fi
-    if test ! -f lex.yy.c; then
-        echo 'main() { return 0; }' >lex.yy.c
-    fi
-    ;;
-
-  help2man*)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified a dependency of a manual page.  You may need the
-         \`Help2man' package in order for those modifications to take
-         effect.  You can get \`Help2man' from any GNU archive site."
-
-    file=`echo "$*" | sed -n "$sed_output"`
-    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
-    if test -f "$file"; then
-        touch $file
-    else
-        test -z "$file" || exec >$file
-        echo ".ab help2man is required to generate this page"
-        exit $?
-    fi
-    ;;
-
-  makeinfo*)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified a \`.texi' or \`.texinfo' file, or any other file
-         indirectly affecting the aspect of the manual.  The spurious
-         call might also be the consequence of using a buggy \`make' (AIX,
-         DU, IRIX).  You might want to install the \`Texinfo' package or
-         the \`GNU make' package.  Grab either from any GNU archive site."
-    # The file to touch is that specified with -o ...
-    file=`echo "$*" | sed -n "$sed_output"`
-    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
-    if test -z "$file"; then
-      # ... or it is the one specified with @setfilename ...
-      infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
-      file=`sed -n '
-        /^@setfilename/{
-          s/.* \([^ ]*\) *$/\1/
-          p
-          q
-        }' $infile`
-      # ... or it is derived from the source name (dir/f.texi becomes f.info)
-      test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info
-    fi
-    # If the file does not exist, the user really needs makeinfo;
-    # let's fail without touching anything.
-    test -f $file || exit 1
-    touch $file
-    ;;
-
-  tar*)
-    shift
-
-    # We have already tried tar in the generic part.
-    # Look for gnutar/gtar before invocation to avoid ugly error
-    # messages.
-    if (gnutar --version > /dev/null 2>&1); then
-       gnutar "$@" && exit 0
-    fi
-    if (gtar --version > /dev/null 2>&1); then
-       gtar "$@" && exit 0
-    fi
-    firstarg="$1"
-    if shift; then
-        case $firstarg in
-        *o*)
-            firstarg=`echo "$firstarg" | sed s/o//`
-            tar "$firstarg" "$@" && exit 0
-            ;;
-        esac
-        case $firstarg in
-        *h*)
-            firstarg=`echo "$firstarg" | sed s/h//`
-            tar "$firstarg" "$@" && exit 0
-            ;;
-        esac
-    fi
-
-    echo 1>&2 "\
-WARNING: I can't seem to be able to run \`tar' with the given arguments.
-         You may want to install GNU tar or Free paxutils, or check the
-         command line arguments."
-    exit 1
-    ;;
-
-  *)
-    echo 1>&2 "\
-WARNING: \`$1' is needed, and is $msg.
-         You might have modified some files without having the
-         proper tools for further handling them.  Check the \`README' file,
-         it often tells you about the needed prerequisites for installing
-         this package.  You may also peek at any GNU archive site, in case
-         some other package would contain this missing \`$1' program."
-    exit 1
-    ;;
-esac
-
-exit 0
-
-# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC"
-# time-stamp-end: "; # UTC"
-# End:
diff --git a/libraries/eet/sha1-for-source.txt b/libraries/eet/sha1-for-source.txt
deleted file mode 100644
index ef2cd95..0000000
--- a/libraries/eet/sha1-for-source.txt
+++ /dev/null
@@ -1 +0,0 @@
-754d240f852579fbfa1d3416e85943dfa60e1a10
diff --git a/libraries/eet/src/Makefile.am b/libraries/eet/src/Makefile.am
deleted file mode 100644
index d98d3b6..0000000
--- a/libraries/eet/src/Makefile.am
+++ /dev/null
@@ -1,3 +0,0 @@
-MAINTAINERCLEANFILES = Makefile.in
-
-SUBDIRS = lib bin tests examples
diff --git a/libraries/eet/src/Makefile.in b/libraries/eet/src/Makefile.in
deleted file mode 100644
index bfdc4f6..0000000
--- a/libraries/eet/src/Makefile.in
+++ /dev/null
@@ -1,608 +0,0 @@
-# Makefile.in generated by automake 1.11.1 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
-# Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-VPATH = @srcdir@
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-subdir = src
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/ac_attribute.m4 \
-        $(top_srcdir)/m4/ac_path_generic.m4 \
-        $(top_srcdir)/m4/efl_binary.m4 \
-        $(top_srcdir)/m4/efl_compiler_flag.m4 \
-        $(top_srcdir)/m4/efl_coverage.m4 \
-        $(top_srcdir)/m4/efl_doxygen.m4 \
-        $(top_srcdir)/m4/efl_fnmatch.m4 \
-        $(top_srcdir)/m4/efl_path_max.m4 $(top_srcdir)/m4/efl_tests.m4 \
-        $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
-        $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
-        $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-        $(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/config.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-AM_V_GEN = $(am__v_GEN_$(V))
-am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
-am__v_GEN_0 = @echo "  GEN   " $@;
-AM_V_at = $(am__v_at_$(V))
-am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
-am__v_at_0 = @
-SOURCES =
-DIST_SOURCES =
-RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
-        html-recursive info-recursive install-data-recursive \
-        install-dvi-recursive install-exec-recursive \
-        install-html-recursive install-info-recursive \
-        install-pdf-recursive install-ps-recursive install-recursive \
-        installcheck-recursive installdirs-recursive pdf-recursive \
-        ps-recursive uninstall-recursive
-RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
-  distclean-recursive maintainer-clean-recursive
-AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
-        $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
-        distdir
-ETAGS = etags
-CTAGS = ctags
-DIST_SUBDIRS = $(SUBDIRS)
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-am__relativize = \
-  dir0=`pwd`; \
-  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
-  sed_rest='s,^[^/]*/*,,'; \
-  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
-  sed_butlast='s,/*[^/]*$$,,'; \
-  while test -n "$$dir1"; do \
-    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
-    if test "$$first" != "."; then \
-      if test "$$first" = ".."; then \
-        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
-        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
-      else \
-        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
-        if test "$$first2" = "$$first"; then \
-          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
-        else \
-          dir2="../$$dir2"; \
-        fi; \
-        dir0="$$dir0"/"$$first"; \
-      fi; \
-    fi; \
-    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
-  done; \
-  reldir="$$dir2"
-ACLOCAL = @ACLOCAL@
-ALLOCA = @ALLOCA@
-AMTAR = @AMTAR@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AR = @AR@
-AS = @AS@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CHECK_CFLAGS = @CHECK_CFLAGS@
-CHECK_LIBS = @CHECK_LIBS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEBUG_CFLAGS = @DEBUG_CFLAGS@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DLLTOOL = @DLLTOOL@
-DSYMUTIL = @DSYMUTIL@
-DUMPBIN = @DUMPBIN@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EET_CFLAGS = @EET_CFLAGS@
-EET_CPPFLAGS = @EET_CPPFLAGS@
-EET_LIBS = @EET_LIBS@
-EET_PRG = @EET_PRG@
-EFL_COVERAGE_CFLAGS = @EFL_COVERAGE_CFLAGS@
-EFL_COVERAGE_LIBS = @EFL_COVERAGE_LIBS@
-EFL_EET_BUILD = @EFL_EET_BUILD@
-EFL_FNMATCH_LIBS = @EFL_FNMATCH_LIBS@
-EGREP = @EGREP@
-EINA_CFLAGS = @EINA_CFLAGS@
-EINA_LIBS = @EINA_LIBS@
-EVIL_CFLAGS = @EVIL_CFLAGS@
-EVIL_LIBS = @EVIL_LIBS@
-EXEEXT = @EXEEXT@
-EXOTIC_CFLAGS = @EXOTIC_CFLAGS@
-EXOTIC_LIBS = @EXOTIC_LIBS@
-FGREP = @FGREP@
-GNUTLS_CFLAGS = @GNUTLS_CFLAGS@
-GNUTLS_LIBS = @GNUTLS_LIBS@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-LD = @LD@
-LDFLAGS = @LDFLAGS@
-LIBGCRYPT_CFLAGS = @LIBGCRYPT_CFLAGS@
-LIBGCRYPT_CONFIG = @LIBGCRYPT_CONFIG@
-LIBGCRYPT_LIBS = @LIBGCRYPT_LIBS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LIPO = @LIPO@
-LN_S = @LN_S@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-MKDIR_P = @MKDIR_P@
-NM = @NM@
-NMEDIT = @NMEDIT@
-OBJDUMP = @OBJDUMP@
-OBJEXT = @OBJEXT@
-OPENSSL_CFLAGS = @OPENSSL_CFLAGS@
-OPENSSL_LIBS = @OPENSSL_LIBS@
-OTOOL = @OTOOL@
-OTOOL64 = @OTOOL64@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-PKG_CONFIG = @PKG_CONFIG@
-PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
-PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
-RANLIB = @RANLIB@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-STRIP = @STRIP@
-VERSION = @VERSION@
-VMAJ = @VMAJ@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-efl_doxygen = @efl_doxygen@
-efl_have_doxygen = @efl_have_doxygen@
-exec_prefix = @exec_prefix@
-have_lcov = @have_lcov@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-lt_ECHO = @lt_ECHO@
-lt_enable_auto_import = @lt_enable_auto_import@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-pkgconfig_requires_private = @pkgconfig_requires_private@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-release_info = @release_info@
-requirement_eet = @requirement_eet@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-version_info = @version_info@
-MAINTAINERCLEANFILES = Makefile.in
-SUBDIRS = lib bin tests examples
-all: all-recursive
-
-.SUFFIXES:
-$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
-        @for dep in $?; do \
-          case '$(am__configure_deps)' in \
-            *$$dep*) \
-              ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
-                && { if test -f $@; then exit 0; else break; fi; }; \
-              exit 1;; \
-          esac; \
-        done; \
-        echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu src/Makefile'; \
-        $(am__cd) $(top_srcdir) && \
-          $(AUTOMAKE) --gnu src/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-        @case '$?' in \
-          *config.status*) \
-            cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
-          *) \
-            echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
-            cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
-        esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-        cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure:  $(am__configure_deps)
-        cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
-        cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-
-mostlyclean-libtool:
-        -rm -f *.lo
-
-clean-libtool:
-        -rm -rf .libs _libs
-
-# This directory's subdirectories are mostly independent; you can cd
-# into them and run `make' without going through this Makefile.
-# To change the values of `make' variables: instead of editing Makefiles,
-# (1) if the variable is set in `config.status', edit `config.status'
-#     (which will cause the Makefiles to be regenerated when you run `make');
-# (2) otherwise, pass the desired values on the `make' command line.
-$(RECURSIVE_TARGETS):
-        @fail= failcom='exit 1'; \
-        for f in x $$MAKEFLAGS; do \
-          case $$f in \
-            *=* | --[!k]*);; \
-            *k*) failcom='fail=yes';; \
-          esac; \
-        done; \
-        dot_seen=no; \
-        target=`echo $@ | sed s/-recursive//`; \
-        list='$(SUBDIRS)'; for subdir in $$list; do \
-          echo "Making $$target in $$subdir"; \
-          if test "$$subdir" = "."; then \
-            dot_seen=yes; \
-            local_target="$$target-am"; \
-          else \
-            local_target="$$target"; \
-          fi; \
-          ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-          || eval $$failcom; \
-        done; \
-        if test "$$dot_seen" = "no"; then \
-          $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
-        fi; test -z "$$fail"
-
-$(RECURSIVE_CLEAN_TARGETS):
-        @fail= failcom='exit 1'; \
-        for f in x $$MAKEFLAGS; do \
-          case $$f in \
-            *=* | --[!k]*);; \
-            *k*) failcom='fail=yes';; \
-          esac; \
-        done; \
-        dot_seen=no; \
-        case "$@" in \
-          distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
-          *) list='$(SUBDIRS)' ;; \
-        esac; \
-        rev=''; for subdir in $$list; do \
-          if test "$$subdir" = "."; then :; else \
-            rev="$$subdir $$rev"; \
-          fi; \
-        done; \
-        rev="$$rev ."; \
-        target=`echo $@ | sed s/-recursive//`; \
-        for subdir in $$rev; do \
-          echo "Making $$target in $$subdir"; \
-          if test "$$subdir" = "."; then \
-            local_target="$$target-am"; \
-          else \
-            local_target="$$target"; \
-          fi; \
-          ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-          || eval $$failcom; \
-        done && test -z "$$fail"
-tags-recursive:
-        list='$(SUBDIRS)'; for subdir in $$list; do \
-          test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
-        done
-ctags-recursive:
-        list='$(SUBDIRS)'; for subdir in $$list; do \
-          test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
-        done
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
-        list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
-        unique=`for i in $$list; do \
-            if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-          done | \
-          $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-              END { if (nonempty) { for (i in files) print i; }; }'`; \
-        mkid -fID $$unique
-tags: TAGS
-
-TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
-                $(TAGS_FILES) $(LISP)
-        set x; \
-        here=`pwd`; \
-        if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
-          include_option=--etags-include; \
-          empty_fix=.; \
-        else \
-          include_option=--include; \
-          empty_fix=; \
-        fi; \
-        list='$(SUBDIRS)'; for subdir in $$list; do \
-          if test "$$subdir" = .; then :; else \
-            test ! -f $$subdir/TAGS || \
-              set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
-          fi; \
-        done; \
-        list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
-        unique=`for i in $$list; do \
-            if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-          done | \
-          $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-              END { if (nonempty) { for (i in files) print i; }; }'`; \
-        shift; \
-        if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
-          test -n "$$unique" || unique=$$empty_fix; \
-          if test $$# -gt 0; then \
-            $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-              "$$@" $$unique; \
-          else \
-            $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-              $$unique; \
-          fi; \
-        fi
-ctags: CTAGS
-CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
-                $(TAGS_FILES) $(LISP)
-        list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
-        unique=`for i in $$list; do \
-            if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-          done | \
-          $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-              END { if (nonempty) { for (i in files) print i; }; }'`; \
-        test -z "$(CTAGS_ARGS)$$unique" \
-          || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-             $$unique
-
-GTAGS:
-        here=`$(am__cd) $(top_builddir) && pwd` \
-          && $(am__cd) $(top_srcdir) \
-          && gtags -i $(GTAGS_ARGS) "$$here"
-
-distclean-tags:
-        -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-distdir: $(DISTFILES)
-        @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-        topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-        list='$(DISTFILES)'; \
-          dist_files=`for file in $$list; do echo $$file; done | \
-          sed -e "s|^$$srcdirstrip/||;t" \
-              -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
-        case $$dist_files in \
-          */*) $(MKDIR_P) `echo "$$dist_files" | \
-                           sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
-                           sort -u` ;; \
-        esac; \
-        for file in $$dist_files; do \
-          if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-          if test -d $$d/$$file; then \
-            dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
-            if test -d "$(distdir)/$$file"; then \
-              find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-            fi; \
-            if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-              cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
-              find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-            fi; \
-            cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
-          else \
-            test -f "$(distdir)/$$file" \
-            || cp -p $$d/$$file "$(distdir)/$$file" \
-            || exit 1; \
-          fi; \
-        done
-        @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
-          if test "$$subdir" = .; then :; else \
-            test -d "$(distdir)/$$subdir" \
-            || $(MKDIR_P) "$(distdir)/$$subdir" \
-            || exit 1; \
-          fi; \
-        done
-        @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
-          if test "$$subdir" = .; then :; else \
-            dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
-            $(am__relativize); \
-            new_distdir=$$reldir; \
-            dir1=$$subdir; dir2="$(top_distdir)"; \
-            $(am__relativize); \
-            new_top_distdir=$$reldir; \
-            echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
-            echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
-            ($(am__cd) $$subdir && \
-              $(MAKE) $(AM_MAKEFLAGS) \
-                top_distdir="$$new_top_distdir" \
-                distdir="$$new_distdir" \
-                am__remove_distdir=: \
-                am__skip_length_check=: \
-                am__skip_mode_fix=: \
-                distdir) \
-              || exit 1; \
-          fi; \
-        done
-check-am: all-am
-check: check-recursive
-all-am: Makefile
-installdirs: installdirs-recursive
-installdirs-am:
-install: install-recursive
-install-exec: install-exec-recursive
-install-data: install-data-recursive
-uninstall: uninstall-recursive
-
-install-am: all-am
-        @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-recursive
-install-strip:
-        $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-          install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-          `test -z '$(STRIP)' || \
-            echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-        -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-        -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
-        @echo "This command is intended for maintainers to use"
-        @echo "it deletes files that may require special tools to rebuild."
-        -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
-clean: clean-recursive
-
-clean-am: clean-generic clean-libtool mostlyclean-am
-
-distclean: distclean-recursive
-        -rm -f Makefile
-distclean-am: clean-am distclean-generic distclean-tags
-
-dvi: dvi-recursive
-
-dvi-am:
-
-html: html-recursive
-
-html-am:
-
-info: info-recursive
-
-info-am:
-
-install-data-am:
-
-install-dvi: install-dvi-recursive
-
-install-dvi-am:
-
-install-exec-am:
-
-install-html: install-html-recursive
-
-install-html-am:
-
-install-info: install-info-recursive
-
-install-info-am:
-
-install-man:
-
-install-pdf: install-pdf-recursive
-
-install-pdf-am:
-
-install-ps: install-ps-recursive
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-recursive
-        -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-recursive
-
-mostlyclean-am: mostlyclean-generic mostlyclean-libtool
-
-pdf: pdf-recursive
-
-pdf-am:
-
-ps: ps-recursive
-
-ps-am:
-
-uninstall-am:
-
-.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \
-        install-am install-strip tags-recursive
-
-.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
-        all all-am check check-am clean clean-generic clean-libtool \
-        ctags ctags-recursive distclean distclean-generic \
-        distclean-libtool distclean-tags distdir dvi dvi-am html \
-        html-am info info-am install install-am install-data \
-        install-data-am install-dvi install-dvi-am install-exec \
-        install-exec-am install-html install-html-am install-info \
-        install-info-am install-man install-pdf install-pdf-am \
-        install-ps install-ps-am install-strip installcheck \
-        installcheck-am installdirs installdirs-am maintainer-clean \
-        maintainer-clean-generic mostlyclean mostlyclean-generic \
-        mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \
-        uninstall uninstall-am
-
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/libraries/eet/src/bin/Makefile.am b/libraries/eet/src/bin/Makefile.am
deleted file mode 100644
index 89c68f1..0000000
--- a/libraries/eet/src/bin/Makefile.am
+++ /dev/null
@@ -1,21 +0,0 @@
-
-MAINTAINERCLEANFILES = Makefile.in
-
-AM_CPPFLAGS = \
--I$(top_srcdir) \
--I$(top_srcdir)/bin \
--I$(top_srcdir)/src/lib \
--DPACKAGE_BIN_DIR=\"$(bindir)\" \
--DPACKAGE_LIB_DIR=\"$(libdir)\" \
--DPACKAGE_DATA_DIR=\"$(datadir)/$(PACKAGE)\" \
-@EET_CPPFLAGS@ \
-@EINA_CFLAGS@ \
-@EVIL_CFLAGS@
-
-bin_PROGRAMS = @EET_PRG@
-EXTRA_PROGRAMS = eet
-
-eet_SOURCES = eet_main.c
-eet_CFLAGS = @EET_CFLAGS@
-eet_LDADD = $(top_builddir)/src/lib/libeet.la @EINA_LIBS@ @EVIL_LIBS@ @EXOTIC_LIBS@
-eet_LDFLAGS = @lt_enable_auto_import@
diff --git a/libraries/eet/src/bin/Makefile.in b/libraries/eet/src/bin/Makefile.in
deleted file mode 100644
index a7e94cb..0000000
--- a/libraries/eet/src/bin/Makefile.in
+++ /dev/null
@@ -1,607 +0,0 @@
-# Makefile.in generated by automake 1.11.1 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
-# Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-VPATH = @srcdir@
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-EXTRA_PROGRAMS = eet$(EXEEXT)
-subdir = src/bin
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/ac_attribute.m4 \
-        $(top_srcdir)/m4/ac_path_generic.m4 \
-        $(top_srcdir)/m4/efl_binary.m4 \
-        $(top_srcdir)/m4/efl_compiler_flag.m4 \
-        $(top_srcdir)/m4/efl_coverage.m4 \
-        $(top_srcdir)/m4/efl_doxygen.m4 \
-        $(top_srcdir)/m4/efl_fnmatch.m4 \
-        $(top_srcdir)/m4/efl_path_max.m4 $(top_srcdir)/m4/efl_tests.m4 \
-        $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
-        $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
-        $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-        $(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/config.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-am__installdirs = "$(DESTDIR)$(bindir)"
-PROGRAMS = $(bin_PROGRAMS)
-am_eet_OBJECTS = eet-eet_main.$(OBJEXT)
-eet_OBJECTS = $(am_eet_OBJECTS)
-eet_DEPENDENCIES = $(top_builddir)/src/lib/libeet.la
-AM_V_lt = $(am__v_lt_$(V))
-am__v_lt_ = $(am__v_lt_$(AM_DEFAULT_VERBOSITY))
-am__v_lt_0 = --silent
-eet_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
-        $(LIBTOOLFLAGS) --mode=link $(CCLD) $(eet_CFLAGS) $(CFLAGS) \
-        $(eet_LDFLAGS) $(LDFLAGS) -o $@
-DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)
-depcomp = $(SHELL) $(top_srcdir)/depcomp
-am__depfiles_maybe = depfiles
-am__mv = mv -f
-COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
-        $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
-        $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \
-        $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
-        $(AM_CFLAGS) $(CFLAGS)
-AM_V_CC = $(am__v_CC_$(V))
-am__v_CC_ = $(am__v_CC_$(AM_DEFAULT_VERBOSITY))
-am__v_CC_0 = @echo "  CC    " $@;
-AM_V_at = $(am__v_at_$(V))
-am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
-am__v_at_0 = @
-CCLD = $(CC)
-LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
-        $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
-        $(AM_LDFLAGS) $(LDFLAGS) -o $@
-AM_V_CCLD = $(am__v_CCLD_$(V))
-am__v_CCLD_ = $(am__v_CCLD_$(AM_DEFAULT_VERBOSITY))
-am__v_CCLD_0 = @echo "  CCLD  " $@;
-AM_V_GEN = $(am__v_GEN_$(V))
-am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
-am__v_GEN_0 = @echo "  GEN   " $@;
-SOURCES = $(eet_SOURCES)
-DIST_SOURCES = $(eet_SOURCES)
-ETAGS = etags
-CTAGS = ctags
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-ALLOCA = @ALLOCA@
-AMTAR = @AMTAR@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AR = @AR@
-AS = @AS@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CHECK_CFLAGS = @CHECK_CFLAGS@
-CHECK_LIBS = @CHECK_LIBS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEBUG_CFLAGS = @DEBUG_CFLAGS@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DLLTOOL = @DLLTOOL@
-DSYMUTIL = @DSYMUTIL@
-DUMPBIN = @DUMPBIN@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EET_CFLAGS = @EET_CFLAGS@
-EET_CPPFLAGS = @EET_CPPFLAGS@
-EET_LIBS = @EET_LIBS@
-EET_PRG = @EET_PRG@
-EFL_COVERAGE_CFLAGS = @EFL_COVERAGE_CFLAGS@
-EFL_COVERAGE_LIBS = @EFL_COVERAGE_LIBS@
-EFL_EET_BUILD = @EFL_EET_BUILD@
-EFL_FNMATCH_LIBS = @EFL_FNMATCH_LIBS@
-EGREP = @EGREP@
-EINA_CFLAGS = @EINA_CFLAGS@
-EINA_LIBS = @EINA_LIBS@
-EVIL_CFLAGS = @EVIL_CFLAGS@
-EVIL_LIBS = @EVIL_LIBS@
-EXEEXT = @EXEEXT@
-EXOTIC_CFLAGS = @EXOTIC_CFLAGS@
-EXOTIC_LIBS = @EXOTIC_LIBS@
-FGREP = @FGREP@
-GNUTLS_CFLAGS = @GNUTLS_CFLAGS@
-GNUTLS_LIBS = @GNUTLS_LIBS@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-LD = @LD@
-LDFLAGS = @LDFLAGS@
-LIBGCRYPT_CFLAGS = @LIBGCRYPT_CFLAGS@
-LIBGCRYPT_CONFIG = @LIBGCRYPT_CONFIG@
-LIBGCRYPT_LIBS = @LIBGCRYPT_LIBS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LIPO = @LIPO@
-LN_S = @LN_S@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-MKDIR_P = @MKDIR_P@
-NM = @NM@
-NMEDIT = @NMEDIT@
-OBJDUMP = @OBJDUMP@
-OBJEXT = @OBJEXT@
-OPENSSL_CFLAGS = @OPENSSL_CFLAGS@
-OPENSSL_LIBS = @OPENSSL_LIBS@
-OTOOL = @OTOOL@
-OTOOL64 = @OTOOL64@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-PKG_CONFIG = @PKG_CONFIG@
-PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
-PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
-RANLIB = @RANLIB@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-STRIP = @STRIP@
-VERSION = @VERSION@
-VMAJ = @VMAJ@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-efl_doxygen = @efl_doxygen@
-efl_have_doxygen = @efl_have_doxygen@
-exec_prefix = @exec_prefix@
-have_lcov = @have_lcov@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-lt_ECHO = @lt_ECHO@
-lt_enable_auto_import = @lt_enable_auto_import@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-pkgconfig_requires_private = @pkgconfig_requires_private@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-release_info = @release_info@
-requirement_eet = @requirement_eet@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-version_info = @version_info@
-MAINTAINERCLEANFILES = Makefile.in
-AM_CPPFLAGS = \
--I$(top_srcdir) \
--I$(top_srcdir)/bin \
--I$(top_srcdir)/src/lib \
--DPACKAGE_BIN_DIR=\"$(bindir)\" \
--DPACKAGE_LIB_DIR=\"$(libdir)\" \
--DPACKAGE_DATA_DIR=\"$(datadir)/$(PACKAGE)\" \
-@EET_CPPFLAGS@ \
-@EINA_CFLAGS@ \
-@EVIL_CFLAGS@
-
-bin_PROGRAMS = @EET_PRG@
-eet_SOURCES = eet_main.c
-eet_CFLAGS = @EET_CFLAGS@
-eet_LDADD = $(top_builddir)/src/lib/libeet.la @EINA_LIBS@ @EVIL_LIBS@ @EXOTIC_LIBS@
-eet_LDFLAGS = @lt_enable_auto_import@
-all: all-am
-
-.SUFFIXES:
-.SUFFIXES: .c .lo .o .obj
-$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
-        @for dep in $?; do \
-          case '$(am__configure_deps)' in \
-            *$$dep*) \
-              ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
-                && { if test -f $@; then exit 0; else break; fi; }; \
-              exit 1;; \
-          esac; \
-        done; \
-        echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu src/bin/Makefile'; \
-        $(am__cd) $(top_srcdir) && \
-          $(AUTOMAKE) --gnu src/bin/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-        @case '$?' in \
-          *config.status*) \
-            cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
-          *) \
-            echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
-            cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
-        esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-        cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure:  $(am__configure_deps)
-        cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
-        cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-install-binPROGRAMS: $(bin_PROGRAMS)
-        @$(NORMAL_INSTALL)
-        test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)"
-        @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
-        for p in $$list; do echo "$$p $$p"; done | \
-        sed 's/$(EXEEXT)$$//' | \
-        while read p p1; do if test -f $$p || test -f $$p1; \
-          then echo "$$p"; echo "$$p"; else :; fi; \
-        done | \
-        sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \
-            -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
-        sed 'N;N;N;s,\n, ,g' | \
-        $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
-          { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
-            if ($$2 == $$4) files[d] = files[d] " " $$1; \
-            else { print "f", $$3 "/" $$4, $$1; } } \
-          END { for (d in files) print "f", d, files[d] }' | \
-        while read type dir files; do \
-            if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
-            test -z "$$files" || { \
-            echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
-            $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
-            } \
-        ; done
-
-uninstall-binPROGRAMS:
-        @$(NORMAL_UNINSTALL)
-        @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
-        files=`for p in $$list; do echo "$$p"; done | \
-          sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
-              -e 's/$$/$(EXEEXT)/' `; \
-        test -n "$$list" || exit 0; \
-        echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
-        cd "$(DESTDIR)$(bindir)" && rm -f $$files
-
-clean-binPROGRAMS:
-        @list='$(bin_PROGRAMS)'; test -n "$$list" || exit 0; \
-        echo " rm -f" $$list; \
-        rm -f $$list || exit $$?; \
-        test -n "$(EXEEXT)" || exit 0; \
-        list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
-        echo " rm -f" $$list; \
-        rm -f $$list
-eet$(EXEEXT): $(eet_OBJECTS) $(eet_DEPENDENCIES) 
-        @rm -f eet$(EXEEXT)
-        $(AM_V_CCLD)$(eet_LINK) $(eet_OBJECTS) $(eet_LDADD) $(LIBS)
-
-mostlyclean-compile:
-        -rm -f *.$(OBJEXT)
-
-distclean-compile:
-        -rm -f *.tab.c
-
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eet-eet_main.Po@am__quote@
-
-.c.o:
-@am__fastdepCC_TRUE@    $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@    $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@am__fastdepCC_FALSE@   $(AM_V_CC) @AM_BACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@       source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@       DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@   $(COMPILE) -c $<
-
-.c.obj:
-@am__fastdepCC_TRUE@    $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@    $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@am__fastdepCC_FALSE@   $(AM_V_CC) @AM_BACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@       source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@       DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@   $(COMPILE) -c `$(CYGPATH_W) '$<'`
-
-.c.lo:
-@am__fastdepCC_TRUE@    $(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@    $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
-@am__fastdepCC_FALSE@   $(AM_V_CC) @AM_BACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@       source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@       DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@   $(LTCOMPILE) -c -o $@ $<
-
-eet-eet_main.o: eet_main.c
-@am__fastdepCC_TRUE@    $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(eet_CFLAGS) $(CFLAGS) -MT eet-eet_main.o -MD -MP -MF $(DEPDIR)/eet-eet_main.Tpo -c -o eet-eet_main.o `test -f 'eet_main.c' || echo '$(srcdir)/'`eet_main.c
-@am__fastdepCC_TRUE@    $(AM_V_at)$(am__mv) $(DEPDIR)/eet-eet_main.Tpo $(DEPDIR)/eet-eet_main.Po
-@am__fastdepCC_FALSE@   $(AM_V_CC) @AM_BACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@       source='eet_main.c' object='eet-eet_main.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@       DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@   $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(eet_CFLAGS) $(CFLAGS) -c -o eet-eet_main.o `test -f 'eet_main.c' || echo '$(srcdir)/'`eet_main.c
-
-eet-eet_main.obj: eet_main.c
-@am__fastdepCC_TRUE@    $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(eet_CFLAGS) $(CFLAGS) -MT eet-eet_main.obj -MD -MP -MF $(DEPDIR)/eet-eet_main.Tpo -c -o eet-eet_main.obj `if test -f 'eet_main.c'; then $(CYGPATH_W) 'eet_main.c'; else $(CYGPATH_W) '$(srcdir)/eet_main.c'; fi`
-@am__fastdepCC_TRUE@    $(AM_V_at)$(am__mv) $(DEPDIR)/eet-eet_main.Tpo $(DEPDIR)/eet-eet_main.Po
-@am__fastdepCC_FALSE@   $(AM_V_CC) @AM_BACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@       source='eet_main.c' object='eet-eet_main.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@       DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@   $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(eet_CFLAGS) $(CFLAGS) -c -o eet-eet_main.obj `if test -f 'eet_main.c'; then $(CYGPATH_W) 'eet_main.c'; else $(CYGPATH_W) '$(srcdir)/eet_main.c'; fi`
-
-mostlyclean-libtool:
-        -rm -f *.lo
-
-clean-libtool:
-        -rm -rf .libs _libs
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
-        list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
-        unique=`for i in $$list; do \
-            if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-          done | \
-          $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-              END { if (nonempty) { for (i in files) print i; }; }'`; \
-        mkid -fID $$unique
-tags: TAGS
-
-TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
-                $(TAGS_FILES) $(LISP)
-        set x; \
-        here=`pwd`; \
-        list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
-        unique=`for i in $$list; do \
-            if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-          done | \
-          $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-              END { if (nonempty) { for (i in files) print i; }; }'`; \
-        shift; \
-        if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
-          test -n "$$unique" || unique=$$empty_fix; \
-          if test $$# -gt 0; then \
-            $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-              "$$@" $$unique; \
-          else \
-            $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-              $$unique; \
-          fi; \
-        fi
-ctags: CTAGS
-CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
-                $(TAGS_FILES) $(LISP)
-        list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
-        unique=`for i in $$list; do \
-            if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-          done | \
-          $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-              END { if (nonempty) { for (i in files) print i; }; }'`; \
-        test -z "$(CTAGS_ARGS)$$unique" \
-          || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-             $$unique
-
-GTAGS:
-        here=`$(am__cd) $(top_builddir) && pwd` \
-          && $(am__cd) $(top_srcdir) \
-          && gtags -i $(GTAGS_ARGS) "$$here"
-
-distclean-tags:
-        -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-distdir: $(DISTFILES)
-        @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-        topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-        list='$(DISTFILES)'; \
-          dist_files=`for file in $$list; do echo $$file; done | \
-          sed -e "s|^$$srcdirstrip/||;t" \
-              -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
-        case $$dist_files in \
-          */*) $(MKDIR_P) `echo "$$dist_files" | \
-                           sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
-                           sort -u` ;; \
-        esac; \
-        for file in $$dist_files; do \
-          if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-          if test -d $$d/$$file; then \
-            dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
-            if test -d "$(distdir)/$$file"; then \
-              find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-            fi; \
-            if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-              cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
-              find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-            fi; \
-            cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
-          else \
-            test -f "$(distdir)/$$file" \
-            || cp -p $$d/$$file "$(distdir)/$$file" \
-            || exit 1; \
-          fi; \
-        done
-check-am: all-am
-check: check-am
-all-am: Makefile $(PROGRAMS)
-installdirs:
-        for dir in "$(DESTDIR)$(bindir)"; do \
-          test -z "$$dir" || $(MKDIR_P) "$$dir"; \
-        done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
-        @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
-        $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-          install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-          `test -z '$(STRIP)' || \
-            echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-        -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-        -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
-        @echo "This command is intended for maintainers to use"
-        @echo "it deletes files that may require special tools to rebuild."
-        -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
-clean: clean-am
-
-clean-am: clean-binPROGRAMS clean-generic clean-libtool mostlyclean-am
-
-distclean: distclean-am
-        -rm -rf ./$(DEPDIR)
-        -rm -f Makefile
-distclean-am: clean-am distclean-compile distclean-generic \
-        distclean-tags
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am:
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am: install-binPROGRAMS
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man:
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
-        -rm -rf ./$(DEPDIR)
-        -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-compile mostlyclean-generic \
-        mostlyclean-libtool
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-binPROGRAMS
-
-.MAKE: install-am install-strip
-
-.PHONY: CTAGS GTAGS all all-am check check-am clean clean-binPROGRAMS \
-        clean-generic clean-libtool ctags distclean distclean-compile \
-        distclean-generic distclean-libtool distclean-tags distdir dvi \
-        dvi-am html html-am info info-am install install-am \
-        install-binPROGRAMS install-data install-data-am install-dvi \
-        install-dvi-am install-exec install-exec-am install-html \
-        install-html-am install-info install-info-am install-man \
-        install-pdf install-pdf-am install-ps install-ps-am \
-        install-strip installcheck installcheck-am installdirs \
-        maintainer-clean maintainer-clean-generic mostlyclean \
-        mostlyclean-compile mostlyclean-generic mostlyclean-libtool \
-        pdf pdf-am ps ps-am tags uninstall uninstall-am \
-        uninstall-binPROGRAMS
-
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/libraries/eet/src/bin/eet_main.c b/libraries/eet/src/bin/eet_main.c
deleted file mode 100644
index 8a93d11..0000000
--- a/libraries/eet/src/bin/eet_main.c
+++ /dev/null
@@ -1,507 +0,0 @@
-#ifdef HAVE_CONFIG_H
-# include <config.h>
-#endif /* ifdef HAVE_CONFIG_H */
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-
-#ifdef HAVE_UNISTD_H
-# include <unistd.h>
-#endif /* ifdef HAVE_UNISTD_H */
-
-#ifdef HAVE_EVIL
-# include <Evil.h>
-#endif /* ifdef HAVE_EVIL */
-
-#include <Eet.h>
-
-static int _eet_main_log_dom = -1;
-
-#ifdef EET_DEFAULT_LOG_COLOR
-#undef EET_DEFAULT_LOG_COLOR
-#endif /* ifdef EET_DEFAULT_LOG_COLOR */
-#define EET_DEFAULT_LOG_COLOR EINA_COLOR_CYAN
-#ifdef ERR
-#undef ERR
-#endif /* ifdef ERR */
-#define ERR(...)  EINA_LOG_DOM_ERR(_eet_main_log_dom, __VA_ARGS__)
-#ifdef DBG
-#undef DBG
-#endif /* ifdef DBG */
-#define DBG(...)  EINA_LOG_DOM_DBG(_eet_main_log_dom, __VA_ARGS__)
-#ifdef INF
-#undef INF
-#endif /* ifdef INF */
-#define INF(...)  EINA_LOG_DOM_INFO(_eet_main_log_dom, __VA_ARGS__)
-#ifdef WRN
-#undef WRN
-#endif /* ifdef WRN */
-#define WRN(...)  EINA_LOG_DOM_WARN(_eet_main_log_dom, __VA_ARGS__)
-#ifdef CRIT
-#undef CRIT
-#endif /* ifdef CRIT */
-#define CRIT(...) EINA_LOG_DOM_CRIT(_eet_main_log_dom, __VA_ARGS__)
-
-static void
-do_eet_list(const char *file)
-{
-   int i, num;
-   char **list;
-   Eet_File *ef;
-
-   ef = eet_open(file, EET_FILE_MODE_READ);
-   if (!ef)
-     {
-        ERR("cannot open for reading: %s", file);
-        exit(-1);
-     }
-
-   list = eet_list(ef, "*", &num);
-   if (list)
-     {
-        for (i = 0; i < num; i++)
-          printf("%s\n", list[i]);
-        free(list);
-     }
-
-   eet_close(ef);
-} /* do_eet_list */
-
-static void
-do_eet_stats(const char *file)
-{
-   int i, num;
-   int count[2] = { 0, 0 };
-   int size[2] = { 0, 0 };
-   char **list;
-   Eet_File *ef;
-   Eet_Dictionary *ed;
-
-   ef = eet_open(file, EET_FILE_MODE_READ);
-   if (!ef)
-     {
-        ERR("cannot open for reading: %s", file);
-        exit(-1);
-     }
-
-   printf("*** sections stats ***\n");
-   list = eet_list(ef, "*", &num);
-   if (list)
-     {
-        for (i = 0; i < num; i++)
-          {
-             const void *ro = NULL;
-             void *rw = NULL;
-             int tsize;
-
-             ro = eet_read_direct(ef, list[i], &tsize);
-             if (!ro) rw = eet_read(ef, list[i], &tsize);
-             printf(rw ? "%s of size %i is compressed.\n" : "%s of size %i is not compressed.\n", list[i], tsize);
-             count[rw ? 0 : 1]++;
-             size[rw ? 0 : 1] += tsize;
-             free(rw);
-          }
-        free(list);
-     }
-
-   printf("*** dictionary ***\n");
-   ed = eet_dictionary_get(ef);
-   if (ed)
-     {
-        printf("%i strings inside the dictionary.\n", eet_dictionary_count(ed));
-     }
-   else
-     {
-        printf("no dictionary in this file.\n");
-     }
-   printf("*** global ***\n");
-   printf("%i sections\n", num);
-   printf("- %i of them are compressed (%02.2f%%) expanding in %i bytes.\n",
-          count[0], (float) count[0] * 100 / (float) num, size[0]);
-   printf("- %i of them are directly mappable in memory (%02.2f%%) representing %i bytes.\n",
-          count[1], (float) count[1] * 100 / (float) num, size[1]);
-
-   eet_close(ef);
-}
-
-static void
-do_eet_extract(const char *file,
-               const char *key,
-               const char *out,
-               const char *crypto_key)
-{
-   Eet_File *ef;
-   void *data;
-   int size = 0;
-   FILE *f = stdout;
-
-   ef = eet_open(file, EET_FILE_MODE_READ);
-   if (!ef)
-     {
-        ERR("cannot open for reading: %s", file);
-        exit(-1);
-     }
-
-   data = eet_read_cipher(ef, key, &size, crypto_key);
-   if (!data)
-     {
-        ERR("cannot read key %s", key);
-        exit(-1);
-     }
-
-   if (out)
-     {
-        f = fopen(out, "wb");
-        if (!f)
-          {
-             ERR("cannot open %s", out);
-             exit(-1);
-          }
-     }
-
-   if (fwrite(data, size, 1, f) != 1)
-     {
-        ERR("cannot write to %s", out ? out : "standard output");
-        exit(-1);
-     }
-
-   if (out) fclose(f);
-   free(data);
-   eet_close(ef);
-} /* do_eet_extract */
-
-static void
-do_eet_decode_dump(void       *data,
-                   const char *str)
-{
-   fputs(str, (FILE *)data);
-} /* do_eet_decode_dump */
-
-static void
-do_eet_decode(const char *file,
-              const char *key,
-              const char *out,
-              const char *crypto_key)
-{
-   Eet_File *ef;
-   FILE *f = stdout;
-
-   ef = eet_open(file, EET_FILE_MODE_READ);
-   if (!ef)
-     {
-        ERR("cannot open for reading: %s", file);
-        exit(-1);
-     }
-
-   if (out)
-     {
-        f = fopen(out, "wb");
-        if (!f)
-          {
-             ERR("cannot open %s", out);
-             exit(-1);
-          }
-     }
-
-   if (!eet_data_dump_cipher(ef, key, crypto_key, do_eet_decode_dump, f))
-     {
-        ERR("cannot write to %s", out ? out : "standard output");
-        exit(-1);
-     }
-
-   if (out) fclose(f);
-   eet_close(ef);
-} /* do_eet_decode */
-
-static void
-do_eet_insert(const char *file,
-              const char *key,
-              const char *out,
-              int         compress,
-              const char *crypto_key)
-{
-   Eet_File *ef;
-   void *data;
-   int size = 0;
-   FILE *f;
-
-   ef = eet_open(file, EET_FILE_MODE_READ_WRITE);
-   if (!ef)
-     ef = eet_open(file, EET_FILE_MODE_WRITE);
-
-   if (!ef)
-     {
-        ERR("cannot open for read+write: %s", file);
-        exit(-1);
-     }
-
-   f = fopen(out, "rb");
-   if (!f)
-     {
-        ERR("cannot open %s", out);
-        exit(-1);
-     }
-
-   fseek(f, 0, SEEK_END);
-   size = ftell(f);
-   rewind(f);
-   data = malloc(size);
-   if (!data)
-     {
-        ERR("cannot allocate %i bytes", size);
-        exit(-1);
-     }
-
-   if (fread(data, size, 1, f) != 1)
-     {
-        ERR("cannot read file %s", out);
-        exit(-1);
-     }
-
-   fclose(f);
-   eet_write_cipher(ef, key, data, size, compress, crypto_key);
-   free(data);
-   eet_close(ef);
-} /* do_eet_insert */
-
-static void
-do_eet_encode(const char *file,
-              const char *key,
-              const char *out,
-              int         compress,
-              const char *crypto_key)
-{
-   Eet_File *ef;
-   char *text;
-   int textlen = 0;
-   int size = 0;
-   FILE *f;
-
-   ef = eet_open(file, EET_FILE_MODE_READ_WRITE);
-   if (!ef)
-     ef = eet_open(file, EET_FILE_MODE_WRITE);
-
-   if (!ef)
-     {
-        ERR("cannot open for read+write: %s", file);
-        exit(-1);
-     }
-
-   f = fopen(out, "rb");
-   if (!f)
-     {
-        ERR("cannot open %s", out);
-        exit(-1);
-     }
-
-   fseek(f, 0, SEEK_END);
-   textlen = ftell(f);
-   rewind(f);
-   text = malloc(textlen);
-   if (!text)
-     {
-        ERR("cannot allocate %i bytes", size);
-        exit(-1);
-     }
-
-   if (fread(text, textlen, 1, f) != 1)
-     {
-        ERR("cannot read file %s", out);
-        exit(-1);
-     }
-
-   fclose(f);
-   if (!eet_data_undump_cipher(ef, key, crypto_key, text, textlen, compress))
-     {
-        ERR("cannot parse %s", out);
-        exit(-1);
-     }
-
-   free(text);
-   eet_close(ef);
-} /* do_eet_encode */
-
-static void
-do_eet_remove(const char *file,
-              const char *key)
-{
-   Eet_File *ef;
-
-   ef = eet_open(file, EET_FILE_MODE_READ_WRITE);
-   if (!ef)
-     {
-        ERR("cannot open for read+write: %s", file);
-        exit(-1);
-     }
-
-   eet_delete(ef, key);
-   eet_close(ef);
-} /* do_eet_remove */
-
-static void
-do_eet_check(const char *file)
-{
-   Eet_File *ef;
-   const void *der;
-   int der_length;
-   int sign_length;
-
-   ef = eet_open(file, EET_FILE_MODE_READ);
-   if (!ef)
-     {
-        ERR("checking signature of `%s` failed", file);
-        exit(-1);
-     }
-
-   der = eet_identity_x509(ef, &der_length);
-
-   fprintf(stdout, "Certificate length %i.\n", der_length);
-   eet_identity_certificate_print(der, der_length, stdout);
-
-   eet_identity_signature(ef, &sign_length);
-   fprintf(stdout, "Signature length %i.\n", sign_length);
-
-   eet_close(ef);
-} /* do_eet_check */
-
-static void
-do_eet_sign(const char *file,
-            const char *private_key,
-            const char *public_key)
-{
-   Eet_File *ef;
-   Eet_Key *key;
-
-   ef = eet_open(file, EET_FILE_MODE_READ_WRITE);
-   if (!ef)
-     {
-        ERR("cannot open for read+write: %s.", file);
-        exit(-1);
-     }
-
-   key = eet_identity_open(public_key, private_key, NULL);
-   if (!key)
-     {
-        ERR("cannot open key '%s:%s'.", public_key, private_key);
-        exit(-1);
-     }
-
-   fprintf(stdout, "Using the following key to sign `%s`.\n", file);
-   eet_identity_print(key, stdout);
-
-   eet_identity_set(ef, key);
-
-   eet_close(ef);
-} /* do_eet_sign */
-
-int
-main(int    argc,
-     char **argv)
-{
-   if (!eet_init())
-     return -1;
-
-   _eet_main_log_dom = eina_log_domain_register("eet_main", EINA_COLOR_CYAN);
-   if(_eet_main_log_dom < -1)
-     {
-        EINA_LOG_ERR("Impossible to create a log domain for eet_main.");
-        eet_shutdown();
-        return -1;
-     }
-
-   if (argc < 2)
-     {
-help:
-        printf(
-          "Usage:\n"
-          "  eet -l FILE.EET                                    list all keys in FILE.EET\n"
-          "  eet -x FILE.EET KEY [OUT-FILE] [CRYPTO_KEY]        extract data stored in KEY in FILE.EET and write to OUT-FILE or standard output\n"
-          "  eet -d FILE.EET KEY [OUT-FILE] [CRYPTO_KEY]        extract and decode data stored in KEY in FILE.EET and write to OUT-FILE or standard output\n"
-          "  eet -i FILE.EET KEY IN-FILE COMPRESS [CRYPTO_KEY]  insert data to KEY in FILE.EET from IN-FILE and if COMPRESS is 1, compress it\n"
-          "  eet -e FILE.EET KEY IN-FILE COMPRESS [CRYPTO_KEY]  insert and encode to KEY in FILE.EET from IN-FILE and if COMPRESS is 1, compress it\n"
-          "  eet -r FILE.EET KEY                                remove KEY in FILE.EET\n"
-          "  eet -c FILE.EET                                    report and check the signature information of an eet file\n"
-          "  eet -s FILE.EET PRIVATE_KEY PUBLIC_KEY             sign FILE.EET with PRIVATE_KEY and attach PUBLIC_KEY as it's certificate\n"
-          "  eet -t FILE.EET                                    give some statistic about a file\n"
-          );
-        eet_shutdown();
-        return -1;
-     }
-
-   if ((!strncmp(argv[1], "-h", 2)))
-     goto help;
-   else if ((!strcmp(argv[1], "-l")) && (argc > 2))
-     do_eet_list(argv[2]);
-   else if ((!strcmp(argv[1], "-x")) && (argc > 3))
-     {
-        switch (argc)
-          {
-           case 4:
-             {
-               do_eet_extract(argv[2], argv[3], NULL, NULL);
-               break;
-             }
-           case 5:
-             {
-               do_eet_extract(argv[2], argv[3], argv[4], NULL);
-               break;
-             }
-           default:
-             {
-               do_eet_extract(argv[2], argv[3], argv[4], argv[5]);
-               break;
-             }
-          }
-     }
-   else if ((!strcmp(argv[1], "-d")) && (argc > 3))
-     {
-        switch (argc)
-          {
-           case 4:
-             {
-               do_eet_decode(argv[2], argv[3], NULL, NULL);
-               break;
-             }
-           case 5:
-             {
-               do_eet_decode(argv[2], argv[3], argv[4], NULL);
-               break;
-             }
-           default:
-             {
-               do_eet_decode(argv[2], argv[3], argv[4], argv[5]);
-               break;
-             }
-          }
-     }
-   else if ((!strcmp(argv[1], "-i")) && (argc > 5))
-     {
-        if (argc > 6)
-          do_eet_insert(argv[2], argv[3], argv[4], atoi(argv[5]), argv[6]);
-        else
-          do_eet_insert(argv[2], argv[3], argv[4], atoi(argv[5]), NULL);
-     }
-   else if ((!strcmp(argv[1], "-e")) && (argc > 5))
-     {
-        if (argc > 6)
-          do_eet_encode(argv[2], argv[3], argv[4], atoi(argv[5]), argv[6]);
-        else
-          do_eet_encode(argv[2], argv[3], argv[4], atoi(argv[5]), NULL);
-     }
-   else if ((!strcmp(argv[1], "-r")) && (argc > 3))
-     do_eet_remove(argv[2], argv[3]);
-   else if ((!strcmp(argv[1], "-c")) && (argc > 2))
-     do_eet_check(argv[2]);
-   else if ((!strcmp(argv[1], "-s")) && (argc > 4))
-     do_eet_sign(argv[2], argv[3], argv[4]);
-   else if ((!strcmp(argv[1], "-t")) && (argc > 2))
-     do_eet_stats(argv[2]);
-   else
-     goto help;
-
-   eina_log_domain_unregister(_eet_main_log_dom);
-   eet_shutdown();
-   return 0;
-} /* main */
-
diff --git a/libraries/eet/src/examples/Makefile.am b/libraries/eet/src/examples/Makefile.am
deleted file mode 100644
index 6c5a324..0000000
--- a/libraries/eet/src/examples/Makefile.am
+++ /dev/null
@@ -1,50 +0,0 @@
-MAINTAINERCLEANFILES = Makefile.in
-
-examplesdir = $(datadir)/$(PACKAGE)/examples
-
-if BUILD_EXAMPLES
-AM_CPPFLAGS = \
--I. \
--I$(top_srcdir)/src/lib \
-@EINA_CFLAGS@
-
-examples_PROGRAMS = eet_basic eet_file eet_data_simple eet_data_nested eet_data_file_descriptor_01 eet_data_file_descriptor_02 eet_data_cipher_decipher
-
-eet_basic_SOURCES = eet-basic.c
-eet_basic_LDADD = $(top_builddir)/src/lib/libeet.la @EINA_LIBS@
-
-eet_file_SOURCES = eet-file.c
-eet_file_LDADD = $(top_builddir)/src/lib/libeet.la @EINA_LIBS@
-
-eet_data_simple_SOURCES = eet-data-simple.c
-eet_data_simple_LDADD = $(top_builddir)/src/lib/libeet.la @EINA_LIBS@
-
-eet_data_nested_SOURCES = eet-data-nested.c
-eet_data_nested_LDADD = $(top_builddir)/src/lib/libeet.la @EINA_LIBS@
-
-eet_data_file_descriptor_01_SOURCES = eet-data-file_descriptor_01.c
-eet_data_file_descriptor_01_LDADD = $(top_builddir)/src/lib/libeet.la @EINA_LIBS@
-
-eet_data_file_descriptor_02_SOURCES = eet-data-file_descriptor_02.c
-eet_data_file_descriptor_02_LDADD = $(top_builddir)/src/lib/libeet.la @EINA_LIBS@
-
-eet_data_cipher_decipher_SOURCES = eet-data-cipher_decipher.c
-eet_data_cipher_decipher_LDADD = $(top_builddir)/src/lib/libeet.la @EINA_LIBS@
-
-endif
-
-filesdir = $(datadir)/$(PACKAGE)/examples
-files_DATA =
-
-if INSTALL_EXAMPLES
-
-files_DATA += \
-eet-basic.c \
-eet-file.c \
-eet-data-simple.c \
-eet-data-nested.c \
-eet-data-file_descriptor_01.c \
-eet-data-file_descriptor_02.c \
-eet-data-cipher_decipher.c
-
-endif
diff --git a/libraries/eet/src/examples/Makefile.in b/libraries/eet/src/examples/Makefile.in
deleted file mode 100644
index 1e979ab..0000000
--- a/libraries/eet/src/examples/Makefile.in
+++ /dev/null
@@ -1,732 +0,0 @@
-# Makefile.in generated by automake 1.11.1 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
-# Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-
-VPATH = @srcdir@
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-@BUILD_EXAMPLES_TRUE@examples_PROGRAMS = eet_basic$(EXEEXT) \
-@BUILD_EXAMPLES_TRUE@   eet_file$(EXEEXT) \
-@BUILD_EXAMPLES_TRUE@   eet_data_simple$(EXEEXT) \
-@BUILD_EXAMPLES_TRUE@   eet_data_nested$(EXEEXT) \
-@BUILD_EXAMPLES_TRUE@   eet_data_file_descriptor_01$(EXEEXT) \
-@BUILD_EXAMPLES_TRUE@   eet_data_file_descriptor_02$(EXEEXT) \
-@BUILD_EXAMPLES_TRUE@   eet_data_cipher_decipher$(EXEEXT)
-@INSTALL_EXAMPLES_TRUE@am__append_1 = \
-@INSTALL_EXAMPLES_TRUE@eet-basic.c \
-@INSTALL_EXAMPLES_TRUE@eet-file.c \
-@INSTALL_EXAMPLES_TRUE@eet-data-simple.c \
-@INSTALL_EXAMPLES_TRUE@eet-data-nested.c \
-@INSTALL_EXAMPLES_TRUE@eet-data-file_descriptor_01.c \
-@INSTALL_EXAMPLES_TRUE@eet-data-file_descriptor_02.c \
-@INSTALL_EXAMPLES_TRUE@eet-data-cipher_decipher.c
-
-subdir = src/examples
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/ac_attribute.m4 \
-        $(top_srcdir)/m4/ac_path_generic.m4 \
-        $(top_srcdir)/m4/efl_binary.m4 \
-        $(top_srcdir)/m4/efl_compiler_flag.m4 \
-        $(top_srcdir)/m4/efl_coverage.m4 \
-        $(top_srcdir)/m4/efl_doxygen.m4 \
-        $(top_srcdir)/m4/efl_fnmatch.m4 \
-        $(top_srcdir)/m4/efl_path_max.m4 $(top_srcdir)/m4/efl_tests.m4 \
-        $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
-        $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
-        $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-        $(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/config.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-am__installdirs = "$(DESTDIR)$(examplesdir)" "$(DESTDIR)$(filesdir)"
-PROGRAMS = $(examples_PROGRAMS)
-am__eet_basic_SOURCES_DIST = eet-basic.c
-@BUILD_EXAMPLES_TRUE@am_eet_basic_OBJECTS = eet-basic.$(OBJEXT)
-eet_basic_OBJECTS = $(am_eet_basic_OBJECTS)
-@BUILD_EXAMPLES_TRUE@eet_basic_DEPENDENCIES =  \
-@BUILD_EXAMPLES_TRUE@   $(top_builddir)/src/lib/libeet.la
-AM_V_lt = $(am__v_lt_$(V))
-am__v_lt_ = $(am__v_lt_$(AM_DEFAULT_VERBOSITY))
-am__v_lt_0 = --silent
-am__eet_data_cipher_decipher_SOURCES_DIST =  \
-        eet-data-cipher_decipher.c
-@BUILD_EXAMPLES_TRUE@am_eet_data_cipher_decipher_OBJECTS =  \
-@BUILD_EXAMPLES_TRUE@   eet-data-cipher_decipher.$(OBJEXT)
-eet_data_cipher_decipher_OBJECTS =  \
-        $(am_eet_data_cipher_decipher_OBJECTS)
-@BUILD_EXAMPLES_TRUE@eet_data_cipher_decipher_DEPENDENCIES =  \
-@BUILD_EXAMPLES_TRUE@   $(top_builddir)/src/lib/libeet.la
-am__eet_data_file_descriptor_01_SOURCES_DIST =  \
-        eet-data-file_descriptor_01.c
-@BUILD_EXAMPLES_TRUE@am_eet_data_file_descriptor_01_OBJECTS =  \
-@BUILD_EXAMPLES_TRUE@   eet-data-file_descriptor_01.$(OBJEXT)
-eet_data_file_descriptor_01_OBJECTS =  \
-        $(am_eet_data_file_descriptor_01_OBJECTS)
-@BUILD_EXAMPLES_TRUE@eet_data_file_descriptor_01_DEPENDENCIES =  \
-@BUILD_EXAMPLES_TRUE@   $(top_builddir)/src/lib/libeet.la
-am__eet_data_file_descriptor_02_SOURCES_DIST =  \
-        eet-data-file_descriptor_02.c
-@BUILD_EXAMPLES_TRUE@am_eet_data_file_descriptor_02_OBJECTS =  \
-@BUILD_EXAMPLES_TRUE@   eet-data-file_descriptor_02.$(OBJEXT)
-eet_data_file_descriptor_02_OBJECTS =  \
-        $(am_eet_data_file_descriptor_02_OBJECTS)
-@BUILD_EXAMPLES_TRUE@eet_data_file_descriptor_02_DEPENDENCIES =  \
-@BUILD_EXAMPLES_TRUE@   $(top_builddir)/src/lib/libeet.la
-am__eet_data_nested_SOURCES_DIST = eet-data-nested.c
-@BUILD_EXAMPLES_TRUE@am_eet_data_nested_OBJECTS =  \
-@BUILD_EXAMPLES_TRUE@   eet-data-nested.$(OBJEXT)
-eet_data_nested_OBJECTS = $(am_eet_data_nested_OBJECTS)
-@BUILD_EXAMPLES_TRUE@eet_data_nested_DEPENDENCIES =  \
-@BUILD_EXAMPLES_TRUE@   $(top_builddir)/src/lib/libeet.la
-am__eet_data_simple_SOURCES_DIST = eet-data-simple.c
-@BUILD_EXAMPLES_TRUE@am_eet_data_simple_OBJECTS =  \
-@BUILD_EXAMPLES_TRUE@   eet-data-simple.$(OBJEXT)
-eet_data_simple_OBJECTS = $(am_eet_data_simple_OBJECTS)
-@BUILD_EXAMPLES_TRUE@eet_data_simple_DEPENDENCIES =  \
-@BUILD_EXAMPLES_TRUE@   $(top_builddir)/src/lib/libeet.la
-am__eet_file_SOURCES_DIST = eet-file.c
-@BUILD_EXAMPLES_TRUE@am_eet_file_OBJECTS = eet-file.$(OBJEXT)
-eet_file_OBJECTS = $(am_eet_file_OBJECTS)
-@BUILD_EXAMPLES_TRUE@eet_file_DEPENDENCIES =  \
-@BUILD_EXAMPLES_TRUE@   $(top_builddir)/src/lib/libeet.la
-DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)
-depcomp = $(SHELL) $(top_srcdir)/depcomp
-am__depfiles_maybe = depfiles
-am__mv = mv -f
-COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
-        $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
-        $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \
-        $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
-        $(AM_CFLAGS) $(CFLAGS)
-AM_V_CC = $(am__v_CC_$(V))
-am__v_CC_ = $(am__v_CC_$(AM_DEFAULT_VERBOSITY))
-am__v_CC_0 = @echo "  CC    " $@;
-AM_V_at = $(am__v_at_$(V))
-am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
-am__v_at_0 = @
-CCLD = $(CC)
-LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
-        $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
-        $(AM_LDFLAGS) $(LDFLAGS) -o $@
-AM_V_CCLD = $(am__v_CCLD_$(V))
-am__v_CCLD_ = $(am__v_CCLD_$(AM_DEFAULT_VERBOSITY))
-am__v_CCLD_0 = @echo "  CCLD  " $@;
-AM_V_GEN = $(am__v_GEN_$(V))
-am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
-am__v_GEN_0 = @echo "  GEN   " $@;
-SOURCES = $(eet_basic_SOURCES) $(eet_data_cipher_decipher_SOURCES) \
-        $(eet_data_file_descriptor_01_SOURCES) \
-        $(eet_data_file_descriptor_02_SOURCES) \
-        $(eet_data_nested_SOURCES) $(eet_data_simple_SOURCES) \
-        $(eet_file_SOURCES)
-DIST_SOURCES = $(am__eet_basic_SOURCES_DIST) \
-        $(am__eet_data_cipher_decipher_SOURCES_DIST) \
-        $(am__eet_data_file_descriptor_01_SOURCES_DIST) \
-        $(am__eet_data_file_descriptor_02_SOURCES_DIST) \
-        $(am__eet_data_nested_SOURCES_DIST) \
-        $(am__eet_data_simple_SOURCES_DIST) \
-        $(am__eet_file_SOURCES_DIST)
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
-    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
-    *) f=$$p;; \
-  esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
-  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
-  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
-  for p in $$list; do echo "$$p $$p"; done | \
-  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
-  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
-    if (++n[$$2] == $(am__install_max)) \
-      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
-    END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
-  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
-  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-DATA = $(files_DATA)
-ETAGS = etags
-CTAGS = ctags
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-ALLOCA = @ALLOCA@
-AMTAR = @AMTAR@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AR = @AR@
-AS = @AS@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CHECK_CFLAGS = @CHECK_CFLAGS@
-CHECK_LIBS = @CHECK_LIBS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEBUG_CFLAGS = @DEBUG_CFLAGS@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DLLTOOL = @DLLTOOL@
-DSYMUTIL = @DSYMUTIL@
-DUMPBIN = @DUMPBIN@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EET_CFLAGS = @EET_CFLAGS@
-EET_CPPFLAGS = @EET_CPPFLAGS@
-EET_LIBS = @EET_LIBS@
-EET_PRG = @EET_PRG@
-EFL_COVERAGE_CFLAGS = @EFL_COVERAGE_CFLAGS@
-EFL_COVERAGE_LIBS = @EFL_COVERAGE_LIBS@
-EFL_EET_BUILD = @EFL_EET_BUILD@
-EFL_FNMATCH_LIBS = @EFL_FNMATCH_LIBS@
-EGREP = @EGREP@
-EINA_CFLAGS = @EINA_CFLAGS@
-EINA_LIBS = @EINA_LIBS@
-EVIL_CFLAGS = @EVIL_CFLAGS@
-EVIL_LIBS = @EVIL_LIBS@
-EXEEXT = @EXEEXT@
-EXOTIC_CFLAGS = @EXOTIC_CFLAGS@
-EXOTIC_LIBS = @EXOTIC_LIBS@
-FGREP = @FGREP@
-GNUTLS_CFLAGS = @GNUTLS_CFLAGS@
-GNUTLS_LIBS = @GNUTLS_LIBS@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-LD = @LD@
-LDFLAGS = @LDFLAGS@
-LIBGCRYPT_CFLAGS = @LIBGCRYPT_CFLAGS@
-LIBGCRYPT_CONFIG = @LIBGCRYPT_CONFIG@
-LIBGCRYPT_LIBS = @LIBGCRYPT_LIBS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LIPO = @LIPO@
-LN_S = @LN_S@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-MKDIR_P = @MKDIR_P@
-NM = @NM@
-NMEDIT = @NMEDIT@
-OBJDUMP = @OBJDUMP@
-OBJEXT = @OBJEXT@
-OPENSSL_CFLAGS = @OPENSSL_CFLAGS@
-OPENSSL_LIBS = @OPENSSL_LIBS@
-OTOOL = @OTOOL@
-OTOOL64 = @OTOOL64@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-PKG_CONFIG = @PKG_CONFIG@
-PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
-PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
-RANLIB = @RANLIB@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-STRIP = @STRIP@
-VERSION = @VERSION@
-VMAJ = @VMAJ@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-efl_doxygen = @efl_doxygen@
-efl_have_doxygen = @efl_have_doxygen@
-exec_prefix = @exec_prefix@
-have_lcov = @have_lcov@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-lt_ECHO = @lt_ECHO@
-lt_enable_auto_import = @lt_enable_auto_import@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-pkgconfig_requires_private = @pkgconfig_requires_private@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-release_info = @release_info@
-requirement_eet = @requirement_eet@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-version_info = @version_info@
-MAINTAINERCLEANFILES = Makefile.in
-examplesdir = $(datadir)/$(PACKAGE)/examples
-@BUILD_EXAMPLES_TRUE@AM_CPPFLAGS = \
-@BUILD_EXAMPLES_TRUE@-I. \
-@BUILD_EXAMPLES_TRUE@-I$(top_srcdir)/src/lib \
-@BUILD_EXAMPLES_TRUE@@EINA_CFLAGS@
-
-@BUILD_EXAMPLES_TRUE@eet_basic_SOURCES = eet-basic.c
-@BUILD_EXAMPLES_TRUE@eet_basic_LDADD = $(top_builddir)/src/lib/libeet.la @EINA_LIBS@
-@BUILD_EXAMPLES_TRUE@eet_file_SOURCES = eet-file.c
-@BUILD_EXAMPLES_TRUE@eet_file_LDADD = $(top_builddir)/src/lib/libeet.la @EINA_LIBS@
-@BUILD_EXAMPLES_TRUE@eet_data_simple_SOURCES = eet-data-simple.c
-@BUILD_EXAMPLES_TRUE@eet_data_simple_LDADD = $(top_builddir)/src/lib/libeet.la @EINA_LIBS@
-@BUILD_EXAMPLES_TRUE@eet_data_nested_SOURCES = eet-data-nested.c
-@BUILD_EXAMPLES_TRUE@eet_data_nested_LDADD = $(top_builddir)/src/lib/libeet.la @EINA_LIBS@
-@BUILD_EXAMPLES_TRUE@eet_data_file_descriptor_01_SOURCES = eet-data-file_descriptor_01.c
-@BUILD_EXAMPLES_TRUE@eet_data_file_descriptor_01_LDADD = $(top_builddir)/src/lib/libeet.la @EINA_LIBS@
-@BUILD_EXAMPLES_TRUE@eet_data_file_descriptor_02_SOURCES = eet-data-file_descriptor_02.c
-@BUILD_EXAMPLES_TRUE@eet_data_file_descriptor_02_LDADD = $(top_builddir)/src/lib/libeet.la @EINA_LIBS@
-@BUILD_EXAMPLES_TRUE@eet_data_cipher_decipher_SOURCES = eet-data-cipher_decipher.c
-@BUILD_EXAMPLES_TRUE@eet_data_cipher_decipher_LDADD = $(top_builddir)/src/lib/libeet.la @EINA_LIBS@
-filesdir = $(datadir)/$(PACKAGE)/examples
-files_DATA = $(am__append_1)
-all: all-am
-
-.SUFFIXES:
-.SUFFIXES: .c .lo .o .obj
-$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
-        @for dep in $?; do \
-          case '$(am__configure_deps)' in \
-            *$$dep*) \
-              ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
-                && { if test -f $@; then exit 0; else break; fi; }; \
-              exit 1;; \
-          esac; \
-        done; \
-        echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu src/examples/Makefile'; \
-        $(am__cd) $(top_srcdir) && \
-          $(AUTOMAKE) --gnu src/examples/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-        @case '$?' in \
-          *config.status*) \
-            cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
-          *) \
-            echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
-            cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
-        esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-        cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure:  $(am__configure_deps)
-        cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
-        cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-install-examplesPROGRAMS: $(examples_PROGRAMS)
-        @$(NORMAL_INSTALL)
-        test -z "$(examplesdir)" || $(MKDIR_P) "$(DESTDIR)$(examplesdir)"
-        @list='$(examples_PROGRAMS)'; test -n "$(examplesdir)" || list=; \
-        for p in $$list; do echo "$$p $$p"; done | \
-        sed 's/$(EXEEXT)$$//' | \
-        while read p p1; do if test -f $$p || test -f $$p1; \
-          then echo "$$p"; echo "$$p"; else :; fi; \
-        done | \
-        sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \
-            -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
-        sed 'N;N;N;s,\n, ,g' | \
-        $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
-          { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
-            if ($$2 == $$4) files[d] = files[d] " " $$1; \
-            else { print "f", $$3 "/" $$4, $$1; } } \
-          END { for (d in files) print "f", d, files[d] }' | \
-        while read type dir files; do \
-            if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
-            test -z "$$files" || { \
-            echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(examplesdir)$$dir'"; \
-            $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(examplesdir)$$dir" || exit $$?; \
-            } \
-        ; done
-
-uninstall-examplesPROGRAMS:
-        @$(NORMAL_UNINSTALL)
-        @list='$(examples_PROGRAMS)'; test -n "$(examplesdir)" || list=; \
-        files=`for p in $$list; do echo "$$p"; done | \
-          sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
-              -e 's/$$/$(EXEEXT)/' `; \
-        test -n "$$list" || exit 0; \
-        echo " ( cd '$(DESTDIR)$(examplesdir)' && rm -f" $$files ")"; \
-        cd "$(DESTDIR)$(examplesdir)" && rm -f $$files
-
-clean-examplesPROGRAMS:
-        @list='$(examples_PROGRAMS)'; test -n "$$list" || exit 0; \
-        echo " rm -f" $$list; \
-        rm -f $$list || exit $$?; \
-        test -n "$(EXEEXT)" || exit 0; \
-        list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
-        echo " rm -f" $$list; \
-        rm -f $$list
-eet_basic$(EXEEXT): $(eet_basic_OBJECTS) $(eet_basic_DEPENDENCIES) 
-        @rm -f eet_basic$(EXEEXT)
-        $(AM_V_CCLD)$(LINK) $(eet_basic_OBJECTS) $(eet_basic_LDADD) $(LIBS)
-eet_data_cipher_decipher$(EXEEXT): $(eet_data_cipher_decipher_OBJECTS) $(eet_data_cipher_decipher_DEPENDENCIES) 
-        @rm -f eet_data_cipher_decipher$(EXEEXT)
-        $(AM_V_CCLD)$(LINK) $(eet_data_cipher_decipher_OBJECTS) $(eet_data_cipher_decipher_LDADD) $(LIBS)
-eet_data_file_descriptor_01$(EXEEXT): $(eet_data_file_descriptor_01_OBJECTS) $(eet_data_file_descriptor_01_DEPENDENCIES) 
-        @rm -f eet_data_file_descriptor_01$(EXEEXT)
-        $(AM_V_CCLD)$(LINK) $(eet_data_file_descriptor_01_OBJECTS) $(eet_data_file_descriptor_01_LDADD) $(LIBS)
-eet_data_file_descriptor_02$(EXEEXT): $(eet_data_file_descriptor_02_OBJECTS) $(eet_data_file_descriptor_02_DEPENDENCIES) 
-        @rm -f eet_data_file_descriptor_02$(EXEEXT)
-        $(AM_V_CCLD)$(LINK) $(eet_data_file_descriptor_02_OBJECTS) $(eet_data_file_descriptor_02_LDADD) $(LIBS)
-eet_data_nested$(EXEEXT): $(eet_data_nested_OBJECTS) $(eet_data_nested_DEPENDENCIES) 
-        @rm -f eet_data_nested$(EXEEXT)
-        $(AM_V_CCLD)$(LINK) $(eet_data_nested_OBJECTS) $(eet_data_nested_LDADD) $(LIBS)
-eet_data_simple$(EXEEXT): $(eet_data_simple_OBJECTS) $(eet_data_simple_DEPENDENCIES) 
-        @rm -f eet_data_simple$(EXEEXT)
-        $(AM_V_CCLD)$(LINK) $(eet_data_simple_OBJECTS) $(eet_data_simple_LDADD) $(LIBS)
-eet_file$(EXEEXT): $(eet_file_OBJECTS) $(eet_file_DEPENDENCIES) 
-        @rm -f eet_file$(EXEEXT)
-        $(AM_V_CCLD)$(LINK) $(eet_file_OBJECTS) $(eet_file_LDADD) $(LIBS)
-
-mostlyclean-compile:
-        -rm -f *.$(OBJEXT)
-
-distclean-compile:
-        -rm -f *.tab.c
-
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eet-basic.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eet-data-cipher_decipher.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eet-data-file_descriptor_01.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eet-data-file_descriptor_02.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eet-data-nested.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eet-data-simple.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eet-file.Po@am__quote@
-
-.c.o:
-@am__fastdepCC_TRUE@    $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@    $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@am__fastdepCC_FALSE@   $(AM_V_CC) @AM_BACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@       source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@       DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@   $(COMPILE) -c $<
-
-.c.obj:
-@am__fastdepCC_TRUE@    $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@    $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@am__fastdepCC_FALSE@   $(AM_V_CC) @AM_BACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@       source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@       DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@   $(COMPILE) -c `$(CYGPATH_W) '$<'`
-
-.c.lo:
-@am__fastdepCC_TRUE@    $(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@    $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
-@am__fastdepCC_FALSE@   $(AM_V_CC) @AM_BACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@       source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@       DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@   $(LTCOMPILE) -c -o $@ $<
-
-mostlyclean-libtool:
-        -rm -f *.lo
-
-clean-libtool:
-        -rm -rf .libs _libs
-install-filesDATA: $(files_DATA)
-        @$(NORMAL_INSTALL)
-        test -z "$(filesdir)" || $(MKDIR_P) "$(DESTDIR)$(filesdir)"
-        @list='$(files_DATA)'; test -n "$(filesdir)" || list=; \
-        for p in $$list; do \
-          if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-          echo "$$d$$p"; \
-        done | $(am__base_list) | \
-        while read files; do \
-          echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(filesdir)'"; \
-          $(INSTALL_DATA) $$files "$(DESTDIR)$(filesdir)" || exit $$?; \
-        done
-
-uninstall-filesDATA:
-        @$(NORMAL_UNINSTALL)
-        @list='$(files_DATA)'; test -n "$(filesdir)" || list=; \
-        files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
-        test -n "$$files" || exit 0; \
-        echo " ( cd '$(DESTDIR)$(filesdir)' && rm -f" $$files ")"; \
-        cd "$(DESTDIR)$(filesdir)" && rm -f $$files
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
-        list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
-        unique=`for i in $$list; do \
-            if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-          done | \
-          $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-              END { if (nonempty) { for (i in files) print i; }; }'`; \
-        mkid -fID $$unique
-tags: TAGS
-
-TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
-                $(TAGS_FILES) $(LISP)
-        set x; \
-        here=`pwd`; \
-        list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
-        unique=`for i in $$list; do \
-            if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-          done | \
-          $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-              END { if (nonempty) { for (i in files) print i; }; }'`; \
-        shift; \
-        if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
-          test -n "$$unique" || unique=$$empty_fix; \
-          if test $$# -gt 0; then \
-            $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-              "$$@" $$unique; \
-          else \
-            $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-              $$unique; \
-          fi; \
-        fi
-ctags: CTAGS
-CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
-                $(TAGS_FILES) $(LISP)
-        list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
-        unique=`for i in $$list; do \
-            if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-          done | \
-          $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-              END { if (nonempty) { for (i in files) print i; }; }'`; \
-        test -z "$(CTAGS_ARGS)$$unique" \
-          || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-             $$unique
-
-GTAGS:
-        here=`$(am__cd) $(top_builddir) && pwd` \
-          && $(am__cd) $(top_srcdir) \
-          && gtags -i $(GTAGS_ARGS) "$$here"
-
-distclean-tags:
-        -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-distdir: $(DISTFILES)
-        @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-        topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-        list='$(DISTFILES)'; \
-          dist_files=`for file in $$list; do echo $$file; done | \
-          sed -e "s|^$$srcdirstrip/||;t" \
-              -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
-        case $$dist_files in \
-          */*) $(MKDIR_P) `echo "$$dist_files" | \
-                           sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
-                           sort -u` ;; \
-        esac; \
-        for file in $$dist_files; do \
-          if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-          if test -d $$d/$$file; then \
-            dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
-            if test -d "$(distdir)/$$file"; then \
-              find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-            fi; \
-            if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-              cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
-              find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-            fi; \
-            cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
-          else \
-            test -f "$(distdir)/$$file" \
-            || cp -p $$d/$$file "$(distdir)/$$file" \
-            || exit 1; \
-          fi; \
-        done
-check-am: all-am
-check: check-am
-all-am: Makefile $(PROGRAMS) $(DATA)
-installdirs:
-        for dir in "$(DESTDIR)$(examplesdir)" "$(DESTDIR)$(filesdir)"; do \
-          test -z "$$dir" || $(MKDIR_P) "$$dir"; \
-        done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
-        @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
-        $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-          install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-          `test -z '$(STRIP)' || \
-            echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-        -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-        -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
-        @echo "This command is intended for maintainers to use"
-        @echo "it deletes files that may require special tools to rebuild."
-        -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
-clean: clean-am
-
-clean-am: clean-examplesPROGRAMS clean-generic clean-libtool \
-        mostlyclean-am
-
-distclean: distclean-am
-        -rm -rf ./$(DEPDIR)
-        -rm -f Makefile
-distclean-am: clean-am distclean-compile distclean-generic \
-        distclean-tags
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am: install-examplesPROGRAMS install-filesDATA
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am:
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man:
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
-        -rm -rf ./$(DEPDIR)
-        -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-compile mostlyclean-generic \
-        mostlyclean-libtool
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-examplesPROGRAMS uninstall-filesDATA
-
-.MAKE: install-am install-strip
-
-.PHONY: CTAGS GTAGS all all-am check check-am clean \
-        clean-examplesPROGRAMS clean-generic clean-libtool ctags \
-        distclean distclean-compile distclean-generic \
-        distclean-libtool distclean-tags distdir dvi dvi-am html \
-        html-am info info-am install install-am install-data \
-        install-data-am install-dvi install-dvi-am \
-        install-examplesPROGRAMS install-exec install-exec-am \
-        install-filesDATA install-html install-html-am install-info \
-        install-info-am install-man install-pdf install-pdf-am \
-        install-ps install-ps-am install-strip installcheck \
-        installcheck-am installdirs maintainer-clean \
-        maintainer-clean-generic mostlyclean mostlyclean-compile \
-        mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
-        tags uninstall uninstall-am uninstall-examplesPROGRAMS \
-        uninstall-filesDATA
-
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/libraries/eet/src/examples/eet-basic.c b/libraries/eet/src/examples/eet-basic.c
deleted file mode 100644
index 05ff397..0000000
--- a/libraries/eet/src/examples/eet-basic.c
+++ /dev/null
@@ -1,40 +0,0 @@
-#include <Eet.h>
-
-int
-main(void)
-{
-   Eet_File *ef;
-   char *ret;
-   int size;
-   char *entries[] =
-   {
-      "Entry 1",
-      "Big text string here compared to others",
-      "Eet is cool"
-   };
-
-   eet_init();
-
-   // blindly open an file for output and write strings with their NUL char
-   ef = eet_open("test.eet", EET_FILE_MODE_WRITE);
-   eet_write(ef, "Entry 1", entries[0], strlen(entries[0]) + 1, 0);
-   eet_write(ef, "Entry 2", entries[1], strlen(entries[1]) + 1, 1);
-   eet_write(ef, "Entry 3", entries[2], strlen(entries[2]) + 1, 0);
-   eet_close(ef);
-
-   // open the file again and blindly get the entries we wrote
-   ef = eet_open("test.eet", EET_FILE_MODE_READ);
-   ret = eet_read(ef, "Entry 1", &size);
-   printf("%s\n", ret);
-   free(ret);
-   ret = eet_read(ef, "Entry 2", &size);
-   printf("%s\n", ret);
-   free(ret);
-   ret = eet_read(ef, "Entry 3", &size);
-   printf("%s\n", ret);
-   free(ret);
-   eet_close(ef);
-
-   eet_shutdown();
-}
-
diff --git a/libraries/eet/src/examples/eet-data-cipher_decipher.c b/libraries/eet/src/examples/eet-data-cipher_decipher.c
deleted file mode 100644
index 2ef965c..0000000
--- a/libraries/eet/src/examples/eet-data-cipher_decipher.c
+++ /dev/null
@@ -1,119 +0,0 @@
-/*
- * build: gcc -o eet_data_file_cipher_decipher eet-data-file_cipher_decipher.c `pkg-config --cflags --libs eet eina`
- */
-
-#include <Eina.h>
-#include <Eet.h>
-#include <stdio.h>
-#include <limits.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <unistd.h>
-
-int
-main(void)
-{
-   const char *buffer = "Here is a string of data to save !";
-   const char *key = "This is a crypto key";
-   const char *key_bad = "This is another crypto key";
-
-   char *file = strdup("/tmp/eet_cipher_example_XXXXX");
-   Eet_File *ef;
-   char *test;
-   int size;
-
-   eet_init();
-
-   if (!(file = tmpnam(file)))
-     {
-        fprintf(
-          stderr, "ERROR: could not create temporary file (%s).\n", file);
-        goto panic;
-     }
-
-   /* Crypt an eet file. */
-   ef = eet_open(file, EET_FILE_MODE_WRITE);
-   if (!ef)
-     {
-        fprintf(
-          stderr, "ERROR: could not access file (%s).\n", file);
-        goto error;
-     }
-
-   if (!eet_write_cipher(ef, "keys/tests", buffer, strlen(buffer) + 1, 0, key))
-     {
-        fprintf(
-          stderr, "ERROR: could not access file (%s).\n", file);
-        goto error;
-     }
-
-   eet_close(ef);
-
-   /* Decrypt an eet file. */
-   ef = eet_open(file, EET_FILE_MODE_READ);
-   if (!ef)
-     {
-        fprintf(
-          stderr, "ERROR: could not access file (%s).\n", file);
-        goto error;
-     }
-
-   test = eet_read_cipher(ef, "keys/tests", &size, key);
-   if (!test)
-     {
-        fprintf(
-          stderr, "ERROR: could decript contents on file %s, with key %s.\n",
-          file, key);
-        goto error;
-     }
-
-   if (size != (int)strlen(buffer) + 1)
-     {
-        fprintf(
-          stderr, "ERROR: something is wrong with the decripted data\n");
-        goto error;
-     }
-
-   if (memcmp(test, buffer, strlen(buffer) + 1) != 0)
-     {
-        fprintf(
-          stderr, "ERROR: something is wrong with the decripted data\n");
-        goto error;
-     }
-
-   eet_close(ef);
-
-   /* Decrypt an eet file, now using our BAD key!! */
-   ef = eet_open(file, EET_FILE_MODE_READ);
-   if (!ef)
-     {
-        fprintf(
-          stderr, "ERROR: could not access file (%s).\n", file);
-        goto error;
-     }
-
-   test = eet_read_cipher(ef, "keys/tests", &size, key_bad);
-
-   if (size == (int)strlen(buffer) + 1)
-     if (memcmp(test, buffer, strlen(buffer) + 1) == 0)
-       {
-          fprintf(
-            stderr, "ERROR: something is wrong with the contents of %s, as"
-                    " we accessed it with a different key and it decripted our"
-                    " information right.\n", file);
-          goto error;
-       }
-
-   eet_close(ef);
-
-error:
-   if (unlink(file) != 0)
-     {
-        fprintf(
-          stderr, "ERROR: could not unlink file (%s).\n", file);
-     }
-
-panic:
-   eet_shutdown();
-}
-
diff --git a/libraries/eet/src/examples/eet-data-file_descriptor_01.c b/libraries/eet/src/examples/eet-data-file_descriptor_01.c
deleted file mode 100644
index 4b5b75f..0000000
--- a/libraries/eet/src/examples/eet-data-file_descriptor_01.c
+++ /dev/null
@@ -1,529 +0,0 @@
-/*
- * build: gcc -o eet_data_file_descriptor eet-data-file_descriptor.c `pkg-config --cflags --libs eet eina`
- */
-#include <Eina.h>
-#include <Eet.h>
-#include <stdio.h>
-#include <limits.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <unistd.h>
-
-// complex real-world structures based on elmdentica database
-typedef struct
-{
-   const char  *screen_name;
-   const char  *name;
-   const char  *message;
-   unsigned int id;
-   unsigned int status_id;
-   unsigned int date;
-   unsigned int timeline;
-} My_Message;
-
-typedef struct
-{
-   const char *dm_to;
-   const char *message;
-} My_Post;
-
-typedef struct
-{
-   unsigned int id;
-   const char  *name;
-   Eina_List   *messages;
-   My_Post     *posts;
-   int          posts_count;
-} My_Account;
-
-typedef struct
-{
-   unsigned int version; // it is recommended to use versioned configuration!
-   Eina_Hash   *accounts;
-} My_Cache;
-
-// string that represents the entry in eet file, you might like to have
-// different profiles or so in the same file, this is possible with
-// different strings
-static const char MY_CACHE_FILE_ENTRY[] = "cache";
-
-// keep the descriptor static global, so it can be
-// shared by different functions (load/save) of this and only this
-// file.
-static Eet_Data_Descriptor *_my_cache_descriptor;
-static Eet_Data_Descriptor *_my_account_descriptor;
-static Eet_Data_Descriptor *_my_message_descriptor;
-static Eet_Data_Descriptor *_my_post_descriptor;
-
-// keep file handle alive, so mmap()ed strings are all alive as well
-static Eet_File *_my_cache_file = NULL;
-static Eet_Dictionary *_my_cache_dict = NULL;
-
-static void
-_my_cache_descriptor_init(void)
-{
-   Eet_Data_Descriptor_Class eddc;
-
-   // The FILE variant is good for caches and things that are just
-   // appended, but needs to take care when changing strings and files must
-   // be kept open so mmap()ed strings will be kept alive.
-   EET_EINA_FILE_DATA_DESCRIPTOR_CLASS_SET(&eddc, My_Cache);
-   _my_cache_descriptor = eet_data_descriptor_file_new(&eddc);
-
-   EET_EINA_FILE_DATA_DESCRIPTOR_CLASS_SET(&eddc, My_Account);
-   _my_account_descriptor = eet_data_descriptor_file_new(&eddc);
-
-   EET_EINA_FILE_DATA_DESCRIPTOR_CLASS_SET(&eddc, My_Message);
-   _my_message_descriptor = eet_data_descriptor_file_new(&eddc);
-
-   EET_EINA_FILE_DATA_DESCRIPTOR_CLASS_SET(&eddc, My_Post);
-   _my_post_descriptor = eet_data_descriptor_file_new(&eddc);
-
-   // Describe the members to be saved:
-   // Use a temporary macro so we don't type a lot, also avoid errors:
-
-#define ADD_BASIC(member, eet_type) \
-  EET_DATA_DESCRIPTOR_ADD_BASIC     \
-    (_my_message_descriptor, My_Message, # member, member, eet_type)
-   ADD_BASIC(screen_name, EET_T_STRING);
-   ADD_BASIC(name, EET_T_STRING);
-   ADD_BASIC(message, EET_T_STRING);
-   ADD_BASIC(id, EET_T_UINT);
-   ADD_BASIC(status_id, EET_T_UINT);
-   ADD_BASIC(date, EET_T_UINT);
-   ADD_BASIC(timeline, EET_T_UINT);
-#undef ADD_BASIC
-
-#define ADD_BASIC(member, eet_type) \
-  EET_DATA_DESCRIPTOR_ADD_BASIC     \
-    (_my_post_descriptor, My_Post, # member, member, eet_type)
-   ADD_BASIC(dm_to, EET_T_STRING);
-   ADD_BASIC(message, EET_T_STRING);
-#undef ADD_BASIC
-
-#define ADD_BASIC(member, eet_type) \
-  EET_DATA_DESCRIPTOR_ADD_BASIC     \
-    (_my_account_descriptor, My_Account, # member, member, eet_type)
-   ADD_BASIC(name, EET_T_STRING);
-   ADD_BASIC(id, EET_T_UINT);
-#undef ADD_BASIC
-
-   EET_DATA_DESCRIPTOR_ADD_LIST
-     (_my_account_descriptor, My_Account, "messages", messages,
-     _my_message_descriptor);
-   EET_DATA_DESCRIPTOR_ADD_VAR_ARRAY
-     (_my_account_descriptor, My_Account, "posts", posts,
-     _my_post_descriptor);
-
-#define ADD_BASIC(member, eet_type) \
-  EET_DATA_DESCRIPTOR_ADD_BASIC     \
-    (_my_cache_descriptor, My_Cache, # member, member, eet_type)
-   ADD_BASIC(version, EET_T_UINT);
-#undef ADD_BASIC
-
-   EET_DATA_DESCRIPTOR_ADD_HASH
-     (_my_cache_descriptor, My_Cache, "accounts", accounts,
-     _my_account_descriptor);
-} /* _my_cache_descriptor_init */
-
-static void
-_my_cache_descriptor_shutdown(void)
-{
-   eet_data_descriptor_free(_my_cache_descriptor);
-   eet_data_descriptor_free(_my_account_descriptor);
-   eet_data_descriptor_free(_my_message_descriptor);
-   eet_data_descriptor_free(_my_post_descriptor);
-} /* _my_cache_descriptor_shutdown */
-
-// need to check if the pointer came from mmaped area in eet_dictionary
-// or it was allocated with eina_stringshare_add()
-static void
-_eet_string_free(const char *str)
-{
-   if (!str)
-     return;
-
-   if ((_my_cache_dict) && (eet_dictionary_string_check(_my_cache_dict, str)))
-     return;
-
-   eina_stringshare_del(str);
-} /* _eet_string_free */
-
-static My_Message *
-_my_message_new(const char *message)
-{
-   My_Message *msg = calloc(1, sizeof(My_Message));
-   if (!msg)
-     {
-        fprintf(stderr, "ERROR: could not calloc My_Message\n");
-        return NULL;
-     }
-
-   msg->message = eina_stringshare_add(message);
-   return msg;
-} /* _my_message_new */
-
-static void
-_my_message_free(My_Message *msg)
-{
-   _eet_string_free(msg->screen_name);
-   _eet_string_free(msg->name);
-   _eet_string_free(msg->message);
-   free(msg);
-} /* _my_message_free */
-
-static Eina_Bool
-_my_post_add(My_Account *acc,
-             const char *message)
-{
-   int new_count = acc->posts_count + 1;
-   My_Post *post = realloc(acc->posts, new_count * sizeof(My_Post));
-   if (!post)
-     {
-        fprintf(stderr, "ERROR: could add My_Post\n");
-        return EINA_FALSE;
-     }
-
-   post[acc->posts_count].message = eina_stringshare_add(message);
-   post[acc->posts_count].dm_to = NULL;
-   acc->posts_count = new_count;
-   acc->posts = post;
-   return EINA_TRUE;
-} /* _my_post_new */
-
-static void
-_my_post_free(My_Post *post)
-{
-   _eet_string_free(post->dm_to);
-   _eet_string_free(post->message);
-} /* _my_post_free */
-
-static My_Account *
-_my_account_new(const char *name)
-{
-   My_Account *acc = calloc(1, sizeof(My_Account));
-   if (!acc)
-     {
-        fprintf(stderr, "ERROR: could not calloc My_Account\n");
-        return NULL;
-     }
-
-   acc->name = eina_stringshare_add(name);
-   return acc;
-} /* _my_account_new */
-
-static void
-_my_account_free(My_Account *acc)
-{
-   My_Message *m;
-   int i;
-
-   _eet_string_free(acc->name);
-
-   EINA_LIST_FREE(acc->messages, m)
-     _my_message_free(m);
-
-   for (i = 0; i < acc->posts_count; i++)
-     _my_post_free(&acc->posts[i]);
-   free(acc->posts);
-
-   free(acc);
-} /* _my_account_free */
-
-static My_Cache *
-_my_cache_new(void)
-{
-   My_Cache *my_cache = calloc(1, sizeof(My_Cache));
-   if (!my_cache)
-     {
-        fprintf(stderr, "ERROR: could not calloc My_Cache\n");
-        return NULL;
-     }
-
-   my_cache->accounts = eina_hash_string_small_new(NULL);
-
-   my_cache->version = 1;
-   return my_cache;
-} /* _my_cache_new */
-
-static Eina_Bool
-_my_cache_account_free_cb(const Eina_Hash *hash,
-                          const void      *key,
-                          void            *data,
-                          void            *fdata)
-{
-   _my_account_free(data);
-   return EINA_TRUE;
-}
-
-static void
-_my_cache_free(My_Cache *my_cache)
-{
-   My_Account *acc;
-   eina_hash_foreach(my_cache->accounts, _my_cache_account_free_cb, NULL);
-   eina_hash_free(my_cache->accounts);
-   free(my_cache);
-} /* _my_cache_free */
-
-static My_Account *
-_my_cache_account_find(My_Cache   *my_cache,
-                       const char *name)
-{
-   return eina_hash_find(my_cache->accounts, name);
-} /* _my_cache_account_find */
-
-static My_Cache *
-_my_cache_load(const char *filename)
-{
-   My_Cache *my_cache;
-   Eet_File *ef = eet_open(filename, EET_FILE_MODE_READ);
-   if (!ef)
-     {
-        fprintf(stderr, "ERROR: could not open '%s' for read\n", filename);
-        return NULL;
-     }
-
-   my_cache = eet_data_read(ef, _my_cache_descriptor, MY_CACHE_FILE_ENTRY);
-   if (!my_cache)
-     {
-        eet_close(ef);
-        return NULL;
-     }
-
-   if (my_cache->version < 1)
-     {
-        fprintf(stderr,
-                "WARNING: version %#x was too old, upgrading it to %#x\n",
-                my_cache->version, 1);
-
-        my_cache->version = 1;
-     }
-
-   if (_my_cache_file)
-     eet_close(_my_cache_file);
-
-   _my_cache_file = ef;
-   _my_cache_dict = eet_dictionary_get(ef);
-
-   return my_cache;
-} /* _my_cache_load */
-
-static Eina_Bool
-_my_cache_save(const My_Cache *my_cache,
-               const char     *filename)
-{
-   char tmp[PATH_MAX];
-   Eet_File *ef;
-   Eina_Bool ret;
-   unsigned int i, len;
-   struct stat st;
-
-   len = eina_strlcpy(tmp, filename, sizeof(tmp));
-   if (len + 12 >= (int)sizeof(tmp))
-     {
-        fprintf(stderr, "ERROR: file name is too big: %s\n", filename);
-        return EINA_FALSE;
-     }
-
-   i = 0;
-   do
-     {
-        snprintf(tmp + len, 12, ".%u", i);
-        i++;
-     }
-   while (stat(tmp, &st) == 0);
-
-   ef = eet_open(tmp, EET_FILE_MODE_WRITE);
-   if (!ef)
-     {
-        fprintf(stderr, "ERROR: could not open '%s' for write\n", tmp);
-        return EINA_FALSE;
-     }
-
-   ret = eet_data_write
-       (ef, _my_cache_descriptor, MY_CACHE_FILE_ENTRY, my_cache, EINA_TRUE);
-
-   // VERY IMPORTANT NOTE:
-   // after eet_close(), all strings mmaped from file will be GONE, invalid!
-   // you'll need to free the old cache and open the new one.
-   // For cache this is okay, as you should be saving not so often or just
-   // at end.
-   //
-   // This is a trade off, you save memory by using mmap()ed strings, but
-   // you have to care about this.
-   eet_close(ef);
-
-   if (ret)
-     {
-        unlink(filename);
-        rename(tmp, filename);
-     }
-
-   return ret;
-} /* _my_cache_save */
-
-int
-main(int   argc,
-     char *argv[])
-{
-   My_Cache *my_cache;
-   const Eina_List *l_acc;
-   Eina_Iterator *it;
-   My_Account *acc;
-   int ret = 0;
-
-   if (argc < 3)
-     {
-        fprintf(stderr,
-                "Usage:\n\t%s <input> <output> [action] [action-params]\n\n"
-                "Where actions and their parameters:\n"
-                "\tacc <name>\n"
-                "\tpost <account-name> <message>\n"
-                "\tmessage <account-name> <message>\n"
-                "\n",
-                argv[0]);
-        return -1;
-     }
-
-   eina_init();
-   eet_init();
-   _my_cache_descriptor_init();
-
-   my_cache = _my_cache_load(argv[1]);
-   if (!my_cache)
-     {
-        printf("creating new cache.\n");
-        my_cache = _my_cache_new();
-        if (!my_cache)
-          {
-             ret = -2;
-             goto end;
-          }
-     }
-
-   if (argc > 3)
-     {
-        if (strcmp(argv[3], "acc") == 0)
-          {
-             if (argc == 5)
-               {
-                  My_Account *acc = _my_cache_account_find(my_cache, argv[4]);
-                  if (!acc)
-                    {
-                       acc = _my_account_new(argv[4]);
-                       eina_hash_direct_add(my_cache->accounts, acc->name, acc);
-                    }
-                  else
-                    fprintf(stderr, "ERROR: account '%s' already exists.\n",
-                            argv[4]);
-               }
-             else
-               fprintf(stderr,
-                       "ERROR: wrong number of parameters (%d).\n",
-                       argc);
-          }
-        else if (strcmp(argv[3], "post") == 0)
-          {
-             if (argc == 6)
-               {
-                  My_Account *acc = _my_cache_account_find(my_cache, argv[4]);
-                  if (acc)
-                    {
-                       _my_post_add(acc, argv[5]);
-                    }
-                  else
-                    fprintf(stderr, "ERROR: unknown account: '%s'\n", argv[4]);
-               }
-             else
-               fprintf(stderr,
-                       "ERROR: wrong number of parameters (%d).\n",
-                       argc);
-          }
-        else if (strcmp(argv[3], "message") == 0)
-          {
-             if (argc == 6)
-               {
-                  My_Account *acc = _my_cache_account_find(my_cache, argv[4]);
-                  if (acc)
-                    {
-                       My_Message *msg = _my_message_new(argv[5]);
-                       acc->messages = eina_list_append(acc->messages, msg);
-                    }
-                  else
-                    fprintf(stderr, "ERROR: unknown account: '%s'\n", argv[4]);
-               }
-             else
-               fprintf(stderr,
-                       "ERROR: wrong number of parameters (%d).\n",
-                       argc);
-          }
-        else
-          fprintf(stderr, "ERROR: unknown action '%s'\n", argv[2]);
-     }
-
-   printf("My_Cache:\n"
-          "\tversion.: %#x\n"
-          "\taccounts: %u\n",
-          my_cache->version,
-          eina_hash_population(my_cache->accounts));
-   it = eina_hash_iterator_data_new(my_cache->accounts);
-   EINA_ITERATOR_FOREACH(it, acc)
-     {
-        const My_Post *post;
-
-        printf("\t  > %-#8x '%.20s' stats: m=%u, p=%u\n",
-               acc->id, acc->name ? acc->name : "",
-               eina_list_count(acc->messages),
-               acc->posts_count);
-
-        if (eina_list_count(acc->messages))
-          {
-             const Eina_List *l;
-             const My_Message *msg;
-             printf("\t  |messages:\n");
-
-             EINA_LIST_FOREACH(acc->messages, l, msg)
-               {
-                  printf("\t  |   %-8x '%s' [%s]: '%.20s'\n",
-                         msg->id,
-                         msg->name ? msg->name : "",
-                         msg->screen_name ? msg->screen_name : "",
-                         msg->message ? msg->message : "");
-               }
-          }
-
-        if (acc->posts_count)
-          {
-             const My_Post *post;
-             int i;
-             printf("\t  |posts:\n");
-
-             for (i = 0; i < acc->posts_count; i++)
-               {
-                  post = &acc->posts[i];
-                  if (post->dm_to)
-                    printf("\t  |  @%s: '%.20s'\n", post->dm_to, post->message);
-                  else
-                    printf("\t  |  '%.20s'\n", post->message);
-               }
-          }
-
-        printf("\n");
-     }
-   eina_iterator_free(it);
-
-   if (!_my_cache_save(my_cache, argv[2]))
-     ret = -3;
-
-   _my_cache_free(my_cache);
-
-end:
-   if (_my_cache_file)
-     eet_close(_my_cache_file);
-   _my_cache_descriptor_shutdown();
-   eet_shutdown();
-   eina_shutdown();
-
-   return ret;
-} /* main */
-
diff --git a/libraries/eet/src/examples/eet-data-file_descriptor_02.c b/libraries/eet/src/examples/eet-data-file_descriptor_02.c
deleted file mode 100644
index 65ba79e..0000000
--- a/libraries/eet/src/examples/eet-data-file_descriptor_02.c
+++ /dev/null
@@ -1,944 +0,0 @@
-/*
- * build: gcc -o eet_data_file_descriptor_02 eet-data-file_descriptor_02.c `pkg-config --cflags --libs eet eina`
- */
-
-#include <Eina.h>
-#include <Eet.h>
-#include <stdio.h>
-#include <limits.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <unistd.h>
-
-typedef enum _Example_Data_Type      Example_Data_Type;
-typedef struct _Example_Variant_Type Example_Variant_Type;
-typedef struct _Example_Variant      Example_Variant;
-typedef struct _Example_Union        Example_Union;
-typedef struct _Example_Struct1      Example_Struct1;
-typedef struct _Example_Struct2      Example_Struct2;
-typedef struct _Example_Struct3      Example_Struct3;
-typedef struct _Example_Lists        Example_Lists;
-
-enum _Example_Data_Type
-{
-   EET_UNKNOWN = 0,
-   EET_STRUCT1,
-   EET_STRUCT2,
-   EET_STRUCT3
-};
-
-struct
-{
-   Example_Data_Type u;
-   const char       *name;
-} eet_mapping[] = {
-   { EET_STRUCT1, "ST1" },
-   { EET_STRUCT2, "ST2" },
-   { EET_STRUCT3, "ST3" },
-   { EET_UNKNOWN, NULL }
-};
-
-struct _Example_Struct1
-{
-   double      val1;
-   int         stuff;
-   const char *s1;
-};
-
-struct _Example_Struct2
-{
-   Eina_Bool          b1;
-   unsigned long long v1;
-};
-
-struct _Example_Struct3
-{
-   int body;
-};
-
-struct _Example_Union
-{
-   Example_Data_Type type;
-
-   union {
-      Example_Struct1 st1;
-      Example_Struct2 st2;
-      Example_Struct3 st3;
-   } u;
-};
-
-struct _Example_Variant_Type
-{
-   const char *type;
-   Eina_Bool   unknow : 1;
-};
-
-struct _Example_Variant
-{
-   Example_Variant_Type t;
-
-   void                *data; /* differently than the union type, we
-                               * don't need to pre-allocate the memory
-                               * for the field*/
-};
-
-struct _Example_Lists
-{
-   Eina_List *union_list;
-   Eina_List *variant_list;
-};
-
-static void
-_st1_set(Example_Struct1 *st1,
-         double           v1,
-         int              v2,
-         const char      *v3)
-{
-   st1->val1 = v1;
-   st1->stuff = v2;
-   st1->s1 = v3;
-} /* _st1_set */
-
-static void
-_st2_set(Example_Struct2   *st2,
-         Eina_Bool          v1,
-         unsigned long long v2)
-{
-   st2->b1 = v1;
-   st2->v1 = v2;
-} /* _st2_set */
-
-static void
-_st3_set(Example_Struct3 *st3,
-         int              v1)
-{
-   st3->body = v1;
-} /* _st3_set */
-
-static const char *
-/* union
-   type_get() */
-_union_type_get(const void *data,
-                Eina_Bool  *unknow)
-{
-   const Example_Data_Type *u = data;
-   int i;
-
-   if (unknow)
-     *unknow = EINA_FALSE;
-
-   for (i = 0; eet_mapping[i].name != NULL; ++i)
-     if (*u == eet_mapping[i].u)
-       return eet_mapping[i].name;
-
-   if (unknow)
-     *unknow = EINA_TRUE;
-
-   return NULL;
-} /* _union_type_get */
-
-static Eina_Bool
-_union_type_set(const char *type,
-                void       *data,
-                Eina_Bool   unknow)
-{
-   Example_Data_Type *u = data;
-   int i;
-
-   if (unknow)
-     return EINA_FALSE;
-
-   for (i = 0; eet_mapping[i].name != NULL; ++i)
-     if (strcmp(eet_mapping[i].name, type) == 0)
-       {
-          *u = eet_mapping[i].u;
-          return EINA_TRUE;
-       }
-
-   return EINA_FALSE;
-} /* _union_type_set */
-
-static const char *
-_variant_type_get(const void *data,
-                  Eina_Bool  *unknow)
-{
-   const Example_Variant_Type *type = data;
-   int i;
-
-   if (unknow)
-     *unknow = type->unknow;
-
-   for (i = 0; eet_mapping[i].name != NULL; ++i)
-     if (strcmp(type->type, eet_mapping[i].name) == 0)
-       return eet_mapping[i].name;
-
-   if (unknow)
-     *unknow = EINA_FALSE;
-
-   return type->type;
-} /* _variant_type_get */
-
-static Eina_Bool
-_variant_type_set(const char *type,
-                  void       *data,
-                  Eina_Bool   unknow)
-{
-   Example_Variant_Type *vt = data;
-
-   vt->type = type;
-   vt->unknow = unknow;
-   return EINA_TRUE;
-} /* _variant_type_set */
-
-static Eet_Data_Descriptor *
-_st1_dd(void)
-{
-   Eet_Data_Descriptor_Class eddc;
-   Eet_Data_Descriptor *res;
-
-   EET_EINA_FILE_DATA_DESCRIPTOR_CLASS_SET(&eddc, Example_Struct1);
-   res = eet_data_descriptor_file_new(&eddc);
-   EET_DATA_DESCRIPTOR_ADD_BASIC(
-     res, Example_Struct1, "val1", val1, EET_T_DOUBLE);
-   EET_DATA_DESCRIPTOR_ADD_BASIC(
-     res, Example_Struct1, "stuff", stuff, EET_T_INT);
-   EET_DATA_DESCRIPTOR_ADD_BASIC(
-     res, Example_Struct1, "s1", s1, EET_T_STRING);
-
-   return res;
-} /* _st1_dd */
-
-static Eet_Data_Descriptor *
-_st2_dd(void)
-{
-   Eet_Data_Descriptor_Class eddc;
-   Eet_Data_Descriptor *res;
-
-   EET_EINA_FILE_DATA_DESCRIPTOR_CLASS_SET(&eddc, Example_Struct2);
-   res = eet_data_descriptor_file_new(&eddc);
-   EET_DATA_DESCRIPTOR_ADD_BASIC(
-     res, Example_Struct2, "b1", b1, EET_T_UCHAR);
-   EET_DATA_DESCRIPTOR_ADD_BASIC(
-     res, Example_Struct2, "v1", v1, EET_T_ULONG_LONG);
-
-   return res;
-} /* _st2_dd */
-
-static Eet_Data_Descriptor *
-_st3_dd(void)
-{
-   Eet_Data_Descriptor_Class eddc;
-   Eet_Data_Descriptor *res;
-
-   EET_EINA_FILE_DATA_DESCRIPTOR_CLASS_SET(&eddc, Example_Struct3);
-   res = eet_data_descriptor_file_new(&eddc);
-   EET_DATA_DESCRIPTOR_ADD_BASIC(
-     res, Example_Struct3, "body", body, EET_T_INT);
-
-   return res;
-} /* _st3_dd */
-
-/* string that represents the entry in the eet file. you might like to
- * have different profiles or so in the same file, this is possible
- * with different strings
- */
-static const char CACHE_FILE_ENTRY[] = "cache";
-
-/* keep the descriptor static global, so it can be shared by different
- * functions (load/save) of this and only this file.
- */
-static Eet_Data_Descriptor *_lists_descriptor;
-static Eet_Data_Descriptor *_struct_1_descriptor;
-static Eet_Data_Descriptor *_struct_2_descriptor;
-static Eet_Data_Descriptor *_struct_3_descriptor;
-static Eet_Data_Descriptor *_union_descriptor;
-static Eet_Data_Descriptor *_variant_descriptor;
-static Eet_Data_Descriptor *_union_unified_descriptor;
-static Eet_Data_Descriptor *_variant_unified_descriptor;
-
-/* keep file handle alive, so mmap()ed strings are all alive as
- * well */
-static Eet_File *_cache_file = NULL;
-static Eet_Dictionary *_cache_dict = NULL;
-
-static void
-/* declaring types */
-_data_descriptors_init(void)
-{
-   Eet_Data_Descriptor_Class eddc;
-
-   EET_EINA_FILE_DATA_DESCRIPTOR_CLASS_SET(&eddc, Example_Lists);
-   _lists_descriptor = eet_data_descriptor_file_new(&eddc);
-
-   _struct_1_descriptor = _st1_dd();
-   _struct_2_descriptor = _st2_dd();
-   _struct_3_descriptor = _st3_dd();
-
-   /* for union */
-   EET_EINA_FILE_DATA_DESCRIPTOR_CLASS_SET(&eddc, Example_Union);
-   _union_descriptor = eet_data_descriptor_file_new(&eddc);
-
-   eddc.version = EET_DATA_DESCRIPTOR_CLASS_VERSION;
-   eddc.func.type_get = _union_type_get;
-   eddc.func.type_set = _union_type_set;
-   _union_unified_descriptor = eet_data_descriptor_file_new(&eddc);
-
-   EET_DATA_DESCRIPTOR_ADD_MAPPING(
-     _union_unified_descriptor, "ST1", _struct_1_descriptor);
-   EET_DATA_DESCRIPTOR_ADD_MAPPING(
-     _union_unified_descriptor, "ST2", _struct_2_descriptor);
-   EET_DATA_DESCRIPTOR_ADD_MAPPING(
-     _union_unified_descriptor, "ST3", _struct_3_descriptor);
-
-   EET_DATA_DESCRIPTOR_ADD_UNION(
-     _union_descriptor, Example_Union, "u", u, type,
-     _union_unified_descriptor);
-
-   EET_DATA_DESCRIPTOR_ADD_LIST(
-     _lists_descriptor, Example_Lists, "union_list", union_list,
-     _union_descriptor);
-
-   /* for variant */
-   EET_EINA_FILE_DATA_DESCRIPTOR_CLASS_SET(&eddc, Example_Variant);
-   _variant_descriptor = eet_data_descriptor_file_new(&eddc);
-
-   eddc.version = EET_DATA_DESCRIPTOR_CLASS_VERSION;
-   eddc.func.type_get = _variant_type_get;
-   eddc.func.type_set = _variant_type_set;
-   _variant_unified_descriptor = eet_data_descriptor_stream_new(&eddc);
-
-   EET_DATA_DESCRIPTOR_ADD_MAPPING(
-     _variant_unified_descriptor, "ST1", _struct_1_descriptor);
-   EET_DATA_DESCRIPTOR_ADD_MAPPING(
-     _variant_unified_descriptor, "ST2", _struct_2_descriptor);
-   EET_DATA_DESCRIPTOR_ADD_MAPPING(
-     _variant_unified_descriptor, "ST3", _struct_3_descriptor);
-
-   EET_DATA_DESCRIPTOR_ADD_VARIANT(
-     _variant_descriptor, Example_Variant, "data", data, t,
-     _variant_unified_descriptor);
-
-   EET_DATA_DESCRIPTOR_ADD_LIST(
-     _lists_descriptor, Example_Lists, "variant_list", variant_list,
-     _variant_descriptor);
-} /* _data_descriptors_init */
-
-static void
-_data_descriptors_shutdown(void)
-{
-   eet_data_descriptor_free(_lists_descriptor);
-   eet_data_descriptor_free(_struct_1_descriptor);
-   eet_data_descriptor_free(_struct_2_descriptor);
-   eet_data_descriptor_free(_struct_3_descriptor);
-   eet_data_descriptor_free(_union_descriptor);
-   eet_data_descriptor_free(_variant_descriptor);
-   eet_data_descriptor_free(_union_unified_descriptor);
-   eet_data_descriptor_free(_variant_unified_descriptor);
-} /* _data_descriptors_shutdown */
-
-/* need to check if the pointer came from mmap()ed area in
- * eet_dictionary or it was allocated with eina_stringshare_add()
- */
-static void
-_string_free(const char *str)
-{
-   if (!str)
-     return;
-
-   if ((_cache_dict) && (eet_dictionary_string_check(_cache_dict, str)))
-     return;
-
-   eina_stringshare_del(str);
-} /* _string_free */
-
-static Example_Union *
-_union_1_new(const char *v1,
-             const char *v2,
-             const char *v3)
-{
-   Example_Union *un = calloc(1, sizeof(Example_Union));
-   if (!un)
-     {
-        fprintf(
-          stderr, "ERROR: could not allocate an Example_Union struct.\n");
-        return NULL;
-     }
-
-   un->type = EET_STRUCT1;
-   _st1_set(&(un->u.st1), atof(v1), atoi(v2), eina_stringshare_add(v3));
-
-   return un;
-}
-
-static Example_Union *
-_union_2_new(const char *v1,
-             const char *v2)
-{
-   Example_Union *un = calloc(1, sizeof(Example_Union));
-   if (!un)
-     {
-        fprintf(
-          stderr, "ERROR: could not allocate an Example_Union struct.\n");
-        return NULL;
-     }
-
-   un->type = EET_STRUCT2;
-   _st2_set(&(un->u.st2), atoi(v1), atoi(v2));
-
-   return un;
-}
-
-static Example_Union *
-_union_3_new(const char *v1)
-{
-   Example_Union *un = calloc(1, sizeof(Example_Union));
-   if (!un)
-     {
-        fprintf(
-          stderr, "ERROR: could not allocate an Example_Union struct.\n");
-        return NULL;
-     }
-
-   un->type = EET_STRUCT3;
-   _st3_set(&(un->u.st3), atoi(v1));
-
-   return un;
-}
-
-static Example_Variant *
-_variant_1_new(const char *v1,
-               const char *v2,
-               const char *v3)
-{
-   Example_Struct1 *st1;
-   Example_Variant *va = calloc(1, sizeof(Example_Variant));
-   if (!va)
-     {
-        fprintf(
-          stderr, "ERROR: could not allocate an Example_Variant struct.\n");
-        return NULL;
-     }
-
-   va = calloc(1, sizeof (Example_Variant));
-   va->t.type = eet_mapping[0].name;
-   st1 = calloc(1, sizeof (Example_Struct1));
-   _st1_set(st1, atof(v1), atoi(v2), eina_stringshare_add(v3));
-   va->data = st1;
-
-   return va;
-}
-
-static Example_Variant *
-_variant_2_new(const char *v1,
-               const char *v2)
-{
-   printf("varinant 2 new\n");
-
-   Example_Struct2 *st2;
-   Example_Variant *va = calloc(1, sizeof(Example_Variant));
-   if (!va)
-     {
-        fprintf(
-          stderr, "ERROR: could not allocate an Example_Variant struct.\n");
-        return NULL;
-     }
-
-   va = calloc(1, sizeof (Example_Variant));
-
-   va->t.type = eet_mapping[1].name;
-
-   printf("type gets %s\n", va->t.type);
-
-   st2 = calloc(1, sizeof (Example_Struct2));
-   _st2_set(st2, atoi(v1), atoi(v2));
-   va->data = st2;
-
-   return va;
-}
-
-static Example_Variant *
-_variant_3_new(const char *v1)
-{
-   Example_Struct3 *st3;
-   Example_Variant *va = calloc(1, sizeof(Example_Variant));
-   if (!va)
-     {
-        fprintf(
-          stderr, "ERROR: could not allocate an Example_Variant struct.\n");
-        return NULL;
-     }
-
-   va = calloc(1, sizeof (Example_Variant));
-   va->t.type = eet_mapping[2].name;
-   st3 = calloc(1, sizeof (Example_Struct3));
-   _st3_set(st3, atoi(v1));
-   va->data = st3;
-
-   return va;
-}
-
-static Example_Lists *
-_data_new(void)
-{
-   Example_Lists *example_lists = calloc(1, sizeof(Example_Lists));
-   if (!example_lists)
-     {
-        fprintf(stderr, "ERROR: could not allocate a Example_Lists struct.\n");
-        return NULL;
-     }
-
-   return example_lists;
-} /* _data_new */
-
-static void
-_union_free(Example_Union *un)
-{
-   if (un->type == EET_STRUCT1)
-     {
-        Example_Struct1 *st1 = &(un->u.st1);
-        _string_free(st1->s1);
-     }
-
-   free(un);
-}
-
-static void
-_variant_free(Example_Variant *va)
-{
-   if (!strcmp(va->t.type, eet_mapping[0].name))
-     {
-        Example_Struct1 *st1 = va->data;
-        _string_free(st1->s1);
-     }
-
-   free(va->data);
-   free(va);
-}
-
-static void
-_data_free(Example_Lists *cache)
-{
-   Example_Union *un;
-   Example_Variant *va;
-
-   EINA_LIST_FREE(cache->union_list, un)
-     _union_free(un);
-
-   EINA_LIST_FREE(cache->variant_list, va)
-     _variant_free(va);
-
-   free(cache);
-} /* _data_free */
-
-static Example_Lists *
-_data_load(const char *filename)
-{
-   Example_Lists *data;
-   Eet_File *ef = eet_open(filename, EET_FILE_MODE_READ);
-   if (!ef)
-     {
-        fprintf(stderr, "ERROR: could not open '%s' for read\n", filename);
-        return NULL;
-     }
-
-   data = eet_data_read(ef, _lists_descriptor, CACHE_FILE_ENTRY);
-   if (!data)
-     {
-        eet_close(ef);
-        return NULL;
-     }
-
-   if (_cache_file)
-     eet_close(_cache_file);
-
-   _cache_file = ef;
-   _cache_dict = eet_dictionary_get(ef);
-
-   return data;
-} /* _data_load */
-
-static Eina_Bool
-_data_save(const Example_Lists *cache,
-           const char          *filename)
-{
-   char tmp[PATH_MAX];
-   Eet_File *ef;
-   Eina_Bool ret;
-   unsigned int i, len;
-   struct stat st;
-
-   len = eina_strlcpy(tmp, filename, sizeof(tmp));
-   if (len + 12 >= (int)sizeof(tmp))
-     {
-        fprintf(stderr, "ERROR: file name is too big: %s\n", filename);
-        return EINA_FALSE;
-     }
-
-   i = 0;
-   do
-     {
-        snprintf(tmp + len, 12, ".%u", i);
-        i++;
-     }
-   while (stat(tmp, &st) == 0);
-
-   ef = eet_open(tmp, EET_FILE_MODE_WRITE);
-   if (!ef)
-     {
-        fprintf(stderr, "ERROR: could not open '%s' for write\n", tmp);
-        return EINA_FALSE;
-     }
-
-   ret = eet_data_write
-       (ef, _lists_descriptor, CACHE_FILE_ENTRY, cache, EINA_TRUE);
-
-   eet_close(ef);
-
-   if (ret)
-     {
-        unlink(filename);
-        rename(tmp, filename);
-     }
-
-   return ret;
-} /* _data_save */
-
-static void
-_print_union(const Example_Union *un)
-{
-   printf("\t  |   type: %s'\n", eet_mapping[un->type - 1].name);
-
-   switch (un->type)
-     {
-      case EET_STRUCT1:
-        printf("\t\t  val1: %f\n", un->u.st1.val1);
-        printf("\t\t  stuff: %d\n", un->u.st1.stuff);
-        printf("\t\t  s1: %s\n", un->u.st1.s1);
-        break;
-
-      case EET_STRUCT2:
-        printf("\t\t  val1: %i\n", un->u.st2.b1);
-        printf("\t\t  stuff: %lli\n", un->u.st2.v1);
-        break;
-
-      case EET_STRUCT3:
-        printf("\t\t  val1: %i\n", un->u.st3.body);
-        break;
-
-      default:
-        return;
-     }
-}
-
-static void
-_print_variant(const Example_Variant *va)
-{
-   printf("\t  |   type: %s'\n", va->t.type);
-
-   switch (va->t.type[2])
-     {
-      case '1':
-      {
-         Example_Struct1 *st1 = va->data;
-
-         printf("\t\t  val1: %f\n", st1->val1);
-         printf("\t\t  stuff: %d\n", st1->stuff);
-         printf("\t\t  s1: %s\n", st1->s1);
-      }
-      break;
-
-      case '2':
-      {
-         Example_Struct2 *st2 = va->data;
-
-         printf("\t\t  val1: %i\n", st2->b1);
-         printf("\t\t  stuff: %lli\n", st2->v1);
-      }
-      break;
-
-      case '3':
-      {
-         Example_Struct3 *st3 = va->data;
-
-         printf("\t\t  val1: %i\n", st3->body);
-      }
-      break;
-
-      default:
-        return;
-     }
-}
-
-int
-main(int   argc,
-     char *argv[])
-{
-   Example_Lists *data_lists;
-   int ret = 0;
-
-   if (argc < 3)
-     {
-        fprintf(stderr,
-                "Usage:\n\t%s <input> <output> [action action-params]\n\n"
-                "where actions and their parameters are:\n"
-                "\tunion <type> [fields]\n"
-                "\tvariant <type> [fields]\n"
-                "\n",
-                argv[0]);
-        return -1;
-     }
-
-   eina_init();
-   eet_init();
-   _data_descriptors_init();
-
-   data_lists = _data_load(argv[1]);
-   if (!data_lists)
-     {
-        printf("Creating new data lists.\n");
-        data_lists = _data_new();
-        if (!data_lists)
-          {
-             ret = -2;
-             goto end;
-          }
-     }
-
-   if (argc > 3)
-     {
-        if (strcmp(argv[3], "union") == 0)
-          {
-             if (argc > 4)
-               {
-                  int type = atoi(argv[4]);
-                  Example_Union *un;
-
-                  if (type < EET_STRUCT1 || type > EET_STRUCT3)
-                    {
-                       fprintf(stderr,
-                               "ERROR: invalid type parameter (%s).\n",
-                               argv[4]);
-                       goto cont;
-                    }
-
-                  switch (type)
-                    {
-                     case 1:
-                       if (argc != 8)
-                         {
-                            fprintf(
-                              stderr, "ERROR: wrong number of parameters"
-                                      " (%d).\n", argc);
-                            goto cont;
-                         }
-
-                       un = _union_1_new(
-                           argv[5], argv[6], argv[7]);
-                       if (!un)
-                         {
-                            fprintf(
-                              stderr, "ERROR: could not create the "
-                                      "requested union.\n");
-                            goto cont;
-                         }
-                       data_lists->union_list =
-                         eina_list_append(data_lists->union_list, un);
-                       break;
-
-                     case 2:
-                       if (argc != 7)
-                         {
-                            fprintf(
-                              stderr, "ERROR: wrong number of parameters"
-                                      " (%d).\n", argc);
-                            goto cont;
-                         }
-
-                       un = _union_2_new(argv[5], argv[6]);
-                       if (!un)
-                         {
-                            fprintf(
-                              stderr, "ERROR: could not create the "
-                                      "requested union.\n");
-                            goto cont;
-                         }
-                       data_lists->union_list =
-                         eina_list_append(data_lists->union_list, un);
-                       break;
-
-                     case 3:
-                       if (argc != 6)
-                         {
-                            fprintf(
-                              stderr, "ERROR: wrong number of parameters"
-                                      " (%d).\n", argc);
-                            goto cont;
-                         }
-
-                       un = _union_3_new(argv[5]);
-                       if (!un)
-                         {
-                            fprintf(
-                              stderr, "ERROR: could not create the "
-                                      "requested union.\n");
-                            goto cont;
-                         }
-                       data_lists->union_list =
-                         eina_list_append(data_lists->union_list, un);
-                       break;
-
-                     default:
-                       fprintf(
-                         stderr, "ERROR: bad type of of struct passed\n");
-                       goto cont;
-                    }
-               }
-             else
-               fprintf(stderr,
-                       "ERROR: wrong number of parameters (%d).\n",
-                       argc);
-          }
-        else if (strcmp(argv[3], "variant") == 0)
-          {
-             if (argc > 4)
-               {
-                  int type = atoi(argv[4]);
-                  Example_Variant *va;
-
-                  if (type < EET_STRUCT1 || type > EET_STRUCT3)
-                    {
-                       fprintf(stderr,
-                               "ERROR: invalid type parameter (%s).\n",
-                               argv[4]);
-                       goto cont;
-                    }
-
-                  switch (type)
-                    {
-                     case 1:
-                       if (argc != 8)
-                         {
-                            fprintf(
-                              stderr, "ERROR: wrong number of parameters"
-                                      " (%d).\n", argc);
-                            goto cont;
-                         }
-
-                       va = _variant_1_new(
-                           argv[5], argv[6], argv[7]);
-                       if (!va)
-                         {
-                            fprintf(
-                              stderr, "ERROR: could not create the "
-                                      "requested variant.\n");
-                            goto cont;
-                         }
-                       data_lists->variant_list =
-                         eina_list_append(data_lists->variant_list, va);
-                       break;
-
-                     case 2:
-                       if (argc != 7)
-                         {
-                            fprintf(
-                              stderr, "ERROR: wrong number of parameters"
-                                      " (%d).\n", argc);
-                            goto cont;
-                         }
-
-                       va = _variant_2_new(argv[5], argv[6]);
-                       if (!va)
-                         {
-                            fprintf(
-                              stderr, "ERROR: could not create the "
-                                      "requested variant.\n");
-                            goto cont;
-                         }
-                       data_lists->variant_list =
-                         eina_list_append(data_lists->variant_list, va);
-                       break;
-
-                     case 3:
-                       if (argc != 6)
-                         {
-                            fprintf(
-                              stderr, "ERROR: wrong number of parameters"
-                                      " (%d).\n", argc);
-                            goto cont;
-                         }
-
-                       va = _variant_3_new(argv[5]);
-                       if (!va)
-                         {
-                            fprintf(
-                              stderr, "ERROR: could not create the "
-                                      "requested variant.\n");
-                            goto cont;
-                         }
-                       data_lists->variant_list =
-                         eina_list_append(data_lists->variant_list, va);
-                       break;
-
-                     default:
-                       fprintf(
-                         stderr, "ERROR: bad type of of struct passed\n");
-                       goto cont;
-                    }
-               }
-             else
-               fprintf(stderr,
-                       "ERROR: wrong number of parameters (%d).\n",
-                       argc);
-          }
-        else
-          fprintf(stderr, "ERROR: unknown action '%s'\n", argv[3]);
-     }
-
-cont:
-   printf("Cached data:\n");
-
-   printf("\tstats: unions=%u, variants=%u\n",
-          eina_list_count(data_lists->union_list),
-          eina_list_count(data_lists->variant_list));
-
-   if (eina_list_count(data_lists->union_list))
-     {
-        const Eina_List *l;
-        const Example_Union *un;
-        printf("\t  * union list:\n");
-
-        EINA_LIST_FOREACH(data_lists->union_list, l, un)
-          {
-             _print_union(un);
-          }
-     }
-
-   if (eina_list_count(data_lists->variant_list))
-     {
-        const Eina_List *l;
-        const Example_Variant *un;
-        printf("\t  * variant list:\n");
-
-        EINA_LIST_FOREACH(data_lists->variant_list, l, un)
-          {
-             _print_variant(un);
-          }
-     }
-
-   printf("\n");
-
-   if (!_data_save(data_lists, argv[2]))
-     ret = -3;
-
-   _data_free(data_lists);
-
-end:
-   if (_cache_file)
-     eet_close(_cache_file);
-   _data_descriptors_shutdown();
-   eet_shutdown();
-   eina_shutdown();
-
-   return ret;
-} /* main */
-
diff --git a/libraries/eet/src/examples/eet-data-nested.c b/libraries/eet/src/examples/eet-data-nested.c
deleted file mode 100644
index a6b0e12..0000000
--- a/libraries/eet/src/examples/eet-data-nested.c
+++ /dev/null
@@ -1,272 +0,0 @@
-/*
- * build: gcc -o eet_data_nested eet-data-nested.c `pkg-config --cflags --libs eet eina`
- */
-#include <Eina.h>
-#include <Eet.h>
-#include <stdio.h>
-#include <limits.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <unistd.h>
-
-// The struct that will be loaded and saved.
-// note that only the members described in the eet_data_descriptor
-// will be automatically handled. The other members will have their
-// space reserved and zeroed (as it uses calloc()), but not
-// saved or loaded from eet files.
-typedef struct
-{
-   unsigned int version; // it is recommended to use versioned configuration!
-   const char  *name;
-   int          id;
-   int          not_saved_value; // example of not saved data inside!
-   Eina_Bool    enabled;
-   Eina_List   *subs;
-} My_Conf_Type;
-
-typedef struct
-{
-   const char *server;
-   int         port;
-} My_Conf_Subtype;
-
-// string that represents the entry in eet file, you might like to have
-// different profiles or so in the same file, this is possible with
-// different strings
-static const char MY_CONF_FILE_ENTRY[] = "config";
-
-// keep the descriptor static global, so it can be
-// shared by different functions (load/save) of this and only this
-// file.
-static Eet_Data_Descriptor *_my_conf_descriptor;
-static Eet_Data_Descriptor *_my_conf_sub_descriptor;
-
-static void
-_my_conf_descriptor_init(void)
-{
-   Eet_Data_Descriptor_Class eddc;
-
-   // The class describe the functions to use to create the type and its
-   // full allocated size.
-   //
-   // Eina types are very convenient, so use them to create the descriptor,
-   // so we get eina_list,  eina_hash and eina_stringshare automatically!
-   //
-   // The STREAM variant is better for configuration files as the values
-   // will likely change a lot.
-   //
-   // The other variant, FILE, is good for caches and things that are just
-   // appended, but needs to take care when changing strings and files must
-   // be kept open so mmap()ed strings will be kept alive.
-   EET_EINA_STREAM_DATA_DESCRIPTOR_CLASS_SET(&eddc, My_Conf_Type);
-   _my_conf_descriptor = eet_data_descriptor_stream_new(&eddc);
-
-   EET_EINA_STREAM_DATA_DESCRIPTOR_CLASS_SET(&eddc, My_Conf_Subtype);
-   _my_conf_sub_descriptor = eet_data_descriptor_stream_new(&eddc);
-
-   // Describe the members to be saved:
-   // Use a temporary macro so we don't type a lot, also avoid errors:
-#define MY_CONF_ADD_BASIC(member, eet_type) \
-  EET_DATA_DESCRIPTOR_ADD_BASIC             \
-    (_my_conf_descriptor, My_Conf_Type, # member, member, eet_type)
-#define MY_CONF_SUB_ADD_BASIC(member, eet_type) \
-  EET_DATA_DESCRIPTOR_ADD_BASIC                 \
-    (_my_conf_sub_descriptor, My_Conf_Subtype, # member, member, eet_type)
-
-   MY_CONF_SUB_ADD_BASIC(server, EET_T_STRING);
-   MY_CONF_SUB_ADD_BASIC(port, EET_T_INT);
-
-   MY_CONF_ADD_BASIC(version, EET_T_UINT);
-   MY_CONF_ADD_BASIC(name, EET_T_STRING);
-   MY_CONF_ADD_BASIC(id, EET_T_INT);
-   MY_CONF_ADD_BASIC(enabled, EET_T_UCHAR);
-
-   // And add the sub descriptor as a linked list at 'subs' in the main struct
-   EET_DATA_DESCRIPTOR_ADD_LIST
-     (_my_conf_descriptor, My_Conf_Type, "subs", subs, _my_conf_sub_descriptor);
-
-#undef MY_CONF_ADD_BASIC
-#undef MY_CONF_SUB_ADD_BASIC
-} /* _my_conf_descriptor_init */
-
-static void
-_my_conf_descriptor_shutdown(void)
-{
-   eet_data_descriptor_free(_my_conf_sub_descriptor);
-   eet_data_descriptor_free(_my_conf_descriptor);
-} /* _my_conf_descriptor_shutdown */
-
-static My_Conf_Type *
-_my_conf_new(void)
-{
-   My_Conf_Type *my_conf = calloc(1, sizeof(My_Conf_Type));
-   My_Conf_Subtype *sub;
-   if (!my_conf)
-     {
-        fprintf(stderr, "ERROR: could not calloc My_Conf_Type\n");
-        return NULL;
-     }
-
-   my_conf->version = 0x112233;
-   my_conf->enabled = EINA_TRUE;
-
-   sub = calloc(1, sizeof(My_Conf_Subtype));
-   if (sub)
-     {
-        sub->server = eina_stringshare_add("my-server.com");
-        sub->port = 1234;
-        my_conf->subs = eina_list_append(my_conf->subs, sub);
-     }
-
-   return my_conf;
-} /* _my_conf_new */
-
-static void
-_my_conf_free(My_Conf_Type *my_conf)
-{
-   My_Conf_Subtype *sub;
-   EINA_LIST_FREE(my_conf->subs, sub)
-     {
-        eina_stringshare_del(sub->server);
-        free(sub);
-     }
-
-   eina_stringshare_del(my_conf->name);
-   free(my_conf);
-} /* _my_conf_free */
-
-static My_Conf_Type *
-_my_conf_load(const char *filename)
-{
-   My_Conf_Type *my_conf;
-   Eet_File *ef = eet_open(filename, EET_FILE_MODE_READ);
-   if (!ef)
-     {
-        fprintf(stderr, "ERROR: could not open '%s' for read\n", filename);
-        return NULL;
-     }
-
-   my_conf = eet_data_read(ef, _my_conf_descriptor, MY_CONF_FILE_ENTRY);
-   if (!my_conf)
-     goto end;
-
-   if (my_conf->version < 0x112233)
-     {
-        fprintf(stderr,
-                "WARNING: version %#x was too old, upgrading it to %#x\n",
-                my_conf->version, 0x112233);
-
-        my_conf->version = 0x112233;
-        my_conf->enabled = EINA_TRUE;
-     }
-
-end:
-   eet_close(ef);
-   return my_conf;
-} /* _my_conf_load */
-
-static Eina_Bool
-_my_conf_save(const My_Conf_Type *my_conf,
-              const char         *filename)
-{
-   char tmp[PATH_MAX];
-   Eet_File *ef;
-   Eina_Bool ret;
-   unsigned int i, len;
-   struct stat st;
-
-   len = eina_strlcpy(tmp, filename, sizeof(tmp));
-   if (len + 12 >= (int)sizeof(tmp))
-     {
-        fprintf(stderr, "ERROR: file name is too big: %s\n", filename);
-        return EINA_FALSE;
-     }
-
-   i = 0;
-   do
-     {
-        snprintf(tmp + len, 12, ".%u", i);
-        i++;
-     }
-   while (stat(tmp, &st) == 0);
-
-   ef = eet_open(tmp, EET_FILE_MODE_WRITE);
-   if (!ef)
-     {
-        fprintf(stderr, "ERROR: could not open '%s' for write\n", tmp);
-        return EINA_FALSE;
-     }
-
-   ret = eet_data_write
-       (ef, _my_conf_descriptor, MY_CONF_FILE_ENTRY, my_conf, EINA_TRUE);
-   eet_close(ef);
-
-   if (ret)
-     {
-        unlink(filename);
-        rename(tmp, filename);
-     }
-
-   return ret;
-} /* _my_conf_save */
-
-int
-main(int   argc,
-     char *argv[])
-{
-   My_Conf_Type *my_conf;
-   const My_Conf_Subtype *sub;
-   const Eina_List *l;
-   int ret = 0;
-
-   if (argc != 3)
-     {
-        fprintf(stderr, "Usage:\n\t%s <input> <output>\n\n", argv[0]);
-        return -1;
-     }
-
-   eina_init();
-   eet_init();
-   _my_conf_descriptor_init();
-
-   my_conf = _my_conf_load(argv[1]);
-   if (!my_conf)
-     {
-        printf("creating new configuration.\n");
-        my_conf = _my_conf_new();
-        if (!my_conf)
-          {
-             ret = -2;
-             goto end;
-          }
-     }
-
-   printf("My_Conf_Type:\n"
-          "\tversion: %#x\n"
-          "\tname...: '%s'\n"
-          "\tid.....: %d\n"
-          "\tenabled: %hhu\n"
-          "\tsubs...:\n",
-          my_conf->version,
-          my_conf->name ? my_conf->name : "",
-          my_conf->id,
-          my_conf->enabled);
-
-   EINA_LIST_FOREACH(my_conf->subs, l, sub)
-     printf("\t\tserver: '%s', port: %d\n",
-            sub->server ? sub->server : "",
-            sub->port);
-
-   if (!_my_conf_save(my_conf, argv[2]))
-     ret = -3;
-
-   _my_conf_free(my_conf);
-
-end:
-   _my_conf_descriptor_shutdown();
-   eet_shutdown();
-   eina_shutdown();
-
-   return ret;
-} /* main */
-
diff --git a/libraries/eet/src/examples/eet-data-simple.c b/libraries/eet/src/examples/eet-data-simple.c
deleted file mode 100644
index 1951fc0..0000000
--- a/libraries/eet/src/examples/eet-data-simple.c
+++ /dev/null
@@ -1,224 +0,0 @@
-/*
- * build: gcc -o eet_data_simple eet-data-simple.c `pkg-config --cflags --libs eet eina`
- */
-#include <Eina.h>
-#include <Eet.h>
-#include <stdio.h>
-#include <limits.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <unistd.h>
-
-// The struct that will be loaded and saved.
-// note that only the members described in the eet_data_descriptor
-// will be automatically handled. The other members will have their
-// space reserved and zeroed (as it uses calloc()), but not
-// saved or loaded from eet files.
-typedef struct
-{
-   unsigned int version; // it is recommended to use versioned configuration!
-   const char  *name;
-   int          id;
-   int          not_saved_value; // example of not saved data inside!
-   Eina_Bool    enabled;
-} My_Conf_Type;
-
-// string that represents the entry in eet file, you might like to have
-// different profiles or so in the same file, this is possible with
-// different strings
-static const char MY_CONF_FILE_ENTRY[] = "config";
-
-// keep the descriptor static global, so it can be
-// shared by different functions (load/save) of this and only this
-// file.
-static Eet_Data_Descriptor *_my_conf_descriptor;
-
-static void
-_my_conf_descriptor_init(void)
-{
-   Eet_Data_Descriptor_Class eddc;
-
-   // The class describe the functions to use to create the type and its
-   // full allocated size.
-   //
-   // Eina types are very convenient, so use them to create the descriptor,
-   // so we get eina_list,  eina_hash and eina_stringshare automatically!
-   //
-   // The STREAM variant is better for configuration files as the values
-   // will likely change a lot.
-   //
-   // The other variant, FILE, is good for caches and things that are just
-   // appended, but needs to take care when changing strings and files must
-   // be kept open so mmap()ed strings will be kept alive.
-   EET_EINA_STREAM_DATA_DESCRIPTOR_CLASS_SET(&eddc, My_Conf_Type);
-   _my_conf_descriptor = eet_data_descriptor_stream_new(&eddc);
-
-   // Describe the members to be saved:
-   // Use a temporary macro so we don't type a lot, also avoid errors:
-#define MY_CONF_ADD_BASIC(member, eet_type) \
-  EET_DATA_DESCRIPTOR_ADD_BASIC             \
-    (_my_conf_descriptor, My_Conf_Type, # member, member, eet_type)
-
-   MY_CONF_ADD_BASIC(version, EET_T_UINT);
-   MY_CONF_ADD_BASIC(name, EET_T_STRING);
-   MY_CONF_ADD_BASIC(id, EET_T_INT);
-   MY_CONF_ADD_BASIC(enabled, EET_T_UCHAR);
-
-#undef MY_CONF_ADD_BASIC
-} /* _my_conf_descriptor_init */
-
-static void
-_my_conf_descriptor_shutdown(void)
-{
-   eet_data_descriptor_free(_my_conf_descriptor);
-} /* _my_conf_descriptor_shutdown */
-
-static My_Conf_Type *
-_my_conf_new(void)
-{
-   My_Conf_Type *my_conf = calloc(1, sizeof(My_Conf_Type));
-   if (!my_conf)
-     {
-        fprintf(stderr, "ERROR: could not calloc My_Conf_Type\n");
-        return NULL;
-     }
-
-   my_conf->version = 0x112233;
-   my_conf->enabled = EINA_TRUE;
-   return my_conf;
-} /* _my_conf_new */
-
-static void
-_my_conf_free(My_Conf_Type *my_conf)
-{
-   eina_stringshare_del(my_conf->name);
-   free(my_conf);
-} /* _my_conf_free */
-
-static My_Conf_Type *
-_my_conf_load(const char *filename)
-{
-   My_Conf_Type *my_conf;
-   Eet_File *ef = eet_open(filename, EET_FILE_MODE_READ);
-   if (!ef)
-     {
-        fprintf(stderr, "ERROR: could not open '%s' for read\n", filename);
-        return NULL;
-     }
-
-   my_conf = eet_data_read(ef, _my_conf_descriptor, MY_CONF_FILE_ENTRY);
-   if (!my_conf)
-     goto end;
-
-   if (my_conf->version < 0x112233)
-     {
-        fprintf(stderr,
-                "WARNING: version %#x was too old, upgrading it to %#x\n",
-                my_conf->version, 0x112233);
-
-        my_conf->version = 0x112233;
-        my_conf->enabled = EINA_TRUE;
-     }
-
-end:
-   eet_close(ef);
-   return my_conf;
-} /* _my_conf_load */
-
-static Eina_Bool
-_my_conf_save(const My_Conf_Type *my_conf,
-              const char         *filename)
-{
-   char tmp[PATH_MAX];
-   Eet_File *ef;
-   Eina_Bool ret;
-   unsigned int i, len;
-   struct stat st;
-
-   len = eina_strlcpy(tmp, filename, sizeof(tmp));
-   if (len + 12 >= (int)sizeof(tmp))
-     {
-        fprintf(stderr, "ERROR: file name is too big: %s\n", filename);
-        return EINA_FALSE;
-     }
-
-   i = 0;
-   do
-     {
-        snprintf(tmp + len, 12, ".%u", i);
-        i++;
-     }
-   while (stat(tmp, &st) == 0);
-
-   ef = eet_open(tmp, EET_FILE_MODE_WRITE);
-   if (!ef)
-     {
-        fprintf(stderr, "ERROR: could not open '%s' for write\n", tmp);
-        return EINA_FALSE;
-     }
-
-   ret = eet_data_write
-       (ef, _my_conf_descriptor, MY_CONF_FILE_ENTRY, my_conf, EINA_TRUE);
-   eet_close(ef);
-
-   if (ret)
-     {
-        unlink(filename);
-        rename(tmp, filename);
-     }
-
-   return ret;
-} /* _my_conf_save */
-
-int
-main(int   argc,
-     char *argv[])
-{
-   My_Conf_Type *my_conf;
-   int ret = 0;
-
-   if (argc != 3)
-     {
-        fprintf(stderr, "Usage:\n\t%s <input> <output>\n\n", argv[0]);
-        return -1;
-     }
-
-   eina_init();
-   eet_init();
-   _my_conf_descriptor_init();
-
-   my_conf = _my_conf_load(argv[1]);
-   if (!my_conf)
-     {
-        printf("creating new configuration.\n");
-        my_conf = _my_conf_new();
-        if (!my_conf)
-          {
-             ret = -2;
-             goto end;
-          }
-     }
-
-   printf("My_Conf_Type:\n"
-          "\tversion: %#x\n"
-          "\tname...: '%s'\n"
-          "\tid.....: %d\n"
-          "\tenabled: %hhu\n",
-          my_conf->version,
-          my_conf->name ? my_conf->name : "",
-          my_conf->id,
-          my_conf->enabled);
-
-   if (!_my_conf_save(my_conf, argv[2]))
-     ret = -3;
-
-   _my_conf_free(my_conf);
-
-end:
-   _my_conf_descriptor_shutdown();
-   eet_shutdown();
-   eina_shutdown();
-
-   return ret;
-} /* main */
-
diff --git a/libraries/eet/src/examples/eet-file.c b/libraries/eet/src/examples/eet-file.c
deleted file mode 100644
index 740c179..0000000
--- a/libraries/eet/src/examples/eet-file.c
+++ /dev/null
@@ -1,127 +0,0 @@
-/*
- * build: gcc -o eet_file eet-file.c `pkg-config --cflags --libs eet`
- */
-#include <Eet.h>
-#include <stdio.h>
-#include <string.h>
-
-static int
-create_eet_file(void)
-{
-   Eet_File *ef;
-   char buf[1024], *ptr;
-   int size, len, i;
-   const char *some_strings[] = {
-      "And some more strings",
-      "spread across several",
-      "elements of an array!"
-   };
-   const char some_data[] =
-     "\x1e\xe7\x0f\x42\x00\x00\x00\x01\x00\x00\x00\x00\x00\x00\x00\x35"
-     "\x00\x00\x00\xa0\x00\x00\x00\xa0\x00\x00\x00\x24\x00\x00\x00\x11"
-     "\x00\x00\x00\x00\x2f\x6d\x69\x73\x74\x65\x72\x69\x6f\x75\x73\x2f"
-     "\x64\x61\x74\x61\x00\x41\x6e\x20\x45\x45\x54\x20\x69\x6e\x73\x69"
-     "\x64\x65\x20\x6f\x66\x20\x61\x6e\x20\x45\x45\x54\x21\x0a\x54\x68"
-     "\x69\x73\x20\x77\x61\x73\x6e\x27\x74\x20\x72\x65\x61\x6c\x6c\x79"
-     "\x20\x75\x73\x65\x66\x75\x6c\x20\x62\x75\x74\x20\x69\x74\x20\x68"
-     "\x65\x6c\x70\x65\x64\x20\x74\x6f\x20\x73\x68\x6f\x77\x20\x68\x6f"
-     "\x77\x0a\x74\x6f\x20\x75\x73\x65\x20\x65\x65\x74\x5f\x6d\x65\x6d"
-     "\x6f\x70\x65\x6e\x5f\x72\x65\x61\x64\x28\x29\x20\x74\x6f\x20\x6f"
-     "\x70\x65\x6e\x20\x61\x6e\x20\x65\x65\x74\x20\x66\x69\x6c\x65\x20"
-     "\x66\x72\x6f\x6d\x0a\x64\x61\x74\x61\x20\x61\x6c\x72\x65\x61\x64"
-     "\x79\x20\x6c\x6f\x61\x64\x65\x64\x20\x69\x6e\x20\x6d\x65\x6d\x6f"
-     "\x72\x79\x2e\x0a\x00";
-
-   ef = eet_open("/tmp/my_file.eet", EET_FILE_MODE_WRITE);
-   if (!ef) return 0;
-
-   strcpy(buf, "Here is a string of data to save!");
-   size = eet_write(ef, "/key/to_store/at", buf, sizeof(buf), 1);
-   if (!size)
-     {
-        fprintf(stderr, "Error writing data!\n");
-        eet_close(ef);
-        return 0;
-     }
-   len = strlen(buf);
-   printf("strlen() = %d, eet_write() = %d\n", len, size);
-
-   ptr = buf;
-   for (i = 0; i < 3; i++)
-     {
-        len = strlen(some_strings[i]) + 1;
-        memcpy(ptr, some_strings[i], len);
-        ptr += len;
-     }
-   eet_write(ef, "/several/strings", buf, sizeof(buf), 1);
-   eet_sync(ef);
-
-   eet_write(ef, "/some/mysterious/data", some_data, sizeof(some_data) - 1, 1);
-
-   eet_delete(ef, "/several/strings");
-
-   return eet_close(ef) == EET_ERROR_NONE;
-}
-
-int
-main(void)
-{
-   Eet_File *ef;
-   char *ret, **list;
-   int size, num, i;
-
-   eet_init();
-
-   if (!create_eet_file())
-     return -1;
-
-   ef = eet_open("/tmp/my_file.eet", EET_FILE_MODE_READ);
-   if (!ef) return -1;
-
-   list = eet_list(ef, "*", &num);
-   if (list)
-     {
-        for (i = 0; i < num; i++)
-          printf("Key stored: %s\n", list[i]);
-        free(list);
-     }
-
-   ret = eet_read(ef, "/key/to_store/at", &size);
-   if (ret)
-     {
-        printf("Data read (%i bytes):\n%s\n", size, ret);
-        free(ret);
-     }
-
-   ret = eet_read(ef, "/several/strings", &size);
-   if (ret)
-     {
-        printf("More data read (%i bytes):\n%s\n", size, ret);
-        free(ret);
-     }
-
-   ret = eet_read(ef, "/some/mysterious/data", &size);
-   if (ret)
-     {
-        Eet_File *ef2;
-
-        ef2 = eet_memopen_read(ret, size);
-
-        num = eet_num_entries(ef2);
-        printf("Mysterious data has %d entries\n", num);
-
-        printf("Mysterious data:\n%s\n",
-               (char *)eet_read_direct(ef2, "/mysterious/data", NULL));
-
-        eet_close(ef2);
-
-        free(ret);
-     }
-
-   eet_close(ef);
-
-   eet_shutdown();
-
-   return 0;
-}
-
diff --git a/libraries/eet/src/lib/Eet.h b/libraries/eet/src/lib/Eet.h
deleted file mode 100644
index 7495090..0000000
--- a/libraries/eet/src/lib/Eet.h
+++ /dev/null
@@ -1,4180 +0,0 @@
-/**
-   @brief Eet Data Handling Library Public API Calls
-
-   These routines are used for Eet Library interaction
-
-   @mainpage Eet Library Documentation
-
-   @version 1.5.0
-   @date 2000-2012
-
-   Please see the @ref authors page for contact details.
-
-   @section toc Table of Contents
-
-   @li @ref intro
-   @li @ref example
-   @li @ref compiling
-   @li @ref install
-   @li @ref next_steps
-   @li @ref intro_example
-
-   @section intro What is Eet?
-
-   It is a tiny library designed to write an arbitrary set of chunks of data
-   to a file and optionally compress each chunk (very much like a zip file)
-   and allow fast random-access reading of the file later on. It does not
-   do zip as a zip itself has more complexity than is needed, and it was much
-   simpler to implement this once here.
-
-   Eet is extremely fast, small and simple. Eet files can be very small and
-   highly compressed, making them very optimal for just sending across the
-   internet without having to archive, compress or decompress and install them.
-   They allow for lightning-fast random-access reads once created, making them
-   perfect for storing data that is written once (or rarely) and read many
-   times, but the program does not want to have to read it all in at once.
-
-   It also can encode and decode data structures in memory, as well as image
-   data for saving to Eet files or sending across the network to other
-   machines, or just writing to arbitrary files on the system. All data is
-   encoded in a platform independent way and can be written and read by any
-   architecture.
-
-   @section example A simple example on using Eet
-
-   Here is a simple example on how to use Eet to save a series of strings to a
-   file and load them again. The advantage of using Eet over just
-   fprintf() and
-   fscanf() is that not only can these entries be strings, they need no special
-   parsing to handle delimiter characters or escaping, they can be binary data,
-   image data, data structures containing integers, strings, other data
-   structures, linked lists and much more, without the programmer having to
-   worry about parsing, and best of all, Eet is very fast.
-
-   This is just a very simple example that doesn't show all of the capabilities
-   of Eet, but it serves to illustrate its simplicity.
-
-   @include eet-basic.c
-
-   @section compiling How to compile using Eet ?
-
-   Eet is a library your application links to. The procedure for this is very
-   simple. You simply have to compile your application with the appropriate
-   compiler flags that the @p pkg-config script outputs. For example:
-
-   Compiling C or C++ files into object files:
-
-   @verbatim
-   gcc -c -o main.o main.c `pkg-config --cflags eet`
-   @endverbatim
-
-   Linking object files into a binary executable:
-
-   @verbatim
-   gcc -o my_application main.o `pkg-config --libs eet`
-   @endverbatim
-
-   You simply have to make sure that pkg-config is in your shell's PATH (see
-   the manual page for your appropriate shell) and eet.pc in /usr/lib/pkgconfig
-   or its path is in the PKG_CONFIG_PATH environment variable. It's that simple
-   to link and use Eet once you have written your code to use it.
-
-   Since the program is linked to Eet, it is now able to use any advertised
-   API calls to serialize your data.
-
-   You should make sure you add any extra compile and link flags to your
-   compile commands that your application may need as well. The above example
-   is only guaranteed to make Eet add it's own requirements.
-
-
-   @section install How is it installed?
-
-   Simple:
-
-   @verbatim
-   ./configure
-   make
-   su -
-   ...
-   make install
-   @endverbatim
-
-   @section next_steps Next Steps
-
-   After you understood what Eet is and installed it in your system you
-   should proceed understanding the programming interface. We'd recommend
-   you to take a while to learn Eina
-   (http://docs.enlightenment.org/auto/eina/) as it is very convenient
-   and optimized, and Eet provides integration with it.
-
-   Recommended reading:
-
-   @li @ref Eet_File_Group to know the basics to open and save files.
-   @li @ref Eet_Data_Group to know the convenient way to serialize and
-    parse your data structures automatically. Just create your
-    descriptors and let Eet do the work for you.
-
-   @section intro_example Introductory Examples
-
-   @ref Examples
-
-   @todo Document data format for images and data structures.
-
- */
-
-/**
-   @page authors Authors
-   @author Carsten Haitzler <raster@@rasterman.com>
-   @author David Goodlad <dgoodlad@@gmail.com>
-   @author Cedric Bail <cedric.bail@@free.fr>
-   @author Arnaud de Turckheim <quarium@@gmail.com>
-   @author Luis Felipe Strano Moraes <lfelipe@@profusion.mobi>
-   @author Chidambar Zinnoury <illogict@@online.fr>
-   @author Vincent Torri <vtorri@@univ-evry.fr>
-   @author Gustavo Sverzut Barbieri <barbieri@@profusion.mobi>
-   @author Raphael Kubo da Costa <kubo@@profusion.mobi>
-   @author Mathieu Taillefumier <mathieu.taillefumier@@free.fr>
-   @author Albin "Lutin" Tonnerre <albin.tonnerre@@gmail.com>
-   @author Adam Simpkins <adam@@adamsimpkins.net>
-   @author Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
-
-   Please contact <enlightenment-devel@lists.sourceforge.net> to get in
-   contact with the developers and maintainers.
- */
-
-#ifndef _EET_H
-#define _EET_H
-
-#include <stdlib.h>
-#include <stdio.h>
-#include <Eina.h>
-
-#ifdef EAPI
-# undef EAPI
-#endif /* ifdef EAPI */
-
-#ifdef _WIN32
-# ifdef EFL_EET_BUILD
-#  ifdef DLL_EXPORT
-#   define EAPI __declspec(dllexport)
-#  else /* ifdef DLL_EXPORT */
-#   define EAPI
-#  endif /* ! DLL_EXPORT */
-# else /* ifdef EFL_EET_BUILD */
-#  define EAPI __declspec(dllimport)
-# endif /* ! EFL_EET_BUILD */
-#else /* ifdef _WIN32 */
-# ifdef __GNUC__
-#  if __GNUC__ >= 4
-#   define EAPI __attribute__ ((visibility("default")))
-#  else /* if __GNUC__ >= 4 */
-#   define EAPI
-#  endif /* if __GNUC__ >= 4 */
-# else /* ifdef __GNUC__ */
-#  define EAPI
-# endif /* ifdef __GNUC__ */
-#endif /* ! _WIN32 */
-
-#ifdef __cplusplus
-extern "C" {
-#endif /* ifdef __cplusplus */
-
-/**
- * @file Eet.h
- * @brief The file that provides the eet functions.
- *
- * This header provides the Eet management functions.
- *
- */
-
-#define EET_VERSION_MAJOR 1
-#define EET_VERSION_MINOR 6
-/**
- * @typedef Eet_Version
- *
- * This is the Eet version information structure that can be used at
- * runtime to detect which version of eet is being used and adapt
- * appropriately as follows for example:
- *
- * @code
- * #if defined(EET_VERSION_MAJOR) && (EET_VERSION_MAJOR >= 1) && defined(EET_VERSION_MINOR) && (EET_VERSION_MINOR > 2)
- * printf("Eet version: %i.%i.%i\n",
- *        eet_version->major,
- *        eet_version->minor,
- *        eet_version->micro);
- * if (eet_version->revision > 0)
- *   {
- *     printf("  Built from SVN revision # %i\n", eet_version->revision);
- *   }
- * #endif
- * @endcode
- *
- * Note the #if check can be dropped if your program refuses to compile or
- * work with an Eet version less than 1.3.0.
- */
-typedef struct _Eet_Version
-{
-   int major; /** < major (binary or source incompatible changes) */
-   int minor; /** < minor (new features, bugfixes, major improvements version) */
-   int micro; /** < micro (bugfix, internal improvements, no new features version) */
-   int revision; /** < svn revision (0 if a proper rlease or the svn revsion number Eet is built from) */
-} Eet_Version;
-
-EAPI extern Eet_Version *eet_version;
-
-/**
- * @defgroup Eet_Group Top level functions
- * Functions that affect Eet as a whole.
- *
- * @{
- */
-
-/**
- * @enum _Eet_Error
- * All the error identifiers known by Eet.
- */
-typedef enum _Eet_Error
-{
-   EET_ERROR_NONE, /**< No error, it's all fine! */
-   EET_ERROR_BAD_OBJECT, /**< Given object or handle is NULL or invalid */
-   EET_ERROR_EMPTY, /**< There was nothing to do */
-   EET_ERROR_NOT_WRITABLE, /**< Could not write to file or file is #EET_FILE_MODE_READ */
-   EET_ERROR_OUT_OF_MEMORY, /**< Could not allocate memory */
-   EET_ERROR_WRITE_ERROR, /**< Failed to write data to destination */
-   EET_ERROR_WRITE_ERROR_FILE_TOO_BIG, /**< Failed to write file since it is too big */
-   EET_ERROR_WRITE_ERROR_IO_ERROR, /**< Failed to write due a generic Input/Output error */
-   EET_ERROR_WRITE_ERROR_OUT_OF_SPACE, /**< Failed to write due out of space */
-   EET_ERROR_WRITE_ERROR_FILE_CLOSED, /**< Failed to write because file was closed */
-   EET_ERROR_MMAP_FAILED, /**< Could not mmap file */
-   EET_ERROR_X509_ENCODING_FAILED, /**< Could not encode using X509 */
-   EET_ERROR_SIGNATURE_FAILED, /**< Could not validate signature */
-   EET_ERROR_INVALID_SIGNATURE, /**< Signature is invalid */
-   EET_ERROR_NOT_SIGNED, /**< File or contents are not signed */
-   EET_ERROR_NOT_IMPLEMENTED, /**< Function is not implemented */
-   EET_ERROR_PRNG_NOT_SEEDED, /**< Could not introduce random seed */
-   EET_ERROR_ENCRYPT_FAILED, /**< Could not encrypt contents */
-   EET_ERROR_DECRYPT_FAILED /**< Could not decrypt contents */
-} Eet_Error; /**< Eet error identifiers */
-
-/**
- * @}
- */
-
-/**
- * Initialize the EET library.
- *
- * The first time this function is called, it will perform all the internal
- * initialization required for the library to function properly and incrememnt
- * the initializiation counter. Any subsequent call only increment this counter
- * and return its new value, so it's safe to call this function more than once.
- *
- * @return The new init count. Will be 0 if initialization failed.
- *
- * @since 1.0.0
- * @ingroup Eet_Group
- */
-EAPI int
-eet_init(void);
-
-/**
- * Shut down the EET library.
- *
- * If eet_init() was called more than once for the running application,
- * eet_shutdown() will decrement the initialization counter and return its
- * new value, without doing anything else. When the counter reaches 0, all
- * of the internal elements will be shutdown and any memory used freed.
- *
- * @return The new init count.
- *
- * @since 1.0.0
- * @ingroup Eet_Group
- */
-EAPI int
-eet_shutdown(void);
-
-/**
- * Clear eet cache
- *
- * For a faster access to previously accessed data, Eet keeps an internal
- * cache of files. These files will be freed automatically only when
- * they are unused and the cache gets full, in order based on the last time
- * they were used.
- * On systems with little memory this may present an unnecessary constraint,
- * so eet_clearcache() is available for users to reclaim the memory used by
- * files that are no longer needed. Those that were open using
- * ::EET_FILE_MODE_WRITE or ::EET_FILE_MODE_READ_WRITE and have modifications,
- * will be written down to disk before flushing them from memory.
- *
- * @since 1.0.0
- * @ingroup Eet_Group
- */
-EAPI void
-eet_clearcache(void);
-
-/**
- * @defgroup Eet_File_Group Eet File Main Functions
- *
- * Functions to create, destroy and do basic manipulation of
- * #Eet_File handles.
- *
- * This sections explains how to use the most basic Eet functions, which
- * are used to work with eet files, read data from them, store it back in or
- * take a look at what entries it contains, without making use of the
- * serialization capabilities explained in @ref Eet_Data_Group.
- *
- * The following example will serve as an introduction to most, if not all,
- * of these functions.
- *
- * If you are only using Eet, this is the only header you need to include.
- * @dontinclude eet-file.c
- * @skipline Eet.h
- *
- * Now let's create ourselves an eet file to play with. The following function
- * shows step by step how to open a file and write some data in it.
- * First, we define our file handler and some other things we'll put in it.
- * @line static int
- * @skip Eet_File
- * @until ";
- * @skip eet_open
- *
- * We open a new file in write mode, and if it fails, we just return, since
- * there's not much more we can do about it..
- * @until return
- *
- * Now, we need to write some data in our file. For now, strings will suffice,
- * so let's just dump a bunch of them in there.
- * @until }
- *
- * As you can see, we copied a string into our static buffer, which is a bit
- * bigger than the full length of the string, and then told Eet to write it
- * into the file, compressed, returning the size of the data written into the
- * file.
- * This is all to show that Eet treats data as just data. It doesn't matter
- * what that data represents (for now), it's all just bytes for it. As running
- * the following code will show, we took a string of around 30 bytes and put it
- * in a buffer of 1024 bytes, but the returned size won't be any of those.
- * @until printf
- *
- * Next, we copy into our buffer our set of strings, including their null
- * terminators and write them into the file. No error checking for the sake
- * of brevitiy. And a call to eet_sync() to make sure all out data is
- * properly written down to disk, even though we haven't yet closed the file.
- * @until eet_sync
- *
- * One more write, this time our large array of binary data and... well, I
- * couldn't come up with a valid use of the last set of strings we stored,
- * so let's take it out from the file with eet_delete().
- * @until eet_delete
- *
- * Finally, we close the file, saving any changes back to disk and return.
- * Notice how, if there's any error closing the file or saving its contents,
- * the return value from the function will be a false one, which later on
- * will make the program exit with an error code.
- * @until return
- *
- * Moving onto our main function, we will open the same file and read it back.
- * Trivial, but it'll show how we can do so in more than one way. We'll skip
- * the variable declarations, as they aren't very different from what we've
- * seen already.
- *
- * We start from the beginning by initializing Eet so things in general work.
- * Forgetting to do so will result in weird results or crashes when calling
- * any eet function, so if you experience something like that, the first thing
- * to look at is whether eet_init() is missing.
- * Then we call our @p create_eet_file function, described above, to make
- * sure we have something to work with. If the function fails it will return
- * 0 and we just exit, since nothing from here onwards will work anyway.
- * @skip eet_init
- * @until return
- *
- * Let's take a look now at what entries our file has. For this, we use
- * eet_list(), which will return a list of strings, each being the name of
- * one entry. Since we skipped before, it may be worth noting that @p list
- * is declared as a @p char **.
- * The @p num parameter will, of course, have the number of entries contained
- * in our file.
- * If everything's fine, we'll get our list and print it to the screen, and
- * once done with it, we free the list. That's just the list, not its contents,
- * as they are internal strings used by Eet and trying to free them will surely
- * break things.
- * @until }
- *
- * Reading back plain data is simple. Just a call to eet_read() with the file
- * to read from, and the name of the entry we are interested in. We get back
- * our data and the passed @p size parameter will contain the size of it. If
- * the data was stored compressed, it will decompressed first.
- * @until }
- *
- * Another simple read for the set of strings from before, except those were
- * deleted, so we should get a NULL return and continue normally.
- * @until }
- *
- * Finally, we'll get our binary data in the same way we got the strings. Once
- * again, it makes no difference for Eet what the data is, it's up to us to
- * know how to handle it.
- * @until {
- *
- * Now some cheating, we know that this data is an Eet file because, well...
- * we just know it. So we are going to open it and take a look at its insides.
- * For this, eet_open() won't work, as it needs to have a file on disk to read
- * from and all we have is some data in RAM.
- *
- * So how do we do? One way would be to create a normal file and write down
- * our data, then open it with eet_open(). Another, faster and more efficient
- * if all we want to do is read the file, is to use eet_memopen_read().
- * @until memopen
- *
- * As you can see, the size we got from our previous read was put to good use
- * this time. Unlike the first one where all we had were strings, the size
- * of the data read only serves to demonstrate that we are reading back the
- * entire size of our original @p buf variable.
- *
- * A little peeking to see how many entries the file has and to make an
- * example of eet_num_entries() to get that number when we don't care about
- * their names.
- * @until printf
- *
- * More cheating follows. Just like we knew this was an Eet file, we also know
- * what key to read from, and ontop of that we know that the data in it is not
- * compressed.
- * Knowing all this allows us to take some shortcuts.
- * @until read_direct
- *
- * That's a direct print of our data, whatever that data is. We don't want
- * to worry about having to free it later, so we just used eet_direct_read()
- * to tell Eet to gives a pointer to the internal data in the file, without
- * duplicating it. Since we said that data was not compressed, we shouldn't
- * worry about printing garbage to the screen (and yes, we also know the data
- * is yet another string).
- * We also don't care about the size of the data as it was stored in the file,
- * so we passed NULL as the size parameter.
- * One very important note about this, however, is that we don't care about
- * the size parameter because the data in the file contains the null
- * terminator for the string. So when using Eet to store strings this way,
- * it's very important to consider whether you will keep that final null
- * byte, or to always get the size read and do the necessary checks and copies.
- * It's up to the user and the particular use cases to decide how this will
- * be done.
- *
- * With everything done, close this second file and free the data used to open
- * it. And this is important, we can't free that data until we are done with
- * the file, as Eet is using it. When opening with eet_memopen_read(), the data
- * passed to it must be available for as long as the the file is open.
- * @until }
- *
- * Finally, we close the first file, shutdown all internal resources used by
- * Eet and leave our main function, thus terminating our program.
- * @until return
- *
- * You can look at the full code of the example @ref eet-file.c "here".
- * @{
- */
-
-/**
- * @enum _Eet_File_Mode
- * Modes that a file can be opened.
- */
-typedef enum _Eet_File_Mode
-{
-   EET_FILE_MODE_INVALID = -1,
-   EET_FILE_MODE_READ, /**< File is read-only. */
-   EET_FILE_MODE_WRITE, /**< File is write-only. */
-   EET_FILE_MODE_READ_WRITE /**< File is for both read and write */
-} Eet_File_Mode; /**< Modes that a file can be opened. */
-
-/**
- * @typedef Eet_File
- * Opaque handle that defines an Eet file (or memory).
- *
- * This handle will be returned by the functions eet_open() and
- * eet_memopen_read() and is used by every other function that affects the
- * file in any way. When you are done with it, call eet_close() to clsoe it
- * and, if the file was open for writing, write down to disk any changes made
- * to it.
- *
- * @see eet_open()
- * @see eet_memopen_read()
- * @see eet_close()
- */
-typedef struct _Eet_File Eet_File;
-
-/**
- * @typedef Eet_Dictionary
- * Opaque handle that defines a file-backed (mmaped) dictionary of strings.
- */
-typedef struct _Eet_Dictionary Eet_Dictionary;
-
-/**
- * @}
- */
-
-/**
- * Open an eet file on disk, and returns a handle to it.
- * @param file The file path to the eet file. eg: @c "/tmp/file.eet".
- * @param mode The mode for opening. Either #EET_FILE_MODE_READ,
- *        #EET_FILE_MODE_WRITE or #EET_FILE_MODE_READ_WRITE.
- * @return An opened eet file handle.
- * @ingroup Eet_File_Group
- *
- * This function will open an exiting eet file for reading, and build
- * the directory table in memory and return a handle to the file, if it
- * exists and can be read, and no memory errors occur on the way, otherwise
- * NULL will be returned.
- *
- * It will also open an eet file for writing. This will, if successful,
- * delete the original file and replace it with a new empty file, till
- * the eet file handle is closed or flushed. If it cannot be opened for
- * writing or a memory error occurs, NULL is returned.
- *
- * You can also open the file for read/write. If you then write a key that
- * does not exist it will be created, if the key exists it will be replaced
- * by the new data.
- *
- * If the same file is opened multiple times, then the same file handle will
- * be returned as eet maintains an internal list of all currently open
- * files. Note that it considers files opened for read only and those opened
- * for read/write and write only as 2 separate sets. Those that do not write
- * to the file and those that do. Eet will allow 2 handles to the same file
- * if they are in the 2 separate lists/groups. That means opening a file for
- * read only looks in the read only set, and returns a handle to that file
- * handle and increments its reference count. If you open a file for read/write
- * or write only it looks in the write set and returns a handle after
- * incrementing the reference count. You need to close an eet file handle
- * as many times as it has been opened to maintain correct reference counts.
- * Files whose modified timestamp or size do not match those of the existing
- * referenced file handles will not be returned and a new handle will be
- * returned instead.
- *
- * @since 1.0.0
- */
-EAPI Eet_File *
-eet_open(const char *file,
-         Eet_File_Mode mode);
-
-/**
- * Open an eet file directly from a memory location. The data is not copied,
- * so you must keep it around as long as the eet file is open. There is
- * currently no cache for this kind of Eet_File, so it's reopened every time
- * you use eet_memopen_read.
- * Files opened this way will always be in read-only mode.
- *
- * @since 1.1.0
- * @ingroup Eet_File_Group
- */
-EAPI Eet_File *
-eet_memopen_read(const void *data,
-                 size_t size);
-
-/**
- * Get the mode an Eet_File was opened with.
- * @param ef A valid eet file handle.
- * @return The mode ef was opened with.
- *
- * @since 1.0.0
- * @ingroup Eet_File_Group
- */
-EAPI Eet_File_Mode
-eet_mode_get(Eet_File *ef);
-
-/**
- * Close an eet file handle and flush pending writes.
- * @param ef A valid eet file handle.
- *
- * This function will flush any pending writes to disk if the eet file
- * was opened for write, and free all data associated with the file handle
- * and file, and close the file.
- *
- * If the eet file handle is not valid nothing will be done.
- *
- * @since 1.0.0
- * @ingroup Eet_File_Group
- */
-EAPI Eet_Error
-eet_close(Eet_File *ef);
-
-/**
- * Sync content of an eet file handle, flushing pending writes.
- * @param ef A valid eet file handle.
- *
- * This function will flush any pending writes to disk. The eet file must
- * be opened for write.
- *
- * If the eet file handle is not valid nothing will be done.
- *
- * @since 1.2.4
- * @ingroup Eet_File_Group
- */
-EAPI Eet_Error
-eet_sync(Eet_File *ef);
-
-/**
- * Return a handle to the shared string dictionary of the Eet file
- * @param ef A valid eet file handle.
- * @return A handle to the dictionary of the file
- *
- * This function returns a handle to the dictionary of an Eet file whose
- * handle is @p ef, if a dictionary exists. NULL is returned otherwise or
- * if the file handle is known to be invalid.
- *
- * @see eet_dictionary_string_check() to know if given string came
- *      from the dictionary or it was dynamically allocated using
- *      the #Eet_Data_Descriptor_Class instructrions.
- *
- * @since 1.0.0
- * @ingroup Eet_File_Group
- */
-EAPI Eet_Dictionary *
-eet_dictionary_get(Eet_File *ef);
-
-/**
- * Check if a given string comes from a given dictionary
- * @param ed A valid dictionary handle
- * @param string A valid 0 byte terminated C string
- * @return 1 if it is in the dictionary, 0 otherwise
- *
- * This checks the given dictionary to see if the given string is actually
- * inside that dictionary (i.e. comes from it) and returns 1 if it does.
- * If the dictionary handle is invalid, the string is NULL or the string is
- * not in the dictionary, 0 is returned.
- *
- * @since 1.0.0
- * @ingroup Eet_File_Group
- */
-EAPI int
-eet_dictionary_string_check(Eet_Dictionary *ed,
-                            const char *string);
-
-/**
- * Return the number of strings inside a dictionary
- * @param ed A valid dictionary handle
- * @return the number of strings inside a dictionary
- *
- * @since 1.6.0
- * @ingroup Eet_File_Group
- */
-EAPI int
-eet_dictionary_count(const Eet_Dictionary *ed);
-
-/**
- * Read a specified entry from an eet file and return data
- * @param ef A valid eet file handle opened for reading.
- * @param name Name of the entry. eg: "/base/file_i_want".
- * @param size_ret Number of bytes read from entry and returned.
- * @return The data stored in that entry in the eet file.
- *
- * This function finds an entry in the eet file that is stored under the
- * name specified, and returns that data, decompressed, if successful.
- * NULL is returned if the lookup fails or if memory errors are
- * encountered. It is the job of the calling program to call free() on
- * the returned data. The number of bytes in the returned data chunk are
- * placed in size_ret.
- *
- * If the eet file handle is not valid NULL is returned and size_ret is
- * filled with 0.
- *
- * @see eet_read_cipher()
- *
- * @since 1.0.0
- * @ingroup Eet_File_Group
- */
-EAPI void *
-eet_read(Eet_File *ef,
-         const char *name,
-         int *size_ret);
-
-/**
- * Read a specified entry from an eet file and return data
- * @param ef A valid eet file handle opened for reading.
- * @param name Name of the entry. eg: "/base/file_i_want".
- * @param size_ret Number of bytes read from entry and returned.
- * @return The data stored in that entry in the eet file.
- *
- * This function finds an entry in the eet file that is stored under the
- * name specified, and returns that data if not compressed and successful.
- * NULL is returned if the lookup fails or if memory errors are
- * encountered or if the data is comrpessed. The calling program must never
- * call free() on the returned data. The number of bytes in the returned
- * data chunk are placed in size_ret.
- *
- * If the eet file handle is not valid NULL is returned and size_ret is
- * filled with 0.
- *
- * @since 1.0.0
- * @ingroup Eet_File_Group
- */
-EAPI const void *
-eet_read_direct(Eet_File *ef,
-                const char *name,
-                int *size_ret);
-
-/**
- * Write a specified entry to an eet file handle
- * @param ef A valid eet file handle opened for writing.
- * @param name Name of the entry. eg: "/base/file_i_want".
- * @param data Pointer to the data to be stored.
- * @param size Length in bytes in the data to be stored.
- * @param compress Compression flags (1 == compress, 0 = don't compress).
- * @return bytes written on successful write, 0 on failure.
- *
- * This function will write the specified chunk of data to the eet file
- * and return greater than 0 on success. 0 will be returned on failure.
- *
- * The eet file handle must be a valid file handle for an eet file opened
- * for writing. If it is not, 0 will be returned and no action will be
- * performed.
- *
- * Name, and data must not be NULL, and size must be > 0. If these
- * conditions are not met, 0 will be returned.
- *
- * The data will be copied (and optionally compressed) in ram, pending
- * a flush to disk (it will stay in ram till the eet file handle is
- * closed though).
- *
- * @see eet_write_cipher()
- *
- * @since 1.0.0
- * @ingroup Eet_File_Group
- */
-EAPI int
-eet_write(Eet_File *ef,
-          const char *name,
-          const void *data,
-          int size,
-          int compress);
-
-/**
- * Delete a specified entry from an Eet file being written or re-written
- * @param ef A valid eet file handle opened for writing.
- * @param name Name of the entry. eg: "/base/file_i_want".
- * @return Success or failure of the delete.
- *
- * This function will delete the specified chunk of data from the eet file
- * and return greater than 0 on success. 0 will be returned on failure.
- *
- * The eet file handle must be a valid file handle for an eet file opened
- * for writing. If it is not, 0 will be returned and no action will be
- * performed.
- *
- * Name, must not be NULL, otherwise 0 will be returned.
- *
- * @since 1.0.0
- * @ingroup Eet_File_Group
- */
-EAPI int
-eet_delete(Eet_File *ef,
-           const char *name);
-
-/**
- * Alias a specific section to another one. Destination may exist or not,
- * no checks are done.
- * @param ef A valid eet file handle opened for writing.
- * @param name Name of the new entry. eg: "/base/file_i_want".
- * @param destination Actual source of the aliased entry eg: "/base/the_real_stuff_i_want".
- * @param compress Compression flags (1 == compress, 0 = don't compress).
- * @return EINA_TRUE on success, EINA_FALSE on failure.
- *
- * Name and Destination must not be NULL, otherwise EINA_FALSE will be returned.
- * The equivalent of this would be calling 'ln -s destination name'
- *
- * @since 1.3.3
- * @ingroup Eet_File_Group
- */
-EAPI Eina_Bool
-eet_alias(Eet_File *ef,
-          const char *name,
-          const char *destination,
-          int compress);
-
-/**
- * Retrieve the filename of an Eet_File
- * @param ef A valid eet file handle opened for writing.
- * @return The stringshared file string opened with eet_open(), or NULL on error
- *
- * @note This function will return NULL for files opened with eet_memopen_read()
- *
- * @since 1.6
- * @ingroup Eet_File_Group
- */
-EAPI const char *
-eet_file_get(Eet_File *ef);
-
-/**
- * Retrieve the destination name of an alias
- * @param ef A valid eet file handle opened for writing
- * @param name Name of the entry. eg: "/base/file_i_want"
- * @return Destination of the alias. eg: "/base/the_real_stuff_i_want", NULL on failure
- *
- * Name must not be NULL, otherwise NULL will be returned.
- *
- * @since 1.5
- * @ingroup Eet_File_Group
- */
-EAPI const char *
-eet_alias_get(Eet_File *ef,
-              const char *name);
-
-/**
- * List all entries in eet file matching shell glob.
- * @param ef A valid eet file handle.
- * @param glob A shell glob to match against.
- * @param count_ret Number of entries found to match.
- * @return Pointer to an array of strings.
- *
- * This function will list all entries in the eet file matching the
- * supplied shell glob and return an allocated list of their names, if
- * there are any, and if no memory errors occur.
- *
- * The eet file handle must be valid and glob must not be NULL, or NULL
- * will be returned and count_ret will be filled with 0.
- *
- * The calling program must call free() on the array returned, but NOT
- * on the string pointers in the array. They are taken as read-only
- * internals from the eet file handle. They are only valid as long as
- * the file handle is not closed. When it is closed those pointers in the
- * array are now not valid and should not be used.
- *
- * On success the array returned will have a list of string pointers
- * that are the names of the entries that matched, and count_ret will have
- * the number of entries in this array placed in it.
- *
- * Hint: an easy way to list all entries in an eet file is to use a glob
- * value of "*".
- *
- * @since 1.0.0
- * @ingroup Eet_File_Group
- */
-EAPI char **
-eet_list(Eet_File *ef,
-         const char *glob,
-         int *count_ret);
-
-/**
- * Return the number of entries in the specified eet file.
- * @param ef A valid eet file handle.
- * @return Number of entries in ef or -1 if the number of entries
- *         cannot be read due to open mode restrictions.
- *
- * @since 1.0.0
- * @ingroup Eet_File_Group
- */
-EAPI int
-eet_num_entries(Eet_File *ef);
-
-/**
- * @defgroup Eet_File_Cipher_Group Eet File Ciphered Main Functions
- *
- * Most of the @ref Eet_File_Group have alternative versions that
- * accounts for ciphers to protect their content.
- *
- * @see @ref Eet_Cipher_Group
- *
- * @ingroup Eet_File_Group
- */
-
-/**
- * Read a specified entry from an eet file and return data using a cipher.
- * @param ef A valid eet file handle opened for reading.
- * @param name Name of the entry. eg: "/base/file_i_want".
- * @param size_ret Number of bytes read from entry and returned.
- * @param cipher_key The key to use as cipher.
- * @return The data stored in that entry in the eet file.
- *
- * This function finds an entry in the eet file that is stored under the
- * name specified, and returns that data, decompressed, if successful.
- * NULL is returned if the lookup fails or if memory errors are
- * encountered. It is the job of the calling program to call free() on
- * the returned data. The number of bytes in the returned data chunk are
- * placed in size_ret.
- *
- * If the eet file handle is not valid NULL is returned and size_ret is
- * filled with 0.
- *
- * @see eet_read()
- *
- * @since 1.0.0
- * @ingroup Eet_File_Cipher_Group
- */
-EAPI void *
-eet_read_cipher(Eet_File *ef,
-                const char *name,
-                int *size_ret,
-                const char *cipher_key);
-
-/**
- * Write a specified entry to an eet file handle using a cipher.
- * @param ef A valid eet file handle opened for writing.
- * @param name Name of the entry. eg: "/base/file_i_want".
- * @param data Pointer to the data to be stored.
- * @param size Length in bytes in the data to be stored.
- * @param compress Compression flags (1 == compress, 0 = don't compress).
- * @param cipher_key The key to use as cipher.
- * @return bytes written on successful write, 0 on failure.
- *
- * This function will write the specified chunk of data to the eet file
- * and return greater than 0 on success. 0 will be returned on failure.
- *
- * The eet file handle must be a valid file handle for an eet file opened
- * for writing. If it is not, 0 will be returned and no action will be
- * performed.
- *
- * Name, and data must not be NULL, and size must be > 0. If these
- * conditions are not met, 0 will be returned.
- *
- * The data will be copied (and optionally compressed) in ram, pending
- * a flush to disk (it will stay in ram till the eet file handle is
- * closed though).
- *
- * @see eet_write()
- *
- * @since 1.0.0
- * @ingroup Eet_File_Cipher_Group
- */
-EAPI int
-eet_write_cipher(Eet_File *ef,
-                 const char *name,
-                 const void *data,
-                 int size,
-                 int compress,
-                 const char *cipher_key);
-
-/**
- * @defgroup Eet_File_Image_Group Image Store and Load
- *
- * Eet efficiently stores and loads images, including alpha
- * channels and lossy compressions.
- *
- * Eet can handle both lossy compression with different levels of quality and
- * non-lossy compression with different compression levels. It's also possible,
- * given an image data, to only read its header to get the image information
- * without decoding the entire content for it.
- *
- * The encode family of functions will take an image raw buffer and its
- * parameters and compress it in memory, returning the new buffer.
- * Likewise, the decode functions will read from the given location in memory
- * and return the uncompressed image.
- *
- * The read and write functions will, respectively, encode and decode to or
- * from an Eet file, under the specified key.
- *
- * These functions are fairly low level and the same functionality can be
- * achieved using Evas and Edje, making it much easier to work with images
- * as well as not needing to worry about things like scaling them.
- */
-
-/**
- * Read just the header data for an image and dont decode the pixels.
- * @param ef A valid eet file handle opened for reading.
- * @param name Name of the entry. eg: "/base/file_i_want".
- * @param w A pointer to the unsigned int to hold the width in pixels.
- * @param h A pointer to the unsigned int to hold the height in pixels.
- * @param alpha A pointer to the int to hold the alpha flag.
- * @param compress A pointer to the int to hold the compression amount.
- * @param quality A pointer to the int to hold the quality amount.
- * @param lossy A pointer to the int to hold the lossiness flag.
- * @return 1 on successful decode, 0 otherwise
- *
- * Reads and decodes the image header data stored under the given key and
- * Eet file.
- *
- * The information decoded is placed in each of the parameters, which must be
- * provided. The width and height, measured in pixels, will be stored under
- * the variables pointed by @p w and @p h, respectively. If the read or
- * decode of the header fails, this values will be 0. The @p alpha parameter
- * will be 1 or 0, denoting if the alpha channel of the image is used or not.
- * If the image was losslessly compressed, the @p compress parameter will hold
- * the compression amount used, ranging from 0 to 9 and @p lossy will be 0.
- * In the case of lossy compression, @p lossy will be 1, and the compression
- * quality will be placed under @p quality, with a value ranging from 0 to 100.
- *
- * @see eet_data_image_header_decode()
- * @see eet_data_image_header_read_cipher()
- *
- * @since 1.0.0
- * @ingroup Eet_File_Image_Group
- */
-EAPI int
-eet_data_image_header_read(Eet_File *ef,
-                           const char *name,
-                           unsigned int *w,
-                           unsigned int *h,
-                           int *alpha,
-                           int *compress,
-                           int *quality,
-                           int *lossy);
-
-/**
- * Read image data from the named key in the eet file.
- * @param ef A valid eet file handle opened for reading.
- * @param name Name of the entry. eg: "/base/file_i_want".
- * @param w A pointer to the unsigned int to hold the width in pixels.
- * @param h A pointer to the unsigned int to hold the height in pixels.
- * @param alpha A pointer to the int to hold the alpha flag.
- * @param compress A pointer to the int to hold the compression amount.
- * @param quality A pointer to the int to hold the quality amount.
- * @param lossy A pointer to the int to hold the lossiness flag.
- * @return The image pixel data decoded
- *
- * Reads and decodes the image stored in the given Eet file under the named
- * key.
- *
- * The returned pixel data is a linear array of pixels starting from the
- * top-left of the image, scanning row by row from left to right. Each pile
- * is a 32bit value, with the high byte being the alpha channel, the next being
- * red, then green, and the low byte being blue.
- *
- * The rest of the parameters are the same as in eet_data_image_header_read().
- *
- * On success the function returns a pointer to the image data decoded. The
- * calling application is responsible for calling free() on the image data
- * when it is done with it. On failure NULL is returned and the parameter
- * values may not contain any sensible data.
- *
- * @see eet_data_image_header_read()
- * @see eet_data_image_decode()
- * @see eet_data_image_read_cipher()
- * @see eet_data_image_read_to_surface()
- *
- * @since 1.0.0
- * @ingroup Eet_File_Image_Group
- */
-EAPI void *
-eet_data_image_read(Eet_File *ef,
-                    const char *name,
-                    unsigned int *w,
-                    unsigned int *h,
-                    int *alpha,
-                    int *compress,
-                    int *quality,
-                    int *lossy);
-
-/**
- * Read image data from the named key in the eet file and store it in the given buffer.
- * @param ef A valid eet file handle opened for reading.
- * @param name Name of the entry. eg: "/base/file_i_want".
- * @param src_x The starting x coordinate from where to dump the stream.
- * @param src_y The starting y coordinate from where to dump the stream.
- * @param d A pointer to the pixel surface.
- * @param w The expected width in pixels of the pixel surface to decode.
- * @param h The expected height in pixels of the pixel surface to decode.
- * @param row_stride The length of a pixels line in the destination surface.
- * @param alpha A pointer to the int to hold the alpha flag.
- * @param compress A pointer to the int to hold the compression amount.
- * @param quality A pointer to the int to hold the quality amount.
- * @param lossy A pointer to the int to hold the lossiness flag.
- * @return 1 on success, 0 otherwise.
- *
- * Reads and decodes the image stored in the given Eet file, placing the
- * resulting pixel data in the buffer pointed by the user.
- *
- * Like eet_data_image_read(), it takes the image data stored under the
- * @p name key in the @p ef file, but instead of returning a new buffer with
- * the pixel data, it places the result in the buffer pointed by @p d, which
- * must be provided by the user and of sufficient size to hold the requested
- * portion of the image.
- *
- * The @p src_x and @p src_y parameters indicate the top-left corner of the
- * section of the image to decode. These have to be higher or equal than 0 and
- * less than the respective total width and height of the image. The width
- * and height of the section of the image to decode are given in @p w and @p h
- * and also can't be higher than the total width and height of the image.
- *
- * The @p row_stride parameter indicates the length in bytes of each line in
- * the destination buffer and it has to be at least @p w * 4.
- *
- * All the other parameters are the same as in eet_data_image_read().
- *
- * On success the function returns 1, and 0 on failure. On failure the
- * parameter values may not contain any sensible data.
- *
- * @see eet_data_image_read()
- * @see eet_data_image_decode()
- * @see eet_data_image_decode_to_surface()
- * @see eet_data_image_read_to_surface_cipher()
- *
- * @since 1.0.2
- * @ingroup Eet_File_Image_Group
- */
-EAPI int
-eet_data_image_read_to_surface(Eet_File *ef,
-                               const char *name,
-                               unsigned int src_x,
-                               unsigned int src_y,
-                               unsigned int *d,
-                               unsigned int w,
-                               unsigned int h,
-                               unsigned int row_stride,
-                               int *alpha,
-                               int *compress,
-                               int *quality,
-                               int *lossy);
-
-/**
- * Write image data to the named key in an eet file.
- * @param ef A valid eet file handle opened for writing.
- * @param name Name of the entry. eg: "/base/file_i_want".
- * @param data A pointer to the image pixel data.
- * @param w The width of the image in pixels.
- * @param h The height of the image in pixels.
- * @param alpha The alpha channel flag.
- * @param compress The compression amount.
- * @param quality The quality encoding amount.
- * @param lossy The lossiness flag.
- * @return Success if the data was encoded and written or not.
- *
- * This function takes image pixel data and encodes it in an eet file
- * stored under the supplied name key, and returns how many bytes were
- * actually written to encode the image data.
- *
- * The data expected is the same format as returned by eet_data_image_read.
- * If this is not the case weird things may happen. Width and height must
- * be between 1 and 8000 pixels. The alpha flags can be 0 or 1 (0 meaning
- * the alpha values are not useful and 1 meaning they are). Compress can
- * be from 0 to 9 (0 meaning no compression, 9 meaning full compression).
- * This is only used if the image is not lossily encoded. Quality is used on
- * lossy compression and should be a value from 0 to 100. The lossy flag
- * can be 0 or 1. 0 means encode losslessly and 1 means to encode with
- * image quality loss (but then have a much smaller encoding).
- *
- * On success this function returns the number of bytes that were required
- * to encode the image data, or on failure it returns 0.
- *
- * @see eet_data_image_read()
- * @see eet_data_image_encode()
- * @see eet_data_image_write_cipher()
- *
- * @since 1.0.0
- * @ingroup Eet_File_Image_Group
- */
-EAPI int
-eet_data_image_write(Eet_File *ef,
-                     const char *name,
-                     const void *data,
-                     unsigned int w,
-                     unsigned int h,
-                     int alpha,
-                     int compress,
-                     int quality,
-                     int lossy);
-
-/**
- * Decode Image data header only to get information.
- * @param data The encoded pixel data.
- * @param size The size, in bytes, of the encoded pixel data.
- * @param w A pointer to the unsigned int to hold the width in pixels.
- * @param h A pointer to the unsigned int to hold the height in pixels.
- * @param alpha A pointer to the int to hold the alpha flag.
- * @param compress A pointer to the int to hold the compression amount.
- * @param quality A pointer to the int to hold the quality amount.
- * @param lossy A pointer to the int to hold the lossiness flag.
- * @return 1 on success, 0 on failure.
- *
- * This function works exactly like eet_data_image_header_read(), but instead
- * of reading from an Eet file, it takes the buffer of size @p size pointed
- * by @p data, which must be a valid Eet encoded image.
- *
- * On success the function returns 1 indicating the header was read and
- * decoded properly, or 0 on failure.
- *
- * @see eet_data_image_header_read()
- * @see eet_data_image_header_decode_cipher()
- *
- * @since 1.0.0
- * @ingroup Eet_File_Image_Group
- */
-EAPI int
-eet_data_image_header_decode(const void *data,
-                             int size,
-                             unsigned int *w,
-                             unsigned int *h,
-                             int *alpha,
-                             int *compress,
-                             int *quality,
-                             int *lossy);
-
-/**
- * Decode Image data into pixel data.
- * @param data The encoded pixel data.
- * @param size The size, in bytes, of the encoded pixel data.
- * @param w A pointer to the unsigned int to hold the width in pixels.
- * @param h A pointer to the unsigned int to hold the height in pixels.
- * @param alpha A pointer to the int to hold the alpha flag.
- * @param compress A pointer to the int to hold the compression amount.
- * @param quality A pointer to the int to hold the quality amount.
- * @param lossy A pointer to the int to hold the lossiness flag.
- * @return The image pixel data decoded
- *
- * This function takes encoded pixel data and decodes it into raw RGBA
- * pixels on success.
- *
- * It works exactly like eet_data_image_read(), but it takes the encoded
- * data in the @p data buffer of size @p size, instead of reading from a file.
- * All the others parameters are also the same.
- *
- * On success the function returns a pointer to the image data decoded. The
- * calling application is responsible for calling free() on the image data
- * when it is done with it. On failure NULL is returned and the parameter
- * values may not contain any sensible data.
- *
- * @see eet_data_image_read()
- * @see eet_data_image_decode_cipher()
- *
- * @since 1.0.0
- * @ingroup Eet_File_Image_Group
- */
-EAPI void *
-eet_data_image_decode(const void *data,
-                      int size,
-                      unsigned int *w,
-                      unsigned int *h,
-                      int *alpha,
-                      int *compress,
-                      int *quality,
-                      int *lossy);
-
-/**
- * Decode Image data into pixel data and stores in the given buffer.
- * @param data The encoded pixel data.
- * @param size The size, in bytes, of the encoded pixel data.
- * @param src_x The starting x coordinate from where to dump the stream.
- * @param src_y The starting y coordinate from where to dump the stream.
- * @param d A pointer to the pixel surface.
- * @param w The expected width in pixels of the pixel surface to decode.
- * @param h The expected height in pixels of the pixel surface to decode.
- * @param row_stride The length of a pixels line in the destination surface.
- * @param alpha A pointer to the int to hold the alpha flag.
- * @param compress A pointer to the int to hold the compression amount.
- * @param quality A pointer to the int to hold the quality amount.
- * @param lossy A pointer to the int to hold the lossiness flag.
- * @return 1 on success, 0 otherwise.
- *
- * Like eet_data_image_read_to_surface(), but reading the given @p data buffer
- * instead of a file.
- *
- * On success the function returns 1, and 0 on failure. On failure the
- * parameter values may not contain any sensible data.
- *
- * @see eet_data_image_read_to_surface()
- * @see eet_data_image_decode_to_surface_cipher()
- *
- * @since 1.0.2
- * @ingroup Eet_File_Image_Group
- */
-EAPI int
-eet_data_image_decode_to_surface(const void *data,
-                                 int size,
-                                 unsigned int src_x,
-                                 unsigned int src_y,
-                                 unsigned int *d,
-                                 unsigned int w,
-                                 unsigned int h,
-                                 unsigned int row_stride,
-                                 int *alpha,
-                                 int *compress,
-                                 int *quality,
-                                 int *lossy);
-
-/**
- * Encode image data for storage or transmission.
- * @param data A pointer to the image pixel data.
- * @param size_ret A pointer to an int to hold the size of the returned data.
- * @param w The width of the image in pixels.
- * @param h The height of the image in pixels.
- * @param alpha The alpha channel flag.
- * @param compress The compression amount.
- * @param quality The quality encoding amount.
- * @param lossy The lossiness flag.
- * @return The encoded image data.
- *
- * This function stakes image pixel data and encodes it with compression and
- * possible loss of quality (as a trade off for size) for storage or
- * transmission to another system.
- *
- * It works like eet_data_image_write(), but instead of writing the encoded
- * image into an Eet file, it allocates a new buffer of the size required and
- * returns the encoded data in it.
- *
- * On success this function returns a pointer to the encoded data that you
- * can free with free() when no longer needed.
- *
- * @see eet_data_image_write()
- * @see eet_data_image_read()
- * @see eet_data_image_encode_cipher()
- *
- * @since 1.0.0
- * @ingroup Eet_File_Image_Group
- */
-EAPI void *
-eet_data_image_encode(const void *data,
-                      int *size_ret,
-                      unsigned int w,
-                      unsigned int h,
-                      int alpha,
-                      int compress,
-                      int quality,
-                      int lossy);
-
-/**
- * @defgroup Eet_File_Image_Cipher_Group Image Store and Load using a Cipher
- *
- * Most of the @ref Eet_File_Image_Group have alternative versions
- * that accounts for ciphers to protect their content.
- *
- * @see @ref Eet_Cipher_Group
- *
- * @ingroup Eet_File_Image_Group
- */
-
-/**
- * Read just the header data for an image and dont decode the pixels using a cipher.
- * @param ef A valid eet file handle opened for reading.
- * @param name Name of the entry. eg: "/base/file_i_want".
- * @param cipher_key The key to use as cipher.
- * @param w A pointer to the unsigned int to hold the width in pixels.
- * @param h A pointer to the unsigned int to hold the height in pixels.
- * @param alpha A pointer to the int to hold the alpha flag.
- * @param compress A pointer to the int to hold the compression amount.
- * @param quality A pointer to the int to hold the quality amount.
- * @param lossy A pointer to the int to hold the lossiness flag.
- * @return 1 on successful decode, 0 otherwise
- *
- * This function reads an image from an eet file stored under the named
- * key in the eet file and return a pointer to the decompressed pixel data.
- *
- * The other parameters of the image (width, height etc.) are placed into
- * the values pointed to (they must be supplied). The pixel data is a linear
- * array of pixels starting from the top-left of the image scanning row by
- * row from left to right. Each pixel is a 32bit value, with the high byte
- * being the alpha channel, the next being red, then green, and the low byte
- * being blue. The width and height are measured in pixels and will be
- * greater than 0 when returned. The alpha flag is either 0 or 1. 0 denotes
- * that the alpha channel is not used. 1 denotes that it is significant.
- * Compress is filled with the compression value/amount the image was
- * stored with. The quality value is filled with the quality encoding of
- * the image file (0 - 100). The lossy flags is either 0 or 1 as to if
- * the image was encoded lossily or not.
- *
- * On success the function returns 1 indicating the header was read and
- * decoded properly, or 0 on failure.
- *
- * @see eet_data_image_header_read()
- *
- * @since 1.0.0
- * @ingroup Eet_File_Image_Cipher_Group
- */
-EAPI int
-eet_data_image_header_read_cipher(Eet_File *ef,
-                                  const char *name,
-                                  const char *cipher_key,
-                                  unsigned int *w,
-                                  unsigned int *h,
-                                  int *alpha,
-                                  int *compress,
-                                  int *quality,
-                                  int *lossy);
-
-/**
- * Read image data from the named key in the eet file using a cipher.
- * @param ef A valid eet file handle opened for reading.
- * @param name Name of the entry. eg: "/base/file_i_want".
- * @param cipher_key The key to use as cipher.
- * @param w A pointer to the unsigned int to hold the width in pixels.
- * @param h A pointer to the unsigned int to hold the height in pixels.
- * @param alpha A pointer to the int to hold the alpha flag.
- * @param compress A pointer to the int to hold the compression amount.
- * @param quality A pointer to the int to hold the quality amount.
- * @param lossy A pointer to the int to hold the lossiness flag.
- * @return The image pixel data decoded
- *
- * This function reads an image from an eet file stored under the named
- * key in the eet file and return a pointer to the decompressed pixel data.
- *
- * The other parameters of the image (width, height etc.) are placed into
- * the values pointed to (they must be supplied). The pixel data is a linear
- * array of pixels starting from the top-left of the image scanning row by
- * row from left to right. Each pixel is a 32bit value, with the high byte
- * being the alpha channel, the next being red, then green, and the low byte
- * being blue. The width and height are measured in pixels and will be
- * greater than 0 when returned. The alpha flag is either 0 or 1. 0 denotes
- * that the alpha channel is not used. 1 denotes that it is significant.
- * Compress is filled with the compression value/amount the image was
- * stored with. The quality value is filled with the quality encoding of
- * the image file (0 - 100). The lossy flags is either 0 or 1 as to if
- * the image was encoded lossily or not.
- *
- * On success the function returns a pointer to the image data decoded. The
- * calling application is responsible for calling free() on the image data
- * when it is done with it. On failure NULL is returned and the parameter
- * values may not contain any sensible data.
- *
- * @see eet_data_image_read()
- *
- * @since 1.0.0
- * @ingroup Eet_File_Image_Cipher_Group
- */
-EAPI void *
-eet_data_image_read_cipher(Eet_File *ef,
-                           const char *name,
-                           const char *cipher_key,
-                           unsigned int *w,
-                           unsigned int *h,
-                           int *alpha,
-                           int *compress,
-                           int *quality,
-                           int *lossy);
-
-/**
- * Read image data from the named key in the eet file using a cipher.
- * @param ef A valid eet file handle opened for reading.
- * @param name Name of the entry. eg: "/base/file_i_want".
- * @param cipher_key The key to use as cipher.
- * @param src_x The starting x coordinate from where to dump the stream.
- * @param src_y The starting y coordinate from where to dump the stream.
- * @param d A pointer to the pixel surface.
- * @param w The expected width in pixels of the pixel surface to decode.
- * @param h The expected height in pixels of the pixel surface to decode.
- * @param row_stride The length of a pixels line in the destination surface.
- * @param alpha A pointer to the int to hold the alpha flag.
- * @param compress A pointer to the int to hold the compression amount.
- * @param quality A pointer to the int to hold the quality amount.
- * @param lossy A pointer to the int to hold the lossiness flag.
- * @return 1 on success, 0 otherwise.
- *
- * This function reads an image from an eet file stored under the named
- * key in the eet file and return a pointer to the decompressed pixel data.
- *
- * The other parameters of the image (width, height etc.) are placed into
- * the values pointed to (they must be supplied). The pixel data is a linear
- * array of pixels starting from the top-left of the image scanning row by
- * row from left to right. Each pixel is a 32bit value, with the high byte
- * being the alpha channel, the next being red, then green, and the low byte
- * being blue. The width and height are measured in pixels and will be
- * greater than 0 when returned. The alpha flag is either 0 or 1. 0 denotes
- * that the alpha channel is not used. 1 denotes that it is significant.
- * Compress is filled with the compression value/amount the image was
- * stored with. The quality value is filled with the quality encoding of
- * the image file (0 - 100). The lossy flags is either 0 or 1 as to if
- * the image was encoded lossily or not.
- *
- * On success the function returns 1, and 0 on failure. On failure the
- * parameter values may not contain any sensible data.
- *
- * @see eet_data_image_read_to_surface()
- *
- * @since 1.0.2
- * @ingroup Eet_File_Image_Cipher_Group
- */
-EAPI int
-eet_data_image_read_to_surface_cipher(Eet_File *ef,
-                                      const char *name,
-                                      const char *cipher_key,
-                                      unsigned int src_x,
-                                      unsigned int src_y,
-                                      unsigned int *d,
-                                      unsigned int w,
-                                      unsigned int h,
-                                      unsigned int row_stride,
-                                      int *alpha,
-                                      int *compress,
-                                      int *quality,
-                                      int *lossy);
-
-/**
- * Write image data to the named key in an eet file using a cipher.
- * @param ef A valid eet file handle opened for writing.
- * @param name Name of the entry. eg: "/base/file_i_want".
- * @param cipher_key The key to use as cipher.
- * @param data A pointer to the image pixel data.
- * @param w The width of the image in pixels.
- * @param h The height of the image in pixels.
- * @param alpha The alpha channel flag.
- * @param compress The compression amount.
- * @param quality The quality encoding amount.
- * @param lossy The lossiness flag.
- * @return Success if the data was encoded and written or not.
- *
- * This function takes image pixel data and encodes it in an eet file
- * stored under the supplied name key, and returns how many bytes were
- * actually written to encode the image data.
- *
- * The data expected is the same format as returned by eet_data_image_read.
- * If this is not the case weird things may happen. Width and height must
- * be between 1 and 8000 pixels. The alpha flags can be 0 or 1 (0 meaning
- * the alpha values are not useful and 1 meaning they are). Compress can
- * be from 0 to 9 (0 meaning no compression, 9 meaning full compression).
- * This is only used if the image is not lossily encoded. Quality is used on
- * lossy compression and should be a value from 0 to 100. The lossy flag
- * can be 0 or 1. 0 means encode losslessly and 1 means to encode with
- * image quality loss (but then have a much smaller encoding).
- *
- * On success this function returns the number of bytes that were required
- * to encode the image data, or on failure it returns 0.
- *
- * @see eet_data_image_write()
- *
- * @since 1.0.0
- * @ingroup Eet_File_Image_Cipher_Group
- */
-EAPI int
-eet_data_image_write_cipher(Eet_File *ef,
-                            const char *name,
-                            const char *cipher_key,
-                            const void *data,
-                            unsigned int w,
-                            unsigned int h,
-                            int alpha,
-                            int compress,
-                            int quality,
-                            int lossy);
-
-/**
- * Decode Image data header only to get information using a cipher.
- * @param data The encoded pixel data.
- * @param cipher_key The key to use as cipher.
- * @param size The size, in bytes, of the encoded pixel data.
- * @param w A pointer to the unsigned int to hold the width in pixels.
- * @param h A pointer to the unsigned int to hold the height in pixels.
- * @param alpha A pointer to the int to hold the alpha flag.
- * @param compress A pointer to the int to hold the compression amount.
- * @param quality A pointer to the int to hold the quality amount.
- * @param lossy A pointer to the int to hold the lossiness flag.
- * @return 1 on success, 0 on failure.
- *
- * This function takes encoded pixel data and decodes it into raw RGBA
- * pixels on success.
- *
- * The other parameters of the image (width, height etc.) are placed into
- * the values pointed to (they must be supplied). The pixel data is a linear
- * array of pixels starting from the top-left of the image scanning row by
- * row from left to right. Each pixel is a 32bit value, with the high byte
- * being the alpha channel, the next being red, then green, and the low byte
- * being blue. The width and height are measured in pixels and will be
- * greater than 0 when returned. The alpha flag is either 0 or 1. 0 denotes
- * that the alpha channel is not used. 1 denotes that it is significant.
- * Compress is filled with the compression value/amount the image was
- * stored with. The quality value is filled with the quality encoding of
- * the image file (0 - 100). The lossy flags is either 0 or 1 as to if
- * the image was encoded lossily or not.
- *
- * On success the function returns 1 indicating the header was read and
- * decoded properly, or 0 on failure.
- *
- * @see eet_data_image_header_decode()
- *
- * @since 1.0.0
- * @ingroup Eet_File_Image_Cipher_Group
- */
-EAPI int
-eet_data_image_header_decode_cipher(const void *data,
-                                    const char *cipher_key,
-                                    int size,
-                                    unsigned int *w,
-                                    unsigned int *h,
-                                    int *alpha,
-                                    int *compress,
-                                    int *quality,
-                                    int *lossy);
-
-/**
- * Decode Image data into pixel data using a cipher.
- * @param data The encoded pixel data.
- * @param cipher_key The key to use as cipher.
- * @param size The size, in bytes, of the encoded pixel data.
- * @param w A pointer to the unsigned int to hold the width in pixels.
- * @param h A pointer to the unsigned int to hold the height in pixels.
- * @param alpha A pointer to the int to hold the alpha flag.
- * @param compress A pointer to the int to hold the compression amount.
- * @param quality A pointer to the int to hold the quality amount.
- * @param lossy A pointer to the int to hold the lossiness flag.
- * @return The image pixel data decoded
- *
- * This function takes encoded pixel data and decodes it into raw RGBA
- * pixels on success.
- *
- * The other parameters of the image (width, height etc.) are placed into
- * the values pointed to (they must be supplied). The pixel data is a linear
- * array of pixels starting from the top-left of the image scanning row by
- * row from left to right. Each pixel is a 32bit value, with the high byte
- * being the alpha channel, the next being red, then green, and the low byte
- * being blue. The width and height are measured in pixels and will be
- * greater than 0 when returned. The alpha flag is either 0 or 1. 0 denotes
- * that the alpha channel is not used. 1 denotes that it is significant.
- * Compress is filled with the compression value/amount the image was
- * stored with. The quality value is filled with the quality encoding of
- * the image file (0 - 100). The lossy flags is either 0 or 1 as to if
- * the image was encoded lossily or not.
- *
- * On success the function returns a pointer to the image data decoded. The
- * calling application is responsible for calling free() on the image data
- * when it is done with it. On failure NULL is returned and the parameter
- * values may not contain any sensible data.
- *
- * @see eet_data_image_decode()
- *
- * @since 1.0.0
- * @ingroup Eet_File_Image_Cipher_Group
- */
-EAPI void *
-eet_data_image_decode_cipher(const void *data,
-                             const char *cipher_key,
-                             int size,
-                             unsigned int *w,
-                             unsigned int *h,
-                             int *alpha,
-                             int *compress,
-                             int *quality,
-                             int *lossy);
-
-/**
- * Decode Image data into pixel data using a cipher.
- * @param data The encoded pixel data.
- * @param cipher_key The key to use as cipher.
- * @param size The size, in bytes, of the encoded pixel data.
- * @param src_x The starting x coordinate from where to dump the stream.
- * @param src_y The starting y coordinate from where to dump the stream.
- * @param d A pointer to the pixel surface.
- * @param w The expected width in pixels of the pixel surface to decode.
- * @param h The expected height in pixels of the pixel surface to decode.
- * @param row_stride The length of a pixels line in the destination surface.
- * @param alpha A pointer to the int to hold the alpha flag.
- * @param compress A pointer to the int to hold the compression amount.
- * @param quality A pointer to the int to hold the quality amount.
- * @param lossy A pointer to the int to hold the lossiness flag.
- * @return 1 on success, 0 otherwise.
- *
- * This function takes encoded pixel data and decodes it into raw RGBA
- * pixels on success.
- *
- * The other parameters of the image (alpha, compress etc.) are placed into
- * the values pointed to (they must be supplied). The pixel data is a linear
- * array of pixels starting from the top-left of the image scanning row by
- * row from left to right. Each pixel is a 32bit value, with the high byte
- * being the alpha channel, the next being red, then green, and the low byte
- * being blue. The width and height are measured in pixels and will be
- * greater than 0 when returned. The alpha flag is either 0 or 1. 0 denotes
- * that the alpha channel is not used. 1 denotes that it is significant.
- * Compress is filled with the compression value/amount the image was
- * stored with. The quality value is filled with the quality encoding of
- * the image file (0 - 100). The lossy flags is either 0 or 1 as to if
- * the image was encoded lossily or not.
- *
- * On success the function returns 1, and 0 on failure. On failure the
- * parameter values may not contain any sensible data.
- *
- * @see eet_data_image_decode_to_surface()
- *
- * @since 1.0.2
- * @ingroup Eet_File_Image_Cipher_Group
- */
-EAPI int
-eet_data_image_decode_to_surface_cipher(const void *data,
-                                        const char *cipher_key,
-                                        int size,
-                                        unsigned int src_x,
-                                        unsigned int src_y,
-                                        unsigned int *d,
-                                        unsigned int w,
-                                        unsigned int h,
-                                        unsigned int row_stride,
-                                        int *alpha,
-                                        int *compress,
-                                        int *quality,
-                                        int *lossy);
-
-/**
- * Encode image data for storage or transmission using a cipher.
- * @param data A pointer to the image pixel data.
- * @param cipher_key The key to use as cipher.
- * @param size_ret A pointer to an int to hold the size of the returned data.
- * @param w The width of the image in pixels.
- * @param h The height of the image in pixels.
- * @param alpha The alpha channel flag.
- * @param compress The compression amount.
- * @param quality The quality encoding amount.
- * @param lossy The lossiness flag.
- * @return The encoded image data.
- *
- * This function stakes image pixel data and encodes it with compression and
- * possible loss of quality (as a trade off for size) for storage or
- * transmission to another system.
- *
- * The data expected is the same format as returned by eet_data_image_read.
- * If this is not the case weird things may happen. Width and height must
- * be between 1 and 8000 pixels. The alpha flags can be 0 or 1 (0 meaning
- * the alpha values are not useful and 1 meaning they are). Compress can
- * be from 0 to 9 (0 meaning no compression, 9 meaning full compression).
- * This is only used if the image is not lossily encoded. Quality is used on
- * lossy compression and should be a value from 0 to 100. The lossy flag
- * can be 0 or 1. 0 means encode losslessly and 1 means to encode with
- * image quality loss (but then have a much smaller encoding).
- *
- * On success this function returns a pointer to the encoded data that you
- * can free with free() when no longer needed.
- *
- * @see eet_data_image_encode()
- *
- * @since 1.0.0
- * @ingroup Eet_File_Image_Cipher_Group
- */
-EAPI void *
-eet_data_image_encode_cipher(const void *data,
-                             const char *cipher_key,
-                             unsigned int w,
-                             unsigned int h,
-                             int alpha,
-                             int compress,
-                             int quality,
-                             int lossy,
-                             int *size_ret);
-
-/**
- * @defgroup Eet_Cipher_Group Cipher, Identity and Protection Mechanisms
- *
- * Eet allows one to protect entries of an #Eet_File
- * individually. This may be used to ensure data was not tampered or
- * that third party does not read your data.
- *
- * @see @ref Eet_File_Cipher_Group
- * @see @ref Eet_File_Image_Cipher_Group
- *
- * @{
- */
-
-/**
- * @typedef Eet_Key
- * Opaque handle that defines an identity (also known as key)
- * in Eet's cipher system.
- */
-typedef struct _Eet_Key Eet_Key;
-
-/**
- * @}
- */
-
-/**
- * Callback used to request if needed the password of a private key.
- *
- * @param buffer the buffer where to store the password.
- * @param size the maximum password size (size of buffer, including '@\0').
- * @param rwflag if the buffer is also readable or just writable.
- * @param data currently unused, may contain some context in future.
- * @return 1 on success and password was set to @p buffer, 0 on failure.
- *
- * @since 1.2.0
- * @ingroup Eet_Cipher_Group
- */
-typedef int (*Eet_Key_Password_Callback)(char *buffer, int size, int rwflag, void *data);
-
-/**
- * Create an Eet_Key needed for signing an eet file.
- *
- * The certificate should provide the public that match the private key.
- * No verification is done to ensure that.
- *
- * @param certificate_file The file where to find the certificate.
- * @param private_key_file The file that contains the private key.
- * @param cb Function to callback if password is required to unlock
- *        private key.
- * @return A key handle to use, or @c NULL on failure.
- *
- * @see eet_identity_close()
- *
- * @since 1.2.0
- * @ingroup Eet_Cipher_Group
- */
-EAPI Eet_Key *
-eet_identity_open(const char *certificate_file,
-                  const char *private_key_file,
-                  Eet_Key_Password_Callback cb);
-
-/**
- * Close and release all ressource used by an Eet_Key.  An
- * reference counter prevent it from being freed until all file
- * using it are also closed.
- *
- * @param key the key handle to close and free resources.
- *
- * @since 1.2.0
- * @ingroup Eet_Cipher_Group
- */
-EAPI void
-eet_identity_close(Eet_Key *key);
-
-/**
- * Set a key to sign a file
- *
- * @param ef the file to set the identity.
- * @param key the key handle to set as identity.
- * @return #EET_ERROR_BAD_OBJECT if @p ef is invalid or
- *         #EET_ERROR_NONE on success.
- *
- * @since 1.2.0
- * @ingroup Eet_Cipher_Group
- */
-EAPI Eet_Error
-eet_identity_set(Eet_File *ef,
-                 Eet_Key *key);
-
-/**
- * Display both private and public key of an Eet_Key.
- *
- * @param key the handle to print.
- * @param out where to print.
- *
- * @since 1.2.0
- * @ingroup Eet_Cipher_Group
- */
-EAPI void
-eet_identity_print(Eet_Key *key,
-                   FILE *out);
-
-/**
- * Get the x509 der certificate associated with an Eet_File. Will return NULL
- * if the file is not signed.
- *
- * @param ef The file handle to query.
- * @param der_length The length of returned data, may be @c NULL.
- * @return the x509 certificate or @c NULL on error.
- *
- * @since 1.2.0
- * @ingroup Eet_Cipher_Group
- */
-EAPI const void *
-eet_identity_x509(Eet_File *ef,
-                  int *der_length);
-
-/**
- * Get the raw signature associated with an Eet_File. Will return NULL
- * if the file is not signed.
- *
- * @param ef The file handle to query.
- * @param signature_length The length of returned data, may be @c NULL.
- * @return the raw signature or @c NULL on error.
- *
- * @ingroup Eet_Cipher_Group
- */
-EAPI const void *
-eet_identity_signature(Eet_File *ef,
-                       int *signature_length);
-
-/**
- * Get the SHA1 associated with a file. Could be the one used to
- * sign the data or if the data where not signed, it will be the
- * SHA1 of the file.
- *
- * @param ef The file handle to query.
- * @param sha1_length The length of returned data, may be @c NULL.
- * @return the associated SHA1 or @c NULL on error.
- *
- * @since 1.2.0
- * @ingroup Eet_Cipher_Group
- */
-EAPI const void *
-eet_identity_sha1(Eet_File *ef,
-                  int *sha1_length);
-
-/**
- * Display the x509 der certificate to out.
- *
- * @param certificate the x509 certificate to print
- * @param der_length The length the certificate.
- * @param out where to print.
- *
- * @since 1.2.0
- * @ingroup Eet_Cipher_Group
- */
-EAPI void
-eet_identity_certificate_print(const unsigned char *certificate,
-                               int der_length,
-                               FILE *out);
-
-/**
- * @defgroup Eet_Data_Group Eet Data Serialization
- *
- * Convenience functions to serialize and parse complex data
- * structures to binary blobs.
- *
- * While Eet core just handles binary blobs, it is often required
- * to save some structured data of different types, such as
- * strings, integers, lists, hashes and so on.
- *
- * Eet can serialize and then parse data types given some
- * construction instructions. These are defined in two levels:
- *
- * - #Eet_Data_Descriptor_Class to tell generic memory handling,
- *   such as the size of the type, how to allocate memory, strings,
- *   lists, hashes and so on.
- *
- * - #Eet_Data_Descriptor to tell inside such type, the members and
- *   their offsets inside the memory blob, their types and
- *   names. These members can be simple types or other
- *   #Eet_Data_Descriptor, allowing hierarchical types to be
- *   defined.
- *
- * Given that C provides no introspection, this process can be
- * quite cumbersome, so we provide lots of macros and convenience
- * functions to aid creating the types.
- *
- * We make now a quick overview of some of the most commonly used elements
- * of this part of the library. A simple example of a configuration system
- * will work as a somewhat real life example that is still simple enough to
- * follow.
- * Only the relevant sections will be shown here, but you can get the full
- * code @ref eet-data-simple.c "here".
- *
- * Ignoring the included headers, we'll begin by defining our configuration
- * struct.
- * @dontinclude eet-data-simple.c
- * @skip typedef
- * @until }
- *
- * When using Eet, you don't think in matters of what data the program needs
- * to run and which you would like to store. It's all the same and if it makes
- * more sense to keep them together, it's perfectly fine to do so. At the time
- * of telling Eet how your data is comprised you can leave out the things
- * that are runtime only and let Eet take care of the rest for you.
- *
- * The key used to store the config follows, as well as the variable used to
- * store our data descriptor.
- * This last one is very important. It's the one thing that Eet will use to
- * identify your data, both at the time of writing it to the file and when
- * loading from it.
- * @skipline MY_CONF
- * @skipline Eet_Data_Descriptor
- *
- * Now we'll see how to create this descriptor, so Eet knows how to handle
- * our data later on.
- * Begin our function by declaring an Eet_Data_Descriptor_Class, which is
- * used to create the actual descriptor. This class contains the name of
- * our data type, its size and several functions that dictate how Eet should
- * handle memory to allocate the necessary bits to bring our data to life.
- * You, as a user, will very hardly set this class' contents directly. The
- * most common scenario is to use one of the provided macros that set it using
- * the Eina data types, so that's what we'll be doing across all our examples.
- * @skip static void
- * @until eet_data_descriptor_stream_new
- *
- * Now that we have our descriptor, we need to make it describe something.
- * We do so by telling it which members of our struct we want it to know about
- * and their types.
- * The eet_data_descriptor_element_add() function takes care of this, but it's
- * too cumbersome for normal use, so several macros are provided that make
- * it easier to handle. Even with them, however, code can get very repetitive
- * and it's not uncommon to define custom macros using them to save on typing.
- * @skip #define
- * @until }
- *
- * Now our descriptor knows about the parts of our structure that we are
- * interesting in saving. You can see that not all of them are there, yet Eet
- * will find those that need saving and do the right thing. When loading our
- * data, any non-described fields in the structure will be zeroed, so there's
- * no need to worry about garbage memory in them.
- * Refer to the documentation of #EET_DATA_DESCRIPTOR_ADD_BASIC to understand
- * what our macro does.
- *
- * We are done with our descriptor init function and it's proper to have the
- * relevant shutdown. Proper coding guidelines indiciate that all memory
- * allocated should be freed when the program ends, and since you will most
- * likely keep your descriptor around for the life or your application, it's
- * only right to free it at the end.
- * @skip static void
- * @until }
- *
- * Not listed here, but included in the full example are functions to create
- * a blank configuration and free it. The first one will only be used when
- * no file exists to load from, or nothing is found in it, but the latter is
- * used regardless of where our data comes from. Unless you are reading direct
- * data from the Eet file, you will be in charge of freeing anything loaded
- * from it.
- *
- * Now it's time to look at how we can load our config from some file.
- * Begin by opening the Eet file normally.
- * @skip static My_Conf_Type
- * @until }
- *
- * And now we need to read the data from the file and decode it using our
- * descriptor. Fortunately, that's all done in one single step.
- * @until goto
- *
- * And that's it for all Eet cares about. But since we are dealing with a
- * common case, as is save and load of user configurations, the next fragment
- * of code shows why we have a version field in our struct, and how you can
- * use it to load older configuration files and update them as needed.
- * @until }
- *
- * Finally, clsoe the file and return the newly loaded config data.
- * @until }
- *
- * Saving data is just as easy. The full version of the following function
- * includes code to save to a temporary file first, so you can be sure not
- * to lose all your data in the case of a failure mid-writing. You can look
- * at it @ref eet-data-simple.c "here".
- * @skip static Eina_Bool
- * @until {
- * @skipline Eina_Bool ret
- * @skip eet_open
- * @until eet_close
- * @skip return
- * @until }
- *
- * To close, our main function, which doesn't do much. Just take some arguments
- * from the command line with the name of the file to load and another one
- * where to save again. If input file doesn't exist, a new config structure
- * will be created and saved to our output file.
- * @skip int main
- * @until return ret
- * @until }
- *
- * The following is a list of more advanced and detailed examples.
- * @li @ref eet_data_nested_example
- * @li @ref eet_data_file_descriptor
- * @li @ref Example_Eet_Data_File_Descriptor_02
- * @li @ref Example_Eet_Data_Cipher_Decipher
- */
-
-/**
- * @page eet_data_nested_example Nested structures and Eet Data Descriptors
- *
- * We've seen already a simple example of how to use Eet Data Descriptors
- * to handle our structures, but it didn't show how this works when you
- * have structures inside other structures.
- *
- * Now, there's a very simple case of this, for when you have inline structs
- * to keep your big structure more organized, you don't need anything else
- * besides what @ref eet-data-simple.c "this simple example does".
- * Just use something like @p some_struct.sub_struct.member when adding the
- * member to the descriptor and it will work.
- *
- * For example:
- * @code
- * typedef struct
- * {
- *    int a_number;
- *    char *a_string;
- *    struct {
- *       int other_num;
- *       int one_more;
- *    } sub;
- * } some_struct;
- *
- * void some_function()
- * {
- *    ...
- *    my_desc = eet_data_descriptor_stream_new(&eddc);
- *    EET_DATA_DESCRIPTOR_ADD_BASIC(my_desc, some_struct, "a_number",
- *                                  a_number, EET_T_INT);
- *    EET_DATA_DESCRIPTOR_ADD_BASIC(my_desc, some_struct, "a_string",
- *                                  a_string, EET_T_STRING);
- *    EET_DATA_DESCRIPTOR_ADD_BASIC(my_desc, some_struct, "sub.other_num",
- *                                  sub.other_num, EET_T_INT);
- *    EET_DATA_DESCRIPTOR_ADD_BASIC(my_desc, some_struct, "sub.one_more",
- *                                  sub.one_more", EET_T_INT);
- *    ...
- * }
- * @endcode
- *
- * But this is not what we are here for today. When we talk about nested
- * structures, what we really want are things like lists and hashes to be
- * taken into consideration automatically, and all their contents saved and
- * loaded just like ordinary integers and strings are.
- *
- * And of course, Eet can do that, and considering the work it saves you as a
- * programmer, we could say it's even easier to do than handling just integers.
- *
- * Let's begin with our example then, which is not all too different from the
- * simple one introduced earlier.
- *
- * We won't ignore the headers this time to show how easy it is to use Eina
- * data types with Eet, but we'll still skip most of the code that is not
- * pertinent to what we want to show now, but as usual, you can get it full
- * by follwing @ref eet-data-nested.c "this link".
- *
- * @dontinclude eet-data-nested.c
- * @skipline Eina.h
- * @skipline Eet.h
- * @skip typedef struct
- * @until } My_Conf_Subtype
- *
- * Extremely similar to our previous example. Just a new struct in there, and
- * a pointer to a list in the one we already had. Handling a list of subtypes
- * is easy on our program, but now we'll see what Eet needs to work with them
- * (Hint: it's easy too).
- * @skip _my_conf_descriptor
- * @until _my_conf_sub_descriptor
- *
- * Since we have two structures now, it's only natural that we'll need two
- * descriptors. One for each, which will be defined exactly as before.
- * @skip static void
- * @until eddc
- * @skip EET_EINA_STREAM_DATA_DESCRIPTOR_CLASS_SET
- * @until _my_conf_sub_descriptor
- *
- * We create our descriptors, each for one type, and as before, we are going to
- * use a simple macro to set their contents, to save on typing.
- * @skip #define
- * @until EET_T_UCHAR
- *
- * So far, nothing new. We have our descriptors and we know already how to
- * save them separately. But what we want is to link them together, and even
- * more so, we want our main type to hold a list of more than one of the new
- * sub type. So how do we do that?
- *
- * Simple enough, we tell Eet that our main descriptor will hold a list, of
- * which each node will point to some type described by our new descriptor.
- * @skip EET_DATA_DESCRIPTOR_ADD_LIST
- * @until _my_conf_sub_descriptor
- *
- * And that's all. We are closing the function now so as to not leave dangling
- * curly braces, but there's nothing more to show in this example. Only other
- * additions are the necessary code to free our new data, but you can see it
- * in the full code listing.
- * @until }
- */
-
-/**
- * @page eet_data_file_descriptor Advanced use of Eet Data Descriptors
- *
- * A real life example is usually the best way to see how things are used,
- * but they also involve a lot more code than what needs to be shown, so
- * instead of going that way, we'll be borrowing some pieces from one in
- * the following example. It's been slightly modified from the original
- * source to show more of the varied ways in which Eet can handle our data.
- *
- * @ref eet-data-file_descriptor_01.c "This example" shows a cache of user
- * accounts and messages received, and it's a bit more interactive than
- * previous examples.
- *
- * Let's begin by looking at the structures we'll be using. First we have
- * one to define the messages the user receives and one for the one he posts.
- * Straight forward and nothing new here.
- * @dontinclude eet-data-file_descriptor_01.c
- * @skip typedef
- * @until My_Post
- *
- * One more to declare the account itself. This one will contain a list of
- * all messages received, and the posts we make ourselves will be kept in an
- * array. No special reason other than to show how to use arrays with Eet.
- * @until My_Account
- *
- * Finally, the main structure to hold our cache of accounts. We'll be looking
- * for these accounts by their names, so let's keep them in a hash, using
- * that name as the key.
- * @until My_Cache
- *
- * As explained before, we need one descriptor for each struct we want Eet
- * to handle, but this time we also want to keep around our Eet file and its
- * string dictionary. You will see why in a moment.
- * @skip Eet_Data_Descriptor
- * @until _my_post_descriptor
- * @skip Eet_File
- * @until Eet_Dictionary
- *
- * The differences begin now. They aren't much, but we'll be creating our
- * descriptors differently. Things can be added to our cache, but we won't
- * be modifying the current contents, so we can consider the data read from
- * it to be read-only, and thus allow Eet to save time and memory by not
- * duplicating thins unnecessary.
- * @skip static void
- * @until _my_post_descriptor
- *
- * As the comment in the code explains, we are asking Eet to give us strings
- * directly from the mapped file, which avoids having to load it in memory
- * and data duplication.
- * Of course, there are things to take into account when doing things this
- * way, and they will be mentioned as we encounter those special cases.
- *
- * Next comes the actual description of our data, just like we did in the
- * previous examples.
- * @skip #define
- * @until #undef
- * @until #define
- * @until #undef
- *
- * And the account struct's description doesn't add much new, but it's worth
- * commenting on it.
- * @skip #define
- * @until _my_post_descriptor
- *
- * How to add a list we've seen before, but now we are also adding an array.
- * There's nothing really special about it, but it's important to note that
- * the EET_DATA_DESCRIPTOR_ADD_VAR_ARRAY is used to add arrays of variable
- * length to a descriptor. That is, arrays just like the one we defined.
- * Since there's no way in C to know how long they are, we need to keep
- * track of the count ourselves and Eet needs to know how to do so as well.
- * That's what the @p posts_count member of our struct is for. When adding
- * our array member, this macro will look for another variable in the struct
- * named just like the array, but with @p _count attached to the end.
- * When saving our data, Eet will know how many elements the array contains
- * by looking into this count variable. When loading back from a file, this
- * variable will be set to the right number of elements.
- *
- * Another option for arrays is to use EET_DATA_DESCRIPTOR_ADD_ARRAY, which
- * takes care of fixed sized arrays.
- * For example, let's suppose that we want to keep track of only the last
- * ten posts the user sent, and we declare our account struct as follows
- * @code
- * typedef struct
- * {
- *    unsigned int id;
- *    const char  *name;
- *    Eina_List   *messages;
- *    My_Post      posts[10];
- * } My_Account;
- * @endcode
- * Then we would add the array to our descriptor with
- * @code
- * EET_DATA_DESCRIPTOR_ADD_ARRAY(_my_account_descriptor, My_Account, "posts",
- *                               posts, _my_post_descriptor);
- * @endcode
- *
- * Notice how this time we don't have a @p posts_count variable in our struct.
- * We could have it for the program to keep track of how many posts the
- * array actually contains, but Eet no longer needs it. Being defined that
- * way the array is already taking up all the memory needed for the ten
- * elements, and it is possible in C to determine how much it is in code.
- * When saving our data, Eet will just dump the entire memory blob into the
- * file, regardless of how much of it is really used. So it's important to
- * take into consideration this kind of things when defining your data types.
- * Each has its uses, its advantages and disadvantages and it's up to you
- * to decide which to use.
- *
- * Now, going back to our example, we have to finish adding our data to the
- * descriptors. We are only missing the main one for the cache, which
- * contains our hash of accounts.
- * Unless you are using your own hash functions when setting the descriptor
- * class, always use hashes with string type keys.
- * @skip #define
- * @until }
- *
- * If you remember, we told Eet not to duplicate memory when possible at the
- * time of loading back our data. But this doesn't mean everything will be
- * loaded straight from disk and we don't have to worry about freeing it.
- * Data in the Eet file is compressed and encoded, so it still needs to be
- * decoded and memory will be allocated to convert it back into something we
- * can use. We also need to take care of anything we add in the current
- * instance of the program.
- * To summarize, any string we get from Eet is likely to be a pointer to the
- * internal dictionary, and trying to free it will, in the best case, crash
- * our application right away.
- *
- * So how do we know if we have to free a string? We check if it's part of
- * the dictionary, and if it's not there we can be sure it's safe to get
- * rid of it.
- * @skip static void
- * @skip }
- * @skip static void
- * @until }
- *
- * See how this is used when adding a new message to our cache.
- * @skip static My_Message
- * @until return msg
- * @until free(msg)
- * @until }
- *
- * Skipping all the utility functions used by our program (remember you can
- * look at the full example @ref eet-data-file_descriptor_01.c "here") we get to
- * our cache loading code. Nothing out of the ordinary at first, just the
- * same old open file, read data using our main descriptor to decode it
- * into something we can use and check version of loaded data and if it doesn't
- * match, do something accordingly.
- * @skip static My_Cache
- * @until }
- * @until }
- * @until }
- *
- * Then comes the interesting part. Remember how we kept two more global
- * variables with our descriptors? One of them we already used to check if
- * it was right to free a string or not, but we didn't know where it came from.
- * Loading our data straight from the mmapped file means that we can't close
- * it until we are done using it, so we need to keep its handler around until
- * then. It also means that any changes done to the file can, and will,
- * invalidate all our pointers to the file backed data, so if we add something
- * and save the file, we need to reload our cache.
- *
- * Thus our load function checks if we had an open file, if there is it gets
- * closed and our variable is updated to the new handler. Then we get the
- * string dictionary we use to check if a string is part of it or not.
- * Updating any references to the cache data is up you as a programmer to
- * handle properly, there's nothing Eet can do in this situation.
- * @until }
- *
- * The save function doesn't have anything new, and all that's left after it
- * is the main program, which doesn't really have anything of interest within
- * the scope of what we are learning.
- */
-
-/**
- * @addtogroup Eet_Data_Group
- * @{
- */
-#define EET_T_UNKNOW         0 /**< Unknown data encoding type */
-#define EET_T_CHAR           1 /**< Data type: char */
-#define EET_T_SHORT          2 /**< Data type: short */
-#define EET_T_INT            3 /**< Data type: int */
-#define EET_T_LONG_LONG      4 /**< Data type: long long */
-#define EET_T_FLOAT          5 /**< Data type: float */
-#define EET_T_DOUBLE         6 /**< Data type: double */
-#define EET_T_UCHAR          7 /**< Data type: unsigned char */
-#define EET_T_USHORT         8 /**< Data type: unsigned short */
-#define EET_T_UINT           9 /**< Data type: unsigned int */
-#define EET_T_ULONG_LONG     10 /**< Data type: unsigned long long */
-#define EET_T_STRING         11 /**< Data type: char * */
-#define EET_T_INLINED_STRING 12 /**< Data type: char * (but compressed inside the resulting eet) */
-#define EET_T_NULL           13 /**< Data type: (void *) (only use it if you know why) */
-#define EET_T_F32P32         14 /**< Data type: fixed point 32.32 */
-#define EET_T_F16P16         15 /**< Data type: fixed point 16.16 */
-#define EET_T_F8P24          16 /**< Data type: fixed point 8.24 */
-#define EET_T_LAST           18 /**< Last data type */
-
-#define EET_G_UNKNOWN        100 /**< Unknown group data encoding type */
-#define EET_G_ARRAY          101 /**< Fixed size array group type */
-#define EET_G_VAR_ARRAY      102 /**< Variable size array group type */
-#define EET_G_LIST           103 /**< Linked list group type */
-#define EET_G_HASH           104 /**< Hash table group type */
-#define EET_G_UNION          105 /**< Union group type */
-#define EET_G_VARIANT        106 /**< Selectable subtype group */
-#define EET_G_LAST           107 /**< Last group type */
-
-#define EET_I_LIMIT          128 /**< Other type exist but are reserved for internal purpose. */
-
-/**
- * @typedef Eet_Data_Descriptor
- *
- * Opaque handle that have information on a type members.
- *
- * Descriptors are created using an #Eet_Data_Descriptor_Class, and they
- * describe the contents of the structure that will be serialized by Eet.
- * Not all members need be described by it, just those that should be handled
- * by Eet. This way it's possible to have one structure with both data to be
- * saved to a file, like application configuration, and runtime information
- * that would be meaningless to store, but is appropriate to keep together
- * during the program execution.
- * The members are added by means of
- * EET_DATA_DESCRIPTOR_ADD_BASIC(), EET_DATA_DESCRIPTOR_ADD_SUB(),
- * EET_DATA_DESCRIPTOR_ADD_LIST(), EET_DATA_DESCRIPTOR_ADD_HASH()
- * or eet_data_descriptor_element_add().
- *
- * @see eet_data_descriptor_stream_new()
- * @see eet_data_descriptor_file_new()
- * @see eet_data_descriptor_free()
- */
-typedef struct _Eet_Data_Descriptor Eet_Data_Descriptor;
-
-/**
- * @def EET_DATA_DESCRIPTOR_CLASS_VERSION
- * The version of #Eet_Data_Descriptor_Class at the time of the
- * distribution of the sources. One should define this to its
- * version member so it is compatible with abi changes, or at least
- * will not crash with them.
- */
-#define EET_DATA_DESCRIPTOR_CLASS_VERSION 4
-
-/**
- * @typedef Eet_Data_Descriptor_Class
- *
- * Instructs Eet about memory management for different needs under
- * serialization and parse process.
- */
-typedef struct _Eet_Data_Descriptor_Class Eet_Data_Descriptor_Class;
-
-typedef int                             (*Eet_Descriptor_Hash_Foreach_Callback_Callback)(void *h, const char *k, void *dt, void *fdt);
-
-typedef void *                          (*Eet_Descriptor_Mem_Alloc_Callback)(size_t size);
-typedef void                            (*Eet_Descriptor_Mem_Free_Callback)(void *mem);
-typedef char *                          (*Eet_Descriptor_Str_Alloc_Callback)(const char *str);
-typedef void                            (*Eet_Descriptor_Str_Free_Callback)(const char *str);
-typedef void *                          (*Eet_Descriptor_List_Next_Callback)(void *l);
-typedef void *                          (*Eet_Descriptor_List_Append_Callback)(void *l, void *d);
-typedef void *                          (*Eet_Descriptor_List_Data_Callback)(void *l);
-typedef void *                          (*Eet_Descriptor_List_Free_Callback)(void *l);
-typedef void                            (*Eet_Descriptor_Hash_Foreach_Callback)(void *h, Eet_Descriptor_Hash_Foreach_Callback_Callback func, void *fdt);
-typedef void *                          (*Eet_Descriptor_Hash_Add_Callback)(void *h, const char *k, void *d);
-typedef void                            (*Eet_Descriptor_Hash_Free_Callback)(void *h);
-typedef char *                          (*Eet_Descriptor_Str_Direct_Alloc_Callback)(const char *str);
-typedef void                            (*Eet_Descriptor_Str_Direct_Free_Callback)(const char *str);
-typedef const char *                    (*Eet_Descriptor_Type_Get_Callback)(const void *data, Eina_Bool *unknow);
-typedef Eina_Bool                       (*Eet_Descriptor_Type_Set_Callback)(const char *type, void *data, Eina_Bool unknow);
-typedef void *                          (*Eet_Descriptor_Array_Alloc_Callback)(size_t size);
-typedef void                            (*Eet_Descriptor_Array_Free_Callback)(void *mem);
-/**
- * @struct _Eet_Data_Descriptor_Class
- *
- * Instructs Eet about memory management for different needs under
- * serialization and parse process.
- *
- * The list and hash methods match the Eina API, so for a more detalied
- * reference on them, look at the Eina_List and Eina_Hash documentation,
- * respectively.
- * For the most part these will be used with the standard Eina functions,
- * so using EET_EINA_STREAM_DATA_DESCRIPTOR_CLASS_SET() and
- * EET_EINA_FILE_DATA_DESCRIPTOR_CLASS_SET() will set up everything
- * accordingly.
- */
-struct _Eet_Data_Descriptor_Class
-{
-   int         version;  /**< ABI version. Should always be set to #EET_DATA_DESCRIPTOR_CLASS_VERSION */
-   const char *name;  /**< Name of the user data type to be serialized */
-   int         size;  /**< Size in bytes of the user data type to be serialized */
-   struct
-   {
-      Eet_Descriptor_Mem_Alloc_Callback        mem_alloc; /**< how to allocate memory (usually malloc()) */
-      Eet_Descriptor_Mem_Free_Callback         mem_free; /**< how to free memory (usually free()) */
-      Eet_Descriptor_Str_Alloc_Callback        str_alloc; /**< how to allocate a string */
-      Eet_Descriptor_Str_Free_Callback         str_free; /**< how to free a string */
-      Eet_Descriptor_List_Next_Callback        list_next; /**< how to iterate to the next element of a list. Receives and should return the list node. */
-      Eet_Descriptor_List_Append_Callback      list_append; /**< how to append data @p d to list which head node is @p l */
-      Eet_Descriptor_List_Data_Callback        list_data; /**< retrieves the data from node @p l */
-      Eet_Descriptor_List_Free_Callback        list_free; /**< free all the nodes from the list which head node is @p l */
-      Eet_Descriptor_Hash_Foreach_Callback     hash_foreach; /**< iterates over all elements in the hash @p h in no specific order */
-      Eet_Descriptor_Hash_Add_Callback         hash_add; /**< add a new data @p d with key @p k in hash @p h */
-      Eet_Descriptor_Hash_Free_Callback        hash_free; /**< free all entries from the hash @p h */
-      Eet_Descriptor_Str_Direct_Alloc_Callback str_direct_alloc; /**< how to allocate a string directly from file backed/mmaped region pointed by @p str */
-      Eet_Descriptor_Str_Direct_Free_Callback  str_direct_free; /**< how to free a string returned by str_direct_alloc */
-      Eet_Descriptor_Type_Get_Callback         type_get; /**< get the type, as used in the union or variant mapping, that should be used to store the given data into the eet file. */
-      Eet_Descriptor_Type_Set_Callback         type_set; /**< called when loading a mapped type with the given @p type used to describe the type in the descriptor */
-      Eet_Descriptor_Array_Alloc_Callback      array_alloc; /**< how to allocate memory for array (usually malloc()) */
-      Eet_Descriptor_Array_Free_Callback       array_free; /**< how to free memory for array (usually free()) */
-   } func;
-};
-
-/**
- * @}
- */
-
-/**
- * Create a new empty data structure descriptor.
- * @param name The string name of this data structure (most be a
- *        global constant and never change).
- * @param size The size of the struct (in bytes).
- * @param func_list_next The function to get the next list node.
- * @param func_list_append The function to append a member to a list.
- * @param func_list_data The function to get the data from a list node.
- * @param func_list_free The function to free an entire linked list.
- * @param func_hash_foreach The function to iterate through all
- *        hash table entries.
- * @param func_hash_add The function to add a member to a hash table.
- * @param func_hash_free The function to free an entire hash table.
- * @return A new empty data descriptor.
- *
- * This function creates a new data descriptore and returns a handle to the
- * new data descriptor. On creation it will be empty, containing no contents
- * describing anything other than the shell of the data structure.
- *
- * You add structure members to the data descriptor using the macros
- * EET_DATA_DESCRIPTOR_ADD_BASIC(), EET_DATA_DESCRIPTOR_ADD_SUB() and
- * EET_DATA_DESCRIPTOR_ADD_LIST(), depending on what type of member you are
- * adding to the description.
- *
- * Once you have described all the members of a struct you want loaded, or
- * saved eet can load and save those members for you, encode them into
- * endian-independent serialised data chunks for transmission across a
- * a network or more.
- *
- * The function pointers to the list and hash table functions are only
- * needed if you use those data types, else you can pass NULL instead.
- *
- * @since 1.0.0
- * @ingroup Eet_Data_Group
- *
- * @deprecated use eet_data_descriptor_stream_new() or
- *             eet_data_descriptor_file_new()
- */
-EINA_DEPRECATED EAPI Eet_Data_Descriptor *
-eet_data_descriptor_new(const char *name,
-                        int size,
-                        Eet_Descriptor_List_Next_Callback func_list_next,
-                        Eet_Descriptor_List_Append_Callback func_list_append,
-                        Eet_Descriptor_List_Data_Callback func_list_data,
-                        Eet_Descriptor_List_Free_Callback func_list_free,
-                        Eet_Descriptor_Hash_Foreach_Callback func_hash_foreach,
-                        Eet_Descriptor_Hash_Add_Callback func_hash_add,
-                        Eet_Descriptor_Hash_Free_Callback func_hash_free);
-/*
- * FIXME:
- *
- * moving to this api from the old above. this will break things when the
- * move happens - but be warned
- */
-EINA_DEPRECATED EAPI Eet_Data_Descriptor *
- eet_data_descriptor2_new(const Eet_Data_Descriptor_Class *eddc);
-EINA_DEPRECATED EAPI Eet_Data_Descriptor *
- eet_data_descriptor3_new(const Eet_Data_Descriptor_Class *eddc);
-
-/**
- * This function creates a new data descriptor and returns a handle to the
- * new data descriptor. On creation it will be empty, containing no contents
- * describing anything other than the shell of the data structure.
- * @param eddc The class from where to create the data descriptor.
- *
- * You add structure members to the data descriptor using the macros
- * EET_DATA_DESCRIPTOR_ADD_BASIC(), EET_DATA_DESCRIPTOR_ADD_SUB() and
- * EET_DATA_DESCRIPTOR_ADD_LIST(), depending on what type of member you are
- * adding to the description.
- *
- * Once you have described all the members of a struct you want loaded or
- * savedi, eet can load and save those members for you, encode them into
- * endian-independent serialised data chunks for transmission across a
- * a network or more.
- *
- * This function specially ignores str_direct_alloc and str_direct_free. It
- * is useful when the eet_data you are reading doesn't have a dictionary,
- * like network stream or IPC. It also mean that all string will be allocated
- * and duplicated in memory.
- *
- * @since 1.2.3
- * @ingroup Eet_Data_Group
- */
-EAPI Eet_Data_Descriptor *
-eet_data_descriptor_stream_new(const Eet_Data_Descriptor_Class *eddc);
-
-/**
- * This function creates a new data descriptor and returns a handle to the
- * new data descriptor. On creation it will be empty, containing no contents
- * describing anything other than the shell of the data structure.
- * @param eddc The class from where to create the data descriptor.
- *
- * You add structure members to the data descriptor using the macros
- * EET_DATA_DESCRIPTOR_ADD_BASIC(), EET_DATA_DESCRIPTOR_ADD_SUB() and
- * EET_DATA_DESCRIPTOR_ADD_LIST(), depending on what type of member you are
- * adding to the description.
- *
- * Once you have described all the members of a struct you want loaded or
- * savedi, eet can load and save those members for you, encode them into
- * endian-independent serialised data chunks for transmission across a
- * a network or more.
- *
- * This function uses str_direct_alloc and str_direct_free. It is
- * useful when the eet_data you are reading come from a file and
- * have a dictionary. This will reduce memory use and improve the
- * possibility for the OS to page this string out.
- * However, the load speed and memory saving comes with some drawbacks to keep
- * in mind. If you never modify the contents of the structures loaded from
- * the file, all you need to remember is that closing the eet file will make
- * the strings go away. On the other hand, should you need to free a string,
- * before doing so you have to verify that it's not part of the eet dictionary.
- * You can do this in the following way, assuming @p ef is a valid Eet_File
- * and @p str is a string loaded from said file.
- *
- * @code
- * void eet_string_free(Eet_File *ef, const char *str)
- * {
- *    Eet_Dictionary *dict = eet_dictionary_get(ef);
- *    if (dict && eet_dictionary_string_check(dict, str))
- *      {
- *         // The file contains a dictionary and the given string is a part of
- *         // of it, so we can't free it, just return.
- *         return;
- *      }
- *    // We assume eina_stringshare was used on the descriptor
- *    eina_stringshare_del(str);
- * }
- * @endcode
- *
- * @since 1.2.3
- * @ingroup Eet_Data_Group
- */
-EAPI Eet_Data_Descriptor *
-eet_data_descriptor_file_new(const Eet_Data_Descriptor_Class *eddc);
-
-/**
- * This function is an helper that set all the parameters of an
- * Eet_Data_Descriptor_Class correctly when you use Eina data type
- * with a stream.
- * @param eddc The Eet_Data_Descriptor_Class you want to set.
- * @param eddc_size The size of the Eet_Data_Descriptor_Class at the compilation time.
- * @param name The name of the structure described by this class.
- * @param size The size of the structure described by this class.
- * @return EINA_TRUE if the structure was correctly set (The only
- *         reason that could make it fail is if you did give wrong
- *         parameter).
- *
- * @note Unless there's a very specific reason to use this function directly,
- * the EET_EINA_STREAM_DATA_DESCRIPTOR_CLASS_SET macro is recommended.
- *
- * @since 1.2.3
- * @ingroup Eet_Data_Group
- */
-EAPI Eina_Bool
-eet_eina_stream_data_descriptor_class_set(Eet_Data_Descriptor_Class *eddc,
-                                          unsigned int eddc_size,
-                                          const char *name,
-                                          int size);
-
-/**
- * This macro is an helper that set all the parameter of an
- * Eet_Data_Descriptor_Class correctly when you use Eina data type
- * with stream.
- * @param clas The Eet_Data_Descriptor_Class you want to set.
- * @param type The type of the structure described by this class.
- * @return EINA_TRUE if the structure was correctly set (The only
- *         reason that could make it fail is if you did give wrong
- *         parameter).
- *
- * @see eet_data_descriptor_stream_new
- * @since 1.2.3
- * @ingroup Eet_Data_Group
- */
-#define EET_EINA_STREAM_DATA_DESCRIPTOR_CLASS_SET(clas, type) \
-  (eet_eina_stream_data_descriptor_class_set(clas, sizeof (*(clas)), # type, sizeof(type)))
-
-/**
- * This function is an helper that set all the parameter of an
- * Eet_Data_Descriptor_Class correctly when you use Eina data type
- * with a file.
- * @param eddc The Eet_Data_Descriptor_Class you want to set.
- * @param eddc_size The size of the Eet_Data_Descriptor_Class at the compilation time.
- * @param name The name of the structure described by this class.
- * @param size The size of the structure described by this class.
- * @return EINA_TRUE if the structure was correctly set (The only
- *         reason that could make it fail is if you did give wrong
- *         parameter).
- *
- * @note Unless there's a very specific reason to use this function directly,
- * the EET_EINA_FILE_DATA_DESCRIPTOR_CLASS_SET macro is recommended.
- *
- * @since 1.2.3
- * @ingroup Eet_Data_Group
- */
-EAPI Eina_Bool
-eet_eina_file_data_descriptor_class_set(Eet_Data_Descriptor_Class *eddc,
-                                        unsigned int eddc_size,
-                                        const char *name,
-                                        int size);
-
-/**
- * This macro is an helper that set all the parameter of an
- * Eet_Data_Descriptor_Class correctly when you use Eina data type
- * with file.
- * @param clas The Eet_Data_Descriptor_Class you want to set.
- * @param type The type of the structure described by this class.
- * @return EINA_TRUE if the structure was correctly set (The only
- *         reason that could make it fail is if you did give wrong
- *         parameter).
- *
- * @see eet_data_descriptor_file_new
- * @since 1.2.3
- * @ingroup Eet_Data_Group
- */
-#define EET_EINA_FILE_DATA_DESCRIPTOR_CLASS_SET(clas, type) \
-  (eet_eina_file_data_descriptor_class_set(clas, sizeof (*(clas)), # type, sizeof(type)))
-
-/**
- * This function frees a data descriptor when it is not needed anymore.
- * @param edd The data descriptor to free.
- *
- * This function takes a data descriptor handle as a parameter and frees all
- * data allocated for the data descriptor and the handle itself. After this
- * call the descriptor is no longer valid.
- *
- * @since 1.0.0
- * @ingroup Eet_Data_Group
- */
-EAPI void
-eet_data_descriptor_free(Eet_Data_Descriptor *edd);
-
-/**
- * This function is an internal used by macros.
- *
- * This function is used by macros EET_DATA_DESCRIPTOR_ADD_BASIC(),
- * EET_DATA_DESCRIPTOR_ADD_SUB() and EET_DATA_DESCRIPTOR_ADD_LIST(). It is
- * complex to use by hand and should be left to be used by the macros, and
- * thus is not documented.
- *
- * @param edd The data descriptor handle to add element (member).
- * @param name The name of element to be serialized.
- * @param type The type of element to be serialized, like
- *        #EET_T_INT. If #EET_T_UNKNOW, then it is considered to be a
- *        group, list or hash.
- * @param group_type If element type is #EET_T_UNKNOW, then the @p
- *        group_type will speficy if it is a list (#EET_G_LIST),
- *        array (#EET_G_ARRAY) and so on. If #EET_G_UNKNOWN, then
- *        the member is a subtype (pointer to another type defined by
- *        another #Eet_Data_Descriptor).
- * @param offset byte offset inside the source memory to be serialized.
- * @param count number of elements (if #EET_G_ARRAY or #EET_G_VAR_ARRAY).
- * @param counter_name variable that defines the name of number of elements.
- * @param subtype If contains a subtype, then its data descriptor.
- *
- * @since 1.0.0
- * @ingroup Eet_Data_Group
- */
-EAPI void
-eet_data_descriptor_element_add(Eet_Data_Descriptor *edd,
-                                const char *name,
-                                int type,
-                                int group_type,
-                                int offset,
-     /* int                  count_offset, */
-                                int count,
-                                const char *counter_name,
-                                Eet_Data_Descriptor *subtype);
-
-/**
- * Read a data structure from an eet file and decodes it.
- * @param ef The eet file handle to read from.
- * @param edd The data descriptor handle to use when decoding.
- * @param name The key the data is stored under in the eet file.
- * @return A pointer to the decoded data structure.
- *
- * This function decodes a data structure stored in an eet file, returning
- * a pointer to it if it decoded successfully, or NULL on failure. This
- * can save a programmer dozens of hours of work in writing configuration
- * file parsing and writing code, as eet does all that work for the program
- * and presents a program-friendly data structure, just as the programmer
- * likes. Eet can handle members being added or deleted from the data in
- * storage and safely zero-fills unfilled members if they were not found
- * in the data. It checks sizes and headers whenever it reads data, allowing
- * the programmer to not worry about corrupt data.
- *
- * Once a data structure has been described by the programmer with the
- * fields they wish to save or load, storing or retrieving a data structure
- * from an eet file, or from a chunk of memory is as simple as a single
- * function call.
- *
- * @see eet_data_read_cipher()
- *
- * @since 1.0.0
- * @ingroup Eet_Data_Group
- */
-EAPI void *
-eet_data_read(Eet_File *ef,
-              Eet_Data_Descriptor *edd,
-              const char *name);
-
-/**
- * Write a data structure from memory and store in an eet file.
- * @param ef The eet file handle to write to.
- * @param edd The data descriptor to use when encoding.
- * @param name The key to store the data under in the eet file.
- * @param data A pointer to the data structure to ssave and encode.
- * @param compress Compression flags for storage.
- * @return bytes written on successful write, 0 on failure.
- *
- * This function is the reverse of eet_data_read(), saving a data structure
- * to an eet file. The file must have been opening in write mode and the data
- * will be kept in memory until the file is either closed or eet_sync() is
- * called to flush any unwritten changes.
- *
- * @see eet_data_write_cipher()
- *
- * @since 1.0.0
- * @ingroup Eet_Data_Group
- */
-EAPI int
-eet_data_write(Eet_File *ef,
-               Eet_Data_Descriptor *edd,
-               const char *name,
-               const void *data,
-               int compress);
-
-typedef void (*Eet_Dump_Callback)(void *data, const char *str);
-
-/**
- * Dump an eet encoded data structure into ascii text
- * @param data_in The pointer to the data to decode into a struct.
- * @param size_in The size of the data pointed to in bytes.
- * @param dumpfunc The function to call passed a string when new
- *        data is converted to text
- * @param dumpdata The data to pass to the @p dumpfunc callback.
- * @return 1 on success, 0 on failure
- *
- * This function will take a chunk of data encoded by
- * eet_data_descriptor_encode() and convert it into human readable
- * ascii text.  It does this by calling the @p dumpfunc callback
- * for all new text that is generated. This callback should append
- * to any existing text buffer and will be passed the pointer @p
- * dumpdata as a parameter as well as a string with new text to be
- * appended.
- *
- * Example:
- *
- * @code
- * void output(void *data, const char *string)
- * {
- *   printf("%s", string);
- * }
- *
- * void dump(const char *file)
- * {
- *   FILE *f;
- *   int len;
- *   void *data;
- *
- *   f = fopen(file, "r");
- *   fseek(f, 0, SEEK_END);
- *   len = ftell(f);
- *   rewind(f);
- *   data = malloc(len);
- *   fread(data, len, 1, f);
- *   fclose(f);
- *   eet_data_text_dump(data, len, output, NULL);
- * }
- * @endcode
- *
- * @see eet_data_text_dump_cipher()
- *
- * @since 1.0.0
- * @ingroup Eet_Data_Group
- */
-EAPI int
-eet_data_text_dump(const void *data_in,
-                   int size_in,
-                   Eet_Dump_Callback dumpfunc,
-                   void *dumpdata);
-
-/**
- * Take an ascii encoding from eet_data_text_dump() and re-encode in binary.
- * @param text The pointer to the string data to parse and encode.
- * @param textlen The size of the string in bytes (not including 0
- *        byte terminator).
- * @param size_ret This gets filled in with the encoded data blob
- *        size in bytes.
- * @return The encoded data on success, NULL on failure.
- *
- * This function will parse the string pointed to by @p text and return
- * an encoded data lump the same way eet_data_descriptor_encode() takes an
- * in-memory data struct and encodes into a binary blob. @p text is a normal
- * C string.
- *
- * @see eet_data_text_undump_cipher()
- *
- * @since 1.0.0
- * @ingroup Eet_Data_Group
- */
-EAPI void *
-eet_data_text_undump(const char *text,
-                     int textlen,
-                     int *size_ret);
-
-/**
- * Dump an eet encoded data structure from an eet file into ascii text
- * @param ef A valid eet file handle.
- * @param name Name of the entry. eg: "/base/file_i_want".
- * @param dumpfunc The function to call passed a string when new
- *        data is converted to text
- * @param dumpdata The data to pass to the @p dumpfunc callback.
- * @return 1 on success, 0 on failure
- *
- * This function will take an open and valid eet file from
- * eet_open() request the data encoded by
- * eet_data_descriptor_encode() corresponding to the key @p name
- * and convert it into human readable ascii text. It does this by
- * calling the @p dumpfunc callback for all new text that is
- * generated. This callback should append to any existing text
- * buffer and will be passed the pointer @p dumpdata as a parameter
- * as well as a string with new text to be appended.
- *
- * @see eet_data_dump_cipher()
- *
- * @since 1.0.0
- * @ingroup Eet_Data_Group
- */
-EAPI int
-eet_data_dump(Eet_File *ef,
-              const char *name,
-              Eet_Dump_Callback dumpfunc,
-              void *dumpdata);
-
-/**
- * Take an ascii encoding from eet_data_dump() and re-encode in binary.
- * @param ef A valid eet file handle.
- * @param name Name of the entry. eg: "/base/file_i_want".
- * @param text The pointer to the string data to parse and encode.
- * @param textlen The size of the string in bytes (not including 0
- *        byte terminator).
- * @param compress Compression flags (1 == compress, 0 = don't compress).
- * @return 1 on success, 0 on failure
- *
- * This function will parse the string pointed to by @p text,
- * encode it the same way eet_data_descriptor_encode() takes an
- * in-memory data struct and encodes into a binary blob.
- *
- * The data (optionally compressed) will be in ram, pending a flush to
- * disk (it will stay in ram till the eet file handle is closed though).
- *
- * @see eet_data_undump_cipher()
- *
- * @since 1.0.0
- * @ingroup Eet_Data_Group
- */
-EAPI int
-eet_data_undump(Eet_File *ef,
-                const char *name,
-                const char *text,
-                int textlen,
-                int compress);
-
-/**
- * Decode a data structure from an arbitrary location in memory.
- * @param edd The data  descriptor to use when decoding.
- * @param data_in The pointer to the data to decode into a struct.
- * @param size_in The size of the data pointed to in bytes.
- * @return NULL on failure, or a valid decoded struct pointer on success.
- *
- * This function will decode a data structure that has been encoded using
- * eet_data_descriptor_encode(), and return a data structure with all its
- * elements filled out, if successful, or NULL on failure.
- *
- * The data to be decoded is stored at the memory pointed to by @p data_in,
- * and is described by the descriptor pointed to by @p edd. The data size is
- * passed in as the value to @p size_in, ande must be greater than 0 to
- * succeed.
- *
- * This function is useful for decoding data structures delivered to the
- * application by means other than an eet file, such as an IPC or socket
- * connection, raw files, shared memory etc.
- *
- * Please see eet_data_read() for more information.
- *
- * @see eet_data_descriptor_decode_cipher()
- *
- * @since 1.0.0
- * @ingroup Eet_Data_Group
- */
-EAPI void *
-eet_data_descriptor_decode(Eet_Data_Descriptor *edd,
-                           const void *data_in,
-                           int size_in);
-
-/**
- * Encode a dsata struct to memory and return that encoded data.
- * @param edd The data  descriptor to use when encoding.
- * @param data_in The pointer to the struct to encode into data.
- * @param size_ret pointer to the an int to be filled with the decoded size.
- * @return NULL on failure, or a valid encoded data chunk on success.
- *
- * This function takes a data structutre in memory and encodes it into a
- * serialised chunk of data that can be decoded again by
- * eet_data_descriptor_decode(). This is useful for being able to transmit
- * data structures across sockets, pipes, IPC or shared file mechanisms,
- * without having to worry about memory space, machine type, endianess etc.
- *
- * The parameter @p edd must point to a valid data descriptor, and
- * @p data_in must point to the right data structure to encode. If not, the
- * encoding may fail.
- *
- * On success a non NULL valid pointer is returned and what @p size_ret
- * points to is set to the size of this decoded data, in bytes. When the
- * encoded data is no longer needed, call free() on it. On failure NULL is
- * returned and what @p size_ret points to is set to 0.
- *
- * Please see eet_data_write() for more information.
- *
- * @see eet_data_descriptor_encode_cipher()
- *
- * @since 1.0.0
- * @ingroup Eet_Data_Group
- */
-EAPI void *
-eet_data_descriptor_encode(Eet_Data_Descriptor *edd,
-                           const void *data_in,
-                           int *size_ret);
-
-/**
- * Add a basic data element to a data descriptor.
- * @param edd The data descriptor to add the type to.
- * @param struct_type The type of the struct.
- * @param name The string name to use to encode/decode this member
- *        (must be a constant global and never change).
- * @param member The struct member itself to be encoded.
- * @param type The type of the member to encode.
- *
- * This macro is a convenience macro provided to add a member to
- * the data descriptor @p edd. The type of the structure is
- * provided as the @p struct_type parameter (for example: struct
- * my_struct). The @p name parameter defines a string that will be
- * used to uniquely name that member of the struct (it is suggested
- * to use the struct member itself).  The @p member parameter is
- * the actual struct member itself (for example: values), and @p type is the
- * basic data type of the member which must be one of: EET_T_CHAR, EET_T_SHORT,
- * EET_T_INT, EET_T_LONG_LONG, EET_T_FLOAT, EET_T_DOUBLE, EET_T_UCHAR,
- * EET_T_USHORT, EET_T_UINT, EET_T_ULONG_LONG or EET_T_STRING.
- *
- * @since 1.0.0
- * @ingroup Eet_Data_Group
- */
-#define EET_DATA_DESCRIPTOR_ADD_BASIC(edd, struct_type, name, member, type) \
-  do {                                                                      \
-       struct_type ___ett;                                                  \
-       eet_data_descriptor_element_add(edd, name, type, EET_G_UNKNOWN,      \
-                                       (char *)(& (___ett.member)) -        \
-                                       (char *)(& (___ett)),                \
-                                       0, /* 0,  */ NULL, NULL);            \
-    } while(0)
-
-/**
- * Add a sub-element type to a data descriptor
- * @param edd The data descriptor to add the type to.
- * @param struct_type The type of the struct.
- * @param name The string name to use to encode/decode this member
- *        (must be a constant global and never change).
- * @param member The struct member itself to be encoded.
- * @param subtype The type of sub-type struct to add.
- *
- * This macro lets you easily add a sub-type (a struct that's pointed to
- * by this one). All the parameters are the same as for
- * EET_DATA_DESCRIPTOR_ADD_BASIC(), with the @p subtype being the exception.
- * This must be the data descriptor of the struct that is pointed to by
- * this element.
- *
- * @since 1.0.0
- * @ingroup Eet_Data_Group
- */
-#define EET_DATA_DESCRIPTOR_ADD_SUB(edd, struct_type, name, member, subtype)   \
-  do {                                                                         \
-       struct_type ___ett;                                                     \
-       eet_data_descriptor_element_add(edd, name, EET_T_UNKNOW, EET_G_UNKNOWN, \
-                                       (char *)(& (___ett.member)) -           \
-                                       (char *)(& (___ett)),                   \
-                                       0, /* 0,  */ NULL, subtype);            \
-    } while (0)
-
-/**
- * Add a linked list type to a data descriptor
- * @param edd The data descriptor to add the type to.
- * @param struct_type The type of the struct.
- * @param name The string name to use to encode/decode this member
- *        (must be a constant global and never change).
- * @param member The struct member itself to be encoded.
- * @param subtype The type of linked list member to add.
- *
- * This macro lets you easily add a linked list of other data types. All the
- * parameters are the same as for EET_DATA_DESCRIPTOR_ADD_BASIC(), with the
- * @p subtype being the exception. This must be the data descriptor of the
- * element that is in each member of the linked list to be stored.
- *
- * @since 1.0.0
- * @ingroup Eet_Data_Group
- */
-#define EET_DATA_DESCRIPTOR_ADD_LIST(edd, struct_type, name, member, subtype) \
-  do {                                                                        \
-       struct_type ___ett;                                                    \
-       eet_data_descriptor_element_add(edd, name, EET_T_UNKNOW, EET_G_LIST,   \
-                                       (char *)(& (___ett.member)) -          \
-                                       (char *)(& (___ett)),                  \
-                                       0, /* 0,  */ NULL, subtype);           \
-    } while (0)
-
-/**
- * Add a linked list of string to a data descriptor
- * @param edd The data descriptor to add the type to.
- * @param struct_type The type of the struct.
- * @param name The string name to use to encode/decode this member
- *        (must be a constant global and never change).
- * @param member The struct member itself to be encoded.
- *
- * This macro lets you easily add a linked list of char *. All the
- * parameters are the same as for EET_DATA_DESCRIPTOR_ADD_BASIC().
- *
- * @since 1.5.0
- * @ingroup Eet_Data_Group
- */
-#define EET_DATA_DESCRIPTOR_ADD_LIST_STRING(edd, struct_type, name, member) \
-  do {                                                                      \
-       struct_type ___ett;                                                  \
-       eet_data_descriptor_element_add(edd, name, EET_T_STRING, EET_G_LIST, \
-                                       (char *)(& (___ett.member)) -        \
-                                       (char *)(& (___ett)),                \
-                                       0, /* 0,  */ NULL, NULL);            \
-    } while (0)
-
-/**
- * Add a hash type to a data descriptor
- * @param edd The data descriptor to add the type to.
- * @param struct_type The type of the struct.
- * @param name The string name to use to encode/decode this member
- *        (must be a constant global and never change).
- * @param member The struct member itself to be encoded.
- * @param subtype The type of hash member to add.
- *
- * This macro lets you easily add a hash of other data types. All the
- * parameters are the same as for EET_DATA_DESCRIPTOR_ADD_BASIC(), with the
- * @p subtype being the exception. This must be the data descriptor of the
- * element that is in each member of the hash to be stored.
- * The hash keys must be strings.
- *
- * @since 1.0.0
- * @ingroup Eet_Data_Group
- */
-#define EET_DATA_DESCRIPTOR_ADD_HASH(edd, struct_type, name, member, subtype) \
-  do {                                                                        \
-       struct_type ___ett;                                                    \
-       eet_data_descriptor_element_add(edd, name, EET_T_UNKNOW, EET_G_HASH,   \
-                                       (char *)(& (___ett.member)) -          \
-                                       (char *)(& (___ett)),                  \
-                                       0, /* 0,  */ NULL, subtype);           \
-    } while (0)
-
-/**
- * Add a hash of string to a data descriptor
- * @param edd The data descriptor to add the type to.
- * @param struct_type The type of the struct.
- * @param name The string name to use to encode/decode this member
- *        (must be a constant global and never change).
- * @param member The struct member itself to be encoded.
- *
- * This macro lets you easily add a hash of string elements. All the
- * parameters are the same as for EET_DATA_DESCRIPTOR_ADD_HASH().
- *
- * @since 1.3.4
- * @ingroup Eet_Data_Group
- */
-#define EET_DATA_DESCRIPTOR_ADD_HASH_STRING(edd, struct_type, name, member) \
-  do {                                                                      \
-       struct_type ___ett;                                                  \
-       eet_data_descriptor_element_add(edd, name, EET_T_STRING, EET_G_HASH, \
-                                       (char *)(& (___ett.member)) -        \
-                                       (char *)(& (___ett)),                \
-                                       0, /* 0,  */ NULL, NULL);            \
-    } while (0)
-
-/**
- * Add an array of basic data elements to a data descriptor.
- * @param edd The data descriptor to add the type to.
- * @param struct_type The type of the struct.
- * @param name The string name to use to encode/decode this member
- *        (must be a constant global and never change).
- * @param member The struct member itself to be encoded.
- * @param type The type of the member to encode.
- *
- * This macro lets you easily add a fixed size array of basic data
- * types. All the parameters are the same as for
- * EET_DATA_DESCRIPTOR_ADD_BASIC().
- * The array must be defined with a fixed size in the declaration of the
- * struct containing it.
- *
- * @since 1.5.0
- * @ingroup Eet_Data_Group
- */
-#define EET_DATA_DESCRIPTOR_ADD_BASIC_ARRAY(edd, struct_type, name, member, type) \
-  do {                                                                            \
-       struct_type ___ett;                                                        \
-       eet_data_descriptor_element_add(edd, name, type, EET_G_ARRAY,              \
-                                       (char *)(& (___ett.member)) -              \
-                                       (char *)(& (___ett)),                      \
-                                       sizeof(___ett.member) /                    \
-                                       sizeof(___ett.member[0]),                  \
-                                       NULL, NULL);                               \
-    } while(0)
-
-/**
- * Add a fixed size array type to a data descriptor
- * @param edd The data descriptor to add the type to.
- * @param struct_type The type of the struct.
- * @param name The string name to use to encode/decode this member
- *        (must be a constant global and never change).
- * @param member The struct member itself to be encoded.
- * @param subtype The type of hash member to add.
- *
- * This macro lets you easily add a fixed size array of other data
- * types. All the parameters are the same as for
- * EET_DATA_DESCRIPTOR_ADD_BASIC(), with the @p subtype being the
- * exception. This must be the data descriptor of the element that
- * is in each member of the array to be stored.
- * The array must be defined with a fixed size in the declaration of the
- * struct containing it.
- *
- * @since 1.0.2
- * @ingroup Eet_Data_Group
- */
-#define EET_DATA_DESCRIPTOR_ADD_ARRAY(edd, struct_type, name, member, subtype)   \
-  do {                                                                           \
-       struct_type ___ett;                                                       \
-       eet_data_descriptor_element_add(edd, name, EET_T_UNKNOW, EET_G_ARRAY,     \
-                                       (char *)(& (___ett.member)) -             \
-                                       (char *)(& (___ett)),                     \
-                                       /* 0,  */ sizeof(___ett.member) /         \
-                                       sizeof(___ett.member[0]), NULL, subtype); \
-    } while (0)
-
-/**
- * Add a variable size array type to a data descriptor
- * @param edd The data descriptor to add the type to.
- * @param struct_type The type of the struct.
- * @param name The string name to use to encode/decode this member
- *        (must be a constant global and never change).
- * @param member The struct member itself to be encoded.
- * @param subtype The type of hash member to add.
- *
- * This macro lets you easily add a variable size array of other data
- * types. All the parameters are the same as for
- * EET_DATA_DESCRIPTOR_ADD_BASIC(), with the @p subtype being the
- * exception. This must be the data descriptor of the element that
- * is in each member of the array to be stored. This assumes you have
- * a struct member (of type EET_T_INT) called member_count (note the
- * _count appended to the member) that holds the number of items in
- * the array. This array will be allocated separately to the struct it
- * is in.
- *
- * @since 1.0.2
- * @ingroup Eet_Data_Group
- */
-#define EET_DATA_DESCRIPTOR_ADD_VAR_ARRAY(edd, struct_type, name, member, subtype) \
-  do {                                                                             \
-       struct_type ___ett;                                                         \
-       eet_data_descriptor_element_add(edd,                                        \
-                                       name,                                       \
-                                       EET_T_UNKNOW,                               \
-                                       EET_G_VAR_ARRAY,                            \
-                                       (char *)(& (___ett.member)) -               \
-                                       (char *)(& (___ett)),                       \
-                                       (char *)(& (___ett.member ## _count)) -     \
-                                       (char *)(& (___ett)),                       \
-                                       /* 0,  */ NULL,                             \
-                                       subtype);                                   \
-    } while (0)
-
-/**
- * Add a variable size array type to a data descriptor
- * @param edd The data descriptor to add the type to.
- * @param struct_type The type of the struct.
- * @param name The string name to use to encode/decode this member
- *        (must be a constant global and never change).
- * @param member The struct member itself to be encoded.
- *
- * This macro lets you easily add a variable size array of strings. All
- * the parameters are the same as for EET_DATA_DESCRIPTOR_ADD_BASIC().
- *
- * @since 1.4.0
- * @ingroup Eet_Data_Group
- */
-#define EET_DATA_DESCRIPTOR_ADD_VAR_ARRAY_STRING(edd, struct_type, name, member) \
-  do {                                                                           \
-       struct_type ___ett;                                                       \
-       eet_data_descriptor_element_add(edd,                                      \
-                                       name,                                     \
-                                       EET_T_STRING,                             \
-                                       EET_G_VAR_ARRAY,                          \
-                                       (char *)(& (___ett.member)) -             \
-                                       (char *)(& (___ett)),                     \
-                                       (char *)(& (___ett.member ## _count)) -   \
-                                       (char *)(& (___ett)),                     \
-                                       /* 0,  */ NULL,                           \
-                                       NULL);                                    \
-    } while (0)
-
-/**
- * Add an union type to a data descriptor
- * @param edd The data descriptor to add the type to.
- * @param struct_type The type of the struct.
- * @param name The string name to use to encode/decode this member
- *        (must be a constant global and never change).
- * @param member The struct member itself to be encoded.
- * @param type_member The member that give hints on what is in the union.
- * @param unified_type Describe all possible type the union could handle.
- *
- * This macro lets you easily add an union with a member that specify what is inside.
- * The @p unified_type is an Eet_Data_Descriptor, but only the entry that match the name
- * returned by type_get will be used for each serialized data. The type_get and type_set
- * callback of unified_type should be defined.
- *
- * @since 1.2.4
- * @ingroup Eet_Data_Group
- * @see Eet_Data_Descriptor_Class
- */
-#define EET_DATA_DESCRIPTOR_ADD_UNION(edd, struct_type, name, member, type_member, unified_type) \
-  do {                                                                                           \
-       struct_type ___ett;                                                                       \
-       eet_data_descriptor_element_add(edd, name, EET_T_UNKNOW, EET_G_UNION,                     \
-                                       (char *)(& (___ett.member)) -                             \
-                                       (char *)(& (___ett)),                                     \
-                                       (char *)(& (___ett.type_member)) -                        \
-                                       (char *)(& (___ett)),                                     \
-                                       NULL, unified_type);                                      \
-    } while (0)
-
-/**
- * Add a automatically selectable type to a data descriptor
- * @param edd The data descriptor to add the type to.
- * @param struct_type The type of the struct.
- * @param name The string name to use to encode/decode this member
- *        (must be a constant global and never change).
- * @param member The struct member itself to be encoded.
- * @param type_member The member that give hints on what is in the union.
- * @param unified_type Describe all possible type the union could handle.
- *
- * This macro lets you easily define what the content of @p member points to depending of
- * the content of @p type_member. The type_get and type_set callback of unified_type should
- * be defined. If the the type is not know at the time of restoring it, eet will still call
- * type_set of @p unified_type but the pointer will be set to a serialized binary representation
- * of what eet know. This make it possible, to save this pointer again by just returning the string
- * given previously and telling it by setting unknow to EINA_TRUE.
- *
- * @since 1.2.4
- * @ingroup Eet_Data_Group
- * @see Eet_Data_Descriptor_Class
- */
-#define EET_DATA_DESCRIPTOR_ADD_VARIANT(edd, struct_type, name, member, type_member, unified_type) \
-  do {                                                                                             \
-       struct_type ___ett;                                                                         \
-       eet_data_descriptor_element_add(edd, name, EET_T_UNKNOW, EET_G_VARIANT,                     \
-                                       (char *)(& (___ett.member)) -                               \
-                                       (char *)(& (___ett)),                                       \
-                                       (char *)(& (___ett.type_member)) -                          \
-                                       (char *)(& (___ett)),                                       \
-                                       NULL, unified_type);                                        \
-    } while (0)
-
-/**
- * Add a mapping to a data descriptor that will be used by union, variant or inherited type
- * @param unified_type The data descriptor to add the mapping to.
- * @param name The string name to get/set type.
- * @param subtype The matching data descriptor.
- *
- * @since 1.2.4
- * @ingroup Eet_Data_Group
- * @see Eet_Data_Descriptor_Class
- */
-#define EET_DATA_DESCRIPTOR_ADD_MAPPING(unified_type, name, subtype) \
-  eet_data_descriptor_element_add(unified_type,                      \
-                                  name,                              \
-                                  EET_T_UNKNOW,                      \
-                                  EET_G_UNKNOWN,                     \
-                                  0,                                 \
-                                  0,                                 \
-                                  NULL,                              \
-                                  subtype)
-
-/**
- * @defgroup Eet_Data_Cipher_Group Eet Data Serialization using A Ciphers
- *
- * Most of the @ref Eet_Data_Group have alternative versions that
- * accounts for ciphers to protect their content.
- *
- * @see @ref Eet_Cipher_Group
- *
- * @ingroup Eet_Data_Group
- */
-
-/**
- * Read a data structure from an eet file and decodes it using a cipher.
- * @param ef The eet file handle to read from.
- * @param edd The data descriptor handle to use when decoding.
- * @param name The key the data is stored under in the eet file.
- * @param cipher_key The key to use as cipher.
- * @return A pointer to the decoded data structure.
- *
- * This function decodes a data structure stored in an eet file, returning
- * a pointer to it if it decoded successfully, or NULL on failure. This
- * can save a programmer dozens of hours of work in writing configuration
- * file parsing and writing code, as eet does all that work for the program
- * and presents a program-friendly data structure, just as the programmer
- * likes. Eet can handle members being added or deleted from the data in
- * storage and safely zero-fills unfilled members if they were not found
- * in the data. It checks sizes and headers whenever it reads data, allowing
- * the programmer to not worry about corrupt data.
- *
- * Once a data structure has been described by the programmer with the
- * fields they wish to save or load, storing or retrieving a data structure
- * from an eet file, or from a chunk of memory is as simple as a single
- * function call.
- *
- * @see eet_data_read()
- *
- * @since 1.0.0
- * @ingroup Eet_Data_Cipher_Group
- */
-EAPI void *
-eet_data_read_cipher(Eet_File *ef,
-                     Eet_Data_Descriptor *edd,
-                     const char *name,
-                     const char *cipher_key);
-
-/**
- * Read a data structure from an eet extended attribute and decodes it using a cipher.
- * @param filename The file to extract the extended attribute from.
- * @param attribute The attribute to get the data from.
- * @param edd The data descriptor handle to use when decoding.
- * @param cipher_key The key to use as cipher.
- * @return A pointer to the decoded data structure.
- *
- * This function decodes a data structure stored in an eet extended attribute,
- * returning a pointer to it if it decoded successfully, or NULL on failure.
- * Eet can handle members being added or deleted from the data in
- * storage and safely zero-fills unfilled members if they were not found
- * in the data. It checks sizes and headers whenever it reads data, allowing
- * the programmer to not worry about corrupt data.
- *
- * Once a data structure has been described by the programmer with the
- * fields they wish to save or load, storing or retrieving a data structure
- * from an eet file, from a chunk of memory or from an extended attribute
- * is as simple as a single function call.
- *
- * @since 1.5.0
- * @ingroup Eet_Data_Cipher_Group
- */
-EAPI void *
-eet_data_xattr_cipher_get(const char *filename,
-                          const char *attribute,
-                          Eet_Data_Descriptor *edd,
-                          const char *cipher_key);
-
-/**
- * Write a data structure from memory and store in an eet file
- * using a cipher.
- * @param ef The eet file handle to write to.
- * @param edd The data descriptor to use when encoding.
- * @param name The key to store the data under in the eet file.
- * @param cipher_key The key to use as cipher.
- * @param data A pointer to the data structure to ssave and encode.
- * @param compress Compression flags for storage.
- * @return bytes written on successful write, 0 on failure.
- *
- * This function is the reverse of eet_data_read_cipher(), saving a data structure
- * to an eet file.
- *
- * @since 1.0.0
- * @ingroup Eet_Data_Cipher_Group
- */
-EAPI int
-eet_data_write_cipher(Eet_File *ef,
-                      Eet_Data_Descriptor *edd,
-                      const char *name,
-                      const char *cipher_key,
-                      const void *data,
-                      int compress);
-
-/**
- * Write a data structure from memory and store in an eet extended attribute
- * using a cipher.
- * @param filename The file to write the extended attribute to.
- * @param attribute The attribute to store the data to.
- * @param edd The data descriptor to use when encoding.
- * @param cipher_key The key to use as cipher.
- * @param data A pointer to the data structure to ssave and encode.
- * @param flags The policy to use when setting the data.
- * @return EINA_TRUE on success, EINA_FALSE on failure.
- *
- * This function is the reverse of eet_data_xattr_cipher_get(), saving a data structure
- * to an eet extended attribute.
- *
- * @since 1.5.0
- * @ingroup Eet_Data_Cipher_Group
- */
-EAPI Eina_Bool
-eet_data_xattr_cipher_set(const char *filename,
-                          const char *attribute,
-                          Eet_Data_Descriptor *edd,
-                          const char *cipher_key,
-                          const void *data,
-                          Eina_Xattr_Flags flags);
-
-/**
- * Dump an eet encoded data structure into ascii text using a cipher.
- * @param data_in The pointer to the data to decode into a struct.
- * @param cipher_key The key to use as cipher.
- * @param size_in The size of the data pointed to in bytes.
- * @param dumpfunc The function to call passed a string when new
- *        data is converted to text
- * @param dumpdata The data to pass to the @p dumpfunc callback.
- * @return 1 on success, 0 on failure
- *
- * This function will take a chunk of data encoded by
- * eet_data_descriptor_encode() and convert it into human readable
- * ascii text.  It does this by calling the @p dumpfunc callback
- * for all new text that is generated. This callback should append
- * to any existing text buffer and will be passed the pointer @p
- * dumpdata as a parameter as well as a string with new text to be
- * appended.
- *
- * Example:
- *
- * @code
- * void output(void *data, const char *string)
- * {
- *   printf("%s", string);
- * }
- *
- * void dump(const char *file)
- * {
- *   FILE *f;
- *   int len;
- *   void *data;
- *
- *   f = fopen(file, "r");
- *   fseek(f, 0, SEEK_END);
- *   len = ftell(f);
- *   rewind(f);
- *   data = malloc(len);
- *   fread(data, len, 1, f);
- *   fclose(f);
- *   eet_data_text_dump_cipher(data, cipher_key, len, output, NULL);
- * }
- * @endcode
- *
- * @see eet_data_text_dump()
- *
- * @since 1.0.0
- * @ingroup Eet_Data_Cipher_Group
- */
-EAPI int
-eet_data_text_dump_cipher(const void *data_in,
-                          const char *cipher_key,
-                          int size_in,
-                          Eet_Dump_Callback dumpfunc,
-                          void *dumpdata);
-
-/**
- * Take an ascii encoding from eet_data_text_dump() and re-encode
- * in binary using a cipher.
- * @param text The pointer to the string data to parse and encode.
- * @param cipher_key The key to use as cipher.
- * @param textlen The size of the string in bytes (not including 0
- *        byte terminator).
- * @param size_ret This gets filled in with the encoded data blob
- *        size in bytes.
- * @return The encoded data on success, NULL on failure.
- *
- * This function will parse the string pointed to by @p text and return
- * an encoded data lump the same way eet_data_descriptor_encode() takes an
- * in-memory data struct and encodes into a binary blob. @p text is a normal
- * C string.
- *
- * @see eet_data_text_undump()
- *
- * @since 1.0.0
- * @ingroup Eet_Data_Cipher_Group
- */
-EAPI void *
-eet_data_text_undump_cipher(const char *text,
-                            const char *cipher_key,
-                            int textlen,
-                            int *size_ret);
-
-/**
- * Dump an eet encoded data structure from an eet file into ascii
- * text using a cipher.
- * @param ef A valid eet file handle.
- * @param name Name of the entry. eg: "/base/file_i_want".
- * @param cipher_key The key to use as cipher.
- * @param dumpfunc The function to call passed a string when new
- *        data is converted to text
- * @param dumpdata The data to pass to the @p dumpfunc callback.
- * @return 1 on success, 0 on failure
- *
- * This function will take an open and valid eet file from
- * eet_open() request the data encoded by
- * eet_data_descriptor_encode() corresponding to the key @p name
- * and convert it into human readable ascii text. It does this by
- * calling the @p dumpfunc callback for all new text that is
- * generated. This callback should append to any existing text
- * buffer and will be passed the pointer @p dumpdata as a parameter
- * as well as a string with new text to be appended.
- *
- * @see eet_data_dump()
- *
- * @since 1.0.0
- * @ingroup Eet_Data_Cipher_Group
- */
-EAPI int
-eet_data_dump_cipher(Eet_File *ef,
-                     const char *name,
-                     const char *cipher_key,
-                     Eet_Dump_Callback dumpfunc,
-                     void *dumpdata);
-
-/**
- * Take an ascii encoding from eet_data_dump() and re-encode in
- * binary using a cipher.
- * @param ef A valid eet file handle.
- * @param name Name of the entry. eg: "/base/file_i_want".
- * @param cipher_key The key to use as cipher.
- * @param text The pointer to the string data to parse and encode.
- * @param textlen The size of the string in bytes (not including 0
- *        byte terminator).
- * @param compress Compression flags (1 == compress, 0 = don't compress).
- * @return 1 on success, 0 on failure
- *
- * This function will parse the string pointed to by @p text,
- * encode it the same way eet_data_descriptor_encode() takes an
- * in-memory data struct and encodes into a binary blob.
- *
- * The data (optionally compressed) will be in ram, pending a flush to
- * disk (it will stay in ram till the eet file handle is closed though).
- *
- * @see eet_data_undump()
- *
- * @since 1.0.0
- * @ingroup Eet_Data_Cipher_Group
- */
-EAPI int
-eet_data_undump_cipher(Eet_File *ef,
-                       const char *name,
-                       const char *cipher_key,
-                       const char *text,
-                       int textlen,
-                       int compress);
-
-/**
- * Decode a data structure from an arbitrary location in memory
- * using a cipher.
- * @param edd The data  descriptor to use when decoding.
- * @param data_in The pointer to the data to decode into a struct.
- * @param cipher_key The key to use as cipher.
- * @param size_in The size of the data pointed to in bytes.
- * @return NULL on failure, or a valid decoded struct pointer on success.
- *
- * This function will decode a data structure that has been encoded using
- * eet_data_descriptor_encode(), and return a data structure with all its
- * elements filled out, if successful, or NULL on failure.
- *
- * The data to be decoded is stored at the memory pointed to by @p data_in,
- * and is described by the descriptor pointed to by @p edd. The data size is
- * passed in as the value to @p size_in, ande must be greater than 0 to
- * succeed.
- *
- * This function is useful for decoding data structures delivered to the
- * application by means other than an eet file, such as an IPC or socket
- * connection, raw files, shared memory etc.
- *
- * Please see eet_data_read() for more information.
- *
- * @see eet_data_descriptor_decode()
- *
- * @since 1.0.0
- * @ingroup Eet_Data_Cipher_Group
- */
-EAPI void *
-eet_data_descriptor_decode_cipher(Eet_Data_Descriptor *edd,
-                                  const void *data_in,
-                                  const char *cipher_key,
-                                  int size_in);
-
-/**
- * Encode a data struct to memory and return that encoded data
- * using a cipher.
- * @param edd The data  descriptor to use when encoding.
- * @param data_in The pointer to the struct to encode into data.
- * @param cipher_key The key to use as cipher.
- * @param size_ret pointer to the an int to be filled with the decoded size.
- * @return NULL on failure, or a valid encoded data chunk on success.
- *
- * This function takes a data structutre in memory and encodes it into a
- * serialised chunk of data that can be decoded again by
- * eet_data_descriptor_decode(). This is useful for being able to transmit
- * data structures across sockets, pipes, IPC or shared file mechanisms,
- * without having to worry about memory space, machine type, endianess etc.
- *
- * The parameter @p edd must point to a valid data descriptor, and
- * @p data_in must point to the right data structure to encode. If not, the
- * encoding may fail.
- *
- * On success a non NULL valid pointer is returned and what @p size_ret
- * points to is set to the size of this decoded data, in bytes. When the
- * encoded data is no longer needed, call free() on it. On failure NULL is
- * returned and what @p size_ret points to is set to 0.
- *
- * Please see eet_data_write() for more information.
- *
- * @see eet_data_descriptor_encode()
- *
- * @since 1.0.0
- * @ingroup Eet_Data_Cipher_Group
- */
-EAPI void *
-eet_data_descriptor_encode_cipher(Eet_Data_Descriptor *edd,
-                                  const void *data_in,
-                                  const char *cipher_key,
-                                  int *size_ret);
-
-/**
- * @defgroup Eet_Node_Group Low-level Serialization Structures.
- *
- * Functions that create, destroy and manipulate serialization nodes
- * used by @ref Eet_Data_Group.
- *
- * @{
- */
-
-/**
- * @typedef Eet_Node
- * Opaque handle to manage serialization node.
- */
-typedef struct _Eet_Node Eet_Node;
-
-/**
- * @typedef Eet_Node_Data
- * Contains an union that can fit any kind of node.
- */
-typedef struct _Eet_Node_Data Eet_Node_Data;
-
-/**
- * @struct _Eet_Node_Data
- * Contains an union that can fit any kind of node.
- */
-struct _Eet_Node_Data
-{
-   union {
-      char               c;
-      short              s;
-      int                i;
-      long long          l;
-      float              f;
-      double             d;
-      unsigned char      uc;
-      unsigned short     us;
-      unsigned int       ui;
-      unsigned long long ul;
-      const char        *str;
-   } value;
-};
-
-/**
- * @}
- */
-
-/**
- * TODO FIX ME
- * @ingroup Eet_Node_Group
- */
-EAPI Eet_Node *
-eet_node_char_new(const char *name,
-                  char c);
-
-/**
- * TODO FIX ME
- * @ingroup Eet_Node_Group
- */
-EAPI Eet_Node *
-eet_node_short_new(const char *name,
-                   short s);
-
-/**
- * TODO FIX ME
- * @ingroup Eet_Node_Group
- */
-EAPI Eet_Node *
-eet_node_int_new(const char *name,
-                 int i);
-
-/**
- * TODO FIX ME
- * @ingroup Eet_Node_Group
- */
-EAPI Eet_Node *
-eet_node_long_long_new(const char *name,
-                       long long l);
-
-/**
- * TODO FIX ME
- * @ingroup Eet_Node_Group
- */
-EAPI Eet_Node *
-eet_node_float_new(const char *name,
-                   float f);
-
-/**
- * TODO FIX ME
- * @ingroup Eet_Node_Group
- */
-EAPI Eet_Node *
-eet_node_double_new(const char *name,
-                    double d);
-
-/**
- * TODO FIX ME
- * @ingroup Eet_Node_Group
- */
-EAPI Eet_Node *
-eet_node_unsigned_char_new(const char *name,
-                           unsigned char uc);
-
-/**
- * TODO FIX ME
- * @ingroup Eet_Node_Group
- */
-EAPI Eet_Node *
-eet_node_unsigned_short_new(const char *name,
-                            unsigned short us);
-
-/**
- * TODO FIX ME
- * @ingroup Eet_Node_Group
- */
-EAPI Eet_Node *
-eet_node_unsigned_int_new(const char *name,
-                          unsigned int ui);
-
-/**
- * TODO FIX ME
- * @ingroup Eet_Node_Group
- */
-EAPI Eet_Node *
-eet_node_unsigned_long_long_new(const char *name,
-                                unsigned long long l);
-
-/**
- * TODO FIX ME
- * @ingroup Eet_Node_Group
- */
-EAPI Eet_Node *
-eet_node_string_new(const char *name,
-                    const char *str);
-
-/**
- * TODO FIX ME
- * @ingroup Eet_Node_Group
- */
-EAPI Eet_Node *
-eet_node_inlined_string_new(const char *name,
-                            const char *str);
-
-/**
- * TODO FIX ME
- * @ingroup Eet_Node_Group
- */
-EAPI Eet_Node *
-eet_node_null_new(const char *name);
-
-/**
- * TODO FIX ME
- * @ingroup Eet_Node_Group
- */
-EAPI Eet_Node *
-eet_node_list_new(const char *name,
-                  Eina_List *nodes);
-
-/**
- * TODO FIX ME
- * @ingroup Eet_Node_Group
- */
-EAPI Eet_Node *
-eet_node_array_new(const char *name,
-                   int count,
-                   Eina_List *nodes);
-
-/**
- * TODO FIX ME
- * @ingroup Eet_Node_Group
- */
-EAPI Eet_Node *
-eet_node_var_array_new(const char *name,
-                       Eina_List *nodes);
-
-/**
- * TODO FIX ME
- * @ingroup Eet_Node_Group
- */
-EAPI Eet_Node *
-eet_node_hash_new(const char *name,
-                  const char *key,
-                  Eet_Node *node);
-
-/**
- * TODO FIX ME
- * @ingroup Eet_Node_Group
- */
-EAPI Eet_Node *
-eet_node_struct_new(const char *name,
-                    Eina_List *nodes);
-
-/**
- * TODO FIX ME
- * @ingroup Eet_Node_Group
- */
-EAPI Eet_Node *
-eet_node_struct_child_new(const char *parent,
-                          Eet_Node *child);
-
-/**
- * @brief Get a node's child nodes
- * @param node The node
- * @return The first child node which contains a pointer to the
- * next child node and the parent.
- * @since 1.5
- */
-EAPI Eet_Node *
-eet_node_children_get(Eet_Node *node);
-
-/**
- * @brief Get the next node in a list of nodes
- * @param node The node
- * @return A node which contains a pointer to the
- * next child node and the parent.
- * @since 1.5
- */
-EAPI Eet_Node *
-eet_node_next_get(Eet_Node *node);
-
-/**
- * @brief Get the parent node of a node
- * @param node The node
- * @return The parent node of @p node
- * @since 1.5
- */
-EAPI Eet_Node *
-eet_node_parent_get(Eet_Node *node);
-
-/**
- * TODO FIX ME
- * @ingroup Eet_Node_Group
- */
-EAPI void
-eet_node_list_append(Eet_Node *parent,
-                     const char *name,
-                     Eet_Node *child);
-
-/**
- * TODO FIX ME
- * @ingroup Eet_Node_Group
- */
-EAPI void
-eet_node_struct_append(Eet_Node *parent,
-                       const char *name,
-                       Eet_Node *child);
-
-/**
- * TODO FIX ME
- * @ingroup Eet_Node_Group
- */
-EAPI void
-eet_node_hash_add(Eet_Node *parent,
-                  const char *name,
-                  const char *key,
-                  Eet_Node *child);
-
-/**
- * TODO FIX ME
- * @ingroup Eet_Node_Group
- */
-EAPI void
-eet_node_dump(Eet_Node *n,
-              int dumplevel,
-              Eet_Dump_Callback dumpfunc,
-              void *dumpdata);
-
-/**
- * @brief Return the type of a node
- * @param node The node
- * @return The node's type (EET_T_$TYPE)
- * @since 1.5
- */
-EAPI int
-eet_node_type_get(Eet_Node *node);
-
-/**
- * @brief Return the node's data
- * @param node The node
- * @return The data contained in the node
- * @since 1.5
- */
-EAPI Eet_Node_Data *
-eet_node_value_get(Eet_Node *node);
-
-/**
- * TODO FIX ME
- * @ingroup Eet_Node_Group
- */
-EAPI void
-eet_node_del(Eet_Node *n);
-
-/**
- * TODO FIX ME
- * @ingroup Eet_Node_Group
- */
-EAPI void *
-eet_data_node_encode_cipher(Eet_Node *node,
-                            const char *cipher_key,
-                            int *size_ret);
-
-/**
- * TODO FIX ME
- * @ingroup Eet_Node_Group
- */
-EAPI Eet_Node *
-eet_data_node_decode_cipher(const void *data_in,
-                            const char *cipher_key,
-                            int size_in);
-
-/**
- * TODO FIX ME
- * @ingroup Eet_Node_Group
- */
-EAPI Eet_Node *
-eet_data_node_read_cipher(Eet_File *ef,
-                          const char *name,
-                          const char *cipher_key);
-
-/**
- * TODO FIX ME
- * @ingroup Eet_Node_Group
- */
-EAPI int
-eet_data_node_write_cipher(Eet_File *ef,
-                           const char *name,
-                           const char *cipher_key,
-                           Eet_Node *node,
-                           int compress);
-
-/* EXPERIMENTAL: THIS API MAY CHANGE IN THE FUTURE, USE IT ONLY IF YOU KNOW WHAT YOU ARE DOING. */
-
-/**
- * @typedef Eet_Node_Walk
- * Describes how to walk trees of #Eet_Node.
- */
-typedef struct _Eet_Node_Walk Eet_Node_Walk;
-
-typedef void *              (*Eet_Node_Walk_Struct_Alloc_Callback)(const char *type, void *user_data);
-typedef void                (*Eet_Node_Walk_Struct_Add_Callback)(void *parent, const char *name, void *child, void *user_data);
-typedef void *              (*Eet_Node_Walk_Array_Callback)(Eina_Bool variable, const char *name, int count, void *user_data);
-typedef void                (*Eet_Node_Walk_Insert_Callback)(void *array, int index, void *child, void *user_data);
-typedef void *              (*Eet_Node_Walk_List_Callback)(const char *name, void *user_data);
-typedef void                (*Eet_Node_Walk_Append_Callback)(void *list, void *child, void *user_data);
-typedef void *              (*Eet_Node_Walk_Hash_Callback)(void *parent, const char *name, const char *key, void *value, void *user_data);
-typedef void *              (*Eet_Node_Walk_Simple_Callback)(int type, Eet_Node_Data *data, void *user_data);
-
-/**
- * @struct _Eet_Node_Walk
- * Describes how to walk trees of #Eet_Node.
- */
-struct _Eet_Node_Walk
-{
-   Eet_Node_Walk_Struct_Alloc_Callback struct_alloc;
-   Eet_Node_Walk_Struct_Add_Callback   struct_add;
-   Eet_Node_Walk_Array_Callback        array;
-   Eet_Node_Walk_Insert_Callback       insert;
-   Eet_Node_Walk_List_Callback         list;
-   Eet_Node_Walk_Append_Callback       append;
-   Eet_Node_Walk_Hash_Callback         hash;
-   Eet_Node_Walk_Simple_Callback       simple;
-};
-
-EAPI void *
-eet_node_walk(void *parent,
-              const char *name,
-              Eet_Node *root,
-              Eet_Node_Walk *cb,
-              void *user_data);
-
-/*******/
-
-/**
- * @defgroup Eet_Connection_Group Helper function to use eet over a network link
- *
- * Function that reconstruct and prepare packet of @ref Eet_Data_Group to be send.
- *
- */
-
-/**
- * @typedef Eet_Connection
- * Opaque handle to track paquet for a specific connection.
- *
- * @ingroup Eet_Connection_Group
- */
-typedef struct _Eet_Connection Eet_Connection;
-
-/**
- * @typedef Eet_Read_Cb
- * Called back when an @ref Eet_Data_Group has been received completly and could be used.
- *
- * @ingroup Eet_Connection_Group
- */
-typedef Eina_Bool Eet_Read_Cb (const void *eet_data, size_t size, void *user_data);
-
-/**
- * @typedef Eet_Write_Cb
- * Called back when a packet containing @ref Eet_Data_Group data is ready to be send.
- *
- * @ingroup Eet_Connection_Group
- */
-typedef Eina_Bool Eet_Write_Cb (const void *data, size_t size, void *user_data);
-
-/**
- * Instanciate a new connection to track.
- * @param eet_read_cb Function to call when one Eet_Data packet has been fully assemble.
- * @param eet_write_cb Function to call when one Eet_Data packet is ready to be send over the wire.
- * @param user_data Pointer provided to both functions to be used as a context handler.
- * @return NULL on failure, or a valid Eet_Connection handler.
- *
- * For every connection to track you will need a separate Eet_Connection provider.
- *
- * @since 1.2.4
- * @ingroup Eet_Connection_Group
- */
-EAPI Eet_Connection *
-eet_connection_new(Eet_Read_Cb *eet_read_cb,
-                   Eet_Write_Cb *eet_write_cb,
-                   const void *user_data);
-
-/**
- * Process a raw packet received over the link
- * @param conn Connection handler to track.
- * @param data Raw data packet.
- * @param size The size of that packet.
- * @return 0 on complete success, any other value indicate where in the stream it got wrong (It could be before that packet).
- *
- * Every time you receive a packet related to your connection, you should pass
- * it to that function so that it could process and assemble packet has you
- * receive it. It will automatically call Eet_Read_Cb when one is fully received.
- *
- * @since 1.2.4
- * @ingroup Eet_Connection_Group
- */
-EAPI int
-eet_connection_received(Eet_Connection *conn,
-                        const void *data,
-                        size_t size);
-
-/**
- * Convert a complex structure and prepare it to be send.
- * @param conn Connection handler to track.
- * @param edd The data descriptor to use when encoding.
- * @param data_in The pointer to the struct to encode into data.
- * @param cipher_key The key to use as cipher.
- * @return EINA_TRUE if the data where correctly send, EINA_FALSE if they don't.
- *
- * This function serialize data_in with edd, assemble the packet and call
- * Eet_Write_Cb when ready. The data passed Eet_Write_Cb are temporary allocated
- * and will vanish just after the return of the callback.
- *
- * @see eet_data_descriptor_encode_cipher
- *
- * @since 1.2.4
- * @ingroup Eet_Connection_Group
- */
-EAPI Eina_Bool
-eet_connection_send(Eet_Connection *conn,
-                    Eet_Data_Descriptor *edd,
-                    const void *data_in,
-                    const char *cipher_key);
-
-/**
- * Convert a Eet_Node tree and prepare it to be send.
- * @param conn Connection handler to track.
- * @param node The data tree to use when encoding.
- * @param cipher_key The key to use as cipher.
- * @return EINA_TRUE if the data where correctly send, EINA_FALSE if they don't.
- *
- * This function serialize node, assemble the packet and call
- * Eet_Write_Cb when ready. The data passed Eet_Write_Cb are temporary allocated
- * and will vanish just after the return of the callback.
- *
- * @see eet_data_node_encode_cipher
- *
- * @since 1.2.4
- * @ingroup Eet_Connection_Group
- */
-EAPI Eina_Bool
-eet_connection_node_send(Eet_Connection *conn,
-                         Eet_Node *node,
-                         const char *cipher_key);
-
-/**
- * Close a connection and lost its track.
- * @param conn Connection handler to close.
- * @param on_going Signal if a partial packet wasn't completed.
- * @return the user_data passed to both callback.
- *
- * @since 1.2.4
- * @ingroup Eet_Connection_Group
- */
-EAPI void *
-eet_connection_close(Eet_Connection *conn,
-                     Eina_Bool *on_going);
-
-/***************************************************************************/
-
-#ifdef __cplusplus
-}
-#endif /* ifdef __cplusplus */
-
-#endif /* ifndef _EET_H */
diff --git a/libraries/eet/src/lib/Eet_private.h b/libraries/eet/src/lib/Eet_private.h
deleted file mode 100644
index c04daf0..0000000
--- a/libraries/eet/src/lib/Eet_private.h
+++ /dev/null
@@ -1,326 +0,0 @@
-#ifndef _EET_PRIVATE_H
-#define _EET_PRIVATE_H
-
-#include <Eina.h>
-
-typedef enum _Eet_Convert_Type Eet_Convert_Type;
-
-enum _Eet_Convert_Type
-{
-   EET_D_NOTHING       = 0,
-   EET_D_FLOAT         = 1 << 1,
-   EET_D_DOUBLE        = 1 << 2,
-   EET_D_FIXED_POINT   = 1 << 4
-};
-
-typedef struct _Eet_String  Eet_String;
-typedef struct _Eet_Convert Eet_Convert;
-
-struct _Eet_Convert
-{
-   float            f;
-   double           d;
-   Eina_F32p32      fp;
-
-   Eet_Convert_Type type;
-};
-
-struct _Eet_String
-{
-   const char   *str;
-
-   int           len;
-
-   int           next;
-   int           prev;
-
-   unsigned char hash;
-   unsigned char allocated : 1;
-};
-struct _Eet_Dictionary
-{
-   Eet_String *all;
-   Eina_Hash  *converts;
-
-   int         size;
-   int         offset;
-
-   int         hash[256];
-
-   int         count;
-   int         total;
-
-   const char *start;
-   const char *end;
-};
-
-struct _Eet_Node
-{
-   int           type;
-   int           count;
-   const char   *name;
-   const char   *key;
-   Eet_Node     *values;
-   Eet_Node     *next;
-   Eet_Node     *parent;
-   Eet_Node_Data data;
-};
-
-typedef struct _Eet_File_Header    Eet_File_Header;
-typedef struct _Eet_File_Node      Eet_File_Node;
-typedef struct _Eet_File_Directory Eet_File_Directory;
-
-struct _Eet_File
-{
-   const char          *path;
-   Eina_File           *readfp;
-   Eet_File_Header     *header;
-   Eet_Dictionary      *ed;
-   Eet_Key             *key;
-   const unsigned char *data;
-   const void          *x509_der;
-   const void          *signature;
-   void                *sha1;
-
-   Eet_File_Mode        mode;
-
-   int                  magic;
-   int                  references;
-
-   unsigned long int    data_size;
-   int                  x509_length;
-   unsigned int         signature_length;
-   int                  sha1_length;
-
-   Eina_Lock            file_lock;
-
-   unsigned char        writes_pending : 1;
-   unsigned char        delete_me_now : 1;
-};
-
-struct _Eet_File_Header
-{
-   int                 magic;
-   Eet_File_Directory *directory;
-};
-
-struct _Eet_File_Directory
-{
-   int             size;
-   Eet_File_Node **nodes;
-};
-
-struct _Eet_File_Node
-{
-   char             *name;
-   void             *data;
-   Eet_File_Node    *next; /* FIXME: make buckets linked lists */
-
-   unsigned long int offset;
-   unsigned long int dictionary_offset;
-   unsigned long int name_offset;
-
-   unsigned int      name_size;
-   unsigned int      size;
-   unsigned int      data_size;
-
-   unsigned char     free_name : 1;
-   unsigned char     compression : 1;
-   unsigned char     ciphered : 1;
-   unsigned char     alias : 1;
-};
-
-#if 0
-/* Version 2 */
-/* NB: all int's are stored in network byte order on disk */
-/* file format: */
-int magic; /* magic number ie 0x1ee7ff00 */
-int num_directory_entries; /* number of directory entries to follow */
-int bytes_directory_entries; /* bytes of directory entries to follow */
-struct
-{
-   int  offset; /* bytes offset into file for data chunk */
-   int  flags; /* flags - for now 0 = uncompressed and clear, 1 = compressed and clear, 2 = uncompressed and ciphered, 3 = compressed and ciphered */
-   int  size; /* size of the data chunk */
-   int  data_size; /* size of the (uncompressed) data chunk */
-   int  name_size; /* length in bytes of the name field */
-   char name[name_size]; /* name string (variable length) and \0 terminated */
-} directory[num_directory_entries];
-/* and now startes the data stream... */
-#endif /* if 0 */
-
-#if 0
-/* Version 3 */
-/* NB: all int's are stored in network byte order on disk */
-/* file format: */
-int magic; /* magic number ie 0x1ee70f42 */
-int num_directory_entries; /* number of directory entries to follow */
-int num_dictionary_entries; /* number of dictionary entries to follow */
-struct
-{
-   int data_offset; /* bytes offset into file for data chunk */
-   int size; /* size of the data chunk */
-   int data_size; /* size of the (uncompressed) data chunk */
-   int name_offset; /* bytes offset into file for name string */
-   int name_size; /* length in bytes of the name field */
-   int flags; /* bit flags - for now:
-                 bit 0 => compresion on/off
-                 bit 1 => ciphered on/off
-                 bit 2 => alias
-               */
-} directory[num_directory_entries];
-struct
-{
-   int hash;
-   int offset;
-   int size;
-   int prev;
-   int next;
-} dictionary[num_dictionary_entries];
-/* now start the string stream. */
-/* and right after them the data stream. */
-int magic_sign; /* Optional, only if the eet file is signed. */
-int signature_length; /* Signature length. */
-int x509_length; /* Public certificate that signed the file. */
-char signature[signature_length]; /* The signature. */
-char x509[x509_length]; /* The public certificate. */
-#endif /* if 0 */
-
-/*
- * variable and macros used for the eina_log module
- */
-extern int _eet_log_dom_global;
-
-/*
- * Macros that are used everywhere
- *
- * the first four macros are the general macros for the lib
- */
-#ifdef EET_DEFAULT_LOG_COLOR
-# undef EET_DEFAULT_LOG_COLOR
-#endif /* ifdef EET_DEFAULT_LOG_COLOR */
-#define EET_DEFAULT_LOG_COLOR EINA_COLOR_CYAN
-#ifdef ERR
-# undef ERR
-#endif /* ifdef ERR */
-#define ERR(...)  EINA_LOG_DOM_ERR(_eet_log_dom_global, __VA_ARGS__)
-#ifdef DBG
-# undef DBG
-#endif /* ifdef DBG */
-#define DBG(...)  EINA_LOG_DOM_DBG(_eet_log_dom_global, __VA_ARGS__)
-#ifdef INF
-# undef INF
-#endif /* ifdef INF */
-#define INF(...)  EINA_LOG_DOM_INFO(_eet_log_dom_global, __VA_ARGS__)
-#ifdef WRN
-# undef WRN
-#endif /* ifdef WRN */
-#define WRN(...)  EINA_LOG_DOM_WARN(_eet_log_dom_global, __VA_ARGS__)
-#ifdef CRIT
-# undef CRIT
-#endif /* ifdef CRIT */
-#define CRIT(...) EINA_LOG_DOM_CRIT(_eet_log_dom_global, __VA_ARGS__)
-
-Eet_Dictionary *
- eet_dictionary_add(void);
-void
- eet_dictionary_free(Eet_Dictionary *ed);
-int
- eet_dictionary_string_add(Eet_Dictionary *ed,
-                          const char *string);
-int
-eet_dictionary_string_get_size(const Eet_Dictionary *ed,
-                               int index);
-const char *
-eet_dictionary_string_get_char(const Eet_Dictionary *ed,
-                               int index);
-Eina_Bool
-eet_dictionary_string_get_float(const Eet_Dictionary *ed,
-                                int index,
-                                float *result);
-Eina_Bool
-eet_dictionary_string_get_double(const Eet_Dictionary *ed,
-                                 int index,
-                                 double *result);
-Eina_Bool
-eet_dictionary_string_get_fp(const Eet_Dictionary *ed,
-                             int index,
-                             Eina_F32p32 *result);
-int
-eet_dictionary_string_get_hash(const Eet_Dictionary *ed,
-                               int index);
-
-int _eet_hash_gen(const char *key,
-                  int hash_size);
-
-const void *
-eet_identity_check(const void *data_base,
-                   unsigned int data_length,
-                   void **sha1,
-                   int *sha1_length,
-                   const void *signature_base,
-                   unsigned int signature_length,
-                   const void **raw_signature_base,
-                   unsigned int *raw_signature_length,
-                   int *x509_length);
-void *
-eet_identity_compute_sha1(const void *data_base,
-                          unsigned int data_length,
-                          int *sha1_length);
-Eet_Error
-eet_cipher(const void *data,
-           unsigned int size,
-           const char *key,
-           unsigned int length,
-           void **result,
-           unsigned int *result_length);
-Eet_Error
-eet_decipher(const void *data,
-             unsigned int size,
-             const char *key,
-             unsigned int length,
-             void **result,
-             unsigned int *result_length);
-Eet_Error
-eet_identity_sign(FILE *fp,
-                  Eet_Key *key);
-void
- eet_identity_unref(Eet_Key *key);
-void
- eet_identity_ref(Eet_Key *key);
-
-void
- eet_node_shutdown(void);
-int
- eet_node_init(void);
-Eet_Node *
- eet_node_new(void);
-void
- eet_node_free(Eet_Node *node);
-
-
-#define GENERIC_ALLOC_FREE_HEADER(TYPE, Type) \
-  TYPE *Type##_malloc(unsigned int);                  \
-  TYPE *Type##_calloc(unsigned int);                  \
-  void Type##_mp_free(TYPE *e);
-
-GENERIC_ALLOC_FREE_HEADER(Eet_File_Directory, eet_file_directory);
-GENERIC_ALLOC_FREE_HEADER(Eet_File_Node, eet_file_node);
-GENERIC_ALLOC_FREE_HEADER(Eet_File_Header, eet_file_header);
-GENERIC_ALLOC_FREE_HEADER(Eet_Dictionary, eet_dictionary);
-GENERIC_ALLOC_FREE_HEADER(Eet_File, eet_file);
-
-Eina_Bool eet_mempool_init(void);
-void eet_mempool_shutdown(void);
-
-#ifndef PATH_MAX
-# define PATH_MAX 4096
-#endif /* ifndef PATH_MAX */
-
-#ifdef DNDEBUG
-# define EET_ASSERT(Test, Do) if (Test == 0) {Do; }
-#else /* ifdef DNDEBUG */
-# define EET_ASSERT(Test, Do) if (Test == 0) {abort(); }
-#endif /* ifdef DNDEBUG */
-
-#endif /* ifndef _EET_PRIVATE_H */
diff --git a/libraries/eet/src/lib/Makefile.am b/libraries/eet/src/lib/Makefile.am
deleted file mode 100644
index ae60168..0000000
--- a/libraries/eet/src/lib/Makefile.am
+++ /dev/null
@@ -1,163 +0,0 @@
-
-MAINTAINERCLEANFILES = Makefile.in
-
-AM_CPPFLAGS = \
--I. \
--I$(top_srcdir)/src/lib \
--I$(top_builddir)/src/lib \
--DPACKAGE_BIN_DIR=\"$(bindir)\" \
--DPACKAGE_LIB_DIR=\"$(libdir)\" \
--DPACKAGE_DATA_DIR=\"$(datadir)/$(PACKAGE)\" \
-@EVIL_CFLAGS@ \
-@EINA_CFLAGS@ \
-@EET_CPPFLAGS@ \
-@EFL_EET_BUILD@ \
-@EFL_COVERAGE_CFLAGS@ \
-@OPENSSL_CFLAGS@ \
-@GNUTLS_CFLAGS@
-
-includes_HEADERS = Eet.h
-includesdir = $(includedir)/eet-@VMAJ@
-
-lib_LTLIBRARIES = libeet.la
-
-base_sources = \
-eet_alloc.c \
-eet_lib.c \
-eet_data.c \
-eet_image.c \
-eet_cipher.c \
-eet_dictionary.c \
-eet_node.c \
-eet_utils.c \
-eet_connection.c
-
-if EET_AMALGAMATION
-nodist_libeet_la_SOURCES = eet_amalgamation.c
-
-eet_amalgamation.c: $(base_sources) Makefile
-        -rm -f eet_amalgamation.c
-
-        @echo "#ifdef HAVE_CONFIG_H" >> eet_amalgamation.c
-        @echo "# include \"config.h\"" >> eet_amalgamation.c
-        @echo "#endif" >> eet_amalgamation.c
-
-        @echo "#ifdef HAVE_ALLOCA_H" >> eet_amalgamation.c
-        @echo "# include <alloca.h>" >> eet_amalgamation.c
-        @echo "#elif defined __GNUC__" >> eet_amalgamation.c
-        @echo "# define alloca __builtin_alloca" >> eet_amalgamation.c
-        @echo "#elif defined _AIX" >> eet_amalgamation.c
-        @echo "# define alloca __alloca" >> eet_amalgamation.c
-        @echo "#elif defined _MSC_VER" >> eet_amalgamation.c
-        @echo "# include <malloc.h>" >> eet_amalgamation.c
-        @echo "# define alloca _alloca" >> eet_amalgamation.c
-        @echo "#else" >> eet_amalgamation.c
-        @echo "# include <stddef.h>" >> eet_amalgamation.c
-        @echo "# ifdef __cplusplus" >> eet_amalgamation.c
-        @echo "#extern \"C\"" >> eet_amalgamation.c
-        @echo "# endif" >> eet_amalgamation.c
-        @echo "#void *alloca (size_t);" >> eet_amalgamation.c
-        @echo "#endif" >> eet_amalgamation.c
-
-        @echo "#include <stdio.h>" >> eet_amalgamation.c
-        @echo "#include <string.h>" >> eet_amalgamation.c
-        @echo "#include <math.h>" >> eet_amalgamation.c
-        @echo "#include <ctype.h>" >> eet_amalgamation.c
-        @echo "#include <limits.h>" >> eet_amalgamation.c
-        @echo "#include <sys/types.h>" >> eet_amalgamation.c
-        @echo "#include <sys/stat.h>" >> eet_amalgamation.c
-        @echo "#ifdef HAVE_SIGNATURE" >> eet_amalgamation.c
-        @echo "# include <sys/mman.h>" >> eet_amalgamation.c
-        @echo "#endif" >> eet_amalgamation.c
-        @echo "#include <setjmp.h>" >> eet_amalgamation.c
-        @echo "#include <errno.h>" >> eet_amalgamation.c
-        @echo "#include <time.h>" >> eet_amalgamation.c
-        @echo "#include <fnmatch.h>" >> eet_amalgamation.c
-        @echo "#include <fcntl.h>" >> eet_amalgamation.c
-
-        @echo "#ifdef _WIN32" >> eet_amalgamation.c
-        @echo "# include <winsock2.h>" >> eet_amalgamation.c
-        @echo "#endif" >> eet_amalgamation.c
-
-        @echo "#ifndef _MSC_VER" >> eet_amalgamation.c
-        @echo "# include <unistd.h>" >> eet_amalgamation.c
-        @echo "#endif" >> eet_amalgamation.c
-
-        @echo "#ifdef HAVE_NETINET_IN_H" >> eet_amalgamation.c
-        @echo "# include <netinet/in.h>" >> eet_amalgamation.c
-        @echo "#endif" >> eet_amalgamation.c
-
-        @echo "#ifdef HAVE_GNUTLS" >> eet_amalgamation.c
-        @echo "# include <gnutls/gnutls.h>" >> eet_amalgamation.c
-        @echo "# include <gcrypt.h>" >> eet_amalgamation.c
-        @echo "#endif" >> eet_amalgamation.c
-
-        @echo "#ifdef HAVE_OPENSSL" >> eet_amalgamation.c
-        @echo "# include <openssl/err.h>" >> eet_amalgamation.c
-        @echo "# include <openssl/evp.h>" >> eet_amalgamation.c
-        @echo "# include <openssl/sha.h>" >> eet_amalgamation.c
-        @echo "#endif" >> eet_amalgamation.c
-
-        @echo "#ifdef HAVE_SIGNATURE" >> eet_amalgamation.c
-        @echo "# ifdef HAVE_GNUTLS" >> eet_amalgamation.c
-        @echo "#  include <gnutls/gnutls.h>" >> eet_amalgamation.c
-        @echo "#  include <gnutls/x509.h>" >> eet_amalgamation.c
-        @echo "# else" >> eet_amalgamation.c
-        @echo "#  include <openssl/rsa.h>" >> eet_amalgamation.c
-        @echo "#  include <openssl/objects.h>" >> eet_amalgamation.c
-        @echo "#  include <openssl/err.h>" >> eet_amalgamation.c
-        @echo "#  include <openssl/ssl.h>" >> eet_amalgamation.c
-        @echo "#  include <openssl/dh.h>" >> eet_amalgamation.c
-        @echo "#  include <openssl/dsa.h>" >> eet_amalgamation.c
-        @echo "#  include <openssl/evp.h>" >> eet_amalgamation.c
-        @echo "#  include <openssl/x509.h>" >> eet_amalgamation.c
-        @echo "#  include <openssl/pem.h>" >> eet_amalgamation.c
-        @echo "# endif" >> eet_amalgamation.c
-        @echo "#endif" >> eet_amalgamation.c
-
-        @echo "#ifdef HAVE_CIPHER" >> eet_amalgamation.c
-        @echo "# ifdef HAVE_GNUTLS" >> eet_amalgamation.c
-        @echo "#  include <gnutls/x509.h>" >> eet_amalgamation.c
-        @echo "#  include <gcrypt.h>" >> eet_amalgamation.c
-        @echo "# else" >> eet_amalgamation.c
-        @echo "#  include <openssl/evp.h>" >> eet_amalgamation.c
-        @echo "#  include <openssl/hmac.h>" >> eet_amalgamation.c
-        @echo "#  include <openssl/rand.h>" >> eet_amalgamation.c
-        @echo "# endif" >> eet_amalgamation.c
-        @echo "#endif" >> eet_amalgamation.c
-
-        @echo "#include <zlib.h>" >> eet_amalgamation.c
-        @echo "#include <jpeglib.h>" >> eet_amalgamation.c
-
-        @echo "#ifdef HAVE_EVIL" >> eet_amalgamation.c
-        @echo "# include <Evil.h>" >> eet_amalgamation.c
-        @echo "#endif" >> eet_amalgamation.c
-
-        @echo "#include <Eet.h>" >> eet_amalgamation.c
-
-        @echo "#include \"Eet_private.h\"" >> eet_amalgamation.c
-        @echo "#include \"Eet.h\"" >> eet_amalgamation.c
-
-        @for f in $(base_sources); do \
-           if [ `echo $$f | sed -e 's/^...\(.\).*/\1/'` != '/' ]; then \
-                  file="$(srcdir)/$$f" ; \
-           else \
-                  file="$$f" ; \
-           fi ; \
-           echo "/* file: $$file */" >> eet_amalgamation.c; \
-           grep -v -e '^# *include \+.\(config\|\|Evil\|Eina\|stdio\|string\|math\|ctype\|limits\|sys/types\|sys/stat\|sys/mman\|setjmp\|errno\|time\|fnmatch\|fcntl\|winsock2\|unistd\|netinet/in\|gnutls/gnutls\|gcrypt\|gnutls/x509\|openssl/rsa\|openssl/objects\|openssl/err\|openssl/ssl\|openssl/dh\|openssl/dsa\|openssl/evp\|openssl/pem\|openssl/sha\|openssl/hmac\|openssl/x509\|openssl/rand\|zlib\|jpeglib\|Eet_private\|Eet\)[.]h.*' $$file >> eet_amalgamation.c; \
-        done
-        @echo "eet_amalgamation.c generated"
-
-else
-libeet_la_SOURCES = $(base_sources)
-endif
-
-libeet_la_CFLAGS = @EET_CFLAGS@ @DEBUG_CFLAGS@
-libeet_la_LIBADD = @GNUTLS_LIBS@ @OPENSSL_LIBS@ @EFL_COVERAGE_LIBS@ @EET_LIBS@ @EINA_LIBS@ @EVIL_LIBS@ -lz -ljpeg -lm
-libeet_la_LDFLAGS = -no-undefined @lt_enable_auto_import@ -version-info @version_info@ @release_info@
-
-EXTRA_DIST = Eet_private.h
-
-clean-local:
-        @rm -rf *.gcno eet_amalgamation.c
diff --git a/libraries/eet/src/lib/Makefile.in b/libraries/eet/src/lib/Makefile.in
deleted file mode 100644
index c0367b3..0000000
--- a/libraries/eet/src/lib/Makefile.in
+++ /dev/null
@@ -1,859 +0,0 @@
-# Makefile.in generated by automake 1.11.1 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
-# Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-
-VPATH = @srcdir@
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-subdir = src/lib
-DIST_COMMON = $(includes_HEADERS) $(srcdir)/Makefile.am \
-        $(srcdir)/Makefile.in
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/ac_attribute.m4 \
-        $(top_srcdir)/m4/ac_path_generic.m4 \
-        $(top_srcdir)/m4/efl_binary.m4 \
-        $(top_srcdir)/m4/efl_compiler_flag.m4 \
-        $(top_srcdir)/m4/efl_coverage.m4 \
-        $(top_srcdir)/m4/efl_doxygen.m4 \
-        $(top_srcdir)/m4/efl_fnmatch.m4 \
-        $(top_srcdir)/m4/efl_path_max.m4 $(top_srcdir)/m4/efl_tests.m4 \
-        $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
-        $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
-        $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-        $(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/config.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
-    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
-    *) f=$$p;; \
-  esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
-  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
-  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
-  for p in $$list; do echo "$$p $$p"; done | \
-  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
-  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
-    if (++n[$$2] == $(am__install_max)) \
-      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
-    END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
-  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
-  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__installdirs = "$(DESTDIR)$(libdir)" "$(DESTDIR)$(includesdir)"
-LTLIBRARIES = $(lib_LTLIBRARIES)
-libeet_la_DEPENDENCIES =
-am__libeet_la_SOURCES_DIST = eet_alloc.c eet_lib.c eet_data.c \
-        eet_image.c eet_cipher.c eet_dictionary.c eet_node.c \
-        eet_utils.c eet_connection.c
-am__objects_1 = libeet_la-eet_alloc.lo libeet_la-eet_lib.lo \
-        libeet_la-eet_data.lo libeet_la-eet_image.lo \
-        libeet_la-eet_cipher.lo libeet_la-eet_dictionary.lo \
-        libeet_la-eet_node.lo libeet_la-eet_utils.lo \
-        libeet_la-eet_connection.lo
-@EET_AMALGAMATION_FALSE@am_libeet_la_OBJECTS = $(am__objects_1)
-@EET_AMALGAMATION_TRUE@nodist_libeet_la_OBJECTS =  \
-@EET_AMALGAMATION_TRUE@ libeet_la-eet_amalgamation.lo
-libeet_la_OBJECTS = $(am_libeet_la_OBJECTS) \
-        $(nodist_libeet_la_OBJECTS)
-AM_V_lt = $(am__v_lt_$(V))
-am__v_lt_ = $(am__v_lt_$(AM_DEFAULT_VERBOSITY))
-am__v_lt_0 = --silent
-libeet_la_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
-        $(LIBTOOLFLAGS) --mode=link $(CCLD) $(libeet_la_CFLAGS) \
-        $(CFLAGS) $(libeet_la_LDFLAGS) $(LDFLAGS) -o $@
-DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)
-depcomp = $(SHELL) $(top_srcdir)/depcomp
-am__depfiles_maybe = depfiles
-am__mv = mv -f
-COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
-        $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
-        $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \
-        $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
-        $(AM_CFLAGS) $(CFLAGS)
-AM_V_CC = $(am__v_CC_$(V))
-am__v_CC_ = $(am__v_CC_$(AM_DEFAULT_VERBOSITY))
-am__v_CC_0 = @echo "  CC    " $@;
-AM_V_at = $(am__v_at_$(V))
-am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
-am__v_at_0 = @
-CCLD = $(CC)
-LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
-        $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
-        $(AM_LDFLAGS) $(LDFLAGS) -o $@
-AM_V_CCLD = $(am__v_CCLD_$(V))
-am__v_CCLD_ = $(am__v_CCLD_$(AM_DEFAULT_VERBOSITY))
-am__v_CCLD_0 = @echo "  CCLD  " $@;
-AM_V_GEN = $(am__v_GEN_$(V))
-am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
-am__v_GEN_0 = @echo "  GEN   " $@;
-SOURCES = $(libeet_la_SOURCES) $(nodist_libeet_la_SOURCES)
-DIST_SOURCES = $(am__libeet_la_SOURCES_DIST)
-HEADERS = $(includes_HEADERS)
-ETAGS = etags
-CTAGS = ctags
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-ALLOCA = @ALLOCA@
-AMTAR = @AMTAR@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AR = @AR@
-AS = @AS@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CHECK_CFLAGS = @CHECK_CFLAGS@
-CHECK_LIBS = @CHECK_LIBS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEBUG_CFLAGS = @DEBUG_CFLAGS@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DLLTOOL = @DLLTOOL@
-DSYMUTIL = @DSYMUTIL@
-DUMPBIN = @DUMPBIN@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EET_CFLAGS = @EET_CFLAGS@
-EET_CPPFLAGS = @EET_CPPFLAGS@
-EET_LIBS = @EET_LIBS@
-EET_PRG = @EET_PRG@
-EFL_COVERAGE_CFLAGS = @EFL_COVERAGE_CFLAGS@
-EFL_COVERAGE_LIBS = @EFL_COVERAGE_LIBS@
-EFL_EET_BUILD = @EFL_EET_BUILD@
-EFL_FNMATCH_LIBS = @EFL_FNMATCH_LIBS@
-EGREP = @EGREP@
-EINA_CFLAGS = @EINA_CFLAGS@
-EINA_LIBS = @EINA_LIBS@
-EVIL_CFLAGS = @EVIL_CFLAGS@
-EVIL_LIBS = @EVIL_LIBS@
-EXEEXT = @EXEEXT@
-EXOTIC_CFLAGS = @EXOTIC_CFLAGS@
-EXOTIC_LIBS = @EXOTIC_LIBS@
-FGREP = @FGREP@
-GNUTLS_CFLAGS = @GNUTLS_CFLAGS@
-GNUTLS_LIBS = @GNUTLS_LIBS@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-LD = @LD@
-LDFLAGS = @LDFLAGS@
-LIBGCRYPT_CFLAGS = @LIBGCRYPT_CFLAGS@
-LIBGCRYPT_CONFIG = @LIBGCRYPT_CONFIG@
-LIBGCRYPT_LIBS = @LIBGCRYPT_LIBS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LIPO = @LIPO@
-LN_S = @LN_S@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-MKDIR_P = @MKDIR_P@
-NM = @NM@
-NMEDIT = @NMEDIT@
-OBJDUMP = @OBJDUMP@
-OBJEXT = @OBJEXT@
-OPENSSL_CFLAGS = @OPENSSL_CFLAGS@
-OPENSSL_LIBS = @OPENSSL_LIBS@
-OTOOL = @OTOOL@
-OTOOL64 = @OTOOL64@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-PKG_CONFIG = @PKG_CONFIG@
-PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
-PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
-RANLIB = @RANLIB@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-STRIP = @STRIP@
-VERSION = @VERSION@
-VMAJ = @VMAJ@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-efl_doxygen = @efl_doxygen@
-efl_have_doxygen = @efl_have_doxygen@
-exec_prefix = @exec_prefix@
-have_lcov = @have_lcov@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-lt_ECHO = @lt_ECHO@
-lt_enable_auto_import = @lt_enable_auto_import@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-pkgconfig_requires_private = @pkgconfig_requires_private@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-release_info = @release_info@
-requirement_eet = @requirement_eet@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-version_info = @version_info@
-MAINTAINERCLEANFILES = Makefile.in
-AM_CPPFLAGS = \
--I. \
--I$(top_srcdir)/src/lib \
--I$(top_builddir)/src/lib \
--DPACKAGE_BIN_DIR=\"$(bindir)\" \
--DPACKAGE_LIB_DIR=\"$(libdir)\" \
--DPACKAGE_DATA_DIR=\"$(datadir)/$(PACKAGE)\" \
-@EVIL_CFLAGS@ \
-@EINA_CFLAGS@ \
-@EET_CPPFLAGS@ \
-@EFL_EET_BUILD@ \
-@EFL_COVERAGE_CFLAGS@ \
-@OPENSSL_CFLAGS@ \
-@GNUTLS_CFLAGS@
-
-includes_HEADERS = Eet.h
-includesdir = $(includedir)/eet-@VMAJ@
-lib_LTLIBRARIES = libeet.la
-base_sources = \
-eet_alloc.c \
-eet_lib.c \
-eet_data.c \
-eet_image.c \
-eet_cipher.c \
-eet_dictionary.c \
-eet_node.c \
-eet_utils.c \
-eet_connection.c
-
-@EET_AMALGAMATION_TRUE@nodist_libeet_la_SOURCES = eet_amalgamation.c
-@EET_AMALGAMATION_FALSE@libeet_la_SOURCES = $(base_sources)
-libeet_la_CFLAGS = @EET_CFLAGS@ @DEBUG_CFLAGS@
-libeet_la_LIBADD = @GNUTLS_LIBS@ @OPENSSL_LIBS@ @EFL_COVERAGE_LIBS@ @EET_LIBS@ @EINA_LIBS@ @EVIL_LIBS@ -lz -ljpeg -lm
-libeet_la_LDFLAGS = -no-undefined @lt_enable_auto_import@ -version-info @version_info@ @release_info@
-EXTRA_DIST = Eet_private.h
-all: all-am
-
-.SUFFIXES:
-.SUFFIXES: .c .lo .o .obj
-$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
-        @for dep in $?; do \
-          case '$(am__configure_deps)' in \
-            *$$dep*) \
-              ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
-                && { if test -f $@; then exit 0; else break; fi; }; \
-              exit 1;; \
-          esac; \
-        done; \
-        echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu src/lib/Makefile'; \
-        $(am__cd) $(top_srcdir) && \
-          $(AUTOMAKE) --gnu src/lib/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-        @case '$?' in \
-          *config.status*) \
-            cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
-          *) \
-            echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
-            cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
-        esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-        cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure:  $(am__configure_deps)
-        cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
-        cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-install-libLTLIBRARIES: $(lib_LTLIBRARIES)
-        @$(NORMAL_INSTALL)
-        test -z "$(libdir)" || $(MKDIR_P) "$(DESTDIR)$(libdir)"
-        @list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \
-        list2=; for p in $$list; do \
-          if test -f $$p; then \
-            list2="$$list2 $$p"; \
-          else :; fi; \
-        done; \
-        test -z "$$list2" || { \
-          echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(libdir)'"; \
-          $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(libdir)"; \
-        }
-
-uninstall-libLTLIBRARIES:
-        @$(NORMAL_UNINSTALL)
-        @list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \
-        for p in $$list; do \
-          $(am__strip_dir) \
-          echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$f'"; \
-          $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$f"; \
-        done
-
-clean-libLTLIBRARIES:
-        -test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES)
-        @list='$(lib_LTLIBRARIES)'; for p in $$list; do \
-          dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \
-          test "$$dir" != "$$p" || dir=.; \
-          echo "rm -f \"$${dir}/so_locations\""; \
-          rm -f "$${dir}/so_locations"; \
-        done
-libeet.la: $(libeet_la_OBJECTS) $(libeet_la_DEPENDENCIES) 
-        $(AM_V_CCLD)$(libeet_la_LINK) -rpath $(libdir) $(libeet_la_OBJECTS) $(libeet_la_LIBADD) $(LIBS)
-
-mostlyclean-compile:
-        -rm -f *.$(OBJEXT)
-
-distclean-compile:
-        -rm -f *.tab.c
-
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libeet_la-eet_alloc.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libeet_la-eet_amalgamation.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libeet_la-eet_cipher.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libeet_la-eet_connection.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libeet_la-eet_data.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libeet_la-eet_dictionary.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libeet_la-eet_image.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libeet_la-eet_lib.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libeet_la-eet_node.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libeet_la-eet_utils.Plo@am__quote@
-
-.c.o:
-@am__fastdepCC_TRUE@    $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@    $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@am__fastdepCC_FALSE@   $(AM_V_CC) @AM_BACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@       source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@       DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@   $(COMPILE) -c $<
-
-.c.obj:
-@am__fastdepCC_TRUE@    $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@    $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@am__fastdepCC_FALSE@   $(AM_V_CC) @AM_BACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@       source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@       DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@   $(COMPILE) -c `$(CYGPATH_W) '$<'`
-
-.c.lo:
-@am__fastdepCC_TRUE@    $(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@    $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
-@am__fastdepCC_FALSE@   $(AM_V_CC) @AM_BACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@       source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@       DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@   $(LTCOMPILE) -c -o $@ $<
-
-libeet_la-eet_alloc.lo: eet_alloc.c
-@am__fastdepCC_TRUE@    $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libeet_la_CFLAGS) $(CFLAGS) -MT libeet_la-eet_alloc.lo -MD -MP -MF $(DEPDIR)/libeet_la-eet_alloc.Tpo -c -o libeet_la-eet_alloc.lo `test -f 'eet_alloc.c' || echo '$(srcdir)/'`eet_alloc.c
-@am__fastdepCC_TRUE@    $(AM_V_at)$(am__mv) $(DEPDIR)/libeet_la-eet_alloc.Tpo $(DEPDIR)/libeet_la-eet_alloc.Plo
-@am__fastdepCC_FALSE@   $(AM_V_CC) @AM_BACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@       source='eet_alloc.c' object='libeet_la-eet_alloc.lo' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@       DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@   $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libeet_la_CFLAGS) $(CFLAGS) -c -o libeet_la-eet_alloc.lo `test -f 'eet_alloc.c' || echo '$(srcdir)/'`eet_alloc.c
-
-libeet_la-eet_lib.lo: eet_lib.c
-@am__fastdepCC_TRUE@    $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libeet_la_CFLAGS) $(CFLAGS) -MT libeet_la-eet_lib.lo -MD -MP -MF $(DEPDIR)/libeet_la-eet_lib.Tpo -c -o libeet_la-eet_lib.lo `test -f 'eet_lib.c' || echo '$(srcdir)/'`eet_lib.c
-@am__fastdepCC_TRUE@    $(AM_V_at)$(am__mv) $(DEPDIR)/libeet_la-eet_lib.Tpo $(DEPDIR)/libeet_la-eet_lib.Plo
-@am__fastdepCC_FALSE@   $(AM_V_CC) @AM_BACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@       source='eet_lib.c' object='libeet_la-eet_lib.lo' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@       DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@   $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libeet_la_CFLAGS) $(CFLAGS) -c -o libeet_la-eet_lib.lo `test -f 'eet_lib.c' || echo '$(srcdir)/'`eet_lib.c
-
-libeet_la-eet_data.lo: eet_data.c
-@am__fastdepCC_TRUE@    $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libeet_la_CFLAGS) $(CFLAGS) -MT libeet_la-eet_data.lo -MD -MP -MF $(DEPDIR)/libeet_la-eet_data.Tpo -c -o libeet_la-eet_data.lo `test -f 'eet_data.c' || echo '$(srcdir)/'`eet_data.c
-@am__fastdepCC_TRUE@    $(AM_V_at)$(am__mv) $(DEPDIR)/libeet_la-eet_data.Tpo $(DEPDIR)/libeet_la-eet_data.Plo
-@am__fastdepCC_FALSE@   $(AM_V_CC) @AM_BACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@       source='eet_data.c' object='libeet_la-eet_data.lo' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@       DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@   $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libeet_la_CFLAGS) $(CFLAGS) -c -o libeet_la-eet_data.lo `test -f 'eet_data.c' || echo '$(srcdir)/'`eet_data.c
-
-libeet_la-eet_image.lo: eet_image.c
-@am__fastdepCC_TRUE@    $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libeet_la_CFLAGS) $(CFLAGS) -MT libeet_la-eet_image.lo -MD -MP -MF $(DEPDIR)/libeet_la-eet_image.Tpo -c -o libeet_la-eet_image.lo `test -f 'eet_image.c' || echo '$(srcdir)/'`eet_image.c
-@am__fastdepCC_TRUE@    $(AM_V_at)$(am__mv) $(DEPDIR)/libeet_la-eet_image.Tpo $(DEPDIR)/libeet_la-eet_image.Plo
-@am__fastdepCC_FALSE@   $(AM_V_CC) @AM_BACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@       source='eet_image.c' object='libeet_la-eet_image.lo' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@       DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@   $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libeet_la_CFLAGS) $(CFLAGS) -c -o libeet_la-eet_image.lo `test -f 'eet_image.c' || echo '$(srcdir)/'`eet_image.c
-
-libeet_la-eet_cipher.lo: eet_cipher.c
-@am__fastdepCC_TRUE@    $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libeet_la_CFLAGS) $(CFLAGS) -MT libeet_la-eet_cipher.lo -MD -MP -MF $(DEPDIR)/libeet_la-eet_cipher.Tpo -c -o libeet_la-eet_cipher.lo `test -f 'eet_cipher.c' || echo '$(srcdir)/'`eet_cipher.c
-@am__fastdepCC_TRUE@    $(AM_V_at)$(am__mv) $(DEPDIR)/libeet_la-eet_cipher.Tpo $(DEPDIR)/libeet_la-eet_cipher.Plo
-@am__fastdepCC_FALSE@   $(AM_V_CC) @AM_BACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@       source='eet_cipher.c' object='libeet_la-eet_cipher.lo' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@       DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@   $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libeet_la_CFLAGS) $(CFLAGS) -c -o libeet_la-eet_cipher.lo `test -f 'eet_cipher.c' || echo '$(srcdir)/'`eet_cipher.c
-
-libeet_la-eet_dictionary.lo: eet_dictionary.c
-@am__fastdepCC_TRUE@    $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libeet_la_CFLAGS) $(CFLAGS) -MT libeet_la-eet_dictionary.lo -MD -MP -MF $(DEPDIR)/libeet_la-eet_dictionary.Tpo -c -o libeet_la-eet_dictionary.lo `test -f 'eet_dictionary.c' || echo '$(srcdir)/'`eet_dictionary.c
-@am__fastdepCC_TRUE@    $(AM_V_at)$(am__mv) $(DEPDIR)/libeet_la-eet_dictionary.Tpo $(DEPDIR)/libeet_la-eet_dictionary.Plo
-@am__fastdepCC_FALSE@   $(AM_V_CC) @AM_BACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@       source='eet_dictionary.c' object='libeet_la-eet_dictionary.lo' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@       DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@   $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libeet_la_CFLAGS) $(CFLAGS) -c -o libeet_la-eet_dictionary.lo `test -f 'eet_dictionary.c' || echo '$(srcdir)/'`eet_dictionary.c
-
-libeet_la-eet_node.lo: eet_node.c
-@am__fastdepCC_TRUE@    $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libeet_la_CFLAGS) $(CFLAGS) -MT libeet_la-eet_node.lo -MD -MP -MF $(DEPDIR)/libeet_la-eet_node.Tpo -c -o libeet_la-eet_node.lo `test -f 'eet_node.c' || echo '$(srcdir)/'`eet_node.c
-@am__fastdepCC_TRUE@    $(AM_V_at)$(am__mv) $(DEPDIR)/libeet_la-eet_node.Tpo $(DEPDIR)/libeet_la-eet_node.Plo
-@am__fastdepCC_FALSE@   $(AM_V_CC) @AM_BACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@       source='eet_node.c' object='libeet_la-eet_node.lo' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@       DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@   $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libeet_la_CFLAGS) $(CFLAGS) -c -o libeet_la-eet_node.lo `test -f 'eet_node.c' || echo '$(srcdir)/'`eet_node.c
-
-libeet_la-eet_utils.lo: eet_utils.c
-@am__fastdepCC_TRUE@    $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libeet_la_CFLAGS) $(CFLAGS) -MT libeet_la-eet_utils.lo -MD -MP -MF $(DEPDIR)/libeet_la-eet_utils.Tpo -c -o libeet_la-eet_utils.lo `test -f 'eet_utils.c' || echo '$(srcdir)/'`eet_utils.c
-@am__fastdepCC_TRUE@    $(AM_V_at)$(am__mv) $(DEPDIR)/libeet_la-eet_utils.Tpo $(DEPDIR)/libeet_la-eet_utils.Plo
-@am__fastdepCC_FALSE@   $(AM_V_CC) @AM_BACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@       source='eet_utils.c' object='libeet_la-eet_utils.lo' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@       DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@   $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libeet_la_CFLAGS) $(CFLAGS) -c -o libeet_la-eet_utils.lo `test -f 'eet_utils.c' || echo '$(srcdir)/'`eet_utils.c
-
-libeet_la-eet_connection.lo: eet_connection.c
-@am__fastdepCC_TRUE@    $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libeet_la_CFLAGS) $(CFLAGS) -MT libeet_la-eet_connection.lo -MD -MP -MF $(DEPDIR)/libeet_la-eet_connection.Tpo -c -o libeet_la-eet_connection.lo `test -f 'eet_connection.c' || echo '$(srcdir)/'`eet_connection.c
-@am__fastdepCC_TRUE@    $(AM_V_at)$(am__mv) $(DEPDIR)/libeet_la-eet_connection.Tpo $(DEPDIR)/libeet_la-eet_connection.Plo
-@am__fastdepCC_FALSE@   $(AM_V_CC) @AM_BACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@       source='eet_connection.c' object='libeet_la-eet_connection.lo' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@       DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@   $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libeet_la_CFLAGS) $(CFLAGS) -c -o libeet_la-eet_connection.lo `test -f 'eet_connection.c' || echo '$(srcdir)/'`eet_connection.c
-
-libeet_la-eet_amalgamation.lo: eet_amalgamation.c
-@am__fastdepCC_TRUE@    $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libeet_la_CFLAGS) $(CFLAGS) -MT libeet_la-eet_amalgamation.lo -MD -MP -MF $(DEPDIR)/libeet_la-eet_amalgamation.Tpo -c -o libeet_la-eet_amalgamation.lo `test -f 'eet_amalgamation.c' || echo '$(srcdir)/'`eet_amalgamation.c
-@am__fastdepCC_TRUE@    $(AM_V_at)$(am__mv) $(DEPDIR)/libeet_la-eet_amalgamation.Tpo $(DEPDIR)/libeet_la-eet_amalgamation.Plo
-@am__fastdepCC_FALSE@   $(AM_V_CC) @AM_BACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@       source='eet_amalgamation.c' object='libeet_la-eet_amalgamation.lo' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@       DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@   $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libeet_la_CFLAGS) $(CFLAGS) -c -o libeet_la-eet_amalgamation.lo `test -f 'eet_amalgamation.c' || echo '$(srcdir)/'`eet_amalgamation.c
-
-mostlyclean-libtool:
-        -rm -f *.lo
-
-clean-libtool:
-        -rm -rf .libs _libs
-install-includesHEADERS: $(includes_HEADERS)
-        @$(NORMAL_INSTALL)
-        test -z "$(includesdir)" || $(MKDIR_P) "$(DESTDIR)$(includesdir)"
-        @list='$(includes_HEADERS)'; test -n "$(includesdir)" || list=; \
-        for p in $$list; do \
-          if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-          echo "$$d$$p"; \
-        done | $(am__base_list) | \
-        while read files; do \
-          echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(includesdir)'"; \
-          $(INSTALL_HEADER) $$files "$(DESTDIR)$(includesdir)" || exit $$?; \
-        done
-
-uninstall-includesHEADERS:
-        @$(NORMAL_UNINSTALL)
-        @list='$(includes_HEADERS)'; test -n "$(includesdir)" || list=; \
-        files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
-        test -n "$$files" || exit 0; \
-        echo " ( cd '$(DESTDIR)$(includesdir)' && rm -f" $$files ")"; \
-        cd "$(DESTDIR)$(includesdir)" && rm -f $$files
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
-        list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
-        unique=`for i in $$list; do \
-            if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-          done | \
-          $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-              END { if (nonempty) { for (i in files) print i; }; }'`; \
-        mkid -fID $$unique
-tags: TAGS
-
-TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
-                $(TAGS_FILES) $(LISP)
-        set x; \
-        here=`pwd`; \
-        list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
-        unique=`for i in $$list; do \
-            if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-          done | \
-          $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-              END { if (nonempty) { for (i in files) print i; }; }'`; \
-        shift; \
-        if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
-          test -n "$$unique" || unique=$$empty_fix; \
-          if test $$# -gt 0; then \
-            $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-              "$$@" $$unique; \
-          else \
-            $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-              $$unique; \
-          fi; \
-        fi
-ctags: CTAGS
-CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
-                $(TAGS_FILES) $(LISP)
-        list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
-        unique=`for i in $$list; do \
-            if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-          done | \
-          $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-              END { if (nonempty) { for (i in files) print i; }; }'`; \
-        test -z "$(CTAGS_ARGS)$$unique" \
-          || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-             $$unique
-
-GTAGS:
-        here=`$(am__cd) $(top_builddir) && pwd` \
-          && $(am__cd) $(top_srcdir) \
-          && gtags -i $(GTAGS_ARGS) "$$here"
-
-distclean-tags:
-        -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-distdir: $(DISTFILES)
-        @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-        topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-        list='$(DISTFILES)'; \
-          dist_files=`for file in $$list; do echo $$file; done | \
-          sed -e "s|^$$srcdirstrip/||;t" \
-              -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
-        case $$dist_files in \
-          */*) $(MKDIR_P) `echo "$$dist_files" | \
-                           sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
-                           sort -u` ;; \
-        esac; \
-        for file in $$dist_files; do \
-          if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-          if test -d $$d/$$file; then \
-            dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
-            if test -d "$(distdir)/$$file"; then \
-              find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-            fi; \
-            if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-              cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
-              find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-            fi; \
-            cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
-          else \
-            test -f "$(distdir)/$$file" \
-            || cp -p $$d/$$file "$(distdir)/$$file" \
-            || exit 1; \
-          fi; \
-        done
-check-am: all-am
-check: check-am
-all-am: Makefile $(LTLIBRARIES) $(HEADERS)
-installdirs:
-        for dir in "$(DESTDIR)$(libdir)" "$(DESTDIR)$(includesdir)"; do \
-          test -z "$$dir" || $(MKDIR_P) "$$dir"; \
-        done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
-        @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
-        $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-          install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-          `test -z '$(STRIP)' || \
-            echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-        -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-        -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
-        @echo "This command is intended for maintainers to use"
-        @echo "it deletes files that may require special tools to rebuild."
-        -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
-clean: clean-am
-
-clean-am: clean-generic clean-libLTLIBRARIES clean-libtool clean-local \
-        mostlyclean-am
-
-distclean: distclean-am
-        -rm -rf ./$(DEPDIR)
-        -rm -f Makefile
-distclean-am: clean-am distclean-compile distclean-generic \
-        distclean-tags
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am: install-includesHEADERS
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am: install-libLTLIBRARIES
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man:
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
-        -rm -rf ./$(DEPDIR)
-        -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-compile mostlyclean-generic \
-        mostlyclean-libtool
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-includesHEADERS uninstall-libLTLIBRARIES
-
-.MAKE: install-am install-strip
-
-.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \
-        clean-libLTLIBRARIES clean-libtool clean-local ctags distclean \
-        distclean-compile distclean-generic distclean-libtool \
-        distclean-tags distdir dvi dvi-am html html-am info info-am \
-        install install-am install-data install-data-am install-dvi \
-        install-dvi-am install-exec install-exec-am install-html \
-        install-html-am install-includesHEADERS install-info \
-        install-info-am install-libLTLIBRARIES install-man install-pdf \
-        install-pdf-am install-ps install-ps-am install-strip \
-        installcheck installcheck-am installdirs maintainer-clean \
-        maintainer-clean-generic mostlyclean mostlyclean-compile \
-        mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
-        tags uninstall uninstall-am uninstall-includesHEADERS \
-        uninstall-libLTLIBRARIES
-
-
-@EET_AMALGAMATION_TRUE@eet_amalgamation.c: $(base_sources) Makefile
-@EET_AMALGAMATION_TRUE@ -rm -f eet_amalgamation.c
-
-@EET_AMALGAMATION_TRUE@ @echo "#ifdef HAVE_CONFIG_H" >> eet_amalgamation.c
-@EET_AMALGAMATION_TRUE@ @echo "# include \"config.h\"" >> eet_amalgamation.c
-@EET_AMALGAMATION_TRUE@ @echo "#endif" >> eet_amalgamation.c
-
-@EET_AMALGAMATION_TRUE@ @echo "#ifdef HAVE_ALLOCA_H" >> eet_amalgamation.c
-@EET_AMALGAMATION_TRUE@ @echo "# include <alloca.h>" >> eet_amalgamation.c
-@EET_AMALGAMATION_TRUE@ @echo "#elif defined __GNUC__" >> eet_amalgamation.c
-@EET_AMALGAMATION_TRUE@ @echo "# define alloca __builtin_alloca" >> eet_amalgamation.c
-@EET_AMALGAMATION_TRUE@ @echo "#elif defined _AIX" >> eet_amalgamation.c
-@EET_AMALGAMATION_TRUE@ @echo "# define alloca __alloca" >> eet_amalgamation.c
-@EET_AMALGAMATION_TRUE@ @echo "#elif defined _MSC_VER" >> eet_amalgamation.c
-@EET_AMALGAMATION_TRUE@ @echo "# include <malloc.h>" >> eet_amalgamation.c
-@EET_AMALGAMATION_TRUE@ @echo "# define alloca _alloca" >> eet_amalgamation.c
-@EET_AMALGAMATION_TRUE@ @echo "#else" >> eet_amalgamation.c
-@EET_AMALGAMATION_TRUE@ @echo "# include <stddef.h>" >> eet_amalgamation.c
-@EET_AMALGAMATION_TRUE@ @echo "# ifdef __cplusplus" >> eet_amalgamation.c
-@EET_AMALGAMATION_TRUE@ @echo "#extern \"C\"" >> eet_amalgamation.c
-@EET_AMALGAMATION_TRUE@ @echo "# endif" >> eet_amalgamation.c
-@EET_AMALGAMATION_TRUE@ @echo "#void *alloca (size_t);" >> eet_amalgamation.c
-@EET_AMALGAMATION_TRUE@ @echo "#endif" >> eet_amalgamation.c
-
-@EET_AMALGAMATION_TRUE@ @echo "#include <stdio.h>" >> eet_amalgamation.c
-@EET_AMALGAMATION_TRUE@ @echo "#include <string.h>" >> eet_amalgamation.c
-@EET_AMALGAMATION_TRUE@ @echo "#include <math.h>" >> eet_amalgamation.c
-@EET_AMALGAMATION_TRUE@ @echo "#include <ctype.h>" >> eet_amalgamation.c
-@EET_AMALGAMATION_TRUE@ @echo "#include <limits.h>" >> eet_amalgamation.c
-@EET_AMALGAMATION_TRUE@ @echo "#include <sys/types.h>" >> eet_amalgamation.c
-@EET_AMALGAMATION_TRUE@ @echo "#include <sys/stat.h>" >> eet_amalgamation.c
-@EET_AMALGAMATION_TRUE@ @echo "#ifdef HAVE_SIGNATURE" >> eet_amalgamation.c
-@EET_AMALGAMATION_TRUE@ @echo "# include <sys/mman.h>" >> eet_amalgamation.c
-@EET_AMALGAMATION_TRUE@ @echo "#endif" >> eet_amalgamation.c
-@EET_AMALGAMATION_TRUE@ @echo "#include <setjmp.h>" >> eet_amalgamation.c
-@EET_AMALGAMATION_TRUE@ @echo "#include <errno.h>" >> eet_amalgamation.c
-@EET_AMALGAMATION_TRUE@ @echo "#include <time.h>" >> eet_amalgamation.c
-@EET_AMALGAMATION_TRUE@ @echo "#include <fnmatch.h>" >> eet_amalgamation.c
-@EET_AMALGAMATION_TRUE@ @echo "#include <fcntl.h>" >> eet_amalgamation.c
-
-@EET_AMALGAMATION_TRUE@ @echo "#ifdef _WIN32" >> eet_amalgamation.c
-@EET_AMALGAMATION_TRUE@ @echo "# include <winsock2.h>" >> eet_amalgamation.c
-@EET_AMALGAMATION_TRUE@ @echo "#endif" >> eet_amalgamation.c
-
-@EET_AMALGAMATION_TRUE@ @echo "#ifndef _MSC_VER" >> eet_amalgamation.c
-@EET_AMALGAMATION_TRUE@ @echo "# include <unistd.h>" >> eet_amalgamation.c
-@EET_AMALGAMATION_TRUE@ @echo "#endif" >> eet_amalgamation.c
-
-@EET_AMALGAMATION_TRUE@ @echo "#ifdef HAVE_NETINET_IN_H" >> eet_amalgamation.c
-@EET_AMALGAMATION_TRUE@ @echo "# include <netinet/in.h>" >> eet_amalgamation.c
-@EET_AMALGAMATION_TRUE@ @echo "#endif" >> eet_amalgamation.c
-
-@EET_AMALGAMATION_TRUE@ @echo "#ifdef HAVE_GNUTLS" >> eet_amalgamation.c
-@EET_AMALGAMATION_TRUE@ @echo "# include <gnutls/gnutls.h>" >> eet_amalgamation.c
-@EET_AMALGAMATION_TRUE@ @echo "# include <gcrypt.h>" >> eet_amalgamation.c
-@EET_AMALGAMATION_TRUE@ @echo "#endif" >> eet_amalgamation.c
-
-@EET_AMALGAMATION_TRUE@ @echo "#ifdef HAVE_OPENSSL" >> eet_amalgamation.c
-@EET_AMALGAMATION_TRUE@ @echo "# include <openssl/err.h>" >> eet_amalgamation.c
-@EET_AMALGAMATION_TRUE@ @echo "# include <openssl/evp.h>" >> eet_amalgamation.c
-@EET_AMALGAMATION_TRUE@ @echo "# include <openssl/sha.h>" >> eet_amalgamation.c
-@EET_AMALGAMATION_TRUE@ @echo "#endif" >> eet_amalgamation.c
-
-@EET_AMALGAMATION_TRUE@ @echo "#ifdef HAVE_SIGNATURE" >> eet_amalgamation.c
-@EET_AMALGAMATION_TRUE@ @echo "# ifdef HAVE_GNUTLS" >> eet_amalgamation.c
-@EET_AMALGAMATION_TRUE@ @echo "#  include <gnutls/gnutls.h>" >> eet_amalgamation.c
-@EET_AMALGAMATION_TRUE@ @echo "#  include <gnutls/x509.h>" >> eet_amalgamation.c
-@EET_AMALGAMATION_TRUE@ @echo "# else" >> eet_amalgamation.c
-@EET_AMALGAMATION_TRUE@ @echo "#  include <openssl/rsa.h>" >> eet_amalgamation.c
-@EET_AMALGAMATION_TRUE@ @echo "#  include <openssl/objects.h>" >> eet_amalgamation.c
-@EET_AMALGAMATION_TRUE@ @echo "#  include <openssl/err.h>" >> eet_amalgamation.c
-@EET_AMALGAMATION_TRUE@ @echo "#  include <openssl/ssl.h>" >> eet_amalgamation.c
-@EET_AMALGAMATION_TRUE@ @echo "#  include <openssl/dh.h>" >> eet_amalgamation.c
-@EET_AMALGAMATION_TRUE@ @echo "#  include <openssl/dsa.h>" >> eet_amalgamation.c
-@EET_AMALGAMATION_TRUE@ @echo "#  include <openssl/evp.h>" >> eet_amalgamation.c
-@EET_AMALGAMATION_TRUE@ @echo "#  include <openssl/x509.h>" >> eet_amalgamation.c
-@EET_AMALGAMATION_TRUE@ @echo "#  include <openssl/pem.h>" >> eet_amalgamation.c
-@EET_AMALGAMATION_TRUE@ @echo "# endif" >> eet_amalgamation.c
-@EET_AMALGAMATION_TRUE@ @echo "#endif" >> eet_amalgamation.c
-
-@EET_AMALGAMATION_TRUE@ @echo "#ifdef HAVE_CIPHER" >> eet_amalgamation.c
-@EET_AMALGAMATION_TRUE@ @echo "# ifdef HAVE_GNUTLS" >> eet_amalgamation.c
-@EET_AMALGAMATION_TRUE@ @echo "#  include <gnutls/x509.h>" >> eet_amalgamation.c
-@EET_AMALGAMATION_TRUE@ @echo "#  include <gcrypt.h>" >> eet_amalgamation.c
-@EET_AMALGAMATION_TRUE@ @echo "# else" >> eet_amalgamation.c
-@EET_AMALGAMATION_TRUE@ @echo "#  include <openssl/evp.h>" >> eet_amalgamation.c
-@EET_AMALGAMATION_TRUE@ @echo "#  include <openssl/hmac.h>" >> eet_amalgamation.c
-@EET_AMALGAMATION_TRUE@ @echo "#  include <openssl/rand.h>" >> eet_amalgamation.c
-@EET_AMALGAMATION_TRUE@ @echo "# endif" >> eet_amalgamation.c
-@EET_AMALGAMATION_TRUE@ @echo "#endif" >> eet_amalgamation.c
-
-@EET_AMALGAMATION_TRUE@ @echo "#include <zlib.h>" >> eet_amalgamation.c
-@EET_AMALGAMATION_TRUE@ @echo "#include <jpeglib.h>" >> eet_amalgamation.c
-
-@EET_AMALGAMATION_TRUE@ @echo "#ifdef HAVE_EVIL" >> eet_amalgamation.c
-@EET_AMALGAMATION_TRUE@ @echo "# include <Evil.h>" >> eet_amalgamation.c
-@EET_AMALGAMATION_TRUE@ @echo "#endif" >> eet_amalgamation.c
-
-@EET_AMALGAMATION_TRUE@ @echo "#include <Eet.h>" >> eet_amalgamation.c
-
-@EET_AMALGAMATION_TRUE@ @echo "#include \"Eet_private.h\"" >> eet_amalgamation.c
-@EET_AMALGAMATION_TRUE@ @echo "#include \"Eet.h\"" >> eet_amalgamation.c
-
-@EET_AMALGAMATION_TRUE@ @for f in $(base_sources); do \
-@EET_AMALGAMATION_TRUE@    if [ `echo $$f | sed -e 's/^...\(.\).*/\1/'` != '/' ]; then \
-@EET_AMALGAMATION_TRUE@           file="$(srcdir)/$$f" ; \
-@EET_AMALGAMATION_TRUE@    else \
-@EET_AMALGAMATION_TRUE@           file="$$f" ; \
-@EET_AMALGAMATION_TRUE@    fi ; \
-@EET_AMALGAMATION_TRUE@    echo "/* file: $$file */" >> eet_amalgamation.c; \
-@EET_AMALGAMATION_TRUE@    grep -v -e '^# *include \+.\(config\|\|Evil\|Eina\|stdio\|string\|math\|ctype\|limits\|sys/types\|sys/stat\|sys/mman\|setjmp\|errno\|time\|fnmatch\|fcntl\|winsock2\|unistd\|netinet/in\|gnutls/gnutls\|gcrypt\|gnutls/x509\|openssl/rsa\|openssl/objects\|openssl/err\|openssl/ssl\|openssl/dh\|openssl/dsa\|openssl/evp\|openssl/pem\|openssl/sha\|openssl/hmac\|openssl/x509\|openssl/rand\|zlib\|jpeglib\|Eet_private\|Eet\)[.]h.*' $$file >> eet_amalgamation.c; \
-@EET_AMALGAMATION_TRUE@ done
-@EET_AMALGAMATION_TRUE@ @echo "eet_amalgamation.c generated"
-
-clean-local:
-        @rm -rf *.gcno eet_amalgamation.c
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/libraries/eet/src/lib/eet_alloc.c b/libraries/eet/src/lib/eet_alloc.c
deleted file mode 100644
index 29e276c..0000000
--- a/libraries/eet/src/lib/eet_alloc.c
+++ /dev/null
@@ -1,93 +0,0 @@
-#ifdef HAVE_CONFIG_H
-# include "config.h"
-#endif
-
-#include <Eina.h>
-
-#include "Eet.h"
-#include "Eet_private.h"
-
-typedef struct _Eet_Mempool Eet_Mempool;
-struct _Eet_Mempool
-{
-   const char *name;
-   Eina_Mempool *mp;
-   size_t size;
-};
-
-#define GENERIC_ALLOC_FREE(TYPE, Type)                                  \
-  Eet_Mempool Type##_mp = { #TYPE,  NULL, sizeof (TYPE) };              \
-                                                                        \
-  TYPE *                                                                \
-  Type##_malloc(unsigned int num)                                       \
-  {                                                                     \
-     return eina_mempool_malloc(Type##_mp.mp, num * sizeof (TYPE));     \
-  }                                                                     \
-  TYPE *                                                                \
-  Type##_calloc(unsigned int num)                                       \
-  {                                                                     \
-     return eina_mempool_calloc(Type##_mp.mp, num * sizeof (TYPE));     \
-  }                                                                     \
-  void                                                                  \
-  Type##_mp_free(TYPE *e)                                               \
-  {                                                                     \
-     eina_mempool_free(Type##_mp.mp, e);                                \
-  }
-
-GENERIC_ALLOC_FREE(Eet_File_Directory, eet_file_directory);
-GENERIC_ALLOC_FREE(Eet_File_Node, eet_file_node);
-GENERIC_ALLOC_FREE(Eet_File_Header, eet_file_header);
-GENERIC_ALLOC_FREE(Eet_Dictionary, eet_dictionary);
-GENERIC_ALLOC_FREE(Eet_File, eet_file);
-
-static Eet_Mempool *mempool_array[] = {
-  &eet_file_directory_mp,
-  &eet_file_node_mp,
-  &eet_file_header_mp,
-  &eet_dictionary_mp,
-  &eet_file_mp,
-};
-
-Eina_Bool
-eet_mempool_init(void)
-{
-   const char *choice;
-   unsigned int i;
-
-   choice = getenv("EINA_MEMPOOL");
-   if ((!choice) || (!choice[0]))
-     choice = "chained_mempool";
-
-   for (i = 0; i < sizeof (mempool_array) / sizeof (mempool_array[0]); ++i)
-     {
-     retry:
-        mempool_array[i]->mp = eina_mempool_add(choice, mempool_array[i]->name, NULL, mempool_array[i]->size, 64);
-        if (!mempool_array[i]->mp)
-          {
-             if (!strcmp(choice, "pass_through"))
-               {
-                  ERR("Falling back to pass through ! Previously tried '%s' mempool.", choice);
-                  choice = "pass_through";
-                  goto retry;
-               }
-             else
-               {
-                  ERR("Impossible to allocate mempool '%s' !", choice);
-                  return EINA_FALSE;
-               }
-          }
-     }
-   return EINA_TRUE;
-}
-
-void
-eet_mempool_shutdown(void)
-{
-   unsigned int i;
-
-   for (i = 0; i < sizeof (mempool_array) / sizeof (mempool_array[0]); ++i)
-     {
-        eina_mempool_del(mempool_array[i]->mp);
-        mempool_array[i]->mp = NULL;
-     }
-}
diff --git a/libraries/eet/src/lib/eet_cipher.c b/libraries/eet/src/lib/eet_cipher.c
deleted file mode 100644
index 2425e22..0000000
--- a/libraries/eet/src/lib/eet_cipher.c
+++ /dev/null
@@ -1,1387 +0,0 @@
-#ifdef HAVE_CONFIG_H
-# include <config.h>
-#endif /* ifdef HAVE_CONFIG_H */
-
-#ifdef HAVE_ALLOCA_H
-# include <alloca.h>
-#elif defined __GNUC__
-# define alloca __builtin_alloca
-#elif defined _AIX
-# define alloca __alloca
-#elif defined _MSC_VER
-# include <malloc.h>
-# define alloca _alloca
-#else /* ifdef HAVE_ALLOCA_H */
-# include <stddef.h>
-# ifdef  __cplusplus
-extern "C"
-# endif /* ifdef  __cplusplus */
-void *alloca(size_t);
-#endif /* ifdef HAVE_ALLOCA_H */
-
-#include <stdio.h>
-#include <string.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-
-#ifdef HAVE_UNISTD_H
-# include <unistd.h>
-#endif /* ifdef HAVE_UNISTD_H */
-
-#ifdef HAVE_NETINET_IN_H
-# include <netinet/in.h>
-#endif /* ifdef HAVE_NETINET_IN_H */
-
-#ifdef HAVE_SIGNATURE
-# include <sys/mman.h>
-# ifdef HAVE_GNUTLS
-#  include <gnutls/gnutls.h>
-#  include <gnutls/x509.h>
-# else /* ifdef HAVE_GNUTLS */
-#  include <openssl/rsa.h>
-#  include <openssl/objects.h>
-#  include <openssl/err.h>
-#  include <openssl/ssl.h>
-#  include <openssl/dh.h>
-#  include <openssl/dsa.h>
-#  include <openssl/evp.h>
-#  include <openssl/x509.h>
-#  include <openssl/pem.h>
-# endif /* ifdef HAVE_GNUTLS */
-#endif /* ifdef HAVE_SIGNATURE */
-
-#ifdef HAVE_OPENSSL
-# include <openssl/sha.h>
-#endif /* ifdef HAVE_OPENSSL */
-
-#ifdef HAVE_CIPHER
-# ifdef HAVE_GNUTLS
-#  if defined EET_USE_NEW_PUBKEY_VERIFY_HASH || defined EET_USE_NEW_PRIVKEY_SIGN_DATA
-#   include <gnutls/abstract.h>
-#  endif
-#  include <gnutls/x509.h>
-#  include <gcrypt.h>
-# else /* ifdef HAVE_GNUTLS */
-#  include <openssl/evp.h>
-#  include <openssl/hmac.h>
-#  include <openssl/rand.h>
-# endif /* ifdef HAVE_GNUTLS */
-#endif /* ifdef HAVE_CIPHER */
-
-#include "Eet.h"
-#include "Eet_private.h"
-
-#define EET_MAGIC_SIGN 0x1ee74271
-
-#ifdef HAVE_GNUTLS
-# define MAX_KEY_LEN   32
-# define MAX_IV_LEN    16
-#else /* ifdef HAVE_GNUTLS */
-# define MAX_KEY_LEN   EVP_MAX_KEY_LENGTH
-# define MAX_IV_LEN    EVP_MAX_IV_LENGTH
-#endif /* ifdef HAVE_GNUTLS */
-
-#ifdef HAVE_CIPHER
-# ifdef HAVE_GNUTLS
-static Eet_Error
-eet_hmac_sha1(const void    *key,
-              size_t         key_len,
-              const void    *data,
-              size_t         data_len,
-              unsigned char *res);
-# endif /* ifdef HAVE_GNUTLS */
-static Eet_Error
-eet_pbkdf2_sha1(const char          *key,
-                int                  key_len,
-                const unsigned char *salt,
-                unsigned int         salt_len,
-                int                  iter,
-                unsigned char       *res,
-                int                  res_len);
-#endif /* ifdef HAVE_CIPHER */
-
-struct _Eet_Key
-{
-   int                   references;
-#ifdef HAVE_SIGNATURE
-# ifdef HAVE_GNUTLS
-   gnutls_x509_crt_t     certificate;
-   gnutls_x509_privkey_t private_key;
-# else /* ifdef HAVE_GNUTLS */
-   X509                 *certificate;
-   EVP_PKEY             *private_key;
-# endif /* ifdef HAVE_GNUTLS */
-#endif /* ifdef HAVE_SIGNATURE */
-};
-
-EAPI Eet_Key *
-eet_identity_open(const char               *certificate_file,
-                  const char               *private_key_file,
-                  Eet_Key_Password_Callback cb)
-{
-#ifdef HAVE_SIGNATURE
-   /* Signature declarations */
-   Eet_Key *key = NULL;
-# ifdef HAVE_GNUTLS
-   /* Gnutls private declarations */
-   Eina_File *f = NULL;
-   void *data = NULL;
-   gnutls_datum_t load_file = { NULL, 0 };
-   char pass[1024];
-
-   /* Init */
-   if (!(key = malloc(sizeof(Eet_Key))))
-     goto on_error;
-
-   key->references = 1;
-
-   if (gnutls_x509_crt_init(&(key->certificate)))
-     goto on_error;
-
-   if (gnutls_x509_privkey_init(&(key->private_key)))
-     goto on_error;
-
-   /* Mmap certificate_file */
-   f = eina_file_open(certificate_file, 0);
-   if (!f)
-     goto on_error;
-
-   /* let's make mmap safe and just get 0 pages for IO erro */
-   eina_mmap_safety_enabled_set(EINA_TRUE);
-
-   data = eina_file_map_all(f, EINA_FILE_SEQUENTIAL);
-   if (!data) goto on_error;
-
-   /* Import the certificate in Eet_Key structure */
-   load_file.data = data;
-   load_file.size = eina_file_size_get(f);
-   if (gnutls_x509_crt_import(key->certificate, &load_file,
-                              GNUTLS_X509_FMT_PEM) < 0)
-     goto on_error;
-
-   eina_file_map_free(f, data);
-
-   /* Reset values */
-   eina_file_close(f);
-   f = NULL;
-   data = NULL;
-   load_file.data = NULL;
-   load_file.size = 0;
-
-   /* Mmap private_key_file */
-   f = eina_file_open(private_key_file, 0);
-   if (!f)
-     goto on_error;
-
-   /* let's make mmap safe and just get 0 pages for IO erro */
-   eina_mmap_safety_enabled_set(EINA_TRUE);
-
-   data = eina_file_map_all(f, EINA_FILE_SEQUENTIAL);
-   if (!data)
-     goto on_error;
-
-   /* Import the private key in Eet_Key structure */
-   load_file.data = data;
-   load_file.size = eina_file_size_get(f);
-   /* Try to directly import the PEM encoded private key */
-   if (gnutls_x509_privkey_import(key->private_key, &load_file,
-                                  GNUTLS_X509_FMT_PEM) < 0)
-     {
-        /* Else ask for the private key pass */
-         if (cb && cb(pass, 1024, 0, NULL))
-           {
-     /* If pass then try to decode the pkcs 8 private key */
-               if (gnutls_x509_privkey_import_pkcs8(key->private_key, &load_file,
-                                                    GNUTLS_X509_FMT_PEM, pass, 0))
-                 goto on_error;
-           }
-         else
-         /* Else try to import the pkcs 8 private key without pass */
-         if (gnutls_x509_privkey_import_pkcs8(key->private_key, &load_file,
-                                              GNUTLS_X509_FMT_PEM, NULL, 1))
-           goto on_error;
-     }
-
-   eina_file_map_free(f, data);
-   eina_file_close(f);
-
-   return key;
-
-on_error:
-   if (data) eina_file_map_free(f, data);
-   if (f) eina_file_close(f);
-
-   if (key)
-     {
-        if (key->certificate)
-          gnutls_x509_crt_deinit(key->certificate);
-
-        if (key->private_key)
-          gnutls_x509_privkey_deinit(key->private_key);
-
-        free(key);
-     }
-
-# else /* ifdef HAVE_GNUTLS */
-   /* Openssl private declarations */
-   FILE *fp;
-   EVP_PKEY *pkey = NULL;
-   X509 *cert = NULL;
-
-   /* Load the X509 certificate in memory. */
-   fp = fopen(certificate_file, "r");
-   if (!fp)
-     return NULL;
-
-   cert = PEM_read_X509(fp, NULL, NULL, NULL);
-   fclose(fp);
-   if (!cert)
-     goto on_error;
-
-   /* Check the presence of the public key. Just in case. */
-   pkey = X509_get_pubkey(cert);
-   if (!pkey)
-     goto on_error;
-
-   /* Load the private key in memory. */
-   fp = fopen(private_key_file, "r");
-   if (!fp)
-     goto on_error;
-
-   pkey = PEM_read_PrivateKey(fp, NULL, cb, NULL);
-   fclose(fp);
-   if (!pkey)
-     goto on_error;
-
-   /* Load the certificate and the private key in Eet_Key structure */
-   key = malloc(sizeof(Eet_Key));
-   if (!key)
-     goto on_error;
-
-   key->references = 1;
-   key->certificate = cert;
-   key->private_key = pkey;
-
-   return key;
-
-on_error:
-   if (cert)
-     X509_free(cert);
-
-   if (pkey)
-     EVP_PKEY_free(pkey);
-
-# endif /* ifdef HAVE_GNUTLS */
-#else
-   certificate_file = NULL;
-   private_key_file = NULL;
-   cb = NULL;
-#endif /* ifdef HAVE_SIGNATURE */
-   return NULL;
-}
-
-EAPI void
-eet_identity_close(Eet_Key *key)
-{
-#ifdef HAVE_SIGNATURE
-   if (!key || (key->references > 0))
-     return;
-
-# ifdef HAVE_GNUTLS
-   gnutls_x509_crt_deinit(key->certificate);
-   gnutls_x509_privkey_deinit(key->private_key);
-# else /* ifdef HAVE_GNUTLS */
-   X509_free(key->certificate);
-   EVP_PKEY_free(key->private_key);
-# endif /* ifdef HAVE_GNUTLS */
-   free(key);
-#else
-   key = NULL;
-#endif /* ifdef HAVE_SIGNATURE */
-}
-
-EAPI void
-eet_identity_print(Eet_Key *key,
-                   FILE    *out)
-{
-#ifdef HAVE_SIGNATURE
-# ifdef HAVE_GNUTLS
-   const char *names[6] = {
-      "Modulus",
-      "Public exponent",
-      "Private exponent",
-      "First prime",
-      "Second prime",
-      "Coefficient"
-   };
-   int err = 0;
-   gnutls_datum_t data = { NULL, 0 };
-   gnutls_datum_t rsa_raw[6];
-   size_t size = 128;
-   char *res = NULL;
-   char buf[33];
-   unsigned int i, j;
-
-   if (!key)
-     return;
-
-   if (key->private_key)
-     {
-        if (gnutls_x509_privkey_export_rsa_raw(key->private_key,
-                                               rsa_raw + 0, /* Modulus */
-                                               rsa_raw + 1, /* Public exponent */
-                                               rsa_raw + 2, /* Private exponent */
-                                               rsa_raw + 3, /* First prime */
-                                               rsa_raw + 4, /* Second prime */
-                                               rsa_raw + 5)) /* Coefficient */
-          goto on_error;
-
-        if (!(res = malloc(size)))
-          goto on_error;
-
-        fprintf(out, "Private Key:\n");
-        buf[32] = '\0';
-
-        for (i = 0; i < 6; i++)
-          {
-             while ((err = gnutls_hex_encode(rsa_raw + i, res, &size)) ==
-                    GNUTLS_E_SHORT_MEMORY_BUFFER)
-               {
-                  size += 128;
-                  if (!(res = realloc(res, size)))
-                    goto on_error;
-               }
-             if (err)
-               goto on_error;
-
-             fprintf(out, "\t%s:\n", names[i]);
-             for (j = 0; strlen(res) > j; j += 32)
-               {
-                  snprintf(buf, 32, "%s", res + j);
-                  fprintf(out, "\t\t%s\n", buf);
-               }
-          }
-        free(res);
-        res = NULL;
-     }
-
-   if (key->certificate)
-     {
-        fprintf(out, "Public certificate:\n");
-        if (gnutls_x509_crt_print(key->certificate, GNUTLS_X509_CRT_FULL,
-                                  &data))
-          goto on_error;
-
-        fprintf(out, "%s\n", data.data);
-        gnutls_free(data.data);
-        data.data = NULL;
-     }
-
-on_error:
-   if (res)
-     free(res);
-
-   if (data.data)
-     gnutls_free(data.data);
-
-   return;
-# else /* ifdef HAVE_GNUTLS */
-   RSA *rsa;
-   DSA *dsa;
-   DH *dh;
-
-   if (!key)
-     return;
-
-   rsa = EVP_PKEY_get1_RSA(key->private_key);
-   if (rsa)
-     {
-        fprintf(out, "Private key (RSA):\n");
-        RSA_print_fp(out, rsa, 0);
-     }
-
-   dsa = EVP_PKEY_get1_DSA(key->private_key);
-   if (dsa)
-     {
-        fprintf(out, "Private key (DSA):\n");
-        DSA_print_fp(out, dsa, 0);
-     }
-
-   dh = EVP_PKEY_get1_DH(key->private_key);
-   if (dh)
-     {
-        fprintf(out, "Private key (DH):\n");
-        DHparams_print_fp(out, dh);
-     }
-
-   fprintf(out, "Public certificate:\n");
-   X509_print_fp(out, key->certificate);
-# endif /* ifdef HAVE_GNUTLS */
-#else /* ifdef HAVE_SIGNATURE */
-   key = NULL;
-   out = NULL;
-   ERR("You need to compile signature support in EET.");
-#endif /* ifdef HAVE_SIGNATURE */
-}
-
-void
-eet_identity_ref(Eet_Key *key)
-{
-   if (!key)
-     return;
-
-   key->references++;
-}
-
-void
-eet_identity_unref(Eet_Key *key)
-{
-   if (!key)
-     return;
-
-   key->references--;
-   eet_identity_close(key);
-}
-
-void *
-eet_identity_compute_sha1(const void  *data_base,
-                          unsigned int data_length,
-                          int         *sha1_length)
-{
-   void *result;
-
-#ifdef HAVE_SIGNATURE
-# ifdef HAVE_GNUTLS
-   result = malloc(gcry_md_get_algo_dlen(GCRY_MD_SHA1));
-   if (!result)
-     return NULL;
-
-   gcry_md_hash_buffer(GCRY_MD_SHA1, result, data_base, data_length);
-   if (sha1_length)
-     *sha1_length = gcry_md_get_algo_dlen(GCRY_MD_SHA1);
-
-# else /* ifdef HAVE_GNUTLS */
-#  ifdef HAVE_OPENSSL
-   result = malloc(SHA_DIGEST_LENGTH);
-   if (!result)
-     return NULL;
-
-   SHA1(data_base, data_length, result);
-   if (sha1_length)
-     *sha1_length = SHA_DIGEST_LENGTH;
-
-#  else /* ifdef HAVE_OPENSSL */
-   result = NULL;
-#  endif /* ifdef HAVE_OPENSSL */
-# endif /* ifdef HAVE_GNUTLS */
-#else /* ifdef HAVE_SIGNATURE */
-   data_base = NULL;
-   data_length = 0;
-   sha1_length = NULL;
-   result = NULL;
-#endif /* ifdef HAVE_SIGNATURE */
-
-   return result;
-}
-
-Eet_Error
-eet_identity_sign(FILE    *fp,
-                  Eet_Key *key)
-{
-#ifdef HAVE_SIGNATURE
-   Eet_Error err = EET_ERROR_NONE;
-   struct stat st_buf;
-   void *data;
-   int fd;
-   int head[3];
-   unsigned char *sign = NULL;
-   unsigned char *cert = NULL;
-# ifdef HAVE_GNUTLS
-   gnutls_datum_t datum = { NULL, 0 };
-   size_t sign_len = 0;
-   size_t cert_len = 0;
-#ifdef EET_USE_NEW_PRIVKEY_SIGN_DATA
-   gnutls_datum_t signum = { NULL, 0 };
-   gnutls_privkey_t privkey;
-#endif
-# else /* ifdef HAVE_GNUTLS */
-   EVP_MD_CTX md_ctx;
-   unsigned int sign_len = 0;
-   int cert_len = 0;
-# endif /* ifdef HAVE_GNUTLS */
-
-   /* A few check and flush pending write. */
-   if (!fp || !key || !key->certificate || !key->private_key)
-     return EET_ERROR_BAD_OBJECT;
-
-   /* Get the file size. */
-   fd = fileno(fp);
-   if (fd < 0)
-     return EET_ERROR_BAD_OBJECT;
-
-   if (fstat(fd, &st_buf) < 0)
-     return EET_ERROR_MMAP_FAILED;
-
-   /* let's make mmap safe and just get 0 pages for IO erro */
-   eina_mmap_safety_enabled_set(EINA_TRUE);
-
-   /* Map the file in memory. */
-   data = mmap(NULL, st_buf.st_size, PROT_READ, MAP_PRIVATE, fd, 0);
-   if (data == MAP_FAILED)
-     return EET_ERROR_MMAP_FAILED;
-
-# ifdef HAVE_GNUTLS
-   datum.data = data;
-   datum.size = st_buf.st_size;
-
-   /* Get the signature length */
-#ifdef EET_USE_NEW_PRIVKEY_SIGN_DATA
-   if (gnutls_privkey_init(&privkey) < 0)
-     {
-        err = EET_ERROR_SIGNATURE_FAILED;
-        goto on_error;
-     }
-
-   if (gnutls_privkey_import_x509(privkey, key->private_key, 0) < 0)
-     {
-        err = EET_ERROR_SIGNATURE_FAILED;
-        goto on_error;
-     }
-
-   if (gnutls_privkey_sign_data(privkey, GNUTLS_DIG_SHA1, 0, &datum, &signum) < 0)
-     {
-        err = EET_ERROR_SIGNATURE_FAILED;
-        goto on_error;
-     }
-
-   sign = signum.data;
-   sign_len = signum.size;
-#else
-   if (gnutls_x509_privkey_sign_data(key->private_key, GNUTLS_DIG_SHA1, 0,
-                                     &datum, sign, &sign_len) &&
-       !sign_len)
-     {
-        err = EET_ERROR_SIGNATURE_FAILED;
-        goto on_error;
-     }
-
-   /* Get the signature */
-   sign = malloc(sign_len);
-   if (!sign ||
-       gnutls_x509_privkey_sign_data(key->private_key, GNUTLS_DIG_SHA1, 0,
-                                     &datum,
-                                     sign, &sign_len))
-     {
-        if (!sign)
-          err = EET_ERROR_OUT_OF_MEMORY;
-        else
-          err = EET_ERROR_SIGNATURE_FAILED;
-
-        goto on_error;
-     }
-#endif
-
-   /* Get the certificate length */
-   if (gnutls_x509_crt_export(key->certificate, GNUTLS_X509_FMT_DER, cert,
-                              &cert_len) &&
-       !cert_len)
-     {
-        err = EET_ERROR_SIGNATURE_FAILED;
-        goto on_error;
-     }
-
-   /* Get the certificate */
-   cert = malloc(cert_len);
-   if (!cert ||
-       gnutls_x509_crt_export(key->certificate, GNUTLS_X509_FMT_DER, cert,
-                              &cert_len))
-     {
-        if (!cert)
-          err = EET_ERROR_OUT_OF_MEMORY;
-        else
-          err = EET_ERROR_SIGNATURE_FAILED;
-
-        goto on_error;
-     }
-
-# else /* ifdef HAVE_GNUTLS */
-   sign_len = EVP_PKEY_size(key->private_key);
-   sign = malloc(sign_len);
-   if (!sign)
-     {
-        err = EET_ERROR_OUT_OF_MEMORY;
-        goto on_error;
-     }
-
-   /* Do the signature. */
-   EVP_SignInit(&md_ctx, EVP_sha1());
-   EVP_SignUpdate(&md_ctx, data, st_buf.st_size);
-   err = EVP_SignFinal(&md_ctx,
-                       sign,
-                       (unsigned int *)&sign_len,
-                       key->private_key);
-   if (err != 1)
-     {
-        ERR_print_errors_fp(stdout);
-        err = EET_ERROR_SIGNATURE_FAILED;
-        goto on_error;
-     }
-
-   /* Give me the der (binary form for X509). */
-   cert_len = i2d_X509(key->certificate, &cert);
-   if (cert_len < 0)
-     {
-        ERR_print_errors_fp(stdout);
-        err = EET_ERROR_X509_ENCODING_FAILED;
-        goto on_error;
-     }
-
-# endif /* ifdef HAVE_GNUTLS */
-   /* Append the signature at the end of the file. */
-   head[0] = (int)htonl ((unsigned int)EET_MAGIC_SIGN);
-   head[1] = (int)htonl ((unsigned int)sign_len);
-   head[2] = (int)htonl ((unsigned int)cert_len);
-
-   if (fwrite(head, sizeof(head), 1, fp) != 1)
-     {
-        err = EET_ERROR_WRITE_ERROR;
-        goto on_error;
-     }
-
-   if (fwrite(sign, sign_len, 1, fp) != 1)
-     {
-        err = EET_ERROR_WRITE_ERROR;
-        goto on_error;
-     }
-
-   if (fwrite(cert, cert_len, 1, fp) != 1)
-     {
-        err = EET_ERROR_WRITE_ERROR;
-        goto on_error;
-     }
-
-on_error:
-# ifdef HAVE_GNUTLS
-   if (cert)
-     free(cert);
-
-# else /* ifdef HAVE_GNUTLS */
-   if (cert)
-     OPENSSL_free(cert);
-
-# endif /* ifdef HAVE_GNUTLS */
-   if (sign)
-     free(sign);
-
-   munmap(data, st_buf.st_size);
-   return err;
-#else /* ifdef HAVE_SIGNATURE */
-   fp = NULL;
-   key = NULL;
-   return EET_ERROR_NOT_IMPLEMENTED;
-#endif /* ifdef HAVE_SIGNATURE */
-}
-
-const void *
-eet_identity_check(const void   *data_base,
-                   unsigned int  data_length,
-                   void        **sha1,
-                   int          *sha1_length,
-                   const void   *signature_base,
-                   unsigned int  signature_length,
-                   const void  **raw_signature_base,
-                   unsigned int *raw_signature_length,
-                   int          *x509_length)
-{
-#ifdef HAVE_SIGNATURE
-   const int *header = signature_base;
-   const unsigned char *sign;
-   const unsigned char *cert_der;
-   int sign_len;
-   int cert_len;
-   int magic;
-
-   /* At least the header size */
-   if (signature_length < sizeof(int) * 3)
-     return NULL;
-
-   /* Get the header */
-   magic = ntohl(header[0]);
-   sign_len = ntohl(header[1]);
-   cert_len = ntohl(header[2]);
-
-   /* Verify the header */
-   if (magic != EET_MAGIC_SIGN)
-     return NULL;
-
-   if (sign_len + cert_len + sizeof(int) * 3 > signature_length)
-     return NULL;
-
-   /* Update the signature and certificate pointer */
-   sign = (unsigned char *)signature_base + sizeof(int) * 3;
-   cert_der = sign + sign_len;
-
-# ifdef HAVE_GNUTLS
-   gnutls_x509_crt_t cert;
-   gnutls_datum_t datum;
-   gnutls_datum_t signature;
-#  if EET_USE_NEW_GNUTLS_API
-#  if EET_USE_NEW_PUBKEY_VERIFY_HASH
-   gnutls_pubkey_t pubkey;
-   gnutls_digest_algorithm_t hash_algo;
-#  endif
-   unsigned char *hash;
-   gcry_md_hd_t md;
-   int err;
-#  endif /* if EET_USE_NEW_GNUTLS_API */
-
-   /* Create an understanding certificate structure for gnutls */
-   datum.data = (void *)cert_der;
-   datum.size = cert_len;
-   gnutls_x509_crt_init(&cert);
-   gnutls_x509_crt_import(cert, &datum, GNUTLS_X509_FMT_DER);
-
-   signature.data = (void *)sign;
-   signature.size = sign_len;
-
-   /* Verify the signature */
-#  if EET_USE_NEW_GNUTLS_API
-   /*
-      I am waiting for my patch being accepted in GnuTLS release.
-      But we now have a way to prevent double computation of SHA1.
-    */
-   err = gcry_md_open (&md, GCRY_MD_SHA1, 0);
-   if (err < 0)
-     return NULL;
-
-   gcry_md_write(md, data_base, data_length);
-
-   hash = gcry_md_read(md, GCRY_MD_SHA1);
-   if (!hash)
-     goto on_error;
-
-   datum.size = gcry_md_get_algo_dlen(GCRY_MD_SHA1);
-   datum.data = hash;
-
-#  ifdef EET_USE_NEW_PUBKEY_VERIFY_HASH
-   if (gnutls_pubkey_init(&pubkey) < 0)
-     goto on_error;
-
-   if (gnutls_pubkey_import_x509(pubkey, cert, 0) < 0)
-     goto on_error;
-
-   if (gnutls_pubkey_get_verify_algorithm(pubkey, &signature, &hash_algo) < 0)
-     goto on_error;
-
-   if (gnutls_pubkey_verify_hash(pubkey, 0, &datum, &signature) < 0)
-     goto on_error;
-#  else
-   if (!gnutls_x509_crt_verify_hash(cert, 0, &datum, &signature))
-     goto on_error;
-#  endif
-
-   if (sha1)
-     {
-        *sha1 = malloc(datum.size);
-        if (!*sha1) goto on_error;
-
-        memcpy(*sha1, hash, datum.size);
-        *sha1_length = datum.size;
-     }
-
-   gcry_md_close(md);
-#  else /* if EET_USE_NEW_GNUTLS_API */
-   datum.data = (void *)data_base;
-   datum.size = data_length;
-
-   if (!gnutls_x509_crt_verify_data(cert, 0, &datum, &signature))
-     return NULL;
-
-   if (sha1)
-     {
-        *sha1 = NULL;
-        *sha1_length = -1;
-     }
-
-#  endif /* if EET_USE_NEW_GNUTLS_API */
-   gnutls_x509_crt_deinit(cert);
-
-# else /* ifdef HAVE_GNUTLS */
-   const unsigned char *tmp;
-   EVP_PKEY *pkey;
-   X509 *x509;
-   EVP_MD_CTX md_ctx;
-   int err;
-
-   /* Strange but d2i_X509 seems to put 0 all over the place. */
-   tmp = alloca(cert_len);
-   memcpy((char *)tmp, cert_der, cert_len);
-   x509 = d2i_X509(NULL, &tmp, cert_len);
-   if (!x509)
-     return NULL;
-
-   /* Get public key - eay */
-   pkey = X509_get_pubkey(x509);
-   if (!pkey)
-     {
-        X509_free(x509);
-        return NULL;
-     }
-
-   /* Verify the signature */
-   EVP_VerifyInit(&md_ctx, EVP_sha1());
-   EVP_VerifyUpdate(&md_ctx, data_base, data_length);
-   err = EVP_VerifyFinal(&md_ctx, sign, sign_len, pkey);
-
-   X509_free(x509);
-   EVP_PKEY_free(pkey);
-
-   if (sha1)
-     {
-        *sha1 = NULL;
-        *sha1_length = -1;
-     }
-
-   if (err != 1)
-     return NULL;
-
-# endif /* ifdef HAVE_GNUTLS */
-   if (x509_length)
-     *x509_length = cert_len;
-
-   if (raw_signature_base)
-     *raw_signature_base = sign;
-
-   if (raw_signature_length)
-     *raw_signature_length = sign_len;
-
-   return cert_der;
-# ifdef HAVE_GNUTLS
-#  if EET_USE_NEW_GNUTLS_API
- on_error:
-   gcry_md_close(md);
-   return NULL;
-#  endif
-# endif
-#else /* ifdef HAVE_SIGNATURE */
-   data_base = NULL;
-   data_length = 0;
-   sha1 = NULL;
-   sha1_length = NULL;
-   signature_base = NULL;
-   signature_length = 0;
-   raw_signature_base = NULL;
-   raw_signature_length = NULL;
-   x509_length = NULL;
-   return NULL;
-#endif /* ifdef HAVE_SIGNATURE */
-}
-
-EAPI void
-eet_identity_certificate_print(const unsigned char *certificate,
-                               int                  der_length,
-                               FILE                *out)
-{
-#ifdef HAVE_SIGNATURE
-   if (!certificate || !out || der_length <= 0)
-     {
-        ERR("No certificate provided.");
-        return;
-     }
-
-# ifdef HAVE_GNUTLS
-   gnutls_datum_t datum;
-   gnutls_x509_crt_t cert;
-
-   /* Create an understanding certificate structure for gnutls */
-   datum.data = (void *)certificate;
-   datum.size = der_length;
-   if (gnutls_x509_crt_init(&cert))
-     goto on_error;
-
-   if (gnutls_x509_crt_import(cert, &datum, GNUTLS_X509_FMT_DER))
-     goto on_error;
-
-   /* Pretty print the certificate */
-   datum.data = NULL;
-   datum.size = 0;
-   if (gnutls_x509_crt_print(cert, GNUTLS_X509_CRT_FULL, &datum))
-     goto on_error;
-
-   INF("Public certificate :");
-   INF("%s", datum.data);
-
-on_error:
-   if (datum.data)
-     gnutls_free(datum.data);
-
-   gnutls_x509_crt_deinit(cert);
-# else /* ifdef HAVE_GNUTLS */
-   const unsigned char *tmp;
-   X509 *x509;
-
-   /* Strange but d2i_X509 seems to put 0 all over the place. */
-   tmp = alloca(der_length);
-   memcpy((char *)tmp, certificate, der_length);
-   x509 = d2i_X509(NULL, &tmp, der_length);
-   if (!x509)
-     {
-        INF("Not a valid certificate.");
-        return;
-     }
-
-   INF("Public certificate :");
-   X509_print_fp(out, x509);
-
-   X509_free(x509);
-# endif /* ifdef HAVE_GNUTLS */
-#else /* ifdef HAVE_SIGNATURE */
-   certificate = NULL;
-   der_length = 0;
-   out = NULL;
-   ERR("You need to compile signature support in EET.");
-#endif /* ifdef HAVE_SIGNATURE */
-}
-
-Eet_Error
-eet_cipher(const void   *data,
-           unsigned int  size,
-           const char   *key,
-           unsigned int  length,
-           void        **result,
-           unsigned int *result_length)
-{
-#ifdef HAVE_CIPHER
-   /* Cipher declarations */
-   unsigned int *ret = NULL;
-   unsigned char iv[MAX_IV_LEN];
-   unsigned char ik[MAX_KEY_LEN];
-   unsigned char key_material[MAX_IV_LEN + MAX_KEY_LEN];
-   unsigned int salt;
-   unsigned int tmp = 0;
-   int crypted_length;
-   int opened = 0;
-# ifdef HAVE_GNUTLS
-   /* Gcrypt declarations */
-   gcry_error_t err = 0;
-   gcry_cipher_hd_t cipher;
-# else /* ifdef HAVE_GNUTLS */
-   /* Openssl declarations*/
-   EVP_CIPHER_CTX ctx;
-   unsigned int *buffer;
-   int tmp_len;
-# endif /* ifdef HAVE_GNUTLS */
-
-# ifdef HAVE_GNUTLS
-   /* Gcrypt salt generation */
-   gcry_create_nonce((unsigned char *)&salt, sizeof(salt));
-# else /* ifdef HAVE_GNUTLS */
-   /* Openssl salt generation */
-   if (!RAND_bytes((unsigned char *)&salt, sizeof (unsigned int)))
-     return EET_ERROR_PRNG_NOT_SEEDED;
-
-# endif /* ifdef HAVE_GNUTLS */
-
-   eet_pbkdf2_sha1(key,
-                   length,
-                   (unsigned char *)&salt,
-                   sizeof(unsigned int),
-                   2048,
-                   key_material,
-                   MAX_KEY_LEN + MAX_IV_LEN);
-
-   memcpy(iv, key_material, MAX_IV_LEN);
-   memcpy(ik, key_material + MAX_IV_LEN, MAX_KEY_LEN);
-
-   memset(key_material, 0, sizeof (key_material));
-
-   crypted_length = ((((size + sizeof (unsigned int)) >> 5) + 1) << 5);
-   ret = malloc(crypted_length + sizeof(unsigned int));
-   if (!ret)
-     {
-        memset(iv, 0, sizeof (iv));
-        memset(ik, 0, sizeof (ik));
-        memset(&salt, 0, sizeof (salt));
-        return EET_ERROR_OUT_OF_MEMORY;
-     }
-
-   *ret = salt;
-   memset(&salt, 0, sizeof (salt));
-   tmp = htonl(size);
-
-# ifdef HAVE_GNUTLS
-   *(ret + 1) = tmp;
-   memcpy(ret + 2, data, size);
-
-   /* Gcrypt create the corresponding cipher
-      AES with a 256 bit key, Cipher Block Chaining mode */
-   err = gcry_cipher_open(&cipher, GCRY_CIPHER_AES256, GCRY_CIPHER_MODE_CBC, 0);
-   if (err)
-     goto on_error;
-
-   opened = 1;
-   err = gcry_cipher_setiv(cipher, iv, MAX_IV_LEN);
-   if (err)
-     goto on_error;
-
-   err = gcry_cipher_setkey(cipher, ik, MAX_KEY_LEN);
-   if (err)
-     goto on_error;
-
-   memset(iv, 0, sizeof (iv));
-   memset(ik, 0, sizeof (ik));
-
-   /* Gcrypt encrypt */
-   err = gcry_cipher_encrypt(cipher,
-                             (unsigned char *)(ret + 1),
-                             crypted_length,
-                             NULL,
-                             0);
-   if (err)
-     goto on_error;
-
-   /* Gcrypt close the cipher */
-   gcry_cipher_close(cipher);
-# else /* ifdef HAVE_GNUTLS */
-   buffer = alloca(crypted_length);
-   *buffer = tmp;
-
-   memcpy(buffer + 1, data, size);
-
-   /* Openssl create the corresponding cipher
-      AES with a 256 bit key, Cipher Block Chaining mode */
-   EVP_CIPHER_CTX_init(&ctx);
-   if (!EVP_EncryptInit_ex(&ctx, EVP_aes_256_cbc(), NULL, ik, iv))
-     goto on_error;
-
-   opened = 1;
-
-   memset(iv, 0, sizeof (iv));
-   memset(ik, 0, sizeof (ik));
-
-   /* Openssl encrypt */
-   if (!EVP_EncryptUpdate(&ctx, (unsigned char *)(ret + 1), &tmp_len,
-                          (unsigned char *)buffer,
-                          size + sizeof(unsigned int)))
-     goto on_error;
-
-   /* Openssl close the cipher */
-   if (!EVP_EncryptFinal_ex(&ctx, ((unsigned char *)(ret + 1)) + tmp_len,
-                            &tmp_len))
-     goto on_error;
-
-   EVP_CIPHER_CTX_cleanup(&ctx);
-# endif /* ifdef HAVE_GNUTLS */
-
-   /* Set return values */
-   if (result_length)
-     *result_length = crypted_length + sizeof(unsigned int);
-
-   if (result)
-     *result = ret;
-   else
-     free(ret);
-
-   return EET_ERROR_NONE;
-
-on_error:
-   memset(iv, 0, sizeof (iv));
-   memset(ik, 0, sizeof (ik));
-
-# ifdef HAVE_GNUTLS
-   /* Gcrypt error */
-   if (opened)
-     gcry_cipher_close(cipher);
-
-# else /* ifdef HAVE_GNUTLS */
-   /* Openssl error */
-   if (opened)
-     EVP_CIPHER_CTX_cleanup(&ctx);
-
-# endif /* ifdef HAVE_GNUTLS */
-   /* General error */
-   free(ret);
-   if (result)
-     *result = NULL;
-
-   if (result_length)
-     *result_length = 0;
-
-   return EET_ERROR_ENCRYPT_FAILED;
-#else /* ifdef HAVE_CIPHER */
-      /* Cipher not supported */
-   (void)data;
-   (void)size;
-   (void)key;
-   (void)length;
-   (void)result;
-   (void)result_length;
-   return EET_ERROR_NOT_IMPLEMENTED;
-#endif /* ifdef HAVE_CIPHER */
-}
-
-Eet_Error
-eet_decipher(const void   *data,
-             unsigned int  size,
-             const char   *key,
-             unsigned int  length,
-             void        **result,
-             unsigned int *result_length)
-{
-#ifdef HAVE_CIPHER
-   const unsigned int *over = data;
-   unsigned int *ret = NULL;
-   unsigned char ik[MAX_KEY_LEN];
-   unsigned char iv[MAX_IV_LEN];
-   unsigned char key_material[MAX_KEY_LEN + MAX_IV_LEN];
-   unsigned int salt;
-   int tmp_len;
-   int tmp = 0;
-
-   /* At least the salt and an AES block */
-   if (size < sizeof(unsigned int) + 16)
-     return EET_ERROR_BAD_OBJECT;
-
-   /* Get the salt */
-   salt = *over;
-
-   /* Generate the iv and the key with the salt */
-   eet_pbkdf2_sha1(key, length, (unsigned char *)&salt,
-                   sizeof(unsigned int), 2048, key_material,
-                   MAX_KEY_LEN + MAX_IV_LEN);
-
-   memcpy(iv, key_material, MAX_IV_LEN);
-   memcpy(ik, key_material + MAX_IV_LEN, MAX_KEY_LEN);
-
-   memset(key_material, 0, sizeof (key_material));
-   memset(&salt, 0, sizeof (salt));
-
-   /* Align to AES block size if size is not align */
-   tmp_len = size - sizeof (unsigned int);
-   if ((tmp_len & 0x1F) != 0)
-     goto on_error;
-
-   ret = malloc(tmp_len);
-   if (!ret)
-     goto on_error;
-
-# ifdef HAVE_GNUTLS
-   gcry_error_t err = 0;
-   gcry_cipher_hd_t cipher;
-
-   /* Gcrypt create the corresponding cipher */
-   err = gcry_cipher_open(&cipher, GCRY_CIPHER_AES256, GCRY_CIPHER_MODE_CBC, 0);
-   if (err)
-     return EET_ERROR_DECRYPT_FAILED;
-
-   err = gcry_cipher_setiv(cipher, iv, MAX_IV_LEN);
-   if (err)
-     goto on_error;
-
-   err = gcry_cipher_setkey(cipher, ik, MAX_KEY_LEN);
-   if (err)
-     goto on_error;
-
-   memset(iv, 0, sizeof (iv));
-   memset(ik, 0, sizeof (ik));
-
-   /* Gcrypt decrypt */
-   err = gcry_cipher_decrypt(cipher, ret, tmp_len,
-                             ((unsigned int *)data) + 1, tmp_len);
-   if (err)
-     goto on_error;
-
-   /* Gcrypt close the cipher */
-   gcry_cipher_close(cipher);
-
-# else /* ifdef HAVE_GNUTLS */
-   EVP_CIPHER_CTX ctx;
-   int opened = 0;
-
-   /* Openssl create the corresponding cipher */
-   EVP_CIPHER_CTX_init(&ctx);
-   opened = 1;
-
-   if (!EVP_DecryptInit_ex(&ctx, EVP_aes_256_cbc(), NULL, ik, iv))
-     goto on_error;
-
-   memset(iv, 0, sizeof (iv));
-   memset(ik, 0, sizeof (ik));
-
-   /* Openssl decrypt */
-   if (!EVP_DecryptUpdate(&ctx, (unsigned char *)ret, &tmp,
-                          (unsigned char *)(over + 1), tmp_len))
-     goto on_error;
-
-   /* Openssl close the cipher*/
-   EVP_CIPHER_CTX_cleanup(&ctx);
-# endif /* ifdef HAVE_GNUTLS */
-   /* Get the decrypted data size */
-   tmp = *ret;
-   tmp = ntohl(tmp);
-   if (tmp > tmp_len)
-     goto on_error;
-
-   /* Update the return values */
-   if (result_length)
-     *result_length = tmp;
-
-   if (result)
-     {
-        *result = NULL;
-        *result = malloc(tmp);
-        if (!*result)
-          goto on_error;
-
-        memcpy(*result, ret + 1, tmp);
-     }
-
-   free(ret);
-
-   return EET_ERROR_NONE;
-
-on_error:
-   memset(iv, 0, sizeof (iv));
-   memset(ik, 0, sizeof (ik));
-
-# ifdef HAVE_GNUTLS
-# else
-   if (opened)
-     EVP_CIPHER_CTX_cleanup(&ctx);
-
-# endif /* ifdef HAVE_GNUTLS */
-   if (result)
-     *result = NULL;
-
-   if (result_length)
-     *result_length = 0;
-
-   if (ret)
-     free(ret);
-
-   return EET_ERROR_DECRYPT_FAILED;
-#else /* ifdef HAVE_CIPHER */
-   (void)data;
-   (void)size;
-   (void)key;
-   (void)length;
-   (void)result;
-   (void)result_length;
-   return EET_ERROR_NOT_IMPLEMENTED;
-#endif /* ifdef HAVE_CIPHER */
-}
-
-#ifdef HAVE_CIPHER
-# ifdef HAVE_GNUTLS
-static Eet_Error
-eet_hmac_sha1(const void    *key,
-              size_t         key_len,
-              const void    *data,
-              size_t         data_len,
-              unsigned char *res)
-{
-   size_t hlen = gcry_md_get_algo_dlen (GCRY_MD_SHA1);
-   gcry_md_hd_t mdh;
-   unsigned char *hash;
-   gpg_error_t err;
-
-   err = gcry_md_open(&mdh, GCRY_MD_SHA1, GCRY_MD_FLAG_HMAC);
-   if (err != GPG_ERR_NO_ERROR)
-     return 1;
-
-   err = gcry_md_setkey(mdh, key, key_len);
-   if (err != GPG_ERR_NO_ERROR)
-     {
-        gcry_md_close(mdh);
-        return 1;
-     }
-
-   gcry_md_write(mdh, data, data_len);
-
-   hash = gcry_md_read(mdh, GCRY_MD_SHA1);
-   if (!hash)
-     {
-        gcry_md_close(mdh);
-        return 1;
-     }
-
-   memcpy(res, hash, hlen);
-
-   gcry_md_close(mdh);
-
-   return 0;
-}
-
-# endif /* ifdef HAVE_GNUTLS */
-
-static Eet_Error
-eet_pbkdf2_sha1(const char          *key,
-                int                  key_len,
-                const unsigned char *salt,
-                unsigned int         salt_len,
-                int                  iter,
-                unsigned char       *res,
-                int                  res_len)
-{
-   unsigned char digest[20];
-   unsigned char tab[4];
-   unsigned char *p = res;
-   unsigned char *buf;
-   unsigned long i;
-   int digest_len = 20;
-   int len = res_len;
-   int tmp_len;
-   int j, k;
-# ifdef HAVE_GNUTLS
-# else
-   HMAC_CTX hctx;
-# endif /* ifdef HAVE_GNUTLS */
-
-   buf = alloca(salt_len + 4);
-   if (!buf)
-     return 1;
-
-   for (i = 1; len; len -= tmp_len, p += tmp_len, i++)
-     {
-        if (len > digest_len)
-          tmp_len = digest_len;
-        else
-          tmp_len = len;
-
-        tab[0] = (unsigned char)(i & 0xff000000) >> 24;
-        tab[1] = (unsigned char)(i & 0x00ff0000) >> 16;
-        tab[2] = (unsigned char)(i & 0x0000ff00) >> 8;
-        tab[3] = (unsigned char)(i & 0x000000ff) >> 0;
-
-# ifdef HAVE_GNUTLS
-        memcpy(buf, salt, salt_len);
-        memcpy(buf + salt_len, tab, 4);
-        eet_hmac_sha1(key, key_len, buf, salt_len + 4, digest);
-# else /* ifdef HAVE_GNUTLS */
-        HMAC_Init(&hctx, key, key_len, EVP_sha1());
-        HMAC_Update(&hctx, salt, salt_len);
-        HMAC_Update(&hctx, tab, 4);
-        HMAC_Final(&hctx, digest, NULL);
-# endif /* ifdef HAVE_GNUTLS */
-        memcpy(p, digest, tmp_len);
-
-        for (j = 1; j < iter; j++)
-          {
-# ifdef HAVE_GNUTLS
-             eet_hmac_sha1(key, key_len, digest, 20, digest);
-# else /* ifdef HAVE_GNUTLS */
-             HMAC(EVP_sha1(), key, key_len, digest, 20, digest, NULL);
-# endif /* ifdef HAVE_GNUTLS */
-             for (k = 0; k < tmp_len; k++)
-               p[k] ^= digest[k];
-          }
-     }
-
-# ifdef HAVE_GNUTLS
-# else
-   HMAC_cleanup(&hctx);
-# endif /* ifdef HAVE_GNUTLS */
-   return 0;
-}
-
-#endif /* ifdef HAVE_CIPHER */
diff --git a/libraries/eet/src/lib/eet_connection.c b/libraries/eet/src/lib/eet_connection.c
deleted file mode 100644
index 7b6b934..0000000
--- a/libraries/eet/src/lib/eet_connection.c
+++ /dev/null
@@ -1,222 +0,0 @@
-#ifdef HAVE_CONFIG_H
-# include <config.h>
-#endif /* ifdef HAVE_CONFIG_H */
-
-#ifdef HAVE_ALLOCA_H
-# include <alloca.h>
-#elif defined __GNUC__
-# define alloca __builtin_alloca
-#elif defined _AIX
-# define alloca __alloca
-#elif defined _MSC_VER
-# include <malloc.h>
-# define alloca _alloca
-#else /* ifdef HAVE_ALLOCA_H */
-# include <stddef.h>
-# ifdef  __cplusplus
-extern "C"
-# endif /* ifdef  __cplusplus */
-void *alloca(size_t);
-#endif /* ifdef HAVE_ALLOCA_H */
-
-#include <string.h>
-#include <stdlib.h>
-
-#ifdef HAVE_NETINET_IN_H
-# include <netinet/in.h>
-#endif /* ifdef HAVE_NETINET_IN_H */
-
-#ifdef _WIN32
-# include <winsock2.h>
-#endif /* ifdef _WIN32 */
-
-#include <Eina.h>
-
-#include "Eet.h"
-#include "Eet_private.h"
-
-/* max message size: 1Mb - raised from original 64Kb */
-#define MAX_MSG_SIZE (1024 * 1024)
-#define MAGIC_EET_DATA_PACKET 0x4270ACE1
-
-struct _Eet_Connection
-{
-   Eet_Read_Cb  *eet_read_cb;
-   Eet_Write_Cb *eet_write_cb;
-   void         *user_data;
-
-   size_t        allocated;
-   size_t        size;
-   size_t        received;
-
-   void         *buffer;
-};
-
-EAPI Eet_Connection *
-eet_connection_new(Eet_Read_Cb  *eet_read_cb,
-                   Eet_Write_Cb *eet_write_cb,
-                   const void   *user_data)
-{
-   Eet_Connection *conn;
-   
-   if ((!eet_read_cb) || (!eet_write_cb)) return NULL;
-   
-   conn = calloc(1, sizeof (Eet_Connection));
-   if (!conn) return NULL;
-   conn->eet_read_cb = eet_read_cb;
-   conn->eet_write_cb = eet_write_cb;
-   conn->user_data = (void *)user_data;
-   return conn;
-}
-
-EAPI int
-eet_connection_received(Eet_Connection *conn,
-                        const void     *data,
-                        size_t          size)
-{
-   if ((!conn) || (!data) || (!size)) return size;
-   do
-     {
-        size_t copy_size;
-        
-        if (conn->size == 0)
-          {
-             const int *msg;
-             size_t packet_size;
-             
-             if (size < (sizeof(int) * 2)) break;
-
-             msg = data;
-             /* Check the magic */
-             if (ntohl(msg[0]) != MAGIC_EET_DATA_PACKET) break;
-
-             packet_size = ntohl(msg[1]);
-             /* Message should always be under MAX_MSG_SIZE */
-             if (packet_size > MAX_MSG_SIZE) break;
-
-             data = (void *)(msg + 2);
-             size -= sizeof(int) * 2;
-             if ((size_t)packet_size <= size)
-               {
-                  /* Not a partial receive, go the quick way. */
-                  if (!conn->eet_read_cb(data, packet_size, conn->user_data))
-                    break;
-                  
-                  data = (void *)((char *)data + packet_size);
-                  size -= packet_size;
-                  conn->received = 0;
-                  continue;
-               }
-             conn->size = packet_size;
-             if (conn->allocated < conn->size)
-               {
-                  void *tmp;
-                  
-                  tmp = realloc(conn->buffer, conn->size);
-                  if (!tmp) break;
-                  conn->buffer = tmp;
-                  conn->allocated = conn->size;
-               }
-          }
-
-        /* Partial receive */
-        copy_size =
-          (conn->size - conn->received >=
-              size) ? size : conn->size - conn->received;
-        memcpy((char *)conn->buffer + conn->received, data, copy_size);
-        
-        conn->received += copy_size;
-        data = (void *)((char *)data + copy_size);
-        size -= copy_size;
-        
-        if (conn->received == conn->size)
-          {
-             size_t data_size;
-             
-             data_size = conn->size;
-             conn->size = 0;
-             conn->received = 0;
-             /* Completed a packet. */
-             if (!conn->eet_read_cb(conn->buffer, data_size, conn->user_data))
-               {
-                  /* Something goes wrong. Stop now. */
-                  size += data_size;
-                  break;
-               }
-          }
-     }
-   while (size > 0);
-   
-   return size;
-}
-
-static Eina_Bool
-_eet_connection_raw_send(Eet_Connection *conn,
-                         void           *data,
-                         int             data_size)
-{
-   int *message;
-
-   /* Message should always be under MAX_MSG_SIZE */
-   if (data_size > MAX_MSG_SIZE) return EINA_FALSE;
-   message = alloca(data_size + (sizeof(int) * 2));
-   message[0] = htonl(MAGIC_EET_DATA_PACKET);
-   message[1] = htonl(data_size);
-   memcpy(message + 2, data, data_size);
-   conn->eet_write_cb(message,
-                      data_size + (sizeof(int) * 2),
-                      conn->user_data);
-   return EINA_TRUE;
-}
-
-EAPI Eina_Bool
-eet_connection_send(Eet_Connection      *conn,
-                    Eet_Data_Descriptor *edd,
-                    const void          *data_in,
-                    const char          *cipher_key)
-{
-   void *flat_data;
-   int data_size;
-   Eina_Bool ret = EINA_FALSE;
-
-   flat_data = eet_data_descriptor_encode_cipher(edd,
-                                                 data_in,
-                                                 cipher_key,
-                                                 &data_size);
-   if (!flat_data) return EINA_FALSE;
-   if (_eet_connection_raw_send(conn, flat_data, data_size)) ret = EINA_TRUE;
-   free(flat_data);
-   return ret;
-}
-
-EAPI Eina_Bool
-eet_connection_node_send(Eet_Connection *conn,
-                         Eet_Node       *node,
-                         const char     *cipher_key)
-{
-   void *data;
-   int data_size;
-   Eina_Bool ret = EINA_FALSE;
-
-   data = eet_data_node_encode_cipher(node, cipher_key, &data_size);
-   if (!data) return EINA_FALSE;
-   if (_eet_connection_raw_send(conn, data, data_size))
-     ret = EINA_TRUE;
-   free(data);
-   return ret;
-}
-
-EAPI void *
-eet_connection_close(Eet_Connection *conn,
-                     Eina_Bool      *on_going)
-{
-   void *user_data;
-
-   if (!conn) return NULL;
-   if (on_going) *on_going = conn->received == 0 ? EINA_FALSE : EINA_TRUE;
-   user_data = conn->user_data;
-   free(conn->buffer);
-   free(conn);
-   return user_data;
-}
-
diff --git a/libraries/eet/src/lib/eet_data.c b/libraries/eet/src/lib/eet_data.c
deleted file mode 100644
index d502f44..0000000
--- a/libraries/eet/src/lib/eet_data.c
+++ /dev/null
@@ -1,4986 +0,0 @@
-#ifdef HAVE_CONFIG_H
-# include <config.h>
-#endif /* ifdef HAVE_CONFIG_H */
-
-#include <stdio.h>
-#include <string.h>
-#include <math.h>
-#include <ctype.h>
-#include <limits.h>
-
-#ifdef HAVE_NETINET_IN_H
-# include <netinet/in.h>
-#endif /* ifdef HAVE_NETINET_IN_H */
-
-#ifdef _WIN32
-# include <winsock2.h>
-#endif /* ifdef _WIN32 */
-
-#include <Eina.h>
-
-#include "Eet.h"
-#include "Eet_private.h"
-
-/*
- * routines for doing data -> struct and struct -> data conversion
- *
- * types:
- *
- * basic types:
- *   a sequence of...
- *
- *   char
- *   short
- *   int
- *   long long
- *   float
- *   double
- *   unsigned char
- *   unsigned short
- *   unsigned int
- *   unsgined long long
- *   string
- *
- * groupings:
- *   multiple entries ordered as...
- *
- *   fixed size array    [ of basic types ]
- *   variable size array [ of basic types ]
- *   linked list         [ of basic types ]
- *   hash table          [ of basic types ]
- *
- * need to provide builder/accessor funcs for:
- *
- *   list_next
- *   list_append
- *
- *   hash_foreach
- *   hash_add
- *
- */
-
-/*---*/
-
-typedef struct _Eet_Data_Element          Eet_Data_Element;
-typedef struct _Eet_Data_Basic_Type_Codec Eet_Data_Basic_Type_Codec;
-typedef struct _Eet_Data_Group_Type_Codec Eet_Data_Group_Type_Codec;
-typedef struct _Eet_Data_Chunk            Eet_Data_Chunk;
-typedef struct _Eet_Data_Stream           Eet_Data_Stream;
-typedef struct _Eet_Data_Descriptor_Hash  Eet_Data_Descriptor_Hash;
-typedef struct _Eet_Data_Encode_Hash_Info Eet_Data_Encode_Hash_Info;
-typedef struct _Eet_Free                  Eet_Free;
-typedef struct _Eet_Free_Context          Eet_Free_Context;
-typedef struct _Eet_Variant_Unknow        Eet_Variant_Unknow;
-
-/*---*/
-
-/* TODO:
- * Eet_Data_Basic_Type_Codec (Coder, Decoder)
- * Eet_Data_Group_Type_Codec (Coder, Decoder)
- */
-struct _Eet_Data_Basic_Type_Codec
-{
-   int         size;
-   const char *name;
-   int         (*get)(const Eet_Dictionary *ed,
-                      const void           *src,
-                      const void           *src_end,
-                      void                 *dest);
-   void      * (*put)(Eet_Dictionary *ed, const void *src, int *size_ret);
-};
-
-struct _Eet_Data_Group_Type_Codec
-{
-   int  (*get)(Eet_Free_Context *context,
-               const             Eet_Dictionary *ed,
-               Eet_Data_Descriptor *edd,
-               Eet_Data_Element *ede,
-               Eet_Data_Chunk *echnk,
-               int               type,
-               int               group_type,
-               void             *data_in,
-               char            **p,
-               int              *size);
-   void (*put)(Eet_Dictionary *ed,
-               Eet_Data_Descriptor *edd,
-               Eet_Data_Element *ede,
-               Eet_Data_Stream *ds,
-               void           *data_in);
-};
-
-struct _Eet_Data_Chunk
-{
-   char         *name;
-   int           len;
-   int           size;
-   int           hash;
-   void         *data;
-   unsigned char type;
-   unsigned char group_type;
-};
-
-struct _Eet_Data_Stream
-{
-   void *data;
-   int   size;
-   int   pos;
-};
-
-struct _Eet_Data_Descriptor_Hash
-{
-   Eet_Data_Element         *element;
-   Eet_Data_Descriptor_Hash *next;
-};
-
-struct _Eet_Data_Descriptor
-{
-   const char           *name;
-   const Eet_Dictionary *ed;
-   int                   size;
-   struct
-   {
-      void      * (*mem_alloc)(size_t size);
-      void        (*mem_free)(void *mem);
-      char      * (*str_alloc)(const char *str);
-      char      * (*str_direct_alloc)(const char *str);
-      void        (*str_free)(const char *str);
-      void        (*str_direct_free)(const char *str);
-      void      * (*list_next)(void *l);
-      void      * (*list_append)(void *l, void *d);
-      void      * (*list_data)(void *l);
-      void      * (*list_free)(void *l);
-      void        (*hash_foreach)(void *h,
-                                  int (*func)(void *h,
-                                              const char *k,
-                                              void       *dt,
-                                              void       *fdt),
-                                  void *fdt);
-      void      * (*hash_add)(void *h, const char *k, void *d);
-      void        (*hash_free)(void *h);
-      const char *(*type_get)(const void *data, Eina_Bool *unknow);
-      Eina_Bool   (*type_set)(const char *type,
-                              void       *data,
-                              Eina_Bool   unknow);
-      void      * (*array_alloc)(size_t size);
-      void        (*array_free)(void *mem);
-   } func;
-   struct
-   {
-      int               num;
-      Eet_Data_Element *set;
-      struct
-      {
-         int                       size;
-         Eet_Data_Descriptor_Hash *buckets;
-      } hash;
-   } elements;
-
-   Eina_Bool unified_type : 1;
-//   char *strings;
-//   int   strings_len;
-};
-
-struct _Eet_Data_Element
-{
-   const char          *name;
-   const char          *counter_name;
-   const char          *directory_name_ptr;
-   Eet_Data_Descriptor *subtype;
-   int                  offset;  /* offset in bytes from the base element */
-   int                  count;  /* number of elements for a fixed array */
-   int                  counter_offset;  /* for a variable array we need the offset of the count variable */
-   unsigned char        type;  /* EET_T_XXX */
-   unsigned char        group_type;  /* EET_G_XXX */
-};
-
-struct _Eet_Data_Encode_Hash_Info
-{
-   Eet_Data_Stream  *ds;
-   Eet_Data_Element *ede;
-   Eet_Dictionary   *ed;
-};
-
-#define EET_FREE_COUNT 256
-struct _Eet_Free
-{
-   int        ref;
-   Eina_Array list[EET_FREE_COUNT];
-};
-
-struct _Eet_Free_Context
-{
-   Eet_Free freelist;
-   Eet_Free freelist_array;
-   Eet_Free freelist_list;
-   Eet_Free freelist_hash;
-   Eet_Free freelist_str;
-   Eet_Free freelist_direct_str;
-};
-
-struct _Eet_Variant_Unknow
-{
-   EINA_MAGIC
-
-   int  size;
-   char data[1];
-};
-
-/*---*/
-
-static void
- eet_free_context_init(Eet_Free_Context *context);
-static void
- eet_free_context_shutdown(Eet_Free_Context *context);
-
-static int
-eet_data_get_char(const Eet_Dictionary *ed,
-                  const void           *src,
-                  const void           *src_end,
-                  void                 *dest);
-static void *
-eet_data_put_char(Eet_Dictionary *ed,
-                  const void     *src,
-                  int            *size_ret);
-static int
-eet_data_get_short(const Eet_Dictionary *ed,
-                   const void           *src,
-                   const void           *src_end,
-                   void                 *dest);
-static void *
-eet_data_put_short(Eet_Dictionary *ed,
-                   const void     *src,
-                   int            *size_ret);
-static inline int
-eet_data_get_int(const Eet_Dictionary *ed,
-                 const void           *src,
-                 const void           *src_end,
-                 void                 *dest);
-static void *
-eet_data_put_int(Eet_Dictionary *ed,
-                 const void     *src,
-                 int            *size_ret);
-static int
-eet_data_get_long_long(const Eet_Dictionary *ed,
-                       const void           *src,
-                       const void           *src_end,
-                       void                 *dest);
-static void *
-eet_data_put_long_long(Eet_Dictionary *ed,
-                       const void     *src,
-                       int            *size_ret);
-static int
-eet_data_get_float(const Eet_Dictionary *ed,
-                   const void           *src,
-                   const void           *src_end,
-                   void                 *dest);
-static void *
-eet_data_put_float(Eet_Dictionary *ed,
-                   const void     *src,
-                   int            *size_ret);
-static int
-eet_data_get_double(const Eet_Dictionary *ed,
-                    const void           *src,
-                    const void           *src_end,
-                    void                 *dest);
-static void *
-eet_data_put_double(Eet_Dictionary *ed,
-                    const void     *src,
-                    int            *size_ret);
-static int
-eet_data_get_f32p32(const Eet_Dictionary *ed,
-                    const void           *src,
-                    const void           *src_end,
-                    void                 *dest);
-static void *
-eet_data_put_f32p32(Eet_Dictionary *ed,
-                    const void     *src,
-                    int            *size_ret);
-static int
-eet_data_get_f16p16(const Eet_Dictionary *ed,
-                    const void           *src,
-                    const void           *src_end,
-                    void                 *dest);
-static void *
-eet_data_put_f16p16(Eet_Dictionary *ed,
-                    const void     *src,
-                    int            *size_ret);
-static int
-eet_data_get_f8p24(const Eet_Dictionary *ed,
-                   const void           *src,
-                   const void           *src_end,
-                   void                 *dest);
-static void *
-eet_data_put_f8p24(Eet_Dictionary *ed,
-                   const void     *src,
-                   int            *size_ret);
-static inline int
-eet_data_get_string(const Eet_Dictionary *ed,
-                    const void           *src,
-                    const void           *src_end,
-                    void                 *dest);
-static void *
-eet_data_put_string(Eet_Dictionary *ed,
-                    const void     *src,
-                    int            *size_ret);
-static int
-eet_data_get_istring(const Eet_Dictionary *ed,
-                     const void           *src,
-                     const void           *src_end,
-                     void                 *dest);
-static void *
-eet_data_put_istring(Eet_Dictionary *ed,
-                     const void     *src,
-                     int            *size_ret);
-static int
-eet_data_get_null(const Eet_Dictionary *ed,
-                  const void           *src,
-                  const void           *src_end,
-                  void                 *dest);
-static void *
-eet_data_put_null(Eet_Dictionary *ed,
-                  const void     *src,
-                  int            *size_ret);
-
-static int
-eet_data_get_type(const Eet_Dictionary *ed,
-                  int                   type,
-                  const void           *src,
-                  const void           *src_end,
-                  void                 *dest);
-static void *
-eet_data_put_type(Eet_Dictionary *ed,
-                  int             type,
-                  const void     *src,
-                  int            *size_ret);
-
-static Eet_Node *
-eet_data_node_simple_type(int         type,
-                          const char *name,
-                          void       *dd);
-
-static int
-eet_data_get_unknown(Eet_Free_Context     *context,
-                     const Eet_Dictionary *ed,
-                     Eet_Data_Descriptor  *edd,
-                     Eet_Data_Element     *ede,
-                     Eet_Data_Chunk       *echnk,
-                     int                   type,
-                     int                   group_type,
-                     void                 *data_in,
-                     char                **p,
-                     int                  *size);
-static void
-eet_data_put_unknown(Eet_Dictionary      *ed,
-                     Eet_Data_Descriptor *edd,
-                     Eet_Data_Element    *ede,
-                     Eet_Data_Stream     *ds,
-                     void                *data_in);
-static void
-eet_data_put_array(Eet_Dictionary      *ed,
-                   Eet_Data_Descriptor *edd,
-                   Eet_Data_Element    *ede,
-                   Eet_Data_Stream     *ds,
-                   void                *data_in);
-static int
-eet_data_get_array(Eet_Free_Context     *context,
-                   const Eet_Dictionary *ed,
-                   Eet_Data_Descriptor  *edd,
-                   Eet_Data_Element     *ede,
-                   Eet_Data_Chunk       *echnk,
-                   int                   type,
-                   int                   group_type,
-                   void                 *data,
-                   char                **p,
-                   int                  *size);
-static int
-eet_data_get_list(Eet_Free_Context     *context,
-                  const Eet_Dictionary *ed,
-                  Eet_Data_Descriptor  *edd,
-                  Eet_Data_Element     *ede,
-                  Eet_Data_Chunk       *echnk,
-                  int                   type,
-                  int                   group_type,
-                  void                 *data_in,
-                  char                **p,
-                  int                  *size);
-static void
-eet_data_put_list(Eet_Dictionary      *ed,
-                  Eet_Data_Descriptor *edd,
-                  Eet_Data_Element    *ede,
-                  Eet_Data_Stream     *ds,
-                  void                *data_in);
-static void
-eet_data_put_hash(Eet_Dictionary      *ed,
-                  Eet_Data_Descriptor *edd,
-                  Eet_Data_Element    *ede,
-                  Eet_Data_Stream     *ds,
-                  void                *data_in);
-static int
-eet_data_get_hash(Eet_Free_Context     *context,
-                  const Eet_Dictionary *ed,
-                  Eet_Data_Descriptor  *edd,
-                  Eet_Data_Element     *ede,
-                  Eet_Data_Chunk       *echnk,
-                  int                   type,
-                  int                   group_type,
-                  void                 *data,
-                  char                **p,
-                  int                  *size);
-static void
-eet_data_put_union(Eet_Dictionary      *ed,
-                   Eet_Data_Descriptor *edd,
-                   Eet_Data_Element    *ede,
-                   Eet_Data_Stream     *ds,
-                   void                *data_in);
-static int
-eet_data_get_union(Eet_Free_Context     *context,
-                   const Eet_Dictionary *ed,
-                   Eet_Data_Descriptor  *edd,
-                   Eet_Data_Element     *ede,
-                   Eet_Data_Chunk       *echnk,
-                   int                   type,
-                   int                   group_type,
-                   void                 *data,
-                   char                **p,
-                   int                  *size);
-static void
-eet_data_put_variant(Eet_Dictionary      *ed,
-                     Eet_Data_Descriptor *edd,
-                     Eet_Data_Element    *ede,
-                     Eet_Data_Stream     *ds,
-                     void                *data_in);
-static int
-eet_data_get_variant(Eet_Free_Context     *context,
-                     const Eet_Dictionary *ed,
-                     Eet_Data_Descriptor  *edd,
-                     Eet_Data_Element     *ede,
-                     Eet_Data_Chunk       *echnk,
-                     int                   type,
-                     int                   group_type,
-                     void                 *data,
-                     char                **p,
-                     int                  *size);
-
-static void
-eet_data_chunk_get(const Eet_Dictionary *ed,
-                   Eet_Data_Chunk       *chnk,
-                   const void           *src,
-                   int                   size);
-static Eet_Data_Chunk *
-eet_data_chunk_new(void       *data,
-                   int         size,
-                   const char *name,
-                   int         type,
-                   int         group_type);
-static void
-eet_data_chunk_free(Eet_Data_Chunk *chnk);
-
-static Eet_Data_Stream *
- eet_data_stream_new(void);
-static void
- eet_data_stream_write(Eet_Data_Stream *ds,
-                      const void       *data,
-                      int               size);
-static void
-eet_data_stream_free(Eet_Data_Stream *ds);
-
-static void
-eet_data_chunk_put(Eet_Dictionary  *ed,
-                   Eet_Data_Chunk  *chnk,
-                   Eet_Data_Stream *ds);
-
-static int
-eet_data_descriptor_encode_hash_cb(void       *hash,
-                                   const char *key,
-                                   void       *hdata,
-                                   void       *fdata);
-static void *_eet_data_descriptor_encode(Eet_Dictionary      *ed,
-                                         Eet_Data_Descriptor *edd,
-                                         const void          *data_in,
-                                         int                 *size_ret);
-static void *_eet_data_descriptor_decode(Eet_Free_Context     *context,
-                                         const Eet_Dictionary *ed,
-                                         Eet_Data_Descriptor  *edd,
-                                         const void           *data_in,
-                                         int                   size_in,
-                                         void                 *data_out,
-                                         int                   size_out);
-
-/*---*/
-
-static const Eet_Data_Basic_Type_Codec eet_basic_codec[] =
-{
-   {sizeof(char), "char", eet_data_get_char, eet_data_put_char     },
-   {sizeof(short), "short", eet_data_get_short, eet_data_put_short    },
-   {sizeof(int), "int", eet_data_get_int, eet_data_put_int      },
-   {sizeof(long long), "long_long", eet_data_get_long_long, eet_data_put_long_long},
-   {sizeof(float), "float", eet_data_get_float, eet_data_put_float    },
-   {sizeof(double), "double", eet_data_get_double, eet_data_put_double   },
-   {sizeof(char), "uchar", eet_data_get_char, eet_data_put_char     },
-   {sizeof(short), "ushort", eet_data_get_short, eet_data_put_short    },
-   {sizeof(int), "uint", eet_data_get_int, eet_data_put_int      },
-   {sizeof(long long), "ulong_long", eet_data_get_long_long, eet_data_put_long_long},
-   {sizeof(char *), "string", eet_data_get_string, eet_data_put_string   },
-   {sizeof(char *), "inlined", eet_data_get_istring, eet_data_put_istring  },
-   {sizeof(void *), "NULL", eet_data_get_null, eet_data_put_null     },
-   {sizeof(Eina_F32p32), "f32p32", eet_data_get_f32p32, eet_data_put_f32p32   },
-   {sizeof(Eina_F16p16), "f16p16", eet_data_get_f16p16, eet_data_put_f16p16   },
-   {sizeof(Eina_F8p24), "f8p24", eet_data_get_f8p24, eet_data_put_f8p24    }
-};
-
-static const Eet_Data_Group_Type_Codec eet_group_codec[] =
-{
-   { eet_data_get_unknown, eet_data_put_unknown },
-   { eet_data_get_array, eet_data_put_array },
-   { eet_data_get_array, eet_data_put_array },
-   { eet_data_get_list, eet_data_put_list },
-   { eet_data_get_hash, eet_data_put_hash },
-   { eet_data_get_union, eet_data_put_union },
-   { eet_data_get_variant, eet_data_put_variant }
-};
-
-static int _eet_data_words_bigendian = -1;
-
-/*---*/
-
-#define SWAP64(x) (x) =                                        \
-  ((((unsigned long long)(x) & 0x00000000000000ffULL) << 56) | \
-   (((unsigned long long)(x) & 0x000000000000ff00ULL) << 40) | \
-   (((unsigned long long)(x) & 0x0000000000ff0000ULL) << 24) | \
-   (((unsigned long long)(x) & 0x00000000ff000000ULL) << 8) |  \
-   (((unsigned long long)(x) & 0x000000ff00000000ULL) >> 8) |  \
-   (((unsigned long long)(x) & 0x0000ff0000000000ULL) >> 24) | \
-   (((unsigned long long)(x) & 0x00ff000000000000ULL) >> 40) | \
-   (((unsigned long long)(x) & 0xff00000000000000ULL) >> 56))
-#define SWAP32(x) (x) =              \
-  ((((int)(x) & 0x000000ff) << 24) | \
-   (((int)(x) & 0x0000ff00) << 8) |  \
-   (((int)(x) & 0x00ff0000) >> 8) |  \
-   (((int)(x) & 0xff000000) >> 24))
-#define SWAP16(x) (x) =           \
-  ((((short)(x) & 0x00ff) << 8) | \
-   (((short)(x) & 0xff00) >> 8))
-
-#ifdef CONV8
-# undef CONV8
-#endif /* ifdef CONV8 */
-#ifdef CONV16
-# undef CONV16
-#endif /* ifdef CONV16 */
-#ifdef CONV32
-# undef CONV32
-#endif /* ifdef CONV32 */
-#ifdef CONV64
-# undef CONV64
-#endif /* ifdef CONV64 */
-
-#define CONV8(x)
-#define CONV16(x)             {if (_eet_data_words_bigendian) {SWAP16(x); }}
-#define CONV32(x)             {if (_eet_data_words_bigendian) {SWAP32(x); }}
-#define CONV64(x)             {if (_eet_data_words_bigendian) {SWAP64(x); }}
-
-#define IS_SIMPLE_TYPE(Type)  (Type > EET_T_UNKNOW && Type < EET_T_LAST)
-#define IS_POINTER_TYPE(Type) (Type >= EET_T_STRING && Type <= EET_T_NULL)
-
-#define POINTER_TYPE_DECODE(Context,                    \
-                            Ed,                         \
-                            Edd,                        \
-                            Ede,                        \
-                            Echnk,                      \
-                            Type,                       \
-                            Data,                       \
-                            P,                          \
-                            Size,                       \
-                            Label)                      \
-  do {                                                  \
-       int ___r;                                        \
-       ___r = eet_data_get_unknown(Context,             \
-                                   Ed,                  \
-                                   Edd, Ede,            \
-                                   Echnk,               \
-                                   Type, EET_G_UNKNOWN, \
-                                   Data, P, Size);      \
-       if (!___r) { goto Label; }                       \
-    } while (0)
-
-#define STRUCT_TYPE_DECODE(Data_Ret, Context, Ed, Ede, Data, Size, SubSize, Label) \
-  do {                                                                             \
-       Data_Ret = _eet_data_descriptor_decode(Context,                             \
-                                              Ed,                                  \
-                                              Ede,                                 \
-                                              Data,                                \
-                                              Size,                                \
-                                              SubSize > 0 ? Data_Ret : NULL,       \
-                                              SubSize);                            \
-       if (!Data_Ret) { goto Label; }                                              \
-    } while (0)
-
-#define EET_I_STRING         1 << 4
-#define EET_I_INLINED_STRING 2 << 4
-#define EET_I_NULL           3 << 4
-
-#define EET_MAGIC_VARIANT    0xF1234BC
-/*---*/
-
-/* CHAR TYPE */
-static int
-eet_data_get_char(const Eet_Dictionary *ed __UNUSED__,
-                  const void           *src,
-                  const void           *src_end,
-                  void                 *dst)
-{
-   char *s, *d;
-
-   if (((char *)src + sizeof(char)) > (char *)src_end)
-     return -1;
-
-   s = (char *)src;
-   d = (char *)dst;
-   *d = *s;
-   CONV8(*d);
-   return sizeof(char);
-}
-
-static void *
-eet_data_put_char(Eet_Dictionary *ed __UNUSED__,
-                  const void     *src,
-                  int            *size_ret)
-{
-   char *s, *d;
-
-   d = (char *)malloc(sizeof(char));
-   if (!d)
-     return NULL;
-
-   s = (char *)src;
-   *d = *s;
-   CONV8(*d);
-   *size_ret = sizeof(char);
-   return d;
-}
-
-/* SHORT TYPE */
-static int
-eet_data_get_short(const Eet_Dictionary *ed __UNUSED__,
-                   const void           *src,
-                   const void           *src_end,
-                   void                 *dst)
-{
-   short *d;
-
-   if (((char *)src + sizeof(short)) > (char *)src_end)
-     return -1;
-
-   memcpy(dst, src, sizeof(short));
-   d = (short *)dst;
-   CONV16(*d);
-   return sizeof(short);
-}
-
-static void *
-eet_data_put_short(Eet_Dictionary *ed __UNUSED__,
-                   const void     *src,
-                   int            *size_ret)
-{
-   short *s, *d;
-
-   d = (short *)malloc(sizeof(short));
-   if (!d)
-     return NULL;
-
-   s = (short *)src;
-   *d = *s;
-   CONV16(*d);
-   *size_ret = sizeof(short);
-   return d;
-}
-
-/* INT TYPE */
-static inline int
-eet_data_get_int(const Eet_Dictionary *ed __UNUSED__,
-                 const void           *src,
-                 const void           *src_end,
-                 void                 *dst)
-{
-   int *d;
-
-   if (((char *)src + sizeof(int)) > (char *)src_end)
-     return -1;
-
-   memcpy(dst, src, sizeof(int));
-   d = (int *)dst;
-   CONV32(*d);
-   return sizeof(int);
-}
-
-static void *
-eet_data_put_int(Eet_Dictionary *ed __UNUSED__,
-                 const void     *src,
-                 int            *size_ret)
-{
-   int *s, *d;
-
-   d = (int *)malloc(sizeof(int));
-   if (!d)
-     return NULL;
-
-   s = (int *)src;
-   *d = *s;
-   CONV32(*d);
-   *size_ret = sizeof(int);
-   return d;
-}
-
-/* LONG LONG TYPE */
-static int
-eet_data_get_long_long(const Eet_Dictionary *ed __UNUSED__,
-                       const void           *src,
-                       const void           *src_end,
-                       void                 *dst)
-{
-   unsigned long long *d;
-
-   if (((char *)src + sizeof(unsigned long long)) > (char *)src_end)
-     return -1;
-
-   memcpy(dst, src, sizeof(unsigned long long));
-   d = (unsigned long long *)dst;
-   CONV64(*d);
-   return sizeof(unsigned long long);
-}
-
-static void *
-eet_data_put_long_long(Eet_Dictionary *ed __UNUSED__,
-                       const void     *src,
-                       int            *size_ret)
-{
-   unsigned long long *s, *d;
-
-   d = (unsigned long long *)malloc(sizeof(unsigned long long));
-   if (!d)
-     return NULL;
-
-   s = (unsigned long long *)src;
-   *d = *s;
-   CONV64(*d);
-   *size_ret = sizeof(unsigned long long);
-   return d;
-}
-
-/* STRING TYPE */
-static inline int
-eet_data_get_string_hash(const Eet_Dictionary *ed,
-                         const void           *src,
-                         const void           *src_end)
-{
-   if (ed)
-     {
-        int idx;
-
-        if (eet_data_get_int(ed, src, src_end, &idx) < 0)
-          return -1;
-
-        return eet_dictionary_string_get_hash(ed, idx);
-     }
-
-   return -1;
-}
-
-static inline int
-eet_data_get_string(const Eet_Dictionary *ed,
-                    const void           *src,
-                    const void           *src_end,
-                    void                 *dst)
-{
-   char *s, **d;
-
-   d = (char **)dst;
-
-   if (ed)
-     {
-        const char *str;
-        int idx;
-
-        if (eet_data_get_int(ed, src, src_end, &idx) < 0)
-          return -1;
-
-        str = eet_dictionary_string_get_char(ed, idx);
-        if (!str)
-          return -1;
-
-        *d = (char *)str;
-        return eet_dictionary_string_get_size(ed, idx);
-     }
-
-   s = (char *)src;
-   if (!s)
-     {
-        *d = NULL;
-        return 0;
-     }
-
-   *d = s;
-   return strlen(s) + 1;
-}
-
-static void *
-eet_data_put_string(Eet_Dictionary *ed,
-                    const void     *src,
-                    int            *size_ret)
-{
-   char *s, *d;
-   int len;
-
-   if (ed)
-     {
-        const char *str;
-        int idx;
-
-        str = *((const char **)src);
-        if (!str)
-          return NULL;
-
-        idx = eet_dictionary_string_add(ed, str);
-        if (idx == -1)
-          return NULL;
-
-        return eet_data_put_int(ed, &idx, size_ret);
-     }
-
-   s = (char *)(*((char **)src));
-   if (!s)
-     return NULL;
-
-   len = strlen(s);
-   d = malloc(len + 1);
-   if (!d)
-     return NULL;
-
-   memcpy(d, s, len + 1);
-   *size_ret = len + 1;
-   return d;
-}
-
-/* ALWAYS INLINED STRING TYPE */
-static int
-eet_data_get_istring(const Eet_Dictionary *ed __UNUSED__,
-                     const void           *src,
-                     const void           *src_end,
-                     void                 *dst)
-{
-   return eet_data_get_string(NULL, src, src_end, dst);
-}
-
-static void *
-eet_data_put_istring(Eet_Dictionary *ed __UNUSED__,
-                     const void     *src,
-                     int            *size_ret)
-{
-   return eet_data_put_string(NULL, src, size_ret);
-}
-
-/* ALWAYS NULL TYPE */
-static int
-eet_data_get_null(const Eet_Dictionary *ed __UNUSED__,
-                  const void           *src __UNUSED__,
-                  const void           *src_end __UNUSED__,
-                  void                 *dst)
-{
-   char **d;
-
-   d = (char **)dst;
-
-   *d = NULL;
-   return 1;
-}
-
-static void *
-eet_data_put_null(Eet_Dictionary *ed __UNUSED__,
-                  const void     *src __UNUSED__,
-                  int            *size_ret)
-{
-   *size_ret = 0;
-   return NULL;
-}
-
-/**
- * Fast lookups of simple doubles/floats.
- *
- * These aren't properly a cache because they don't store pre-calculated
- * values, but have a so simple math that is almost as fast.
- */
-static inline int
-_eet_data_float_cache_get(const char *s,
-                          int         len,
-                          float      *d)
-{
-   /* fast handle of simple case 0xMp+E*/
-    if ((len == 6) && (s[0] == '0') && (s[1] == 'x') && (s[3] == 'p'))
-      {
-         int mantisse = (s[2] >= 'a') ? (s[2] - 'a' + 10) : (s[2] - '0');
-         int exponent = (s[5] - '0');
-
-         if (s[4] == '+')
-           *d = (float)(mantisse << exponent);
-         else
-           *d = (float)mantisse / (float)(1 << exponent);
-
-         return 1;
-      }
-
-    return 0;
-}
-
-static inline int
-_eet_data_double_cache_get(const char *s,
-                           int         len,
-                           double     *d)
-{
-   /* fast handle of simple case 0xMp+E*/
-    if ((len == 6) && (s[0] == '0') && (s[1] == 'x') && (s[3] == 'p'))
-      {
-         int mantisse = (s[2] >= 'a') ? (s[2] - 'a' + 10) : (s[2] - '0');
-         int exponent = (s[5] - '0');
-
-         if (s[4] == '+')
-           *d = (double)(mantisse << exponent);
-         else
-           *d = (double)mantisse / (double)(1 << exponent);
-
-         return 1;
-      }
-
-    return 0;
-}
-
-/* FLOAT TYPE */
-static int
-eet_data_get_float(const Eet_Dictionary *ed,
-                   const void           *src,
-                   const void           *src_end,
-                   void                 *dst)
-{
-   float *d;
-   int idx;
-
-   d = (float *)dst;
-   if (!ed)
-     {
-        const char *s, *p;
-        long long mantisse;
-        long exponent;
-        int len;
-
-        s = (const char *)src;
-        p = s;
-        len = 0;
-        while ((p < (const char *)src_end) && (*p != 0)) {len++; p++; }
-
-        if (_eet_data_float_cache_get(s, len, d) != 0)
-          return len + 1;
-
-        if (eina_convert_atod(s, len, &mantisse, &exponent) == EINA_FALSE)
-          return -1;
-
-        *d = (float)ldexp((double)mantisse, exponent);
-
-        return len + 1;
-     }
-
-   if (eet_data_get_int(ed, src, src_end, &idx) < 0)
-     return -1;
-
-   if (!eet_dictionary_string_get_float(ed, idx, d))
-     return -1;
-
-   return 1;
-}
-
-static void *
-eet_data_put_float(Eet_Dictionary *ed,
-                   const void     *src,
-                   int            *size_ret)
-{
-   char buf[128];
-   int idx;
-
-   eina_convert_dtoa((double)(*(float *)src), buf);
-
-   if (!ed)
-     {
-        char *d;
-        int len;
-
-        len = strlen(buf);
-        d = malloc(len + 1);
-        if (!d)
-          return NULL;
-
-        memcpy(d, buf, len + 1);
-        *size_ret = len + 1;
-        return d;
-     }
-
-   idx = eet_dictionary_string_add(ed, buf);
-   if (idx == -1)
-     return NULL;
-
-   return eet_data_put_int(ed, &idx, size_ret);
-}
-
-/* DOUBLE TYPE */
-static int
-eet_data_get_double(const Eet_Dictionary *ed,
-                    const void           *src,
-                    const void           *src_end,
-                    void                 *dst)
-{
-   double *d;
-   int idx;
-
-   d = (double *)dst;
-
-   if (!ed)
-     {
-        const char *s, *p;
-        long long mantisse = 0;
-        long exponent = 0;
-        int len;
-
-        s = (const char *)src;
-        p = s;
-        len = 0;
-        while ((p < (const char *)src_end) && (*p != 0)) {len++; p++; }
-
-        if (_eet_data_double_cache_get(s, len, d) != 0)
-          return len + 1;
-
-        if (eina_convert_atod(s, len, &mantisse, &exponent) == EINA_FALSE)
-          return -1;
-
-        *d = ldexp((double)mantisse, exponent);
-
-        return len + 1;
-     }
-
-   if (eet_data_get_int(ed, src, src_end, &idx) < 0)
-     return -1;
-
-   if (!eet_dictionary_string_get_double(ed, idx, d))
-     return -1;
-
-   return 1;
-}
-
-static void *
-eet_data_put_double(Eet_Dictionary *ed,
-                    const void     *src,
-                    int            *size_ret)
-{
-   char buf[128];
-   int idx;
-
-   eina_convert_dtoa((double)(*(double *)src), buf);
-
-   if (!ed)
-     {
-        char *d;
-        int len;
-
-        len = strlen(buf);
-        d = malloc(len + 1);
-        if (!d)
-          return NULL;
-
-        memcpy(d, buf, len + 1);
-        *size_ret = len + 1;
-
-        return d;
-     }
-
-   idx = eet_dictionary_string_add(ed, buf);
-   if (idx == -1)
-     return NULL;
-
-   return eet_data_put_int(ed, &idx, size_ret);
-}
-
-static int
-eet_data_get_f32p32(const Eet_Dictionary *ed,
-                    const void           *src,
-                    const void           *src_end,
-                    void                 *dst)
-{
-   Eina_F32p32 *fp;
-   int idx;
-
-   fp = (Eina_F32p32 *)dst;
-
-   if (!ed)
-     {
-        const char *s, *p;
-        int len;
-
-        s = (const char *)src;
-        p = s;
-        len = 0;
-        while ((p < (const char *)src_end) && (*p != 0)) { len++; p++; }
-
-        if (!(eina_convert_atofp(s, len, fp)))
-          return -1;
-
-        return 1;
-     }
-
-   if (eet_data_get_int(ed, src, src_end, &idx) < 0)
-     return -1;
-
-   if (!eet_dictionary_string_get_fp(ed, idx, fp))
-     return -1;
-
-   return 1;
-}
-
-static void *
-eet_data_put_f32p32(Eet_Dictionary *ed,
-                    const void     *src,
-                    int            *size_ret)
-{
-   char buf[128];
-   int idx;
-
-   eina_convert_fptoa((Eina_F32p32)(*(Eina_F32p32 *)src), buf);
-
-   if (!ed)
-     {
-        char *d;
-        int len;
-
-        len = strlen(buf);
-        d = malloc(len + 1);
-        if (!d)
-          return NULL;
-
-        memcpy(d, buf, len + 1);
-        *size_ret = len + 1;
-
-        return d;
-     }
-
-   idx = eet_dictionary_string_add(ed, buf);
-   if (idx == -1)
-     return NULL;
-
-   return eet_data_put_int(ed, &idx, size_ret);
-}
-
-static int
-eet_data_get_f16p16(const Eet_Dictionary *ed,
-                    const void           *src,
-                    const void           *src_end,
-                    void                 *dst)
-{
-   Eina_F32p32 tmp;
-   Eina_F16p16 *fp;
-
-   fp = (Eina_F16p16 *)dst;
-
-   if (eet_data_get_f32p32(ed, src, src_end, &tmp) < 0)
-     return -1;
-
-   *fp = eina_f32p32_to_f16p16(tmp);
-   return 1;
-}
-
-static void *
-eet_data_put_f16p16(Eet_Dictionary *ed,
-                    const void     *src,
-                    int            *size_ret)
-{
-   Eina_F32p32 tmp;
-
-   tmp = eina_f16p16_to_f32p32((Eina_F16p16)(*(Eina_F16p16 *)src));
-   return eet_data_put_f32p32(ed, &tmp, size_ret);
-}
-
-static int
-eet_data_get_f8p24(const Eet_Dictionary *ed,
-                   const void           *src,
-                   const void           *src_end,
-                   void                 *dst)
-{
-   Eina_F32p32 tmp;
-   Eina_F8p24 *fp;
-
-   fp = (Eina_F8p24 *)dst;
-
-   if (eet_data_get_f32p32(ed, src, src_end, &tmp) < 0)
-     return -1;
-
-   *fp = eina_f32p32_to_f8p24(tmp);
-   return 1;
-}
-
-static void *
-eet_data_put_f8p24(Eet_Dictionary *ed,
-                   const void     *src,
-                   int            *size_ret)
-{
-   Eina_F32p32 tmp;
-
-   tmp = eina_f8p24_to_f32p32((Eina_F8p24)(*(Eina_F8p24 *)src));
-   return eet_data_put_f32p32(ed, &tmp, size_ret);
-}
-
-static inline int
-eet_data_get_type(const Eet_Dictionary *ed,
-                  int                   type,
-                  const void           *src,
-                  const void           *src_end,
-                  void                 *dest)
-{
-   int ret;
-
-   ret = eet_basic_codec[type - 1].get(ed, src, src_end, dest);
-   return ret;
-}
-
-static inline void *
-eet_data_put_type(Eet_Dictionary *ed,
-                  int             type,
-                  const void     *src,
-                  int            *size_ret)
-{
-   void *ret;
-
-   ret = eet_basic_codec[type - 1].put(ed, src, size_ret);
-   return ret;
-}
-
-static inline Eina_Bool
-eet_data_type_match(int type1,
-                    int type2)
-{
-   if (type1 == type2)
-     return EINA_TRUE;
-
-   /* Note: All floating point type are equivalent and could be read
-      without problem by any other floating point getter. */
-   switch (type1)
-     {
-      case EET_T_FLOAT:
-      case EET_T_DOUBLE:
-      case EET_T_F32P32:
-      case EET_T_F16P16:
-      case EET_T_F8P24:
-        switch (type2)
-          {
-           case EET_T_FLOAT:
-           case EET_T_DOUBLE:
-           case EET_T_F32P32:
-           case EET_T_F16P16:
-           case EET_T_F8P24:
-             return EINA_TRUE;
-
-           default:
-             break;
-          }  /* switch */
-        break;
-
-      default:
-        break;
-     }
-
-   return EINA_FALSE;
-}
-
-/* chunk format...
- *
- * char[4] = "CHnK"; // untyped data ... or
- * char[4] = "CHKx"; // typed data - x == type
- *
- * int     = chunk size (including magic string);
- * char[]  = chunk magic/name string (0 byte terminated);
- * ... sub-chunks (a chunk can contain chuncks recusrively) ...
- * or
- * ... payload data ...
- *
- */
-
-static inline void
-eet_data_chunk_get(const Eet_Dictionary *ed,
-                   Eet_Data_Chunk       *chnk,
-                   const void           *src,
-                   int                   size)
-{
-   const char *s;
-   int ret1, ret2;
-
-   if (!src)
-     return;
-
-   if (size <= 8)
-     return;
-
-   if (!chnk)
-     return;
-
-   s = src;
-   if (s[2] == 'K')
-     {
-        if ((s[0] != 'C') || (s[1] != 'H') || (s[2] != 'K'))
-          return;
-
-        chnk->type = (unsigned char)(s[3]);
-        if (chnk->type >= EET_I_LIMIT)
-          {
-             chnk->group_type =
-               ((chnk->type - EET_I_LIMIT) & 0xF) + EET_G_UNKNOWN;
-             switch ((chnk->type - EET_I_LIMIT) & 0xF0)
-               {
-#define EET_UNMATCH_TYPE(Type) \
-case EET_I_ ## Type: chnk->type = EET_T_ ## Type; break;
-
-                  EET_UNMATCH_TYPE(STRING);
-                  EET_UNMATCH_TYPE(INLINED_STRING);
-                  EET_UNMATCH_TYPE(NULL);
-
-                default:
-                  return;
-               }
-          }
-        else if (chnk->type > EET_T_LAST)
-          {
-             chnk->group_type = chnk->type;
-             chnk->type = EET_T_UNKNOW;
-          }
-        else
-          chnk->group_type = EET_G_UNKNOWN;
-        if ((chnk->type >= EET_T_LAST) ||
-            (chnk->group_type >=
-             EET_G_LAST))
-          {
-             chnk->type = 0;
-             chnk->group_type = 0;
-          }
-     }
-   else if ((s[0] != 'C') || (s[1] != 'H') || (s[2] != 'n') || (s[3] != 'K'))
-     return;
-
-   ret1 = eet_data_get_type(ed, EET_T_INT, (s + 4), (s + size), &(chnk->size));
-
-   if (ret1 <= 0)
-     return;
-
-   if ((chnk->size < 0) || ((chnk->size + 8) > size))
-     return;
-
-   ret2 = eet_data_get_type(ed, EET_T_STRING, (s + 8), (s + size), &(chnk->name));
-
-   if (ret2 <= 0)
-     return;
-
-   chnk->len = ret2;
-
-   /* Precalc hash */
-   chnk->hash = eet_data_get_string_hash(ed, (s + 8), (s + size));
-
-   if (ed)
-     {
-        chnk->data = (char *)src + 4 + ret1 + sizeof(int);
-        chnk->size -= sizeof(int);
-     }
-   else
-     {
-        chnk->data = (char *)src + 4 + ret1 + chnk->len;
-        chnk->size -= chnk->len;
-     }
-
-   return;
-}
-
-static inline Eet_Data_Chunk *
-eet_data_chunk_new(void       *data,
-                   int         size,
-                   const char *name,
-                   int         type,
-                   int         group_type)
-{
-   Eet_Data_Chunk *chnk;
-
-   if (!name)
-     return NULL;
-
-   chnk = calloc(1, sizeof(Eet_Data_Chunk));
-   if (!chnk)
-     return NULL;
-
-   /* Note: Another security, so older eet library could read file
-      saved with fixed point value. */
-   if (type == EET_T_F32P32
-       || type == EET_T_F16P16
-       || type == EET_T_F8P24)
-     type = EET_T_DOUBLE;
-
-   chnk->name = strdup(name);
-   chnk->len = strlen(name) + 1;
-   chnk->size = size;
-   chnk->data = data;
-   chnk->type = type;
-   chnk->group_type = group_type;
-   return chnk;
-}
-
-static inline void
-eet_data_chunk_free(Eet_Data_Chunk *chnk)
-{
-   if (chnk->name)
-     free(chnk->name);
-
-   free(chnk);
-}
-
-static inline Eet_Data_Stream *
-eet_data_stream_new(void)
-{
-   Eet_Data_Stream *ds;
-
-   ds = calloc(1, sizeof(Eet_Data_Stream));
-   if (!ds)
-     return NULL;
-
-   return ds;
-}
-
-static inline void
-eet_data_stream_free(Eet_Data_Stream *ds)
-{
-   if (ds->data)
-     free(ds->data);
-
-   free(ds);
-}
-
-static inline void
-eet_data_stream_flush(Eet_Data_Stream *ds)
-{
-   free(ds);
-}
-
-static inline void
-eet_data_stream_write(Eet_Data_Stream *ds,
-                      const void      *data,
-                      int              size)
-{
-   char *p;
-
-   if ((ds->pos + size) > ds->size)
-     {
-        ds->data = realloc(ds->data, ds->size + size + 512);
-        if (!ds->data)
-          {
-             ds->pos = 0;
-             ds->size = 0;
-             return;
-          }
-
-        ds->size = ds->size + size + 512;
-     }
-
-   p = ds->data;
-   memcpy(p + ds->pos, data, size);
-   ds->pos += size;
-}
-
-static void
-eet_data_chunk_put(Eet_Dictionary  *ed,
-                   Eet_Data_Chunk  *chnk,
-                   Eet_Data_Stream *ds)
-{
-   int *size;
-   void *string;
-   int s;
-   int size_ret = 0;
-   int string_ret = 0;
-   unsigned char buf[4] = "CHK";
-
-   /* disable this check - it will allow empty chunks to be written. this is
-    * right for corner-cases when y have a struct with empty fields (empty
-    * strings or empty list ptrs etc.) */
-   /* if (!chnk->data && chnk->type != EET_T_NULL) return; */
-   /* chunk head */
-
-/*   eet_data_stream_write(ds, "CHnK", 4);*/
-   if (chnk->type != EET_T_UNKNOW)
-     {
-        if (chnk->group_type != EET_G_UNKNOWN)
-          {
-             int type = EET_I_LIMIT + chnk->group_type - EET_G_UNKNOWN;
-
-             switch (chnk->type)
-               {
-     /* Only make sense with pointer type. */
-#define EET_MATCH_TYPE(Type) \
-case EET_T_ ## Type: type += EET_I_ ## Type; break;
-
-                   EET_MATCH_TYPE(STRING);
-                   EET_MATCH_TYPE(INLINED_STRING);
-                   EET_MATCH_TYPE(NULL);
-
-                 default:
-                   return;
-               }
-
-             buf[3] = type;
-          }
-        else
-          buf[3] = chnk->type;
-     }
-   else
-     buf[3] = chnk->group_type;
-
-   string = eet_data_put_string(ed, &chnk->name, &string_ret);
-   if (!string)
-     return;
-
-   /* size of chunk payload data + name */
-   s = chnk->size + string_ret;
-   size = eet_data_put_int(ed, &s, &size_ret);
-
-   /* FIXME: If something goes wrong the resulting file will be corrupted. */
-   if (!size)
-     goto on_error;
-
-   eet_data_stream_write(ds, buf, 4);
-
-   /* write chunk length */
-   eet_data_stream_write(ds, size, size_ret);
-
-   /* write chunk name */
-   eet_data_stream_write(ds, string, string_ret);
-
-   /* write payload */
-   if (chnk->data)
-     eet_data_stream_write(ds, chnk->data, chnk->size);
-
-   free(string);
-on_error:
-   free(size);
-}
-
-/*---*/
-
-static void
-_eet_descriptor_hash_new(Eet_Data_Descriptor *edd)
-{
-   int i;
-
-   edd->elements.hash.size = 1 << 6;
-   edd->elements.hash.buckets = calloc(
-       1,
-       sizeof(Eet_Data_Descriptor_Hash) *
-       edd->elements.hash.size);
-   for (i = 0; i < edd->elements.num; i++)
-     {
-        Eet_Data_Element *ede;
-        int hash;
-
-        ede = &(edd->elements.set[i]);
-        hash = _eet_hash_gen((char *)ede->name, 6);
-        if (!edd->elements.hash.buckets[hash].element)
-          edd->elements.hash.buckets[hash].element = ede;
-        else
-          {
-             Eet_Data_Descriptor_Hash *bucket;
-
-             bucket = calloc(1, sizeof(Eet_Data_Descriptor_Hash));
-             bucket->element = ede;
-             bucket->next = edd->elements.hash.buckets[hash].next;
-             edd->elements.hash.buckets[hash].next = bucket;
-          }
-     }
-}
-
-static void
-_eet_descriptor_hash_free(Eet_Data_Descriptor *edd)
-{
-   int i;
-
-   for (i = 0; i < edd->elements.hash.size; i++)
-     {
-        Eet_Data_Descriptor_Hash *bucket, *pbucket;
-
-        bucket = edd->elements.hash.buckets[i].next;
-        while (bucket)
-          {
-             pbucket = bucket;
-             bucket = bucket->next;
-             free(pbucket);
-          }
-     }
-   if (edd->elements.hash.buckets)
-     free(edd->elements.hash.buckets);
-}
-
-static Eet_Data_Element *
-_eet_descriptor_hash_find(Eet_Data_Descriptor *edd,
-                          char                *name,
-                          int                  hash)
-{
-   Eet_Data_Descriptor_Hash *bucket;
-
-   if (hash < 0)
-     hash = _eet_hash_gen(name, 6);
-   else
-     hash &= 0x3f;
-
-   if (!edd->elements.hash.buckets[hash].element)
-     return NULL;  /*
-                      When we use the dictionary as a source for chunk name, we will always
-                      have the same pointer in name. It's a good idea to just compare pointer
-                      instead of running strcmp on both string.
-                    */
-
-   if (edd->elements.hash.buckets[hash].element->directory_name_ptr == name)
-     return edd->elements.hash.buckets[hash].element;
-
-   if (!strcmp(edd->elements.hash.buckets[hash].element->name, name))
-     {
-        edd->elements.hash.buckets[hash].element->directory_name_ptr = name;
-        return edd->elements.hash.buckets[hash].element;
-     }
-
-   bucket = edd->elements.hash.buckets[hash].next;
-   while (bucket)
-     {
-        if (bucket->element->directory_name_ptr == name)
-          return bucket->element;
-
-        if (!strcmp(bucket->element->name, name))
-          {
-             bucket->element->directory_name_ptr = name;
-             return bucket->element;
-          }
-
-        bucket = bucket->next;
-     }
-   return NULL;
-}
-
-static void *
-_eet_mem_alloc(size_t size)
-{
-   return calloc(1, size);
-}
-
-static void
-_eet_mem_free(void *mem)
-{
-   free(mem);
-}
-
-static char *
-_eet_str_alloc(const char *str)
-{
-   return strdup(str);
-}
-
-static void
-_eet_str_free(const char *str)
-{
-   free((char *)str);
-}
-
-static Eina_Hash *
-_eet_eina_hash_add_alloc(Eina_Hash  *hash,
-                         const char *key,
-                         void       *data)
-{
-   if (!hash)
-     hash = eina_hash_string_small_new(NULL);
-
-   if (!hash)
-     return NULL;
-
-   eina_hash_add(hash, key, data);
-   return hash;
-}
-
-static Eina_Hash *
-_eet_eina_hash_direct_add_alloc(Eina_Hash  *hash,
-                                const char *key,
-                                void       *data)
-{
-   if (!hash)
-     hash = eina_hash_string_small_new(NULL);
-
-   if (!hash)
-     return NULL;
-
-   eina_hash_direct_add(hash, key, data);
-   return hash;
-}
-
-static char *
-_eet_str_direct_alloc(const char *str)
-{
-   return (char *)str;
-}
-
-static void
-_eet_str_direct_free(const char *str __UNUSED__)
-{
-}
-
-static void
-_eet_eina_hash_foreach(void             *hash,
-                       Eina_Hash_Foreach cb,
-                       void             *fdata)
-{
-   if (hash)
-     eina_hash_foreach(hash, cb, fdata);
-}
-
-static void
-_eet_eina_hash_free(void *hash)
-{
-   if (hash)
-     eina_hash_free(hash);
-}
-
-/*---*/
-EAPI Eina_Bool
-eet_eina_stream_data_descriptor_class_set(Eet_Data_Descriptor_Class *eddc,
-     /* When we change the structure content in the future, we need to handle old structure type too */
-                                          unsigned int               eddc_size,
-                                          const char                *name,
-                                          int                        size)
-{
-   if (!eddc || !name || eddc_size != sizeof (Eet_Data_Descriptor_Class))
-     return EINA_FALSE;
-
-   eddc->name = name;
-   eddc->size = size;
-   eddc->version = EET_DATA_DESCRIPTOR_CLASS_VERSION;
-
-   eddc->func.mem_alloc = _eet_mem_alloc;
-   eddc->func.mem_free = _eet_mem_free;
-   eddc->func.str_alloc = (char *(*)(const char *))eina_stringshare_add;
-   eddc->func.str_free = eina_stringshare_del;
-   eddc->func.list_next = (void *(*)(void *))eina_list_next;
-   eddc->func.list_append = (void *(*)(void *, void *))eina_list_append;
-   eddc->func.list_data = (void *(*)(void *))eina_list_data_get;
-   eddc->func.list_free = (void *(*)(void *))eina_list_free;
-   eddc->func.hash_foreach = (void (*)(void *, int (*)(void *, const char *, void *, void *), void *))_eet_eina_hash_foreach;
-   eddc->func.hash_add = (void *(*)(void *, const char *, void *))_eet_eina_hash_add_alloc;
-   eddc->func.hash_free = (void (*)(void *))_eet_eina_hash_free;
-
-   /* This will cause an ABI incompatibility */
-   eddc->func.array_alloc = _eet_mem_alloc;
-   eddc->func.array_free = _eet_mem_free;
-
-   return EINA_TRUE;
-}
-
-EAPI Eina_Bool
-eet_eina_file_data_descriptor_class_set(Eet_Data_Descriptor_Class *eddc,
-     /* When we change the structure content in the future, we need to handle old structure type too */
-                                        unsigned int               eddc_size,
-                                        const char                *name,
-                                        int                        size)
-{
-   if (!eet_eina_stream_data_descriptor_class_set(eddc, eddc_size, name, size))
-     return EINA_FALSE;
-
-   eddc->version = EET_DATA_DESCRIPTOR_CLASS_VERSION;
-
-   eddc->func.hash_add = (void *(*)(void *, const char *, void *))_eet_eina_hash_direct_add_alloc;
-   eddc->func.str_direct_alloc = _eet_str_direct_alloc;
-   eddc->func.str_direct_free = _eet_str_direct_free;
-
-   return EINA_TRUE;
-}
-
-static Eet_Data_Descriptor *
-_eet_data_descriptor_new(const Eet_Data_Descriptor_Class *eddc,
-                         int                              version)
-{
-   Eet_Data_Descriptor *edd;
-
-   if (!eddc)
-     return NULL;
-
-   edd = calloc(1, sizeof (Eet_Data_Descriptor));
-   if (!edd)
-     return NULL;
-
-   edd->name = eddc->name;
-   edd->ed = NULL;
-   edd->size = eddc->size;
-   edd->func.mem_alloc = _eet_mem_alloc;
-   edd->func.mem_free = _eet_mem_free;
-   edd->func.str_alloc = _eet_str_alloc;
-   edd->func.str_free = _eet_str_free;
-   if (eddc->func.mem_alloc)
-     edd->func.mem_alloc = eddc->func.mem_alloc;
-
-   if (eddc->func.mem_free)
-     edd->func.mem_free = eddc->func.mem_free;
-
-   if (eddc->func.str_alloc)
-     edd->func.str_alloc = eddc->func.str_alloc;
-
-   if (eddc->func.str_free)
-     edd->func.str_free = eddc->func.str_free;
-
-   edd->func.list_next = eddc->func.list_next;
-   edd->func.list_append = eddc->func.list_append;
-   edd->func.list_data = eddc->func.list_data;
-   edd->func.list_free = eddc->func.list_free;
-   edd->func.hash_foreach = eddc->func.hash_foreach;
-   edd->func.hash_add = eddc->func.hash_add;
-   edd->func.hash_free = eddc->func.hash_free;
-
-   if (eddc->version > 1 && version > 1)
-     {
-        edd->func.str_direct_alloc = eddc->func.str_direct_alloc;
-        edd->func.str_direct_free = eddc->func.str_direct_free;
-     }
-
-   if (eddc->version > 2)
-     {
-        edd->func.type_get = eddc->func.type_get;
-        edd->func.type_set = eddc->func.type_set;
-     }
-
-   if (eddc->version > 3)
-     {
-        edd->func.array_alloc = eddc->func.array_alloc;
-        edd->func.array_free = eddc->func.array_free;
-     }
-
-   return edd;
-}
-
-EAPI Eet_Data_Descriptor *
-eet_data_descriptor_new(const char                          *name,
-                        int                                  size,
-                        Eet_Descriptor_List_Next_Callback    func_list_next,
-                        Eet_Descriptor_List_Append_Callback  func_list_append,
-                        Eet_Descriptor_List_Data_Callback    func_list_data,
-                        Eet_Descriptor_List_Free_Callback    func_list_free,
-                        Eet_Descriptor_Hash_Foreach_Callback func_hash_foreach,
-                        Eet_Descriptor_Hash_Add_Callback     func_hash_add,
-                        Eet_Descriptor_Hash_Free_Callback    func_hash_free)
-{
-   Eet_Data_Descriptor_Class eddc;
-
-   if (!name)
-     return NULL;
-
-   memset(&eddc, 0, sizeof (Eet_Data_Descriptor_Class));
-
-   eddc.name = name;
-   eddc.size = size;
-   eddc.version = 0;
-
-   eddc.func.list_next = func_list_next;
-   eddc.func.list_append = func_list_append;
-   eddc.func.list_data = func_list_data;
-   eddc.func.list_free = func_list_free;
-   eddc.func.hash_foreach = func_hash_foreach;
-   eddc.func.hash_add = func_hash_add;
-   eddc.func.hash_free = func_hash_free;
-
-   return _eet_data_descriptor_new(&eddc, 0);
-}
-
-EAPI Eet_Data_Descriptor *
-eet_data_descriptor2_new(const Eet_Data_Descriptor_Class *eddc)
-{
-   return _eet_data_descriptor_new(eddc, 1);
-}
-
-EAPI Eet_Data_Descriptor *
-eet_data_descriptor3_new(const Eet_Data_Descriptor_Class *eddc)
-{
-   return _eet_data_descriptor_new(eddc, 2);
-}
-
-EAPI Eet_Data_Descriptor *
-eet_data_descriptor_stream_new(const Eet_Data_Descriptor_Class *eddc)
-{
-   return _eet_data_descriptor_new(eddc, 1);
-}
-
-EAPI Eet_Data_Descriptor *
-eet_data_descriptor_file_new(const Eet_Data_Descriptor_Class *eddc)
-{
-   return _eet_data_descriptor_new(eddc, 2);
-}
-
-EAPI void
-eet_data_descriptor_free(Eet_Data_Descriptor *edd)
-{
-   if (!edd)
-     return;
-
-   _eet_descriptor_hash_free(edd);
-   if (edd->elements.set)
-     free(edd->elements.set);
-
-   free(edd);
-}
-
-EAPI void
-eet_data_descriptor_element_add(Eet_Data_Descriptor *edd,
-                                const char          *name,
-                                int                  type,
-                                int                  group_type,
-                                int                  offset,
-                                int                  count,
-/*        int counter_offset, */
-                                const char          *counter_name /* FIXME: Useless should go on a major release */,
-                                Eet_Data_Descriptor *subtype)
-{
-   Eet_Data_Element *ede;
-   Eet_Data_Element *tmp;
-
-   /* UNION, VARIANT type would not work with simple type, we need a way to map the type. */
-   if ((group_type == EET_G_UNION
-        || group_type == EET_G_VARIANT)
-       &&
-       (type != EET_T_UNKNOW
-        || !subtype
-        || !subtype->func.type_get
-        || !subtype->func.type_set))
-     return;
-
-   /* VARIANT type will only work if the map only contains EET_G_*, but not UNION, VARIANT and ARRAY. */
-   if (group_type == EET_G_VARIANT)
-     {
-        int i;
-
-        for (i = 0; i < subtype->elements.num; ++i)
-          if (subtype->elements.set[i].type != EET_T_UNKNOW
-              && subtype->elements.set[i].group_type > EET_G_VAR_ARRAY
-              && subtype->elements.set[i].group_type < EET_G_UNION)
-            return;
-
-        subtype->unified_type = EINA_TRUE;
-     }
-
-   if (subtype
-       && subtype->unified_type
-       && (type != EET_T_UNKNOW
-           || group_type < EET_G_UNION))
-     return;
-
-   /* Sanity check done, let allocate ! */
-   edd->elements.num++;
-   tmp = realloc(edd->elements.set, edd->elements.num * sizeof(Eet_Data_Element));
-   if (!tmp)
-     return;
-
-   edd->elements.set = tmp;
-   ede = &(edd->elements.set[edd->elements.num - 1]);
-   ede->name = name;
-   ede->directory_name_ptr = NULL;
-
-   /*
-    * We do a special case when we do list,hash or whatever group of simple type.
-    * Instead of handling it in encode/decode/dump/undump, we create an
-    * implicit structure with only the simple type.
-    */
-   if ((group_type > EET_G_UNKNOWN)
-       && (group_type < EET_G_LAST)
-       && (((type > EET_T_UNKNOW) && (type < EET_T_STRING))
-           || ((type > EET_T_NULL) && (type < EET_T_LAST)))
-       && (!subtype))
-     {
-        subtype = calloc(1, sizeof (Eet_Data_Descriptor));
-        if (!subtype)
-          return;
-
-        subtype->name = "implicit";
-        subtype->size = eet_basic_codec[type - 1].size;
-        memcpy(&subtype->func, &edd->func, sizeof(subtype->func));
-
-        eet_data_descriptor_element_add(subtype,
-                                        eet_basic_codec[type - 1].name,
-                                        type,
-                                        EET_G_UNKNOWN,
-                                        0,
-                                        0,
-                                        /* 0,  */ NULL,
-                                        NULL);
-        type = EET_T_UNKNOW;
-     }
-
-   ede->type = type;
-   ede->group_type = group_type;
-   ede->offset = offset;
-   ede->count = count;
-   /* FIXME: For the time being, VAR_ARRAY, UNION and VARIANT  will put the counter_offset in count. */
-   ede->counter_offset = count;
-/*    ede->counter_offset = counter_offset; */
-   ede->counter_name = counter_name;
-
-   ede->subtype = subtype;
-}
-
-EAPI void *
-eet_data_read_cipher(Eet_File            *ef,
-                     Eet_Data_Descriptor *edd,
-                     const char          *name,
-                     const char          *cipher_key)
-{
-   const Eet_Dictionary *ed = NULL;
-   const void *data = NULL;
-   void *data_dec;
-   Eet_Free_Context context;
-   int required_free = 0;
-   int size;
-
-   ed = eet_dictionary_get(ef);
-
-   if (!cipher_key)
-     data = eet_read_direct(ef, name, &size);
-
-   if (!data)
-     {
-        required_free = 1;
-        data = eet_read_cipher(ef, name, &size, cipher_key);
-        if (!data)
-          return NULL;
-     }
-
-   eet_free_context_init(&context);
-   data_dec = _eet_data_descriptor_decode(&context, ed, edd, data, size, NULL, 0);
-   eet_free_context_shutdown(&context);
-
-   if (required_free)
-     free((void *)data);
-
-   return data_dec;
-}
-
-EAPI Eet_Node *
-eet_data_node_read_cipher(Eet_File   *ef,
-                          const char *name,
-                          const char *cipher_key)
-{
-   const Eet_Dictionary *ed = NULL;
-   const void *data = NULL;
-   Eet_Node *result;
-   Eet_Free_Context context;
-   int required_free = 0;
-   int size;
-
-   ed = eet_dictionary_get(ef);
-
-   if (!cipher_key)
-     data = eet_read_direct(ef, name, &size);
-
-   if (!data)
-     {
-        required_free = 1;
-        data = eet_read_cipher(ef, name, &size, cipher_key);
-        if (!data)
-          return NULL;
-     }
-
-   eet_free_context_init(&context);
-   result = _eet_data_descriptor_decode(&context, ed, NULL, data, size, NULL, 0);
-   eet_free_context_shutdown(&context);
-
-   if (required_free)
-     free((void *)data);
-
-   return result;
-}
-
-EAPI void *
-eet_data_read(Eet_File            *ef,
-              Eet_Data_Descriptor *edd,
-              const char          *name)
-{
-   return eet_data_read_cipher(ef, edd, name, NULL);
-}
-
-EAPI int
-eet_data_write_cipher(Eet_File            *ef,
-                      Eet_Data_Descriptor *edd,
-                      const char          *name,
-                      const char          *cipher_key,
-                      const void          *data,
-                      int                  compress)
-{
-   Eet_Dictionary *ed;
-   void *data_enc;
-   int size;
-   int val;
-
-   ed = eet_dictionary_get(ef);
-
-   data_enc = _eet_data_descriptor_encode(ed, edd, data, &size);
-   if (!data_enc)
-     return 0;
-
-   val = eet_write_cipher(ef, name, data_enc, size, compress, cipher_key);
-   free(data_enc);
-   return val;
-}
-
-EAPI int
-eet_data_write(Eet_File            *ef,
-               Eet_Data_Descriptor *edd,
-               const char          *name,
-               const void          *data,
-               int                  compress)
-{
-   return eet_data_write_cipher(ef, edd, name, NULL, data, compress);
-}
-
-static void
-eet_free_context_init(Eet_Free_Context *context)
-{
-   unsigned int i = 0;
-
-   memset(context, 0, sizeof (Eet_Free_Context));
-   for (i = 0; i < EET_FREE_COUNT; ++i)
-     {
-        eina_array_step_set(&context->freelist.list[i],
-                            sizeof (context->freelist.list[i]),
-                            32);
-        eina_array_step_set(&context->freelist_array.list[i],
-                            sizeof (context->freelist.list[i]),
-                            32);
-        eina_array_step_set(&context->freelist_list.list[i],
-                            sizeof (context->freelist.list[i]),
-                            32);
-        eina_array_step_set(&context->freelist_hash.list[i],
-                            sizeof (context->freelist.list[i]),
-                            32);
-        eina_array_step_set(&context->freelist_str.list[i],
-                            sizeof (context->freelist.list[i]),
-                            32);
-        eina_array_step_set(&context->freelist_direct_str.list[i],
-                            sizeof (context->freelist.list[i]),
-                            32);
-     }
-}
-
-static void
-eet_free_context_shutdown(Eet_Free_Context *context)
-{
-   unsigned int i = 0;
-
-   for (i = 0; i < EET_FREE_COUNT; ++i)
-     {
-        eina_array_flush(&context->freelist.list[i]);
-        eina_array_flush(&context->freelist_array.list[i]);
-        eina_array_flush(&context->freelist_list.list[i]);
-        eina_array_flush(&context->freelist_hash.list[i]);
-        eina_array_flush(&context->freelist_str.list[i]);
-        eina_array_flush(&context->freelist_direct_str.list[i]);
-     }
-}
-
-static int
-_eet_free_hash(void *data)
-{
-#ifdef _WIN64
-   __int64 ptr = (UINT_PTR)data;
-#else /* ifdef _WIN64 */
-   unsigned long ptr = (unsigned long)(data);
-#endif /* ifdef _WIN64 */
-   int hash;
-
-   hash = ptr;
-   hash ^= ptr >> 8;
-   hash ^= ptr >> 16;
-   hash ^= ptr >> 24;
-
-#if defined (_WIN64) || ((!defined (_WIN32)) && (LONG_BIT != 32))
-   hash ^= ptr >> 32;
-   hash ^= ptr >> 40;
-   hash ^= ptr >> 48;
-   hash ^= ptr >> 56;
-#endif /* if defined (_WIN64) || ((!defined (_WIN32)) && (LONG_BIT != 32)) */
-
-   return hash & 0xFF;
-}
-
-static void
-_eet_free_add(Eet_Free *ef,
-              void     *data)
-{
-   void *track;
-   Eina_Array_Iterator it;
-   unsigned int i;
-   int hash;
-
-   hash = _eet_free_hash(data);
-
-   EINA_ARRAY_ITER_NEXT(&ef->list[hash], i, track, it)
-   if (track == data)
-     return;
-
-   eina_array_push(&ef->list[hash], data);
-}
-
-#if 0
-static void
-_eet_free_del(Eet_Free *ef,
-              void     *data)
-{
-   void *track;
-   Eina_Array_Iterator it;
-   unsigned int i;
-   int hash;
-
-   hash = _eet_free_hash(data);
-
-   EINA_ARRAY_ITER_NEXT(&ef->list[hash], i, track, it)
-   if (track == data)
-     {
-        eina_array_data_set(&ef->list[hash], i, NULL);
-        return;
-     }
-}
-
-#endif
-
-static void
-_eet_free_reset(Eet_Free *ef)
-{
-   unsigned int i;
-
-   if (ef->ref > 0)
-     return;
-
-   for (i = 0; i < EET_FREE_COUNT; ++i)
-     eina_array_clean(&ef->list[i]);
-}
-
-static void
-_eet_free_ref(Eet_Free *ef)
-{
-   ef->ref++;
-}
-
-static void
-_eet_free_unref(Eet_Free *ef)
-{
-   ef->ref--;
-}
-
-#define _eet_freelist_add(Ctx, Data) _eet_free_add(&Ctx->freelist, Data);
-#define _eet_freelist_del(Ctx, Data) _eet_free_del(&Ctx->freelist, Data);
-#define _eet_freelist_reset(Ctx)     _eet_free_reset(&Ctx->freelist);
-#define _eet_freelist_ref(Ctx)       _eet_free_ref(&Ctx->freelist);
-#define _eet_freelist_unref(Ctx)     _eet_free_unref(&Ctx->freelist);
-
-static void
-_eet_freelist_free(Eet_Free_Context    *context,
-                   Eet_Data_Descriptor *edd)
-{
-   void *track;
-   Eina_Array_Iterator it;
-   unsigned int j;
-   unsigned int i;
-
-   if (context->freelist.ref > 0)
-     return;
-
-   for (j = 0; j < EET_FREE_COUNT; ++j)
-     EINA_ARRAY_ITER_NEXT(&context->freelist.list[j], i, track, it)
-     if (track)
-       {
-          if (edd)
-            edd->func.mem_free(track);
-          else
-            free(track);
-       }
-   _eet_free_reset(&context->freelist);
-}
-
-#define _eet_freelist_array_add(Ctx, Data) _eet_free_add(&Ctx->freelist_array, Data);
-#define _eet_freelist_array_del(Ctx, Data) _eet_free_del(&Ctx->freelist_array, Data);
-#define _eet_freelist_array_reset(Ctx)     _eet_free_reset(&Ctx->freelist_array);
-#define _eet_freelist_array_ref(Ctx)       _eet_free_ref(&Ctx->freelist_array);
-#define _eet_freelist_array_unref(Ctx)     _eet_free_unref(&Ctx->freelist_array);
-
-static void
-_eet_freelist_array_free(Eet_Free_Context    *context,
-                         Eet_Data_Descriptor *edd)
-{
-   void *track;
-   Eina_Array_Iterator it;
-   unsigned int j;
-   unsigned int i;
-
-   if (context->freelist_array.ref > 0)
-     return;
-
-   for (j = 0; j < EET_FREE_COUNT; ++j)
-     EINA_ARRAY_ITER_NEXT(&context->freelist_array.list[j], i, track, it)
-     if (track)
-       {
-          if (edd)
-            {
-               if (edd->func.array_free)
-                 edd->func.array_free(track);
-               else
-                 edd->func.mem_free(track);
-            }
-          else
-            free(track);
-       }
-   _eet_free_reset(&context->freelist_array);
-}
-
-#define _eet_freelist_list_add(Ctx, Data) _eet_free_add(&Ctx->freelist_list, Data);
-#define _eet_freelist_list_del(Ctx, Data) _eet_free_del(&Ctx->freelist_list, Data);
-#define _eet_freelist_list_reset(Ctx)     _eet_free_reset(&Ctx->freelist_list);
-#define _eet_freelist_list_ref(Ctx)       _eet_free_ref(&Ctx->freelist_list);
-#define _eet_freelist_list_unref(Ctx)     _eet_free_unref(&Ctx->freelist_list);
-
-static void
-_eet_freelist_list_free(Eet_Free_Context    *context,
-                        Eet_Data_Descriptor *edd)
-{
-   void *track;
-   Eina_Array_Iterator it;
-   unsigned int j;
-   unsigned int i;
-
-   if (context->freelist_list.ref > 0)
-     return;
-
-   for (j = 0; j < EET_FREE_COUNT; ++j)
-     EINA_ARRAY_ITER_NEXT(&context->freelist_list.list[j], i, track, it)
-     if (track)
-       {
-          if (edd)
-            edd->func.list_free(*((void **)(track)));
-       }
-   _eet_free_reset(&context->freelist_list);
-}
-
-#define _eet_freelist_str_add(Ctx, Data) _eet_free_add(&Ctx->freelist_str, Data);
-#define _eet_freelist_str_del(Ctx, Data) _eet_free_del(&Ctx->freelist_str, Data);
-#define _eet_freelist_str_reset(Ctx)     _eet_free_reset(&Ctx->freelist_str);
-#define _eet_freelist_str_ref(Ctx)       _eet_free_ref(&Ctx->freelist_str);
-#define _eet_freelist_str_unref(Ctx)     _eet_free_unref(&Ctx->freelist_str);
-
-static void
-_eet_freelist_str_free(Eet_Free_Context    *context,
-                       Eet_Data_Descriptor *edd)
-{
-   void *track;
-   Eina_Array_Iterator it;
-   unsigned int j;
-   unsigned int i;
-
-   if (context->freelist_str.ref > 0)
-     return;
-
-   for (j = 0; j < EET_FREE_COUNT; ++j)
-     EINA_ARRAY_ITER_NEXT(&context->freelist_str.list[j], i, track, it)
-     if (track)
-       {
-          if (edd)
-            edd->func.str_free(track);
-          else
-            free(track);
-       }
-   _eet_free_reset(&context->freelist_str);
-}
-
-#define _eet_freelist_direct_str_add(Ctx, Data) _eet_free_add(&Ctx->freelist_direct_str, Data);
-#define _eet_freelist_direct_str_del(Ctx, Data) _eet_free_del(&Ctx->freelist_direct_str, Data);
-#define _eet_freelist_direct_str_reset(Ctx)     _eet_free_reset(&Ctx->freelist_direct_str);
-#define _eet_freelist_direct_str_ref(Ctx)       _eet_free_ref(&Ctx->freelist_direct_str);
-#define _eet_freelist_direct_str_unref(Ctx)     _eet_free_unref(&Ctx->freelist_direct_str);
-
-static void
-_eet_freelist_direct_str_free(Eet_Free_Context    *context,
-                              Eet_Data_Descriptor *edd)
-{
-   void *track;
-   Eina_Array_Iterator it;
-   unsigned int j;
-   unsigned int i;
-
-   if (context->freelist_direct_str.ref > 0)
-     return;
-
-   for (j = 0; j < EET_FREE_COUNT; ++j)
-     EINA_ARRAY_ITER_NEXT(&context->freelist_str.list[j], i, track, it)
-     if (track)
-       {
-          if (edd)
-            edd->func.str_direct_free(track);
-          else
-            free(track);
-       }
-   _eet_free_reset(&context->freelist_direct_str);
-}
-
-#define _eet_freelist_hash_add(Ctx, Data) _eet_free_add(&Ctx->freelist_hash, Data);
-#define _eet_freelist_hash_del(Ctx, Data) _eet_free_del(&Ctx->freelist_hash, Data);
-#define _eet_freelist_hash_reset(Ctx)     _eet_free_reset(&Ctx->freelist_hash);
-#define _eet_freelist_hash_ref(Ctx)       _eet_free_ref(&Ctx->freelist_hash);
-#define _eet_freelist_hash_unref(Ctx)     _eet_free_unref(&Ctx->freelist_hash);
-
-static void
-_eet_freelist_hash_free(Eet_Free_Context    *context,
-                        Eet_Data_Descriptor *edd)
-{
-   void *track;
-   Eina_Array_Iterator it;
-   unsigned int j;
-   unsigned int i;
-
-   if (context->freelist_hash.ref > 0)
-     return;
-
-   for (j = 0; j < EET_FREE_COUNT; ++j)
-     EINA_ARRAY_ITER_NEXT(&context->freelist_hash.list[j], i, track, it)
-     if (track)
-       {
-          if (edd)
-            edd->func.hash_free(track);
-          else
-            free(track);
-       }
-   _eet_free_reset(&context->freelist_hash);
-}
-
-static void
-_eet_freelist_all_ref(Eet_Free_Context *freelist_context)
-{
-   _eet_freelist_ref(freelist_context);
-   _eet_freelist_str_ref(freelist_context);
-   _eet_freelist_list_ref(freelist_context);
-   _eet_freelist_hash_ref(freelist_context);
-   _eet_freelist_direct_str_ref(freelist_context);
-}
-
-static void
-_eet_freelist_all_unref(Eet_Free_Context *freelist_context)
-{
-   _eet_freelist_unref(freelist_context);
-   _eet_freelist_str_unref(freelist_context);
-   _eet_freelist_list_unref(freelist_context);
-   _eet_freelist_hash_unref(freelist_context);
-   _eet_freelist_direct_str_unref(freelist_context);
-}
-
-static int
-eet_data_descriptor_encode_hash_cb(void       *hash __UNUSED__,
-                                   const char *cipher_key,
-                                   void       *hdata,
-                                   void       *fdata)
-{
-   Eet_Dictionary *ed;
-   Eet_Data_Encode_Hash_Info *edehi;
-   Eet_Data_Stream *ds;
-   Eet_Data_Element *ede;
-   Eet_Data_Chunk *echnk;
-   void *data = NULL;
-   int size;
-
-   edehi = fdata;
-   ede = edehi->ede;
-   ds = edehi->ds;
-   ed = edehi->ed;
-
-   /* Store key */
-   data = eet_data_put_type(ed,
-                            EET_T_STRING,
-                            &cipher_key,
-                            &size);
-   if (data)
-     {
-        echnk = eet_data_chunk_new(data,
-                                   size,
-                                   ede->name,
-                                   ede->type,
-                                   ede->group_type);
-        eet_data_chunk_put(ed, echnk, ds);
-        eet_data_chunk_free(echnk);
-        free(data);
-        data = NULL;
-     }
-
-   EET_ASSERT(!((ede->type > EET_T_UNKNOW) && (ede->type < EET_T_STRING)), return );
-
-   /* Store data */
-   if (ede->type >= EET_T_STRING)
-     eet_data_put_unknown(ed, NULL, ede, ds, &hdata);
-   else
-     {
-        if (ede->subtype)
-          data = _eet_data_descriptor_encode(ed,
-                                             ede->subtype,
-                                             hdata,
-                                             &size);
-
-        if (data)
-          {
-             echnk = eet_data_chunk_new(data,
-                                        size,
-                                        ede->name,
-                                        ede->type,
-                                        ede->group_type);
-             eet_data_chunk_put(ed, echnk, ds);
-             eet_data_chunk_free(echnk);
-             free(data);
-             data = NULL;
-          }
-     }
-
-   return 1;
-}
-
-static char *
-_eet_data_dump_token_get(const char *src,
-                         int        *len)
-{
-   const char *p;
-   char *tok = NULL;
-   int in_token = 0;
-   int in_quote = 0;
-   int tlen = 0, tsize = 0;
-
-#define TOK_ADD(x)                     \
-  do {                                 \
-       tlen++;                         \
-       if (tlen >= tsize)              \
-         {                             \
-            tsize += 32;               \
-            tok = realloc(tok, tsize); \
-         }                             \
-       tok[tlen - 1] = x;              \
-    } while (0)
-
-   for (p = src; *len > 0; p++, (*len)--)
-     {
-        if (in_token)
-          {
-             if (in_quote)
-               {
-                  if ((p[0] == '\"') && (p > src) && (p[-1] != '\\'))
-                    in_quote = 0;
-                  else if ((p[0] == '\\') && (*len > 1) &&
-                           (p[1] == '\"'))
-                    {
-/* skip */
-                    }
-                  else if ((p[0] == '\\') && (p > src) && (p[-1] == '\\'))
-                    {
-/* skip */
-                    }
-                  else if ((p[0] == '\\') && (*len > 1) && (p[1] == 'n'))
-                    {
-/* skip */
-                    }
-                  else if ((p[0] == 'n') && (p > src) && (p[-1] == '\\'))
-                    TOK_ADD('\n');
-                  else
-                    TOK_ADD(p[0]);
-               }
-             else
-               {
-                  if (p[0] == '\"')
-                    in_quote = 1;
-                  else
-                    {
-                       if ((isspace(p[0])) || (p[0] == ';')) /* token ends here */
-                         {
-                            TOK_ADD(0);
-                            (*len)--;
-                            return tok;
-                         }
-                       else
-                         TOK_ADD(p[0]);
-                    }
-               }
-          }
-        else if (!((isspace(p[0])) || (p[0] == ';')))
-          {
-             in_token = 1;
-             (*len)++;
-             p--;
-          }
-     }
-   if (in_token)
-     {
-        TOK_ADD(0);
-        return tok;
-     }
-
-   if (tok)
-     free(tok);
-
-   return NULL;
-}
-
-static void
-eet_data_encode(Eet_Dictionary  *ed,
-                Eet_Data_Stream *ds,
-                void            *data,
-                const char      *name,
-                int              size,
-                int              type,
-                int              group_type)
-{
-   Eet_Data_Chunk *echnk;
-
-   if (!data)
-     type = EET_T_NULL;
-
-   if (group_type != EET_G_UNKNOWN)
-     if (type >= EET_T_LAST)
-       type = EET_T_UNKNOW;
-
-   echnk = eet_data_chunk_new(data, size, name, type, group_type);
-   eet_data_chunk_put(ed, echnk, ds);
-   eet_data_chunk_free(echnk);
-   free(data);
-}
-
-static void *
-_eet_data_dump_encode(int             parent_type,
-                      Eet_Dictionary *ed,
-                      Eet_Node       *node,
-                      int            *size_ret)
-{
-   Eet_Data_Chunk *chnk = NULL;
-   Eet_Data_Stream *ds;
-   void *cdata, *data;
-   int csize, size;
-   int count;
-   int child_type;
-   Eet_Node *n;
-
-   if (_eet_data_words_bigendian == -1)
-     {
-        unsigned long int v;
-
-        v = htonl(0x12345678);
-        if (v == 0x12345678)
-          _eet_data_words_bigendian = 1;
-        else
-          _eet_data_words_bigendian = 0;
-     }
-
-   if (!node)
-     return NULL;
-
-   ds = eet_data_stream_new();
-   if (!ds)
-     return NULL;
-
-   switch (node->type)
-     {
-      case EET_G_UNKNOWN:
-        for (n = node->values; n; n = n->next)
-          {
-             data = _eet_data_dump_encode(node->type, ed, n, &size);
-             if (data)
-               {
-                  eet_data_stream_write(ds, data, size);
-                  free(data);
-               }
-          }
-        break;
-
-      case EET_G_ARRAY:
-      case EET_G_VAR_ARRAY:
-        for (child_type = EET_T_NULL, n = node->values; n; n = n->next)
-          {
-             if (n->type != EET_T_NULL)
-               {
-                  child_type = n->type;
-                  break;
-               }
-          }
-
-        data = eet_data_put_type(ed,
-                                 EET_T_INT,
-                                 &node->count,
-                                 &size);
-        eet_data_encode(ed,
-                        ds,
-                        data,
-                        node->name,
-                        size,
-                        child_type,
-                        node->type);
-
-        count = node->count;
-
-        for (n = node->values; n; n = n->next)
-          {
-             int pos = ds->pos;
-
-             switch (n->type)
-               {
-                case EET_T_STRING:
-                case EET_T_INLINED_STRING:
-                  data = eet_data_put_type(ed,
-                                           n->type,
-                                           &(n->data.value.str),
-                                           &size);
-                  if (data)
-                    eet_data_encode(ed,
-                                    ds,
-                                    data,
-                                    node->name,
-                                    size,
-                                    n->type,
-                                    node->type);
-
-                  break;
-
-                case EET_T_NULL:
-                  continue;
-
-                default:
-                  data = _eet_data_dump_encode(n->type, ed, n, &size);
-                  eet_data_encode(ed,
-                                  ds,
-                                  data,
-                                  node->name,
-                                  size,
-                                  n->type,
-                                  node->type);
-                  break;
-               }  /* switch */
-             if (ds->pos != pos)
-               count--;
-          }
-
-        for (; count; count--)
-          {
-             eet_data_encode(ed,
-                             ds,
-                             NULL,
-                             node->name,
-                             0,
-                             EET_T_NULL,
-                             node->type);
-          }
-
-        /* Array is somekind of special case, so we should embed it inside another chunk. */
-        *size_ret = ds->pos;
-        cdata = ds->data;
-
-        ds->data = NULL;
-        ds->size = 0;
-        eet_data_stream_free(ds);
-
-        return cdata;
-        break;
-
-      case EET_G_LIST:
-        for (n = node->values; n; n = n->next)
-          {
-             switch (n->type)
-               {
-                case EET_T_STRING:
-                case EET_T_INLINED_STRING:
-                  data = eet_data_put_type(ed,
-                                           n->type,
-                                           &(n->data.value.str),
-                                           &size);
-                  if (data)
-                    eet_data_encode(ed,
-                                    ds,
-                                    data,
-                                    node->name,
-                                    size,
-                                    n->type,
-                                    node->type);
-
-                  break;
-
-                case EET_T_NULL:
-                  continue;
-
-                default:
-                  data = _eet_data_dump_encode(node->type, ed, n, &size);
-                  eet_data_encode(ed,
-                                  ds,
-                                  data,
-                                  node->name,
-                                  size,
-                                  n->type,
-                                  node->type);
-               }  /* switch */
-          }
-
-        /* List is another somekind of special case, every chunk is embed inside a list chunk. */
-        *size_ret = ds->pos;
-        cdata = ds->data;
-
-        ds->data = NULL;
-        ds->size = 0;
-        eet_data_stream_free(ds);
-
-        return cdata;
-        break;
-
-      case EET_G_HASH:
-        if (node->key)
-          {
-             data = eet_data_put_type(ed,
-                                      EET_T_STRING,
-                                      &node->key,
-                                      &size);
-             eet_data_encode(ed,
-                             ds,
-                             data,
-                             node->name,
-                             size,
-                             node->type,
-                             node->type);
-          }
-        else
-          /* A Hash without key will not decode correctly. */
-          return NULL;
-
-        for (n = node->values; n; n = n->next)
-          {
-             switch (n->type)
-               {
-                case EET_T_STRING:
-                case EET_T_INLINED_STRING:
-                  data = eet_data_put_type(ed,
-                                           n->type,
-                                           &(n->data.value.str),
-                                           &size);
-                  if (data)
-                    eet_data_encode(ed,
-                                    ds,
-                                    data,
-                                    node->name,
-                                    size,
-                                    n->type,
-                                    node->type);
-
-                  break;
-
-                case EET_T_NULL:
-                  continue;
-
-                default:
-                  data = _eet_data_dump_encode(node->type, ed, n, &size);
-                  eet_data_encode(ed,
-                                  ds,
-                                  data,
-                                  node->name,
-                                  size,
-                                  n->type,
-                                  node->type);
-               }  /* switch */
-          }
-
-        /* Hash is somekind of special case, so we should embed it inside another chunk. */
-        *size_ret = ds->pos;
-        cdata = ds->data;
-
-        eet_data_stream_flush(ds);
-
-        return cdata;
-
-      case EET_T_NULL:
-        break;
-
-#define EET_DATA_NODE_ENCODE(Eet_Type, Type)                                 \
-case Eet_Type:                                                               \
-  data = eet_data_put_type(ed, node->type, &(node->data.value.Type), &size); \
-  if (data)                                                                  \
-    {                                                                        \
-       eet_data_encode(ed,                                                   \
-                       ds,                                                   \
-                       data,                                                 \
-                       node->name,                                           \
-                       size,                                                 \
-                       node->type,                                           \
-                       parent_type);                                         \
-       cdata = ds->data;                                                     \
-       *size_ret = ds->pos;                                                  \
-       eet_data_stream_flush(ds);                                            \
-       return cdata;                                                         \
-    }   /* switch */                                                         \
-  break;
-
-        EET_DATA_NODE_ENCODE(EET_T_CHAR, c);
-        EET_DATA_NODE_ENCODE(EET_T_SHORT, s);
-        EET_DATA_NODE_ENCODE(EET_T_INT, i);
-        EET_DATA_NODE_ENCODE(EET_T_LONG_LONG, l);
-        EET_DATA_NODE_ENCODE(EET_T_FLOAT, f);
-        EET_DATA_NODE_ENCODE(EET_T_DOUBLE, d);
-        EET_DATA_NODE_ENCODE(EET_T_UCHAR, uc);
-        EET_DATA_NODE_ENCODE(EET_T_USHORT, us);
-        EET_DATA_NODE_ENCODE(EET_T_UINT, ui);
-        EET_DATA_NODE_ENCODE(EET_T_ULONG_LONG, ul);
-        EET_DATA_NODE_ENCODE(EET_T_INLINED_STRING, str);
-        EET_DATA_NODE_ENCODE(EET_T_STRING, str);
-
-      default:
-        break;
-     }
-
-   if ((node->type >= EET_G_UNKNOWN) && (node->type < EET_G_LAST))
-     chnk = eet_data_chunk_new(ds->data,
-                               ds->pos,
-                               node->name,
-                               EET_T_UNKNOW,
-                               node->type);
-   else
-     chnk = eet_data_chunk_new(ds->data,
-                               ds->pos,
-                               node->name,
-                               node->type,
-                               EET_G_UNKNOWN);
-
-   eet_data_stream_flush(ds);
-
-   ds = eet_data_stream_new();
-   eet_data_chunk_put(ed, chnk, ds);
-   cdata = ds->data;
-   csize = ds->pos;
-
-   eet_data_stream_flush(ds);
-   *size_ret = csize;
-
-   free(chnk->data);
-   eet_data_chunk_free(chnk);
-
-   return cdata;
-}
-
-static void *
-_eet_data_dump_parse(Eet_Dictionary *ed,
-                     int            *size_ret,
-                     const char     *src,
-                     int             size)
-{
-   void *cdata = NULL;
-   const char *p = NULL;
-#define M_NONE   0
-#define M_STRUCT 1
-#define M_       2
-   int left, jump;
-   Eet_Node *node_base = NULL;
-   Eet_Node *node = NULL;
-   Eet_Node *n = NULL, *nn = NULL;
-
-   /* FIXME; handle parse errors */
-#define TOK_GET(t) \
-  jump = left; t = _eet_data_dump_token_get(p, &left); p += jump - left;
-   left = size;
-   for (p = src; p < (src + size); )
-     {
-        char *tok1, *tok2, *tok3, *tok4;
-
-        TOK_GET(tok1);
-        if (tok1)
-          {
-             if (!strcmp(tok1, "group"))
-               {
-                  TOK_GET(tok2);
-                  if (tok2)
-                    {
-                       TOK_GET(tok3);
-                       if (tok3)
-                         {
-                            TOK_GET(tok4);
-                            if (tok4)
-                              {
-                                 if (!strcmp(tok4, "{"))
-                                   {
-/* we have 'group NAM TYP {' */
-                                       n = eet_node_new();
-                                       if (n)
-                                         {
-                                            n->parent = node;
-                                            if (!node_base)
-                                              node_base = n;
-
-                                            if (node)
-                                              {
-/* append node */
-                                                  if (!node->values)
-                                                    node->values = n;
-                                                  else
-                                                    for (nn = node->values; nn;
-                                                         nn = nn->next)
-                                                      {
-                                                         if (!nn->next)
-                                                           {
-                                                              nn->next = n;
-                                                              break;
-                                                           }
-                                                      }
-                                              }
-
-                                            n->name = eina_stringshare_add(tok2);
-                                            if      (!strcmp(tok3, "struct"))
-                                              n->type = EET_G_UNKNOWN;
-                                            else if (!strcmp(tok3, "array"))
-                                              n->type = EET_G_ARRAY;
-                                            else if (!strcmp(tok3, "var_array"))
-                                              n->type = EET_G_VAR_ARRAY;
-                                            else if (!strcmp(tok3, "list"))
-                                              n->type = EET_G_LIST;
-                                            else if (!strcmp(tok3, "hash"))
-                                              n->type = EET_G_HASH;
-                                            else
-                                              ERR(
-                                                "ERROR: group type '%s' invalid.",
-                                                tok3);
-
-                                            node = n;
-                                         }
-                                   }
-
-                                 free(tok4);
-                              }
-
-                            free(tok3);
-                         }
-
-                       free(tok2);
-                    }
-               }
-             else if (!strcmp(tok1, "value"))
-               {
-                  TOK_GET(tok2);
-                  if (tok2)
-                    {
-                       TOK_GET(tok3);
-                       if (tok3)
-                         {
-                            TOK_GET(tok4);
-                            if (tok4)
-                              {
-/* we have 'value NAME TYP XXX' */
-                                  if (node_base)
-                                    {
-                                       n = eet_node_new();
-                                       if (n)
-                                         {
-                                            n->parent = node;
-/* append node */
-                                            if (!node->values)
-                                              node->values = n;
-                                            else
-                                              for (nn = node->values; nn;
-                                                   nn = nn->next)
-                                                {
-                                                   if (!nn->next)
-                                                     {
-                                                        nn->next = n;
-                                                        break;
-                                                     }
-                                                }
-
-                                            n->name = eina_stringshare_add(tok2);
-                                            if      (!strcmp(tok3, "char:"))
-                                              {
-                                                 n->type = EET_T_CHAR;
-                                                 sscanf(tok4, "%hhi",
-                                                        &(n->data.value.c));
-                                              }
-                                            else if (!strcmp(tok3, "short:"))
-                                              {
-                                                 n->type = EET_T_SHORT;
-                                                 sscanf(tok4, "%hi",
-                                                        &(n->data.value.s));
-                                              }
-                                            else if (!strcmp(tok3, "int:"))
-                                              {
-                                                 n->type = EET_T_INT;
-                                                 sscanf(tok4, "%i",
-                                                        &(n->data.value.i));
-                                              }
-                                            else if (!strcmp(tok3, "long_long:"))
-                                              {
-                                                 n->type = EET_T_LONG_LONG;
-                                                 sscanf(tok4, "%lli",
-                                                        &(n->data.value.l));
-                                              }
-                                            else if (!strcmp(tok3, "float:"))
-                                              {
-                                                 n->type = EET_T_FLOAT;
-                                                 sscanf(tok4, "%f",
-                                                        &(n->data.value.f));
-                                              }
-                                            else if (!strcmp(tok3, "double:"))
-                                              {
-                                                 n->type = EET_T_DOUBLE;
-                                                 sscanf(tok4, "%lf",
-                                                        &(n->data.value.d));
-                                              }
-                                            else if (!strcmp(tok3, "uchar:"))
-                                              {
-                                                 n->type = EET_T_UCHAR;
-                                                 sscanf(tok4, "%hhu",
-                                                        &(n->data.value.uc));
-                                              }
-                                            else if (!strcmp(tok3, "ushort:"))
-                                              {
-                                                 n->type = EET_T_USHORT;
-                                                 sscanf(tok4, "%hu",
-                                                        &(n->data.value.us));
-                                              }
-                                            else if (!strcmp(tok3, "uint:"))
-                                              {
-                                                 n->type = EET_T_UINT;
-                                                 sscanf(tok4, "%u",
-                                                        &(n->data.value.ui));
-                                              }
-                                            else if (!strcmp(tok3, "ulong_long:"))
-                                              {
-                                                 n->type = EET_T_ULONG_LONG;
-                                                 sscanf(tok4, "%llu",
-                                                        &(n->data.value.ul));
-                                              }
-                                            else if (!strcmp(tok3, "string:"))
-                                              {
-                                                 n->type = EET_T_STRING;
-                                                 n->data.value.str =
-                                                   eina_stringshare_add(tok4);
-                                              }
-                                            else if (!strcmp(tok3, "inlined:"))
-                                              {
-                                                 n->type = EET_T_INLINED_STRING;
-                                                 n->data.value.str =
-                                                   eina_stringshare_add(tok4);
-                                              }
-                                            else if (!strcmp(tok3, "null"))
-                                              {
-                                                 n->type = EET_T_NULL;
-                                                 n->data.value.str = NULL;
-                                              }
-                                            else
-                                              ERR(
-                                                "ERROR: value type '%s' invalid.",
-                                                tok4);
-                                         }
-                                    }
-
-                                  free(tok4);
-                              }
-
-                            free(tok3);
-                         }
-
-                       free(tok2);
-                    }
-               }
-             else if (!strcmp(tok1, "key"))
-               {
-                  TOK_GET(tok2);
-                  if (tok2)
-                    {
-/* we have 'key NAME' */
-                        if (node)
-                          node->key = eina_stringshare_add(tok2);
-
-                        free(tok2);
-                    }
-               }
-             else if (!strcmp(tok1, "count"))
-               {
-                  TOK_GET(tok2);
-                  if (tok2)
-                    {
-/* we have a 'count COUNT' */
-                        if (node)
-                          sscanf(tok2, "%i", &(node->count));
-
-                        free(tok2);
-                    }
-               }
-             else if (!strcmp(tok1, "}"))
-               /* we have an end of the group */
-               if (node)
-                 node = node->parent;
-
-             free(tok1);
-          }
-     }
-
-   if (node_base)
-     {
-        cdata = _eet_data_dump_encode(EET_G_UNKNOWN, ed, node_base, size_ret);
-        eet_node_del(node_base);
-     }
-
-   return cdata;
-}
-
-#define NEXT_CHUNK(P, Size, Echnk, Ed)                    \
-  {                                                       \
-     int __tmp;                                           \
-     __tmp = Ed ? (int)(sizeof(int) * 2) : Echnk.len + 4; \
-     P += (4 + Echnk.size + __tmp);                       \
-     Size -= (4 + Echnk.size + __tmp);                    \
-  }
-
-static void *
-_eet_data_descriptor_decode(Eet_Free_Context     *context,
-                            const Eet_Dictionary *ed,
-                            Eet_Data_Descriptor  *edd,
-                            const void           *data_in,
-                            int                   size_in,
-                            void                 *data_out,
-                            int                   size_out)
-{
-   Eet_Node *result = NULL;
-   void *data = NULL;
-   char *p;
-   int size, i;
-   Eet_Data_Chunk chnk;
-
-   if (_eet_data_words_bigendian == -1)
-     {
-        unsigned long int v;
-
-        v = htonl(0x12345678);
-        if (v == 0x12345678)
-          _eet_data_words_bigendian = 1;
-        else
-          _eet_data_words_bigendian = 0;
-     }
-
-   if (edd)
-     {
-        if (data_out)
-          {
-             if (size_out <= edd->size)
-               data = data_out;
-          }
-        else
-          {
-             data = edd->func.mem_alloc(edd->size);
-          }
-
-        if (!data)
-          return NULL;
-
-        if (edd->ed != ed)
-          {
-             for (i = 0; i < edd->elements.num; i++)
-               edd->elements.set[i].directory_name_ptr = NULL;
-             edd->ed = ed;
-          }
-     }
-
-   _eet_freelist_all_ref(context);
-   if (data && !data_out)
-     _eet_freelist_add(context, data);
-
-   memset(&chnk, 0, sizeof(Eet_Data_Chunk));
-   eet_data_chunk_get(ed, &chnk, data_in, size_in);
-   if (!chnk.name)
-     goto error;
-
-   if (edd)
-     if (strcmp(chnk.name, edd->name))
-       goto error;
-
-   p = chnk.data;
-   if (ed)
-     size = size_in - (4 + sizeof(int) * 2);
-   else
-     size = size_in - (4 + 4 + chnk.len);
-
-   if (edd)
-     {
-        if (!edd->elements.hash.buckets)
-          _eet_descriptor_hash_new(edd);
-     }
-   else
-     {
-        switch (chnk.group_type)
-          {
-           case EET_G_UNKNOWN:
-             switch (chnk.type)
-               {
-                case EET_T_STRING:
-                  return eet_node_string_new(chnk.name, chnk.data);
-
-                case EET_T_INLINED_STRING:
-                  return eet_node_inlined_string_new(chnk.name, chnk.data);
-
-                case EET_T_NULL:
-                  return eet_node_null_new(chnk.name);
-
-                default:
-                  result = eet_node_struct_new(chnk.name, NULL);
-               }  /* switch */
-             break;
-
-           case EET_G_VAR_ARRAY:
-             return eet_node_var_array_new(chnk.name, NULL);
-
-           case EET_G_LIST:
-           case EET_G_HASH:
-           case EET_G_ARRAY:
-           case EET_G_UNION:
-           case EET_G_VARIANT:
-           default:
-             goto error;
-          }
-     }
-
-   while (size > 0)
-     {
-        Eet_Data_Chunk echnk;
-        Eet_Data_Element *ede = NULL;
-        Eet_Node *child = NULL;
-        int group_type = EET_G_UNKNOWN, type = EET_T_UNKNOW;
-        int ret = 0;
-
-        /* get next data chunk */
-        memset(&echnk, 0, sizeof(Eet_Data_Chunk));
-        eet_data_chunk_get(ed, &echnk, p, size);
-        if (!echnk.name)
-          goto error;  /* FIXME: don't REPLY on edd - work without */
-
-        if (edd)
-          {
-             ede = _eet_descriptor_hash_find(edd, echnk.name, echnk.hash);
-             if (ede)
-               {
-                  group_type = ede->group_type;
-                  type = ede->type;
-                  if ((echnk.type == 0) && (echnk.group_type == 0))
-                    {
-                       type = ede->type;
-                       group_type = ede->group_type;
-                    }
-                  else
-                    {
-                       if (IS_SIMPLE_TYPE(echnk.type) &&
-                           eet_data_type_match(echnk.type, ede->type))
-/* Needed when converting on the fly from FP to Float */
-                         type = ede->type;
-                       else if ((echnk.group_type > EET_G_UNKNOWN) &&
-                                (echnk.group_type < EET_G_LAST) &&
-                                (echnk.group_type == ede->group_type))
-                         group_type = echnk.group_type;
-                    }
-               }
-          }
-        /*...... dump to node */
-        else
-          {
-             type = echnk.type;
-             group_type = echnk.group_type;
-          }
-
-        if (!edd && group_type == EET_G_UNKNOWN && IS_SIMPLE_TYPE(type))
-          {
-             unsigned char dd[128];
-
-             ret = eet_data_get_type(ed,
-                                     type,
-                                     echnk.data,
-                                     ((char *)echnk.data) + echnk.size,
-                                     dd);
-             if (ret <= 0)
-               goto error;
-
-             child = eet_data_node_simple_type(type, echnk.name, dd);
-
-             eet_node_struct_append(result, echnk.name, child);
-          }
-        else
-          {
-             ret = eet_group_codec[group_type - 100].get(
-                 context,
-                 ed,
-                 edd,
-                 ede,
-                 &echnk,
-                 type,
-                 group_type,
-                 ede ? (void *)(((char *)data) + ede->offset) : (void **)&result,
-                 &p,
-                 &size);
-
-             if (ret <= 0)
-               goto error;
-          }
-
-        /* advance to next chunk */
-        NEXT_CHUNK(p, size, echnk, ed);
-     }
-
-   _eet_freelist_all_unref(context);
-   if (!edd)
-     {
-        _eet_freelist_str_free(context, edd);
-        _eet_freelist_direct_str_free(context, edd);
-        _eet_freelist_list_free(context, edd);
-        _eet_freelist_hash_free(context, edd);
-        _eet_freelist_array_free(context, edd);
-        _eet_freelist_free(context, edd);
-     }
-   else
-     {
-        _eet_freelist_reset(context);
-        _eet_freelist_str_reset(context);
-        _eet_freelist_list_reset(context);
-        _eet_freelist_hash_reset(context);
-        _eet_freelist_direct_str_reset(context);
-        _eet_freelist_array_reset(context);
-     }
-
-   if (!edd)
-     return result;
-
-   return data;
-
-error:
-   eet_node_del(result);
-
-   _eet_freelist_all_unref(context);
-   _eet_freelist_str_free(context, edd);
-   _eet_freelist_direct_str_free(context, edd);
-   _eet_freelist_list_free(context, edd);
-   _eet_freelist_hash_free(context, edd);
-   _eet_freelist_array_free(context, edd);
-   _eet_freelist_free(context, edd);
-
-   /* FIXME: Warn that something goes wrong here. */
-   return NULL;
-}
-
-static int
-eet_data_get_list(Eet_Free_Context     *context,
-                  const Eet_Dictionary *ed,
-                  Eet_Data_Descriptor  *edd,
-                  Eet_Data_Element     *ede,
-                  Eet_Data_Chunk       *echnk,
-                  int                   type,
-                  int                   group_type __UNUSED__,
-                  void                 *data,
-                  char                **p,
-                  int                  *size)
-{
-   Eet_Data_Descriptor *subtype = NULL;
-   void *list = NULL;
-   void **ptr;
-   void *data_ret;
-
-   EET_ASSERT(!((type > EET_T_UNKNOW) && (type < EET_T_STRING)), return 0);
-
-   if (ede)
-     {
-        subtype = ede->subtype;
-
-        if (type != ede->type)
-          return 0;
-     }
-
-   ptr = (void **)data;
-   list = *ptr;
-   data_ret = NULL;
-
-   if (IS_POINTER_TYPE(type))
-     POINTER_TYPE_DECODE(context,
-                         ed,
-                         edd,
-                         ede,
-                         echnk,
-                         type,
-                         &data_ret,
-                         p,
-                         size,
-                         on_error);
-   else
-     STRUCT_TYPE_DECODE(data_ret,
-                        context,
-                        ed,
-                        subtype,
-                        echnk->data,
-                        echnk->size,
-                        -1,
-                        on_error);
-
-   if (edd)
-     {
-        list = edd->func.list_append(list, data_ret);
-        *ptr = list;
-        _eet_freelist_list_add(context, ptr);
-     }
-   else
-     eet_node_list_append(*((Eet_Node **)data), echnk->name, data_ret);
-
-   return 1;
-
-on_error:
-   return 0;
-}
-
-static int
-eet_data_get_hash(Eet_Free_Context     *context,
-                  const Eet_Dictionary *ed,
-                  Eet_Data_Descriptor  *edd,
-                  Eet_Data_Element     *ede,
-                  Eet_Data_Chunk       *echnk,
-                  int                   type,
-                  int                   group_type __UNUSED__,
-                  void                 *data,
-                  char                **p,
-                  int                  *size)
-{
-   void **ptr;
-   void *hash = NULL;
-   char *key = NULL;
-   void *data_ret = NULL;
-   int ret = 0;
-
-   EET_ASSERT(!((type > EET_T_UNKNOW) && (type < EET_T_STRING)), return 0);
-
-   ptr = (void **)data;
-   hash = *ptr;
-
-   /* Read key */
-   ret = eet_data_get_type(ed,
-                           EET_T_STRING,
-                           echnk->data,
-                           ((char *)echnk->data) + echnk->size,
-                           &key);
-   if (ret <= 0)
-     goto on_error;
-
-   if (!key)
-     goto on_error;
-
-   /* Advance to next chunk */
-   NEXT_CHUNK((*p), (*size), (*echnk), ed);
-   memset(echnk, 0, sizeof(Eet_Data_Chunk));
-
-   /* Read value */
-   eet_data_chunk_get(ed, echnk, *p, *size);
-   if (!echnk->name)
-     goto on_error;
-
-   if (ede)
-     if ((ede->group_type != echnk->group_type)
-         || (ede->type != echnk->type))
-       goto on_error;
-
-   if (IS_POINTER_TYPE(echnk->type))
-     POINTER_TYPE_DECODE(context,
-                         ed,
-                         edd,
-                         ede,
-                         echnk,
-                         echnk->type,
-                         &data_ret,
-                         p,
-                         size,
-                         on_error);
-   else
-     STRUCT_TYPE_DECODE(data_ret,
-                        context,
-                        ed,
-                        ede ? ede->subtype : NULL,
-                        echnk->data,
-                        echnk->size,
-                        -1,
-                        on_error);
-
-   if (edd)
-     {
-        hash = edd->func.hash_add(hash, key, data_ret);
-        *ptr = hash;
-        _eet_freelist_hash_add(context, hash);
-     }
-   else
-     eet_node_hash_add(*((Eet_Node **)data), echnk->name, key, data_ret);
-
-   return 1;
-
-on_error:
-   return 0;
-}
-
-/* var arrays and fixed arrays have to
- * get all chunks at once. for fixed arrays
- * we can get each chunk and increment a
- * counter stored on the element itself but
- * it wont be thread safe. for var arrays
- * we still need a way to get the number of
- * elements from the data, so storing the
- * number of elements and the element data on
- * each chunk is pointless.
- */
-static int
-eet_data_get_array(Eet_Free_Context     *context,
-                   const Eet_Dictionary *ed,
-                   Eet_Data_Descriptor  *edd,
-                   Eet_Data_Element     *ede,
-                   Eet_Data_Chunk       *echnk,
-                   int                   type,
-                   int                   group_type,
-                   void                 *data,
-                   char                **p,
-                   int                  *size)
-{
-   Eina_List *childs = NULL;
-   const char *name;
-   Eet_Node *tmp;
-   void *ptr;
-   int count;
-   int ret;
-   int subsize = 0;
-   int i;
-
-   EET_ASSERT(!((type > EET_T_UNKNOW) && (type < EET_T_STRING)), return 0);
-
-   ptr = data;
-   /* read the number of elements */
-   ret = eet_data_get_type(ed,
-                           EET_T_INT,
-                           echnk->data,
-                           ((char *)echnk->data) + echnk->size,
-                           &count);
-   if (ret <= 0)
-     return ret;
-
-   name = echnk->name;
-
-   if (ede)
-     {
-        if (IS_POINTER_TYPE(type))
-          subsize = eet_basic_codec[ede->type].size;
-        else
-          subsize = ede->subtype->size;
-
-        if (group_type == EET_G_VAR_ARRAY)
-          {
-             /* store the number of elements
-              * on the counter offset */
-               *(int *)(((char *)data) + ede->count - ede->offset) = count;
-     /* allocate space for the array of elements */
-               if (edd->func.array_alloc)
-                 *(void **)ptr = edd->func.array_alloc(count * subsize);
-               else
-                 *(void **)ptr = edd->func.mem_alloc(count * subsize);
-
-               if (!*(void **)ptr)
-                 return 0;
-
-               memset(*(void **)ptr, 0, count * subsize);
-
-               _eet_freelist_array_add(context, *(void **)ptr);
-          }
-     }
-
-   /* get all array elements */
-   for (i = 0; i < count; i++)
-     {
-        void *dst = NULL;
-
-        /* Advance to next chunk */
-        NEXT_CHUNK((*p), (*size), (*echnk), ed);
-        memset(echnk, 0, sizeof(Eet_Data_Chunk));
-
-        eet_data_chunk_get(ed, echnk, *p, *size);
-        if (!echnk->name || strcmp(echnk->name, name) != 0)
-          goto on_error;  /* get the data */
-
-        if ((echnk->group_type != group_type)
-            || ((echnk->type != type) && (echnk->type != EET_T_NULL)))
-          goto on_error;
-
-        if (ede)
-          if ((ede->group_type != echnk->group_type)
-              || ((echnk->type != ede->type) && (echnk->type != EET_T_NULL)))
-            goto on_error;
-
-        /* get the destination pointer */
-        if (ede)
-          {
-             if (group_type == EET_G_ARRAY)
-               dst = (char *)ptr + (subsize * i);
-             else
-               dst = *(char **)ptr + (subsize * i);
-          }
-
-        if (IS_POINTER_TYPE(echnk->type))
-          {
-             void *data_ret = NULL;
-
-             POINTER_TYPE_DECODE(context,
-                                 ed,
-                                 edd,
-                                 ede,
-                                 echnk,
-                                 echnk->type,
-                                 &data_ret,
-                                 p,
-                                 size,
-                                 on_error);
-             if (dst)
-               memcpy(dst, &data_ret, subsize);
-
-             if (!edd)
-               childs = eina_list_append(childs, data_ret);
-          }
-        else
-          {
-             STRUCT_TYPE_DECODE(dst,
-                                context,
-                                ed,
-                                ede ? ede->subtype : NULL,
-                                echnk->data,
-                                echnk->size,
-                                subsize,
-                                on_error);
-
-             if (!edd)
-               childs = eina_list_append(childs, dst);
-          }
-     }
-
-   if (!edd)
-     {
-        Eet_Node *parent = *((Eet_Node **)data);
-        Eet_Node *array;
-
-        if (group_type == EET_G_ARRAY)
-          array = eet_node_array_new(name, count, childs);
-        else
-          array = eet_node_var_array_new(name, childs);
-
-        if (!array)
-          goto on_error;
-
-        eet_node_struct_append(parent, name, array);
-     }
-
-   return 1;
-
-on_error:
-   EINA_LIST_FREE(childs, tmp)
-     eet_node_del(tmp);
-
-   return 0;
-}
-
-static void
-eet_data_put_union(Eet_Dictionary      *ed,
-                   Eet_Data_Descriptor *edd __UNUSED__,
-                   Eet_Data_Element    *ede,
-                   Eet_Data_Stream     *ds,
-                   void                *data_in)
-{
-   const char *union_type;
-   int i;
-
-   EET_ASSERT(!((ede->type != EET_T_UNKNOW) || (!ede->subtype)), return );
-
-   union_type = ede->subtype->func.type_get(
-       ((char *)data_in) + ede->count - ede->offset,
-       NULL);
-
-   if (!union_type)
-     return;
-
-   /* Search the structure of the union to encode. */
-   for (i = 0; i < ede->subtype->elements.num; ++i)
-     if (strcmp(ede->subtype->elements.set[i].name, union_type) == 0)
-       {
-          Eet_Data_Element *sede;
-          void *data;
-          int size;
-
-          /* Yeah we found it ! */
-          data = eet_data_put_type(ed, EET_T_STRING, &union_type, &size);
-          if (data)
-            eet_data_encode(ed,
-                            ds,
-                            data,
-                            ede->name,
-                            size,
-                            ede->type,
-                            ede->group_type);
-
-          sede = &(ede->subtype->elements.set[i]);
-          data = _eet_data_descriptor_encode(ed,
-                                             sede->subtype,
-                                             data_in,
-                                             &size);
-          if (data)
-            eet_data_encode(ed,
-                            ds,
-                            data,
-                            ede->name,
-                            size,
-                            ede->type,
-                            ede->group_type);
-
-          break;
-       }
-}
-
-static int
-eet_data_get_union(Eet_Free_Context     *context,
-                   const Eet_Dictionary *ed,
-                   Eet_Data_Descriptor  *edd __UNUSED__,
-                   Eet_Data_Element     *ede,
-                   Eet_Data_Chunk       *echnk,
-                   int                   type,
-                   int                   group_type,
-                   void                 *data,
-                   char                **p,
-                   int                  *size)
-{
-   const char *union_type;
-   void *data_ret = NULL;
-   int ret = 0;
-   int i;
-
-   /* Read type */
-   ret = eet_data_get_type(ed,
-                           EET_T_STRING,
-                           echnk->data,
-                           ((char *)echnk->data) + echnk->size,
-                           &union_type);
-   if (ret <= 0)
-     goto on_error;
-
-   /* Advance to next chunk */
-   NEXT_CHUNK((*p), (*size), (*echnk), ed);
-   memset(echnk, 0, sizeof(Eet_Data_Chunk));
-
-   /* Read value */
-   eet_data_chunk_get(ed, echnk, *p, *size);
-   if (!echnk->name)
-     goto on_error;
-
-   if (ede)
-     {
-        EET_ASSERT(!(ede->group_type != group_type || ede->type != type),
-                   goto on_error);
-
-        /* Search the structure of the union to decode */
-        for (i = 0; i < ede->subtype->elements.num; ++i)
-          if (strcmp(ede->subtype->elements.set[i].name, union_type) == 0)
-            {
-               Eet_Data_Element *sede;
-               char *ut;
-
-               /* Yeah we found it ! */
-               sede = &(ede->subtype->elements.set[i]);
-               EET_ASSERT(sede->subtype, goto on_error);
-
-               data_ret = _eet_data_descriptor_decode(context,
-                                                      ed,
-                                                      sede->subtype,
-                                                      echnk->data,
-                                                      echnk->size,
-                                                      data,
-                                                      sede->subtype->size);
-               if (!data_ret)
-                 goto on_error;
-
-               /* Set union type. */
-               if ((!ed) || (!ede->subtype->func.str_direct_alloc))
-                 {
-                    ut = ede->subtype->func.str_alloc(union_type);
-                    _eet_freelist_str_add(context, ut);
-                 }
-               else
-                 {
-                    ut = ede->subtype->func.str_direct_alloc(union_type);
-                    _eet_freelist_direct_str_add(context, ut);
-                 }
-
-               ede->subtype->func.type_set(
-                 ut,
-                 ((char *)data) + ede->count -
-                 ede->offset,
-                 EINA_FALSE);
-
-               break;
-            }
-     }
-   else
-     {
-        /* FIXME: generate node structure. */
-         data_ret = _eet_data_descriptor_decode(context,
-                                                ed, NULL,
-                                                echnk->data, echnk->size,
-                                                NULL, 0);
-         goto on_error;
-     }
-
-   return 1;
-
-on_error:
-   return 0;
-}
-
-static void
-eet_data_put_variant(Eet_Dictionary      *ed,
-                     Eet_Data_Descriptor *edd __UNUSED__,
-                     Eet_Data_Element    *ede,
-                     Eet_Data_Stream     *ds,
-                     void                *data_in)
-{
-   const char *union_type;
-   void *data;
-   Eina_Bool unknow = EINA_FALSE;
-   int size;
-   int i;
-
-   EET_ASSERT(!((ede->type != EET_T_UNKNOW) || (!ede->subtype)), return );
-
-   union_type = ede->subtype->func.type_get(
-       ((char *)data_in) + ede->count - ede->offset,
-       &unknow);
-
-   if (!union_type && unknow == EINA_FALSE)
-     return;
-
-   if (unknow)
-     {
-        /* Handle opaque internal representation */
-         Eet_Variant_Unknow *evu;
-
-         data = eet_data_put_type(ed, EET_T_STRING, &union_type, &size);
-         if (data)
-           eet_data_encode(ed,
-                           ds,
-                           data,
-                           ede->name,
-                           size,
-                           ede->type,
-                           ede->group_type);
-
-         evu = (Eet_Variant_Unknow *)data_in;
-         if (evu && EINA_MAGIC_CHECK(evu, EET_MAGIC_VARIANT))
-           eet_data_encode(ed,
-                           ds,
-                           evu->data,
-                           ede->name,
-                           evu->size,
-                           ede->type,
-                           ede->group_type);
-     }
-   else
-     /* Search the structure of the union to encode. */
-     for (i = 0; i < ede->subtype->elements.num; ++i)
-       if (strcmp(ede->subtype->elements.set[i].name, union_type) == 0)
-         {
-            Eet_Data_Element *sede;
-
-            /* Yeah we found it ! */
-            data = eet_data_put_type(ed, EET_T_STRING, &union_type, &size);
-            if (data)
-              eet_data_encode(ed,
-                              ds,
-                              data,
-                              ede->name,
-                              size,
-                              ede->type,
-                              ede->group_type);
-
-            sede = &(ede->subtype->elements.set[i]);
-
-            if (sede->group_type != EET_G_UNKNOWN)
-              {
-                 Eet_Data_Stream *lds;
-
-                 lds = eet_data_stream_new();
-                 eet_group_codec[sede->group_type - 100].put(ed,
-                                                             sede->subtype,
-                                                             sede,
-                                                             lds,
-                                                             data_in);
-                 if (lds->size != 0)
-                   {
-                      eet_data_encode(ed, ds, lds->data, ede->name, lds->pos,
-                                      ede->type, ede->group_type);
-
-                      lds->data = NULL;
-                      lds->size = 0;
-                   }
-                 else
-                   eet_data_encode(ed, ds, NULL, ede->name, 0,
-                                   EET_T_NULL, ede->group_type);
-
-                 eet_data_stream_free(lds);
-              }
-            else
-              {
-                 data = _eet_data_descriptor_encode(ed,
-                                                    sede->subtype,
-                                                    *(void **)data_in,
-                                                    &size);
-                 if (data)
-                   eet_data_encode(ed,
-                                   ds,
-                                   data,
-                                   ede->name,
-                                   size,
-                                   ede->type,
-                                   ede->group_type);
-              }
-
-            break;
-         }
-}
-
-static int
-eet_data_get_variant(Eet_Free_Context     *context,
-                     const Eet_Dictionary *ed,
-                     Eet_Data_Descriptor  *edd __UNUSED__,
-                     Eet_Data_Element     *ede,
-                     Eet_Data_Chunk       *echnk,
-                     int                   type __UNUSED__,
-                     int                   group_type __UNUSED__,
-                     void                 *data,
-                     char                **p,
-                     int                  *size)
-{
-   const char *union_type;
-   void *data_ret = NULL;
-   int ret = 0;
-   int i;
-
-   /* Read type */
-   ret = eet_data_get_type(ed,
-                           EET_T_STRING,
-                           echnk->data,
-                           ((char *)echnk->data) + echnk->size,
-                           &union_type);
-   if (ret <= 0)
-     goto on_error;
-
-   /* Advance to next chunk */
-   NEXT_CHUNK((*p), (*size), (*echnk), ed);
-   memset(echnk, 0, sizeof(Eet_Data_Chunk));
-
-   /* Read value */
-   eet_data_chunk_get(ed, echnk, *p, *size);
-   if (!echnk->name)
-     goto on_error;
-
-   if (ede)
-     {
-        char *ut;
-
-        EET_ASSERT(ede->subtype, goto on_error);
-
-        if ((!ed) || (!ede->subtype->func.str_direct_alloc))
-          {
-             ut = ede->subtype->func.str_alloc(union_type);
-             _eet_freelist_str_add(context, ut);
-          }
-        else
-          {
-             ut = ede->subtype->func.str_direct_alloc(union_type);
-             _eet_freelist_direct_str_add(context, ut);
-          }
-
-        /* Search the structure of the union to decode */
-        for (i = 0; i < ede->subtype->elements.num; ++i)
-          if (strcmp(ede->subtype->elements.set[i].name, union_type) == 0)
-            {
-               Eet_Data_Element *sede;
-
-               /* Yeah we found it ! */
-               sede = &(ede->subtype->elements.set[i]);
-
-               if (sede->group_type != EET_G_UNKNOWN)
-                 {
-                    Eet_Data_Chunk chnk;
-                    char *p2;
-                    int size2;
-
-                    p2 = echnk->data;
-                    size2 = echnk->size;
-
-     /* Didn't find a proper way to provide this
-        without duplicating code */
-                    while (size2 > 0)
-                      {
-                         memset(&chnk, 0, sizeof(Eet_Data_Chunk));
-                         eet_data_chunk_get(ed, &chnk, p2, size2);
-
-                         if (!chnk.name)
-                           goto on_error;
-
-                         ret = eet_group_codec[sede->group_type - 100].get
-                             (context, ed, sede->subtype, sede, &chnk, sede->type,
-                             sede->group_type, data, &p2, &size2);
-
-                         if (ret <= 0)
-                           goto on_error;
-
-/* advance to next chunk */
-                         NEXT_CHUNK(p2, size2, chnk, ed);
-                      }
-
-     /* Put garbage so that we will not put eet_variant_unknow in it */
-                    data_ret = (void *)data;
-
-     /* Set variant type. */
-                    ede->subtype->func.type_set
-                      (ut, ((char *)data) + ede->count - ede->offset,
-                      EINA_FALSE);
-                    break;
-                 }
-
-               data_ret = _eet_data_descriptor_decode(context,
-                                                      ed,
-                                                      sede->subtype,
-                                                      echnk->data,
-                                                      echnk->size,
-                                                      NULL, 0);
-               if (!data_ret)
-                 break;
-
-               /* And point to the variant data. */
-               *(void **)data = data_ret;
-
-               /* Set variant type. */
-               ede->subtype->func.type_set
-                 (ut, ((char *)data) + ede->count - ede->offset, EINA_FALSE);
-               break;
-            }
-
-        if (!data_ret)
-          {
-             Eet_Variant_Unknow *evu;
-
-             evu = calloc(1, sizeof (Eet_Variant_Unknow) + echnk->size - 1);
-             if (!evu)
-               goto on_error;
-
-             evu->size = echnk->size;
-             memcpy(evu->data, echnk->data, evu->size);
-             EINA_MAGIC_SET(evu, EET_MAGIC_VARIANT);
-
-             /* And point to the opaque internal data scructure */
-             *(void **)data = evu;
-
-             /* Set variant type. */
-             ede->subtype->func.type_set
-               (ut, ((char *)data) + ede->count - ede->offset, EINA_TRUE);
-          }
-     }
-   else
-     {
-        /* FIXME: dump node structure. */
-         data_ret = _eet_data_descriptor_decode(context,
-                                                ed, NULL,
-                                                echnk->data, echnk->size,
-                                                NULL, 0);
-         goto on_error;
-     }
-
-   return 1;
-
-on_error:
-   return 0;
-}
-
-static Eet_Node *
-eet_data_node_simple_type(int         type,
-                          const char *name,
-                          void       *dd)
-{
-#ifdef EET_T_TYPE
-# undef EET_T_TYPE
-#endif /* ifdef EET_T_TYPE */
-
-#define EET_T_TYPE(Eet_Type, Eet_Node_Type, Type)                 \
-case Eet_Type:                                                    \
-  return eet_node_ ## Eet_Node_Type ## _new(name, *((Type *)dd)); \
-
-   switch (type)
-     {
-        EET_T_TYPE(EET_T_CHAR, char, char);
-        EET_T_TYPE(EET_T_SHORT, short, short);
-        EET_T_TYPE(EET_T_INT, int, int);
-        EET_T_TYPE(EET_T_LONG_LONG, long_long, long long);
-        EET_T_TYPE(EET_T_FLOAT, float, float);
-        EET_T_TYPE(EET_T_DOUBLE, double, double);
-        EET_T_TYPE(EET_T_UCHAR, unsigned_char, unsigned char);
-        EET_T_TYPE(EET_T_USHORT, unsigned_short, unsigned short);
-        EET_T_TYPE(EET_T_UINT, unsigned_int, unsigned int);
-        EET_T_TYPE(EET_T_ULONG_LONG, unsigned_long_long, unsigned long long);
-        EET_T_TYPE(EET_T_STRING, string, char *);
-        EET_T_TYPE(EET_T_INLINED_STRING, inlined_string, char *);
-
-      case EET_T_NULL:
-        return eet_node_null_new(name);
-
-      default:
-        ERR("Unknow type passed to eet_data_node_simple_type");
-        return NULL;
-     }
-}
-
-static int
-eet_data_get_unknown(Eet_Free_Context     *context,
-                     const Eet_Dictionary *ed,
-                     Eet_Data_Descriptor  *edd,
-                     Eet_Data_Element     *ede,
-                     Eet_Data_Chunk       *echnk,
-                     int                   type,
-                     int                   group_type __UNUSED__,
-                     void                 *data,
-                     char                **p __UNUSED__,
-                     int                  *size __UNUSED__)
-{
-   int ret;
-   void *data_ret;
-
-   if (IS_SIMPLE_TYPE(type))
-     {
-        unsigned char dd[128];
-
-        ret = eet_data_get_type(ed,
-                                type,
-                                echnk->data,
-                                ((char *)echnk->data) + echnk->size,
-                                edd ? (char *)data : (char *)dd);
-        if (ret <= 0)
-          return ret;
-
-        if (!edd)
-          {
-             Eet_Node **parent = data;
-             Eet_Node *node;
-
-             node = eet_data_node_simple_type(type, echnk->name, dd);
-
-             if (*parent)
-               eet_node_struct_append(*parent, echnk->name, node);
-             else
-               *parent = node;
-          }
-        else
-          {
-             if (type == EET_T_STRING)
-               {
-                  char **str;
-
-                  str = (char **)(((char *)data));
-                  if (*str)
-                    {
-                       if ((!ed) || (!edd->func.str_direct_alloc))
-                         {
-                            *str = edd->func.str_alloc(*str);
-                            _eet_freelist_str_add(context, *str);
-                         }
-                       else
-                         {
-                            *str = edd->func.str_direct_alloc(*str);
-                            _eet_freelist_direct_str_add(context, *str);
-                         }
-                    }
-               }
-             else if (edd && type == EET_T_INLINED_STRING)
-               {
-                  char **str;
-
-                  str = (char **)(((char *)data));
-                  if (*str)
-                    {
-                       *str = edd->func.str_alloc(*str);
-                       _eet_freelist_str_add(context, *str);
-                    }
-               }
-          }
-     }
-   else
-     {
-        Eet_Data_Descriptor *subtype;
-
-        subtype = ede ? ede->subtype : NULL;
-
-        if (subtype || !edd)
-          {
-             Eet_Node **parent = data;
-             void **ptr;
-
-             data_ret = _eet_data_descriptor_decode(context,
-                                                    ed,
-                                                    subtype,
-                                                    echnk->data,
-                                                    echnk->size,
-                                                    NULL, 0);
-             if (!data_ret)
-               return 0;
-
-             if (edd)
-               {
-                  ptr = (void **)(((char *)data));
-                  *ptr = (void *)data_ret;
-               }
-             else
-               {
-                  Eet_Node *node = data_ret;
-
-                  if (*parent)
-                    {
-                       node = eet_node_struct_child_new(echnk->name, node);
-                       eet_node_struct_append(*parent, echnk->name, node);
-                    }
-                  else
-                    *parent = node;
-               }
-          }
-     }
-
-   return 1;
-}
-
-static void
-eet_data_put_array(Eet_Dictionary      *ed,
-                   Eet_Data_Descriptor *edd __UNUSED__,
-                   Eet_Data_Element    *ede,
-                   Eet_Data_Stream     *ds,
-                   void                *data_in)
-{
-   void *data;
-   int offset = 0;
-   int subsize;
-   int count;
-   int size;
-   int j;
-
-   EET_ASSERT(!((ede->type > EET_T_UNKNOW) && (ede->type < EET_T_STRING)),
-              return );
-
-   if (ede->group_type == EET_G_ARRAY)
-     count = ede->counter_offset;
-   else
-     count = *(int *)(((char *)data_in) + ede->count - ede->offset);
-
-   if (count <= 0)
-     return;  /* Store number of elements */
-
-   data = eet_data_put_type(ed, EET_T_INT, &count, &size);
-   if (data)
-     eet_data_encode(ed, ds, data, ede->name, size, ede->type, ede->group_type);
-
-   if (IS_POINTER_TYPE(ede->type))
-     subsize = eet_basic_codec[ede->type].size;
-   else
-     subsize = ede->subtype->size;
-
-   for (j = 0; j < count; j++)
-     {
-        void *d;
-        int pos = ds->pos;
-
-        if (ede->group_type == EET_G_ARRAY)
-          d = (void *)(((char *)data_in) + offset);
-        else
-          d = *(((char **)data_in)) + offset;
-
-        if (IS_POINTER_TYPE(ede->type))
-          {
-             if (*(char **)d)
-               eet_data_put_unknown(ed, NULL, ede, ds, d);
-          }
-        else
-          {
-             data = _eet_data_descriptor_encode(ed, ede->subtype, d, &size);
-             if (data)
-               eet_data_encode(ed,
-                               ds,
-                               data,
-                               ede->name,
-                               size,
-                               ede->type,
-                               ede->group_type);
-          }
-
-        if (pos == ds->pos)
-          /* Add a NULL element just to have the correct array layout. */
-          eet_data_encode(ed,
-                          ds,
-                          NULL,
-                          ede->name,
-                          0,
-                          EET_T_NULL,
-                          ede->group_type);
-
-        offset += subsize;
-     }
-}
-
-static void
-eet_data_put_unknown(Eet_Dictionary      *ed,
-                     Eet_Data_Descriptor *edd __UNUSED__,
-                     Eet_Data_Element    *ede,
-                     Eet_Data_Stream     *ds,
-                     void                *data_in)
-{
-   void *data = NULL;
-   int size;
-
-   if (IS_SIMPLE_TYPE(ede->type))
-     data = eet_data_put_type(ed, ede->type, data_in, &size);
-   else if (ede->subtype)
-     if (*((char **)data_in))
-       data = _eet_data_descriptor_encode(ed,
-                                          ede->subtype,
-                                          *((char **)((char *)(data_in))),
-                                          &size);
-
-   if (data)
-     eet_data_encode(ed,
-                     ds,
-                     data,
-                     ede->name,
-                     size,
-                     ede->type,
-                     ede->group_type);
-}
-
-static void
-eet_data_put_list(Eet_Dictionary      *ed,
-                  Eet_Data_Descriptor *edd,
-                  Eet_Data_Element    *ede,
-                  Eet_Data_Stream     *ds,
-                  void                *data_in)
-{
-   void *data;
-   void *l;
-   int size;
-
-   EET_ASSERT(!(((ede->type > EET_T_UNKNOW) && (ede->type < EET_T_STRING))
-                || ((ede->type > EET_T_NULL) && (ede->type < EET_T_LAST))),
-              return );
-
-   l = *((void **)(((char *)data_in)));
-   for (; l; l = edd->func.list_next(l))
-     {
-        if (IS_POINTER_TYPE(ede->type))
-          {
-             const void *str = edd->func.list_data(l);
-             eet_data_put_unknown(ed, NULL, ede, ds, &str);
-          }
-        else
-          {
-             data = _eet_data_descriptor_encode(ed,
-                                                ede->subtype,
-                                                edd->func.list_data(l),
-                                                &size);
-             if (data)
-               eet_data_encode(ed,
-                               ds,
-                               data,
-                               ede->name,
-                               size,
-                               ede->type,
-                               ede->group_type);
-          }
-     }
-}
-
-static void
-eet_data_put_hash(Eet_Dictionary      *ed,
-                  Eet_Data_Descriptor *edd,
-                  Eet_Data_Element    *ede,
-                  Eet_Data_Stream     *ds,
-                  void                *data_in)
-{
-   Eet_Data_Encode_Hash_Info fdata;
-   void *l;
-
-   l = *((void **)(((char *)data_in)));
-   fdata.ds = ds;
-   fdata.ede = ede;
-   fdata.ed = ed;
-   edd->func.hash_foreach(l, eet_data_descriptor_encode_hash_cb, &fdata);
-}
-
-EAPI int
-eet_data_dump_cipher(Eet_File         *ef,
-                     const char       *name,
-                     const char       *cipher_key,
-                     Eet_Dump_Callback dumpfunc,
-                     void             *dumpdata)
-{
-   const Eet_Dictionary *ed = NULL;
-   const void *data = NULL;
-   Eet_Node *result;
-   Eet_Free_Context context;
-   int required_free = 0;
-   int size;
-
-   ed = eet_dictionary_get(ef);
-
-   if (!cipher_key)
-     data = eet_read_direct(ef, name, &size);
-
-   if (!data)
-     {
-        required_free = 1;
-        data = eet_read_cipher(ef, name, &size, cipher_key);
-        if (!data)
-          return 0;
-     }
-
-   eet_free_context_init(&context);
-   result = _eet_data_descriptor_decode(&context, ed, NULL, data, size, NULL, 0);
-   eet_free_context_shutdown(&context);
-
-   eet_node_dump(result, 0, dumpfunc, dumpdata);
-
-   eet_node_del(result);
-
-   if (required_free)
-     free((void *)data);
-
-   return result ? 1 : 0;
-}
-
-EAPI int
-eet_data_dump(Eet_File         *ef,
-              const char       *name,
-              Eet_Dump_Callback dumpfunc,
-              void             *dumpdata)
-{
-   return eet_data_dump_cipher(ef, name, NULL, dumpfunc, dumpdata);
-}
-
-EAPI int
-eet_data_text_dump_cipher(const void       *data_in,
-                          const char       *cipher_key,
-                          int               size_in,
-                          Eet_Dump_Callback dumpfunc,
-                          void             *dumpdata)
-{
-   void *ret = NULL;
-   Eet_Node *result;
-   Eet_Free_Context context;
-   unsigned int ret_len = 0;
-
-   if (!data_in)
-     return 0;
-
-   if (cipher_key)
-     {
-        if (eet_decipher(data_in, size_in, cipher_key,
-                         strlen(cipher_key), &ret, &ret_len))
-          {
-             if (ret)
-               free(ret);
-
-             return 0;
-          }
-     }
-   else
-     {
-        ret = (void *)data_in;
-        ret_len = size_in;
-     }
-
-   eet_free_context_init(&context);
-   result = _eet_data_descriptor_decode(&context, NULL, NULL, ret, ret_len, NULL, 0);
-   eet_free_context_shutdown(&context);
-
-   eet_node_dump(result, 0, dumpfunc, dumpdata);
-
-   eet_node_del(result);
-   if (cipher_key)
-     free(ret);
-
-   return result ? 1 : 0;
-}
-
-EAPI int
-eet_data_text_dump(const void       *data_in,
-                   int               size_in,
-                   Eet_Dump_Callback dumpfunc,
-                   void             *dumpdata)
-{
-   return eet_data_text_dump_cipher(data_in, NULL, size_in, dumpfunc, dumpdata);
-}
-
-EAPI void *
-eet_data_text_undump_cipher(const char *text,
-                            const char *cipher_key,
-                            int         textlen,
-                            int        *size_ret)
-{
-   void *ret = NULL;
-
-   ret = _eet_data_dump_parse(NULL, size_ret, text, textlen);
-   if (ret && cipher_key)
-     {
-        void *ciphered = NULL;
-        unsigned int ciphered_len;
-
-        if (eet_cipher(ret, *size_ret, cipher_key,
-                       strlen(cipher_key), &ciphered, &ciphered_len))
-          {
-             if (ciphered)
-               free(ciphered);
-
-             size_ret = 0;
-             free(ret);
-             return NULL;
-          }
-
-        free(ret);
-        *size_ret = ciphered_len;
-        ret = ciphered;
-     }
-
-   return ret;
-}
-
-EAPI void *
-eet_data_text_undump(const char *text,
-                     int         textlen,
-                     int        *size_ret)
-{
-   return eet_data_text_undump_cipher(text, NULL, textlen, size_ret);
-}
-
-EAPI int
-eet_data_undump_cipher(Eet_File   *ef,
-                       const char *name,
-                       const char *cipher_key,
-                       const char *text,
-                       int         textlen,
-                       int         compress)
-{
-   Eet_Dictionary *ed;
-   void *data_enc;
-   int size;
-   int val;
-
-   ed = eet_dictionary_get(ef);
-
-   data_enc = _eet_data_dump_parse(ed, &size, text, textlen);
-   if (!data_enc)
-     return 0;
-
-   val = eet_write_cipher(ef, name, data_enc, size, compress, cipher_key);
-   free(data_enc);
-   return val;
-}
-
-EAPI int
-eet_data_undump(Eet_File   *ef,
-                const char *name,
-                const char *text,
-                int         textlen,
-                int         compress)
-{
-   return eet_data_undump_cipher(ef, name, NULL, text, textlen, compress);
-}
-
-EAPI void *
-eet_data_descriptor_decode_cipher(Eet_Data_Descriptor *edd,
-                                  const void          *data_in,
-                                  const char          *cipher_key,
-                                  int                  size_in)
-{
-   void *deciphered = (void *)data_in;
-   void *ret;
-   Eet_Free_Context context;
-   unsigned int deciphered_len = size_in;
-
-   if (cipher_key && data_in)
-     if (eet_decipher(data_in, size_in, cipher_key,
-                      strlen(cipher_key), &deciphered, &deciphered_len))
-       {
-          if (deciphered)
-            free(deciphered);
-
-          return NULL;
-       }
-
-   eet_free_context_init(&context);
-   ret = _eet_data_descriptor_decode(&context,
-                                     NULL,
-                                     edd,
-                                     deciphered,
-                                     deciphered_len,
-                                     NULL, 0);
-   eet_free_context_shutdown(&context);
-
-   if (data_in != deciphered)
-     free(deciphered);
-
-   return ret;
-}
-
-EAPI void *
-eet_data_descriptor_decode(Eet_Data_Descriptor *edd,
-                           const void          *data_in,
-                           int                  size_in)
-{
-   return eet_data_descriptor_decode_cipher(edd, data_in, NULL, size_in);
-}
-
-EAPI Eet_Node *
-eet_data_node_decode_cipher(const void *data_in,
-                            const char *cipher_key,
-                            int         size_in)
-{
-   void *deciphered = (void *)data_in;
-   Eet_Node *ret;
-   Eet_Free_Context context;
-   unsigned int deciphered_len = size_in;
-
-   if (cipher_key && data_in)
-     if (eet_decipher(data_in, size_in, cipher_key,
-                      strlen(cipher_key), &deciphered, &deciphered_len))
-       {
-          if (deciphered)
-            free(deciphered);
-
-          return NULL;
-       }
-
-   eet_free_context_init(&context);
-   ret = _eet_data_descriptor_decode(&context,
-                                     NULL,
-                                     NULL,
-                                     deciphered,
-                                     deciphered_len,
-                                     NULL, 0);
-   eet_free_context_shutdown(&context);
-
-   if (data_in != deciphered)
-     free(deciphered);
-
-   return ret;
-}
-
-static void *
-_eet_data_descriptor_encode(Eet_Dictionary      *ed,
-                            Eet_Data_Descriptor *edd,
-                            const void          *data_in,
-                            int                 *size_ret)
-{
-   Eet_Data_Stream *ds;
-   Eet_Data_Chunk *chnk;
-   void *cdata;
-   int csize;
-   int i;
-
-   if (_eet_data_words_bigendian == -1)
-     {
-        unsigned long int v;
-
-        v = htonl(0x12345678);
-        if (v == 0x12345678)
-          _eet_data_words_bigendian = 1;
-        else
-          _eet_data_words_bigendian = 0;
-     }
-
-   ds = eet_data_stream_new();
-   for (i = 0; i < edd->elements.num; i++)
-     {
-        Eet_Data_Element *ede;
-
-        ede = &(edd->elements.set[i]);
-        eet_group_codec[ede->group_type - 100].put(
-          ed,
-          edd,
-          ede,
-          ds,
-          ((char *)data_in) +
-          ede->offset);
-     }
-   chnk = eet_data_chunk_new(ds->data,
-                             ds->pos,
-                             edd->name,
-                             EET_T_UNKNOW,
-                             EET_G_UNKNOWN);
-   ds->data = NULL;
-   ds->size = 0;
-   eet_data_stream_free(ds);
-
-   ds = eet_data_stream_new();
-   eet_data_chunk_put(ed, chnk, ds);
-   cdata = ds->data;
-   csize = ds->pos;
-
-   ds->data = NULL;
-   ds->size = 0;
-   eet_data_stream_free(ds);
-   *size_ret = csize;
-
-   free(chnk->data);
-   eet_data_chunk_free(chnk);
-
-   return cdata;
-}
-
-EAPI int
-eet_data_node_write_cipher(Eet_File   *ef,
-                           const char *name,
-                           const char *cipher_key,
-                           Eet_Node   *node,
-                           int         compress)
-{
-   Eet_Dictionary *ed;
-   void *data_enc;
-   int size;
-   int val;
-
-   ed = eet_dictionary_get(ef);
-
-   data_enc = _eet_data_dump_encode(EET_G_UNKNOWN, ed, node, &size);
-   if (!data_enc)
-     return 0;
-
-   val = eet_write_cipher(ef, name, data_enc, size, compress, cipher_key);
-   free(data_enc);
-   return val;
-}
-
-EAPI void *
-eet_data_node_encode_cipher(Eet_Node   *node,
-                            const char *cipher_key,
-                            int        *size_ret)
-{
-   void *ret = NULL;
-   void *ciphered = NULL;
-   unsigned int ciphered_len = 0;
-   int size;
-
-   ret = _eet_data_dump_encode(EET_G_UNKNOWN, NULL, node, &size);
-   if (cipher_key && ret)
-     {
-        if (eet_cipher(ret, size, cipher_key,
-                       strlen(cipher_key), &ciphered, &ciphered_len))
-          {
-             if (ciphered)
-               free(ciphered);
-
-             if (size_ret)
-               *size_ret = 0;
-
-             free(ret);
-             return NULL;
-          }
-
-        free(ret);
-        size = (int)ciphered_len;
-        ret = ciphered;
-     }
-
-   if (size_ret)
-     *size_ret = size;
-
-   return ret;
-}
-
-EAPI void *
-eet_data_descriptor_encode_cipher(Eet_Data_Descriptor *edd,
-                                  const void          *data_in,
-                                  const char          *cipher_key,
-                                  int                 *size_ret)
-{
-   void *ret = NULL;
-   void *ciphered = NULL;
-   unsigned int ciphered_len = 0;
-   int size;
-
-   ret = _eet_data_descriptor_encode(NULL, edd, data_in, &size);
-   if (cipher_key && ret)
-     {
-        if (eet_cipher(ret, size, cipher_key,
-                       strlen(cipher_key), &ciphered, &ciphered_len))
-          {
-             if (ciphered)
-               free(ciphered);
-
-             if (size_ret)
-               *size_ret = 0;
-
-             free(ret);
-             return NULL;
-          }
-
-        free(ret);
-        size = ciphered_len;
-        ret = ciphered;
-     }
-
-   if (size_ret)
-     *size_ret = size;
-
-   return ret;
-}
-
-EAPI void *
-eet_data_descriptor_encode(Eet_Data_Descriptor *edd,
-                           const void          *data_in,
-                           int                 *size_ret)
-{
-   return eet_data_descriptor_encode_cipher(edd, data_in, NULL, size_ret);
-}
-
-EAPI void *
-eet_data_xattr_cipher_get(const char          *filename,
-                          const char          *attribute,
-                          Eet_Data_Descriptor *edd,
-                          const char          *cipher_key)
-{
-   void *blob;
-   void *ret;
-   ssize_t size;
-
-   blob = eina_xattr_get(filename, attribute, &size);
-   if (!blob) return NULL;
-
-   ret = eet_data_descriptor_decode_cipher(edd, blob, cipher_key, size);
-   free(blob);
-
-   return ret;
-}
-
-EAPI Eina_Bool
-eet_data_xattr_cipher_set(const char          *filename,
-                          const char          *attribute,
-                          Eet_Data_Descriptor *edd,
-                          const char          *cipher_key,
-                          const void          *data,
-                          Eina_Xattr_Flags     flags)
-{
-   void *blob;
-   int size;
-   Eina_Bool ret;
-
-   blob = eet_data_descriptor_encode_cipher(edd, data, cipher_key, &size);
-   if (!blob) return EINA_FALSE;
-
-   ret = eina_xattr_set(filename, attribute, blob, size, flags);
-   free(blob);
-
-   return ret;
-}
diff --git a/libraries/eet/src/lib/eet_dictionary.c b/libraries/eet/src/lib/eet_dictionary.c
deleted file mode 100644
index c79239b..0000000
--- a/libraries/eet/src/lib/eet_dictionary.c
+++ /dev/null
@@ -1,444 +0,0 @@
-#ifdef HAVE_CONFIG_H
-# include <config.h>
-#endif /* ifdef HAVE_CONFIG_H */
-
-#include <stdio.h>
-#include <string.h>
-#include <math.h>
-
-#include <Eina.h>
-
-#include "Eet.h"
-#include "Eet_private.h"
-
-Eet_Dictionary *
-eet_dictionary_add(void)
-{
-   Eet_Dictionary *new;
-
-   new = eet_dictionary_calloc(1);
-   if (!new)
-     return NULL;
-
-   memset(new->hash, -1, sizeof (int) * 256);
-
-   return new;
-}
-
-void
-eet_dictionary_free(Eet_Dictionary *ed)
-{
-   int i;
-
-   if (!ed) return;
-
-   for (i = 0; i < ed->count; ++i)
-     if (ed->all[i].allocated)
-       eina_stringshare_del(ed->all[i].str);
-
-   if (ed->all)
-     free(ed->all);
-
-   if (ed->converts) eina_hash_free(ed->converts);
-
-   eet_dictionary_mp_free(ed);
-}
-
-static int
-_eet_dictionary_lookup(Eet_Dictionary *ed,
-                       const char     *string,
-                       int             len,
-                       int             hash)
-{
-   Eina_Bool found = EINA_FALSE;
-   int prev = -1;
-   int current;
-
-   current = ed->hash[hash];
-
-   while (current != -1)
-     {
-        if (ed->all[current].len == len)
-          {
-             if (ed->all[current].str &&
-                 (ed->all[current].str == string || strcmp(ed->all[current].str, string) == 0))
-               {
-                  found = EINA_TRUE;
-                  break;
-               }
-          }
-
-        prev = current;
-        current = ed->all[current].next;
-     }
-
-   if (current == -1 && found)
-     return prev;
-
-   return current;
-}
-
-int
-eet_dictionary_string_add(Eet_Dictionary *ed,
-                          const char     *string)
-{
-   Eet_String *current;
-   const char *str;
-   int hash;
-   int idx;
-   int len;
-
-   if (!ed)
-     return -1;
-
-   hash = _eet_hash_gen(string, 8);
-   len = strlen(string) + 1;
-
-   idx = _eet_dictionary_lookup(ed, string, len, hash);
-
-   if (idx != -1)
-     {
-        if (ed->all[idx].str && (ed->all[idx].str == string || strcmp(ed->all[idx].str, string) == 0))
-          return idx;
-     }
-
-   if (ed->total == ed->count)
-     {
-        Eet_String *new;
-        int total;
-
-        total = ed->total + 8;
-
-        new = realloc(ed->all, total * sizeof(Eet_String));
-        if (!new)
-          return -1;
-
-        ed->all = new;
-        ed->total = total;
-     }
-
-   str = eina_stringshare_add(string);
-   if (!str)
-     return -1;
-
-   current = ed->all + ed->count;
-
-   current->allocated = EINA_TRUE;
-
-   current->hash = hash;
-
-   current->str = str;
-   current->len = len;
-
-   if (idx == -1)
-     {
-        current->next = ed->hash[hash];
-        current->prev = -1;
-        ed->hash[hash] = ed->count;
-     }
-   else
-     {
-        current->next = idx;
-        current->prev = ed->all[idx].prev;
-
-        if (current->next != -1)
-          ed->all[current->next].prev = ed->count;
-
-        if (current->prev != -1)
-          ed->all[current->prev].next = ed->count;
-        else
-          ed->hash[hash] = ed->count;
-     }
-
-   return ed->count++;
-}
-
-int
-eet_dictionary_string_get_size(const Eet_Dictionary *ed,
-                               int                   idx)
-{
-   if (!ed)
-     return 0;
-
-   if (idx < 0)
-     return 0;
-
-   if (idx < ed->count)
-     return ed->all[idx].len;
-
-   return 0;
-}
-
-EAPI int
-eet_dictionary_count(const Eet_Dictionary *ed)
-{
-  return ed->count;
-}
-
-int
-eet_dictionary_string_get_hash(const Eet_Dictionary *ed,
-                               int                   idx)
-{
-   if (!ed)
-     return -1;
-
-   if (idx < 0)
-     return -1;
-
-   if (idx < ed->count)
-     return ed->all[idx].hash;
-
-   return -1;
-}
-
-const char *
-eet_dictionary_string_get_char(const Eet_Dictionary *ed,
-                               int                   idx)
-{
-   if (!ed)
-     return NULL;
-
-   if (idx < 0)
-     return NULL;
-
-   if (idx < ed->count)
-     {
-#ifdef _WIN32
-        /* Windows file system could change the mmaped file when replacing a file. So we need to copy all string in memory to avoid bugs. */
-        if (!ed->all[idx].allocated)
-          {
-             ed->all[idx].str = eina_stringshare_add(ed->all[idx].str);
-             ed->all[idx].allocated = EINA_TRUE;
-          }
-#endif /* ifdef _WIN32 */
-        return ed->all[idx].str;
-     }
-
-   return NULL;
-}
-
-static inline Eina_Bool
-_eet_dictionary_string_get_me_cache(const char *s,
-                                    int         len,
-                                    int        *mantisse,
-                                    int        *exponent)
-{
-   if ((len == 6) && (s[0] == '0') && (s[1] == 'x') && (s[3] == 'p'))
-     {
-        *mantisse = (s[2] >= 'a') ? (s[2] - 'a' + 10) : (s[2] - '0');
-        *exponent = (s[5] - '0');
-
-        return EINA_TRUE;
-     }
-
-   return EINA_FALSE;
-}
-
-static inline Eina_Bool
-_eet_dictionary_string_get_float_cache(const char *s,
-                                       int         len,
-                                       float      *result)
-{
-   int mantisse;
-   int exponent;
-
-   if (_eet_dictionary_string_get_me_cache(s, len, &mantisse, &exponent))
-     {
-        if (s[4] == '+')
-          *result = (float)(mantisse << exponent);
-        else
-          *result = (float)mantisse / (float)(1 << exponent);
-
-        return EINA_TRUE;
-     }
-
-   return EINA_FALSE;
-}
-
-static inline Eina_Bool
-_eet_dictionary_string_get_double_cache(const char *s,
-                                        int         len,
-                                        double     *result)
-{
-   int mantisse;
-   int exponent;
-
-   if (_eet_dictionary_string_get_me_cache(s, len, &mantisse, &exponent))
-     {
-        if (s[4] == '+')
-          *result = (double)(mantisse << exponent);
-        else
-          *result = (double)mantisse / (float)(1 << exponent);
-
-        return EINA_TRUE;
-     }
-
-   return EINA_FALSE;
-}
-
-static inline Eina_Bool
-_eet_dictionary_test(const Eet_Dictionary *ed,
-                     int                   idx,
-                     void                 *result)
-{
-   if (!result)
-     return EINA_FALSE;
-
-   if (!ed)
-     return EINA_FALSE;
-
-   if (idx < 0)
-     return EINA_FALSE;
-
-   if (!(idx < ed->count))
-     return EINA_FALSE;
-
-   return EINA_TRUE;
-}
-
-static Eet_Convert *
-eet_dictionary_convert_get(const Eet_Dictionary *ed,
-                           int                   idx,
-                           const char          **str)
-{
-   Eet_Convert *result;
-
-   *str = ed->all[idx].str;
-
-   if (!ed->converts)
-     {
-        ((Eet_Dictionary *)ed)->converts = eina_hash_int32_new(free);
-
-        goto add_convert;
-     }
-
-   result = eina_hash_find(ed->converts, &idx);
-   if (result) return result;
-
-add_convert:
-   result = calloc(1, sizeof (Eet_Convert));
-
-   eina_hash_add(ed->converts, &idx, result);
-   return result;
-}
-
-Eina_Bool
-eet_dictionary_string_get_float(const Eet_Dictionary *ed,
-                                int                   idx,
-                                float                *result)
-{
-   Eet_Convert *convert;
-   const char *str;
-
-   if (!_eet_dictionary_test(ed, idx, result))
-     return EINA_FALSE;
-
-   convert = eet_dictionary_convert_get(ed, idx, &str);
-   if (!convert) return EINA_FALSE;
-
-   if (!(convert->type & EET_D_FLOAT))
-     {
-        if (!_eet_dictionary_string_get_float_cache(str, ed->all[idx].len,
-                                                    &convert->f))
-          {
-             long long mantisse = 0;
-             long exponent = 0;
-
-             if (eina_convert_atod(str, ed->all[idx].len, &mantisse,
-                                   &exponent) == EINA_FALSE)
-               return EINA_FALSE;
-
-             convert->f = ldexpf((float)mantisse, exponent);
-          }
-
-        convert->type |= EET_D_FLOAT;
-     }
-
-   *result = convert->f;
-   return EINA_TRUE;
-}
-
-Eina_Bool
-eet_dictionary_string_get_double(const Eet_Dictionary *ed,
-                                 int                   idx,
-                                 double               *result)
-{
-   Eet_Convert *convert;
-   const char *str;
-
-   if (!_eet_dictionary_test(ed, idx, result))
-     return EINA_FALSE;
-
-   convert = eet_dictionary_convert_get(ed, idx, &str);
-   if (!convert) return EINA_FALSE;
-
-   if (!(convert->type & EET_D_DOUBLE))
-     {
-        if (!_eet_dictionary_string_get_double_cache(str, ed->all[idx].len,
-                                                     &convert->d))
-          {
-             long long mantisse = 0;
-             long exponent = 0;
-
-             if (eina_convert_atod(str, ed->all[idx].len, &mantisse,
-                                   &exponent) == EINA_FALSE)
-               return EINA_FALSE;
-
-             convert->d = ldexp((double)mantisse, exponent);
-          }
-
-        convert->type |= EET_D_DOUBLE;
-     }
-
-   *result = convert->d;
-   return EINA_TRUE;
-}
-
-Eina_Bool
-eet_dictionary_string_get_fp(const Eet_Dictionary *ed,
-                             int                   idx,
-                             Eina_F32p32          *result)
-{
-   Eet_Convert *convert;
-   const char *str;
-
-   if (!_eet_dictionary_test(ed, idx, result))
-     return EINA_FALSE;
-
-   convert = eet_dictionary_convert_get(ed, idx, &str);
-   if (!convert) return EINA_FALSE;
-
-   if (!(convert->type & EET_D_FIXED_POINT))
-     {
-        Eina_F32p32 fp;
-
-        if (!eina_convert_atofp(str, ed->all[idx].len, &fp))
-          return EINA_FALSE;
-
-        convert->fp = fp;
-        convert->type |= EET_D_FIXED_POINT;
-     }
-
-   *result = convert->fp;
-   return EINA_TRUE;
-}
-
-EAPI int
-eet_dictionary_string_check(Eet_Dictionary *ed,
-                            const char     *string)
-{
-   int i;
-
-   if ((!ed) || (!string))
-     return 0;
-
-   if ((ed->start <= string) && (string < ed->end))
-     return 1;
-
-   for (i = 0; i < ed->count; ++i)
-     if ((ed->all[i].allocated) && ed->all[i].str == string)
-       return 1;
-
-   return 0;
-}
-
diff --git a/libraries/eet/src/lib/eet_image.c b/libraries/eet/src/lib/eet_image.c
deleted file mode 100644
index b622236..0000000
--- a/libraries/eet/src/lib/eet_image.c
+++ /dev/null
@@ -1,1825 +0,0 @@
-#ifdef HAVE_CONFIG_H
-# include <config.h>
-#endif /* ifdef HAVE_CONFIG_H */
-
-#ifdef HAVE_ALLOCA_H
-# include <alloca.h>
-#elif defined __GNUC__
-# define alloca __builtin_alloca
-#elif defined _AIX
-# define alloca __alloca
-#elif defined _MSC_VER
-# include <malloc.h>
-# define alloca _alloca
-#else /* ifdef HAVE_ALLOCA_H */
-# include <stddef.h>
-# ifdef  __cplusplus
-extern "C"
-# endif /* ifdef  __cplusplus */
-void *alloca(size_t);
-#endif /* ifdef HAVE_ALLOCA_H */
-
-#ifdef HAVE_NETINET_IN_H
-# ifdef __OpenBSD__
-#  include <sys/types.h>
-# endif /* ifdef __OpenBSD__ */
-# include <netinet/in.h>
-#endif /* ifdef HAVE_NETINET_IN_H */
-
-#ifdef _WIN32
-# include <winsock2.h>
-# define HAVE_BOOLEAN
-#endif /* ifdef _WIN32 */
-
-#include <stdio.h>
-#include <string.h>
-#include <setjmp.h>
-#include <zlib.h>
-#include <jpeglib.h>
-
-#include "Eet.h"
-#include "Eet_private.h"
-
-/*---*/
-
-typedef struct _JPEG_error_mgr *emptr;
-
-/*---*/
-
-struct _JPEG_error_mgr
-{
-   struct jpeg_error_mgr pub;
-   jmp_buf               setjmp_buffer;
-};
-
-struct jpeg_membuf_src
-{
-   struct jpeg_source_mgr  pub;
-
-   const unsigned char    *buf;
-   size_t                  len;
-   struct jpeg_membuf_src *self;
-};
-
-static void
-_eet_jpeg_membuf_src_init(j_decompress_ptr cinfo)
-{
-   /* FIXME: Use attribute unused */
-    (void)cinfo;
-}
-
-static boolean
-_eet_jpeg_membuf_src_fill(j_decompress_ptr cinfo)
-{
-   static const JOCTET jpeg_eoi[2] = { 0xFF, JPEG_EOI };
-   struct jpeg_membuf_src *src = (struct jpeg_membuf_src *)cinfo->src;
-
-   src->pub.bytes_in_buffer = sizeof(jpeg_eoi);
-   src->pub.next_input_byte = jpeg_eoi;
-
-   return TRUE;
-}
-
-static void
-_eet_jpeg_membuf_src_skip(j_decompress_ptr cinfo,
-                          long             num_bytes)
-{
-   struct jpeg_membuf_src *src = (struct jpeg_membuf_src *)cinfo->src;
-
-   src->pub.bytes_in_buffer -= num_bytes;
-   src->pub.next_input_byte += num_bytes;
-}
-
-static void
-_eet_jpeg_membuf_src_term(j_decompress_ptr cinfo)
-{
-   struct jpeg_membuf_src *src = ((struct jpeg_membuf_src *)cinfo->src)->self;
-
-   free(src);
-   cinfo->src = NULL;
-}
-
-static int
-eet_jpeg_membuf_src(j_decompress_ptr cinfo,
-                    const void      *buf,
-                    size_t           len)
-{
-   struct jpeg_membuf_src *src;
-
-   src = calloc(1, sizeof(*src));
-   if (!src)
-     return -1;
-
-   src->self = src;
-
-   cinfo->src = &src->pub;
-   src->buf = buf;
-   src->len = len;
-   src->pub.init_source = _eet_jpeg_membuf_src_init;
-   src->pub.fill_input_buffer = _eet_jpeg_membuf_src_fill;
-   src->pub.skip_input_data = _eet_jpeg_membuf_src_skip;
-   src->pub.resync_to_restart = jpeg_resync_to_restart;
-   src->pub.term_source = _eet_jpeg_membuf_src_term;
-   src->pub.bytes_in_buffer = src->len;
-   src->pub.next_input_byte = src->buf;
-
-   return 0;
-}
-
-struct jpeg_membuf_dst
-{
-   struct jpeg_destination_mgr pub;
-
-   void                      **dst_buf;
-   size_t                     *dst_len;
-
-   unsigned char              *buf;
-   size_t                      len;
-   int                         failed;
-   struct jpeg_membuf_dst     *self;
-};
-
-static void
-_eet_jpeg_membuf_dst_init(j_compress_ptr cinfo)
-{
-   /* FIXME: Use eina attribute */
-    (void)cinfo;
-}
-
-static boolean
-_eet_jpeg_membuf_dst_flush(j_compress_ptr cinfo)
-{
-   struct jpeg_membuf_dst *dst = (struct jpeg_membuf_dst *)cinfo->dest;
-   unsigned char *buf;
-
-   if (dst->len >= 0x40000000 ||
-       !(buf = realloc(dst->buf, dst->len * 2)))
-     {
-        dst->failed = 1;
-        dst->pub.next_output_byte = dst->buf;
-        dst->pub.free_in_buffer = dst->len;
-        return TRUE;
-     }
-
-   dst->pub.next_output_byte =
-     buf + ((unsigned char *)dst->pub.next_output_byte - dst->buf);
-   dst->buf = buf;
-   dst->pub.free_in_buffer += dst->len;
-   dst->len *= 2;
-
-   return FALSE;
-}
-
-static void
-_eet_jpeg_membuf_dst_term(j_compress_ptr cinfo)
-{
-   struct jpeg_membuf_dst *dst = ((struct jpeg_membuf_dst *)cinfo->dest)->self;
-
-   if (dst->failed)
-     {
-        *dst->dst_buf = NULL;
-        *dst->dst_len = 0;
-        free(dst->buf);
-     }
-   else
-     {
-        *dst->dst_buf = dst->buf;
-        *dst->dst_len = (unsigned char *)dst->pub.next_output_byte - dst->buf;
-     }
-
-   free(dst);
-   cinfo->dest = NULL;
-}
-
-static int
-eet_jpeg_membuf_dst(j_compress_ptr cinfo,
-                    void         **buf,
-                    size_t        *len)
-{
-   struct jpeg_membuf_dst *dst;
-
-   dst = calloc(1, sizeof(*dst));
-   if (!dst)
-     return -1;
-
-   dst->buf = malloc(32768);
-   if (!dst->buf)
-     {
-        free(dst);
-        return -1;
-     }
-
-   dst->self = dst;
-   dst->len = 32768;
-
-   cinfo->dest = &dst->pub;
-   dst->pub.init_destination = _eet_jpeg_membuf_dst_init;
-   dst->pub.empty_output_buffer = _eet_jpeg_membuf_dst_flush;
-   dst->pub.term_destination = _eet_jpeg_membuf_dst_term;
-   dst->pub.free_in_buffer = dst->len;
-   dst->pub.next_output_byte = dst->buf;
-   dst->dst_buf = buf;
-   dst->dst_len = len;
-   dst->failed = 0;
-
-   return 0;
-}
-
-/*---*/
-
-static void _JPEGFatalErrorHandler(j_common_ptr cinfo);
-static void _JPEGErrorHandler(j_common_ptr cinfo);
-static void _JPEGErrorHandler2(j_common_ptr cinfo,
-                               int          msg_level);
-
-static int
-eet_data_image_jpeg_header_decode(const void   *data,
-                                  int           size,
-                                  unsigned int *w,
-                                  unsigned int *h);
-static int
-eet_data_image_jpeg_rgb_decode(const void   *data,
-                               int           size,
-                               unsigned int  src_x,
-                               unsigned int  src_y,
-                               unsigned int *d,
-                               unsigned int  w,
-                               unsigned int  h,
-                               unsigned int  row_stride);
-static int
-eet_data_image_jpeg_alpha_decode(const void   *data,
-                                 int           size,
-                                 unsigned int  src_x,
-                                 unsigned int  src_y,
-                                 unsigned int *d,
-                                 unsigned int  w,
-                                 unsigned int  h,
-                                 unsigned int  row_stride);
-static void *
-eet_data_image_lossless_convert(int         *size,
-                                const void  *data,
-                                unsigned int w,
-                                unsigned int h,
-                                int          alpha);
-static void *
-eet_data_image_lossless_compressed_convert(int         *size,
-                                           const void  *data,
-                                           unsigned int w,
-                                           unsigned int h,
-                                           int          alpha,
-                                           int          compression);
-static void *
-eet_data_image_jpeg_convert(int         *size,
-                            const void  *data,
-                            unsigned int w,
-                            unsigned int h,
-                            int          alpha,
-                            int          quality);
-static void *
-eet_data_image_jpeg_alpha_convert(int         *size,
-                                  const void  *data,
-                                  unsigned int w,
-                                  unsigned int h,
-                                  int          alpha,
-                                  int          quality);
-
-/*---*/
-
-static int _eet_image_words_bigendian = -1;
-
-/*---*/
-
-#define SWAP64(x) (x) =                                        \
-  ((((unsigned long long)(x) & 0x00000000000000ffULL) << 56) | \
-   (((unsigned long long)(x) & 0x000000000000ff00ULL) << 40) | \
-   (((unsigned long long)(x) & 0x0000000000ff0000ULL) << 24) | \
-   (((unsigned long long)(x) & 0x00000000ff000000ULL) << 8) |  \
-   (((unsigned long long)(x) & 0x000000ff00000000ULL) >> 8) |  \
-   (((unsigned long long)(x) & 0x0000ff0000000000ULL) >> 24) | \
-   (((unsigned long long)(x) & 0x00ff000000000000ULL) >> 40) | \
-   (((unsigned long long)(x) & 0xff00000000000000ULL) >> 56))
-#define SWAP32(x) (x) =              \
-  ((((int)(x) & 0x000000ff) << 24) | \
-   (((int)(x) & 0x0000ff00) << 8) |  \
-   (((int)(x) & 0x00ff0000) >> 8) |  \
-   (((int)(x) & 0xff000000) >> 24))
-#define SWAP16(x) (x) =           \
-  ((((short)(x) & 0x00ff) << 8) | \
-   (((short)(x) & 0xff00) >> 8))
-
-#ifdef CONV8
-# undef CONV8
-#endif /* ifdef CONV8 */
-#ifdef CONV16
-# undef CONV16
-#endif /* ifdef CONV16 */
-#ifdef CONV32
-# undef CONV32
-#endif /* ifdef CONV32 */
-#ifdef CONV64
-# undef CONV64
-#endif /* ifdef CONV64 */
-
-#define CONV8(x)
-#define CONV16(x) {if (_eet_image_words_bigendian) {SWAP16(x); }}
-#define CONV32(x) {if (_eet_image_words_bigendian) {SWAP32(x); }}
-#define CONV64(x) {if (_eet_image_words_bigendian) {SWAP64(x); }}
-
-/*---*/
-
-static void
-_JPEGFatalErrorHandler(j_common_ptr cinfo)
-{
-   emptr errmgr;
-
-   errmgr = (emptr)cinfo->err;
-   /*   cinfo->err->output_message(cinfo);*/
-   longjmp(errmgr->setjmp_buffer, 1);
-   return;
-}
-
-static void
-_JPEGErrorHandler(j_common_ptr cinfo __UNUSED__)
-{
-   /*   emptr errmgr; */
-
-    /*   errmgr = (emptr) cinfo->err; */
-    /*   cinfo->err->output_message(cinfo);*/
-    /*   longjmp(errmgr->setjmp_buffer, 1);*/
-       return;
-}
-
-static void
-_JPEGErrorHandler2(j_common_ptr cinfo __UNUSED__,
-                   int          msg_level __UNUSED__)
-{
-   /*   emptr errmgr; */
-
-    /*   errmgr = (emptr) cinfo->err; */
-    /*   cinfo->err->output_message(cinfo);*/
-    /*   longjmp(errmgr->setjmp_buffer, 1);*/
-       return;
-}
-
-static int
-eet_data_image_jpeg_header_decode(const void   *data,
-                                  int           size,
-                                  unsigned int *w,
-                                  unsigned int *h)
-{
-   struct jpeg_decompress_struct cinfo;
-   struct _JPEG_error_mgr jerr;
-
-   memset(&cinfo, 0, sizeof (struct jpeg_decompress_struct));
-
-   cinfo.err = jpeg_std_error(&(jerr.pub));
-   jerr.pub.error_exit = _JPEGFatalErrorHandler;
-   jerr.pub.emit_message = _JPEGErrorHandler2;
-   jerr.pub.output_message = _JPEGErrorHandler;
-   if (setjmp(jerr.setjmp_buffer))
-     return 0;
-
-   jpeg_create_decompress(&cinfo);
-
-   if (eet_jpeg_membuf_src(&cinfo, data, (size_t)size))
-     {
-        jpeg_destroy_decompress(&cinfo);
-        return 0;
-     }
-
-   jpeg_read_header(&cinfo, TRUE);
-   cinfo.do_fancy_upsampling = FALSE;
-   cinfo.do_block_smoothing = FALSE;
-   jpeg_start_decompress(&cinfo);
-
-   /* head decoding */
-   *w = cinfo.output_width;
-   *h = cinfo.output_height;
-
-   free(cinfo.src);
-   cinfo.src = NULL;
-
-   jpeg_destroy_decompress(&cinfo);
-
-   if ((*w < 1) || (*h < 1) || (*w > 8192) || (*h > 8192))
-     return 0;
-
-   return 1;
-}
-
-static int
-eet_data_image_jpeg_rgb_decode(const void   *data,
-                               int           size,
-                               unsigned int  src_x,
-                               unsigned int  src_y,
-                               unsigned int *d,
-                               unsigned int  w,
-                               unsigned int  h,
-                               unsigned int  row_stride)
-{
-   struct jpeg_decompress_struct cinfo;
-   struct _JPEG_error_mgr jerr;
-   unsigned char *ptr, *line[16], *tdata = NULL;
-   unsigned int *ptr2, *tmp;
-   unsigned int iw, ih;
-   unsigned int x, y, l, scans;
-   unsigned int i;
-
-   /* FIXME: handle src_x, src_y and row_stride correctly */
-   if (!d)
-     return 0;
-
-   memset(&cinfo, 0, sizeof (struct jpeg_decompress_struct));
-
-   cinfo.err = jpeg_std_error(&(jerr.pub));
-   jerr.pub.error_exit = _JPEGFatalErrorHandler;
-   jerr.pub.emit_message = _JPEGErrorHandler2;
-   jerr.pub.output_message = _JPEGErrorHandler;
-   if (setjmp(jerr.setjmp_buffer))
-     return 0;
-
-   jpeg_create_decompress(&cinfo);
-
-   if (eet_jpeg_membuf_src(&cinfo, data, (size_t)size))
-     {
-        jpeg_destroy_decompress(&cinfo);
-        return 0;
-     }
-
-   jpeg_read_header(&cinfo, TRUE);
-   cinfo.dct_method = JDCT_ISLOW; // JDCT_FLOAT JDCT_IFAST(quality loss)
-   cinfo.do_fancy_upsampling = FALSE;
-   cinfo.do_block_smoothing = FALSE;
-   jpeg_start_decompress(&cinfo);
-
-   /* head decoding */
-   iw = cinfo.output_width;
-   ih = cinfo.output_height;
-   if ((iw != w) || (ih != h))
-     {
-        free(cinfo.src);
-        cinfo.src = NULL;
-
-        jpeg_destroy_decompress(&cinfo);
-        return 0;
-     }
-
-   /* end head decoding */
-   /* data decoding */
-   if (cinfo.rec_outbuf_height > 16)
-     {
-        free(cinfo.src);
-        cinfo.src = NULL;
-
-        jpeg_destroy_decompress(&cinfo);
-        return 0;
-     }
-
-   tdata = alloca((iw) * 16 * 3);
-   ptr2 = d;
-
-   if (cinfo.output_components == 3)
-     {
-        for (i = 0; i < (unsigned int)cinfo.rec_outbuf_height; i++)
-          line[i] = tdata + (i * (iw) * 3);
-        for (l = 0; l < ih; l += cinfo.rec_outbuf_height)
-          {
-             jpeg_read_scanlines(&cinfo, line, cinfo.rec_outbuf_height);
-             scans = cinfo.rec_outbuf_height;
-             if ((ih - l) < scans)
-               scans = ih - l;
-
-             ptr = tdata;
-
-             if (l + scans >= src_y && l < src_y + h)
-               {
-                  y = src_y - l;
-                  if (src_y < l)
-                    y = 0;
-
-                  for (ptr += 3 * iw * y; y < scans && (y + l) < (src_y + h);
-                       y++)
-                    {
-                       tmp = ptr2;
-                       ptr += 3 * src_x;
-                       for (x = 0; x < w; x++)
-                         {
-                            *ptr2 =
-                              (0xff000000) |
-                              ((ptr[0]) << 16) | ((ptr[1]) << 8) | (ptr[2]);
-                            ptr += 3;
-                            ptr2++;
-                         }
-                       ptr += 3 * (iw - w);
-                       ptr2 = tmp + row_stride / 4;
-                    }
-               }
-          }
-     }
-   else if (cinfo.output_components == 1)
-     {
-        for (i = 0; i < (unsigned int)cinfo.rec_outbuf_height; i++)
-          line[i] = tdata + (i * (iw));
-        for (l = 0; l < (ih); l += cinfo.rec_outbuf_height)
-          {
-             jpeg_read_scanlines(&cinfo, line, cinfo.rec_outbuf_height);
-             scans = cinfo.rec_outbuf_height;
-             if (((ih) - l) < scans)
-               scans = (ih) - l;
-
-             ptr = tdata;
-
-             if (l >= src_y && l < src_y + h)
-               {
-                  y = src_y - l;
-                  if (src_y < l)
-                    y = 0;
-
-                  for (ptr += iw * y; y < scans && (y + l) < (src_y + h); y++)
-                    {
-                       tmp = ptr2;
-                       ptr += src_x;
-                       for (x = 0; x < w; x++)
-                         {
-                            *ptr2 =
-                              (0xff000000) |
-                              ((ptr[0]) << 16) | ((ptr[0]) << 8) | (ptr[0]);
-                            ptr++;
-                            ptr2++;
-                         }
-                       ptr += iw - w;
-                       ptr2 = tmp + row_stride / 4;
-                    }
-               }
-          }
-     }
-
-   /* end data decoding */
-   jpeg_finish_decompress(&cinfo);
-   jpeg_destroy_decompress(&cinfo);
-   return 1;
-}
-
-static int
-eet_data_image_jpeg_alpha_decode(const void   *data,
-                                 int           size,
-                                 unsigned int  src_x,
-                                 unsigned int  src_y,
-                                 unsigned int *d,
-                                 unsigned int  w,
-                                 unsigned int  h,
-                                 unsigned int  row_stride)
-{
-   struct jpeg_decompress_struct cinfo;
-   struct _JPEG_error_mgr jerr;
-   unsigned char *ptr, *line[16], *tdata = NULL;
-   unsigned int *ptr2, *tmp;
-   unsigned int x, y, l, scans;
-   unsigned int i, iw;
-
-   /* FIXME: handle src_x, src_y and row_stride correctly */
-   if (!d)
-     return 0;
-
-   memset(&cinfo, 0, sizeof (struct jpeg_decompress_struct));
-
-   cinfo.err = jpeg_std_error(&(jerr.pub));
-   jerr.pub.error_exit = _JPEGFatalErrorHandler;
-   jerr.pub.emit_message = _JPEGErrorHandler2;
-   jerr.pub.output_message = _JPEGErrorHandler;
-   if (setjmp(jerr.setjmp_buffer))
-     return 0;
-
-   jpeg_create_decompress(&cinfo);
-
-   if (eet_jpeg_membuf_src(&cinfo, data, (size_t)size))
-     {
-        jpeg_destroy_decompress(&cinfo);
-        return 0;
-     }
-
-   jpeg_read_header(&cinfo, TRUE);
-   cinfo.dct_method = JDCT_ISLOW; // JDCT_FLOAT JDCT_IFAST(quality loss)
-   cinfo.do_fancy_upsampling = FALSE;
-   cinfo.do_block_smoothing = FALSE;
-   jpeg_start_decompress(&cinfo);
-
-   /* head decoding */
-   iw = cinfo.output_width;
-   if (w != cinfo.output_width
-       || h != cinfo.output_height)
-     {
-        free(cinfo.src);
-        cinfo.src = NULL;
-
-        jpeg_destroy_decompress(&cinfo);
-        return 0;
-     }
-
-   /* end head decoding */
-   /* data decoding */
-   if (cinfo.rec_outbuf_height > 16)
-     {
-        free(cinfo.src);
-        cinfo.src = NULL;
-
-        jpeg_destroy_decompress(&cinfo);
-        return 0;
-     }
-
-   tdata = alloca(w * 16 * 3);
-   ptr2 = d;
-
-   if (cinfo.output_components == 1)
-     {
-        for (i = 0; i < (unsigned int)cinfo.rec_outbuf_height; i++)
-          line[i] = tdata + (i * w);
-        for (l = 0; l < h; l += cinfo.rec_outbuf_height)
-          {
-             jpeg_read_scanlines(&cinfo, line, cinfo.rec_outbuf_height);
-             scans = cinfo.rec_outbuf_height;
-             if ((h - l) < scans)
-               scans = h - l;
-
-             ptr = tdata;
-
-             if (l >= src_y && l < src_y + h)
-               {
-                  y = src_y - l;
-                  if (src_y < l)
-                    y = 0;
-
-                  for (ptr += iw * y; y < scans && (y + l) < (src_y + h); y++)
-                    {
-                       tmp = ptr2;
-                       ptr += src_x;
-                       for (x = 0; x < w; x++)
-                         {
-                            *ptr2 =
-                              ((*ptr2) & 0x00ffffff) |
-                              ((ptr[0]) << 24);
-                            ptr++;
-                            ptr2++;
-                         }
-                       ptr += iw - w;
-                       ptr2 = tmp + row_stride / 4;
-                    }
-               }
-          }
-     }
-
-   /* end data decoding */
-   jpeg_finish_decompress(&cinfo);
-   jpeg_destroy_decompress(&cinfo);
-   return 1;
-}
-
-static void *
-eet_data_image_lossless_convert(int         *size,
-                                const void  *data,
-                                unsigned int w,
-                                unsigned int h,
-                                int          alpha)
-{
-   if (_eet_image_words_bigendian == -1)
-     {
-        unsigned long int v;
-
-        v = htonl(0x12345678);
-        if (v == 0x12345678)
-          _eet_image_words_bigendian = 1;
-        else
-          _eet_image_words_bigendian = 0;
-     }
-
-   {
-      unsigned char *d;
-      int *header;
-
-      d = malloc((w * h * 4) + (8 * 4));
-      if (!d)
-        return NULL;
-
-      header = (int *)d;
-      memset(d, 0, 32);
-
-      header[0] = 0xac1dfeed;
-      header[1] = w;
-      header[2] = h;
-      header[3] = alpha;
-
-      memcpy(d + 32, data, w * h * 4);
-
-      if (_eet_image_words_bigendian)
-        {
-           unsigned int i;
-
-           for (i = 0; i < ((w * h) + 8); i++) SWAP32(header[i]);
-        }
-
-      *size = ((w * h * 4) + (8 * 4));
-      return d;
-   }
-}
-
-static void *
-eet_data_image_lossless_compressed_convert(int         *size,
-                                           const void  *data,
-                                           unsigned int w,
-                                           unsigned int h,
-                                           int          alpha,
-                                           int          compression)
-{
-   if (_eet_image_words_bigendian == -1)
-     {
-        unsigned long int v;
-
-        v = htonl(0x12345678);
-        if (v == 0x12345678)
-          _eet_image_words_bigendian = 1;
-        else
-          _eet_image_words_bigendian = 0;
-     }
-
-   {
-      unsigned char *d;
-      unsigned char *comp;
-      int *header;
-      int ret;
-      uLongf buflen;
-
-      d = malloc((w * h * 4) + (8 * 4));
-      if (!d)
-        return NULL;
-
-      buflen = (((w * h * 101) / 100) + 3) * 4;
-      comp = malloc(buflen);
-      if (!comp)
-        {
-           free(d);
-           return NULL;
-        }
-
-      header = (int *)d;
-      memset(d, 0, 32);
-
-      header[0] = 0xac1dfeed;
-      header[1] = w;
-      header[2] = h;
-      header[3] = alpha;
-      header[4] = compression;
-      memcpy(d + 32, data, w * h * 4);
-
-      if (_eet_image_words_bigendian)
-        {
-           unsigned int i;
-
-           for (i = 0; i < ((w * h) + 8); i++) SWAP32(header[i]);
-        }
-
-      ret = compress2((Bytef *)comp, &buflen,
-                      (Bytef *)(d + 32),
-                      (uLong)(w * h * 4),
-                      compression);
-      if (ret != Z_OK || buflen > (w * h * 4))
-        {
-           free(comp);
-           free(d);
-           *size = -1;
-           return NULL;
-        }
-
-      memcpy(d + 32, comp, buflen);
-      *size = (8 * 4) + buflen;
-      free(comp);
-      return d;
-   }
-}
-
-static void *
-eet_data_image_jpeg_convert(int         *size,
-                            const void  *data,
-                            unsigned int w,
-                            unsigned int h,
-                            int          alpha,
-                            int          quality)
-{
-   struct jpeg_compress_struct cinfo;
-   struct _JPEG_error_mgr jerr;
-   const int *ptr;
-   void *d = NULL;
-   size_t sz = 0;
-   JSAMPROW *jbuf;
-   unsigned char *buf;
-
-   (void)alpha; /* unused */
-
-   buf = alloca(3 * w);
-
-   memset(&cinfo, 0, sizeof (struct jpeg_compress_struct));
-
-   cinfo.err = jpeg_std_error(&(jerr.pub));
-   jerr.pub.error_exit = _JPEGFatalErrorHandler;
-   jerr.pub.emit_message = _JPEGErrorHandler2;
-   jerr.pub.output_message = _JPEGErrorHandler;
-   if (setjmp(jerr.setjmp_buffer))
-     return NULL;
-
-   jpeg_create_compress(&cinfo);
-
-   if (eet_jpeg_membuf_dst(&cinfo, &d, &sz))
-     {
-        jpeg_destroy_compress(&cinfo);
-        return NULL;
-     }
-
-   cinfo.image_width = w;
-   cinfo.image_height = h;
-   cinfo.input_components = 3;
-   cinfo.in_color_space = JCS_RGB;
-   cinfo.optimize_coding = FALSE;
-   cinfo.dct_method = JDCT_ISLOW; // JDCT_FLOAT JDCT_IFAST(quality loss)
-   if (quality < 60) cinfo.dct_method = JDCT_IFAST;
-   jpeg_set_defaults(&cinfo);
-   jpeg_set_quality(&cinfo, quality, TRUE);
-
-   if (quality >= 90)
-     {
-        cinfo.comp_info[0].h_samp_factor = 1;
-        cinfo.comp_info[0].v_samp_factor = 1;
-        cinfo.comp_info[1].h_samp_factor = 1;
-        cinfo.comp_info[1].v_samp_factor = 1;
-        cinfo.comp_info[2].h_samp_factor = 1;
-        cinfo.comp_info[2].v_samp_factor = 1;
-     }
-
-   jpeg_start_compress(&cinfo, TRUE);
-
-   while (cinfo.next_scanline < cinfo.image_height)
-     {
-        unsigned int i, j;
-
-        /* convert scaline from ARGB to RGB packed */
-        ptr = ((const int *)data) + cinfo.next_scanline * w;
-        for (j = 0, i = 0; i < w; i++)
-          {
-             buf[j++] = ((*ptr) >> 16) & 0xff;
-             buf[j++] = ((*ptr) >> 8) & 0xff;
-             buf[j++] = ((*ptr)) & 0xff;
-             ptr++;
-          }
-        jbuf = (JSAMPROW *)(&buf);
-        jpeg_write_scanlines(&cinfo, jbuf, 1);
-     }
-
-   jpeg_finish_compress(&cinfo);
-   jpeg_destroy_compress(&cinfo);
-
-   *size = sz;
-   return d;
-}
-
-static void *
-eet_data_image_jpeg_alpha_convert(int         *size,
-                                  const void  *data,
-                                  unsigned int w,
-                                  unsigned int h,
-                                  int          alpha,
-                                  int          quality)
-{
-   unsigned char *d1, *d2;
-   unsigned char *d;
-   int *header;
-   int sz1, sz2;
-
-   (void)alpha; /* unused */
-
-   if (_eet_image_words_bigendian == -1)
-     {
-        unsigned long int v;
-
-        v = htonl(0x12345678);
-        if (v == 0x12345678)
-          _eet_image_words_bigendian = 1;
-        else
-          _eet_image_words_bigendian = 0;
-     }
-
-   {
-      const int *ptr;
-      void *dst = NULL;
-      size_t sz = 0;
-      struct _JPEG_error_mgr jerr;
-      JSAMPROW *jbuf;
-      struct jpeg_compress_struct cinfo;
-      unsigned char *buf;
-
-      buf = alloca(3 * w);
-
-      cinfo.err = jpeg_std_error(&(jerr.pub));
-      jerr.pub.error_exit = _JPEGFatalErrorHandler;
-      jerr.pub.emit_message = _JPEGErrorHandler2;
-      jerr.pub.output_message = _JPEGErrorHandler;
-      if (setjmp(jerr.setjmp_buffer))
-        return NULL;
-
-      jpeg_create_compress(&cinfo);
-      if (eet_jpeg_membuf_dst(&cinfo, &dst, &sz))
-        {
-           jpeg_destroy_compress(&cinfo);
-           return NULL;
-        }
-
-      cinfo.image_width = w;
-      cinfo.image_height = h;
-      cinfo.input_components = 3;
-      cinfo.in_color_space = JCS_RGB;
-      cinfo.optimize_coding = FALSE;
-      cinfo.dct_method = JDCT_ISLOW; // JDCT_FLOAT JDCT_IFAST(quality loss)
-      if (quality < 60) cinfo.dct_method = JDCT_IFAST;
-      jpeg_set_defaults(&cinfo);
-      jpeg_set_quality(&cinfo, quality, TRUE);
-      if (quality >= 90)
-        {
-           cinfo.comp_info[0].h_samp_factor = 1;
-           cinfo.comp_info[0].v_samp_factor = 1;
-           cinfo.comp_info[1].h_samp_factor = 1;
-           cinfo.comp_info[1].v_samp_factor = 1;
-           cinfo.comp_info[2].h_samp_factor = 1;
-           cinfo.comp_info[2].v_samp_factor = 1;
-        }
-
-      jpeg_start_compress(&cinfo, TRUE);
-
-      while (cinfo.next_scanline < cinfo.image_height)
-        {
-           unsigned int i, j;
-
-           ptr = ((const int *)data) + cinfo.next_scanline * w;
-           /* convert scaline from ARGB to RGB packed */
-           for (j = 0, i = 0; i < w; i++)
-             {
-                buf[j++] = ((*ptr) >> 16) & 0xff;
-                buf[j++] = ((*ptr) >> 8) & 0xff;
-                buf[j++] = ((*ptr)) & 0xff;
-                ptr++;
-             }
-           jbuf = (JSAMPROW *)(&buf);
-           jpeg_write_scanlines(&cinfo, jbuf, 1);
-        }
-
-      jpeg_finish_compress(&cinfo);
-      jpeg_destroy_compress(&cinfo);
-
-      d1 = dst;
-      sz1 = sz;
-   }
-   {
-      const int *ptr;
-      void *dst = NULL;
-      size_t sz = 0;
-      struct _JPEG_error_mgr jerr;
-      JSAMPROW *jbuf;
-      struct jpeg_compress_struct cinfo;
-      unsigned char *buf;
-
-      buf = alloca(3 * w);
-
-      cinfo.err = jpeg_std_error(&(jerr.pub));
-      jerr.pub.error_exit = _JPEGFatalErrorHandler;
-      jerr.pub.emit_message = _JPEGErrorHandler2;
-      jerr.pub.output_message = _JPEGErrorHandler;
-      if (setjmp(jerr.setjmp_buffer))
-        {
-           free(d1);
-           return NULL;
-        }
-
-      jpeg_create_compress(&cinfo);
-      if (eet_jpeg_membuf_dst(&cinfo, &dst, &sz))
-        {
-           jpeg_destroy_compress(&cinfo);
-           free(d1);
-           return NULL;
-        }
-
-      cinfo.image_width = w;
-      cinfo.image_height = h;
-      cinfo.input_components = 1;
-      cinfo.in_color_space = JCS_GRAYSCALE;
-      jpeg_set_defaults(&cinfo);
-      jpeg_set_quality(&cinfo, quality, TRUE);
-      if (quality >= 90)
-        {
-           cinfo.comp_info[0].h_samp_factor = 1;
-           cinfo.comp_info[0].v_samp_factor = 1;
-           cinfo.comp_info[1].h_samp_factor = 1;
-           cinfo.comp_info[1].v_samp_factor = 1;
-           cinfo.comp_info[2].h_samp_factor = 1;
-           cinfo.comp_info[2].v_samp_factor = 1;
-        }
-
-      jpeg_start_compress(&cinfo, TRUE);
-
-      while (cinfo.next_scanline < cinfo.image_height)
-        {
-           unsigned int i, j;
-
-           ptr = ((const int *)data) + cinfo.next_scanline * w;
-           /* convert scaline from ARGB to RGB packed */
-           for (j = 0, i = 0; i < w; i++)
-             {
-                buf[j++] = ((*ptr) >> 24) & 0xff;
-                ptr++;
-             }
-           jbuf = (JSAMPROW *)(&buf);
-           jpeg_write_scanlines(&cinfo, jbuf, 1);
-        }
-
-      jpeg_finish_compress(&cinfo);
-      jpeg_destroy_compress(&cinfo);
-
-      d2 = dst;
-      sz2 = sz;
-   }
-   d = malloc(12 + sz1 + sz2);
-   if (!d)
-     {
-        free(d1);
-        free(d2);
-        return NULL;
-     }
-
-   header = (int *)d;
-   header[0] = 0xbeeff00d;
-   header[1] = sz1;
-   header[2] = sz2;
-   if (_eet_image_words_bigendian)
-     {
-        int i;
-
-        for (i = 0; i < 3; i++) SWAP32(header[i]);
-     }
-
-   memcpy(d + 12, d1, sz1);
-   memcpy(d + 12 + sz1, d2, sz2);
-
-   free(d1);
-   free(d2);
-   *size = 12 + sz1 + sz2;
-   return d;
-}
-
-EAPI int
-eet_data_image_write_cipher(Eet_File    *ef,
-                            const char  *name,
-                            const char  *cipher_key,
-                            const void  *data,
-                            unsigned int w,
-                            unsigned int h,
-                            int          alpha,
-                            int          comp,
-                            int          quality,
-                            int          lossy)
-{
-   void *d = NULL;
-   int size = 0;
-
-   d = eet_data_image_encode(data, &size, w, h, alpha, comp, quality, lossy);
-   if (d)
-     {
-        int v;
-
-        v = eet_write_cipher(ef, name, d, size, 0, cipher_key);
-        free(d);
-        return v;
-     }
-
-   return 0;
-}
-
-EAPI int
-eet_data_image_write(Eet_File    *ef,
-                     const char  *name,
-                     const void  *data,
-                     unsigned int w,
-                     unsigned int h,
-                     int          alpha,
-                     int          comp,
-                     int          quality,
-                     int          lossy)
-{
-   return eet_data_image_write_cipher(ef,
-                                      name,
-                                      NULL,
-                                      data,
-                                      w,
-                                      h,
-                                      alpha,
-                                      comp,
-                                      quality,
-                                      lossy);
-}
-
-EAPI void *
-eet_data_image_read_cipher(Eet_File     *ef,
-                           const char   *name,
-                           const char   *cipher_key,
-                           unsigned int *w,
-                           unsigned int *h,
-                           int          *alpha,
-                           int          *comp,
-                           int          *quality,
-                           int          *lossy)
-{
-   unsigned int *d = NULL;
-   void *data = NULL;
-   int free_data = 0;
-   int size;
-
-   if (!cipher_key)
-     data = (void *)eet_read_direct(ef, name, &size);
-
-   if (!data)
-     {
-        data = eet_read_cipher(ef, name, &size, cipher_key);
-        free_data = 1;
-        if (!data)
-          return NULL;
-     }
-
-   d = eet_data_image_decode(data, size, w, h, alpha, comp, quality, lossy);
-
-   if (free_data)
-     free(data);
-
-   return d;
-}
-
-EAPI void *
-eet_data_image_read(Eet_File     *ef,
-                    const char   *name,
-                    unsigned int *w,
-                    unsigned int *h,
-                    int          *alpha,
-                    int          *comp,
-                    int          *quality,
-                    int          *lossy)
-{
-   return eet_data_image_read_cipher(ef, name, NULL, w, h, alpha,
-                                     comp, quality, lossy);
-}
-
-EAPI int
-eet_data_image_read_to_surface_cipher(Eet_File     *ef,
-                                      const char   *name,
-                                      const char   *cipher_key,
-                                      unsigned int  src_x,
-                                      unsigned int  src_y,
-                                      unsigned int *d,
-                                      unsigned int  w,
-                                      unsigned int  h,
-                                      unsigned int  row_stride,
-                                      int          *alpha,
-                                      int          *comp,
-                                      int          *quality,
-                                      int          *lossy)
-{
-   void *data = NULL;
-   int free_data = 0;
-   int res = 1;
-   int size;
-
-   if (!cipher_key)
-     data = (void *)eet_read_direct(ef, name, &size);
-
-   if (!data)
-     {
-        data = eet_read_cipher(ef, name, &size, cipher_key);
-        free_data = 1;
-        if (!data)
-          return 0;
-     }
-
-   res = eet_data_image_decode_to_surface(data, size, src_x, src_y, d,
-                                          w, h, row_stride, alpha,
-                                          comp, quality, lossy);
-
-   if (free_data)
-     free(data);
-
-   return res;
-}
-
-EAPI int
-eet_data_image_read_to_surface(Eet_File     *ef,
-                               const char   *name,
-                               unsigned int  src_x,
-                               unsigned int  src_y,
-                               unsigned int *d,
-                               unsigned int  w,
-                               unsigned int  h,
-                               unsigned int  row_stride,
-                               int          *alpha,
-                               int          *comp,
-                               int          *quality,
-                               int          *lossy)
-{
-   return eet_data_image_read_to_surface_cipher(ef, name, NULL,
-                                                src_x, src_y, d,
-                                                w, h, row_stride,
-                                                alpha, comp, quality,
-                                                lossy);
-}
-
-EAPI int
-eet_data_image_header_read_cipher(Eet_File     *ef,
-                                  const char   *name,
-                                  const char   *cipher_key,
-                                  unsigned int *w,
-                                  unsigned int *h,
-                                  int          *alpha,
-                                  int          *comp,
-                                  int          *quality,
-                                  int          *lossy)
-{
-   void *data = NULL;
-   int size = 0;
-   int free_data = 0;
-   int d;
-
-   if (!cipher_key)
-     data = (void *)eet_read_direct(ef, name, &size);
-
-   if (!data)
-     {
-        data = eet_read_cipher(ef, name, &size, cipher_key);
-        free_data = 1;
-        if (!data)
-          return 0;
-     }
-
-   d = eet_data_image_header_decode(data, size, w, h, alpha,
-                                    comp, quality, lossy);
-   if (free_data)
-     free(data);
-
-   return d;
-}
-
-EAPI int
-eet_data_image_header_read(Eet_File     *ef,
-                           const char   *name,
-                           unsigned int *w,
-                           unsigned int *h,
-                           int          *alpha,
-                           int          *comp,
-                           int          *quality,
-                           int          *lossy)
-{
-   return eet_data_image_header_read_cipher(ef, name, NULL,
-                                            w, h, alpha,
-                                            comp, quality, lossy);
-}
-
-EAPI void *
-eet_data_image_encode_cipher(const void  *data,
-                             const char  *cipher_key,
-                             unsigned int w,
-                             unsigned int h,
-                             int          alpha,
-                             int          comp,
-                             int          quality,
-                             int          lossy,
-                             int         *size_ret)
-{
-   void *d = NULL;
-   void *ciphered_d = NULL;
-   unsigned int ciphered_sz = 0;
-   int size = 0;
-
-   if (lossy == 0)
-     {
-        if (comp > 0)
-          d = eet_data_image_lossless_compressed_convert(&size, data,
-                                                         w, h, alpha, comp);
-
-        /* eet_data_image_lossless_compressed_convert will refuse to compress something
-           if the result is bigger than the entry. */
-        if (comp <= 0 || !d)
-          d = eet_data_image_lossless_convert(&size, data, w, h, alpha);
-     }
-   else
-     {
-        if (!alpha)
-          d = eet_data_image_jpeg_convert(&size, data, w, h, alpha, quality);
-        else
-          d = eet_data_image_jpeg_alpha_convert(&size, data,
-                                                w, h, alpha, quality);
-     }
-
-   if (cipher_key)
-     {
-        if(!eet_cipher(d, size, cipher_key, strlen(cipher_key), &ciphered_d,
-                       &ciphered_sz))
-          {
-             if (d)
-               free(d);
-
-             d = ciphered_d;
-             size = ciphered_sz;
-          }
-        else
-        if (ciphered_d)
-          free(ciphered_d);
-     }
-
-   if (size_ret)
-     *size_ret = size;
-
-   return d;
-}
-
-EAPI void *
-eet_data_image_encode(const void  *data,
-                      int         *size_ret,
-                      unsigned int w,
-                      unsigned int h,
-                      int          alpha,
-                      int          comp,
-                      int          quality,
-                      int          lossy)
-{
-   return eet_data_image_encode_cipher(data, NULL, w, h, alpha,
-                                       comp, quality, lossy, size_ret);
-}
-
-EAPI int
-eet_data_image_header_decode_cipher(const void   *data,
-                                    const char   *cipher_key,
-                                    int           size,
-                                    unsigned int *w,
-                                    unsigned int *h,
-                                    int          *alpha,
-                                    int          *comp,
-                                    int          *quality,
-                                    int          *lossy)
-{
-   int header[8];
-   void *deciphered_d = NULL;
-   unsigned int deciphered_sz = 0;
-
-   if (cipher_key)
-     {
-        if (!eet_decipher(data, size, cipher_key, strlen(cipher_key),
-                          &deciphered_d, &deciphered_sz))
-          {
-             data = deciphered_d;
-             size = deciphered_sz;
-          }
-        else
-        if (deciphered_d)
-          free(deciphered_d);
-     }
-
-   if (_eet_image_words_bigendian == -1)
-     {
-        unsigned long int v;
-
-        v = htonl(0x12345678);
-        if (v == 0x12345678)
-          _eet_image_words_bigendian = 1;
-        else
-          _eet_image_words_bigendian = 0;
-     }
-
-   if (size < 32)
-     return 0;
-
-   memcpy(header, data, 32);
-   if (_eet_image_words_bigendian)
-     {
-        int i;
-
-        for (i = 0; i < 8; i++) SWAP32(header[i]);
-     }
-
-   if ((unsigned)header[0] == 0xac1dfeed)
-     {
-        int iw, ih, al, cp;
-
-        iw = header[1];
-        ih = header[2];
-        al = header[3];
-        cp = header[4];
-        if ((iw < 1) || (ih < 1) || (iw > 8192) || (ih > 8192))
-          return 0;
-
-        if ((cp == 0) && (size < ((iw * ih * 4) + 32)))
-          return 0;
-
-        if (w)
-          *w = iw;
-
-        if (h)
-          *h = ih;
-
-        if (alpha)
-          *alpha = al ? 1 : 0;
-
-        if (comp)
-          *comp = cp;
-
-        if (lossy)
-          *lossy = 0;
-
-        if (quality)
-          *quality = 100;
-
-        return 1;
-     }
-   else if ((unsigned)header[0] == 0xbeeff00d)
-     {
-        unsigned int iw = 0, ih = 0;
-        unsigned const char *dt;
-        int sz1;
-        int ok;
-
-        sz1 = header[1];
-/*  sz2 = header[2]; */
-        dt = data;
-        dt += 12;
-        ok = eet_data_image_jpeg_header_decode(dt, sz1, &iw, &ih);
-        if (ok)
-          {
-             if (w)
-               *w = iw;
-
-             if (h)
-               *h = ih;
-
-             if (alpha)
-               *alpha = 1;
-
-             if (comp)
-               *comp = 0;
-
-             if (lossy)
-               *lossy = 1;
-
-             if (quality)
-               *quality = 75;
-
-             return 1;
-          }
-     }
-   else
-     {
-        unsigned int iw = 0, ih = 0;
-        int ok;
-
-        ok = eet_data_image_jpeg_header_decode(data, size, &iw, &ih);
-        if (ok)
-          {
-             if (w)
-               *w = iw;
-
-             if (h)
-               *h = ih;
-
-             if (alpha)
-               *alpha = 0;
-
-             if (comp)
-               *comp = 0;
-
-             if (lossy)
-               *lossy = 1;
-
-             if (quality)
-               *quality = 75;
-
-             return 1;
-          }
-     }
-
-   return 0;
-}
-
-EAPI int
-eet_data_image_header_decode(const void   *data,
-                             int           size,
-                             unsigned int *w,
-                             unsigned int *h,
-                             int          *alpha,
-                             int          *comp,
-                             int          *quality,
-                             int          *lossy)
-{
-   return eet_data_image_header_decode_cipher(data,
-                                              NULL,
-                                              size,
-                                              w,
-                                              h,
-                                              alpha,
-                                              comp,
-                                              quality,
-                                              lossy);
-}
-
-static void
-_eet_data_image_copy_buffer(const unsigned int *src,
-                            unsigned int        src_x,
-                            unsigned int        src_y,
-                            unsigned int        src_w,
-                            unsigned int       *dst,
-                            unsigned int        w,
-                            unsigned int        h,
-                            unsigned int        row_stride)
-{
-   src += src_x + src_y * src_w;
-
-   if (row_stride == src_w * 4 && w == src_w)
-     memcpy(dst, src, row_stride * h);
-   else
-     {
-        unsigned int *over = dst;
-        unsigned int y;
-
-        for (y = 0; y < h; ++y, src += src_w, over += row_stride)
-          memcpy(over, src, w * 4);
-     }
-}
-
-static int
-_eet_data_image_decode_inside(const void   *data,
-                              int           size,
-                              unsigned int  src_x,
-                              unsigned int  src_y,
-                              unsigned int  src_w,
-                              unsigned int  src_h,
-                              unsigned int *d,
-                              unsigned int  w,
-                              unsigned int  h,
-                              unsigned int  row_stride,
-                              int           alpha,
-                              int           comp,
-                              int           quality,
-                              int           lossy)
-{
-   if (lossy == 0 && quality == 100)
-     {
-        unsigned int *body;
-
-        body = ((unsigned int *)data) + 8;
-        if (!comp)
-          _eet_data_image_copy_buffer(body, src_x, src_y, src_w, d,
-                                      w, h, row_stride);
-        else
-          {
-             if (src_h == h && src_w == w && row_stride == src_w * 4)
-               {
-                  uLongf dlen;
-
-                  dlen = w * h * 4;
-                  uncompress((Bytef *)d, &dlen, (Bytef *)body,
-                             (uLongf)(size - 32));
-               }
-             else
-               {
-                  Bytef *dtmp;
-                  uLongf dlen = src_w * src_h * 4;
-
-     /* FIXME: This could create a huge alloc. So compressed
-        data and tile could not always work. */
-                  dtmp = malloc(dlen);
-                  if (!dtmp)
-                    return 0;
-
-                  uncompress(dtmp, &dlen, (Bytef *)body, (uLongf)(size - 32));
-
-                  _eet_data_image_copy_buffer((unsigned int *)dtmp,
-                                              src_x, src_y, src_w, d,
-                                              w, h, row_stride);
-
-                  free(dtmp);
-               }
-          }
-
-        /* Fix swapiness. */
-        if (_eet_image_words_bigendian)
-          {
-             unsigned int x;
-
-             for (x = 0; x < (w * h); x++) SWAP32(d[x]);
-          }
-     }
-   else if (comp == 0 && lossy == 1)
-     {
-        if (alpha)
-          {
-             unsigned const char *dt;
-             int header[8];
-             int sz1, sz2;
-
-             memcpy(header, data, 32);
-             if (_eet_image_words_bigendian)
-               {
-                  int i;
-
-                  for (i = 0; i < 8; i++) SWAP32(header[i]);
-               }
-
-             sz1 = header[1];
-             sz2 = header[2];
-             dt = data;
-             dt += 12;
-
-             if (eet_data_image_jpeg_rgb_decode(dt, sz1, src_x, src_y, d, w, h,
-                                                row_stride))
-               {
-                  dt += sz1;
-                  if (!eet_data_image_jpeg_alpha_decode(dt, sz2, src_x, src_y,
-                                                        d, w, h, row_stride))
-                    return 0;
-               }
-          }
-        else if (!eet_data_image_jpeg_rgb_decode(data, size, src_x, src_y, d, w,
-                                                 h, row_stride))
-          return 0;
-     }
-   else
-     abort();
-
-   return 1;
-}
-
-EAPI void *
-eet_data_image_decode_cipher(const void   *data,
-                             const char   *cipher_key,
-                             int           size,
-                             unsigned int *w,
-                             unsigned int *h,
-                             int          *alpha,
-                             int          *comp,
-                             int          *quality,
-                             int          *lossy)
-{
-   unsigned int *d = NULL;
-   unsigned int iw, ih;
-   int ialpha, icompress, iquality, ilossy;
-   void *deciphered_d = NULL;
-   unsigned int deciphered_sz = 0;
-
-   if (cipher_key)
-     {
-        if (!eet_decipher(data, size, cipher_key, strlen(cipher_key),
-                          &deciphered_d, &deciphered_sz))
-          {
-             data = deciphered_d;
-             size = deciphered_sz;
-          }
-        else
-        if (deciphered_d)
-          free(deciphered_d);
-     }
-
-   /* All check are done during header decode, this simplify the code a lot. */
-   if (!eet_data_image_header_decode(data, size, &iw, &ih, &ialpha, &icompress,
-                                     &iquality, &ilossy))
-     return NULL;
-
-   d = malloc(iw * ih * 4);
-   if (!d)
-     return NULL;
-
-   if (!_eet_data_image_decode_inside(data, size, 0, 0, iw, ih, d, iw, ih, iw *
-                                      4, ialpha, icompress, iquality, ilossy))
-     {
-        free(d);
-        return NULL;
-     }
-
-   if (w)
-     *w = iw;
-
-   if (h)
-     *h = ih;
-
-   if (alpha)
-     *alpha = ialpha;
-
-   if (comp)
-     *comp = icompress;
-
-   if (quality)
-     *quality = iquality;
-
-   if (lossy)
-     *lossy = ilossy;
-
-   return d;
-}
-
-EAPI void *
-eet_data_image_decode(const void   *data,
-                      int           size,
-                      unsigned int *w,
-                      unsigned int *h,
-                      int          *alpha,
-                      int          *comp,
-                      int          *quality,
-                      int          *lossy)
-{
-   return eet_data_image_decode_cipher(data, NULL, size, w, h,
-                                       alpha, comp, quality, lossy);
-}
-
-EAPI int
-eet_data_image_decode_to_surface_cipher(const void   *data,
-                                        const char   *cipher_key,
-                                        int           size,
-                                        unsigned int  src_x,
-                                        unsigned int  src_y,
-                                        unsigned int *d,
-                                        unsigned int  w,
-                                        unsigned int  h,
-                                        unsigned int  row_stride,
-                                        int          *alpha,
-                                        int          *comp,
-                                        int          *quality,
-                                        int          *lossy)
-{
-   unsigned int iw, ih;
-   int ialpha, icompress, iquality, ilossy;
-   void *deciphered_d = NULL;
-   unsigned int deciphered_sz = 0;
-
-   if (cipher_key)
-     {
-        if (!eet_decipher(data, size, cipher_key, strlen(cipher_key),
-                          &deciphered_d, &deciphered_sz))
-          {
-             data = deciphered_d;
-             size = deciphered_sz;
-          }
-        else
-        if (deciphered_d)
-          free(deciphered_d);
-     }
-
-   /* All check are done during header decode, this simplify the code a lot. */
-   if (!eet_data_image_header_decode(data, size, &iw, &ih, &ialpha, &icompress,
-                                     &iquality, &ilossy))
-     return 0;
-
-   if (!d)
-     return 0;
-
-   if (w * 4 > row_stride)
-     return 0;
-
-   if (w > iw || h > ih)
-     return 0;
-
-   if (!_eet_data_image_decode_inside(data, size, src_x, src_y, iw, ih, d, w, h,
-                                      row_stride, ialpha, icompress, iquality,
-                                      ilossy))
-     return 0;
-
-   if (alpha)
-     *alpha = ialpha;
-
-   if (comp)
-     *comp = icompress;
-
-   if (quality)
-     *quality = iquality;
-
-   if (lossy)
-     *lossy = ilossy;
-
-   return 1;
-}
-
-EAPI int
-eet_data_image_decode_to_surface(const void   *data,
-                                 int           size,
-                                 unsigned int  src_x,
-                                 unsigned int  src_y,
-                                 unsigned int *d,
-                                 unsigned int  w,
-                                 unsigned int  h,
-                                 unsigned int  row_stride,
-                                 int          *alpha,
-                                 int          *comp,
-                                 int          *quality,
-                                 int          *lossy)
-{
-   return eet_data_image_decode_to_surface_cipher(data, NULL, size,
-                                                  src_x, src_y, d,
-                                                  w, h, row_stride,
-                                                  alpha, comp, quality,
-                                                  lossy);
-}
-
diff --git a/libraries/eet/src/lib/eet_lib.c b/libraries/eet/src/lib/eet_lib.c
deleted file mode 100644
index 04feebe..0000000
--- a/libraries/eet/src/lib/eet_lib.c
+++ /dev/null
@@ -1,2533 +0,0 @@
-#ifdef HAVE_CONFIG_H
-# include <config.h>
-#endif /* ifdef HAVE_CONFIG_H */
-
-#ifdef HAVE_ALLOCA_H
-# include <alloca.h>
-#elif defined __GNUC__
-# define alloca __builtin_alloca
-#elif defined _AIX
-# define alloca __alloca
-#elif defined _MSC_VER
-# include <malloc.h>
-# define alloca _alloca
-#else /* ifdef HAVE_ALLOCA_H */
-# include <stddef.h>
-# ifdef  __cplusplus
-extern "C"
-# endif /* ifdef  __cplusplus */
-void *alloca(size_t);
-#endif /* ifdef HAVE_ALLOCA_H */
-
-#ifdef _WIN32
-# include <winsock2.h>
-#endif /* ifdef _WIN32 */
-
-#include <stdio.h>
-#include <errno.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <time.h>
-#include <string.h>
-#include <fnmatch.h>
-#include <fcntl.h>
-#include <zlib.h>
-
-#ifdef HAVE_UNISTD_H
-# include <unistd.h>
-#endif /* ifdef HAVE_UNISTD_H */
-
-#ifdef HAVE_NETINET_IN_H
-# include <netinet/in.h>
-#endif /* ifdef HAVE_NETINET_IN_H */
-
-#ifdef HAVE_EVIL
-# include <Evil.h>
-#endif /* ifdef HAVE_EVIL */
-
-#include <Eina.h>
-
-#ifdef HAVE_GNUTLS
-# include <gnutls/gnutls.h>
-# include <gcrypt.h>
-#endif /* ifdef HAVE_GNUTLS */
-
-#ifdef HAVE_OPENSSL
-# include <openssl/err.h>
-# include <openssl/evp.h>
-#endif /* ifdef HAVE_OPENSSL */
-
-#ifdef EINA_HAVE_THREADS
-# ifdef HAVE_GNUTLS
-GCRY_THREAD_OPTION_PTHREAD_IMPL;
-# endif /* ifdef HAVE_GNUTLS */
-#endif /* ifdef EINA_HAVE_THREADS */
-
-#include "Eet.h"
-#include "Eet_private.h"
-
-#ifndef O_BINARY
-# define O_BINARY 0
-#endif
-
-static Eet_Version _version = { VMAJ, VMIN, VMIC, VREV };
-EAPI Eet_Version *eet_version = &_version;
-
-#ifdef HAVE_REALPATH
-# undef HAVE_REALPATH
-#endif /* ifdef HAVE_REALPATH */
-
-#define EET_MAGIC_FILE        0x1ee7ff00
-#define EET_MAGIC_FILE_HEADER 0x1ee7ff01
-
-#define EET_MAGIC_FILE2       0x1ee70f42
-
-#define EET_FILE2_HEADER_COUNT           3
-#define EET_FILE2_DIRECTORY_ENTRY_COUNT  6
-#define EET_FILE2_DICTIONARY_ENTRY_COUNT 5
-
-#define EET_FILE2_HEADER_SIZE            (sizeof(int) * \
-                                          EET_FILE2_HEADER_COUNT)
-#define EET_FILE2_DIRECTORY_ENTRY_SIZE   (sizeof(int) * \
-                                          EET_FILE2_DIRECTORY_ENTRY_COUNT)
-#define EET_FILE2_DICTIONARY_ENTRY_SIZE  (sizeof(int) * \
-                                          EET_FILE2_DICTIONARY_ENTRY_COUNT)
-
-/* prototypes of internal calls */
-static Eet_File *
-eet_cache_find(const char *path,
-               Eet_File  **cache,
-               int         cache_num);
-static void
-eet_cache_add(Eet_File   *ef,
-              Eet_File ***cache,
-              int        *cache_num,
-              int        *cache_alloc);
-static void
-eet_cache_del(Eet_File   *ef,
-              Eet_File ***cache,
-              int        *cache_num,
-              int        *cache_alloc);
-static int
-eet_string_match(const char *s1,
-                 const char *s2);
-#if 0 /* Unused */
-static Eet_Error
-eet_flush(Eet_File *ef);
-#endif /* if 0 */
-static Eet_Error
- eet_flush2(Eet_File *ef);
-static Eet_File_Node *
- find_node_by_name(Eet_File  *ef,
-                  const char *name);
-static int
-read_data_from_disk(Eet_File      *ef,
-                    Eet_File_Node *efn,
-                    void          *buf,
-                    int            len);
-
-static Eet_Error
-eet_internal_close(Eet_File *ef,
-                   Eina_Bool locked);
-
-static Eina_Lock eet_cache_lock;
-
-#define LOCK_CACHE   eina_lock_take(&eet_cache_lock)
-#define UNLOCK_CACHE eina_lock_release(&eet_cache_lock)
-
-#define INIT_FILE(File)    eina_lock_new(&File->file_lock)
-#define LOCK_FILE(File)    eina_lock_take(&File->file_lock)
-#define UNLOCK_FILE(File)  eina_lock_release(&File->file_lock)
-#define DESTROY_FILE(File) eina_lock_free(&File->file_lock)
-
-/* cache. i don't expect this to ever be large, so arrays will do */
-static int eet_writers_num = 0;
-static int eet_writers_alloc = 0;
-static Eet_File **eet_writers = NULL;
-static int eet_readers_num = 0;
-static int eet_readers_alloc = 0;
-static Eet_File **eet_readers = NULL;
-static int eet_init_count = 0;
-
-/* log domain variable */
-int _eet_log_dom_global = -1;
-
-/* Check to see its' an eet file pointer */
-static inline int
-eet_check_pointer(const Eet_File *ef)
-{
-   if ((!ef) || (ef->magic != EET_MAGIC_FILE))
-     return 1;
-
-   return 0;
-}
-
-static inline int
-eet_check_header(const Eet_File *ef)
-{
-   if (!ef->header)
-     return 1;
-
-   if (!ef->header->directory)
-     return 1;
-
-   return 0;
-}
-
-static inline int
-eet_test_close(int       test,
-               Eet_File *ef)
-{
-   if (test)
-     {
-        ef->delete_me_now = 1;
-        eet_internal_close(ef, EINA_TRUE);
-     }
-
-   return test;
-}
-
-/* find an eet file in the currently in use cache */
-static Eet_File *
-eet_cache_find(const char *path,
-               Eet_File  **cache,
-               int         cache_num)
-{
-   int i;
-
-   /* walk list */
-   for (i = 0; i < cache_num; i++)
-     {
-        /* if matches real path - return it */
-         if (eet_string_match(cache[i]->path, path))
-           if (!cache[i]->delete_me_now)
-             return cache[i];
-     }
-
-   /* not found */
-   return NULL;
-}
-
-/* add to end of cache */
-/* this should only be called when the cache lock is already held */
-static void
-eet_cache_add(Eet_File   *ef,
-              Eet_File ***cache,
-              int        *cache_num,
-              int        *cache_alloc)
-{
-   Eet_File **new_cache;
-   int new_cache_num;
-   int new_cache_alloc;
-
-   new_cache_num = *cache_num;
-   if (new_cache_num >= 64) /* avoid fd overruns - limit to 128 (most recent) in the cache */
-     {
-        Eet_File *del_ef = NULL;
-        int i;
-
-        new_cache = *cache;
-        for (i = 0; i < new_cache_num; i++)
-          {
-             if (new_cache[i]->references == 0)
-               {
-                  del_ef = new_cache[i];
-                  break;
-               }
-          }
-
-        if (del_ef)
-          {
-             del_ef->delete_me_now = 1;
-             eet_internal_close(del_ef, EINA_TRUE);
-          }
-     }
-
-   new_cache = *cache;
-   new_cache_num = *cache_num;
-   new_cache_alloc = *cache_alloc;
-   new_cache_num++;
-   if (new_cache_num > new_cache_alloc)
-     {
-        new_cache_alloc += 16;
-        new_cache = realloc(new_cache, new_cache_alloc * sizeof(Eet_File *));
-        if (!new_cache)
-          {
-             CRIT("BAD ERROR! Eet realloc of cache list failed. Abort");
-             abort();
-          }
-     }
-
-   new_cache[new_cache_num - 1] = ef;
-   *cache = new_cache;
-   *cache_num = new_cache_num;
-   *cache_alloc = new_cache_alloc;
-}
-
-/* delete from cache */
-/* this should only be called when the cache lock is already held */
-static void
-eet_cache_del(Eet_File   *ef,
-              Eet_File ***cache,
-              int        *cache_num,
-              int        *cache_alloc)
-{
-   Eet_File **new_cache;
-   int new_cache_num, new_cache_alloc;
-   int i, j;
-
-   new_cache = *cache;
-   new_cache_num = *cache_num;
-   new_cache_alloc = *cache_alloc;
-   if (new_cache_num <= 0)
-     return;
-
-   for (i = 0; i < new_cache_num; i++)
-     {
-        if (new_cache[i] == ef)
-          break;
-     }
-
-   if (i >= new_cache_num)
-     return;
-
-   new_cache_num--;
-   for (j = i; j < new_cache_num; j++)
-     new_cache[j] = new_cache[j + 1];
-
-   if (new_cache_num <= (new_cache_alloc - 16))
-     {
-        new_cache_alloc -= 16;
-        if (new_cache_num > 0)
-          {
-             new_cache = realloc(new_cache, new_cache_alloc * sizeof(Eet_File *));
-             if (!new_cache)
-               {
-                  CRIT("BAD ERROR! Eet realloc of cache list failed. Abort");
-                  abort();
-               }
-          }
-        else
-          {
-             free(new_cache);
-             new_cache = NULL;
-          }
-     }
-
-   *cache = new_cache;
-   *cache_num = new_cache_num;
-   *cache_alloc = new_cache_alloc;
-}
-
-/* internal string match. null friendly, catches same ptr */
-static int
-eet_string_match(const char *s1,
-                 const char *s2)
-{
-   /* both null- no match */
-    if ((!s1) || (!s2))
-      return 0;
-
-    if (s1 == s2)
-      return 1;
-
-    return !strcmp(s1, s2);
-}
-
-/* flush out writes to a v2 eet file */
-static Eet_Error
-eet_flush2(Eet_File *ef)
-{
-   Eet_File_Node *efn;
-   FILE *fp;
-   Eet_Error error = EET_ERROR_NONE;
-   int head[EET_FILE2_HEADER_COUNT];
-   int num_directory_entries = 0;
-   int num_dictionary_entries = 0;
-   int bytes_directory_entries = 0;
-   int bytes_dictionary_entries = 0;
-   int bytes_strings = 0;
-   int data_offset = 0;
-   int strings_offset = 0;
-   int num;
-   int i;
-   int j;
-
-   if (eet_check_pointer(ef))
-     return EET_ERROR_BAD_OBJECT;
-
-   if (eet_check_header(ef))
-     return EET_ERROR_EMPTY;
-
-   if (!ef->writes_pending)
-     return EET_ERROR_NONE;
-
-   if ((ef->mode == EET_FILE_MODE_READ_WRITE)
-       || (ef->mode == EET_FILE_MODE_WRITE))
-     {
-        int fd;
-
-        /* opening for write - delete old copy of file right away */
-        unlink(ef->path);
-        fd = open(ef->path, O_CREAT | O_TRUNC | O_RDWR | O_BINARY, S_IRUSR | S_IWUSR);
-        fp = fdopen(fd, "wb");
-        if (!fp)
-          return EET_ERROR_NOT_WRITABLE;
-
-        fcntl(fd, F_SETFD, FD_CLOEXEC);
-     }
-   else
-     return EET_ERROR_NOT_WRITABLE;
-
-   /* calculate string base offset and data base offset */
-   num = (1 << ef->header->directory->size);
-   for (i = 0; i < num; ++i)
-     {
-        for (efn = ef->header->directory->nodes[i]; efn; efn = efn->next)
-          {
-             num_directory_entries++;
-             bytes_strings += strlen(efn->name) + 1;
-          }
-     }
-   if (ef->ed)
-     {
-        num_dictionary_entries = ef->ed->count;
-
-        for (i = 0; i < num_dictionary_entries; ++i)
-          bytes_strings += ef->ed->all[i].len;
-     }
-
-   /* calculate section bytes size */
-   bytes_directory_entries = EET_FILE2_DIRECTORY_ENTRY_SIZE *
-     num_directory_entries + EET_FILE2_HEADER_SIZE;
-   bytes_dictionary_entries = EET_FILE2_DICTIONARY_ENTRY_SIZE *
-     num_dictionary_entries;
-
-   /* calculate per entry offset */
-   strings_offset = bytes_directory_entries + bytes_dictionary_entries;
-   data_offset = bytes_directory_entries + bytes_dictionary_entries +
-     bytes_strings;
-
-   for (i = 0; i < num; ++i)
-     {
-        for (efn = ef->header->directory->nodes[i]; efn; efn = efn->next)
-          {
-             efn->offset = data_offset;
-             data_offset += efn->size;
-
-             efn->name_offset = strings_offset;
-             strings_offset += efn->name_size;
-          }
-     }
-
-   /* calculate dictionary strings offset */
-   if (ef->ed)
-     ef->ed->offset = strings_offset;
-
-   /* go thru and write the header */
-   head[0] = (int)htonl((unsigned int)EET_MAGIC_FILE2);
-   head[1] = (int)htonl((unsigned int)num_directory_entries);
-   head[2] = (int)htonl((unsigned int)num_dictionary_entries);
-
-   fseek(fp, 0, SEEK_SET);
-   if (fwrite(head, sizeof (head), 1, fp) != 1)
-     goto write_error;
-
-   /* write directories entry */
-   for (i = 0; i < num; i++)
-     {
-        for (efn = ef->header->directory->nodes[i]; efn; efn = efn->next)
-          {
-             unsigned int flag;
-             int ibuf[EET_FILE2_DIRECTORY_ENTRY_COUNT];
-
-             flag = (efn->alias << 2) | (efn->ciphered << 1) | efn->compression;
-
-             ibuf[0] = (int)htonl((unsigned int)efn->offset);
-             ibuf[1] = (int)htonl((unsigned int)efn->size);
-             ibuf[2] = (int)htonl((unsigned int)efn->data_size);
-             ibuf[3] = (int)htonl((unsigned int)efn->name_offset);
-             ibuf[4] = (int)htonl((unsigned int)efn->name_size);
-             ibuf[5] = (int)htonl((unsigned int)flag);
-
-             if (fwrite(ibuf, sizeof(ibuf), 1, fp) != 1)
-               goto write_error;
-          }
-     }
-
-   /* write dictionary */
-   if (ef->ed)
-     {
-        int offset = strings_offset;
-
-        for (j = 0; j < ef->ed->count; ++j)
-          {
-             int sbuf[EET_FILE2_DICTIONARY_ENTRY_COUNT];
-
-             sbuf[0] = (int)htonl((unsigned int)ef->ed->all[j].hash);
-             sbuf[1] = (int)htonl((unsigned int)offset);
-             sbuf[2] = (int)htonl((unsigned int)ef->ed->all[j].len);
-             sbuf[3] = (int)htonl((unsigned int)ef->ed->all[j].prev);
-             sbuf[4] = (int)htonl((unsigned int)ef->ed->all[j].next);
-
-             offset += ef->ed->all[j].len;
-
-             if (fwrite(sbuf, sizeof (sbuf), 1, fp) != 1)
-               goto write_error;
-          }
-     }
-
-   /* write directories name */
-   for (i = 0; i < num; i++)
-     {
-        for (efn = ef->header->directory->nodes[i]; efn; efn = efn->next)
-          {
-             if (fwrite(efn->name, efn->name_size, 1, fp) != 1)
-               goto write_error;
-          }
-     }
-
-   /* write strings */
-   if (ef->ed)
-     for (j = 0; j < ef->ed->count; ++j)
-       {
-          if (fwrite(ef->ed->all[j].str, ef->ed->all[j].len, 1, fp) != 1)
-            goto write_error;
-       }
-
-   /* write data */
-   for (i = 0; i < num; i++)
-     {
-        for (efn = ef->header->directory->nodes[i]; efn; efn = efn->next)
-          {
-             if (fwrite(efn->data, efn->size, 1, fp) != 1)
-               goto write_error;
-          }
-     }
-
-   /* flush all write to the file. */
-   fflush(fp);
-
-   /* append signature if required */
-   if (ef->key)
-     {
-        error = eet_identity_sign(fp, ef->key);
-        if (error != EET_ERROR_NONE)
-          goto sign_error;
-     }
-
-   /* no more writes pending */
-   ef->writes_pending = 0;
-
-   fclose(fp);
-
-   return EET_ERROR_NONE;
-
-write_error:
-   if (ferror(fp))
-     {
-        switch (errno)
-          {
-           case EFBIG: error = EET_ERROR_WRITE_ERROR_FILE_TOO_BIG; break;
-
-           case EIO: error = EET_ERROR_WRITE_ERROR_IO_ERROR; break;
-
-           case ENOSPC: error = EET_ERROR_WRITE_ERROR_OUT_OF_SPACE; break;
-
-           case EPIPE: error = EET_ERROR_WRITE_ERROR_FILE_CLOSED; break;
-
-           default: error = EET_ERROR_WRITE_ERROR; break;
-          }
-     }
-
-sign_error:
-   fclose(fp);
-   return error;
-}
-
-EAPI int
-eet_init(void)
-{
-   if (++eet_init_count != 1)
-     return eet_init_count;
-
-   if (!eina_init())
-     return --eet_init_count;
-
-   _eet_log_dom_global = eina_log_domain_register("eet", EET_DEFAULT_LOG_COLOR);
-   if (_eet_log_dom_global < 0)
-     {
-        EINA_LOG_ERR("Eet Can not create a general log domain.");
-        goto shutdown_eina;
-     }
-
-   eina_lock_new(&eet_cache_lock);
-
-   if (!eet_mempool_init())
-     {
-        EINA_LOG_ERR("Eet: Eet_Node mempool creation failed");
-        goto unregister_log_domain;
-     }
-
-   if (!eet_node_init())
-     {
-        EINA_LOG_ERR("Eet: Eet_Node mempool creation failed");
-        goto shutdown_mempool;
-     }
-
-#ifdef HAVE_GNUTLS
-   /* Before the library can be used, it must initialize itself if needed. */
-   if (gcry_control(GCRYCTL_ANY_INITIALIZATION_P) == 0)
-     {
-        gcry_check_version(NULL);
-        /* Disable warning messages about problems with the secure memory subsystem.
-           This command should be run right after gcry_check_version. */
-        if (gcry_control(GCRYCTL_DISABLE_SECMEM_WARN))
-          goto shutdown_eet;  /* This command is used to allocate a pool of secure memory and thus
-                                 enabling the use of secure memory. It also drops all extra privileges the
-                                 process has (i.e. if it is run as setuid (root)). If the argument nbytes
-                                 is 0, secure memory will be disabled. The minimum amount of secure memory
-                                 allocated is currently 16384 bytes; you may thus use a value of 1 to
-                                 request that default size. */
-
-        if (gcry_control(GCRYCTL_INIT_SECMEM, 16384, 0))
-          WRN(
-            "BIG FAT WARNING: I AM UNABLE TO REQUEST SECMEM, Cryptographic operation are at risk !");
-     }
-
-# ifdef EINA_HAVE_THREADS
-   if (gcry_control(GCRYCTL_SET_THREAD_CBS, &gcry_threads_pthread))
-     WRN(
-       "YOU ARE USING PTHREADS, BUT I CANNOT INITIALIZE THREADSAFE GCRYPT OPERATIONS!");
-
-# endif /* ifdef EINA_HAVE_THREADS */
-   if (gnutls_global_init())
-     goto shutdown_eet;
-
-#endif /* ifdef HAVE_GNUTLS */
-#ifdef HAVE_OPENSSL
-   ERR_load_crypto_strings();
-   OpenSSL_add_all_algorithms();
-#endif /* ifdef HAVE_OPENSSL */
-
-   return eet_init_count;
-
-#ifdef HAVE_GNUTLS
-shutdown_eet:
-#endif
-   eet_node_shutdown();
-shutdown_mempool:
-   eet_mempool_shutdown();
-unregister_log_domain:
-   eina_log_domain_unregister(_eet_log_dom_global);
-   _eet_log_dom_global = -1;
-shutdown_eina:
-   eina_shutdown();
-   return --eet_init_count;
-}
-
-EAPI int
-eet_shutdown(void)
-{
-   if (--eet_init_count != 0)
-     return eet_init_count;
-
-   eet_clearcache();
-   eet_node_shutdown();
-   eet_mempool_shutdown();
-
-   eina_lock_free(&eet_cache_lock);
-
-#ifdef HAVE_GNUTLS
-   gnutls_global_deinit();
-#endif /* ifdef HAVE_GNUTLS */
-#ifdef HAVE_OPENSSL
-   EVP_cleanup();
-   ERR_free_strings();
-#endif /* ifdef HAVE_OPENSSL */
-   eina_log_domain_unregister(_eet_log_dom_global);
-   _eet_log_dom_global = -1;
-   eina_shutdown();
-
-   return eet_init_count;
-}
-
-EAPI Eet_Error
-eet_sync(Eet_File *ef)
-{
-   Eet_Error ret;
-
-   if (eet_check_pointer(ef))
-     return EET_ERROR_BAD_OBJECT;
-
-   if ((ef->mode != EET_FILE_MODE_WRITE) &&
-       (ef->mode != EET_FILE_MODE_READ_WRITE))
-     return EET_ERROR_NOT_WRITABLE;
-
-   if (!ef->writes_pending)
-     return EET_ERROR_NONE;
-
-   LOCK_FILE(ef);
-
-   ret = eet_flush2(ef);
-
-   UNLOCK_FILE(ef);
-   return ret;
-}
-
-EAPI void
-eet_clearcache(void)
-{
-   int num = 0;
-   int i;
-
-   /*
-    * We need to compute the list of eet file to close separately from the cache,
-    * due to eet_close removing them from the cache after each call.
-    */
-   LOCK_CACHE;
-   for (i = 0; i < eet_writers_num; i++)
-     {
-        if (eet_writers[i]->references <= 0)
-          num++;
-     }
-
-   for (i = 0; i < eet_readers_num; i++)
-     {
-        if (eet_readers[i]->references <= 0)
-          num++;
-     }
-
-   if (num > 0)
-     {
-        Eet_File **closelist = NULL;
-
-        closelist = alloca(num * sizeof(Eet_File *));
-        num = 0;
-        for (i = 0; i < eet_writers_num; i++)
-          {
-             if (eet_writers[i]->references <= 0)
-               {
-                  closelist[num] = eet_writers[i];
-                  eet_writers[i]->delete_me_now = 1;
-                  num++;
-               }
-          }
-
-        for (i = 0; i < eet_readers_num; i++)
-          {
-             if (eet_readers[i]->references <= 0)
-               {
-                  closelist[num] = eet_readers[i];
-                  eet_readers[i]->delete_me_now = 1;
-                  num++;
-               }
-          }
-
-        for (i = 0; i < num; i++)
-          {
-             eet_internal_close(closelist[i], EINA_TRUE);
-          }
-     }
-
-   UNLOCK_CACHE;
-}
-
-/* FIXME: MMAP race condition in READ_WRITE_MODE */
-static Eet_File *
-eet_internal_read2(Eet_File *ef)
-{
-   const int *data = (const int *)ef->data;
-   const char *start = (const char *)ef->data;
-   int idx = 0;
-   unsigned long int bytes_directory_entries;
-   unsigned long int bytes_dictionary_entries;
-   unsigned long int signature_base_offset;
-   unsigned long int num_directory_entries;
-   unsigned long int num_dictionary_entries;
-   unsigned int i;
-
-   idx += sizeof(int);
-   if (eet_test_close((int)ntohl(*data) != EET_MAGIC_FILE2, ef))
-     return NULL;
-
-   data++;
-
-#define GET_INT(Value, Pointer, Index) \
-  {                                    \
-     Value = ntohl(*Pointer);          \
-     Pointer++;                        \
-     Index += sizeof(int);             \
-  }
-
-   /* get entries count and byte count */
-   GET_INT(num_directory_entries, data, idx);
-   /* get dictionary count and byte count */
-   GET_INT(num_dictionary_entries, data, idx);
-
-   bytes_directory_entries = EET_FILE2_DIRECTORY_ENTRY_SIZE *
-     num_directory_entries + EET_FILE2_HEADER_SIZE;
-   bytes_dictionary_entries = EET_FILE2_DICTIONARY_ENTRY_SIZE *
-     num_dictionary_entries;
-
-   /* we can't have > 0x7fffffff values here - invalid */
-   if (eet_test_close((num_directory_entries > 0x7fffffff), ef))
-     return NULL;
-
-   /* we can't have more bytes directory and bytes in dictionaries than the size of the file */
-   if (eet_test_close((bytes_directory_entries + bytes_dictionary_entries) >
-                      ef->data_size, ef))
-     return NULL;
-
-   /* allocate header */
-   ef->header = eet_file_header_calloc(1);
-   if (eet_test_close(!ef->header, ef))
-     return NULL;
-
-   ef->header->magic = EET_MAGIC_FILE_HEADER;
-
-   /* allocate directory block in ram */
-   ef->header->directory = eet_file_directory_calloc(1);
-   if (eet_test_close(!ef->header->directory, ef))
-     return NULL;
-
-   /* 8 bit hash table (256 buckets) */
-   ef->header->directory->size = 8;
-   /* allocate base hash table */
-   ef->header->directory->nodes =
-     calloc(1, sizeof(Eet_File_Node *) * (1 << ef->header->directory->size));
-   if (eet_test_close(!ef->header->directory->nodes, ef))
-     return NULL;
-
-   signature_base_offset = 0;
-   if (num_directory_entries == 0)
-     {
-        signature_base_offset = ef->data_size;
-     }
-
-   /* actually read the directory block - all of it, into ram */
-   for (i = 0; i < num_directory_entries; ++i)
-     {
-        const char *name;
-        Eet_File_Node *efn;
-        unsigned long int name_offset;
-        unsigned long int name_size;
-        int hash;
-        int flag;
-
-        /* out directory block is inconsistent - we have overrun our */
-        /* dynamic block buffer before we finished scanning dir entries */
-        efn = eet_file_node_malloc(1);
-        if (eet_test_close(!efn, ef))
-          {
-             if (efn) eet_file_node_mp_free(efn);  /* yes i know - we only get here if
-                                   * efn is null/0 -> trying to shut up
-                                   * warning tools like cppcheck */
-             return NULL;
-          }
-
-        /* get entrie header */
-        GET_INT(efn->offset, data, idx);
-        GET_INT(efn->size, data, idx);
-        GET_INT(efn->data_size, data, idx);
-        GET_INT(name_offset, data, idx);
-        GET_INT(name_size, data, idx);
-        GET_INT(flag, data, idx);
-
-        efn->compression = flag & 0x1 ? 1 : 0;
-        efn->ciphered = flag & 0x2 ? 1 : 0;
-        efn->alias = flag & 0x4 ? 1 : 0;
-
-#define EFN_TEST(Test, Ef, Efn) \
-  if (eet_test_close(Test, Ef)) \
-    {                           \
-       eet_file_node_mp_free(Efn);               \
-       return NULL;             \
-    }
-
-        /* check data pointer position */
-        EFN_TEST(!((efn->size > 0)
-                   && (efn->offset + efn->size <= ef->data_size)
-                   && (efn->offset > bytes_dictionary_entries +
-                       bytes_directory_entries)), ef, efn);
-
-        /* check name position */
-        EFN_TEST(!((name_size > 0)
-                   && (name_offset + name_size < ef->data_size)
-                   && (name_offset >= bytes_dictionary_entries +
-                       bytes_directory_entries)), ef, efn);
-
-        name = start + name_offset;
-
-        /* check '\0' at the end of name string */
-        EFN_TEST(name[name_size - 1] != '\0', ef, efn);
-
-        efn->free_name = 0;
-        efn->name = (char *)name;
-        efn->name_size = name_size;
-
-        hash = _eet_hash_gen(efn->name, ef->header->directory->size);
-        efn->next = ef->header->directory->nodes[hash];
-        ef->header->directory->nodes[hash] = efn;
-
-        /* read-only mode, so currently we have no data loaded */
-        if (ef->mode == EET_FILE_MODE_READ)
-          efn->data = NULL;  /* read-write mode - read everything into ram */
-        else
-          {
-             efn->data = malloc(efn->size);
-             if (efn->data)
-               memcpy(efn->data, ef->data + efn->offset, efn->size);
-          }
-
-        /* compute the possible position of a signature */
-        if (signature_base_offset < efn->offset + efn->size)
-          signature_base_offset = efn->offset + efn->size;
-     }
-
-   ef->ed = NULL;
-
-   if (num_dictionary_entries)
-     {
-        const int *dico = (const int *)ef->data +
-          EET_FILE2_DIRECTORY_ENTRY_COUNT * num_directory_entries +
-          EET_FILE2_HEADER_COUNT;
-        int j;
-
-        if (eet_test_close((num_dictionary_entries *
-                            (int)EET_FILE2_DICTIONARY_ENTRY_SIZE + idx) >
-                           (bytes_dictionary_entries + bytes_directory_entries),
-                           ef))
-          return NULL;
-
-        ef->ed = eet_dictionary_calloc(1);
-        if (eet_test_close(!ef->ed, ef))
-          return NULL;
-
-        ef->ed->all = calloc(1, num_dictionary_entries * sizeof(Eet_String));
-        if (eet_test_close(!ef->ed->all, ef))
-          return NULL;
-
-        ef->ed->count = num_dictionary_entries;
-        ef->ed->total = num_dictionary_entries;
-        ef->ed->start = start + bytes_dictionary_entries +
-          bytes_directory_entries;
-        ef->ed->end = ef->ed->start;
-
-        for (j = 0; j < ef->ed->count; ++j)
-          {
-             unsigned int offset;
-             int hash;
-
-             GET_INT(hash, dico, idx);
-             GET_INT(offset, dico, idx);
-             GET_INT(ef->ed->all[j].len, dico, idx);
-             GET_INT(ef->ed->all[j].prev, dico, idx);
-             GET_INT(ef->ed->all[j].next, dico, idx);
-
-             /* Hash value could be stored on 8bits data, but this will break alignment of all the others data.
-                So stick to int and check the value. */
-             if (eet_test_close(hash & 0xFFFFFF00, ef))
-               return NULL;
-
-             /* Check string position */
-             if (eet_test_close(!((ef->ed->all[j].len > 0)
-                                  && (offset >
-                                      (bytes_dictionary_entries +
-                                       bytes_directory_entries))
-                                  && (offset + ef->ed->all[j].len <
-                                      ef->data_size)), ef))
-               return NULL;
-
-             ef->ed->all[j].str = start + offset;
-
-             if (ef->ed->all[j].str + ef->ed->all[j].len > ef->ed->end)
-               ef->ed->end = ef->ed->all[j].str + ef->ed->all[j].len;
-
-             /* Check '\0' at the end of the string */
-             if (eet_test_close(ef->ed->all[j].str[ef->ed->all[j].len - 1] !=
-                                '\0', ef))
-               return NULL;
-
-             ef->ed->all[j].hash = hash;
-             if (ef->ed->all[j].prev == -1)
-               ef->ed->hash[hash] = j;
-
-             /* compute the possible position of a signature */
-             if (signature_base_offset < offset + ef->ed->all[j].len)
-               signature_base_offset = offset + ef->ed->all[j].len;
-          }
-     }
-
-   /* Check if the file is signed */
-   ef->x509_der = NULL;
-   ef->x509_length = 0;
-   ef->signature = NULL;
-   ef->signature_length = 0;
-
-   if (signature_base_offset < ef->data_size)
-     {
-#ifdef HAVE_SIGNATURE
-        const unsigned char *buffer = ((const unsigned char *)ef->data) +
-          signature_base_offset;
-        ef->x509_der = eet_identity_check(ef->data,
-                                          signature_base_offset,
-                                          &ef->sha1,
-                                          &ef->sha1_length,
-                                          buffer,
-                                          ef->data_size - signature_base_offset,
-                                          &ef->signature,
-                                          &ef->signature_length,
-                                          &ef->x509_length);
-
-        if (eet_test_close(!ef->x509_der, ef))
-          return NULL;
-
-#else /* ifdef HAVE_SIGNATURE */
-        ERR(
-          "This file could be signed but you didn't compile the necessary code to check the signature.");
-#endif /* ifdef HAVE_SIGNATURE */
-     }
-
-   return ef;
-}
-
-#if EET_OLD_EET_FILE_FORMAT
-static Eet_File *
-eet_internal_read1(Eet_File *ef)
-{
-   const unsigned char *dyn_buf = NULL;
-   const unsigned char *p = NULL;
-   unsigned long int byte_entries;
-   unsigned long int num_entries;
-   unsigned int i;
-   int idx = 0;
-
-   WRN(
-     "EET file format of '%s' is deprecated. You should just open it one time with mode == EET_FILE_MODE_READ_WRITE to solve this issue.",
-     ef->path);
-
-   /* build header table if read mode */
-   /* geat header */
-   idx += sizeof(int);
-   if (eet_test_close((int)ntohl(*((int *)ef->data)) != EET_MAGIC_FILE, ef))
-     return NULL;
-
-#define EXTRACT_INT(Value, Pointer, Index)       \
-  {                                              \
-     int tmp;                                    \
-     memcpy(&tmp, Pointer + Index, sizeof(int)); \
-     Value = ntohl(tmp);                         \
-     Index += sizeof(int);                       \
-  }
-
-   /* get entries count and byte count */
-   EXTRACT_INT(num_entries, ef->data, idx);
-   EXTRACT_INT(byte_entries, ef->data, idx);
-
-   /* we can't have <= 0 values here - invalid */
-   if (eet_test_close((num_entries > 0x7fffffff) ||
-                      (byte_entries > 0x7fffffff), ef))
-     return NULL;
-
-   /* we can't have more entires than minimum bytes for those! invalid! */
-   if (eet_test_close((num_entries * 20) > byte_entries, ef))
-     return NULL;
-
-   /* check we will not outrun the file limit */
-   if (eet_test_close(((byte_entries + (int)(sizeof(int) * 3)) >
-                       ef->data_size), ef))
-     return NULL;
-
-   /* allocate header */
-   ef->header = eet_file_header_calloc(1);
-   if (eet_test_close(!ef->header, ef))
-     return NULL;
-
-   ef->header->magic = EET_MAGIC_FILE_HEADER;
-
-   /* allocate directory block in ram */
-   ef->header->directory = eet_file_directory_calloc(1);
-   if (eet_test_close(!ef->header->directory, ef))
-     return NULL;
-
-   /* 8 bit hash table (256 buckets) */
-   ef->header->directory->size = 8;
-   /* allocate base hash table */
-   ef->header->directory->nodes =
-     calloc(1, sizeof(Eet_File_Node *) * (1 << ef->header->directory->size));
-   if (eet_test_close(!ef->header->directory->nodes, ef))
-     return NULL;
-
-   /* actually read the directory block - all of it, into ram */
-   dyn_buf = ef->data + idx;
-
-   /* parse directory block */
-   p = dyn_buf;
-
-   for (i = 0; i < num_entries; i++)
-     {
-        Eet_File_Node *efn;
-        void *data = NULL;
-        int indexn = 0;
-        int name_size;
-        int hash;
-        int k;
-
-#define HEADER_SIZE (sizeof(int) * 5)
-
-        /* out directory block is inconsistent - we have overrun our */
-        /* dynamic block buffer before we finished scanning dir entries */
-        if (eet_test_close(p + HEADER_SIZE >= (dyn_buf + byte_entries), ef))
-          return NULL;
-
-        /* allocate all the ram needed for this stored node accounting */
-        efn = eet_file_node_malloc(1);
-        if (eet_test_close(!efn, ef))
-          {
-             if (efn) eet_file_node_mp_free(efn);  /* yes i know - we only get here if
-                                   * efn is null/0 -> trying to shut up
-                                   * warning tools like cppcheck */
-             return NULL;
-          }
-
-        /* get entrie header */
-        EXTRACT_INT(efn->offset, p, indexn);
-        EXTRACT_INT(efn->compression, p, indexn);
-        EXTRACT_INT(efn->size, p, indexn);
-        EXTRACT_INT(efn->data_size, p, indexn);
-        EXTRACT_INT(name_size, p, indexn);
-
-        efn->name_size = name_size;
-        efn->ciphered = 0;
-        efn->alias = 0;
-
-        /* invalid size */
-        if (eet_test_close(efn->size <= 0, ef))
-          {
-             eet_file_node_mp_free(efn);
-             return NULL;
-          }
-
-        /* invalid name_size */
-        if (eet_test_close(name_size <= 0, ef))
-          {
-             eet_file_node_mp_free(efn);
-             return NULL;
-          }
-
-        /* reading name would mean falling off end of dyn_buf - invalid */
-        if (eet_test_close((p + 16 + name_size) > (dyn_buf + byte_entries), ef))
-          {
-             eet_file_node_mp_free(efn);
-             return NULL;
-          }
-
-        /* This code is useless if we dont want backward compatibility */
-        for (k = name_size;
-             k > 0 && ((unsigned char)*(p + HEADER_SIZE + k)) != 0; --k)
-          ;
-
-        efn->free_name = ((unsigned char)*(p + HEADER_SIZE + k)) != 0;
-
-        if (efn->free_name)
-          {
-             efn->name = malloc(sizeof(char) * name_size + 1);
-             if (eet_test_close(!efn->name, ef))
-               {
-                  eet_file_node_mp_free(efn);
-                  return NULL;
-               }
-
-             strncpy(efn->name, (char *)p + HEADER_SIZE, name_size);
-             efn->name[name_size] = 0;
-
-             WRN(
-               "File: %s is not up to date for key \"%s\" - needs rebuilding sometime",
-               ef->path,
-               efn->name);
-          }
-        else
-          /* The only really useful peace of code for efn->name (no backward compatibility) */
-          efn->name = (char *)((unsigned char *)(p + HEADER_SIZE));
-
-        /* get hash bucket it should go in */
-        hash = _eet_hash_gen(efn->name, ef->header->directory->size);
-        efn->next = ef->header->directory->nodes[hash];
-        ef->header->directory->nodes[hash] = efn;
-
-        /* read-only mode, so currently we have no data loaded */
-        if (ef->mode == EET_FILE_MODE_READ)
-          efn->data = NULL;  /* read-write mode - read everything into ram */
-        else
-          {
-             data = malloc(efn->size);
-             if (data)
-               memcpy(data, ef->data + efn->offset, efn->size);
-
-             efn->data = data;
-          }
-
-        /* advance */
-        p += HEADER_SIZE + name_size;
-     }
-   return ef;
-}
-
-#endif /* if EET_OLD_EET_FILE_FORMAT */
-
-/*
- * this should only be called when the cache lock is already held
- * (We could drop this restriction if we add a parameter to eet_test_close
- * that indicates if the lock is held or not.  For now it is easiest
- * to just require that it is always held.)
- */
-static Eet_File *
-eet_internal_read(Eet_File *ef)
-{
-   const int *data = (const int *)ef->data;
-
-   if (eet_test_close((ef->data == (void *)-1) || (!ef->data), ef))
-     return NULL;
-
-   if (eet_test_close(ef->data_size < (int)sizeof(int) * 3, ef))
-     return NULL;
-
-   switch (ntohl(*data))
-     {
-#if EET_OLD_EET_FILE_FORMAT
-      case EET_MAGIC_FILE:
-        return eet_internal_read1(ef);
-
-#endif /* if EET_OLD_EET_FILE_FORMAT */
-      case EET_MAGIC_FILE2:
-        return eet_internal_read2(ef);
-
-      default:
-        ef->delete_me_now = 1;
-        eet_internal_close(ef, EINA_TRUE);
-        break;
-     }
-
-   return NULL;
-}
-
-static Eet_Error
-eet_internal_close(Eet_File *ef,
-                   Eina_Bool locked)
-{
-   Eet_Error err;
-
-   /* check to see its' an eet file pointer */
-   if (eet_check_pointer(ef))
-     return EET_ERROR_BAD_OBJECT;
-
-   if (!locked)
-     LOCK_CACHE;
-
-   /* deref */
-   ef->references--;
-   /* if its still referenced - dont go any further */
-   if (ef->references > 0)
-     {
-        /* flush any writes */
-         if ((ef->mode == EET_FILE_MODE_WRITE) ||
-             (ef->mode == EET_FILE_MODE_READ_WRITE))
-           eet_sync(ef);
-         goto on_error;
-     }
-
-   err = eet_flush2(ef);
-
-   eet_identity_unref(ef->key);
-   ef->key = NULL;
-
-   /* if not urgent to delete it - dont free it - leave it in cache */
-   if ((!ef->delete_me_now) && (ef->mode == EET_FILE_MODE_READ))
-     goto on_error;
-
-   /* remove from cache */
-   if (ef->mode == EET_FILE_MODE_READ)
-     eet_cache_del(ef, &eet_readers, &eet_readers_num, &eet_readers_alloc);
-   else if ((ef->mode == EET_FILE_MODE_WRITE) ||
-            (ef->mode == EET_FILE_MODE_READ_WRITE))
-     eet_cache_del(ef, &eet_writers, &eet_writers_num, &eet_writers_alloc);
-
-   /* we can unlock the cache now */
-   if (!locked)
-     UNLOCK_CACHE;
-
-   DESTROY_FILE(ef);
-
-   /* free up data */
-   if (ef->header)
-     {
-        if (ef->header->directory)
-          {
-             if (ef->header->directory->nodes)
-               {
-                  int i, num;
-
-                  num = (1 << ef->header->directory->size);
-                  for (i = 0; i < num; i++)
-                    {
-                       Eet_File_Node *efn;
-
-                       while ((efn = ef->header->directory->nodes[i]))
-                         {
-                            if (efn->data)
-                              free(efn->data);
-
-                            ef->header->directory->nodes[i] = efn->next;
-
-                            if (efn->free_name)
-                              free(efn->name);
-
-                            eet_file_node_mp_free(efn);
-                         }
-                    }
-                  free(ef->header->directory->nodes);
-               }
-
-             eet_file_directory_mp_free(ef->header->directory);
-          }
-
-        eet_file_header_mp_free(ef->header);
-     }
-
-   eet_dictionary_free(ef->ed);
-
-   if (ef->sha1)
-     free(ef->sha1);
-
-   if (ef->readfp)
-     {
-        if (ef->data)
-          eina_file_map_free(ef->readfp, (void *)ef->data);
-
-        eina_file_close(ef->readfp);
-     }
-
-   /* zero out ram for struct - caution tactic against stale memory use */
-   memset(ef, 0, sizeof(Eet_File));
-
-   /* free it */
-   eina_stringshare_del(ef->path);
-   eet_file_mp_free(ef);
-   return err;
-
-on_error:
-   if (!locked)
-     UNLOCK_CACHE;
-
-   return EET_ERROR_NONE;
-}
-
-EAPI Eet_File *
-eet_memopen_read(const void *data,
-                 size_t      size)
-{
-   Eet_File *ef;
-
-   if (!data || size == 0)
-     return NULL;
-
-   ef = eet_file_malloc(1);
-   if (!ef)
-     return NULL;
-
-   INIT_FILE(ef);
-   ef->ed = NULL;
-   ef->path = NULL;
-   ef->key = NULL;
-   ef->magic = EET_MAGIC_FILE;
-   ef->references = 1;
-   ef->mode = EET_FILE_MODE_READ;
-   ef->header = NULL;
-   ef->delete_me_now = 1;
-   ef->readfp = NULL;
-   ef->data = data;
-   ef->data_size = size;
-   ef->sha1 = NULL;
-   ef->sha1_length = 0;
-
-   /* eet_internal_read expects the cache lock to be held when it is called */
-   LOCK_CACHE;
-   ef = eet_internal_read(ef);
-   UNLOCK_CACHE;
-   return ef;
-}
-
-EAPI const char *
-eet_file_get(Eet_File *ef)
-{
-   if (eet_check_pointer(ef)) return NULL;
-   return ef->path;
-}
-
-EAPI Eet_File *
-eet_open(const char   *file,
-         Eet_File_Mode mode)
-{
-   Eina_File *fp;
-   Eet_File *ef;
-   int file_len;
-   unsigned long int size;
-
-   if (!file)
-     return NULL;
-
-   /* find the current file handle in cache*/
-   ef = NULL;
-   LOCK_CACHE;
-   if (mode == EET_FILE_MODE_READ)
-     {
-        ef = eet_cache_find((char *)file, eet_writers, eet_writers_num);
-        if (ef)
-          {
-             eet_sync(ef);
-             ef->references++;
-             ef->delete_me_now = 1;
-             eet_internal_close(ef, EINA_TRUE);
-          }
-
-        ef = eet_cache_find((char *)file, eet_readers, eet_readers_num);
-     }
-   else if ((mode == EET_FILE_MODE_WRITE) ||
-            (mode == EET_FILE_MODE_READ_WRITE))
-     {
-        ef = eet_cache_find((char *)file, eet_readers, eet_readers_num);
-        if (ef)
-          {
-             ef->delete_me_now = 1;
-             ef->references++;
-             eet_internal_close(ef, EINA_TRUE);
-          }
-
-        ef = eet_cache_find((char *)file, eet_writers, eet_writers_num);
-     }
-
-   /* try open the file based on mode */
-   if ((mode == EET_FILE_MODE_READ) || (mode == EET_FILE_MODE_READ_WRITE))
-     {
-        /* Prevent garbage in futur comparison. */
-         fp = eina_file_open(file, EINA_FALSE);
-         if (!fp)
-           goto open_error;
-
-         size = eina_file_size_get(fp);
-
-         if (size < ((int)sizeof(int) * 3))
-           {
-              eina_file_close(fp);
-              fp = NULL;
-
-              size = 0;
-
-              goto open_error;
-           }
-
-open_error:
-         if (!fp && mode == EET_FILE_MODE_READ)
-           goto on_error;
-     }
-   else
-     {
-        if (mode != EET_FILE_MODE_WRITE)
-          return NULL;
-
-        size = 0;
-
-        fp = NULL;
-     }
-
-   /* We found one */
-   if (ef && ef->readfp != fp)
-     {
-        ef->delete_me_now = 1;
-        ef->references++;
-        eet_internal_close(ef, EINA_TRUE);
-        ef = NULL;
-     }
-
-   if (ef)
-     {
-        /* reference it up and return it */
-         if (fp)
-           eina_file_close(fp);
-
-         ef->references++;
-         UNLOCK_CACHE;
-         return ef;
-     }
-
-   file_len = strlen(file) + 1;
-
-   /* Allocate struct for eet file and have it zero'd out */
-   ef = eet_file_malloc(1);
-   if (!ef)
-     goto on_error;
-
-   /* fill some of the members */
-   INIT_FILE(ef);
-   ef->key = NULL;
-   ef->readfp = fp;
-   ef->path = eina_stringshare_add_length(file, file_len);
-   ef->magic = EET_MAGIC_FILE;
-   ef->references = 1;
-   ef->mode = mode;
-   ef->header = NULL;
-   ef->writes_pending = 0;
-   ef->delete_me_now = 0;
-   ef->data = NULL;
-   ef->data_size = 0;
-   ef->sha1 = NULL;
-   ef->sha1_length = 0;
-
-   ef->ed = (mode == EET_FILE_MODE_WRITE)
-     || (!ef->readfp && mode == EET_FILE_MODE_READ_WRITE) ?
-     eet_dictionary_add() : NULL;
-
-   if (!ef->readfp &&
-       (mode == EET_FILE_MODE_READ_WRITE || mode == EET_FILE_MODE_WRITE))
-     goto empty_file;
-
-   /* if we can't open - bail out */
-   if (eet_test_close(!ef->readfp, ef))
-     goto on_error;
-
-   /* if we opened for read or read-write */
-   if ((mode == EET_FILE_MODE_READ) || (mode == EET_FILE_MODE_READ_WRITE))
-     {
-        ef->data_size = size;
-        ef->data = eina_file_map_all(fp, EINA_FILE_SEQUENTIAL);
-        if (eet_test_close((ef->data == NULL), ef))
-          goto on_error;
-
-        ef = eet_internal_read(ef);
-        if (!ef)
-          goto on_error;
-     }
-
-empty_file:
-   /* add to cache */
-   if (ef->references == 1)
-     {
-        if (ef->mode == EET_FILE_MODE_READ)
-          eet_cache_add(ef, &eet_readers, &eet_readers_num, &eet_readers_alloc);
-        else if ((ef->mode == EET_FILE_MODE_WRITE) ||
-                 (ef->mode == EET_FILE_MODE_READ_WRITE))
-          eet_cache_add(ef, &eet_writers, &eet_writers_num, &eet_writers_alloc);
-     }
-
-   UNLOCK_CACHE;
-   return ef;
-
-on_error:
-   UNLOCK_CACHE;
-   return NULL;
-}
-
-EAPI Eet_File_Mode
-eet_mode_get(Eet_File *ef)
-{
-   /* check to see its' an eet file pointer */
-    if ((!ef) || (ef->magic != EET_MAGIC_FILE))
-      return EET_FILE_MODE_INVALID;
-    else
-      return ef->mode;
-}
-
-EAPI const void *
-eet_identity_x509(Eet_File *ef,
-                  int      *der_length)
-{
-   if (!ef->x509_der)
-     return NULL;
-
-   if (der_length)
-     *der_length = ef->x509_length;
-
-   return ef->x509_der;
-}
-
-EAPI const void *
-eet_identity_signature(Eet_File *ef,
-                       int      *signature_length)
-{
-   if (!ef->signature)
-     return NULL;
-
-   if (signature_length)
-     *signature_length = ef->signature_length;
-
-   return ef->signature;
-}
-
-EAPI const void *
-eet_identity_sha1(Eet_File *ef,
-                  int      *sha1_length)
-{
-   if (!ef->sha1)
-     ef->sha1 = eet_identity_compute_sha1(ef->data,
-                                          ef->data_size,
-                                          &ef->sha1_length);
-
-   if (sha1_length)
-     *sha1_length = ef->sha1_length;
-
-   return ef->sha1;
-}
-
-EAPI Eet_Error
-eet_identity_set(Eet_File *ef,
-                 Eet_Key  *key)
-{
-   Eet_Key *tmp;
-
-   if (!ef)
-     return EET_ERROR_BAD_OBJECT;
-
-   tmp = ef->key;
-   ef->key = key;
-   eet_identity_ref(ef->key);
-   eet_identity_unref(tmp);
-
-   /* flags that writes are pending */
-   ef->writes_pending = 1;
-
-   return EET_ERROR_NONE;
-}
-
-EAPI Eet_Error
-eet_close(Eet_File *ef)
-{
-   return eet_internal_close(ef, EINA_FALSE);
-}
-
-EAPI void *
-eet_read_cipher(Eet_File   *ef,
-                const char *name,
-                int        *size_ret,
-                const char *cipher_key)
-{
-   Eet_File_Node *efn;
-   char *data = NULL;
-   unsigned long int size = 0;
-
-   if (size_ret)
-     *size_ret = 0;
-
-   /* check to see its' an eet file pointer */
-   if (eet_check_pointer(ef))
-     return NULL;
-
-   if (!name)
-     return NULL;
-
-   if ((ef->mode != EET_FILE_MODE_READ) &&
-       (ef->mode != EET_FILE_MODE_READ_WRITE))
-     return NULL;
-
-   /* no header, return NULL */
-   if (eet_check_header(ef))
-     return NULL;
-
-   LOCK_FILE(ef);
-
-   /* hunt hash bucket */
-   efn = find_node_by_name(ef, name);
-   if (!efn)
-     goto on_error;
-
-   /* get size (uncompressed, if compressed at all) */
-   size = efn->data_size;
-
-   /* allocate data */
-   data = malloc(size);
-   if (!data)
-     goto on_error;
-
-   /* uncompressed data */
-   if (efn->compression == 0)
-     {
-        void *data_deciphered = NULL;
-        unsigned int data_deciphered_sz = 0;
-        /* if we already have the data in ram... copy that */
-
-        if (efn->ciphered && efn->size > size)
-          {
-             size = efn->size;
-             data = realloc(data, efn->size);
-          }
-
-        if (efn->data)
-          memcpy(data, efn->data, size);
-        else
-        if (!read_data_from_disk(ef, efn, data, size))
-          goto on_error;
-
-        if (efn->ciphered && cipher_key)
-          {
-             if (eet_decipher(data, efn->size, cipher_key, strlen(cipher_key),
-                              &data_deciphered, &data_deciphered_sz))
-               {
-                  if (data_deciphered)
-                    free(data_deciphered);
-
-                  goto on_error;
-               }
-
-             free(data);
-             data = data_deciphered;
-             size = data_deciphered_sz;
-          }
-     }
-   /* compressed data */
-   else
-     {
-        void *tmp_data = NULL;
-        void *data_deciphered = NULL;
-        unsigned int data_deciphered_sz = 0;
-        int free_tmp = 0;
-        int compr_size = efn->size;
-        uLongf dlen;
-
-        /* if we already have the data in ram... copy that */
-        if (efn->data)
-          tmp_data = efn->data;
-        else
-          {
-             tmp_data = malloc(compr_size);
-             if (!tmp_data)
-               goto on_error;
-
-             free_tmp = 1;
-
-             if (!read_data_from_disk(ef, efn, tmp_data, compr_size))
-               {
-                  free(tmp_data);
-                  goto on_error;
-               }
-          }
-
-        if (efn->ciphered && cipher_key)
-          {
-             if (eet_decipher(tmp_data, compr_size, cipher_key,
-                              strlen(cipher_key), &data_deciphered,
-                              &data_deciphered_sz))
-               {
-                  if (free_tmp)
-                    free(tmp_data);
-
-                  if (data_deciphered)
-                    free(data_deciphered);
-
-                  goto on_error;
-               }
-
-             if (free_tmp)
-               free(tmp_data);
-             free_tmp = 1;
-             tmp_data = data_deciphered;
-             compr_size = data_deciphered_sz;
-          }
-
-        /* decompress it */
-        dlen = size;
-        if (uncompress((Bytef *)data, &dlen,
-                       tmp_data, (uLongf)compr_size))
-          {
-             if (free_tmp)
-               free(tmp_data);
-             goto on_error;
-          }
-
-        if (free_tmp)
-          free(tmp_data);
-     }
-
-   UNLOCK_FILE(ef);
-
-   /* handle alias */
-   if (efn->alias)
-     {
-        void *tmp;
-
-        if (data[size - 1] != '\0')
-          goto on_error;
-
-        tmp = eet_read_cipher(ef, data, size_ret, cipher_key);
-
-        free(data);
-
-        data = tmp;
-     }
-   else
-   /* fill in return values */
-   if (size_ret)
-     *size_ret = size;
-
-   return data;
-
-on_error:
-   UNLOCK_FILE(ef);
-   free(data);
-   return NULL;
-}
-
-EAPI void *
-eet_read(Eet_File   *ef,
-         const char *name,
-         int        *size_ret)
-{
-   return eet_read_cipher(ef, name, size_ret, NULL);
-}
-
-EAPI const void *
-eet_read_direct(Eet_File   *ef,
-                const char *name,
-                int        *size_ret)
-{
-   Eet_File_Node *efn;
-   const char *data = NULL;
-   int size = 0;
-
-   if (size_ret)
-     *size_ret = 0;
-
-   /* check to see its' an eet file pointer */
-   if (eet_check_pointer(ef))
-     return NULL;
-
-   if (!name)
-     return NULL;
-
-   if ((ef->mode != EET_FILE_MODE_READ) &&
-       (ef->mode != EET_FILE_MODE_READ_WRITE))
-     return NULL;
-
-   /* no header, return NULL */
-   if (eet_check_header(ef))
-     return NULL;
-
-   LOCK_FILE(ef);
-
-   /* hunt hash bucket */
-   efn = find_node_by_name(ef, name);
-   if (!efn)
-     goto on_error;
-
-   /* trick to detect data in memory instead of mmaped from disk */
-   if (efn->offset > ef->data_size && !efn->data)
-     goto on_error;
-
-   /* get size (uncompressed, if compressed at all) */
-   size = efn->data_size;
-
-   if (efn->alias)
-     {
-        data = efn->data ? efn->data : ef->data + efn->offset;
-
-        /* handle alias case */
-        if (efn->compression)
-          {
-             char *tmp;
-             int compr_size = efn->size;
-             uLongf dlen;
-
-             tmp = alloca(sizeof (compr_size));
-             dlen = size;
-
-             if (uncompress((Bytef *)tmp, &dlen, (Bytef *)data,
-                            (uLongf)compr_size))
-               goto on_error;
-
-             if (tmp[compr_size - 1] != '\0')
-               goto on_error;
-
-             UNLOCK_FILE(ef);
-
-             return eet_read_direct(ef, tmp, size_ret);
-          }
-
-        if (!data)
-          goto on_error;
-
-        if (data[size - 1] != '\0')
-          goto on_error;
-
-        UNLOCK_FILE(ef);
-
-        return eet_read_direct(ef, data, size_ret);
-     }
-   else
-   /* uncompressed data */
-   if (efn->compression == 0
-       && efn->ciphered == 0)
-     data = efn->data ? efn->data : ef->data + efn->offset;  /* compressed data */
-   else
-     data = NULL;
-
-   /* fill in return values */
-   if (size_ret)
-     *size_ret = size;
-
-   UNLOCK_FILE(ef);
-
-   return data;
-
-on_error:
-   UNLOCK_FILE(ef);
-   return NULL;
-}
-
-EAPI const char *
-eet_alias_get(Eet_File   *ef,
-              const char *name)
-{
-   Eet_File_Node *efn;
-   const char *data = NULL;
-   int size = 0;
-
-   /* check to see its' an eet file pointer */
-   if (eet_check_pointer(ef))
-     return NULL;
-
-   if (!name)
-     return NULL;
-
-   if ((ef->mode != EET_FILE_MODE_READ) &&
-       (ef->mode != EET_FILE_MODE_READ_WRITE))
-     return NULL;
-
-   /* no header, return NULL */
-   if (eet_check_header(ef))
-     return NULL;
-
-   LOCK_FILE(ef);
-
-   /* hunt hash bucket */
-   efn = find_node_by_name(ef, name);
-   if (!efn)
-     goto on_error;
-
-   /* trick to detect data in memory instead of mmaped from disk */
-   if (efn->offset > ef->data_size && !efn->data)
-     goto on_error;
-
-   /* get size (uncompressed, if compressed at all) */
-   size = efn->data_size;
-
-   if (!efn->alias) return NULL;
-   data = efn->data ? efn->data : ef->data + efn->offset;
-
-   /* handle alias case */
-   if (efn->compression)
-     {
-        char *tmp;
-        int compr_size = efn->size;
-        uLongf dlen;
-
-        tmp = alloca(sizeof (compr_size));
-        dlen = size;
-
-        if (uncompress((Bytef *)tmp, &dlen, (Bytef *)data,
-                       (uLongf)compr_size))
-          goto on_error;
-
-        if (tmp[compr_size - 1] != '\0')
-          goto on_error;
-
-        UNLOCK_FILE(ef);
-
-        return eina_stringshare_add(tmp);
-     }
-
-   if (!data)
-     goto on_error;
-
-   if (data[size - 1] != '\0')
-     goto on_error;
-
-   UNLOCK_FILE(ef);
-
-   return eina_stringshare_add(data);
-
-on_error:
-   UNLOCK_FILE(ef);
-   return NULL;
-}
-
-EAPI Eina_Bool
-eet_alias(Eet_File   *ef,
-          const char *name,
-          const char *destination,
-          int         comp)
-{
-   Eet_File_Node *efn;
-   void *data2;
-   Eina_Bool exists_already = EINA_FALSE;
-   int data_size;
-   int hash;
-
-   /* check to see its' an eet file pointer */
-   if (eet_check_pointer(ef))
-     return EINA_FALSE;
-
-   if ((!name) || (!destination))
-     return EINA_FALSE;
-
-   if ((ef->mode != EET_FILE_MODE_WRITE) &&
-       (ef->mode != EET_FILE_MODE_READ_WRITE))
-     return EINA_FALSE;
-
-   LOCK_FILE(ef);
-
-   if (!ef->header)
-     {
-        /* allocate header */
-         ef->header = eet_file_header_calloc(1);
-         if (!ef->header)
-           goto on_error;
-
-         ef->header->magic = EET_MAGIC_FILE_HEADER;
-         /* allocate directory block in ram */
-         ef->header->directory = eet_file_directory_calloc(1);
-         if (!ef->header->directory)
-           {
-              eet_file_header_mp_free(ef->header);
-              ef->header = NULL;
-              goto on_error;
-           }
-
-         /* 8 bit hash table (256 buckets) */
-         ef->header->directory->size = 8;
-         /* allocate base hash table */
-         ef->header->directory->nodes =
-           calloc(1, sizeof(Eet_File_Node *) *
-                  (1 << ef->header->directory->size));
-         if (!ef->header->directory->nodes)
-           {
-              eet_file_directory_mp_free(ef->header->directory);
-              ef->header = NULL;
-              goto on_error;
-           }
-     }
-
-   /* figure hash bucket */
-   hash = _eet_hash_gen(name, ef->header->directory->size);
-
-   data_size = comp ?
-     12 + (((strlen(destination) + 1) * 101) / 100)
-     : strlen(destination) + 1;
-
-   data2 = malloc(data_size);
-   if (!data2)
-     goto on_error;
-
-   /* if we want to compress */
-   if (comp)
-     {
-        uLongf buflen;
-
-        /* compress the data with max compression */
-        buflen = (uLongf)data_size;
-        if (compress2((Bytef *)data2, &buflen, (Bytef *)destination,
-                      (uLong)strlen(destination) + 1,
-                      Z_BEST_COMPRESSION) != Z_OK)
-          {
-             free(data2);
-             goto on_error;
-          }
-
-        /* record compressed chunk size */
-        data_size = (int)buflen;
-        if (data_size < 0 || data_size >= (int)(strlen(destination) + 1))
-          {
-             comp = 0;
-             data_size = strlen(destination) + 1;
-          }
-        else
-          {
-             void *data3;
-
-             data3 = realloc(data2, data_size);
-             if (data3)
-               data2 = data3;
-          }
-     }
-
-   if (!comp)
-     memcpy(data2, destination, data_size);
-
-   /* Does this node already exist? */
-   for (efn = ef->header->directory->nodes[hash]; efn; efn = efn->next)
-     {
-        /* if it matches */
-         if ((efn->name) && (eet_string_match(efn->name, name)))
-           {
-              free(efn->data);
-              efn->alias = 1;
-              efn->ciphered = 0;
-              efn->compression = !!comp;
-              efn->size = data_size;
-              efn->data_size = strlen(destination) + 1;
-              efn->data = data2;
-     /* Put the offset above the limit to avoid direct access */
-              efn->offset = ef->data_size + 1;
-              exists_already = EINA_TRUE;
-
-              break;
-           }
-     }
-   if (!exists_already)
-     {
-        efn = eet_file_node_malloc(1);
-        if (!efn)
-          {
-             free(data2);
-             goto on_error;
-          }
-
-        efn->name = strdup(name);
-        efn->name_size = strlen(efn->name) + 1;
-        efn->free_name = 1;
-
-        efn->next = ef->header->directory->nodes[hash];
-        ef->header->directory->nodes[hash] = efn;
-        /* Put the offset above the limit to avoid direct access */
-        efn->offset = ef->data_size + 1;
-        efn->alias = 1;
-        efn->ciphered = 0;
-        efn->compression = !!comp;
-        efn->size = data_size;
-        efn->data_size = strlen(destination) + 1;
-        efn->data = data2;
-     }
-
-   /* flags that writes are pending */
-   ef->writes_pending = 1;
-
-   UNLOCK_FILE(ef);
-   return EINA_TRUE;
-
-on_error:
-   UNLOCK_FILE(ef);
-   return EINA_FALSE;
-}
-
-EAPI int
-eet_write_cipher(Eet_File   *ef,
-                 const char *name,
-                 const void *data,
-                 int         size,
-                 int         comp,
-                 const char *cipher_key)
-{
-   Eet_File_Node *efn;
-   void *data2 = NULL;
-   int exists_already = 0;
-   int data_size;
-   int hash;
-
-   /* check to see its' an eet file pointer */
-   if (eet_check_pointer(ef))
-     return 0;
-
-   if ((!name) || (!data) || (size <= 0))
-     return 0;
-
-   if ((ef->mode != EET_FILE_MODE_WRITE) &&
-       (ef->mode != EET_FILE_MODE_READ_WRITE))
-     return 0;
-
-   LOCK_FILE(ef);
-
-   if (!ef->header)
-     {
-        /* allocate header */
-         ef->header = eet_file_header_calloc(1);
-         if (!ef->header)
-           goto on_error;
-
-         ef->header->magic = EET_MAGIC_FILE_HEADER;
-         /* allocate directory block in ram */
-         ef->header->directory = eet_file_directory_calloc(1);
-         if (!ef->header->directory)
-           {
-              eet_file_header_mp_free(ef->header);
-              ef->header = NULL;
-              goto on_error;
-           }
-
-         /* 8 bit hash table (256 buckets) */
-         ef->header->directory->size = 8;
-         /* allocate base hash table */
-         ef->header->directory->nodes =
-           calloc(1, sizeof(Eet_File_Node *) *
-                  (1 << ef->header->directory->size));
-         if (!ef->header->directory->nodes)
-           {
-              eet_file_directory_mp_free(ef->header->directory);
-              ef->header = NULL;
-              goto on_error;
-           }
-     }
-
-   /* figure hash bucket */
-   hash = _eet_hash_gen(name, ef->header->directory->size);
-
-   data_size = comp ? 12 + ((size * 101) / 100) : size;
-
-   if (comp || !cipher_key)
-     {
-        data2 = malloc(data_size);
-        if (!data2)
-          goto on_error;
-     }
-
-   /* if we want to compress */
-   if (comp)
-     {
-        uLongf buflen;
-
-        /* compress the data with max compression */
-        buflen = (uLongf)data_size;
-        if (compress2((Bytef *)data2, &buflen, (Bytef *)data,
-                      (uLong)size, Z_BEST_COMPRESSION) != Z_OK)
-          {
-             free(data2);
-             goto on_error;
-          }
-
-        /* record compressed chunk size */
-        data_size = (int)buflen;
-        if (data_size < 0 || data_size >= size)
-          {
-             comp = 0;
-             data_size = size;
-          }
-        else
-          {
-             void *data3;
-
-             data3 = realloc(data2, data_size);
-             if (data3)
-               data2 = data3;
-          }
-     }
-
-   if (cipher_key)
-     {
-        void *data_ciphered = NULL;
-        unsigned int data_ciphered_sz = 0;
-        const void *tmp;
-
-        tmp = comp ? data2 : data;
-        if (!eet_cipher(tmp, data_size, cipher_key, strlen(cipher_key),
-                        &data_ciphered, &data_ciphered_sz))
-          {
-             if (data2)
-               free(data2);
-
-             data2 = data_ciphered;
-             data_size = data_ciphered_sz;
-          }
-        else
-          {
-             if (data_ciphered)
-               free(data_ciphered);
-
-             cipher_key = NULL;
-          }
-     }
-   else
-   if (!comp)
-     memcpy(data2, data, size);
-
-   /* Does this node already exist? */
-   for (efn = ef->header->directory->nodes[hash]; efn; efn = efn->next)
-     {
-        /* if it matches */
-         if ((efn->name) && (eet_string_match(efn->name, name)))
-           {
-              free(efn->data);
-              efn->alias = 0;
-              efn->ciphered = cipher_key ? 1 : 0;
-              efn->compression = !!comp;
-              efn->size = data_size;
-              efn->data_size = size;
-              efn->data = data2;
-     /* Put the offset above the limit to avoid direct access */
-              efn->offset = ef->data_size + 1;
-              exists_already = 1;
-              break;
-           }
-     }
-   if (!exists_already)
-     {
-        efn = eet_file_node_malloc(1);
-        if (!efn)
-          {
-             free(data2);
-             goto on_error;
-          }
-
-        efn->name = strdup(name);
-        efn->name_size = strlen(efn->name) + 1;
-        efn->free_name = 1;
-
-        efn->next = ef->header->directory->nodes[hash];
-        ef->header->directory->nodes[hash] = efn;
-        /* Put the offset above the limit to avoid direct access */
-        efn->offset = ef->data_size + 1;
-        efn->alias = 0;
-        efn->ciphered = cipher_key ? 1 : 0;
-        efn->compression = !!comp;
-        efn->size = data_size;
-        efn->data_size = size;
-        efn->data = data2;
-     }
-
-   /* flags that writes are pending */
-   ef->writes_pending = 1;
-   UNLOCK_FILE(ef);
-   return data_size;
-
-on_error:
-   UNLOCK_FILE(ef);
-   return 0;
-}
-
-EAPI int
-eet_write(Eet_File   *ef,
-          const char *name,
-          const void *data,
-          int         size,
-          int         comp)
-{
-   return eet_write_cipher(ef, name, data, size, comp, NULL);
-}
-
-EAPI int
-eet_delete(Eet_File   *ef,
-           const char *name)
-{
-   Eet_File_Node *efn;
-   Eet_File_Node *pefn;
-   int hash;
-   int exists_already = 0;
-
-   /* check to see its' an eet file pointer */
-   if (eet_check_pointer(ef))
-     return 0;
-
-   if (!name)
-     return 0;
-
-   /* deleting keys is only possible in RW or WRITE mode */
-   if (ef->mode == EET_FILE_MODE_READ)
-     return 0;
-
-   if (eet_check_header(ef))
-     return 0;
-
-   LOCK_FILE(ef);
-
-   /* figure hash bucket */
-   hash = _eet_hash_gen(name, ef->header->directory->size);
-
-   /* Does this node already exist? */
-   for (pefn = NULL, efn = ef->header->directory->nodes[hash];
-        efn;
-        pefn = efn, efn = efn->next)
-     {
-        /* if it matches */
-         if (eet_string_match(efn->name, name))
-           {
-              if (efn->data)
-                free(efn->data);
-
-              if (!pefn)
-                ef->header->directory->nodes[hash] = efn->next;
-              else
-                pefn->next = efn->next;
-
-              if (efn->free_name)
-                free(efn->name);
-
-              eet_file_node_mp_free(efn);
-              exists_already = 1;
-              break;
-           }
-     }
-   /* flags that writes are pending */
-   if (exists_already)
-     ef->writes_pending = 1;
-
-   UNLOCK_FILE(ef);
-
-   /* update access time */
-   return exists_already;
-}
-
-EAPI Eet_Dictionary *
-eet_dictionary_get(Eet_File *ef)
-{
-   if (eet_check_pointer(ef))
-     return NULL;
-
-   return ef->ed;
-}
-
-EAPI char **
-eet_list(Eet_File   *ef,
-         const char *glob,
-         int        *count_ret)
-{
-   Eet_File_Node *efn;
-   char **list_ret = NULL;
-   int list_count = 0;
-   int list_count_alloc = 0;
-   int i, num;
-
-   /* check to see its' an eet file pointer */
-   if (eet_check_pointer(ef) || eet_check_header(ef) ||
-       (!glob) ||
-       ((ef->mode != EET_FILE_MODE_READ) &&
-        (ef->mode != EET_FILE_MODE_READ_WRITE)))
-     {
-        if (count_ret)
-          *count_ret = 0;
-
-        return NULL;
-     }
-
-   if (!strcmp(glob, "*"))
-     glob = NULL;
-
-   LOCK_FILE(ef);
-
-   /* loop through all entries */
-   num = (1 << ef->header->directory->size);
-   for (i = 0; i < num; i++)
-     {
-        for (efn = ef->header->directory->nodes[i]; efn; efn = efn->next)
-          {
-             /* if the entry matches the input glob
-              * check for * explicitly, because on some systems, * isn't well
-              * supported
-              */
-               if ((!glob) || !fnmatch(glob, efn->name, 0))
-                 {
-     /* add it to our list */
-                     list_count++;
-
-     /* only realloc in 32 entry chunks */
-                     if (list_count > list_count_alloc)
-                       {
-                          char **new_list = NULL;
-
-                          list_count_alloc += 64;
-                          new_list =
-                            realloc(list_ret, list_count_alloc * (sizeof(char *)));
-                          if (!new_list)
-                            {
-                               free(list_ret);
-
-                               goto on_error;
-                            }
-
-                          list_ret = new_list;
-                       }
-
-     /* put pointer of name string in */
-                     list_ret[list_count - 1] = efn->name;
-                 }
-          }
-     }
-
-   UNLOCK_FILE(ef);
-
-   /* return count and list */
-   if (count_ret)
-     *count_ret = list_count;
-
-   return list_ret;
-
-on_error:
-   UNLOCK_FILE(ef);
-
-   if (count_ret)
-     *count_ret = 0;
-
-   return NULL;
-}
-
-EAPI int
-eet_num_entries(Eet_File *ef)
-{
-   int i, num, ret = 0;
-   Eet_File_Node *efn;
-
-   /* check to see its' an eet file pointer */
-   if (eet_check_pointer(ef) || eet_check_header(ef) ||
-       ((ef->mode != EET_FILE_MODE_READ) &&
-        (ef->mode != EET_FILE_MODE_READ_WRITE)))
-     return -1;
-
-   LOCK_FILE(ef);
-
-   /* loop through all entries */
-   num = (1 << ef->header->directory->size);
-   for (i = 0; i < num; i++)
-     {
-        for (efn = ef->header->directory->nodes[i]; efn; efn = efn->next)
-          ret++;
-     }
-
-   UNLOCK_FILE(ef);
-
-   return ret;
-}
-
-static Eet_File_Node *
-find_node_by_name(Eet_File   *ef,
-                  const char *name)
-{
-   Eet_File_Node *efn;
-   int hash;
-
-   /* get hash bucket this should be in */
-   hash = _eet_hash_gen(name, ef->header->directory->size);
-
-   for (efn = ef->header->directory->nodes[hash]; efn; efn = efn->next)
-     {
-        if (eet_string_match(efn->name, name))
-          return efn;
-     }
-
-   return NULL;
-}
-
-static int
-read_data_from_disk(Eet_File      *ef,
-                    Eet_File_Node *efn,
-                    void          *buf,
-                    int            len)
-{
-   if (efn->offset > ef->data_size)
-     return 0;
-
-   if (!ef->data)
-     return 0;
-
-   if ((efn->offset + len) > ef->data_size)
-     return 0;
-
-   memcpy(buf, ef->data + efn->offset, len);
-
-   return len;
-}
-
diff --git a/libraries/eet/src/lib/eet_node.c b/libraries/eet/src/lib/eet_node.c
deleted file mode 100644
index 11d7cc0..0000000
--- a/libraries/eet/src/lib/eet_node.c
+++ /dev/null
@@ -1,797 +0,0 @@
-#ifdef HAVE_CONFIG_H
-# include <config.h>
-#endif /* ifdef HAVE_CONFIG_H */
-
-#include <string.h>
-#include <stdio.h>
-
-#ifdef HAVE_EVIL
-# include <Evil.h>
-#endif /* ifdef HAVE_EVIL */
-
-#include <Eina.h>
-
-#include "Eet.h"
-#include "Eet_private.h"
-
-static Eina_Mempool *_eet_node_mp = NULL;
-
-Eet_Node *
-eet_node_new(void)
-{
-   Eet_Node *result;
-
-   result = eina_mempool_malloc(_eet_node_mp, sizeof (Eet_Node));
-   if (!result)
-     return NULL;
-
-   memset(result, 0, sizeof (Eet_Node));
-   return result;
-}
-
-void
-eet_node_free(Eet_Node *node)
-{
-   eina_mempool_free(_eet_node_mp, node);
-}
-
-static Eet_Node *
-_eet_node_new(const char *name,
-              int         type)
-{
-   Eet_Node *n;
-
-   n = eet_node_new();
-   if (!n)
-     return NULL;
-
-   n->type = type;
-   n->name = eina_stringshare_add(name);
-
-   return n;
-}
-
-static void
-_eet_node_append(Eet_Node  *n,
-                 Eina_List *nodes)
-{
-   Eet_Node *value;
-   Eina_List *l;
-
-   EINA_LIST_REVERSE_FOREACH(nodes, l, value)
-     {
-        value->next = n->values;
-        n->values = value;
-     }
-}
-
-#define EET_NODE_NEW(Eet_type, Name, Value, Type)         \
-  EAPI Eet_Node *                                         \
-  eet_node_ ## Name ## _new(const char *name, Type Value) \
-  {                                                       \
-     Eet_Node *n;                                         \
-                                                          \
-     n = _eet_node_new(name, Eet_type);                   \
-     if (!n) { return NULL; }                             \
-                                                          \
-     n->data.value.Value = Value;                         \
-                                                          \
-     return n;                                            \
-  }
-
-#define EET_NODE_STR_NEW(Eet_type, Name, Value, Type)     \
-  EAPI Eet_Node *                                         \
-  eet_node_ ## Name ## _new(const char *name, Type Value) \
-  {                                                       \
-     Eet_Node *n;                                         \
-                                                          \
-     n = _eet_node_new(name, Eet_type);                   \
-     if (!n) { return NULL; }                             \
-                                                          \
-     n->data.value.Value = eina_stringshare_add(Value);   \
-                                                          \
-     return n;                                            \
-  }
-
-EET_NODE_NEW(EET_T_CHAR, char, c, char)
-EET_NODE_NEW(EET_T_SHORT, short, s, short)
-EET_NODE_NEW(EET_T_INT, int, i, int)
-EET_NODE_NEW(EET_T_LONG_LONG, long_long, l, long long)
-EET_NODE_NEW(EET_T_FLOAT, float, f, float)
-EET_NODE_NEW(EET_T_DOUBLE, double, d, double)
-EET_NODE_NEW(EET_T_UCHAR, unsigned_char, uc, unsigned char)
-EET_NODE_NEW(EET_T_USHORT, unsigned_short, us, unsigned short)
-EET_NODE_NEW(EET_T_UINT, unsigned_int, ui, unsigned int)
-EET_NODE_NEW(EET_T_ULONG_LONG, unsigned_long_long, ul, unsigned long long)
-EET_NODE_STR_NEW(EET_T_STRING, string, str, const char *)
-EET_NODE_STR_NEW(EET_T_INLINED_STRING, inlined_string, str, const char *)
-
-Eet_Node *
-eet_node_null_new(const char *name)
-{
-   Eet_Node *n;
-
-   n = _eet_node_new(name, EET_T_NULL);
-   if (!n)
-     return NULL;
-
-   n->data.value.str = NULL;
-
-   return n;
-}
-
-Eet_Node *
-eet_node_list_new(const char *name,
-                  Eina_List  *nodes)
-{
-   Eet_Node *n;
-
-   n = _eet_node_new(name, EET_G_LIST);
-   if (!n)
-     return NULL;
-
-   _eet_node_append(n, nodes);
-
-   return n;
-}
-
-Eet_Node *
-eet_node_array_new(const char *name,
-                   int         count,
-                   Eina_List  *nodes)
-{
-   Eet_Node *n;
-
-   n = _eet_node_new(name, EET_G_ARRAY);
-   if (!n)
-     return NULL;
-
-   n->count = count;
-
-   _eet_node_append(n, nodes);
-
-   return n;
-}
-
-Eet_Node *
-eet_node_var_array_new(const char *name,
-                       Eina_List  *nodes)
-{
-   Eet_Node *n;
-
-   n = _eet_node_new(name, EET_G_VAR_ARRAY);
-   if (!n)
-     return NULL;
-
-   n->count = eina_list_count(nodes);
-
-   _eet_node_append(n, nodes);
-
-   return n;
-}
-
-Eet_Node *
-eet_node_hash_new(const char *name,
-                  const char *key,
-                  Eet_Node   *node)
-{
-   Eina_List *nodes;
-   Eet_Node *n;
-
-   if (!node)
-     return NULL;
-
-   n = _eet_node_new(name, EET_G_HASH);
-   if (!n)
-     return NULL;
-
-   n->key = eina_stringshare_add(key);
-   nodes = eina_list_append(NULL, node);
-
-   _eet_node_append(n, nodes);
-
-   return n;
-}
-
-Eet_Node *
-eet_node_struct_new(const char *name,
-                    Eina_List  *nodes)
-{
-   Eet_Node *n;
-
-   n = _eet_node_new(name, EET_G_UNKNOWN);
-   if (!n)
-     return NULL;
-
-   _eet_node_append(n, nodes);
-
-   return n;
-}
-
-Eet_Node *
-eet_node_struct_child_new(const char *parent,
-                          Eet_Node   *child)
-{
-   Eet_Node *n;
-
-   if (!child) return NULL;
-
-   if (child->type != EET_G_UNKNOWN)
-     return child;
-
-   n = _eet_node_new(parent, EET_G_UNKNOWN);
-   if (!n)
-     return NULL;
-
-   _eet_node_append(n, eina_list_prepend(NULL, child));
-
-   return n;
-}
-
-Eet_Node *
-eet_node_children_get(Eet_Node *node)
-{
-   if (!node) return NULL;
-   return node->values;
-}
-
-Eet_Node *
-eet_node_next_get(Eet_Node *node)
-{
-   if (!node) return NULL;
-   return node->next;
-}
-
-Eet_Node *
-eet_node_parent_get(Eet_Node *node)
-{
-   if (!node) return NULL;
-   return node->parent;
-}
-
-void
-eet_node_list_append(Eet_Node   *parent,
-                     const char *name,
-                     Eet_Node   *child)
-{
-   const char *tmp;
-   Eet_Node *nn;
-
-   if ((!parent) || (!child)) return;
-   tmp = eina_stringshare_add(name);
-
-   for (nn = parent->values; nn; nn = nn->next)
-     if (nn->name == tmp && nn->type == EET_G_LIST)
-       {
-          Eet_Node *n;
-
-          if (!nn->values)
-            nn->values = child;
-          else
-            {
-               for (n = nn->values; n->next; n = n->next)
-                 ;
-               n->next = child;
-            }
-
-          child->next = NULL;
-
-          eina_stringshare_del(tmp);
-
-          return;
-       }
-
-   /* No list found, so create it. */
-   nn = eet_node_list_new(tmp, eina_list_append(NULL, child));
-
-   /* And add it to the parent. */
-   nn->next = parent->values;
-   parent->values = nn;
-
-   eina_stringshare_del(tmp);
-}
-
-void
-eet_node_struct_append(Eet_Node   *parent,
-                       const char *name,
-                       Eet_Node   *child)
-{
-   const char *tmp;
-   Eet_Node *prev;
-   Eet_Node *nn;
-
-   if ((!parent) || (!child)) return;
-   if (parent->type != EET_G_UNKNOWN)
-     {
-        ERR("[%s] is not a structure. Will not insert [%s] in it",
-            parent->name,
-            name);
-        eet_node_del(child);
-        return;
-     }
-
-   tmp = eina_stringshare_add(name);
-
-   for (prev = NULL, nn = parent->values; nn; prev = nn, nn = nn->next)
-     if (nn->name == tmp && nn->type == child->type)
-       {
-          if (prev)
-            prev->next = nn->next;
-          else
-            parent->values = nn->next;
-
-          nn->next = NULL;
-          eet_node_del(nn);
-
-          break;
-       }
-
-   if (prev)
-     {
-        prev->next = child;
-        child->next = NULL;
-     }
-   else
-     {
-        child->next = NULL;
-        parent->values = child;
-     }
-
-   eina_stringshare_del(tmp);
-}
-
-void
-eet_node_hash_add(Eet_Node   *parent,
-                  const char *name,
-                  const char *key,
-                  Eet_Node   *child)
-{
-   Eet_Node *nn;
-
-   if ((!parent) || (!child)) return;
-
-   /* No list found, so create it. */
-   nn = eet_node_hash_new(name, key, child);
-
-   /* And add it to the parent. */
-   nn->next = parent->values;
-   parent->values = nn;
-}
-
-int
-eet_node_type_get(Eet_Node *node)
-{
-   if (!node) return EET_T_UNKNOW;
-   return node->type;
-}
-
-Eet_Node_Data *
-eet_node_value_get(Eet_Node *node)
-{
-   if (!node) return NULL;
-   return &node->data;
-}
-
-const char *
-eet_node_name_get(Eet_Node *node)
-{
-   if (!node) return NULL;
-   return node->name;
-}
-
-void
-eet_node_del(Eet_Node *n)
-{
-   Eet_Node *nn;
-   Eet_Node *tmp;
-
-   if (!n)
-     return;
-
-   switch (n->type)
-     {
-      case EET_G_HASH:
-        eina_stringshare_del(n->key);
-
-      case EET_G_UNKNOWN:
-      case EET_G_VAR_ARRAY:
-      case EET_G_ARRAY:
-      case EET_G_LIST:
-        for (nn = n->values; nn; )
-          {
-             tmp = nn;
-             nn = nn->next;
-             eet_node_del(tmp);
-          }
-        break;
-
-      case EET_T_STRING:
-      case EET_T_INLINED_STRING:
-        eina_stringshare_del(n->data.value.str);
-        break;
-
-      case EET_T_CHAR:
-      case EET_T_SHORT:
-      case EET_T_INT:
-      case EET_T_LONG_LONG:
-      case EET_T_FLOAT:
-      case EET_T_DOUBLE:
-      case EET_T_UCHAR:
-      case EET_T_USHORT:
-      case EET_T_UINT:
-        break;
-     }
-
-   eina_stringshare_del(n->name);
-   eet_node_free(n);
-}
-
-static const char *eet_node_dump_g_name[6] = {
-   "struct",
-   "array",
-   "var_array",
-   "list",
-   "hash",
-   "???"
-};
-
-static const char *eet_node_dump_t_name[14][2] = {
-   { "???: ", "???" },
-   { "char: ", "%hhi" },
-   { "short: ", "%hi" },
-   { "int: ", "%i" },
-   { "long_long: ", "%lli" },
-   { "float: ", "%1.25f" },
-   { "double: ", "%1.25f" },
-   { "uchar: ", "%hhu" },
-   { "ushort: ", "%i" },
-   { "uint: ", "%u" },
-   { "ulong_long: ", "%llu" },
-   { "null", "" }
-};
-
-static void
-eet_node_dump_level(int               level,
-                    Eet_Dump_Callback dumpfunc,
-                    void             *dumpdata)
-{
-   int i;
-
-   for (i = 0; i < level; i++) dumpfunc(dumpdata, "  ");
-}
-
-static char *
-eet_node_string_escape(const char *str)
-{
-   char *s, *sp;
-   const char *strp;
-   int sz = 0;
-
-   for (strp = str; *strp; strp++)
-     {
-        if (*strp == '\"')
-          sz += 2;
-        else if (*strp == '\\')
-          sz += 2;
-        else if (*strp == '\n')
-          sz += 2;
-        else
-          sz += 1;
-     }
-   s = malloc(sz + 1);
-   if (!s)
-     return NULL;
-
-   for (strp = str, sp = s; *strp; strp++, sp++)
-     {
-        if (*strp == '\"'
-            || *strp == '\\'
-            || *strp == '\n')
-          {
-             *sp = '\\';
-             sp++;
-          }
-
-        if (*strp == '\n')
-          *sp = 'n';
-        else
-          *sp = *strp;
-     }
-   *sp = 0;
-   return s;
-}
-
-static void
-eet_node_dump_string_escape(void             *dumpdata,
-                            Eet_Dump_Callback dumpfunc,
-                            const char       *str)
-{
-   char *s;
-
-   s = eet_node_string_escape(str);
-   if (!s)
-     return;
-
-   dumpfunc(dumpdata, s);
-   free(s);
-}
-
-static void
-eet_node_dump_simple_type(Eet_Node         *n,
-                          int               level,
-                          Eet_Dump_Callback dumpfunc,
-                          void             *dumpdata)
-{
-   const char *type_name = NULL;
-   char tbuf[256];
-
-   eet_node_dump_level(level, dumpfunc, dumpdata);
-   dumpfunc(dumpdata, "value \"");
-   eet_node_dump_string_escape(dumpdata, dumpfunc, n->name);
-   dumpfunc(dumpdata, "\" ");
-
-#ifdef EET_T_TYPE
-# undef EET_T_TYPE
-#endif /* ifdef EET_T_TYPE */
-
-#define EET_T_TYPE(Eet_Type, Type)                        \
-case Eet_Type:                                            \
-{                                                         \
-   dumpfunc(dumpdata, eet_node_dump_t_name[Eet_Type][0]); \
-   snprintf(tbuf,                                         \
-            sizeof (tbuf),                                \
-            eet_node_dump_t_name[Eet_Type][1],            \
-            n->data.value.Type);                          \
-   dumpfunc(dumpdata, tbuf);                              \
-   break;                                                 \
-}
-
-   switch (n->type)
-     {
-        EET_T_TYPE(EET_T_CHAR, c);
-        EET_T_TYPE(EET_T_SHORT, s);
-        EET_T_TYPE(EET_T_INT, i);
-        EET_T_TYPE(EET_T_LONG_LONG, l);
-        EET_T_TYPE(EET_T_FLOAT, f);
-        EET_T_TYPE(EET_T_DOUBLE, d);
-        EET_T_TYPE(EET_T_UCHAR, uc);
-        EET_T_TYPE(EET_T_USHORT, us);
-        EET_T_TYPE(EET_T_UINT, ui);
-        EET_T_TYPE(EET_T_ULONG_LONG, ul);
-
-      case EET_T_INLINED_STRING:
-        type_name = "inlined: \"";
-
-      case EET_T_STRING:
-        if (!type_name)
-          type_name = "string: \"";
-
-        dumpfunc(dumpdata, type_name);
-        eet_node_dump_string_escape(dumpdata, dumpfunc, n->data.value.str);
-        dumpfunc(dumpdata, "\"");
-        break;
-
-      case EET_T_NULL:
-        dumpfunc(dumpdata, "null");
-        break;
-
-      default:
-        dumpfunc(dumpdata, "???: ???");
-        break;
-     }
-
-   dumpfunc(dumpdata, ";\n");
-}
-
-static void
-eet_node_dump_group_start(int               level,
-                          Eet_Dump_Callback dumpfunc,
-                          void             *dumpdata,
-                          int               group_type,
-                          const char       *name)
-{
-   int chnk_type;
-
-   chnk_type = (group_type >= EET_G_UNKNOWN && group_type <= EET_G_HASH) ?
-     group_type : EET_G_LAST;
-
-   eet_node_dump_level(level, dumpfunc, dumpdata);
-   dumpfunc(dumpdata, "group \"");
-   eet_node_dump_string_escape(dumpdata, dumpfunc, name);
-   dumpfunc(dumpdata, "\" ");
-
-   dumpfunc(dumpdata, eet_node_dump_g_name[chnk_type - EET_G_UNKNOWN]);
-   dumpfunc(dumpdata, " {\n");
-}
-
-static void
-eet_node_dump_group_end(int               level,
-                        Eet_Dump_Callback dumpfunc,
-                        void             *dumpdata)
-{
-   eet_node_dump_level(level, dumpfunc, dumpdata);
-   dumpfunc(dumpdata, "}\n");
-}
-
-void
-eet_node_dump(Eet_Node         *n,
-              int               dumplevel,
-              Eet_Dump_Callback dumpfunc,
-              void             *dumpdata)
-{
-   Eet_Node *it;
-
-   if (!n)
-     return;
-
-   switch (n->type)
-     {
-      case EET_G_VAR_ARRAY:
-      case EET_G_ARRAY:
-      case EET_G_UNKNOWN:
-      case EET_G_HASH:
-      case EET_G_LIST:
-        eet_node_dump_group_start(dumplevel,
-                                  dumpfunc,
-                                  dumpdata,
-                                  n->type,
-                                  n->name);
-
-        if (n->type == EET_G_VAR_ARRAY
-            || n->type == EET_G_ARRAY)
-          {
-             char tbuf[256];
-
-             eet_node_dump_level(dumplevel, dumpfunc, dumpdata);
-             dumpfunc(dumpdata, "    count ");
-             eina_convert_itoa(n->count, tbuf);
-             dumpfunc(dumpdata, tbuf);
-             dumpfunc(dumpdata, ";\n");
-          }
-        else if (n->type == EET_G_HASH)
-          {
-             eet_node_dump_level(dumplevel, dumpfunc, dumpdata);
-             dumpfunc(dumpdata, "    key \"");
-             eet_node_dump_string_escape(dumpdata, dumpfunc, n->key);
-             dumpfunc(dumpdata, "\";\n");
-          }
-
-        for (it = n->values; it; it = it->next)
-          eet_node_dump(it, dumplevel + 2, dumpfunc, dumpdata);
-
-        eet_node_dump_group_end(dumplevel, dumpfunc, dumpdata);
-        break;
-
-      case EET_T_STRING:
-      case EET_T_INLINED_STRING:
-      case EET_T_CHAR:
-      case EET_T_SHORT:
-      case EET_T_INT:
-      case EET_T_LONG_LONG:
-      case EET_T_FLOAT:
-      case EET_T_DOUBLE:
-      case EET_T_UCHAR:
-      case EET_T_USHORT:
-      case EET_T_UINT:
-      case EET_T_ULONG_LONG:
-        eet_node_dump_simple_type(n, dumplevel, dumpfunc, dumpdata);
-        break;
-     }
-}
-
-void *
-eet_node_walk(void          *parent,
-              const char    *name,
-              Eet_Node      *root,
-              Eet_Node_Walk *cb,
-              void          *user_data)
-{
-   Eet_Node *it;
-   void *me = NULL;
-   int i;
-
-   if (!root)
-     {
-        if (parent)
-          cb->struct_add(parent, name, NULL, user_data);
-
-        return NULL;
-     }
-
-   switch (root->type)
-     {
-      case EET_G_UNKNOWN:
-        me = cb->struct_alloc(root->name, user_data);
-
-        for (it = root->values; it; it = it->next)
-          eet_node_walk(me, it->name, it, cb, user_data);
-
-        break;
-
-      case EET_G_VAR_ARRAY:
-      case EET_G_ARRAY:
-        me = cb->array(root->type == EET_G_VAR_ARRAY ? EINA_TRUE : EINA_FALSE,
-                       root->name, root->count, user_data);
-
-        for (i = 0, it = root->values; it; it = it->next)
-          cb->insert(me, i++, eet_node_walk(NULL,
-                                            NULL,
-                                            it,
-                                            cb,
-                                            user_data), user_data);
-
-        break;
-
-      case EET_G_LIST:
-        me = cb->list(root->name, user_data);
-
-        for (it = root->values; it; it = it->next)
-          cb->append(me, eet_node_walk(NULL,
-                                       NULL,
-                                       it,
-                                       cb,
-                                       user_data), user_data);
-
-        break;
-
-      case EET_G_HASH:
-        if (!parent)
-          return NULL;
-
-        return cb->hash(parent, root->name, root->key,
-                        eet_node_walk(NULL,
-                                      NULL,
-                                      root->values,
-                                      cb,
-                                      user_data), user_data);
-
-      case EET_T_STRING:
-      case EET_T_INLINED_STRING:
-      case EET_T_CHAR:
-      case EET_T_SHORT:
-      case EET_T_INT:
-      case EET_T_LONG_LONG:
-      case EET_T_FLOAT:
-      case EET_T_DOUBLE:
-      case EET_T_UCHAR:
-      case EET_T_USHORT:
-      case EET_T_UINT:
-      case EET_T_ULONG_LONG:
-        me = cb->simple(root->type, &root->data, user_data);
-        break;
-     }
-
-   if (parent)
-     cb->struct_add(parent, name, me, user_data);
-
-   return me;
-}
-
-int
-eet_node_init(void)
-{
-   const char *choice;
-   const char *tmp;
-
-#ifdef EINA_DEFAULT_MEMPOOL
-   choice = "pass_through";
-#else
-   choice = "chained_mempool";
-#endif
-   tmp = getenv("EINA_MEMPOOL");
-   if (tmp && tmp[0])
-     choice = tmp;
-
-   _eet_node_mp =
-     eina_mempool_add(choice, "eet-node-alloc", NULL, sizeof(Eet_Node), 1024);
-
-   return _eet_node_mp ? 1 : 0;
-}
-
-void
-eet_node_shutdown(void)
-{
-   eina_mempool_del(_eet_node_mp);
-   _eet_node_mp = NULL;
-}
-
diff --git a/libraries/eet/src/lib/eet_utils.c b/libraries/eet/src/lib/eet_utils.c
deleted file mode 100644
index b04ad1b..0000000
--- a/libraries/eet/src/lib/eet_utils.c
+++ /dev/null
@@ -1,36 +0,0 @@
-#ifdef HAVE_CONFIG_H
-# include <config.h>
-#endif /* ifdef HAVE_CONFIG_H */
-
-#include <stdio.h>
-#include <math.h>
-
-#include "Eet.h"
-#include "Eet_private.h"
-
-int
-_eet_hash_gen(const char *key,
-              int         hash_size)
-{
-   int hash_num = 0;
-   int value, i;
-   int mask;
-   unsigned char *ptr;
-
-   /* no string - index 0 */
-   if (!key)
-     return 0;
-
-   /* calc hash num */
-   for (i = 0, ptr = (unsigned char *)key, value = (int)(*ptr);
-        value;
-        ptr++, i++, value = (int)(*ptr))
-     hash_num ^= (value | (value << 8)) >> (i & 0x7);
-
-   /* mask it */
-   mask = (1 << hash_size) - 1;
-   hash_num &= mask;
-   /* return it */
-   return hash_num;
-}
-
diff --git a/libraries/eet/src/tests/Makefile.am b/libraries/eet/src/tests/Makefile.am
deleted file mode 100644
index 61158f7..0000000
--- a/libraries/eet/src/tests/Makefile.am
+++ /dev/null
@@ -1,18 +0,0 @@
-MAINTAINERCLEANFILES = Makefile.in
-
-AM_CPPFLAGS = \
--I$(top_srcdir)/src/lib \
--DTESTS_SRC_DIR=\"$(top_srcdir)/src/tests\" \
-@CHECK_CFLAGS@ \
-@EINA_CFLAGS@
-
-if EFL_ENABLE_TESTS
-
-check_PROGRAMS = eet_suite
-
-eet_suite_SOURCES = eet_suite.c eet_data_suite.c
-eet_suite_LDADD = $(top_builddir)/src/lib/libeet.la @EINA_LIBS@ @CHECK_LIBS@
-
-endif
-
-EXTRA_DIST = eet_suite.h cert.pem key_enc_none.pem key_enc.pem key.pem
diff --git a/libraries/eet/src/tests/Makefile.in b/libraries/eet/src/tests/Makefile.in
deleted file mode 100644
index e17a54e..0000000
--- a/libraries/eet/src/tests/Makefile.in
+++ /dev/null
@@ -1,547 +0,0 @@
-# Makefile.in generated by automake 1.11.1 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
-# Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-VPATH = @srcdir@
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-@EFL_ENABLE_TESTS_TRUE@check_PROGRAMS = eet_suite$(EXEEXT)
-subdir = src/tests
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in TODO
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/ac_attribute.m4 \
-        $(top_srcdir)/m4/ac_path_generic.m4 \
-        $(top_srcdir)/m4/efl_binary.m4 \
-        $(top_srcdir)/m4/efl_compiler_flag.m4 \
-        $(top_srcdir)/m4/efl_coverage.m4 \
-        $(top_srcdir)/m4/efl_doxygen.m4 \
-        $(top_srcdir)/m4/efl_fnmatch.m4 \
-        $(top_srcdir)/m4/efl_path_max.m4 $(top_srcdir)/m4/efl_tests.m4 \
-        $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
-        $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
-        $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-        $(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/config.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-am__eet_suite_SOURCES_DIST = eet_suite.c eet_data_suite.c
-@EFL_ENABLE_TESTS_TRUE@am_eet_suite_OBJECTS = eet_suite.$(OBJEXT) \
-@EFL_ENABLE_TESTS_TRUE@ eet_data_suite.$(OBJEXT)
-eet_suite_OBJECTS = $(am_eet_suite_OBJECTS)
-@EFL_ENABLE_TESTS_TRUE@eet_suite_DEPENDENCIES =  \
-@EFL_ENABLE_TESTS_TRUE@ $(top_builddir)/src/lib/libeet.la
-AM_V_lt = $(am__v_lt_$(V))
-am__v_lt_ = $(am__v_lt_$(AM_DEFAULT_VERBOSITY))
-am__v_lt_0 = --silent
-DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)
-depcomp = $(SHELL) $(top_srcdir)/depcomp
-am__depfiles_maybe = depfiles
-am__mv = mv -f
-COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
-        $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
-        $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \
-        $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
-        $(AM_CFLAGS) $(CFLAGS)
-AM_V_CC = $(am__v_CC_$(V))
-am__v_CC_ = $(am__v_CC_$(AM_DEFAULT_VERBOSITY))
-am__v_CC_0 = @echo "  CC    " $@;
-AM_V_at = $(am__v_at_$(V))
-am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
-am__v_at_0 = @
-CCLD = $(CC)
-LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
-        $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
-        $(AM_LDFLAGS) $(LDFLAGS) -o $@
-AM_V_CCLD = $(am__v_CCLD_$(V))
-am__v_CCLD_ = $(am__v_CCLD_$(AM_DEFAULT_VERBOSITY))
-am__v_CCLD_0 = @echo "  CCLD  " $@;
-AM_V_GEN = $(am__v_GEN_$(V))
-am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
-am__v_GEN_0 = @echo "  GEN   " $@;
-SOURCES = $(eet_suite_SOURCES)
-DIST_SOURCES = $(am__eet_suite_SOURCES_DIST)
-ETAGS = etags
-CTAGS = ctags
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-ALLOCA = @ALLOCA@
-AMTAR = @AMTAR@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AR = @AR@
-AS = @AS@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CHECK_CFLAGS = @CHECK_CFLAGS@
-CHECK_LIBS = @CHECK_LIBS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEBUG_CFLAGS = @DEBUG_CFLAGS@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DLLTOOL = @DLLTOOL@
-DSYMUTIL = @DSYMUTIL@
-DUMPBIN = @DUMPBIN@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EET_CFLAGS = @EET_CFLAGS@
-EET_CPPFLAGS = @EET_CPPFLAGS@
-EET_LIBS = @EET_LIBS@
-EET_PRG = @EET_PRG@
-EFL_COVERAGE_CFLAGS = @EFL_COVERAGE_CFLAGS@
-EFL_COVERAGE_LIBS = @EFL_COVERAGE_LIBS@
-EFL_EET_BUILD = @EFL_EET_BUILD@
-EFL_FNMATCH_LIBS = @EFL_FNMATCH_LIBS@
-EGREP = @EGREP@
-EINA_CFLAGS = @EINA_CFLAGS@
-EINA_LIBS = @EINA_LIBS@
-EVIL_CFLAGS = @EVIL_CFLAGS@
-EVIL_LIBS = @EVIL_LIBS@
-EXEEXT = @EXEEXT@
-EXOTIC_CFLAGS = @EXOTIC_CFLAGS@
-EXOTIC_LIBS = @EXOTIC_LIBS@
-FGREP = @FGREP@
-GNUTLS_CFLAGS = @GNUTLS_CFLAGS@
-GNUTLS_LIBS = @GNUTLS_LIBS@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-LD = @LD@
-LDFLAGS = @LDFLAGS@
-LIBGCRYPT_CFLAGS = @LIBGCRYPT_CFLAGS@
-LIBGCRYPT_CONFIG = @LIBGCRYPT_CONFIG@
-LIBGCRYPT_LIBS = @LIBGCRYPT_LIBS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LIPO = @LIPO@
-LN_S = @LN_S@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-MKDIR_P = @MKDIR_P@
-NM = @NM@
-NMEDIT = @NMEDIT@
-OBJDUMP = @OBJDUMP@
-OBJEXT = @OBJEXT@
-OPENSSL_CFLAGS = @OPENSSL_CFLAGS@
-OPENSSL_LIBS = @OPENSSL_LIBS@
-OTOOL = @OTOOL@
-OTOOL64 = @OTOOL64@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-PKG_CONFIG = @PKG_CONFIG@
-PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
-PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
-RANLIB = @RANLIB@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-STRIP = @STRIP@
-VERSION = @VERSION@
-VMAJ = @VMAJ@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-efl_doxygen = @efl_doxygen@
-efl_have_doxygen = @efl_have_doxygen@
-exec_prefix = @exec_prefix@
-have_lcov = @have_lcov@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-lt_ECHO = @lt_ECHO@
-lt_enable_auto_import = @lt_enable_auto_import@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-pkgconfig_requires_private = @pkgconfig_requires_private@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-release_info = @release_info@
-requirement_eet = @requirement_eet@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-version_info = @version_info@
-MAINTAINERCLEANFILES = Makefile.in
-AM_CPPFLAGS = \
--I$(top_srcdir)/src/lib \
--DTESTS_SRC_DIR=\"$(top_srcdir)/src/tests\" \
-@CHECK_CFLAGS@ \
-@EINA_CFLAGS@
-
-@EFL_ENABLE_TESTS_TRUE@eet_suite_SOURCES = eet_suite.c eet_data_suite.c
-@EFL_ENABLE_TESTS_TRUE@eet_suite_LDADD = $(top_builddir)/src/lib/libeet.la @EINA_LIBS@ @CHECK_LIBS@
-EXTRA_DIST = eet_suite.h cert.pem key_enc_none.pem key_enc.pem key.pem
-all: all-am
-
-.SUFFIXES:
-.SUFFIXES: .c .lo .o .obj
-$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
-        @for dep in $?; do \
-          case '$(am__configure_deps)' in \
-            *$$dep*) \
-              ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
-                && { if test -f $@; then exit 0; else break; fi; }; \
-              exit 1;; \
-          esac; \
-        done; \
-        echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu src/tests/Makefile'; \
-        $(am__cd) $(top_srcdir) && \
-          $(AUTOMAKE) --gnu src/tests/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-        @case '$?' in \
-          *config.status*) \
-            cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
-          *) \
-            echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
-            cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
-        esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-        cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure:  $(am__configure_deps)
-        cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
-        cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-
-clean-checkPROGRAMS:
-        @list='$(check_PROGRAMS)'; test -n "$$list" || exit 0; \
-        echo " rm -f" $$list; \
-        rm -f $$list || exit $$?; \
-        test -n "$(EXEEXT)" || exit 0; \
-        list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
-        echo " rm -f" $$list; \
-        rm -f $$list
-eet_suite$(EXEEXT): $(eet_suite_OBJECTS) $(eet_suite_DEPENDENCIES) 
-        @rm -f eet_suite$(EXEEXT)
-        $(AM_V_CCLD)$(LINK) $(eet_suite_OBJECTS) $(eet_suite_LDADD) $(LIBS)
-
-mostlyclean-compile:
-        -rm -f *.$(OBJEXT)
-
-distclean-compile:
-        -rm -f *.tab.c
-
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eet_data_suite.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eet_suite.Po@am__quote@
-
-.c.o:
-@am__fastdepCC_TRUE@    $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@    $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@am__fastdepCC_FALSE@   $(AM_V_CC) @AM_BACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@       source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@       DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@   $(COMPILE) -c $<
-
-.c.obj:
-@am__fastdepCC_TRUE@    $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@    $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@am__fastdepCC_FALSE@   $(AM_V_CC) @AM_BACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@       source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@       DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@   $(COMPILE) -c `$(CYGPATH_W) '$<'`
-
-.c.lo:
-@am__fastdepCC_TRUE@    $(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@    $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
-@am__fastdepCC_FALSE@   $(AM_V_CC) @AM_BACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@       source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@       DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@   $(LTCOMPILE) -c -o $@ $<
-
-mostlyclean-libtool:
-        -rm -f *.lo
-
-clean-libtool:
-        -rm -rf .libs _libs
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
-        list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
-        unique=`for i in $$list; do \
-            if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-          done | \
-          $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-              END { if (nonempty) { for (i in files) print i; }; }'`; \
-        mkid -fID $$unique
-tags: TAGS
-
-TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
-                $(TAGS_FILES) $(LISP)
-        set x; \
-        here=`pwd`; \
-        list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
-        unique=`for i in $$list; do \
-            if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-          done | \
-          $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-              END { if (nonempty) { for (i in files) print i; }; }'`; \
-        shift; \
-        if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
-          test -n "$$unique" || unique=$$empty_fix; \
-          if test $$# -gt 0; then \
-            $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-              "$$@" $$unique; \
-          else \
-            $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-              $$unique; \
-          fi; \
-        fi
-ctags: CTAGS
-CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
-                $(TAGS_FILES) $(LISP)
-        list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
-        unique=`for i in $$list; do \
-            if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-          done | \
-          $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-              END { if (nonempty) { for (i in files) print i; }; }'`; \
-        test -z "$(CTAGS_ARGS)$$unique" \
-          || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-             $$unique
-
-GTAGS:
-        here=`$(am__cd) $(top_builddir) && pwd` \
-          && $(am__cd) $(top_srcdir) \
-          && gtags -i $(GTAGS_ARGS) "$$here"
-
-distclean-tags:
-        -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-distdir: $(DISTFILES)
-        @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-        topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-        list='$(DISTFILES)'; \
-          dist_files=`for file in $$list; do echo $$file; done | \
-          sed -e "s|^$$srcdirstrip/||;t" \
-              -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
-        case $$dist_files in \
-          */*) $(MKDIR_P) `echo "$$dist_files" | \
-                           sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
-                           sort -u` ;; \
-        esac; \
-        for file in $$dist_files; do \
-          if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-          if test -d $$d/$$file; then \
-            dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
-            if test -d "$(distdir)/$$file"; then \
-              find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-            fi; \
-            if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-              cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
-              find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-            fi; \
-            cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
-          else \
-            test -f "$(distdir)/$$file" \
-            || cp -p $$d/$$file "$(distdir)/$$file" \
-            || exit 1; \
-          fi; \
-        done
-check-am: all-am
-        $(MAKE) $(AM_MAKEFLAGS) $(check_PROGRAMS)
-check: check-am
-all-am: Makefile
-installdirs:
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
-        @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
-        $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-          install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-          `test -z '$(STRIP)' || \
-            echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-        -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-        -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
-        @echo "This command is intended for maintainers to use"
-        @echo "it deletes files that may require special tools to rebuild."
-        -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
-clean: clean-am
-
-clean-am: clean-checkPROGRAMS clean-generic clean-libtool \
-        mostlyclean-am
-
-distclean: distclean-am
-        -rm -rf ./$(DEPDIR)
-        -rm -f Makefile
-distclean-am: clean-am distclean-compile distclean-generic \
-        distclean-tags
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am:
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am:
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man:
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
-        -rm -rf ./$(DEPDIR)
-        -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-compile mostlyclean-generic \
-        mostlyclean-libtool
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am:
-
-.MAKE: check-am install-am install-strip
-
-.PHONY: CTAGS GTAGS all all-am check check-am clean \
-        clean-checkPROGRAMS clean-generic clean-libtool ctags \
-        distclean distclean-compile distclean-generic \
-        distclean-libtool distclean-tags distdir dvi dvi-am html \
-        html-am info info-am install install-am install-data \
-        install-data-am install-dvi install-dvi-am install-exec \
-        install-exec-am install-html install-html-am install-info \
-        install-info-am install-man install-pdf install-pdf-am \
-        install-ps install-ps-am install-strip installcheck \
-        installcheck-am installdirs maintainer-clean \
-        maintainer-clean-generic mostlyclean mostlyclean-compile \
-        mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
-        tags uninstall uninstall-am
-
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/libraries/eet/src/tests/TODO b/libraries/eet/src/tests/TODO
deleted file mode 100644
index da5fa1b..0000000
--- a/libraries/eet/src/tests/TODO
+++ /dev/null
@@ -1,3 +0,0 @@
-The purpose of the current test is to check the validity of the result in a
-normal environment. But we should at some point also test the robustness of
-this library when for example malloc fail.
diff --git a/libraries/eet/src/tests/cert.pem b/libraries/eet/src/tests/cert.pem
deleted file mode 100644
index 3265462..0000000
--- a/libraries/eet/src/tests/cert.pem
+++ /dev/null
@@ -1,22 +0,0 @@
------BEGIN CERTIFICATE-----
-MIIDmTCCAwKgAwIBAgIJAIKWPcLUT5FAMA0GCSqGSIb3DQEBBQUAMIGQMQswCQYD
-VQQGEwJGUjEWMBQGA1UECBMNSWxlLURlLUZyYW5jZTEOMAwGA1UEBxMFUGFyaXMx
-FjAUBgNVBAoTDUVubGlnaHRlbm1lbnQxDjAMBgNVBAsTBVRlc3RzMQ0wCwYDVQQD
-EwRCQUlMMSIwIAYJKoZIhvcNAQkBFhNjZWRyaWMuYmFpbEBmcmVlLmZyMB4XDTA4
-MDczMDEzNDU1OVoXDTA5MDczMDEzNDU1OVowgZAxCzAJBgNVBAYTAkZSMRYwFAYD
-VQQIEw1JbGUtRGUtRnJhbmNlMQ4wDAYDVQQHEwVQYXJpczEWMBQGA1UEChMNRW5s
-aWdodGVubWVudDEOMAwGA1UECxMFVGVzdHMxDTALBgNVBAMTBEJBSUwxIjAgBgkq
-hkiG9w0BCQEWE2NlZHJpYy5iYWlsQGZyZWUuZnIwgZ8wDQYJKoZIhvcNAQEBBQAD
-gY0AMIGJAoGBAMiE486eROKePG0/639D4XTTDR9XSRWp1xqZzq7P+jjWRFbZ/MWV
-IVzkc4MRm83UOolbPj76LjM10cseaVAhK7G9CHp2dur4alWvdCXPH5Q+LPOFS9gM
-x0Jz9EZeHHOHZKLyJdKSmot+zluwJTLe081RRUwzNKct6JrVVG/7SmITAgMBAAGj
-gfgwgfUwHQYDVR0OBBYEFEFar6doT5ImL2rf0rJX7EYQqtYQMIHFBgNVHSMEgb0w
-gbqAFEFar6doT5ImL2rf0rJX7EYQqtYQoYGWpIGTMIGQMQswCQYDVQQGEwJGUjEW
-MBQGA1UECBMNSWxlLURlLUZyYW5jZTEOMAwGA1UEBxMFUGFyaXMxFjAUBgNVBAoT
-DUVubGlnaHRlbm1lbnQxDjAMBgNVBAsTBVRlc3RzMQ0wCwYDVQQDEwRCQUlMMSIw
-IAYJKoZIhvcNAQkBFhNjZWRyaWMuYmFpbEBmcmVlLmZyggkAgpY9wtRPkUAwDAYD
-VR0TBAUwAwEB/zANBgkqhkiG9w0BAQUFAAOBgQCpZJhk8BgQh0foiMkOwOMKvObq
-GxAzqjbr7iU9tEvJgwukCBv59ndBM0B5l5ybQdIYWQJOfZE1HTvB60swZMwqap9X
-5QXgewymuXiVk+roVh34wg8Pg8F588G2BtLIoujY/gN3WJQR7YPD34iTPc4koV+A
-4vs6nmL6wtW21+hsaw==
------END CERTIFICATE-----
diff --git a/libraries/eet/src/tests/eet_data_suite.c b/libraries/eet/src/tests/eet_data_suite.c
deleted file mode 100644
index c4d5e50..0000000
--- a/libraries/eet/src/tests/eet_data_suite.c
+++ /dev/null
@@ -1,73 +0,0 @@
-#include <string.h>
-#include <stdio.h>
-
-#include <Eina.h>
-
-#include "eet_suite.h"
-
-static char *
-_eet_str_direct_alloc(const char *str)
-{
-   return (char *)str;
-} /* _eet_str_direct_alloc */
-
-static void
-_eet_str_direct_free(const char *str)
-{
-   /* FIXME: Use attribute unused */
-    (void)str;
-} /* _eet_str_direct_free */
-
-static void
-_eet_eina_hash_foreach(void             *hash,
-                       Eina_Hash_Foreach cb,
-                       void             *fdata)
-{
-   if (hash)
-     eina_hash_foreach(hash, cb, fdata);
-} /* _eet_eina_hash_foreach */
-
-/* Internal wrapper for eina_hash */
-static Eina_Hash *
-_eet_eina_hash_add(Eina_Hash  *hash,
-                   const char *key,
-                   const void *data)
-{
-   if (!hash)
-     hash = eina_hash_string_superfast_new(NULL);
-
-   if (!hash)
-     return NULL;
-
-   eina_hash_add(hash, key, data);
-   return hash;
-} /* _eet_eina_hash_add */
-
-static void
-_eet_eina_hash_free(Eina_Hash *hash)
-{
-   if (hash)
-     eina_hash_free(hash);
-} /* _eet_eina_hash_free */
-
-void
-eet_test_setup_eddc(Eet_Data_Descriptor_Class *eddc)
-{
-   eddc->version = EET_DATA_DESCRIPTOR_CLASS_VERSION;
-   eddc->func.mem_alloc = NULL;
-   eddc->func.mem_free = NULL;
-   eddc->func.str_alloc = NULL;
-   eddc->func.str_free = NULL;
-   eddc->func.list_next = (void *)eina_list_next;
-   eddc->func.list_append = (void *)eina_list_append;
-   eddc->func.list_data = (void *)eina_list_data_get;
-   eddc->func.list_free = (void *)eina_list_free;
-   eddc->func.hash_foreach = (void *)_eet_eina_hash_foreach;
-   eddc->func.hash_add = (void *)_eet_eina_hash_add;
-   eddc->func.hash_free = (void *)_eet_eina_hash_free;
-   eddc->func.str_direct_alloc = (void *)_eet_str_direct_alloc;
-   eddc->func.str_direct_free = (void *)_eet_str_direct_free;
-   eddc->func.array_alloc = NULL;
-   eddc->func.array_free = NULL;
-} /* eet_test_setup_eddc */
-
diff --git a/libraries/eet/src/tests/eet_suite.c b/libraries/eet/src/tests/eet_suite.c
deleted file mode 100644
index 91ef2a7..0000000
--- a/libraries/eet/src/tests/eet_suite.c
+++ /dev/null
@@ -1,2779 +0,0 @@
-#ifdef HAVE_CONFIG_H
-# include <config.h>
-#endif /* ifdef HAVE_CONFIG_H */
-
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <stdlib.h>
-#include <string.h>
-#include <strings.h>
-#include <stdio.h>
-#include <fcntl.h>
-#include <unistd.h>
-
-#include <Eina.h>
-
-#ifdef EINA_HAVE_THREADS
-#if ((!defined(_WIN32_WCE)) && (!defined(_WIN32)))
-# include <pthread.h>
-# define _EET_INCLUDED_PTHREAD
-#endif
-#endif /* ifdef EINA_HAVE_THREADS */
-
-#include <check.h>
-
-#include "eet_suite.h"
-
-#define CERT_DIR ((*TESTS_SRC_DIR == '/') ? TESTS_SRC_DIR : "src/tests/" TESTS_SRC_DIR)
-
-START_TEST(eet_test_init)
-{
-   int ret;
-
-   ret = eet_init();
-   fail_if(ret != 1);
-
-   ret = eet_shutdown();
-   fail_if(ret != 0);
-}
-END_TEST
-
-typedef struct _Eet_Test_Basic_Type Eet_Test_Basic_Type;
-struct _Eet_Test_Basic_Type
-{
-   char                 c;
-   short                s;
-   int                  i;
-   long long            l;
-   char                *str;
-   char                *istr;
-   float                f1;
-   float                f2;
-   double               d;
-   unsigned char        uc;
-   unsigned short       us;
-   unsigned int         ui;
-   unsigned long long   ul;
-   Eet_Test_Basic_Type *empty;
-   Eet_Test_Basic_Type *with;
-};
-
-#define EET_TEST_CHAR       0x42
-#define EET_TEST_SHORT      0x4224
-#define EET_TEST_INT        0x42211224
-#define EET_TEST_LONG_LONG  0x84CB42211224BC48
-#define EET_TEST_STRING     "my little test with escape \\\""
-#define EET_TEST_KEY1       "key1"
-#define EET_TEST_KEY2       "key2"
-#define EET_TEST_FLOAT      123.45689
-#define EET_TEST_FLOAT2     1.0
-#define EET_TEST_FLOAT3     0.25
-#define EET_TEST_FLOAT4     0.0001234
-#define EET_TEST_DOUBLE     123456789.9876543210
-#define EET_TEST_DOUBLE2    1.0
-#define EET_TEST_DOUBLE3    0.25
-#define EET_TEST_FILE_KEY1  "keys/data/1"
-#define EET_TEST_FILE_KEY2  "keys/data/2"
-#define EET_TEST_FILE_IMAGE "keys/images/"
-
-typedef struct _Eet_Test_Image Eet_Test_Image;
-struct _Eet_Test_Image
-{
-   unsigned int w;
-   unsigned int h;
-   int          alpha;
-   unsigned int color[64];
-};
-
-static const Eet_Test_Image test_noalpha = {
-   8, 8, 0,
-   {
-      0x00AA0000, 0x0000AA00, 0x000000AA, 0x00110000, 0x00AA0000, 0x0000AA00,
-      0x000000AA, 0x00110000,
-      0x0000AA00, 0x000000AA, 0x00110000, 0x00AA0000, 0x0000AA00, 0x000000AA,
-      0x00110000, 0x00AA0000,
-      0x000000AA, 0x00110000, 0x00AA0000, 0x0000AA00, 0x000000AA, 0x00110000,
-      0x00AA0000, 0x0000AA00,
-      0x00110000, 0x00AA0000, 0x0000AA00, 0x000000AA, 0x00110000, 0x00AA0000,
-      0x0000AA00, 0x000000AA,
-      0x00AA0000, 0x0000AA00, 0x000000AA, 0x00110000, 0x00AA0000, 0x0000AA00,
-      0x000000AA, 0x00110000,
-      0x0000AA00, 0x000000AA, 0x00110000, 0x00AA0000, 0x0000AA00, 0x000000AA,
-      0x00110000, 0x00AA0000,
-      0x000000AA, 0x00110000, 0x00AA0000, 0x0000AA00, 0x000000AA, 0x00110000,
-      0x00AA0000, 0x0000AA00,
-      0x00110000, 0x00AA0000, 0x0000AA00, 0x000000AA, 0x00110000, 0x00AA0000,
-      0x0000AA00, 0x000000AA
-   }
-};
-
-static const Eet_Test_Image test_alpha = {
-   8, 8, 1,
-   {
-      0x0FAA0000, 0x0000AA00, 0x000000AA, 0x00110000, 0x00AA0000, 0x0000AA00,
-      0x000000AA, 0x0F110000,
-      0x0000AA00, 0x0F0000AA, 0x00110000, 0x00AA0000, 0x0000AA00, 0x000000AA,
-      0x0F110000, 0x00AA0000,
-      0x000000AA, 0x00110000, 0x0FAA0000, 0x0000AA00, 0x000000AA, 0x0F110000,
-      0x00AA0000, 0x0000AA00,
-      0x00110000, 0x00AA0000, 0x0000AA00, 0x0F0000AA, 0x0F110000, 0x00AA0000,
-      0x0000AA00, 0x000000AA,
-      0x00AA0000, 0x0000AA00, 0x000000AA, 0x0F110000, 0x0FAA0000, 0x0000AA00,
-      0x000000AA, 0x00110000,
-      0x0000AA00, 0x000000AA, 0x0F110000, 0x00AA0000, 0x0000AA00, 0x0F0000AA,
-      0x00110000, 0x00AA0000,
-      0x000000AA, 0x0F110000, 0x00AA0000, 0x0000AA00, 0x000000AA, 0x00110000,
-      0x0FAA0000, 0x0000AA00,
-      0x0F110000, 0x00AA0000, 0x0000AA00, 0x000000AA, 0x00110000, 0x00AA0000,
-      0x0000AA00, 0x0F0000AA
-   }
-};
-
-static void
-_eet_test_basic_set(Eet_Test_Basic_Type *res,
-                    int                  i)
-{
-   res->c = EET_TEST_CHAR;
-   res->s = EET_TEST_SHORT;
-   res->i = EET_TEST_INT + i;
-   res->l = EET_TEST_LONG_LONG;
-   res->str = EET_TEST_STRING;
-   res->istr = EET_TEST_STRING;
-   res->f1 = -EET_TEST_FLOAT;
-   res->d = -EET_TEST_DOUBLE;
-   res->f2 = EET_TEST_FLOAT4;
-   res->uc = EET_TEST_CHAR;
-   res->us = EET_TEST_SHORT;
-   res->ui = EET_TEST_INT;
-   res->ul = EET_TEST_LONG_LONG;
-   res->empty = NULL;
-   res->with = NULL;
-
-   if (i == 0)
-     {
-        Eet_Test_Basic_Type *tmp;
-
-        tmp = malloc(sizeof (Eet_Test_Basic_Type));
-        fail_if(!tmp);
-
-        res->with = tmp;
-        tmp->c = EET_TEST_CHAR;
-        tmp->s = EET_TEST_SHORT;
-        tmp->i = EET_TEST_INT + i + 1;
-        tmp->l = EET_TEST_LONG_LONG;
-        tmp->str = EET_TEST_STRING;
-        tmp->istr = EET_TEST_STRING;
-        tmp->f1 = -EET_TEST_FLOAT;
-        tmp->d = -EET_TEST_DOUBLE;
-        tmp->f2 = EET_TEST_FLOAT4;
-        tmp->uc = EET_TEST_CHAR;
-        tmp->us = EET_TEST_SHORT;
-        tmp->ui = EET_TEST_INT;
-        tmp->ul = EET_TEST_LONG_LONG;
-        tmp->empty = NULL;
-        tmp->with = NULL;
-     }
-} /* _eet_test_basic_set */
-
-static void
-_eet_test_basic_check(Eet_Test_Basic_Type *result,
-                      int                  i)
-{
-   float tmp;
-
-   fail_if(result->c != EET_TEST_CHAR);
-   fail_if(result->s != EET_TEST_SHORT);
-   fail_if(result->i != EET_TEST_INT + i);
-   fail_if(result->l != (long long)EET_TEST_LONG_LONG);
-   fail_if(strcmp(result->str, EET_TEST_STRING) != 0);
-   fail_if(strcmp(result->istr, EET_TEST_STRING) != 0);
-   fail_if(result->uc != EET_TEST_CHAR);
-   fail_if(result->us != EET_TEST_SHORT);
-   fail_if(result->ui != EET_TEST_INT);
-   fail_if(result->ul != EET_TEST_LONG_LONG);
-
-   tmp = (result->f1 + EET_TEST_FLOAT);
-   if (tmp < 0)
-     tmp = -tmp;
-
-   fail_if(tmp > 0.005);
-
-   tmp = (result->f2 - EET_TEST_FLOAT4);
-   if (tmp < 0)
-     tmp = -tmp;
-
-   fail_if(tmp > 0.005);
-
-   tmp = (result->d + EET_TEST_DOUBLE);
-   if (tmp < 0)
-     tmp = -tmp;
-
-   fail_if(tmp > 0.00005);
-
-   fail_if(result->empty != NULL);
-   if (i == 0)
-     {
-        Eet_Test_Basic_Type *tmp2;
-
-        tmp2 = result->with;
-        fail_if(tmp2 == NULL);
-
-        fail_if(tmp2->c != EET_TEST_CHAR);
-        fail_if(tmp2->s != EET_TEST_SHORT);
-        fail_if(tmp2->i != EET_TEST_INT + i + 1);
-        fail_if(tmp2->l != (long long)EET_TEST_LONG_LONG);
-        fail_if(strcmp(tmp2->str, EET_TEST_STRING) != 0);
-        fail_if(strcmp(tmp2->istr, EET_TEST_STRING) != 0);
-        fail_if(tmp2->uc != EET_TEST_CHAR);
-        fail_if(tmp2->us != EET_TEST_SHORT);
-        fail_if(tmp2->ui != EET_TEST_INT);
-        fail_if(tmp2->ul != EET_TEST_LONG_LONG);
-     }
-   else
-     fail_if(result->with != NULL);
-} /* _eet_test_basic_check */
-
-static void
-_eet_build_basic_descriptor(Eet_Data_Descriptor *edd)
-{
-   EET_DATA_DESCRIPTOR_ADD_BASIC(edd,
-                                 Eet_Test_Basic_Type,
-                                 "c",
-                                 c,
-                                 EET_T_CHAR);
-   EET_DATA_DESCRIPTOR_ADD_BASIC(edd,
-                                 Eet_Test_Basic_Type,
-                                 "s",
-                                 s,
-                                 EET_T_SHORT);
-   EET_DATA_DESCRIPTOR_ADD_BASIC(edd,
-                                 Eet_Test_Basic_Type,
-                                 "i",
-                                 i,
-                                 EET_T_INT);
-   EET_DATA_DESCRIPTOR_ADD_BASIC(edd,
-                                 Eet_Test_Basic_Type,
-                                 "l",
-                                 l,
-                                 EET_T_LONG_LONG);
-   EET_DATA_DESCRIPTOR_ADD_BASIC(edd,
-                                 Eet_Test_Basic_Type,
-                                 "str",
-                                 str,
-                                 EET_T_STRING);
-   EET_DATA_DESCRIPTOR_ADD_BASIC(edd,
-                                 Eet_Test_Basic_Type,
-                                 "istr",
-                                 istr,
-                                 EET_T_INLINED_STRING);
-   EET_DATA_DESCRIPTOR_ADD_BASIC(edd,
-                                 Eet_Test_Basic_Type,
-                                 "f1",
-                                 f1,
-                                 EET_T_FLOAT);
-   EET_DATA_DESCRIPTOR_ADD_BASIC(edd,
-                                 Eet_Test_Basic_Type,
-                                 "f2",
-                                 f2,
-                                 EET_T_FLOAT);
-   EET_DATA_DESCRIPTOR_ADD_BASIC(edd,
-                                 Eet_Test_Basic_Type,
-                                 "d",
-                                 d,
-                                 EET_T_DOUBLE);
-   EET_DATA_DESCRIPTOR_ADD_BASIC(edd,
-                                 Eet_Test_Basic_Type,
-                                 "uc",
-                                 uc,
-                                 EET_T_UCHAR);
-   EET_DATA_DESCRIPTOR_ADD_BASIC(edd,
-                                 Eet_Test_Basic_Type,
-                                 "us",
-                                 us,
-                                 EET_T_USHORT);
-   EET_DATA_DESCRIPTOR_ADD_BASIC(edd,
-                                 Eet_Test_Basic_Type,
-                                 "ui",
-                                 ui,
-                                 EET_T_UINT);
-   EET_DATA_DESCRIPTOR_ADD_BASIC(edd,
-                                 Eet_Test_Basic_Type,
-                                 "ul",
-                                 ul,
-                                 EET_T_ULONG_LONG);
-
-   EET_DATA_DESCRIPTOR_ADD_SUB(edd, Eet_Test_Basic_Type, "empty", empty, edd);
-   EET_DATA_DESCRIPTOR_ADD_SUB(edd, Eet_Test_Basic_Type, "with", with, edd);
-} /* _eet_build_basic_descriptor */
-
-START_TEST(eet_test_basic_data_type_encoding_decoding)
-{
-   Eet_Data_Descriptor *edd;
-   Eet_Test_Basic_Type *result;
-   Eet_Data_Descriptor_Class eddc;
-   Eet_Test_Basic_Type etbt;
-   void *transfert;
-   int size;
-
-   eet_init();
-
-   _eet_test_basic_set(&etbt, 0);
-
-   eet_test_setup_eddc(&eddc);
-   eddc.name = "Eet_Test_Basic_Type";
-   eddc.size = sizeof(Eet_Test_Basic_Type);
-
-   edd = eet_data_descriptor_stream_new(&eddc);
-   fail_if(!edd);
-
-   _eet_build_basic_descriptor(edd);
-
-   transfert = eet_data_descriptor_encode(edd, &etbt, &size);
-   fail_if(!transfert || size <= 0);
-
-   result = eet_data_descriptor_decode(edd, transfert, size);
-   fail_if(!result);
-
-   _eet_test_basic_check(result, 0);
-
-   free(result->str);
-   free(result);
-
-   eet_data_descriptor_free(edd);
-
-   eet_shutdown();
-}
-END_TEST
-
-typedef struct _Eet_Test_Ex_Type Eet_Test_Ex_Type;
-struct _Eet_Test_Ex_Type
-{
-   char                 c;
-   short                s;
-   int                  i;
-   unsigned long long   l;
-   char                *str;
-   char                *istr;
-   float                f1;
-   float                f2;
-   float                f3;
-   float                f4;
-   double               d1;
-   double               d2;
-   double               d3;
-   double               d4;
-   Eina_List           *list;
-   Eina_Hash           *hash;
-   Eina_List           *ilist;
-   Eina_List           *slist;
-   Eina_Hash           *ihash;
-   Eina_Hash           *shash;
-   Eet_Test_Basic_Type  sarray1[10];
-   unsigned int         sarray2[5];
-   unsigned int         varray1_count;
-   unsigned int        *varray1;
-   unsigned int         varray2_count;
-   Eet_Test_Basic_Type *varray2;
-   unsigned char        uc;
-   unsigned short       us;
-   unsigned int         ui;
-   unsigned long long   ul;
-   char                *charray[10];
-};
-
-static int i42 = 42;
-static int i7 = 7;
-
-static void
-_eet_build_ex_descriptor(Eet_Data_Descriptor *edd)
-{
-   Eet_Data_Descriptor_Class eddc;
-   Eet_Test_Ex_Type etbt;
-   Eet_Data_Descriptor *eddb;
-
-   eet_test_setup_eddc(&eddc);
-   eddc.name = "Eet_Test_Basic_Type";
-   eddc.size = sizeof(Eet_Test_Basic_Type);
-   eddb = eet_data_descriptor_file_new(&eddc);
-   fail_if(!eddb);
-
-   _eet_build_basic_descriptor(eddb);
-
-   EET_DATA_DESCRIPTOR_ADD_BASIC(edd,
-                                 Eet_Test_Ex_Type,
-                                 "c",
-                                 c,
-                                 EET_T_CHAR);
-   EET_DATA_DESCRIPTOR_ADD_BASIC(edd,
-                                 Eet_Test_Ex_Type,
-                                 "s",
-                                 s,
-                                 EET_T_SHORT);
-   EET_DATA_DESCRIPTOR_ADD_BASIC(edd, Eet_Test_Ex_Type, "i", i, EET_T_INT);
-   EET_DATA_DESCRIPTOR_ADD_BASIC(edd,
-                                 Eet_Test_Ex_Type,
-                                 "l",
-                                 l,
-                                 EET_T_LONG_LONG);
-   EET_DATA_DESCRIPTOR_ADD_BASIC(edd,
-                                 Eet_Test_Ex_Type,
-                                 "str",
-                                 str,
-                                 EET_T_STRING);
-   EET_DATA_DESCRIPTOR_ADD_BASIC(edd,
-                                 Eet_Test_Ex_Type,
-                                 "istr",
-                                 istr,
-                                 EET_T_INLINED_STRING);
-   EET_DATA_DESCRIPTOR_ADD_BASIC(edd,
-                                 Eet_Test_Ex_Type,
-                                 "f1",
-                                 f1,
-                                 EET_T_FLOAT);
-   EET_DATA_DESCRIPTOR_ADD_BASIC(edd,
-                                 Eet_Test_Ex_Type,
-                                 "f2",
-                                 f2,
-                                 EET_T_FLOAT);
-   EET_DATA_DESCRIPTOR_ADD_BASIC(edd,
-                                 Eet_Test_Ex_Type,
-                                 "f3",
-                                 f3,
-                                 EET_T_FLOAT);
-   EET_DATA_DESCRIPTOR_ADD_BASIC(edd,
-                                 Eet_Test_Ex_Type,
-                                 "f4",
-                                 f4,
-                                 EET_T_FLOAT);
-   EET_DATA_DESCRIPTOR_ADD_BASIC(edd,
-                                 Eet_Test_Ex_Type,
-                                 "d1",
-                                 d1,
-                                 EET_T_DOUBLE);
-   EET_DATA_DESCRIPTOR_ADD_BASIC(edd,
-                                 Eet_Test_Ex_Type,
-                                 "d2",
-                                 d2,
-                                 EET_T_DOUBLE);
-   EET_DATA_DESCRIPTOR_ADD_BASIC(edd,
-                                 Eet_Test_Ex_Type,
-                                 "d3",
-                                 d3,
-                                 EET_T_DOUBLE);
-   EET_DATA_DESCRIPTOR_ADD_BASIC(edd,
-                                 Eet_Test_Ex_Type,
-                                 "d4",
-                                 d4,
-                                 EET_T_DOUBLE);
-   EET_DATA_DESCRIPTOR_ADD_BASIC(edd,
-                                 Eet_Test_Ex_Type,
-                                 "uc",
-                                 uc,
-                                 EET_T_UCHAR);
-   EET_DATA_DESCRIPTOR_ADD_BASIC(edd,
-                                 Eet_Test_Ex_Type,
-                                 "us",
-                                 us,
-                                 EET_T_USHORT);
-   EET_DATA_DESCRIPTOR_ADD_BASIC(edd,
-                                 Eet_Test_Ex_Type,
-                                 "ui",
-                                 ui,
-                                 EET_T_UINT);
-   EET_DATA_DESCRIPTOR_ADD_BASIC(edd,
-                                 Eet_Test_Ex_Type,
-                                 "ul",
-                                 ul,
-                                 EET_T_ULONG_LONG);
-   EET_DATA_DESCRIPTOR_ADD_ARRAY(edd,
-                                 Eet_Test_Ex_Type,
-                                 "sarray1",
-                                 sarray1,
-                                 eddb);
-   EET_DATA_DESCRIPTOR_ADD_VAR_ARRAY(edd,
-                                     Eet_Test_Ex_Type,
-                                     "varray2",
-                                     varray2,
-                                     eddb);
-   eet_data_descriptor_element_add(edd,
-                                   "varray1",
-                                   EET_T_INT,
-                                   EET_G_VAR_ARRAY,
-                                   (char *)(&(etbt.varray1)) - (char *)(&(etbt)),
-                                   (char *)(&(etbt.varray1_count)) -
-                                   (char *)(&(etbt)),
-                                   /* 0,  */ NULL,
-                                   NULL);
-   eet_data_descriptor_element_add(edd, "sarray2", EET_T_INT, EET_G_ARRAY,
-                                   (char *)(&(etbt.sarray2)) - (char *)(&(etbt)),
-                                   /* 0,  */ sizeof(etbt.sarray2) /
-                                   sizeof(etbt.sarray2[0]), NULL, NULL);
-   eet_data_descriptor_element_add(edd, "charray", EET_T_STRING, EET_G_ARRAY,
-                                   (char *)(&(etbt.charray)) - (char *)(&(etbt)),
-                                   /* 0,  */ sizeof(etbt.charray) /
-                                   sizeof(etbt.charray[0]), NULL, NULL);
-   EET_DATA_DESCRIPTOR_ADD_LIST(edd, Eet_Test_Ex_Type, "list", list, edd);
-   EET_DATA_DESCRIPTOR_ADD_HASH(edd, Eet_Test_Ex_Type, "hash", hash, edd);
-   eet_data_descriptor_element_add(edd, "ilist", EET_T_INT, EET_G_LIST,
-                                   (char *)(&(etbt.ilist)) - (char *)(&(etbt)),
-                                   0, /* 0,  */ NULL, NULL);
-   eet_data_descriptor_element_add(edd, "ihash", EET_T_INT, EET_G_HASH,
-                                   (char *)(&(etbt.ihash)) - (char *)(&(etbt)),
-                                   0, /* 0,  */ NULL, NULL);
-   eet_data_descriptor_element_add(edd, "slist", EET_T_STRING, EET_G_LIST,
-                                   (char *)(&(etbt.slist)) - (char *)(&(etbt)),
-                                   0, /* 0,  */ NULL, NULL);
-   eet_data_descriptor_element_add(edd, "shash", EET_T_STRING, EET_G_HASH,
-                                   (char *)(&(etbt.shash)) - (char *)(&(etbt)),
-                                   0, /* 0,  */ NULL, NULL);
-} /* _eet_build_ex_descriptor */
-
-static Eet_Test_Ex_Type *
-_eet_test_ex_set(Eet_Test_Ex_Type *res,
-                 int               offset)
-{
-   unsigned int i;
-
-   if (!res)
-     res = malloc(sizeof(Eet_Test_Ex_Type));
-
-   if (!res)
-     return NULL;
-
-   res->c = EET_TEST_CHAR + offset;
-   res->s = EET_TEST_SHORT + offset;
-   res->i = EET_TEST_INT + offset;
-   res->l = EET_TEST_LONG_LONG + offset;
-   res->str = EET_TEST_STRING;
-   res->istr = EET_TEST_STRING;
-   res->f1 = EET_TEST_FLOAT + offset;
-   res->f2 = -(EET_TEST_FLOAT2 + offset);
-   res->f3 = EET_TEST_FLOAT3 + offset;
-   res->f4 = EET_TEST_FLOAT2 + offset;
-   res->d1 = EET_TEST_DOUBLE + offset;
-   res->d2 = -(EET_TEST_DOUBLE2 + offset);
-   res->d3 = EET_TEST_DOUBLE3 + offset;
-   res->d4 = EET_TEST_DOUBLE2 + offset;
-   res->list = NULL;
-   res->hash = NULL;
-   res->ilist = NULL;
-   res->ihash = NULL;
-   res->slist = NULL;
-   res->shash = NULL;
-   for (i = 0; i < sizeof(res->charray) / sizeof(res->charray[0]); ++i)
-     res->charray[i] = NULL;
-
-   res->varray2 = malloc(sizeof (Eet_Test_Basic_Type) * 10);
-   res->varray1 = malloc(sizeof (int) * 5);
-   fail_if(!res->varray1 || !res->varray2);
-   for (i = 0; i < 10; ++i)
-     {
-        _eet_test_basic_set(res->sarray1 + i, i);
-        _eet_test_basic_set(res->varray2 + i, i);
-     }
-   res->varray2_count = 10;
-   for (i = 0; i < 5; ++i)
-     {
-        res->sarray2[i] = i * 42 + 1;
-        res->varray1[i] = i * 42 + 1;
-     }
-   res->varray1_count = 5;
-
-   res->uc = EET_TEST_CHAR + offset;
-   res->us = EET_TEST_SHORT + offset;
-   res->ui = EET_TEST_INT + offset;
-   res->ul = EET_TEST_LONG_LONG + offset;
-
-   return res;
-} /* _eet_test_ex_set */
-
-static int
-_eet_test_ex_check(Eet_Test_Ex_Type *stuff,
-                   int               offset)
-{
-   double tmp;
-   unsigned int i;
-
-   if (!stuff)
-     return 1;
-
-   if (stuff->c != EET_TEST_CHAR + offset)
-     return 1;
-
-   if (stuff->s != EET_TEST_SHORT + offset)
-     return 1;
-
-   if (stuff->i != EET_TEST_INT + offset)
-     return 1;
-
-   if (stuff->l != EET_TEST_LONG_LONG + offset)
-     return 1;
-
-   if (strcmp(stuff->str, EET_TEST_STRING) != 0)
-     return 1;
-
-   if (strcmp(stuff->istr, EET_TEST_STRING) != 0)
-     return 1;
-
-   tmp = stuff->f1 - (EET_TEST_FLOAT + offset);
-   if (tmp < 0)
-     tmp = -tmp;
-
-   if (tmp > 0.005)
-     return 1;
-
-   tmp = stuff->d1 - (EET_TEST_DOUBLE + offset);
-   if (tmp < 0)
-     tmp = -tmp;
-
-   if (tmp > 0.00005)
-     return 1;
-
-   if (stuff->f2 != -(EET_TEST_FLOAT2 + offset))
-     return 1;
-
-   if (stuff->d2 != -(EET_TEST_DOUBLE2 + offset))
-     return 1;
-
-   if (stuff->f3 != EET_TEST_FLOAT3 + offset)
-     return 1;
-
-   if (stuff->d3 != EET_TEST_DOUBLE3 + offset)
-     return 1;
-
-   if (stuff->f4 != EET_TEST_FLOAT2 + offset)
-     return 1;
-
-   if (stuff->d4 != EET_TEST_DOUBLE2 + offset)
-     return 1;
-
-   if (stuff->uc != EET_TEST_CHAR + offset)
-     return 1;
-
-   if (stuff->us != EET_TEST_SHORT + offset)
-     return 1;
-
-   if (stuff->ui != (unsigned int)EET_TEST_INT + offset)
-     return 1;
-
-   if (stuff->ul != EET_TEST_LONG_LONG + offset)
-     return 1;
-
-   if (stuff->varray1_count != 5)
-     return 1;
-
-   if (stuff->varray2_count != 10)
-     return 1;
-
-   for (i = 0; i < 5; ++i)
-     if (stuff->sarray2[i] != i * 42 + 1 && stuff->varray1[i] != i * 42 + 1)
-       return 1;
-
-   for (i = 0; i < 10; ++i)
-     {
-        _eet_test_basic_check(stuff->sarray1 + i, i);
-        _eet_test_basic_check(stuff->varray2 + i, i);
-     }
-
-   return 0;
-} /* _eet_test_ex_check */
-
-static Eina_Bool
-func(__UNUSED__ const Eina_Hash *hash,
-     const void                 *key,
-     void                       *data,
-     void                       *fdata)
-{
-   int *res = fdata;
-
-   if (strcmp(key, EET_TEST_KEY1) != 0
-       && strcmp(key, EET_TEST_KEY2) != 0)
-     *res = 1;
-
-   if (_eet_test_ex_check(data, 2))
-     *res = 1;
-
-   return EINA_TRUE;
-} /* func */
-
-static Eina_Bool
-func7(__UNUSED__ const Eina_Hash *hash,
-      __UNUSED__ const void      *key,
-      void                       *data,
-      void                       *fdata)
-{
-   int *res = fdata;
-   int *val;
-
-   val = data;
-   if (!val)
-     *res = 1;
-
-   if (*val != 7)
-     *res = 1;
-
-   return EINA_TRUE;
-} /* func7 */
-
-START_TEST(eet_test_data_type_encoding_decoding)
-{
-   Eet_Data_Descriptor *edd;
-   Eet_Test_Ex_Type *result;
-   void *transfert;
-   Eet_Data_Descriptor_Class eddc;
-   Eet_Test_Ex_Type etbt;
-   int size;
-   int test;
-
-   eet_init();
-
-   _eet_test_ex_set(&etbt, 0);
-   etbt.list = eina_list_prepend(etbt.list, _eet_test_ex_set(NULL, 1));
-   etbt.hash = eina_hash_string_superfast_new(NULL);
-   eina_hash_add(etbt.hash, EET_TEST_KEY1, _eet_test_ex_set(NULL, 2));
-   etbt.ilist = eina_list_prepend(etbt.ilist, &i42);
-   etbt.ihash = eina_hash_string_superfast_new(NULL);
-   eina_hash_add(etbt.ihash, EET_TEST_KEY1, &i7);
-   etbt.slist = eina_list_prepend(NULL, "test");
-   etbt.shash = eina_hash_string_superfast_new(NULL);
-   eina_hash_add(etbt.shash, EET_TEST_KEY1, "test");
-   memset(&etbt.charray, 0, sizeof(etbt.charray));
-   etbt.charray[0] = "test";
-   etbt.charray[5] = "plouf";
-
-   eet_test_setup_eddc(&eddc);
-   eddc.name = "Eet_Test_Ex_Type";
-   eddc.size = sizeof(Eet_Test_Ex_Type);
-
-   edd = eet_data_descriptor_file_new(&eddc);
-   fail_if(!edd);
-
-   _eet_build_ex_descriptor(edd);
-
-   transfert = eet_data_descriptor_encode(edd, &etbt, &size);
-   fail_if(!transfert || size <= 0);
-
-   result = eet_data_descriptor_decode(edd, transfert, size);
-   fail_if(!result);
-
-   fail_if(_eet_test_ex_check(result, 0) != 0);
-   fail_if(_eet_test_ex_check(eina_list_data_get(result->list), 1) != 0);
-   fail_if(eina_list_data_get(result->ilist) == NULL);
-   fail_if(*((int *)eina_list_data_get(result->ilist)) != 42);
-   fail_if(eina_list_data_get(result->slist) == NULL);
-   fail_if(strcmp(eina_list_data_get(result->slist), "test") != 0);
-   fail_if(eina_hash_find(result->shash, EET_TEST_KEY1) == NULL);
-   fail_if(strcmp(eina_hash_find(result->shash, EET_TEST_KEY1), "test") != 0);
-   fail_if(strcmp(result->charray[0], "test") != 0);
-   fail_if(strcmp(result->charray[5], "plouf") != 0);
-
-   test = 0;
-   if (result->hash)
-     eina_hash_foreach(result->hash, func, &test);
-
-   fail_if(test != 0);
-   if (result->ihash)
-     eina_hash_foreach(result->ihash, func7, &test);
-
-   fail_if(test != 0);
-
-   eet_shutdown();
-}
-END_TEST
-
-static void
-append_string(void       *data,
-              const char *str)
-{
-   char **string = data;
-   int length;
-
-   if (!data)
-     return;
-
-   length = *string ? strlen(*string) : 0;
-   *string = realloc(*string, strlen(str) + length + 1);
-
-   memcpy((*string) + length, str, strlen(str) + 1);
-} /* append_string */
-
-START_TEST(eet_test_data_type_dump_undump)
-{
-   Eet_Data_Descriptor *edd;
-   Eet_Test_Ex_Type *result;
-   Eet_Data_Descriptor_Class eddc;
-   Eet_Test_Ex_Type etbt;
-   char *transfert1;
-   char *transfert2;
-   char *string1;
-   char *string2;
-   int size1;
-   int size2;
-   int test;
-
-   eet_init();
-
-   _eet_test_ex_set(&etbt, 0);
-   etbt.list = eina_list_prepend(etbt.list, _eet_test_ex_set(NULL, 1));
-   etbt.list = eina_list_prepend(etbt.list, _eet_test_ex_set(NULL, 1));
-   etbt.hash = eina_hash_string_superfast_new(NULL);
-   eina_hash_add(etbt.hash, EET_TEST_KEY1, _eet_test_ex_set(NULL, 2));
-   etbt.hash = eina_hash_string_superfast_new(NULL);
-   eina_hash_add(etbt.hash, EET_TEST_KEY2, _eet_test_ex_set(NULL, 2));
-   etbt.ilist = eina_list_prepend(etbt.ilist, &i42);
-   etbt.ilist = eina_list_prepend(etbt.ilist, &i42);
-   etbt.ihash = eina_hash_string_superfast_new(NULL);
-   eina_hash_add(etbt.ihash, EET_TEST_KEY1, &i7);
-   etbt.ihash = eina_hash_string_superfast_new(NULL);
-   eina_hash_add(etbt.ihash, EET_TEST_KEY2, &i7);
-   etbt.slist = eina_list_prepend(NULL, "test");
-   etbt.shash = eina_hash_string_superfast_new(NULL);
-   eina_hash_add(etbt.shash, EET_TEST_KEY1, "test");
-   memset(&etbt.charray, 0, sizeof(etbt.charray));
-   etbt.charray[0] = "test";
-
-   eet_test_setup_eddc(&eddc);
-   eddc.name = "Eet_Test_Ex_Type";
-   eddc.size = sizeof(Eet_Test_Ex_Type);
-
-   edd = eet_data_descriptor_file_new(&eddc);
-   fail_if(!edd);
-
-   _eet_build_ex_descriptor(edd);
-
-   transfert1 = eet_data_descriptor_encode(edd, &etbt, &size1);
-   fail_if(!transfert1 || size1 <= 0);
-
-   string1 = NULL;
-   eet_data_text_dump(transfert1, size1, append_string, &string1);
-   fail_if(!string1);
-
-   transfert2 = eet_data_text_undump(string1, string1 ? strlen(
-                                       string1) : 0, &size2);
-   fail_if(!transfert2 && size2 <= 0);
-
-   string2 = NULL;
-   eet_data_text_dump(transfert2, size2, append_string, &string2);
-   fail_if(!string2);
-
-   fail_if(strlen(string2) != strlen(string1));
-
-   result = eet_data_descriptor_decode(edd, transfert2, size2);
-   fail_if(!result);
-
-   fail_if(_eet_test_ex_check(result, 0) != 0);
-   fail_if(_eet_test_ex_check(eina_list_data_get(result->list), 1) != 0);
-   fail_if(eina_list_data_get(result->ilist) == NULL);
-   fail_if(*((int *)eina_list_data_get(result->ilist)) != 42);
-   fail_if(eina_list_data_get(result->slist) == NULL);
-   fail_if(strcmp(eina_list_data_get(result->slist), "test") != 0);
-   fail_if(eina_hash_find(result->shash, EET_TEST_KEY1) == NULL);
-   fail_if(strcmp(eina_hash_find(result->shash, EET_TEST_KEY1), "test") != 0);
-   fail_if(strcmp(result->charray[0], "test") != 0);
-
-   test = 0;
-   if (result->hash)
-     eina_hash_foreach(result->hash, func, &test);
-
-   fail_if(test != 0);
-   if (result->ihash)
-     eina_hash_foreach(result->ihash, func7, &test);
-
-   fail_if(test != 0);
-
-   eet_shutdown();
-}
-END_TEST
-START_TEST(eet_file_simple_write)
-{
-   const char *buffer = "Here is a string of data to save !";
-   Eet_File *ef;
-   char *test;
-   char *file = strdup("/tmp/eet_suite_testXXXXXX");
-   int size;
-
-   eet_init();
-
-   fail_if(!(file = tmpnam(file)));
-
-   fail_if(eet_mode_get(NULL) != EET_FILE_MODE_INVALID);
-
-   ef = eet_open(file, EET_FILE_MODE_WRITE);
-   fail_if(!ef);
-
-   fail_if(!eet_write(ef, "keys/tests", buffer, strlen(buffer) + 1, 1));
-   fail_if(!eet_alias(ef, "keys/alias", "keys/tests", 0));
-   fail_if(!eet_alias(ef, "keys/alias2", "keys/alias", 1));
-
-   fail_if(eet_mode_get(ef) != EET_FILE_MODE_WRITE);
-
-   fail_if(eet_list(ef, "*", &size) != NULL);
-   fail_if(eet_num_entries(ef) != -1);
-
-   eet_close(ef);
-
-   /* Test read of simple file */
-   ef = eet_open(file, EET_FILE_MODE_READ);
-   fail_if(!ef);
-
-   test = eet_read(ef, "keys/tests", &size);
-   fail_if(!test);
-   fail_if(size != (int)strlen(buffer) + 1);
-
-   fail_if(memcmp(test, buffer, strlen(buffer) + 1) != 0);
-
-   test = eet_read(ef, "keys/alias2", &size);
-   fail_if(!test);
-   fail_if(size != (int)strlen(buffer) + 1);
-
-   fail_if(eet_read_direct(ef, "key/alias2", &size));
-
-   fail_if(eet_mode_get(ef) != EET_FILE_MODE_READ);
-   fail_if(eet_num_entries(ef) != 3);
-
-   eet_close(ef);
-
-   /* Test eet cache system */
-   ef = eet_open(file, EET_FILE_MODE_READ);
-   fail_if(!ef);
-
-   test = eet_read(ef, "keys/tests", &size);
-   fail_if(!test);
-   fail_if(size != (int)strlen(buffer) + 1);
-
-   fail_if(memcmp(test, buffer, strlen(buffer) + 1) != 0);
-
-   eet_close(ef);
-
-   fail_if(unlink(file) != 0);
-
-   eet_shutdown();
-} /* START_TEST */
-
-END_TEST
-START_TEST(eet_file_data_test)
-{
-   Eet_Data_Descriptor *edd;
-   Eet_Test_Ex_Type *result;
-   Eet_Dictionary *ed;
-   Eet_File *ef;
-   char **list;
-   char *file = strdup("/tmp/eet_suite_testXXXXXX");
-   Eet_Data_Descriptor_Class eddc;
-   Eet_Test_Ex_Type etbt;
-   int size;
-   int test;
-
-   eet_init();
-
-   _eet_test_ex_set(&etbt, 0);
-   etbt.list = eina_list_prepend(etbt.list, _eet_test_ex_set(NULL, 1));
-   etbt.list = eina_list_prepend(etbt.list, _eet_test_ex_set(NULL, 1));
-   etbt.hash = eina_hash_string_superfast_new(NULL);
-   eina_hash_add(etbt.hash, EET_TEST_KEY1, _eet_test_ex_set(NULL, 2));
-   etbt.hash = eina_hash_string_superfast_new(NULL);
-   eina_hash_add(etbt.hash, EET_TEST_KEY2, _eet_test_ex_set(NULL, 2));
-   etbt.ilist = eina_list_prepend(etbt.ilist, &i42);
-   etbt.ilist = eina_list_prepend(etbt.ilist, &i42);
-   etbt.ihash = eina_hash_string_superfast_new(NULL);
-   eina_hash_add(etbt.ihash, EET_TEST_KEY1, &i7);
-   etbt.ihash = eina_hash_string_superfast_new(NULL);
-   eina_hash_add(etbt.ihash, EET_TEST_KEY2, &i7);
-   etbt.slist = eina_list_prepend(NULL, "test");
-   etbt.shash = eina_hash_string_superfast_new(NULL);
-   eina_hash_add(etbt.shash, EET_TEST_KEY1, "test");
-   memset(&etbt.charray, 0, sizeof(etbt.charray));
-   etbt.charray[0] = "test";
-
-   eet_test_setup_eddc(&eddc);
-   eddc.name = "Eet_Test_Ex_Type";
-   eddc.size = sizeof(Eet_Test_Ex_Type);
-
-   edd = eet_data_descriptor_file_new(&eddc);
-   fail_if(!edd);
-
-   _eet_build_ex_descriptor(edd);
-
-   fail_if(!(file = tmpnam(file)));
-
-   /* Insert an error in etbt. */
-   etbt.i = 0;
-
-   /* Save the encoded data in a file. */
-   ef = eet_open(file, EET_FILE_MODE_READ_WRITE);
-   fail_if(!ef);
-
-   fail_if(!eet_data_write(ef, edd, EET_TEST_FILE_KEY1, &etbt, 0));
-
-   result = eet_data_read(ef, edd, EET_TEST_FILE_KEY1);
-   fail_if(!result);
-
-   fail_if(eet_mode_get(ef) != EET_FILE_MODE_READ_WRITE);
-
-   /* Test string space. */
-   ed = eet_dictionary_get(ef);
-
-   fail_if(!eet_dictionary_string_check(ed, result->str));
-   fail_if(eet_dictionary_string_check(ed, result->istr));
-
-   eet_close(ef);
-
-   /* Attempt to replace etbt by the correct one. */
-   etbt.i = EET_TEST_INT;
-
-   ef = eet_open(file, EET_FILE_MODE_READ_WRITE);
-   fail_if(!ef);
-
-   fail_if(!eet_data_write(ef, edd, EET_TEST_FILE_KEY1, &etbt, 0));
-
-   result = eet_data_read(ef, edd, EET_TEST_FILE_KEY1);
-   fail_if(!result);
-
-   /* Test the resulting data. */
-   fail_if(_eet_test_ex_check(result, 0) != 0);
-
-   eet_close(ef);
-
-   /* Read back the data. */
-   ef = eet_open(file, EET_FILE_MODE_READ_WRITE);
-   fail_if(!ef);
-
-   fail_if(!eet_data_write(ef, edd, EET_TEST_FILE_KEY2, &etbt, 0));
-
-   result = eet_data_read(ef, edd, EET_TEST_FILE_KEY1);
-   fail_if(!result);
-
-   /* Test string space. */
-   ed = eet_dictionary_get(ef);
-   fail_if(!ed);
-
-   fail_if(!eet_dictionary_string_check(ed, result->str));
-   fail_if(eet_dictionary_string_check(ed, result->istr));
-
-   /* Test the resulting data. */
-   fail_if(_eet_test_ex_check(result, 0) != 0);
-   fail_if(_eet_test_ex_check(eina_list_data_get(result->list), 1) != 0);
-   fail_if(eina_list_data_get(result->ilist) == NULL);
-   fail_if(*((int *)eina_list_data_get(result->ilist)) != 42);
-   fail_if(eina_list_data_get(result->slist) == NULL);
-   fail_if(strcmp(eina_list_data_get(result->slist), "test") != 0);
-   fail_if(eina_hash_find(result->shash, EET_TEST_KEY1) == NULL);
-   fail_if(strcmp(eina_hash_find(result->shash, EET_TEST_KEY1), "test") != 0);
-   fail_if(strcmp(result->charray[0], "test") != 0);
-
-   test = 0;
-   if (result->hash)
-     eina_hash_foreach(result->hash, func, &test);
-
-   fail_if(test != 0);
-   if (result->ihash)
-     eina_hash_foreach(result->ihash, func7, &test);
-
-   fail_if(test != 0);
-
-   list = eet_list(ef, "keys/*", &size);
-   fail_if(eet_num_entries(ef) != 2);
-   fail_if(size != 2);
-   fail_if(!(strcmp(list[0],
-                    EET_TEST_FILE_KEY1) == 0 &&
-             strcmp(list[1], EET_TEST_FILE_KEY2) == 0)
-           && !(strcmp(list[0],
-                       EET_TEST_FILE_KEY2) == 0 &&
-                strcmp(list[1], EET_TEST_FILE_KEY1) == 0));
-   free(list);
-
-   fail_if(eet_delete(ef, NULL) != 0);
-   fail_if(eet_delete(NULL, EET_TEST_FILE_KEY1) != 0);
-   fail_if(eet_delete(ef, EET_TEST_FILE_KEY1) == 0);
-
-   list = eet_list(ef, "keys/*", &size);
-   fail_if(size != 1);
-   fail_if(eet_num_entries(ef) != 1);
-
-   /* Test some more wrong case */
-   fail_if(eet_data_read(ef, edd, "plop") != NULL);
-   fail_if(eet_data_read(ef, edd, EET_TEST_FILE_KEY1) != NULL);
-
-   /* Reinsert and reread data */
-   fail_if(!eet_data_write(ef, edd, EET_TEST_FILE_KEY1, &etbt, 0));
-   fail_if(eet_data_read(ef, edd, EET_TEST_FILE_KEY1) == NULL);
-   fail_if(eet_read_direct(ef, EET_TEST_FILE_KEY1, &size) == NULL);
-
-   eet_close(ef);
-
-   fail_if(unlink(file) != 0);
-
-   eet_shutdown();
-} /* START_TEST */
-
-END_TEST
-START_TEST(eet_file_data_dump_test)
-{
-   Eet_Data_Descriptor *edd;
-   Eet_Test_Ex_Type *result;
-   Eet_Data_Descriptor_Class eddc;
-   Eet_Test_Ex_Type etbt;
-   Eet_File *ef;
-   char *string1;
-   char *file = strdup("/tmp/eet_suite_testXXXXXX");
-   int test;
-
-   eet_init();
-
-   _eet_test_ex_set(&etbt, 0);
-   etbt.list = eina_list_prepend(etbt.list, _eet_test_ex_set(NULL, 1));
-   etbt.list = eina_list_prepend(etbt.list, _eet_test_ex_set(NULL, 1));
-   etbt.hash = eina_hash_string_superfast_new(NULL);
-   eina_hash_add(etbt.hash, EET_TEST_KEY1, _eet_test_ex_set(NULL, 2));
-   eina_hash_add(etbt.hash, EET_TEST_KEY2, _eet_test_ex_set(NULL, 2));
-   etbt.ilist = eina_list_prepend(etbt.ilist, &i42);
-   etbt.ilist = eina_list_prepend(etbt.ilist, &i42);
-   etbt.ihash = eina_hash_string_superfast_new(NULL);
-   eina_hash_add(etbt.ihash, EET_TEST_KEY1, &i7);
-   eina_hash_add(etbt.ihash, EET_TEST_KEY2, &i7);
-   etbt.slist = eina_list_prepend(NULL, "test");
-   etbt.shash = eina_hash_string_superfast_new(NULL);
-   eina_hash_add(etbt.shash, EET_TEST_KEY1, "test");
-   memset(&etbt.charray, 0, sizeof(etbt.charray));
-   etbt.charray[0] = "test";
-
-   eet_eina_file_data_descriptor_class_set(&eddc, sizeof (eddc),
-                                           "Eet_Test_Ex_Type",
-                                           sizeof(Eet_Test_Ex_Type));
-
-   edd = eet_data_descriptor_file_new(&eddc);
-   fail_if(!edd);
-
-   _eet_build_ex_descriptor(edd);
-
-   fail_if(!(file = tmpnam(file)));
-
-   /* Save the encoded data in a file. */
-   ef = eet_open(file, EET_FILE_MODE_WRITE);
-   fail_if(!ef);
-
-   fail_if(!eet_data_write(ef, edd, EET_TEST_FILE_KEY1, &etbt, 0));
-
-   eet_close(ef);
-
-   /* Use dump/undump in the middle */
-   ef = eet_open(file, EET_FILE_MODE_READ_WRITE);
-   fail_if(!ef);
-
-   string1 = NULL;
-   fail_if(eet_data_dump(ef, EET_TEST_FILE_KEY1, append_string, &string1) != 1);
-   fail_if(eet_delete(ef, EET_TEST_FILE_KEY1) == 0);
-   fail_if(!eet_data_undump(ef, EET_TEST_FILE_KEY1, string1, strlen(string1), 1));
-
-   eet_close(ef);
-
-   /* Test the correctness of the reinsertion. */
-   ef = eet_open(file, EET_FILE_MODE_READ);
-   fail_if(!ef);
-
-   result = eet_data_read(ef, edd, EET_TEST_FILE_KEY1);
-   fail_if(!result);
-
-   eet_close(ef);
-
-   /* Test the resulting data. */
-   fail_if(_eet_test_ex_check(result, 0) != 0);
-   fail_if(_eet_test_ex_check(eina_list_data_get(result->list), 1) != 0);
-   fail_if(eina_list_data_get(result->ilist) == NULL);
-   fail_if(*((int *)eina_list_data_get(result->ilist)) != 42);
-   fail_if(eina_list_data_get(result->slist) == NULL);
-   fail_if(strcmp(eina_list_data_get(result->slist), "test") != 0);
-   fail_if(eina_hash_find(result->shash, EET_TEST_KEY1) == NULL);
-   fail_if(strcmp(eina_hash_find(result->shash, EET_TEST_KEY1), "test") != 0);
-   fail_if(strcmp(result->charray[0], "test") != 0);
-
-   test = 0;
-   if (result->hash)
-     eina_hash_foreach(result->hash, func, &test);
-
-   fail_if(test != 0);
-   if (result->ihash)
-     eina_hash_foreach(result->ihash, func7, &test);
-
-   fail_if(test != 0);
-
-   fail_if(unlink(file) != 0);
-
-   eet_shutdown();
-} /* START_TEST */
-
-END_TEST
-START_TEST(eet_image)
-{
-   Eet_File *ef;
-   char *file = strdup("/tmp/eet_suite_testXXXXXX");
-   unsigned int *data;
-   int compress;
-   int quality;
-   int result;
-   int lossy;
-   int alpha;
-   unsigned int w;
-   unsigned int h;
-
-   eet_init();
-
-   fail_if(!(file = tmpnam(file)));
-
-   /* Save the encoded data in a file. */
-   ef = eet_open(file, EET_FILE_MODE_READ_WRITE);
-   fail_if(!ef);
-
-   result = eet_data_image_write(ef,
-                                 EET_TEST_FILE_IMAGE "0",
-                                 test_noalpha.color,
-                                 test_noalpha.w,
-                                 test_noalpha.h,
-                                 test_noalpha.alpha,
-                                 0,
-                                 100,
-                                 0);
-   fail_if(result == 0);
-
-   result = eet_data_image_write(ef,
-                                 EET_TEST_FILE_IMAGE "1",
-                                 test_noalpha.color,
-                                 test_noalpha.w,
-                                 test_noalpha.h,
-                                 test_noalpha.alpha,
-                                 5,
-                                 100,
-                                 0);
-   fail_if(result == 0);
-
-   result = eet_data_image_write(ef,
-                                 EET_TEST_FILE_IMAGE "2",
-                                 test_noalpha.color,
-                                 test_noalpha.w,
-                                 test_noalpha.h,
-                                 test_noalpha.alpha,
-                                 9,
-                                 100,
-                                 0);
-   fail_if(result == 0);
-
-   result = eet_data_image_write(ef,
-                                 EET_TEST_FILE_IMAGE "3",
-                                 test_noalpha.color,
-                                 test_noalpha.w,
-                                 test_noalpha.h,
-                                 test_noalpha.alpha,
-                                 0,
-                                 100,
-                                 1);
-   fail_if(result == 0);
-
-   result = eet_data_image_write(ef,
-                                 EET_TEST_FILE_IMAGE "4",
-                                 test_noalpha.color,
-                                 test_noalpha.w,
-                                 test_noalpha.h,
-                                 test_noalpha.alpha,
-                                 0,
-                                 60,
-                                 1);
-   fail_if(result == 0);
-
-   result = eet_data_image_write(ef,
-                                 EET_TEST_FILE_IMAGE "5",
-                                 test_noalpha.color,
-                                 test_noalpha.w,
-                                 test_noalpha.h,
-                                 test_noalpha.alpha,
-                                 0,
-                                 10,
-                                 1);
-   fail_if(result == 0);
-
-   result = eet_data_image_write(ef,
-                                 EET_TEST_FILE_IMAGE "6",
-                                 test_noalpha.color,
-                                 test_noalpha.w,
-                                 test_noalpha.h,
-                                 test_noalpha.alpha,
-                                 0,
-                                 0,
-                                 1);
-   fail_if(result == 0);
-
-   result = eet_data_image_write(ef, EET_TEST_FILE_IMAGE "7", test_alpha.color,
-                                 test_alpha.w, test_alpha.h, test_alpha.alpha,
-                                 9, 100, 0);
-   fail_if(result == 0);
-
-   result = eet_data_image_write(ef, EET_TEST_FILE_IMAGE "8", test_alpha.color,
-                                 test_alpha.w, test_alpha.h, test_alpha.alpha,
-                                 0, 80, 1);
-   fail_if(result == 0);
-
-   result = eet_data_image_write(ef, EET_TEST_FILE_IMAGE "9", test_alpha.color,
-                                 test_alpha.w, test_alpha.h, test_alpha.alpha,
-                                 0, 100, 1);
-   fail_if(result == 0);
-
-   data = eet_data_image_read(ef,
-                              EET_TEST_FILE_IMAGE "2",
-                              &w,
-                              &h,
-                              &alpha,
-                              &compress,
-                              &quality,
-                              &lossy);
-   fail_if(data == NULL);
-   fail_if(w != test_noalpha.w);
-   fail_if(h != test_noalpha.h);
-   fail_if(alpha != test_noalpha.alpha);
-   fail_if(compress != 9);
-   fail_if(lossy != 0);
-   fail_if(data[0] != test_noalpha.color[0]);
-   free(data);
-
-   result = eet_data_image_header_read(ef,
-                                       EET_TEST_FILE_IMAGE "2",
-                                       &w,
-                                       &h,
-                                       &alpha,
-                                       &compress,
-                                       &quality,
-                                       &lossy);
-   fail_if(result == 0);
-   fail_if(w != test_noalpha.w);
-   fail_if(h != test_noalpha.h);
-   fail_if(alpha != test_noalpha.alpha);
-   fail_if(compress != 9);
-   fail_if(lossy != 0);
-
-   eet_close(ef);
-
-   /* Test read of image */
-   ef = eet_open(file, EET_FILE_MODE_READ);
-   fail_if(!ef);
-
-   result = eet_data_image_header_read(ef,
-                                       EET_TEST_FILE_IMAGE "0",
-                                       &w,
-                                       &h,
-                                       &alpha,
-                                       &compress,
-                                       &quality,
-                                       &lossy);
-   fail_if(result == 0);
-   fail_if(w != test_noalpha.w);
-   fail_if(h != test_noalpha.h);
-   fail_if(alpha != test_noalpha.alpha);
-   fail_if(compress != 0);
-   fail_if(lossy != 0);
-
-   data = malloc(w * h * 4);
-   fail_if(data == NULL);
-   result = eet_data_image_read_to_surface(ef,
-                                           EET_TEST_FILE_IMAGE "0",
-                                           4,
-                                           4,
-                                           data,
-                                           2,
-                                           2,
-                                           w * 4,
-                                           &alpha,
-                                           &compress,
-                                           &quality,
-                                           &lossy);
-   fail_if(result != 1);
-   fail_if(alpha != test_noalpha.alpha);
-   fail_if(compress != 0);
-   fail_if(quality != 100);
-   fail_if(lossy != 0);
-   fail_if(data[0] != test_noalpha.color[4 + 4 * w]);
-   free(data);
-
-   data = malloc(w * h * 4);
-   fail_if(data == NULL);
-   result = eet_data_image_read_to_surface(ef,
-                                           EET_TEST_FILE_IMAGE "0",
-                                           0,
-                                           0,
-                                           data,
-                                           w,
-                                           h,
-                                           w * 4,
-                                           &alpha,
-                                           &compress,
-                                           &quality,
-                                           &lossy);
-   fail_if(result != 1);
-   fail_if(alpha != test_noalpha.alpha);
-   fail_if(compress != 0);
-   fail_if(quality != 100);
-   fail_if(lossy != 0);
-   fail_if(data[0] != test_noalpha.color[0]);
-   free(data);
-
-   data = eet_data_image_read(ef,
-                              EET_TEST_FILE_IMAGE "1",
-                              &w,
-                              &h,
-                              &alpha,
-                              &compress,
-                              &quality,
-                              &lossy);
-   fail_if(data == NULL);
-   fail_if(w != test_noalpha.w);
-   fail_if(h != test_noalpha.h);
-   fail_if(alpha != test_noalpha.alpha);
-   fail_if(compress != 5);
-   fail_if(quality != 100);
-   fail_if(lossy != 0);
-   fail_if(data[0] != test_noalpha.color[0]);
-   free(data);
-
-   data = eet_data_image_read(ef,
-                              EET_TEST_FILE_IMAGE "2",
-                              &w,
-                              &h,
-                              &alpha,
-                              &compress,
-                              &quality,
-                              &lossy);
-   fail_if(data == NULL);
-   fail_if(w != test_noalpha.w);
-   fail_if(h != test_noalpha.h);
-   fail_if(alpha != test_noalpha.alpha);
-   fail_if(compress != 9);
-   fail_if(lossy != 0);
-   fail_if(data[0] != test_noalpha.color[0]);
-   free(data);
-
-   data = eet_data_image_read(ef,
-                              EET_TEST_FILE_IMAGE "3",
-                              &w,
-                              &h,
-                              &alpha,
-                              &compress,
-                              &quality,
-                              &lossy);
-   fail_if(data == NULL);
-   fail_if(w != test_noalpha.w);
-   fail_if(h != test_noalpha.h);
-   fail_if(alpha != test_noalpha.alpha);
-   fail_if(lossy != 1);
-   free(data);
-
-   data = eet_data_image_read(ef,
-                              EET_TEST_FILE_IMAGE "5",
-                              &w,
-                              &h,
-                              &alpha,
-                              &compress,
-                              &quality,
-                              &lossy);
-   fail_if(data == NULL);
-   fail_if(w != test_noalpha.w);
-   fail_if(h != test_noalpha.h);
-   fail_if(alpha != test_noalpha.alpha);
-   fail_if(lossy != 1);
-   free(data);
-
-   data = eet_data_image_read(ef,
-                              EET_TEST_FILE_IMAGE "6",
-                              &w,
-                              &h,
-                              &alpha,
-                              &compress,
-                              &quality,
-                              &lossy);
-   fail_if(data == NULL);
-   fail_if(w != test_noalpha.w);
-   fail_if(h != test_noalpha.h);
-   fail_if(alpha != test_noalpha.alpha);
-   fail_if(lossy != 1);
-   free(data);
-
-   result = eet_data_image_header_read(ef,
-                                       EET_TEST_FILE_IMAGE "7",
-                                       &w,
-                                       &h,
-                                       &alpha,
-                                       &compress,
-                                       &quality,
-                                       &lossy);
-   fail_if(result == 0);
-   fail_if(w != test_alpha.w);
-   fail_if(h != test_alpha.h);
-   fail_if(alpha != test_alpha.alpha);
-   fail_if(compress != 9);
-   fail_if(lossy != 0);
-
-   data = eet_data_image_read(ef,
-                              EET_TEST_FILE_IMAGE "7",
-                              &w,
-                              &h,
-                              &alpha,
-                              &compress,
-                              &quality,
-                              &lossy);
-   fail_if(data == NULL);
-   fail_if(w != test_alpha.w);
-   fail_if(h != test_alpha.h);
-   fail_if(alpha != test_alpha.alpha);
-   fail_if(compress != 9);
-   fail_if(lossy != 0);
-   fail_if(data[0] != test_alpha.color[0]);
-   free(data);
-
-   result = eet_data_image_header_read(ef,
-                                       EET_TEST_FILE_IMAGE "9",
-                                       &w,
-                                       &h,
-                                       &alpha,
-                                       &compress,
-                                       &quality,
-                                       &lossy);
-   fail_if(result == 0);
-   fail_if(w != test_alpha.w);
-   fail_if(h != test_alpha.h);
-   fail_if(alpha != test_alpha.alpha);
-   fail_if(lossy != 1);
-
-   data = eet_data_image_read(ef,
-                              EET_TEST_FILE_IMAGE "9",
-                              &w,
-                              &h,
-                              &alpha,
-                              &compress,
-                              &quality,
-                              &lossy);
-   fail_if(data == NULL);
-   fail_if(w != test_alpha.w);
-   fail_if(h != test_alpha.h);
-   fail_if(alpha != test_alpha.alpha);
-   fail_if(lossy != 1);
-   free(data);
-
-   eet_close(ef);
-
-   fail_if(unlink(file) != 0);
-
-   eet_shutdown();
-} /* START_TEST */
-
-END_TEST
-
-#define IM0 0x00112233
-#define IM1 0x44556677
-#define IM2 0x8899aabb
-#define IM3 0xccddeeff
-
-START_TEST(eet_small_image)
-{
-   char *file = strdup("/tmp/eet_suite_testXXXXXX");
-   unsigned int image[4];
-   unsigned int *data;
-   Eet_File *ef;
-   unsigned int w;
-   unsigned int h;
-   int alpha;
-   int compression;
-   int quality;
-   int lossy;
-   int result;
-
-   image[0] = IM0;
-   image[1] = IM1;
-   image[2] = IM2;
-   image[3] = IM3;
-
-   eet_init();
-
-   fail_if(!(file = tmpnam(file)));
-
-   ef = eet_open(file, EET_FILE_MODE_WRITE);
-   fail_if(!ef);
-
-   result = eet_data_image_write(ef, "/images/test", image, 2, 2, 1, 9, 100, 0);
-   fail_if(result == 0);
-
-   eet_close(ef);
-
-   ef = eet_open(file, EET_FILE_MODE_READ);
-   fail_if(!ef);
-
-   data = (unsigned int *)eet_data_image_read(ef,
-                                              "/images/test",
-                                              &w,
-                                              &h,
-                                              &alpha,
-                                              &compression,
-                                              &quality,
-                                              &lossy);
-   fail_if(data == NULL);
-
-   eet_close(ef);
-
-   fail_if(unlink(file) != 0);
-
-   fail_if(data[0] != IM0);
-   fail_if(data[1] != IM1);
-   fail_if(data[2] != IM2);
-   fail_if(data[3] != IM3);
-
-   free(data);
-
-   eet_shutdown();
-} /* START_TEST */
-
-END_TEST
-START_TEST(eet_identity_simple)
-{
-   const char *buffer = "Here is a string of data to save !";
-   const void *tmp;
-   Eet_File *ef;
-   Eet_Key *k;
-   FILE *noread;
-   char *test;
-   char *file = strdup("/tmp/eet_suite_testXXXXXX");
-   int size;
-   int fd;
-
-   eet_init();
-
-   fail_if(!(file = tmpnam(file)));
-   fail_if(chdir(CERT_DIR));
-   fail_if(!(noread = fopen("/dev/null", "w")));
-
-   /* Sign an eet file. */
-   ef = eet_open(file, EET_FILE_MODE_WRITE);
-   fail_if(!ef);
-
-   fail_if(!eet_write(ef, "keys/tests", buffer, strlen(buffer) + 1, 0));
-
-   k = eet_identity_open("cert.pem", "key.pem", NULL);
-   fail_if(!k);
-
-   fail_if(eet_identity_set(ef, k) != EET_ERROR_NONE);
-   eet_identity_print(k, noread);
-
-   eet_close(ef);
-
-   /* Open a signed file. */
-   ef = eet_open(file, EET_FILE_MODE_READ);
-   fail_if(!ef);
-
-   test = eet_read(ef, "keys/tests", &size);
-   fail_if(!test);
-   fail_if(size != (int)strlen(buffer) + 1);
-
-   fail_if(memcmp(test, buffer, strlen(buffer) + 1) != 0);
-
-   tmp = eet_identity_x509(ef, &size);
-   fail_if(tmp == NULL);
-
-   eet_identity_certificate_print(tmp, size, noread);
-
-   eet_close(ef);
-
-   /* As we are changing file contain in less than 1s, this could get unnoticed
-      by eet cache system. */
-   eet_clearcache();
-
-   /* Corrupting the file. */
-   fd = open(file, O_WRONLY);
-   fail_if(fd < 0);
-
-   fail_if(lseek(fd, 200, SEEK_SET) != 200);
-   fail_if(write(fd, "42", 2) != 2);
-   fail_if(lseek(fd, 50, SEEK_SET) != 50);
-   fail_if(write(fd, "42", 2) != 2);
-   fail_if(lseek(fd, 88, SEEK_SET) != 88);
-   fail_if(write(fd, "42", 2) != 2);
-
-   close(fd);
-
-   /* Attempt to open a modified file. */
-   ef = eet_open(file, EET_FILE_MODE_READ);
-   fail_if(ef);
-
-   fail_if(unlink(file) != 0);
-
-   eet_shutdown();
-} /* START_TEST */
-
-END_TEST
-START_TEST(eet_identity_open_simple)
-{
-   Eet_Key *k = NULL;
-
-   eet_init();
-
-   fail_if(chdir(CERT_DIR));
-
-   k = eet_identity_open("cert.pem", "key.pem", NULL);
-   fail_if(!k);
-
-   if (k)
-     eet_identity_close(k);
-
-   eet_shutdown();
-} /* START_TEST */
-
-END_TEST
-START_TEST(eet_identity_open_pkcs8)
-{
-   Eet_Key *k = NULL;
-
-   eet_init();
-
-   fail_if(chdir(CERT_DIR));
-
-   k = eet_identity_open("cert.pem", "key_enc_none.pem", NULL);
-   fail_if(!k);
-
-   if (k)
-     eet_identity_close(k);
-
-   eet_shutdown();
-} /* START_TEST */
-
-END_TEST
-
-static int
-pass_get(char            *pass,
-         int              size,
-         __UNUSED__ int   rwflags,
-         __UNUSED__ void *u)
-{
-   memset(pass, 0, size);
-
-   if ((int)strlen("password") > size)
-     return 0;
-
-   snprintf(pass, size, "%s", "password");
-   return strlen(pass);
-} /* pass_get */
-
-static int
-badpass_get(char            *pass,
-            int              size,
-            __UNUSED__ int   rwflags,
-            __UNUSED__ void *u)
-{
-   memset(pass, 0, size);
-
-   if ((int)strlen("bad password") > size)
-     return 0;
-
-   snprintf(pass, size, "%s", "bad password");
-   return strlen(pass);
-} /* badpass_get */
-
-START_TEST(eet_identity_open_pkcs8_enc)
-{
-   Eet_Key *k = NULL;
-
-   eet_init();
-
-   fail_if(chdir(CERT_DIR));
-
-   k = eet_identity_open("cert.pem", "key_enc.pem", NULL);
-   fail_if(k);
-
-   if (k)
-     eet_identity_close(k);
-
-   k = eet_identity_open("cert.pem", "key_enc.pem", &badpass_get);
-   fail_if(k);
-
-   if (k)
-     eet_identity_close(k);
-
-   k = eet_identity_open("cert.pem", "key_enc.pem", &pass_get);
-   fail_if(!k);
-
-   if (k)
-     eet_identity_close(k);
-
-   eet_shutdown();
-}
-END_TEST
-START_TEST(eet_cipher_decipher_simple)
-{
-   const char *buffer = "Here is a string of data to save !";
-   const char *key = "This is a crypto key";
-   const char *key_bad = "This is another crypto key";
-   Eet_File *ef;
-   char *test;
-   char *file = strdup("/tmp/eet_suite_testXXXXXX");
-   int size;
-
-   eet_init();
-
-   fail_if(!(file = tmpnam(file)));
-   fail_if(chdir(CERT_DIR));
-
-   /* Crypt an eet file. */
-   ef = eet_open(file, EET_FILE_MODE_WRITE);
-   fail_if(!ef);
-
-   fail_if(!eet_write_cipher(ef, "keys/tests", buffer, strlen(buffer) + 1, 0,
-                             key));
-
-   eet_close(ef);
-
-   /* Decrypt an eet file. */
-   ef = eet_open(file, EET_FILE_MODE_READ);
-   fail_if(!ef);
-
-   test = eet_read_cipher(ef, "keys/tests", &size, key);
-   fail_if(!test);
-   fail_if(size != (int)strlen(buffer) + 1);
-
-   fail_if(memcmp(test, buffer, strlen(buffer) + 1) != 0);
-
-   eet_close(ef);
-
-   /* Decrypt an eet file. */
-   ef = eet_open(file, EET_FILE_MODE_READ);
-   fail_if(!ef);
-
-   test = eet_read_cipher(ef, "keys/tests", &size, key_bad);
-
-   if (size == (int)strlen(buffer) + 1)
-     fail_if(memcmp(test, buffer, strlen(buffer) + 1) == 0);
-
-   eet_close(ef);
-
-   fail_if(unlink(file) != 0);
-
-   eet_shutdown();
-} /* START_TEST */
-
-END_TEST
-
-#ifdef EINA_HAVE_THREADS
-
-static Eina_Bool open_worker_stop;
-
-# ifdef _EET_INCLUDED_PTHREAD
-
-static void *
-open_close_worker(void *path)
-{
-   while (!open_worker_stop)
-     {
-        Eet_File *ef = eet_open((char const *)path, EET_FILE_MODE_READ);
-        if (ef == NULL)
-          pthread_exit("eet_open() failed");
-        else
-          {
-             Eet_Error err_code = eet_close(ef);
-             if (err_code != EET_ERROR_NONE)
-               pthread_exit("eet_close() failed");
-          }
-     }
-
-   pthread_exit(NULL);
-} /* open_close_worker */
-
-# else /* ifdef _EET_INCLUDED_PTHREAD */
-
-static unsigned int __stdcall
-open_close_worker(void *path)
-{
-   while (!open_worker_stop)
-     {
-        Eet_File *ef = eet_open((char const *)path, EET_FILE_MODE_READ);
-        if (ef == NULL)
-          _endthreadex(-1);
-        else
-          {
-             Eet_Error err_code = eet_close(ef);
-             if (err_code != EET_ERROR_NONE)
-               _endthreadex(-2);
-          }
-     }
-
-   _endthreadex(0);
-} /* open_close_worker */
-
-# endif /* ifdef _EET_INCLUDED_PTHREAD */
-
-START_TEST(eet_cache_concurrency)
-{
-   char *file = strdup("/tmp/eet_suite_testXXXXXX");
-   const char *buffer = "test data";
-   Eet_File *ef;
-   void *thread_ret;
-   unsigned int n;
-# ifdef _EET_INCLUDED_PTHREAD
-   pthread_t thread;
-# else /* ifdef _EET_INCLUDED_PTHREAD */
-   uintptr_t thread;
-   unsigned int thread_id;
-   DWORD ret;
-# endif /* ifdef _EET_INCLUDED_PTHREAD */
-
-   eet_init();
-   eina_threads_init();
-
-   /* create a file to test with */
-   fail_if(!(file = tmpnam(file)));
-   ef = eet_open(file, EET_FILE_MODE_WRITE);
-   fail_if(!ef);
-   fail_if(!eet_write(ef, "keys/tests", buffer, strlen(buffer) + 1, 0));
-
-   /* start a thread that repeatedly opens and closes a file */
-   open_worker_stop = 0;
-# ifdef _EET_INCLUDED_PTHREAD
-   pthread_create(&thread, NULL, open_close_worker, file);
-# else /* ifdef _EET_INCLUDED_PTHREAD */
-   thread = _beginthreadex(NULL, 0, open_close_worker, file, 0, &thread_id);
-# endif /* ifdef _EET_INCLUDED_PTHREAD */
-   /* clear the cache repeatedly in this thread */
-   for (n = 0; n < 20000; ++n)
-     {
-        eet_clearcache();
-     }
-
-   /* join the other thread, and fail if it returned an error message */
-   open_worker_stop = 1;
-# ifdef _EET_INCLUDED_PTHREAD
-   fail_if(pthread_join(thread, &thread_ret) != 0);
-   fail_unless(thread_ret == NULL, (char const *)thread_ret);
-# else /* ifdef _EET_INCLUDED_PTHREAD */
-   ret = WaitForSingleObject((HANDLE)thread, INFINITE);
-   fail_if(ret != WAIT_OBJECT_0);
-   fail_if(GetExitCodeThread((HANDLE)thread, &ret) == FALSE);
-   fail_if(ret != 0);
-# endif /* ifdef _EET_INCLUDED_PTHREAD */
-
-   fail_if(unlink(file) != 0);
-
-   eina_threads_shutdown();
-   eet_shutdown();
-}
-END_TEST
-
-#endif /* EINA_HAVE_THREADS */
-
-typedef struct _Eet_Connection_Data Eet_Connection_Data;
-struct _Eet_Connection_Data
-{
-   Eet_Connection      *conn;
-   Eet_Data_Descriptor *edd;
-   Eina_Bool            test;
-};
-
-static Eina_Bool
-_eet_connection_read(const void *eet_data,
-                     size_t      size,
-                     void       *user_data)
-{
-   Eet_Connection_Data *dt = user_data;
-   Eet_Test_Ex_Type *result;
-   Eet_Node *node;
-   int test;
-
-   result = eet_data_descriptor_decode(dt->edd, eet_data, size);
-   node = eet_data_node_decode_cipher(eet_data, NULL, size);
-
-   /* Test the resulting data. */
-   fail_if(!node);
-   fail_if(_eet_test_ex_check(result, 0) != 0);
-   fail_if(_eet_test_ex_check(eina_list_data_get(result->list), 1) != 0);
-   fail_if(eina_list_data_get(result->ilist) == NULL);
-   fail_if(*((int *)eina_list_data_get(result->ilist)) != 42);
-   fail_if(eina_list_data_get(result->slist) == NULL);
-   fail_if(strcmp(eina_list_data_get(result->slist), "test") != 0);
-   fail_if(eina_hash_find(result->shash, EET_TEST_KEY1) == NULL);
-   fail_if(strcmp(eina_hash_find(result->shash, EET_TEST_KEY1), "test") != 0);
-   fail_if(strcmp(result->charray[0], "test") != 0);
-
-   test = 0;
-   if (result->hash)
-     eina_hash_foreach(result->hash, func, &test);
-
-   fail_if(test != 0);
-   if (result->ihash)
-     eina_hash_foreach(result->ihash, func7, &test);
-
-   fail_if(test != 0);
-
-   if (!dt->test)
-     {
-        dt->test = EINA_TRUE;
-        fail_if(!eet_connection_node_send(dt->conn, node, NULL));
-     }
-
-   return EINA_TRUE;
-} /* _eet_connection_read */
-
-static Eina_Bool
-_eet_connection_write(const void *data,
-                      size_t      size,
-                      void       *user_data)
-{
-   Eet_Connection_Data *dt = user_data;
-   int still;
-
-   if (!dt->test)
-     {
-        int step = size / 3;
-
-        eet_connection_received(dt->conn, data, step);
-        eet_connection_received(dt->conn, (char *)data + step, step);
-        size -= 2 * step;
-        still = eet_connection_received(dt->conn, (char *)data + 2 * step, size);
-     }
-   else
-     still = eet_connection_received(dt->conn, data, size);
-
-   fail_if(still);
-
-   return EINA_TRUE;
-} /* _eet_connection_write */
-
-START_TEST(eet_connection_check)
-{
-   Eet_Connection *conn;
-   Eet_Data_Descriptor *edd;
-   Eet_Data_Descriptor_Class eddc;
-   Eet_Connection_Data ecd;
-   Eet_Test_Ex_Type etbt;
-   Eina_Bool on_going;
-
-   eet_init();
-
-   _eet_test_ex_set(&etbt, 0);
-   etbt.list = eina_list_prepend(etbt.list, _eet_test_ex_set(NULL, 1));
-   etbt.list = eina_list_prepend(etbt.list, _eet_test_ex_set(NULL, 1));
-   etbt.hash = eina_hash_string_superfast_new(NULL);
-   eina_hash_add(etbt.hash, EET_TEST_KEY1, _eet_test_ex_set(NULL, 2));
-   eina_hash_add(etbt.hash, EET_TEST_KEY2, _eet_test_ex_set(NULL, 2));
-   etbt.ilist = eina_list_prepend(etbt.ilist, &i42);
-   etbt.ilist = eina_list_prepend(etbt.ilist, &i42);
-   etbt.ihash = eina_hash_string_superfast_new(NULL);
-   eina_hash_add(etbt.ihash, EET_TEST_KEY1, &i7);
-   eina_hash_add(etbt.ihash, EET_TEST_KEY2, &i7);
-   etbt.slist = eina_list_prepend(NULL, "test");
-   etbt.shash = eina_hash_string_superfast_new(NULL);
-   eina_hash_add(etbt.shash, EET_TEST_KEY1, "test");
-   memset(&etbt.charray, 0, sizeof(etbt.charray));
-   etbt.charray[0] = "test";
-
-   eet_eina_file_data_descriptor_class_set(&eddc, sizeof (eddc),
-                                           "Eet_Test_Ex_Type",
-                                           sizeof(Eet_Test_Ex_Type));
-
-   edd = eet_data_descriptor_file_new(&eddc);
-   fail_if(!edd);
-
-   _eet_build_ex_descriptor(edd);
-
-   /* Create a connection. */
-   conn = eet_connection_new(_eet_connection_read, _eet_connection_write, &ecd);
-   fail_if(!conn);
-
-   /* Init context. */
-   ecd.test = EINA_FALSE;
-   ecd.conn = conn;
-   ecd.edd = edd;
-
-   /* Test the connection. */
-   fail_if(!eet_connection_send(conn, edd, &etbt, NULL));
-
-   fail_if(!ecd.test);
-
-   fail_if(!eet_connection_close(conn, &on_going));
-
-   fail_if(on_going);
-
-   eet_shutdown();
-}
-END_TEST
-
-struct _Eet_5FP
-{
-   Eina_F32p32 fp32;
-   Eina_F16p16 fp16;
-   Eina_F8p24  fp8;
-   Eina_F32p32 f1;
-   Eina_F32p32 f0;
-};
-typedef struct _Eet_5FP Eet_5FP;
-
-struct _Eet_5DBL
-{
-   double fp32;
-   double fp16;
-   float  fp8;
-   double f1;
-   double f0;
-};
-typedef struct _Eet_5DBL Eet_5DBL;
-
-START_TEST(eet_fp)
-{
-   Eet_Data_Descriptor_Class eddc;
-   Eet_Data_Descriptor *edd_5FP;
-   Eet_Data_Descriptor *edd_5DBL;
-   Eet_5FP origin;
-   Eet_5DBL *convert;
-   Eet_5FP *build;
-   void *blob;
-   int size;
-
-   eet_init();
-
-   EET_EINA_STREAM_DATA_DESCRIPTOR_CLASS_SET(&eddc, Eet_5FP);
-   edd_5FP = eet_data_descriptor_stream_new(&eddc);
-
-   EET_DATA_DESCRIPTOR_ADD_BASIC(edd_5FP, Eet_5FP, "fp32", fp32, EET_T_F32P32);
-   EET_DATA_DESCRIPTOR_ADD_BASIC(edd_5FP, Eet_5FP, "fp16", fp16, EET_T_F16P16);
-   EET_DATA_DESCRIPTOR_ADD_BASIC(edd_5FP, Eet_5FP, "fp8", fp8, EET_T_F8P24);
-   EET_DATA_DESCRIPTOR_ADD_BASIC(edd_5FP, Eet_5FP, "f1", f1, EET_T_F32P32);
-   EET_DATA_DESCRIPTOR_ADD_BASIC(edd_5FP, Eet_5FP, "f0", f0, EET_T_F32P32);
-
-   eet_eina_stream_data_descriptor_class_set(&eddc, sizeof (eddc), "Eet_5FP", sizeof (Eet_5DBL));
-   edd_5DBL = eet_data_descriptor_stream_new(&eddc);
-
-   EET_DATA_DESCRIPTOR_ADD_BASIC(edd_5DBL, Eet_5DBL, "fp32", fp32, EET_T_DOUBLE);
-   EET_DATA_DESCRIPTOR_ADD_BASIC(edd_5DBL, Eet_5DBL, "fp16", fp16, EET_T_DOUBLE);
-   EET_DATA_DESCRIPTOR_ADD_BASIC(edd_5DBL, Eet_5DBL, "fp8", fp8, EET_T_FLOAT);
-   EET_DATA_DESCRIPTOR_ADD_BASIC(edd_5DBL, Eet_5DBL, "f1", f1, EET_T_DOUBLE);
-   EET_DATA_DESCRIPTOR_ADD_BASIC(edd_5DBL, Eet_5DBL, "f0", f0, EET_T_DOUBLE);
-
-   origin.fp32 = eina_f32p32_double_from(1.125);
-   origin.fp16 = eina_f16p16_int_from(2000);
-   origin.fp8 = eina_f8p24_int_from(125);
-   origin.f1 = eina_f32p32_int_from(1);
-   origin.f0 = 0;
-
-   blob = eet_data_descriptor_encode(edd_5FP, &origin, &size);
-   fail_if(!blob || size <= 0);
-
-   build = eet_data_descriptor_decode(edd_5FP, blob, size);
-   fail_if(!build);
-
-   convert = eet_data_descriptor_decode(edd_5DBL, blob, size);
-   fail_if(!convert);
-
-   fail_if(build->fp32 != eina_f32p32_double_from(1.125));
-   fail_if(build->fp16 != eina_f16p16_int_from(2000));
-   fail_if(build->fp8 != eina_f8p24_int_from(125));
-   fail_if(build->f1 != eina_f32p32_int_from(1));
-   fail_if(build->f0 != 0);
-
-   fail_if(convert->fp32 != 1.125);
-   fail_if(convert->fp16 != 2000);
-   fail_if(convert->fp8 != 125);
-   fail_if(convert->f1 != 1);
-   fail_if(convert->f0 != 0);
-
-   eet_shutdown();
-}
-END_TEST
-START_TEST(eet_file_fp)
-{
-   char *file = strdup("/tmp/eet_suite_testXXXXXX");
-   Eet_Data_Descriptor_Class eddc;
-   Eet_Data_Descriptor *edd_5FP;
-   Eet_Data_Descriptor *edd_5DBL;
-   Eet_File *ef;
-   Eet_5FP origin;
-   Eet_5DBL *convert;
-   Eet_5FP *build;
-
-   eet_init();
-
-   EET_EINA_FILE_DATA_DESCRIPTOR_CLASS_SET(&eddc, Eet_5FP);
-   edd_5FP = eet_data_descriptor_file_new(&eddc);
-
-   EET_DATA_DESCRIPTOR_ADD_BASIC(edd_5FP, Eet_5FP, "fp32", fp32, EET_T_F32P32);
-   EET_DATA_DESCRIPTOR_ADD_BASIC(edd_5FP, Eet_5FP, "fp16", fp16, EET_T_F16P16);
-   EET_DATA_DESCRIPTOR_ADD_BASIC(edd_5FP, Eet_5FP, "fp8", fp8, EET_T_F8P24);
-   EET_DATA_DESCRIPTOR_ADD_BASIC(edd_5FP, Eet_5FP, "f1", f1, EET_T_F32P32);
-   EET_DATA_DESCRIPTOR_ADD_BASIC(edd_5FP, Eet_5FP, "f0", f0, EET_T_F32P32);
-
-   eet_eina_file_data_descriptor_class_set(&eddc, sizeof (eddc), "Eet_5FP", sizeof (Eet_5DBL));
-   edd_5DBL = eet_data_descriptor_file_new(&eddc);
-
-   EET_DATA_DESCRIPTOR_ADD_BASIC(edd_5DBL, Eet_5DBL, "fp32", fp32, EET_T_DOUBLE);
-   EET_DATA_DESCRIPTOR_ADD_BASIC(edd_5DBL, Eet_5DBL, "fp16", fp16, EET_T_DOUBLE);
-   EET_DATA_DESCRIPTOR_ADD_BASIC(edd_5DBL, Eet_5DBL, "fp8", fp8, EET_T_FLOAT);
-   EET_DATA_DESCRIPTOR_ADD_BASIC(edd_5DBL, Eet_5DBL, "f1", f1, EET_T_DOUBLE);
-   EET_DATA_DESCRIPTOR_ADD_BASIC(edd_5DBL, Eet_5DBL, "f0", f0, EET_T_DOUBLE);
-
-   origin.fp32 = eina_f32p32_double_from(1.125);
-   origin.fp16 = eina_f16p16_int_from(2000);
-   origin.fp8 = eina_f8p24_int_from(125);
-   origin.f1 = eina_f32p32_int_from(1);
-   origin.f0 = 0;
-
-   fail_if(!(file = tmpnam(file)));
-
-   ef = eet_open(file, EET_FILE_MODE_READ_WRITE);
-   fail_if(!ef);
-
-   fail_if(!eet_data_write(ef, edd_5FP, EET_TEST_FILE_KEY1, &origin, 1));
-
-   build = eet_data_read(ef, edd_5FP, EET_TEST_FILE_KEY1);
-   fail_if(!build);
-
-   convert = eet_data_read(ef, edd_5DBL, EET_TEST_FILE_KEY1);
-   fail_if(!convert);
-
-   fail_if(build->fp32 != eina_f32p32_double_from(1.125));
-   fail_if(build->fp16 != eina_f16p16_int_from(2000));
-   fail_if(build->fp8 != eina_f8p24_int_from(125));
-   fail_if(build->f1 != eina_f32p32_int_from(1));
-   fail_if(build->f0 != 0);
-
-   fail_if(convert->fp32 != 1.125);
-   fail_if(convert->fp16 != 2000);
-   fail_if(convert->fp8 != 125);
-   fail_if(convert->f1 != 1);
-   fail_if(convert->f0 != 0);
-
-   eet_close(ef);
-
-   fail_if(unlink(file) != 0);
-
-   eet_shutdown();
-} /* START_TEST */
-
-END_TEST
-
-typedef struct _Eet_Union_Test    Eet_Union_Test;
-typedef struct _Eet_Variant_Test  Eet_Variant_Test;
-typedef struct _Eet_Variant_Type  Eet_Variant_Type;
-typedef struct _Eet_Inherit_Test1 Eet_Inherit_Test1;
-typedef struct _Eet_Inherit_Test2 Eet_Inherit_Test2;
-typedef struct _Eet_Inherit_Test3 Eet_Inherit_Test3;
-typedef struct _Eet_St1           Eet_St1;
-typedef struct _Eet_St2           Eet_St2;
-typedef struct _Eet_St3           Eet_St3;
-typedef struct _Eet_List          Eet_List;
-
-typedef enum _Eet_Union
-{
-   EET_UNKNOWN,
-   EET_ST1,
-   EET_ST2,
-   EET_ST3
-} Eet_Union;
-
-struct
-{
-   Eet_Union   u;
-   const char *name;
-} eet_mapping[] = {
-   { EET_ST1, "ST1" },
-   { EET_ST2, "ST2" },
-   { EET_ST3, "ST3" },
-   { EET_UNKNOWN, NULL }
-};
-
-struct _Eet_St1
-{
-   double val1;
-   int    stuff;
-   char  *s1;
-};
-
-struct _Eet_St2
-{
-   Eina_Bool          b1;
-   unsigned long long v1;
-};
-
-struct _Eet_St3
-{
-   int boby;
-};
-
-struct _Eet_Union_Test
-{
-   Eet_Union type;
-
-   union {
-      Eet_St1 st1;
-      Eet_St2 st2;
-      Eet_St3 st3;
-   } u;
-};
-
-struct _Eet_Variant_Type
-{
-   const char *type;
-   Eina_Bool   unknow : 1;
-};
-
-struct _Eet_Variant_Test
-{
-   Eet_Variant_Type t;
-
-   void            *data;
-   Eina_List       *data_list;
-};
-
-struct _Eet_Inherit_Test1
-{
-   Eet_Union type;
-   Eet_St1   st1;
-};
-struct _Eet_Inherit_Test2
-{
-   Eet_Union type;
-   Eet_St2   st2;
-};
-struct _Eet_Inherit_Test3
-{
-   Eet_Union type;
-   Eet_St3   st3;
-};
-
-struct _Eet_List
-{
-   Eina_List *list;
-};
-
-static const char *
-_eet_union_type_get(const void *data,
-                    Eina_Bool  *unknow)
-{
-   const Eet_Union *u = data;
-   int i;
-
-   if (unknow)
-     *unknow = EINA_FALSE;
-
-   for (i = 0; eet_mapping[i].name != NULL; ++i)
-     if (*u == eet_mapping[i].u)
-       return eet_mapping[i].name;
-
-   if (unknow)
-     *unknow = EINA_TRUE;
-
-   return NULL;
-} /* _eet_union_type_get */
-
-static Eina_Bool
-_eet_union_type_set(const char *type,
-                    void       *data,
-                    Eina_Bool   unknow)
-{
-   Eet_Union *u = data;
-   int i;
-
-   if (unknow)
-     return EINA_FALSE;
-
-   for (i = 0; eet_mapping[i].name != NULL; ++i)
-     if (strcmp(eet_mapping[i].name, type) == 0)
-       {
-          *u = eet_mapping[i].u;
-          return EINA_TRUE;
-       }
-
-   return EINA_FALSE;
-} /* _eet_union_type_set */
-
-static const char *
-_eet_variant_type_get(const void *data,
-                      Eina_Bool  *unknow)
-{
-   const Eet_Variant_Type *type = data;
-   int i;
-
-   if (unknow)
-     *unknow = type->unknow;
-
-   for (i = 0; eet_mapping[i].name != NULL; ++i)
-     if (strcmp(type->type, eet_mapping[i].name) == 0)
-       return eet_mapping[i].name;
-
-   if (unknow)
-     *unknow = EINA_FALSE;
-
-   return type->type;
-} /* _eet_variant_type_get */
-
-static Eina_Bool
-_eet_variant_type_set(const char *type,
-                      void       *data,
-                      Eina_Bool   unknow)
-{
-   Eet_Variant_Type *vt = data;
-
-   vt->type = type;
-   vt->unknow = unknow;
-   return EINA_TRUE;
-} /* _eet_variant_type_set */
-
-static Eet_Data_Descriptor *
-_eet_st1_dd(void)
-{
-   Eet_Data_Descriptor_Class eddc;
-   Eet_Data_Descriptor *res;
-
-   EET_EINA_STREAM_DATA_DESCRIPTOR_CLASS_SET(&eddc, Eet_St1);
-   res = eet_data_descriptor_stream_new(&eddc);
-   EET_DATA_DESCRIPTOR_ADD_BASIC(res, Eet_St1, "val1", val1, EET_T_DOUBLE);
-   EET_DATA_DESCRIPTOR_ADD_BASIC(res, Eet_St1, "stuff", stuff, EET_T_INT);
-   EET_DATA_DESCRIPTOR_ADD_BASIC(res, Eet_St1, "s1", s1, EET_T_STRING);
-
-   return res;
-} /* _eet_st1_dd */
-
-static void
-_eet_st1_set(Eet_St1 *st1,
-             int      i)
-{
-   st1->val1 = EET_TEST_DOUBLE;
-   st1->stuff = EET_TEST_INT + i;
-   st1->s1 = EET_TEST_STRING;
-} /* _eet_st1_set */
-
-static void
-_eet_st1_cmp(Eet_St1 *st1,
-             int      i)
-{
-   double tmp;
-
-   fail_if(!st1);
-
-   tmp = st1->val1 - EET_TEST_DOUBLE;
-   if (tmp < 0)
-     tmp = -tmp;
-
-   fail_if(tmp > 0.005);
-   fail_if(st1->stuff != EET_TEST_INT + i);
-   fail_if(strcmp(st1->s1, EET_TEST_STRING));
-} /* _eet_st1_cmp */
-
-static Eet_Data_Descriptor *
-_eet_st2_dd(void)
-{
-   Eet_Data_Descriptor_Class eddc;
-   Eet_Data_Descriptor *res;
-
-   EET_EINA_STREAM_DATA_DESCRIPTOR_CLASS_SET(&eddc, Eet_St2);
-   res = eet_data_descriptor_stream_new(&eddc);
-   EET_DATA_DESCRIPTOR_ADD_BASIC(res, Eet_St2, "b1", b1, EET_T_UCHAR);
-   EET_DATA_DESCRIPTOR_ADD_BASIC(res, Eet_St2, "v1", v1, EET_T_ULONG_LONG);
-
-   return res;
-} /* _eet_st2_dd */
-
-static void
-_eet_st2_set(Eet_St2 *st2,
-             int      i)
-{
-   st2->b1 = EINA_TRUE;
-   st2->v1 = EET_TEST_LONG_LONG + i;
-} /* _eet_st2_set */
-
-static void
-_eet_st2_cmp(Eet_St2 *st2,
-             int      i)
-{
-   fail_if(!st2->b1);
-   fail_if(st2->v1 != EET_TEST_LONG_LONG + i);
-} /* _eet_st2_cmp */
-
-static Eet_Data_Descriptor *
-_eet_st3_dd(void)
-{
-   Eet_Data_Descriptor_Class eddc;
-   Eet_Data_Descriptor *res;
-
-   EET_EINA_STREAM_DATA_DESCRIPTOR_CLASS_SET(&eddc, Eet_St3);
-   res = eet_data_descriptor_stream_new(&eddc);
-   EET_DATA_DESCRIPTOR_ADD_BASIC(res, Eet_St3, "boby", boby, EET_T_INT);
-
-   return res;
-} /* _eet_st3_dd */
-
-static void
-_eet_st3_set(Eet_St3 *st3,
-             int      i)
-{
-   st3->boby = EET_TEST_INT + i;
-} /* _eet_st3_set */
-
-static void
-_eet_st3_cmp(Eet_St3 *st3,
-             int      i)
-{
-   fail_if(st3->boby != EET_TEST_INT + i);
-} /* _eet_st3_cmp */
-
-START_TEST(eet_test_union)
-{
-   Eet_Union_Test *eut;
-   Eet_List *l;
-   Eet_Data_Descriptor_Class eddc;
-   Eet_Data_Descriptor *edd;
-   Eet_Data_Descriptor *unified;
-   Eet_Data_Descriptor *m;
-   void *blob;
-   int size;
-   int i;
-
-   eina_init();
-   eet_init();
-
-   EET_EINA_STREAM_DATA_DESCRIPTOR_CLASS_SET(&eddc, Eet_Union_Test);
-   edd = eet_data_descriptor_stream_new(&eddc);
-
-   EET_EINA_STREAM_DATA_DESCRIPTOR_CLASS_SET(&eddc, Eet_Union_Test);
-   m = eet_data_descriptor_stream_new(&eddc);
-
-   eddc.version = EET_DATA_DESCRIPTOR_CLASS_VERSION;
-   eddc.func.type_get = _eet_union_type_get;
-   eddc.func.type_set = _eet_union_type_set;
-   unified = eet_data_descriptor_stream_new(&eddc);
-
-   EET_DATA_DESCRIPTOR_ADD_MAPPING(unified, "ST1", _eet_st1_dd());
-   EET_DATA_DESCRIPTOR_ADD_MAPPING(unified, "ST2", _eet_st2_dd());
-   EET_DATA_DESCRIPTOR_ADD_MAPPING(unified, "ST3", _eet_st3_dd());
-
-   EET_DATA_DESCRIPTOR_ADD_UNION(edd, Eet_Union_Test, "u", u, type, unified);
-
-   EET_DATA_DESCRIPTOR_ADD_LIST(m, Eet_List, "list", list, edd);
-
-   l = calloc(1, sizeof (Eet_List));
-
-#define EUT_NEW(Type_Index)                 \
-  eut = calloc(1, sizeof (Eet_Union_Test)); \
-  eut->type = EET_ST ## Type_Index;         \
-  _eet_st ## Type_Index ## _set(&(eut->u.st ## Type_Index), i);
-
-   for (i = 0; i < 3; ++i)
-     {
-        EUT_NEW(1);
-        l->list = eina_list_append(l->list, eut);
-
-        EUT_NEW(2);
-        l->list = eina_list_append(l->list, eut);
-
-        EUT_NEW(3);
-        l->list = eina_list_append(l->list, eut);
-     }
-
-   blob = eet_data_descriptor_encode(m, l, &size);
-   fail_if(!blob || size <= 0);
-
-   l = eet_data_descriptor_decode(m, blob, size);
-   fail_if(!l);
-
-   fail_if(eina_list_count(l->list) != 9);
-
-#define EUT_CMP(Type_Index)                             \
-  eut = eina_list_nth(l->list, i * 3 + Type_Index - 1); \
-  fail_if(eut->type != EET_ST ## Type_Index);           \
-  _eet_st ## Type_Index ## _cmp(&(eut->u.st ## Type_Index), i);
-
-   for (i = 0; i < 3; ++i)
-     {
-        EUT_CMP(1);
-        EUT_CMP(2);
-        EUT_CMP(3);
-     }
-
-   eet_shutdown();
-   eina_shutdown();
-}
-END_TEST
-START_TEST(eet_test_variant)
-{
-   Eet_Variant_Test *evt;
-   Eet_List *l;
-   Eet_St1 *st1;
-   Eet_St2 *st2;
-   Eet_St3 *st3;
-   Eet_Data_Descriptor_Class eddc;
-   Eet_Data_Descriptor *edd;
-   Eet_Data_Descriptor *unified;
-   Eet_Data_Descriptor *m;
-   void *blob;
-   int size;
-   int i;
-
-   eina_init();
-   eet_init();
-
-   EET_EINA_STREAM_DATA_DESCRIPTOR_CLASS_SET(&eddc, Eet_Variant_Test);
-   edd = eet_data_descriptor_stream_new(&eddc);
-
-   EET_EINA_STREAM_DATA_DESCRIPTOR_CLASS_SET(&eddc, Eet_Variant_Test);
-   m = eet_data_descriptor_stream_new(&eddc);
-
-   eddc.version = EET_DATA_DESCRIPTOR_CLASS_VERSION;
-   eddc.func.type_get = _eet_variant_type_get;
-   eddc.func.type_set = _eet_variant_type_set;
-   unified = eet_data_descriptor_stream_new(&eddc);
-
-   EET_DATA_DESCRIPTOR_ADD_MAPPING(unified, "ST1", _eet_st1_dd());
-   EET_DATA_DESCRIPTOR_ADD_MAPPING(unified, "ST2", _eet_st2_dd());
-   EET_DATA_DESCRIPTOR_ADD_MAPPING(unified, "ST3", _eet_st3_dd());
-
-   EET_DATA_DESCRIPTOR_ADD_VARIANT(edd,
-                                   Eet_Variant_Test,
-                                   "data",
-                                   data,
-                                   t,
-                                   unified);
-
-   unified = eet_data_descriptor_stream_new(&eddc);
-   eet_data_descriptor_element_add(unified, "ST1",
-                                   EET_T_UNKNOW, EET_G_LIST,
-                                   0, 0, NULL, _eet_st1_dd());
-   eet_data_descriptor_element_add(unified, "ST2",
-                                   EET_T_UNKNOW, EET_G_LIST,
-                                   0, 0, NULL, _eet_st2_dd());
-
-   EET_DATA_DESCRIPTOR_ADD_VARIANT(edd, Eet_Variant_Test,
-                                   "data_list", data_list, t, unified);
-
-   EET_DATA_DESCRIPTOR_ADD_LIST(m, Eet_List, "list", list, edd);
-
-   l = calloc(1, sizeof (Eet_List));
-
-#define EVT_NEW(Type_Index)                                    \
-  evt = calloc(1, sizeof (Eet_Variant_Test));                  \
-  evt->t.type = eet_mapping[Type_Index - 1].name;              \
-  st ## Type_Index = calloc(1, sizeof (Eet_St ## Type_Index)); \
-  _eet_st ## Type_Index ## _set(st ## Type_Index, i);          \
-  evt->data = st ## Type_Index;
-
-   for (i = 0; i < 3; ++i)
-     {
-        EVT_NEW(1);
-        l->list = eina_list_append(l->list, evt);
-
-        st1 = calloc(1, sizeof (Eet_St1));
-        _eet_st1_set(st1, i);
-        evt->data_list = eina_list_append(evt->data_list, st1);
-
-        EVT_NEW(2);
-        l->list = eina_list_append(l->list, evt);
-
-        EVT_NEW(3);
-        l->list = eina_list_append(l->list, evt);
-     }
-
-   blob = eet_data_descriptor_encode(m, l, &size);
-   fail_if(!blob || size <= 0);
-
-   l = eet_data_descriptor_decode(m, blob, size);
-   fail_if(!l);
-
-   fail_if(eina_list_count(l->list) != 9);
-
-#define EVT_CMP(Type_Index)                                            \
-  evt = eina_list_nth(l->list, i * 3 + Type_Index - 1);                \
-  fail_if(strcmp(evt->t.type, eet_mapping[Type_Index - 1].name) != 0); \
-  _eet_st ## Type_Index ## _cmp(evt->data, i);
-
-   for (i = 0; i < 3; ++i)
-     {
-        EVT_CMP(1);
-
-        fail_if(!evt->data_list);
-        fail_if(eina_list_count(evt->data_list) != 1);
-
-        st1 = eina_list_data_get(evt->data_list);
-        _eet_st1_cmp(st1, i);
-
-        EVT_CMP(2);
-        EVT_CMP(3);
-     }
-
-   eet_shutdown();
-   eina_shutdown();
-} /* START_TEST */
-
-END_TEST
-
-Suite *
-eet_suite(void)
-{
-   Suite *s;
-   TCase *tc;
-
-   s = suite_create("Eet");
-
-   tc = tcase_create("Eet_Init");
-   tcase_add_test(tc, eet_test_init);
-   suite_add_tcase(s, tc);
-
-   tc = tcase_create("Eet Data Encoding/Decoding");
-   tcase_add_test(tc, eet_test_basic_data_type_encoding_decoding);
-   tcase_add_test(tc, eet_test_data_type_encoding_decoding);
-   tcase_add_test(tc, eet_test_data_type_dump_undump);
-   tcase_add_test(tc, eet_fp);
-   tcase_add_test(tc, eet_test_union);
-   tcase_add_test(tc, eet_test_variant);
-   suite_add_tcase(s, tc);
-
-   tc = tcase_create("Eet File");
-   tcase_add_test(tc, eet_file_simple_write);
-   tcase_add_test(tc, eet_file_data_test);
-   tcase_add_test(tc, eet_file_data_dump_test);
-   tcase_add_test(tc, eet_file_fp);
-   suite_add_tcase(s, tc);
-
-   tc = tcase_create("Eet Image");
-   tcase_add_test(tc, eet_image);
-   tcase_add_test(tc, eet_small_image);
-   suite_add_tcase(s, tc);
-
-#ifdef HAVE_SIGNATURE
-   tc = tcase_create("Eet Identity");
-   tcase_add_test(tc, eet_identity_simple);
-   tcase_add_test(tc, eet_identity_open_simple);
-   tcase_add_test(tc, eet_identity_open_pkcs8);
-   tcase_add_test(tc, eet_identity_open_pkcs8_enc);
-   suite_add_tcase(s, tc);
-#endif /* ifdef HAVE_SIGNATURE */
-
-#ifdef HAVE_CIPHER
-   tc = tcase_create("Eet Cipher");
-   tcase_add_test(tc, eet_cipher_decipher_simple);
-   suite_add_tcase(s, tc);
-#endif /* ifdef HAVE_CIPHER */
-
-#ifdef EINA_HAVE_THREADS
-   tc = tcase_create("Eet Cache");
-   tcase_add_test(tc, eet_cache_concurrency);
-   suite_add_tcase(s, tc);
-#endif /* ifdef EFL_HAVE_THREADS */
-
-   tc = tcase_create("Eet Connection");
-   tcase_add_test(tc, eet_connection_check);
-   suite_add_tcase(s, tc);
-
-   return s;
-} /* eet_suite */
-
-int
-main(void)
-{
-   Suite *s;
-   SRunner *sr;
-   int failed_count;
-
-   s = eet_suite();
-   sr = srunner_create(s);
-   srunner_run_all(sr, CK_ENV);
-   failed_count = srunner_ntests_failed(sr);
-   srunner_free(sr);
-
-   return (failed_count == 0) ? EXIT_SUCCESS : EXIT_FAILURE;
-} /* main */
-
diff --git a/libraries/eet/src/tests/eet_suite.h b/libraries/eet/src/tests/eet_suite.h
deleted file mode 100644
index c5c91aa..0000000
--- a/libraries/eet/src/tests/eet_suite.h
+++ /dev/null
@@ -1,9 +0,0 @@
-#ifndef _EET_SUITE_H
-# define _EET_SUITE_H
-
-#include "Eet.h"
-
-void
-eet_test_setup_eddc(Eet_Data_Descriptor_Class *eddc);
-
-#endif /* _EET_SUITE_H */
diff --git a/libraries/eet/src/tests/key.pem b/libraries/eet/src/tests/key.pem
deleted file mode 100644
index 74763ca..0000000
--- a/libraries/eet/src/tests/key.pem
+++ /dev/null
@@ -1,15 +0,0 @@
------BEGIN RSA PRIVATE KEY-----
-MIICXAIBAAKBgQDIhOPOnkTinjxtP+t/Q+F00w0fV0kVqdcamc6uz/o41kRW2fzF
-lSFc5HODEZvN1DqJWz4++i4zNdHLHmlQISuxvQh6dnbq+GpVr3Qlzx+UPizzhUvY
-DMdCc/RGXhxzh2Si8iXSkpqLfs5bsCUy3tPNUUVMMzSnLeia1VRv+0piEwIDAQAB
-AoGAfLLHyNJ8HEIzae16UmawaqplWrw5YxOABbbo5aXJAledoDVoEKexW8dmXngw
-4Eu/K3RmvVtwJ8CsexiqfX5jYMU+YKRbww6Vqr/punIUhiEHVarHMFKG9yo14qSa
-z2xPgXvC5p7/Rhci+rAUp36S5kIHch5sLhEEcJayymyzDyECQQD/5B3JdpcovrSI
-+nyZ8Iub2+I3f3uox6m1DKxHead26ICoIr7VCnPV5J1gLIB2MofVCbKhmy4PNi5a
-0QdvazJfAkEAyJq9Y+9SQ4sCOVDrFklJxhXuZE4WbnR32XsBdnQ9dauo0E2vDVkv
-6mHnzMWroTjLv4hH5nufE5NvMo8PNGB0zQJAFOKkf737JmsyRv/Szamxa14t/4Ob
-LzJkqo9HPGo0feMKJS74zmCVBb8sDR50ubD0HzI0bzZAMyOj8uuepLxmFwJAH+RR
-5bhfeLN52AjgRvvBycckzjeH42mKwD2I/v794l43CV7ATLv4HSgRhQGMBqaT5dBR
-tffDU4Zl8EDEJwyKpQJBAJ2NNacURTyavU699QJOIdGAsA4KXici8H3PuuWMtHLR
-RKdPFeaCRn+9p7Tglf0rH9hUGOpUXHYD3+ECt6gnVDc=
------END RSA PRIVATE KEY-----
diff --git a/libraries/eet/src/tests/key_enc.pem b/libraries/eet/src/tests/key_enc.pem
deleted file mode 100644
index 83c1ba2..0000000
--- a/libraries/eet/src/tests/key_enc.pem
+++ /dev/null
@@ -1,17 +0,0 @@
------BEGIN ENCRYPTED PRIVATE KEY-----
-MIICxjBABgkqhkiG9w0BBQ0wMzAbBgkqhkiG9w0BBQwwDgQILLqDZE1i0Y8CAggA
-MBQGCCqGSIb3DQMHBAjwbnSdTCCDOASCAoB0rMuSIXrzqFQnCexMkC9A5jyd+HvC
-2UV6EWIfFU4yBvp+2dfHg6RKUoZ0wGk8FxAkaAj+boVwf16PPXXQ70AQBb0iGeb4
-YLdjDF2zSoIK3SbsWrhAfJhSMbcMftEZnLTYxLSkTv5R8jb0IPybVNTqFf+KmGav
-DwyRVQrdAxIYdJSPwd61Fhs1VqzptmQ8DLKHy35X1fIro3py4jncBhsuqf6H3yj1
-ZFuzCPnwB8unASgbTPD43yObrjyWTjbTtp59WavVdnNS+m7QNW+OfxznHUUJXtMz
-/EniglUhR1Uf75wpMpQIPfC77Cary0Y4iLGQZiF1C0WjQzMBufckJFJVRFGfkkMl
-ijlaijLUYMqENJ6wsyK5lihsoBCzIDoqI375s9pdeln8sd33Yu+L/Gu4Xo8Bh5cM
-6mlo9WUgw5KibmlZHGEAGdKxcvL0ywswuwQ6yhwcdvCAt6MfrWJNpksa9JmpXJi8
-c21lHwnoyG1DgSqY5VhRyitfnuY3Jegj+7njhooiAJM9w7fxpafN9oxiaJBvPFqd
-lfJ42Pj5rkjjVqXOJX7Cf7sF85tW7ygwdGWyXvHn2fhQ+vjaDtZalry//Xytet4r
-lvTerO6M6WVMk2yM7vdeBU7c74LVIJmwGR6d837OPax1V+Z9yq6zDuJAQ3l9mtmu
-gowV3xInTFRsnSOQcYW5y8dNnugR9FBh8f1NI7SPyW0reeVbPXXhRxg+TyogIXhh
-yAfWJ6dDLZ31EVCdqRKxK7b9u2r3dsuaiwT1jFg59Eu2AifFi0j7aDA1lGIKoj3C
-cPDwJd8weC+UoWpWX/O4KOpaU62Rwt5wRoOxELG6lHy7cOjZgLmwjg1G
------END ENCRYPTED PRIVATE KEY-----
diff --git a/libraries/eet/src/tests/key_enc_none.pem b/libraries/eet/src/tests/key_enc_none.pem
deleted file mode 100644
index 1163851..0000000
--- a/libraries/eet/src/tests/key_enc_none.pem
+++ /dev/null
@@ -1,16 +0,0 @@
------BEGIN PRIVATE KEY-----
-MIICdgIBADANBgkqhkiG9w0BAQEFAASCAmAwggJcAgEAAoGBAMiE486eROKePG0/
-639D4XTTDR9XSRWp1xqZzq7P+jjWRFbZ/MWVIVzkc4MRm83UOolbPj76LjM10cse
-aVAhK7G9CHp2dur4alWvdCXPH5Q+LPOFS9gMx0Jz9EZeHHOHZKLyJdKSmot+zluw
-JTLe081RRUwzNKct6JrVVG/7SmITAgMBAAECgYB8ssfI0nwcQjNp7XpSZrBqqmVa
-vDljE4AFtujlpckCV52gNWgQp7Fbx2ZeeDDgS78rdGa9W3AnwKx7GKp9fmNgxT5g
-pFvDDpWqv+m6chSGIQdVqscwUob3KjXipJrPbE+Be8Lmnv9GFyL6sBSnfpLmQgdy
-HmwuEQRwlrLKbLMPIQJBAP/kHcl2lyi+tIj6fJnwi5vb4jd/e6jHqbUMrEd5p3bo
-gKgivtUKc9XknWAsgHYyh9UJsqGbLg82LlrRB29rMl8CQQDImr1j71JDiwI5UOsW
-SUnGFe5kThZudHfZewF2dD11q6jQTa8NWS/qYefMxauhOMu/iEfme58Tk28yjw80
-YHTNAkAU4qR/vfsmazJG/9LNqbFrXi3/g5svMmSqj0c8ajR94wolLvjOYJUFvywN
-HnS5sPQfMjRvNkAzI6Py656kvGYXAkAf5FHluF94s3nYCOBG+8HJxyTON4fjaYrA
-PYj+/v3iXjcJXsBMu/gdKBGFAYwGppPl0FG198NThmXwQMQnDIqlAkEAnY01pxRF
-PJq9Tr31Ak4h0YCwDgpeJyLwfc+65Yy0ctFEp08V5oJGf72ntOCV/Ssf2FQY6lRc
-dgPf4QK3qCdUNw==
------END PRIVATE KEY-----