aboutsummaryrefslogtreecommitdiffstatshomepage
path: root/libraries/irrlicht-1.8/source/Irrlicht/zlib/zlib.h
diff options
context:
space:
mode:
authorDavid Walter Seikel2013-01-13 18:54:10 +1000
committerDavid Walter Seikel2013-01-13 18:54:10 +1000
commit959831f4ef5a3e797f576c3de08cd65032c997ad (patch)
treee7351908be5995f0b325b2ebeaa02d5a34b82583 /libraries/irrlicht-1.8/source/Irrlicht/zlib/zlib.h
parentAdd info about changes to Irrlicht. (diff)
downloadSledjHamr-959831f4ef5a3e797f576c3de08cd65032c997ad.zip
SledjHamr-959831f4ef5a3e797f576c3de08cd65032c997ad.tar.gz
SledjHamr-959831f4ef5a3e797f576c3de08cd65032c997ad.tar.bz2
SledjHamr-959831f4ef5a3e797f576c3de08cd65032c997ad.tar.xz
Remove damned ancient DOS line endings from Irrlicht. Hopefully I did not go overboard.
Diffstat (limited to '')
-rw-r--r--libraries/irrlicht-1.8/source/Irrlicht/zlib/zlib.h3488
1 files changed, 1744 insertions, 1744 deletions
diff --git a/libraries/irrlicht-1.8/source/Irrlicht/zlib/zlib.h b/libraries/irrlicht-1.8/source/Irrlicht/zlib/zlib.h
index 4112d91..be12096 100644
--- a/libraries/irrlicht-1.8/source/Irrlicht/zlib/zlib.h
+++ b/libraries/irrlicht-1.8/source/Irrlicht/zlib/zlib.h
@@ -1,1744 +1,1744 @@
1/* zlib.h -- interface of the 'zlib' general purpose compression library 1/* zlib.h -- interface of the 'zlib' general purpose compression library
2 version 1.2.7, May 2nd, 2012 2 version 1.2.7, May 2nd, 2012
3 3
4 Copyright (C) 1995-2012 Jean-loup Gailly and Mark Adler 4 Copyright (C) 1995-2012 Jean-loup Gailly and Mark Adler
5 5
6 This software is provided 'as-is', without any express or implied 6 This software is provided 'as-is', without any express or implied
7 warranty. In no event will the authors be held liable for any damages 7 warranty. In no event will the authors be held liable for any damages
8 arising from the use of this software. 8 arising from the use of this software.
9 9
10 Permission is granted to anyone to use this software for any purpose, 10 Permission is granted to anyone to use this software for any purpose,
11 including commercial applications, and to alter it and redistribute it 11 including commercial applications, and to alter it and redistribute it
12 freely, subject to the following restrictions: 12 freely, subject to the following restrictions:
13 13
14 1. The origin of this software must not be misrepresented; you must not 14 1. The origin of this software must not be misrepresented; you must not
15 claim that you wrote the original software. If you use this software 15 claim that you wrote the original software. If you use this software
16 in a product, an acknowledgment in the product documentation would be 16 in a product, an acknowledgment in the product documentation would be
17 appreciated but is not required. 17 appreciated but is not required.
18 2. Altered source versions must be plainly marked as such, and must not be 18 2. Altered source versions must be plainly marked as such, and must not be
19 misrepresented as being the original software. 19 misrepresented as being the original software.
20 3. This notice may not be removed or altered from any source distribution. 20 3. This notice may not be removed or altered from any source distribution.
21 21
22 Jean-loup Gailly Mark Adler 22 Jean-loup Gailly Mark Adler
23 jloup@gzip.org madler@alumni.caltech.edu 23 jloup@gzip.org madler@alumni.caltech.edu
24 24
25 25
26 The data format used by the zlib library is described by RFCs (Request for 26 The data format used by the zlib library is described by RFCs (Request for
27 Comments) 1950 to 1952 in the files http://tools.ietf.org/html/rfc1950 27 Comments) 1950 to 1952 in the files http://tools.ietf.org/html/rfc1950
28 (zlib format), rfc1951 (deflate format) and rfc1952 (gzip format). 28 (zlib format), rfc1951 (deflate format) and rfc1952 (gzip format).
29*/ 29*/
30 30
31#ifndef ZLIB_H 31#ifndef ZLIB_H
32#define ZLIB_H 32#define ZLIB_H
33 33
34#include "zconf.h" 34#include "zconf.h"
35 35
36#ifdef __cplusplus 36#ifdef __cplusplus
37extern "C" { 37extern "C" {
38#endif 38#endif
39 39
40#define ZLIB_VERSION "1.2.7" 40#define ZLIB_VERSION "1.2.7"
41#define ZLIB_VERNUM 0x1270 41#define ZLIB_VERNUM 0x1270
42#define ZLIB_VER_MAJOR 1 42#define ZLIB_VER_MAJOR 1
43#define ZLIB_VER_MINOR 2 43#define ZLIB_VER_MINOR 2
44#define ZLIB_VER_REVISION 7 44#define ZLIB_VER_REVISION 7
45#define ZLIB_VER_SUBREVISION 0 45#define ZLIB_VER_SUBREVISION 0
46 46
47/* 47/*
48 The 'zlib' compression library provides in-memory compression and 48 The 'zlib' compression library provides in-memory compression and
49 decompression functions, including integrity checks of the uncompressed data. 49 decompression functions, including integrity checks of the uncompressed data.
50 This version of the library supports only one compression method (deflation) 50 This version of the library supports only one compression method (deflation)
51 but other algorithms will be added later and will have the same stream 51 but other algorithms will be added later and will have the same stream
52 interface. 52 interface.
53 53
54 Compression can be done in a single step if the buffers are large enough, 54 Compression can be done in a single step if the buffers are large enough,
55 or can be done by repeated calls of the compression function. In the latter 55 or can be done by repeated calls of the compression function. In the latter
56 case, the application must provide more input and/or consume the output 56 case, the application must provide more input and/or consume the output
57 (providing more output space) before each call. 57 (providing more output space) before each call.
58 58
59 The compressed data format used by default by the in-memory functions is 59 The compressed data format used by default by the in-memory functions is
60 the zlib format, which is a zlib wrapper documented in RFC 1950, wrapped 60 the zlib format, which is a zlib wrapper documented in RFC 1950, wrapped
61 around a deflate stream, which is itself documented in RFC 1951. 61 around a deflate stream, which is itself documented in RFC 1951.
62 62
63 The library also supports reading and writing files in gzip (.gz) format 63 The library also supports reading and writing files in gzip (.gz) format
64 with an interface similar to that of stdio using the functions that start 64 with an interface similar to that of stdio using the functions that start
65 with "gz". The gzip format is different from the zlib format. gzip is a 65 with "gz". The gzip format is different from the zlib format. gzip is a
66 gzip wrapper, documented in RFC 1952, wrapped around a deflate stream. 66 gzip wrapper, documented in RFC 1952, wrapped around a deflate stream.
67 67
68 This library can optionally read and write gzip streams in memory as well. 68 This library can optionally read and write gzip streams in memory as well.
69 69
70 The zlib format was designed to be compact and fast for use in memory 70 The zlib format was designed to be compact and fast for use in memory
71 and on communications channels. The gzip format was designed for single- 71 and on communications channels. The gzip format was designed for single-
72 file compression on file systems, has a larger header than zlib to maintain 72 file compression on file systems, has a larger header than zlib to maintain
73 directory information, and uses a different, slower check method than zlib. 73 directory information, and uses a different, slower check method than zlib.
74 74
75 The library does not install any signal handler. The decoder checks 75 The library does not install any signal handler. The decoder checks
76 the consistency of the compressed data, so the library should never crash 76 the consistency of the compressed data, so the library should never crash
77 even in case of corrupted input. 77 even in case of corrupted input.
78*/ 78*/
79 79
80typedef voidpf (*alloc_func) OF((voidpf opaque, uInt items, uInt size)); 80typedef voidpf (*alloc_func) OF((voidpf opaque, uInt items, uInt size));
81typedef void (*free_func) OF((voidpf opaque, voidpf address)); 81typedef void (*free_func) OF((voidpf opaque, voidpf address));
82 82
83struct internal_state; 83struct internal_state;
84 84
85typedef struct z_stream_s { 85typedef struct z_stream_s {
86 z_const Bytef *next_in; /* next input byte */ 86 z_const Bytef *next_in; /* next input byte */
87 uInt avail_in; /* number of bytes available at next_in */ 87 uInt avail_in; /* number of bytes available at next_in */
88 uLong total_in; /* total number of input bytes read so far */ 88 uLong total_in; /* total number of input bytes read so far */
89 89
90 Bytef *next_out; /* next output byte should be put there */ 90 Bytef *next_out; /* next output byte should be put there */
91 uInt avail_out; /* remaining free space at next_out */ 91 uInt avail_out; /* remaining free space at next_out */
92 uLong total_out; /* total number of bytes output so far */ 92 uLong total_out; /* total number of bytes output so far */
93 93
94 z_const char *msg; /* last error message, NULL if no error */ 94 z_const char *msg; /* last error message, NULL if no error */
95 struct internal_state FAR *state; /* not visible by applications */ 95 struct internal_state FAR *state; /* not visible by applications */
96 96
97 alloc_func zalloc; /* used to allocate the internal state */ 97 alloc_func zalloc; /* used to allocate the internal state */
98 free_func zfree; /* used to free the internal state */ 98 free_func zfree; /* used to free the internal state */
99 voidpf opaque; /* private data object passed to zalloc and zfree */ 99 voidpf opaque; /* private data object passed to zalloc and zfree */
100 100
101 int data_type; /* best guess about the data type: binary or text */ 101 int data_type; /* best guess about the data type: binary or text */
102 uLong adler; /* adler32 value of the uncompressed data */ 102 uLong adler; /* adler32 value of the uncompressed data */
103 uLong reserved; /* reserved for future use */ 103 uLong reserved; /* reserved for future use */
104} z_stream; 104} z_stream;
105 105
106typedef z_stream FAR *z_streamp; 106typedef z_stream FAR *z_streamp;
107 107
108/* 108/*
109 gzip header information passed to and from zlib routines. See RFC 1952 109 gzip header information passed to and from zlib routines. See RFC 1952
110 for more details on the meanings of these fields. 110 for more details on the meanings of these fields.
111*/ 111*/
112typedef struct gz_header_s { 112typedef struct gz_header_s {
113 int text; /* true if compressed data believed to be text */ 113 int text; /* true if compressed data believed to be text */
114 uLong time; /* modification time */ 114 uLong time; /* modification time */
115 int xflags; /* extra flags (not used when writing a gzip file) */ 115 int xflags; /* extra flags (not used when writing a gzip file) */
116 int os; /* operating system */ 116 int os; /* operating system */
117 Bytef *extra; /* pointer to extra field or Z_NULL if none */ 117 Bytef *extra; /* pointer to extra field or Z_NULL if none */
118 uInt extra_len; /* extra field length (valid if extra != Z_NULL) */ 118 uInt extra_len; /* extra field length (valid if extra != Z_NULL) */
119 uInt extra_max; /* space at extra (only when reading header) */ 119 uInt extra_max; /* space at extra (only when reading header) */
120 Bytef *name; /* pointer to zero-terminated file name or Z_NULL */ 120 Bytef *name; /* pointer to zero-terminated file name or Z_NULL */
121 uInt name_max; /* space at name (only when reading header) */ 121 uInt name_max; /* space at name (only when reading header) */
122 Bytef *comment; /* pointer to zero-terminated comment or Z_NULL */ 122 Bytef *comment; /* pointer to zero-terminated comment or Z_NULL */
123 uInt comm_max; /* space at comment (only when reading header) */ 123 uInt comm_max; /* space at comment (only when reading header) */
124 int hcrc; /* true if there was or will be a header crc */ 124 int hcrc; /* true if there was or will be a header crc */
125 int done; /* true when done reading gzip header (not used 125 int done; /* true when done reading gzip header (not used
126 when writing a gzip file) */ 126 when writing a gzip file) */
127} gz_header; 127} gz_header;
128 128
129typedef gz_header FAR *gz_headerp; 129typedef gz_header FAR *gz_headerp;
130 130
131/* 131/*
132 The application must update next_in and avail_in when avail_in has dropped 132 The application must update next_in and avail_in when avail_in has dropped
133 to zero. It must update next_out and avail_out when avail_out has dropped 133 to zero. It must update next_out and avail_out when avail_out has dropped
134 to zero. The application must initialize zalloc, zfree and opaque before 134 to zero. The application must initialize zalloc, zfree and opaque before
135 calling the init function. All other fields are set by the compression 135 calling the init function. All other fields are set by the compression
136 library and must not be updated by the application. 136 library and must not be updated by the application.
137 137
138 The opaque value provided by the application will be passed as the first 138 The opaque value provided by the application will be passed as the first
139 parameter for calls of zalloc and zfree. This can be useful for custom 139 parameter for calls of zalloc and zfree. This can be useful for custom
140 memory management. The compression library attaches no meaning to the 140 memory management. The compression library attaches no meaning to the
141 opaque value. 141 opaque value.
142 142
143 zalloc must return Z_NULL if there is not enough memory for the object. 143 zalloc must return Z_NULL if there is not enough memory for the object.
144 If zlib is used in a multi-threaded application, zalloc and zfree must be 144 If zlib is used in a multi-threaded application, zalloc and zfree must be
145 thread safe. 145 thread safe.
146 146
147 On 16-bit systems, the functions zalloc and zfree must be able to allocate 147 On 16-bit systems, the functions zalloc and zfree must be able to allocate
148 exactly 65536 bytes, but will not be required to allocate more than this if 148 exactly 65536 bytes, but will not be required to allocate more than this if
149 the symbol MAXSEG_64K is defined (see zconf.h). WARNING: On MSDOS, pointers 149 the symbol MAXSEG_64K is defined (see zconf.h). WARNING: On MSDOS, pointers
150 returned by zalloc for objects of exactly 65536 bytes *must* have their 150 returned by zalloc for objects of exactly 65536 bytes *must* have their
151 offset normalized to zero. The default allocation function provided by this 151 offset normalized to zero. The default allocation function provided by this
152 library ensures this (see zutil.c). To reduce memory requirements and avoid 152 library ensures this (see zutil.c). To reduce memory requirements and avoid
153 any allocation of 64K objects, at the expense of compression ratio, compile 153 any allocation of 64K objects, at the expense of compression ratio, compile
154 the library with -DMAX_WBITS=14 (see zconf.h). 154 the library with -DMAX_WBITS=14 (see zconf.h).
155 155
156 The fields total_in and total_out can be used for statistics or progress 156 The fields total_in and total_out can be used for statistics or progress
157 reports. After compression, total_in holds the total size of the 157 reports. After compression, total_in holds the total size of the
158 uncompressed data and may be saved for use in the decompressor (particularly 158 uncompressed data and may be saved for use in the decompressor (particularly
159 if the decompressor wants to decompress everything in a single step). 159 if the decompressor wants to decompress everything in a single step).
160*/ 160*/
161 161
162 /* constants */ 162 /* constants */
163 163
164#define Z_NO_FLUSH 0 164#define Z_NO_FLUSH 0
165#define Z_PARTIAL_FLUSH 1 165#define Z_PARTIAL_FLUSH 1
166#define Z_SYNC_FLUSH 2 166#define Z_SYNC_FLUSH 2
167#define Z_FULL_FLUSH 3 167#define Z_FULL_FLUSH 3
168#define Z_FINISH 4 168#define Z_FINISH 4
169#define Z_BLOCK 5 169#define Z_BLOCK 5
170#define Z_TREES 6 170#define Z_TREES 6
171/* Allowed flush values; see deflate() and inflate() below for details */ 171/* Allowed flush values; see deflate() and inflate() below for details */
172 172
173#define Z_OK 0 173#define Z_OK 0
174#define Z_STREAM_END 1 174#define Z_STREAM_END 1
175#define Z_NEED_DICT 2 175#define Z_NEED_DICT 2
176#define Z_ERRNO (-1) 176#define Z_ERRNO (-1)
177#define Z_STREAM_ERROR (-2) 177#define Z_STREAM_ERROR (-2)
178#define Z_DATA_ERROR (-3) 178#define Z_DATA_ERROR (-3)
179#define Z_MEM_ERROR (-4) 179#define Z_MEM_ERROR (-4)
180#define Z_BUF_ERROR (-5) 180#define Z_BUF_ERROR (-5)
181#define Z_VERSION_ERROR (-6) 181#define Z_VERSION_ERROR (-6)
182/* Return codes for the compression/decompression functions. Negative values 182/* Return codes for the compression/decompression functions. Negative values
183 * are errors, positive values are used for special but normal events. 183 * are errors, positive values are used for special but normal events.
184 */ 184 */
185 185
186#define Z_NO_COMPRESSION 0 186#define Z_NO_COMPRESSION 0
187#define Z_BEST_SPEED 1 187#define Z_BEST_SPEED 1
188#define Z_BEST_COMPRESSION 9 188#define Z_BEST_COMPRESSION 9
189#define Z_DEFAULT_COMPRESSION (-1) 189#define Z_DEFAULT_COMPRESSION (-1)
190/* compression levels */ 190/* compression levels */
191 191
192#define Z_FILTERED 1 192#define Z_FILTERED 1
193#define Z_HUFFMAN_ONLY 2 193#define Z_HUFFMAN_ONLY 2
194#define Z_RLE 3 194#define Z_RLE 3
195#define Z_FIXED 4 195#define Z_FIXED 4
196#define Z_DEFAULT_STRATEGY 0 196#define Z_DEFAULT_STRATEGY 0
197/* compression strategy; see deflateInit2() below for details */ 197/* compression strategy; see deflateInit2() below for details */
198 198
199#define Z_BINARY 0 199#define Z_BINARY 0
200#define Z_TEXT 1 200#define Z_TEXT 1
201#define Z_ASCII Z_TEXT /* for compatibility with 1.2.2 and earlier */ 201#define Z_ASCII Z_TEXT /* for compatibility with 1.2.2 and earlier */
202#define Z_UNKNOWN 2 202#define Z_UNKNOWN 2
203/* Possible values of the data_type field (though see inflate()) */ 203/* Possible values of the data_type field (though see inflate()) */
204 204
205#define Z_DEFLATED 8 205#define Z_DEFLATED 8
206/* The deflate compression method (the only one supported in this version) */ 206/* The deflate compression method (the only one supported in this version) */
207 207
208#define Z_NULL 0 /* for initializing zalloc, zfree, opaque */ 208#define Z_NULL 0 /* for initializing zalloc, zfree, opaque */
209 209
210#define zlib_version zlibVersion() 210#define zlib_version zlibVersion()
211/* for compatibility with versions < 1.0.2 */ 211/* for compatibility with versions < 1.0.2 */
212 212
213 213
214 /* basic functions */ 214 /* basic functions */
215 215
216ZEXTERN const char * ZEXPORT zlibVersion OF((void)); 216ZEXTERN const char * ZEXPORT zlibVersion OF((void));
217/* The application can compare zlibVersion and ZLIB_VERSION for consistency. 217/* The application can compare zlibVersion and ZLIB_VERSION for consistency.
218 If the first character differs, the library code actually used is not 218 If the first character differs, the library code actually used is not
219 compatible with the zlib.h header file used by the application. This check 219 compatible with the zlib.h header file used by the application. This check
220 is automatically made by deflateInit and inflateInit. 220 is automatically made by deflateInit and inflateInit.
221 */ 221 */
222 222
223/* 223/*
224ZEXTERN int ZEXPORT deflateInit OF((z_streamp strm, int level)); 224ZEXTERN int ZEXPORT deflateInit OF((z_streamp strm, int level));
225 225
226 Initializes the internal stream state for compression. The fields 226 Initializes the internal stream state for compression. The fields
227 zalloc, zfree and opaque must be initialized before by the caller. If 227 zalloc, zfree and opaque must be initialized before by the caller. If
228 zalloc and zfree are set to Z_NULL, deflateInit updates them to use default 228 zalloc and zfree are set to Z_NULL, deflateInit updates them to use default
229 allocation functions. 229 allocation functions.
230 230
231 The compression level must be Z_DEFAULT_COMPRESSION, or between 0 and 9: 231 The compression level must be Z_DEFAULT_COMPRESSION, or between 0 and 9:
232 1 gives best speed, 9 gives best compression, 0 gives no compression at all 232 1 gives best speed, 9 gives best compression, 0 gives no compression at all
233 (the input data is simply copied a block at a time). Z_DEFAULT_COMPRESSION 233 (the input data is simply copied a block at a time). Z_DEFAULT_COMPRESSION
234 requests a default compromise between speed and compression (currently 234 requests a default compromise between speed and compression (currently
235 equivalent to level 6). 235 equivalent to level 6).
236 236
237 deflateInit returns Z_OK if success, Z_MEM_ERROR if there was not enough 237 deflateInit returns Z_OK if success, Z_MEM_ERROR if there was not enough
238 memory, Z_STREAM_ERROR if level is not a valid compression level, or 238 memory, Z_STREAM_ERROR if level is not a valid compression level, or
239 Z_VERSION_ERROR if the zlib library version (zlib_version) is incompatible 239 Z_VERSION_ERROR if the zlib library version (zlib_version) is incompatible
240 with the version assumed by the caller (ZLIB_VERSION). msg is set to null 240 with the version assumed by the caller (ZLIB_VERSION). msg is set to null
241 if there is no error message. deflateInit does not perform any compression: 241 if there is no error message. deflateInit does not perform any compression:
242 this will be done by deflate(). 242 this will be done by deflate().
243*/ 243*/
244 244
245 245
246ZEXTERN int ZEXPORT deflate OF((z_streamp strm, int flush)); 246ZEXTERN int ZEXPORT deflate OF((z_streamp strm, int flush));
247/* 247/*
248 deflate compresses as much data as possible, and stops when the input 248 deflate compresses as much data as possible, and stops when the input
249 buffer becomes empty or the output buffer becomes full. It may introduce 249 buffer becomes empty or the output buffer becomes full. It may introduce
250 some output latency (reading input without producing any output) except when 250 some output latency (reading input without producing any output) except when
251 forced to flush. 251 forced to flush.
252 252
253 The detailed semantics are as follows. deflate performs one or both of the 253 The detailed semantics are as follows. deflate performs one or both of the
254 following actions: 254 following actions:
255 255
256 - Compress more input starting at next_in and update next_in and avail_in 256 - Compress more input starting at next_in and update next_in and avail_in
257 accordingly. If not all input can be processed (because there is not 257 accordingly. If not all input can be processed (because there is not
258 enough room in the output buffer), next_in and avail_in are updated and 258 enough room in the output buffer), next_in and avail_in are updated and
259 processing will resume at this point for the next call of deflate(). 259 processing will resume at this point for the next call of deflate().
260 260
261 - Provide more output starting at next_out and update next_out and avail_out 261 - Provide more output starting at next_out and update next_out and avail_out
262 accordingly. This action is forced if the parameter flush is non zero. 262 accordingly. This action is forced if the parameter flush is non zero.
263 Forcing flush frequently degrades the compression ratio, so this parameter 263 Forcing flush frequently degrades the compression ratio, so this parameter
264 should be set only when necessary (in interactive applications). Some 264 should be set only when necessary (in interactive applications). Some
265 output may be provided even if flush is not set. 265 output may be provided even if flush is not set.
266 266
267 Before the call of deflate(), the application should ensure that at least 267 Before the call of deflate(), the application should ensure that at least
268 one of the actions is possible, by providing more input and/or consuming more 268 one of the actions is possible, by providing more input and/or consuming more
269 output, and updating avail_in or avail_out accordingly; avail_out should 269 output, and updating avail_in or avail_out accordingly; avail_out should
270 never be zero before the call. The application can consume the compressed 270 never be zero before the call. The application can consume the compressed
271 output when it wants, for example when the output buffer is full (avail_out 271 output when it wants, for example when the output buffer is full (avail_out
272 == 0), or after each call of deflate(). If deflate returns Z_OK and with 272 == 0), or after each call of deflate(). If deflate returns Z_OK and with
273 zero avail_out, it must be called again after making room in the output 273 zero avail_out, it must be called again after making room in the output
274 buffer because there might be more output pending. 274 buffer because there might be more output pending.
275 275
276 Normally the parameter flush is set to Z_NO_FLUSH, which allows deflate to 276 Normally the parameter flush is set to Z_NO_FLUSH, which allows deflate to
277 decide how much data to accumulate before producing output, in order to 277 decide how much data to accumulate before producing output, in order to
278 maximize compression. 278 maximize compression.
279 279
280 If the parameter flush is set to Z_SYNC_FLUSH, all pending output is 280 If the parameter flush is set to Z_SYNC_FLUSH, all pending output is
281 flushed to the output buffer and the output is aligned on a byte boundary, so 281 flushed to the output buffer and the output is aligned on a byte boundary, so
282 that the decompressor can get all input data available so far. (In 282 that the decompressor can get all input data available so far. (In
283 particular avail_in is zero after the call if enough output space has been 283 particular avail_in is zero after the call if enough output space has been
284 provided before the call.) Flushing may degrade compression for some 284 provided before the call.) Flushing may degrade compression for some
285 compression algorithms and so it should be used only when necessary. This 285 compression algorithms and so it should be used only when necessary. This
286 completes the current deflate block and follows it with an empty stored block 286 completes the current deflate block and follows it with an empty stored block
287 that is three bits plus filler bits to the next byte, followed by four bytes 287 that is three bits plus filler bits to the next byte, followed by four bytes
288 (00 00 ff ff). 288 (00 00 ff ff).
289 289
290 If flush is set to Z_PARTIAL_FLUSH, all pending output is flushed to the 290 If flush is set to Z_PARTIAL_FLUSH, all pending output is flushed to the
291 output buffer, but the output is not aligned to a byte boundary. All of the 291 output buffer, but the output is not aligned to a byte boundary. All of the
292 input data so far will be available to the decompressor, as for Z_SYNC_FLUSH. 292 input data so far will be available to the decompressor, as for Z_SYNC_FLUSH.
293 This completes the current deflate block and follows it with an empty fixed 293 This completes the current deflate block and follows it with an empty fixed
294 codes block that is 10 bits long. This assures that enough bytes are output 294 codes block that is 10 bits long. This assures that enough bytes are output
295 in order for the decompressor to finish the block before the empty fixed code 295 in order for the decompressor to finish the block before the empty fixed code
296 block. 296 block.
297 297
298 If flush is set to Z_BLOCK, a deflate block is completed and emitted, as 298 If flush is set to Z_BLOCK, a deflate block is completed and emitted, as
299 for Z_SYNC_FLUSH, but the output is not aligned on a byte boundary, and up to 299 for Z_SYNC_FLUSH, but the output is not aligned on a byte boundary, and up to
300 seven bits of the current block are held to be written as the next byte after 300 seven bits of the current block are held to be written as the next byte after
301 the next deflate block is completed. In this case, the decompressor may not 301 the next deflate block is completed. In this case, the decompressor may not
302 be provided enough bits at this point in order to complete decompression of 302 be provided enough bits at this point in order to complete decompression of
303 the data provided so far to the compressor. It may need to wait for the next 303 the data provided so far to the compressor. It may need to wait for the next
304 block to be emitted. This is for advanced applications that need to control 304 block to be emitted. This is for advanced applications that need to control
305 the emission of deflate blocks. 305 the emission of deflate blocks.
306 306
307 If flush is set to Z_FULL_FLUSH, all output is flushed as with 307 If flush is set to Z_FULL_FLUSH, all output is flushed as with
308 Z_SYNC_FLUSH, and the compression state is reset so that decompression can 308 Z_SYNC_FLUSH, and the compression state is reset so that decompression can
309 restart from this point if previous compressed data has been damaged or if 309 restart from this point if previous compressed data has been damaged or if
310 random access is desired. Using Z_FULL_FLUSH too often can seriously degrade 310 random access is desired. Using Z_FULL_FLUSH too often can seriously degrade
311 compression. 311 compression.
312 312
313 If deflate returns with avail_out == 0, this function must be called again 313 If deflate returns with avail_out == 0, this function must be called again
314 with the same value of the flush parameter and more output space (updated 314 with the same value of the flush parameter and more output space (updated
315 avail_out), until the flush is complete (deflate returns with non-zero 315 avail_out), until the flush is complete (deflate returns with non-zero
316 avail_out). In the case of a Z_FULL_FLUSH or Z_SYNC_FLUSH, make sure that 316 avail_out). In the case of a Z_FULL_FLUSH or Z_SYNC_FLUSH, make sure that
317 avail_out is greater than six to avoid repeated flush markers due to 317 avail_out is greater than six to avoid repeated flush markers due to
318 avail_out == 0 on return. 318 avail_out == 0 on return.
319 319
320 If the parameter flush is set to Z_FINISH, pending input is processed, 320 If the parameter flush is set to Z_FINISH, pending input is processed,
321 pending output is flushed and deflate returns with Z_STREAM_END if there was 321 pending output is flushed and deflate returns with Z_STREAM_END if there was
322 enough output space; if deflate returns with Z_OK, this function must be 322 enough output space; if deflate returns with Z_OK, this function must be
323 called again with Z_FINISH and more output space (updated avail_out) but no 323 called again with Z_FINISH and more output space (updated avail_out) but no
324 more input data, until it returns with Z_STREAM_END or an error. After 324 more input data, until it returns with Z_STREAM_END or an error. After
325 deflate has returned Z_STREAM_END, the only possible operations on the stream 325 deflate has returned Z_STREAM_END, the only possible operations on the stream
326 are deflateReset or deflateEnd. 326 are deflateReset or deflateEnd.
327 327
328 Z_FINISH can be used immediately after deflateInit if all the compression 328 Z_FINISH can be used immediately after deflateInit if all the compression
329 is to be done in a single step. In this case, avail_out must be at least the 329 is to be done in a single step. In this case, avail_out must be at least the
330 value returned by deflateBound (see below). Then deflate is guaranteed to 330 value returned by deflateBound (see below). Then deflate is guaranteed to
331 return Z_STREAM_END. If not enough output space is provided, deflate will 331 return Z_STREAM_END. If not enough output space is provided, deflate will
332 not return Z_STREAM_END, and it must be called again as described above. 332 not return Z_STREAM_END, and it must be called again as described above.
333 333
334 deflate() sets strm->adler to the adler32 checksum of all input read 334 deflate() sets strm->adler to the adler32 checksum of all input read
335 so far (that is, total_in bytes). 335 so far (that is, total_in bytes).
336 336
337 deflate() may update strm->data_type if it can make a good guess about 337 deflate() may update strm->data_type if it can make a good guess about
338 the input data type (Z_BINARY or Z_TEXT). In doubt, the data is considered 338 the input data type (Z_BINARY or Z_TEXT). In doubt, the data is considered
339 binary. This field is only for information purposes and does not affect the 339 binary. This field is only for information purposes and does not affect the
340 compression algorithm in any manner. 340 compression algorithm in any manner.
341 341
342 deflate() returns Z_OK if some progress has been made (more input 342 deflate() returns Z_OK if some progress has been made (more input
343 processed or more output produced), Z_STREAM_END if all input has been 343 processed or more output produced), Z_STREAM_END if all input has been
344 consumed and all output has been produced (only when flush is set to 344 consumed and all output has been produced (only when flush is set to
345 Z_FINISH), Z_STREAM_ERROR if the stream state was inconsistent (for example 345 Z_FINISH), Z_STREAM_ERROR if the stream state was inconsistent (for example
346 if next_in or next_out was Z_NULL), Z_BUF_ERROR if no progress is possible 346 if next_in or next_out was Z_NULL), Z_BUF_ERROR if no progress is possible
347 (for example avail_in or avail_out was zero). Note that Z_BUF_ERROR is not 347 (for example avail_in or avail_out was zero). Note that Z_BUF_ERROR is not
348 fatal, and deflate() can be called again with more input and more output 348 fatal, and deflate() can be called again with more input and more output
349 space to continue compressing. 349 space to continue compressing.
350*/ 350*/
351 351
352 352
353ZEXTERN int ZEXPORT deflateEnd OF((z_streamp strm)); 353ZEXTERN int ZEXPORT deflateEnd OF((z_streamp strm));
354/* 354/*
355 All dynamically allocated data structures for this stream are freed. 355 All dynamically allocated data structures for this stream are freed.
356 This function discards any unprocessed input and does not flush any pending 356 This function discards any unprocessed input and does not flush any pending
357 output. 357 output.
358 358
359 deflateEnd returns Z_OK if success, Z_STREAM_ERROR if the 359 deflateEnd returns Z_OK if success, Z_STREAM_ERROR if the
360 stream state was inconsistent, Z_DATA_ERROR if the stream was freed 360 stream state was inconsistent, Z_DATA_ERROR if the stream was freed
361 prematurely (some input or output was discarded). In the error case, msg 361 prematurely (some input or output was discarded). In the error case, msg
362 may be set but then points to a static string (which must not be 362 may be set but then points to a static string (which must not be
363 deallocated). 363 deallocated).
364*/ 364*/
365 365
366 366
367/* 367/*
368ZEXTERN int ZEXPORT inflateInit OF((z_streamp strm)); 368ZEXTERN int ZEXPORT inflateInit OF((z_streamp strm));
369 369
370 Initializes the internal stream state for decompression. The fields 370 Initializes the internal stream state for decompression. The fields
371 next_in, avail_in, zalloc, zfree and opaque must be initialized before by 371 next_in, avail_in, zalloc, zfree and opaque must be initialized before by
372 the caller. If next_in is not Z_NULL and avail_in is large enough (the 372 the caller. If next_in is not Z_NULL and avail_in is large enough (the
373 exact value depends on the compression method), inflateInit determines the 373 exact value depends on the compression method), inflateInit determines the
374 compression method from the zlib header and allocates all data structures 374 compression method from the zlib header and allocates all data structures
375 accordingly; otherwise the allocation will be deferred to the first call of 375 accordingly; otherwise the allocation will be deferred to the first call of
376 inflate. If zalloc and zfree are set to Z_NULL, inflateInit updates them to 376 inflate. If zalloc and zfree are set to Z_NULL, inflateInit updates them to
377 use default allocation functions. 377 use default allocation functions.
378 378
379 inflateInit returns Z_OK if success, Z_MEM_ERROR if there was not enough 379 inflateInit returns Z_OK if success, Z_MEM_ERROR if there was not enough
380 memory, Z_VERSION_ERROR if the zlib library version is incompatible with the 380 memory, Z_VERSION_ERROR if the zlib library version is incompatible with the
381 version assumed by the caller, or Z_STREAM_ERROR if the parameters are 381 version assumed by the caller, or Z_STREAM_ERROR if the parameters are
382 invalid, such as a null pointer to the structure. msg is set to null if 382 invalid, such as a null pointer to the structure. msg is set to null if
383 there is no error message. inflateInit does not perform any decompression 383 there is no error message. inflateInit does not perform any decompression
384 apart from possibly reading the zlib header if present: actual decompression 384 apart from possibly reading the zlib header if present: actual decompression
385 will be done by inflate(). (So next_in and avail_in may be modified, but 385 will be done by inflate(). (So next_in and avail_in may be modified, but
386 next_out and avail_out are unused and unchanged.) The current implementation 386 next_out and avail_out are unused and unchanged.) The current implementation
387 of inflateInit() does not process any header information -- that is deferred 387 of inflateInit() does not process any header information -- that is deferred
388 until inflate() is called. 388 until inflate() is called.
389*/ 389*/
390 390
391 391
392ZEXTERN int ZEXPORT inflate OF((z_streamp strm, int flush)); 392ZEXTERN int ZEXPORT inflate OF((z_streamp strm, int flush));
393/* 393/*
394 inflate decompresses as much data as possible, and stops when the input 394 inflate decompresses as much data as possible, and stops when the input
395 buffer becomes empty or the output buffer becomes full. It may introduce 395 buffer becomes empty or the output buffer becomes full. It may introduce
396 some output latency (reading input without producing any output) except when 396 some output latency (reading input without producing any output) except when
397 forced to flush. 397 forced to flush.
398 398
399 The detailed semantics are as follows. inflate performs one or both of the 399 The detailed semantics are as follows. inflate performs one or both of the
400 following actions: 400 following actions:
401 401
402 - Decompress more input starting at next_in and update next_in and avail_in 402 - Decompress more input starting at next_in and update next_in and avail_in
403 accordingly. If not all input can be processed (because there is not 403 accordingly. If not all input can be processed (because there is not
404 enough room in the output buffer), next_in is updated and processing will 404 enough room in the output buffer), next_in is updated and processing will
405 resume at this point for the next call of inflate(). 405 resume at this point for the next call of inflate().
406 406
407 - Provide more output starting at next_out and update next_out and avail_out 407 - Provide more output starting at next_out and update next_out and avail_out
408 accordingly. inflate() provides as much output as possible, until there is 408 accordingly. inflate() provides as much output as possible, until there is
409 no more input data or no more space in the output buffer (see below about 409 no more input data or no more space in the output buffer (see below about
410 the flush parameter). 410 the flush parameter).
411 411
412 Before the call of inflate(), the application should ensure that at least 412 Before the call of inflate(), the application should ensure that at least
413 one of the actions is possible, by providing more input and/or consuming more 413 one of the actions is possible, by providing more input and/or consuming more
414 output, and updating the next_* and avail_* values accordingly. The 414 output, and updating the next_* and avail_* values accordingly. The
415 application can consume the uncompressed output when it wants, for example 415 application can consume the uncompressed output when it wants, for example
416 when the output buffer is full (avail_out == 0), or after each call of 416 when the output buffer is full (avail_out == 0), or after each call of
417 inflate(). If inflate returns Z_OK and with zero avail_out, it must be 417 inflate(). If inflate returns Z_OK and with zero avail_out, it must be
418 called again after making room in the output buffer because there might be 418 called again after making room in the output buffer because there might be
419 more output pending. 419 more output pending.
420 420
421 The flush parameter of inflate() can be Z_NO_FLUSH, Z_SYNC_FLUSH, Z_FINISH, 421 The flush parameter of inflate() can be Z_NO_FLUSH, Z_SYNC_FLUSH, Z_FINISH,
422 Z_BLOCK, or Z_TREES. Z_SYNC_FLUSH requests that inflate() flush as much 422 Z_BLOCK, or Z_TREES. Z_SYNC_FLUSH requests that inflate() flush as much
423 output as possible to the output buffer. Z_BLOCK requests that inflate() 423 output as possible to the output buffer. Z_BLOCK requests that inflate()
424 stop if and when it gets to the next deflate block boundary. When decoding 424 stop if and when it gets to the next deflate block boundary. When decoding
425 the zlib or gzip format, this will cause inflate() to return immediately 425 the zlib or gzip format, this will cause inflate() to return immediately
426 after the header and before the first block. When doing a raw inflate, 426 after the header and before the first block. When doing a raw inflate,
427 inflate() will go ahead and process the first block, and will return when it 427 inflate() will go ahead and process the first block, and will return when it
428 gets to the end of that block, or when it runs out of data. 428 gets to the end of that block, or when it runs out of data.
429 429
430 The Z_BLOCK option assists in appending to or combining deflate streams. 430 The Z_BLOCK option assists in appending to or combining deflate streams.
431 Also to assist in this, on return inflate() will set strm->data_type to the 431 Also to assist in this, on return inflate() will set strm->data_type to the
432 number of unused bits in the last byte taken from strm->next_in, plus 64 if 432 number of unused bits in the last byte taken from strm->next_in, plus 64 if
433 inflate() is currently decoding the last block in the deflate stream, plus 433 inflate() is currently decoding the last block in the deflate stream, plus
434 128 if inflate() returned immediately after decoding an end-of-block code or 434 128 if inflate() returned immediately after decoding an end-of-block code or
435 decoding the complete header up to just before the first byte of the deflate 435 decoding the complete header up to just before the first byte of the deflate
436 stream. The end-of-block will not be indicated until all of the uncompressed 436 stream. The end-of-block will not be indicated until all of the uncompressed
437 data from that block has been written to strm->next_out. The number of 437 data from that block has been written to strm->next_out. The number of
438 unused bits may in general be greater than seven, except when bit 7 of 438 unused bits may in general be greater than seven, except when bit 7 of
439 data_type is set, in which case the number of unused bits will be less than 439 data_type is set, in which case the number of unused bits will be less than
440 eight. data_type is set as noted here every time inflate() returns for all 440 eight. data_type is set as noted here every time inflate() returns for all
441 flush options, and so can be used to determine the amount of currently 441 flush options, and so can be used to determine the amount of currently
442 consumed input in bits. 442 consumed input in bits.
443 443
444 The Z_TREES option behaves as Z_BLOCK does, but it also returns when the 444 The Z_TREES option behaves as Z_BLOCK does, but it also returns when the
445 end of each deflate block header is reached, before any actual data in that 445 end of each deflate block header is reached, before any actual data in that
446 block is decoded. This allows the caller to determine the length of the 446 block is decoded. This allows the caller to determine the length of the
447 deflate block header for later use in random access within a deflate block. 447 deflate block header for later use in random access within a deflate block.
448 256 is added to the value of strm->data_type when inflate() returns 448 256 is added to the value of strm->data_type when inflate() returns
449 immediately after reaching the end of the deflate block header. 449 immediately after reaching the end of the deflate block header.
450 450
451 inflate() should normally be called until it returns Z_STREAM_END or an 451 inflate() should normally be called until it returns Z_STREAM_END or an
452 error. However if all decompression is to be performed in a single step (a 452 error. However if all decompression is to be performed in a single step (a
453 single call of inflate), the parameter flush should be set to Z_FINISH. In 453 single call of inflate), the parameter flush should be set to Z_FINISH. In
454 this case all pending input is processed and all pending output is flushed; 454 this case all pending input is processed and all pending output is flushed;
455 avail_out must be large enough to hold all of the uncompressed data for the 455 avail_out must be large enough to hold all of the uncompressed data for the
456 operation to complete. (The size of the uncompressed data may have been 456 operation to complete. (The size of the uncompressed data may have been
457 saved by the compressor for this purpose.) The use of Z_FINISH is not 457 saved by the compressor for this purpose.) The use of Z_FINISH is not
458 required to perform an inflation in one step. However it may be used to 458 required to perform an inflation in one step. However it may be used to
459 inform inflate that a faster approach can be used for the single inflate() 459 inform inflate that a faster approach can be used for the single inflate()
460 call. Z_FINISH also informs inflate to not maintain a sliding window if the 460 call. Z_FINISH also informs inflate to not maintain a sliding window if the
461 stream completes, which reduces inflate's memory footprint. If the stream 461 stream completes, which reduces inflate's memory footprint. If the stream
462 does not complete, either because not all of the stream is provided or not 462 does not complete, either because not all of the stream is provided or not
463 enough output space is provided, then a sliding window will be allocated and 463 enough output space is provided, then a sliding window will be allocated and
464 inflate() can be called again to continue the operation as if Z_NO_FLUSH had 464 inflate() can be called again to continue the operation as if Z_NO_FLUSH had
465 been used. 465 been used.
466 466
467 In this implementation, inflate() always flushes as much output as 467 In this implementation, inflate() always flushes as much output as
468 possible to the output buffer, and always uses the faster approach on the 468 possible to the output buffer, and always uses the faster approach on the
469 first call. So the effects of the flush parameter in this implementation are 469 first call. So the effects of the flush parameter in this implementation are
470 on the return value of inflate() as noted below, when inflate() returns early 470 on the return value of inflate() as noted below, when inflate() returns early
471 when Z_BLOCK or Z_TREES is used, and when inflate() avoids the allocation of 471 when Z_BLOCK or Z_TREES is used, and when inflate() avoids the allocation of
472 memory for a sliding window when Z_FINISH is used. 472 memory for a sliding window when Z_FINISH is used.
473 473
474 If a preset dictionary is needed after this call (see inflateSetDictionary 474 If a preset dictionary is needed after this call (see inflateSetDictionary
475 below), inflate sets strm->adler to the Adler-32 checksum of the dictionary 475 below), inflate sets strm->adler to the Adler-32 checksum of the dictionary
476 chosen by the compressor and returns Z_NEED_DICT; otherwise it sets 476 chosen by the compressor and returns Z_NEED_DICT; otherwise it sets
477 strm->adler to the Adler-32 checksum of all output produced so far (that is, 477 strm->adler to the Adler-32 checksum of all output produced so far (that is,
478 total_out bytes) and returns Z_OK, Z_STREAM_END or an error code as described 478 total_out bytes) and returns Z_OK, Z_STREAM_END or an error code as described
479 below. At the end of the stream, inflate() checks that its computed adler32 479 below. At the end of the stream, inflate() checks that its computed adler32
480 checksum is equal to that saved by the compressor and returns Z_STREAM_END 480 checksum is equal to that saved by the compressor and returns Z_STREAM_END
481 only if the checksum is correct. 481 only if the checksum is correct.
482 482
483 inflate() can decompress and check either zlib-wrapped or gzip-wrapped 483 inflate() can decompress and check either zlib-wrapped or gzip-wrapped
484 deflate data. The header type is detected automatically, if requested when 484 deflate data. The header type is detected automatically, if requested when
485 initializing with inflateInit2(). Any information contained in the gzip 485 initializing with inflateInit2(). Any information contained in the gzip
486 header is not retained, so applications that need that information should 486 header is not retained, so applications that need that information should
487 instead use raw inflate, see inflateInit2() below, or inflateBack() and 487 instead use raw inflate, see inflateInit2() below, or inflateBack() and
488 perform their own processing of the gzip header and trailer. When processing 488 perform their own processing of the gzip header and trailer. When processing
489 gzip-wrapped deflate data, strm->adler32 is set to the CRC-32 of the output 489 gzip-wrapped deflate data, strm->adler32 is set to the CRC-32 of the output
490 producted so far. The CRC-32 is checked against the gzip trailer. 490 producted so far. The CRC-32 is checked against the gzip trailer.
491 491
492 inflate() returns Z_OK if some progress has been made (more input processed 492 inflate() returns Z_OK if some progress has been made (more input processed
493 or more output produced), Z_STREAM_END if the end of the compressed data has 493 or more output produced), Z_STREAM_END if the end of the compressed data has
494 been reached and all uncompressed output has been produced, Z_NEED_DICT if a 494 been reached and all uncompressed output has been produced, Z_NEED_DICT if a
495 preset dictionary is needed at this point, Z_DATA_ERROR if the input data was 495 preset dictionary is needed at this point, Z_DATA_ERROR if the input data was
496 corrupted (input stream not conforming to the zlib format or incorrect check 496 corrupted (input stream not conforming to the zlib format or incorrect check
497 value), Z_STREAM_ERROR if the stream structure was inconsistent (for example 497 value), Z_STREAM_ERROR if the stream structure was inconsistent (for example
498 next_in or next_out was Z_NULL), Z_MEM_ERROR if there was not enough memory, 498 next_in or next_out was Z_NULL), Z_MEM_ERROR if there was not enough memory,
499 Z_BUF_ERROR if no progress is possible or if there was not enough room in the 499 Z_BUF_ERROR if no progress is possible or if there was not enough room in the
500 output buffer when Z_FINISH is used. Note that Z_BUF_ERROR is not fatal, and 500 output buffer when Z_FINISH is used. Note that Z_BUF_ERROR is not fatal, and
501 inflate() can be called again with more input and more output space to 501 inflate() can be called again with more input and more output space to
502 continue decompressing. If Z_DATA_ERROR is returned, the application may 502 continue decompressing. If Z_DATA_ERROR is returned, the application may
503 then call inflateSync() to look for a good compression block if a partial 503 then call inflateSync() to look for a good compression block if a partial
504 recovery of the data is desired. 504 recovery of the data is desired.
505*/ 505*/
506 506
507 507
508ZEXTERN int ZEXPORT inflateEnd OF((z_streamp strm)); 508ZEXTERN int ZEXPORT inflateEnd OF((z_streamp strm));
509/* 509/*
510 All dynamically allocated data structures for this stream are freed. 510 All dynamically allocated data structures for this stream are freed.
511 This function discards any unprocessed input and does not flush any pending 511 This function discards any unprocessed input and does not flush any pending
512 output. 512 output.
513 513
514 inflateEnd returns Z_OK if success, Z_STREAM_ERROR if the stream state 514 inflateEnd returns Z_OK if success, Z_STREAM_ERROR if the stream state
515 was inconsistent. In the error case, msg may be set but then points to a 515 was inconsistent. In the error case, msg may be set but then points to a
516 static string (which must not be deallocated). 516 static string (which must not be deallocated).
517*/ 517*/
518 518
519 519
520 /* Advanced functions */ 520 /* Advanced functions */
521 521
522/* 522/*
523 The following functions are needed only in some special applications. 523 The following functions are needed only in some special applications.
524*/ 524*/
525 525
526/* 526/*
527ZEXTERN int ZEXPORT deflateInit2 OF((z_streamp strm, 527ZEXTERN int ZEXPORT deflateInit2 OF((z_streamp strm,
528 int level, 528 int level,
529 int method, 529 int method,
530 int windowBits, 530 int windowBits,
531 int memLevel, 531 int memLevel,
532 int strategy)); 532 int strategy));
533 533
534 This is another version of deflateInit with more compression options. The 534 This is another version of deflateInit with more compression options. The
535 fields next_in, zalloc, zfree and opaque must be initialized before by the 535 fields next_in, zalloc, zfree and opaque must be initialized before by the
536 caller. 536 caller.
537 537
538 The method parameter is the compression method. It must be Z_DEFLATED in 538 The method parameter is the compression method. It must be Z_DEFLATED in
539 this version of the library. 539 this version of the library.
540 540
541 The windowBits parameter is the base two logarithm of the window size 541 The windowBits parameter is the base two logarithm of the window size
542 (the size of the history buffer). It should be in the range 8..15 for this 542 (the size of the history buffer). It should be in the range 8..15 for this
543 version of the library. Larger values of this parameter result in better 543 version of the library. Larger values of this parameter result in better
544 compression at the expense of memory usage. The default value is 15 if 544 compression at the expense of memory usage. The default value is 15 if
545 deflateInit is used instead. 545 deflateInit is used instead.
546 546
547 windowBits can also be -8..-15 for raw deflate. In this case, -windowBits 547 windowBits can also be -8..-15 for raw deflate. In this case, -windowBits
548 determines the window size. deflate() will then generate raw deflate data 548 determines the window size. deflate() will then generate raw deflate data
549 with no zlib header or trailer, and will not compute an adler32 check value. 549 with no zlib header or trailer, and will not compute an adler32 check value.
550 550
551 windowBits can also be greater than 15 for optional gzip encoding. Add 551 windowBits can also be greater than 15 for optional gzip encoding. Add
552 16 to windowBits to write a simple gzip header and trailer around the 552 16 to windowBits to write a simple gzip header and trailer around the
553 compressed data instead of a zlib wrapper. The gzip header will have no 553 compressed data instead of a zlib wrapper. The gzip header will have no
554 file name, no extra data, no comment, no modification time (set to zero), no 554 file name, no extra data, no comment, no modification time (set to zero), no
555 header crc, and the operating system will be set to 255 (unknown). If a 555 header crc, and the operating system will be set to 255 (unknown). If a
556 gzip stream is being written, strm->adler is a crc32 instead of an adler32. 556 gzip stream is being written, strm->adler is a crc32 instead of an adler32.
557 557
558 The memLevel parameter specifies how much memory should be allocated 558 The memLevel parameter specifies how much memory should be allocated
559 for the internal compression state. memLevel=1 uses minimum memory but is 559 for the internal compression state. memLevel=1 uses minimum memory but is
560 slow and reduces compression ratio; memLevel=9 uses maximum memory for 560 slow and reduces compression ratio; memLevel=9 uses maximum memory for
561 optimal speed. The default value is 8. See zconf.h for total memory usage 561 optimal speed. The default value is 8. See zconf.h for total memory usage
562 as a function of windowBits and memLevel. 562 as a function of windowBits and memLevel.
563 563
564 The strategy parameter is used to tune the compression algorithm. Use the 564 The strategy parameter is used to tune the compression algorithm. Use the
565 value Z_DEFAULT_STRATEGY for normal data, Z_FILTERED for data produced by a 565 value Z_DEFAULT_STRATEGY for normal data, Z_FILTERED for data produced by a
566 filter (or predictor), Z_HUFFMAN_ONLY to force Huffman encoding only (no 566 filter (or predictor), Z_HUFFMAN_ONLY to force Huffman encoding only (no
567 string match), or Z_RLE to limit match distances to one (run-length 567 string match), or Z_RLE to limit match distances to one (run-length
568 encoding). Filtered data consists mostly of small values with a somewhat 568 encoding). Filtered data consists mostly of small values with a somewhat
569 random distribution. In this case, the compression algorithm is tuned to 569 random distribution. In this case, the compression algorithm is tuned to
570 compress them better. The effect of Z_FILTERED is to force more Huffman 570 compress them better. The effect of Z_FILTERED is to force more Huffman
571 coding and less string matching; it is somewhat intermediate between 571 coding and less string matching; it is somewhat intermediate between
572 Z_DEFAULT_STRATEGY and Z_HUFFMAN_ONLY. Z_RLE is designed to be almost as 572 Z_DEFAULT_STRATEGY and Z_HUFFMAN_ONLY. Z_RLE is designed to be almost as
573 fast as Z_HUFFMAN_ONLY, but give better compression for PNG image data. The 573 fast as Z_HUFFMAN_ONLY, but give better compression for PNG image data. The
574 strategy parameter only affects the compression ratio but not the 574 strategy parameter only affects the compression ratio but not the
575 correctness of the compressed output even if it is not set appropriately. 575 correctness of the compressed output even if it is not set appropriately.
576 Z_FIXED prevents the use of dynamic Huffman codes, allowing for a simpler 576 Z_FIXED prevents the use of dynamic Huffman codes, allowing for a simpler
577 decoder for special applications. 577 decoder for special applications.
578 578
579 deflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough 579 deflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
580 memory, Z_STREAM_ERROR if any parameter is invalid (such as an invalid 580 memory, Z_STREAM_ERROR if any parameter is invalid (such as an invalid
581 method), or Z_VERSION_ERROR if the zlib library version (zlib_version) is 581 method), or Z_VERSION_ERROR if the zlib library version (zlib_version) is
582 incompatible with the version assumed by the caller (ZLIB_VERSION). msg is 582 incompatible with the version assumed by the caller (ZLIB_VERSION). msg is
583 set to null if there is no error message. deflateInit2 does not perform any 583 set to null if there is no error message. deflateInit2 does not perform any
584 compression: this will be done by deflate(). 584 compression: this will be done by deflate().
585*/ 585*/
586 586
587ZEXTERN int ZEXPORT deflateSetDictionary OF((z_streamp strm, 587ZEXTERN int ZEXPORT deflateSetDictionary OF((z_streamp strm,
588 const Bytef *dictionary, 588 const Bytef *dictionary,
589 uInt dictLength)); 589 uInt dictLength));
590/* 590/*
591 Initializes the compression dictionary from the given byte sequence 591 Initializes the compression dictionary from the given byte sequence
592 without producing any compressed output. When using the zlib format, this 592 without producing any compressed output. When using the zlib format, this
593 function must be called immediately after deflateInit, deflateInit2 or 593 function must be called immediately after deflateInit, deflateInit2 or
594 deflateReset, and before any call of deflate. When doing raw deflate, this 594 deflateReset, and before any call of deflate. When doing raw deflate, this
595 function must be called either before any call of deflate, or immediately 595 function must be called either before any call of deflate, or immediately
596 after the completion of a deflate block, i.e. after all input has been 596 after the completion of a deflate block, i.e. after all input has been
597 consumed and all output has been delivered when using any of the flush 597 consumed and all output has been delivered when using any of the flush
598 options Z_BLOCK, Z_PARTIAL_FLUSH, Z_SYNC_FLUSH, or Z_FULL_FLUSH. The 598 options Z_BLOCK, Z_PARTIAL_FLUSH, Z_SYNC_FLUSH, or Z_FULL_FLUSH. The
599 compressor and decompressor must use exactly the same dictionary (see 599 compressor and decompressor must use exactly the same dictionary (see
600 inflateSetDictionary). 600 inflateSetDictionary).
601 601
602 The dictionary should consist of strings (byte sequences) that are likely 602 The dictionary should consist of strings (byte sequences) that are likely
603 to be encountered later in the data to be compressed, with the most commonly 603 to be encountered later in the data to be compressed, with the most commonly
604 used strings preferably put towards the end of the dictionary. Using a 604 used strings preferably put towards the end of the dictionary. Using a
605 dictionary is most useful when the data to be compressed is short and can be 605 dictionary is most useful when the data to be compressed is short and can be
606 predicted with good accuracy; the data can then be compressed better than 606 predicted with good accuracy; the data can then be compressed better than
607 with the default empty dictionary. 607 with the default empty dictionary.
608 608
609 Depending on the size of the compression data structures selected by 609 Depending on the size of the compression data structures selected by
610 deflateInit or deflateInit2, a part of the dictionary may in effect be 610 deflateInit or deflateInit2, a part of the dictionary may in effect be
611 discarded, for example if the dictionary is larger than the window size 611 discarded, for example if the dictionary is larger than the window size
612 provided in deflateInit or deflateInit2. Thus the strings most likely to be 612 provided in deflateInit or deflateInit2. Thus the strings most likely to be
613 useful should be put at the end of the dictionary, not at the front. In 613 useful should be put at the end of the dictionary, not at the front. In
614 addition, the current implementation of deflate will use at most the window 614 addition, the current implementation of deflate will use at most the window
615 size minus 262 bytes of the provided dictionary. 615 size minus 262 bytes of the provided dictionary.
616 616
617 Upon return of this function, strm->adler is set to the adler32 value 617 Upon return of this function, strm->adler is set to the adler32 value
618 of the dictionary; the decompressor may later use this value to determine 618 of the dictionary; the decompressor may later use this value to determine
619 which dictionary has been used by the compressor. (The adler32 value 619 which dictionary has been used by the compressor. (The adler32 value
620 applies to the whole dictionary even if only a subset of the dictionary is 620 applies to the whole dictionary even if only a subset of the dictionary is
621 actually used by the compressor.) If a raw deflate was requested, then the 621 actually used by the compressor.) If a raw deflate was requested, then the
622 adler32 value is not computed and strm->adler is not set. 622 adler32 value is not computed and strm->adler is not set.
623 623
624 deflateSetDictionary returns Z_OK if success, or Z_STREAM_ERROR if a 624 deflateSetDictionary returns Z_OK if success, or Z_STREAM_ERROR if a
625 parameter is invalid (e.g. dictionary being Z_NULL) or the stream state is 625 parameter is invalid (e.g. dictionary being Z_NULL) or the stream state is
626 inconsistent (for example if deflate has already been called for this stream 626 inconsistent (for example if deflate has already been called for this stream
627 or if not at a block boundary for raw deflate). deflateSetDictionary does 627 or if not at a block boundary for raw deflate). deflateSetDictionary does
628 not perform any compression: this will be done by deflate(). 628 not perform any compression: this will be done by deflate().
629*/ 629*/
630 630
631ZEXTERN int ZEXPORT deflateCopy OF((z_streamp dest, 631ZEXTERN int ZEXPORT deflateCopy OF((z_streamp dest,
632 z_streamp source)); 632 z_streamp source));
633/* 633/*
634 Sets the destination stream as a complete copy of the source stream. 634 Sets the destination stream as a complete copy of the source stream.
635 635
636 This function can be useful when several compression strategies will be 636 This function can be useful when several compression strategies will be
637 tried, for example when there are several ways of pre-processing the input 637 tried, for example when there are several ways of pre-processing the input
638 data with a filter. The streams that will be discarded should then be freed 638 data with a filter. The streams that will be discarded should then be freed
639 by calling deflateEnd. Note that deflateCopy duplicates the internal 639 by calling deflateEnd. Note that deflateCopy duplicates the internal
640 compression state which can be quite large, so this strategy is slow and can 640 compression state which can be quite large, so this strategy is slow and can
641 consume lots of memory. 641 consume lots of memory.
642 642
643 deflateCopy returns Z_OK if success, Z_MEM_ERROR if there was not 643 deflateCopy returns Z_OK if success, Z_MEM_ERROR if there was not
644 enough memory, Z_STREAM_ERROR if the source stream state was inconsistent 644 enough memory, Z_STREAM_ERROR if the source stream state was inconsistent
645 (such as zalloc being Z_NULL). msg is left unchanged in both source and 645 (such as zalloc being Z_NULL). msg is left unchanged in both source and
646 destination. 646 destination.
647*/ 647*/
648 648
649ZEXTERN int ZEXPORT deflateReset OF((z_streamp strm)); 649ZEXTERN int ZEXPORT deflateReset OF((z_streamp strm));
650/* 650/*
651 This function is equivalent to deflateEnd followed by deflateInit, 651 This function is equivalent to deflateEnd followed by deflateInit,
652 but does not free and reallocate all the internal compression state. The 652 but does not free and reallocate all the internal compression state. The
653 stream will keep the same compression level and any other attributes that 653 stream will keep the same compression level and any other attributes that
654 may have been set by deflateInit2. 654 may have been set by deflateInit2.
655 655
656 deflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source 656 deflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source
657 stream state was inconsistent (such as zalloc or state being Z_NULL). 657 stream state was inconsistent (such as zalloc or state being Z_NULL).
658*/ 658*/
659 659
660ZEXTERN int ZEXPORT deflateParams OF((z_streamp strm, 660ZEXTERN int ZEXPORT deflateParams OF((z_streamp strm,
661 int level, 661 int level,
662 int strategy)); 662 int strategy));
663/* 663/*
664 Dynamically update the compression level and compression strategy. The 664 Dynamically update the compression level and compression strategy. The
665 interpretation of level and strategy is as in deflateInit2. This can be 665 interpretation of level and strategy is as in deflateInit2. This can be
666 used to switch between compression and straight copy of the input data, or 666 used to switch between compression and straight copy of the input data, or
667 to switch to a different kind of input data requiring a different strategy. 667 to switch to a different kind of input data requiring a different strategy.
668 If the compression level is changed, the input available so far is 668 If the compression level is changed, the input available so far is
669 compressed with the old level (and may be flushed); the new level will take 669 compressed with the old level (and may be flushed); the new level will take
670 effect only at the next call of deflate(). 670 effect only at the next call of deflate().
671 671
672 Before the call of deflateParams, the stream state must be set as for 672 Before the call of deflateParams, the stream state must be set as for
673 a call of deflate(), since the currently available input may have to be 673 a call of deflate(), since the currently available input may have to be
674 compressed and flushed. In particular, strm->avail_out must be non-zero. 674 compressed and flushed. In particular, strm->avail_out must be non-zero.
675 675
676 deflateParams returns Z_OK if success, Z_STREAM_ERROR if the source 676 deflateParams returns Z_OK if success, Z_STREAM_ERROR if the source
677 stream state was inconsistent or if a parameter was invalid, Z_BUF_ERROR if 677 stream state was inconsistent or if a parameter was invalid, Z_BUF_ERROR if
678 strm->avail_out was zero. 678 strm->avail_out was zero.
679*/ 679*/
680 680
681ZEXTERN int ZEXPORT deflateTune OF((z_streamp strm, 681ZEXTERN int ZEXPORT deflateTune OF((z_streamp strm,
682 int good_length, 682 int good_length,
683 int max_lazy, 683 int max_lazy,
684 int nice_length, 684 int nice_length,
685 int max_chain)); 685 int max_chain));
686/* 686/*
687 Fine tune deflate's internal compression parameters. This should only be 687 Fine tune deflate's internal compression parameters. This should only be
688 used by someone who understands the algorithm used by zlib's deflate for 688 used by someone who understands the algorithm used by zlib's deflate for
689 searching for the best matching string, and even then only by the most 689 searching for the best matching string, and even then only by the most
690 fanatic optimizer trying to squeeze out the last compressed bit for their 690 fanatic optimizer trying to squeeze out the last compressed bit for their
691 specific input data. Read the deflate.c source code for the meaning of the 691 specific input data. Read the deflate.c source code for the meaning of the
692 max_lazy, good_length, nice_length, and max_chain parameters. 692 max_lazy, good_length, nice_length, and max_chain parameters.
693 693
694 deflateTune() can be called after deflateInit() or deflateInit2(), and 694 deflateTune() can be called after deflateInit() or deflateInit2(), and
695 returns Z_OK on success, or Z_STREAM_ERROR for an invalid deflate stream. 695 returns Z_OK on success, or Z_STREAM_ERROR for an invalid deflate stream.
696 */ 696 */
697 697
698ZEXTERN uLong ZEXPORT deflateBound OF((z_streamp strm, 698ZEXTERN uLong ZEXPORT deflateBound OF((z_streamp strm,
699 uLong sourceLen)); 699 uLong sourceLen));
700/* 700/*
701 deflateBound() returns an upper bound on the compressed size after 701 deflateBound() returns an upper bound on the compressed size after
702 deflation of sourceLen bytes. It must be called after deflateInit() or 702 deflation of sourceLen bytes. It must be called after deflateInit() or
703 deflateInit2(), and after deflateSetHeader(), if used. This would be used 703 deflateInit2(), and after deflateSetHeader(), if used. This would be used
704 to allocate an output buffer for deflation in a single pass, and so would be 704 to allocate an output buffer for deflation in a single pass, and so would be
705 called before deflate(). If that first deflate() call is provided the 705 called before deflate(). If that first deflate() call is provided the
706 sourceLen input bytes, an output buffer allocated to the size returned by 706 sourceLen input bytes, an output buffer allocated to the size returned by
707 deflateBound(), and the flush value Z_FINISH, then deflate() is guaranteed 707 deflateBound(), and the flush value Z_FINISH, then deflate() is guaranteed
708 to return Z_STREAM_END. Note that it is possible for the compressed size to 708 to return Z_STREAM_END. Note that it is possible for the compressed size to
709 be larger than the value returned by deflateBound() if flush options other 709 be larger than the value returned by deflateBound() if flush options other
710 than Z_FINISH or Z_NO_FLUSH are used. 710 than Z_FINISH or Z_NO_FLUSH are used.
711*/ 711*/
712 712
713ZEXTERN int ZEXPORT deflatePending OF((z_streamp strm, 713ZEXTERN int ZEXPORT deflatePending OF((z_streamp strm,
714 unsigned *pending, 714 unsigned *pending,
715 int *bits)); 715 int *bits));
716/* 716/*
717 deflatePending() returns the number of bytes and bits of output that have 717 deflatePending() returns the number of bytes and bits of output that have
718 been generated, but not yet provided in the available output. The bytes not 718 been generated, but not yet provided in the available output. The bytes not
719 provided would be due to the available output space having being consumed. 719 provided would be due to the available output space having being consumed.
720 The number of bits of output not provided are between 0 and 7, where they 720 The number of bits of output not provided are between 0 and 7, where they
721 await more bits to join them in order to fill out a full byte. If pending 721 await more bits to join them in order to fill out a full byte. If pending
722 or bits are Z_NULL, then those values are not set. 722 or bits are Z_NULL, then those values are not set.
723 723
724 deflatePending returns Z_OK if success, or Z_STREAM_ERROR if the source 724 deflatePending returns Z_OK if success, or Z_STREAM_ERROR if the source
725 stream state was inconsistent. 725 stream state was inconsistent.
726 */ 726 */
727 727
728ZEXTERN int ZEXPORT deflatePrime OF((z_streamp strm, 728ZEXTERN int ZEXPORT deflatePrime OF((z_streamp strm,
729 int bits, 729 int bits,
730 int value)); 730 int value));
731/* 731/*
732 deflatePrime() inserts bits in the deflate output stream. The intent 732 deflatePrime() inserts bits in the deflate output stream. The intent
733 is that this function is used to start off the deflate output with the bits 733 is that this function is used to start off the deflate output with the bits
734 leftover from a previous deflate stream when appending to it. As such, this 734 leftover from a previous deflate stream when appending to it. As such, this
735 function can only be used for raw deflate, and must be used before the first 735 function can only be used for raw deflate, and must be used before the first
736 deflate() call after a deflateInit2() or deflateReset(). bits must be less 736 deflate() call after a deflateInit2() or deflateReset(). bits must be less
737 than or equal to 16, and that many of the least significant bits of value 737 than or equal to 16, and that many of the least significant bits of value
738 will be inserted in the output. 738 will be inserted in the output.
739 739
740 deflatePrime returns Z_OK if success, Z_BUF_ERROR if there was not enough 740 deflatePrime returns Z_OK if success, Z_BUF_ERROR if there was not enough
741 room in the internal buffer to insert the bits, or Z_STREAM_ERROR if the 741 room in the internal buffer to insert the bits, or Z_STREAM_ERROR if the
742 source stream state was inconsistent. 742 source stream state was inconsistent.
743*/ 743*/
744 744
745ZEXTERN int ZEXPORT deflateSetHeader OF((z_streamp strm, 745ZEXTERN int ZEXPORT deflateSetHeader OF((z_streamp strm,
746 gz_headerp head)); 746 gz_headerp head));
747/* 747/*
748 deflateSetHeader() provides gzip header information for when a gzip 748 deflateSetHeader() provides gzip header information for when a gzip
749 stream is requested by deflateInit2(). deflateSetHeader() may be called 749 stream is requested by deflateInit2(). deflateSetHeader() may be called
750 after deflateInit2() or deflateReset() and before the first call of 750 after deflateInit2() or deflateReset() and before the first call of
751 deflate(). The text, time, os, extra field, name, and comment information 751 deflate(). The text, time, os, extra field, name, and comment information
752 in the provided gz_header structure are written to the gzip header (xflag is 752 in the provided gz_header structure are written to the gzip header (xflag is
753 ignored -- the extra flags are set according to the compression level). The 753 ignored -- the extra flags are set according to the compression level). The
754 caller must assure that, if not Z_NULL, name and comment are terminated with 754 caller must assure that, if not Z_NULL, name and comment are terminated with
755 a zero byte, and that if extra is not Z_NULL, that extra_len bytes are 755 a zero byte, and that if extra is not Z_NULL, that extra_len bytes are
756 available there. If hcrc is true, a gzip header crc is included. Note that 756 available there. If hcrc is true, a gzip header crc is included. Note that
757 the current versions of the command-line version of gzip (up through version 757 the current versions of the command-line version of gzip (up through version
758 1.3.x) do not support header crc's, and will report that it is a "multi-part 758 1.3.x) do not support header crc's, and will report that it is a "multi-part
759 gzip file" and give up. 759 gzip file" and give up.
760 760
761 If deflateSetHeader is not used, the default gzip header has text false, 761 If deflateSetHeader is not used, the default gzip header has text false,
762 the time set to zero, and os set to 255, with no extra, name, or comment 762 the time set to zero, and os set to 255, with no extra, name, or comment
763 fields. The gzip header is returned to the default state by deflateReset(). 763 fields. The gzip header is returned to the default state by deflateReset().
764 764
765 deflateSetHeader returns Z_OK if success, or Z_STREAM_ERROR if the source 765 deflateSetHeader returns Z_OK if success, or Z_STREAM_ERROR if the source
766 stream state was inconsistent. 766 stream state was inconsistent.
767*/ 767*/
768 768
769/* 769/*
770ZEXTERN int ZEXPORT inflateInit2 OF((z_streamp strm, 770ZEXTERN int ZEXPORT inflateInit2 OF((z_streamp strm,
771 int windowBits)); 771 int windowBits));
772 772
773 This is another version of inflateInit with an extra parameter. The 773 This is another version of inflateInit with an extra parameter. The
774 fields next_in, avail_in, zalloc, zfree and opaque must be initialized 774 fields next_in, avail_in, zalloc, zfree and opaque must be initialized
775 before by the caller. 775 before by the caller.
776 776
777 The windowBits parameter is the base two logarithm of the maximum window 777 The windowBits parameter is the base two logarithm of the maximum window
778 size (the size of the history buffer). It should be in the range 8..15 for 778 size (the size of the history buffer). It should be in the range 8..15 for
779 this version of the library. The default value is 15 if inflateInit is used 779 this version of the library. The default value is 15 if inflateInit is used
780 instead. windowBits must be greater than or equal to the windowBits value 780 instead. windowBits must be greater than or equal to the windowBits value
781 provided to deflateInit2() while compressing, or it must be equal to 15 if 781 provided to deflateInit2() while compressing, or it must be equal to 15 if
782 deflateInit2() was not used. If a compressed stream with a larger window 782 deflateInit2() was not used. If a compressed stream with a larger window
783 size is given as input, inflate() will return with the error code 783 size is given as input, inflate() will return with the error code
784 Z_DATA_ERROR instead of trying to allocate a larger window. 784 Z_DATA_ERROR instead of trying to allocate a larger window.
785 785
786 windowBits can also be zero to request that inflate use the window size in 786 windowBits can also be zero to request that inflate use the window size in
787 the zlib header of the compressed stream. 787 the zlib header of the compressed stream.
788 788
789 windowBits can also be -8..-15 for raw inflate. In this case, -windowBits 789 windowBits can also be -8..-15 for raw inflate. In this case, -windowBits
790 determines the window size. inflate() will then process raw deflate data, 790 determines the window size. inflate() will then process raw deflate data,
791 not looking for a zlib or gzip header, not generating a check value, and not 791 not looking for a zlib or gzip header, not generating a check value, and not
792 looking for any check values for comparison at the end of the stream. This 792 looking for any check values for comparison at the end of the stream. This
793 is for use with other formats that use the deflate compressed data format 793 is for use with other formats that use the deflate compressed data format
794 such as zip. Those formats provide their own check values. If a custom 794 such as zip. Those formats provide their own check values. If a custom
795 format is developed using the raw deflate format for compressed data, it is 795 format is developed using the raw deflate format for compressed data, it is
796 recommended that a check value such as an adler32 or a crc32 be applied to 796 recommended that a check value such as an adler32 or a crc32 be applied to
797 the uncompressed data as is done in the zlib, gzip, and zip formats. For 797 the uncompressed data as is done in the zlib, gzip, and zip formats. For
798 most applications, the zlib format should be used as is. Note that comments 798 most applications, the zlib format should be used as is. Note that comments
799 above on the use in deflateInit2() applies to the magnitude of windowBits. 799 above on the use in deflateInit2() applies to the magnitude of windowBits.
800 800
801 windowBits can also be greater than 15 for optional gzip decoding. Add 801 windowBits can also be greater than 15 for optional gzip decoding. Add
802 32 to windowBits to enable zlib and gzip decoding with automatic header 802 32 to windowBits to enable zlib and gzip decoding with automatic header
803 detection, or add 16 to decode only the gzip format (the zlib format will 803 detection, or add 16 to decode only the gzip format (the zlib format will
804 return a Z_DATA_ERROR). If a gzip stream is being decoded, strm->adler is a 804 return a Z_DATA_ERROR). If a gzip stream is being decoded, strm->adler is a
805 crc32 instead of an adler32. 805 crc32 instead of an adler32.
806 806
807 inflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough 807 inflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
808 memory, Z_VERSION_ERROR if the zlib library version is incompatible with the 808 memory, Z_VERSION_ERROR if the zlib library version is incompatible with the
809 version assumed by the caller, or Z_STREAM_ERROR if the parameters are 809 version assumed by the caller, or Z_STREAM_ERROR if the parameters are
810 invalid, such as a null pointer to the structure. msg is set to null if 810 invalid, such as a null pointer to the structure. msg is set to null if
811 there is no error message. inflateInit2 does not perform any decompression 811 there is no error message. inflateInit2 does not perform any decompression
812 apart from possibly reading the zlib header if present: actual decompression 812 apart from possibly reading the zlib header if present: actual decompression
813 will be done by inflate(). (So next_in and avail_in may be modified, but 813 will be done by inflate(). (So next_in and avail_in may be modified, but
814 next_out and avail_out are unused and unchanged.) The current implementation 814 next_out and avail_out are unused and unchanged.) The current implementation
815 of inflateInit2() does not process any header information -- that is 815 of inflateInit2() does not process any header information -- that is
816 deferred until inflate() is called. 816 deferred until inflate() is called.
817*/ 817*/
818 818
819ZEXTERN int ZEXPORT inflateSetDictionary OF((z_streamp strm, 819ZEXTERN int ZEXPORT inflateSetDictionary OF((z_streamp strm,
820 const Bytef *dictionary, 820 const Bytef *dictionary,
821 uInt dictLength)); 821 uInt dictLength));
822/* 822/*
823 Initializes the decompression dictionary from the given uncompressed byte 823 Initializes the decompression dictionary from the given uncompressed byte
824 sequence. This function must be called immediately after a call of inflate, 824 sequence. This function must be called immediately after a call of inflate,
825 if that call returned Z_NEED_DICT. The dictionary chosen by the compressor 825 if that call returned Z_NEED_DICT. The dictionary chosen by the compressor
826 can be determined from the adler32 value returned by that call of inflate. 826 can be determined from the adler32 value returned by that call of inflate.
827 The compressor and decompressor must use exactly the same dictionary (see 827 The compressor and decompressor must use exactly the same dictionary (see
828 deflateSetDictionary). For raw inflate, this function can be called at any 828 deflateSetDictionary). For raw inflate, this function can be called at any
829 time to set the dictionary. If the provided dictionary is smaller than the 829 time to set the dictionary. If the provided dictionary is smaller than the
830 window and there is already data in the window, then the provided dictionary 830 window and there is already data in the window, then the provided dictionary
831 will amend what's there. The application must insure that the dictionary 831 will amend what's there. The application must insure that the dictionary
832 that was used for compression is provided. 832 that was used for compression is provided.
833 833
834 inflateSetDictionary returns Z_OK if success, Z_STREAM_ERROR if a 834 inflateSetDictionary returns Z_OK if success, Z_STREAM_ERROR if a
835 parameter is invalid (e.g. dictionary being Z_NULL) or the stream state is 835 parameter is invalid (e.g. dictionary being Z_NULL) or the stream state is
836 inconsistent, Z_DATA_ERROR if the given dictionary doesn't match the 836 inconsistent, Z_DATA_ERROR if the given dictionary doesn't match the
837 expected one (incorrect adler32 value). inflateSetDictionary does not 837 expected one (incorrect adler32 value). inflateSetDictionary does not
838 perform any decompression: this will be done by subsequent calls of 838 perform any decompression: this will be done by subsequent calls of
839 inflate(). 839 inflate().
840*/ 840*/
841 841
842ZEXTERN int ZEXPORT inflateSync OF((z_streamp strm)); 842ZEXTERN int ZEXPORT inflateSync OF((z_streamp strm));
843/* 843/*
844 Skips invalid compressed data until a possible full flush point (see above 844 Skips invalid compressed data until a possible full flush point (see above
845 for the description of deflate with Z_FULL_FLUSH) can be found, or until all 845 for the description of deflate with Z_FULL_FLUSH) can be found, or until all
846 available input is skipped. No output is provided. 846 available input is skipped. No output is provided.
847 847
848 inflateSync searches for a 00 00 FF FF pattern in the compressed data. 848 inflateSync searches for a 00 00 FF FF pattern in the compressed data.
849 All full flush points have this pattern, but not all occurences of this 849 All full flush points have this pattern, but not all occurences of this
850 pattern are full flush points. 850 pattern are full flush points.
851 851
852 inflateSync returns Z_OK if a possible full flush point has been found, 852 inflateSync returns Z_OK if a possible full flush point has been found,
853 Z_BUF_ERROR if no more input was provided, Z_DATA_ERROR if no flush point 853 Z_BUF_ERROR if no more input was provided, Z_DATA_ERROR if no flush point
854 has been found, or Z_STREAM_ERROR if the stream structure was inconsistent. 854 has been found, or Z_STREAM_ERROR if the stream structure was inconsistent.
855 In the success case, the application may save the current current value of 855 In the success case, the application may save the current current value of
856 total_in which indicates where valid compressed data was found. In the 856 total_in which indicates where valid compressed data was found. In the
857 error case, the application may repeatedly call inflateSync, providing more 857 error case, the application may repeatedly call inflateSync, providing more
858 input each time, until success or end of the input data. 858 input each time, until success or end of the input data.
859*/ 859*/
860 860
861ZEXTERN int ZEXPORT inflateCopy OF((z_streamp dest, 861ZEXTERN int ZEXPORT inflateCopy OF((z_streamp dest,
862 z_streamp source)); 862 z_streamp source));
863/* 863/*
864 Sets the destination stream as a complete copy of the source stream. 864 Sets the destination stream as a complete copy of the source stream.
865 865
866 This function can be useful when randomly accessing a large stream. The 866 This function can be useful when randomly accessing a large stream. The
867 first pass through the stream can periodically record the inflate state, 867 first pass through the stream can periodically record the inflate state,
868 allowing restarting inflate at those points when randomly accessing the 868 allowing restarting inflate at those points when randomly accessing the
869 stream. 869 stream.
870 870
871 inflateCopy returns Z_OK if success, Z_MEM_ERROR if there was not 871 inflateCopy returns Z_OK if success, Z_MEM_ERROR if there was not
872 enough memory, Z_STREAM_ERROR if the source stream state was inconsistent 872 enough memory, Z_STREAM_ERROR if the source stream state was inconsistent
873 (such as zalloc being Z_NULL). msg is left unchanged in both source and 873 (such as zalloc being Z_NULL). msg is left unchanged in both source and
874 destination. 874 destination.
875*/ 875*/
876 876
877ZEXTERN int ZEXPORT inflateReset OF((z_streamp strm)); 877ZEXTERN int ZEXPORT inflateReset OF((z_streamp strm));
878/* 878/*
879 This function is equivalent to inflateEnd followed by inflateInit, 879 This function is equivalent to inflateEnd followed by inflateInit,
880 but does not free and reallocate all the internal decompression state. The 880 but does not free and reallocate all the internal decompression state. The
881 stream will keep attributes that may have been set by inflateInit2. 881 stream will keep attributes that may have been set by inflateInit2.
882 882
883 inflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source 883 inflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source
884 stream state was inconsistent (such as zalloc or state being Z_NULL). 884 stream state was inconsistent (such as zalloc or state being Z_NULL).
885*/ 885*/
886 886
887ZEXTERN int ZEXPORT inflateReset2 OF((z_streamp strm, 887ZEXTERN int ZEXPORT inflateReset2 OF((z_streamp strm,
888 int windowBits)); 888 int windowBits));
889/* 889/*
890 This function is the same as inflateReset, but it also permits changing 890 This function is the same as inflateReset, but it also permits changing
891 the wrap and window size requests. The windowBits parameter is interpreted 891 the wrap and window size requests. The windowBits parameter is interpreted
892 the same as it is for inflateInit2. 892 the same as it is for inflateInit2.
893 893
894 inflateReset2 returns Z_OK if success, or Z_STREAM_ERROR if the source 894 inflateReset2 returns Z_OK if success, or Z_STREAM_ERROR if the source
895 stream state was inconsistent (such as zalloc or state being Z_NULL), or if 895 stream state was inconsistent (such as zalloc or state being Z_NULL), or if
896 the windowBits parameter is invalid. 896 the windowBits parameter is invalid.
897*/ 897*/
898 898
899ZEXTERN int ZEXPORT inflatePrime OF((z_streamp strm, 899ZEXTERN int ZEXPORT inflatePrime OF((z_streamp strm,
900 int bits, 900 int bits,
901 int value)); 901 int value));
902/* 902/*
903 This function inserts bits in the inflate input stream. The intent is 903 This function inserts bits in the inflate input stream. The intent is
904 that this function is used to start inflating at a bit position in the 904 that this function is used to start inflating at a bit position in the
905 middle of a byte. The provided bits will be used before any bytes are used 905 middle of a byte. The provided bits will be used before any bytes are used
906 from next_in. This function should only be used with raw inflate, and 906 from next_in. This function should only be used with raw inflate, and
907 should be used before the first inflate() call after inflateInit2() or 907 should be used before the first inflate() call after inflateInit2() or
908 inflateReset(). bits must be less than or equal to 16, and that many of the 908 inflateReset(). bits must be less than or equal to 16, and that many of the
909 least significant bits of value will be inserted in the input. 909 least significant bits of value will be inserted in the input.
910 910
911 If bits is negative, then the input stream bit buffer is emptied. Then 911 If bits is negative, then the input stream bit buffer is emptied. Then
912 inflatePrime() can be called again to put bits in the buffer. This is used 912 inflatePrime() can be called again to put bits in the buffer. This is used
913 to clear out bits leftover after feeding inflate a block description prior 913 to clear out bits leftover after feeding inflate a block description prior
914 to feeding inflate codes. 914 to feeding inflate codes.
915 915
916 inflatePrime returns Z_OK if success, or Z_STREAM_ERROR if the source 916 inflatePrime returns Z_OK if success, or Z_STREAM_ERROR if the source
917 stream state was inconsistent. 917 stream state was inconsistent.
918*/ 918*/
919 919
920ZEXTERN long ZEXPORT inflateMark OF((z_streamp strm)); 920ZEXTERN long ZEXPORT inflateMark OF((z_streamp strm));
921/* 921/*
922 This function returns two values, one in the lower 16 bits of the return 922 This function returns two values, one in the lower 16 bits of the return
923 value, and the other in the remaining upper bits, obtained by shifting the 923 value, and the other in the remaining upper bits, obtained by shifting the
924 return value down 16 bits. If the upper value is -1 and the lower value is 924 return value down 16 bits. If the upper value is -1 and the lower value is
925 zero, then inflate() is currently decoding information outside of a block. 925 zero, then inflate() is currently decoding information outside of a block.
926 If the upper value is -1 and the lower value is non-zero, then inflate is in 926 If the upper value is -1 and the lower value is non-zero, then inflate is in
927 the middle of a stored block, with the lower value equaling the number of 927 the middle of a stored block, with the lower value equaling the number of
928 bytes from the input remaining to copy. If the upper value is not -1, then 928 bytes from the input remaining to copy. If the upper value is not -1, then
929 it is the number of bits back from the current bit position in the input of 929 it is the number of bits back from the current bit position in the input of
930 the code (literal or length/distance pair) currently being processed. In 930 the code (literal or length/distance pair) currently being processed. In
931 that case the lower value is the number of bytes already emitted for that 931 that case the lower value is the number of bytes already emitted for that
932 code. 932 code.
933 933
934 A code is being processed if inflate is waiting for more input to complete 934 A code is being processed if inflate is waiting for more input to complete
935 decoding of the code, or if it has completed decoding but is waiting for 935 decoding of the code, or if it has completed decoding but is waiting for
936 more output space to write the literal or match data. 936 more output space to write the literal or match data.
937 937
938 inflateMark() is used to mark locations in the input data for random 938 inflateMark() is used to mark locations in the input data for random
939 access, which may be at bit positions, and to note those cases where the 939 access, which may be at bit positions, and to note those cases where the
940 output of a code may span boundaries of random access blocks. The current 940 output of a code may span boundaries of random access blocks. The current
941 location in the input stream can be determined from avail_in and data_type 941 location in the input stream can be determined from avail_in and data_type
942 as noted in the description for the Z_BLOCK flush parameter for inflate. 942 as noted in the description for the Z_BLOCK flush parameter for inflate.
943 943
944 inflateMark returns the value noted above or -1 << 16 if the provided 944 inflateMark returns the value noted above or -1 << 16 if the provided
945 source stream state was inconsistent. 945 source stream state was inconsistent.
946*/ 946*/
947 947
948ZEXTERN int ZEXPORT inflateGetHeader OF((z_streamp strm, 948ZEXTERN int ZEXPORT inflateGetHeader OF((z_streamp strm,
949 gz_headerp head)); 949 gz_headerp head));
950/* 950/*
951 inflateGetHeader() requests that gzip header information be stored in the 951 inflateGetHeader() requests that gzip header information be stored in the
952 provided gz_header structure. inflateGetHeader() may be called after 952 provided gz_header structure. inflateGetHeader() may be called after
953 inflateInit2() or inflateReset(), and before the first call of inflate(). 953 inflateInit2() or inflateReset(), and before the first call of inflate().
954 As inflate() processes the gzip stream, head->done is zero until the header 954 As inflate() processes the gzip stream, head->done is zero until the header
955 is completed, at which time head->done is set to one. If a zlib stream is 955 is completed, at which time head->done is set to one. If a zlib stream is
956 being decoded, then head->done is set to -1 to indicate that there will be 956 being decoded, then head->done is set to -1 to indicate that there will be
957 no gzip header information forthcoming. Note that Z_BLOCK or Z_TREES can be 957 no gzip header information forthcoming. Note that Z_BLOCK or Z_TREES can be
958 used to force inflate() to return immediately after header processing is 958 used to force inflate() to return immediately after header processing is
959 complete and before any actual data is decompressed. 959 complete and before any actual data is decompressed.
960 960
961 The text, time, xflags, and os fields are filled in with the gzip header 961 The text, time, xflags, and os fields are filled in with the gzip header
962 contents. hcrc is set to true if there is a header CRC. (The header CRC 962 contents. hcrc is set to true if there is a header CRC. (The header CRC
963 was valid if done is set to one.) If extra is not Z_NULL, then extra_max 963 was valid if done is set to one.) If extra is not Z_NULL, then extra_max
964 contains the maximum number of bytes to write to extra. Once done is true, 964 contains the maximum number of bytes to write to extra. Once done is true,
965 extra_len contains the actual extra field length, and extra contains the 965 extra_len contains the actual extra field length, and extra contains the
966 extra field, or that field truncated if extra_max is less than extra_len. 966 extra field, or that field truncated if extra_max is less than extra_len.
967 If name is not Z_NULL, then up to name_max characters are written there, 967 If name is not Z_NULL, then up to name_max characters are written there,
968 terminated with a zero unless the length is greater than name_max. If 968 terminated with a zero unless the length is greater than name_max. If
969 comment is not Z_NULL, then up to comm_max characters are written there, 969 comment is not Z_NULL, then up to comm_max characters are written there,
970 terminated with a zero unless the length is greater than comm_max. When any 970 terminated with a zero unless the length is greater than comm_max. When any
971 of extra, name, or comment are not Z_NULL and the respective field is not 971 of extra, name, or comment are not Z_NULL and the respective field is not
972 present in the header, then that field is set to Z_NULL to signal its 972 present in the header, then that field is set to Z_NULL to signal its
973 absence. This allows the use of deflateSetHeader() with the returned 973 absence. This allows the use of deflateSetHeader() with the returned
974 structure to duplicate the header. However if those fields are set to 974 structure to duplicate the header. However if those fields are set to
975 allocated memory, then the application will need to save those pointers 975 allocated memory, then the application will need to save those pointers
976 elsewhere so that they can be eventually freed. 976 elsewhere so that they can be eventually freed.
977 977
978 If inflateGetHeader is not used, then the header information is simply 978 If inflateGetHeader is not used, then the header information is simply
979 discarded. The header is always checked for validity, including the header 979 discarded. The header is always checked for validity, including the header
980 CRC if present. inflateReset() will reset the process to discard the header 980 CRC if present. inflateReset() will reset the process to discard the header
981 information. The application would need to call inflateGetHeader() again to 981 information. The application would need to call inflateGetHeader() again to
982 retrieve the header from the next gzip stream. 982 retrieve the header from the next gzip stream.
983 983
984 inflateGetHeader returns Z_OK if success, or Z_STREAM_ERROR if the source 984 inflateGetHeader returns Z_OK if success, or Z_STREAM_ERROR if the source
985 stream state was inconsistent. 985 stream state was inconsistent.
986*/ 986*/
987 987
988/* 988/*
989ZEXTERN int ZEXPORT inflateBackInit OF((z_streamp strm, int windowBits, 989ZEXTERN int ZEXPORT inflateBackInit OF((z_streamp strm, int windowBits,
990 unsigned char FAR *window)); 990 unsigned char FAR *window));
991 991
992 Initialize the internal stream state for decompression using inflateBack() 992 Initialize the internal stream state for decompression using inflateBack()
993 calls. The fields zalloc, zfree and opaque in strm must be initialized 993 calls. The fields zalloc, zfree and opaque in strm must be initialized
994 before the call. If zalloc and zfree are Z_NULL, then the default library- 994 before the call. If zalloc and zfree are Z_NULL, then the default library-
995 derived memory allocation routines are used. windowBits is the base two 995 derived memory allocation routines are used. windowBits is the base two
996 logarithm of the window size, in the range 8..15. window is a caller 996 logarithm of the window size, in the range 8..15. window is a caller
997 supplied buffer of that size. Except for special applications where it is 997 supplied buffer of that size. Except for special applications where it is
998 assured that deflate was used with small window sizes, windowBits must be 15 998 assured that deflate was used with small window sizes, windowBits must be 15
999 and a 32K byte window must be supplied to be able to decompress general 999 and a 32K byte window must be supplied to be able to decompress general
1000 deflate streams. 1000 deflate streams.
1001 1001
1002 See inflateBack() for the usage of these routines. 1002 See inflateBack() for the usage of these routines.
1003 1003
1004 inflateBackInit will return Z_OK on success, Z_STREAM_ERROR if any of 1004 inflateBackInit will return Z_OK on success, Z_STREAM_ERROR if any of
1005 the parameters are invalid, Z_MEM_ERROR if the internal state could not be 1005 the parameters are invalid, Z_MEM_ERROR if the internal state could not be
1006 allocated, or Z_VERSION_ERROR if the version of the library does not match 1006 allocated, or Z_VERSION_ERROR if the version of the library does not match
1007 the version of the header file. 1007 the version of the header file.
1008*/ 1008*/
1009 1009
1010typedef unsigned (*in_func) OF((void FAR *, unsigned char FAR * FAR *)); 1010typedef unsigned (*in_func) OF((void FAR *, unsigned char FAR * FAR *));
1011typedef int (*out_func) OF((void FAR *, unsigned char FAR *, unsigned)); 1011typedef int (*out_func) OF((void FAR *, unsigned char FAR *, unsigned));
1012 1012
1013ZEXTERN int ZEXPORT inflateBack OF((z_streamp strm, 1013ZEXTERN int ZEXPORT inflateBack OF((z_streamp strm,
1014 in_func in, void FAR *in_desc, 1014 in_func in, void FAR *in_desc,
1015 out_func out, void FAR *out_desc)); 1015 out_func out, void FAR *out_desc));
1016/* 1016/*
1017 inflateBack() does a raw inflate with a single call using a call-back 1017 inflateBack() does a raw inflate with a single call using a call-back
1018 interface for input and output. This is more efficient than inflate() for 1018 interface for input and output. This is more efficient than inflate() for
1019 file i/o applications in that it avoids copying between the output and the 1019 file i/o applications in that it avoids copying between the output and the
1020 sliding window by simply making the window itself the output buffer. This 1020 sliding window by simply making the window itself the output buffer. This
1021 function trusts the application to not change the output buffer passed by 1021 function trusts the application to not change the output buffer passed by
1022 the output function, at least until inflateBack() returns. 1022 the output function, at least until inflateBack() returns.
1023 1023
1024 inflateBackInit() must be called first to allocate the internal state 1024 inflateBackInit() must be called first to allocate the internal state
1025 and to initialize the state with the user-provided window buffer. 1025 and to initialize the state with the user-provided window buffer.
1026 inflateBack() may then be used multiple times to inflate a complete, raw 1026 inflateBack() may then be used multiple times to inflate a complete, raw
1027 deflate stream with each call. inflateBackEnd() is then called to free the 1027 deflate stream with each call. inflateBackEnd() is then called to free the
1028 allocated state. 1028 allocated state.
1029 1029
1030 A raw deflate stream is one with no zlib or gzip header or trailer. 1030 A raw deflate stream is one with no zlib or gzip header or trailer.
1031 This routine would normally be used in a utility that reads zip or gzip 1031 This routine would normally be used in a utility that reads zip or gzip
1032 files and writes out uncompressed files. The utility would decode the 1032 files and writes out uncompressed files. The utility would decode the
1033 header and process the trailer on its own, hence this routine expects only 1033 header and process the trailer on its own, hence this routine expects only
1034 the raw deflate stream to decompress. This is different from the normal 1034 the raw deflate stream to decompress. This is different from the normal
1035 behavior of inflate(), which expects either a zlib or gzip header and 1035 behavior of inflate(), which expects either a zlib or gzip header and
1036 trailer around the deflate stream. 1036 trailer around the deflate stream.
1037 1037
1038 inflateBack() uses two subroutines supplied by the caller that are then 1038 inflateBack() uses two subroutines supplied by the caller that are then
1039 called by inflateBack() for input and output. inflateBack() calls those 1039 called by inflateBack() for input and output. inflateBack() calls those
1040 routines until it reads a complete deflate stream and writes out all of the 1040 routines until it reads a complete deflate stream and writes out all of the
1041 uncompressed data, or until it encounters an error. The function's 1041 uncompressed data, or until it encounters an error. The function's
1042 parameters and return types are defined above in the in_func and out_func 1042 parameters and return types are defined above in the in_func and out_func
1043 typedefs. inflateBack() will call in(in_desc, &buf) which should return the 1043 typedefs. inflateBack() will call in(in_desc, &buf) which should return the
1044 number of bytes of provided input, and a pointer to that input in buf. If 1044 number of bytes of provided input, and a pointer to that input in buf. If
1045 there is no input available, in() must return zero--buf is ignored in that 1045 there is no input available, in() must return zero--buf is ignored in that
1046 case--and inflateBack() will return a buffer error. inflateBack() will call 1046 case--and inflateBack() will return a buffer error. inflateBack() will call
1047 out(out_desc, buf, len) to write the uncompressed data buf[0..len-1]. out() 1047 out(out_desc, buf, len) to write the uncompressed data buf[0..len-1]. out()
1048 should return zero on success, or non-zero on failure. If out() returns 1048 should return zero on success, or non-zero on failure. If out() returns
1049 non-zero, inflateBack() will return with an error. Neither in() nor out() 1049 non-zero, inflateBack() will return with an error. Neither in() nor out()
1050 are permitted to change the contents of the window provided to 1050 are permitted to change the contents of the window provided to
1051 inflateBackInit(), which is also the buffer that out() uses to write from. 1051 inflateBackInit(), which is also the buffer that out() uses to write from.
1052 The length written by out() will be at most the window size. Any non-zero 1052 The length written by out() will be at most the window size. Any non-zero
1053 amount of input may be provided by in(). 1053 amount of input may be provided by in().
1054 1054
1055 For convenience, inflateBack() can be provided input on the first call by 1055 For convenience, inflateBack() can be provided input on the first call by
1056 setting strm->next_in and strm->avail_in. If that input is exhausted, then 1056 setting strm->next_in and strm->avail_in. If that input is exhausted, then
1057 in() will be called. Therefore strm->next_in must be initialized before 1057 in() will be called. Therefore strm->next_in must be initialized before
1058 calling inflateBack(). If strm->next_in is Z_NULL, then in() will be called 1058 calling inflateBack(). If strm->next_in is Z_NULL, then in() will be called
1059 immediately for input. If strm->next_in is not Z_NULL, then strm->avail_in 1059 immediately for input. If strm->next_in is not Z_NULL, then strm->avail_in
1060 must also be initialized, and then if strm->avail_in is not zero, input will 1060 must also be initialized, and then if strm->avail_in is not zero, input will
1061 initially be taken from strm->next_in[0 .. strm->avail_in - 1]. 1061 initially be taken from strm->next_in[0 .. strm->avail_in - 1].
1062 1062
1063 The in_desc and out_desc parameters of inflateBack() is passed as the 1063 The in_desc and out_desc parameters of inflateBack() is passed as the
1064 first parameter of in() and out() respectively when they are called. These 1064 first parameter of in() and out() respectively when they are called. These
1065 descriptors can be optionally used to pass any information that the caller- 1065 descriptors can be optionally used to pass any information that the caller-
1066 supplied in() and out() functions need to do their job. 1066 supplied in() and out() functions need to do their job.
1067 1067
1068 On return, inflateBack() will set strm->next_in and strm->avail_in to 1068 On return, inflateBack() will set strm->next_in and strm->avail_in to
1069 pass back any unused input that was provided by the last in() call. The 1069 pass back any unused input that was provided by the last in() call. The
1070 return values of inflateBack() can be Z_STREAM_END on success, Z_BUF_ERROR 1070 return values of inflateBack() can be Z_STREAM_END on success, Z_BUF_ERROR
1071 if in() or out() returned an error, Z_DATA_ERROR if there was a format error 1071 if in() or out() returned an error, Z_DATA_ERROR if there was a format error
1072 in the deflate stream (in which case strm->msg is set to indicate the nature 1072 in the deflate stream (in which case strm->msg is set to indicate the nature
1073 of the error), or Z_STREAM_ERROR if the stream was not properly initialized. 1073 of the error), or Z_STREAM_ERROR if the stream was not properly initialized.
1074 In the case of Z_BUF_ERROR, an input or output error can be distinguished 1074 In the case of Z_BUF_ERROR, an input or output error can be distinguished
1075 using strm->next_in which will be Z_NULL only if in() returned an error. If 1075 using strm->next_in which will be Z_NULL only if in() returned an error. If
1076 strm->next_in is not Z_NULL, then the Z_BUF_ERROR was due to out() returning 1076 strm->next_in is not Z_NULL, then the Z_BUF_ERROR was due to out() returning
1077 non-zero. (in() will always be called before out(), so strm->next_in is 1077 non-zero. (in() will always be called before out(), so strm->next_in is
1078 assured to be defined if out() returns non-zero.) Note that inflateBack() 1078 assured to be defined if out() returns non-zero.) Note that inflateBack()
1079 cannot return Z_OK. 1079 cannot return Z_OK.
1080*/ 1080*/
1081 1081
1082ZEXTERN int ZEXPORT inflateBackEnd OF((z_streamp strm)); 1082ZEXTERN int ZEXPORT inflateBackEnd OF((z_streamp strm));
1083/* 1083/*
1084 All memory allocated by inflateBackInit() is freed. 1084 All memory allocated by inflateBackInit() is freed.
1085 1085
1086 inflateBackEnd() returns Z_OK on success, or Z_STREAM_ERROR if the stream 1086 inflateBackEnd() returns Z_OK on success, or Z_STREAM_ERROR if the stream
1087 state was inconsistent. 1087 state was inconsistent.
1088*/ 1088*/
1089 1089
1090ZEXTERN uLong ZEXPORT zlibCompileFlags OF((void)); 1090ZEXTERN uLong ZEXPORT zlibCompileFlags OF((void));
1091/* Return flags indicating compile-time options. 1091/* Return flags indicating compile-time options.
1092 1092
1093 Type sizes, two bits each, 00 = 16 bits, 01 = 32, 10 = 64, 11 = other: 1093 Type sizes, two bits each, 00 = 16 bits, 01 = 32, 10 = 64, 11 = other:
1094 1.0: size of uInt 1094 1.0: size of uInt
1095 3.2: size of uLong 1095 3.2: size of uLong
1096 5.4: size of voidpf (pointer) 1096 5.4: size of voidpf (pointer)
1097 7.6: size of z_off_t 1097 7.6: size of z_off_t
1098 1098
1099 Compiler, assembler, and debug options: 1099 Compiler, assembler, and debug options:
1100 8: DEBUG 1100 8: DEBUG
1101 9: ASMV or ASMINF -- use ASM code 1101 9: ASMV or ASMINF -- use ASM code
1102 10: ZLIB_WINAPI -- exported functions use the WINAPI calling convention 1102 10: ZLIB_WINAPI -- exported functions use the WINAPI calling convention
1103 11: 0 (reserved) 1103 11: 0 (reserved)
1104 1104
1105 One-time table building (smaller code, but not thread-safe if true): 1105 One-time table building (smaller code, but not thread-safe if true):
1106 12: BUILDFIXED -- build static block decoding tables when needed 1106 12: BUILDFIXED -- build static block decoding tables when needed
1107 13: DYNAMIC_CRC_TABLE -- build CRC calculation tables when needed 1107 13: DYNAMIC_CRC_TABLE -- build CRC calculation tables when needed
1108 14,15: 0 (reserved) 1108 14,15: 0 (reserved)
1109 1109
1110 Library content (indicates missing functionality): 1110 Library content (indicates missing functionality):
1111 16: NO_GZCOMPRESS -- gz* functions cannot compress (to avoid linking 1111 16: NO_GZCOMPRESS -- gz* functions cannot compress (to avoid linking
1112 deflate code when not needed) 1112 deflate code when not needed)
1113 17: NO_GZIP -- deflate can't write gzip streams, and inflate can't detect 1113 17: NO_GZIP -- deflate can't write gzip streams, and inflate can't detect
1114 and decode gzip streams (to avoid linking crc code) 1114 and decode gzip streams (to avoid linking crc code)
1115 18-19: 0 (reserved) 1115 18-19: 0 (reserved)
1116 1116
1117 Operation variations (changes in library functionality): 1117 Operation variations (changes in library functionality):
1118 20: PKZIP_BUG_WORKAROUND -- slightly more permissive inflate 1118 20: PKZIP_BUG_WORKAROUND -- slightly more permissive inflate
1119 21: FASTEST -- deflate algorithm with only one, lowest compression level 1119 21: FASTEST -- deflate algorithm with only one, lowest compression level
1120 22,23: 0 (reserved) 1120 22,23: 0 (reserved)
1121 1121
1122 The sprintf variant used by gzprintf (zero is best): 1122 The sprintf variant used by gzprintf (zero is best):
1123 24: 0 = vs*, 1 = s* -- 1 means limited to 20 arguments after the format 1123 24: 0 = vs*, 1 = s* -- 1 means limited to 20 arguments after the format
1124 25: 0 = *nprintf, 1 = *printf -- 1 means gzprintf() not secure! 1124 25: 0 = *nprintf, 1 = *printf -- 1 means gzprintf() not secure!
1125 26: 0 = returns value, 1 = void -- 1 means inferred string length returned 1125 26: 0 = returns value, 1 = void -- 1 means inferred string length returned
1126 1126
1127 Remainder: 1127 Remainder:
1128 27-31: 0 (reserved) 1128 27-31: 0 (reserved)
1129 */ 1129 */
1130 1130
1131#ifndef Z_SOLO 1131#ifndef Z_SOLO
1132 1132
1133 /* utility functions */ 1133 /* utility functions */
1134 1134
1135/* 1135/*
1136 The following utility functions are implemented on top of the basic 1136 The following utility functions are implemented on top of the basic
1137 stream-oriented functions. To simplify the interface, some default options 1137 stream-oriented functions. To simplify the interface, some default options
1138 are assumed (compression level and memory usage, standard memory allocation 1138 are assumed (compression level and memory usage, standard memory allocation
1139 functions). The source code of these utility functions can be modified if 1139 functions). The source code of these utility functions can be modified if
1140 you need special options. 1140 you need special options.
1141*/ 1141*/
1142 1142
1143ZEXTERN int ZEXPORT compress OF((Bytef *dest, uLongf *destLen, 1143ZEXTERN int ZEXPORT compress OF((Bytef *dest, uLongf *destLen,
1144 const Bytef *source, uLong sourceLen)); 1144 const Bytef *source, uLong sourceLen));
1145/* 1145/*
1146 Compresses the source buffer into the destination buffer. sourceLen is 1146 Compresses the source buffer into the destination buffer. sourceLen is
1147 the byte length of the source buffer. Upon entry, destLen is the total size 1147 the byte length of the source buffer. Upon entry, destLen is the total size
1148 of the destination buffer, which must be at least the value returned by 1148 of the destination buffer, which must be at least the value returned by
1149 compressBound(sourceLen). Upon exit, destLen is the actual size of the 1149 compressBound(sourceLen). Upon exit, destLen is the actual size of the
1150 compressed buffer. 1150 compressed buffer.
1151 1151
1152 compress returns Z_OK if success, Z_MEM_ERROR if there was not 1152 compress returns Z_OK if success, Z_MEM_ERROR if there was not
1153 enough memory, Z_BUF_ERROR if there was not enough room in the output 1153 enough memory, Z_BUF_ERROR if there was not enough room in the output
1154 buffer. 1154 buffer.
1155*/ 1155*/
1156 1156
1157ZEXTERN int ZEXPORT compress2 OF((Bytef *dest, uLongf *destLen, 1157ZEXTERN int ZEXPORT compress2 OF((Bytef *dest, uLongf *destLen,
1158 const Bytef *source, uLong sourceLen, 1158 const Bytef *source, uLong sourceLen,
1159 int level)); 1159 int level));
1160/* 1160/*
1161 Compresses the source buffer into the destination buffer. The level 1161 Compresses the source buffer into the destination buffer. The level
1162 parameter has the same meaning as in deflateInit. sourceLen is the byte 1162 parameter has the same meaning as in deflateInit. sourceLen is the byte
1163 length of the source buffer. Upon entry, destLen is the total size of the 1163 length of the source buffer. Upon entry, destLen is the total size of the
1164 destination buffer, which must be at least the value returned by 1164 destination buffer, which must be at least the value returned by
1165 compressBound(sourceLen). Upon exit, destLen is the actual size of the 1165 compressBound(sourceLen). Upon exit, destLen is the actual size of the
1166 compressed buffer. 1166 compressed buffer.
1167 1167
1168 compress2 returns Z_OK if success, Z_MEM_ERROR if there was not enough 1168 compress2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
1169 memory, Z_BUF_ERROR if there was not enough room in the output buffer, 1169 memory, Z_BUF_ERROR if there was not enough room in the output buffer,
1170 Z_STREAM_ERROR if the level parameter is invalid. 1170 Z_STREAM_ERROR if the level parameter is invalid.
1171*/ 1171*/
1172 1172
1173ZEXTERN uLong ZEXPORT compressBound OF((uLong sourceLen)); 1173ZEXTERN uLong ZEXPORT compressBound OF((uLong sourceLen));
1174/* 1174/*
1175 compressBound() returns an upper bound on the compressed size after 1175 compressBound() returns an upper bound on the compressed size after
1176 compress() or compress2() on sourceLen bytes. It would be used before a 1176 compress() or compress2() on sourceLen bytes. It would be used before a
1177 compress() or compress2() call to allocate the destination buffer. 1177 compress() or compress2() call to allocate the destination buffer.
1178*/ 1178*/
1179 1179
1180ZEXTERN int ZEXPORT uncompress OF((Bytef *dest, uLongf *destLen, 1180ZEXTERN int ZEXPORT uncompress OF((Bytef *dest, uLongf *destLen,
1181 const Bytef *source, uLong sourceLen)); 1181 const Bytef *source, uLong sourceLen));
1182/* 1182/*
1183 Decompresses the source buffer into the destination buffer. sourceLen is 1183 Decompresses the source buffer into the destination buffer. sourceLen is
1184 the byte length of the source buffer. Upon entry, destLen is the total size 1184 the byte length of the source buffer. Upon entry, destLen is the total size
1185 of the destination buffer, which must be large enough to hold the entire 1185 of the destination buffer, which must be large enough to hold the entire
1186 uncompressed data. (The size of the uncompressed data must have been saved 1186 uncompressed data. (The size of the uncompressed data must have been saved
1187 previously by the compressor and transmitted to the decompressor by some 1187 previously by the compressor and transmitted to the decompressor by some
1188 mechanism outside the scope of this compression library.) Upon exit, destLen 1188 mechanism outside the scope of this compression library.) Upon exit, destLen
1189 is the actual size of the uncompressed buffer. 1189 is the actual size of the uncompressed buffer.
1190 1190
1191 uncompress returns Z_OK if success, Z_MEM_ERROR if there was not 1191 uncompress returns Z_OK if success, Z_MEM_ERROR if there was not
1192 enough memory, Z_BUF_ERROR if there was not enough room in the output 1192 enough memory, Z_BUF_ERROR if there was not enough room in the output
1193 buffer, or Z_DATA_ERROR if the input data was corrupted or incomplete. In 1193 buffer, or Z_DATA_ERROR if the input data was corrupted or incomplete. In
1194 the case where there is not enough room, uncompress() will fill the output 1194 the case where there is not enough room, uncompress() will fill the output
1195 buffer with the uncompressed data up to that point. 1195 buffer with the uncompressed data up to that point.
1196*/ 1196*/
1197 1197
1198 /* gzip file access functions */ 1198 /* gzip file access functions */
1199 1199
1200/* 1200/*
1201 This library supports reading and writing files in gzip (.gz) format with 1201 This library supports reading and writing files in gzip (.gz) format with
1202 an interface similar to that of stdio, using the functions that start with 1202 an interface similar to that of stdio, using the functions that start with
1203 "gz". The gzip format is different from the zlib format. gzip is a gzip 1203 "gz". The gzip format is different from the zlib format. gzip is a gzip
1204 wrapper, documented in RFC 1952, wrapped around a deflate stream. 1204 wrapper, documented in RFC 1952, wrapped around a deflate stream.
1205*/ 1205*/
1206 1206
1207typedef struct gzFile_s *gzFile; /* semi-opaque gzip file descriptor */ 1207typedef struct gzFile_s *gzFile; /* semi-opaque gzip file descriptor */
1208 1208
1209/* 1209/*
1210ZEXTERN gzFile ZEXPORT gzopen OF((const char *path, const char *mode)); 1210ZEXTERN gzFile ZEXPORT gzopen OF((const char *path, const char *mode));
1211 1211
1212 Opens a gzip (.gz) file for reading or writing. The mode parameter is as 1212 Opens a gzip (.gz) file for reading or writing. The mode parameter is as
1213 in fopen ("rb" or "wb") but can also include a compression level ("wb9") or 1213 in fopen ("rb" or "wb") but can also include a compression level ("wb9") or
1214 a strategy: 'f' for filtered data as in "wb6f", 'h' for Huffman-only 1214 a strategy: 'f' for filtered data as in "wb6f", 'h' for Huffman-only
1215 compression as in "wb1h", 'R' for run-length encoding as in "wb1R", or 'F' 1215 compression as in "wb1h", 'R' for run-length encoding as in "wb1R", or 'F'
1216 for fixed code compression as in "wb9F". (See the description of 1216 for fixed code compression as in "wb9F". (See the description of
1217 deflateInit2 for more information about the strategy parameter.) 'T' will 1217 deflateInit2 for more information about the strategy parameter.) 'T' will
1218 request transparent writing or appending with no compression and not using 1218 request transparent writing or appending with no compression and not using
1219 the gzip format. 1219 the gzip format.
1220 1220
1221 "a" can be used instead of "w" to request that the gzip stream that will 1221 "a" can be used instead of "w" to request that the gzip stream that will
1222 be written be appended to the file. "+" will result in an error, since 1222 be written be appended to the file. "+" will result in an error, since
1223 reading and writing to the same gzip file is not supported. The addition of 1223 reading and writing to the same gzip file is not supported. The addition of
1224 "x" when writing will create the file exclusively, which fails if the file 1224 "x" when writing will create the file exclusively, which fails if the file
1225 already exists. On systems that support it, the addition of "e" when 1225 already exists. On systems that support it, the addition of "e" when
1226 reading or writing will set the flag to close the file on an execve() call. 1226 reading or writing will set the flag to close the file on an execve() call.
1227 1227
1228 These functions, as well as gzip, will read and decode a sequence of gzip 1228 These functions, as well as gzip, will read and decode a sequence of gzip
1229 streams in a file. The append function of gzopen() can be used to create 1229 streams in a file. The append function of gzopen() can be used to create
1230 such a file. (Also see gzflush() for another way to do this.) When 1230 such a file. (Also see gzflush() for another way to do this.) When
1231 appending, gzopen does not test whether the file begins with a gzip stream, 1231 appending, gzopen does not test whether the file begins with a gzip stream,
1232 nor does it look for the end of the gzip streams to begin appending. gzopen 1232 nor does it look for the end of the gzip streams to begin appending. gzopen
1233 will simply append a gzip stream to the existing file. 1233 will simply append a gzip stream to the existing file.
1234 1234
1235 gzopen can be used to read a file which is not in gzip format; in this 1235 gzopen can be used to read a file which is not in gzip format; in this
1236 case gzread will directly read from the file without decompression. When 1236 case gzread will directly read from the file without decompression. When
1237 reading, this will be detected automatically by looking for the magic two- 1237 reading, this will be detected automatically by looking for the magic two-
1238 byte gzip header. 1238 byte gzip header.
1239 1239
1240 gzopen returns NULL if the file could not be opened, if there was 1240 gzopen returns NULL if the file could not be opened, if there was
1241 insufficient memory to allocate the gzFile state, or if an invalid mode was 1241 insufficient memory to allocate the gzFile state, or if an invalid mode was
1242 specified (an 'r', 'w', or 'a' was not provided, or '+' was provided). 1242 specified (an 'r', 'w', or 'a' was not provided, or '+' was provided).
1243 errno can be checked to determine if the reason gzopen failed was that the 1243 errno can be checked to determine if the reason gzopen failed was that the
1244 file could not be opened. 1244 file could not be opened.
1245*/ 1245*/
1246 1246
1247ZEXTERN gzFile ZEXPORT gzdopen OF((int fd, const char *mode)); 1247ZEXTERN gzFile ZEXPORT gzdopen OF((int fd, const char *mode));
1248/* 1248/*
1249 gzdopen associates a gzFile with the file descriptor fd. File descriptors 1249 gzdopen associates a gzFile with the file descriptor fd. File descriptors
1250 are obtained from calls like open, dup, creat, pipe or fileno (if the file 1250 are obtained from calls like open, dup, creat, pipe or fileno (if the file
1251 has been previously opened with fopen). The mode parameter is as in gzopen. 1251 has been previously opened with fopen). The mode parameter is as in gzopen.
1252 1252
1253 The next call of gzclose on the returned gzFile will also close the file 1253 The next call of gzclose on the returned gzFile will also close the file
1254 descriptor fd, just like fclose(fdopen(fd, mode)) closes the file descriptor 1254 descriptor fd, just like fclose(fdopen(fd, mode)) closes the file descriptor
1255 fd. If you want to keep fd open, use fd = dup(fd_keep); gz = gzdopen(fd, 1255 fd. If you want to keep fd open, use fd = dup(fd_keep); gz = gzdopen(fd,
1256 mode);. The duplicated descriptor should be saved to avoid a leak, since 1256 mode);. The duplicated descriptor should be saved to avoid a leak, since
1257 gzdopen does not close fd if it fails. If you are using fileno() to get the 1257 gzdopen does not close fd if it fails. If you are using fileno() to get the
1258 file descriptor from a FILE *, then you will have to use dup() to avoid 1258 file descriptor from a FILE *, then you will have to use dup() to avoid
1259 double-close()ing the file descriptor. Both gzclose() and fclose() will 1259 double-close()ing the file descriptor. Both gzclose() and fclose() will
1260 close the associated file descriptor, so they need to have different file 1260 close the associated file descriptor, so they need to have different file
1261 descriptors. 1261 descriptors.
1262 1262
1263 gzdopen returns NULL if there was insufficient memory to allocate the 1263 gzdopen returns NULL if there was insufficient memory to allocate the
1264 gzFile state, if an invalid mode was specified (an 'r', 'w', or 'a' was not 1264 gzFile state, if an invalid mode was specified (an 'r', 'w', or 'a' was not
1265 provided, or '+' was provided), or if fd is -1. The file descriptor is not 1265 provided, or '+' was provided), or if fd is -1. The file descriptor is not
1266 used until the next gz* read, write, seek, or close operation, so gzdopen 1266 used until the next gz* read, write, seek, or close operation, so gzdopen
1267 will not detect if fd is invalid (unless fd is -1). 1267 will not detect if fd is invalid (unless fd is -1).
1268*/ 1268*/
1269 1269
1270ZEXTERN int ZEXPORT gzbuffer OF((gzFile file, unsigned size)); 1270ZEXTERN int ZEXPORT gzbuffer OF((gzFile file, unsigned size));
1271/* 1271/*
1272 Set the internal buffer size used by this library's functions. The 1272 Set the internal buffer size used by this library's functions. The
1273 default buffer size is 8192 bytes. This function must be called after 1273 default buffer size is 8192 bytes. This function must be called after
1274 gzopen() or gzdopen(), and before any other calls that read or write the 1274 gzopen() or gzdopen(), and before any other calls that read or write the
1275 file. The buffer memory allocation is always deferred to the first read or 1275 file. The buffer memory allocation is always deferred to the first read or
1276 write. Two buffers are allocated, either both of the specified size when 1276 write. Two buffers are allocated, either both of the specified size when
1277 writing, or one of the specified size and the other twice that size when 1277 writing, or one of the specified size and the other twice that size when
1278 reading. A larger buffer size of, for example, 64K or 128K bytes will 1278 reading. A larger buffer size of, for example, 64K or 128K bytes will
1279 noticeably increase the speed of decompression (reading). 1279 noticeably increase the speed of decompression (reading).
1280 1280
1281 The new buffer size also affects the maximum length for gzprintf(). 1281 The new buffer size also affects the maximum length for gzprintf().
1282 1282
1283 gzbuffer() returns 0 on success, or -1 on failure, such as being called 1283 gzbuffer() returns 0 on success, or -1 on failure, such as being called
1284 too late. 1284 too late.
1285*/ 1285*/
1286 1286
1287ZEXTERN int ZEXPORT gzsetparams OF((gzFile file, int level, int strategy)); 1287ZEXTERN int ZEXPORT gzsetparams OF((gzFile file, int level, int strategy));
1288/* 1288/*
1289 Dynamically update the compression level or strategy. See the description 1289 Dynamically update the compression level or strategy. See the description
1290 of deflateInit2 for the meaning of these parameters. 1290 of deflateInit2 for the meaning of these parameters.
1291 1291
1292 gzsetparams returns Z_OK if success, or Z_STREAM_ERROR if the file was not 1292 gzsetparams returns Z_OK if success, or Z_STREAM_ERROR if the file was not
1293 opened for writing. 1293 opened for writing.
1294*/ 1294*/
1295 1295
1296ZEXTERN int ZEXPORT gzread OF((gzFile file, voidp buf, unsigned len)); 1296ZEXTERN int ZEXPORT gzread OF((gzFile file, voidp buf, unsigned len));
1297/* 1297/*
1298 Reads the given number of uncompressed bytes from the compressed file. If 1298 Reads the given number of uncompressed bytes from the compressed file. If
1299 the input file is not in gzip format, gzread copies the given number of 1299 the input file is not in gzip format, gzread copies the given number of
1300 bytes into the buffer directly from the file. 1300 bytes into the buffer directly from the file.
1301 1301
1302 After reaching the end of a gzip stream in the input, gzread will continue 1302 After reaching the end of a gzip stream in the input, gzread will continue
1303 to read, looking for another gzip stream. Any number of gzip streams may be 1303 to read, looking for another gzip stream. Any number of gzip streams may be
1304 concatenated in the input file, and will all be decompressed by gzread(). 1304 concatenated in the input file, and will all be decompressed by gzread().
1305 If something other than a gzip stream is encountered after a gzip stream, 1305 If something other than a gzip stream is encountered after a gzip stream,
1306 that remaining trailing garbage is ignored (and no error is returned). 1306 that remaining trailing garbage is ignored (and no error is returned).
1307 1307
1308 gzread can be used to read a gzip file that is being concurrently written. 1308 gzread can be used to read a gzip file that is being concurrently written.
1309 Upon reaching the end of the input, gzread will return with the available 1309 Upon reaching the end of the input, gzread will return with the available
1310 data. If the error code returned by gzerror is Z_OK or Z_BUF_ERROR, then 1310 data. If the error code returned by gzerror is Z_OK or Z_BUF_ERROR, then
1311 gzclearerr can be used to clear the end of file indicator in order to permit 1311 gzclearerr can be used to clear the end of file indicator in order to permit
1312 gzread to be tried again. Z_OK indicates that a gzip stream was completed 1312 gzread to be tried again. Z_OK indicates that a gzip stream was completed
1313 on the last gzread. Z_BUF_ERROR indicates that the input file ended in the 1313 on the last gzread. Z_BUF_ERROR indicates that the input file ended in the
1314 middle of a gzip stream. Note that gzread does not return -1 in the event 1314 middle of a gzip stream. Note that gzread does not return -1 in the event
1315 of an incomplete gzip stream. This error is deferred until gzclose(), which 1315 of an incomplete gzip stream. This error is deferred until gzclose(), which
1316 will return Z_BUF_ERROR if the last gzread ended in the middle of a gzip 1316 will return Z_BUF_ERROR if the last gzread ended in the middle of a gzip
1317 stream. Alternatively, gzerror can be used before gzclose to detect this 1317 stream. Alternatively, gzerror can be used before gzclose to detect this
1318 case. 1318 case.
1319 1319
1320 gzread returns the number of uncompressed bytes actually read, less than 1320 gzread returns the number of uncompressed bytes actually read, less than
1321 len for end of file, or -1 for error. 1321 len for end of file, or -1 for error.
1322*/ 1322*/
1323 1323
1324ZEXTERN int ZEXPORT gzwrite OF((gzFile file, 1324ZEXTERN int ZEXPORT gzwrite OF((gzFile file,
1325 voidpc buf, unsigned len)); 1325 voidpc buf, unsigned len));
1326/* 1326/*
1327 Writes the given number of uncompressed bytes into the compressed file. 1327 Writes the given number of uncompressed bytes into the compressed file.
1328 gzwrite returns the number of uncompressed bytes written or 0 in case of 1328 gzwrite returns the number of uncompressed bytes written or 0 in case of
1329 error. 1329 error.
1330*/ 1330*/
1331 1331
1332ZEXTERN int ZEXPORTVA gzprintf Z_ARG((gzFile file, const char *format, ...)); 1332ZEXTERN int ZEXPORTVA gzprintf Z_ARG((gzFile file, const char *format, ...));
1333/* 1333/*
1334 Converts, formats, and writes the arguments to the compressed file under 1334 Converts, formats, and writes the arguments to the compressed file under
1335 control of the format string, as in fprintf. gzprintf returns the number of 1335 control of the format string, as in fprintf. gzprintf returns the number of
1336 uncompressed bytes actually written, or 0 in case of error. The number of 1336 uncompressed bytes actually written, or 0 in case of error. The number of
1337 uncompressed bytes written is limited to 8191, or one less than the buffer 1337 uncompressed bytes written is limited to 8191, or one less than the buffer
1338 size given to gzbuffer(). The caller should assure that this limit is not 1338 size given to gzbuffer(). The caller should assure that this limit is not
1339 exceeded. If it is exceeded, then gzprintf() will return an error (0) with 1339 exceeded. If it is exceeded, then gzprintf() will return an error (0) with
1340 nothing written. In this case, there may also be a buffer overflow with 1340 nothing written. In this case, there may also be a buffer overflow with
1341 unpredictable consequences, which is possible only if zlib was compiled with 1341 unpredictable consequences, which is possible only if zlib was compiled with
1342 the insecure functions sprintf() or vsprintf() because the secure snprintf() 1342 the insecure functions sprintf() or vsprintf() because the secure snprintf()
1343 or vsnprintf() functions were not available. This can be determined using 1343 or vsnprintf() functions were not available. This can be determined using
1344 zlibCompileFlags(). 1344 zlibCompileFlags().
1345*/ 1345*/
1346 1346
1347ZEXTERN int ZEXPORT gzputs OF((gzFile file, const char *s)); 1347ZEXTERN int ZEXPORT gzputs OF((gzFile file, const char *s));
1348/* 1348/*
1349 Writes the given null-terminated string to the compressed file, excluding 1349 Writes the given null-terminated string to the compressed file, excluding
1350 the terminating null character. 1350 the terminating null character.
1351 1351
1352 gzputs returns the number of characters written, or -1 in case of error. 1352 gzputs returns the number of characters written, or -1 in case of error.
1353*/ 1353*/
1354 1354
1355ZEXTERN char * ZEXPORT gzgets OF((gzFile file, char *buf, int len)); 1355ZEXTERN char * ZEXPORT gzgets OF((gzFile file, char *buf, int len));
1356/* 1356/*
1357 Reads bytes from the compressed file until len-1 characters are read, or a 1357 Reads bytes from the compressed file until len-1 characters are read, or a
1358 newline character is read and transferred to buf, or an end-of-file 1358 newline character is read and transferred to buf, or an end-of-file
1359 condition is encountered. If any characters are read or if len == 1, the 1359 condition is encountered. If any characters are read or if len == 1, the
1360 string is terminated with a null character. If no characters are read due 1360 string is terminated with a null character. If no characters are read due
1361 to an end-of-file or len < 1, then the buffer is left untouched. 1361 to an end-of-file or len < 1, then the buffer is left untouched.
1362 1362
1363 gzgets returns buf which is a null-terminated string, or it returns NULL 1363 gzgets returns buf which is a null-terminated string, or it returns NULL
1364 for end-of-file or in case of error. If there was an error, the contents at 1364 for end-of-file or in case of error. If there was an error, the contents at
1365 buf are indeterminate. 1365 buf are indeterminate.
1366*/ 1366*/
1367 1367
1368ZEXTERN int ZEXPORT gzputc OF((gzFile file, int c)); 1368ZEXTERN int ZEXPORT gzputc OF((gzFile file, int c));
1369/* 1369/*
1370 Writes c, converted to an unsigned char, into the compressed file. gzputc 1370 Writes c, converted to an unsigned char, into the compressed file. gzputc
1371 returns the value that was written, or -1 in case of error. 1371 returns the value that was written, or -1 in case of error.
1372*/ 1372*/
1373 1373
1374ZEXTERN int ZEXPORT gzgetc OF((gzFile file)); 1374ZEXTERN int ZEXPORT gzgetc OF((gzFile file));
1375/* 1375/*
1376 Reads one byte from the compressed file. gzgetc returns this byte or -1 1376 Reads one byte from the compressed file. gzgetc returns this byte or -1
1377 in case of end of file or error. This is implemented as a macro for speed. 1377 in case of end of file or error. This is implemented as a macro for speed.
1378 As such, it does not do all of the checking the other functions do. I.e. 1378 As such, it does not do all of the checking the other functions do. I.e.
1379 it does not check to see if file is NULL, nor whether the structure file 1379 it does not check to see if file is NULL, nor whether the structure file
1380 points to has been clobbered or not. 1380 points to has been clobbered or not.
1381*/ 1381*/
1382 1382
1383ZEXTERN int ZEXPORT gzungetc OF((int c, gzFile file)); 1383ZEXTERN int ZEXPORT gzungetc OF((int c, gzFile file));
1384/* 1384/*
1385 Push one character back onto the stream to be read as the first character 1385 Push one character back onto the stream to be read as the first character
1386 on the next read. At least one character of push-back is allowed. 1386 on the next read. At least one character of push-back is allowed.
1387 gzungetc() returns the character pushed, or -1 on failure. gzungetc() will 1387 gzungetc() returns the character pushed, or -1 on failure. gzungetc() will
1388 fail if c is -1, and may fail if a character has been pushed but not read 1388 fail if c is -1, and may fail if a character has been pushed but not read
1389 yet. If gzungetc is used immediately after gzopen or gzdopen, at least the 1389 yet. If gzungetc is used immediately after gzopen or gzdopen, at least the
1390 output buffer size of pushed characters is allowed. (See gzbuffer above.) 1390 output buffer size of pushed characters is allowed. (See gzbuffer above.)
1391 The pushed character will be discarded if the stream is repositioned with 1391 The pushed character will be discarded if the stream is repositioned with
1392 gzseek() or gzrewind(). 1392 gzseek() or gzrewind().
1393*/ 1393*/
1394 1394
1395ZEXTERN int ZEXPORT gzflush OF((gzFile file, int flush)); 1395ZEXTERN int ZEXPORT gzflush OF((gzFile file, int flush));
1396/* 1396/*
1397 Flushes all pending output into the compressed file. The parameter flush 1397 Flushes all pending output into the compressed file. The parameter flush
1398 is as in the deflate() function. The return value is the zlib error number 1398 is as in the deflate() function. The return value is the zlib error number
1399 (see function gzerror below). gzflush is only permitted when writing. 1399 (see function gzerror below). gzflush is only permitted when writing.
1400 1400
1401 If the flush parameter is Z_FINISH, the remaining data is written and the 1401 If the flush parameter is Z_FINISH, the remaining data is written and the
1402 gzip stream is completed in the output. If gzwrite() is called again, a new 1402 gzip stream is completed in the output. If gzwrite() is called again, a new
1403 gzip stream will be started in the output. gzread() is able to read such 1403 gzip stream will be started in the output. gzread() is able to read such
1404 concatented gzip streams. 1404 concatented gzip streams.
1405 1405
1406 gzflush should be called only when strictly necessary because it will 1406 gzflush should be called only when strictly necessary because it will
1407 degrade compression if called too often. 1407 degrade compression if called too often.
1408*/ 1408*/
1409 1409
1410/* 1410/*
1411ZEXTERN z_off_t ZEXPORT gzseek OF((gzFile file, 1411ZEXTERN z_off_t ZEXPORT gzseek OF((gzFile file,
1412 z_off_t offset, int whence)); 1412 z_off_t offset, int whence));
1413 1413
1414 Sets the starting position for the next gzread or gzwrite on the given 1414 Sets the starting position for the next gzread or gzwrite on the given
1415 compressed file. The offset represents a number of bytes in the 1415 compressed file. The offset represents a number of bytes in the
1416 uncompressed data stream. The whence parameter is defined as in lseek(2); 1416 uncompressed data stream. The whence parameter is defined as in lseek(2);
1417 the value SEEK_END is not supported. 1417 the value SEEK_END is not supported.
1418 1418
1419 If the file is opened for reading, this function is emulated but can be 1419 If the file is opened for reading, this function is emulated but can be
1420 extremely slow. If the file is opened for writing, only forward seeks are 1420 extremely slow. If the file is opened for writing, only forward seeks are
1421 supported; gzseek then compresses a sequence of zeroes up to the new 1421 supported; gzseek then compresses a sequence of zeroes up to the new
1422 starting position. 1422 starting position.
1423 1423
1424 gzseek returns the resulting offset location as measured in bytes from 1424 gzseek returns the resulting offset location as measured in bytes from
1425 the beginning of the uncompressed stream, or -1 in case of error, in 1425 the beginning of the uncompressed stream, or -1 in case of error, in
1426 particular if the file is opened for writing and the new starting position 1426 particular if the file is opened for writing and the new starting position
1427 would be before the current position. 1427 would be before the current position.
1428*/ 1428*/
1429 1429
1430ZEXTERN int ZEXPORT gzrewind OF((gzFile file)); 1430ZEXTERN int ZEXPORT gzrewind OF((gzFile file));
1431/* 1431/*
1432 Rewinds the given file. This function is supported only for reading. 1432 Rewinds the given file. This function is supported only for reading.
1433 1433
1434 gzrewind(file) is equivalent to (int)gzseek(file, 0L, SEEK_SET) 1434 gzrewind(file) is equivalent to (int)gzseek(file, 0L, SEEK_SET)
1435*/ 1435*/
1436 1436
1437/* 1437/*
1438ZEXTERN z_off_t ZEXPORT gztell OF((gzFile file)); 1438ZEXTERN z_off_t ZEXPORT gztell OF((gzFile file));
1439 1439
1440 Returns the starting position for the next gzread or gzwrite on the given 1440 Returns the starting position for the next gzread or gzwrite on the given
1441 compressed file. This position represents a number of bytes in the 1441 compressed file. This position represents a number of bytes in the
1442 uncompressed data stream, and is zero when starting, even if appending or 1442 uncompressed data stream, and is zero when starting, even if appending or
1443 reading a gzip stream from the middle of a file using gzdopen(). 1443 reading a gzip stream from the middle of a file using gzdopen().
1444 1444
1445 gztell(file) is equivalent to gzseek(file, 0L, SEEK_CUR) 1445 gztell(file) is equivalent to gzseek(file, 0L, SEEK_CUR)
1446*/ 1446*/
1447 1447
1448/* 1448/*
1449ZEXTERN z_off_t ZEXPORT gzoffset OF((gzFile file)); 1449ZEXTERN z_off_t ZEXPORT gzoffset OF((gzFile file));
1450 1450
1451 Returns the current offset in the file being read or written. This offset 1451 Returns the current offset in the file being read or written. This offset
1452 includes the count of bytes that precede the gzip stream, for example when 1452 includes the count of bytes that precede the gzip stream, for example when
1453 appending or when using gzdopen() for reading. When reading, the offset 1453 appending or when using gzdopen() for reading. When reading, the offset
1454 does not include as yet unused buffered input. This information can be used 1454 does not include as yet unused buffered input. This information can be used
1455 for a progress indicator. On error, gzoffset() returns -1. 1455 for a progress indicator. On error, gzoffset() returns -1.
1456*/ 1456*/
1457 1457
1458ZEXTERN int ZEXPORT gzeof OF((gzFile file)); 1458ZEXTERN int ZEXPORT gzeof OF((gzFile file));
1459/* 1459/*
1460 Returns true (1) if the end-of-file indicator has been set while reading, 1460 Returns true (1) if the end-of-file indicator has been set while reading,
1461 false (0) otherwise. Note that the end-of-file indicator is set only if the 1461 false (0) otherwise. Note that the end-of-file indicator is set only if the
1462 read tried to go past the end of the input, but came up short. Therefore, 1462 read tried to go past the end of the input, but came up short. Therefore,
1463 just like feof(), gzeof() may return false even if there is no more data to 1463 just like feof(), gzeof() may return false even if there is no more data to
1464 read, in the event that the last read request was for the exact number of 1464 read, in the event that the last read request was for the exact number of
1465 bytes remaining in the input file. This will happen if the input file size 1465 bytes remaining in the input file. This will happen if the input file size
1466 is an exact multiple of the buffer size. 1466 is an exact multiple of the buffer size.
1467 1467
1468 If gzeof() returns true, then the read functions will return no more data, 1468 If gzeof() returns true, then the read functions will return no more data,
1469 unless the end-of-file indicator is reset by gzclearerr() and the input file 1469 unless the end-of-file indicator is reset by gzclearerr() and the input file
1470 has grown since the previous end of file was detected. 1470 has grown since the previous end of file was detected.
1471*/ 1471*/
1472 1472
1473ZEXTERN int ZEXPORT gzdirect OF((gzFile file)); 1473ZEXTERN int ZEXPORT gzdirect OF((gzFile file));
1474/* 1474/*
1475 Returns true (1) if file is being copied directly while reading, or false 1475 Returns true (1) if file is being copied directly while reading, or false
1476 (0) if file is a gzip stream being decompressed. 1476 (0) if file is a gzip stream being decompressed.
1477 1477
1478 If the input file is empty, gzdirect() will return true, since the input 1478 If the input file is empty, gzdirect() will return true, since the input
1479 does not contain a gzip stream. 1479 does not contain a gzip stream.
1480 1480
1481 If gzdirect() is used immediately after gzopen() or gzdopen() it will 1481 If gzdirect() is used immediately after gzopen() or gzdopen() it will
1482 cause buffers to be allocated to allow reading the file to determine if it 1482 cause buffers to be allocated to allow reading the file to determine if it
1483 is a gzip file. Therefore if gzbuffer() is used, it should be called before 1483 is a gzip file. Therefore if gzbuffer() is used, it should be called before
1484 gzdirect(). 1484 gzdirect().
1485 1485
1486 When writing, gzdirect() returns true (1) if transparent writing was 1486 When writing, gzdirect() returns true (1) if transparent writing was
1487 requested ("wT" for the gzopen() mode), or false (0) otherwise. (Note: 1487 requested ("wT" for the gzopen() mode), or false (0) otherwise. (Note:
1488 gzdirect() is not needed when writing. Transparent writing must be 1488 gzdirect() is not needed when writing. Transparent writing must be
1489 explicitly requested, so the application already knows the answer. When 1489 explicitly requested, so the application already knows the answer. When
1490 linking statically, using gzdirect() will include all of the zlib code for 1490 linking statically, using gzdirect() will include all of the zlib code for
1491 gzip file reading and decompression, which may not be desired.) 1491 gzip file reading and decompression, which may not be desired.)
1492*/ 1492*/
1493 1493
1494ZEXTERN int ZEXPORT gzclose OF((gzFile file)); 1494ZEXTERN int ZEXPORT gzclose OF((gzFile file));
1495/* 1495/*
1496 Flushes all pending output if necessary, closes the compressed file and 1496 Flushes all pending output if necessary, closes the compressed file and
1497 deallocates the (de)compression state. Note that once file is closed, you 1497 deallocates the (de)compression state. Note that once file is closed, you
1498 cannot call gzerror with file, since its structures have been deallocated. 1498 cannot call gzerror with file, since its structures have been deallocated.
1499 gzclose must not be called more than once on the same file, just as free 1499 gzclose must not be called more than once on the same file, just as free
1500 must not be called more than once on the same allocation. 1500 must not be called more than once on the same allocation.
1501 1501
1502 gzclose will return Z_STREAM_ERROR if file is not valid, Z_ERRNO on a 1502 gzclose will return Z_STREAM_ERROR if file is not valid, Z_ERRNO on a
1503 file operation error, Z_MEM_ERROR if out of memory, Z_BUF_ERROR if the 1503 file operation error, Z_MEM_ERROR if out of memory, Z_BUF_ERROR if the
1504 last read ended in the middle of a gzip stream, or Z_OK on success. 1504 last read ended in the middle of a gzip stream, or Z_OK on success.
1505*/ 1505*/
1506 1506
1507ZEXTERN int ZEXPORT gzclose_r OF((gzFile file)); 1507ZEXTERN int ZEXPORT gzclose_r OF((gzFile file));
1508ZEXTERN int ZEXPORT gzclose_w OF((gzFile file)); 1508ZEXTERN int ZEXPORT gzclose_w OF((gzFile file));
1509/* 1509/*
1510 Same as gzclose(), but gzclose_r() is only for use when reading, and 1510 Same as gzclose(), but gzclose_r() is only for use when reading, and
1511 gzclose_w() is only for use when writing or appending. The advantage to 1511 gzclose_w() is only for use when writing or appending. The advantage to
1512 using these instead of gzclose() is that they avoid linking in zlib 1512 using these instead of gzclose() is that they avoid linking in zlib
1513 compression or decompression code that is not used when only reading or only 1513 compression or decompression code that is not used when only reading or only
1514 writing respectively. If gzclose() is used, then both compression and 1514 writing respectively. If gzclose() is used, then both compression and
1515 decompression code will be included the application when linking to a static 1515 decompression code will be included the application when linking to a static
1516 zlib library. 1516 zlib library.
1517*/ 1517*/
1518 1518
1519ZEXTERN const char * ZEXPORT gzerror OF((gzFile file, int *errnum)); 1519ZEXTERN const char * ZEXPORT gzerror OF((gzFile file, int *errnum));
1520/* 1520/*
1521 Returns the error message for the last error which occurred on the given 1521 Returns the error message for the last error which occurred on the given
1522 compressed file. errnum is set to zlib error number. If an error occurred 1522 compressed file. errnum is set to zlib error number. If an error occurred
1523 in the file system and not in the compression library, errnum is set to 1523 in the file system and not in the compression library, errnum is set to
1524 Z_ERRNO and the application may consult errno to get the exact error code. 1524 Z_ERRNO and the application may consult errno to get the exact error code.
1525 1525
1526 The application must not modify the returned string. Future calls to 1526 The application must not modify the returned string. Future calls to
1527 this function may invalidate the previously returned string. If file is 1527 this function may invalidate the previously returned string. If file is
1528 closed, then the string previously returned by gzerror will no longer be 1528 closed, then the string previously returned by gzerror will no longer be
1529 available. 1529 available.
1530 1530
1531 gzerror() should be used to distinguish errors from end-of-file for those 1531 gzerror() should be used to distinguish errors from end-of-file for those
1532 functions above that do not distinguish those cases in their return values. 1532 functions above that do not distinguish those cases in their return values.
1533*/ 1533*/
1534 1534
1535ZEXTERN void ZEXPORT gzclearerr OF((gzFile file)); 1535ZEXTERN void ZEXPORT gzclearerr OF((gzFile file));
1536/* 1536/*
1537 Clears the error and end-of-file flags for file. This is analogous to the 1537 Clears the error and end-of-file flags for file. This is analogous to the
1538 clearerr() function in stdio. This is useful for continuing to read a gzip 1538 clearerr() function in stdio. This is useful for continuing to read a gzip
1539 file that is being written concurrently. 1539 file that is being written concurrently.
1540*/ 1540*/
1541 1541
1542#endif /* !Z_SOLO */ 1542#endif /* !Z_SOLO */
1543 1543
1544 /* checksum functions */ 1544 /* checksum functions */
1545 1545
1546/* 1546/*
1547 These functions are not related to compression but are exported 1547 These functions are not related to compression but are exported
1548 anyway because they might be useful in applications using the compression 1548 anyway because they might be useful in applications using the compression
1549 library. 1549 library.
1550*/ 1550*/
1551 1551
1552ZEXTERN uLong ZEXPORT adler32 OF((uLong adler, const Bytef *buf, uInt len)); 1552ZEXTERN uLong ZEXPORT adler32 OF((uLong adler, const Bytef *buf, uInt len));
1553/* 1553/*
1554 Update a running Adler-32 checksum with the bytes buf[0..len-1] and 1554 Update a running Adler-32 checksum with the bytes buf[0..len-1] and
1555 return the updated checksum. If buf is Z_NULL, this function returns the 1555 return the updated checksum. If buf is Z_NULL, this function returns the
1556 required initial value for the checksum. 1556 required initial value for the checksum.
1557 1557
1558 An Adler-32 checksum is almost as reliable as a CRC32 but can be computed 1558 An Adler-32 checksum is almost as reliable as a CRC32 but can be computed
1559 much faster. 1559 much faster.
1560 1560
1561 Usage example: 1561 Usage example:
1562 1562
1563 uLong adler = adler32(0L, Z_NULL, 0); 1563 uLong adler = adler32(0L, Z_NULL, 0);
1564 1564
1565 while (read_buffer(buffer, length) != EOF) { 1565 while (read_buffer(buffer, length) != EOF) {
1566 adler = adler32(adler, buffer, length); 1566 adler = adler32(adler, buffer, length);
1567 } 1567 }
1568 if (adler != original_adler) error(); 1568 if (adler != original_adler) error();
1569*/ 1569*/
1570 1570
1571/* 1571/*
1572ZEXTERN uLong ZEXPORT adler32_combine OF((uLong adler1, uLong adler2, 1572ZEXTERN uLong ZEXPORT adler32_combine OF((uLong adler1, uLong adler2,
1573 z_off_t len2)); 1573 z_off_t len2));
1574 1574
1575 Combine two Adler-32 checksums into one. For two sequences of bytes, seq1 1575 Combine two Adler-32 checksums into one. For two sequences of bytes, seq1
1576 and seq2 with lengths len1 and len2, Adler-32 checksums were calculated for 1576 and seq2 with lengths len1 and len2, Adler-32 checksums were calculated for
1577 each, adler1 and adler2. adler32_combine() returns the Adler-32 checksum of 1577 each, adler1 and adler2. adler32_combine() returns the Adler-32 checksum of
1578 seq1 and seq2 concatenated, requiring only adler1, adler2, and len2. Note 1578 seq1 and seq2 concatenated, requiring only adler1, adler2, and len2. Note
1579 that the z_off_t type (like off_t) is a signed integer. If len2 is 1579 that the z_off_t type (like off_t) is a signed integer. If len2 is
1580 negative, the result has no meaning or utility. 1580 negative, the result has no meaning or utility.
1581*/ 1581*/
1582 1582
1583ZEXTERN uLong ZEXPORT crc32 OF((uLong crc, const Bytef *buf, uInt len)); 1583ZEXTERN uLong ZEXPORT crc32 OF((uLong crc, const Bytef *buf, uInt len));
1584/* 1584/*
1585 Update a running CRC-32 with the bytes buf[0..len-1] and return the 1585 Update a running CRC-32 with the bytes buf[0..len-1] and return the
1586 updated CRC-32. If buf is Z_NULL, this function returns the required 1586 updated CRC-32. If buf is Z_NULL, this function returns the required
1587 initial value for the crc. Pre- and post-conditioning (one's complement) is 1587 initial value for the crc. Pre- and post-conditioning (one's complement) is
1588 performed within this function so it shouldn't be done by the application. 1588 performed within this function so it shouldn't be done by the application.
1589 1589
1590 Usage example: 1590 Usage example:
1591 1591
1592 uLong crc = crc32(0L, Z_NULL, 0); 1592 uLong crc = crc32(0L, Z_NULL, 0);
1593 1593
1594 while (read_buffer(buffer, length) != EOF) { 1594 while (read_buffer(buffer, length) != EOF) {
1595 crc = crc32(crc, buffer, length); 1595 crc = crc32(crc, buffer, length);
1596 } 1596 }
1597 if (crc != original_crc) error(); 1597 if (crc != original_crc) error();
1598*/ 1598*/
1599 1599
1600/* 1600/*
1601ZEXTERN uLong ZEXPORT crc32_combine OF((uLong crc1, uLong crc2, z_off_t len2)); 1601ZEXTERN uLong ZEXPORT crc32_combine OF((uLong crc1, uLong crc2, z_off_t len2));
1602 1602
1603 Combine two CRC-32 check values into one. For two sequences of bytes, 1603 Combine two CRC-32 check values into one. For two sequences of bytes,
1604 seq1 and seq2 with lengths len1 and len2, CRC-32 check values were 1604 seq1 and seq2 with lengths len1 and len2, CRC-32 check values were
1605 calculated for each, crc1 and crc2. crc32_combine() returns the CRC-32 1605 calculated for each, crc1 and crc2. crc32_combine() returns the CRC-32
1606 check value of seq1 and seq2 concatenated, requiring only crc1, crc2, and 1606 check value of seq1 and seq2 concatenated, requiring only crc1, crc2, and
1607 len2. 1607 len2.
1608*/ 1608*/
1609 1609
1610 1610
1611 /* various hacks, don't look :) */ 1611 /* various hacks, don't look :) */
1612 1612
1613/* deflateInit and inflateInit are macros to allow checking the zlib version 1613/* deflateInit and inflateInit are macros to allow checking the zlib version
1614 * and the compiler's view of z_stream: 1614 * and the compiler's view of z_stream:
1615 */ 1615 */
1616ZEXTERN int ZEXPORT deflateInit_ OF((z_streamp strm, int level, 1616ZEXTERN int ZEXPORT deflateInit_ OF((z_streamp strm, int level,
1617 const char *version, int stream_size)); 1617 const char *version, int stream_size));
1618ZEXTERN int ZEXPORT inflateInit_ OF((z_streamp strm, 1618ZEXTERN int ZEXPORT inflateInit_ OF((z_streamp strm,
1619 const char *version, int stream_size)); 1619 const char *version, int stream_size));
1620ZEXTERN int ZEXPORT deflateInit2_ OF((z_streamp strm, int level, int method, 1620ZEXTERN int ZEXPORT deflateInit2_ OF((z_streamp strm, int level, int method,
1621 int windowBits, int memLevel, 1621 int windowBits, int memLevel,
1622 int strategy, const char *version, 1622 int strategy, const char *version,
1623 int stream_size)); 1623 int stream_size));
1624ZEXTERN int ZEXPORT inflateInit2_ OF((z_streamp strm, int windowBits, 1624ZEXTERN int ZEXPORT inflateInit2_ OF((z_streamp strm, int windowBits,
1625 const char *version, int stream_size)); 1625 const char *version, int stream_size));
1626ZEXTERN int ZEXPORT inflateBackInit_ OF((z_streamp strm, int windowBits, 1626ZEXTERN int ZEXPORT inflateBackInit_ OF((z_streamp strm, int windowBits,
1627 unsigned char FAR *window, 1627 unsigned char FAR *window,
1628 const char *version, 1628 const char *version,
1629 int stream_size)); 1629 int stream_size));
1630#define deflateInit(strm, level) \ 1630#define deflateInit(strm, level) \
1631 deflateInit_((strm), (level), ZLIB_VERSION, (int)sizeof(z_stream)) 1631 deflateInit_((strm), (level), ZLIB_VERSION, (int)sizeof(z_stream))
1632#define inflateInit(strm) \ 1632#define inflateInit(strm) \
1633 inflateInit_((strm), ZLIB_VERSION, (int)sizeof(z_stream)) 1633 inflateInit_((strm), ZLIB_VERSION, (int)sizeof(z_stream))
1634#define deflateInit2(strm, level, method, windowBits, memLevel, strategy) \ 1634#define deflateInit2(strm, level, method, windowBits, memLevel, strategy) \
1635 deflateInit2_((strm),(level),(method),(windowBits),(memLevel),\ 1635 deflateInit2_((strm),(level),(method),(windowBits),(memLevel),\
1636 (strategy), ZLIB_VERSION, (int)sizeof(z_stream)) 1636 (strategy), ZLIB_VERSION, (int)sizeof(z_stream))
1637#define inflateInit2(strm, windowBits) \ 1637#define inflateInit2(strm, windowBits) \
1638 inflateInit2_((strm), (windowBits), ZLIB_VERSION, \ 1638 inflateInit2_((strm), (windowBits), ZLIB_VERSION, \
1639 (int)sizeof(z_stream)) 1639 (int)sizeof(z_stream))
1640#define inflateBackInit(strm, windowBits, window) \ 1640#define inflateBackInit(strm, windowBits, window) \
1641 inflateBackInit_((strm), (windowBits), (window), \ 1641 inflateBackInit_((strm), (windowBits), (window), \
1642 ZLIB_VERSION, (int)sizeof(z_stream)) 1642 ZLIB_VERSION, (int)sizeof(z_stream))
1643 1643
1644#ifndef Z_SOLO 1644#ifndef Z_SOLO
1645 1645
1646/* gzgetc() macro and its supporting function and exposed data structure. Note 1646/* gzgetc() macro and its supporting function and exposed data structure. Note
1647 * that the real internal state is much larger than the exposed structure. 1647 * that the real internal state is much larger than the exposed structure.
1648 * This abbreviated structure exposes just enough for the gzgetc() macro. The 1648 * This abbreviated structure exposes just enough for the gzgetc() macro. The
1649 * user should not mess with these exposed elements, since their names or 1649 * user should not mess with these exposed elements, since their names or
1650 * behavior could change in the future, perhaps even capriciously. They can 1650 * behavior could change in the future, perhaps even capriciously. They can
1651 * only be used by the gzgetc() macro. You have been warned. 1651 * only be used by the gzgetc() macro. You have been warned.
1652 */ 1652 */
1653struct gzFile_s { 1653struct gzFile_s {
1654 unsigned have; 1654 unsigned have;
1655 unsigned char *next; 1655 unsigned char *next;
1656 z_off64_t pos; 1656 z_off64_t pos;
1657}; 1657};
1658ZEXTERN int ZEXPORT gzgetc_ OF((gzFile file)); /* backward compatibility */ 1658ZEXTERN int ZEXPORT gzgetc_ OF((gzFile file)); /* backward compatibility */
1659#ifdef Z_PREFIX_SET 1659#ifdef Z_PREFIX_SET
1660# undef z_gzgetc 1660# undef z_gzgetc
1661# define z_gzgetc(g) \ 1661# define z_gzgetc(g) \
1662 ((g)->have ? ((g)->have--, (g)->pos++, *((g)->next)++) : gzgetc(g)) 1662 ((g)->have ? ((g)->have--, (g)->pos++, *((g)->next)++) : gzgetc(g))
1663#else 1663#else
1664# define gzgetc(g) \ 1664# define gzgetc(g) \
1665 ((g)->have ? ((g)->have--, (g)->pos++, *((g)->next)++) : gzgetc(g)) 1665 ((g)->have ? ((g)->have--, (g)->pos++, *((g)->next)++) : gzgetc(g))
1666#endif 1666#endif
1667 1667
1668/* provide 64-bit offset functions if _LARGEFILE64_SOURCE defined, and/or 1668/* provide 64-bit offset functions if _LARGEFILE64_SOURCE defined, and/or
1669 * change the regular functions to 64 bits if _FILE_OFFSET_BITS is 64 (if 1669 * change the regular functions to 64 bits if _FILE_OFFSET_BITS is 64 (if
1670 * both are true, the application gets the *64 functions, and the regular 1670 * both are true, the application gets the *64 functions, and the regular
1671 * functions are changed to 64 bits) -- in case these are set on systems 1671 * functions are changed to 64 bits) -- in case these are set on systems
1672 * without large file support, _LFS64_LARGEFILE must also be true 1672 * without large file support, _LFS64_LARGEFILE must also be true
1673 */ 1673 */
1674#ifdef Z_LARGE64 1674#ifdef Z_LARGE64
1675 ZEXTERN gzFile ZEXPORT gzopen64 OF((const char *, const char *)); 1675 ZEXTERN gzFile ZEXPORT gzopen64 OF((const char *, const char *));
1676 ZEXTERN z_off64_t ZEXPORT gzseek64 OF((gzFile, z_off64_t, int)); 1676 ZEXTERN z_off64_t ZEXPORT gzseek64 OF((gzFile, z_off64_t, int));
1677 ZEXTERN z_off64_t ZEXPORT gztell64 OF((gzFile)); 1677 ZEXTERN z_off64_t ZEXPORT gztell64 OF((gzFile));
1678 ZEXTERN z_off64_t ZEXPORT gzoffset64 OF((gzFile)); 1678 ZEXTERN z_off64_t ZEXPORT gzoffset64 OF((gzFile));
1679 ZEXTERN uLong ZEXPORT adler32_combine64 OF((uLong, uLong, z_off64_t)); 1679 ZEXTERN uLong ZEXPORT adler32_combine64 OF((uLong, uLong, z_off64_t));
1680 ZEXTERN uLong ZEXPORT crc32_combine64 OF((uLong, uLong, z_off64_t)); 1680 ZEXTERN uLong ZEXPORT crc32_combine64 OF((uLong, uLong, z_off64_t));
1681#endif 1681#endif
1682 1682
1683#if !defined(ZLIB_INTERNAL) && defined(Z_WANT64) 1683#if !defined(ZLIB_INTERNAL) && defined(Z_WANT64)
1684# ifdef Z_PREFIX_SET 1684# ifdef Z_PREFIX_SET
1685# define z_gzopen z_gzopen64 1685# define z_gzopen z_gzopen64
1686# define z_gzseek z_gzseek64 1686# define z_gzseek z_gzseek64
1687# define z_gztell z_gztell64 1687# define z_gztell z_gztell64
1688# define z_gzoffset z_gzoffset64 1688# define z_gzoffset z_gzoffset64
1689# define z_adler32_combine z_adler32_combine64 1689# define z_adler32_combine z_adler32_combine64
1690# define z_crc32_combine z_crc32_combine64 1690# define z_crc32_combine z_crc32_combine64
1691# else 1691# else
1692# define gzopen gzopen64 1692# define gzopen gzopen64
1693# define gzseek gzseek64 1693# define gzseek gzseek64
1694# define gztell gztell64 1694# define gztell gztell64
1695# define gzoffset gzoffset64 1695# define gzoffset gzoffset64
1696# define adler32_combine adler32_combine64 1696# define adler32_combine adler32_combine64
1697# define crc32_combine crc32_combine64 1697# define crc32_combine crc32_combine64
1698# endif 1698# endif
1699# ifndef Z_LARGE64 1699# ifndef Z_LARGE64
1700 ZEXTERN gzFile ZEXPORT gzopen64 OF((const char *, const char *)); 1700 ZEXTERN gzFile ZEXPORT gzopen64 OF((const char *, const char *));
1701 ZEXTERN z_off_t ZEXPORT gzseek64 OF((gzFile, z_off_t, int)); 1701 ZEXTERN z_off_t ZEXPORT gzseek64 OF((gzFile, z_off_t, int));
1702 ZEXTERN z_off_t ZEXPORT gztell64 OF((gzFile)); 1702 ZEXTERN z_off_t ZEXPORT gztell64 OF((gzFile));
1703 ZEXTERN z_off_t ZEXPORT gzoffset64 OF((gzFile)); 1703 ZEXTERN z_off_t ZEXPORT gzoffset64 OF((gzFile));
1704 ZEXTERN uLong ZEXPORT adler32_combine64 OF((uLong, uLong, z_off_t)); 1704 ZEXTERN uLong ZEXPORT adler32_combine64 OF((uLong, uLong, z_off_t));
1705 ZEXTERN uLong ZEXPORT crc32_combine64 OF((uLong, uLong, z_off_t)); 1705 ZEXTERN uLong ZEXPORT crc32_combine64 OF((uLong, uLong, z_off_t));
1706# endif 1706# endif
1707#else 1707#else
1708 ZEXTERN gzFile ZEXPORT gzopen OF((const char *, const char *)); 1708 ZEXTERN gzFile ZEXPORT gzopen OF((const char *, const char *));
1709 ZEXTERN z_off_t ZEXPORT gzseek OF((gzFile, z_off_t, int)); 1709 ZEXTERN z_off_t ZEXPORT gzseek OF((gzFile, z_off_t, int));
1710 ZEXTERN z_off_t ZEXPORT gztell OF((gzFile)); 1710 ZEXTERN z_off_t ZEXPORT gztell OF((gzFile));
1711 ZEXTERN z_off_t ZEXPORT gzoffset OF((gzFile)); 1711 ZEXTERN z_off_t ZEXPORT gzoffset OF((gzFile));
1712 ZEXTERN uLong ZEXPORT adler32_combine OF((uLong, uLong, z_off_t)); 1712 ZEXTERN uLong ZEXPORT adler32_combine OF((uLong, uLong, z_off_t));
1713 ZEXTERN uLong ZEXPORT crc32_combine OF((uLong, uLong, z_off_t)); 1713 ZEXTERN uLong ZEXPORT crc32_combine OF((uLong, uLong, z_off_t));
1714#endif 1714#endif
1715 1715
1716#else /* Z_SOLO */ 1716#else /* Z_SOLO */
1717 1717
1718 ZEXTERN uLong ZEXPORT adler32_combine OF((uLong, uLong, z_off_t)); 1718 ZEXTERN uLong ZEXPORT adler32_combine OF((uLong, uLong, z_off_t));
1719 ZEXTERN uLong ZEXPORT crc32_combine OF((uLong, uLong, z_off_t)); 1719 ZEXTERN uLong ZEXPORT crc32_combine OF((uLong, uLong, z_off_t));
1720 1720
1721#endif /* !Z_SOLO */ 1721#endif /* !Z_SOLO */
1722 1722
1723/* hack for buggy compilers */ 1723/* hack for buggy compilers */
1724#if !defined(ZUTIL_H) && !defined(NO_DUMMY_DECL) 1724#if !defined(ZUTIL_H) && !defined(NO_DUMMY_DECL)
1725 struct internal_state {int dummy;}; 1725 struct internal_state {int dummy;};
1726#endif 1726#endif
1727 1727
1728/* undocumented functions */ 1728/* undocumented functions */
1729ZEXTERN const char * ZEXPORT zError OF((int)); 1729ZEXTERN const char * ZEXPORT zError OF((int));
1730ZEXTERN int ZEXPORT inflateSyncPoint OF((z_streamp)); 1730ZEXTERN int ZEXPORT inflateSyncPoint OF((z_streamp));
1731ZEXTERN const z_crc_t FAR * ZEXPORT get_crc_table OF((void)); 1731ZEXTERN const z_crc_t FAR * ZEXPORT get_crc_table OF((void));
1732ZEXTERN int ZEXPORT inflateUndermine OF((z_streamp, int)); 1732ZEXTERN int ZEXPORT inflateUndermine OF((z_streamp, int));
1733ZEXTERN int ZEXPORT inflateResetKeep OF((z_streamp)); 1733ZEXTERN int ZEXPORT inflateResetKeep OF((z_streamp));
1734ZEXTERN int ZEXPORT deflateResetKeep OF((z_streamp)); 1734ZEXTERN int ZEXPORT deflateResetKeep OF((z_streamp));
1735#if defined(_WIN32) && !defined(Z_SOLO) 1735#if defined(_WIN32) && !defined(Z_SOLO)
1736ZEXTERN gzFile ZEXPORT gzopen_w OF((const wchar_t *path, 1736ZEXTERN gzFile ZEXPORT gzopen_w OF((const wchar_t *path,
1737 const char *mode)); 1737 const char *mode));
1738#endif 1738#endif
1739 1739
1740#ifdef __cplusplus 1740#ifdef __cplusplus
1741} 1741}
1742#endif 1742#endif
1743 1743
1744#endif /* ZLIB_H */ 1744#endif /* ZLIB_H */