1 files changed, 75 insertions, 187 deletions

diff --git a/aataaj.lua b/aataaj.lua
index 761163e..a92e0fb 100755
--- a/aataaj.lua
+++ b/aataaj.lua
@@ -14,6 +14,17 @@
 ### END INIT INFO
 ]]
 
+local _ = require '_'
+local D = _.D
+local I = _.I
+local T = _.T
+local W = _.W
+local E = _.E
+local C = _.C
+local __ = _._
+
+
+
 local Help = [[
 This is part of the AllAudioToALSAandJACK project, aataaj for short,
 pronounced like "attach".
@@ -40,14 +51,12 @@ The packages you need installed are -
 
 You need to have the snd-aloop kernel module loaded.
 
-The aataaj.lua script should be run at boot time, put it into
+The aataaj.lua script should be run at boot time, put it and _.lua into
 /etc/init.d/ and activate it with -
 
 update-rc.d aataaj.lua defaults
 
-It scans for your sound devices and creates /var/lib/aataaj/asoundrc. 
-You can run it manually with "aataaj start" each time you need to change
-your devices.
+Note that _.lua might need to be in /usr/local/share/lua/5.1/
 
 
 
@@ -83,131 +92,6 @@ NOTE - Seems both ALSA and JACK are per user.  So you need to run
 
 
 
--- Most of this APT stuff was copied from apt-panopticon.
-local APT = {}
-
-APT.readCmd = function(cmd)
-    local result = {}
-    local output = io.popen(cmd)
-    if nil ~= output then
-        for l in output:lines() do
-            table.insert(result, l)
-        end
-    end
-    -- While this does return the same things as os.execute(), it's just as useless.
-    output:close()
-    return result
-end
-
-APT.exe = function(c)
-    local exe = {status = 0, lines = {}, log = true, cmd = c .. ' ', command = c}
-
-    function exe:log()
-        self.log = true
-        return self
-    end
-    function exe:Nice(c)
-        if nil == c then
-            self.cmd = 'ionice -c3 nice -n 19 ' .. self.cmd
-        else
-            self.cmd = self.cmd .. 'ionice -c3 nice -n 19 ' .. c .. ' '
-        end
-        return self
-    end
-    function exe:timeout(c)
-        -- timeout returns a status of - command status if --preserve-status; "128+9" (actually 137) if --kill-after ends up being done; 124 if it had to TERM; command status if all went well.
-        -- --kill-after means "send KILL after TERM fails.
-        if nil == c then
-            self.cmd = 'timeout --kill-after=10.0 --foreground 42.0s ' .. self.cmd
-        else
-            self.cmd = 'timeout --kill-after=10.0 --foreground ' .. c .. ' ' .. self.cmd
-        end
-        return self
-    end
-    function exe:also(c)
-        if nil == c then c = '' else c = ' ' .. c end
-        self.cmd = self.cmd .. ';' .. c .. ' '
-        return self
-    end
-    function exe:And(c)
-        if nil == c then c = '' else c = ' ' .. c end
-        self.cmd = self.cmd .. '&&' .. c .. ' '
-        return self
-    end
-    function exe:Or(c)
-        if nil == c then c = '' end
-        self.cmd = self.cmd .. '|| ' .. c .. ' '
-        return self
-    end
-    function exe:noErr()
-        self.cmd = self.cmd .. '2>/dev/null '
-        return self
-    end
-    function exe:wait(w)
-        self.cmd = self.cmd .. '&& touch ' .. w .. ' '
-        return self
-    end
-    function exe:Do()
-    --[[    "The condition expression of a control structure can return any
-            value. Both false and nil are considered false. All values different
-            from nil and false are considered true (in particular, the number 0
-            and the empty string are also true)."
-        says the docs, I beg to differ.]]
-        if true == self.log then D("  executing - &nbsp; <code>" .. self.cmd .. "</code>") end
-        --[[ Damn os.execute()
-            Lua 5.1 says it returns "a status code, which is system-dependent"
-            Lua 5.2 says it returns true/nil, "exit"/"signal", the status code.
-            I'm getting 7168 or 0.  No idea what the fuck that is.
-        local ok, rslt, status = os.execute(s)
-        ]]
-        self.lines = APT.readCmd(self.cmd .. '; echo "$?"', 'r')
-        -- The last line will be the command's returned status, collect everything else in result.
-        self.status = tonumber(self.lines[#self.lines])
-        self.lines[#self.lines] = nil
---      self.result = '\n'
---      for i,l in ipairs(self.lines) do
---          self.result = self.result .. l .. "\n"
---      end
-        if (137 == self.status) or (124 == self.status) then
-            print("timeout killed " .. self.status .. ' ' .. self.command)
-            print('ERROR ' .. "timeout killed " .. self.status .. ' ' .. self.command)
-        elseif (nil == self.status) then
-            print("STATUS |" .. "NIL" .. '| ' .. self.command)
-        elseif (0 ~= self.status) then
-            print("STATUS |" .. self.status .. '| ' .. self.command)
-        end
-        return self
-    end
-    function exe:fork(host)
-        if nil ~= host then self.cmd = self.cmd .. ';  r=$?; if [ $r -ge 124 ]; then echo "$r ' .. host .. ' failed forked command ' .. string.gsub(self.cmd, '"', "'") .. '"; fi' end
-        self.cmd = '{ ' .. self.cmd .. '; } &'
-        if true == self.log then D("  forking - &nbsp; <code>" .. self.cmd .. "</code>") end
-        os.execute(self.cmd)
-        return self
-    end
-    return exe
-end
-
-APT.exists = function(c)
-    if 0 == APT.exe('which ' .. c):Do().status then return true end
-    return false
-end
-
-APT.killEmAll = function(all)
-    for i,l in ipairs(all) do
-        local c = 0
-        while 0 ~= tonumber(APT.exe("pgrep -u $USER -xc " .. l):Do().lines[1]) do
-            local s = 'TERM'
-            if c > 1 then s = 'KILL'; APT.exe("sleep " .. c):Do() end
-            print(  "pkill -" .. s .. " -u $USER -x " .. l)
-            APT.exe("pkill -" .. s .. " -u $USER -x " .. l):Do()
-            c = c + 1
-        end
-    end
-end
-
-
-
 local args = {...}
 if 0 ~= #args then
 --    for i,a in pairs(args) do
@@ -216,23 +100,27 @@ if 0 ~= #args then
 
     if     'start'        == args[1] then
     elseif 'stop'         == args[1] then
-        APT.killEmAll{'qsynth'}
-        APT.exe("a2j_control --stop"):Do()
-        APT.exe("sleep 2"):Do()
-        APT.exe("a2j_control --exit"):Do()
-        APT.exe("sleep 2"):Do()
-        APT.killEmAll{'alsa_in', 'alsa_out', 'zita-a2j', 'zita-j2a',  'aseqjoy', 'jack-plumbing'}
-        APT.exe("sleep 2"):Do()
-        APT.exe("jack_control stop"):Do()
-        APT.exe("sleep 2"):Do()
-        APT.exe("jack_control exit"):Do()
-        APT.exe("sleep 2"):Do()
-        APT.killEmAll{'jmcore', 'qjackctl'}
+        _.killEmAll{'qsynth'}
+        __[[
+            a2j_control --stop
+            sleep 2
+            a2j_control --exit
+            sleep 2
+]]:Do()
+        _.killEmAll{'alsa_in', 'alsa_out', 'zita-a2j', 'zita-j2a',  'aseqjoy', 'jack-plumbing'}
+        __[[
+            sleep 2
+            jack_control stop
+            sleep 2
+            jack_control exit
+            sleep 2
+]]:Do()
+        _.killEmAll{'jmcore', 'qjackctl'}
         -- Catia is python, and no easy way to kill it.
         -- Also it keeps jackdbus alive, no matter how hard you kill it.
-        APT.exe("pkill -TERM -u $USER -f catia"):Do()
-        APT.exe("sleep 2"):Do()
-        APT.killEmAll{'jackdbus', 'a2jmidid'}
+        __("pkill -TERM -u $USER -f catia"):Do()
+        __("sleep 2"):Do()
+        _.killEmAll{'jackdbus', 'a2jmidid'}
         return(0)
     elseif 'JACK'         == args[1] then
     elseif 'restart'      == args[1] then args[1] = 'start'
@@ -261,31 +149,31 @@ end
 local asoundrcPath = '/var/lib/aataaj'
 local asoundrc = 'asoundrc'
 local GUI = 'qjackctl'
-if APT.exists('catia') then GUI = 'catia' end
+if _.exists('catia') then GUI = 'catia' end
 local alias = {
 --      {name='Screen', dev='HDMI9'},
     }
 
 local speaker = 'espeak'
-if APT.exists('espeak-ng') then speaker = 'espeak-ng' end
+if _.exists('espeak-ng') then speaker = 'espeak-ng' end
 
 local Cards = {}
 
 print('Scanning for audio devices.')
-local cards = APT.exe('ls -d1 /proc/asound/card[0-9]*'):noErr():Do()
+local cards = __('ls -d1 /proc/asound/card[0-9]*'):noErr():Do()
 for  i,l in ipairs(cards.lines) do
     local f, e = io.open(l .. '/id', "r")
     if nil == f then print("Could not open " .. l .. '/id') else
         Cards[l] = {path = l, name = f:read("*a"):sub(1, -2), devs = {}, captureDevs = {}, playbackDevs = {}}
         if "Loopback" ~= Cards[l]['name'] then
-            Cards[l]['capture'] = APT.exe('ls -d1 ' .. l .. '/pcm[0-9]*c*'):noErr():Do()
+            Cards[l]['capture'] = __('ls -d1 ' .. l .. '/pcm[0-9]*c*'):noErr():Do()
             for  j,c in ipairs(Cards[l]['capture'].lines) do
                 local n = c:match(".*pcm(%d+).*")
                 Cards[l]['captureDevs'][j] = n
                 Cards[l]['devs'][n] = n
                 print("\tFound capture device: " .. Cards[l]['name'] .. "\tDEVICE: " .. Cards[l]['captureDevs'][j] .. ' ' .. n)
             end
-            Cards[l]['playback'] = APT.exe('ls -d1 ' .. l .. '/pcm[0-9]*p*'):noErr():Do()
+            Cards[l]['playback'] = __('ls -d1 ' .. l .. '/pcm[0-9]*p*'):noErr():Do()
             for  j,p in ipairs(Cards[l]['playback'].lines) do
                 local n = p:match(".*pcm(%d+).*")
                 Cards[l]['playbackDevs'][j] = n
@@ -293,8 +181,8 @@ for  i,l in ipairs(cards.lines) do
                 print("\tFound playback device " .. i - 1 .. " : " .. Cards[l]['name'] .. "\tDEVICE: " .. Cards[l]['playbackDevs'][j] .. ' ' .. n)
                 if 'JACK' ~= args[1] then
                     print('\t\tALSA_CARD=' .. i - 1 .. ' ' .. speaker .. ' "Found playback device ' .. i - 1 .. ' : ' .. Cards[l]['name'] .. ' DEVICE: ' .. Cards[l]['playbackDevs'][j] .. ' ' .. n .. '"')
-                    APT.exe('ALSA_CARD=' .. i - 1  .. ' ' .. speaker .. ' "Found playback device ' .. i - 1 .. ' : ' .. Cards[l]['name'] .. ' DEVICE: ' .. Cards[l]['playbackDevs'][j] .. ' ' .. n .. '"'):noErr():Do()
-                    APT.exe('sleep 1')
+                    __('ALSA_CARD=' .. i - 1  .. ' ' .. speaker .. ' "Found playback device ' .. i - 1 .. ' : ' .. Cards[l]['name'] .. ' DEVICE: ' .. Cards[l]['playbackDevs'][j] .. ' ' .. n .. '"'):noErr():Do()
+                    __('sleep 1'):Do()
                 end
             end
         end
@@ -302,7 +190,7 @@ for  i,l in ipairs(cards.lines) do
 end
 
 if 'start' == args[1] then
-    APT.exe('mkdir -p ' .. asoundrcPath):Do()
+    __('mkdir -p ' .. asoundrcPath):Do()
     local a, e = io.open(asoundrcPath .. '/jack-plumbing', "w")
     if nil == a then print("Could not open " .. asoundrcPath .. '/jack-plumbing') else
         a:write([[
@@ -475,58 +363,58 @@ elseif 'JACK' == args[1] then
     print('')
     print("Start up JACK and friends.")
     print("jack_control")
-    APT.exe('jack_control start'):Do()
-    APT.exe('jack_control ds alsa'):Do()
+    __('jack_control start'):Do()
+    __('jack_control ds alsa'):Do()
     --jack_control dps device hw:RIG,0
-    local r = APT.exe('jack_control status'):Do().status
+    local r = __('jack_control status'):Do().status
     while r ~= 0 do
         print("Waiting for JACK - sleep 1")
-        APT.exe('sleep 1'):Do()
-        r = APT.exe('jack_control status'):Do().status
+        __('sleep 1'):Do()
+        r = __('jack_control status'):Do().status
     end
     if nil ~= GUI then
         print(GUI)
-        APT.exe(GUI):fork()
+        __(GUI):fork()
     end
-    if APT.exists('jack-plumbing') then
+    if _.exists('jack-plumbing') then
         print("jack-plumbing")
-        APT.exe('jack-plumbing -o /var/lib/aataaj/jack-plumbing 2>/dev/null'):fork()
+        __('jack-plumbing -o /var/lib/aataaj/jack-plumbing 2>/dev/null'):fork()
     end
-    if APT.exists('a2j_control') then
+    if _.exists('a2j_control') then
         -- Bridge ALSA ports to JACK ports.  Only handles MIDI.
         -- MIDI via a2jmidid.  The --ehw enables hardware ports as well, equal to using the seq MIDI drivare according to https://freeshell.de/~murks/posts/ALSA_and_JACK_MIDI_explained_(by_a_dummy_for_dummies)/
         --a2j_control actually starts a2jmidid.
         ----a2jmidid -e -u &
         -- I think the jack_control start and my current alsa config means a2jmidid gets started anyway.  But seem to need this bit to get the joystick covered.
         print("a2j_control")
-        APT.exe('a2j_control --ehw && a2j_control --start'):Do()
+        __('a2j_control --ehw && a2j_control --start'):Do()
 --      print("sleep 2")
---      APT.exe('sleep 2'):Do()
+--      __('sleep 2'):Do()
         print("")
     end
 
 
     local AIN = "alsa_in"
-    if APT.exists('zita-a2j') then AIN = 'zita-a2j' end
+    if _.exists('zita-a2j') then AIN = 'zita-a2j' end
     local AOUT = "alsa_out"
-    if APT.exists('zita-j2a') then AOUT = 'zita-j2a' end
+    if _.exists('zita-j2a') then AOUT = 'zita-j2a' end
 
     print("Basic ALSA sound devices converted to JACK.")
     for  i,C in pairs(alias) do
         print('HW playback: ' .. C['name'] .. '\tDEVICE: ' .. C['dev'])
-        APT.exe(AOUT .. ' -j ' .. C['name'] .. ' -d ' .. C['dev']):fork()
+        __(AOUT .. ' -j ' .. C['name'] .. ' -d ' .. C['dev']):fork()
     end
     print("HW playback: cloop\tDEVICE: cloop")
     -- No idea why, cloop wont work with zita-a2j.
-    APT.exe('alsa_in  -j cloop  -d cloop'):fork()
-    --APT.exe('sleep 1'):Do()
-    --APT.exe('jack_connect cloop:capture_1 system:playback_1'):Do()
-    --APT.exe('jack_connect cloop:capture_2 system:playback_2'):Do()
+    __('alsa_in  -j cloop  -d cloop'):fork()
+    --__('sleep 1'):Do()
+    --__('jack_connect cloop:capture_1 system:playback_1'):Do()
+    --__('jack_connect cloop:capture_2 system:playback_2'):Do()
     print("HW playback: ploop\tDEVICE: ploop")
-    APT.exe('alsa_out -j ploop  -d ploop'):fork()
-    --APT.exe('sleep 1'):Do()
-    --APT.exe('jack_connect system:capture_1 ploop:playback_1'):Do()
-    --APT.exe('jack_connect system:capture_2 ploop:playback_2'):Do()
+    __('alsa_out -j ploop  -d ploop'):fork()
+    --__('sleep 1'):Do()
+    --__('jack_connect system:capture_1 ploop:playback_1'):Do()
+    --__('jack_connect system:capture_2 ploop:playback_2'):Do()
 
 
     print("")
@@ -535,39 +423,39 @@ elseif 'JACK' == args[1] then
     for  i,C in pairs(Cards) do
         for  j,c in ipairs(C['playbackDevs']) do
             print("HW playback: " .. C['name'] .. "\tDEVICE: " .. C['playbackDevs'][j])
-            APT.exe(AOUT .. ' -j ' .. C['name'] .. "_" .. C['playbackDevs'][j] .. '-in -d ' .. C['name'] .. C['playbackDevs'][j]):fork()
-    --  APT.exe('sleep 1'):Do()
-    --  APT.exe('jack_connect cloop:capture_1 ' .. C['name'] .. '_' .. C['playbackDevs'][j] .. '-in' .. ':playback_1'):Do()
-    --  APT.exe('jack_connect cloop:capture_2 ' .. C['name'] .. '_' .. C['playbackDevs'][j] .. '-in' .. ':playback_2'):Do()
+            __(AOUT .. ' -j ' .. C['name'] .. "_" .. C['playbackDevs'][j] .. '-in -d ' .. C['name'] .. C['playbackDevs'][j]):fork()
+    --  __('sleep 1'):Do()
+    --  __('jack_connect cloop:capture_1 ' .. C['name'] .. '_' .. C['playbackDevs'][j] .. '-in' .. ':playback_1'):Do()
+    --  __('jack_connect cloop:capture_2 ' .. C['name'] .. '_' .. C['playbackDevs'][j] .. '-in' .. ':playback_2'):Do()
         end
         for  j,c in ipairs(C['captureDevs']) do
             print("HW capture: " .. C['name'] .. "\tDEVICE: " .. C['captureDevs'][j])
-            APT.exe(AIN .. ' -j ' .. C['name'] .. "_" .. C['captureDevs'][j] .. '-out -d ' .. C['name'] .. C['captureDevs'][j]):fork()
+            __(AIN .. ' -j ' .. C['name'] .. "_" .. C['captureDevs'][j] .. '-out -d ' .. C['name'] .. C['captureDevs'][j]):fork()
         end
     end
     print("")
 
-    if APT.exists('aseqjoy') then
+    if _.exists('aseqjoy') then
         print("Scanning for joysticks.")
-        local sticks = APT.exe('ls -1 /dev/input/js[0-9]*'):noErr():Do()
+        local sticks = __('ls -1 /dev/input/js[0-9]*'):noErr():Do()
         for  i,l in ipairs(sticks.lines) do
             print("aseqjoy " .. l)
             -- Buttons switch to that numbered MIDI channel, defaults to 1.
             -- Axis are mapped to MIDI controllers 10 - 15
             -- -r means to use high resolution MIDI values.
-            APT.exe('aseqjoy -d ' .. l:sub(-1,-1) .. ' -r'):fork()
+            __('aseqjoy -d ' .. l:sub(-1,-1) .. ' -r'):fork()
         end
         print("")
     end
 
-    if APT.exists('jack-plumbing') then
+    if _.exists('jack-plumbing') then
         print('Stop our jack-plumbing, eventually.')
-        APT.exe('sleep 4'):Do()
-        APT.killEmAll{"jack-plumbing"}
+        __('sleep 4'):Do()
+        _.killEmAll{"jack-plumbing"}
     end
 
-    if APT.exists('~/.aataaj_JACK.lua') then
+    if _.exists('~/.aataaj_JACK.lua') then
         print('Running users aataaj_JACK.lua')
-        APT.exe('~/.aataaj_JACK.lua'):Do()
+        __('~/.aataaj_JACK.lua'):Do()
     end
 end